LG Electronics 245 User Manual

ENGLISH

USER GUIDE

LG 245

Please read this manual carefully before operating your mobile

phone. Retain it for future reference.

(

)

P/N: MMBB0232701 1.0

IMPORTANT SAFETY PRECAUTIONS

Read these instructions. Breaking the rules may be dangerous or illegal.

Further detailed information is given in this user guide.

WARNING! Violation of the instructions may cause serious injury or death.

1. Never use an unapproved battery since this could damage the phone and/or battery and could

cause the battery to explode.

2. Never place your phone in a microwave oven as it will cause the battery to explode.

3. Never store your phone in temperatures less than -4°F or greater than 122°F.

4. Do not dispose of your battery by fire or with hazardous or flammable materials.

5. When riding in a car, do not leave your phone or set up the hands-free kit near an air bag. If

wireless equipment is improperly installed and the air bag is deployed, you may be seriously

injured.

6. Do not use a hand-held phone while driving.

7. Do not use the phone in areas where its use is prohibited. (For example: aircraft)

IMPORTANT SAFETY PRECAUTIONS

1. Do not expose the battery charger or adapter to direct sunlight or use it in places with high

humidity, such as a bathroom.

2. Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean

your phone. This could cause a fire.

3. Do not drop, strike, or shake your phone severely. It may harm the internal circuit boards of the

phone.

4. Do not use your phone in high explosive areas as the phone may generate sparks.

5. Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if

it is loose as it may cause a fire or electric shock.

6. Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as

it may cause electric shock or fire.

7. Do not handle the phone with wet hands while it is being charged. It may cause an electric

shock or seriously damage your phone.

8. Do not disassemble the phone.

1. Do not place or answer calls while charging the phone as it may short-circuit the phone and/or

cause electric shock or fire.

2. Do not hold or let the antenna come in contact with your body during a call.

3. Make sure that no sharp-edged items such as animal’s teeth or nails, come into contact with the

battery. This could cause a fire.

4. Give instructions for children to use the battery carefully.

5. Be careful that children do not swallow any parts (such as rubber plugs, earphone, connection

parts of the phone, etc.) This could cause asphyxiation or suffocation resulting in serious injury

or death.

6. Unplug the power cord and charger during lightning storms to avoid electric shock or fire.

7. Only use the batteries and chargers provided by LG. The warranty will not be applied to

products provided by other suppliers.

8. Only authorized personnel should service the phone and its accessories. Faulty installation or

service may result in accidents and consequently invalidate the warranty.

9. An emergency call can be made only within a service area. For an emergency call, make sure that

you are within a service area and that the phone is turned on.

TABLE OF CONTENTS

Battery Charge Level

IMPORTANT SAFETY

PRECAUTIONS

Entering and Editing

Information

Turning the Phone On and Off

Signal Strength

Text Input

Table of Contents

Welcome

Screen Icons

Key Functions

Making Calls

Text Input Modes

T9Word (T9) Mode

Abc (Multi-tap) Mode

123 (Numbers) Mode

Symbols Mode

Correcting Dialing Mistakes

Q^Ru^ei^dcⁱk^alinA^gc^Cc^ae^lls^ss to Convenient¹⁹

Technical Details

Phone Overview

Menus Overview

Receiving Calls

Changing Letter Case

Initial Cap (T9Word/ Abc)

Caps Lock (T9WORD/ ABC)

Lower Case (T9word/ abc)

Features

Vibrate mode

Lock Mode

Text Input Examples

Getting Started with Your

Phone

Mute Function

Volume Quick Adjustment

Call Waiting

Using Abc (Multi-tap) Text Input

Using T9 Mode Text Input

The Battery

Using the NEXT Key (In T9 Mode) 24

Installing the Battery

Removing the Battery

Caller ID

Adding Words to the T9 Database 24

Speed Dialing

Charging the Battery

Phone Numbers With Pauses

Storing a Number with Pauses

7. Settings

Contacts in Your Phone’s

Memory

7.1 Auto Save

Adding a Pause to an Existing

Number

7.2 Auto Delete

The Basics of Storing Contacts

Entries

7.3 Text-Auto View

7.4 Picture-Auto Receive

7.5 Text-Callback #

7.6 Edit Voicemail #

7.7 Entry Mode

Searching Your Phone’s Memory 31

Options to Customize Your

Contacts

Making a Call From Your Phone’s

Memory

Adding or Changing the Group

Changing the Call Ringer

Using Phone Menus

Adding or Changing the Memo

7.8 Quick-Text

Menu Access

Adding or Changing the Picture ID 26

7.9 Text-Auto Play

7.0 Text Signature

8. Delete All

Adding Speed Dial

Messaging

Editing Contacts Entries

Adding Another Phone Number

Default Numbers

1. New Text Message

2. New Picture Message

Brew

3. Inbox

Editing Customized Options

1. Brew Apps

Deleting

4. Sent

2. Brew Info

Deleting a Contact Entry or a Phone

5. Drafts

Number from a Contact

6. Voicemail

Additional Ways to Delete a Contact 30

TABLE OF CONTENTS

3. Dialed

8. Ez Tip Calc

9. Stopwatch

Web

1. Start Browser

4. Data

2. Web Messages

5. All Calls

6. Call Timer

7. Data Counter

0. Unit Converter

3. Web Alerts

Settings

1. Sound

Multimedia

1. Take Picture

1.1 Ringers

My Media

1.2 Volume

2. Record Voice

1. Image

1.3 Message Alerts

1.4 Alert Type

2. Audio

Contacts

1. New Contact

Tools

1.5 Service Alerts

1.5.1 Minute Beep

1.5.2 Call Connect

1.5.3 Back To Top

2. Contact List

3. Groups

1. Voice Command

2. Calendar

4. Speed Dials

3. Alarm Clock

4. My Menu

5. World Clock

6. Notepad

1.6 Power On/Off Tones

5. My Name Card

2. Display

Recent Calls

2.1 Wallpaper

2.2 Banner

1. Missed

7. Calculator

2. Received

2.3 Backlight

2.4 Menu Styles

2.5 Languages

2.6 Dial Fonts

2.7 Clocks

4.7 TTY Mode

5. System

Safety

TIA Safety Information

5.1 Network

Exposure to Radio Frequency Signal 75

5.2 Location

Antenna Care

2.8 Color Schemes

3. Security

6. Data Settings

Phone Operation

Tips on Efficient Operation

Driving

6.1 PC Connection

6.2 Mode(1X/QNC)

6.3 PAP ID

3.1 Lock Phone

Electronic Devices

3.2 Restrict Call

Pacemakers

3.3 Emergency #s

3.4 Change Lock Code

3.5 Reset Default

4. Call Settings

6.4 PAP Password

Persons with pacemakers:

7. Bluetooth

Hearing Aids

7.1 Paired Devices

Other Medical Devices

Health Care Facilities

Vehicles

7.2 Power

4.1 Answer Options

4.2 Auto Retry

7.3 My Visibility

7.4 Bluetooth Name

7.5 Bluetooth Info

8. Memory

Posted Facilities

Aircraft

4.3 One-Touch Dial

4.4 Voice Privacy

4.5 Auto Volume

4.6 Application Mode

Blasting Areas

Potentially Explosive Atmosphere

9. Phone Info.

For Vehicles Equipped with an Air

Bag

TABLE OF CONTENTS

Safety Information

INDEX

Charger and Adapter Safety

Battery Information and Care

Explosion, Shock, and Fire Hazards 79

General Notice

Avoid damage to your hearing

FDA Consumer Update

10 Driver Safety Tips

Consumer Information on

SAR

FCC Hearing-Aid Compatibility

(HAC) Regulations for Wireless

Devices

ACCESSORIES

LIMITED WARRANTY

STATEMENT

WELCOME

Thank you for choosing the advanced and compact

LG245 cellular phone, designed to operate with the

latest digital mobile communication technology, Code

Division Multiple Access (CDMA) and Advanced

Mobile Phone Service (AMPS). Along with the many

advanced features of the CDMA system, this phone

offers:

Important Information

This user’s guide provides important information on

the use and operation of your phone. Please read all

the information carefully prior to using the phone for

the best performance and to prevent any damage to

or misuse of the phone. Any unapproved changes or

modifications will void your warranty.

Significantly enhanced voice clarity

FCC Part 15 Class B Compliance

Large, easy-to-read, 9-line backlit LCD with status

icons.

This device and its accessories comply with part 15 of

FCC rules. Operation is subject to the following two

conditions: (1) This device and its accessories may not

cause harmful interference, and (2) this device and its

accessories must accept any interference received,

including interference that causes undesired operation.

Paging, messaging, voice mail, and caller ID.

23-key keypad.

Speakerphone feature.

Menu-driven interface with prompts for easy

operation and configuration.

Any key answer, auto answer, auto retry, one-touch

and speed dialing with 99 memory locations.

Bilingual (English and Spanish) capabilities.

Bluetooth wireless technology.

Note

The Bluetooth word mark and logos are owned by the

Bluetooth SIG, Inc. and any use of such marks by LG

Electronics is under license. Other trademarks and trade

names are those of their respective owners.

TECHNICAL DETAILS

Technical Details

* TSB-74: Protocol between an IS-95A system and

ANSI J-STD-008

The LG245 is a trimode phone that operates on both

(Code Division Multiple Access CDMA) frequencies:

cellular services at 800 MHz and (Personal

1xRTT system receives twice as many subscribers in

the wireless section as IS-95. Its battery life is twice

as long as IS-95. High-speed data transmission is

also possible.

Communication Services PCS) at 1.9 GHz. Also, the

LG245 works on Advanced Mobile Phone Service. We

call it a tri-mode phone. Since the phone operates on

Cellular, PCS and AMPS, the call fail rate is less than on

a conventional dual-mode or single-mode phone.

The following table lists some major CDMA

standards.

CDMA technology uses a feature called DSSS (Direct

Sequence Spread Spectrum) that enables the phone to

keep communication from being crossed and to use

one frequency channel by multiple users in the same

specific area. This results in a 10-fold capacity increase

when compared with analog mode. In addition, features

such as soft / softer handoff, hard handoff, and

dynamic RF power control technologies combine to

reduce call interruptions.

The Cellular and PCS CDMA networks consist of

MSO (Mobile Switching Office), BSC (Base Station

Controller), BTS (Base Station Transmission System),

and MS (Mobile Station).

CDMA Standard Designator

Description

CDMA Tri-Mode Air Interface

14.4kbps radio link protocol and

inter-band operations

TIA/EIA-95A

TSB-74

Basic Air

Interface

ANSI J-STD-008

IS-95 adapted for PCS frequency

band cdma2000 1xRTT AirInterface

Advanced Mobile Phone Service

TIA/EIA-IS2000

ANSI TIA/EIA 553A

TIA/EIA/IS-634

TIA/EIA/IS/651

MAS-BS

PCSC-RS

Network

TIA/EIA/IS-41-C

Intersystem operations

Non-signaling data comm.

TIA/EIA/IS-124

TIA/EIA/IS-96-B Speech CODEC

TIA/EIA/IS-99

TIA/EIA/IS-637

TIA/EIA/IS-657

IS-801

Async Data and Fax

Short message service

Packet Data

Service

Position Determination

TIA/EIA/IS-707-A Service (gpsOne)

High Speed Packet Data

TIA/EIA/IS-97

TIA/EIA/IS-98

ANSI J-STD-018

ANSI J-STD-019

TIA/EIA/IS-125

Cellular base station

Cellular mobile station

PCS personal station

PCS base station

Performance

Speech CODEC

TECHNICAL DETAILS

FCC RF Exposure Information

components should not be used. Avoid the use of

accessories that cannot maintain 0.6 inches (1.5 cm)

distance between the user’s body and the back of the

WARNING! Read this information before operating

the phone.

phone and have not been tested for compliance with

FCC RF exposure limits.

In August 1996, the Federal Communications

Commission (FCC) of the United States, with its action in

Report and Order FCC 96-326, adopted an updated

Vehicle-Mounted External Antenna

(Optional, if available.)

safety standard for human exposure to Radio Frequency

(RF) electromagnetic energy emitted by FCC regulated

transmitters. Those guidelines are consistent with the

safety standard previously set by both U.S. and

international standards bodies.

A minimum distance of 8 inches (20cm) must be

maintained between the user / bystander and the

vehicle-mounted external antenna to satisfy FCC RF

exposure requirements. For more information about

RF exposure, visit the FCC website at www.fcc.gov.

The design of this phone complies with the FCC

guidelines and these international standards.

Caution

Bodily Contact During Operation

Use only the supplied and approved antenna. Use

of unauthorized antennas or modifications could

impair call quality, damage the phone, void your

warranty and/or result in violation of FCC

regulations.

This device was tested for typical use with the back

of the phone kept 0.6 inches (1.5 cm) from the

body. To comply with FCC RF exposure requirements,

a minimum separation distance of 0.6 inches (1.5 cm)

must be maintained between the user’s body and the

back of the phone, including the antenna, whether

extended or retracted. Third-party belt-clips, holsters,

and similar accessories containing metallic

Do not use the phone with a damaged antenna. If a

damaged antenna comes into contact with the skin

a minor burn may result. Contact your local dealer

for a replacement antenna.

PHONE OVERVIEW

1. Earpiece Lets you hear the caller.

2. Flip Open the case to answer an incoming call and close to end

the call.

3. LCD Screen Displays messages and indicator icons.

4. Left Soft Key Use to display the function setting menu.

5. SEND Key Use to place or answer calls.

6. Side Keys Use to adjust the ringer volume in standby mode and

the earpiece volume during a call.

7. BACK Key Press to delete a single space or character. Press and

hold to delete entire words. Press this key once in a menu to go

back one level.

8. Voice Command Key Use for quick access to Voice Command.

9. Manner Mode Key Use to set Manner mode (from standby mode

press and hold

for about 3 seconds).

10. Navigation Key Use for quick access to Messaging, Ringers, Brew

Apps and Mobile Web.

11. Right Soft Key Use to select an action within a menu.

12. Camera Key Use for quick access to Camera function.

13. PWR/END Key Use to turn the power on/off and to end a call.

Also use to return to the main menu display screen.

14 . Camera Key Use for quick access to Camera function.

15. Alphanumeric Keypad Use to enter numbers and characters and

select menu items.

16. Lock Mode Key Use in standby mode to set the lock function by

pressing and holding the key

for about 3 seconds.

17. Microphone Lets callers hear you.

18 . Camera Lens Projects the object when taking a picture.

19. Flash Use to add flash when taking photos.

20. Earphone Jack Allow the use of a headset to hear caller's voice.

21. Outside Display Displays the inner LCD screen.

22. Charger Port Connects the charger to the phone.

MENUS OVERVI₂E_{. D}W_{elete Sent}

Messaging

Contacts

My Media

3. Delete Drafts

1. New Contact

2. Contact List

3. Groups

1. New Text Message

2. New Picture Message

3. Inbox

1. Image

2. Audio

4. Delete All Messages

4. Speed Dials

4. Sent

Brew

5. My Name Card

Tools

5. Drafts

1. Brew Apps

6. Voicemail

1. Voice Command

2. Brew Info

7. Settings

2. Calendar

Recent calls

1. Auto Save

2. Auto Delete

3. Text-Auto View

3. Alarm Clock

4. My Menu

1. Missed

Web

2. Received

3. Dialed

1. Start Browser

2. Web Message

3. Web Settings

5. World Clock

6. Notepad

4. Picture-Auto

Receive

4. All Calls

5. Call Timer

1. Last Call

2. Home Calls

3. Roam Calls

4. All Calls

7. Calculator

5. Text-Callback #

6. Edit Voicemail #

7. Entry Mode

8. Ez Tip Calc

9. Stopwatch

0. Unit Converter

Multimedia

1. Take Picture

8. Quick-Text

2. Record Voice

6. Data Counter

1. Received Data

2. Sent Data

3. All Data

9. Text-Auto Play

0. Text Signature

8. Delete All

1. Delete Inbox

3. Emergency #s

4. Change Lock Code

5. Reset Default

4. Call Settings

1. Answer Options

2. Auto Retry

7. Bluetooth

Settings

1. Sound

1. Paired Devices

2. Power

1. Ringers

3. My Visibility

4. Bluetooth Name

5. Bluetooth Info

8. Memory

2. Volume

3. Message Alerts

4. Alert Type

3. One-Touch Dial

4. Voice Privacy

5. Auto Volume

6. Application Mode

7. TTY Mode

5. Service Alerts

6. Power On/Off Tones

1. Memory Status

2. Media Status

3. User Memory

9. Phone Info.

1. My Number

2. SW Version

3. Icon Glossary

2. Display

1. Wallpaper

2. Banner

5. System

3. Backlight

4. Menu Styles

5. Languages

6. Dial Fonts

7. Clocks

1. Network

2. Location

6. Data Settings

1. PC Connection

2. Mode(1X/QNC)

3. PAP ID

8. Color Schemes

3. Security

4. PAP Password

1. Lock Phone

2. Restrict Call

GETTING STARTED WITH YOUR PHONE

The Battery

Charging the Battery

To use the charger provided with your phone:

Note

It is important to fully charge the battery before

Warning! Use only the charger provided with the

phone. Using any charger other than the one included

with the LG245 may damage your phone or battery.

initial use of the phone.

The phone comes with a rechargeable battery. Keep

the battery charged while not in use in order to

maximize talk and standby time. The battery charge

level is shown at the top of the LCD screen.

1. Plug the end of the adapter into the phone’s

charger port and the other end into an electrical

outlet.

2. The charge time varies depending upon the

battery level.

Installing the Battery

Remove the battery cover, insert the battery into the

opening by first aligning the bottom of the battery

with the terminals near the bottom of the phone.

Align the battery cover over the battery then slide it

slightly upward until it clicks into place.

Removing the Battery

Turn the phone off. Slide the battery cover downward

and remove it. Use the opening near the top of the

battery to lift the battery out.

Battery Charge Level

Turning the Phone On and Off

The battery charge level is shown at the top right of

the LCD screen. When the battery charge level

becomes low, the low battery sensor alerts you in

Turning the Phone On

1. Install a charged battery or connect the phone to

an external power source such as a cigarette lighter

charger or hands-free car kit.

three ways: sounding an audible tone, blinking the

battery icon, and displaying a warning message. If the

battery charge level becomes exceedingly low, the

phone automatically switches off and any function in

progress is not saved.

2. Press

for about 3 seconds until the LCD

screen lights up.

Turning the Phone Off

Fully Charged

Empty

1. Press and hold

until the display turns off.

GETTING STARTED WITH YOUR PHONE

Signal Strength

Making Calls

Call quality depends on the signal strength in your

area. The signal strength is indicated on the screen

as the number of bars next to the signal strength

icon: The more bars, the better the signal strength. If

1. Make sure the phone is turned on. If not, press

for about 3 seconds.

2. Enter the phone number (include the area code if

needed).

the signal quality is poor, move to an open area. If

you are in a building, the reception may be better

near a window.

3. Press

lf the phone is locked, enter the lock code.

Call Failed - indicates the call did not go through.

Screen Icons

Restricted - indicates outgoing calls are in

restricted mode.

To see the icon glossary, go to Menu -> Settings ->

Phone Info. -> Icon Glossary on your phone.

Note

If the phone is restricted, you can only dial phone

numbers saved in the Emergency Numbers or

your Contacts list. To turn off this function:

Menu ->

Settings ->

Security ->

Lock Code ->

Restrict Call -> Off -> OK

4. Press

to end the call.

Correcting Dialing Mistakes

If you make a mistake while dialing a number, press

once to erase the last digit entered, or hold

down

for at least 2 seconds to go to the

standby mode.

Redialing Calls

1. Press

twice to redial the last number you

dialed. The last 30 numbers (dialing, incoming,

missed) are stored in the call history list and you

can also select any of these to redial.

Receiving Calls

1. When the phone rings or vibrates, press

answer.

Note

If you press

or (the side keys) while the

phone is ringing, the ringing or vibration is muted

for that call.

2. Press

twice to end the call.

QUICK ACCESS TO CONVENIENT FEATURES

Vibrate mode

Mute Function

The Mute Function is used during a phone call. To quickly

Sets the phone to vibrate instead of ring (

activate Mute press Left Soft Key

Mute, then to

displayed). To quickly set Vibrate mode press and

cancel press Left Soft Key

Unmute.

hold

. To return to Normal Mode, press and

Volume Quick Adjustment

Use the side keys to adjust the earpiece and ringer

volumes. The upper key increases the volume and the

lower key decreases the volume.

Lock Mode

Sets your phone to require a 4-digit password in

order to use the phone.

Earpiece volume can be adjusted during a call.

Ringer volume can be adjusted during a call.

Note

Until you change it, the default lock

Note

code/password is the last 4 digits of your phone

number.

Key Tone Volume is adjusted through the Sounds

Volume (Menu -> 9 -> 1 -> 2 -> 2).

To quickly lock your phone press

seconds. To cancel, press Left Soft Key

and enter the password.

for three

Unlock

Call Waiting

Speed Dialing

Your cellular service may offer call waiting. While a

Speed dialing is a convenient feature that allows you

call is in progress, two beeps indicate another

to make phone calls quickly. A number key can be

incoming call. When call waiting is enabled, you may

assigned to a specific phone number. By pressing

put the active call on hold while you answer the

and holding down a number key, your phone will

other incoming call. Check with your cellular service

recall the phone number associated from the

provider for information about this function.

Contacts list and display it briefly while

simultaneously dialing that phone number for you.

Speed Dial Number 1 is set to Voice Mailbox by

default and is unchangeable.

1. Press

to receive a waiting call.

2. Press

again to switch between calls.

Caller ID

Dialing Single Digit Speed Dials (from 2 to 9)

Press and hold the Speed Dial number.

Caller ID displays the phone number or name of the

incoming call. If the caller’s identity is stored in Contacts,

the name will appear along with the phone number.

Check with your service provider to ensure they offer

this feature.

Enter the speed dial number and press

Dialing Double Digit Speed Dials (from 10 to 99)

Press the first digit and then press and hold the

key of the last digit.

Enter the first and second digits and press

ENTERING AND EDITING INFORMATION

Text Input Modes

Text Input

You can input and edit your Banner, Schedule,

There are four modes for entering text; numbers,

Contacts, Notepad, and Messages.

special characters, and punctuation. In a text entry

field, pressing Left Soft Key

displays a pop-up

Key Functions

list of text modes.

Left Soft Key:

T9Word (T9) Mode

Press to scroll through the following text input

modes: T9Word (T9WORD/T9Word/

Also known as predictive text mode, T9 allows the

T9word) -> Abc (ABC/Abc/abc) -> 123 ->

Symbols.

phone to automatically translate keystrokes into

common words that are in the T9 internal database.

The technology allows words to be entered by a single

keypress for each letter as opposed to the multi-tap

method where selecting a single letter requires multiple

key presses.

Shift: Press to change case.

T9 text : T9Word -> T9WORD -> T9word

Abc text : Abc -> ABC -> abc

Next : In T9 mode, press to display other

matching words.

Abc (Multi-tap) Mode

Use to add words to the T9 database.

Space : Press to complete a word and insert a

space.

123 (Numbers) Mode

Clear : Press to delete a single space or

Use to type numbers using one keystroke per number.

character. Hold to delete the whole message.

Punctuation : In T9 mode, press to insert

punctuation in a word and complete a

sentence.

Symbols Mode

Text Input Examples

Use to insert special characters or punctuation.

There are 36 special characters including "SP" which

inserts a space, and "LF" which forces the text to the

beginning of the next line.

Display the text modes and select a text mode:

1. In a text entry field, press Left Soft Key

display text modes.

2. Press

use.

to use the text input mode you want to

Changing Letter Case

3. Press

to select the text input mode.

Text can be capitalized when in T9 and Abc input

mode. Press

to reach the following:

Using Abc (Multi-tap) Text Input

Initial Cap (T9Word/ Abc)

1. Press Left Soft Key

to change to Abc mode.

Only the first letter is capitalized and subsequent

letters are lower case.

2. Press

to change to ABC Caps Lock every

time for capital letters.

3. Press

Caps Lock (T9WORD/ ABC)

LG is displayed.

All letters are capitalized.

Using T9 Mode Text Input

Lower Case (T9word/ abc)

1. Press Left Soft Key

mode.

to change to T9Word

All letters are in lower case.

2. Press

3. Press

to complete the word and add a space.

ENTERING AND EDITING INFORMATION

Adding Words to the T9 Database

4. Press

If a word is not in the T9 database, add it using Abc

(multi-tap) mode text entry.

Call the office. is displayed.

1. Press Left Soft Key

tap) mode.

to change to Abc (multi-

Using the NEXT Key (In T9 Mode)

2. Press

After you have finished entering a word, if the word

displayed is not the one you want, press

display additional choices of words from the

database.

Bop is displayed.

3. Press

to erase the existing word.

4. Press

1. Press

Amp is displayed.

Good is displayed.

2. Press

The display gives you additional choices such as:

Home, Gone, Hood, etc.

CONTACTS IN YOUR PHONE’S MEMORY

Contacts Entries

Options to Customize Your Contacts

This allows you to have easy access to your most

frequently dialed phone numbers. You may store up

to 500 entries with up to 5 phone numbers each.

Each entry 'Name' may be up to 22 characters.

Once the basic phone number and name information

is stored in your Contacts, you can edit and

customize each entry.

1. Press Right Soft Key

Contacts and use

highlight the contact entry you want to edit, then

The Basics of Storing Contacts Entries

press

View

1. From standby mode enter the phone number you

want to save (up to 48 digits).

2. Press Left Soft Key

Edit to access the Edit

Contact screen.

2. Press Left Soft Key

Save.

3. Use

to highlight the information you want to

3. Press Left Soft Key and select either Save New or

customize.

Update Existing.

4. press

Save when it's done.

4. Use

to highlight a Label and press

Mobile 1

Home

Work

Mobile 2

Fax

Adding or Changing the Group

Note

Allows you to manage your Contacts entries by

Use Update Existing to add another phone

organizing them into groups.

number to a contact already stored in memory.

1. Press Right Soft Key

Contacts and use

5. Enter a name for the phone number (up to 22

highlight an entry, then press

characters) and press

2. Press Left Soft Key

to select Edit

A confirmation message is displayed briefly.

CONTACTS IN YOUR PHONE’S MEMORY

Adding or Changing the Memo

3. Use

to highlight No Group

to select a

group.

Allow you to enter up to 60 characters as a memo to

the Contact entry.

4. Use

to select the Group.

No Group

Family

Friends

Colleagues

1. Press Right Soft Key

Contacts and use

Business

School

highlight an entry, then press

5. Press

Save to save the change.

2. Press Left Soft Key

to select Edit

3. Use

to highlight Memo

Changing the Call Ringer

4. Enter text.

5. Press

Allows you to identify who is calling, by setting

Save to save the change.

different ringers for different phone numbers in your

Contacts. It is automatically set to the default ringer

when the Contact is saved.

Adding or Changing the Picture ID

Allows the phone to display an image to identify the

1. Press Right Soft Key

Contacts and use

caller.

highlight an entry, then press

1. Press Right Soft Key

Contacts and use

2. Press Left Soft Key

to select Edit

highlight an entry, then press

3. Use

to highlight Ringtone, then press Left

2. Press Left Soft Key

to select Edit

Soft Key

List.

3. Use

to highlight Picture

4. Use

to select one of the Ringtone available,

4. Press Left Soft Key

List to see additional

then press Left Soft Key

Set.

choices.

5. Press

Save to save the change.

Editing Contacts Entries

5. Use

to select one of the images available,

then press

Adding Another Phone Number

6. Press Left Soft Key

Set

From standby mode

7. Press

Save to save the change.

1. From standby mode enter the phone number you

want to save (up to 48 digits).

Adding Speed Dial

1. Press Right Soft Key

Contacts and use

2. Press Left Soft Key

Save

highlight an entry, then press

3. Select Update Existing.

2. Press Left Soft Key

to select Edit

4. Use

5. Use

to highlight the existing Contact entry,

3. Use

to highlight the phone number you want

then press

to set with a Speed Dial, then press Right Soft Key

to highlight a Label, then press

Options.

Mobile

Home

Work

Mobile2

Fax

4. Select Set Speed Dial.

6. Press

to save Contact.

CONTACTS IN YOUR PHONE’S MEMORY

Default Numbers

Editing Stored Phone Numbers

The phone number saved when a Contact is created

1. Press Right Soft Key

Contacts to display your

is the Default Number. If more than one number is

Contacts alphabetically.

saved in a Contact entry, another number can be

designated as the Default Number.

2. Use

to highlight the Contact entry you want

to edit, then press

Changing the Default Number

3. Press Left Soft Key

Edit

1. Press Right Soft Key

Contacts to display your

4. Use

to highlight the phone number.

Contacts alphabetically.

5. Edit the phone number as necessary, then press

2. Use

to highlight the Contact entry you want

to edit, then press

3. Press Left Soft Key

Edit

Editing Stored Names

4. Use

to highlight the phone number you want

1. Press Right Soft Key

Contacts alphabetically.

Contacts to display your

to set as the Default Number, then press Right

Soft Key

Options and

Set As Default

2. Use

to highlight the Contact entry you want

to edit, then press

Deleting

3. Press Left Soft Key

Edit

4. Use

to highlight the name.

Deleting a Contact Entry or a Phone Number

from a Contact

5. Edit the name as necessary.

1. Press Right Soft Key

Contacts to display your

6. Press

Save to save the change.

Contacts alphabetically.

Editing Customized Options

2. Use

to highlight the Contact entry, then press

Edit any of the Contacts options in the same manner

as when the Contact is created.

3. Press Right Soft Key

Options

1. Press Right Soft Key

Contacts alphabetically.

Contacts to display your

4. Select

5. Select

Delete

Yes

2. Use

to highlight the Contact entry you want

to edit, then press

A confirmation message is displayed.

3. Press Left Soft Key

Edit

4. Use

to highlight the information you want to

customize.

5. Edit the information as necessary.

6. Press

Save to save the change.

CONTACTS IN YOUR PHONE’S MEMORY

Additional Ways to Delete a Contact

Storing a Number with Pauses

At any time when your Contacts are displayed, the

1. Press Left Soft Key

Right Soft Key

Options allows you to erase the

2. Press

3. Press

Contacts

highlighted entry.

New Contact

Phone Numbers With Pauses

4. Enter the name (up to 22 characters) and enter a

When you call automated systems such as voice mail

or credit billing number, you often have to enter a

series of numbers to navigate through the system.

number.

5. Press Right Soft Key

Options and select

Pause

Instead of entering these numbers by hand, you can

store the numbers in your Contacts separated by

6. Enter additional number(s) then press

special pause characters (P, T). There are two

different types of pauses you can use when storing a

number:

Wait (W)

The phone stops dialing until you press Left Soft Key

Release to advance to the next number.

Pause (P)

The phone waits 2 seconds before sending the next

string of digits.

Adding a Pause to an Existing Number

Searching Your Phone’s Memory

The LG245 phone is able to perform a dynamic

search of the contents in your phone’s memory. A

dynamic search compares entered letters or numbers

against the entries in your Contacts. A matching list

1. Press Right Soft Key

Contacts to display your

Contacts alphabetically.

2. Use

to highlight the Contact entry to edit,

then press

is displayed in descending order. You can then select

a number from the list to call or edit. There are

several ways to search:

3. Press Left Soft Key

Edit

4. Use

to highlight the number.

Scrolling Alphabetically

5. Press Right Soft Key

Options

Searching by Letter

6. Press

Wait or

Pause

Scrolling Through Your Contacts

7. Enter additional number(s), then press

1. Press Right Soft Key

Contacts alphabetically.

Contacts to display your

2. Use

to scroll through the list.

CONTACTS IN YOUR PHONE’S MEMORY

Searching by Letter

Send via Bluetooth - Send a contact(vCard)

via Bluetooth. In case Bluetooth power is not

on, a notice pops up to turn Bluetooth on.

1. Press Right Soft Key

Contacts to display your

Contacts alphabetically.

2. Press (or press repeatedly) the key on the keypad

that corresponds with the search letter.

Searching Options

1. Press Right Soft Key

Contacts

2. Press Right Soft Key

Options

3. Select the search criteria (use

then press

or press the corresponding number on the

keypad):

Send Message - Send a text message or

picture message to the selected contact.

Delete - Delete the selected entry in your

Contacts.

Edit - Edit the selected contact information.

Delete All - Deletes all contacts.

From Recent Calls

Making a Call From Your Phone’s Memory

Once you have stored phone numbers in your

Contacts, you can place calls to those numbers

quickly and easily.

1. Press Left Soft Key

2. Press

Recent Calls

By pressing Send Key

after searching for a

3. Use

press

to select the type of recent call, then

phone number in Contacts or Recent Calls and

highlighting it.

Missed

Received

Dialed

Data

All Calls

By using Speed Dialing

4. Use

to select the phone number.

From Contacts

5. Press

to place the call.

1. Press Right Soft Key

Contacts to display your

Contacts alphabetically.

Speed Dialing

2. Use

to select the Contact entry, then press

For a single-digit Speed Dial, press and hold the digit

or press the digit, then press

. For a double-digit

Speed Dial, press the first digit and hold the second

3. Use

to select the phone number.

to place the call.

digit or press the first and second digits, then press

4. Press

USING PHONE MENUS

Menu Access

Note

Press

to go back one step (while accessing

Press Left Soft Key

Menu to access nine phone

a menu or selecting a setting). Changes to

settings will not be saved.

menus. There are two methods of accessing menus

and submenus:

Use the navigation key to highlight and select, or

Press the number key that corresponds to the

menu (or submenu).

For example:

1. Press Left Soft Key

2. Press the appropriate number key corresponding

Menu to display nine menu

items.

Use

to scroll through the list of menus.

to the menu item you want to select.

The submenu list will be displayed.

3. Press the appropriate number key corresponding

to the submenu you want to access.

4. Use

to highlight your preferred setting, then

press

to select it.

MESSAGING

Text messages, pages, and voicemails become

Messaging

available as soon as the phone is powered on.

Access and Options

Check types of messages by pressing the message

key

1. Press Left Soft Key

2. Press

Messaging

Make a call to the callback number by pressing

Send Key

during an Inbox message check.

3. Select a submenu.

1. New Text Message: Sends a

Read and edit messages saved in the outbox after

text message.

transmission and resend them.

2. New Picture Message: Sends

The phone can store up to 385 messages (50 inbox

text messages, 50 picture messages, 100 picture

notification messages, 50 text outbox messages, 50

picture messages, 15 text draft messages, 15 picture

draft messages). The LG245 supports up to 160

characters. The information stored in the message is

determined by phone mode and service capability.

Other limits such as available characters per message

may exist, please check with your service provider for

system features and capabilities.

a picture message.

3. Inbox: Shows the list of

received messages.

4. Sent: Shows the list of sent

messages.

5. Drafts: Shows the list of saved

and draft messages.

6. Voicemail: Shows the number

of messages in voice mailbox.

7. Settings: Sets the way of

sending and receiving

messages.

8. Delete All: Deletes all stored

messages.

MESSAGING

New Message Alert

1. New Text Message

There are three ways your phone alerts you to new

Allows you to send text messages, pages, and e-mail

messages.

transmissions. Each message has a destination

(Address 1) and information (Message). These are

1. The phone displays a message on the screen.

2. One of eight ring tones is heard, if selected.

3. 2 min reminder

dependent upon the type of message you want to

send.

The Basics of Sending a Text Message

1. Press Left Soft Key

Note

If you receive the same message twice, your

2. Enter the recipient's address.

phone deletes the older one and the new one is

stored as a Duplicate.

3. Press

to access the message screen.

4. Type your message.

5. Press

Send.

A confirmation message is displayed.

MESSAGING

Customizing the Text Message Using Options

Text Options

While you are composing the text of a message you

1. Create a new message.

can insert customized text.

2. Press Right Soft Key

Options

1. Create a new message.

3. Select the option(s) to customize.

2. Use

to highlight Message, and then press

Contacts

To select a recipient from

3. Press Right Soft Key

Options

your Contacts list.

4. Select the option(s) to customize.

Recent Calls

To select a recipient from

Add

Graphic

Animation

Sound/

your Recent calls.

Quick-Text

Signature

Recent Messages

Groups

Inbox/ Sent

Text Format

Alignment

Style

Background

Font Size

Font

Text Color

Select a recipient from your

Groups.

Save As

Draft Quick-Text

Normal High

On Off

Enhanced

No Group Family/ Friends/

Colleagues

Business/

Priority Level

Callback #

Delivery Notice

Cancel

School

Cancel

Cancels editing your message.

Normal

Cancels editing your message.

4. Complete and send the message.

5. Complete and send or save the message.

MESSAGING

Message Icon Reference

2. New Picture Message

Allows you send messages with Text, Picture and Sound.

Text Message

1. Press Left Soft Key

Multi Picture Message delivered

Delivered Picture Message

Failed Multi Text/Picture Messages

Failed Text/Picture Messages

Multi Messages Pending

Sent Message Pending

Multi Text/Picture Messages in transfer

Read SMS/EMS

2. Use Right Soft Key

recipient's address.

Options to search for the

3. Enter the recipient's address.

4. Press

to access the message screen.

5. Type your message (text or e-mail).

6. With the highlight on Image, press Left Soft Key

Add

Unread

7. Use

to highlight a picture, then press Left

Soft Key

Set

Sent Text/Picture Messages

Locked message

8. With the highlight on Audio, press Left Soft Key

Add

9. Use

to highlight a sound, then press Left Soft

Key

Set

Or you can record your own voice memo by pressing

Left Soft Key

message.

Voice and send it with your

MESSAGING

* Editing Audio

10. Press Right Soft Key

Options

Preview

Add Slide

Go to

Save As Draft

11. Select the option(s) to customize.

Priority Level

Delivery Notice

Remove

Cancel

* Editing the Receiver

* Editing Subject

Contacts Recent Calls/ Recent Messages/

Preview

Add

Go to

Save As

Priority Level/

Groups Online Album/ Cancel

Delivery Notice

Remove

Cancel

* Editing the Text

12. Press

to send.

Preview

Add

Go to

Shows your message before sending.

Message Icon Reference

Quick Text Signature/ Slide

Previous Slide/ Next Slide

Picture Message

Save As

Priority Level

Draft

Quick-Text

High

Unread Picture Message

Read Picture Message

Normal

Read Picture Message Notification

Delivery Notice Informs you that the message has

been successfully delivered to the

recipient.

Unread Picture Message Notification

Sent Picture Message

Enhanced Normal

Remove

Cancel

Image/ Audio/ Slide

Delivered Picture Message

Failed Picture Message

Cancels the contents of the

Multiple Recipient Failed Picture Message

message field.

Multiple Recipient Incomplete Picture Message

* Editing Image

Preview Add Slide/ Go to/ Save As Draft/

Priority Level Delivery Notice/ Remove/ Cancel

MESSAGING

4. While viewing the selected message, press Left

3. Inbox

Soft Key

Reply or Right Soft Key

Options

The phone alerts you in 2 ways when you receive a

new message by:

Options from here:

Delete

Displaying a message notification on the screen.

Deletes the selected message.

Forwards a received message

Displaying the message icon

when the message is urgent).

(It blinks

Forward

to other destination

address(es).

Save Contact

Stores the callback number,

e-mail address, and number

extracted from the received

message into your Contacts.

Received text messages, page messages, picture

messages and e-mail lists may be searched and the

contents viewed. Received messages are displayed

from newest to oldest.

Lock

Locks or unlocks the selected

message.

Viewing Your Inbox

Up to 50 received messages can be stored in the Inbox.

Information

Shows the message type

priority and status.

1. Press Left Soft Key

2. Use

to highlight an Inbox message.

Left Soft Key

Reply complying with the

kinds of messages (text/ picture).

Right Soft Key

Options

3. Use

to highlight an Inbox message, then press

MESSAGING

Message Info

Shows the message type

4. Sent

priority and status.

Up to 50 sent text or picture messages can be

Delete Multiple

Selective/ All

stored in the Outbox. View lists and contents of sent

messages and verify whether the transmission was

successful or not.

1. Press Left Soft Key

2. Use

to highlight an Outbox message.

Press Left Soft Key

Resend

Press Right Soft Key

Options

3. Use

to highlight an Outbox message, then

press

. While viewing the selected Outbox

message, press Left Soft Key

Resend to or

press Right Soft Key

Options

Delete

Deletes the selected message.

Forward

Forwards a received message

to other destination

address(es).

Save Contact

Lock

Save New

Update Existing

Locks or unlocks the selected

message.

MESSAGING

5. Drafts

6. Voicemail

Allows you to view new voice messages recorded in

the voice mail box. Your phone will alert you when

you receive a new voice message.

Displays saved messages and draft messages.

1. Press Left Soft Key

2. Use

to highlight a Saved message.

Checking Your Voicemail Box

Press

Edit

1. Press Left Soft Key

Press Right Soft Key

Options

2. Options from here:

Delete

Deletes the selected message

Press Left Soft Key

Clear to delete

from the Drafts.

information, then select Clear Count.

Save Contact

Lock

Save New

Update Existing

Press

to listen to the message(s).

Locks a message so that it is

not erased if the Erase Saved

or Erase All feature is used.

Delete Multiple

Selective/ All

MESSAGING

7.4 Picture-Auto Receive

7. Settings

Allows you to set pictures to be received

Allows you to configure 10 settings for received

automatically. (On/ Off)

messages.

1. Press Left Soft Key

7.5 Text-Callback #

Allows you to automatically send a designated

callback number when you send a message. Allows

you to manually enter the number. (On/ Off/ Edit)

2. Use

to highlight one of the settings and press

to select it.

Message Settings Submenu Descriptions

7.6 Edit Voicemail #

Allows you to manually enter the number for Voice

Mail Service. This number should be only used when

a VMS access number is not provided from the

network. (Enter Number)

7.1 Auto Save

Allows you to automatically save sent messages in

your Outbox. (Auto Save/ Prompt/ Do Not Save)

7.2 Auto Delete

7.7 Entry Mode

With this feature on, read messages(except locked

messages) are automatically deleted when you

exceed the storage limit. (On/ Off)

Allows you to select the default input method.

(T9Word/ Abc/ 123 )

7.8 Quick-Text

7.3 Text-Auto View

Allows you to insert default or customized text

phrases. These text strings allow you to reduce

manual text input into messages.

Allows you to directly display the content when

receiving a message. (On/ Off)

MESSAGING

7.9 Text-Auto Play

8. Delete All

With this feature on, the display automatically scrolls

Allows you designate a signature to be automatically

sent with your messages. You can create a custom

signature line or use your Contact Info.

(On/ Off/ Edit)

Allows you to erase all the messages stored in your

down while viewing messages. (On

Off

)

Inbox, Sent, or Saved messages folders. You can also

erase all of these at the same time.

7.0 Text Signature

1. Press Left Soft Key

Press

Delete Inbox to erase all messages

stored in the Inbox.

Press

Delete Sent to erase all messages

stored in the Outbox.

Press

Delete Drafts to erase all messages

stored in the Saved messages folder.

Press

Delete All Messages to erase all

messages stored in the Inbox, Outbox, and

Saved messages folder.

BREW

answer the call. When you complete your call, you

Brew

can resume using the application.

Brew Apps allows you to do more than just talk on

your phone. Brew Apps is service that allows you to

download and use applications on your phone. With

Brew Apps, it is quick and easy to personalize your

Access and Options

1. Press Left Soft Key

phone to your lifestyle and tastes. Just download the

applications that appeal to you. With a wide range of

software available, from ringtones to games to

2. Press

Brew

3. Select a sub-menu.

productivity tools, you can be assured that you can

find something useful, practical, or down right

entertaining.

1. Brew Apps: To add, delete, or

disable Brew Apps

applications.

Downloading Applications

2. Brew Info: To view information

You can download applications and use Brew Apps

about Brew Apps applications.

wherever service is available, see map for details.

Incoming Calls

While downloading an application, incoming calls will

automatically be sent to your voice mail, if available.

If you do not have voice mail, downloading will not be

interrupted by an incoming call, and the caller will

receive a busy signal.

When using applications, an incoming call will

automatically pause the application and allow you to

BREW

Managing Your Brew Apps Applications

1. Brew Apps

Add new applications and remove old ones at any

Allows you to download selected applications while

time.

displaying the entire application list retrieved from

the Brew Apps server connection.

Removing Brew Apps Applications

1. Press Left Soft Key

By deleting an application you will restore memory

2. Press

capacity to the phone. To restore an application once

it has been removed will require that you pay and

download it again.

3. Select [Brew Apps] Icon and press

1. Access Brew Apps

Shortcut

Pressing the right arrow key

will start Axcess Apps.

2. Use

3. Use

to select Settings, then press

to highlight Manage Apps, then press

2. Brew Info

Gives you information about the Brew Apps selection

4. Use

to highlight the application to be deleted,

key.

then press

1. Press Left Soft Key

5. Use

to select Remove, then press

2. Press

3. Press Left Soft Key

Yes

WEB

1. Start Browser

Web

Allows you to initiate a MiniBrowser session.

The Mobile Web feature allows you to view internet

content. Access and selections within this feature are

dependent upon your service provider. For specific

1. Press Left Soft Key

2. After a few seconds, you see the Home Page.

information on Mobile Web access through your

phone, contact your service provider.

Ending a MiniBrowser Session

Access and Options

End a MiniBrowser session by pressing

1. Press Left Soft Key

Navigating Through the Browser

2. Press

Web

On-screen items may be presented in one of the

following ways:

3. Select a sub-menu.

Numbered options

1. Start Browser

2. Web Messages

3. Web Alerts

You can use your numeric keypad or you can

select the items by moving the cursor and pressing

the appropriate Soft Key(s).

Links embedded in content

You can act on the options or the links by using

the Soft Keys just below the display screen.

Text or numbers

You can select the items by moving the cursor and

pressing the appropriate Soft Keys.

WEB

Scrolling

Soft Keys

Use

to scroll through the content if the current

To navigate to different screens or select special

page does not fit on one screen. The currently

functions, use the Soft Keys. The function associated

selected item is indicated by a cursor on the screen.

with the Soft Keys can change for each page and

depends on each highlighted item.

Fast Scrolling

Left Soft Key

Press and hold

to quickly move the cursor up

and down on the current screen.

Left Soft Key

is used primarily for first options or

selecting an item but its function may change,

depending on the content displayed.

Scrolling by Page

Press the Side Keys to move up and down a page at a

Right Soft Key

time.

Right Soft Key

is used primarily for secondary

Home Page

options or a menu of secondary options.

Press and hold or

to access the Home Page.

Entering Text, Numbers, or Symbols

When prompted to enter text, the current text entry

method appears above the Right Soft Key

Alpha, Symbol, Number, Word, or Smart. To change

the input mode, press the Right Soft Key

To change to upper case, press

The text method appears above the Right Soft Key

ALPHA, WORD

, or

SMART

WEB

Clearing Out Text/Number Entered

3. Web Alerts

When entering text or numbers, press

to clear

Allows you to select a browser alert sound.

Web Alerts Mute/ 2 beeps/ 4 beeps

the last number, letter, or symbol. Press and hold

1. Press Left Soft Key

to clear the input field completely.

2. Select an alert option.

Initiating a Phone Call From Mobile Web

You can make a phone call from Mobile Web if the

site you are using supports the feature (the phone

number may be highlighted and Left Soft Key

appears as Call). The browser connection is

terminated when you initiate the call. After you end

the call, your phone returns to the screen from which

you initiated the call.

2. Web Messages

Allows you to view Web messages. If there are any

browser messages, the list is displayed from newest

to oldest.

1. Press Left Soft Key

Your list of Web messages is displayed.

MULTIMEDIA

1. Take Picture

Multimedia

1. Press Left Soft Key

View, take, and trade your digital pictures and video

right from your wireless phone.

Note

Access and Options

Pressing the side Camera key from standby mode

is a hot key to Take Picture.

1. Press Left Soft Key

2. Set the brightness

, zoom

and press Right

2. Press

Multimedia

Soft Key

Options to change other settings.

3. Select a submenu.

Select the option(s) to customize.

1. Take Picture

2. Record Voice

Resolution

640X480/ 320X240/

176 X 144

Quality

Fine/ Normal/ Economy

Zoom

Brightness

Flash

Always On/ On This Shot/ Off

On/ Off

Night Mode

Self Timer

White Balance

3 Seconds/ 5 Seconds

Auto/ Sunny/ Cloudy/

Tungsten/ Fluorescent

Filter Effects

Color/ Sepia/ Mono/

MULTIMEDIA

Negative/ Vivid

None/ Sound 1/Sound 2

On/ Off

2. Record Voice

Shutter Sound

Template

Allows you to add, listen to, and erase short verbal

reminders.

Note

1. Press Left Soft Key

When the Flash is On, take the photo within 12

2. Press

Record to record a new voice memo.

inches of the subject.

3. Talk into the microphone, then press

Stop

3. Take a picture by pressing

The default memo title is the date and time of

4. Press

Save

recording.

The picture is stored in Camera Gallery

4. While the highlight is still on the recording, press

Using the Side Camera Key

Right Soft Key

Options to access the

following:

You can use the Side Camera Key

to initiate the

camera.

Set As

Rename

Delete

1. Press the Side Camera Key

for about 3

seconds to enter the Take Picture mode.

2. Take a picture by pressing Side Camera Key

CONTACTS

1. New Contact

Contacts

Allows you to add a new contact to your Contacts.

The Contacts Menu allows you to store names,

phone numbers and other information in your

phone’s memory. When you access your Contacts,

the number in parentheses represents the number of

entries you have stored (up to 500).

Note

Using this submenu, the number is saved as a

new Contact. To save the number into an existing

Contact, edit the Contact entry.

Access and Options

1. Press Left Soft Key

[Menu]

2. Enter the name, then press

2. Press

Contacts

3. Select the information you want.

4. Enter the number, then press

3. Select a submenu.

1. New Contact

2. Contact List

3. Groups

5. Continue saving the entry as necessary.

4. Speed Dials

5. My Name Card

CONTACTS

2. Contact List

3. Groups

Allows you to view your Contacts list.

Allows you to view your grouped Contacts, add a new

group, change the name of a group, or delete a

whole group.

1. Press Left Soft Key

2. Options from here:

1. Press Left Soft Key

Press

to scroll through your Contacts

2. Options from here:

alphabetically.

Use

to highlight a group to view, then press

Press Right Soft Key

Options to select one

of the following:

Press Left Soft Key

Members to add a new

Send Message Delete/ Edit/ Delete All/

Send via Bluetooth

member to the group.

Use

to highlight a group, then press Right

Press Left Soft Key

New to store new

contact information.

Soft Key

Options to change the name of

the group or delete the group.

Delete

Send Message

Rename Group

Set Ringtone

Delete All

CONTACTS

4. Speed Dials

5. My Name Card

Allows you to view your Speed Dials list, designate

Allows you to view all of your personal Contact

new Speed Dials, or remove Speed Dial designations

information including name, phone numbers, and

email address.

entered in your Contacts.

1. Press Left Soft Key

2. Use

to highlight the Speed Dial position (or

to highlight the number, then press

2. Use

to select the feature you want to edit.

enter the Speed Dial digit), then press

3. Edit the information as necessary and press

3. Use

4. Use

to highlight the Contact.

Note

You cannot edit phone number, but you can add

an additional phone number.

A confirmation message is displayed.

RECENT CALLS

5. All Calls

Recent Calls

6. Call Timer

The Recent Calls Menu is a list of the last phone

numbers or Contact entries for calls you placed,

7. Data Counter

accepted, or missed. It is continually updated as new

numbers are added to the beginning of the list and

the oldest entries are removed from the bottom of

the list.

1. Missed

Note

To view a quick list of all your recent calls, press

Allows you to view the list of missed calls; up to 30

Send Key

from standby mode.

entries.

1. Press Left Soft Key

Access and Options

2. Use

to highlight an entry.

1. Press Left Soft Key

2. Press

Recent Calls

2. Received

3. Select a submenu.

Allows you to view the list of incoming calls; up to 30

entries.

1. Missed

2. Received

3. Dialed

4. Data

1. Press Left Soft Key

2. Use

to highlight an entry.

RECENT CALLS

3. Dialed

5. All Calls

Allows you to view the list of outgoing calls; up to 30

Allows you to erase selected call list(s).

entries.

1. Press Left Soft Key

2. The history of all calls are displayed.

2. Use

to highlight an entry.

to view the entry.

6. Call Timer

Press

Allows you to view the duration of selected calls.

Press Send Key

to place a call to the number.

1. Press Left Soft Key

Press Right Soft Key

Options (for call lists) to

2. Use

to highlight a call list, then press

select Save

Delete

Call

Delete All

View Timer

Last Call

Home Calls

Roam Calls

All Calls

Press End Key

to return to the standby mode.

7. Data Counter

4. Data

Allows you to view the list of received and

Allows you to view the list of data calls; up to 30

entries.

transmitted data calls.

1. Press Left Soft Key

2. Use

to highlight a data call list, then press

2. Use

to highlight an entry.

Received Data

Sent Data

All Data

MY MEDIA

1. Image

My Media

Allows you to select images to customize your

This menu allows you to use a wide variety of images,

phone's Main Screen, Front Screen, or Picture ID.

sounds, and more.

1. Press Left Soft Key

Access and Options

2. Select Camera Gallery

Downloaded

Default

1. Press Left Soft Key

then press

2. Press

My Media

3. Select the image you want to display.

3. Select a submenu.

2. Audio

1. Image

2. Audio

Allows you to choose audio clips.

1. Press Left Soft Key

2. Select Recorded Audio

Downloaded

Default

then press

TOOLS

1. Voice Command

Tools

Allows you to make phone calls quickly and easily by

Your phone tools include a Voice Command,

voice. Your phone recalls the number from your

Calendar, Alarm Clock, My Menu, World Clock,

Notepad, Calculator, Ez Tip Calc, Stopwatch and Unit

Converter.

Contacts, displays it briefly, and then dials it. This menu

also includes feature for those who are driving or blind.

It delivers time information by voice and allows you to

check missed calls, messages and voicemails.

Access and Options

1. Press Left Soft Key

2. Press

Tools

2. When prompted, say “Call Someone”.

3. Select a submenu.

3. When prompted, say the name of the Contact you

want to call. The phone will ask you to confirm the

name before dialing.

1. Voice Command

2. Calendar

Call Someone Digit Dial/ Voicemail/

3. Alarm Clock

Missed Calls Messages/ Time & Date

4. My Menu

5. World Clock

6. Notepad

7. Calculator

8. Ez Tip Calc

9. Stopwatch

0. Unit Converter

TOOLS

2. Calendar

3. Alarm Clock

Allows you to conveniently keep and access your

Allows you to set one of five alarms. The current time

agenda(s). Simply store your appointments and your

is displayed at the top of the screen when you select

phone will alert you with a reminder of your

an alarm to set. At the alarm time, Alarm 1 (or 2 or

appointment.

3, as applicable) will be displayed on the LCD screen

and the alarm will sound.

1. Press Left Soft Key

2. Use

to highlight the scheduled day.

2. Use

to highlight the alarm number.

Moves cursor to the left.

Moves cursor to the right.

Moves to the previous week.

Moves to the next week.

3. Set the time for alarm.

4. Use

to highlight Repeat (recurring setting).

5. Press

to select one of the following.

3. Press Left Soft Key

New

Once

Daily/ Mon - Fri/ Weekends

4. Enter your schedule information including:

6. Use

to highlight Set Period(ring type setting)

Time

Topic

and press Left Soft Key

Reminder

Set Period

Repeat

7. Use

to highlight Ringtone, press Left Soft Key

Ringtone

Set and select a ringtone.

5. Press

Save

8. Press

Save

TOOLS

4. My Menu

6. Notepad

Lets you access to favorite menu quickly by customizing

Allows you to add, read, edit, and erase notes to

my menu. Max 12 items can be stored in My Menu.

yourself.

1. Press Left Soft Key

2. Press Left Soft Key

2. Select the menu of your choice by using

, then

New to write a new note.

press

3. Type the note, then press

3. Select the Menu to add to My Menu with

A confirmation message displays briefly, then

displays your list of notes.

then press

Viewing a Notepad Entry

1. Access Notepad and highlight the entry.

5. World Clock

2. To erase, press Right Soft Key

Options

Allows you to determine the current time in another

time zone or country.

Delete

1. Press Left Soft Key

2. Press Right Soft Key

Edit

Cities to move the time

Delete all

bar across the world map and display the

date/time in that location.

To edit highlight the entry, then press

View

and press Left Soft Key

Edit. Or press Right

3. Press Left Soft Key

Set DST

Soft Key

Options and

Edit.

TOOLS

7. Calculator

9. Stopwatch

Allows you to perform simple mathematical

Stopwatch is available just as common stopwatches

calculations. You can enter numbers up to the fifth

we see and use in daily life.

decimal place.

1. Press Left Soft Key

2. Press

stop.

Start to start, and press

Stop to

2. Enter data.

Use keypad to enter numbers.

You can use the Lap function using Right Soft

Key

Lap. Max. 20 lap time is available. And

Use

to enter decimals.

lap time can be recorded.

Press Left Soft Key

to clear the entry.

to enter operator.

3. Press Left Soft Key

Reset to reset.

Press Right Soft Key

Use Navigation Keys to enter functions.

0. Unit Converter

Press

to complete equation.

Allows you to measure Length, Area, Mass, Volume

and Temperature.

8. Ez Tip Calc

1. Press Left Soft Key

Allows you to quickly and easily estimate the initial

amounts for a bill with the calculated amount of the

bill, the amount and percentage of the tip, and the

number of people as variables.

1. Press

SETTINGS

1. Sound

Settings

Options to customize the phone’s sounds.

The Settings Menu has options to customize your

phone.

1.1 Ringers

Access and Options

Allows you to assign ringtones for incoming calls.

1. Press Left Soft Key

2. Select All Calls

Caller ID

No Caller ID

2. Press

Settings

Restricted Calls

3. Select a submenu.

3. Use

to select a ringer, then press

1. Sound

2. Display

3. Security

1.2 Volume

Allows you to set various volume settings.

1. Press Left Soft Key

4. Call Settings

5. System

6. Bluetooth^®

2. Select Master Volume

Key Tone Volume

Earpiece Volume

Specker Volume

3. Use

to adjust the volume of the ringer, then

7. Memory

press

to save the setting.

8. Phone Info.

SETTINGS

1.5.1 Minute Beep

1.3 Message Alerts

Alerts you 10 seconds before the end of every

Allows you to select the alert tones type for a new

minute during a call.

message.

1. Press Left Soft Key

1.5.2 Call Connect

2. Select Text Messages

Picture Messages

Alerts you when the call is connected.

Voicemail

All Messages

Message Reminder

1.5.3 Back To Top

3. Use

to select a setting, then press

Alerts you when you scroll to the end of a menu list.

1.4 Alert Type

3. Use

to set On

Off, then press

Allows you to select the alert types.

1.6 Power On/Off Tones

1. Press Left Soft Key

Allows you to set the phone to sound a tone when

the phone is powered on and off.

2. Select a tone style, then press

1. Press Left Soft Key

Call Alert

Message Alert

Schedule Alert

Alarm Alert

2. Use

to set to On

Off, then press

1.5 Service Alerts

Allows you to set any of the 5 Alert options to On or Off.

1. Press Left Soft Key

2. Select an alert option.

SETTINGS

2.3 Backlight

2. Display

Allows you to set the duration for illuminating the

Options to customize the phone’s display screen.

backlight.

2.1 Wallpaper

1. Press Left Soft Key

Allows you to choose the kind of background to be

2. Choose a submenu, then press

displayed on the phone.

1. Press Left Soft Key

Main Screen/ Front Screen/ Keypad

2. Select Main Screen

Front Screen, then press

2.4 Menu Styles

Allows you to view the Menu as an Icon or List

display.

3. Select the desired picture, then press

1. Press Left Soft Key

4. Press

2. Select Icon or List and press

5. Left Soft Key

Set

2.5 Languages

2.2 Banner

Allows you to set the bilingual feature according to

your preference. Choose between English and

Spanish.

Allows you to enter a string of up to 12 characters

which will display on the LCD screen.

1. Press Left Soft Key

2. Select Main Screen

Front Screen

2. Use

to select English or Spanish, then press

3. Enter your banner text, then press

SETTINGS

2.6 Dial fonts

2.8 Color Schemes

Allows you to set the size and color of the font only

Allows you to choose the color of the background

for calling digits and text editor.

screen.

1. Press Left Soft Key

2. Select a submenu.

1. Press Left Soft Key

2. Select Style 1

Style 2

Style 3, then press

Normal Large

3. Press

to choose a setting, then press

save.

2.7 Clocks

Allows you to select the type of clocks displayed on

the main LCD or sub LCD.

1. Press Left Soft Key

2. Choose a Clock submenu and press

Main Screen/ Front Screen

3. Use

to set desired clock display.

SETTINGS

On Power Up

The phone is locked when it is

turned on.

3. Security

The Security menu allows you to secure the phone

electronically.

3.2 Restrict Call

Allows you to restrict incoming and/or outgoing calls.

3.1 Lock Phone

Keeps your phone from unauthorized use. Once the

phone is locked, it is in restricted mode until the lock

code is entered. You can receive phone calls and still

Note

You can receive the incoming calls from saved

contacts on your phone.

make emergency calls.

You can modify the lock code by setting a New Lock

1. Press Left Soft Key

code within the Security menu.

2. Enter the four-digit lock code and press

1. Press Left Soft Key

3. Press

4. Use

Restrict Call

2. Enter the four-digit lock code and press

The default lock code is commonly the last 4 digits of

your phone number.

to select 1 On

2 Off, then press

3. Press

Lock Phone

4. Use

to select an option, then press

Unlock

The phone is never locked

(Lock mode can be used).

Lock

The phone is always locked.

When locked, you can receive

incoming calls and make only

emergency calls.

SETTINGS

3.3 Emergency #s

3.5 Reset Default

Allows you to enter 3 emergency numbers. You can

Allows you to reset your phone to the factory default

call these emergency numbers and 911, even when

the phone is locked or restricted.

settings.

1. Press Left Soft Key

2. Press

Reset Default

2. Press

Emergency #s

3. Read the instruction and press

to continue.

3. Press

to edit the emergency numbers.

4. A message pops up that reads all settings will

revert to factory default and select Revert/

3.4 Change Lock Code

Cancel

Allows you to enter a new four-digit lock code.

1. Press Left Soft Key

2. Enter the four-digit lock code and press

3. Press

Change Lock Code

4. Enter a new 4-digit lock code and press

5. For confirmation, it will ask you to enter the new

lock code again.

SETTINGS

4.3 One-Touch Dial

4. Call Settings

Allows you to initiate a speed dial call by pressing

and holding the speed dial digit. If set to Off, Speed

Dial numbers designated in your Contacts will not

function.

The Call Settings menu allows you to designate how

the phone handles both incoming and outgoing calls.

4.1 Answer Options

Allows you to determine how to handle an answered

1. Press Left Soft Key

call.

2. Use

to select a setting, then press

1. Press Left Soft Key

On/

Off

2. Use

to select a setting, then press

4.4 Voice Privacy

Flip Open

Any Key

Send Only

Auto Answer

Allows you to set the voice privacy feature for CDMA

4.2 Auto Retry

calls as Enhanced or Standard. CDMA offers inherent

voice privacy. Check with your service provider for

availability.

Allows you to set the length of time the phone waits

before automatically redialing a number when the

attempted call fails.

1. Press Left Soft Key

2. Use

to select a setting, then press

2. Use

to select a setting, then press

Enhanced

Standard

Off

Every 10 Seconds

Every 30 Seconds

Every 60 Seconds

SETTINGS

4.5 Auto Volume

4.7 TTY Mode

Provides a better audio experience by enabling the

Allows you to attach a TTY (Teletype writer) device

Auto Volume feature to control the dynamic range

enabling you to communicate with parties also using

and volume of the sending and receiving voice across

a TTY device. A phone with TTY support is able to

different levels of speaker and environments.

translate typed characters to voice. Voice can also be

translated into characters and then displayed on the

TTY.

1. Press Left Soft Key

2. Use

to select a setting, then press

1. Press Left Soft Key

Off

2. Read the instruction and press

to continue.

4.6 Application Mode

3. Use

to select a setting, then press

Allows you to use the general application and

TTY Full

TTY + Talk

TTY + Hear

TTY Off

restricts the output of RF communication.

1. Press Left Soft Key

2. Read the instruction and press

to continue.

3. Use

to select a setting, then press

Off

SETTINGS

5.1.3 Auto NAM

5. System

Allows the phone to automatically switch between

programmed telephone numbers corresponding to

the service provider area.

The System menu allows you to designate specific

system network settings.

5.1 Network

1. Press Left Soft Key

5.1.1 System Select

2. Use

to select On or Off, then press

Allows you to set up the phone producer’s

5.1.4 Serving System

management environment. Leave this setting as the

default unless you want to alter system selection as

instructed by your service provider.

Identifies the channel number of a system that is

served as a SID Number. This information should only

be used for technical support.

1. Press Left Soft Key

2. Use

to select Home only

Automatic A

5.2 Location

Automatic B, then press

Menu for GPS (Global Positioning System: Satellite

5.1.2 Set NAM

assisted location information system) mode.

Allows you to select the phone’s NAM (Number

Assignment Module) if the phone is registered with

multiple service providers.

1. Press Left Soft Key

2. Use

to select a setting, then press

Location On

E911 Only

1. Press Left Soft Key

Note

2. Use

to select NAM1 or NAM2, then press

GPS satellite signals are not always transmitted,

especially under bad atmospheric and

environmental conditions, indoors etc.

SETTINGS

6.2 Mode (1X/QNC)

6. Data Settings

This is setting enables you to set the speed for WAP,

This menu allows you to use wireless data

BREW and Tethered Mode.

communication services. Wireless data

communication services refers to the utilization of

1. Press Left Soft Key

subscriber terminals for access to the internet with

2. Use

to select a setting, then press

personal computers or laptops at 19.2 Kbps or at a

maximum of 230.4 Kbps. The connection speed

depends on your carrier’s network and other

Auto/ 1x only/ QNC only

6.3 PPP ID

variables. Check that communications information

specifications match the network.

It is the user’s ID for PPP Authentication Protocol.

1. Press Left Soft Key

6.1 PC Connection

Allows you to select the data port.

6.4 PPP Password

1. Press Left Soft Key

It is the user’s password for PPP Authentication

Protocol.

2. Use

to select a setting, then press

1. Press Left Soft Key

USB/ RS-232C(COM Port)/ Bluetooth/ Closed

SETTINGS

7. Bluetooth^®

7.1 Paired Devices

Pairing is the process that allows the handset to

locate, establish and register 1-to-1 connection with

the target device.

The LG245 is compatible with devices that support

the Bluetooth headset and hands-free profile(s)*.

You may create and store 20 pairings within the

LG245 and connect to one device at a time. The

For pairing new Bluetooth^®device

approximate communication range for Bluetooth

wireless technology is up to 30 feet (10 meters).

1. Press Left Soft Key

Note

2. Follow the Bluetooth accessory instructions to set

Read user guide of each Bluetooth accessory

that you are trying to pair with your phone

because the instructions may be different.

the device to pairing mode.

3. Press

for paired Devices and press the Left

Soft Key

for Search. Select New Search and

press

Note

4. If Bluetooth power is set to off, you will be

The Bluetooth features of this handset may not

be compatible with all devices which are

Bluetooth enabled; your service provider or

prompted to turn power on. Select Yes

and

press

handset manufacturer cannot be responsible for

compatibility with devices not sold by the service

provider or handset manufacturer.

5. The device will appear in the Found Devices menu

once it has been located. Highlight the device and

press

6. The handset will prompt you for the passkey.

Consult the Bluetooth accessory instructions for

the appropriate passkey (typically “0000” - 4

SETTINGS

7.3 My Visibility

zeroes). Enter the passkey and press

Allows you to set Yes/No.

7. Once pairing is successful, select Yes

and

1. Press Left Soft Key

press

to connect with the device.

2. Use

to select a setting, then press

8. Once connected, you will see the device listed in

Visible

Hidden

the Paired Devices menu and the Bluetooth

connected icon

will show up on your idle

Note

screen.

If you turn on My Visibility, your device is able to

be searched by other in-range Bluetooth devices.

7.2 Power

7.4 Bluetooth Name

Allows you to set the power On/Off.

Allows you to edit the name of the Bluetooth device.

1. Press Left Soft Key

2. Use

to select a setting, then press

2. Hold down

to clear the existing name.

Off

3. Use the numeric keypad to enter a new custom

Note

name.

By default, your device’s Bluetooth functionality

4. Press

to save and exit.

is turned off.

7.5 Bluetooth Info

Allows you to view the information of the Bluetooth.

1. Press Left Soft Key

SETTINGS

8. Memory

Allows you to check out the memory status of your

phone.

1. Press Left Soft Key

2. Select Memory Status

Media Status

User

Memory

9. Phone Info.

The Phone Info. menu provides you with specific

information pertaining to your phone model.

1. Press Left Soft Key

2. Select a submenu.

My Number

SW Version

Icon Glossary

SAFETY

Those standards were based on comprehensive and

TIA Safety Information

periodic evaluations of the relevant scientific

The following is the complete TIA Safety Information

literature. For example, over 120 scientists, engineers,

for wireless handheld phones.

and physicians from universities, government health

agencies, and industry reviewed the available body of

research to develop the ANSI Standard (C95.1).

Exposure to Radio Frequency Signal

Your wireless handheld portable phone is a low power

radio transmitter and receiver. When ON, it receives

and sends out Radio Frequency (RF) signals.

The design of your phone complies with the FCC

guidelines (and those standards).

Antenna Care

In August, 1996, the Federal Communications

Commissions (FCC) adopted RF exposure guidelines

with safety levels for handheld wireless phones.

Those guidelines are consistent with the safety

standards previously set by both U.S. and

international standards bodies:

Use only the supplied or an approved replacement

antenna. Unauthorized antennas, modifications, or

attachments could damage the phone and may

violate FCC regulations.

ANSI C95.1 (1992) *

NCRP Report 86 (1986)

ICNIRP (1996)

Phone Operation

NORMAL POSITION: Hold the phone as you would

any other telephone with the antenna pointed up

and over your shoulder.

* American National Standards Institute; National

Council on Radiation Protection and Measurements;

International Commission on Non-Ionizing Radiation

Protection.

SAFETY

Tips on Efficient Operation

may not be shielded against the RF signals from your

wireless phone.

For your phone to operate most efficiently:

Don’t touch the antenna unnecessarily when the

phone is in use. Contact with the antenna affects call

quality and may cause the phone to operate at a

higher power level than otherwise needed.

Pacemakers

The Health Industry Manufacturers Association

recommends that a minimum separation of six (6)

inches be maintained between a handheld wireless

phone and a pacemaker to avoid potential

interference with the pacemaker. These

recommendations are consistent with the

independent research by and recommendations of

Wireless Technology Research.

Driving

Check the laws and regulations on the use of wireless

phones in the areas where you drive and always obey

them. Also, if using your phone while driving, please

observe the following:

Persons with pacemakers:

Give full attention to driving -- driving safely is

your first responsibility;

Should ALWAYS keep the phone more than six (6)

inches from their pacemaker when the phone is

Use hands-free operation, if available;

turned ON;

Pull off the road and park before making or

Should not carry the phone in a breast pocket;

answering a call if driving conditions or the law

require it.

Should use the ear opposite the pacemaker to

minimize the potential for interference;

Electronic Devices

Should turn the phone OFF immediately if there is

any reason to suspect that interference is taking

place.

Most modern electronic equipment is shielded from

RF signals. However, certain electronic equipment

Hearing Aids

Vehicles

Some digital wireless phones may interfere with some

RF signals may affect improperly installed or

hearing aids. In the event of such interference, you

inadequately shielded electronic systems in motor

may want to consult your service provider (or call the

vehicles. Check with the manufacturer or its

customer service line to discuss alternatives).

representative regarding your vehicle. You should

also consult the manufacturer of any equipment that

has been added to your vehicle.

Other Medical Devices

If you use any other personal medical device, consult

Posted Facilities

the manufacturer of your device to determine if it is

adequately shielded from external RF energy. Your

Turn your phone OFF in any facility where posted

notices so require.

physician may be able to assist you in obtaining this

information.

Aircraft

Health Care Facilities

FCC regulations prohibit using your phone while in

Turn your phone OFF in health care facilities when

the air. Switch OFF your phone before boarding an

any regulations posted in these areas instruct you to

do so. Hospitals or health care facilities may use

aircraft.

Blasting Areas

equipment that could be sensitive to external RF

energy.

To avoid interfering with blasting operations, turn

your phone OFF when in a “blasting area” or in areas

posted: “Turn off two-way radio”. Obey all signs and

instructions.

SAFETY

Potentially Explosive Atmosphere

Safety Information

Turn your phone OFF when in any area with a

potentially explosive atmosphere and obey all signs

and instructions. Sparks in such areas could cause an

explosion or fire resulting in bodily injury or even

death.

Please read and observe the following information for

safe and proper use of your phone and to prevent

damage. Also, keep the user guide in an accessible

place at all times after reading it.

Caution! Violation of the instructions may

cause minor or serious damage to the product.

Areas with a potentially explosive atmosphere are

often, but not always marked clearly. Potential areas

may include: fueling areas (such as gasoline stations);

below deck on boats; fuel or chemical transfer or

storage facilities; vehicles using liquefied petroleum

gas (such as propane or butane); areas where the air

contains chemicals or particles (such as grain, dust,

or metal powders); and any other area where you

would normally be advised to turn off your vehicle

engine.

Charger and Adapter Safety

The charger and adapter are intended for indoor

use only.

Insert the battery pack charger vertically into the

wall power socket.

Use the correct adapter for your phone when

using the battery pack charger abroad.

Only use the approved battery charger. Otherwise,

For Vehicles Equipped with an Air Bag

you may cause serious damage to your phone.

An air bag inflates with great force. DO NOT place

objects, including either installed or portable wireless

equipment, in the area over the air bag or in the air

Battery Information and Care

Please dispose of your battery properly or take it

to your local wireless carrier for recycling.

bag deployment area. If in-vehicle wireless equipment

is improperly installed and the air bag inflates, serious

injury could result.

The battery doesn't need to be empty before

recharging.

Use only LG-approved chargers specific to your

phone model since they are designed to maximize

battery life.

Unplug the power cord prior to cleaning your

phone, and clean the power plug pin when it’s dirty.

When using the power plug, ensure that it’s firmly

connected. If not, it may cause excessive heat or fire.

Do not disassemble or short-circuit the battery.

Keep the battery’s metal contacts clean.

If you put your phone in a pocket or bag without

covering the receptacle of the phone (power plug

pin), metallic articles (such as a coin, paperclip or

pen) may short-circuit the phone. Always cover the

receptacle when not in use.

Replace the battery when it no longer provides

acceptable performance. The battery can be

recharged several hundred times before replacement.

Recharge the battery after long periods of non-use

Don’t short-circuit the battery. Metallic articles

such as a coin, paperclip or pen in your pocket or

bag may short-circuit the + and – terminals of the

battery (metal strips on the battery) upon moving.

Short-circuit of the terminal may damage the

battery and cause an explosion.

to maximize battery life.

Battery life will vary due to usage patterns and

environmental conditions.

Use of extended backlighting, Browser, and data

connectivity kits affect battery life and

talk/standby times.

Do not disassemble or crush the battery. It may

cause a fire.

The self-protection function of the battery cuts the

power of the phone when its operation is in an

abnormal state. In this case, remove the battery

from the phone, reinstall it, and turn the phone on.

General Notice

Using a damaged battery or placing a battery in

Explosion, Shock, and Fire Hazards

your mouth may cause serious injury.

Do not place items containing magnetic

Do not put your phone in a place subject to

components such as a credit card, phone card,

bank book, or subway ticket near your phone. The

excessive dust and keep the minimum required

distance between the power cord and heat sources.

SAFETY

magnetism of the phone may damage the data

messages, voice messages, pictures, and videos

stored in the magnetic strip.

could also be deleted.) The manufacturer is not

liable for damage due to the loss of data.

Talking on your phone for a long period of time

may reduce call quality due to heat generated

during use.

When you use the phone in public places, set the

ringtone to vibration so you don't disturb others.

When the phone is not used for a long period

Do not turn your phone on or off when putting it

to your ear.

time, store it in a safe place with the power cord

unplugged.

Use accessories, such as earphones and headsets,

Using the phone in proximity to receiving

with caution. Ensure that cables are tucked away

safely and do not touch the antenna unnecessarily.

equipment (i.e., TV or radio) may cause

interference to the phone.

Warning! Important safety information

Do not use the phone if the antenna is damaged.

If a damaged antenna contacts skin, it may cause a

slight burn. Please contact an LG Authorized

Service Center to replace the damaged antenna.

Avoiding hearing damage Permanent hearing loss

may occur if you use your headset at a high volume.

Set the volume to a safe level. You can adapt over

time to a higher volume of sound that may sound

normal but can be damaging to your hearing. If you

experience ringing in your ears or muffled speech,

Do not immerse your phone in water. If this

happens, turn it off immediately and remove the

battery. If the phone does not work, take it to an

LG Authorized Service Center.

stop listening and have your hearing checked. The

louder the volume, the less time is required before

your hearing could be affected. Hearing experts

suggest that to protect your hearing:

Do not paint your phone.

The data saved in your phone might be deleted

due to careless use, repair of the phone, or

upgrade of the software. Please backup your

Limit the amount of time you use headset at high

volume.

important phone numbers. (Ring tones, text

Avoid turning up the volume to block out noisy

surroundings.

Limit the amount of time you use your phone

and/or headset at high volume.

Turn the volume down if you can’t hear people

speaking near you.

Avoid turning up the volume to block out noisy

surroundings.

Turn the volume down if you can’t hear people

speaking near you.

For information about how to set a maximum volume

limit on your handset, please refer to the features

guide for your handset.

For information about how to set a maximum volume

limit on your phone, see the features guide for your

phone.

Using headsets safely Use of headsets to listen to

music while operating a vehicle is not recommended

and is illegal in some areas. Be careful and attentive

while driving. Stop using this device if you find it

disruptive or distracting while operating any type of

vehicle or performing any other activity that requires

your full attention.

Using your phone safely Use of your phone while

operating a vehicle is not recommended and is illegal

in some areas. Be careful and attentive while driving.

Stop using your phone if you find it disruptive or

distracting while operating any type of vehicle or

performing any other activity that requires your full

attention.

Avoiding hearing damage Permanent hearing loss

may occur if you use your phone and/or headset at a

high volume. Set the volume to a safe level. You can

adapt over time to a higher volume of sound that may

sound normal but can be damaging to your hearing. If

you experience ringing in your ears or muffled speech,

stop listening and have your hearing checked. The

louder the volume, the less time is required before

your hearing could be affected. Hearing experts

suggest that to protect your hearing:

SAFETY

2. What is the FDA's role concerning the safety of

wireless phones?

FDA Consumer Update

The U.S. Food and Drug Administration’s Center for

Devices and Radiological Health Consumer Update

on Mobile Phones:

Under the law, the FDA does not review the safety of

radiation-emitting consumer products such as

wireless phones before they can be sold, as it does

with new drugs or medical devices. However, the

agency has authority to take action if wireless phones

are shown to emit Radio Frequency (RF) energy at a

level that is hazardous to the user. In such a case, the

FDA could require the manufacturers of wireless

phones to notify users of the health hazard and to

repair, replace, or recall the phones so that the

hazard no longer exists.

1. Do wireless phones pose a health hazard?

The available scientific evidence does not show that

any health problems are associated with using

wireless phones. There is no proof, however, that

wireless phones are absolutely safe. Wireless phones

emit low levels of Radio Frequency (RF) energy in the

microwave range while being used. They also emit

very low levels of RF when in standby mode. Whereas

high levels of RF can produce health effects (by

heating tissue), exposure to low level RF that does

not produce heating effects causes no known adverse

health effects. Many studies of low level RF exposures

have not found any biological effects. Some studies

have suggested that some biological effects may

occur, but such findings have not been confirmed by

additional research. In some cases, other researchers

have had difficulty in reproducing those studies, or in

determining the reasons for inconsistent results.

Although the existing scientific data do not justify

FDA regulatory actions, the FDA has urged the

wireless phone industry to take a number of steps,

including the following:

Support needed research into possible biological

RF exposure to the user that is not necessary for

device function; and

effects of RF of the type emitted by wireless

phones;

Design wireless phones in a way that minimizes any

Cooperate in providing users of wireless phones

with the best possible information on possible

effects of wireless phone use on human health.

questions about wireless phones.

The FCC also regulates the base stations that the

wireless phone networks rely upon. While these base

The FDA belongs to an interagency working group of

stations operate at higher power than do the wireless

the federal agencies that have responsibility for

phones themselves, the RF exposures that people get

different aspects of RF safety to ensure coordinated

from these base stations are typically thousands of

efforts at the federal level. The following agencies

belong to this working group:

times lower than those they can get from wireless

phones. Base stations are thus not the subject of the

safety questions discussed in this document.

National Institute for Occupational Safety and

Health

3. What kinds of phones are the subject of this

update?

Environmental Protection Agency

The term “wireless phone” refers here to handheld

wireless phones with built-in antennas, often called

“cell”, “mobile”, or “PCS” phones. These types of

Occupational Safety and Health Administration

National Telecommunications and Information

Administration

wireless phones can expose the user to measurable

Radio Frequency (RF) energy because of the short

distance between the phone and the user’s head.

The National Institutes of Health participates in

some interagency working group activities, as well.

These RF exposures are limited by FCC safety

guidelines that were developed with the advice of the

FDA and other federal health and safety agencies.

When the phone is located at greater distances from

the user, the exposure to RF is drastically lower

because a person's RF exposure decreases rapidly

The FDA shares regulatory responsibilities for wireless

phones with the Federal Communications

Commission (FCC). All phones that are sold in the

United States must comply with FCC safety

guidelines that limit RF exposure. The FCC relies on

the FDA and other health agencies for safety

SAFETY

with increasing distance from the source. The so-

conditions under which people use wireless phones,

called “cordless phones,” which have a base unit

so we do not know with certainty what the results of

connected to the telephone wiring in a house,

such studies mean for human health. Three large

typically operate at far lower power levels, and thus

epidemiology studies have been published since

produce RF exposures far below the FCC safety

December 2000. Between them, the studies

limits.

investigated any possible association between the

use of wireless phones and primary brain cancer,

glioma, meningioma, or acoustic neuroma, tumors of

the brain or salivary gland, leukemia, or other

cancers. None of the studies demonstrated the

existence of any harmful health effects from wireless

phone RF exposures. However, none of the studies

can answer questions about long-term exposures,

since the average period of phone use in these

studies was around three years.

4. What are the results of the research done

already?

The research done thus far has produced conflicting

results, and many studies have suffered from flaws in

their research methods. Animal experiments

investigating the effects of Radio Frequency (RF)

energy exposures characteristic of wireless phones

have yielded conflicting results that often cannot be

repeated in other laboratories. A few animal studies,

however, have suggested that low levels of RF could

5. What research is needed to decide whether RF

exposure from wireless phones poses a health risk?

accelerate the development of cancer in laboratory

animals. However, many of the studies that showed

A combination of laboratory studies and

increased tumor development used animals that had

epidemiological studies of people actually using

been genetically engineered or treated with cancer-

wireless phones would provide some of the data that

causing chemicals so as to be pre-disposed to

are needed. Lifetime animal exposure studies could

develop cancer in the absence of RF exposure. Other

be completed in a few years. However, very large

studies exposed the animals to RF for up to 22 hours

per day. These conditions are not similar to the

numbers of animals would be needed to provide

reliable proof of a cancer promoting effect if one

exists. Epidemiological studies can provide data that

development of a detailed agenda of research needs

is directly applicable to human populations, but ten

that has driven the establishment of new research

or more years follow-up may be needed to provide

programs around the world. The project has also

answers about some health effects, such as cancer.

helped develop a series of public information

documents on EMF issues.

This is because the interval between the time of

exposure to a cancer-causing agent and the time

tumors develop — if they do — may be many, many

years. The interpretation of epidemiological studies is

hampered by difficulties in measuring actual RF

exposure during day-to-day use of wireless phones.

Many factors affect this measurement, such as the

angle at which the phone is held, or which model of

phone is used.

The FDA and the Cellular Telecommunications &

Internet Association (CTIA) have a formal

Cooperative Research And Development Agreement

(CRADA) to do research on wireless phone safety.

The FDA provides the scientific oversight, obtaining

input from experts in government, industry, and

academic organizations. CTIA-funded research is

conducted through contracts with independent

investigators. The initial research will include both

laboratory studies and studies of wireless phone

users. The CRADA will also include a broad

assessment of additional research needs in the

context of the latest research developments around

the world.

6. What is the FDA doing to find out more about

the possible health effects of wireless phone RF?

The FDA is working with the U.S. National Toxicology

Program and with groups of investigators around the

world to ensure that high priority animal studies are

conducted to address important questions about the

effects of exposure to Radio Frequency (RF) energy.

The FDA has been a leading participant in the World

Health Organization International Electro Magnetic

Fields (EMF) Project since its inception in 1996. An

influential result of this work has been the

SAFETY

7. How can I find out how much Radio Frequency

energy exposure I can get by using my wireless

phone?

8. What has the FDA done to measure the Radio

Frequency energy coming from wireless phones?

The Institute of Electrical and Electronic Engineers

(IEEE) is developing a technical standard for

All phones sold in the United States must comply with

measuring the Radio Frequency (RF) energy exposure

from wireless phones and other wireless handsets

Federal Communications Commission (FCC)

guidelines that limit Radio Frequency (RF) energy

exposures. The FCC established these guidelines in

with the participation and leadership of FDA

consultation with the FDA and the other federal

scientists and engineers. The standard,

health and safety agencies. The FCC limit for RF

exposure from wireless phones is set at a Specific

Absorption Rate (SAR) of 1.6 watts per kilogram (1.6

W/kg). The FCC limit is consistent with the safety

standards developed by the Institute of Electrical and

Electronic Engineering (IEEE) and the National

Council on Radiation Protection and Measurement.

The exposure limit takes into consideration the body’s

ability to remove heat from the tissues that absorb

energy from the wireless phone and is set well below

levels known to have effects. Manufacturers of wireless

phones must report the RF exposure level for each

model of phone to the FCC. The FCC website

“Recommended Practice for Determining the Spatial-

Peak Specific Absorption Rate (SAR) in the Human

Body Due to Wireless Communications Devices:

Experimental Techniques”, sets forth the first

consistent test methodology for measuring the rate

at which RF is deposited in the heads of wireless

phone users. The test method uses a tissue-

simulating model of the human head. Standardized

SAR test methodology is expected to greatly improve

the consistency of measurements made at different

laboratories on the same phone. SAR is the

measurement of the amount of energy absorbed in

tissue, either by the whole body or a small part of

the body. It is measured in watts/kg (or milliwatts/g)

of matter. This measurement is used to determine

whether a wireless phone complies with safety

guidelines.

(

http://www.fcc.gov/oet/rfsafety) gives directions for

locating the FCC identification number on your phone

so you can find your phone’s RF exposure level in the

online listing.

9. What steps can I take to reduce my exposure to

Radio Frequency energy from my wireless phone?

10. What about children using wireless phones?

The scientific evidence does not show a danger to

users of wireless phones, including children and

teenagers. If you want to take steps to lower

exposure to Radio Frequency (RF) energy, the

measures described above would apply to children

and teenagers using wireless phones. Reducing the

time of wireless phone use and increasing the

distance between the user and the RF source will

reduce RF exposure.

If there is a risk from these products — and at this

point we do not know that there is — it is probably

very small. But if you are concerned about avoiding

even potential risks, you can take a few simple steps

to minimize your exposure to Radio Frequency (RF)

energy. Since time is a key factor in how much

exposure a person receives, reducing the amount of

time spent using a wireless phone will reduce RF

exposure. If you must conduct extended

Some groups sponsored by other national

conversations by wireless phone every day, you could

place more distance between your body and the

source of the RF, since the exposure level drops off

dramatically with distance. For example, you could

use a headset and carry the wireless phone away

from your body or use a wireless phone connected to

a remote antenna. Again, the scientific data do not

demonstrate that wireless phones are harmful. But if

you are concerned about the RF exposure from these

products, you can use measures like those described

governments have advised that children be

discouraged from using wireless phones at all. For

example, the government in the United Kingdom

distributed leaflets containing such a

recommendation in December 2000. They noted

that no evidence exists that using a wireless phone

causes brain tumors or other ill effects. Their

recommendation to limit wireless phone use by

children was strictly precautionary; it was not based

on scientific evidence that any health hazard exists.

above to reduce your RF exposure from wireless

phone use.

SAFETY

11. What about wireless phone interference with

medical equipment?

at the same time. This standard was approved by the

IEEE in 2000.

The FDA continues to monitor the use of wireless

phones for possible interactions with other medical

devices. Should harmful interference be found to

occur, the FDA will conduct testing to assess the

interference and work to resolve the problem.

Radio Frequency (RF) energy from wireless phones

can interact with some electronic devices. For this

reason, the FDA helped develop a detailed test

method to measure Electro Magnetic Interference

(EMI) of implanted cardiac pacemakers and

defibrillators from wireless telephones. This test

method is now part of a standard sponsored by the

Association for the Advancement of Medical

Instrumentation (AAMI). The final draft, a joint effort

by the FDA, medical device manufacturers, and many

other groups, was completed in late 2000. This

standard will allow manufacturers to ensure that

cardiac pacemakers and defibrillators are safe from

wireless phone EMI.

12. Where can I find additional information?

For additional information, please refer to the

following resources:

FDA web page on wireless phones

(http://www.fda.gov/cellphones/)

Federal Communications Commission (FCC) RF

Safety Program

(http://www.fcc.gov/oet/rfsafety)

International Commission on Non-lonizing Radiation

Protection

The FDA has tested hearing aids for interference from

handheld wireless phones and helped develop a

(http://www.icnirp.de)

voluntary standard sponsored by the Institute of

Electrical and Electronic Engineers (IEEE). This

standard specifies test methods and performance

requirements for hearing aids and wireless phones so

that no interference occurs when a person uses a

“compatible” phone and a “compatible” hearing aid

World Health Organization (WHO) International EMF

Project

(http://www.who.int/emf)

National Radiological Protection Board (UK)

(http://www.hpa.org.uk/radiation/)

3. Make sure you place your wireless phone within

easy reach and where you can reach it without

removing your eyes from the road. If you get an

incoming call at an inconvenient time, if possible,

let your voicemail answer it for you.

10 Driver Safety Tips

Your wireless phone gives you the powerful ability to

communicate by voice almost anywhere, anytime. An

important responsibility accompanies the benefits of

wireless phones, one that every user must uphold.

4. Suspend conversations during hazardous driving

conditions or situations. Let the person you are

speaking with know you are driving; if necessary,

When operating a car, driving is your first

responsibility. When using your wireless phone

behind the wheel of a car, practice good common

sense and remember the following tips:

suspend the call in heavy traffic or hazardous

weather conditions. Rain, sleet, snow, and ice can

be hazardous, but so is heavy traffic. As a driver,

your first responsibility is to pay attention to the

road.

1. Get to know your wireless phone and its features

such as speed dial and redial. Carefully read your

instruction manual and learn to take advantage of

valuable features most phones offer, including

automatic redial and memory. Also, work to

memorize the phone keypad so you can use the

speed dial function without taking your attention

off the road.

5. Don’t take notes or look up phone numbers while

driving. If you are reading an address book or

business card, or writing a “to-do” list while driving

a car, you are not watching where you are going. It

is common sense. Do not get caught in a

dangerous situation because you are reading or

writing and not paying attention to the road or

nearby vehicles.

2. When available, use a hands-free device. A number

of hands-free wireless phone accessories are

readily available today. Whether you choose an

installed mounted device for your wireless phone

or a speaker phone accessory, take advantage of

these devices if available to you.

SAFETY

6. Dial sensibly and assess the traffic; if possible,

Remember, it’s a free call on your wireless phone!

place calls when you are not moving or before

pulling into traffic. Try to plan your calls before

you begin your trip or attempt to coincide your

calls with times you may be stopped at a stop

sign, red light, or otherwise stationary. But if you

need to dial while driving, follow this simple tip --

dial only a few numbers, check the road and your

mirrors, then continue.

9. Use your wireless phone to help others in

emergencies. Your wireless phone provides you a

perfect opportunity to be a “Good Samaritan” in

your community. If you see an auto accident, crime

in progress or other serious emergency where lives

are in danger, call 911 or other local emergency

number, as you would want others to do for you.

10. Call roadside assistance or a special wireless non-

emergency assistance number when necessary.

Certain situations you encounter while driving

may require attention, but are not urgent enough

to merit a call for emergency services. But you

can still use your wireless phone to lend a hand.

If you see a broken-down vehicle posing no

serious hazard, a broken traffic signal, a minor

7. Do not engage in stressful or emotional

conversations that may be distracting. Stressful or

emotional conversations and driving do not mix;

they are distracting and even dangerous when you

are behind the wheel of a car. Make people you

are talking with aware you are driving and if

necessary, suspend conversations which have the

potential to divert your attention from the road.

traffic accident where no one appears injured or a

8. Use your wireless phone to call for help. Your

vehicle you know to be stolen, call roadside

wireless phone is one of the greatest tools you can

assistance or other special non-emergency

wireless number.

own to protect yourself and your family in

dangerous situations -- with your phone at your

side, help is only three numbers away. Dial 911 or

other local emergency number in the case of fire,

traffic accident, road hazard, or medical emergency.

The above tips are meant as general guidelines.

Before deciding to use your mobile device while

operating a vehicle, it is recommended that you

consult your applicable jurisdiction’s local laws or

other regulations regarding such use. Such laws or

Consumer Information on SAR

(Specific Absorption Rate)

other regulations may prohibit or otherwise restrict

the manner in which a driver may use his or her

phone while operating a vehicle.

This model phone meets the government's

requirements for exposure to radio waves. Your

wireless phone is a radio transmitter and receiver. It is

designed and manufactured not to exceed the

emission limits for exposure to Radio Frequency (RF)

energy set by the Federal Communications

Commission of the U.S. Government. These limits are

part of comprehensive guidelines and establish

permitted levels of RF energy for the general

population. The guidelines are based on standards

that were developed by independent scientific

organizations through periodic and thorough

evaluation of scientific studies. The standards include

a substantial safety margin designed to assure the

safety of all persons, regardless of age and health.

The exposure standard for wireless mobile phones

employs a unit of measurement known as the Specific

Absorption Rate, or SAR. The SAR limit set by the

FCC is 1.6 W/kg. Tests for SAR are conducted using

standard operating positions specified by the FCC

with the phone transmitting at its highest certified

power level in all tested frequency bands. Although

SAFETY

SAR is determined at the highest certified power

The FCC has granted an Equipment Authorization for

level, the actual SAR level of the phone while

this model phone with all reported SAR levels

operating can be well below the maximum value.

evaluated as in compliance with the FCC RF emission

Because the phone is designed to operate at multiple

guidelines. SAR information on this model phone is

power levels to use only the power required to reach

on file with the FCC and can be found under the

the network, in general, the closer you are to a

Display Grant section of

wireless base station antenna, the lower the power

output.

http://www.fcc.gov/oet/fccid after searching on FCC

ID BEJVX5300. Additional information on Specific

Absorption Rates (SAR) can be found on the Cellular

Telecommunications Industry Association (CTIA)

website at http://www.ctia.org/

Before a phone model is available for sale to the

public, it must be tested and certified to the FCC

that it does not exceed the limit established by the

government-adopted requirement for safe exposure.

In the United States and Canada, the SAR limit for

The tests are performed in positions and locations

mobile phones used by the public is 1.6 watts/kg

(e.g., at the ear and worn on the body) as required

by the FCC for each model.

(W/kg) averaged over one gram of tissue. The

standard incorporates a substantial margin of safety

to give additional protection for the public and to

account for any variations in measurements.

The highest SAR value for this model phone when

tested for use at the ear is 1.27 W/kg and when

worn on the body, as described in this user guide, is

0.731W/kg (body-worn measurements differ among

phone models, depending upon available accessories

and FCC requirements). While there may be

differences between SAR levels of various phones and

at various positions, they all meet the government

requirement for safe exposure.

The ratings are not guarantees. Results will vary

depending on the user's hearing device and hearing

loss. If your hearing device happens to be vulnerable

to interference, you may not be able to use a rated

phone successfully. Trying out the phone with your

hearing device is the best way to evaluate it for your

personal needs.

FCC Hearing-Aid Compatibility (HAC)

Regulations for Wireless Devices

On July 10, 2003, the U.S. Federal Communications

Commission (FCC) Report and Order in WT Docket

01-309 modified the exception of wireless phones

under the Hearing Aid Compatibility Act of 1988

(HAC Act) to require digital wireless phones be

compatible with hearing-aids. The intent of the HAC

Act is to ensure reasonable access to

M-Ratings: Phones rated M3 or M4 meet FCC

requirements and are likely to generate less

interference to hearing devices than phones that are

not labeled. M4 is the better/higher of the two

ratings.

telecommunications services for persons with hearing

disabilities.

While some wireless phones are used near some

hearing devices (hearing aids and cochlear implants),

users may detect a buzzing, humming, or whining

noise. Some hearing devices are more immune than

others to this interference noise, and phones also

vary in the amount of interference they generate.

Hearing devices may also be rated. Your hearing

device manufacturer or hearing health professional

may help you find this rating. Higher ratings mean

that the hearing device is relatively immune to

interference noise. The hearing aid and wireless

phone rating values are then added together. A sum

of 5 is considered acceptable for normal use. A sum

of 6 is considered for best use.

The wireless telephone industry has developed a

rating system for wireless phones, to assist hearing

device users to find phones that may be compatible

with their hearing devices. Not all phones have been

rated. Phones that are rated have the rating on their

box or a label located on the box.

SAFETY

Standards Institute (ANSI) C63.19 standard.

When you're talking over the cell phone, it's

recommended you'd turn the Bluetooth mode off for

HAC.

For information about hearing aids and digital

wireless phones

In the above example, if a hearing aid meets the M2

level rating and the wireless phone meets the M3

level rating, the sum of the two values equal M5. This

should provide the hearing aid user with “normal

FCC Hearing Aid Compatibility and Volume

Control

http://www.fcc.gov/cgb/dro/hearing.html

usage” while using their hearing aid with the

particular wireless phone. “Normal usage” in this

context is defined as a signal quality that is

acceptable for normal operation.

Gallaudet University, RERC

http://tap.gallaudet.edu/DigWireless.KS/DigWireless.htm

The M mark is intended to be synonymous with the

U mark. The T mark is intended to be synonymous

HLAA (Hearing Loss Association of America)

http://www.hearingloss.org/learn/cellphonetech.asp

with the UT mark. The M and T marks are

recommended by the Alliance for

The Hearing Aid Compatibility FCC Order

Telecommunications Industries Solutions (ATIS). The

U and UT marks are referenced in Section 20.19 of

http://hraunfoss.fcc.gov/edocs_public/attachmatc

h/FCC-03-168A1.pdf

the FCC Rules. The HAC rating and measurement

procedure are described in the American National

ACCESSORIES

There are a variety of accessories available for your mobile phone. Consult your local dealer for availability.

Optional items are sold separately.

Battery Charger

Battery Pack Charger

The battery charger allows you to

The battery pack charger allows you to

charge your phone.

charge the battery pack itself without

the phone.

Battery

Standard battery is available.

Vehicle Power Charger

The vehicle power charger allows you

to operate the phone and trickle charge

the phone’s battery from your vehicle.

LIMITED WARRANTY STATEMENT

1. WHAT THIS WARRANTY COVERS:

(4) The external housing and cosmetic parts shall be

free of defects at the time of shipment and,

therefore, shall not be covered under these

limited warranty terms.

LG offers you a limited warranty that the enclosed

subscriber unit and its enclosed accessories will be

free from defects in material and workmanship,

according to the following terms and conditions:

(5) Upon request from LG, the consumer must

provide information to reasonably prove the date

of purchase.

(1) The limited warranty for the product extends for

TWELVE (12) MONTHS beginning on the date

of purchase of the product with valid proof of

purchase, or absent valid proof of purchase,

FIFTEEN (15) MONTHS from date of

manufacture as determined by the unit’s

manufacture date code.

(6) The customer shall bear the cost of shipping the

product to the Customer Service Department of

LG. LG shall bear the cost of shipping the

product back to the consumer after the

completion of service under this limited warranty.

(2) The limited warranty extends only to the original

purchaser of the product and is not assignable

or transferable to any subsequent purchaser/end

user.

(3) This warranty is good only to the original

purchaser of the product during the warranty

period as long as it is in the U.S, including

Alaska, Hawaii, U.S. Territories and Canada.

2. WHAT THIS WARRANTY DOES NOT COVER:

(6) This limited warranty is in lieu of all other

warranties, express or implied either in fact or by

operations of law, statutory or otherwise,

(1) Defects or damages resulting from use of the

product in other than its normal and customary

manner.

including, but not limited to any implied warranty

of marketability or fitness for a particular use.

(2) Defects or damages from abnormal use,

abnormal conditions, improper storage,

(7) Damage resulting from use of non-LG approved

accessories.

exposure to moisture or dampness,

unauthorized modifications, unauthorized

connections, unauthorized repair, misuse,

neglect, abuse, accident, alteration, improper

installation, or other acts which are not the fault

of LG, including damage caused by shipping,

blown fuses, spills of food or liquid.

(8) All plastic surfaces and all other externally

exposed parts that are scratched or damaged

due to normal customer use.

(9) Products operated outside published maximum

ratings.

(10)Products used or obtained in a rental program.

(3) Breakage or damage to antennas unless caused

directly by defects in material or workmanship.

(11)Consumables (such as fuses).

(4) That the Customer Service Department at LG

was not notified by consumer of the alleged

defect or malfunction of the product during the

applicable limited warranty period.

(5) Products which have had the serial number

removed or made illegible.

LIMITED WARRANTY STATEMENT

3. STATE LAW RIGHTS:

4. HOW TO GET WARRANTY SERVICE:

No other express warranty is applicable to this

To obtain warranty service, please call or fax to the

product. THE DURATION OF ANY IMPLIED

following telephone numbers from anywhere in the

continental United States:

WARRANTIES, INCLUDING THE IMPLIED

WARRANTY OF MARKETABILITY, IS LIMITED TO

THE DURATION OF THE EXPRESS WARRANTY

HEREIN. LGE MOBILECOMM USA INC. SHALL NOT

Tel. 1-800-793-8896 or Fax. 1-800-448-4026

Or visit http://us.lgservice.com. Correspondence may

also be mailed to:

BE LIABLE FOR THE LOSS OF THE USE OF THE

PRODUCT, INCONVENIENCE, LOSS OR ANY

OTHER DAMAGES, DIRECT OR CONSEQUENTIAL,

LG Electronics Service- Mobile Handsets

P.O. Box 240007, Huntsville, AL 35824

ARISING OUT OF THE USE OF, OR INABILITY TO

USE, THIS PRODUCT OR FOR ANY BREACH OF

ANY EXPRESS OR IMPLIED WARRANTY,

DO NOT RETURN YOUR PRODUCT TO THE

ABOVE ADDRESS. Please call or write for the

location of the LG authorized service center nearest

INCLUDING THE IMPLIED WARRANTY OF

MARKETABILITY APPLICABLE TO THIS PRODUCT.

you and for the procedures for obtaining warranty

claims.

Some states do not allow the exclusive limitation of

incidental or consequential damages or limitations on

how long an implied warranty lasts; so these

limitations or exclusions may not apply to you. This

warranty gives you specific legal rights and you may

also have other rights which vary from state to state.

INDEX

123 (Numbers) Mode 22 Battery Charge Level

Battery Charger

17 Changing Letter Case 23

95 Charger Port

Earphone Jack

Battery Pack Charger 95 Charging the Battery

Earpiece

Bluetooth Info

Bluetooth Name

Bluetooth®

73 Clear

Edit Voicemail #

Abc (Multi-tap) Mode 22

73 Clocks

Editing Contacts

Entries

Airplane Mode

Alarm Clock

Alert Type

All Calls

72 Color Schemes

Bodily Contact During

Contact List

Emergency #s

END/PWR Key

Operation

Contacts

Contacts in Your Phone’s

Entering and Editing

Alphanumeric Keypad 13

Memory

Information

Answer Options

Audio

Correcting Dialing Mistakes

Entry Mode

Ez Tip Calc

Calculator

Calendar

Auto Delete

Auto NAM

Auto Retry

Auto Save

Call Connect

Call Settings

Call Timer

Call Waiting

Caller ID

Data

FCC Part 15 Class B

Data Counter

Delete All

Deleting

Dial fonts

Dialed

Compliance

Auto Volume

FCC RF Exposure

Information

Camera Key

Camera Lens

Flash

Flip

BACK Key

Backlight

Banner

Caps Lock (T9WORD/

ABC)

23 Display

12 Drafts

Caution

Change Lock Code

Getting Started with Your

Battery

16, 95

IN_PD_honE_eX

16 Lock Phone

Groups

53 Lower Case

(T9word/ abc)

Navigation Key

13 Quick Access to

Convenient Features

Quick-Text

Network

New Contact

New Picture Message 38

Image

Making Calls

Manner Mode Key

Memory

New Text Message

Important Information

IMPORTANT SAFETY

PRECAUTIONS

Received

Notepad

Receiving Calls

Recent Calls

Record Voice

Redialing Calls

Inbox

40 Menu Access

Menu Style

Initial Cap

(T9Word/ Abc)

Menus Overview

Message Alerts

Messaging

One-Touch Dial

Installing the Battery

Removing the Battery 16

Outside Display

Reset Default

Restrict Calls

Right Soft Key

Ringers

Microphone

Minute Beep

Missed

Key Functions

Paired Devices

Phone Info.

Multimedia

Mute Function

My Media

Phone Overview

Languages

Picture-Auto Receive 43

LCD Screen

Screen Icons

Power

My Menu

Left Soft Key

Location

13, 22

Security

Power On/Off Tones 63

My Name Card

My Visibility

Sent

Lock Mode

Service Alerts

Serving System

Lock Mode Key

100

Set NAM

70 Tools

58 Welcome

Settings

43, 62 TTY Mode

69 World Clock

Shift

22 Turning the Phone On and

Off

Side Keys

Signal Strength

Sound

Space

Unit Converter

Speed Dialing

Using Phone Menus

Speed Dials

Symbols Mode

System

Vehicle Power Charger 95

System Select

Vehicle-Mounted External

Antenna

Vibrate mode

Voice Command

Voice Command Key

Voice Privacy

Voicemail

T9Word (T9) Mode

Table of Contents

Take Picture

Technical Details

Text Input

Volume

Text Input Examples

Volume Quick

Text Input Modes

22 Adjustment

Text Signature

Text-Auto Play

Text-Auto View

Text-Callback #

Wallpaper

101

Motorola StarTAC ST7762 User Manual
Motorola MOTOSLVR L7c User Manual
Krell Industries KPS 25s User Manual
Jura Capresso IMPRESSA Z5 User Manual
Ericsson T18d User Manual
Elta 4259 User Manual
Casio DQR 100 User Manual
American Audio DCD PRO610 User Manual
Aiwa NSX A508 User Manual
ABB TPS44 F33 User Manual