Ericsson T18d User Manual

Table of Contents

Setting the Display Language . . . . . . . . . . . . . . . . . . . . . 22

Setting the Ring Sound . . . . . . . . . . . . . . . . . . . . . . . . . 22

Setting the Ring Volume . . . . . . . . . . . . . . . . . . . . . . . . 23

Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

International Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Caller Number Identification . . . . . . . . . . . . . . . . . . . . . 27

Low Battery Power Alert . . . . . . . . . . . . . . . . . . . . . . . . 27

Security Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Document Conventions . . . . . . . . . . . . . . . . 1

Guidelines for Safe and Efficient Use . . . . . 3

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Product Care and Operation . . . . . . . . . . . . . . . . . . . . . . .6

Battery Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Getting Started. . . . . . . . . . . . . . . . . . . . . . . . 9

Attaching Your Standard or Swivel Belt Clip . . . . . . . . . . .9

Connecting and Removing Your Battery . . . . . . . . . . . . .10

Charging Your Battery . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Selecting Your Charger . . . . . . . . . . . . . . . . . . . . . . . . . .11

Using Menus . . . . . . . . . . . . . . . . . . . . . . . . 29

Opening Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Opening Submenus . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Changing Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Exiting the Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Quick Menu Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Menu Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Learning About Your Mobile Phone. . . . . . 15

Highlights of Your Mobile Phone . . . . . . . . . . . . . . . . . .15

The Parts of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . .16

Phone Display Icons and Display Indicators . . . . . . . . . .17

Key Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Display Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Menu Descriptions . . . . . . . . . . . . . . . . . . . 31

Accessing Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Phone Lists Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Basic Operations . . . . . . . . . . . . . . . . . . . . . 21

Summary of Basic Operations . . . . . . . . . . . . . . . . . . . . .21

Turning Your Phone On and Off . . . . . . . . . . . . . . . . . .22

Messages Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Call Manager Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Sounds Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Profiles Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Manual Installation of Your Modem Driver or Voice

Call Dialer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Problems You Can Solve . . . . . . . . . . . . . . 67

Displayed Messages and Explanations . . . . . . . . . . . . . . . 67

Problems and Possible Solutions . . . . . . . . . . . . . . . . . . . 67

Using the Phonebook . . . . . . . . . . . . . . . . . 45

Storing a Phone Number and Name . . . . . . . . . . . . . . . . 45

Recalling a Phone Number or Name . . . . . . . . . . . . . . . 47

Editing a Phone Number . . . . . . . . . . . . . . . . . . . . . . . . 48

Erasing a Phone Number . . . . . . . . . . . . . . . . . . . . . . . . 48

Phone Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Message Services . . . . . . . . . . . . . . . . . . . . 51

Text Message Service . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Text Message Memory . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Data, Fax, and Internet Calls. . . . . . . . . . . . 57

Differences Between Data, Fax, and Internet Calls . . . . . 57

Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Setting Up Your Computer . . . . . . . . . . . . . . . . . . . . . . 58

Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Achieving Best Performance . . . . . . . . . . . . . . . . . . . . . . 61

Installing Your Modem Driver From Your Compact

Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Document Conventions

• Menu names are shown in the following

• When this guide instructs you to press a key, press

typeface: MENUS.

and release the key.

• Submenu names are shown in the following type-

• When this guide instructs you to press and hold a

face: Submenu Names.

key, press and hold the key for one to two seconds.

• Keys names are shown in the following typeface:

• Press the down arrow when you see this symbol

CLR.

(

• Text that is seen in the phone’s display is shown in

• Press the up arrow when you see this symbol ( ).

the following typeface: di spl ays.

• Your phone is at the Standby screen when it is

powered On and a call is not in progress.

The quick access shortcuts to your

phone menu and settings are identified

using the hourglass symbol.

Document Conventions

Guidelines for Safe and Efficient Use

The mobile phone is one of the most exciting and inno-

vative products ever developed. Your phone can help you

to stay in touch with your office, your home, emergency

services and others.

industry reviewed the available body of research to

develop the ANSI Standard (C95.1).

The design of your phone complies with the FCC guide-

lines (and those standards).

* American National Standards Institute: National Coun-

cil on Radiation Protection and Measurements; Interna-

tional Commission on Non-Ionizing Radiation Protection.

Safety

Exposure to Radio Frequency Signals

Antenna Care

Your wireless handheld portable telephone is a low

power radio transmitter and receiver. When it is ON, it

receives and also sends out radio frequency (RF) signals.

Use only the supplied or an approved replacement

antenna. Unauthorized antennas, modifications, or

attachments could damage the phone and may violate

FCC regulations.

In August, 1996, the Federal Communications Com-

mission (FCC) adopted RF exposure guidelines with

safety levels for handheld wireless phones. Those guide-

lines are consistent with the safety standards previously

set by both US and international standards bodies:

Phone Operation

NORMAL POSITION: Hold the phone as you would

any other telephone with the antenna pointed up and

over your shoulder.

• ANSI C95.1 (1992)*

• NCRP Report 86 (1986)*

• ICNIRP (1996)*

TIPS ON EFFICIENT OPERATION: For your phone

to operate most efficiently:

• Extend your antenna fully (where applicable).

Those standards were based on comprehensive and peri-

odic evaluations of the relevant scientific literature. For

example, over 120 scientists, engineers, and physicians

from universities, government health agencies, and

• Do not touch the antenna unnecessarily when the

phone is in use. Contact with the antenna affects

call quality and may cause the phone to operate at a

higher power level than otherwise needed.

Guidelines for Safe and Efficient Use

• Call roadside assistance or a special wireless non-

emergency assistance number when necessary.

Driving

Check the laws and regulations on the use of wireless

telephones in the areas where you drive. Always obey

them. Also, if using your phone while driving, please:

Electronic Devices

Most modern electronic equipment is shielded from RF

signals. However, certain electronic equipment may not

be shielded against RF signals from your wireless phone.

• Give full attention to driving - driving safely is your

first responsibility.

• Use handsfree operation, if available.

• Pull off the road and park before making or answer-

ing a call if driving conditions so require.

Pacemakers

The Health Industry Manufacturers Association recom-

mends that a minimum separation of six (6”) inches be

maintained between a handheld wireless phone and a

pacemaker to avoid potential interference with the pace-

maker. These recommendations are consistent with the

independent research by and recommendations of Wire-

less Technology Research.

In addition, Ericsson suggests the following safe driving

tips if you are using your phone while driving:

• Get to know your wireless phone and its features

such as speed dial and redial.

• Position your wireless phone

within easy reach.

Persons with pacemakers:

• Suspend conversations during

hazardous driving conditions or

situations.

• Should ALWAYS keep the phone more than six

inches from their pacemaker when the phone is

turned ON.

• Do not take notes or look up

• Should not carry the phone in a breast pocket.

phone numbers while driving.

• Should use the ear opposite the pacemaker to mini-

mize the potential for interference.

• Dial sensibly and assess the traffic; if possible, place

calls when you are not moving or before pulling

into traffic.

• If you have any reason to suspect that interference is

taking place, turn your phone OFF immediately.

• Do not engage in stressful or emotional conversa-

tions that may be distracting.

Hearing Aids

• Use your wireless phone to call for help.

Some digital wireless phones may interfere with some

hearing aids. In the event of such interference, you may

• Use your wireless phone to help others in emergen-

cies.

Guidelines for Safe and Efficient Use

want to consult your service provider (or call the cus-

tomer service line to discuss alternatives).

Blasting Areas

To avoid interfering with blasting operations, turn your

phone OFF when in a “blasting area” or in areas posted:

“Turn off two-way radio.” Obey all signs and instruc-

tions.

Other Medical Devices

If you use any other personal medical device, consult the

manufacturer of your device to determine if it is ade-

quately shielded from external RF energy. Your physician

may be able to assist you in obtaining this information.

Potentially Explosive Atmospheres

Turn your phone OFF when in any area with a poten-

tially explosive atmosphere and obey all signs and

instructions. Sparks in such areas could cause an explo-

sion or fire resulting in bodily injury or even death.

Turn your phone OFF in health care facilities when any

regulations posted in these areas instruct you to do so.

Hospitals or health care facilities may be using equip-

ment that could be sensitive to external RF energy.

Areas with a potentially explosive atmosphere are often

but not always clearly marked. They include fueling

areas such as gasoline stations; below deck on boats; fuel

or chemical transfer or storage facilities; vehicles using

liquefied petroleum gas (such as propane or butane);

areas where the air contains chemicals or particles, such

as grain, dust, or metal powders; and any other area

where you would normally be advised to turn off your

vehicle engine.

Vehicles

RF signals may affect improperly installed or inade-

quately shielded electronic systems in motor vehicles.

Check with the manufacturer or its representative

regarding your vehicle. You should also consult the man-

ufacturer of any equipment that has been added to your

vehicle.

Posted Facilities

Turn your phone OFF in any facility where posted

For Vehicles Equipped with an Air Bag

An air bag inflates with great force. DO NOT place

objects, including both installed or portable wireless

equipment, in the area over the air bag or in the air bag

deployment area. If in-vehicle wireless equipment is

improperly installed and the air bag inflates, serious

bodily injury could result.

notices so require.

Aircraft

FCC regulations prohibit using your phone while in the

air. Switch OFF your phone before boarding an aircraft.

Guidelines for Safe and Efficient Use

Product Care and Operation

Ericsson suggests you read and observe the following for

Guidelines for Safe and Efficient Use

• Do not let the metal contacts on the battery touch

another metal object such as keys in your pocket.

This could short-circuit and damage the battery.

Battery Information

New Batteries

• Do not attempt to take a battery apart.

The battery packaged with your phone is not fully

charged. For maximum battery capacity, use your

charger to condition the battery.

• Do not expose a battery to open flame. This could

cause the battery to explode.

• Turn your phone OFF before removing the battery.

• Use only the AC/DC adapter supplied with your

battery charger. Using a different adapter could be

dangerous and will void your phone warranty.

Recycling Your Battery

Your phone manufacturer is a member of the Recharge-

able Battery Recycling Corporation (RBRC), a non-

profit service organization designed to assist in the recy-

cling of rechargeable batteries. Many areas require the

recycling of rechargeable batteries. In the U.S., call 1-

800-822-8837 to find out how to recycle your battery.

Outside the U.S., contact your local retailer for recycling

instructions.

• Never charge a battery when the ambient room

temperature is below 50° F (10°C) or above 105°F

(40°C).

• Do not allow the battery to be placed into the

mouth. Battery electrolytes may be toxic if swal-

lowed.

Battery Use and Care

Conditioning Your Battery

A rechargeable battery has a long service life if treated

properly. A new battery, or one that has not been used

for a long period of time, should be conditioned before

using your phone. Avoid recharging a fully-charged or

almost fully-charged battery. This can result in the mem-

ory effect, which causes the battery to charge to less than

its full capacity. If your phone shuts off due to low bat-

tery power, you should charge the battery within 24

hours for the battery to reach full capacity.

To condition your battery, do the following:

Charge the battery until it is fully charged.

appears in the right side of the display on

your phone when the battery is fully charged.

Disconnect the charger and leave your phone ON

until the battery is completely discharged.

A beep will sound warning you that your battery is

almost discharged. Wait until your phone turns OFF.

Your battery is now completely discharged.

• Do not leave your battery where it may be sub-

jected to extremely hot or cold temperatures. This

could reduce the battery’s capacity.

Guidelines for Safe and Efficient Use

Note! The time required to discharge a battery varies based on

the type of battery and the number and duration of

your calls.

Completely discharge the battery and fully charge it,

three times in succession to, complete the battery

conditioning procedure.

Guidelines for Safe and Efficient Use

Getting Started

Complete the following procedures to set up your

mobile phone for the first time:

While making sure that the screw is going through

both the plastic clip and through the metal support

guide, insert the screw into the opening on the back

of the phone.

• Review the document conventions used in this

guide by referring to the “Document Conventions”

chapter.

Using a small Philips head

screwdriver, turn the screw

clockwise until it is secure as

shown in the following illus-

tration. Do not over tighten

the screw.

• Attach the belt clip to the phone by referring to the

Attaching the Belt Clip to Your Phone section in

this chapter.

• Fully charge and condition your battery by refer-

ring to the Charging Your Battery section in this

chapter.

Inserting the two smaller prongs first, replace the

flexible rubber plug at the top of the clip.

• Turn your phone On by referring to the “Basic

Operations” chapter.

Swivel Belt Clip

Align the screw-in tab

Push to

release phone

between the two guides on

the back of the phone, with

the thicker end on top.

Attaching Your Standard or Swivel Belt Clip

Your Ericsson mobile phone is equipped with either a

standard or swivel belt clip:

Using a screwdriver, attach

the tab to the phone.

Place the swivel belt clip on

your belt or waistband.

Standard Belt Clip

Remove the belt clip from the plastic bag.

Slide your phone, with tab, into the swivel belt clip.

To remove, press the release mechanism on the top

of the clip and slide the phone up and out of the

clip.

Remove the flexible rubber plug from the top of the

clip.

Getting Started

Lift the battery up and out of

the battery cavity.

Connecting and Removing Your Battery

Place the battery over the back

of the phone. The label on the

battery should face down.

Charging Your Battery

Insert the top portion of the

battery into the phone. The

tab on the bottom of the bat-

tery should be pointing

toward the bottom of the

phone.

To charge your battery, complete the appropriate charg-

ing procedure described in this section.

Note! Fully charge the battery before you use your phone.

The label on your phone box identifies the charger and

battery included in the package.

Press down until you hear a

click.

Note! Never attach the charger to a phone that does not have a

battery installed.

Charge-Only Mode

If your phone is Off, attaching the charger will cause the

phone to activate in charge-only mode. When this mode

Remove the battery by push-

ing in on the tab of the bat-

tery with your thumb.

is activated the message

appears in

the display. Your phone is now fast (rapid) charging the

battery.

Note!

You cannot make or receive calls when your phone is in

charge-only mode.

Slow (Trickle) Charging a Deeply Discharged Battery

The battery may become deeply discharged (for exam-

ple, when the battery is stored for a long period). As a

Getting Started

result, the phone may not activate charge-only mode

when the charger is connected.

Rapid Charger

The rapid charger supplies power

to charge your battery while the

battery is attached to your phone.

If your phone is On, it can receive

calls while using the rapid charger.

Attach the charger to the phone for several hours to

slowly (trickle) charge the battery.

After trickle charging the battery for several hours

the phone should activate the charge-only mode

automatically.

Continue charging the phone until the battery is

fully charged.

To charge your battery using the

rapid charger:

Note! If the phone is powered On, the battery icon is replaced

by the icon once the battery is fully charged.

Plug the charger into a standard

wall electrical outlet.

Note! If the phone is in charge-only mode, Chargi ng Com-

pl eteappears in the display when the battery is fully

charged.

Hold the phone with the dis-

play and keypad facing up.

Hold the small plug on the

charger cord so the lightning

bolt symbol is up.

Selecting Your Charger

Align the small plug on the

charger cord with the connec-

tor on the bottom of your phone. The connector on

the phone is above the lightning bolt symbol.

Your phone is packaged with one of the following bat-

tery chargers:

Note! Do not twist while inserting or removing the small

• Rapid charger

• Travel charger

• Desktop charger

plug on the charger cord!

Press the plug into the connector until the plug

“snaps” into place.

Note! To disconnect the charger, lift the plug connected to the

phone upwards and pull it out.

Getting Started

Continue charging the phone until the battery is

fully charged.

Note! Do not twist while inserting or removing the small

plug on the charger cord!

Note! If the phone is powered On, the battery icon is replaced

by the icon once the battery is fully charged.

Align the small plug on the charger cord with the

connector on the bottom of your phone. The con-

nector on the phone is above the lightning bolt sym-

bol.

Note! If the phone is in charge-only mode, Chargi ng Com-

pl eteappears in the display once the battery is fully

charged.

Press the plug into the connector until the plug

“snaps” into place.

Travel Charger

Desktop Charger

The travel charger supplies power to charge your battery

while the battery is attached to your phone. If your

phone is On, it can receive calls while using the travel

charger.

The desktop charger can charge a battery attached to

your phone (standing in the front compartment of the

charger) and a separate battery (in the rear compartment

of the charger). The desktop charger can also condition

the separate battery by discharging the battery com-

pletely before beginning the charging cycle.

To charge your battery using the travel charger:

Connect

the appro-

priate AC

power cord

and phone

charging

Connecting the Power Cord to the Desk-

top Charger

To connect the charger plug to the desktop charger:

Using the lightning bolt symbols as your guide,

align the small plug on the power cord with the

receptacle on the back of the desktop charger (see

diagram on previous page).

cord to the

travel charger.

Plug the AC power cord into a standard electrical

wall outlet.

Hold the small plug with the lightning bolt symbol

facing up, and press the plug into the receptacle on

the back of the desktop charger until the plug

“snaps” into place.

Hold the phone with the display and keypad facing

up.

Hold the small plug on the charger cord so the light-

ning bolt symbol is up (see diagram on previous

page).

Getting Started

Note! Do not twist while inserting or removing the small

Charging a Separate Battery

plug on the charger cord!

Insert the battery into

the rear compartment of

the desktop charger.

Plug the AC adapter on the power cord into a wall

outlet.

The desktop charger’s

rear indicator light

comes on red when the

battery is properly

seated in the rear com-

partment.

Charging a Battery Attached to Your

Phone

If your phone is On, you can make and receive calls

while using the desktop charger.

To charge the battery using

the desktop charger:

Remove the battery from the desktop charger when

the rear indicator light turns green, which indicates

that the battery is fully charged.

Insert your phone into

Note! You can charge two batteries at the same time (one bat-

tery attached to your phone and placed in the front

compartment and another battery in the rear compart-

ment).

the front compartment of

the desktop charger.

The light on the right front corner of the desktop

charger comes on red when the phone is properly

seated in the desktop charger, and the phone’s dis-

play indicates that the battery is charging.

Conditioning Your Battery

The rear slot of the desktop charger can be used to con-

dition a battery by fully discharging the battery and then

charging the battery to full capacity. Conditioning helps

prevent the memory effect that can result from repeat-

edly charging a battery before the battery is fully dis-

charged.

Remove your

phone from the

desktop charger

when the light

turns green,

which indicates

that the battery

attached to your

phone is fully

charged.

Note! Only the rear slot on the desktop charger can be used to

condition a battery.

Insert the battery into the rear compartment of the

desktop charger.

Getting Started

Press the light on the right rear side of the desktop

charger. The light remains a steady orange while the

desktop charger discharges the battery. It can take

anywhere from two to six hours to discharge the

battery, depending on the battery type.

Note! The light turns a steady red when the desktop charger

begins charging the battery.

Remove the battery from the desktop charger when

the light turns green, which indicates that the bat-

tery is fully charged.

Getting Started

Learning About Your Mobile Phone

Your mobile phone offers the latest in TDMA technol-

ogy, operating in digital and analog modes.

• Speed dial for 99 phone numbers

• Super dial for 9 phone numbers

• 40-number incoming call log

• 40-number outgoing call log

Highlights of Your Mobile Phone

• 25 Ring Sounds (with musical ring options)

• Text message service with quick call-back

• Storage for 2KB of text messages

• Quick access to voice mail service

• Storage for two calling card numbers

• Customizable greeting

Design

• Small, contoured, and light-weight

• Full graphics display

• Active flip (answers and ends calls)

• Easy-to-use keypad layout

• Auto Area Code for roaming

• Side keys for ringer mute and volume control

• Time/Date function (system dependent)

• Call restriction capability

• Menu navigation keys (

• Adjustable ring volume

• Vibrating call alert

) on the keypad

• Call duration reminder

• Security PIN code (four digits)

• Digital voice encryption

• Missed calls indicator

• Voice mail waiting icon that displays the number of

new voice mail messages

• Nine user-definable profiles

• Call Screening

• Lighted display

• Phone Groups for phonebook organization

• Data/Fax capability (with an accessory package)

• Phone menu available in up to five languages

Features

• Storage for 250 phone numbers

Learning About Your Mobile Phone

The Parts of Your Phone

The following is a list of the terms used in this user’s

guide to describe your Ericsson mobile phone:

Antenna

Indicator Light

Earpiece

Upper Side Key

Lower Side Key

Display

YES Key

NO Key (press and hold to turn power On or Off)

Down Arrow

Up Arrow

Clear (^CLR) Key

Keypad

Battery

Charger and Handsfree Connectors

Flip

Learning About Your Mobile Phone

Active Profile Icon shows if a user-customizable

profile has been activated (Normal, Data/Fax,

Handsfree, Meeting, Weekend, or Travel). Profiles

are used to turn on/off certain phone settings to suit

a particular environment.

Phone Display Icons and Display Indicators

Phone Display Icons

The following icons are used to display the status of your

phone:

Battery Icon shows the relative strength of your

battery. A full icon indicates a fully-charged battery.

If the phone is connected to external power and the

battery is charging, the display will alternate

Voice Mail Waiting Icon

New Text Mail Icon

Keypad Locked Icon

Ringer Silent Icon

Active Profile Icon

Battery Icon

between the battery icon (

power icon ( ).

) and the external

Digital/Analog Channel Indicator shows whether

the phone is currently operating in digital or analog

mode.

Digital/Analog Channel Indicator

Signal Strength Icon

Signal Strength Icon shows the relative signal

strength from the mobile system. More bars indicate

a stronger signal.

Display Indicators

Indicator Light Functions

Voice Mail Waiting Icon indicates the number of

voice mail messages that have not been heard.

The color and state of the indicator light on top of your

phone indicates the following conditions:

New Text Mail Icon indicates the number of text

messages that have not been read.

• Slow Flashing Green: Phone is in standby mode.

Keypad Locked Icon indicates that pressing the

keys on the keypad has no effect. This eliminates the

possibility of accidentally pressing keys.

• Rapid Flashing Green: Phone is receiving a call.

• Steady Green: Phone is receiving power from an

external source, such as a travel charger.

Ringer Silent Icon indicates that your phone will

not make any keypad or ringing sounds. If activated,

the vibrator will continue to operate.

• Flashing Red: Low battery power alert.

• Flashing Orange: Phone is in standby mode, and

the vibrate alert is set to Vibrate Only.

Learning About Your Mobile Phone

Key Functions

• Press and hold from the Standby screen to enter

the quick-access menu for profile activation.

• Press to enter the main menu.

• Press to scroll up through menus and menu set-

ting selections when your phone is in menu

mode, or to scroll through stored numbers when

you are recalling numbers from your phonebook.

• Press to scroll up through messages when view-

ing text messages.

Arrow

• Press to answer a call.

• Press to make a call after entering a phone num-

ber.

• Press to store menu settings.

• Press (from the Standby screen) for the outgoing

call log.

YES

• Press and hold to scroll up through a message,

one screen at a time, when viewing text messages.

• Press and hold to move the cursor to the left

while in number-edit mode (for example, in the

Outgoing/Incoming Call Logs, and in the Call-

back Number screen).

• Press and hold after entering a phone number to

make a calling card call.

• Press and hold (during a call) to send displayed

numbers as tones.

• Press to bypass preset stops in stored number

sequences.

• Press to enter incoming call log if missed calls

text indicator is displayed.

• Press and hold from the Standby screen to recall

a phone number from your Phonebook.

• Press to enter the main menu.

• Press to scroll down through menus and menu

setting selections when your phone is in menu

mode, or to scroll through stored numbers when

you are recalling numbers from your phonebook.

• Press to scroll down through messages when

viewing text messages.

Down

Arrow

• Press and hold to turn your phone On or Off.

• Press to end a call.

• Press to exit a menu without saving changes

made in the menu.

• Press during an incoming call to mute the ringer.

• Press to clear the current display text.

• Press to return to the Standby screen.

NO,

Power On,

Power Off

• Press and hold to scroll down through a message,

one screen at a time, when viewing text messages.

• Press and hold to move the cursor to the right

while in number-edit mode (for example, in the

Outgoing/Incoming Call Logs, and in the Call-

back Number screen).

Learning About Your Mobile Phone

• Press the upper side key to temporarily mute the

ring tone when receiving a call.

• Press to increase the earpiece volume during a

call.

• Press to illuminate the back light (when the flip

is open).

• Press to erase the last digit entered on the display.

• Press and hold to clear all digits or letters you

entered.

• Press and hold to delete numbers in the Phone

Lists.

• Press and hold during a call to mute the micro-

phone. After the microphone is muted, press and

hold to disable the microphone mute.

• Press to delete a selected text message when you

are reading text messages.

CLR

Upper

Side

Key

• Press the lower side key to temporarily mute the

ring tone when receiving a call.

• Press to decrease the earpiece volume during a

call.

• Press to illuminate the back light (when the flip

is open).

Lower

Side

Key

• Press and hold for quick access to voice mail.

• Press keys 1-9 for digit entry.

Note! The upper and lower side keys are only par-

tially enabled when the flip on your phone

is closed. This conserves battery power by

preventing accidental key presses when your

phone is not in use.

• Press and hold keys 1-9 for Super Dial.

• Press keys 1-9 for text-entry into the Phone Lists

or to customize the greeting.

• Press * to toggle between uppercase and lower-

case letters while entering text.

Digit

Keys

• Open to answer calls and close to end calls (if the

answer option is set to flip/yes or flip/any key).

• If the flip is not enabled, close the flip to mute

the microphone during a call. After the micro-

phone is muted, open the flip to disable the

microphone mute and continue your call.

• Press # to enter symbols while entering text.

Flip

Learning About Your Mobile Phone

Display Messages

The phone is locked to prevent unauthorized use.

The keypad is locked to prevent accidental use.

The following are common display messages on your

mobile phone:

Your phone is receiving a call.

The icon in the upper right corner of the display

indicates that a profile is active (in this case, the

Handsfree profile is indicated by the "car" icon).

Your phone is dialing the number shown in the dis-

play.

You attempted to call a phone number that is

restricted in the Lock Dial submenu.

You have an active call.

The phone is in charge-only mode and will not

make or receive calls.

The battery is reaching its lowest operational power

level.

Battery charging is finished.

The phone ringer is muted.

The phone is searching for a mobile system.

The number of calls you have not answered.

The microphone is muted.

You have an active data/fax call.

Learning About Your Mobile Phone

Basic Operations

Summary of Basic Operations

To Do This:

Press This:

YES

Call the phone number shown in the display

YES

Recall a last dialed phone number from the

Outgoing Log

To Do This:

Press This:

Turn your phone On

Press and hold ^NO

Press and hold NO

Lower side key

Upper side key

YES or open the flip

NO or close the flip

Save the text message you are reading

Select a highlighted menu setting

Turn Keypad Lock On or Off

Turn Phone Silent On or Off

Press and hold YES

Turn your phone Off

YES

Decrease ear volume during a call

Increase ear volume during a call

Answer a call

or then *

or then #

Call the phone number in the display using Press and hold ^YES

calling card

End a call

Access the main menu

Send DTMF tones during a call

Mute your voice during a call

Press and hold YES

Access the main menu during call

Go back one level in menu mode

Exit menu mode from any menu level

Scroll through menus or menu settings

Erase the last digit or letter entered

Erase all digits or letters entered

Enter Incoming Log

Press and hold CLR

or close the flip (if it is not

enabled)

CLR

Mute the ringer when a call is received

Quick access to phonebook

NO or either side key

Press and hold

CLR

Quick access to profile activation

Quick access to voice mail

Press and hold

Press and hold CLR

YES from the Missed Calls

Press and hold

Indicator screen

Basic Operations

Latin American Spanish, Brazilian Portuguese, and

Hebrew.

Turning Your Phone On and Off

Note! The available languages may vary by region.

After you have installed a fully charged battery in your

phone, turn your phone On by pressing and holding ^NO

until your phone sounds a beep.

Press ^YESto select the language.

Sel ecti on Stored!appears in the display.

Note! If you have the vibrate option activated, the phone will

Press ^NOto return to the previous screen.

Press ^CLRto return to the Standby screen.

also briefly vibrate.

To turn your phone Off, press and hold ^NOuntil your

phone sounds a beep and turns off.

Setting the Ring Sound

Setting the Display Language

To select the ring sound for your mobile phone:

You can set the language used to display the menus for

your mobile phone.

5 2

To change the display language:

Turn your phone On.

Press or from the Standby screen to access the

main menu.

4 5

Press ⁵to display the SOUNDS Menu.

Press ²to display the Ring Sound submenu.

Ri ng Soundappears in the display.

Turn your phone On.

Press or from the Standby screen to access the

main menu.

Press the or repeatedly until the appropriate

ring sound is highlighted. You will hear two ring

cycles of the each ring sound as you scroll through

the list of ring sounds.

Press ⁴to display the SETTINGS menu.

Press ⁵to display the Language submenu.

Press the or repeatedly until the appropriate

language option is highlighted. The language

options are American English, Canadian French,

Basic Operations

When the appropriate ring sound is highlighted,

press ^YES. Sel ecti on Stored!appears in the

display.

Making a Call

Enter the phone number you want to call by press-

ing the numeric keys. The phone number is shown

in the display.

Press ^NOto return to the previous screen.

Press ^CLRto return to the Standby screen.

Note! You can press ^CLRto erase one or more digits in the dis-

play, or press and hold ^CLRto erase all digits.

Setting the Ring Volume

Press ^YES. Connecti ng is shown in the display

while your phone accesses the mobile network.

To select the ring volume for your mobile phone:

When the call is connected, I n Usewill display on

your screen and your call timer will indicate the

duration of your call. The phone number that you

dialed will remain on your screen.

5 3

Turn your phone On.

Press or from the Standby screen to access the

main menu.

Press ⁵to display the SOUNDS Menu.

Press ³to display the Ring Volume submenu.

Ri ng Vol umeappears in the display.

When you finish your conversation, press ^NOor

close the flip to end the call.

Press the or repeatedly until the appropriate

ring volume is highlighted. You will hear two ring

cycles of the currently selected ring sound as you

scroll each volume selection.

Auto Retry

If you try to place a call and the mobile network is not

available, your phone automatically redials the phone

number every 15 seconds for three minutes if the Auto

Retry feature is enabled. See the section on Auto Retry

in the “Menu Descriptions” chapter.

When the appropriate ring volume is highlighted,

press ^YES. Sel ecti on Stored!appears in the

display.

Press ^NOto return to the previous screen.

Press ^CLRto return to the Standby screen.

Basic Operations

Note! Do not use the NO key to mute the ringer if the flip is

closed and active. Opening the flip will answer the call.

Pressing NO will end the call.

Answering a Call

When your phone

receives a call, the ring

tone sounds (unless you

Muting the Microphone During a Call

have disabled it through

the SOUNDS menu),

To mute the microphone during a call, press and hold

the ^CLRkey.

the words I ncomi ng Cal l flash in the display, the dis-

play and keypad back light flash, and the indicator light

on top of the phone rapidly flashes green. If you have

Caller Number Identification (Caller ID) service from

your service provider, the caller's phone number is

shown in the display. If the caller's phone number is

stored in the phonebook, the name stored with the

phone number is also shown when the call is received.

Mi c Mutedappears in the display when the call is

muted. Repeat this procedure to return to your call.

Note! If your flip has not been set to answer or end the call,

then closing the flip mutes the call, and opening the flip

disables the mute and resumes your call.

Increasing or Decreasing Ear Volume During a Call

Open the flip to answer the call. If the flip has been

deactivated in the ANSWER OPT menu, answer

the phone by opening the flip and pressing ^YES.

The words I ncomi ng Cal l are replaced by the

call timer display.

To adjust the ear volume during a call:

• Press the upper side key to increase the ear volume.

• Press the lower side key to decrease the ear volume.

When you finish your conversation, press ^NOor

close the flip to end the call.

Call Waiting

If you have call waiting service from your service pro-

vider, press ^YESto answer a call when you receive the call

waiting signal. You can switch between the two calls by

pressing ^YES. Do not press NO until you are ready to end

both calls.

Temporarily Muting the Ring Tone

To temporarily mute the ring tone without answering

the call, press either the upper or lower side key, or if the

flip is open, press ^NO.

I ncomi ng Cal l is still shown in the display, and you

can still answer the call by opening the flip or by press-

ing ^YES.

Basic Operations

You can delete a phone number from the Outgoing Log

by pressing and holding ^CLRwhile the phone number is

shown in the display.

Unanswered Calls

Your phone's display shows the number of calls you have

received but did not answer. You can clear the number

from the display by pressing any key or by turning the

phone Off.

Super Dial

The Super Dial feature, when enabled through the

CALL MANAGER menu, lets you use one-touch dial-

ing for phone numbers stored in phonebook positions 1

through 9.

If Caller Number Identification is available from your

carrier, unanswered calls will be stored in the Incoming

Log of the PHONE LISTS menu. To quickly access

your Incoming Log, press ^YESfrom the Missed Call

Indicator screen shown below.

To use Super Dial, press and hold the numeric key (^{1 - 9})

that corresponds to the phonebook position containing

the phone number you want to call. For example, if you

want to call the phone number stored in phonebook

position 7, press and hold ⁷.

Note! When the flip is open, pressing the upper or lower side

key will turn on the back light without clearing the dis-

play. This is useful at night when checking for missed

calls.

Speed Dial

The Speed Dial feature, when enabled through the

CALL MANAGER menu, lets you quickly dial a phone

number stored in your phonebook.

Redialing the Last Phone Number You Called

Your telephone temporarily stores phone numbers you

have previously called. To view these phone numbers,

press YES from the Standby screen. The last phone

number you called is shown in the display. Press or

to scroll through the other phone numbers. You can

place a call to a phone number shown in the display by

pressing ^YES. You can also view the last phone numbers

you called through the Outgoing Log of the PHONE

LISTS Menu.

To use Speed Dial, enter the number of the phonebook

position containing the phone number you want to call,

then press ^YES. For example, if you want to call the

phone number stored in phonebook position 12, press ¹,

press ²and press YES. Positions 1-99 can be used to store

Speed Dial phone numbers.

Stop and Pause Dialing

Stop and pause dialing lets you enter groups of numbers

with stops and pauses between each group of numbers.

This feature is useful when you need to dial a phone

Basic Operations

number and then another number, such as an access

number for an answering machine or voice mail system.

You can also store groups of numbers, which can include

stops and pauses in a phonebook position. You can then

dial the numbers by entering the phonebook position

and pressing ^YESuntil the phone dials the phone num-

ber.

Stop Dialing

A stop causes the phone to stop transmitting numbers

until you press ^YES. You can enter a stop in a series of

digits by pressing and holding # until

display.

is shown in the

Emergency Calls

Your phone was programmed with an emergency num-

ber (911) when it was manufactured. The programmed

emergency number can be dialed and called at any time,

if there is an emergency system available, regardless of

any call restrictions you have set through the CALL

MANAGER menu.

Pause Dialing

A pause temporarily suspends transmitting numbers for

approximately two seconds before sending the next

series. You can enter a pause in a series of digits by press-

ing and holding ^*until

is shown in the display.

For example, if your office has a voice mail system that

requires you to dial a phone number, followed by your

extension, followed by an access code, you could enter

Note! The Keypad Lock feature prohibits emergency number

access (911) until unlocked.

A representative from your service provider or the retail

outlet where you purchased your phone should be able

to change the emergency number in your phone if a 911

system is not available in your service area.

the following: 555-1111 2222 33333 where 555-

1111 is the phone number to enter your voice mail sys-

tem.

is a stop. 2222 is your extension.

is a pause.

33333 is your access code.

If police, fire, or medical help is needed, dial 911 or your

emergency number and press ^YES. Tell the dispatcher

that you are calling from a mobile phone. Mobile 911

calls do not automatically provide emergency personnel

with your name, location, or phone number. The dis-

patcher will want to know the following:

When you press ^YES, your phone dials the phone num-

ber and then stops transmitting tones. When your voice

mail system asks for your extension you would press YES

to transmit your extension. The access code is sent after

the pause. If the timing in your voice mail system

requires a pause longer than two seconds, you could

enter a stop instead of the pause, or use multiple pauses.

Your name and mobile phone number.

The nature of the emergency.

Basic Operations

If police, fire, or medical assistance is needed.

Low Battery Power Alert

The exact location of the emergency, including cross

streets, mileposts, or landmarks.

The low battery alert sounds when your battery is reach-

ing its lowest operational power level. The words Low

Batteryflash in the display, and the indicator light on

top of your phone flashes red. When this happens, leave

your phone turned on. The phone discharges the battery

and then automatically turns off. You should charge the

battery within 24 hours after a complete discharge so

that the battery can charge to full capacity.

How many people are involved, their condition, and

if help is being administered.

International Calls

If allowed by your service provider, you can place inter-

national calls with your phone just as you would from

any other phone. If you have difficulty completing inter-

national calls, check with your service provider for infor-

mation.

Security Code

Your phone has a security code that you must enter to

gain access to certain functions, such as call restrictions

and calling card numbers. The factory-programmed

code is 0000. You can change this code to provide maxi-

mum security for your phone. See the section on your

security code in the “Menu Descriptions” chapter. If you

forget your security code, contact your service provider

for assistance.

Caller Number Identification

If your service provider has Caller Number Identifica-

tion (Caller ID) service, your phone shows the phone

number of an incoming call in the display. Also, if the

phone number is one that you have stored in your

phonebook with a name, the name is shown with the

phone number when your phone rings. If the Caller ID

information is not available, the message NO I Dis

shown in the display. The word Pri vatemay be

shown if the Caller ID is restricted by the service pro-

vider.

Basic Operations

Using Menus

Read this chapter thoroughly to understand how to use

your phone’s menus, how to navigate through the menu

system, and how to change the menu settings.

Press or from the Standby screen to access the

main menu.

Press ^YESfrom the main menu when the menu that

you want to open is highlighted.

Your phone's menus are an easy way for you to:

Press or to scroll through the list of submenus.

• Store and recall phone numbers from your phone-

book

When the submenu that you want to open is high-

lighted, press ^YES. The list of settings for the sub-

menu appears in the display.

• Read text messages and check voice mail

• Set up call features

You can scroll through the list of settings by pressing

• Change ring sound and other sound settings

• Change other settings for your phone

To back up to the list of submenus, press ^NO. Press-

ing ^NOfrom a list of submenu settings returns you

to the main menu list. Pressing ^CLRfrom any menu

level, exits the menu and returns your phone to the

Standby screen.

Opening Menus

Press or from the Standby screen to access the main

menu.

Changing Settings

Press ^NOto return to the pervious screen.

Press ^CLRto return to the Standby screen.

Open the menus as described in the previous section,

then:

Press or to scroll through the list until the set-

ting you want to change is highlighted.

Opening Submenus

Press ^YES. The choices available for the setting are

shown in the display. The currently active choice is

To open one of the submenus:

Using Menus

indicated by a filled radio button ( ). Some set-

tings have two choices, such as On and Off for the

Speed Dial setting in the CALL MANAGER

menu. Other settings have a list of choices, such as

the Ring Volume setting in the SOUNDS menu.

Quick Menu Access

If you know the numbers associated with the menu you

want to change, you can quickly access that submenu

and setting by pressing or , followed by the number

of the main menu, and then the number of the sub-

menu.

Press or to scroll through the list of choices

until the choice you want is highlighted. If the set-

ting has only two choices, press either of these keys

to toggle between the two choices. The active choice

is indicated with a filled radio button.

For example, suppose you want to change the sound the

keys on your phone make when you press them. If the

SOUNDS menu is number 5, and the Key Sound sub-

menu is number 6, you could press or , then ⁵, then

⁶to go directly to the choices for Key Sound.

Press ^YESto store the choice you selected or press NO

if you want to exit the menus without storing any

changes you have made. If you store your changes,

Sel ecti on Stored!will appear briefly in the

display. The list of submenus is then shown in the

display.

Quick access shortcuts to your phone’s menus and sub-

menus are identified using the hourglass symbol ( ).

Menu Overview

Exiting the Menu

An illustration of your phone’s menu system is shown on

the inside of the front cover of this user’s guide.

Press NO at any menu level to go back one level. To exit

to the Standby screen, continue pressing ^NO. Pressing

CLR from any menu level returns your phone to the

Standby screen.

A summary of the basic operations for your phone is

provided in this user’s guide in the “Basic Operations”

chapter.

If you receive a call while you are in one of the menus,

the phone automatically exits menu mode to allow you

to answer the call.

Using Menus

Menu Descriptions

The main menu has six icons that display the top-level

Press or to scroll through menus, functions in

menus, and settings in a function.

menu options. The corresponding option title of the

selected option is displayed below the menu tabs when

highlighted. Each menu is represented by an icon.

Press ^YESto select the menu, function, or setting

that is highlighted.

Press ^NOto go back one level in the menu structure.

Press ^CLRto exit the menus completely.

Option 1 is the PHONE LISTS menu.

Option 2 is the MESSAGES menu.

Option 3 is the CALL MANAGER menu.

Option 4 is the SETTINGS menu.

Option 5 is the SOUNDS menu.

Phone Lists Menu

The PHONE LISTS menu contains the following

choices for storing, organizing, and recalling Phone Lists

and call information.

Option 6 is the PROFILES menu.

Note! The profile icon ( ) refers to submenus that are pro-

file-dependent. Profile-dependent submenus may be

customized for every profile to suit a particular environ-

ment. Refer to “Profiles Menu” on page 43.

Add Entry

The Add Entry submenu allows you to store a phone

number and an accompanying name in your phone-

book.

Accessing Menus

Recall Entry

The Recall Entry submenu allows you to recall a phone

number by the name stored with the phone number or

by the phonebook position number. You can also access

Press or to access the menus:

Menu Descriptions

the Recall Entry submenu by pressing and holding

from the Standby screen.

Incoming Log

If you have Caller ID service from your service provider,

the Incoming Log submenu lists the last 40 calls

received with caller ID (the latest call appears first). To

dial the phone number shown in the display, press ^YES.

Phone Groups

The Phone Groups submenu allows you to organize the

members of your phonebook into categories. Each cate-

gory can then have a ring sound associated with it and

can be used for call screening if your network supports

Caller ID. Refer to the Screen Calls section later in this

chapter for more information about call screening. The

10 options for Phone Groups are Personal, Family,

Friends, Business, Work, Team, School, Group A,

Group B, and Group C.

If Caller Number Identification is available from your

carrier, unanswered calls will be stored in the Incoming

Log of the PHONE LISTS menu. To quickly access

your Incoming Log, press ^YESfrom the Missed Call

Indicator screen shown below.

Use the or keys to scroll through the last 40

received calls. If the received number is stored in the

phonebook with a name, the name is also shown in the

display.

Outgoing Log

The Outgoing Log submenu allows you to view and

edit the last 40 phone numbers that you have called. The

cursor is at the left and can be moved by pressing and

holding the or key. The Outgoing Log submenu

lists the last 40 numbers dialed. The most recently dialed

number appears first.

You can also access the Outgoing Log by pressing ^YES

from the Standby screen. Use the or keys to scroll

through the last 40 numbers dialed. If the last dialed

number is stored in the phonebook with a name, the

name is also shown in the display. To dial the phone

number shown in the display, press ^YES.

The cursor is at the left and can be moved by pressing

and holding the or key.

Calling Card 1 and Calling Card 2

The Calling Card 1 and Calling Card 2 submenus

allow you to store calling card numbers to use for mak-

ing long distance calls.

Menu Descriptions

Note! You will be prompted to enter your security code to

enter the Calling Card 1 and Calling Card 2 sub-

menus.

Press ^YESto store the number.

Changing the Domestic or International

Calling Pattern

Setting Up Your Calling Cards

To set up your calling cards, make sure you have the

Calling Card Access Numbers (numbers provided by

your long distance carrier) and the Verification Numbers

(numbers you must enter to allow the calling card call to

be completed)

If your long distance carrier requires a unique dialing

sequence, you may need to change the calling pattern.

The calling pattern determines when the numbers are

transmitted by your phone. The default calling pattern

is:

• Access number

• Stop

To set up your calling cards, complete the following

steps.

• Verification number

• Stop

Press or from the Standby screen to access the

main menu.

• Area code and phone number

To change the calling pattern:

Press ^YESwhen the PHONE LISTS menu is high-

lighted.

Press or until the Calling Card 1 or Calling

Card 2 submenu is highlighted.

After Step 11 under Setting Up Your Calling Cards,

press until Domesti cor I nternati onal is

highlighted.

Press ^YESto open one of the Calling Card sub-

menus.

Press ^YESto select the highlighted option.

You are prompted to enter your security code.

Press to scroll through the calling pattern order.

Press or until Veri f Numberis highlighted.

Press ^YESto select Veri f Number.

Enter the calling card verification number.

Press ^YESto store the number.

To change the calling pattern order, press until

the the setting you want to change is highlighted.

Press ¹to scroll through the options for that setting.

When you have the calling pattern order you want,

press ^YESto store the selection.

Press to highlight Access Number.

Press ^YESto select Access Number.

Enter the calling card access number.

Menu Descriptions

Press ^YESto select the card you want to use.

Placing a Calling Card Call

Enter or recall the phone number you want to call.

Phone Number

Press and hold ^YES. The calling card number and

the active calling card are shown in the display.

The Phone Number submenu is used to display the

mobile phone number(s) that are programmed into your

phone.

The currently active phone number will be selected

when you enter the Phone Number submenu. To select

a different phone number, press or until the num-

ber you want to select is highlighted. Press ^YESto select

the phone number.

Release the key after the number has been displayed.

If you are using stops between numbers, you must

press ^YESor any number key to send the next

sequence of numbers. If you use pauses, the num-

bers are sent automatically after the specified length

of time chosen in the Domestic or International

calling pattern.

Note! Contact your service provider to determine if your

phone supports multiple phone numbers/subscriptions.

The ability to add a second subscription is an optional

feature that may be allowed by your service provider. If

available, this offers you the option of adding a second

telephone number to your mobile phone so that it will

be more useful in areas to which you frequently roam.

Your second subscription may be obtained from your

current mobile service provider or from a second service

provider. It is particularly useful where international

roaming is not yet available. If you have multiple sub-

scriptions, you may switch phone numbers by doing the

following:

Default Card

The Default Card submenu allows you to assign one

calling card as your default calling card. To select which

calling card is your default calling card, do the following:

Press or from the Standby screen to access the

main menu.

Press ^YESwhen the PHONE LISTS menu is high-

lighted.

Press or until Default Card is highlighted.

Press or from the Standby screen to access the

main menu.

Press ^YESto open the Default Card submenu.

Press or until Card One or Card Twois

highlighted (the current selection will be indicated

by a filled radio button).

Press ^YESwhen the PHONE LISTS menu is high-

lighted.

Press or until Phone Number is highlighted.

Menu Descriptions

Press ^YESto open the Phone Number submenu.

New Messages

The New Messages submenu allows you to view your

unread text messages if you have text message service

from your service provider. A number and the text mes-

Press or until the appropriate phone number is

highlighted.

When the appropriate phone number is high-

lighted, press ^YESto switch to that phone number.

sage icon ( ) appear in the Standby screen to indicate

the number of new unread text messages.

Press ^NOto return to the previous screen or press

CLR to return to Standby screen.

Old Messages

Erase All

Note! You can store specific voice mail access numbers for each

mobile phone number. Calls or edits to your voice mail

access number apply to the currently selected mobile

phone number only.

The Old Messages submenu allows you to view your

saved or previously read text messages if you have text

message service from your service provider.

Memory Used

The Erase All submenu allows you to erase all of your

previously-read unsaved text messages. You can use this

submenu if you have text message service from your ser-

vice provider.

The Memory Used submenu is used to display the

number of phonebook positions that are occupied and

the number of phonebook positions that are available.

Note! You will be prompted to enter your security code to

enter the Erase All submenu.

Messages Menu

Memory Used

The Memory Used submenu displays the percentage of

the phone’s memory that is occupied and the percentage

of the phone’s memory that is available.

The MESSAGES menu contains choices for specifying

and accessing message services that may be available

from your service provider (for example, text messages

and voice mail).

Voice Mail

The Voice Mail submenu allows you to enter and access

your voice mail access number, if you have voice mail

service from your service provider.

Menu Descriptions

• Flip/^YESkey - Open the flip or press YES to answer

calls.

Call Manager Menu

• Flip/Any key - Open the flip or press any key to

answer calls.

• Any key - Press any key to answer calls.

• Auto answer - Call will be answered automatically

(available only with a handsfree device).

The CALL MANAGER menu allows you to view infor-

mation and establish dialing and answering preferences

for your phone (some selections available in this menu

are dependent on your service provider). It also enables

you to view and edit system options and call statistics.

Auto Area

The Auto Area submenu allows you to store an area

code that will be automatically added to the 7-digit

phone number you are dialing. Enter the area code on

the display, then select Onto activate the feature.

Last Call

The Last Call submenu indicates the approximate dura-

tion of the last call, in minutes and seconds. It resets

after 999 minutes.

The two settings for this function are On and Off. The

area code is automatically added to the phone number

you are calling when Auto Area is set to On, and you

are not in your home system.

Call Totals

The Call Totals submenu shows you the total number

of calls and the total hours and minutes that have been

used. The Call Totals timer can be reset by pressing

until Reset?appears in the display. When prompted

by Reset?press ^YES. Counter has been reset!

appears in the display.

Auto Prefix

The Auto Prefix submenu allows you to store a 1- to

12-digit prefix which is automatically added to the

dialed phone number. When you dial a 4- or 5-digit

phone number, the prefix is automatically added to the

phone number.

Answer Option

In order to send a number to office extensions, store the

3-digit prefix in the Auto Prefix submenu. You only

need to dial the last 4 or 5 digits of the phone number.

The Answer Opt submenu allows you to select one of

the following methods for answering calls:

•

YES key - Press YES to answer calls.

Menu Descriptions

For example, if you save 123 as the auto prefix and the

function is On, you can call 123-7654 by simply dialing

7654. The prefix 123 is automatically added to the

phone number after you press ^YESto dial the phone

number. The auto prefix is not added for phone num-

bers longer than 5 digits.

menu varies according to country. Selections for this

function include:

• If you select No restri cti ons, your phone has

no outgoing call restrictions.

• If you select Restri ct al l di al i ng, your

phone will only allow dialing of emergency phone

numbers.

Auto Retry

• If you select Al l ow onl y l ocal +800#, your

phone will only allow dialing of phone numbers

with up to seven digits and phone numbers with 10

or more digits that begin with 800, 888, or 877.

The phone will not allow operator access.

The Auto Retry submenu, when enabled, repeats a call

attempt every 15 seconds for up to three minutes if the

call cannot be delivered through the mobile system. The

two options for the Auto Retry submenu are On and

Off.

• If you select Al l ow onl y phonebook, your

phone will only allow calls to phone numbers stored

in your phonebook. Phone numbers cannot be

stored in your phonebook while this restriction is

enabled.

Speed Dial

Super Dial

The Speed Dial submenu allows you to dial a phone

number stored in a phonebook position by entering the

1- or 2-digit position and pressing ^YES. The two

options for Speed Dial are On and Off.

• If you select Restri ct i nternati onal , your

phone will not allow dialing of phone numbers that

begin with 0, 01, and 011. The phone will not

allow operator access.

The Super Dial submenu allows you to dial a phone

number stored in phonebook positions 1 through 9 by

pressing and holding the numeric key corresponding to

the phonebook position. The two options for Super

Dial are On and Off.

• If you select Restri ct 900#, your phone will

not allow you to dial phone numbers with 10 or

more digits that begin with 900. The phone will

not allow operator access.

• If you select Restri ct cal l i ng card, your

phone will not allow the use of calling card num-

bers stored in the Calling Card 1 or Calling Card

2 submenus.

Lock Dial

The Lock Dial submenu is used to limit outgoing calls.

The functionality of the dialing options in the LOCKS

Menu Descriptions

Note! You will be prompted to enter your security code to

Power On Lock

enter the Lock Dial submenu.

The PowerOn Lock submenu restricts you from mak-

ing calls each time you turn the phone on. To unlock

the phone, enter the security code.

Lock Receive

The Lock Recv submenu allows you to restrict incom-

ing phone calls. The two options are Allow and Restrict.

If Restrict is selected, the phone does not ring for incom-

ing calls.

If a call is received while PowerOn Lock is active, you

must enter your security code to answer the call.

Note! You will be prompted to enter your security code to

enter the PowerOn Lock submenu.

Note! You will be prompted to enter your security code to

enter the Lock Recv submenu.

Keypad Lock

The Keypad Lock submenu restricts you from using the

keypad. The keypad remains locked until you do one of

the following:

Settings Menu

• Turn the phone off by pressing and holding ^NO,

and then turn the phone back on by again pressing

and holding ^NO.

• Press or , highlight the on or off setting you

want to choose, and press ^YESto select.

Security Code

The SecurityCode submenu allows you to gain access to

certain functions, such as call restrictions and calling

card numbers. The factory-programmed code is 0000.

You can change this code to provide maximum security

for your phone. If you forget your security code, contact

your service provider for assistance.

• Receive a call (after the call is completed, the key-

pad is returned to the locked state).

Note! The Keypad Lock feature prohibits emergency number

access (911) until unlocked.

and * toggles Keypad Lock

Note! You will be prompted to enter your security code to

on and off.

enter the SecurityCode submenu.

Menu Descriptions

If Voice Privacy is requested but not granted, your

phone sounds a warning tone indicating that Voice Pri-

vacy is not active. The tone sounds at the beginning of

the call, and then every 30 seconds during the call, as a

reminder. The three settings for the Voice Privacy func-

tion are On-no warn, On-warning, and Off.

Time/Date

Language

The Time/Date submenu allows you to retrieve the time

and date from the system, if this feature is available from

the service provider.

The Language submenu allows you to select the display

language used in the phone display. The languages vary

between markets. Your mobile phone supports Ameri-

can English, Canadian French, Latin American Spanish,

Brazilian Portuguese, and Hebrew.

Back Light

Contrast

Use the Back Light submenu to set the display and key-

pad backlighting to stay Off or to automatically turn On

for 20 seconds when a call is received or a key is pressed.

The two settings for Back Light are Auto and Off.

Greeting

The Greeting submenu allows you to enter a three-line,

42-character message (14 characters per line) that dis-

plays when you turn the phone On. The greeting func-

tion is automatically turned off if no characters are

entered. Use the keypad to enter letters, numbers, and

symbols. Refer to the section Entering Letters and Sym-

bols in the "Using the Phonebook" chapter for more

information.

Use the Contrast submenu to change the phone display

contrast setting. The five settings for the Contrast func-

tion are Very Light, Light, Medium, Dark, and Very

Dark.

System Select

The System Select submenu allows you to prioritize and

manually select the systems from which you can obtain

service. This can include your public home system as

well as private and residential systems. This function is

particularly useful if you have access to more than one

mobile system. Only systems that are currently available

can be selected. This varies depending on your geo-

graphic location. The following submenus are used to

customize your System Select options:

Voice Privacy

The Voice Privacy submenu allows you to request voice

privacy service if your service provider offers digital voice

encryption.

Voice Privacy service is not available in all areas. If voice

privacy is active, the digital voice privacy indicator text,

, is shown in the display.

Menu Descriptions

Find Network

Private Network

Your phone should be configured by your service pro-

vider for optimal network selection during roaming. If

your service provider allows, you can override the pre-

configured selection by doing the following:

Priority

Priority allows you to change the priority of the system

types for which your phone searches. Your default prior-

ity is (1) Public, (2) Private, and (3) Residential. This

means that your phone will look for service on a public

system first, followed by a private system, followed by a

residential system.

Press or from the Standby screen to highlight

the SETTINGS menu.

Press ^YESto open the SETTINGS menu.

Press or until the System Select submenu is

To reset your Priority options, do the following:

highlighted.

Press or from the Standby screen to highlight

the SETTINGS menu.

Press ^YESto open the System Select submenu.

Press or until Find Network is highlighted.

Press ^YESto select Find Network.

Press ^YESto open the SETTINGS menu.

Press or until the System Select submenu is

highlighted.

Press or until the desired system is highlighted.

When the desired system is highlighted, press ^YESto

switch to that system.

Press ^YESto open the System Select submenu.

Press or until Priority is highlighted.

Press ^YESto select Priority.

Press ^NOto return to the previous screen or press

CLR to return to the Standby screen.

Press or to highlight a specific service.

Home Only

Press ¹to set the priority of the highlighted item to

first. Press ²to set the priority of the highlighted

item to second. Press ³to set the priority of the

highlighted item to third.

The availability of the Home Only menu item is depen-

dent on your cellular provider’s phone setup. Home

Only allows your phone look only for your home cellu-

lar system when you turn on the phone. The phone does

not search for other systems if your home system is not

available.

Search allows you to manually switch to another system.

Your phone will begin to search for all systems that have

been programmed into your phone. Once the search is

complete, you will be provided with a list of available

Menu Descriptions

and unavailable systems. If you want to switch to

another system, do the following:

Press or until Add Systems is highlighted.

Press ^YESto select Add Systems.

Press or from the Standby screen to highlight

Press or until the system that you want to add

to your phone’s memory is highlighted.

the SETTINGS menu.

Press ^YESto open the SETTINGS menu.

Press ^YESto add the highlighted system to your

phone’s memory.

Press or until the System Select submenu is

highlighted.

Note! You can press ^NOat any time to stop the Search and

return to the Standby screen.

Press ^YESto open the System Select submenu.

Press or until Manual Search is highlighted.

Press ^YESto select Manual Search.

Sounds Menu

Press or until a specific system is highlighted.

Press ^YESto select the highlighted system.

Note! You can press ^NOat any time to stop the Search and

return to the Standby screen.

The SOUNDS menu contains the following choices for

setting the different volumes and sounds for ringing,

keypad, earpiece, and handsfree kits.

Add Systems

Add Systems allows you to add new systems to the pro-

grammed list of systems. When this feature is selected,

the phone will begin searching for all systems that are

available. To add one of the systems to your phone’s

memory, do the following:

Phone Silent

When Phone Silent is enabled, your phone does not

make any keypad or ringing sounds. The icon ( ) is

shown in the display when the phone is in silent mode.

The vibrator will continue to operate when Phone

Press or from the Standby screen to highlight

the SETTINGS menu.

Press ^YESto open the SETTINGS menu.

Press or until the System Select submenu is

highlighted.

Press ^YESto open the System Select submenu.

Menu Descriptions

Silent is selected. The two options for Phone Silent are

adjust the volume during a call by using the side volume

keys. There are six volume levels.

On or Off.

Key Sound

and # toggles Phone Silent

The Key Sound submenu allows you to choose the

sound made when you press keys. The four options for

Key Sound are Click, Continuous, Burst, or Silent.

on and off.

Ring Sound

Ring Volume

The Ring Sound submenu allows you to choose the

type of sound or melody for the ringer. Each sound or

melody is demonstrated as you scroll through the selec-

tions. There are 25 pre-defined ring sounds.

Access Tone

The Access Tone submenu allows you to sound three

short beeps to indicate your outgoing call has been con-

nected to the mobile system. The two options for Access

Tone are On and Off.

The Ring Volume submenu allows you to set the level

of the ring volume from Extra-Low, Low, Medium,

High, Escalating, or Off. The Escalating volume setting

rises in steps from the lowest to the highest level as the

phone continues to ring.

Minute Alert

Tone Send

The MinuteAlert submenu, when turned On, times

your calls by sounding a short beep in the ear piece or

handsfree loudspeaker about 10 seconds before each full

minute during a call. The two options for MinuteAlert

are On and Off.

Vibrate

The Vibrate submenu allows you to enable vibrating call

alert for incoming call notification. The three options

for Vibrate are Vibrate Only, Ring/Vibrate, and Ring

Only.

The Tone Send submenu, when enabled, allows your

phone to send DTMF tones during a call. This allows

operations like electronic banking and other DTMF

tone-operated activities. The two options for Tone Send

are On and Off. When Tone Send is turned Off, your

phone does not send DTMF tones. The two options for

Tone Send are On and Off.

Ear Volume

The Ear Volume submenu allows you to adjust the vol-

ume of the earpiece using the menu setting. You can also

Menu Descriptions

Message Alert

The Msg Alert submenu allows you to turn On or Off

the tone that sounds when an incoming text message or

a message waiting signal is received. The two options for

Msg Alert are On and Off.

Profiles Menu

Your Ericsson mobile phone has nine user-customizable

profiles which allow you to adapt to several different

Menu Descriptions

return the phone to its factory settings. Your security

code is not reset.

desired group ( ). Once you have selected all the

groups to be screened, press ^YESto exit.

Note! You will be prompted to enter your security code to

Screen calls is a profile-dependent feature. You can spec-

ify groups of callers that will be restricted from ringing

through in each of the 9 profiles.

enter the Reset Profile submenu.

Reset Menu

Next Call Type

Use the Reset Menu submenu to return all menu selec-

tions to the original factory settings. The Reset Menu

function will return all profile features and non-profile

features to their factory settings. Press ^YESto return the

phone to its factory settings. Your security code is reset

to the original factory setting (0000).

Use the NextCallType submenu to specify what type of

call you will receive next. The three options for Next-

CallType are Voice call, Data call, and Fax call. For

example, if someone calls you to let you know that they

are going to send you a fax, you can plug your phone

into your personal computer, set the NextCallType to

Fax call, and you are ready to receive the fax.

Note! You will be prompted to enter your security code to

enter the Reset Menu submenu.

Note! If you are having problems receiving a data or fax call, be

sure to set your NextCallType to Data call or Fax call.

For more information on connecting your mobile phone

to your computer and initiating a fax call, refer to the

“Data, Fax, and Internet Calls” chapter.

Note! If NextCallType is set to Fax call or Data call, your

phone will not receive voice calls. The NextCallType

setting is valid until the next incoming call is received.

After the call is received, the NextCallType setting

defaults to Voice call.

Reset Profile

Use the Reset Profile submenu to quickly return the

currently active profile to its original factory settings for

every profile feature throughout the menus. Press ^YESto

Menu Descriptions

Using the Phonebook

You can store phone numbers and associated names in

Storing a Phone Number Using the Phone Lists Menu

your phone’s phonebook to use for Recall Dialing,

Speed Dial, and Super Dial. Each phone number you

store can be up to 32 digits in length, and any names

you store can be up to 24 characters in length.

Press or from the Standby screen to access the

main menu.

Note! When accessing the PHONE LISTS menu, the maxi-

mum of 250 phone numbers that your phone can store

is based on each phone number containing 12 digits and

having a 20-character name stored with the phone num-

ber. Storing longer phone numbers and names reduces

the amount of memory available and the actual phone

numbers you can store. You can view the number of

phonebook positions available through the PHONE

LISTS menu.

Press or until the PHONE LISTS menu is

highlighted.

Press ^YESto open the PHONE LISTS menu.

Press or until the Add Entry submenu is high-

lighted.

Press ^YESto select the Add Entry submenu. The

next open phonebook position is shown in the dis-

play.

Storing a Phone Number and Name

There are three ways to store a phone number and name

in your phonebook:

Enter a name you want associated with this phone

number (refer to Entering Letters and Symbols in

this chapter).

• Store a phone number using the PHONE LISTS

menu.

Press to move the cursor to the Number:line in

the display.

• Store a phone number already shown in the display.

Enter the phone number you want to store.

• Store a phone number in secure memory.

Press ^YESto store the phone number. Stored I n

phonebookis shown in the display.

Using the Phonebook

To store a number in a specific position, press to

access the position field. Enter the number of the

phonebook position to which you want the entry

stored. Press ^YESto store the number in that particu-

lar position.

Note! Character sets vary according to language selection.

Storing a Phone Number Already Shown in the Display

Entering Letters and Symbols

With the phone number shown in the display, press

to access the main menu.

Press the appropriate key, 0-9, #, or * repeatedly until

the desired letter, character, or digit appears in the dis-

play. For example, to enter an A, press the numeric key 2

once. To enter a B, press the numeric key 2 twice.

Press or until the PHONE LISTS menu is

highlighted.

Press ^YESto open the PHONE LISTS menu.

Press this

Press until the Add Entry submenu is high-

lighted.

Space 1

A B C 2 À Á Â Ã Ç

D E F 3 È É Ê Ë

G H I 4 Í Î Ï

J K L 5

Press ^YESto select Add Entry. The phone number is

shown in the Number: line of the Add Entrydis-

play.

If you want to enter a name to be associated with this

phone number, enter it now on the Name:line.

M N O 6 Ñ Ó Ô Õ

P Q R S 7

Press ^YESto store the phone number in the phone-

book.

T U V 8 Ù Ú Û Ü

W X Y Z 9

Specifying a Phonebook Position

If you want to store a phone number in a specific phone-

book position, follow the previous steps for entering the

phone number and name, then press to move the cur-

sor to the Posi ti on:line. The phone number is

stored in the next available phonebook position unless

you enter a different phonebook position number.

Toggles between upper and lower-

case.

, . ? - ( ) ‘ “ ! ; : # @ & $ % + - * / | = <

Note! The * key toggles between upper and lowercase letters.

Using the Phonebook

Phone numbers stored in positions 1 through 9 can be

used with the Super Dial feature.

Press ^YESto open the PHONE LISTS menu.

Press or until the Recall Entry submenu is

highlighted.

All 1- and 2-digit phonebook positions can be used with

the Speed Dial feature.

Press ^YESto open the Recall Entry submenu. You

can recall a phone number in Phonebook by the

position number or by name.

Storing a Phone Number in Secure Memory

To recall by name, enter the letters of the name in

the Name:line. You can enter just a few letters of the

name or the complete name. If you enter just a few

letters, the phone finds the first name in the phone-

book that matches the letters you entered. Then you

can scroll through an alphabetical list of names to

find the one you are looking for.

A phone number stored in secure memory cannot be

recalled unless you enter the correct security code. To

store a phone number in secure memory, follow the pre-

viously described steps for entering a name and phone

number, then press and hold ^YES. You will be prompted

to enter your security code. If you enter the correct code,

the phone number is stored, and Saved i n secure

memory!appears in the display.

To search by the position number, press until the

cursor is on the Posi ti on:line and enter the num-

ber. The corresponding name and phone number are

shown in the display.

Recalling a Phone Number or Name

There are two ways you can do this:

Recalling a phone number using the PHONE

LISTS menu.

You can place a call to the phone number in the dis-

play by pressing ^YES.

Recalling a phone number from secure memory.

Recalling a Phone Number Using the PHONE LISTS

Press and hold

Recall Entry submenu.

to access the

Press or from the Standby screen to access the

main menu.

Press or until the PHONE LISTS menu is

highlighted.

Using the Phonebook

Recalling a Phone Number From Secure Memory

Erasing a Phone Number

Follow the previously described steps for opening

Recal l Entry from the PHONE LISTS menu.

Press or from the Standby screen to access the

main menu.

Press until the Posi ti on:line is highlighted.

Press or until the PHONE LISTS menu is

highlighted.

Enter the position of the phone number stored in

secure memory.

Press ^YES. The PHONE LISTS menu is shown in

the display.

Press ^YES. Securi ty Code:appears in the display.

Enter your security code.

Press or until the Recall Entry submenu is

highlighted.

If you enter the correct security code, the phone

number is shown in the display.

Press ^YESto select the Recall Entry submenu. The

phonebook appears in the display.

Editing a Phone Number

Press or until the phone number and name you

want to erase is shown in the display.

Recall the phone number. See Recalling a Phone

Number or Name from Your Phonebook in this

chapter.

Note! To search for a specific Phonebook entry, enter the first

letter of the name of the Phonebook entry and press

YES. This allows you to scroll alphabetically through the

entries for the character entered.

When the phone number is shown in the display,

press to move the cursor to the Number:line.

Press and hold ^CLR. Erase Posi ti on 000?

(where 000 is the phonebook position) is shown in

the display.

To add digits to the end of the phone number, just

enter the digits.

To replace digits, press ^CLRto erase the digits you

want to change and then enter the new digits.

Press ^YESto erase the phone number from the

phonebook. Posi ti on 000 i s erased!is

shown briefly in the display.

Press ^YESto store the altered phone number. The

message Posi ti on 00X i s occupi ed.

Repl ace?appears in the display (where 00Xis the

phonebook position of an existing entry).

Press ^YESagain to replace the phone number you

previously stored with the modified phone number.

Using the Phonebook

Press ^YESto select the Phone Group to which you

want to assign group options.

Phone Groups

Press or until Group Ring is highlighted.

Press ^YESto select Group Ring.

The Phone Groups submenu allows you to organize

your phonebook into groups by assigning individual

phone numbers to 1 of 10 Phone Groups. For each

Phone Group, you may define the group Members and

the group Ring Sound. If you receive a call from a par-

ticular group Member, the group Ring will sound.

Groups are also used in conjunction with the Screen

Calls submenu to allow you to select a group or groups

whose incoming calls will be screened so that the ringer

does not sound. The Screen Calls submenu is part of

the PROFILES menu. Refer to the Screen Calls section

in the “Menu Descriptions” chapter for more informa-

tion on Screen Calls.

Press or to scroll through the 25 user-selectable

ring types (including musical melody ring options).

The active ring type will be indicated by a filled radio

button ( ).

Press ^YESto select the Group Ring that you want to

assign to your Phone Group. The selected ring type

will ring only when you receive a call from one of the

group members.

Note! Your service provider must support Caller ID for this

feature to work properly.

Press ^NOto return to the previous screen.

Press ^CLRto return to the Standby screen.

Assigning Group Rings to Your Phone Groups

Press or from the Standby screen to access the

main menu.

Assigning Group Members to Your Phone Groups

Press or until the PHONE LISTS menu is

highlighted.

Press or from the Standby screen to access the

main menu.

Press ^YES. The PHONE LISTS menu is shown in

the display.

Press or until the PHONE LISTS menu is

highlighted.

Press or until the Phone Groups submenu is

highlighted.

Press ^YES. The PHONE LISTS menu is shown in

the display.

Press ^YESto select the Phone Groups submenu. The

list of Phone Groups appears in the display.

Press or until the Phone Groups submenu is

highlighted.

Press or until the Phone Group that you want

Press ^YESto select the Phone Groups submenu. The

list of Phone Groups appears in the display.

to select is highlighted.

Using the Phonebook

Press or until the Phone Group that you want

to select is highlighted.

Press ^YESto select the Phone Group to which you

want to assign group options.

Press or until Members is highlighted.

Press ^YESto select Members.

Press or to scroll through your list of phone-

book entries. Select a new member by highlighting

the desired member and pressing the * or # key. The

selected entry will be indicated by a filled checkbox

(

Press ^YESto save your changes.

Press ^NOto return to the previous screen.

Press ^CLRto return to the Standby screen.

Using the Phonebook

Message Services

Text messages and voice mail are the two types of mes-

Emergency Text Messages

sage services your Ericsson mobile phone can support.

The message services are provided by your service pro-

vider and subject to availability.

If your phone is turned On when it receives an emer-

gency message, your phone sounds two brief tones, and

a message appears in the display for a few seconds

prompting you to read the emergency message.

Emergency messages are always shown before urgent and

normal messages, regardless of the order in which the

messages were received.

Text Message Service

Your phone can store a maximum of 2KB of message

text in its memory. The messages can be classified by the

sender using one of the following message types: Nor-

mal, Urgent, and Emergency. A text message can also

contain one or more callback numbers - phone numbers

specified by the person leaving the message.

Urgent Text Messages

The message category assignment and the callback num-

ber capability are dependent on the system used by your

service provider.

If your phone is turned On when it receives an urgent

text message, your phone sounds a brief tone, and a mes-

sage appears in the display.

After a sender leaves a message with your service pro-

vider, the service provider transmits the message to your

phone. If your phone is On, it receives the message. If

your phone is Off, your service provider retains the mes-

sage and transmits it again later.

Normal Text Messages

If your phone is turned On when it receives a normal

text message, your phone sounds a brief tone, and a mes-

sage appears in the display.

When a message is received, your phone lets you skip,

review, save, or delete a text message.

Message Services

•

If you do not want to call the displayed callback

phone number, press ^NO, and resume reading the

actual message.

If there is an error in a callback phone number, you can

edit a callback phone number before you make the call.

Use the cursor, which appears at the left side of the sec-

ond line of the display, to edit a callback phone number.

When editing the phone number, you can:

Text Messages With Callback Numbers

Callback phone numbers are one or more phone num-

bers that are attached to or contained within a text mes-

sage. These phone numbers are specified by the person

sending the message.

• Move the cursor position by pressing and holding

one of the arrow keys.

• Insert a number at the cursor location by pressing a

number key.

• Delete the number at the cursor location by press-

ing ^CLR.

If you press ^YESwhile reading a message that contains a

callback phone number, a message appears in the display

prompting you to call the phone number.

• To dial the displayed phone number, press ^YES.

Text Message Memory

• To place a calling card call to the displayed phone

number, press and hold ^YES.

When the text message icon ( ) is flashing, your text

message memory is full. When the text message memory

is full and a new text message is received, the new text

message overwrites any old text messages that have not

been saved. If your phone’s text message memory is full,

• If you do not want to call the displayed phone

number, press ^NO, and resume reading the actual

message.

If there are two or more callback phone numbers in a

text message, the up and down arrows ( or ) appear

in the top right section of the display.

and all your messages have been saved ( ), you must

delete text messages from your phone’s memory before

you can receive new text messages.

• Scroll through the callback phone numbers by

pressing or . When the callback phone number

that you want to dial appears, press ^YES.

Message Services

Display the message line by line by pressing or

Display the message three lines at a time by pressing

and holding or

Status of Text Messages

A text message can have the following status:

• Unread ( ) - The text message has not been read.

Existing unread text messages will not be overwrit-

ten by a new message.

Reading Text Messages During a Call

When you receive a message during a call, your phone

sounds a brief tone and a message appears in the display

prompting you to read the text message (the ability to

receive a text message during a call is operator depen-

dent). To read the text message, do one of the following:

• Read (

) - The text message has been read, but

has not been saved. If your phone’s text message

memory is full, this message will be overwritten by

new text messages.

• Saved ( ) - The text message has been read and

saved. Existing saved text messages will not be over-

written by a new message. If your phone’s text mes-

• Press ^YESto display the incoming message

• Press ^NOto continue talking and have the message

treated as an unread message ( ).

sage memory is full, the text message icon ( ) will

flash. You must delete one or more saved messages

before your phone can receive a new text message.

Note! You cannot receive messages during a call if the text mes-

sage memory is full.

Reading Unread Text Messages

If you have messages that you have not read, a number

Reading Text Messages

and the text message icon appear in the display.

Reading a Text Message Immediately

Upon Receipt

To read the text messages:

When a text message is received by your phone, one or

more tones sound, and a message appears in the display

that notifies you that an emergency, urgent, or normal

message has been received.

Press or from the Standby screen to access the

main menu.

Press or until the MESSAGES menu is high-

lighted.

To read the text message:

Press ^YESto open the MESSAGES menu.

Press ^YESto read the message, or press NO to skip

the message. The message is skipped and is kept as

an unread message. It can be reviewed later.

Press or until the New Messages submenu is

highlighted.

Press ^YESto open the New Messages submenu.

Message Services

Press or until the new message is highlighted.

• To save the text message to memory, press and hold

YES. The message status is set to saved ( ).

Press ^YESto open the message. Once the message is

open, you can scroll through the message one line at

a time by pressing or . You can also scroll up or

down through the message three lines at a time by

• To delete the message, press and hold ^CLR. The

message will be deleted.

• To skip the current message and move to the next

message, press ¹. The message status is set to read

pressing and holding or

(

• To return to the previous message, press ³. The

message status is set to read ( ).

Reading Saved Text Messages

Press or from the Standby screen to access the

main menu.

Press or until the MESSAGES menu is high-

lighted.

Voice Mail Service

Press ^YESto open the MESSAGES menu.

Your phone can receive voice mail notification when it is

turned On. If your service provider transmits the notifi-

cation and your phone is turned Off, you will receive the

notification the next time you turn your phone On.

Press or until the Old Messages submenu is

highlighted.

Press ^YESto open the list of old messages.

Press or until the message you want to read is

highlighted.

Receiving Voice Mail Notification When

Your Phone Is In Standby

If your phone is turned On and is in standby when it

receives a voice mail notice, your phone sounds a brief

tone. If you have previously stored a voice mail access

number, a message similar to the one in this illustration

appears in the display.

Press ^YESto open the message.

With the message open, scroll through the message

one line at a time by pressing or . You can also

scroll up or down through the message three lines at

a time by pressing and holding or

Saving and Deleting Text Messages

After you have retrieved and read a text message, you can

do the following:

Message Services

To call the phone number shown, press ^YES. To make a

credit card call, press and hold ^YES. To return to the

Standby screen, press ^NO.

Note! Once you have stored your voice mail access number,

you can retrieve voice mail messages by pressing and

holding

If you have not stored an access number, you will see

Voi ce mai l access number not stored.

when you receive a voice mail notice. After this screen

has been displayed for five seconds, another screen

appears that gives you the opportunity to store an access

number. The phone number is stored as your default

voice mail access number.

Press or from the Standby screen to access the

main menu.

Press or until the MESSAGES menu is high-

lighted.

Press ^YESto open the MESSAGES menu.

To store a home-system access number, press or

until the Voice Mail submenu is highlighted.

After you store the phone number, a screen appears ask-

ing if you want to call that phone number.

Press ^YESto open the Voice Mail submenu.

Enter your voice mail phone number on the Num-

ber:line.

Receiving Voice Mail Notification During

a Call

If your phone receives a voice mail notice during a call, a

brief tone sounds and Voi ce mai l recei ved.

briefly appears in the display. After you end your call, a

Press ^YES. Sel ecti on Stored!appears in the

display.

Press ^NOtwice or press CLR to return to the Standby

screen.

number and the voice mail icon (

display.

) are shown in the

Retrieving Voice Mail

If there is a number beside the voice mail icon in the dis-

play, you have that many voice mail messages that you

have not heard.

Storing Your Voice Mail Number

It is a good idea to store your voice mail access num-

ber(s) so that a number automatically displays when you

receive a voice mail notice.

To listen to these voice mail messages:

Message Services

Press or from the Standby screen to access the

main menu.

Press until the MESSAGES menu is highlighted.

Press ^YESto open the MESSAGES menu.

Press or until the Voice Mail submenu is high-

lighted.

To dial your voice mail access number, move the

cursor to the Voice Mail submenu and press ^YES.

You can make a credit card call by pressing and

holding ^YES.

If you have not stored your voice mail number, enter

it now.

Press ^YESto call your selected access number.

Press and hold

to dial the

access number stored in the voice

mail menu.

Message Services

Data, Fax, and Internet Calls

Your Ericsson mobile phone contains a modem similar

Data Calls

to the modems you use to connect your computer to

your home or office telephone service. Rather than con-

necting to standard telephone lines, however, the

modem in your mobile phone allows you to connect

your computer to the mobile telephone system. In

places where mobile network operators provide the nec-

essary support, you can use your mobile phone to send

or receive faxes, upload or download data files, or access

the Internet. This chapter will assist you with setting up

your computer and phone to handle data, fax, and Inter-

net calls on the mobile network.

Data calls are placed to exchange computer files between

two computers. While the data connection is in place,

files can be transferred between the connected comput-

ers, according to the capabilities of the software in use.

When a data call is made, the connection will remain in

place until it is closed by one of the computers involved.

To make or receive data calls with your Ericsson mobile

phone, you must have a properly configured communi-

cations program running on your computer.

Fax Calls

Note! If digital data/fax/Internet service is not available, you

can purchase an analog modem card that is compatible

with your Ericsson mobile phone and use data/fax func-

tions on the available analog system.

Fax calls are placed to send fax messages. When a fax

message has been sent, your fax software or the originat-

ing fax machine will terminate the call. To make or

receive fax calls with your Ericsson mobile phone, you

must have a properly configured fax program running

on your computer.

Differences Between Data, Fax, and Internet

Calls

Internet Calls

Internet calls are placed to Internet Service Providers

(ISP) when you want to use e-mail or access websites on

the World Wide Web. To make Internet calls, you must

have an account with an ISP and a properly configured

Internet access program (browser) running on your

computer. When your software is installed and set up to

dial your ISP, calls can be made using the normal dialing

Your Ericsson mobile phone can handle data, fax, and

Internet calls, but each type of call requires correspond-

ing software that must be running on your computer.

Data, Fax, and Internet Calls

procedure. Once a connection to your ISP is established,

it will remain in place until you disconnect or until it is

automatically disconnected due to the degradation of

signal quality or due to inactivity.

Note! The availability of digital mobile voice service does not

necessarily imply that your mobile service operator sup-

ports digital data operation.

Note! Throughout this chapter, references to data/fax/internet

Setting Up Your Computer

will be referred to as simply data.

To operate properly with the modem in your Ericsson

mobile phone, make sure that your computer has the

following hardware and software:

Before You Start

Before setting up your phone for data operation, do the

following:

• A functional serial port

• An operating system that supports data access soft-

ware, such as Windows 95 or Windows 98

• Make sure that you have the required hardware and

software components.

• Appropriate fax (class 2.0), Internet access, or file

transfer software

Note! You must have an Ericsson DA 18 Phone Book Manager

Accessory Kit, which includes a serial interface cable, to

connect your Ericsson mobile phone to your computer.

The kit also includes a compact disc with the software

required to install your phone as a modem on your com-

puter.

Note! Class “2.0” is different from Class “2”.

Initial Setup

Successful first-time setup of your phone and computer

for data operation involves the following steps:

• Confirm that your mobile service provider supports

digital data services in your planned usage area. If

digital data service is not available, you can pur-

chase an analog modem card that is compatible

with your Ericsson mobile phone and use data

functions on the available analog system.

Connect Your Computer to Your Phone

Your Ericsson DA 18 Phone Book Manager Acces-

sory Kit contains a serial interface cable. The cable

has a plug on one end that matches the receptacle

on the bottom of your Ericsson mobile phone. The

other end of the cable has a 9-pin female connector

that matches the standard 9-pin serial interface port

• Verify that you have the necessary subscription.

Data, Fax, and Internet Calls

connector. Connect one end of the cable to your

Ericsson mobile phone and the other end to the

serial port on your computer.

Operation

Receiving Data and Fax Calls

When your phone and computer are properly set up,

your phone will go into Data/Fax profile ( )as soon as

your fax or file transfer software is started. You are then

ready to receive data and fax calls. If you do not see the

Data/Fax icon, refer to the Troubleshooting chapter.

Note! If you are trying to connect to a 25-pin serial interface

port on your computer, you will need an adapter. You

can purchase a 25-pin serial interface port adapter at

most computer supply stores.

Review the instructions from your mobile service pro-

vider that describe the procedures and rules for making

and receiving data calls in your area. If you are having

trouble receiving a data call, you may need to configure

your phone manually to receive a data call. To configure

your phone manually, do the following:

Install Your Modem Control Software (driver)

The modem control software (driver) that you need

to use your Ericsson mobile phone is available on

the compact disc included in your DA 18 Phone

Book Manager Accessory Kit. Refer to the Install-

ing Your Modem Driver From Your Compact Disc

section at the end of this chapter for help with

installing drivers for some operating systems. When

the appropriate driver is loaded, refer to the sections

on making and receiving data and fax calls later in

this chapter.

Set up your phone and computer as described

above.

Press or from the Standby screen to access the

main menu.

Press or until the PROFILES menu is high-

lighted.

Press ^YESto open the PROFILES menu.

Set up your data access software according to the

instructions supplied with it.

Press or until the NextCallType submenu is

highlighted.

Press ^YESto open the NextCallType submenu.

The current selection is indicated by a filled radio

button.

Press or

until the call type for the next call you

will receive is highlighted.

Data, Fax, and Internet Calls

Press ^YESto select the highlighted call type.

Your Ericsson mobile phone enables you to initiate voice

calls from Windows applications when connected to the

Ericsson Voice Call Dialer. This is particularly useful if

you have contact cards with phone numbers in a contact

management application. You can open a contact card,

click on the phone icon, and originate a call using your

Ericsson mobile phone. Then you simply pick up your

mobile phone and continue the call. The Ericsson Voice

Call Dialer is compatible with most contact manager

software packages. Refer to the “Manual Installation of

Your Modem Driver” or “Voice Call Dialer” section at

the end of this chapter for help with installing this driver

for some operating systems.

Sel ecti on stored!appears in the display. Your

phone is now configured to a specific type for your

next incoming call.

Note! The NextCallType setting will be reset to Voice call

after every incoming call. If you plan to receive several

data calls, reset the feature after you complete each call.

Making Data and Fax Calls

When your phone and computer are properly set up,

your phone will go into Data/Fax profile as soon as your

fax or file transfer software is started. You are then ready

to send a fax, or initiate data calls, as with any other

modem.

Disconnecting

Disconnect your Ericsson mobile phone from your com-

puter by disconnecting the cable from your phone and

the serial port from your computer. When your fax pro-

gram is stopped or when your interface cable is discon-

nected, your phone will exit Data/Fax profile and return

to the previously selected profile.

Review the instructions from your mobile service pro-

vider that describe the procedures and rules for making

and receiving data calls in your area.

Note! Your phone will remain in Data/Fax profile until your

phone cable is disconnected.

Note! To avoid unnecessary airtime charges, terminate your

data calls as soon as you have finished transferring files

by pressing the ^NOkey. Some software can be set to do

this automatically.

Use With Other Ericsson Accessories

Rapid or Travel Charger

To charge your phone’s battery with an Ericsson rapid or

travel charger during data operation, do the following:

Making Voice Calls While Connected to Your Computer

You can originate voice calls while your phone is in

Data/Fax profile and you are not on a data call. You can

receive voice calls if the NextCallType is set to Voice

Call.

Plug one end of the cable from your DA 18 Phone

Book Manager Accessory Kit into your phone.

Data, Fax, and Internet Calls

Plug the other end of the cable from your DA 18

Phone Book Manager Accessory Kit into the serial

port on your computer.

Plug the charger cable into the bottom of the con-

nector from your DA 18 Phone Book Manager

Accessory Kit cable.

Plug the charger cable into the bottom of the con-

nector from your DA 18 Phone Book Manager

Accessory Kit cable.

Plug your charger cable into the wall outlet.

Insert the phone into the front compartment of

your desktop charger.

Plug the charger cable into the wall outlet.

Note! When you remove your phone from your desktop

charger, your phone will exit Data/Fax profile and return

to the previously selected profile. To return your phone

to Data/Fax profile, place your phone in your desktop

charger and restart your data access software.

Achieving Best Performance

Charging your Battery

Both your Ericsson mobile phone and your laptop com-

puter batteries should be well-charged before starting

data operation. This will help you avoid interruptions

due to loss of power.

Desktop Charger

To charge your phone’s battery with an Ericsson desktop

charger during data operation, do the following:

You may charge your phone’s battery with an Ericsson

charger during data/fax operation as mentioned above.

Plug one end of the cable from your DA 18 Phone

Book Manager Accessory Kit into the back of your

desktop charger.

Signal Strength

It is important to maintain a good signal path between

the phone and the mobile telephone system when mak-

ing data calls. Signals will generally be stronger when the

phone is in an upright position. If you are indoors, your

Plug the other end of the cable from your DA 18

Phone Book Manager Accessory Kit into the serial

port on your computer.

Data, Fax, and Internet Calls

signal will generally be stronger when the phone is near a

window.

Installing Your Modem Driver From Your

Compact Disc

In a Vehicle

Windows 95

It is possible to receive data calls from your vehicle.

Operation from a moving vehicle may not be satisfac-

tory because data may be lost when your call is trans-

ferred from one mobile base station to another. Be sure

to give full attention to driving and pull off the road and

park before making or receiving calls, if driving condi-

tions so require.

Complete the following steps to install the appropriate

modem driver (INF file) on your computer if you are

running Windows 95:

Turn On your Ericsson mobile phone.

Connect one end of your serial cable to your Erics-

son mobile phone and the other end to your com-

puter’s serial port.

Transmission Disturbances

Restart your computer. Windows will autodetect

your Ericsson mobile phone. When your desktop

returns, insert the compact disc from your DA 18

Phone Book Manager Accessory Kit. One of the fol-

lowing screens will appear:

Brief interruptions of mobile telephone signals that

would not be bothersome during a voice call may cause

problems during data operation, depending upon the

error correction capabilities of the software being used.

Such interruptions are uncommon during stationary

operation, but can be caused by vehicles or people pass-

ing nearby, especially in areas of low signal strength. You

can use the signal strength indicator on your phone to

verify that you have a good signal path.

• New Hardware Found

When the New Hardware Found screen appears,

choose Driver from disk provided by your hardware

manufacturer and click OK.

At the Install from Disk screen, type D:\ in the box

then click OK (if your CD-ROM drive is not drive

D, type the correct CD-ROM drive designation).

• Update Device Driver Wizard

When the Update Device Driver Wizard appears,

click Next.

Once Windows has found the driver, click Finish.

Data, Fax, and Internet Calls

Note! If neither the New Hardware Found nor the Update

Device Driver Wizard screens appear, refer to the Man-

ual Installation Instructions at the end of this chapter.

Select Search for the best driver for your device

(recommended) and click Next.

Select the appropriate CD-ROM drive and click

Next.

When your desktop returns, verify that your modem

is properly installed. From the Start menu on your

Windows desktop, click on Settings, then Control

Panel. Double-click the Modems icon.

When Windows is now ready to install the best

driver for this device appears, click Next.

When Windows has finished installing the soft-

ware that your new hardware device requires

appears, click Finish.

When the Modem Properties screen appears, click

on the description of your modem and click the

Diagnostics tab. Note the COM port to which your

modem is assigned.

When your desktop returns, verify that your modem

is properly installed. From the Start menu on your

Windows desktop, click on Settings, then Control

Panel. Double-click the Modems icon.

Click OK to proceed.

Windows 98

Complete the following steps to install the INF file on

your computer if you are running Windows 98:

When the Modem Properties screen appears, click

on the description of your modem and click the

Diagnostics tab. Note the COM port to which your

modem is assigned.

Turn On your Ericsson mobile phone.

Click OK to proceed.

Connect one end of your serial cable to your Erics-

son mobile phone and the other end to your com-

puter’s serial port.

Manual Installation of Your Modem Driver or

Voice Call Dialer

Restart your computer. Windows will autodetect

your Ericsson mobile phone. When your desktop

returns, insert the compact disc from your DA 18

Phone Book Manager Accessory Kit.

Complete the following steps to manually install the

INF file on your computer if you are running Windows

95/98

When the Add New Hardware Wizard screen

appears, click Next.

Turn On your Ericsson mobile phone.

Note! If the Add New Hardware Wizard screen does not

appear, refer to the Manual Installation Instructions at

the end of this chapter.

Data, Fax, and Internet Calls

Connect one end of your serial cable to your Erics-

son mobile phone and the other end to your com-

puter’s serial port.

Settings, then Control Panel. Double-click the

Modems icon.

When the Modem Properties screen appears, click

on the description of your modem and click the

Diagnostics tab. Note the COM port to which your

modem is assigned.

From the Start menu on your Windows desktop,

click on Settings, then Control Panel. Double-click

the Modems icon.

Click Add.

Click OK to proceed.

At the Install New Modem screen, select Other.

Click Next.

Troubleshooting

At the next Install New Modem screen, select Don’t

run Hardware Installation Wizard then click Next.

You cannot set up or maintain a data/fax session.

At the next Install New Modem screen, select Don’t

detect my modem, I will select it from a list then

click Next.

This will occur if you are inadvertently originating a

voice call when attempting a data/fax call or if the

data/fax profile icon does not appear on your

phone’s display after you attempt to dial or answer a

data/fax call. To correct the problem, do the follow-

ing:

a From the Start menu on your Windows desktop,

click on Settings, then Control Panel.

b Double-click the Modems icon.

c Select the General tab.

d Select Ericsson TDMA Data/Fax Modem from

the pull-down list.

e Click Properties.

f Click General. Make sure that the maximum

speed is set to 19200.

g Select the Connection tab.

At the next Install New Modem screen, click on

Have Disk.

At the Install from Disk screen, select D:\ at Copy

from Manufacturer’s Disk (if your CD-ROM drive

is not drive D, type the correct CD-ROM drive des-

ignation).

At the Install New Modem screen, select Ericsson

Voice Call Dialer, then click Next.

Select the COM port to which your Ericsson mobile

phone is connected and click Next.

When Your modem has been set up successfully

appears, click Finish.

h Click Advanced.

i In the Extra settings box, type the following:

+COS=4,1,2,0; +ES=1,0,1; +DS=0,0,512,6;

When your desktop returns, verify that your modem

is properly installed. From the Start menu, click on

Data, Fax, and Internet Calls

j Click OK to return to the Connection tab.

k Click OK to return to Modem Properties.

l Click Close.

the following:

a Verify that your cellular service provider supports

the over-the-air Privacy service for data/fax calls.

b From the Start menu on your Windows desktop,

click on Settings, then Control Panel.

c Double-click the Modems icon.

d Select the General tab.

e Select Ericsson TDMA Data/Fax Modem from

the pull-down list.

f Click Properties.

Note! If you are using an application that supplies its own box

for entering extra settings, then type the following com-

mand string into that box as well:

+COS=4,1,2,0; +ES=1,0,1; +DS=0,0,512,6;

You cannot originate a voice call.

a From the Start menu on your Windows desktop,

click on Settings, then Control Panel.

b Double-click the Modems icon.

c Select the General tab.

g Select the General tab.

h Select the Connection tab.

i Click on Advanced.

d Select Ericsson Voice Call Dialer from the pull-

down list.

j In the Extra settings box, type the following:

+COS=4,1,2,1;

e Click Properties.

f Select the Connection tab.

g Click Advanced.

k Click OK to return to the Connection tab.

l Click OK to return to Modem Properties.

m Click Close.

h Type the following in the Extra Settings box of

the the Advanced Connection Settings window:

*ERVNOK=1

i Click OK to return to the Connection tab.

j Click OK to return to Modem Properties.

k Click Close.

Note! If you are using an application that supplies its own box

for entering extra settings, then type the following com-

mand string into that box as well:

+COS=4,1,2,1; into that box as well.

You are having trouble initiating data/fax calls

from your computer.

Note! If you are using an application that supplies its own box

for entering extra settings, then type the following com-

mand string into that box as well:

Check to see if your COM ports are occupied. If so,

you must temporarily disable the software applica-

tions that are using the COM ports.

+COS=4,1,2,0; +ES=1,0,1; +DS=0,0,512,6;

You cannot enable over-the-air Privacy for data/fax

calls.

To enable over-the-air Privacy for data/fax calls, do

Data, Fax, and Internet Calls

Problems You Can Solve

Displayed Messages and Explanations

Problems and Possible Solutions

The phone does not turn On.

Charge or replace the battery.

The signal is too weak to make a call. Try again

when the signal strength is one bar or stronger.

The phone is not ringing when a call is received.

Check the SOUNDS menu to make sure the phone

is not set for Phone Silent. If your phone is not set

for Phone Silent, check Call Screening to make

sure that Call Screening has not been selected for a

particular Phone Group.

Your phone is searching for a mobile service pro-

vider.

The phone becomes warm during long calls.

This is not a problem. Because of its size, the phone

may feel slightly warm during extended calls.

You called a number for which you have set call

restrictions.

The battery does not seem to charge to full capac-

ity.

Condition the battery by fully discharging and

charging it three times. Or, if your phone came with

a desktop charger, use the conditioning function on

the desktop charger to condition the battery.

You entered an incorrect security code. Enter the

correct security code.

The battery power is low. The indicator light will

flash red. When the phone shuts itself off, replace

the battery with a fully charged one, or use an alter-

nate power source, such as a travel charger.

Calls are being dropped.

You are probably in a geographic area with minimal

service. Wait until the signal strength indicator in

your phone's display shows a high relative signal

strength (more bars) before trying a call. Make note

of geographic locations where calls are dropped and

contact your service provider.

Your text message memory is full. Erase some

stored messages to free up memory for new mes-

sages.

Problems You Can Solve

The signal strength varies.

This is a common occurrence. Transmitters are set

in geographic areas and coverage is not 100% all of

the time. Signal strength varies as you travel between

cells.

If you need additional information or assistance, or would like to

purchase Original Ericsson Accessories: in the U.S.A., call

1-800-ERICSSON (374-2776).

If you need to speak with someone in Customer Care, call the Customer

Care Center from the following locations:

• In North America, call 1-800-ERICSSON

• In Latin America, call (305) 755-6789

• Elsewhere, call 1-919-472-7908

Problems You Can Solve

Index

Caller Number Identification, 32

Calling Cards, 34

Default Card, 34

Setting Up Cards, 32

Calls

Data Select, 44

Access Tone, 42

Accessories, 68

Answer Option, 36

Antenna, 16

Data/Fax/Internet Calls

Achieving Best Performance, 61

Disturbances, 62

In Vehicles, 62

Auto Area, 36

Auto Prefix, 36

Auto Retry, 23, 37

Answering, 24

Data, 57

Emergency, 26

Fax, 57

International, 27

Internet, 57

Making, 23

Initial Setup, 58

Making, 60

Operation, 59

Preparing For, 58

Receiving, 59

Back Light, 39

Battery Information

Battery Location, 16

Charge-Only Mode, 10

Charging, 10

Diagram of Phone, 16

Digit Keys, 19

Display

Muting, 24

Chargers , 11

Diagram, 16

Indicators, 17

Desktop, 12

Conditioning, 13

Connecting, 10

Diagram, 16

Low Power, 27

Removing, 10

Rapid, 11

Travel, 12

Display Language, 22, 39

Document Conventions, 1

Down Arrow Key, 16, 18

CLR Key, 16, 19

Connectors

Charging, 16

Handsfree, 16

Contrast, 39

Earpiece, 16

Earpiece Volume, 19, 24

Emergency Calls, 26

Erasing Messages, 35

Ericsson Phone

Diagram, 16

Call Manager Menu, 36

Call Totals, 36

Caller ID, 27

Customer Care, 68

Caller Identification, 27

Data Calls, 57

Index

Display Icons, 17

Display Messages, 20

Highlights, 15

Minute Alert, 42

Modem Drivers, 63

Mute

Keypad, 16

Keyp ad Lock , 38

Illustration , 16

Key Functions, 18

Learning About, 15

Microphone, 19

Ringer, 19

Language, 39

Error Messages, 67

Last Call, 36

Last Number Dialed, 25

Letters, Entering, 46

Lock Dial, 37

Lock Receive, 38

Logs, 32

New Messages, 35

Next Call Type, 44

NO key, 16, 18

Fax Calls, 57

Features, 15

Flip, 19

Lower Side Key, 16, 19

Old Messages, 35

Getting Started, 9

Greeting, 39

Group Rings, 49

Menu Overview, 30

Menus, 29

Pause Dialing, 25

Phone Display Icons, 17

Phone Groups

Accessing, 31

Call Manager, 35

Messages, 35

Assigning Group Members, 49

Group Rings, 49

Submenu, 32

Icons, 17

Incoming Log, 32

Indicator Light, 17

Indicators

Display Icons, 17

Display Indicators, 17

Indicator Light, 16, 17

International Calls, 27

Internet Calls, 57

Opening, 29

Phone Lists, 31

Phonebook, 31

Resetting, 44

Settings, 29

Phone Lists

Adding Entries, 31

Incoming Log, 32

Menu, 31

Sounds, 41

Phone Groups, 32

Recalling Entries, 31

Phonebook

Message Alert, 43

Message Services, 51

Messages Menu, 35

Editing Entries, 48

Index

Ente ring L etters/Symbols , 46

Erasing Entries, 48

Recalling Names/Numbers, 47

Secure Memory, 47

Specifying Positions, 46

Storing Names/Numbers, 45

Gr eetin g , 39

Keypad Lock, 38

Menu, 38

Power On Lock, 38

Ring Sound, 22

Ring Volume, 23

System Select, 39

Time/Date, 39

Voice Privacy, 39

Find Network, 40

Home Only, 40

Private Network, 40

Technical Support, 68

Text Message Service

Callback Numbers, 52

Emergency Messages, 51

Reading Text Messages, 53

Saving/Deleting Text Messages, 54

Status of Messages, 53

Urgent Messages, 51

Time/Date, 39

Power, 38

Power On Lock, 38

Power On/Off, 16, 18, 22

Problems You Can Solve, 67

Profiles Menu, 43

Setup

Getting Started, 15

Sounds

Access Tone, 42

Ear Volume, 42

Earpiece Volume, 19

Key Sound, 42

Redialing, 25

Reset Menu, 44

Reset Pr ofile, 44

Ring Sound, 22

Ring Volume, 23

Tone Send, 42

Troubleshooting, 67

Menu , 41

Message Alert, 43

Minute Alert, 42

Phone Silent, 41

Ring Sound, 42

Ring Volume, 42

Tone Send, 42

Up Arrow Key, 16, 18

Upper Side Key, 16, 19

Screen Calls, 43

Security Code, 27, 38

Setting

Vibrate, 42

Security Code, 38

Settings

Vibrating Option, 42

Speed Dial, 37

Stop Dialing, 25

Super Dial, 37

Symbols, 46

Voice Mail

Retrieving, 55

Storing Number, 55

Submenu, 35

Voice Privacy, 39

Volume Control, 19

Back Light, 39

Contrast, 39

Display Language, 22

Ear Volume, 24

System Select, 39

Index

YES Key, 16, 18

Index

T18d/T18ds

Select a highlighted

menu setting

During Calls

Decrease ear volume Press lower side key

Increase ear volume Press upper side key

Access main menu

Mute your voice

during a call

Mute the ringer when NO or either side key

a call is received

Work with Phone Lists

Add an entry

Recall an entry

Update Phone Groups

Work with Messages

Read new text

messages

Read old text

messages

Press YES

Making and Answering Calls

Turn Phone On/Off Press and hold NO

Answer a Call

End a Call

*Open flip or press YES

*Close flip or press NO

*Flip must be enabled: or

3 3

Press or

Press and hold CLR

Call the number

shown in the

display

Press YES

Activate Speed Dial or

Activate Super Dial or

3 7

3 8

Access the

outgoing call log

Press YES

1 1

1 2

1 3

Dial the number

selected from the

outgoing call log

Press YES (again)

Erase the last digit Press CLR

or letter entered

Erase all digits or Press and hold CLR

letters entered

While in Menu Mode

Go back one level Press NO

Return to Standby Press CLR

2 1

2 2

2 3

Erase text messages

Save the text message Press and hold YES

you are reading

Scroll through

menu or menu

settings

Press or

Store your voice mail

access number

Quick access to call Press and hold 1

voice mail number

2 5

AE/LZT 123 4751 R3

Your Phone’s Display

Contrast

Back Light

Key Shortcuts

Access PHONE LISTS

Access MESSAGES menu

Access CALL MANAGER

Access SETTINGS menu

Access SOUNDS menu

Access PROFILES menu

Access Profile Activation

4 9

4 8

4 5

Language

Your Phone’s Sounds

Phone Silent

Ring Sound

Ring Volume

Vibrate

5 1

5 2

5 3

5 4

5 5

5 6

Press and hold

Ear Volume

Key Sound

Recall phone numbers

Press and hold

Your Phone’s Security

Lock Dial

Lock Receive

Security Code

Power-On Lock

Keypad Lock

Reset Profile

Reset Menu

6 5

6 6

3 9

3 0

4 1

4 2

4 3

Making Emergency Calls

You will be able to dial 911 (or your

emergency number) at any time, regardless of

any call restrictions that you have set.

Making Calling Card Calls

Enter the number you want to call. Press

and hold YES until your calling card number

appears in the display. Release YES after the

number is displayed.

Visit us on the web at: http://mobile.ericsson.com

The T18d/T18ds Menu

You can quickly access several com-

monly used menus by pressing or

. The menus are organized in a cir-

cle. Quickly access menus and set-

tings using the numbers that appear

next to each menu and setting. For

example, access the Ring Volume

submenu by pressing or and

then entering 5 3.

1. Activate

2. Screen Calls

3. Next Call Type

4. Reset Profile

5. Reset Menu

1. Phone Silent

2. Ring Sound

3. Ring Volume

4. Vibrate

5. Ear Volume

6. Key Sound

7. Access Tone

8. Minute Alert

9. Tone Send

0. Message Alert

1. Add Entry

2. Recall Entry

3. Phone Groups

4. Outgoing Log

5. Incoming Log

6. Calling Card 1

7. Calling Card 2

8. Default Card

9. Phone Number

0. Memory Used

1. Security Code

2. Power-On Lock

3. Keypad Lock

4. Time/Date

5. Language

6. Greeting

1. New Messages

2. Old Messages

3. Erase All

4. Memory Used

5. Voice Mail

7. Voice Privacy

8. Back Light

9. Contrast

0. System Select

1. Last Call

2. Call Totals

3. Answer Option

4. Auto Area

5. Auto Prefix

6. Auto Retry

7. Speed Dial

8. Super Dial

9. Lock Dial

0. Lock Receive

MTD 244 647C000 User Manual
Motorola 6803578F42 User Manual
LG Electronics VX8360 User Manual
Hamilton Beach 44274 User Manual
GT Mobile I801 User Manual
Elektra Beckum Computer Accessories NM20600A A User Manual
Disney DCR4500 P User Manual
Cecilware Coffee Brewers User Manual
Aluratek AUCR200 User Manual
ABB ACH480 User Manual