Operator stations
User Manual Version 2.00
POLARIS Panel PC 19.1" and Panel PC 15"
Type 17-71V1-....
Download from Www.Somanuals.com. All Manuals Search And Download.
USER MANUAL
POLARIS
Panel PC 19.1'' / Panel PC 15''
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 5 of 46
Contents
1.
2.
System description..................................................................................................................................... 7
Technical data POLARIS Panel PC...................................................................................................... 10
2.1
2.2
2.3
2.4
2.5
2.6
2.6.1
2.6.2
2.6.3
Characteristics data Panel PC 19.1'' und Panel PC 15''............................................................. 10
General data .............................................................................................................................. 10
Characteristics data Panel PC 19.1''.......................................................................................... 11
Characteristics data Panel PC 15''............................................................................................. 12
Characteristics data keyboard.................................................................................................... 13
Characteristics data mouse, trackball and touchpad.................................................................. 14
Mouse........................................................................................................................................ 14
Trackball .................................................................................................................................... 14
Touchpad................................................................................................................................... 14
3.
Terminal assignment................................................................................................................................ 16
3.1
3.2
3.3
3.3.1
3.3.2
3.3.3
3.3.4
3.3.5
3.3.6
Terminal assignment Ex e.......................................................................................................... 16
Terminal assignment Ex i........................................................................................................... 17
Electrical installation .................................................................................................................. 17
EMC notes................................................................................................................................. 17
Interference suppression............................................................................................................ 18
Shielding.................................................................................................................................... 18
Connection of shielding.............................................................................................................. 19
Examples of how shielding can be connected ........................................................................... 19
Connection of Ethernet cable to POLARIS Panel PCs .............................................................. 20
4.
5.
Overview of connection diagram ............................................................................................................ 21
4.1 Possible connection................................................................................................................... 21
Notes on the installation of POLARIS Panel PC .................................................................................... 22
5.1
5.1.1
5.2
5.2.1
5.2.2
5.3
5.3.1
5.4
5.4.1
5.4.2
5.4.3
5.4.4
5.4.5
Safety instructions...................................................................................................................... 22
Safety-relevant notice ................................................................................................................ 22
Maintenance .............................................................................................................................. 22
Servicing.................................................................................................................................... 22
Inspection .................................................................................................................................. 22
Installation options ..................................................................................................................... 23
Cable glands / Conduits............................................................................................................. 23
Mechanical installation............................................................................................................... 24
Recommended enclosure .......................................................................................................... 24
Special installation instructions .................................................................................................. 24
Cover Ex i terminal box.............................................................................................................. 24
General data .............................................................................................................................. 25
Installation guidelines................................................................................................................. 26
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 6 of 46
Contents
6.
Connection cables (pin assignment) ...................................................................................................... 27
6.1
6.2
6.3
6.4
RS 422 interface ........................................................................................................................ 27
RS 485 interface ........................................................................................................................ 28
PROFIBUS-DP interface............................................................................................................ 29
Supply module for BCS 302ex .................................................................................................... 30
7.
Installation additional components......................................................................................................... 31
7.1
7.2
7.3
7.4
Connection of Ex i keyboard to the POLARIS Panel PC............................................................ 31
Connection of BARTEC USB Ex i memory stick........................................................................ 31
Connection of USB CD Rom drive............................................................................................. 31
Connection of USB mouse and USB keyboard.......................................................................... 31
8.
9.
Configuration of POLARIS Panel PCs................................................................................................. 32
8.1
8.2
8.2.1
Network (Ethernet) setup........................................................................................................... 32
Calibration of touch screen ........................................................................................................ 35
Touch screen signs and symbols in notification area................................................................. 36
Accessories............................................................................................................................................... 37
Appendix
EC-Declaration of Conformity ................................................................................................ 39
EG-Baumusterprüfbescheinigung.......................................................................................... 40
EC-TYPE-EXAMINATION CERTIFICATE (Translation).......................................................... 43
Additional information............................................................................................................. 46
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 7 of 46
1. System description
POLARIS Panel PCs are the extension of the proven and tested BAT family. The equipment is characterised by its
excellent brilliance and its very wide reading angle. The screen of the POLARIS Panel PCs 19.1" is a TFT-Display with
SXGA resolution (1,280 x 1,024 pixels) and the POLARIS Panel PC 15" with XGA resolution (1,024 x 768 pixels). The
®
®
Panel PCs are based on a fast Intel Pentium M processor and include all standard interfaces.
The 19.1" and 15" Panel PCs are the highlights of the POLARIS series. These devices are perfectly suitable for controlling
complex systems such as chemical and pharmaceutical production lines.
Due to the innovative POLARIS series, the familiar comfort of PCs is now also available in hazardous areas, in zones 1 + 2
as well as in 21 + 22.
POLARIS Panel PC 15"
POLARIS Panel PC 19.1''
An intrinsically safe keyboard and mouse, trackball and touchpad are available for front panel installation. Optional a touch
screen (intrinsically safe) is also possible, providing absolute maximum operating convenience.
Trackball
Keyboard
Touchpad
Mouse
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 8 of 46
The front panel fitting permits easy installation. On request, the devices can also be supplied in the form of complete system
solutions in a stainless steel enclosure for wall, floor or ceiling mounted installation.
Examples:
POLARIS Panel PC with Touch-Screen
By means of WLAN technology, individual computers or network equipment such as printers or DSL access points can be
connected to an existing local network (LAN) wirelessly or local networks can be set up completely wirelessly. Powerful
visualisation and operation of processes is now possible directly on site. Wired electrical connections are established via a
terminal box in type of protection “e” (increased safety).
An intrinsically safe USB interface for a USB Ex i memory stick allows for easy transmission of equipment configuration.
USB Ex i memory stick
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 9 of 46
®
Windows XP Professional is preinstalled in Panel PCs as a standard. Thus various software packages can be run on
Panel PCs such as customer-specific software or other standard visualisation software. Of course, the operator can also
work with the BARTEC programming package “BMS Graf pro”.
enders.
e
h
tw
e
n
ä
h
c
d
e
li
n
s
i
B
t
g
A
R
e
li
T
E
M
C
O
R
f
e
t
u
i
d
n
g
g
n
ü
u
o
m
w
r
e
BMS Graf pro – Version V6.x.x.x
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 10 of 46
2. Technical data POLARIS Panel PC
2.1
Characteristics data Panel PC 19.1'' und Panel PC 15''
Type
:
:
17-71V2-.0../.000
II 2G Ex e q [ib] IIC T4
Ex protection type
II 2D tD A21 T 80°C IP 6X (front side)
IBExU05ATEX1117 X
Certification
:
2.2
General data
Construction
:
:
Front panel fitting
System solution in stainless steel enclosure for
wall, floor or ceiling mounting
Computer capacity
®
Pentium M Processor, 1.1 GHz
Graphic memory 32 MB
512 MB RAM, 20 GB memory
Operating system
Interface
:
:
®
Windows XP Embedded (pre-installed)
Open platform for customer-specific visualisation software,
e. g. ProTool, WIN CC flexible, etc.
Ethernet 10BaseT
RS422/RS485 or PROFIBUS-DP
USB for Ex i memory stick
2 x PS/2 intrinsically for intrinically safe keyboard and mouse
Optional interface modules
:
Supply module for hand-held scanner
WLAN
USB-Touch
additional USB
AC 230 V ± 10 %, 50 Hz to 60 Hz
70 W
Power supply
:
:
:
Max. power take-up Pmax
Admissible ambient temperature
Storage
-20 °C to +50 °C
Operation
Front
0 °C to +50 °C
Material
:
:
Polyester foil on aluminium sheet
Sheet steel
Rear side
IP 65 (front side)
Protection class
Below +10 °C the unit has to be heated in order to guarantee the lifetime of the backlight illumination.
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 11 of 46
2.3
Characteristics data Panel PC 19.1''
Display
:
19.1" TFT graphic display
SXGA resolution 1,280 x 1,024 pixels
16.7 million colours
Brightness 250 cd/m2
Visible area approx. 380 x 305 mm
Contrast 700:1
Antireflection coating glass pane
Optional touch screen
Dimensions
:
:
:
:
498 mm x 400.5 mm x approx. 135 mm
484 mm x 386.5 mm ± 0.5 mm
approx. 33 kg
Wall cut-out
Weight
Backlight illumination
CFL technology
Service-life approx. 40,000 hours at +25 °C
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 12 of 46
2.4
Characteristics data Panel PC 15''
Display
:
15" TFT graphic display
XGA resolution 1,024 x 768 pixels
262,144 colours
Brightness 350 cd/m2
Visible area approx. 304 x 228 mm
Contrast 400:1
Antireflection coating glass pane
Optional touch screen
Dimensions
:
:
:
:
411 mm x 332 mm x approx. 135 mm
394.5 mm x 315.5 mm ± 0.5 mm
approx. 23 kg
Wall cut-out
Weight
Backlight illumination
CFL technology
Service-life approx. 50,000 hours at +25 °C
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 13 of 46
2.5
Characteristics data keyboard
Type
:
:
17-71VZ-40../....
II 2G Ex ib IIC T4
Ex protection type
II 2D tD A21 T 80°C IP 6X (front side)
IBExU05ATEX1117 X
Certification
Keyboard
:
:
:
Front panel fitting
Dimensions
420 mm x 170 mm (weight x height)
Installation depth
Wall cut-out
Weight
:
:
:
18 mm
390 mm x 140 mm
approx. 700 g
Dimensions and wall cut-out for keyboard
400.00 mm
300.00 mm
100.00 mm
390.00 mm
3.30 mm
420.00 mm
Hole diameter: 3.3 mm
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 14 of 46
2.6
Characteristics data mouse, trackball and touchpad
2.6.1
Mouse
Ex protection type
:
II 2G Ex ib IIC T4
IBExU05ATEX1117 X
17-71VZ-10../....
Certification
Type
:
:
:
:
:
:
Dimensions
Wall-cut out
Installation depth
Weight
130 mm x 170 mm (weight x height)
100 mm x 140 mm
15 mm
approx. 270 g
2.6.2
Trackball
Ex protection type
:
II 2G Ex ib IIC T4
II 2D tD A21 T 80°C IP 6X (front side)
IBExU05ATEX1117 X
17-71VZ-20../….
Certification
Type
:
:
:
:
:
:
Dimensions
Wall-cut out
Installation depth
Weight
130 mm x 170 mm (weight x height)
100 mm x 140 mm
43 mm
approx. 500 g
2.6.3
Touchpad
Ex protection type
:
II 2G Ex ib IIC T4
IBExU05ATEX1117 X
17-71VZ-30../….
Certification
Type
:
:
:
:
:
:
Dimensions
Wall-cut out
Installation depth
Weight
130 mm x 170 mm (weight x height)
100 mm x 140 mm
15 mm
approx. 250 g
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 15 of 46
Dimensions and wall cut-out for mouse, trackball and touchpad
110.00 mm
100.00 mm
3.30 mm
130.00 mm
Hole diameter: 3.3 mm
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 16 of 46
3. Terminal assignment
3.1
Terminal assignment Ex e
Terminal Interface
Signal
Remarks
X10
X11
X12
Supply
Supply
Supply
L
N
PE
AC 230 V ± 10 %
Neutral
Protective earth
Configuration of RS422 interface of Ethernet 10BaseT
X13
X14
X15
X16
Ethernet
Ethernet
Ethernet
Ethernet
RxD +
RxD -
TxD +
TxD -
10BaseT Receive
10BaseT Receive
10BaseT Transmit positive
10BaseT Transmit negative
positive
negative
Configuration of RS422 interface
X17
Jumper between terminal X17 and X18 for
activation of the terminator resistors
Termination On/Off
X18
X19
X20
X21
X22
X23
X24
X25
X26
Interface COM 1
Interface COM 1
Interface COM 1
Interface COM 1
Interface COM 1
Interface COM 1
Interface COM 1
Interface COM 1
TxD B (TxD+)
TxD A (TxD-)
RxD B (RxD+)
RxD A (RxD-)
TxD B (TxD+)
TxD A (TxD-)
RxD B (RxD+)
RxD A (RxD-)
Transmission cable
Transmission cable
Receiving cable
Input
Input
Input
Input
Output
Output
Output
Output
Receiving cable
Transmission cable
Transmission cable
Receiving cable
Receiving cable
When interface used with PROFIBUS-DP interface in place of RS422:
Configuration of PROFIBUS-DP interface
Terminal Interface
Signal
Remarks
X17
X18
X19
X20
X21
X22
X23
X24
X25
X26
GND PROFIBUS
not connected
PE
N.C.
Additional ground
Interface COM 1
Interface COM 1
Interface COM 1
Interface COM 1
Interface COM 1
Interface COM 1
Interface COM 1
Interface COM 1
Termination B2
Termination A2
Termination B1
Termination A1
Out B
Out A
In B
In A
Bridge for terminating network (B1-B2)
Bridge for terminating network (A1-A2)
Bridge for terminating network (B1-B2)
Bridge for terminating network (A1-A2)
Signal B
Signal A
Signal B
Signal A
Output
Output
Input
Input
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 17 of 46
3.2
Terminal assignment Ex i
Terminal Interface
Colour
Signal
Remarks
Scanner connection
(optional)
X1
X2
X3
Hand-held scanner
Supply
+UB
Supply voltage +5 V
RxD-I
GND
Data input RS232 signal
Supply
Mass connected to protective earth
PS/2 interface for input devices
X4
X5
X6
X7
X8
X9
PS2
PS2
PS2
PS2
PS2
PS2
WH/BN
GN/YE
PK
VCC
Supply voltage
GND
Mass connected to protective earth
Keyboard clock signal
Keyboard data signal
KB_CLK
KB_DATA
MS_CLK
MS_DATA
GR
BL
Mouse
Mouse
clock signal
data signal
RD
3.3
Electrical installation
3.3.1
EMC notes
This device is class A equipment and may cause interference in domestic
electrical equipment. If this occurs, the installer of the device may be required to
implement appropriate counter measures.
ꢀ
All connection cables must be shielded. This applies both to data lines and to other cables.
The data cables must be twisted in pairs. Example: 2 x 2 x 0.75 mm² LIYCY TP.
If possible, cables for power supply and data must be laid separately.
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 18 of 46
3.3.2
Interference suppression
Certain basic measures must be taken to ensure freedom from interference when the POLARIS Panel PC are installed:
■
Interference voltages injected into the unit via power and signal cables and static charges
caused by contact are to be conducted to earth (e.g. grounding screw terminal fixed to the back
of the unit). This earthing point must be connected to the PE conductor by means of the
shortest possible low resistance copper conductor or must be integrated in the equipotential
bonding. If this point is not observed, the measures taken to suppress interference and
preclude damage to the device effectively will be impaired.
■
The installation point should be as far as possible away from fields of electromagnetic
interference. This is especially important if there are frequency converters in the vicinity. Under
certain circumstances it will be advisable to set up partitions to isolate the POLARIS Panel PC
from interference.
■
■
If inductive unit are fitted in the vicinity (e.g. contactor, relay or solenoid coils), especially if they
are powered from the same source, protective circuits (e.g. RC elements) must be installed.
Power supply and data cables must be laid so as to avoid interference. This can, for example,
be achieved by avoiding laying such cables in close proximity to high current carrying cables.
3.3.3
Shielding
■
Only cables with braided shielding should be used
(recommended cover density > 80%).
■
■
Sheet shielding should not be used.
Generally, connection of the shielding at both ends results in optimum damping of all
interference frequencies.
■
Connection of the shielding at one side only may be more advisable if a difference in
potential exists and no equipotential bonding cable can be laid.
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 19 of 46
3.3.4
Connection of shielding
■
■
■
A low impedance connection to the circuit protective conductor is important to ensure a low
current fault path.
When sub-D connectors are used, the shielding should always be connected to the metal
casing of the sub-D plug.
The plug casing of some controllers is not always well connected to earth. In such cases it
may prove advantageous to insulate the shielding from the sub-D plug of the controller and
connect it directly with the protective earth conductor by means of a cable that should be
kept as short as possible (0.75 mm² …1.5 mm²).
3.3.5
Examples of how shielding can be connected
Connection of shielding at both ends of the cables linking the controller and POLARIS Panel PC:
Shielding
POLARIS
Panel PC
Controller
Earth
Generally, connection of the shielding at both ends results in optimum damping of all interference frequencies. This method
is to be recommended when there is good equipotential bonding between the individual units. In such cases it is possible to
make use of the controller’s voltage supply cable even if this is not electrically isolated.
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 20 of 46
Connection of shielding at one end only of the cables linking the controller and Panel PC:
Shielding
POLARIS
Panel PC
Controller
Difference in potential
Earth
Connection of the shielding at one end only is recommended when there is inadequate equipotential bonding, or none at all.
In such cases an electrically isolated power supply unit must be used.
If the shielding were connected at both ends, the equipotential bonding current would flow to point A and this must be
avoided at all costs, as the resultant interference pulses could be passed on to the devices via the data cable. When
shielding is connected at one end only it must be on the side that has the lowest resistance earth connection.
Before the equipment goes into service the directions from the controller manufacturer regarding proper assembly and
operation must be read carefully. They should then be applied taking full account of the recommendations we make here.
3.3.6
Connection of Ethernet cable to POLARIS Panel PCs
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 21 of 46
4. Overview of connection diagram
4.1
Possible connection
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 22 of 46
5. Notes on the installation of POLARIS Panel PC
5.1
Safety instructions
For electrical appliances, the appropriate regulations for setting-up and operation have to be observed
(e.g. directive 1999/92/EC, directive 94/9EC, BetrSichV and national regulations/acts, IEC/EN 60 079-14 and VDE 0100).
The operator of an electrical appliance in an area where there is an explosion hazard has to maintain the resources in a
proper condition, operate them correctly, monitor them and carry out maintenance and repair work (BetrSichV and national
regulations/acts and EN 60 079-14).
Where the IP rating is concerned, only original replacement parts may be used (e.g. lid seal).
The unit may be opened only in the manufacturer's works!
The unit is factory sealed! Do not open!
5.1.1
Safety-relevant notice
Inside areas of explosive atmospheres any electrostatic charging mechanism on the surface of the indicating terminals have
to be excluded if they are stronger than manual rubbing (e.g. cleaning by hand).
5.2
Maintenance
For the maintenance, servicing and checking of associated resources, adhere to the valid regulations in accordance with
directive 1999/92/EC, IEC 60079-19 and EN60079-17 !
Installation / dismantling, servicing and maintenance work may only be carried out by trained specialists. The general
statutory regulations and other binding directives on workplace safety, accident prevention and environmental protection
must be adhered to.
Observe the national disposal of waste regulations when disposing of this equipment at the end of its useful life.
5.2.1
Servicing
If operated correctly, in accordance with the installation instructions and environmental conditions, no regular servicing is
necessary.
5.2.2
Inspection
In accordance with IEC 60079-19 and EN 60079-17, the site operator has an obligation to ensure that any electrical
appliance installed within, an area containing gases and dust, which could be potentially explosive, is correctly installed by
trained personnel and that the installation is regularly inspected and correctly maintained to ensure the safety of the
operatives in the area.
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 23 of 46
5.3
Installation options
The POLARIS Panel PC can be installed directly in
■
■
■
Switch cabinet doors
Mimic panels
Enclosures
In order to guarantee IP 65, use the reinforcement frame and the enclosure’s own IP rating has to be suitable for the
application.
The following points should be taken into consideration when installing the POLARIS Panel PC:
■
■
■
■
Convenient height for operation.
Good lighting so that the display will be easily readable.
At ambient temperatures below 0°C, the POLARIS Panel PC has to be heated.
Below +10°C the POLARIS Panel PC needs to be heated to maintain
the lifetime of the backlight illumination.
■
Avoid installing in the immediate vicinity of switching devices or converters.
Note:
Only use heating systems, which are certified for explosive areas!
The following factors should be taken into consideration in order to ensure proper and workmanlike installation:
■
■
The installation location must be sufficiently stable / fixed.
The enclosure in which the POLARIS Panel PC is mounted must be strong enough to support
its weight.
■
Following the cutting out of the opening into which the POLARIS Panel PC is to be fitted, the
surface must be dressed to ensure it is smooth, level and undamaged so as to preserve the
integrity of the seal.
5.3.1
Cable glands / Conduits
When connecting cables and leads to supplies / communications equipment in increased safety protected areas, Ex certified
cable entries must be used which are suitable for each type of cable and lead. You must maintain the protection concept “e”
and include a suitable sealing element so that an IP rating of at least IP 54 is maintained.
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 24 of 46
5.4
Mechanical installation
In order to achieve an even clamping pressure, it is recommended that the reinforcement frame (not included in the scope
of the delivery) be inserted between the mounting clamps (included in scope of the delivery) and the enclosure.
■
■
■
Tighten the fixing screws in the mounting brackets slightly.
Check the position of the display and the seal.
Tighten the set screws so as to ensure an adequate seal on the POLARIS
Panel PC is assured.
5.4.1
Recommended enclosure
■
Stainless steel enclosure with wall thickness > 2 mm. In this case the
reinforcement frame between the retaining clips and enclosure material should always
be used.
■
Reinforcement frame for maintenance of Protection Class IP 65
for
for
POLARIS Panel PC 19.1"
POLARIS Panel PC 15"
(05-0205-0010)
(05-0205-0009)
5.4.2
Special installation instructions
In order to guarantee the IP degree of enclosure protection = IP 54 for installation in 2G enclosures of Ex e type
of protection (e.g. control equipment), and = IP 6X for installation in 2D enclosures in areas where combustible
dusts exist - with “protection through the enclosure” type of protection - the reinforcement frame should be used
for fastening on the front side.
5.4.3
Cover Ex i terminal box
When using a housing with a degree of protection of at least IP 20, the cover for the Ex i box can be dispensed
with.
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 25 of 46
5.4.4
General data
■
The user is allowed to perform only the wiring work necessary on the terminals accessible
to him. Any more extensive dismantling of the device may be performed only by the
manufacturer or by persons authorized by the manufacture. The unit is factory sealed. Do
not open!
■
Ex i-terminal compartment marked:
ꢀ
with terminals for
- USB Ex i memory stick
Type 17-71VZ-50..
ꢀ
with terminals for Ex i input device (Ex i-data)
- Keyboard
- Mouse
Type 17-71VZ-40../....
Type 17-71VZ-10../....
Type 17-71VZ-20../....
Type 17-71VZ-30../....
- Trackball
- Touchpad
- Hand-held scanner BCS 302ex
Type 17-21BA-0020
(not possible in combination with touch screen)
Work may be performed on the terminal compartment with the system live even
if explosive atmospheres are present.
Do not connect the keyboard, mouse, trackball and touch pad while energised!
■
■
■
The Ex e terminal compartment with terminals for the power supply and data cable may be
opened only provided it has been ensured that no explosive atmosphere is present and that
the power is off.
The unit may only be started (if an explosive atmosphere is present) once it has been
ensured that the unit is completely closed and that all bolts and screws have been correctly
tightened.
Stand-alone POLARIS Panel PC and flush-fitted units with a damaged glass must be taken
out of operation immediately.
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 26 of 46
5.4.5
Installation guidelines
■
The external earth connection facility should be connected to the equipotential bonding
conductor of the potentially explosive area. Since the intrinsically safe circuits are direct-
connected to earth, equipotential bonding must be maintained during complete installation of
the intrinsically safe circuits.
■
■
■
All current safety and accident prevention regulations must be observed.
Units must only be operated after proper installation.
It must be possible to de-energise the products at any time (in fixed installations by means of
an mains switch or fuse which isolates each of the supply cables). The PE terminals on the
back of the unit must be connected to the protective earth conductor.
■
It must be ensured that supply voltage is the same as that stated in this manual and that the
tolerances are adhered to.
■
■
Malfunctions may occur if the stated tolerances are either exceeded or are insufficient.
Steps must be taken to ensure that the system is not put into hazardous, undefined states in
the event of power failures.
■
■
EMERGENCY STOP switches must remain effective in all operating modes and conditions.
Connection cables (especially data transmission cables) must be selected and installed so as
to preclude impairment of the system’s functionality by capacitive or inductive interference.
Appropriate measures must be taken to deal with open circuit states in such a way that the
system cannot enter undefined states
■
Wherever malfunctions are liable to cause injury to persons or damage to property
additional external safety circuits must be installed (e.g. limit switches, mechanical
interlocks, etc.)
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 27 of 46
6. Connection cables (pin assignment)
6.1
RS 422 interface
Connection of a controller via an RS 422 interface of the POLARIS Panel PC.
RS422 Modul
Terminal compartment of the POLARIS Panel PC
Controller
RxD B (RxD+)
TxD B (TxD+)
Data Out
Data In
TxD A (TxD-)
RxD A (RxD-)
TxD B (TxD+)
TxD A (TxD-)
RxD B (RxD+)
Data In
Data Out
RxD A (RxD-)
to other POLARIS Panel PC's or
POLARIS Control
if final device
PE
ꢀ
Pins 19-23, 20-24, 21-25, 22-26 are already connected inside.
In most cases, internal EMC measures allow the installation of termination resistors at the
beginning and the end of the bus line to be dispensed with.
Depending on local conditions, there might occasionally be impairment of data transfer.
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 28 of 46
6.2
RS 485 interface
ꢀ
BARTEC supplies all the RS 485 interfaces as RS 422.
Connection of a controller via an RS 485 interface of the POLARIS Panel PC.
RS485 Modul
Terminal compartment of the POLARIS Panel PC
Controller
TxD B (TxD+)
TxD A (TxD-)
RxD B (RxD+)
RxD A (RxD-)
TxD B (TxD+) / RxD B (RxD+)
Data Out
Tx enable
Data In
TxD A (TxD-) / RxD A (RxD-)
to other POLARIS Panel PCs or
POLARIS Control
17
18
if final device
PE
See the interface description from the controller manufacturer for the relevant pin assignment of the controller.
ꢀ
If it is intended to use the RS422 as an RS485 interface, Pin 21/Pin 23 and Pin 22/Pin
must be bridged externally.
Pin 19-23, 20-24, 21-25, 22-26 are already connected inside.
In most cases, internal EMC measures allow the installation of termination resistors at
the beginning and the end of the bus line to be dispensed with.
Depending on local conditions, there might occasionally be impairments of data transfer.
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 29 of 46
6.3
PROFIBUS-DP interface
Connection of a controller via a PROFIBUS-DP interface of the POLARIS Panel PC.
The PROFIBUS-DP interface may only be applied in combination with the visualisation software BMS Graf pro.
PROFIBUS-DP module
Terminal compartment of the POLARIS Panel PC
Controller
A
Data Out
B
A
Data In
to other PROFIBUS participants
B
if final device is in bus
(termination)
PE
See the interface description from the controller manufacturer for the relevant pin assignment of the controller.
ꢀ
Pins 26-24-22, 25-23-21 are already connected inside.
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 30 of 46
6.4
Supply module for BCS 302ex
Terminal connection diagram for hand-held scanner BCS 302ex to supply module via a connector/adapter.
Panel PC
Terminal no.
Description Adapter / connector
PIN
Description
BCS 302ex
PIN
Description
2
1
3
TxD
+UB
GND
PIN 3
PIN 1
PIN 2
TxD / RxD
Ucc / +UB
GND
PIN 3
PIN 1
PIN 2
TxD / RxD
Ucc
GND
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 31 of 46
7. Installation additional components
7.1
Connection of Ex i keyboard to the POLARIS Panel PC
■
■
Make the connection between the POLARIS Panel PC and the Ex i keyboard.
Connection via connecting cable, longer than approx. 1.80 m
- Keyboard and mouse
- Keyboard and trackball
- Keyboard and touchpad
Type 05-0068-0163
Type 05-0068-0172
Type 05-0068-0183
If you use another USB stick than the BARTEC Ex i USB memory stick,
the USB interface can be destroyed.
7.2
Connection of BARTEC USB Ex i memory stick
Preconditions:
BARTEC USB Ex i memory stick (it is not allowed to apply any other USB stick!)
Connect BARTEC USB Ex i memory stick to the intrinsically safe socket
for the USB Ex i memory stick during operation.
Only apply the USB equipment mentioned as follows in the safe area!
7.3
7.4
Connection of USB CD Rom drive
Precondition:
USB CD ROM drive with external power supply (USB 1.1 compatible!)
Connection to the intrinsically safe socket of the USB Ex i memory stick
Connection of USB mouse and USB keyboard
Precondition:
USB HUB (own power supply), USB mouse, USB keyboard
Connection to the intrinsically safe socket of the USB Ex i memory stick
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 32 of 46
8. Configuration of POLARIS Panel PCs
8.1
Network (Ethernet) setup
Precondition:
Physical connection (connection of Ethernet cable to a network
(e. g. switch, hub, server)
1.
2.
Go to Start ꢁControl panel <double click>
Mark "Network connections" (chart 1) and activate with <double click>
Chart 1
3. Select LAN connection (chart 2) with < double click >
Chart 2
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 33 of 46
4. To select the function Internet Protocol click on sub item "Properties"
Chart 3
5. With a < double click > on Internet Protocol the function is activated (chart 4)
Chart 4
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 34 of 46
6.
The following chart appears when the network and
a DHCP server are available.
Chart 5
7.
Configuration example (chart 6) when no network and no
DHCP server are available (connection via switch or HUB)
Chart 6
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 35 of 46
8.2
Calibration of touch screen
<Double click> on the touch screen symbol in the notification area
The following window opens:
.
Select the function “Calibrate” (bottom left) to open the following window:
The following is displayed on the screen:
Touch arrow tight or cross centers as they appear. Calibration will terminate if no touch is
received within 10 seconds. Press escape to abort the calibration.
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 36 of 46
8.2.1
Touch screen signs and symbols in notification area
The mouse symbol indicates which key function of the mouse is carried out when the
touch screen is touched. in this case it is the left mouse button.
when touching the symbol once the function changes once to the right mouse button
until it is touched again. Then standard settings apply again.
The touch screen symbol indicates that the touch screen software is installed and that
it is ready for operation. Should the symbol with a red star appear then there is no
connection to the touch screen or the touch screen is not detected.
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00
Page 37 of 46
9. Accessories
Included in the scope of the delivery:
Name
Order No.
WINDOWS XP Professional
Driver for Mainboard and Touch
Mounting clamps
05-0091-0112
Not included in the scope of the delivery:
Name
Order No.
Enclosure for POLARIS Panel PC 19.1"
Enclosure for POLARIS Panel PC 15"
Stand for floor mounting, rotary"
Support arm for wand mounting, rotary"
Keyboard in respective national language
Mouse
"Exclusive"
"Exclusive"
03-8900-0225
03-8900-0224
05-0005-0050
05-0005-0058
17-71VZ-40.0
17-71VZ-1000
17-71VZ-2000
17-71VZ-3000
05-0068-0163
03-0068-0204
03-0068-0172
05-0068-0205
03-0068-0183
03-0068-0206
05-0205-0010
05-0205-0009
17-28TF-0071/0100
17-28TF-0071/0200
17-28TF-0071/0300
17-28TF-0071/0101
17-28TF-0071/0201
17-28TF-0071/0301
03-0390-0020
03-0390-0021
03-0390-0022
17-21BA-002.
Trackball
Touchpad
Connection cable
Connection cable
Connection cable
for keyboard and mouse
1.8 m
3.0 m
1.8 m
3.0 m
1.8 m
3.0 m
for keyboard and trackball
for keyboard and touchpad
Reinforcement frame for POLARIS Panel PC 19.1"
Reinforcement frame for POLARIS Panel PC 15"
Program software BMS Graf Pro
German
English
French
German
English
French
German
English
French
Upgrade for BMS Graf Pro
User Manual
(1 exemplar included in scope of the delivery)
Hand-held scanner BCS 302ex with integrated decoder
USB Ex i memory stick
17-71VZ-5000
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix – User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
EC-Declaration of Conformity
Page 39 of 46
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix – User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
EG-Baumusterprüfbescheinigung
Page 40 of 46
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix – User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
EG-Baumusterprüfbescheinigung
Page 41 of 46
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix – User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
EG-Baumusterprüfbescheinigung
Page 42 of 46
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix – User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
EC-TYPE-EXAMINATION CERTIFICATE
Page 43 of 46
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix – User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
EC-TYPE-EXAMINATION CERTIFICATE
Page 44 of 46
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix – User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
EC-TYPE-EXAMINATION CERTIFICATE
Page 45 of 46
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix – User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Additional information
Page 46 of 46
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc • User manual for POLARIS Panel PC 19.1" and 15"
•
Revision 1 / Status: January, 3rd, 2006
•
Technical data subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
|