Humax Satellite TV System F2 FOXT User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notice  
**  
Copyright (Copyright © 2001 HUMAX Corporation)  
Not to be copied, used or translated in part or whole without HUMAX's prior consent in writing except  
approval of ownership of copyright and copyright law.  
**  
Warranty  
The information in this document is subject to change without notice. HUMAX does not have any  
responsibility for direct, indirect, accidental, necessary and other corruptions due to your offer or use  
of the information contained in this manual.  
*T* rademarks  
VIACCESS™ is a trademark of France Telecom.  
CryptoWorks (TM) is a trademark of Philips Electronics N.V.  
Irdeto is a trademark of Mindport BV.  
Nagravision is a registered trademark of KUDELSKI S.A.  
Conax is a trademark of Telenor Conax AS.  
'Dolby' and the double-D symbol are trademarks of Dolby Laboratories.  
Manufactured under license from Dolby Laboratories.  
**  
Thank you for purchasing a HUMAX digital terrestrial receiver. Please read this user manual  
carefully, to be able to safely install, use and maintain the receiver at maximum performance. Keep  
this user manual next to your receiver for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 1  
**  
Notice  
**  
Read this manual carefully and make sure you understand the provided instructions. For your safety,  
know what the reaction upon each action will be.  
**  
Warnings, Cautions and Notes  
Throughout the whole manual, pay special attention to the following marks that indicate hazardous  
situations.  
**  
•
Warning  
**  
Indicates a hazardous situation which, if not avoided, could result in (serious) injury.  
**  
•
Caution  
**  
Indicates a situation which, if not avoided, could damage the equipment or other apparatus.  
**  
•
Note  
**  
Indicates additional information to the user to make the user aware of possible problems and  
information of any importance to help the user to understand, to use and to maintain the  
installation.  
**  
To reduce the risk of electric shock, do not remove cover (or back). No  
user serviceable parts inside. Refer servicing to qualified service  
personnel.  
This symbol indicates dangerous voltage inside the product that  
presents a risk of electric shock or personal injury.  
This symbol indicates important instructions accompanying the product.  
GB 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
Safety and Warning  
**  
This digital terrestrial receiver has been manufactured to satisfy international safety standards.  
Please read the following safety precautions carefully.  
**  
Safety Instructions and Precautions  
**  
1. MAINS SUPPLY  
**  
90 - 250V AC 50/60Hz  
Operate your product only from the type of power source indicated on the marking label. If you  
are not sure of the type of power supplied to your home, consult local power company.  
Disconnect the receiver from the mains before you start any maintenance or installation  
procedure  
**  
2. OVERLOADING  
**  
Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or  
shock.  
**  
3. LIQUIDS  
**  
The receiver should not be exposed to any liquids such as dripping or splashing. In addition,  
no objects filled with liquids, such as vase, shall be placed on the apparatus.  
**  
4. CLEANING  
**  
Disconnect the receiver from the wall outlet before cleaning.  
Use a light damp cloth (no solvents) to dust the receiver.  
**  
5. VENTILATION  
**  
The slots on top of the receiver must be left uncovered to allow proper airflow to the unit. Do  
not stand the receiver on soft furnishings or carpets. Do not stack electronic equipments on  
top of the receiver.  
**  
6. ATTACHMENTS  
**  
Do not use any unsupported attachments as these may be hazardous or cause damage the  
receiver.  
**  
7. CONNECTION TO THE AERIAL  
**  
Disconnect the receiver from the mains before connecting or disconnecting the cable from the  
aerial. Failure to do so can damage the aerial.  
**  
8. CONNECTION TO THE TV  
**  
Disconnect the receiver from the mains before connecting or disconnecting the cable from the  
aerial. Failure to do so can damage the TV.  
**  
9. EARTHING  
**  
The aerial cable must be buried in the ground.  
The buried cable of the system must comply with SABS 061.  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 3  
**  
Safety and Warning  
**  
10.LOCATION  
**  
Place the receiver indoors to avoid exposing it to lightening, rain or sun.  
Do not place it near a radiator or heat register.  
Make sure it has more than 10 cm clearance from any appliances susceptible to  
electromagnetic influences, such as TV and VCR.  
Do not block these openings with any object, and do not place the product on a bed, sofa, rug,  
or other similar surface.  
If you place the product on a rack or bookcase, ensure that there is adequate ventilation and  
that you have followed the manufacturer's instructions for mounting.  
Do not place the product on an unstable cart, stand, tripod, bracket, or table where it can fall.  
A falling product can cause serious injury to a child or adult, and serious damage to the  
appliance.  
**  
11.LIGHTNING, STORM, or NOT IN USE  
**  
Unplug the product from the wall outlet and disconnect the aerial during a lightning storm or  
when left unattended and unused for long periods of time. This will prevent damage to the unit  
due to lightning and power-line surges.  
**  
12.EXTRANEOUS OBJECTS  
**  
Do not insert anything through the openings in the unit, where they can touch dangerous  
voltage point or damage parts.  
**  
13.REPLACEMENT of PARTS  
**  
When the replacement parts are required, be sure the service technician uses replacement  
parts specified by the manufacturer or those that have the same characteristics as the original  
part. Unauthorised substitutions may result in additional damage to the unit.  
**  
**  
Warning  
**  
1. Follow these directions in order not to damage the power cord or plug.  
Do not modify or process the power cord or plug arbitrarily.  
Do not bend or twist the power cord too much.  
Make sure to disconnect the power cord with the plug held.  
Keep heating appliances as far as possible from the power cord in order to prevent the cover  
vinyl from melting.  
2. Follow these directions. Failure to follow one of them may cause electrical shock.  
Do not open the main body.  
Do not insert metals or inflammable objects inside the product.  
Do not touch the power plug with a wet hand.  
Disconnect the power cord in case of lightening.  
3. Do not use the product when it is out of order. If you continue to use the product when  
defective, serious damage can be caused toit. Make sure to contact your local product  
distributor if the product is out of order.  
GB 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
Contents  
**  
1. Before Using the Receiver  
GB7  
**  
1.1 Package Contents  
1.2 Front Panel  
GB7  
GB8  
GB9  
1.3 Rear Panel  
1.4 Remote Control  
GB10  
2. Setup  
GB12  
**  
2.1 Connecting Aerial  
2.2 Powering On  
GB12  
GB14  
3. Installation Wizard  
4. Basic Operation  
GB15  
GB16  
**  
4.1 Switching Channel  
4.2 Volume Control  
GB16  
GB16  
GB16  
GB17  
GB17  
GB18  
GB20  
4.3 Text and interactive services  
4.4 Change the Subtitle Language  
4.5 Change a Audio Language  
4.6 Programme Information (I- plate)  
4.7 Option List  
5. Channel List  
GB22  
**  
5.1 Displaying and Switching Channel List  
5.2 Changing Channel List Group  
5.3 Edit Channels  
GB22  
**  
GB23  
GB24  
GB26  
GB29  
5.4 Edit Favourite Channels  
5.5 Channel Change Mode  
6. Programme Guide  
GB30  
**  
6.1 Viewing Programme Guide Information  
6.2 Finding a Programme  
GB30  
**  
GB32  
6.3 Viewing Reserved Programme  
GB33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 5  
**  
Contents  
**  
7. Setting Preferences  
7.1 Parental Control  
GB35  
**  
GB35  
7.2 Language Setting  
7.3 Time Setting  
GB37  
GB38  
GB40  
GB40  
GB42  
GB43  
7.4 Schedule  
7.5 A/V Control  
7.6 UHF Tuning  
7.7 Miscellaneous Settings  
8. Installation  
GB44  
**  
8.1 Automatic Search  
8.2 Manual Search  
8.3 Default Setting  
GB44  
GB45  
GB47  
9. Software Update  
GB48  
**  
9.1 OTA (Over the Air)  
GB48  
9.2 S/W Update from PC  
GB51  
10. System Information  
GB52  
**  
10.1 Status  
GB52  
10.2 Signal Detection  
GB52  
11. GAMES  
GB53  
GB54  
GB63  
GB64  
12. Manipulating your TV using Remote Control  
13. Menu Map  
14. Trouble Shooting  
**  
14.1 Trouble Shooting  
14.2 Error Message  
GB64  
GB65  
15. Specification  
16. Glossary  
GB66  
GB68  
GB69  
17. Service and Support  
GB 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
1.Before Using the Receiver  
**  
This chapter describes detail instructions on the product and its accessories.  
1.1 Package Contents  
Please check all package contents before using your receiver.  
**  
**  
Remote Control (1)  
User's Manual (1)  
Batteries (2)  
Scart Cable (1)  
**  
Note: Since faults may occur if the remote control is being left without a battery for a long time,  
always keep the battery inserted in the remote control.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 7  
**  
1. Before Using the Receiver  
**  
1.2 Front Panel  
**  
1. STANDBY Button  
**  
Switches between Operation and Standby modes.  
2. TV/RADIO Button  
**  
Switches between TV and Radio.  
3. CH - / CH +  
**  
Moves the TV/Radio channel up/down.  
4. STANDBY LED  
**  
Red light is displayed when the product is in the Standby mode.  
Green light is displayed when the product is in operation.  
5. TV LED  
**  
Green light is displayed when the receiver is in TV mode.  
6. RADIO LED  
**  
Amber light is displayed when the receiver is in Radio mode.  
GB 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
1.3 Rear Panel  
**  
1. ANTENNA IN  
**  
Connects a aerial to a ANTENNA input jack on the your receiver.  
**  
2. TV / VCR  
**  
Connects a RF signal from your receiver to RF (ANT) input jack on your TV or VCR.  
**  
3. TV SCART  
**  
Connects a TV SCART cable.  
4. VCR SCART  
**  
Connects a VCR SCART cable.  
5. AUDIO L/R  
**  
Connects to your TV or VCR and output Audio signals.  
6. VIDEO  
**  
Connects to your TV or VCR and output Video signals.  
7. RS-232C  
**  
Connects to your PC to upgrade product’s software programme.  
8. S/PDIF  
**  
Outputs the digital audio signals(S/PDIF).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 9  
**  
1. Before Using the Receiver  
**  
1.4 Remote Control  
**  
1. DTV  
2. TV  
7. COLOR BUTTONS (R/G/Y/B)  
8. CH-/CH+(PAGE-/PAGE+)  
13. TV/RADIO  
14. STANDBY  
15. GUIDE  
16. EXIT  
18. V-/V+  
19. MUTE  
3. NUMERICAL BUTTONS 9. MENU  
20. I (INFORMATION)  
21. SUBTITLE  
22. AUX  
4. LIST  
10. TEXT  
5. BACK  
11. SOUNDTRACK  
12. OPT+ (OPTION)  
17. OK  
6. ARROW BUTTONS  
GB 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
1. DTV  
12.OPT+ (OPTION)  
**  
**  
Controls the Receiver.  
Displays the channel attributes during  
**  
watching a programme.  
**  
2. TV  
**  
13.TV/RADIO  
Controls the TV.  
**  
**  
Switches between TV and Radio  
3. NUMERICAL BUTTONS  
modes.  
**  
**  
Enters a TV/Radio channel number or  
14.STANDBY  
menu option number.  
**  
**  
Switches between Operation and  
4. LIST  
Standby modes.  
**  
**  
Displays the channel list.  
15.GUIDE  
**  
**  
5. BACK  
Displays the Programme Guide.  
**  
**  
Returns to the previous menu and  
16.EXIT  
screen.  
**  
**  
Exits the main menu or Guide screen.  
**  
6. ARROW BUTTONS  
**  
17.OK  
Changes the channel or move the  
cursor to the up, down, left or right  
**  
Selects a menu, or confirm the selected  
operation. And display the channel list  
menu option.  
**  
during watching a programme.  
**  
7. COLOR BUTTONS (R/G/Y/B)  
**  
18.V-/V+  
Select color keys for interactive  
**  
applications.  
Adjusts the audio volume.  
**  
**  
8. CH-/CH+(PAGE-/PAGE+)  
19.MUTE  
**  
**  
Changes the Channel or Page.  
Pauses the audio temporarily. That is,  
**  
volume on/off temporarily.  
**  
9. MENU  
**  
20.I (INFORMATION)  
Displays the main menu.  
**  
**  
Displays the information about the  
10.TEXT  
channel and programme.  
**  
**  
Displays digital text.  
21.SUBTITLE  
**  
**  
11.SOUNDTRACK  
Changes the subtitle language.  
**  
**  
Displays the Soundtrack.  
22.AUX  
**  
**  
Controls input mode of TV  
**  
Note: This remote control can also control your TV. To set the remote control for your TV, please  
refer to Chapter 12.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 11  
**  
2. Setup  
**  
This chapter describes how to set up the receiver. Select the most appropriate procedure depending  
on your case.  
Note: If you encounter any problem when setting up the receiver, please contact your local  
product distributor.  
Where possible, use an outdoor roof aerial intended for receiving UHF channels between  
21 and 69.  
It is not advisable to use indoor or window mounted aerials, as digital channels will be  
difficult or even impossible to receive.  
2.1 Connecting Aerial  
1. Connecting TV and VCR  
**  
•
•
Connect the cable of your TV aerial to the ANTENNA IN connector on the rear of the receiver.  
Scart and co-axial cable are connected as in the figure above.  
GB 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
2. Connecting Hi-Fi system 1  
Connect the outputs on this receiver to corresponding inputs on your Hi-Fi system.( left audio out to  
left audio in, right audio out to right audio in)  
3. Connecting Hi-Fi system 2  
If you wish to connect the optical S/PDIF terminal and Dolby digital decoder to listen digital audio,  
connect as following.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 13  
**  
2. Setup  
**  
2.2 Powering On  
1. Connect the power cord of the receiver to a wall outlet.  
2. Power on by pressing the STANDBY  
button at  
Remote Controller.  
The Standby LED indicator is turned on Green.  
GB 14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
3. Installation Wizard  
**  
When powering on your receiver for the first time after purchasing, the Installation Wizard is  
automatically started. It immediately performs Channel Search.(You can run the Installation Wizard  
in Default Setting.)  
Please wait for finishing the Channel Search. If you want to stop  
the Channel Search, select the OK  
button.  
If the Channel Search is stopped or finished, the result of  
Channel Search is automatically saved.  
When completing Channel Search, you can enjoy programmes.  
Warning: Press the EXIT  
button to save the previous input information and exit the  
installation wizard when running the installation wizard. If you exit the install wizard  
without fully completing the setting procedures, you may not watch any broadcasting  
normally. In this case, you can use the Installation Menu to configure your receiver as  
you like.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 15  
**  
4. Basic Operation  
**  
This chapter describes functions such as switching channel, volume control, and basic features for  
watching programmes.  
4.1 Switching Channel  
You can switch the current channel using one of the following methods.  
1. Press the CH-/CH+  
button.  
2. Enter your desired channel numeric using the NUMERICAL (0-9) buttons to move to the  
channel directly.  
3. Press the TV/RADIO  
button to switch between TV channel and Radio channel.  
Note: You can switch channel using Programme Guide or Channel List. Please refer to Chapter 5  
and 6 for more information.  
4.2 Volume Control  
1. Press the V-/V+  
2. Press the MUTE  
buttons to adjust the audio volume of your TV.  
button to stop the sound of your TV temporarily.  
4.3 Text and interactive services  
If your chosen channel has teletext (MHEG) features , you can access them. Teletext services often  
load automatically shortly after the Digital Teletext window is displayed. In which case, simply follow  
the given instructions(press color buttons).  
1. Press TEXT  
button to access teletext(MHEG) features.  
button again to return to normal viewing.  
button to exit this service.  
2. Press TEXT  
3. Press the CH-/CH+  
Note: You should select OFF from the subtitle language to display MHEG OSD.  
GB 16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
4. Basic Operation  
**  
4.4 Change the Subtitle Language  
If the current programme provides Subtitle information, you can select the language for the Subtitle.  
1. Press the SUBTITLE  
button to display the subtitle  
language list.  
2. Select your desired subtitle language using the  
button, and press the OK  
button. Then the subtitle  
will be displayed in the selected language at the bottom  
of the screen.  
3. Select OFF from the subtitle language list not to display  
subtitle from the screen.  
Note: You can select a default subtitle language by selecting MENU - Preferences - Language  
Setting - Subtitle Language.  
The subtitle set up as the value of MENU when you change channel and turn on or off  
power.  
4.5 Change a Audio Language  
If the current programme is available in multiple audio languages, you can select the language that  
you wish to listen in.  
1. Press the SOUNDTRACK  
button to display  
soundtrack list.  
2. Select your desired audio language using the  
button to change Audio immediately.  
3. Select Audio Direction(left, right, stereo) using the  
button.  
Note: you can select your desired default audio language by selecting MENU - Preferences -  
Language Setting -Audio Language.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 17  
**  
4. Basic Operation  
**  
4.6 Programme Information (I- plate)  
Programme information is always displayed for a specific period of time whenever you switch  
channels. You can view the programme information by pressing the i  
button while watching a  
programme. Press the EXIT  
button to hide the I-plate.  
1. General Information  
General Information is displayed as follows on the screen.  
**  
1. Channel number and channel name  
2. Programme name  
3. Icons  
Displayed only if this programme is reserved.  
Represents parental level. It indicates the minimum level of ages that the  
programme is targeted at.  
Displayed only when the channel is a locked channel.  
Displayed only when the channel is a scrambled channel.  
Displayed only when subtitle information is available.  
Displayed only when there is any teletext information.  
Displayed only when the programme is a dolby digital one.  
Displayed when the channel supports MHEG.  
Displayed when the channel supports data channel.  
GB 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
4. Current time  
5. Detail programme information: displayed if detailed programme information is provided.  
6. Channel looping mode and Channel List Name : if you select Within the current channel list  
by selecting MENU - Edit channels - Channel Change Mode , the Icon of Channel looping  
mode is displayed. And channel list, which you selected, is displayed.  
7. Programme broadcasting time and progress bar: displays programme playing time and  
progress bar.  
8. Next programme Information : displayed if next programme information is provided. Press the  
button to display the next programme information.  
Note: If there is no available programme information, programme information is not displayed.  
2. Detail Programme Information  
You can see detailed information about the current programme.  
Press the i  
button where I-plate is displayed to view  
detailed information.  
Note:  
•
•
Press the i  
button again to hide the information box.  
If the Detail information is more than one page, use  
button to move to the previous or next page.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 19  
**  
4. Basic Operation  
**  
4.7 Option List  
You can view and confirm detailed information about the current channel and change the information  
in necessary.  
Note: Press the OPT+  
button when the channel list is displayed to view Option List. Then  
the following functions in the option list are performed to the current channel where cursor  
is located.  
1. Add a channel to favourite group  
You can add current channels to the favourite group immediately. Also, you can add a channel to  
multiple Favourite groups.  
1. Press the OPT+  
2. Select Favourite using the  
or OK button.  
3. Select favourite group using the  
button.  
button, and press the  
button and press  
the OK  
button to register for Favourite Group.  
4. Press the OK  
button again on the selected  
Favourite Group to release the registered channel.  
5. Move to the parent menu using the button to save the  
changes automatically.  
Note: For detailed information about how to change Favourite  
Group's name and how to register Favourite Channel  
for the whole channels, refer to Chapter 5.  
GB 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
2. Lock/Unlock a Channel  
You can lock or unlock the current channel while watching a programme.  
1. Press the OPT+  
button.  
2. Select Lock using the  
button, and press the or  
OK  
3. Select Lock option using the  
OK button.  
4. Select Unlock option using the  
the OK button.  
button.  
button, and press the  
button, and press  
5. You will be prompted to enter your Password. Enter your  
password to unlock the channel.  
6. Move to the parent menu using the button to save the  
changes automatically.  
Note: When switching to the Locked Channel, you must enter  
the password to watch a programme.  
3. Delete a Channel  
You can delete the current channel while watching a programme.  
1. Press the OPT+  
button.  
2. Select Delete using the  
button, and press the OK  
or button.  
3. Select Yes in the confirmation message and press the  
OK button.  
4. Enter password using the NUMERICAL (0-9) button to  
delete the current channel and move to the next channel.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 21  
**  
5. Channel List  
**  
3 types of channel lists are provided for easy and quick channel searching.  
TV  
The list of all TV channels with 2 sub-groups: one is sorted by channel number, the  
other is sorted by channel name.  
Radio  
Favourite  
The list of all Radio channels with 2 sub-groups: one is sorted by channel number,  
the other is sorted by channel name.  
The list of the favourite channels with 5 sub-groups that You can organise channels  
by your private taste.  
5.1 Displaying and Switching Channel List  
You can display channel list using LIST  
button and switch into other channel on the channel  
list.  
1. Press the LIST  
button while watching a programme  
to display the selected channel list.  
2. Select your desired channel using the  
button and  
press the OK  
button to change the channel.  
3. Enter the channel numeric directly using NUMERICAL  
(0-9) button to move cursor into your desired channel.  
And then press the OK  
button to change into the  
selected channel.  
4. Select On by going to MENU - Preferences -  
Miscellaneous Settings - Option in CH List to display  
scramble icon in the channel list.  
Select OFF by going to MENU - Preferences -  
Miscellaneous Settings - Optoin in CH List to display  
only channel list without scramble icon.  
**  
Note:  
•
•
If there are multiple channels, press the PAGE-/PAGE+  
Whenever you press the TV/RADIO button while the channel list is displayed, the  
channel list will be switched between TV and Radio channel list.  
button to move by channel.  
GB 22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
5.2 Changing Channel List Group  
You can select channel list by group.  
1. Press the button while the channel list is displayed to  
view the group list.  
2. Select your desired channel group using the  
to display its sub-groups.  
button  
3. Press the OK  
or button, select your desired  
button, and then press the OK  
sub-group using the  
button.  
4. The channel list for the selected sub-group is displayed.  
Note:  
•
•
The sub-group of Favourite channel list may exist or not depending on your configuration.  
If Within the Current Channel List option is selected from MENU - Edit channels - Channel  
Change Mode menu, you can only change programme within the selected channel list using  
the CH-/CH+  
while your watching a programme.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 23  
**  
5. Channel List  
**  
5.3 Edit Channels  
You can edit all channels or each channel by channel list group.  
1. Press the MENU  
2. Select Edit Channels using the  
the OK or button.  
3. Select Edit Channel lists using the  
press the OK or button.  
button.  
button, and press  
button, and  
4. You will be prompted to enter your password. Enter your  
password using NUMERICAL (0-9) button.  
Note:  
•
Press the BACK  
and return to the previous menu, press the MENU  
EXIT button to exit the menu screen.  
You can easily navigate all menus using the assigned  
or button to save the changes  
or  
•
numeric for each menu. Press the MENU - 2 - 1 in order  
at remote control to select Edit Channel Lists menu.  
1. Select a Channel Group  
You can select the channel list group to edit. TV and Radio sub-groups can be selected.  
1. Press the OK  
or button in group to display  
Channel List Group.  
2. Select your desired Channel List Group using the  
button, and press the OK  
button.  
Note:  
•
•
Press the TV/RADIO  
button to move to TV or RADIO channel list directly.  
For editing Favourite channel list, move to MENU - Edit Channels - Edit Favourite  
Channels menu.  
GB 24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
2. Delete Channels  
You can delete one or more channels.  
1. Move the cursor to the channel list using the  
button.  
2. Select your desired channel, and then press the OK  
button to delete the channel(s). You can select multiple  
channels.  
3. Select Delete in the right using the button, and press  
the OK  
button.  
3. Lock/Unlock Channels  
You can lock or unlock one or more channels.  
1. Move the cursor to the channel list using the  
button.  
2. Select your desired channel, and then press the OK  
button to lock/unlock the channel(s). You can select  
multiple channels.  
3. Select Lock in the right using the button, and press the  
OK  
button.  
Note:  
•
Only if locked channel(s) is selected or all channels are  
locked, Lock is switched into Unlock. When you press  
Unlock, locked channel is switched into unlocked  
channel.  
•
Enter password using the NUMERICAL (0-9) button to  
watch locked channel.  
4. Select/Unselect All Channels  
You can select/unselect all channels at a time.  
1. Select Select All in the right and press the OK  
button to select all channels.  
2. Select Unselect All in the right and press the OK  
button to unselect all the selected  
channels.OFF  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 25  
**  
5. Channel List  
**  
5.4 Edit Favourite Channels  
You can edit Favourite channel or Favourite channel list.  
1. Press the MENU  
2. Select Edit Channels using the  
the OK button.  
3. Select Edit Favourite Channels using the  
button.  
button, and press  
button,  
and press the OK  
or button.  
Note:  
•
Press the BACK  
the MENU  
or button to save the changes and return to the previous menu. Press  
or EXIT button to exit the Menu screen.  
•
You can easily navigate all menu items using the assigned numerical button for each menu.  
Press the MENU - 2 - 2 in order on the remote controller to select the Edit Favourite  
Channels menu.  
**  
The buttons for editing the Favourite channel list are described in the following table.  
**  
**  
Add  
Adds Favourite channel.  
**  
**  
Remove  
Removes from the Favourite channel.  
**  
**  
TV/RADIO  
Switches between TV and Radio channel list.  
**  
**  
Fav.Group  
Changes Favourite channel list group.  
**  
**  
Move  
Moves the order of channel list within the Favourite channel list.  
**  
**  
Rename  
Renames the name of Favourite channel list.  
**  
**  
Sort  
Sorts channels by number or name in all TV/Radio channel list.  
**  
**  
Unselect All  
Unselect all the selected channel.  
GB 26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
1. Add/Remove favourite channels  
You can add favourite channel(s) to a specific Favourite channel list or remove the added favourite  
channel(s) from the list.  
1. Select Favourite Group using  
2. Select your desired channel(s) in all TV/Radio channel  
list, and press to add Favourite channel(s).  
3. Select your desired channel(s) in Favourite channel list,  
and press to remove Favourite channel(s).  
.
Note: You can switch between TV and Radio channel list  
using TV/RADIO button or at remote control.  
2. Move favourite channels  
You can move favourite channel(s) to your desired location within the Favourite channel list.  
1. Select Favourite Group using  
2. Select your desired channel to move within the Favourite  
.
channel list and press the OK  
button.  
3. Select , and press the OK  
button.  
4. Move the cursor to your desired location using the  
button, and press the OK button.  
5. The selected channel(s) is moved to the desired location  
you selected.  
3. Rename a favourite channel list  
You can rename Favourite channel list.  
1. Select Favourite group to rename using  
2. Select , and press the OK button.  
.
3. Enter the Favourite channel list name using the  
keyboard displayed on the screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 27  
**  
5. Channel List  
**  
4. When finishing entering the Favourite channel list name,  
select OK, and press the OK  
button.  
4. Additional Features  
Additional Features provides many useful functions which are necessary to add Favourite Channel.  
**  
Change between TV and Radio channel list  
You can add not only TV channel(s) but also Radio channel(s) to Favourite channel list. Press  
switch all channel list into TV or Radio channels.  
to  
Note: You can also change into TV or Radio channel by pressing TV/RADIO  
button at  
remote controller.  
**  
Select a favourite channel list  
You can select your desired Favourite channel list to edit. Press  
to display the Favourite channel list. Then select your  
desired channel list using the  
button.  
button, and press the OK  
**  
Sort a channel list  
You can sort all TV or Radio channel lists by channel number or name for easy Favourite channel  
searching. If channel lists are sorted by channel number, is displayed. When you press this  
button, all the channel lists are sorted by name. Or, if channel lists are sorted by channel name,  
is switched into  
. Press this button to order channels by number.  
**  
Unselect all the selected channels  
Press  
button to unselect all the selected channel.  
GB 28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
5.5 Channel Change Mode  
You can change the channel either in the group or in the entire groups while watching a programme.  
1. Press the MENU  
2. Select Channel Change Mode using the  
and press the OK or button.  
3. Select All Channels or within the current channel list  
using the button, and press the OK button.  
button.  
button,  
Note: When Within the current channel list in Favourite Group option is selected, you can  
only change the channel within the current channel list. To change the channel in another  
channel list in which the current channel list is not located, change the channel list or select  
All channels option.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 29  
**  
6. Programme Guide  
**  
The Programme Guide displays programme information about each channel, based on the date and  
time.You can also schedule your watching using the information given.  
**  
6.1 Viewing Programme Guide Information  
You can view programme information for all channels.  
1. Press the GUIDE  
2. Move to previous or next programme within the same  
channel using the button.  
3. Move to another desired channel using the  
button.  
button.  
If there are multiple channels, use PAGE-/PAGE+  
button to move to channels by page. Also, you  
can enter your desired channel number using the  
NUMERICAL (0-9) button on the remote controller to  
move to the channel directly.  
4. Select your desired programme, and press the OK  
button. Then you can watch the programme if it is on air,  
or you can reserve it if it is the following programme.  
5. Press the i  
button in the selected programme to view  
Extended Information for the selected channel.  
**  
1. Viewing Guide Information by Groups  
You can view programme information for desired channel list by groups.  
1. Press the GUIDE  
button.  
2. Press the Red button to display the channel list group.  
3. Select your desired channel list group using the  
button to display the appropriate sub-group.  
4. Move the cursor to the sub-group using the button,  
select your desired sub-group using the  
and then press the OK button.  
button,  
5. The Programme Guide for selected channel list is  
displayed.  
GB 30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
2. Viewing Programme Information Using Time Bar  
You can quickly search for your desired time zone using the Time bar.  
1. Press the GUIDE  
2. Press the Green button to display Time Bar.  
3. Select the Time Bar button using the button, and  
button to move as your desired amount  
button.  
press the OK  
of time. If you press the button repeatedly, the same  
operation is repeated.  
4. Each button functions as follows.  
Now  
Moves to the current programme where the cursor is located.  
Moves to the previous programme or 30 minutes before.  
Moves to the next programme or 30 minutes after.  
Moves to 2 hours before.  
Moves to 2 hours after.  
Day  
Day  
Moves to one day before.  
Moves to one day after.  
5. Select  
button and press the OK  
button to exit the Time Bar.  
Note: Guide provides programme information from the previous day to the next 7 days.  
3. Reserving (Reserving a Watching)  
You can automatically reserve your desired programme by selecting the scheduled programme and  
pressing the OK  
button.  
1. Select the desired programme and press the OK  
button. The following message will be displayed.  
2. Select Yes and press the OK  
button to reserve the  
programme. When a reservation has been completed,  
the  
icon is displayed on the reserved programme.  
3. Select No and press the OK  
button not to reserve  
the programme.  
4. If the channel is locked, parental controlled or restricted  
by watching time, you will be prompted to enter your  
Password. Enter your Password to complete the  
reservation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 31  
**  
6. Programme Guide  
**  
6.2 Finding a Programme  
You can find your desired programme by programme name or genre easily.  
1. Press the GUIDE  
button.  
2. Press the Blue button to display Find screen.  
3. Enter the programme name directly using the keyboard  
displayed on the screen.  
4. When completing entering programme name, select the  
Find button, and press the OK  
5. If you select your desired programme from the results of  
finding programme screen and press the OK button,  
button.  
you can watch the programme if it is on air, or you can  
reserve your programme if it is scheduled(the following  
programme).  
6. Select By Genre and press the OK  
button to search  
button.  
programme by genre.  
7. Select your desired genre and press the OK  
8. As the result screen of Find programme by Name, select  
your desired programme from the Results of Finding  
Programme screen and press the OK  
button to  
watch the programme immediately or reserve the  
programme.  
Note: If you press Previous or Next button on the Keyboard  
displayed on the screen, the keyboard layout is switched.  
Note: The results of the finding programme may differ depending on the provided programme  
information.  
GB 32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
6.3 Viewing Reserved Programme  
You can add or edit reserved programmes by viewing the reserved programme list.  
1. Press the GUIDE  
button.  
2. Press the Yellow button to display the Schedule screen.  
3. Select the scheduled programme and press the OK  
button to edit the reservation information.  
4. Select vacant list and press the OK  
button to add a  
new reservation schedule.  
**  
1. Editing a Reserved Programme  
1. Change the reserved Start Time using the  
button  
and the NUMERICAL (0-9) buttons.  
2. Change the reserved End Time using the  
button and  
the NUMERICAL (0-9) buttons.  
3. Change the Repeat mode using the  
button. The  
options are Once, Daily, and Weekly.  
4. Select the Delete button and press the OK  
button to  
button to  
button to  
delete the reserved programme.  
5. Select the Cancel button and press the OK  
cancel the editing.  
6. Select the Save button and press the OK  
complete the editing.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 33  
**  
6. Programme Guide  
**  
2. Adding a Reservation  
1. Enter your desired channel number using the  
NUMERICAL (0-9) button. The channel name is  
automatically displayed by channel number.  
2. Enter your desired Start Time using the  
button and  
the NUMERICAL (0-9) button.  
3. Enter your desired End Time using the  
button and  
the NUMERICAL (0-9) button.  
4. Select one of repeat mode options among Once, Daily, and Weekly using the  
button.  
5. Select the Save button and press the OK  
6. Select the Cancel button and press the OK  
button to complete entering.  
button to cancel the reservation.  
**  
Note:  
•
•
•
You can reserve up to 20 programmes.  
If your desired programmed is already reserved, adjust the reservation appropriately.  
If the channel is locked, restricted by watching time, you will be prompted to enter your  
Password to complete the reservation.  
GB 34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
7. Setting Preferences  
**  
You can set censorship, watching time, and all other items suitable for your environment.  
Note:  
•
Press the BACK  
the MENU or EXIT  
or button to save the changes and return to the previous menu. Press  
button to exit the Menu screen.  
•
You can easily select any item from the menu using the NUMERICAL (0-9) buttons.  
**  
7.1 Parental Control  
You can set parental control for each programme and watching time. You can also change your  
Password.  
1. Press the MENU  
2. Select the Preferences using the  
press the OK or button.  
3. Select the Parental Control using the  
press the OK or button.  
button.  
button, and  
button, and  
4. When a prompting message is displayed to request your  
password, enter the password using the NUMERICAL  
(0-9) button.  
**  
1. Setting Censorship  
Censorship Classification allows you to block programmes according to the age level you have  
set.  
1. Select the Censorship Classification using the  
button, and press the OK  
2. Select your desired age level using the  
press the OK button.  
or button.  
button, and  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 35  
**  
7. Setting Preferences  
**  
View All  
All programmes can be watched because there is no age limitation.  
7
Programmes are blocked for children under the age of 7.  
Programmes are blocked for children under the age of 12.  
Programmes are blocked for children under the age of 15.  
Programmes are blocked for children under the age of 18.  
Programmes are blocked without considering the age level.  
12  
15  
18  
Lock All  
Note: You have to enter Password to watch the programme which is blocked by the age level.  
**  
2. Setting Allow Watch Time  
You can block programmes according to the watching time for all the channels.  
1. Select the Allow Time Control using the  
and press the or OK button.  
2. Select Enable or Disable the Allow Time Control using  
the button, and press the or OK button.  
button,  
**  
Disable You can watch whenever you want regardless  
of Allow Time.  
Enable You can watch only while the time specified by  
Allow Time.  
3. When you have selected Enable, set the Start and End  
Time using the NUMERICAL (0-9) buttons, and press the  
OK  
4. If you wish to cancel the entered time, select the Cancel  
button, and press the OK button.  
button.  
Note: Once the setting has been completed, you can watch programme only while the time  
specified by Allow Time. Or you should enter the Password to watch any programme  
during unspecified time.  
GB 36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
3. Change Password  
You can change the existing Password into new one.  
1. Select Change Password using the  
press the or OK button.  
2. Enter New Password using the NUMERICAL  
(0-9)button, and press OK button.  
3. Enter the New Password again to confirm the Verify  
Password, and press the OK button.  
button, and  
Note: The Default Password is "0000". If you have forgotten  
your Password, please contact your local product  
distributor.  
7.2 Language Setting  
You can set Language for Menu, Audio, and Subtitle.  
1. Press the MENU  
2. Selec Preferences using the  
OK or button.  
3. Select Language Setting using the  
press the OK or button.  
button.  
button, and press the  
button, and  
1. Audio/Subtitle Language  
You can set the language for Audio and Subtitle. Default language is English.  
1. Select Audio/Subtitle Language using the button.  
2. Press the or OK button to display the available Language List.  
3. Select your desired language using the button, and press the OK  
button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 37  
**  
7. Setting Preferences  
**  
2. Subtitle Display  
You can select whether or not to display the Subtitle if provided.  
1. Select Subtitle Display using the  
2. Presse the or OK button to display the Auto or Manual option.  
3. Select your desired option and press the OK button.  
button.  
**  
Auto  
Subtitles are displayed automatically in the predefined subtitle language.  
Subtitles are displayed in the language when you select the subtitle language  
Manual  
by pressing the Subtitle  
button at remote control.  
3. Subtitle Font  
**  
You can select the Subtitle font.  
1. Select Subtitle Font using the  
button.  
2. Press the or OK  
button to display the Variable or Fixed option.  
button.  
3. Select your desired option and press the OK  
**  
Variable  
Fixed  
Uses the horizontally variable Subtitle Font.  
Uses the fixed Subtitle Font.  
**  
7.3 Time Setting  
You can specify the current time and Power On/Off time.  
1. Press the MENU button.  
2. Select Preferences using the  
button, and press  
button, and press  
the OK or button.  
3. Select Time Setting using the  
the OK or button.  
GB 38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
1.Setting Current Time  
You can set the GMT Offset for current time.  
1. Select GMT Offset using the  
button.  
2. Press the or OK  
button to display GMT list. GMT  
is changed by from 30 minutes to 1 hour.  
3. Select your GMT offset using the  
the OK button.  
buttons, and press  
Note:  
•
•
The current time is set automatically whenever GMT Offset changes.  
The default item is Auto. If GMT Offset is Auto, it is automatically set depending on your  
country.  
2. Power On  
You can set the time when the product is automatically powered on.  
1. Select Power On using the  
the or OK button.  
button, and press  
2. Select either Enable or Disable the Power On  
Control.  
**  
Enable  
Uses the Power On Control and sets the  
Power on time.  
Disable  
Not uses the Power On Control.  
3. If Enable has been selected, enter the Channel No  
and Time using the NUMERICAL (0-9) buttons,  
and press the OK  
button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 39  
**  
7. Setting Preferences  
**  
3. Power Off  
You can set the time when the product is automatically powered off.  
1. Select Power Off using the  
button, and press the or OK  
button.  
2. Select either Enable or Disable the Power Off using the  
button, and press the OK  
button.  
**  
Enable  
Disable  
Uses the Power Off and sets the Power Off time.  
Not uses the Power Off.  
3. If Enable has been selected, enter the Time using the NUMERICAL (0-9) buttons, and press  
the OK button.  
Note: Once Power On/Off is specified, it is repeated everyday.  
7.4 Schedule  
You can reserve a programme to watch programme at your desired time.  
1. Press the MENU  
2. Select Preferences using the  
press the OK or button.  
3. Select Schedule using the  
the OK or button.  
button.  
button, and  
button, and press  
4. Reserved Pregoramme List is displayed on the  
screen. To edit the existing reservation, select your  
desired reservation, and press the OK  
To add a new reservation, select a blank list and  
press the OK button.  
button.  
Note: For detailed information about Schedule, refer to Chapter 6.3 Viewing Reserved  
Programme.  
7.5 A/V Control  
You can set Audio or Video Output Control.  
1. Press the MENU  
2. Select Preferences using the  
the OK or button.  
3. Select AV Control using the  
OK or button.  
button.  
button, and press  
button, and press the  
GB 40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
1. TV-SCART/VCR-SCART  
You can set TV/VCR-SCART Output.  
1. Select TV-SCART or VCR-SCART  
2. Select one option using the  
button, and press the OK  
button, and press the OK  
or button.  
or button.  
2. Audio Output  
Set the Audio Output.  
1. Select Audio Output  
button, and press the OK  
or button.  
button.  
2. Select one option form Stereo or Mono using the  
3. Screen Ratio  
You can set the aspect ratio of your TV.  
1. Select Screen Ratio  
button, and press the OK  
or button.  
2. Select one option from 4:3 or 16:9 using the  
button, and press the OK  
button.  
button.  
Note: If 2 options are provided, you can switch the option at a time using the OK  
Namely, Whenever you press the OK  
button, Screen Ratio is switched between 4:3  
and 16:9.  
4. Display Format  
You can select the Display Format according to TV Screen Ratio.  
1. Select Display Format button, and press the OK  
2. If the Screen Ratio is set to '4:3', you can select one from 16:9 Letterbox/14:9  
Letterbox/Centre Cutout using the button, and press the OK button.  
3. If the screen ratio is set to ’16:9’,this item will display Disable or Auto.  
or button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 41  
**  
7. Setting Preferences  
**  
7.6 UHF Tuning  
You can set the UHF channel.  
1. Press the MENU  
2. Select Preferences using the  
the OK or button.  
3. Select UHF Tuning using the  
OK or button.  
button.  
button, and press  
button, and press the  
1. UHF Channel  
You can select UHF Channels for the TV. The Channel range and Frequency change according to  
PAL Standard.  
1. Select UHF Channel using the  
2. Select channel range based on the following channel criteria using the  
the OK button.  
button, and press the OK  
or button.  
button, and press  
**  
CH21-CH69  
CH28-CH69  
PAL I/G for Europe  
PAL B for Europe/Australia  
2. PAL  
You can select the channel range and frequency table.  
1. Select PAL using the button, and press the OK  
or button.  
button, and press the OK  
2. Select one option among PAL I/PAL G/PAL B using the  
button.  
3. UHF Offset  
You can adjust fine tuning setting.  
1. Select UHF Offset using the  
button, and press the OK  
or button.  
2. Select a range between -4~+4 using the  
button, and press the OK  
button.  
GB 42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
7.7 Miscellaneous Settings  
1. Press the MENU  
2. Select Preferences using the  
the OK or button.  
3. Select Miscellaneous Settings using the  
button.  
button, and press  
button,  
and press the OK  
or button.  
1. i-Plate Display Time  
You can set the duration during which the Information box is to be displayed when you switch the  
channel.  
1. Select i-Plate Display Time using the  
button, and press the OK  
or button.  
button.  
2. Select a value between 1~20 seconds using the  
button, and press the OK  
Note: When it is set to 'Disable', the i-Plate will not be displayed when you switch the channel.  
2. OSD Transparency  
You can set the transparency of On Screen Display.  
1. Select OSD Transparency using the  
button, and press the OK  
or button.  
2. Select one option among Disable/25/50/75 using the  
button, and press the OK  
button.  
**  
Disable  
Fully opaque screen  
As the number is bigger, the screen is more transparent.  
25, 50, 75  
3. Option in CH List  
You can set the option of scrambled icon in the Option in CH List.  
1. Select the Option in CH List using the  
button, and press the OK  
button, and press the OK  
or button.  
button.  
2. Select one option from On/Off using the  
**  
On  
Off  
Scramble icon display in the channel list.  
Scramble icon disappear in the channel list.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 43  
**  
8. Installation  
**  
This chapter describes how to search for channels and a series of procedures.  
8.1 Automatic Search  
If your receiver is connected to the aerial and television, you can automatically search channels  
without entering any other information.  
1. Select MENU  
2. Select Installation using the  
OK or button.  
3. Select Automatic Search from Installation menu using  
the button, and press the OK or button.  
4. Receiver starts to search channels automatically.  
button.  
button, and press the  
**  
Search  
Wait while the receiver searches for the channels, this may take a few minutes.  
1. During operating search, the cursor is located at Stop  
Therefore, if you press the OK  
button during  
searching, the operation is stopped and the channels  
found until then will be displayed.  
2. If search operation is successfully completed, and the  
channel does not exist, press the OK  
button and try  
to reset the search operation again if necessary.  
3. You can delete unnecessary channels from the searched  
channels. Select your desired channels to delete and  
press the OK  
the OK button. To delete all channels, select Select  
All to select all channels, select Delete, and press the  
OK button.  
button. Then select Delete and press  
4. When completing Channel Search and deleting  
unnecessary channels, select Save to save the changes.  
GB 44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
8.2 Manual Search  
You can search channels manually by searching parameters, if you know the MUX information.  
1. Channel Number  
Enter your desired frequency channel to search. When entering frequency channel value, the  
appropriate frequency value is entered.  
1. Select Channel using the  
OK or button.  
2. Select one of channel using the  
button, and press the  
button, and press  
the OK  
button.  
2. Frequency  
Enter the your desired frequency to search directly. When entering frequency, the appropriate  
channel for the entered frequency is automatically displayed on Channel.  
1. Select Frequency using the  
OK or button.  
2. Enter frequency using the NUMERICAL (0-9) button and  
press OK button.  
button, and press the  
3. Mode  
Required for Channel Search. If you don't know the value, please select Auto.  
1. Select Mode using the  
button, and press the OK  
or button.  
2. Select among Auto, 2k and 8k using the  
and press the OK button.  
button,  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 45  
**  
8. Installation  
**  
4. Guard Interval  
Required for Channel Search. If you don't know the value, please select Auto.  
1. Select Guard Interval using the  
the OK or button.  
2. Select one option among Auto, 1/4,1/8,1/16 and 1/32  
button, and press  
using the  
button, and press the OK  
button.  
5. Network Search  
If specified frequency channel information and other channel information are provided together, the  
channel, which belongs to other frequency channel, is also searched.  
1. Select Network Search using the  
press the OK or button.  
button, and  
2. Select one option between Enable and Disable using the  
button.  
GB 46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
8.3 Default Setting  
Default Setting restores the receiver to the default settings.  
Warning: Please note that once you perform Default Setting, all data such as Channel List, and  
User Configured data are deleted.  
To perform Factory Default:  
1. Press the MENU  
2. Select Installation using the  
OK or button.  
3. Enter Password using the NUMERICAL (0-9) button.  
button.  
button, and press the  
4. Select Default Setting using the  
OK or button.  
button, press the  
5. Select Yes and press the OK  
setting to Factory Default.  
button to restore all  
Select No and press the OK  
or BACK  
button to  
return to the previous menu.  
6. Confirm again to start loading default setting. Enter  
Password using the NUMERICAL (0-9) button to  
perform restoring.  
7. When completing the default setting, press the OK  
button to automatically run the Installation Wizard.  
When default setting is completed, Installation Wizard is  
automatically displayed, which helps Channel Search.  
For detailed information about Installation Wizard, refer to  
3. Installation Wizard.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 47  
**  
9. Software Update  
**  
In order to maintain proper performance of this product, it is essential to have the most up to date  
software. The latest news and release of software versions may be found at Humax website -  
http://www.humaxdigital.com.  
It is recommended that you periodically check for the availability of software upgrade.  
9.1 OTA (Over the Air)  
OTA, an abbreviation of "over the air", means that downloads the software where the manufacturer  
reserves the right to decide when and where to release through aerial.  
Over the Air(OTA) is simply another alternative for downloading software versions. However, the  
manufacturer reserves the right to decide when and where this software update can take place by  
"beaming" latest software versions over the air via aerial. The software update via aerial will only  
occur under the following circumstances.  
1. The equipment should have appropriate loader software.  
Caution: Please note that if you don't have normal loader software, the equipment may  
not be updated or work after software update.  
2. The manufacturer decides to release software downloading via a designated aerial  
3. The equipment must be "tuned" properly to the same aerial that the manufacturer uses.  
4. Update software when the quality of receiving signal strength is high. If the weather is not so  
good that the quality of receiving signal strength is not recommendable, perform the software  
upgrade later.  
**  
Caution:  
•
Please be careful to keep the power on and the power cord plugged in during software update.  
If the power is off during software update, it may cause fatal damage to the product.  
•
Please be careful not to pull out the Signal line (co-axial Cable) during software update.  
Update may be interrupted and the product may not work.  
**  
Note:  
•
•
•
The product cannot work at all during software update.  
It may take 5 ~10 minutes to update software.  
Scheduling operation cannot work during software update.  
1. If new software is found when powering on  
1. A message will be displayed to notify that new software is found.  
2. Select Yes and press the OK  
button to update the software.  
3. Starts downloading new software. Please wait until the updated is completed.  
4. When completing the software update, the equipment is automatically powered off and on  
again.  
GB 48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
2. If updating software from Menu  
1. Press the MENU  
2. Select Installation using the  
OK or button.  
3. Enter Password using the NUMERICAL (0-9) buttons.  
4. Select Software Update using the button, and  
press the OK or button.  
button.  
button, and press the  
**  
3. If new version of software is detected during  
watching a programme  
1. A message will be displayed to notify that new software is  
found.  
2. Select Yes and press the OK  
button to start  
upgrading. Select No and press the OK  
button to  
return to the previous menu.  
Select Later and press the OK  
button to update  
later. That means the update menu display as soon as  
you turn on the receiver next time.  
**  
4. If using Automatic Update  
You can set the product to find HUMAX software update site and update software automatically.  
1. Select Automatic from Software Update Menu screen  
using the  
button, and press the OK  
or  
button.  
2. Automatically search for new software. Select Stop and  
press the OK button to finish Search.  
3. When detecting update software, the following result is  
displayed. If new software is not found by Automatic, use  
Manual Update.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 49  
**  
9. Software Update  
**  
4. Select Yes and press the OK  
updating.  
button to start  
Select No and press the OK  
previous menu without updating.  
Select Later and press the OK  
button to return to the  
button to update  
later. That means the update menu display as soon as  
you turn on the receiver next time.  
5. When completing the software update, the product is  
automatically powered off and on again.  
5. Manual Update  
You can perform Manual Update only if you know MUX information of software update correctly.  
Among the Software Update Sites of HUMAX, the software search operation is performed only for  
the satellites that have been set to Enable in Installation - Antenna Setting - Satellite Alternative  
menu and that have all other Antenna Setting correct.  
1. Select Manual Update from Software Update screen  
using the  
button, and press the OK  
or  
button.  
**  
Select the channel number which provides update  
software. You can also enter the frequency instead of  
channel number in which updated software is provided.  
2. Select Mode. If the information is not known, then Auto  
can be selected.  
3. Select Guard Interval. If the information is not known,  
then Auto can be selected.  
Note: How to setting parameters in Manual Update is  
the same as how to set parameters in Manual  
Search. Refer to Manual Search.  
4. Select Search and Press the OK  
button to search  
software.  
5. It is displayed whether or not New Software exist.  
If new software does not exist, press the OK  
to return to the Manual Update Menu.  
button  
6. Select Yes and press the OK  
button to start  
updating. Select NO and press the OK  
button to  
return to the previous menu.  
Select Later and press the OK  
button to update  
later. That means the update menu display as soon as  
you turn on the receiver next time.  
7. Performs Software Update. Please wait until it is  
completed.  
8. When completing the software update, the product is  
automatically powered off and on again.  
GB 50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
6. Software Auto-Detecting and Time  
You can specify the software detecting time.  
If the receiver powers on during software auto-detecting, Detecting will stop.  
1. Select Software Auto-Detecting from Software Update screen using the  
button.  
2. Select Enable or Disable using OK  
or button whether or not setting the software  
detecting time automatically.  
3. When you select Enable, you can set the detecting time in the Auto-Detecting Time.  
9.2 S/W Update from PC  
You can connect your receiver to the PC directly and update your software by transferring the new  
software from the PC. Follow these steps to download new software from PC to this product.  
1. Download new software file (HDF files) equivalent for this product model from our website into  
your computer(http://www.humaxdigital.com).  
2. Download and install download tool file from our website into your computer.  
3. Connect your PC to this product with RS-232C serial cable.  
4. Execute installed download tool, and then follow the instructions contained the download tool.  
5. Press the STANDBY  
button to make this product operating.  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 51  
**  
10. System Information  
**  
You can view all system information, signal strength and quality.  
1. Press the MENU  
button.  
2. Select System using the  
button, and press the OK  
or button.  
10.1 Status  
You can view System information  
1. Select Status using the  
button, and press the OK  
or button.  
2. Confirm the information about Hardware version,  
Software version, Loader version, Update Date and  
System ID.  
10.2 Signal Detection  
You can view the signal strength and signal quality receiving for the channel that is currently on AV.  
1. Select Signal Detection using the  
press the OK or button.  
button, and  
2. Displays the channel name, frequency, mode, and guard  
interval of terrestrial frequency, and currently tuned  
channel number and its name, which current channel  
belongs to and the graphs and percentage of Signal  
Strength and Quality of the channel.  
GB 52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
11. Games  
**  
This product provides various games for user's entertainment.  
1. Press the MENU  
2. Select Games using the  
3. According to the instruction displayed on screen, you can enjoy the game using  
and OK button.  
Note: Press the EXIT  
button.  
button, and press the OK  
or button.  
or BACK  
button to exit the game.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 53  
**  
12. Manipulating your TV using Remote Control  
**  
You can manipulate TV using the remote control provided by Humax.  
Note: This function may not be supported depending on TV model.  
TV code setting  
Note: While you are setting TV code, please keep pressing TV button.  
1. Point remote control towards the remote control receiving parts of TV.  
2. Press the TV  
button, and the TV button LED blinks once.  
Keep pressing TV button for 3 seconds, then TV button LED turn on.  
Press three numbers of TV code using the NUMERICAL (0~9) button orderly.  
Refer to the following Code for TV manufacturer.  
3. TV button LED blink twice when you detach your finger from the TV button.  
4. TV power turns on or off when the setting is completed.  
**  
[Code for TV manufacturer] Table  
**  
Brand  
Code  
Brand  
Code  
A MARK  
ABEX  
002  
ARCAM  
062,063  
016  
ARCHER  
ASUKA  
002  
ACTION  
ACURA  
110,124  
064,071  
004  
ATLANTIC  
AUDINAC  
AUDIOSONIC  
AUDIOVOX  
AUMARK  
AUTOVOX  
BARCO  
098  
ADMIRAL  
ADYSON  
AIKO  
030,042,076,099,123  
016,063  
081  
018,071  
029  
002,029,052,084  
AKAI  
015,099,109,124  
064,071  
026  
AKURA  
068,076,097  
ALARON  
ALBA  
051,055,062  
004,017,018,064,123  
118  
086  
BASIC LINE  
BAUR  
004,064  
ALLORGAN  
AMBASSADOR  
AMPLIVISION  
AMSTRAD  
ANAM  
018,087,097,099,102,108  
049  
BAYSONIC  
BEAUMARK  
BEC  
052  
063  
050  
004,018,047,049,145  
003,004,052  
099,110,124  
040,099,108,109,110  
009  
BECRESE  
BELCOR  
ANAM NATIONAL 024  
ANITECH  
ANITECH  
ANSONIC  
AOC  
004,071  
BELL & HOWELL 006,038,106  
071  
BEON  
018  
063  
040  
127  
BINATONE  
BLACKSTRIPE  
002,009,015,056  
GB 54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
Brand  
Code  
106  
Brand  
Code  
BLACKSTRIPE  
BLACKSTRIPE  
BLAUPUNKT  
BLUE SKY  
BLUE STAR  
BOOTS  
CIE  
133  
108  
CIMLINE  
CINERAL  
CITIZEN  
004,117  
029,084  
059,060,061  
064  
015,019,025,026,029,040,  
057,074  
075  
063  
CLAIRTONE  
CLARIVOX  
CLARIVOX  
CLATRONIC  
CLATRONIC  
CME  
056  
018  
125  
098  
127  
BOSCH-BAUER  
BPL  
098  
075  
BRADFORD  
BRINKMANN  
BRITANNIA  
BROCKWOOD  
BROKSONIC  
BROTHER  
BRUNS  
052  
123  
062  
004,005,017,018,028,042,  
049,063,065,066,068,076,  
079,087  
009  
002,067,085  
071  
CONCERTO  
CONDOR  
CONIC  
025  
098  
126  
110  
BSR  
093,118  
064  
CONTEC  
004,017,052,056,062  
BTC  
CONTINETAL  
EDISON  
141  
BUSH  
004,017,018,064,075,093,  
099,117  
052  
CRAIG  
105  
CANDLE  
CAPEHART  
CAPSONIC  
CARNIVALE  
CARREFOUR  
CARVER  
CASCADE  
CATHAY  
CCE  
015,025,057  
124  
CRIPTOVISION  
CROSLEY  
CROSLEY  
CROWN  
023  
110  
071  
004,018,019,052,127  
098  
015  
017  
CTC  
006,015,019,020,021,023,  
023,046  
004  
CURTIS MATHES 026,030,035,038, 25,040,  
044,084,106  
018  
CXC  
052  
064  
063,018,078  
115  
CYBERTON  
DAEWOO  
CCI  
004,009,018,019,029,084,  
133  
CENTURION  
CGE  
018  
101,123  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 55  
**  
12. Manipulating your TV using Remote Control  
**  
Brand  
Code  
Brand  
Code  
DAINICHI  
DANSAI  
064  
EUROPHON  
FERGUSON  
FIDELITY  
FINLADIA  
FINLUX  
127  
018  
018  
DAYTON  
DE GRAAF  
DECCA  
004,009,019,108  
062,097,104  
106  
066  
018,028,129  
018,028,051,093,129  
118,004,062,063  
DENON  
035  
FIRST LINE  
FISHER  
DESMET  
DIXI  
098  
038,041,063,097,106,  
108,126  
003,004,018,126  
DUAL  
097  
FORMENTI  
FRONTECH  
FUJITSU  
FUNAI  
018,098,103  
042,071,099  
028,051,124  
047,051,052,071,118  
052  
DUAL TEC  
DUMINT  
DUMONT  
DYNATECH  
EB TELECOM  
ECTEC  
063  
127  
007,009  
063  
FUTURETECH  
GALAXIS  
GBC  
105  
123,142  
081  
099  
ELBE  
116  
GE  
011,013,020,021,024,030,  
034,050,075,084  
ELECTROBAND  
056  
ELECTROHOME 080,106,110  
EC  
018,028,063,095,110,129  
004,099  
ELEKTA  
ELIN  
071  
GELOSO  
GENEXXA  
GIBRALTER  
GO VIDEO  
GOLDSTAR  
018  
042,064  
ELITE  
040,064,098,106  
007,009,015  
026  
ELMAN  
ELTA  
127  
004  
000,001,009,015,016,018,  
019,025,033,050,063,  
071,093,110,124,140  
EMERSON  
009,019,038,049,050,051,  
051,053,054,055,056  
067,072,074,075,085  
GOODMANS  
GPM  
017,018,028,051,063,133  
ENVISION  
ERRES  
015  
018  
071  
064  
GRADIENTE  
GRADIN  
022,025,046,082  
098  
EURO-FEEL  
EUROMANN  
071  
GRAETZ  
042,099  
**  
**  
GB 56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
Brand  
Code  
Brand  
Code  
GRANADA  
GRANDIN  
GRUNDIG  
GRUNPY  
018,028,063,109,124  
INFINITY  
INGEKEN  
INGELEN  
INNOHIT  
INNOVA  
INTEQ  
023  
075  
139  
018,059,060,068,137  
042  
051  
052  
071  
050  
028,124  
GRUNPY  
018  
HALIEAX  
007  
HALLMARK  
HANSEATIC  
INTERBUY  
INTERFUNK  
INTERVISION  
ISUKAI  
ITT  
071  
018,089,097,098,099,  
118,119  
018,042,095,099  
018,063,071,127,144  
064  
HARLY DAVIDSON  
HARMAN KARDON  
HARVARD  
051  
042,099,108  
023  
JACSON  
JBL  
129  
052  
023  
HCM  
004,071,075  
097  
JCB  
137  
HEMMERMANN  
HINARI  
JEC  
040  
004,017,018,051,064  
JVC  
017,022,045,054  
HITACHI  
094,095,096,099,102,  
108,109,110,111,112,  
113,114,124,148,016,  
017,025, 031,032,035,  
037,042,048,063,066,  
090,091  
KAISUI  
KAMP  
004,062,063,064,075  
062  
KAPSCH  
KATHREIN  
KAWASHO  
KEC  
042,095,099  
089  
HUANYU  
062  
062,077  
HUSPI ELEKTRONIK 123  
052  
HYPERVISION  
HYPSON  
HYPSON  
ICE  
134  
KENDO  
KENWOOD  
KINGSLEY  
KLH  
018,099,117,119,127,  
018,071,075  
071,075  
063,071  
064  
009,015  
062  
124  
ICES  
KLOSS  
KMC  
012  
IMPERIAL  
INDESIT  
INDIANA  
092,099,101,123  
068  
033  
KONIG  
004,005,017,018,042,061,  
068  
018  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 57  
**  
12. Manipulating your TV using Remote Control  
**  
Brand  
Code  
018  
Brand  
Code  
KORPEL  
KORTING  
KOYODA  
KTV  
MEDIATOR  
MEGATRON  
MEI  
018  
098  
002,035,050,109  
056  
004  
015,019,052,055,056,  
063,074  
MEMOREX  
004,006,025,026,033,036,  
038,050,070,071,106  
KUBA  
ELECTRONIC  
097  
MEMPHIS  
MGA  
124  
071,133,146,018,028,  
071,118,124  
009,015,036,039,050  
LENCO  
MIDLAND  
MINERVA  
MINUTZ  
007,016,019,020,021,034  
068  
011  
LG  
025  
LIESENK & TTER  
LIFETEC  
LLOYTRON  
LOGIK  
018  
MITSUBISHI  
009,017,030,036,039,050,  
068  
071  
016  
000,006  
MIVAR  
062  
LUMA  
099  
MOTOROLA  
MTC  
024,030  
LUXMAN  
LUXOR  
LXI  
025  
009,015,025,026,056,062  
068,094,099,102,124  
MULTISTANDARD 127  
007,020,023,038,040,  
050,106  
MULTITECH  
MUTIMEDIA  
NAD  
004,052,062,063,099,127  
132  
040,044,050  
M ELECTRONIC  
MAGNAFON  
004,018,042,063,097,127  
NAONIS  
NATIONAL  
NEC  
099  
127  
106  
068  
MAGNASONIC  
MAGNAVOX  
009,015,017,025,046  
010,012,014,015,017,  
023,051,057,058,110  
NECKERMANN  
NEI  
018,059,087,089,099,102  
018  
051  
018  
MAJESTIC  
MANDOR  
MANESTH  
MARANTZ  
MARK  
006  
NESCO  
071  
NETSAT  
NIKKAI  
063,071,098,117  
015,018,023,089  
018  
016,018,028,040,062,064,  
071124  
NIKKO  
007,015,020,029,038,040,  
050  
MATSUI  
004,005,018,049,063,  
092,097,117  
NISATO  
NOBLEX  
081  
083  
MATSUSHITA  
MC MICHAEL  
021,070  
110  
GB 58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
Brand  
Code  
Brand  
Code  
NOKIA  
071,094,095,096,099,106,  
108,143  
PCE/PEC  
PENNEY  
040,106,108  
001,102,008,009,011,013,  
015,016,019,020,021,  
025,026,034,040,050  
NOSHI  
008  
NTC  
029  
PHASE  
PHILCO  
016  
OCEANIC  
ONWA  
042,099,106,118  
052  
009,010,012,014,015,023,  
035,057,058,085,123  
OPTIMUS  
OPTIONICA  
ORION  
038,044,070  
030,043  
PHILIPS  
007,008,009,010,011,012,  
013,014,018,019,023,  
089,110,124,138,  
018,049,051,067,085,097,  
098,118  
PHONOLA  
PILOT  
018,098  
009,015,019  
042,044  
068  
OSAKI  
OSAKI  
OSAKI  
OSAKI  
OSAKI  
OSAKI  
OSO  
016  
028  
PIONEER  
POLICOM  
POLYRON  
PORTLAND  
063  
064  
071  
071  
009,019,029  
124  
PRANONI PRINCE 099  
064  
PRIMA  
040,106  
OSUME  
016,028,124  
PRINZ  
124  
OTTO VERSAND 017,018,059,063,087,089,  
093,097,098,099,102,  
PRISM  
021  
108,117,118  
PROFEX  
PROLINE  
PROSCAN  
PROTEC  
PROTECH  
PROTON  
PULSAR  
QUASAR  
**  
004  
119  
PALLADIUM  
PANAMA  
099  
015,020  
063,071  
099,127  
PANASONIC  
000,020,021,022,023,024,  
026,030,035,036,038,  
040,042,043,050,065,  
068,070,079,099  
004,018,063,071,  
002,050  
007,009,110,124,  
021,024,043,070,  
**  
PATHE CINEMA  
PAUSA  
062,098  
004  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 59  
**  
12. Manipulating your TV using Remote Control  
**  
Brand  
Code  
Brand  
Code  
QUELLE  
005,018,087,093,097,099,  
108,117,118  
SAMSUNG  
004,009,015,016,018,019,  
025,026,050,063,071,  
078,089,124,137  
QUESTA  
017  
SAMSUX  
SANDRA  
SANSEI  
SANSUI  
SANYO  
019  
062  
084  
085  
RADIO SHACK  
009,015,016,019,020,025,  
038,043,050,052,106  
RADIOLA  
RADIOTONE  
RADIX  
018  
071  
005,017,028,038,041,106,  
107,108,124,129  
108  
RANK ARENA  
RCA  
017  
SBR  
018  
008,009,020,021,030,034  
SCHAUB LORENZ 099  
REALISTIC  
009,015,016,019,025,038,  
043,050,052,106  
SCHNEIDER  
018,064,071,097,136,143,  
147  
REKORD  
REVOX  
REX  
149  
SCIMITSU  
SCOTCH  
SCOTT  
009  
018  
050  
042,071,076,099,  
009,050,051,052,067  
RFT  
088,126,  
SEARS  
020,023,025,038,040,041,  
047,050,051,106  
RHAPSODY  
R-LINE  
055,056,062  
018  
SEG  
017,063,071,126,127  
049  
ROADSTAR  
ROYAL LUX  
RTF  
004,064,071  
SEI  
131  
SEI-SINUDYNE  
SELECO  
097,099,117,118,127  
018  
042,076,099,100,119,120,  
122,  
RUNCO  
SABA  
007,015  
042,095,099  
SEMIVOX  
SEMP  
052  
SAGEM  
SAISHO  
SAKIO  
139  
040  
004,005,049,071,117  
SENTRA  
SHARP  
040  
071  
017,019,030,043  
SALORA  
SAMBERS  
SAMPO  
042,094,099,102,106,124  
127  
SHOGUN  
SHORAI  
009  
118  
015,016,019  
GB 60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
Brand  
Code  
Brand  
Code  
SIAREM  
127  
SUPRA  
SUSUMU  
025  
SICATEL  
121  
064,010,012,014,015,023,  
057,058,080  
SIEMENS  
SIGNATURE  
SILVER  
018,059,060,061  
006,040  
SYMPHONIC  
SYSLINE  
047  
017  
018  
SIMPSON  
SINGER  
057,058  
TADNDY  
124  
127  
TANDY  
028,030,042,063,064  
SINUDYNE  
SKANTIC  
SKY  
049  
TASHIKO  
TASHKO  
110  
099  
017,063  
018  
TATUNG  
002,018,024,028,063,124  
SOGERA  
SOLAVOX  
SOLAVOX  
SONITRON  
SONOKO  
SONOLOR  
SONTEC  
098  
TEC  
063,133  
016  
TECHLINE  
TECHNEMA  
TECHNICS  
TECHNISAT  
TECHNOL ACE  
TECHWOOD  
TEKNIKA  
127  
042  
098  
108  
007,020,021,070  
130  
004,018,071  
042  
051  
018  
002,021,025  
SONY  
005,017,073,087  
006,009,019,023,025,026,  
029,036,051,052,057  
SOUND&VISION  
SOUNDESIGN  
SOUNDWAVE  
SPECTRA  
SPECTRICON  
SQUAREVIEW  
SR2000  
127  
050,051,052,057  
TELECO  
135  
018  
TELEFUNKEN  
TELEMEISTER  
TELETECH  
TELETON  
TELEVIDEON  
TENSAI  
025  
133  
098  
002  
004  
047  
017,057,063,099  
106  
098  
SSS  
009,052  
004,063,064,098  
052  
064,093,098,118  
STANDARD  
STARLITE  
STERN  
TESLA  
135  
TEXET  
062,064  
110  
042,076,099  
117,118  
THOMAS  
SUNKAI  
THOMAS  
124  
SUPERTECH  
097  
THOMSON  
068  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 61  
**  
12. Manipulating your TV using Remote Control  
**  
Brand  
Code  
Brand  
Code  
THORN  
018,028,040,087,107,  
108,110,112,128,129  
VIDEOTON  
VIDIKRON  
VIDTECH  
VISA  
094  
023  
009,017,050  
TMK  
025,049,050  
124  
004,005,017,018,042,068  
TOKAI  
VISION  
098  
TOMASHI  
TOSHIBA  
075  
VOXSON  
VTQ  
042,099  
126  
017,026,038,040,069,  
106,108  
WALTHAM  
WARDS  
063,094,099  
TOSONIC  
056  
006,009,010,011,013,014,  
015,023,025,034,040,  
043,050,051,058  
TOTEVISION  
TOWADA  
019  
099,127  
049,069  
089  
TRIUMPH  
WATSON  
WATT RADIO  
WEGA  
018,098  
TV TEXT  
097,127  
UHER  
098  
017  
UHER  
127  
WHITE  
WESTINGHOUSE  
018,062,098,106  
ULTRA  
081,124  
127  
ULTRAVOX  
UNIVERSAL  
UNIVERSAL  
UNIVERSUM  
VECTRO RESEARCH  
VESTEL  
WORLD-TECH  
YAMAHA  
YOKO  
133  
011  
009,015  
018,063,071,133  
108  
013  
018,071  
015  
YORK  
ZANUSSI  
ZENITH  
076,099  
006,007,029  
018  
VICTRO  
012  
ZONDA  
002  
VIDEOTECHNIC  
013  
**  
**  
GB 62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
13. Menu Map  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 63  
**  
14. Trouble Shooting  
**  
14.1 Trouble Shooting  
Before contacting your local service, please make sure following instructions. If the product does not  
work normally after completing the following trouble shooting, please contact your local product  
distributor or service center.  
1. No message is displayed on the front panel or product has no power  
- Check the main power cable and check that it is plugged into a suitable power outlet.  
- Check whether Power Switch is On.  
2. No picture  
- Make sure that the product is in Operation Mode.  
- Make sure that the AV Cable is firmly connected to the TV.  
- Make sure that aerial line is correctly connected to the equipment.  
- Check the brightness level of TV.  
- Check the channel is on air.  
3. Poor picture & sound quality  
- Install aerial where there is not obstacle ahead.  
- Make sure to avoid putting mobile phone or mircrowave oven near around the equipment.  
- Use 75 coaxial cable to connecting TV and aerial.  
4. No or poor sound  
- Check the volume level of the TV.  
- Check the Mute status of the TV and product.  
- Press the Audio button to change the Sound Track type.  
5. Remote control does not operate  
- To manipulate the equipment with remote control, the remote control's emitting part should  
directly point towards the receiving part of receiver's remote control.  
- Check the battery of Remote control.  
6. Reservation is unavailable  
- Check whether it it not overlapped with other reservation.  
- Check whether the power switch is off.  
GB 64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
14.2 Error Message  
Error message  
No or bad signal  
Possible causes  
What to do  
Adjust aerial.  
The aerial is not pointing properly.  
Check the cable from the aerial.If you  
cannot resolve the problem you may  
need to have your aerial and  
installation tested by a professional.  
The channel is  
scrambled or not  
available.  
The channel has signal, but no audio Confirm if the channel is currently on  
or video.  
air.  
The channel is not deleted by  
broadcasting company.  
The channel is for data broadcasting. Cannot watch the channel in usual  
way.  
The channel is  
scrambled.  
This digital terrestrial receiver does  
not support the service that enables to  
descramble the scrambled channels.  
The audio is not  
available.  
The channel has signal, but no Audio. Press the Audio button to confirm if  
the channel has Audio.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 65  
**  
15. Specification  
**  
Tuner & Channel  
Input Connector  
IEC-Type, IEC 169-24, Female  
IEC-Type, IEC 169-24, male  
RF Loop through Output connector  
Frequency Range  
48.5MHz to 226.5MHz (VHF)  
470MHZ to 862MHz (UHF)  
Signal Level  
Demodulation  
Mode  
-10 to -70dBm  
OFDM  
2K, 8K  
FEC mode  
Guard Intervals  
1/2, 2/3, 3/4, 5/6 & 7/8  
1/4, 1/8, 1/16 & 1/32  
MPEG Transport Stream A/V  
Decoding  
Transport Stream  
Profile Level  
MPEG-2 ISO/IEC 13818  
MPEG2 MP@ML  
Input Rate  
15 Mbit/s Max  
Aspect Ratio  
Video Resolution  
Audio Decoding  
Audio Mode  
4:3, 16:9 Letter box  
720 x 576  
MPEG/MusiCam Layer I & II  
Single /Dual mono/ Stereo /Joint stereo  
GB 66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
Memory  
Flash Memory  
Graphics (MPEG) & System Memory  
EEPROM  
4 Mbytes  
16 Mbytes  
8 Kbytes  
RF-Modulator  
RF/Loop-through Output Connector  
Frequency  
75 , IEC 169-2  
470 ~ 862 MHz  
CH 21 ~ 69  
PAL I/G/B  
Output Channel  
TV standard  
Preset Channel  
A/V & Data In/Out  
Video  
CH 36  
1 Output RCA  
Audio R/L  
2 Output RCA  
RS-232C  
Transfer Rate: 115,200 bps, 3 pin Socket type  
Power Supply  
Input Voltage  
AC 90 ~ 250V, 50/60Hz  
Type  
Switching Mode Power Supply (SMPS)  
Power Consumption  
Operation mode : Max. 11 W  
Stand-by mode : Max. 7.5 W  
Protection  
Separate internal fuse & Lightning protection  
Physical Specification  
Size  
260 mm X 50 mm X 182 mm  
1.2 kg  
Weight (Net)  
Operating Temperature  
Storage Temperature  
0
to +45  
to +70  
-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 67  
**  
16. Glossary  
**  
Aerial  
A device that collects and amplifies electromagnetic waves. Also called "Antenna"  
**  
Coaxial cable  
A specially designed and shields cable that can transport signals with high frequency.  
**  
Frequency  
The number of cycles or events per one second, which is expressed in the unit of hertz  
**  
FTA (Free- To-Air)  
An unscrambled broadcast, which you can view without additional payments to a service provider.  
**  
MUX  
The transmitter/frequency/channel where the programme provider/operator transmit a package of  
digital channels/services. Usually there are several MUX frequencies with different or same content.  
**  
Network  
The collection of channels/services that a programme provider/operator offer. These services may  
be transmitted from one or several MUXes. In the transmitted data stream the operator may transmit  
a service information table(network information) that is informing the digital terrestrial receiver about  
all available services in the network  
**  
OSD (On Screen Display)  
The function that displays the information about the monitor that the user needs or has to know on  
the screen directly. OSD information includes brightness, contrast, tuning, RGB adjustment, and  
screen size and positions (top, left, width, and height), and so on.  
**  
OTA (Over The Air)  
Means that software downloads where the manufacturer reserves the right to decide when and  
where to release them through aerial.  
**  
SCART  
A 21-pin connector used for connection of this product, VCR and TV. Also called Euroconnector or  
Peritel connector.  
GB 68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
17. Service and Support  
**  
You can get information such as a troubleshooting guide, software upgrades and product support  
guide from the following web sites and call center (Hotline).  
Please try to contact to your local dealers first when you have any problem.  
Web site and e-mail  
Homepage  
http://www.humaxdigital.com  
English  
Deutsch  
Arabic  
http://www.humaxdigital.com/Deutsch/  
http://www.humaxarabia.com  
**  
HCSA (Humax Customer Service Area)  
Software Download, Information and Technical Q&A  
http://www.humaxdigital.com/hcsa/  
English  
http://www.humaxdigital.com/Deutsch/hcsa/  
Deutsch  
**  
E-mail (Technical Q&A)  
[email protected]  
[email protected]  
Europe & North Africa  
Germany  
[email protected]  
[email protected]  
Middle East  
Asia & Other area  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB 69  
**  
17. Service and Support  
**  
Call Center  
Humax Middle East Call Center (Dubai, UAE)  
Tel: +971 (0)4 359 2323 (Open: 9:00 - 20:00 / close on Friday)  
E-mail: [email protected]  
Open: Local Time in Dubai (GMT+4)  
9:00 - 20:00 (Saturday - Thursday, close on Friday)  
Support Language: English/Arabic  
**  
Humax Hotline (Germany)  
Germany: 01805 778 870 ( 0,12/Min)  
Other Countries: + 49 1805 778 870 ( 0,12/Min+ International Call Charge)  
Open: Local Time in Germany (GMT+1)  
8:00 - 20:00 (Monday - Friday)  
8:00 - 18:00 (Saturday)  
Support Language: Deutsch/English  
**  
Humax BTCI Hotline (Premiere Model)  
Germany: 01805-778900 ( 0,12/Min)  
Austria: 0900-900633 ( 0,33/Min)  
**  
For hardware repair, please refer to support website. (Homepage or HCSA)  
GB 70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Baby Swing 1420 User Manual
Graham Field Thermometer 1858 User Manual
Grindmaster Hot Beverage Maker P400ESHP User Manual
Grizzly Saw G0504 User Manual
Haier Blender HFP400SS User Manual
Harbor Freight Tools Log Splitter 40318 User Manual
Honeywell Barcode Reader 7820 User Manual
IBM Laptop 92P1559 User Manual
Impex Home Gym CB 339 User Manual
Impex Home Gym MP 1100 User Manual