PROPANE TORCH
MODEL 91033
ASSEMBLY AND OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Copyright 2003 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
Download from Www.Somanuals.com. All Manuals Search And Download.
are impaired while taking drugs. If there is any doubt, do not attempt to use this
product.
5.
6.
Use eye and hand protection. Wear ANSI approved safety impact eye goggles
and flame retardant gloves when using this product. ANSI approved safety
impact eye goggles and flame retardant gloves are available from Harbor Freight
Tools.
Dress safely. Do not wear loose clothing or jewelry, as they can become caught
in moving parts or come in contact with open flames. Wear a protective hair
covering to prevent long hair from becoming caught in moving parts or coming in
contact with open flames.
7.
Do not overreach. Keep proper footing and balance at all times to prevent
tripping, falling, back injury, etc.
8.
9.
Industrial applications must follow OSHA requirements.
Stay alert. Watch what you are doing at all times. Use common sense. Do not
use this product when you are tired or distracted from the job at hand.
10.
Check for damaged parts. Before using this product, carefully check that it will
operate properly and perform its intended function. Check for damaged parts
and any other conditions that may affect the operation of this product. Check
hose for cracking or other damage. Replace or repair damaged or worn parts
immediately.
11.
12.
13.
Replacement parts and accessories: When servicing, use only identical re-
placement parts. Only use accessories intended for use with this product. Ap-
proved accessories are available from Harbor Freight Tools.
Maintain this product with care. Keep this product clean and dry for better and
safer performance. For your safety, service and maintenance should be per-
formed regularly by a qualified technician.
Use the right tool for the job. Do not attempt to force a small tool to do the
work of a larger industrial tool. There are certain applications for which this tool
was designed. (See General Application section on page 2). It will do the job
better and more safely at the capacity for which it was intended. Do not modify
this tool, and do not use this tool for a purpose for which it was not intended.
14.
WARNING! The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations that may occur. The
operator must understand that common sense and caution are factors, which
cannot be built into this product, but must be supplied by the operator.
SKU 91033
PAGE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS
1.
Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding work space. Always keep the area free of obstruc-
tions, grease, oil, trash, and other debris. Do not use the Propane Torch in areas
near flammable chemicals, dusts, and vapors. Be aware of wind blown sparks.
Do not use the Propane Torch around or near buildings and structures.
2.
3.
4.
The Propane Torch is for outdoor use only. Use the Propane Torch only in
well ventilated areas. Inhalation of propane fumes may result in carbon monox-
ide poisoning, injury and/or death.
Before each use, always check all propane connections and joints to make
sure no leaks are present. Check hose for cracks or any signs deteriora-
tion.
If while using the Propane Torch you notice the odor of propane, immedi-
ately shut off the propane fueling the Torch. Extinguish all open flames, and
carefully check for leaks by using soapy water. Never use a flame to check for
leaks. If the odor continues, do not use the Torch. Call your local propane sup-
plier for assistance.
5.
6.
Propane fuel is extremely flammable and under pressure. Do not store
propane fuel in temperatures exceeding 120 degrees fahrenheit. Keep the
propane cylinder upright when using and storing. Never puncture or set fire to an
empty propane cylinder. Contact local solid waste authorities for instructions on
correct disposal or recycling of a propane cylinder.
Do not aim the Propane Torch’s Burner (1) at yourself, others, or animals.
Keep spectators clear of the work area.
7.
8.
Maintain a firm grip on the Propane Torch while in use.
Never reach across the Propane Torch while in use. Be aware that parts of
the Propane Torch become extremely hot during operation.
9.
Always allow sufficient time for the Propane Torch to completely cool down
before storing. Do not store flammable liquids or materials in the area
surrounding the Propane Torch.
10.
Maintain labels and nameplates on the Propane Torch. These carry impor-
tant information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
SKU 91033
PAGE 4
Download from Www.Somanuals.com. All Manuals Search And Download.
11.
12.
Never use gasoline, kerosene, or other highly volatile fluids as a starter as
they can explode.
Dress safely. Do not wear loose clothing such as hanging shirt tails and coats.
Wear a protective hair covering to keep long hair away from heat and flames.
Use ANSI approved safety impact goggles and flame retardant gloves to avoid
burns.
13.
14.
Never leave the Propane Torch unattended once it is lit.
Keep a fire extinguisher handy. Always keep a commercial fire extinguisher
nearby the Propane Torch in case of accidental fire.
15.
Do not clean the Propane Torch with cleaners that are combustible or cor-
rosive.
16.
17.
Do not paint any part of the Propane Torch.
Make sure the Hand Wheel (6) is turned to its “OFF” position and the pro-
pane tank (not included) is removed when the Propane Torch is not in use.
18.
19.
Do not use the Propane Torch in the rain.
Never smoke while using the Propane Torch. Make sure all surrounding
flames are extinguished.
20.
Never use a propane tank if it shows signs of: Dents, corrosion, gouges,
bulges, fire damage, leakage, excessive rust, or any other form of visual external
damage.
21.
22.
When work is complete, only set the Propane Torch on a non-flammable sur-
face like concrete, until the tool is completely cool to the touch.
WARNING! The brass components of this product contain lead, a chemical
known to the State of California to cause birth defects (or other reproductive
harm). (California Health & Safety Code 25249.5, et seq.)
23.
WARNING! This product, when used with propane fuel, produces chemicals
known to the State of California to cause cancer and birth defects (or other repro-
ductive harm). (California Health & Safety Code 25249.5, et seq.)
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List (page 8) are
included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
SKU 91033
PAGE 5
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT FEATURES
1.
The Propane Torch is ideal for de-icing, removing paint (only from non-flammable
surfaces), removing weeds (only in a controlled, safe environment, and softening as-
phalt for removal or patching. In addition, the Propane Torch easily attaches to standard
20 Lbs., Barbeque L.P. (propane) tanks (not included).
ASSEMBLY AND OPERATING INSTRUCTIONS
NOTE: For additional references to the parts listed in the following pages, refer to the
Assembly Diagram (page 8).
NOTE: Always check the hose for cracking or other damage. Never use a damaged
hose.
1.
Prior to use, the Hose (21) must be attached to the Propane Torch. To do so,
wrap about 3” of pipe thread tape (not included) around the male threads of the
Hose Connector (12). Then, use the accessory 19MM Open End Wrench to
firmly tighten the Handle Connector (23) onto the Hose Connector.
(See Figure A.) Note: This is a left hand thread.
2.
3.
4.
5.
Make sure the Hand Wheel (6) is turned completely clockwise to the “OFF”
position. (See Figure A.)
Screw the Cylinder Connector (24) firmly into the female hose connector of the
L.P. tank. NOTE: The fitting is a reverse thread - 20 Lb. LPT.
The Hand Wheel (6) regulates the propane gas flow. Release the propane gas
flow by slightly turning the Hand Wheel counterclockwise. (See Figure A.)
Make sure the Burner (1) is pointing in a safe direction. Insert the lit end of a
commercial, long handled, fireplace/barbecue grill lighter through one of the slots
located on the Burner. (See Figure A.)
HANDLE CONNECTOR (23)
HOSE CONNECTOR (12)
HANDLE (11)
HAND WHEEL
(6)
17MM OPEN END WRENCH
HOSE
(21)
LEVER
(19)
19MM OPEN END WRENCH
BURNER (1)
CYLINDER CONNECTOR
(24)
FIGURE A
SKU 91033
PAGE 6
Download from Www.Somanuals.com. All Manuals Search And Download.
6.
7.
Adjust the flame to the desired level by turning the Hand Wheel (6)
counterclockwise. (See Figure A.)
NOTE: The lit Propane Torch should operate with a blue flame with a small
yellow tip. If necessary, adjust the Hand Wheel (6) if there is sputtering or
popping. (See Figure A.)
8.
Pressing the Lever (19) down toward the Handle (11) will intensify the size of the
flame. Releasing the Lever will bring the flame back to its previous size.
(See Figure A.) Caution: Be extra careful when using the Propane Torch with
the intense flame.
9.
To extinguish the flame, close the Hand Wheel (6) by turning it completely clock-
wise. (See Figure A.)
10.
11.
Allow sufficient time for the Propane Torch to completely cool. Then, store the
Propane Torch in a safe location and out of reach of children.
Disconnect the torch from the LP cylinder when not in use. Protect the hose from
cuts and abrasions.
INSPECTION, MAINTENANCE, AND CLEANING
1.
Before each use, inspect the general condition of the Propane Torch. Check the
Propane Torch for loose connections and joints, cracked, bent, or broken parts,
damaged hose, damaged propane tank, and any other condition that may affect
the safe operation of the Propane Torch. If a problem occurs, have the problem
corrected before further use. Do not use damaged equipment.
2.
3.
When cleaning, use only water and a mild detergent. Do not use cleaners that
are combustible or corrosive.
When storing, always allow sufficient time for the Propane Torch to completely
cool down before storing. Do not store flammable liquids or materials in the area
surrounding the Propane Torch. Make sure the Propane Torch’s Hand Wheel (6)
is in its “OFF” position. Only store the Propane Torch in a location that is out of
reach of children.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTUER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRSTOTHE ORIGINAL PROD-
UCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF
REPLACEMENT PARTS THERETO.
SKU 91033
PAGE 7
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
Part #
Description
Burner (Turbo 060)
Nozzle Hole
Nozzle Connector
Steel Tube Extension
O-Ring
Hand Wheel
Nut (M4)
Needle Guide Nut
Tap Casing
Iron Tube
Handle
Hose Connector
Part #
13
Description
Packing
O-Ring
1
2
3
4
5
6
7
8
9
14
15
16
17
18
19
20
21
22
23
24
Nut (M4)
Piston Lever
Jamming Piston Nut
Jamming Lever Pin
Lever
Steel Spring
Hose
10
11
12
Clip
Handle Connector
Cylinder Connector
ASSEMBLY DIAGRAM
7
6
5
8
11
16
10
9
12
13
2
17
18
15
14
20
4
19
3
23
22
1
21
22
24
NOTE: Some parts are listed and shown for illustration purposes only, and are not
available individually as replacement parts.
SKU 91033
PAGE 8
Download from Www.Somanuals.com. All Manuals Search And Download.
|