Freedom9 Network Card X10P User Manual

freeView X10P  
1-Port Cat5 Extender  
USER’S MANUAL  
P/N: KEX-150P  
Rev. 1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
freeView Pro X10P User Manual  
1 General Information  
1.1 Overview  
The freeView X10P is designed to allow users to access a computer from up to 500 feet (236  
meters) away. By allowing keyboard, mouse, and video signals to travel over standard  
Category 5 Ethernet cable, the transmitter and receiver pair facilitates secure remote access  
without installing additional cables.  
The freeView X10P is ideal for accessing servers located in server rooms that are difficult to  
work in or inaccessible due to environmental conditions, security concerns, or space limitations.  
Alternatively, multiple freeView X10P units can also be used to control computers in different  
locations (e.g. board room, demonstration room, server room) from a single location.  
Additionally, the freeView X10P can be connected to an existing analog KVM (keyboard-video-  
mouse) installation to provide remote access to all of the servers connected to the KVM.  
With both a local and a remote port on the unit, the freeView X10P allows a user to control both  
a local computer at their desk, along with a remote computer, with a simple hotkey command to  
switch between the two. The freeView X10P works with Category 5 Shielded Twisted Pair  
(STP), Unshielded Twisted Pair (UTP), Category 5e, 6, and 7 cables.  
1.2 Safety Instructions  
If one of the following situations arises, the equipment should be checked by service personnel.  
The power adapter is damaged.  
Liquid has leaked into the equipment.  
The equipment has been exposed to excessive moisture.  
The equipment does not work properly and you can not get it to work after reading this  
manual.  
The equipment has been dropped and damaged.  
The equipment shows obvious signs of damage.  
1.3 Package Contents  
The complete freeView X10P package consists of:  
freeView X10P Transmitter  
freeView X10P Receiver  
3-in-1 PS/2 KVM cable  
Power Adapter  
User Manual  
Ensure that the unit was not damaged during shipping. If you encounter a problem, please  
contact your dealer.  
Read this manual thoroughly, and follow the installation and operation procedures carefully to  
prevent any damage to the product and/or any of the devices connected to it.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
1.4 Product Specifications  
freeView X10P Receiver  
freeView X10P Transmitter  
2 x Mini-din 6 pin (PS/2) Female  
2 x Mini-din 6 pin (PS/2) Female  
2 x HDDB 15-pin  
1 x RJ-45  
Keyboard Port  
Mouse Port  
VGA Port  
2 x Mini-din 6 pin (PS/2) Female  
2 x Mini-din 6 pin (PS/2) Female  
2 x HDDB 15-pin  
1 x RJ-45  
Network Port  
LED  
PC1, PC2  
Power, Data  
Power Adapter  
Weight  
DC 9V, 500 mA  
5.3 oz (150g)  
N/A  
4.7 oz (134g)  
Size (L x W x H)  
4.6 x 3.1 x 1.6 in  
(117 x 80 x 39.5 mm)  
CE, FCC  
4.4 x 3.0 x 1.4 in  
(111.5 x 75 x 35.5 mm)  
CE, FCC  
Certification  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
freeView Pro X10P User Manual  
2 Installation  
2.1 Configuring the Transmitter  
Determine how far away the Transmitter will be located from the Receiver. If the distance is less  
than 300 ft (91 m), set both DIP switches on the Transmitter to the OFF position. If the distance  
is 300 ft (91 m) or more, set both DIP switches on the Transmitter to the ON position.  
2.2 Connecting the Devices  
1. Turn off all computers and peripherals before connecting them to the freeView Pro X10P.  
2. Connect one end of the KVM cable included in the box to the VGA and PS/2 ports on the  
computer.  
3. Connect the other end of the KVM cable to the PS/2 and VGA ports labeled PC Port on the  
Transmitter.  
4. A local console can be installed by connecting a PS/2 keyboard, mouse, and monitor to the  
Console ports on the Transmitter (see Figure 2-2).  
5. Connect the Transmitter to the Receiver by using a straight-through category 5, 5e, 6, or 7  
cable.  
6. Connect a PS/2 keyboard, mouse, and monitor to the Console ports on the Receiver to be  
able to control the remote computer.  
7. If you are connecting the Receiver to a local computer, connect one end of a KVM cable (not  
included) to the PS/2 and VGA ports labeled PC Port on the Receiver, and the other end of  
the KVM cable to the PS/2 and VGA ports on the local computer (see Figure 2-2).  
8. Connect the power adapter to the Receiver and plug the adapter into an outlet.  
9. Power on the computer and peripherals.  
10. Adjust the video quality using the Video Tuning Dial on the Receiver to sharpen the picture.  
Note: The RJ-45 ports on the freeView X10P are not standard Ethernet ports. Do not connect  
the freeView X10P to a network device such as a switch or a hub, otherwise the device will not  
work.  
Figure 2-1: Basic Setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Figure 2-2: Advanced Setup with Remote Console and Local Computer  
2.3 Connecting to an Analog KVM  
The freeView X10P can also be connected to an analog KVM (or stack of analog KVMs) to  
control multiple computers remotely (Figure 2-3). To connect the Transmitter to a KVM, follow  
the steps outlined in section 2.2, but instead of connecting the KVM cable to the PS/2 and VGA  
ports of the computer in step 2, connect the KVM cable to the PS/2 and VGA ports labeled  
Console on the KVM switch (label may differ depending on the KVM).  
Figure 2-3: Connecting to a KVM  
2.4 Switching Between Computers  
If you are using both a local computer and the remote computer, you can use a hotkey to toggle  
between the local computer and the remote computer. To initiate a hotkey sequence, press the  
Scroll Lock key twice within 2 seconds. A beep will sound indicating that the hotkey sequence  
has been entered. The commands are listed below:  
Scroll  
Lock  
Scroll  
Lock  
C
Q
+
+
+
+
= Toggle Between Local and Remote  
computers  
Scroll  
Lock  
Scroll  
Lock  
= Turn Confirmation Beep On/Off  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
freeView Pro X10P User Manual  
3 Troubleshooting  
3.1 Troubleshooting  
Problem: The Power LED on the Receiver does not turn on.  
Resolution:  
Check that the power adapter is connected securely to the unit.  
Check that the power outlet is supplying power.  
Problem: The monitor does not display any video.  
Resolution:  
Check that the monitor is securely connected to the Receiver.  
Check that the KVM cable is securely connected to the Transmitter and the Computer.  
Ensure that the Cat5 cable is attached securely to the Receiver and Transmitter.  
Ensure that the KVM cable is attached when the computer is booting up.  
Ensure that the power adapter is connected to the Receiver.  
Ensure that the monitor is receiving power and is on.  
Problem: The video displayed is blurry.  
Resolution:  
Check that the monitor is securely connected to the Receiver.  
Check that the KVM cable is securely connected to the Transmitter and the Computer.  
Use the Video Tuning Dial to adjust the video quality.  
Lower the resolution on the remote computer. Maximum recommended resolution is 1280 x  
1024, though overall quality depends on the quality of the Cat5 cable.  
Problem: The computer displays a “Keyboard or Mouse Not Found” error message.  
Resolution:  
Check that the KVM cable is securely connected to the Transmitter and the Computer.  
Check that the keyboard is connected securely to the Receiver.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4 Certifications  
FCC  
This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation  
is subject to the following two conditions:  
(1) This device may not cause harmful interference  
(2) This device must accept any interference received. Including interference that may cause  
undesired operation.  
CE – Certificate  
This equipment is in compliance with the requirements of the following regulations: EN 55 022:  
CLASS B  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

Eclipse Fujitsu Ten Car Stereo System CD3414 User Manual
Edelbrock Automobile Parts 1580 User Manual
Essick Air Humidifier ED11 800 User Manual
Everpure Water System EV9259 14 User Manual
Extron electronic Switch SWP123 User Manual
Freud Tools Router DPSDD User Manual
Furuno Printer FCV 665 User Manual
Gardena Trimmer THS400 User Manual
Garmin Home Security System FA168CPS User Manual
Global Upholstery Co Indoor Furnishings 2604C User Manual