Table of Contents
…………………………………………………………… 1
…………………………………………………………… 1
…………………………………………………………… 1
…………………………………………………………… 1
…………………………………………………………… 1
…………………………………………………………… 2
…………………………………………………………… 2
…………………………………………………………… 2
…………………………………………………………… 3
…………………………………………………………… 4
…………………………………………………………… 6
…………………………………………………………… 6
…………………………………………………………… 7
…………………………………………………………… 7
…………………………………………………………… 7
…………………………………………………………… 8
…………………………………………………………… 9
Safety Rules
Electrical Safety
Installation Safety
Cleaning Safety
SPECIAL NOTES ON LCD MONITORS
Components and Accessories
Usage
Installation Guide
Adjustment of Display
Operation
Adjustment of Screen
Attachment
Plug and Play
Power Saver
Troubleshooting
Technical Specifications
Display Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
Components and Accessories
LCD Display
D-Sub Signal Cable
Quick Start Guide
User’s Manual (CD-ROM)
Power Cable
DVI Signal Cable
(Optional)
Usage
Installation
Guide
Note: Read the [Safety Rules] section carefully before starting the installation
Attention
Before installing your LCD display, consider the following with reference to the space where the
display is to be installed:
ꢀ
To minimize the reflection of the display, protect your eyes and ensure premium quality,
don’t install your LCD display near windows or with backlight. Keep the display away from
your eyes at least by 30 cm.
ꢀ
ꢀ
The upper edge of the display should be a little higher than your sight.
Adjust the front and back dip angles of the display based on your visual angle so that you
can view the display comfortably.
Quick
Complete the following steps for quick installation: (See the figure)
Installation
Assemble the seat of the display
ꢁ
ꢁ
Take the seat out of the box and place it on a flat table.
Take your LCD display out of the carton and assemble
the display and seat along the rail. You will hear a click
sound when the display and seat are engaged
correctly.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
.
Connection to PC
ꢁ
Make sure that the power supply of your PC is turned off
and the power plug is removed.
ꢁ
Connect and fasten both ends of the signal cable to your
PC host and LCD display respectively.
ꢁ
ꢁ
ꢁ
Connect the attached power cable to your LCD display.
Plug the power cable to the receptacle.
Turn on the power supplies of your PC and LCD display.
X Transformer DC end
Y DVI Signal Cable (Optional)
Z D-Sub Signal Cable
Adjustment of Display
Key Definition
1
Power Source
Power On/Off
Green indication: Power is on and normal
Orange indication: Sleep status in the energy-saving
mode
Colorless indication: Power off
2
3
4
5
Menu
>
<
Auto
OSD Menu
Plus
Minus
Automatic
Adjustment
Press this button to enter OSD. Press it again to exit OSD.
Press this button for selection or adjustment when OSD is
started.
Press this button to exit the manual when OSD is started.
Press this button for the display to optimize the position,
phase and clock pulse automatically when OSD is not
started.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation for Analog
Your LCD display has been adjusted to its optimal status before shipment. (See Page 9).
Your can also adjust the image in accordance with the following illustrations and steps.
Steps:
1. Click MENU to display the OSD window as shown in the following figure.
2. Click < or > to select the function to be adjusted as shown in the following figure.
3. Click the MENU to select the function to be adjusted.
4. Click < or > to change current settings.
5. To exit OSD, select “ ” to close the OSD window and save changes. To change other
settings, repeat steps 2-4.
Bright/Contract Adjustment
Phase/Clock pulse Adjustment
Horizontal/Vertical Adjustment
Color Temp. Adjustment
Language Selection
OSD Setting
Auto Adjustment
Message
Restore
Exit
(Analog)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation for Digital
Your LCD display has been adjusted to its optimal status before shipment. (See Page 9).
Your can also adjust the image in accordance with the following illustrations and steps.
Steps:
1. Click MENU to display the OSD window as shown in the following figure.
2. Click < or > to select the function to be adjusted as shown in the following figure.
3. Click the MENU to select the function to be adjusted.
4. Click < or > to change current settings.
5. To exit OSD, select “ ” to close the OSD window and save changes. To change other
settings, repeat steps 2-4.
Bright/Contract Adjustment
Phase/Clock pulse Adjustment
Horizontal/Vertical Adjustment
Color Temp. Adjustment
Language Selection
OSD Setting
Input Selection
Message
Restore
Exit
(Digital)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjustment of Screen
Function
Definition
Primary Secondary Secondary Description
Directory Directory
Directory
Items
Symbol
Symbol
Contrast
Adjust the contrast between the foreground and
background of an image on the screen
Brightness
Phase
Adjust the background brightness of the screen
Adjust the focus of the image (for analog input
adjustment only)
Clock Pulse
Horizontal
Adjust the clock pulse of the image (for analog input
adjustment only)
Move the image left and right on the screen (for analog
input adjustment only)
Vertical
Move the image up and down on the screen (for analog
input adjustment only)
N/A
N/A
Warm Color
Temp.
Cold Color
Temp.
Set up the color temp. to be warm white color
Set up the color temp. to be cold white color
User
Definition/Red
User
Definition/Green
User
Adjust red/green/blue gain
Definition/Blue
English
N/A
N/A
N/A
N/A
N/A
Select the language you want
繁體中文
Deutsch
Français
Español
N/A
N/A
Italiano
简体中文
N/A
日本語
Horizontal
Move OSD left and right
Vertical
Move OSD up and down
OSD Time
Display
Auto
Adjust OSD time display settings
N/A
N/A
N/A
Set up horizontal, vertical, sequence and focus
automatically (for analog input only)
Adjustment
Analog
Digital
Select the input source you want (for DVI Input only)
Message
Display resolution, H/V frequency and the input port
used for current input timing function
N/A
N/A
Restore
Exit
Restore to factory settings
Close the OSD window and save changes
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Attachment
ꢀ
ꢀ
The product provides the latest VESA plug and play function to prevent complicated
and time-consuming installation procedures. The plug and play function allows your
computer system to identify the LCD display easily and set up the functions of the
LCD display automatically.
Plug and Play
The LCD display transfers the Extended Display Identification Data (EDID) to your
computer system via the Display Data Channel (DDC), so that your computer can
use the self-setting function of the LCD display.
ꢀ
ꢀ
The LCD display has a built-in Power Control System (Power Saver).
Power Saver
When the LCD display is not operated during a certain time, the Power Control
System will brings the LCD display into low voltage status automatically to save
power. Move the mouse slightly or press any key to return to the normal operation.
ꢀ
ꢀ
ꢀ
The Power Saver function can only be operated by the display card of the computer
system. You can set up this function from your computer.
The LCD display is compatible with EPAENERGY STAR NÜTEK when used with
VESA DPMS.
To save power and extend the life of the product, turn off the LCD display power
supply when it is not used or when remaining idle for a long time.
Troubleshooting
ꢀ
ꢀ
Check that the power switch is turned on.
Power LED does
not light
Make sure that the power cable is connected.
Icon off
ꢀ
ꢀ
ꢀ
ꢀ
Check that the power switch is turned on.
Make that the power cable is connected.
Ensure that the signal cable is inserted in the receptacle appropriately.
The Power Saver may turn off the display automatically during the operation. Make
sure that the display is restored when you press any key from the keyboard.
Color Default
ꢀ
Refer to “Color Temperature Adjustment” to adjust RGB color or select color
temperatures.
Instability or Ripple
ꢀ
ꢀ
Remove the electronic equipment in the vicinity that may cause EMI interference.
Check the signal cable of the display and ensure that no pin is bent.
Image Offset or
wrong Size
ꢀ
ꢀ
Press the auto adjustment button to optimize the screen automatically.
Set up the reference position.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
Panel Dimension
Diagonal 484mm (19 inch) LCD display
1,440 x 900/ WXGA+
Max. Resolution
Max. Pixel
Up to 16.2M true color
Horizontal 0.285mm x Vertical 0.285mm
300 cd/m2
Pixel Span
LCD Panel
Brightness
(Back Light
Source)
Contrast
500 : 1
LC Response Time
Visual Angle
Effective Display
8 ms
Horizontal 150° / Vertical 130°
Horizontal 410.4mm x Vertical 256.5mm
Simulated video frequency: 0.7 Vpp, 75Ω
(separate SYNC and composite SYNC)
Signal Mode
Input Signal
SYNC Frequency
Horizontal 30kHz~82kHz x Vertical 56Hz ~76 Hz
135MHz
Max. Pixel Clock
Image
D-Sub 15 PIN (VESA) / DVI-D (Optional)
Phone Jack, d=3.5mm (Optional)
AC100~240Volts, 50/60Hz
60W
Input Terminal
Audio
Power Transformer
Operation Mode
Power
Consumption
Power Saving Sleep Mode
Power Saving OFF Mode
2W @230VAC 50Hz
1W @230VAC 50Hz
5℃ ~ 35℃ (operation)/ -20℃ ~ 55℃ (storage)
Temperature
Humidity
Environmental
Conditions
20% ~ 80% (operation)/ 20% ~ 85% (storage)
Actual Dimension (W x D x H)
Net Weight
448.5 mm x 182mm x 369.5mm
4.4 kg
TCO99;UL/CUL;TÜV-GS;CE/LVD;TÜV-ERGO;CB;CCC;FCC-B;
VCCI-B;CE/EMC;C-Tick; BSMI; ISO 13406-2;EPA; PCT; NOM
Safety Standard
Lamp Disposal
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF
ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class B digital apparatus meets all requirements of the Canadian Interference- Causing Equipment
Regulations.
Cet appareil numérique de la class B respecte toures les exigencies du Réglement sur le materiel brouilieur
du Canada.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
If the signal of your PC system is the same as one of the following reference signal
modes, the screen will be adjusted automatically. If not, the screen will not display or
only the LED lights will display. For more information about the adjustment mode,
refer to the instructions of your display card.
Display Mode
Hor.
Frequency
(kHz)
Vert.
Frequency
(Hz)
Pixel
Frequency
(MHz)
SYNC Polarity
(H/V)
Display Mode
VGA 640x480
31.469
37.861
37.500
35.156
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
47.776
55.935
31.469
35.000
49.725
60.150
59.940
72.809
75.000
56.250
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
59.870
55.887
70.087
66.667
74.500
74.720
25.175
31.500
31.500
36.000
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
79.500
106.5
-/-
-/-
VESA
-/-
+/+
+/+
+/+
+/+
-/-
SVGA 800x600
XGA 1024x768
-/-
+/+
+/+
+/+
+/+
-/+
-/+
-/+
-/-
SXGA 1152x864
SXGA 1280x1024
WXGA 1280x768
WXGA 1440x900
720 x 400
28.322
30.240
57.283
80.000
VGA TEXT
Macintosh
640x480
-/-
832 x 624
-/-
1024 x 768
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|