DESIGNER SOLUTIONS
MANUAL PART NUMBER: 400-0520-001
SP107-101/101C
FURNITURE MOUNT
INTERCONNECT BOX
USER’S GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
DESIGNER SOLUTIONS
1.3 CLEANING
PRECAUTIONS / SAFETY WARNINGS
1
·
Surfaces should be cleaned with a dry cloth.
Never use strong detergents or solvents such as
alcohol or thinner. Do not use a wet cloth or
water to clean the unit.
Please read this manual carefully before using your
SP107-101 AV Interconnect. Keep this manual
handy for future reference. These safety
instructions are to ensure the long life of your
SP107-101 and to prevent fire and shock hazards.
Please read them carefully and heed all warnings.
1.4 FCC NOTICE
·
·
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
1.1 GENERAL
·
Unauthorized personnel shall not open the unit.
There are high-voltage components inside.
·
Qualified ALTINEX service personnel or their
authorized representatives must perform all
service.
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
1.2 INSTALLATION PRECAUTIONS
·
For best results, place the SP107-101 in a dry
area away from dust.
·
To prevent fire or shock, do not expose this unit
to water or moisture. Do not place the
SP107-101 in direct sunlight, near heaters or
heat-radiating appliances, or near any liquid.
Exposure to direct sunlight, smoke, or steam can
harm internal components.
equipment is operated in
a
commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions found herein, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the interference
at his expense.
·
·
Handle the SP107-101 carefully. Dropping or
jarring can damage the bezel.
Never place fingers inside the opening on either
side of the unit. This action could cause injury
due to sharp edges inside.
·
Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could void
the user’s authority to operate the equipment.
·
Disconnect the SP107-101’s power cord to turn
off the main power. This supplies power to the
AC sockets on the panel. The power outlet
should be installed near the equipment and
should be easily accessible.
·
·
We recommend using wall outlets with a Ground
Fault Circuit Interrupter (GFCI) for maximum
protection.
Install all cables according to the instructions
found herein. Do not force or pull any cable or
power cord that is attached to the SP107-101.
400-0520-001
2
Download from Www.Somanuals.com. All Manuals Search And Download.
DESIGNER SOLUTIONS
ABOUT YOUR SP107-101
2
TECHNICAL SPECIFICATIONS
3
Specifications are subject to change.
SP107-101
Surface Mount AV Interconnect Plate
FEATURES/
SP107-101
The SP107-101 is designed for use in a table,
podium, or other piece of furniture and is part of the
many interconnection solutions offered by
ALTINEX. It provides a means of connecting a
laptop or other audiovisual equipment on the
surface to a presentation system below the
furniture or in another room. The SP107-101 offers
interconnections for the most frequently used
presentation inputs.
DESCRIPTION
PASS-THROUGH
AC Power
10 ft (3 m)
110 VAC, 60 Hz, 5 A
NEMA F-M
Audio, Video, USB, and Network
·
·
·
AC power
8 in (203 mm)
3.5mm F-F (1)
Computer audio and video
Network and USB
Computer Audio
Digital Video
S-Video
Female receptacles for power and computer
signals are provided in the panel. The AC power
cable is permanently attached to the SP107-101
and has a cord length of 10 ft (3 m). Short adapter
cables are preinstalled at the factory for computer
audio, HDMI, S-Video, USB, and network
connections for ease of installation. Bulkhead
connectors are provided for computer video,
composite video, and left and right audio. Six foot
extension cables are provided for all signal
connections.
HDMI F-F (1)
4-pin Mini DIN F-F (1)
Type-A F-F (1)
USB
Network
RJ-45 F-F (1)
Bulkhead Connector
Computer Video
15-pin HD F-F (1)
RCA F-F (1)
Composite Video
Left & Right Audio
Accessories Included
The SP107-101C is customizable and allows
different connector types to be selected at the time
of purchase. The AC receptacle and circuit breaker
are fixed, but the other connectors can be replaced
with other video, audio, and communication type
connectors. For example, the 15-pin HD computer
video input connector can be replaced with a 9-pin
D-sub connector for serial communication. There
are several options available for use in the network
location. See the ALTINEX website for a complete
list of available connector types including: RCA
jacks, LED indicators, 4-pin Mini-DINs, etc.
RCA F-F (2)
§ VGA, M-M
§ S-Video, M-M
§ RCA x3 (V, L, R), M-M
§ CAT-5, M-M
Extension cables
6 ft (2 m)
§ HDMI, M-M
§ USB Type-A, M-M
§ Audio 3.5mm, M-M
§ Mountings brackets
§ Mounting screws
Miscellaneous
Hardware
Table 1. SP107-101 Description
400-0520-001
3
Download from Www.Somanuals.com. All Manuals Search And Download.
DESIGNER SOLUTIONS
MECHANICAL
Max. Table Thickness
Width
SP107-101
ELECTRICAL
SP107-101
3.0 in (76 mm)
6.4 in (163 mm)
4.4 in (112 mm)
Power Rating
120VAC, 60Hz, 15A
(pass-through AC power)
Table 3. SP107-101 Electrical
Depth
Height
(from surface down,
not including cables)
3.0 in (76 mm)
Net Weight SP107-101
Net Weight Extension Cables
Shipping Weight (approx.)
Material
2.4 lb (1.1 kg)
2.2 lb (1.0 kg)
6.1 lb (2.8 kg)
0.062 in Aluminum
Black paint,
Fine texture
Finish
T° Operating (T° Max)
10°C-35°C (40°C)
Humidity
90% non-condensing
Table 2. SP107-101 Mechanical
400-0520-001
4
Download from Www.Somanuals.com. All Manuals Search And Download.
DESIGNER SOLUTIONS
PRODUCT DESCRIPTION
4
400-0520-001
5
Download from Www.Somanuals.com. All Manuals Search And Download.
DESIGNER SOLUTIONS
APPLICATION DIAGRAMS
5
DIAGRAM 1: CUTOUT DIMENSIONS
400-0520-001
6
Download from Www.Somanuals.com. All Manuals Search And Download.
DESIGNER SOLUTIONS
DIAGRAM 2: DIMENSIONS
400-0520-001
7
Download from Www.Somanuals.com. All Manuals Search And Download.
DESIGNER SOLUTIONS
DIAGRAM 3: SP107-101 INSTALLATION
400-0520-001
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DESIGNER SOLUTIONS
INSTALLING YOUR SP107-101/101C
6
TROUBLESHOOTING GUIDE
8
Step 1. Cut an opening into the furniture’s
The SP107-101/101C supplied was carefully tested
and no problems were detected. However, we
would like to offer the following suggestions:
surface.
Note: The furniture can be 3” or less in
thickness. Always confirm dimensions
before cutting to insure that specifications
have not changed.
·
Please make sure that the highest quality
network cables are used.
·
Make sure that no cable or power cord is
damaged or pinched. If there has been damage,
do not use the SP107-101/101C. Please call the
ALTINEX Customer Service Department at
(714) 990-2300 to have the unit repaired.
Step 2. Insert the SP107-101/101C into the table
cutout.
Step 3. Refer to Diagram 3 and from underneath
the furniture surface, attach the mounting
brackets to the 6-32 studs on the bottom
side of the SP107-101/101C using the
screws provided.
ALTINEX POLICIES
9
9.1 LIMITED WARRANTY/RETURN POLICIES
NOTE: If the surface is too thick for the
screws provided, longer 6-32
screws can be used.
Please see the ALTINEX website at
www.altinex.com for details on warranty and
return policies.
Step 4. Secure the audio/video cables by using
cable clamps, tie wraps, or other standard
mounting hardware. Pass the power cord
from the bottom of the housing and attach
it to the furniture separately from the
audio/video cables.
9.2 CONTACT INFORMATION
ALTINEX, Inc.
592 Apollo Street
Brea, CA 92821 USA
TEL: 714 990-2300
Step 5. Connect the appropriate cables with the
correct input connectors on the bottom of
the unit.
TOLL FREE: 1-800-ALTINEX
WEB: www.altinex.com
E-MAIL: [email protected]
Step 6. The SP107-101/101C is now operational.
OPERATION
7
The SP107-101/101C requires no adjustments for
performance. Once set-up, the SP107-101/101C
will work trouble-free without user intervention.
Connect external devices to the appropriate
connector on the SP107-101/101C.
400-0520-001
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|