Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
CD-MPX850 Mini Component System consisting of CD-MPX850 (main
unit), CP-MPX850 (speaker system).
MINI COMPONENT SYSTEM
MODEL
CD-MPX850
OPERATION MANUAL
Accessories
Please confirm that the following accessories are included.
Remote control
1
AM loop antenna
1
FM antenna
(92LFANT1535A)
1
(RRMCGA122AWSA) (QANTL0010AWZZ)
Note:
Only the above accessories are included.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
CD-MPX850
10) Protect the power cord from being walked on or pinched particularly at
Electricity is used to perform many useful functions, but it can also
cause personal injuries and property damage if improperly handled.
This product has been engineered and manufactured with the
highest priority on safety. However, improper use can result in
electric shock and/or fire. In order to prevent potential danger, please
observe the following instructions when installing, operating and
cleaning the product. To ensure your safety and prolong the service
life of this product, please read the following precautions carefully
before use.
plugs, convenience receptacles, and the point where they exit from
the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
13) Unplug this apparatus during lightning storms or when unused for
long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
Additional Safety Information
15) Power Sources - This product should be operated only from the
type of power source indicated on the marking label. If you are
not sure of the type of power supply to your home, consult your
product dealer or local power company. For product intended
to operate from battery power, or other sources, refer to the
operating instructions.
7) Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
16) Overloading - Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in a risk of
fire or electric shock.
17) Object and Liquid Entry - Never push objects of any kind into
this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPX850
IMPORTANT SAFETY INSTRUCTIONS (continued)
18) Damage Requiring Service - Unplug this product from the wall
outlet and refer servicing to qualified service personnel under
the following conditions :
23) Outdoor Antenna Grounding - If an outside antenna or cable system
is connected to the product, be sure the antenna or cable system is
grounded so as to provide some protection against voltage surges
and built-up static charges. Article810 of the National Electrical Code,
ANSI/NFPA 70, provides information with regards to proper grounding
of the mast and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the
product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its normal
operation,
Example of antenna grounding as per
National Electrical Code, ANSI/NFPA 70
ANTENNA LEAD IN WIRE
GROUND
CLAMP
e) If the product has been dropped or damaged in
any way, and
f) When the product exhibits a distinct change in
performance - this indicates a need for service.
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
19) Replacement Parts - When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics
as the original part. Unauthorized substitutions may result in
fire, electric shock, or other hazards.
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
S2898A
24) Protective Attachment Plug - The product is equipped with an attachment
plug having overload protection. This is a safety feature. See Instruction
Manual for replacement or resetting of protective device. If replacement
of the plug is required, be sure the service technician has used a replace-
ment plug specified by the manufacturer that has the same overload
protection as the original plug.
20) Safety Check - Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
21) Wall or ceiling mounting - When mounting the product on a wall
or ceiling, be sure to install the product according to the method
recommended by the manufacturer.
25) Stand - Do not place the product on an unstable cart, stand, tripod or
table. Placing the product on an unstable base can cause the product to
fall, resulting in serious personal injuries as well as damage to the product.
Use only a cart, stand, tripod, bracket or table recommended by the
manufacturer or sold with the product. When mounting the product on a
wall, be sure to follow the manufacturer's intructions. Use only the m
hardware recommended by the manufacturer.
22) Power Lines - An outside antenna system should not be located
in the vicinity of overhead power lines or other electric light or
power circuits,or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should
be taken to keep from touching such power lines or circuits as
contact with them might be fatal.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
CD-MPX850
Page
ꢀ General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 - 9
ENERGY STAR® Program Information
ꢀ Preparation for Use
Products that have earned
the ENERGY STAR® are
designed to protect the
environment through
System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 12
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
ꢀ Basic Operation
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Setting the clock (Remote control only). . . . . . . . . . . . . . . . . . 15
superior energy efficiency.
ꢀ CD or MP3/WMA disc Playback
Listening to a CD or MP3/WMA disc . . . . . . . . . . . . . . . . .16 - 19
Advanced CD or MP3/WMA disc playback . . . . . . . . . . . .20 - 22
MP3/WMA navigation (only for MP3/WMA files) . . . . . . . .23 - 26
To comply with the ENERGY STAR® standards mentioned above,
please cancel the demonstration mode, as described on page 12.
ꢀ Radio
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 - 28
ENERGY STAR® is a U.S. registered mark.
ꢀ Tape Playback
Listening to a cassette tape (TAPE 1 or TAPE 2) . . . . . . .29 - 30
Special Note
ꢀ Tape Recording
Supply of this product does not convey a license nor imply any right
to distribute content created with this product in revenue-generating
broadcast systems (terrestrial, satellite, cable and/or other distribu-
tion channels), revenue-generating streaming applications (via Inter-
net, intranets and/or other networks), other revenue-generating
content distribution systems (pay-audio or audio-on-demand appli-
cations and the like) or on revenue-generating physical media (com-
pact discs, digital versatile discs, semiconductor chips, hard drives,
memory cards and the like). An independent license for such use is
Recording on a cassette tape . . . . . . . . . . . . . . . . . . . . . . .30 - 32
ꢀ Advanced Features
Timer and sleep operation (Remote control only). . . . . . .33 - 36
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . . . .37 - 38
ꢀ References
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 - 40
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 - 42
MPEG Layer-3 audio coding technology licensed from Fraunhofer
IIS and Thomson.
CONSUMER LIMITED WARRANTY . . . . . . . . . . . . . .Back cover
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
CD-MPX850
ꢀ General
ꢁHold the AC power plug by the head when
removing it from the AC outlet, as pulling
the cord can damage internal wires.
ꢁThe AC power plug is used as disconnect
device and shall always remain readily
operable.
ꢁPlease ensure that the equipment is positioned in a well ventilated
area and ensure that there is at least 4" (10 cm) of free space
along the sides, top and back of the equipment.
4" (10 cm) 4" (10 cm)
4" (10 cm)
ꢁDo not remove the outer cover, as this
may result in electric shock. Refer
internal service to your local SHARP
service facility.
4" (10 cm)
Table
A
C
I
N
T
ꢁUse the unit on a firm, level surface free from
vibration.
ꢁ
This unit should only be used within the range of 41
(5 C - 35 C).
˚F - 95˚F
˚
˚
Warning:
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of
accident causing damage. SHARP will not be held responsible for
any damage resulting from use of this unit with a voltage other than
that which is specified.
ꢁKeep the unit away from direct sunlight,
strong magnetic fields, excessive dust,
humidity and electronic/electrical equip-
ment (home computers, facsimiles, etc.)
which generate electrical noise.
ꢁDo not place anything on top of the unit.
ꢀ Volume control
ꢁDo not expose the unit to moisture, to temperatures higher than
140˚F (60˚C) or to extremely low temperatures.
ꢁIf your system does not work properly, disconnect the AC power
cord from the AC outlet. Plug the AC power cord back in, and then
turn on your system.
The sound level at a given volume setting depends on speaker
efficiency, location, and various other factors. It is advisable to avoid
exposure to high volume levels, which occurs while turning the unit
on with the volume control setting up high, or while continually
listening at high volumes.
ꢁIn case of an electrical storm, unplug the
unit for safety.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and indicators
CD-MPX850
ꢀ Front panel
Reference page
1. Disc Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2. Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
3. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5. Power On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . 14
6. Tape (1 2) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
7. Game/Video Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
8. Tape 1 Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . 29
9. Headphone Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
10. Game/Video Input Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
11. Disc Tray Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . 17
12. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 17
13. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
14. CD or Tape Stop Button . . . . . . . . . . . . . . . . . . . . . . . . 18, 30
15. CD Play or Repeat,Tape Play Button . . . . . . . . . . . 17, 21, 29
16. CD Track Up or Fast Forward, Tape 2 Fast Forward,
Tuner Preset Up, Time Up Button . . . . . . . . . . 15, 18, 28, 30
17. CD Track Down or Fast Reverse,Tape 2 Rewind,
Tuner Preset Down,Time Down Button . . . . . . 15, 18, 28, 30
18. Tape 2 Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . 29
19. Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPX850
Controls and indicators (continued)
ꢀ Display
Reference page
1
2
3
4
5
6
7
8
9
1. Disc Number Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2. MP3/WMA Folder Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 23
3. MP3/WMA Title Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4. MP3 Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5. WMA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
7. Timer Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
8. Timer Recording Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 34
9. Tape 2 Record Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
10. MP3/WMA Total Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 24
11. Daily Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
12. FM Stereo Mode Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 27
13. FM Stereo Receiving Indicator . . . . . . . . . . . . . . . . . . . . . . 27
14. Tape Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
15. Memory Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 28
16. Extra Bass Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
17. Disc Repeat Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 21
18. Disc Pause Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
19. Disc Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
11 12 13
16 17
10
14
18
19
15
ꢀ Rear panel
Reference page
1. Cooling Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2. AC Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3. FM 75 Ohms Antenna Jack . . . . . . . . . . . . . . . . . . . . . . . . . 11
4. AM Antenna Ground Terminal . . . . . . . . . . . . . . . . . . . . . . 11
5. AM Loop Antenna Terminal . . . . . . . . . . . . . . . . . . . . . . . . . 11
6. Speaker Light-up Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7. Video out Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
8. Front Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3
4
5
6
7
ꢀ Speaker system
1. Tweeter
1
2. Super Tweeter
1
3. Woofer
8
2
4
5
4. Bass Reflex Duct
5. Speaker Wire
AC INPUT
6. Speaker Light-Up Wire
2
3
6
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPX850
ꢀ Remote control
1
2
Reference page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 13
2. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 17
3. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 33
4. Character Input/Disc Direct Search Buttons . . . . . . . . 20, 25
5. Equalizer Mode Select Button . . . . . . . . . . . . . . . . . . . . . . 14
6. Extra Bass/Demo Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7. Power On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . 14
8. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
9. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
10. Tape (1 2) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
11. Game/Video Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
12. Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . 14
13. Disc Clear/Dimmer Button . . . . . . . . . . . . . . . . . . . . . . 14, 22
14. Disc Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
15. Disc Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
16. Tape Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
17. Memory Button . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 22, 28, 33
18. Disc Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
19. Disc Play or Repeat Button . . . . . . . . . . . . . . . . . . . . . . 17, 21
20. Tape Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
21. Tape 2 Record Pause Button . . . . . . . . . . . . . . . . . . . . . . . 31
22. Tuning Up, Cursor Up Button . . . . . . . . . . . . . . . . . . . . . . . 23
23. Disc Track Up or Fast Forward,Tape Fast Forward,
17
13
14
15
7
8
9
18
19
20
21
10
11
16
22
23
3
4
24
25
26 27 28
29
5
6
12
Tuner Preset Up,Time Up, Cursor Right Button . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 18, 28, 30
24. Disc Track Down or Fast Reverse, Tape Rewind,
Tuner Preset Down, Time Down, Cursor Left Button . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 18, 28, 30
25. Tuning Down, Cursor Down Button . . . . . . . . . . . . . . . . . . 23
26. MP3/WMA Navigation Mode Select Button . . . . . . . . . . . . 23
27. Character Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
28. MP3/WMA Display Button . . . . . . . . . . . . . . . . . . . . . . . . . . 19
29. Enter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
9
Download from Www.Somanuals.com. All Manuals Search And Download.
System connections
CD-MPX850
Make sure to unplug the AC power cord before any connections.
Antenna connection (see page 11)
FM antenna
AM loop antenna
Left speaker
Right speaker
AC INPUT
Speaker light-up wire
Speaker light-up wire
AC outlet
(AC 120 V, 60 Hz)
Speaker connection
(see page 11)
AC power connection (see page 12)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPX850
ꢀ Antenna connection
Supplied FM antenna:
Connect the FM antenna wire to the
FM 75 OHMS jack and position the FM
antenna wire in the direction where the
strongest signal can be received.
ꢀ Speaker Light-Up connection
1. Connect the speaker light-up wires to the SPEAKERS LIGHT-UP
jacks for speaker illumination. To turn off the speaker light-up
feature, press the CLEAR/DIMMER button on the remote control
for 2 seconds or more.
AM loop
antenna
FM
antenna
RIGHT SPEAKER
LEFT SPEAKER
Supplied AM loop antenna:
Connect the AM loop antenna to the
AM and GND terminals. Position the
AM loop antenna for optimum
reception. Place the AM loop antenna
on a shelf, etc., or attach it to a stand
or a wall with screws (not supplied).
A
C
I
N
P
U
T
Note:
Note:
Placing the antenna on the unit or near the AC power cord may
cause noise pickup. Place the antenna away from the unit for better
reception.
Placing the right speaker light-up wire to the RIGHT jack and the left
speaker light-up wire to the LEFT jack.
Installing the AM loop antenna:
< Assembling >
< Attaching to the wall >
Caution:
ꢁUse speakers with an impedance of 6 ohms or more, as lower
impedance speakers can damage the unit.
ꢁDo not mistake the right and the left
channels. The right speaker is the one on the
right side when you face the unit.
Wall Screws (not supplied)
ꢁDo not let the bare speaker wires touch
each other.
ꢀ Speaker connection
ꢁDo not stand or sit on the speakers. You may
be injured.
ꢁDo not allow any objects to fall into or to be
placed in the bass reflex duct.
Connect the black wire to the FRONT SPEAKERS minus (-) terminal,
and the red wire to the FRONT SPEAKERS plus (+) terminal.
Incorrect
Red
A
C
I
N
P
U
T
Black
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPX850
System connections (continued)
ꢀ AC power connection
ꢀ Demonstration mode
After checking all the connections have been made correctly, plug
the AC power cord of this unit into the AC outlet. If you plug in the unit
first, the unit will enter the demonstration mode.
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll and the speaker
will light up in flashing mode.
To cancel the demonstration mode:
When the unit is in the power
stand-by mode (demonstration
mode), press the X-BASS/DEMO
button. The unit will enter the low
power consumption mode and the
speaker light up will be off.
AC INPUT
AC outlet
(AC 120 V, 60 Hz)
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the
X-BASS/DEMO button again.
Notes:
ꢁThe unit will start the tape initialization when plugged in to the AC
outlet. During this process, initializing sound will be heard and the
unit cannot be turned on. Wait until the process is finished.
ꢁUnplug the AC power cord from the AC outlet if the unit will not be
in use for a prolonged period of time.
Note:
When the power is on, the X-BASS/DEMO button can be used to
select the extra bass mode.
ꢀ Outdoor FM antenna
Use an outdoor FM antenna if you require better reception. Consult
your dealer.
Cooling fan:
The main unit is built with a cooling fan at the rear of the unit for
improved cooling. Please do not cover the opening of the fan with
any obstacles, as this will block proper ventilation.
Outdoor
FM antenna
AC INPUT
75 ohms
coaxial cable
Note:
When an outdoor FM antenna is used, disconnect the supplied FM
antenna wire.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
CD-MPX850
Notes concerning use:
ꢁReplace the batteries if the operating distance is reduced or if the
operation becomes erratic.
ꢁPeriodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
ꢁExposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.
ꢁKeep the remote control away from moisture, heat, shock, and
vibrations.
ꢀ Battery installation
Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
1
2
Open the battery cover.
Insert the batteries according to the direction indicated in
the battery compartment.
When inserting or removing the batteries, push them toward the
battery terminals.
Close the battery cover.
3
ꢀ Test of the remote control
Check the remote control after checking all the connections (see
pages 10 - 12).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy music.
Remote sensor
Precautions for battery use:
ꢁReplace all old batteries with new ones at the same time.
ꢁDo not mix old and new batteries.
ꢁRemove the batteries if the unit will not be used for long periods
of time. This will prevent potential damage due to battery leakage.
Caution:
ꢁDo not use rechargeable batteries (nickel-cadmium battery, etc.).
ꢁInstalling the batteries incorrectly may cause the unit to
malfunction.
Battery removal:
Open the battery cover and pull up the battery to take out.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
General control
CD-MPX850
ꢀ Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
ꢀ Volume control
Main unit operation:
When the VOLUME control is turned
clockwise, the volume will increase.
When it is turned counterclockwise, the
.....
0
30 MAXIMUM
volume will decrease.
Remote control operation:
Press the VOLUME (+ or –) button to in-
crease or decrease the volume.
ꢀ Equalizer
When the power is first turned on, the unit will enter FLAT mode.
When the EQUALIZER MODE button is pressed, the current mode
setting will be displayed. To change to a different mode, press the
EQUALIZER MODE button repeatedly until the desired sound mode
appears.
In CD/TUNER/TAPE mode
In GAME/VIDEO mode
FLAT
No equalization.
For rock music.
FLAT
No equalization.
For rock music.
ROCK
ROCK
ꢀ To turn the power on
Press the ON/STAND-BY button to turn the power on.
CLASSIC For classical music.
ACTION For action games.
SPORTS For sports games.
CLASSIC For classical music.
POPS
For pop music.
VOCALS Vocals are enhanced.
For jazz.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
For car racing games.
RACING
JAZZ
ꢀ Illumination light control
When the power is turned on, light illuminates around the display.
To turn on/off the light, hold down the CLEAR/DIMMER button on
the remote control for 2 seconds or more.
Note:
If the EQUALIZER MODE button is pressed in the surround mode, it
will be canceled automatically.
ꢀ Speaker light up control
The speaker will light up according to the level of the music source
played back. To turn on/off the light, hold down the CLEAR/DIMMER
button on the remote control for 2 seconds or more.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock (Remote control only)
CD-MPX850
5 Press the
or
button to adjust the hour and
then press the MEMORY button.
Press the
or
button once to advance the time by
1 hour. Hold it down to advance continuously.
6 Press the
or
button to adjust the minutes and
then press the MEMORY button.
In this example, the clock is set for the 12-hour (AM 12:00) display.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
Press the
or
button once to advance the time by
1 minute. Hold it down to change the time in 5-minutes inter-
vals.
To confirm the time display:
3 Within 10 seconds, press the
or
button to
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
select “CLOCK”, and press the MEMORY button.
The time display will appear for about 10 seconds.
[When the power is on]
Press the CLOCK/TIMER button.
Within 10 seconds, press the
time.
or
button to display the
4 Press the
or
button to select 12-hour or 24-
The time display will appear for about 10 seconds.
hour display and then press the MEMORY button.
Note:
The “CLOCK” will appear or time will flash to confirm the time
display when the AC power supply is restored after a power failure
or unplugging the unit. If incorrect, readjust the clock as follows.
To readjust the clock:
“AM 12:00”
“AM 0:00”
“0:00”
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
Perform “Setting the clock” from step 1. If the “CLOCK” does not
appear in step 3, step 4 (for selecting the 12-hour or 24-hour
display) will be skipped.
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
To change the 12-hour or 24-hour display:
1
Clear all the programmed contents. [Refer to “Clearing all the
memory (reset)” on page 40 for details.]
Perform “Setting the clock” from step 1.
The 24-hour display will appear.
(0:00 - 23:59)
2
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a CD or MP3/WMA disc
CD-MPX850
This system can play back a standard CD, CD-R/RW in the CD format
and CD-R/RW with MP3 or WMA files, but cannot record on them.
Auto power on function:
When you press any of the following buttons, the unit turns on.
Some audio CD-R and CD-RW discs may not be playable due to the ꢁCD button (main unit and remote control): The unit turns on and
state of the disc or the device that was used for recording.
the “CD” function is activated.
ꢁCD
/
button on the remote control: The unit turns on and CD
MP3:
playback starts (regardless of the last function).
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3.
ꢁ
/
button on the main unit: The unit turns on and playback of
the last function starts (CD,TAPE,TUNER,GAME/VIDEO).
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
ꢁThis system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
Auto power off function:
In the stop mode of CD, MP3 or WMA operation, the main unit enters
the stand-by mode after 15 minutes of inactivity.
ꢁDuring VBR file playback, time counter in the display may differ
from its actual playback time.
WMA:
WMA files are Advanced System Format files that include audio
files which are compressed with Windows Media Audio codec.
WMA is developed by Microsoft as an audio format file for Win-
dows Media Player.
ꢁ“MP3” or “WMA” indicator will light up after the unit reads infor-
mation on an MP3 or WMA disc.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPX850
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Press the 1 button and within 5 seconds, press the
button to open the disc tray 1.
4 Place the disc on the disc tray 1, label side up.
Be sure to place 3" (8 cm) disc in the middle of the disc trays.
5" (12 cm)
3" (8 cm)
/
5 Press button to close the disc tray 1.
MP3 indicator
WMA indicator
[CD]
[MP3/WMA]
Total number of
tracks on the disc time of the disc of folders
Total playing
Total number Total number
of files
ꢁDue to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
6 You can place discs on the trays 2 - 5 by following steps
3 - 5.
7 Press the
/
button to start playback.
Disc play indicator
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPX850
Listening to a CD or MP3/WMA disc (continued)
ꢁPlayback will begin from track 1 on disc 1. After that disc finishes
ꢀ Various disc functions
playing, the next disc will automatically play.
ꢁAfter the last track on the fifth disc is played, the unit will stop
automatically.
ꢁWhen there is no disc in one of the disc trays (1 - 5), the empty
tray will be skipped to the next tray with a disc.
Function
Main unit
Remote
control
Operation
Play
Press in the stop
mode.
To exchange other discs while playing a disc:
Press one of the 1 - 5 buttons for the stopped disc and within 5
seconds, press the button and exchange discs.
Stop
Press in the playback
mode.
To remove the discs:
In the stop mode, press the 1 - 5 buttons and within 5 seconds,
press the button.
Pause
Press in the playback
mode. Press the
/
button to resume play-
back from the paused
point.
Caution:
ꢁDo not place two discs in a same tray.
ꢁDo not play discs of special shapes (heart, octagon, etc.) as it
may cause malfunctions.
Track up/
Track down
Press in the playback
or stop mode.
ꢁDo not push the disc tray while it is moving.
ꢁIf the power fails while the tray is open, wait until the power is
restored.
ꢁIf the disc tray is stopped with force, “ER-CD20” will appear on the
display for 3 seconds and the unit will not function. If this occurs,
press the ON/STAND-BY button to enter the power stand-by
mode and then turn the power on again.
If you press the button
in the stop mode,
press the
/
button
to start the desired
track.
Press and hold down
in the playback mode.
Release the button to
resume playback.
Fast for-
ward/Fast
reverse
ꢁIf TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
ꢁIf a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPX850
Notes for CD:
ꢀ To change the display (MP3/WMA discs only)
ꢁTrack up/track down is possible only within individual discs.
ꢁFast forward/fast reverse is possible only within individual discs.
ꢁWhen the end of the last track is reached during fast forward,
“END” will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
While a disc is playing, press the DISPLAY
button.
Each time the button is pressed, the display
will change as follows.
Notes for MP3/WMA discs:
ꢁTrack up/track down is possible only within individual discs.
ꢁThe sound is heard during fast forward/fast reverse with a CD, but
not with an MP3/WMA disc. For fast forward or fast reverse of an
MP3/WMA disc, refer to playback time on the display.
ꢁFast forward/fast reverse is possible only within individual tracks.
ꢁWhen the end of the track is reached during fast forward, the next
track will be played. Playback of the track will begin when its be-
ginning is reached during fast reverse.
Track number
Elapsed
Folder name
playback time
File name
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced CD or MP3/WMA disc playback
CD-MPX850
ꢀ To specify a disc to play
ꢀ Direct track search
You can play a disc by specifying the disc number.
By using the direct search buttons, the desired tracks on the current
disc can be played.
1 Press one of the 1 - 5 buttons to select the desired disc.
Use the direct search buttons on
the remote control to select the
desired track while playing the
selected disc.
Selected track number
Selected disc number
ꢁThe direct search buttons allow you to select up to number 9.
2 Within 5 seconds, press the
/
button on the main unit.
ꢁWhen selecting number 10 or higher, use the “+10” button.
A. For example, to choose 13
1 Press the “+10” button once.
2 Press the “3” button.
B. For example, to choose 30
1 Press the “+10” button three times.
2 Press the “0” button.
If the direct search buttons are pressed while the disc is stopped,
ꢁPlayback will begin from track 1 on the chosen disc.
ꢁAfter the last track on the last disc is played, the unit stops auto-
matically.
press the
/
button to start the desired track on the current disc.
Notes:
Note:
ꢁA track number higher than the number of tracks on the disc
cannot be selected.
If a disc tray with no disc is selected, playback will not start and the
disc indicator will disappear.
ꢁDuring random play, direct search is not possible.
To stop playback:
Press the (CD ) button.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPX850
ꢀ Repeat play
Repeat play can play all 5 discs, all tracks on a chosen disc, or a pro-
grammed sequence continuously.
ꢀ Random play
The tracks on the disc(s) can be played in random order automatically.
To random play all tracks on up to 5 discs:
To repeat one disc:
Press the RANDOM button on the remote control.
Press the
/
button twice.
To repeat all tracks on up to 5 discs:
Press the button three times.
/
To repeat desired tracks:
Perform steps 1 - 6 in “Programmed play” section on page 22 and
then press the
/
button twice.
To cancel random play:
Press the
/
button.
“R” will disappear
Notes:
ꢁIf you press the
button during random play, you can move to
the next track by the random operation. On the other hand, the
button does not allow you to move to the previous track. The be-
ginning of the track being played will be located.
ꢁIn random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
To cancel repeat play:
Press the button again.
” will disappear.
/
“
Caution:
After performing repeat or random play, be sure to press the (CD
) button. Otherwise, the disc(s) will play continuously.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPX850
Advanced CD or MP3/WMA disc playback (continued)
ꢀ Programmed play
To clear the programmed selections:
Press the CLEAR/DIMMER button on the
remote control while the “MEMORY” indicator
is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track
programmed.
You can choose up to 32 selections for playback in the order you like.
1 While in the stop mode, press the
MEMORY button to enter the
programming save mode.
To cancel the programmed play mode:
While in the stop mode and the “MEMORY” indicator is lit, press the
CLEAR/DIMMER button on the remote control. The “MEMORY”
indicator will disappear and all the programmed contents will be
cleared.
2 Press one of the 1 - 5 buttons
to select the desired disc.
Adding tracks to the program:
If a program has been previously stored, the “MEMORY” indicator
will be displayed. Then follow steps 1 - 6 to add tracks. The new
tracks will be stored after the last track of the original program.
Selected disc number
3 Press the direct search buttons
on the remote control to select
the desired track.
To check which tracks are programmed:
While the unit is stopped in the programmed play mode, press the
or
button.
Selected track number
Notes:
You can also select a track by pressing the
or
button.
ꢁWhen a disc with programmed tracks is ejected, the program is
automatically canceled.
ꢁEven if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed
selections will not be cleared.
4 Press the MEMORY button to
save the track number.
5 Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be
programmed.
ꢁDuring the program operation, random play is not possible.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
6 Press the (CD ) button.
The total number in memory will
appear.
7 Press the
/
button to start playback.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA navigation (only for MP3/WMA files)
CD-MPX850
MP3/WMA navigation:
You can search and play files by folder or title. For example, when
you assign three titles to a file, enter genre (such as jazz) as title 1,
album name as title 2, and music title as title 3 to search the file by
any title.
ꢁYou can search and play files by folder or title 1/2/3 within one
MP3/WMA disc (see page 24).
ꢁBy entering a name, you can search files by folder or title 1/2/3
within one MP3/WMA disc (see page 25).
ꢁFolders or titles can be programmed within one MP3/WMA disc
(see page 26).
When you enter file names on your PC, connect words with hyphens.
This product recognizes the first word as title 1, second one as title
2, and third one as title 3. Up to three words can be recognized.
Example:
Folder
Title 2
Title 1
Title 3
Folder
(File name)
Title 2
Title 1
Title 3
AAA
(POPULAR-HITS 1-A MUSIC.mp3)
(POPULAR-HITS 2-B MUSIC.mp3)
BBB
CCC
(JAZZ-HITS 1-A MUSIC.mp3)
(JAZZ-HITS 2-B MUSIC.mp3)
Notes:
ꢁMP3 files must have the extension “.mp3”.
ꢁWMA files must have the extension “.wma”.
ꢁUp to 100 folders or 300 files can be read on the unit. If either limit
is exceeded, no more folders/files are displayed.
ꢁThis unit recognizes and displays up to 48 characters for folder
names, and up to 32 characters for title 1/2/3.
(ROCK-HITS 1-A MUSIC.mp3)
(ROCK-HITS 2-B MUSIC.mp3)
(ROCK-HITS 3-C MUSIC.mp3)
(ROCK-HITS 4-D MUSIC.mp3)
ꢁAll file/folder names appear in uppercase.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPX850
MP3/WMA navigation (only for MP3/WMA files) (continued)
ꢀ File search (by folder or title 1/2/3)
You can search and play files by folder or title 1/2/3 within one MP3/
WMA disc.
7 Use the or cursor button to scroll and select a folder
(or title), and then press the ENTER button.
1 Press one of the
1 -
5 buttons to select a disc tray
Folder name
containing an MP3/WMA disc.
2 Press the button, and the unit starts to read the MP3
/
disc.
If you press the
files in the selected folder (or title) are played.
/
button instead of the ENTER button, all
3 Press the CD button to stop playback.
“NAVI READ” appears and the display shows the total number
of folders and files on the selected disc.
8 Use the or cursor button to scroll and select a file.
File name
MP3 indicator
WMA indicator
Total number Total number
of folders
of files
9 Press the
/
button to start playback.
4 Press the NAVIGATION button.
The unit plays from the selected file to the last file in the select-
ed folder (or title), and the previous display returns.
5 Press the
,
,
or
cursor but-
Folder Title 1
File search by title 1/2/3:
ꢁIn step 5, select “T-1”, “T-2” or “T-3” and follow the same steps as
file search by folder.
ton on the remote control to select
“FOL”, “T-1”, “T-2” or “T-3”. To
search files by folder name, select
“FOL” (will flash).
MP3
ꢁThe unit searches all files on the disc, regardless of the folder.
Title 2 Title 3
The following steps describe file search by folder:
6 Press the ENTER button.
To stop playback:
Press the CD button.
The total number of folders (or titles) appears for 2 seconds,
and names of the first 2 folders (or titles) are displayed.
To exit the MP3/WMA navigation mode:
In the stop mode, press the CD button.
Folder name
Notes:
ꢁIn the MP3/WMA navigation mode, direct play and direct search
functions are disabled.
ꢁIf a folder, title or file name does not appear, or appears incorrect-
ly, remove and reinsert the disc and try again.
ꢁIf you press the RANDOM button in the stop mode, the MP3/WMA
navigation mode will be canceled.
ꢁ
The NAVIGATION button allows you to go one step back.
ꢁPress the DISPLAY button to
check the number of files.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPX850
ꢀ Character search (for folder or title 1/2/3)
By entering a name, you can search files by folder or title 1/2/3 within
one MP3/WMA disc.
8
9
When finished, press the ENTER button. The unit search
es for the same name within folders (or titles).
1 Perform steps 1 - 3 in “File search (by folder or title 1/2/3)”
on page 24.
2 Press the NAVIGATION button.
If the search word is not in the folder (or title) name, “NOT
FOUND” appears and the menu returns.
3 Press the
,
,
or
cursor
Folder Title 1
Use the or cursor button to scroll and select a folder
(or title).
button on the remote control to
select “FOL”, “T-1”, “T-2” or “T-3”.
To search files by folder name,
select “FOL” (will flash).
10 Press the
/
button to start playback.
Title 2 Title 3
All files in the selected folder (or title) are played, and the pre-
vious display returns.
4 Press the CHARACTER button for 2 seconds.
The display will be ready for editing characters.
1st row: String table
To exit the MP3/WMA navigation mode:
In the stop mode, press the CD button.
Notes:
2nd row: Input editor (8 digits)
ꢁThe unit searches regardless of the case, and names found will
appear in uppercase.
ꢁSome symbols do not appear properly.
5 Press the
alphabet.
or
or
cursor button to select the desired
Character entry with direct buttons:
The direct buttons on the remote
control can also be used for charac-
ter entry.
In step 5 on the left, use buttons 0 -
9 to enter alphabets.
Alphabet types change as you
press a button.
Press the
display.
button to go to the next page of character
6 Press the CHARACTER button and the active character will
be entered in the 2nd row of the display.
For example, press “2” four times to enter “C”.
To delete an entered character, move the cursor to the
2
A
B
C
character with the
or
button and press the CLEAR/
DIMMER button on the remote control.
Characters:
7 Repeat steps 5 and 6 to enter characters.
In the folder (or title) name search, you do not have to enter the
full name. The unit searches for names beginning with the
entered characters.
1
2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7 PQRS 8 TUV 9 WXYZ
0
: indicates a space.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPX850
MP3/WMA navigation (only for MP3/WMA files) (continued)
To check, add or delete programmed contents:
In the stop mode, select a folder (or title) with the
button. If the folder (or title) is programmed, “MEMORY” flashes.
ꢀ Programmed play (for folder, title 1/2/3)
Folders or titles can be programmed within one MP3/WMA disc.
Folder, title 1, title 2 and title 3 cannot be programmed together
simultaneously.
or
cursor
1 Perform steps 1 - 3 in “File search (by folder or title 1/2/3)”
on page 24.
Flashes if the folder (or title)
is programmed
2 Press the NAVIGATION button.
3 Press the
,
,
or cursor button on the remote control
to select “FOL”, “T-1”, “T-2” or “T-3” and then press the
ENTER button.
ꢁWhen you press the MEMORY button with “MEMORY” flashing,
the folder (or title) is removed from the program.
ꢁIf you press the MEMORY button with “MEMORY” off, the folder
(or title) is added to the program.
ꢁTo clear all programs, press the CLEAR/DIMMER button in the
stop mode.
The total number of folders (or titles) appears for 2 seconds,
and names of the first 2 folders (or titles) are displayed.
4 Press the or cursor button to select the desired folder
(or title) and then press the MEMORY button.
To exit the MP3/WMA navigation mode:
In the stop mode, press the CD button.
ꢁThe programmed contents are cleared.
Notes:
ꢁThe programmed contents are cleared when you eject a disc,
play another disc, switch the function, or enter the stand-by mode
with the ON/STAND-BY button.
ꢁIf you press the RANDOM button in the stop mode, the MP3/
WMA navigation mode will be canceled.
The folder (or title) is memorized with all the files.
5 Repeat step 4 for other folders (or titles).
Up to 10 folders (or 10 titles) can be programmed.
If tracks are programmed using track numbers (see
“Programmed play” on page 22):
6 Press the
/
button to start playback.
In the MP3/WMA navigation mode, only program by folder (or title)
name are played. When you exit the mode, the program by folder (or
title) name are cleared.
When you exit the MP3/WMA navigation mode, program by track
number are canceled.
(Program by track number are cleared when you remove the disc.)
Programmed play will always start from the smallest folder (or
title) number.
To stop playback:
Press the CD button.
ꢁThe programmed contents are not cleared.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the radio
CD-MPX850
ꢀ Tuning
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
3 Press the TUNING ( or ) button to tune in to the desired
station.
Manual tuning:
Press the TUNING ( or ) button as many times as required
to tune in to the desired station.
Auto tuning:
When the TUNING ( or ) button is pressed for more than 0.5
seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
Notes:
ꢁWhen radio interference occurs, auto scan tuning may stop auto-
matically at that point.
ꢁAuto scan tuning will skip weak signal stations.
ꢁTo stop the auto tuning, press the TUNING ( or ) button again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the “ST” indicator.
ꢁ“ ” will appear when an FM broadcast is in stereo.
ꢁIf the FM reception is weak, press the TUNER (BAND) button to
extinguish the “ST” indicator. The reception changes to monaural,
and the sound becomes clearer.
Auto power on function:
When you press any of the following buttons, the unit turns on.
ꢁTUNER (BAND) button (main unit and remote control): The unit
turns on and the “TUNER” function is activated.
FM stereo mode indicator
ꢁ
/
button on the main unit: The unit turns on and playback of
the last function starts (CD, TAPE, TUNER, GAME/VIDEO).
FM stereo receiving indicator
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the radio (continued)
CD-MPX850
ꢀ Memorizing a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
ꢀ To recall a memorized station
Press the PRESET ( or ) button for less than 0.5 seconds to se-
lect the desired station.
ꢀ To scan the preset stations
The stations saved in memory can be scanned automatically.
(Preset memory scan)
1 Perform steps 1 - 3 in “Tuning” on page 27.
2 Press the MEMORY button to enter the preset tuning
saving mode.
1
Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2
Press the PRESET ( or ) button again when the desired
station is located.
3 Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4 Within 30 seconds, press the MEMORY button to store that
station in memory.
If the “MEMORY” and preset number indicators go out before
the station is memorized, repeat the operation from step 2.
5 Repeat steps 1 - 4 to set other stations, or to change a
preset station.
ꢀ To erase entire preset memory
When a new station is stored in memory, the station previously
memorized for that preset channel number will be erased.
1
Press the ON/STAND-BY button to enter the stand-by mode.
While pressing down the button and the button, press
the TUNER (BAND) button until “TUNER CL” appears.
2
Note:
The backup function protects the memorized stations for a few hours
should there be a power failure or the AC power cord become discon-
nected.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a cassette tape (TAPE 1 or TAPE 2)
CD-MPX850
ꢀ Tape playback
Before playback:
ꢁFor playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not rec-
ommended.)
ꢁDo not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
1 Press the ON/STAND-BY button to turn the power on.
2 Open the cassette com-
partment by pushing the
area marked “ ”.
ꢁBefore loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
3 Load a cassette into the
TAPE 1 compartment or
TAPE 2 compartment
with the side to be
played facing toward
you.
4 Press the TAPE (1
want to listen to.
2) button to select the cassette you
5 Press the
/
(TAPE
)
to start playback.
Tape play indicator
Auto power on function:
When you press any of the following buttons, the unit turns on.
ꢁTAPE (1 2) button (main unit and remote control): The unit turns
on and the “TAPE” function is activated.
ꢁTAPE button (remote control): The unit turns on and the “TAPE”
function is activated.
ꢁ
/
button (main unit): The unit turns on and playback of the
last function starts (CD,TAPE,TUNER,GAME/VIDEO).
Auto power off function:
In the stop mode of tape operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording on a cassette tape
CD-MPX850
Listening to a cassette tape (TAPE 1 or
TAPE 2) (continued)
Before recording:
ꢁWhen recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
ꢀ Various tape functions
Function
Main unit
Remote
control
Operation
ꢁSHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
Playback
Press in the stop
mode.
ꢁThe volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
ꢁFor recording, use only normal tapes. Do not use metal or
CrO tapes.
Stop
Press in the playback,
fast forward or rewind
mode.
Erase-prevention tab of cassette tapes:
ꢁWhen recording on a cassette tape, make sure that the erase-
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
Fast
forward/
Rewind
Press in the playback
or stop mode.
ꢁTo protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
(TAPE 2
only)
Side A
Caution:
ꢁTo remove the cassette, press the (TAPE ) button, and then
open the compartment.
ꢁBefore changing from one tape operation to another, press the
(TAPE ) button.
Tab for side A
Tab for side B
ꢁIf a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not open.
In this case, wait until the power is restored.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPX850
ꢀ Recording from a CD or MP3/WMA disc
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
4 Press the
button.
Recording will be paused.
5 Press one of the 1 - 5 buttons to select the desired disc.
6 Within 5 seconds, press the
/
button to start recording.
ꢁRecording is started from the selected disc. When the play-
back of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
ꢁPlayback of the disc will start approximately 7 seconds after
the tape starts.
To stop recording:
Press the (TAPE ) button.
The disc and tape will stop.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPX850
Recording on a cassette tape (continued)
To perform programmed recording:
ꢀ Dubbing from tape to tape
1 Program discs and tracks (see page 22).
You can record from TAPE 1 to TAPE 2.
2 Press the
3 Press the
button.
1 Press the ON/STAND-BY button to turn the power on.
/
(TAPE ) button to start recording.
2 Load
a
prerecorded cassette
To stop recording:
Press the (TAPE ) button.
The disc and tape will stop.
into the TAPE 1 cassette com-
partment. Insert a blank tape
into the TAPE 2 cassette com-
partment.
ꢀ Recording from the radio
1 Tune in to the desired station (see page 27).
TAPE 1
TAPE 2
2 Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
It is recommended that the recording tape is the same length as
the master tape.
Wind past the leader of the tape, on which recording cannot be
performed.
3 Press the TAPE (1
the display.
2) button until “TAPE 1” appears on
3 Press the
button.
4 Press the
button.
Recording will be paused.
Recording will be paused.
4 Press the
/
(TAPE ) button to start recording.
5 Press the
/
(TAPE ) button to start dubbing.
To interrupt recording:
To stop dubbing:
Press the
button.
Press the (TAPE ) button.
To resume recording, press the
/
(TAPE ) button.
TAPE 1 and TAPE 2 will stop simultaneously.
To stop recording:
ꢀ Erasing recorded tapes
Press the (TAPE ) button.
1
Load the tape to be erased into the TAPE 2 cassette compart-
ment with the side to be erased facing toward you.
Press the TAPE (1 2) button until “TAPE 2” appears on the dis-
play.
Note:
If you hear a whistling noise while recording an AM station, move the
AM loop antenna.
2
3
4
Press the
Press the
button.
(TAPE ) button to start erasing.
/
Note:
Make sure that the TAPE 1 is not in use.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer and sleep operation (Remote control only)
CD-MPX850
Timer playback:
The unit turns on and plays the desired source (CD, tuner, tape) at a
preset time.
Timer recording:
The unit turns on and starts recording from the tuner at the preset
time.
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
Once timer: Once timer play or once timer recording works for
one time only at a preset time.
For example, if you are away but want to record a program on a
radio station.
ꢀ Timer playback or timer recording
Before setting timer:
Daily timer: Daily timer play or daily timer recording works at
1 Check that the clock is set to the correct time (refer to page 15).
If it is not set, you cannot use the timer function.
2 For timer playback: Load a cassette or discs to be played.
the same preset time every day.
For example, set the timer as a wake-up call every morning.
For timer recording: Load a cassette for recording in the
cassette compartment.
Using the once timer and daily timer in combination:
For example, use the once timer to record a radio program, and use
the daily timer to wake up.
1
2
Set the daily timer (pages 33 - 35).
Set the once timer (pages 33 - 35).
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
1 minute or more
Daily timer
3 Within 10 seconds, press the
or
button to
select “ONCE” or “DAILY”, and press the MEMORY button.
Once timer
Start
Note:
Stop
Start
Stop
Set the clock to the correct time if “ONCE” or “DAILY” does not
appear.
When set times for the daily timer and once timer overlap, the once
timer takes priority. Allow an interval of at least 1 minute between
operations.
Continued to the next page
33
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPX850
Timer and sleep operation (Remote control only) (continued)
4 Within 10 seconds, press the
or
button to se-
9
Switch input with the
press the MEMORY button.
or
button, and then
lect “ONCE SET” or “DAILY SET”, and press the MEMORY
button.
To select the timer playback source: CD, TUNER, TAPE 1 or
TAPE 2.
To select the timer recording source: TUNER.
ꢁWhen you select the tuner, select a station by pressing the
or
button, and then press the MEMORY but-
5 Press the
or
button to select “PLAY” or
ton.
“REC”, and press the MEMORY button.
ꢁIf a station has not been programmed, “NO PRESET” will
be displayed and timer setting will be canceled.
White
Red
10 Adjust the volume using the VOLUME control, and then
press the MEMORY button.
Do not turn the volume up too high.
The illustrations show the daily timer setting.
11 Press the ON/STAND-BY button to enter the power stand-
by mode.
6 Press the
or
button to adjust the hour and
then press the MEMORY button.
The “TIMER” indicator lights up and the unit is ready for timer
playback or timer recording.
The illustrations show the timer playback setting in the daily tim-
er mode.
7 Press the
or
button to adjust the minutes and
then press the MEMORY button.
8 Set the time to finish as in steps 6 and 7 above.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPX850
Checking the timer setting in the timer stand-by mode:
12 When the preset time is reached, playback or recording
will start.
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
“ONCE” or “DAILY”, and press the MEMORY button.
The volume will increase gradually until it reaches the preset
volume.
3 Within 10 seconds, press the or button to select
“ONCE CALL” or “DAILY CALL”, and press the MEMORY button.
The unit returns to the timer stand-by mode after displaying the
settings in order.
13 When the timer end time is reached, the system will enter
the power stand-by mode automatically.
Once timer:
Canceling the timer setting in the timer stand-by mode:
The timer will be canceled.
Daily timer:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
“ONCE” or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the or button to select
“ONCE OFF” or “DAILY OFF”, and press the MEMORY button.
Timer will be canceled (the setting will not be canceled).
The timer will operate at the same time every day. It will
continue until the daily timer setting is canceled. Cancel the
daily timer when it is not in use.
Note:
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To reuse the
same setting, perform the following operations.
When performing timer playback or recording using another unit con-
nected to the GAME INPUT jacks, select “GAME” in step 9.
This unit will turn on or enter the power stand-by mode automatically,
however, the connected unit will not turn on or off.
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
“ONCE” or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the or button to select
“ONCE ON” or “DAILY ON”, and press the MEMORY button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPX850
Timer and sleep operation (Remote control only) (continued)
To cancel the sleep operation:
ꢀ Sleep operation
The radio, CD, MP3/WMA disc and cassette tape can all be turned
off automatically.
Press the ON/STAND-BY button while “SLEEP” is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1 Play back the desired sound source.
2 Press the CLOCK/TIMER button.
3 Within 10 seconds, press the
1
2
While “SLEEP” is indicated, press the CLOCK/TIMER button.
Within 10 seconds, press the or button to select
“SLEEP OFF”, and press the MEMORY button.
or
button to select
“SLEEP”, and press the
MEMORY button.
ꢀ To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
4 Press the
or
button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)
ꢁ3 hours - 5 minutes 5-minute intervals
ꢁ5 minutes - 1 minute 1-minute intervals
Sleep and timer recording:
For example, you can fall asleep listening to the CD and record radio
programs while sleeping.
5 Press the MEMORY button.
“SLEEP” will appear.
1
2
Set the sleep time (see left, steps 1 - 5).
While the sleep timer is set, set the timer playback or recording
(steps 2 - 10, pages 33 - 34).
6 The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
Timer playback or
recording setting
The volume will be turned down 1 minute before the sleep
operation finishes.
Sleep timer setting
End time
Desired time
To confirm the remaining sleep time:
1 minute - 3 hours
1
2
While “SLEEP” is indicated, press the CLOCK/TIMER button.
Within 10 seconds, press the
“SLEEP X : XX”.
or
button to select
Sleep operation will
automatically stop.
Timer playback or recording
start time
“X : XX” is remaining sleep time.
Caution:
ꢁThe remaining sleep time is displayed for about 10 seconds.
ꢁYou can change the remaining sleep time while it is displayed by
pressing the MEMORY button.
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the sleep
timer setting, timer playback or recording will not be possible.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Enhancing your system
CD-MPX850
The connection cord is not included. Purchase a commercially
available cord as shown below.
ꢀ Listening to playback sounds of Game, VCR,
DVD, etc.
GAME or VCR, DVD, etc.
1 Connect a video game system, VCR, DVD, etc. to the front
GAME INPUT (VIDEO, AUDIO L and R) jacks.
2 Connect a TV to the rear VIDEO OUT jacks.
Switch the TV input to auxiliary.
To the line output jacks
3 Press the ON/STAND-BY button to turn the power on.
4 Press the GAME/VIDEO button.
5 Play the connected equipment.
White
Yellow
Yellow White Red
You can enjoy sounds from the supplied speakers and images
on the TV.
Red
Note:
To prevent noise interference, place the unit away from the television.
RCA cord
(not supplied)
Video cable
(not supplied)
Auto power on function:
When you press any of the following buttons, the unit turns on.
ꢁGAME/VIDEO button (main unit and remote control): The unit
turns on and the “GAME” function is activated.
ꢁ
/
button on the main unit: The unit turns on and playback of
TV
the last function starts (CD,TAPE,TUNER,GAME/VIDEO).
ꢀ To record on a tape from game, VCR, etc.
1 Insert a cassette in the TAPE 2 cassette compartment.
2 Press the GAME/VIDEO button.
To video
input jack
Yellow
3 Press the
4 Press the
button.
/
(TAPE ) button.
Video cable
(not supplied)
Yellow
AC INPUT
5 Start the game system, VCR, etc.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting chart
CD-MPX850
Enhancing your system (continued)
Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following before
calling your authorized SHARP dealer or service center.
ꢀ Headphones
ꢁBefore plugging in or unplugging the headphones, reduce the
volume.
ꢁBe sure your headphones have a 1/8" (3.5 mm) diameter plug and
impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
ꢀ General
ꢁPlugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME control.
Symptom
ꢁThe clock is not set to the ꢁDid a power failure occur? Reset
correct time. the clock. (Refer to page 15.)
ꢁWhen a button is pressed, ꢁSet the unit to the power stand-
Possible cause
the unit does not respond.
by mode and then turn it back on.
ꢁIf the unit still malfunctions, reset
it. (Refer to page 40.)
ꢁNo sound is heard.
ꢁIs the volume level set to “0”?
ꢁAre the headphones connected?
ꢁAre the speaker wires discon-
nected?
ꢀ CD player
Symptom
Possible cause
ꢁPlayback does not start. ꢁIs the disc loaded upside down?
ꢁPlayback stops in the mid- ꢁDoes the disc satisfy the stan-
dle or is not performed
properly.
dards?
ꢁIs the disc distorted or
scratched?
ꢁPlayback sounds are
skipped, or stopped in the
middle of a track.
ꢁIs the unit located near excessive
vibrations?
ꢁIs the disc very dirty?
ꢁHas condensation formed inside
the unit?
38
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPX850
ꢀ Cassette deck
ꢀ Tuner
Symptom
Possible cause
Symptom
Possible cause
ꢁCannot record.
ꢁIs the erase-prevention tab
removed?
ꢁThe radio makes unusual ꢁIs the unit placed near the TV or
noises continuously.
computer?
ꢁCannot record tracks with ꢁIs it a normal tape? (You cannot
ꢁIs the FM antenna or AM loop
antenna placed properly? Move
the antenna away from the AC
power cord if it's located nearby.
proper sound quality.
ꢁCannot erase completely.
ꢁSound skipping.
record on a metal or CrO tape.)
ꢁIs there any slack?
ꢁIs the tape stretched?
ꢀ Condensation
ꢁCannot hear treble.
ꢁAre the capstans, pinch rollers,
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
or heads dirty?
ꢁSound fluctuation.
ꢁCannot remove the tape. ꢁIf a power failure occurs during
playback, the heads remain
engaged with the tape. Do not
open the compartment with great
force.
ꢀ Remote control
Symptom
Possible cause
ꢁThe remote control does ꢁIs the AC power cord of the unit
not operate.
plugged in?
ꢁIs the battery polarity correct?
ꢁAre the batteries dead?
ꢁIs the distance or angle
incorrect?
ꢁDoes the remote control sensor
receive strong light?
39
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPX850
Troubleshooting chart (continued)
ꢀ If trouble occurs
ꢀ Before transporting the unit
Remove all CDs from the unit. Make sure there is no CD in the disc
tray. Then, set the unit to the power stand-by mode. Carrying the unit
with discs left inside can damage the unit.
When this product is subjected to strong external interference (me-
chanical shock, excessive static electricity, abnormal supply voltage
due to lightning, etc.) or if it is operated incorrectly, it may malfunc-
tion.
If such a problem occurs, do the following:
ꢀ Care of compact discs
1
2
Set the unit to the stand-by mode and turn the power on again.
If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collec-
tion and player.
Note:
ꢁDo not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
ꢁKeep your discs away from direct sunlight, heat, and excessive
moisture.
ꢁAlways hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the center, along the radius.
If neither operation above restores the unit, clear all the memory by
resetting it.
ꢀ Clearing all the memory (reset)
1
Press the ON/STAND-BY button to enter the power stand-by
mode.
2
While pressing down the
button and the button, press the
TUNER (BAND) button until “CLEAR ALL” appears.
NO
YES
Correct
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD program.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Specifications
CD-MPX850
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
ꢀ Cleaning the tape-handling parts
ꢁDirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
ꢁWhen cleaning the heads, pinch rollers, etc., unplug the unit which
contains high voltages.
ꢀ General
B
C
A
Power source
AC 120 V, 60 Hz
TAPE 1
Power consumption 105 W
Dimensions
Weight
Width: 10-1/4" (260 mm)
Height: 13" (330 mm)
Depth: 12-7/8" (323 mm)
E
B
C
D
TAPE 2
16.5 lbs. (7.5 kg)
ꢀ Amplifier
Output power
Playback head
Capstan
Pinch roller
Erase head
Recording/Playback head
115 watts minimum RMS per channel into 6
ohms from 100Hz to 20 KHz, 10% total
harmonic distortion.
ꢁAfter long use, the deck's heads and capstans may become
magnetized, causing poor sound. Demagnetize these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetizer. Read the demagnetizer's instructions
carefully before use.
Output terminals
Input terminals
Front Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Video output: 1Vp-p
ꢀ Cleaning the CD pickup lens
Game/ Auxiliary (audio signal):
500 mV/ 47 k ohms
In order to ensure proper operation of the CD player, preventative
maintenance (cleaning of the laser pickup lens) should be performed
periodically. Lens cleaners are commercially available. Contact your
local CD software dealer for options.
Game/Video: 1Vp-p
ꢀ Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
ꢁDo not use chemicals for cleaning (gasoline, paint thinner, etc.). It
may damage the cabinet finish.
ꢁDo not apply oil to the inside of the unit. It may cause
malfunctions.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPX850
Specifications (continued)
ꢀ CD player
ꢀ Speaker
Type
5-disc multi-play compact disc player
Type
3-way type speaker system
Signal readout
Non-contact, 3-beam semiconductor laser
pickup
Super tweeter
2" (5 cm) tweeter
6-5/16" (16 cm) woofer
230 W
D/A converter
1-bit D/A converter
20 - 20,000 Hz
Frequency
response
Maximum input
power
Dynamic range
90 dB (1 kHz)
Rated input power 115 W
Impedance
Dimensions
6 ohms
ꢀ Tuner
Width: 7-7/8" (200 mm)
Height: 13" (330 mm)
Depth: 9-1/8" (231 mm)
Frequency range
FM: 87.5 - 108.0 MHz
AM: 530 - 1,720 kHz
Weight
7.3 lbs. (3.3 kg) /each
ꢀ Cassette deck
Frequency
response
50 - 14,000 Hz (normal tape)
Signal/noise ratio
55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
Wow and flutter
0.3 % (WRMS)
42
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original con-
tainer, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof
with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has
been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in
design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING
THE WARRANTIES OF MERCHANTABILITYAND FITNESS FOR USEARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any
warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser.
Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the
purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event
shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone
other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states
do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Model Specific Section
Your Product Model Number & Description:
CD-MPX850 Mini Component System
(Be sure to have this information available when you need service for your Product.)
:
Warranty Period for this Product
One (1) year parts and labor from the date of purchase.
Additional Item(s) Excluded from Warranty Coverage (if any):
Where to Obtain Service:
Non-functional accessories, supplies, and consumable items.
At a Sharp Authorized Servicer located in the United States.
To find a location of the nearest SharpAuthorized Servicer, call Sharp toll free at 1-800-BE-SHARP.
What to do to Obtain Service:
Ship prepaid or carry in your Product to a Sharp Authorized Servicer.
Be sure to have Proof of Purchase available. If you ship the Product, be sure it is insured and
packaged securely.
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP.
SHARP ELECTRONICS CORPORATION
Printed in Malaysia
TINSEA161AWZZ
07B R AS 1
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
Download from Www.Somanuals.com. All Manuals Search And Download.
|