4-187-903-11(1)
Setting Up
LCD
Watching TV
Digital Colour TV
Operating Instructions
Additional Information
KDL-60LX903 / 40LX903
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Checking the accessories..............................................................................................................3
Connecting an antenna (aerial)/Set Top Box/recorder (e.g. DVD recorder)..................................5
Troubleshooting ...........................................................................................................................12
Specifications...............................................................................................................................13
Safety Information........................................................................................................................20
Precautions..................................................................................................................................21
• Operating instructions are built into your BRAVIA TV. Refer to “To use i-Manual” for operation (page 9).
• Before operating the TV, please read “Safety Information” (page 20). Retain this manual for future reference.
2
* For KDL-60LX903, the stand rear cover is
factory-attached to the Table-Top Stand.
Checking the accessories
3
* For KDL-60LX903, the bottom cover is factory-
AC power cord (mains lead) (1)
Cable holder (1) (except KDL-60LX903)
Remote (1)
attached to the TV.
Inserting batteries into the
remote
Size AAA batteries (R3 type) (2)
1
Table-Top Stand (1)
*
(except KDL-60LX903)
Fixing screws for Table-Top Stand
(M5 × 16) (4) (except KDL-60LX903)
Assembling screws for Table-Top Stand
(M5 × 16) (4) (KDL-40LX903 only)
Black spacers (4) (KDL-40LX903 only)
Silver spacers (4) (KDL-60LX903 only)
Screws (M6 × 20) (4) (KDL-60LX903 only)
Stand rear cover (1)*2
Bottom cover (1)*3
3D Glasses (battery included) (2)
Pouch for 3D Glasses (2)
1
* For KDL-40LX903, assemble the Table-Top
Stand with the supplied assembling screws.
Refer to the supplied Table-Top Stand leaflet to
assemble the stand.
1 Remove the protection sheet.
2 Push and slide the cover upward.
3GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
Adjusting the viewing angle of
the TV (except KDL-60LX903)
This TV can be adjusted within the angles
shown below.
Attaching the Table-Top
Stand (except KDL-
60LX903)
1 Refer to the supplied Table-Top Stand
leaflet for proper attachment for some
TV models.
0º
6º
2 Place the TV set on the Table-Top
Stand.
3 Fix the TV to the Table-Top Stand
according to the arrow marks that
guide the screw holes using the
supplied screws.
1
4
Remove screw as
shown.
Install screw into
the top screw hole
of the Table-Top
Stand.
~
2
3
• If using an electric screwdriver, set the tightening
torque at approximately 1.5 N·m {15 kgf·cm}.
4 After all the screws have been
tightened, attach the supplied stand rear
cover to the Table-Top Stand.
Lift up and tilt.
Slide in.
~
• To return to 0°, reverse the above procedure.
4GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• Ensure that there are no objects in front of the TV.
IR Sensor
Connecting an antenna
(aerial)/Set Top Box/
recorder (e.g. DVD recorder)
Connecting a Set Top Box/recorder
(e.g. DVD recorder) with SCART
3D Sync Transmitter
Intelligent Presence Sensor
• Do not expose the Intelligent Presence Sensor to
direct sunlight or other strong light, as
malfunction may occur.
Set Top Box/recorder (e.g. DVD recorder)
~
• Right Angle Type Universal SCART Lead is
recommended for this connection.
Connecting a Set Top Box/recorder
(e.g. DVD recorder) with HDMI
Set Top Box/recorder (e.g. DVD recorder)
(Continued)
5GB
Download from Www.Somanuals.com. All Manuals Search And Download.
~
3 Tie the wood screw and the machine
• For KDL-40LX903, after connecting cables,
install the bottom cover and stand rear cover.
screw with a strong cord (not supplied).
Detaching the terminal cover
Bundling the cables
~
• A cable holder is available for KDL-40LX903. To
bundle the cables, follow steps 3 to 5.
~
• After connecting cables, re-attach the terminal
cover to the TV.
Preventing the TV from
toppling over
~
• Do not bundle the AC power cord (mains lead)
together with other cables.
1 Install a wood screw (4 mm in
diameter, not supplied) in the TV stand.
2 Install a machine screw (M4 × 16, not
supplied) into the screw hole of the TV.
6GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme Sorting: Changes the order of
analogue channels stored in the TV.
Performing the initial set-up
1 Press F/f to select the channel you want
to move to a new position, then press
.
2 Press F/f to select the new position for
the channel, then press
.
~
• You can also tune channels manually.
1 Connect the TV to your AC power
Detaching the Table-Top
Stand from the TV
outlet (mains socket).
2 Check the ENERGY SAVING
~
SWITCH setting is on (z).
• Remove the stand rear cover and bottom cover
prior to detaching the Table-Top Stand.
• Remove the screws guided by the arrow marks
of the TV.
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
3 Press 1 on the TV.
When you switch on the TV for the first
time, the Language menu appears on the
screen.
4
Follow the instructions on the screen.
Digital Auto Tuning: When you select
“Cable”, we recommend that you select
“Quick Scan” for quick tuning. Set
“Frequency” and “Network ID” according
to the information supplied from your cable
provider. If no channel is found using
“Quick Scan”, try “Full Scan” (though it
may take some time).
• Be sure the TV is on the vertical position before
switching on. TV set must not powered on with
LCD panel face down to avoid uneven picture
uniformity.
For a list of compatible cable providers,
refer to the support web site:
DVBC/
7GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
To watch programmes
Turn on the TV.
1
1 Switch ENERGY SAVING SWITCH
2
on (z).
2 Press 1 on the TV to turn on the TV.
GUIDE
Select a mode.
2
3
OPTIONS
HOME
Select a TV channel.
3
Using Digital Electronic Programme
Guide
Press GUIDE in digital mode to display the
programme guide.
z
• The number 5, N, PROG + and AUDIO
buttons on the remote have a tactile dot.
Use the tactile dots as a reference when
operating the TV.
To utilise the TV’s features
HOME button
OPTIONS button
Press to display various operation and setting
screens.
Press to display convenient functions based on
the current input or content.
Picture
Sound
3D Menu
Add to Favourites
PAP
Settings
System Settings
Motionflow
Presence Sensor
Scene Select
Sleep Timer
Headphone Volume
Speakers
TV
8GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To use i-Manual
Operating instructions are built into your BRAVIA
TV and can be displayed on the screen.
To learn more about your TVs features you can
access your i-Manual with the touch of a button.
Press i-MANUAL.
1
1
2
Press G/g/F/f/ to select items.
2
x Welcome to i-Manual
x “BRAVIA” TV Features
x Watching TV
x Fun Features with Connected
Equipment
Introduces how to connect optional equipment.
x Parts Description
Introduces convenient features such as EPG
Guide, Favourites, etc.
x Troubleshooting
Find solutions for your problem.
x Using the Home Menu
Customise your TV settings, etc.
~
x Index
• Images and illustrations may differ from what is displayed on the screen.
(Continued)
9GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To use 3D Glasses
Before use: Remove the battery’s insulating sheet before using the product for the first time.
Parts and components
Pouch (2)
3D Glasses (2)
1 Slide switch
4 IR sensor
Set the switch for a comfortable fit. Set
both the switches on either side for a
comfortable fit. Close the temple frames
slightly inwards to set the switch.
Receive signals from the 3D Sync
Transmitter.
This part receives IR
(infrared rays) from the
3D Sync Transmitter.
Increases the width
of the glasses
IR’s entry angle differs according to
distance or usage environment.
Decreases the width
of the glasses
~
• Please keep this face clean.
2 Battery cover
5 Power button
Detach the cover when replacing the
battery.
Power on: Press once
Power off: Hold power button down for 2
3 LED indicator
seconds
* Auto power off: More than 5 minutes without
IR signal
Flashes one time every 3 seconds: Power
on
Flashes three times every 3 seconds: Low
battery. Battery capacity is almost running
out.
6 Nose pad
Adjust the nose pad for a comfortable fit.
7 Temple frames
Flashes three times: Power off
You can bend (adjust) the temple frames
for a comfortable fit.
10GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the battery
If the LED indicates low battery power, replace the battery. Use a CR2032 battery.
Open the battery cover.
Battery
(CR2032)
Push here
and remove
the battery at
an angle.
Coin, etc.
* Align the • mark and the • ( ) mark.
~
• When opening or closing the battery cover, make sure the coin, etc., is properly inserted in the groove of the
battery cover.
Precautions for use
•
The 3D Glasses are operated by receiving infrared rays from the 3D Sync Transmitter.
Mis-operation may occur if:
– The 3D Glasses do not face the 3D Sync Transmitter
– If there are objects blocking the path between the 3D Glasses and the 3D Sync Transmitter
– If there are other infrared communication devices nearby
Watch the TV using the 3D Glasses, facing squarely towards the TV.
3D effect is inadequate and screen colour will be shifted with lying down position or leaning
your head.
•
•
•
To preserve our environment dispose of used batteries according to your local laws or
regulations.
Safety precautions
•
•
•
•
You should only use this product for watching 3D video images on a compatible Sony television.
Do not drop or modify these 3D Glasses.
If these glasses are broken, keep broken pieces away from your mouth or eyes.
Keep children away when replacing the battery or opening the battery cover. If a child swallows
the battery or battery cover, consult a doctor immediately.
•
•
•
•
•
Do not dispose of the batteries used in 3D Glasses in a fire.
When replacing the battery, insert it using the correct +/– orientation.
Use only the specified battery for this product: Lithium/manganese Battery, CR2032.
Not for use by children without proper adult supervision.
Be careful not to pinch your fingers in hinges of the 3D Glasses when bending the temple frames.
11GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Troubleshooting
Check whether the 1 (standby) indicator is flashing in red.
When the 1 (standby) indicator is flashing
The self-diagnosis function is activated.
1 Count how many times the 1 (standby) indicator flashes between each three second
break.
For example, the indicator may flash three times, go off for three seconds, then flash again three
times.
2 Press 1 on the TV to turn it off, disconnect the AC power cord (mains lead), and inform
your dealer or Sony service centre of how the indicator flashes (number of flashes).
When the 1 (standby) indicator is not flashing
1 Check the items in the tables below. (Also refer to “Troubleshooting” in the i-Manual.)
2 If the problem persists, have your TV serviced by qualified service personnel.
Condition
Explanation/Solution
Picture
There is no picture (screen • Check the antenna (aerial)/cable connection.
• Connect the TV to the AC power (mains), and press 1 on the TV.
• If the 1 (standby) indicator lights up in red, press TV "/1.
is dark) and no sound.
Tiny black points and/or
bright points appear on the
screen.
• The screen is composed of pixels. Tiny black points and/or bright
points (pixels) on the screen do not indicate a malfunction.
General
The TV’s power cannot be • Check if ENERGY SAVING SWITCH is on (z).
turned on.
The TV turns off
automatically (the TV
enters standby mode).
• Check if the “Sleep Timer” is activated, or confirm the
“Duration” setting of “On Timer”.
• Check if the “Idle TV Standby” is activated.
• Check if “Presence Sensor” in “Eco” is activated.
The remote does not
function.
• Replace the batteries.
• Your TV may be in SYNC mode.
Press SYNC MENU, select “TV Control” and then select “Home
(Menu)” or “Options” to control the TV.
The “Parental Lock”
password has been
forgotten.
• Enter 9999 for the PIN code. (PIN code 9999 is always accepted.)
The TV surrounds become • When the TV is used for an extended period, the TV surrounds
become warm.
warm.
You may feel hot when touching there by the hand.
12GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
System
LCD (Liquid Crystal Display) Panel
Panel system
TV system
Analogue: Depending on your country/area selection: B/G/H, D/K, L, I
Digital: DVB-T2/DVB-T/DVB-C
Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input)
Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4
Colour/video system
Channel coverage
Analogue: VHF: E2–E12/UHF: E21–E69/CATV: S1–S20/HYPER: S21–S41
D/K: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69
Digital: VHF/UHF
10 W + 10 W
Sound output
Input/Output jacks
Antenna (aerial) cable
75 ohm external terminal for VHF/UHF
21-pin scart connector (CENELEC standard) including audio/video input, RGB input and TV audio/video
output.
/
AV1
Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio input (phono jacks)
COMPONENT IN
COMPONENT IN
HDMI IN1, 2, 3, 4
Video: 1080/24p, 1080p, 1080i, 720/24p, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
Analogue audio input (minijack) (HDMI IN2 only)
PC Input
Video input (phono jack)
AV2
Digital optical jack (Two channel linear PCM, Dolby Digital)
DIGITAL AUDIO OUT
(OPTICAL)
PC Input (Mini D-sub 15-pin)
PC audio input (minijack)
PC IN
USB port
Headphones jack
i
CAM (Conditional Access Module) slot
10BASE-T/100BASE-TX connector (Depending on the operating environment of the network,
connection speed may differ. 10BASE-T/100BASE-TX communication rate and communication quality
are not guaranteed for this TV.)
LAN
* For LAN connections, use a Category 7 10BASE-T/100BASE-TX cable (not supplied).
Model name KDL-
Power and others
Power requirements
60LX903
40LX903
220 V – 240 V AC, 50 Hz
Approx. 152.5 cm/60 inches
Approx. 101.6 cm/40 inches
100 W
Screen size (measured
diagonally)
1,920 dots (horizontal) × 1,080 lines (vertical)
156 W
Display resolution
Power
in “Home”/
consumption “Standard”
mode
228 W
145 W
in “Shop”/
“Vivid” mode
0.2 W (25 W when “Quick Start” is set to “On”)
228 kWh
0.2 W (20 W when “Quick Start” is set to “On”)
146 kWh
Standby power
consumption*
1
Average annual energy
2
consumption*
Dimensions (Approx.) (w × h × d)
144.0 × 93.8 × 38.0 cm
99.4 × 68.6 × 29.0 cm
99.4 × 65.2 × 6.4 cm
with Table-Top Stand
without Table-Top Stand
Mass (Approx.)
144.0 × 90.6 × 6.4 cm
49.8 kg
23.7 kg
20.3 kg
with Table-Top Stand
without Table-Top Stand
Supplied accessories
42.8 kg
(Continued) 13GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Model name KDL-
60LX903
40LX903
Wall-Mount Bracket: SU-WL500 (KDL-60LX903)
SU-WL700 (KDL-40LX903)
Wall-Hanging Bracket: SU-WH500
3D Glasses: TDG-BR100
Optional accessories
TDG-BR50
1
* Specified standby power is reached after the TV finishes necessary internal processes.
2
* 4 hours a days and 365 days a year
~
• To save power consumption
– when you reduce backlight setting (the brightness of the screen), the power consumption reduce.
– the “Eco” settings (e.g. “Power Saving”, “Idle TV Standby”) help you to reduce the power consumption and
thus save money by reducing electricity bills.
– when you switch off the TV using the ENERGY SAVING SWITCH (only certain models), power
consumption will be almost zero.
Design and specifications are subject to change without notice.
3D Glasses TDG-BR100
77 g (including battery)
CR2032/3V
Weight
Battery Type
Battery Life
Up to 100 hours of battery life
The battery life will vary based on usage patterns, environmental condition (temperature) and the battery
brand(s).
179 × 40 × 183 mm
Dimensions (Approx.)
(w × h × d)
14GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Accessories (Wall-Mount Bracket)
To Customers:
For product protection and safety reasons, Sony strongly recommends that installing of your TV be
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this
product.
Your TV can be installed using the SU-WL500 (KDL-60LX903 only), or SU-WL700 (except KDL-
60LX903) Wall-Mount Bracket (sold separately).
•
Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the
installation.
•
Sufficient expertise is required for installing this product, especially to determine the strength of
the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the
wall to Sony dealers or licensed contractors and pay adequate attention to safety during the
installation. Sony is not liable for any damage or injury caused by mishandling or improper
installation.
SU-WL500 (KDL-60LX903 only)
Mounting Hook
Spacer
Screw (M6 × 20)
~
• When installing the TV on a wall, remove the four screws from the rear of the TV. (They are fastened in the
screw holes for wall mounting.) Be sure to store the removed screws in a safe place, keeping them away from
children.
• Attach the Mounting Hook using the supplied four spacers and four M6 × 20 screws.
• Place the TV on the Table-Top Stand, when securing the Mounting Hook.
• Remove the bottom cover and terminal cover first before detaching the Table-Top Stand. See step 4 (page 18)
for details.
• When attaching the Table-Top Stand again, be sure to fasten the four screws (previously removed) to the
original holes on the rear of the TV.
(Continued) 15GB
Download from Www.Somanuals.com. All Manuals Search And Download.
TV installation dimensions table
Screen centre point
Unit: cm
Length for each mounting angle
Display
Screen centre
dimension
Model Name
dimensions
Angle (0°)
Angle (20°)
KDL-
A
B
C
D
E
F
G
H
144.0
90.6
3.1
50.3
12.1
38.6
85.0
52.1
60LX903
Figures in the above table may differ slightly depending on the installation.
WARNING
The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of
16GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Screw and Hook locations diagram/table
Model Name
Screw location
Hook location
a
KDL-60LX903
e, j
Screw location
Hook location
When installing the Mounting Hook on the
TV.
When installing the TV onto the Base Bracket.
a
b*
c*
* Hook location “b” and “c”
cannot be used for the
models.
(Continued) 17GB
Download from Www.Somanuals.com. All Manuals Search And Download.
SU-WL700 (except KDL-
60LX903)
Installing on a wall
Precautions
Be sure to install the Wall-Mount Bracket securely
to the wall following the instructions in this as well
as the manual provided with the Wall-Mount
Bracket. The numbers given in the parentheses
indicate the installation steps described in the
instruction manual provided with Wall-Mount
Bracket.
~
• Do not attach the bottom cover and terminal
cover.
6 Place the Spacers.
1 Remove the four screws, and be
sure to store them in a safe place,
keeping them away from children.
1 Check the parts supplied with the Wall-
Mount Bracket (1).
Refer to the instruction manual provided
with the Wall-Mount Bracket.
2 Decide on the installation location.
(2-1)
Refer to the following “TV installation
dimensions table”. Allow for suitable
clearance between the TV, the ceiling and
protruding parts of the wall as instructed.
2 Place the four
spacers (supplied).
~
3 Install the Base Bracket on the wall.
(2-2 through 3)
• When attaching the Table-Top Stand again, be
sure to fasten the four screws (previously
removed) to the original holes on the rear of
the TV.
Decide the positions of the screw on the
wall and install the Base Bracket. Refer to
the instruction manual provided with the
Wall-Mount Bracket for details.
7 Attach the Mounting Bracket and the
Lock Bracket. (4-3 through 4-7)
Refer to the instruction manual provided
with the Wall-Mount Bracket.
4 Detach the Table-Top Stand from the
TV, if necessary. (4-1)
• Remove the bottom cover and terminal
cover first before detaching the Table-
Top Stand.
8 Prepare the paper template. (5-2)
1. Refer to the following “TV installation
dimensions table” and mark the TV outline
on the template.
2. Tape the template to the wall as
instructed in the manual provided with the
Wall-Mount Bracket.
Follow the instruction manual provided
with the Wall-Mount Bracket to complete
the installation. (5-3 through 6)
from the TV” (page 7) for details.
5 Connect the supplied AC power cord
(mains lead). (5-1)
18GB
Download from Www.Somanuals.com. All Manuals Search And Download.
TV installation dimensions table
Screen centre point
Unit: cm
Display
dimensions
Screencentre
dimension
Length for each mounting angle
Model Name
KDL-
Angle (0°)
Angle (20°)
A
B
C
D
E
F
G
H
99.4
65.2
8.9
43.4
7.5
33.8
61.0
49.5
40LX903
Figures in the above table may differ slightly depending on the installation.
WARNING
The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of
19GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• It is strongly recommended that you use
a Sony wall-mount bracket in order to
provide adequate air-circulation.
• Do not use the supplied mains lead on
any other equipment.
Safety
Information
• Do not pinch, bend, or twist the mains
lead excessively. The core conductors
may be exposed or broken.
• Do not modify the mains lead.
• Do not put anything heavy on the mains
lead.
• Do not pull on the mains lead itself when
disconnecting the mains lead.
• Do not connect too many appliances to
the same mains socket.
Installed on the wall
30 cm
Installation/Set-up
10 cm
10 cm
Install and use the TV set in accordance
with the instructions below in order to
avoid any risk of fire, electrical shock or
damage and/or injuries.
• Do not use a poor fitting mains socket.
10 cm
Installation
Prohibited Usage
Leave at least this space around
the set.
• The TV set should be installed near an
Do not install/use the TV set in locations,
environments or situations such as those
listed below, or the TV set may
easily accessible mains socket.
• Place the TV set on a stable, level
surface.
• Only qualified service personnel should
carry out wall installations.
• For safety reasons, it is strongly
recommended that you use Sony
accessories, including:
Installed with stand
30 cm
malfunction and cause a fire, electrical
shock, damage and/or injuries.
10 cm
10 cm
6 cm
Location:
Outdoors (in direct sunlight), at the
seashore, on a ship or other vessel, inside a
vehicle, in medical institutions, unstable
locations, near water, rain, moisture or
smoke.
–
Wall-mount bracket
SU-WL500 (KDL-60LX903)
SU-WL700 (KDL-40LX903)
Leave at least this space around
the set.
–
Wall-hanging bracket
SU-WH500
• To ensure proper ventilation and prevent
the collection of dirt or dust:
Environment:
• Be sure to use the screws supplied with
the Wall-mount bracket when attaching
the mounting hooks to the TV set. The
supplied screws are designed so that they
are 8 mm to 12 mm in length when
measured from the attaching surface of
the mounting hook.
The diameter and length of the screws
differ depending on the Wall-mount
bracket model.
Places that are hot, humid, or excessively
dusty; where insects may enter; where it
might be exposed to mechanical vibration,
near flammable objects (candles, etc). The
TV set shall not be exposed to dripping or
splashing and no objects filled with
liquids, such as vases, shall be placed on
the TV.
–
Do not lay the TV set flat, install
upside down, backwards, or
sideways.
Do not place the TV set on a shelf,
rug, bed or in a closet.
Do not cover the TV set with a cloth,
such as curtains, or items such as
newspapers, etc.
–
–
Use of screws other than those supplied
may result in internal damage to the TV
set or cause it to fall, etc.
Situation:
–
Do not install the TV set as shown
below.
Do not use when your hands are wet, with
the cabinet removed, or with attachments
not recommended by the manufacturer.
Disconnect the TV set from mains socket
and aerial during lightning storms.
Air circulation is blocked.
8 mm - 12 mm
Screw (supplied with the
Wall-mount bracket)
Broken pieces:
• Do not throw anything at the TV set. The
screen glass may break by the impact
and cause serious injury.
Mounting Hook
Wall
Wall
Hook attachment on rear
of TV set
• If the surface of the TV set cracks, do
not touch it until you have unplugged the
mains lead. Otherwise electric shock
may result.
Transporting
• Before
transporting the
TV set, disconnect
all cables.
• Two or three
people are needed
to transport a large
TV set.
When not in use
Mains lead
• If you will not be using the TV set for
several days, the TV set should be
disconnected from the mains for
environmental and safety reasons.
Handle the mains lead and socket as
follows in order to avoid any risk of fire,
electrical shock or damage and/or injuries:
• As the TV set is not disconnected from
the mains when the TV set is just turned
off, pull the plug from the mains to
disconnect the TV set completely.
• However, some TV sets may have
features that require the TV set to be left
in standby to work correctly.
–
–
–
–
Use only mains leads supplied by
Sony, not other suppliers.
Insert the plug fully into the mains
socket.
Operate the TV set on a 220-240 V AC
supply only.
When wiring cables, be sure to unplug
the mains lead for your safety and take
care not to catch your feet on the
cables.
• When transporting
the TV set by
hand, hold it as
shown on the
right. Do not put
stress on the LCD
panel and the
frame around the
screen.
For children
• Do not allow children to climb on the
TV set.
• Keep small accessories out of the reach
of children, so that they are not
mistakenly swallowed.
• When lifting or moving the TV set, hold
it firmly from the bottom.
• When transporting the TV set, do not
subject it to jolts or excessive vibration.
• When transporting the TV set for repairs
or when moving, pack it using the
original carton and packing material.
–
Disconnect the mains lead from the
mains socket before working on or
moving the TV set.
–
–
Keep the mains lead away from heat
sources.
If the following problems
occur...
Turn off the TV set and unplug the mains
lead immediately if any of the following
problems occur.
Unplug the mains plug and clean it
regularly. If the plug is covered with
dust and it picks up moisture, its
insulation may deteriorate, which
could result in a fire.
Ventilation
• Never cover the ventilation holes or
insert anything in the cabinet.
• Leave space around the TV set as shown
below.
Notes
20GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Ask your dealer or Sony service centre to
have it checked by qualified service
personnel.
• Ghosting may occur when still pictures
are displayed continuously. It may
disappear after a few moments.
• The screen and cabinet get warm when
this TV set is in use. This is not a
malfunction.
• The LCD screen contains a small
amount of liquid crystal. Some
fluorescent tubes used in this TV set also
contain mercury. Follow your local
ordinances and regulations for disposal.
Disposal of the TV set
Disposal of Old
Electrical &
Electronic
Equipment
(Applicable in
When:
–
–
–
Mains lead is damaged.
Poor fitting of mains socket.
TV set is damaged by being dropped,
hit or having something thrown at it.
the European
–
Any liquid or solid object falls through
openings in the cabinet.
Union and other European
countries with separate
collection systems)
This symbol on the product or on its
packaging indicates that this product shall
not be treated as household waste. Instead
it shall be handed over to the applicable
collection point for the recycling of
electrical and electronic equipment. By
ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the
Handling and cleaning the
screen surface/cabinet of
the TV set
Be sure to unplug the mains lead
connected to the TV set from mains socket
before cleaning.
Warning
To prevent the spread of fire, keep candles
or other open flames away from this
product at all time.
To avoid material degradation or screen
coating degradation, observe the following
precautions.
• To remove dust from the screen surface/
cabinet, wipe gently with a soft cloth. If
dust is persistent, wipe with a soft cloth
slightly moistened with a diluted mild
detergent solution.
• Do not spray water or detergent directly
on the TV set. It may drip to the bottom
of the screen or exterior parts, and may
cause a malfunction.
• Never use any type of abrasive pad,
alkaline/acid cleaner, scouring powder,
or volatile solvent, such as alcohol,
benzene, thinner or insecticide. Using
such materials or maintaining prolonged
contact with rubber or vinyl materials
may result in damage to the screen
surface and cabinet material.
• Periodic vacuuming of the ventilation
openings is recommended to ensure to
proper ventilation.
• When adjusting the angle of the TV set,
move it slowly so as to prevent the TV
set from moving or slipping off from its
table stand.
environment and human health, which
could otherwise be caused by
Precautions
Viewing the TV
• Some people may experience discomfort
(such as eye strain, fatigue, or nausea)
while watching 3D video images or
playing 3D video games. Sony
recommends that all viewers take regular
breaks while watching 3D video images
or playing 3D video games. The length
and frequency of necessary breaks will
vary from person to person. You must
decide what works best. If you
inappropriate waste handling of this
product. The recycling of materials will
help to conserve natural resources. For
more detailed information about recycling
of this product, please contact your local
Civic Office, your household waste
disposal service or the shop where you
purchased the product.
Disposal of
waste batteries
(applicable in the
European Union
and other
experience any discomfort, you should
stop watching the 3D video images or
playing 3D video games until the
discomfort ends; consult a doctor if you
believe necessary. You should also
review (i) the instruction manual of any
other device or media used with this
television and (ii) our website
European
countries with separate
collection systems)
Optional Equipment
This symbol on the battery or on the
packaging indicates that the battery
provided with this product shall not be
treated as household waste. On certain
batteries this symbol might be used in
combination with a chemical symbol. The
chemical symbols for mercury (Hg) or
lead (Pb) are added if the battery contains
more than 0.0005% mercury or 0.004%
lead. By ensuring these batteries are
disposed of correctly, you will help
prevent potentially negative consequences
for the environment and human health
which could otherwise be caused by
inappropriate waste handling of the
battery. The recycling of the materials will
help to conserve natural resources. In case
of products that for safety, performance or
data integrity reasons require a permanent
connection with an incorporated battery,
this battery should be replaced by qualified
service staff only. To ensure that the
battery will be treated properly, hand over
the product at end-of-life to the applicable
collection point for the recycling of
electrical and electronic equipment. For all
other batteries, please view the section on
how to remove the battery from the
product safely. Hand the battery over to
the applicable collection point for the
recycling of waste batteries. For more
detailed information about recycling of
this product or battery, please contact your
local Civic Office, your household waste
disposal service or the shop where you
purchased the product.
myproduct) for the latest information.
The vision of young children (especially
those under six years old) is still under
development. Consult your doctor (such
as a pediatrician or eye doctor) before
allowing young children to watch 3D
video images or play 3D video games.
Adults should supervise young children
to ensure they follow the
• Keep optional components or any
equipment emitting electromagnetic
radiation away from the TV set.
Otherwise picture distortion and/or noisy
sound may occur.
• This equipment has been tested and
found to comply with the limits set out in
the EMC Directive using a connection
signal cable shorter than 3 meters.
recommendations listed above.
• When using the simulated 3D function,
please note that the displayed image is
modified from the original due to the
conversion done by this television.
• View the TV in moderate light, as
viewing the TV in poor light or during
long period of time, strains your eyes.
• When using headphones, adjust the
volume so as to avoid excessive levels,
as hearing damage may result.
Batteries
• Observe the correct polarity when
inserting batteries.
• Do not use different types of batteries
together or mix old and new batteries.
• Dispose of batteries in an
environmentally friendly way. Certain
regions may regulate the disposal of
batteries. Please consult your local
authority.
• Handle the remote with care. Do not
drop or step on it, or spill liquid of any
kind onto it.
• Do not place the remote in a location
near a heat source, a place subject to
direct sunlight, or a damp room.
LCD Screen
• Although the LCD screen is made with
high-precision technology and 99.99%
or more of the pixels are effective, black
dots may appear or bright points of light
(red, blue, or green) may appear
constantly on the LCD screen. This is a
structural property of the LCD screen
and is not a malfunction.
• Do not push or scratch the front filter, or
place objects on top of this TV set. The
image may be uneven or the LCD screen
may be damaged.
• If this TV set is used in a cold place, a
smear may occur in the picture or the
picture may become dark. This does not
indicate a failure. These phenomena
disappear as the temperature rises.
Wireless Function of the
unit
• Do not operate this unit near medical
equipment (pacemaker, etc.), as
malfunction of the medical equipment
may result.
• Although this unit transmits/receives
scrambled signals, be careful of
unauthorised interception. We cannot be
responsible for any trouble as a result.
21GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Keep this Instruction
manual safe you’ll
need it
Television in the UK is going digital, bringing us all more.
Please see overleaf to find out when your area switches to digital.
Digital UK is the independent, non-profit organisation leading the process of digital TV switchover
in the UK. Digital UK provides impartial information on what people need to do to prepare for the
move to digital, and when they need to do it.
How the switchover affects your TV equipment:
Your new TV has a digital tuner built in, which means it is ready to receive the Freeview signal by
simply plugging it into your aerial socket (check if you can get digital TV through your aerial now,
When the TV switchover happens in your area, there are at least two occasions when you will need
to re-tune your TV in order to continue receiving your existing TV channels, and also to pick up new
ones. Digital UK, the body leading the digital TV switchover, will advise you when you need to re-
tune during the switchover.
22GB
Download from Www.Somanuals.com. All Manuals Search And Download.
How to re-tune:
1
2
3
4
5
6
Press "HOME" on the remote
Press G/g to select "Settings"
Press F/f to select "Digital Set-up", then press
Press to select "Digital Auto Tuning"
Press G to select "Yes" then press to start "Digital Auto Tuning"
Follow the on screen instructions.
If you are missing any channels, it may be that they are not available in your area, or that your aerial
needs upgrading.
If you have any questions, please contact Sony on 08705 111 999 or call Digital UK on 0845 6 50 50
†Calls charged at BT rate of 3p per minute daytime and 1p per minute evenings and weekends.
Rates may vary for calls from non-BT lines.
23GB
Download from Www.Somanuals.com. All Manuals Search And Download.
For useful information about Sony products
4-187-903-11(1)
© 2010 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
|