Special Notes
Precautions
Controls and indicators (continued)
●
●
To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing. No objects filled
with liquids, such as vases, shall be placed on the
apparatus.
●
●
Do not place anything on top of the unit.
The AC power plug is used as a disconnect device and
shall always remain readily operable.
Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your lo-
cal SHARP service facility.
■ Remote control
■ General
1
MODEL
1. Remote Control Transmitter
2. On/Stand-by Button
3. Numeric Buttons
●
Keep your equipment at least 10 cm (4”) of free space
along the sides, top and back for proper ventilation.
●
●
●
Hereby, SHARP Electronics declares that this SHARP Hi Fi
Component System XL-HF202PH(S)/XL-HF202PH(BK)/XL-
HF302PH(T)isincompliancewiththeessentialrequirements
and other relevant provisions of Directive 1999/5/EC. The
declaration of conformity may be consulted at:
Do not turn the volume on to full at switch on. Listen to
music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
XL-HF202PH(S)
10 cm (4”)
10 cm (4”)
2
4. Bass/Treble Button
5. X-Bass Button
18
19
20
The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
XL-HF202PH(BK)
10 cm (4”)
6. Tuning Down, Skip Down, Fast Reverse,
Time Down Button
Caution:
●
7. Tuner Preset Up Button, iPod Cursor Up
8. Volume Down Button
9. Folder Button
●
●
●
●
No naked Àame sources, such as lighted candles,
should be placed on the apparatus.
3
XL-HF302PH(T)
This product is classified as a CLASS 1 LASER
21
22
PRODUCT.
WARNINGS
●
Attention should be drawn to the environmental as-
pects of battery disposal.
HI FI COMPONENT SYSTEM
●
This product contains a low power laser device. To
ensure continued safety do not remove any cover or
attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
10. Tuner Preset Down Button,
iPod Cursor Down
When the ON/STAND-BY button is set at STAND-BY
position, mains voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY
position, the unit may be brought into operation by the
timer mode or remote control.
This unit contains no user serviceable parts. Never
remove covers unless qualified to do so. This unit
contains dangerous voltages, always remove mains
plug from the socket before any service operation and
when not in use for a long period.
10 cm (4”)
23
This unit should only be used within the range of 5°C
- 35°C (41°F - 95°F).
4
11. CD Button
24
●
●
Use the unit on a ¿rm, level surface free from vibration.
Place the speakers at least 30 cm (12”) away from any
CRT TV to avoid colour variations across the TV screen.
If the variations persist, move the speakers further away
from the TV. LCD TV is not prone to such variation.
Keep the unit away from direct sunlight, strong mag-
netic ¿elds, excessive dust, humidity and electronic /
electrical equipment (home computers, facsimiles, etc.)
which generate electrical noise.
Do not expose the unit to moisture, to temperatures
higher than 60°C (140°F) or to extremely low tempera-
tures.
If the unit does not work properly, unplug and plug it in
again. Then turn on the unit.
5
12. USB Button
25
The apparatus is designed for use in moderate cli-
mates.
6
13. iPod Button
OPERATION MANUAL
26
14. iPod Display Button
15. Disc/USB Display Button
16. RDS ASPM Button
17. Bluetooth Button
7
8
●
Warning:
27
28
The voltage used must be the same as that speci¿ed on this
unit. Using a higher voltage is dangerous and may result in
a ¿re or other type of accident causing damage.
SHARP will not be held responsible for any damage result-
ing from such usage.
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
●
9
29
10
18. Open/Close Button
19. Memory Button
20. Clear Button
11
12
13
14
15
30
31
32
33
34
35
36
37
21. Clock/Timer Button
22. Sleep Button
●
●
●
●
●
XL-HF202PH(S) Hi Fi Component System consisting of XL-HF202PH(S) (main unit) and CP-HF202H (speaker system).
XL-HF202PH(BK) Hi Fi Component System consisting of XL-HF202PH(BK) (main unit) and CP-HF202H (speaker system).
XL-HF302PH(T) Hi Fi Component System consisting of XL-HF302PH(T) (main unit) and CP-HF302H (speaker system).
■ Volume control
23. Repeat Button
24. Mute Button
The sound level at a given volume setting depends on
speaker ef¿ciency, location and various other factors. It is
advisable to avoid exposure to high volume levels, which
occurs while turning the unit on with the volume control
setting up high, or while continually listening at high vol-
umes. Excessive sound pressure from earphones and
headphones can cause hearing loss.
25. Random Button
26. Tuning Up, Skip Up, Fast Forward,
Time Up Button
●
●
In case of an electrical storm, unplug the unit for safety.
Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
Accessories
The following accessories are included.
16
17
27. Volume Up Button
28. Enter Button
29. Demo/Dimmer Button
30. Audio/Line (INPUT) Button
31. Tuner Button
38
39
32. iPod Play/Pause Button
33. iPod Menu Button
34. CD/USB Play/Pause Button
35. CD/USB Stop Button
36. RDS Display Button
37. RDS PTY Button
iPad, iPhone, iPod, iPod classic, iPod
nano,and iPod touch are trademarks of
Apple Inc.,registered in the U.S. and other
countries. Lightning is
Apple Inc..
Controls and indicators
9
15
10 11121314 16
a
trademark of
Remote control x 1
“AA” size battery
(UM/SUM-3, R6, HP-7 or
similar) x 1
Stand for iPad x 1
NFC tag x 2
1 2 3
4 5
6 7
8
38. Bluetooth Play / Pause Button
39. Bluetooth Pairing Button
1 2
3
6
■ Display
17
18 19 20 21 22
23 24 2526 27 28 29
PAIRING
1. USB Indicator
7
8
2. iPod Indicators
3. CD Indicator
Speaker wires x 2
(for XL-HF202PH(S) /
XL-HF202PH(BK))
Speaker wires x 2
(for XL-HF302PH(T))
FM aerial x 1
Velcro tape
(hook type) x 2
Velcro tape
(loop type) x 3
4. MP3 Indicator
5. WMA Indicator
6. RDM (Random) Indicator
7. MEM (Memory) Indicator
8. Repeat Indicator
9. Play/Pause Indicator
10. Tuning FM/Bluetooth status Indicator
11. FM Stereo Mode Indicator
12. Stereo Station Indicator
13. RDS Indicator
4
5
The illustration printed in this operation manual are for model XL-HF202PH(S).
■ Speaker system
● This audio system supports NFC-enabled device with Android 4.1, Jelly Bean and higher.
● For device with a lower Android version, refer the operation manual of the device for recommended
app (application).
9
10 11
12 13 14 15 16
1. Dome-Tweeter
2. Woofer
3. Bass ReÀex Duct
4. Speaker Terminal
3
1
2
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by SHARP is under license. Other trademarks and trade names are those of their respective owners.
14. PTY Indicator
15. TP Indicator
16. TA Indicator
4
■ Front panel
11. Headphone Socket
17. Muting Indicator
18. X-bass Indicator
19. Title Indicator
The N Mark is a trademark or registered trademark of NFC Forum, Inc. In the United States and in other
countries.
1. Remote sensor
2. Timer indicator
3. Disc Tray
12. Tuner Preset Down, CD/USB,
iPod/iPhone Skip Down Button
13. Tuner Preset Up, CD/USB,
iPod/iPhone Skip Up Button
14. Disc/USB Stop Button
■ Speaker grilles are removable
20. Artist Indicator
Special Note
4. Docking Station for iPod or iPhone
5. Pairing Button
21. Folder Indicator
22. Album Indicator
23. File Indicator
Make sure nothing comes into contact
with the speaker diaphragms when you
remove the speaker grilles.
Supply of this product does not convey a license nor imply any right to distribute content created with this product in
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for
6. Volume Control
24. Track Indicator
15. Disc/USB/iPod/iPhone Play or Pause Button
16. Disc Tray Open/Close Button
7. On/Stand-by Button
8. FUNCTION Button
9. USB Terminal
25. Daily Timer Indicator
26. Once Timer Indicator
27. Disc Indicator
10. Audio In Socket
28. Total Indicator
29. Sleep Indicator
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS andThomson.
13H R MW 1
1
2
3
TINSEA451AWZZ
Bluetooth one touch connection via NFC (continued)
System connections
Remote control
Bluetooth one touch connection via NFC
Notes concerning use:
Unlike other wireless technology, NFC requires no
discovery or pairing.
Simply tap the source device to the NFC tag to instantly
enjoy seamless connectivity between your smart device
and the audio system.
Make sure to unplug the AC power lead before making any connections.
■ Battery installation
■ About NFC technology
■ NFC connection for audio playback
●
Replace the battery if the operating distance is reduced
or if the operation becomes erratic. Purchase an “AA”
size battery (UM/SUM-3, R6, HP-7 or similar).
Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the di-
rection of the unit if this occurs.
Bluetooth operation buttons (remote control only)
To select Line In function:
Notes:
1
2
Open the battery cover.
Press the button to play or pause.
Near Field Communication (NFC) is a set of standards for
devices (smartphones/tablets) to establish radio communi-
cation with each other by touching/tapping them together
or bringing them into close proximity.
Using NFC in this product simplifies the pairing method of
Bluetooth connectivity.
Press FUNCTION button (main unit) or AUDIO/LINE (IN-
PUT) button (remote control) repeatedly until Line in is
displayed.
●
No sound is heard from the subwoofer without a built-
Check that:
Insert the supplied battery according to the terminal
indicated in the battery compartment. When inserting
or removing the battery, push it towards the (–) battery
terminals.
in ampli¿er.
●
●
●
●
●
●
Your device (smartphone / tablet) has an NFC function.
●
Subwoofer Pre-out (audio signal): 200mV / 10k ohms
at 70 Hz.
Press the button to skip up.
Press and hold to fast forward.
NFC function on your device is turned on.
Screen lock function of the device is off.
This unit is not in Eco mode.
■ NFC detection area
3
Close the cover.
Commercially
Press the button to skip down.
Press and hold to fast reverse.
TV
Audio cable
available
●
Keep the remote control away from moisture, heat,
shock and vibrations.
NFC detection area location may vary depending on the
device (smartphone / tablet). Refer operation manual of
the device for detail.
1
Touch your device to the supplied NFC tag.
Right
speaker
FM
aerial
(not supplied)
Subwoofer
● This audio system supports NFC-enabled device with
Android 4.1, Jelly Bean and higher.
To TV audio
output socket.
(Ampli¿er
Built-In)
Notes:
■ Test of the remote control
●
To listen to audio via Bluetooth connectivity without NFC
tag - refer “Pairing with other Bluetooth source devi-
ces” on page 8.
● For device with a lower Android version, refer the
operation manual of the device for recommended app
(application).
To LINE
The remote control can be used within the range shown below:
Remote sensor
To audio input
socket
input
socket
Caution:
●
To disconnect, simply touch your device to the tag again.
●
Remove the battery if the unit will not be used for a
NFC tag
long period of time. This will prevent potential damage
due to battery leakage.
0.2 m - 6 m
(8” - 20’ )
●
●
●
Do not use rechargeable battery (nickel-cadmium bat-
tery, etc.).
Installing the battery incorrectly may cause the unit to
malfunction.
Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, ¿re
or the like.
2
A pop-up window asking whether to proceed with the
Bluetooth connection appears on the device. Select
<YES>.
to
Left
Wall socket
speaker
●
The ‘connected’ message appears when the connec-
(AC 220
- 240 V ~
50/60 Hz)
tion is complete.
Red
3
Playback will start automatically. Otherwise, press play
(on remote control or source device).
●
●
Sound will be heard from the speakers of this unit via
A Bluetooth audio
source device
(smartphone /
tablet).
audio streaming.
General control
Your device and NFC tag must be within 10 meters
from the unit
■ To turn the power on
■ Auto power off function
.
NFC tag
(during Bluetooth stand-by mode)
Press the ON/STAND-BY button to turn the power on or off.
The main unit will enter the stand-by mode (when iPad,
iPod or iPhone is not connected) after 15 minutes of inactiv-
ity during:
Listening to Bluetooth enabled devices
■ Display brightness control
iPod: Not docked.
■ Bluetooth
Press the DEMO/DIMMER button (remote control).
■ NFC tag set up
Audio/Line In: No detection of input signal.
CD: In the stop mode or no disc.
(Display is dim).
Dimmer 1
Dimmer 2
Dimmer off
Bluetooth wireless technology is a short-range radio
technology that enables wireless communication between
various types of digital devices, such as mobile phone or
computer. It operates within a range of about 10 meters (30
feet) without the hassle of having to use cables to connect
these devices.
1
Peel the separator off the velcro tape (loop type) and
stick it on a desired surface.
The NFC tags can be placed anywhere convenient to you.
The velcro tapes supplied will help to secure the tags onto
the desired location.
■ Aerial connection
■ Demonstration mode
USB: In the stop mode or no media.
Bluetooth: In the pause mode on not connected condition.
(Display gets dimmer).
(Display is bright).
Supplied FM aerial:
●
●
The ¿rst time the unit is plugged in, it will enter the
Bluetooth stand-by (demonstration) mode. “Bluetooth
Stby” will be displayed.
To cancel the Bluetooth stand-by (demonstration)
mode, press the DEMO button (remote control) dur-
ing power stand-by mode. The unit will enter the low
power consumption mode.
To return to the Bluetooth stand-by (demonstration)
mode, press the DEMO button again.
During Bluetooth stand-by condition, NFC function is ac-
tivated once your device touch the supplied NFC tag.
If iPod or iPhone is docked, the unit will begin charg-
ing.
“Charge Mode” will be displayed. Demonstration mode
is invalid during charge mode.
Note:
Connect to the FM 75 OHMS socket and position it where
reception is best.
Separator
However, if iPod or iPhone is docked, the unit will begin
charging. “Charge Mode” will be displayed.
Caution :
● Make sure that the NFC tag is placed on a flat and level
surface.
● If you choose not to use the velcro tape, do not place
the NFC tag near metal surface to avoid connection
interference during tagging.
■ Volume auto fade-in
External FM aerial:
Velcro
tape (loop
type)
Use an external FM aerial (75 ohms coaxial cable) for
better reception. Disconnect the supplied FM aerial wire
before use.
This unit supports the following:
Communication System: Bluetooth Specification version
2.1 Bluetooth + Enhanced Data Rate (EDR).
Support Profile :A2DP (Advanced Audio Distribution Profile)
and AVRCP (Audio/Video Remote Control Profile)
Notes when using unit with a mobile phone
● This unit cannot be used to talk over the telephone even
when there is a Bluetooth connection made to a mobile
phone.
● Please refer to the operating manual supplied with the
mobile phone for details on operation of your mobile
phone while transmitting the sound using a Bluetooth
connection.
If you turn off and on the main unit with the volume set to
27 or higher, the volume starts at 16 and fades in to the
last set level.
■ X-Bass control
When the power is ¿rst turned on, the unit is in the extra
bass mode. “X-BASS” indicator appears. To cancel this
mode, press the X-BASS button (remote control).
●
●
●
Note:
Keep the aerial away from the unit or AC power lead to
avoid noise pickup.
■ Volume control
Important:
2
Peel the separator off the velcro tape (hook type) and
stick it to the rear of the NFC tag. Then place the tag
onto the desired location.
● NFC tag has unique ID for each individual set, SHARP
provides 2 identical tags for your convenience.
● SHARP will not be held liable for the damages caused
by rewriting the tags.
Turn the volume knob towards VOLUME +/– (main unit)
or press VOL +/– (remote control) to increase or decrease
the volume.
■ Bass or Treble control
■ Speaker connection
1
2
Press the BASS/TREBLE button to select “Bass” or “Treble”.
Within 5 seconds, press the VOLUME (+ or –) button to ad-
just the bass or treble.
Velcro tape
(hook type)
Separator
Speaker
terminal
■ Muting
Keep all small parts away from children as they may
be accidentally swallowed.
XL-HF202
XL-HF302
■
AC power connection
To mute the volume, press the button (remote control).
Press again to restore the volume.
+ terminal
- terminal
red wire
wire with red insulation tube
........
........
■ Pairing Bluetooth devices
- 5 ↔ - 4
↔ + 4 ↔ + 5
- 5 ↔ - 4
↔ + 4 ↔ + 5
black wire wire with black insulation tube
After all connections have been made correctly, plug the
AC power lead into the wall socket.
■ Direct key power on function
Bluetooth devices need to be initially paired ¿rst before they
can exchange data. Once paired, it is not necessary to pair
them again unless:
● pairing is made with more than 8 devices. Pairing can
only be made one device at a time. This unit can be
paired to a maximum of 8 devices. If subsequent device
is paired, the oldest device paired, will be deleted and
replaced with the new one.
■ Function
Rear view of the
NFC tag
●
●
Use speakers with an impedance of 4 ohms or more,
as lower impedance speakers can damage the unit.
Do not mistake the right and the left channels. The
right speaker is the one on the right side when you
face the unit.
When you press any of the following buttons, the unit turns
on.
● CD, USB, iPod, BLUETOOTH, AUDIO/LINE (INPUT),
TUNER, iPod / , CD/USB / , BLUETOOTH / on the
remote control: Selected function is activated.
Note:
Press the FUNCTION button repeatedly to select desired
function.
Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
CD
FM STEREO
FM MONO
●
●
Do not let the bare speaker
USB
●
/
button on the main unit: The unit turns on and
Bluetooth
wires touch each other.
playback of the last function will start (CD, USB, iPod,
BLUETOOTH, AUDIO IN, LINE IN, TUNER)
Do not allow any objects to fall
Audio In
Line In
iPod
into or to be placed in the bass
● this unit is reset. All pairing information is deleted when
unit is reset.
● pairing information is deleted while re-pairing, etc.
Note:
reÀex ducts.
The backup function will protect the memorised function
mode for a few hours should there be a power failure or
the AC power lead becomes disconnected.
●
Do not stand or sit on the
Incorrect
speakers. You may be injured.
4
5
6
7
Listening on Android™ devices
Listening to Bluetooth enabled devices (continued)
Listening to the iPod, iPhone or iPad
Listening to the iPod, iPhone or iPad (continued)
Indicators:
● If this unit or the source device is turned off before Blue-
Made for:
2
Dock your iPod or iPhone into the unit.
iPhone (bottom)
■ Introduction : Open Accessory
■ Android device playback
Press the ON/STAND-BY button to turn the power on.
Press the USB button (remote control) or FUNCTION
button repeatedly (main unit) to select USB function.
Connect the device (Smartphone/Tablet) to the unit.
“USB Media” will be displayed.
■ Various iPod, iPhone and iPad functions
tooth connection is completed, pairing will not be com-
pleted and the pairing information will not be memo-
rised. Repeat step 1 onwards to start pairing again.
Indicator
Condition
Blinks
Bluetooth status
In waiting or pairing mode
Connected
1
2
●
●
●
●
●
●
●
●
●
●
●
iPhone 5
●
●
●
●
●
●
●
●
●
●
●
●
iPod touch (5th generation)
iPod touch (4th generation)
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod touch (1st generation)
iPod classic
iPod nano (7th generation)
iPod nano (6th generation)
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
Open Accessory support allows external USB hardware
(an Android USB accessory) to interact with an Android-
powered device in a special accessory mode. When an
Android-powered device is in accessory mode, the con-
nected accessory acts as the USB host (powers the bus
and enumerates devices) and the Android-powered device
acts in the USB accessory role. Android USB accessories
are speci¿cally designed to attach to Android-powered
devices and adhere to the Open Accessory Protocol, that
allows them to detectAndroid-powered devices that support
accessory mode.
iPhone 4S
iPhone 4
Function Main unit Remote control
Operation
iPhone
iPhone 3GS
iPhone 3G
iPhone
Dock/USB Dock
USB
Lights up
● To pair with other devices, repeat steps 1 - 5 for each
device. This unit can be paired to a maximum of 8 de-
vices. If subsequent device is paired, the oldest device
paired, will be deleted and replaced with the new one.
3
Lightning connector
Press in the pause
mode.
Play
Unconnected
No indication
iPod
CD/USB
iPad (4th generation)
iPad mini
However, the indication status is not displayed during
Bluetooth stand-by mode.
Press in the
playback mode.
Pause
iPad (3rd generation)
iPad 2
● Once a device is ousted or deleted from the pairing list,
the pairing information for the device is also deleted. To
listen to the sound from the device again, it needs to be
re-paired. Perform steps 1 - 5 to pair the device again.
Press in the
Track
up/
Lightning
connector
iPad
4
Press the play button (on main unit, remote control or
device).
playback or pause
mode. If you press
the button in the
pause mode, press
■
Pairing with other Bluetooth source devices
down
Caution:
Notes:
Update your iPod, iPhone and iPad unit to the latest soft-
ware version before using them. Visit Apple’s homepage to
download the latest version.
1
2
Press the ON/STAND-BY button to turn the power on.
●
If the source device has an extra bass or equalizer
function, set them to off. If these functions are on,
sound may be distorted.
Incoming calls will pause the playback/application.
Once the calls are answered, the conversation can only
be heard through the built-in speaker of the cellular
device. Turn on the device speaker or disconnect the
device to start conversation.
Dock for iPhone
the
/
button to
Press the FUNCTION button (main unit) repeatedly or
BLUETOOTH button (remote control) to select Blue-
tooth function. “Bluetooth” appears on the display.
1
Insert the connector to the device.
■ Listening to the sound
start the desired
track.
Notes:
●
●
Check that:
Press and hold
down in the
Fast
3
4
Press and hold the PAIRING button for 3 seconds or
more. “Start Pairing” appears on the display. The unit
is now in pairing mode and is ready to be paired with
other Bluetooth source device.
●
Charging terminal for iPod, iPhone and iPad:
■ iPod or iPhone playback (Dock)
● The source device Bluetooth functionality is ON.
● Pairing of this unit and the source device is completed.
● Unit is in connected mode.
Device
(Smartphone/Tablet)
forward/
reverse
Condition
USB function
DOCK
USB
playback mode.
Release the
1
2
Press the ON/STAND-BY button to turn the power on.
Press the iPod button on the remote control or FUNCTION
button repeatedly on the main unit to select iPod function.
Insert iPod or iPhone unit into the dock of main unit.
“Dock Ok” will appear.
NO
YES
button to resume
playback.
■
iPod, iPhone or iPad playback (USB terminal)
Connector
Perform pairing procedure on the source device to
detect this unit. “SHARP XL-HF202” will appear in
the detected devices list (if available) in the source
device. (Refer the source device operating manual for
details).
1
2
Press the ON/STAND-BY button to turn the power on.
Other function
(Bluetooth/CD/Tuner/
USB/iPod/Audio/Line in)
YES
NO
3
4
Press the FUNCTION button to select Bluetooth func-
tion.
1
Press the ON/STAND-BY button to turn the power on.
Press the USB button (remote control) or FUNCTION
button repeatedly (main unit) to select USB function.
Connect iPod, iPhone or iPad to the unit. “USB/iPod”
will appear.
Press to display
iPod information.
Display
iPod
■ To disconnect the Android device
2
____
Press the
/
(iPod / ) button to start playback.
Bluetooth Stand-by
YES
NO
3
4
Start the Bluetooth connection from the Bluetooth
1
2
Quit the application (apps).
2
Connect the device to the main unit via USB connector.
stereo audio source device.
3
●
●
1
The message “This accessory is not made to work with
iPhone” or similar, may appear on the iPhone screen when:
- battery is low.
- the iPhone is not properly docked (eg. slanting).
If this occurs, remove and re-dock the iPhone.
The headphone output is switched off during inserting iPod,
iPhone and iPad unit. This is an Apple product speci¿cation.
Notes:
Disconnect the device from the USB terminal.
■ To disconnect iPod, iPhone or iPad
Press the BLUETOOTH / button.
Notes:
● Place the devices to be paired within 1 meter (3
feet) of each other when pairing.
● Some source devices are unable to display lists of
detected devices. To pair this unit with the source
device, refer to the source device operating man-
ual for details.
Press to toggle
repeat mode.
Repeat
Shuffle
Menu
____
____
Simply remove the iPod or iPhone from the docking station
or iPad connector from USB terminal. It is safe to do so
even during playback.
■ Various functions
● For various Bluetooth operations, refer “NFC con-
nection for audio playback” on page 7.
● If the source device has an extra bass function or
equalizer function, set them to off to avoid sound
distortion.
Press to toggle
shufÀe mode.
Function Remote control
Operation
Track number
■
Navigating the iPod, iPhone or iPad menus
Press in the playback or
stop mode.
Track
4
Press the / (CD/USB / ) button to start playback.
Press to view the
iPod menu during
iPod function.
iPod
up/down
■
iPod, iPhone and iPad connection (USB only)
5
6
Select “SHARP XL-HF202” from the source list. If
Passcode* is required, enter “0000”.
____
____
____
Note:
1
2
Press the MENU button to view the menu on iPod, iPhone
or iPad unit. Press it again to go back to previous menu.
Use the PRESET ( or ) button to select an item on
the menu and then press ENTER button.
If you press the button
in the stop mode, press
Notes:
Insert the connector to the iPod, iPhone or iPad.
Stop button ( ) is invalid during iPod, iPhone or iPad play-
back.
*
Passcode may be called PIN Code, Passkey, PIN
● Make the Bluetooth connection again if the source device
is not turned on, or its Bluetooth functionality is off or is in
sleep mode.
USB connector
(not supplied)
the
/
button to start the
number or Password.
Press to con¿rm the
selection.
Enter
desired track.
Note for iPhone playback:
“Pair Complete” and then “Connected” appears on the
display once the unit is successfully paired with the
source device. (Pairing information is now memorised
in the unit.) Some audio source devices may connect
with the unit automatically after pairing is completed,
otherwise follow the instructions in the source device
operating manual to start connection.
iPad
Press and hold down in
the playback mode.
Release the button to
resume playback.
Fast
●
Sound will only switch from iPhone to the main unit
after authentication process is completed in approxi-
mately 10 seconds.
Note:
forward/
reverse
When navigating the iPod, iPhone or iPad menu with re-
mote control, do not operate any of the buttons on the iPod
or iPhone unit. The volume level is adjusted by pressing
the VOL (+ or –) button on the main unit or the remote
control. Adjusting the volume on the iPod, iPhone or iPad
units give no effect.
Press to select the
iPod menu.
Cursor
Up/
■ To disconnect the Bluetooth device
●
●
Incoming calls will pause the playback.
Connector
Perform any of the followings.
Down
Once the calls are answered, the conversation can
only be heard through the built-in iPhone speaker.
Turn on the iPhone speaker or undock the iPhone to
start conversation.
– Disconnect the Bluetooth connection on the audio source
device. Refer the operating manual supplied with the
device.
– Turn off the Bluetooth stereo audio source device.
– Turn off this unit.
Notes:
● If non-compatible device is detected, “Dev No Support”
will be displayed.
7
Press the play button on main unit, remote control or
source device to start Bluetooth connection.
2
3
Place the iPad to the stand for iPad.
iPad
● Controls (play/pause/skip up/skip down) will function
based on actual Applications (Apps) controls used on
Android devices.
iPod, iPhone and iPad operations:
The operations described below depend on the generation
iPod, iPhone and iPad you are using.
■ iPod and iPhone connection (Dock only)
Notes:
Note:
Caution:
● If a device such as microwave oven, wireless LAN card,
Bluetooth device or any other device that uses the
same 2.4 GHz frequency near the system some sound
interruption may be heard.
System on operation:
When the main unit is powered on, the iPod, iPhone or
iPad units will automatically power on when docked or
connected to the unit.
The volume of this unit may not be controlled as intended
depending on the device.
Android is a trademark of Google Inc.
Unplug all accessories from the iPod or iPhone before
inserting it into the dock.
Note:
Stand for iPad
System off (stand-by operation):
When the main unit is turned to stand-by mode, the docked
iPod, iPhone or connected iPad unit will automatically turn
to stand-by mode.
Docking station is for iPod touch (5th generation), iPod
nano (7th generation) and iPhone 5 connection only. Other
Apple products (iPod, iPhone and iPad) can be connected
via USB terminal.
● The transmission distance of the wireless signal be-
tween the device and the main unit is about 10 m (32 ‘),
but may vary depending on your operating environment.
If a steel concrete or metallic wall is between the device
and the main unit, the system may not operate at all,
because the wireless signal cannot penetrate metal.
■ Auto power on
During Bluetooth Stand-by mode, when music is played from
your device, the unit will automatically power on when the
Bluetooth connection has been set up between the main unit
and your device and they remain connected.
Connect the iPod, iPhone or iPad to the unit via USB
connector.
1
Open the docking station for iPod and iPhone by
pulling up the cover.
Note:
This function is not applicable during Demonstration mode
off.
USB
Note:
USB terminal does not support VIDEO out.
8
9
10
11
Listening to a CD or MP3/WMA disc
Listening to a CD or MP3/WMA disc (continued)
Listening to USB mass storage device/MP3 player
Listening to the radio
To cancel the programmed play mode:
Notes:
4
5
Within 30 seconds, press the MEMORY button to store
that station in memory. If the “MEM” and preset number
indicators disappear before the station is memorised,
repeat the operation from step 2.
Repeat steps 1 - 4 to set other stations, or to change
a preset station. When a new station is stored in the
memory, the station previously memorised for that
preset channel number will be erased.
■ Various disc functions
■ Repeat play
During programmed stop mode, press the (CD ) but-
ton. The display will show “Memory Clear” and all the pro-
grammed contents will be cleared.
●
SHARP will not be held liable for the loss of data while the
USB memory device is connected to the audio system.
Files compressed in MP3 and/or WMA format can be
played back when connected to the USB terminal.
This USB memory’s format supports FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory de-
vices will work on this audio system.
Repeat play can play one track, all tracks or a programmed se-
quence continuously.
To repeat one track:
Select desired track using the Numeric buttons.
Press the REPEAT button repeatedly until “Repeat One” appears.
Function Main
unit
Remote
control
Operation
●
Adding tracks to the programme:
Press in the stop mode.
Play
●
●
If a programme has been previously stored, the “MEM”
indicator will be displayed. Press the MEMORY button.
Then follow steps 2 - 3 to add tracks.
Press in the playback
mode. Press the
Pause
Press the
/
(CD/USB / ) button.
Note:
/
button to resume
To repeat all tracks:
Press the REPEAT button repeatedly until “Repeat All” appears.
●
USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of
the USB cable will affect the performance of this au-
dio system. iPod, iPhone and iPad is not prone to this
condition.
playback from the
paused point.
The backup function protects the memorised stations for a
few hours should there be a power failure or the AC power
lead become disconnected.
Notes:
Press the
/
(CD/USB / ) button.
●
When the disc compartment is opened, the programme
is automatically cancelled.
To repeat desired tracks:
Press in the playback
mode.
Stop
Perform steps 1 - 5 in “Programmed play” section on this page
and then press the REPEAT button repeatedly until “Repeat All”
appears.
●
If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to an-
other, the programmed selections will be cleared.
During the programme operation, random play is not
possible.
■ To recall a memorised station
●
●
This USB memory cannot be operated via USB hub.
The USB terminal in this unit is not intended for a PC
connection.
Press in the playback or
stop mode.
Track
Press and hold the PRESET ( or ) button to select the
desired station.
up/down
To repeat one folder:
●
If you press the button
in the stop mode, press
While in Folder mode on (MP3/WMA), press REPEAT button
●
●
●
External HDD-storage cannot be played back via USB
terminal.
If the data inside the USB memory is large, it may take
longer time for the data to be read.
This product can play WMA and MP3 ¿les. It will au-
tomatically detect the ¿le type being played. If unplay-
able ¿le is played on this product, “Not Support” is in-
dicated and the ¿le will be automatically skipped. This
will take a few seconds. If abnormal indications appear
on the display due to the unspeci¿ed ¿le, turn off the
unit and then turn it on again.
repeatedly until “Repeat Folder” appears. Press the
USB / ) button.
/
(CD/
■ To scan the preset stations
the
/
button to start
the desired track.
■ Procedure to playback MP3/WMA disc
To cancel repeat play:
1
2
Press and hold the PRESET ( or ). button until the
preset number Àashes. The programmed stations will
be tuned in sequentially, for 5 seconds each.
Press the PRESET ( or ) bbutton again when the
desired station is located.
Press and hold down in
the playback mode.
Release the button to
resume playback.
Press the REPEAT button repeatedly until “Normal” appears and
” disappears.
Fast
with folder mode on
forward/
reverse
“
■ Tuning
To play back CD-R/RW.
1
Press the CD button on the remote control, and load
an MP3/WMA disc. Press the FOLDER button and
disc info will be displayed.
1
2
Press the ON/STAND-BY button to turn the power on.
■ Disc playback
Press the TUNER button (remote control) or
FUNCTION button (main unit) repeatedly to select FM
Stereo or FM Mono.
● Manual tuning:
Press the TUNING ( or ) button repeatedly to tune
in to the desired station.
Note:
■ To erase entire preset memory
1
2
Press the ON/STAND-BY button to turn the power on.
Press the CD button on the remote control or FUNCTION
button repeatedly on the main unit to select CD function.
■ Direct track search
MP3 indicator
This product is not compatible with MTP and AAC ¿le sys-
tems from USB mass storage device or MP3 player.
1
2
Press the ON/STAND-BY button to turn the power on.
Press the FUNCTION button (main unit) repeatedly
or TUNER button (remote control) to select Tuner
function.
In Tuner function, press and hold the CLEAR button
(remote control) until “Tuner Clear” appears.
WMA indicator
TOTAL indicator
Use the Numeric buttons (remote control) to select the
desired track while playing the selected disc.
3
Caution:
●
●
This product relates to USB mass storage devices
and MP3 players. It may however face some irregu-
larities due to various unforeseen reasons from some
devices. Should this happen, turn off the unit and then
turn it on again.
3
Press the OPEN/CLOSE button to open the disc compart-
ment.
After performing repeat play, be sure to press the (CD/
USB ) button. Otherwise, the disc will play continuously.
●
●
The Numeric buttons allow you to select up to number 9.
When selecting number 10 or higher, use the “10+” button.
■ To play back USB/MP3 player with folder
mode on / off
● Auto tuning:
4
5
6
Place the disc in the disc compartment, label side front.
Press the OPEN/CLOSE button to close the disc tray.
Press the / (CD/USB / ) button to start playback.
3
A. For example, to choose 13
Press and hold the TUNING ( or ) button. Scanning will
start automatically and the tuner will stop at the ¿rst receiv-
able broadcast station.
■ Programmed play (CD)
Total number of folder Total number of ¿les
1
Press the USB button (remote control) or FUNCTION
button (main unit) repeatedly to select USB function.
Connect the USB memory device that has MP3/WMA
format ¿les on the unit. When the USB memory is con-
nected to the main unit, the device information will be
displayed.
1
2
3
Press the “10+” button once.
Press the “1” button.
2
Press the PRESET ( or ) button to select desired
playback folder. (Folder mode on)
During CD function, MP3 player will not be charging.
1
2
While in the stop mode, press the MEMORY button on the
remote control to enter the programming save mode.
Press the “3” button.
To stop playback:
Press the (CD/USB ) button.
Caution:
Selected track number
Notes:
The following functions are the same as CD operations:
Page
Direct track search...................................................... 12
Repeat play .................................................................. 13
Random play................................................................ 12
Programmed play (MP3/WMA) ................................... 13
●
Press the
or
button to select the desired track.
FOLDER
indicator
●
When radio interference occurs, auto scan tuning may
stop automatically at that point.
B. For example, to choose 130
1
2
3
4
Press the “10+” button twice.
Press the “1” button.
To playback with folder mode on, follow step 2 below.
To playback with folder mode off, skip to step 3 below.
●
●
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING ( or
button again.
When an RDS (Radio Data System) station is tuned in,
the frequency will be displayed ¿rst, and then the RDS in-
dicator will light up. Finally, the station name will appear.
Full auto tuning can be achieved for RDS stations
“ASPM”, see page 16.
●
Do not place two discs in one-disc-tray.
)
●
Do not play discs of special shapes (heart, octagon,
etc). It may cause malfunctions.
Press the “3” button.
Press the “0” button.
Using the Radio Data System (RDS)
2
Press the FOLDER button, and press the PRESET ( or
) button to select desired playback folder. To start play-
back, go to step 4. To change the playback folder, press
the PRESET ( or ) button to select another folder.
Selected track number
Press the MEMORY button to save the track number.
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be
programmed. If you want to check the programmed tracks,
press the MEMORY button repeatedly. To clear the pro-
grammed tracks, press the CLEAR button.
FOLDER number First track number in
the folder
●
●
3
4
●
●
●
Do not push the disc tray while it is moving.
If the power fails wait until the power is restored.
If TV or radio interference occurs during CD operation,
move the unit away from the TV or radio.
Be sure to place 8 cm (3”) disc in the middle of the
disc tray.
Due to the structure of the disc information, it takes
longer to read an MP3/WMA disc than a normal CD
(approximately 20 to 90 seconds).
RDS is
a
broadcasting service which
a
growing
Notes:
3
4
Select desired ¿le to be played back by pressing the
Note:
number of FM stations provide. These FM stations
send additional signals along with their regular pro-
gramme signals. They send their station names, and
information about the type of programme such as
sport, music, etc.
●
A track number higher than the number of tracks on
the disc cannot be selected.
During random play, direct search is not possible.
or
button.
(CD/USB / ) button. Playback will start
3
4
Select desired ¿le to be played back by pressing the
If USB memory device is not connected, “USB No Media”
will be shown on the display.
Press the
/
or
button.
(CD/USB / ) button. Playback will start
●
●
●
and ¿le name will be displayed.
Press the
and the ¿le name will be displayed.
/
5
Press the / (CD/USB / ) button to start playback.
To receive an FM stereo transmission:
Notes:
●
Title, Artist and Album name are displayed if they
are recorded on the disc.
●
Press the TUNER button to select stereo mode. “ST”
indicator will be displayed. “ ” and “ ” will appear
when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER button
to extinguish the “ST” indicator. The reception changes
to monaural, and the sound becomes clearer.
■ Random play
●
●
●
This unit only supports “MPEG-1 Audio Layer-3” for-
mat. (Sampling Frequency is 32, 44.1, 48kHz)
Playback order for MP3 ¿les may differ depending on
the writing software used during ¿le download.
Bitrate which is supported by MP3 is 32~320 kbps,
WMA is 64~160 kbps.
●
Title, Artist and Album name are displayed if they
are recorded in the USB memory device.
Display content can be changed by pressing the
CD/USB DISPLAY button.
When tuned to an RDS station, “RDS” and the station
name will be displayed.
“TP” (Traf¿c Programme) will appear on the display when
the received broadcast carries traf¿c information, and “TA”
(Traf¿c Announcement) will appear whilst a traf¿c informa-
tion is on air.“
■ Programmed play (MP3/WMA)
●
In case of playback with the folder mode on, press
the PRESET ( or ) button, and the folder can
be selected even though it is in playback/pause
mode. It will continue playback/pause mode in the
1st track of the selected folder.
To random play all tracks:
Press RANDOM button on the remote control until “Random”
1
2
While in the stop mode, press the MEMORY button to
enter the programming save mode.
Press the PRESET ( or ) button on the remote con-
trol to select the desired folder.
●
●
Note for CD or MP3/WMA disc:
appears. Press the
/
(CD/USB / ) button.
●
Rewritable multi-session discs with un¿nished writing,
To cancel random play:
Press the RANDOM button again. “RDM” indicator will dis-
appear.
Note:
To pause playback:
Press the (CD/USB / ) button.
can still be played.
●
●
●
Files without MP3/WMA format cannot be played back.
Playlists are not supported on this unit.
This unit can display Folder Name or File Name up to
32 characters.
■ Memorising a station
“PTYI” (Dynamic PTY Indicator) will appear whilst the Dy-
namic PTY station is received.
●
Display content can be changed by pressing the
CD/USB DISPLAY button.
/
You can store 40 FM stations in memory and recall them
at the push of a button. (Preset tuning)
■ To remove USB memory device
File name display
Folder display
Then press the
lect the desired tracks.
or
button (remote control) to se-
●
Total number of folders read is 999 including folder
with non-playable ¿le. However, the display shows
only folder with MP3/WMA ¿les.
1
2
Perform steps 2 - 3 in “Tuning”.
Press the MEMORY button.
1
2
Press the (CD/USB ) button to stop playback.
Disconnect USB memory device from the USB terminal.
Counter display
Album display
Title display
Artist display
Notes:
●
●
The display playback time may not be displayed cor-
rectly when playing back a variable bitrate ¿le.
WMA meta tag also supports title, artist and album
name which are recorded in WMA ¿les. Copyright pro-
tected WMA ¿les cannot be played back.
●
If you press the
button during random play, you
button does not allow you
can move to the track selected next by the random
3
4
5
Press the MEMORY button to save the folder and track
number.
Repeat steps 2 – 3 for other folder/tracks. Up to 32
tracks can be programmed.
operation. However, the
Note:
to move to the previous track. The beginning of the
track being played will be located.
3
Within 30 seconds, press the PRESET ( or ) button
to select the preset channel number. Store the stations
in memory, in order, starting with preset channel 1.
If “Not Support” is displayed, it means “Copyright protected
WMA ¿le” or “Not supported playback ¿le” is selected.
●
In random play, the unit will select and play tracks auto-
matically. (You cannot select the order of the tracks.)
Press the
/
(CD/USB / ) button to start playback.
12
13
14
15
XL-HF202-302_OM_SUK_EN_A1.indd
1
Download from Www.Somanuals.com. All Manuals Search And Download.
2013-08-06 08:56:22
|