Sony Computer Monitor CPD E240 User Manual

11  
â
Trinitron Color  
Computer Display  
US  
FR  
ES  
CPD-E240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
â
â
Trinitron and FD Trinitron are registered trademarks of Sony  
Corporation.  
Table of Contents  
Macintosh is a trademark licensed to Apple Computer, Inc., registered in  
the U.S.A. and other countries.  
Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Technical Features. . . . . . . . . . . . . . . . . . . . . . . . 6  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i  
â
Windows and MS-DOS are registered trademarks of Microsoft  
Corporation in the United States and other countries.  
IBM PC/AT and VGA are registered trademarks of IBM Corporation of  
the U.S.A.  
ä
VESA and DDC are trademarks of the Video Electronics Standard  
Association.  
ENERGY STAR is a U.S. registered mark.  
All other product names mentioned herein may be the trademarks or  
registered trademarks of their respective companies.  
Furthermore, “ä” and “â” are not mentioned in each case in this manual.  
Precautions  
Notes on cleaning the screen’s surface  
Warning on power connections  
• The screen’s surface is covered with a thin anti-reflective coating  
to enhance the ergonomic characteristics of the monitor. To ensure  
that the coating is not damaged, use a soft cloth to clean the  
screen’s surface. If necessary, use a soft cloth lightly moistened  
with a mild detergent solution, such as hand soap, to wipe the  
screen.  
• Use the supplied power cord. If you use a different power cord,  
be sure that it is compatible with your local power supply.  
For the customers in the U.S.A.  
If you do not use the appropriate cord, this monitor will not  
conform to mandatory FCC standards.  
• Do not use any type of abrasive pad, alkaline cleanser, scouring  
powder, or solvents such as alcohol or benzene as they might  
damage the anti-reflective coating.  
US  
If you use a glass cleaning liquid, do not use any type of cleaner  
containing an anti-static solution or similar additive as this may  
scratch the screen’s coating.  
• Do not rub, touch, or tap the surface of the screen with sharp or  
abrasive items such as a ballpoint pen or screwdriver. This type of  
contact may result in a scratched picture tube.  
• Before disconnecting the power cord, wait at least 30 seconds  
after turning off the power to allow the static electricity on the  
screen’s surface to discharge.  
• After the power is turned on, the screen is demagnetized  
(degaussed) for about 5 seconds. This generates a strong  
magnetic field around the screen which may affect data stored on  
magnetic tapes and disks placed near the monitor. Be sure to keep  
magnetic recording equipment, tapes, and disks away from the  
monitor.  
Notes on cleaning the cabinet  
• Clean the cabinet, panel and controls with a soft cloth lightly  
moistened with a mild detergent solution.  
• Do not use any type of abrasive pad, scouring powder or solvent,  
such as alcohol or benzene.  
Transportation  
When you transport this monitor for repair or shipment, use the  
original carton and packing materials.  
Display Stand  
Do not remove this monitor’s stand.  
The equipment should be installed near an easily accessible  
outlet.  
Use of the tilt-swivel  
Installation  
This monitor can be adjusted within the  
angle shown in the picture to the right.  
To turn the monitor vertically, hold it at  
the bottom with both hands. Be careful  
not to pinch your fingers at the back of  
the monitor when you tilt the monitor up  
vertically.  
Do not install the monitor in the following places:  
• on surfaces (rugs, blankets, etc.) or near materials (curtains,  
draperies, etc.) that may block the ventilation holes  
• near heat sources such as radiators or air ducts, or in a place  
subject to direct sunlight  
• in a place subject to severe temperature changes  
• in a place subject to mechanical vibration or shock  
• on an unstable surface  
• near equipment which generates magnetism, such as a  
transformer or high voltage power lines  
• near or on an electrically charged metal surface  
• in a dusty or smoky environment  
Protection  
• Do not put foreign objects into the  
monitor.  
• Disconnect the monitor if environment exceeds 60°C/140°F.  
• Ensure AC power cord is not trapped under furniture, TV, etc.  
• Do not overload wall outlets, extension cords, or convenience  
receptacles beyond their capacity.  
• inside an enclosed rack  
• Never spill liquid of any kind on the monitor.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mb  
b
m
m
m
m
m
m
M
m
On-Screen menu adjustments  
Main menu icons and adjustment Sub menu icons and adjustment items  
items  
Horizontal position  
Horizontal size  
Adjusting the size or centering of  
Vertical position  
1
the picture*  
Vertical size  
Enlarge/reduce  
2
Rotating the picture*  
1
Expanding or contracting the picture sides*  
1
Adjusting the shape of the picture  
Shifting the picture sides to the left or right*  
1
Adjusting the picture width at the top of the screen*  
Shifting the picture to the left or right at the top of the screen*  
1
2
Adjusting the color of the picture  
*
See : To adjust the color of the picture.  
Horizontally shifts red or blue shadows  
Vertically shifts red or blue shadows  
2
Adjusting the convergence*  
3
Selecting language  
Additional settings  
Selecting the on-screen menu language*  
DEGAUSS: demagnetizes the monitor.  
4
MOIRE ADJUST: minimizes moire*  
See To reset the adjustment.  
0
5
Protecting adjustment data (CONTROL LOCK)*  
1
2
* This adjustment is effective for the current input signal.  
* This adjustment is effective for all input signals.  
* Language Menu  
US  
3
: To adjust the color of the picture  
The COLOR settings allow you to adjust the pictures color  
temperature by changing the color level of the white color field.  
Colors appear reddish if the temperature is low, and bluish if the  
temperature is high. This adjustment is useful for matching the  
monitors color to a printed pictures colors.  
x Adjustment items  
You can select the preset color temperature from 5000K or 9300K.  
The default setting is 9300K.  
If necessary, you can make additional fine adjustments to the color  
by selecting  
.
0: To reset the adjustment  
The RESET option erases your customized settings. To restore  
your monitor to the factory settings, refer to the following steps.  
x Resetting the adjustment for current input signal  
Move the joystick ,.  
x Resetting the adjustment for all input signals  
Hold the joystick , for 2 seconds.  
Note  
When reset the adjustment for all input signalis activated, the customized  
language selection goes back to the default language of English.  
Technical Features  
Troubleshooting  
x No picture  
If the 1 (power) indicator is not lit  
Check that the power cord is properly connected.  
Check that the 1 (power) switch is in the onposition.  
Preset and user modes  
When the monitor receives an input signal, it automatically matches the  
signal to one of the factory preset modes stored in the monitors memory to  
provide a high quality picture (see Preset mode timing tableon page i).  
For input signals that do not match one of the factory preset modes, the  
digital Multiscan technology of this monitor ensures that a clear picture  
appears on the screen for any timing in the monitors frequency range  
( horizontal: 30 70 kHz, vertical: 48 120 Hz). If the picture is adjusted,  
the adjustment data is stored as a user mode and automatically recalled  
whenever the same input signal is received.  
The 1 (power) indicator is orange  
Check that the video signal cable is properly connected and all plugs  
are firmly seated in their sockets.  
Check that the HD15 video input connectors pins are not bent or  
pushed in.  
Check that the computers power is on.  
The computer is in power saving mode. Try pressing any key on the  
computer keyboard or moving the mouse.  
Check that the graphic board is completely seated in the proper bus  
slot.  
Power saving function  
This monitor meets the power-saving guidelines set by VESA, ENERGY  
STAR, and NUTEK. If no signal is received by the monitor from your  
computer, the monitor will automatically reduce power consumption as  
shown below.  
If the 1 (power) indicator is green or flashing orange  
Use the Self-diagnosis function.  
x Picture flickers, bounces, oscillates, or is scrambled  
Isolate and eliminate any potential sources of electric or magnetic  
fields such as other monitors, laser printers, electric fans, fluorescent  
lighting, or televisions.  
Move the monitor away from power lines or place a magnetic shield  
near the monitor.  
Try plugging the monitor into a different AC outlet, preferably on a  
different circuit.  
Try turning the monitor 90° to the left or right.  
Check your graphics board manual for the proper monitor setting.  
Confirm that the graphics mode and the frequency of the input signal  
are supported by this monitor (see Preset mode timing tableon  
page i). Even if the frequency is within the proper range, some  
graphics board may have a sync pulse that is too narrow for the  
monitor to sync correctly.  
Power mode  
Power consumption  
1 (power)  
indicator  
normal operation 100 W  
green  
orange  
off  
active off*  
power off  
3 W  
0 W (Approx.)  
*
When your computer is in active off mode, MONITOR IS IN POWER  
SAVE MODE appears on the screen if you press any button on the  
monitor. After a few seconds, the monitor enters the power saving  
mode again.  
Adjust the computers refresh rate (vertical frequency) to obtain the  
best possible picture.  
x Picture is fuzzy  
This monitor has a high luminance mode, so small characters may  
not appear clearly if the monitor receives signals over 1280 × 1024  
resolution. If this occurs, lower the contrast or set the computer to a  
lower resolution.  
Adjust the brightness and contrast.  
Degauss the monitor.*  
Adjust for minimum moire.  
x Picture is ghosting  
Eliminate the use of video cable extensions and/or video switch  
boxes.  
Check that all plugs are firmly seated in their sockets.  
x Picture is not centered or sized properly  
Adjust the size or centering. Note that with some input signals and/or  
graphics board the periphery of the screen is not fully utilized.  
Just after turning on the power switch, the size/center may take a  
while to adjust properly.  
x Edges of the image are curved  
Adjust the geometry.  
x Wavy or elliptical pattern (moire) is visible  
Adjust for minimum moire.  
Change your desktop pattern.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
x Color is not uniform  
On-screen messages  
Degauss the monitor.* If you place equipment that generates a  
magnetic field, such as a speaker, near the monitor, or if you change  
the direction the monitor faces, color may lose uniformity.  
x White does not look white  
Adjust the color temperature.  
x Monitor buttons do not operate (  
screen)  
If the control lock is set to ON, set it to OFF.  
appears on the  
1 If OUT OF SCAN RANGEappears:  
This indicates that the input signal is not supported by the monitors  
specifications. Refer to the following remedy:  
Check that the video frequency range is within that specified for  
the monitor. If you replaced an old monitor with this monitor,  
reconnect the old monitor and adjust the frequency range to the  
following:  
x Letters and lines show red or blue shadows at the  
edges  
Adjust the convergence.  
Horizontal: 30 70 kHz; Vertical: 48 120 Hz  
x A hum is heard right after the power is turned on  
This is the sound of the auto-degauss cycle. When the power is  
turned on, the monitor is automatically degaussed for five seconds.  
* If a second degauss cycle is needed, allow a minimum interval of  
20 minutes for the best result. A humming noise may be heard, but this is  
not a malfunction.  
1 If NO INPUT SIGNALappears:  
This indicates that no input signal is present. Refer to the following  
remedies.  
Check that the video signal cable is properly connected and all  
plugs are firmly seated in their sockets.  
Check that the HD15 video input connectors pins are not bent or  
pushed in.  
Check that the computers power is on.”  
Check that the graphic board is completely seated in the proper  
bus slot.  
1 If MONITOR IS IN POWER SAVE MODE”  
appears:  
US  
This indicates that the computer is in power saving mode. This  
message is displayed only when your computer is in a power saving  
mode and you press any one of the buttons on the monitor. Refer to  
the following remedies.  
Try pressing any key on the computer keyboard or moving the  
mouse.  
Check that the computers power is on.”  
Check that the graphic board is completely seated in the proper  
bus slot.  
To display this monitors name, serial number, and  
date of manufacture.  
While the monitor is receiving a video signal, press and hold the  
center of the MENU / OK button for more than five seconds to  
display this monitors information box.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If thin lines appear on the screen  
Specifications  
(damper wires)  
These lines do not indicate a malfunction; they are a normal  
effect of the Trinitron picture tube with this monitor. These are  
shadows from the damper wires used to stabilize the aperture  
grille. The aperture grille is the essential element that makes a  
Trinitron picture tube unique by allowing more light to reach the  
screen, resulting in a brighter, more detailed picture.  
CRT  
0.24 mm aperture grille pitch (center)  
17 inches measured diagonally  
90-degree deflection  
FD Trinitron  
Viewable image size  
Approx. 328 × 242 mm (w/h)  
(13 × 9 5/8 inches)  
Viewing image  
Resolution  
408 mm (16.1 inches)  
Maximum  
Horizontal: 1280 dots  
Vertical: 1024 lines  
Recommended  
Standard image area  
Deflection frequency*  
Horizontal: 1024 dots  
Vertical: 768 lines  
Approx. 312 × 234 mm (w/h)  
(12 3/8 × 9 1/4 inches)  
Horizontal: 30 to 70 kHz  
Vertical: 48 to 120 Hz  
Self-diagnosis function  
This monitor is equipped with a self-diagnosis function. If there is  
a problem with your monitor or computer, the screen will go  
blank and the 1 (power) indicator will either light up green or  
flash orange. If the 1 (power) indicator is lit in orange, the  
computer is in power saving mode. Try pressing any key on the  
keyboard or moving the mouse.  
AC input voltage/current 100 240 V, 50 60 Hz,  
Max. 1.7 A 0.9 A  
100 W  
10 ºC to 40 ºC  
Power consumption  
Operating temperature  
Dimensions  
x If the 1 (power) indicator is green  
Approx. 402 × 418 × 421 mm (w/h/d)  
(15 7/8 × 16 1/2 × 16 5/8 inches)  
1 Disconnect the video input cable or turn off the  
connected computer.  
Mass (Monitor weight)  
Plug and Play  
Approx. 19 kg (41.9 lb)  
DDC2B/DDC2Bi,  
GTF**  
2 Press the 1 (power) button twice to turn the monitor  
off and then on.  
Supplied accessories  
Power cord (1)  
Warranty card (1)  
This instruction manual (1)  
3 Move the joystick , for 2 seconds.  
If all 4 color bars appear (white, red, green, blue), the monitor is  
working properly. Reconnect the video input cables. Adjust the  
brightness and contrast, and check the monitor. If the fault still  
exists, check your computer.  
If the color bars do not appear, there is a potential monitor failure.  
Inform your authorized Sony dealer of the monitors condition.  
* Recommended horizontal and vertical timing condition  
Horizontal sync width should be more than 1.0 µsec.  
Horizontal blanking width should be more than 3.0 µsec.  
Vertical blanking width should be more than 500 µsec.  
** If the input signal is Generalized Timing Formula (GTF)  
compliant, the GTF feature of the monitor will automatically  
provide an optimal image for the screen.  
x If the 1 (power) indicator is flashing orange  
Turn the monitor OFF and then ON.  
Design and specifications are subject to change without notice.  
If the 1 (power) indicator lights up green, the monitor is working  
properly.  
If the 1 (power) indicator is still flashing, there is a potential  
monitor failure. Count the number of seconds between orange  
flashes of the 1 (power) indicator and inform your authorized  
Sony dealer of the monitors condition. Be sure to note the model  
name and serial number of your monitor. Also note the make and  
model of your computer and graphics board.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
â
â
â
ä
i
Table de synchronisation du mode présélectionné . . . i  
ä
â
Pour les clients aux Etats-Unis  
Exemple de types de fiches  
pour 200 à 240 V CA  
pour 100 à 120 V CA  
N’installez pas le moniteur dans les endroits suivantes :  
15°  
5°  
90°  
90°  
ligne de centrage  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Menu principal  
SORTIR  
MENU  
TAILLE/CENTRE  
GEOMETRIE  
COULEUR  
CONVERGENCE  
LANGUAGE  
OPTION  
,
Câble de signal vidéo  
du moniteur  
vers le HD15 de  
lordinateur raccordé  
fréquences  
horizontale et  
verticale du  
signaldentrée  
en cours  
résolution du signal dentrée en  
cours (uniquement si le signal  
correspond à lun des modes  
de synchronisation VESA  
recommandés).  
68,7kHZ/ 85Hz  
1024 768  
m M  
1
2
3
4
5
6
7
8
9
10  
11 12 13 14 15  
Sous-menu  
TA I LLE / CENTRE  
MENU  
b
2 6  
m M  
< ,  
2
1
m M  
< ,  
L
UMINOSITE / CO  
NTR TE  
S
A
5 0  
1 0 0  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
0
1
x
0
x
x
,
,
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
x
1
1
1
1
x
1
x
×
x
x
x
x
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
x
INFORMATIONS  
HORS PLAGE DE  
BALAYAGE  
1
x
x
1
1
x
x
1
I NFORMAT I ON  
MODEL : CPD - G2 2 0  
SER NO : 1 2 3 4 5 6 7  
MANUFACTURED : 2 0 0 0 - 5 2  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ces lingnes ne constituent aucunement un dysfonctionnement ;  
×
×
×
Fils damortissement  
×
1
1
x
1
×
×
×
×
1
,
x
1
1
1
1
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
â
â
Índice  
Precauciones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Configuración . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Ajustes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Características técnicas . . . . . . . . . . . . . . . . . . . . . . 6  
Solución de problemas. . . . . . . . . . . . . . . . . . . . . . . 6  
Especificaciones . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Apéndice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i  
Tabla de sincronización de modo predefinido . . . . . . . i  
â
ä
ä
â
Precauciones  
Advertencia sobre las conexiones de la alimentación  
Notas sobre la limpieza del de la superficie de la pantalla  
Ejemplo de tipos de enchufe  
para 100 a 120 V CA  
Para los clientes en EE.UU.  
Notas sobre la limpieza del gabinete  
ES  
Transporte  
Soporte de pantalla  
Uso del soporte  
Instalación  
No instale el monitor en los siguientes lugares:  
Protección  
3
Configuración  
Ajustes  
Navegación por el menú  
1 Conexión del monitor a la computadora  
1 Pulse el MENU/OK para mostrar el menú principal.  
Menú principal  
SALIR  
TAMANÕ/CENTRO  
MENU  
GEOMETRIA  
COLOR  
CONVERGENCIA  
LANGUAGE  
OPCION  
,
Cable de señal de  
vídeo del monitor  
a HD15 de la  
computadora  
conectado  
Conexión de una computadora Macintosh o  
compatible  
frecuencias  
68,7kHZ/ 85Hz  
1024 768  
resolución de la señal de  
entrada actual (sólo si la  
señal coincide con uno de  
los modos de temporización  
VESA recomendados).  
horizontal y  
vertical de la  
señal de  
entrada actual  
Asignación de pines del cable de señal de vídeo HD 15  
2 Mueva el botón de control m/M para resaltar el menú  
1
2
3
4
5
principal que desee ajustar y pulse el MENU/OK botón.  
6
7
8
9
10  
11 12 13 14 15  
Submenú  
Terminal nº Señal  
Terminal nº Señal  
TAMAÑO/ CENTRO  
MENU  
b
2 6  
3 Mueva el botón de control m/M para resaltar el submenú  
que desea ajustar. A continuación, mueva el botón de  
control </, para realizar los ajustes.  
Ajuste del brillo y el contraste  
2 Encendido del monitor y la computadora  
1 Mueva el botón de control en cualquier dirección para  
1 Conecte el cable de alimentación al monitor y pulse el  
interruptor 1 (alimentación) para encender dicho  
monitor.  
abrir el menú BRILLO/CONTRASTE.  
2 Mueva el botón de control m/M para ajustar el brillo ( ) y  
2 Encienda la computadora.  
</, para ajustar el contraste ( ).  
Innecesario para controladores específicos  
BRILLO / CONTRASTE  
5 0  
1 0 0  
Nota  
Notas  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ajustes de menús en pantalla  
Iconos del menú principal y  
Iconos del submenú y elementos de ajuste  
elementos de ajuste  
0
ENGLISH: Inglés  
NEDERLANDS: Holandés  
FRANÇAIS: Francés SVENSKA: Sueco  
DEUTSCH: Alemán  
ESPAÑOL  
: Ruso  
: Japonés  
1
ITALIANO: Italiano  
: Para ajustar el color de la imagen  
ES  
x Elementos de ajuste  
0: Restauración de los ajustes  
x Para reconfigurar el ajuste para la señal de entrada  
actual  
,
x Para reconfigurar el ajuste para todas las señales de  
entrada  
,
Nota  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Características técnicas  
Solución de problemas  
x No aparece la imagen  
Si el indicador 1 (alimentación) no se ilumina  
Modos predefinidos y de usuario  
1
El indicador 1 (alimentación) aparece en naranja  
Si el indicador 1 (alimentación) se ilumina en verde o parpadea  
en naranja  
Función de ahorro de energía  
x La imagen parpadea, se ondula, oscila o aparece  
codificada  
Modo de  
alimentación  
Consumo de energía  
Indicador  
1 (alimentaci  
ón)  
x La imagen es borrosa  
×
x Aparecen imágenes fantasma  
x La imagen no está centrada o su tamaño no es correcto  
x Los bordes de la imagen aparecen curvos  
x Aparece un patrón ondulado o elíptico (muaré)  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
x El color no es uniforme  
Mensajes en pantalla  
INFORMACION  
FUERA DEL RANGO DE  
AJUSTE  
x El blanco no parece blanco  
1
x Los botones del monitor no funcionan (  
aparece en  
1 Si aparece FUERA DEL RANGO DE AJUSTE:  
pantalla)  
x Las letras y líneas muestran sombras rojas o azules en  
los bordes  
x Se oye un zumbido inmediatamente después de activar la  
alimentación  
1 Si aparece SIN SEÑAL DE ENTRADA:  
1 Si aparece MONITOR EN MODO AHORRO  
ENERGIA:  
ES  
Para ver el nombre, número de serie y fecha de  
fabricación de este monitor.  
I NFORMAT I ON  
MODEL : CPD - G2 2 0  
SER NO : 1 2 3 4 5 6 7  
MANUFACTURED : 2 0 0 0 - 5 2  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Si aparecen líneas finas en pantalla  
(hilos de amortiguación)  
Estas líneas no indican fallo de funcionamiento;  
Especificaciones  
×
×
Hilos de  
amortiguación  
×
×
Función de autodiagnóstico  
1
1
×
×
×
×
x Si el indicador 1 (alimentación) se ilumina en verde  
1 Desconecte el cable de entrada de vídeo o apague la  
computadora conectado.  
2 Pulse el botón 1 (alimentación) dos veces para apagar  
el monitor y volver a encenderlo.  
3 Desplace el joystick, durante 2 segundos.  
x Si el indicador 1 (alimentación) parpadea en  
naranja  
Apague (OFF) el monitor y vuelva a encenderlo (ON).  
1
1
1
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Preset mode timing table  
No. Resolution Horizontal Vertical  
Graphics  
(dots × lines) Frequency Frequency Mode  
1
2
3
4
5
640 × 480  
720 × 400  
800 × 600  
800 × 600  
832 × 624  
31.5 kHz  
31.5 kHz  
46.9 kHz  
53.7 kHz  
49.7 kHz  
60 Hz  
70 Hz  
75 Hz  
85 Hz  
75 Hz  
VGA-G  
VGA-Text  
VESA  
VESA  
Macintosh 16"  
Color  
6
7
8
1024 × 768  
60.0 kHz  
68.7 kHz  
75 Hz  
85 Hz  
60 Hz  
VESA  
VESA  
VESA  
1024 × 768  
1280 × 1024 64.0 kHz  
If the input signal does not match one of the factory preset modes  
above, the Generalized Timing Formula feature of this monitor  
will automatically provide an optimal image for the screen as long  
as the signal is GTF compliant.  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sony Corporation Printed in U.S.A.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Shure Car Stereo System PA421A User Manual
Singer Sewing Machine 143G2 User Manual
Sony Clock Radio CFD G700CP User Manual
Sony Computer Monitor LMD1510W User Manual
Sony Home Theater System DAV DX255 User Manual
Spectra Digital Photo Keychain DPF 105 User Manual
Stiga Trimmer SH 60 PRO User Manual
Sylvania Flat Panel Television LC427SSX User Manual
Symphonic TV DVD Combo COLOR TV DVD User Manual
Targus Home Security System DEFCON 3 User Manual