StorNext 3.5 File System and Storage Manager
Supported Operating Systems and Platforms
Operating System
Kernel or Release
Platform
Windows 2003 Server
Windows XP
SP2
x86 32-bit
x86 64-bit
x86 32-bit
x86 64-bit
x86 32-bit
x86 64-bit
x86 32-bit
x86 64-bit
x86 64-bit
ꢀ
ꢀ
ꢀ ꢀ ꢀ* ꢀ
SP2
SP3
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Windows Vista
SP1
Windows 2008 Server
—
ꢀ ꢀ ꢀ* ꢀ
Red Hat Enterprise
Linux 4
2.6.9-67.EL (Update 6)
2.6.9-78.EL (Update 7)
ꢀ
ꢀ
2.6.18-53.EL (Update 1)
2.6.18-92.EL (Update 2)
Red Hat Enterprise
Linux 5 (all versions,
excluding virtualization)
x86 64-bit
ꢀ ꢀ ꢀ ꢀ ꢀ**
SUSE Linux Enterprise
Server 10
2.6.16-46-0.12 (SP1)
2.6.16-60-0.27 (SP2)
5.10
x86 64-bit
ꢀ ꢀ ꢀ ꢀ ꢀ
ꢀ
Sun Solaris 10
SPARC 64-bit
Opteron x86
64-bit
—
ꢀ
ꢀ
ꢀ
Intel x86 64-bit
—
5.3‡
ꢀ
ꢀ
ꢀ
IBM AIX
HP-UX
64-bit Power
Architecture
11i v2‡
IA-64
Apple MacOS X Support
StorNext 3.5 MDC Server has been validated with Apple Xsan 2.1 clients.
Note: When adding StorNext Storage Manager to a StorNext File System environment, the metadata controller (MDC) must be moved to a supported
platform. If you attempt to install and run a StorNext 3.5 server that is not supported, you do so at your own risk. Quantum strongly recommends against
installing non-supported servers.
*
Windows Distributed LAN Server supports up to 128 distr buted LAN clients.
** Due to a bug in RHEL5, Storage Manager systems will crash when running kernels based on 2.6.18-8. This has been corrected in RHEL5 updates 1 and
2. For additional details, refer to CR 16484 in the Known Issues section of the StorNext 3.5 Release Notes.
‡
StorNext support will transition from HP-UX 11i v2 to 11i v3, and from IBM AIX 5.3 to 6.1 on a future date.
© 2008 Quantum
ST00531 December, 2008
Download from Www.Somanuals.com. All Manuals Search And Download.
StorNext 3.5
Supported Libraries and Tape Drives
Vendor
Libraries
Drive Types
Minimum Library
Firmware Levels
Notes
Quantum /
ADIC
Scalar i500
IBM LTO-1, IBM LTO-2,
IBM LTO-3, IBM LTO-4
IBM LTO-3 WORM, IBM
LTO-4 WORM, HP-LTO-4
420G.GS00400
415G.GS00400 for
Dell PV ML6000
Library firmware
upgrade may be
required for LTO-3
WORM support.
Scalar i2000
Scalar 24
IBM LTO-1, IBM LTO-2,
IBM LTO-3, IBM LTO-4
IBM LTO-3 WORM,
IBM LTO-4 WORM, HP
LTO-4, HP LTO-4 WORM,
DLT-S4
120A
Library firmware
upgrade may be
required for LTO-3
WORM support.
IBM LTO-1, IBM LTO-2,
IBM LTO-3
107A.GY002
Not including WORM.
Not including WORM.
Scalar 50
HP LTO-4
V42.0
Scalar 100
IBM LTO-1, IBM LTO-2,
IBM LTO-3, AIT-2
2.05.0003
Scalar 1000
Scalar 10K
IBM LTO-2, IBM 3590B1A
AIT-1
3.00.0017
IBM LTO-1, IBM LTO-2,
IBM LTO-3, IBM LTO-3
WORM, IBM LTO-4, AIT-2,
AIT-2 WORM
110A.00001
Must use SDLC/CSI
or SCSI alone.
Library firmware
upgrade may be
required for LTO-3
WORM support.
Scalar AML/J, None
AML/E,
AML/2
Last supported
StorNext release was
SN 3.0.1.
PX500
001A
Last supported
StorNext release was
SN 3.0.1.
PX502
PX720
HP LTO-3
30.0
4.00
Not including WORM.
Not including WORM.
HP LTO-2, HP LTO-3
DLT-S4
Dell
HP
PV136T
IBM LTO-2, IBM LTO-3,
IBM LTO-4
3.11
4.10
0507
ESL E series
HP LTO-3, HP LTO-4
Including regular and
WORM.
MSL 6000
MSL 2024/
4048/8096
HP LTO-2, HP LTO-3,
HP LTO-4
Including regular and
WORM.
EML
HP LTO-3, LTO-4
1070
4680
Includes LTO-4 WORM.
IBM
TS3500
IBM LTO-2, IBM LTO-3,
IBM LTO-4, IBM 3592
© 2008 Quantum
ST00531 December, 2008
Download from Www.Somanuals.com. All Manuals Search And Download.
StorNext 3.5
Supported Libraries and Tape Drives (Continued)
Vendor
Libraries
Drive Types
Minimum Library
Firmware Levels
Notes
Qualstar
Sony
XLS
IBM LTO-4
0880
6.30
Petasite
ACSLS: 9310
IBM LTO-4 drive (T1600)
9840, 9940 and T10K
Sun /
StorageTek
ACSLS: 9710,
9740
9840 and 9940
For ACSLS 9740,
2000
SCSI/FC: 9740
ACSLS: L5500
ACSLS: L700
SCSI/FC: L700
ACSLS: L180
SCSI/FC: L180
T10K
T10K
0236
0200
3.77
When using T10000
drives, the STK
library parameter
Fastload must be set
to OFF.
ACSLS: SL8500 T10K
HP LTO-2, HP LTO-4
IBM LTO-2, IBM LTO-4
Sun/Stk 9940B
ACSLS: SL500
IBM LTO-3, IBM LTO-4
HP LTO-4
1201
Not including WORM.
Notes: Sun/StorageTek no longer supports ACSLS version 6.x. Version 7.0 or higher is required.
Before using DLT cleaning with DLT-S4 or SDLT 600 drives, configure the library (Scalar i2000 or PX720)
to disable reporting of the media ID. If media ID reporting is not disabled, StorNext will not recognize the
cleaning media (SDLT type 1).
© 2008 Quantum
ST00531 December, 2008
Download from Www.Somanuals.com. All Manuals Search And Download.
StorNext 3.5
Minimum Firmware Levels for Drives
Drive Type
IBM LTO-1
IBM LTO-2
IBM LTO-3
IBM LTO-3 WORM
IBM LTO-4
HP LTO-2
HP LTO-3
HP LTO-4
DLT-S4
Minimum Drive Firmware Level
Notes
25D4
3AY4
4C17
Includes ULT3580-TD1 and Ultrium-TD1
ULT3580-TD2 and Ultrium-TD2
ULT3580-TD3 and Ultrium-TD3
71G0
No minimum level required
No minimum level required
No minimum level required
1F1F
3590B1A
T10K
No minimum level required
No minimum level required
No minimum level required
AIT-1
AIT-2
AIT-2 WORM
No minimum level required
9940A
Note: When using IBM Ultrium-TD3 drives with SUSE Linux Enterprise Server 10, you
must upgrade the drive firmware to version 64D0 or later.
© 2008 Quantum
ST00531 December, 2008
Download from Www.Somanuals.com. All Manuals Search And Download.
|