In-Ceiling Speaker
CM1001d
Technical Information for System Engineers
Key Features
• One 254 mm (10.0 in) polypropylene woofer.
• 150 Watt optional transformer and high
output (115.5 dB) for the sound rein-
forcement and PA markets.
• Rapid installation blind-mount, fixed-
wing mounting mechanism mount-
ing mechanism with constant tension
design affixes to ceiling thicknesses
ranging from 6.4 mm (0.25 in) to 42.9
mm (1.69 in).
Tile bridge included
Specifications: CM1001d
System Type
10” Subwoofer, in-ceiling, ported (150 Watt optional
transformer for 25/70.7/100 Volt or 4 ohm direct)
• Separate tool-free magnetic grille &
bezel assembly for ease of install &
in-field painting.
Impedance (nominal) 1
4 ohm
Sensitivity dB @ 2.83V/1M
Sensitivity dB @ 1W/1M 2
Distance Factor
Frequency Response (- 3 dB) 3
Frequency Response (-10 dB) 3
Max. Program Power 4
Max. Continuous Power RMS 5
Max. UL program power
Max. Power SPL @ 1 M 6
Max. SPL @ x% distortion 7
Coverage Angle (-6 dB @ 2 kHz)
96.5dB
93.5dB
N/A
53 Hz - 120 kHz
40 Hz - 300 kHz
300w
150w
100w
115.5dB
N/A
N/A
• Iridite-plated steel grille with protective
powder-coated finish for lasting durability.
• Easy access 5-position selectable tap
switch for 25, 70.7, 100 Volt and low
impedance applications simplifies
ordering & inventory tracking.
• 93.5 dB sensitivity (1w/1m)offers high-
output capabilities & reduced amplifica-
tion costs.
Coverage Angle (-6 dB @ 10 kHz) N/A
• UL 2043 & 1480 approval pending.
Directivity Factor (Q)
Directivity Index (DI) dB
Tap Selector
N/A
N/A
• Included accessories: Tile bridge,
Euroblock connector & paint mask.
5-Position rotary switch with 4 ohm direct
Transducer - Low Frequency Driver 254mm (10in) Polypropylene cone, butyl rubber surround
Transducer - High Frequency Driver N/A
• Optional accessories: Pre-construction
bracket, junction box.
Low Frequency Voice Coil
Crossover Frequency
Network Type: Low Pass
Network Type: High Pass
Enclosure Material
Motor-board
Grille
Inputs
Colors
Backcan Diameter
Backcan Height
Visible Diameter
Visible Height
Mounting Hole Diameter
Min / Max Ceiling Thickness
Weight
Shipping Weight
Accessories
Included
35.0mm 1.38in
100.0 kHz
6dB per octave, 1st order
N/A
Drawn steel backcan with ABS baffle
N/A
Iridite-plated steel with powder-coat finish
4 Pin, 5mm Euroblock for individual or daisy chain connection
Black or white
11.68 in / 296.7 mm
11.77 in / 299.0 mm
14.76 in / 374.9 mm
1.08 in / 27.4 mm
12.75 in / 323.9 mm
0.25 in / 6.4 mm – 1.69 in / 42.9 mm
27.0 lb / 12.3 kg
Description
The CM1001d is an 10” in-ceiling
subwoofer design that delivers additional
low-end response (40 Hz) for satellite/
subwoofer applications. The CM1001d
speaker design incorporates a low-profile
grille and 5-position tap switch with 4 Ohm
direct. All mounting hardware is included
and features a fast and secure fixed-wing
mounting system.
Applications
32.0 lb / 14.5 kg
Designed for in-ceiling background
subwoofer applications, the CM1001d
includes a proprietary fixed-wing con-
stant-tension mounting system for ease
of installation. True low-end response (40
Hz) and high sensitivity (93.5 dB 1W/1M)
make the CM1001d ideal for additional
bass response in convention centers, air-
ports and other large venue in-ceiling
subwoofer applications.
Tile bridge, Euroblock connector & installation aid
Pre-Construction Bracket (AC-CM8-PCB),
Junction Box (AC-CM-JBOX)
Optional
Packaging
1 per box
Transformer Taps
1
70.7 V Output
100 V Output
25 V Output
19w 106.5dB
9.5w 103.5dB
4.8w 100.5dB
2.4w 97.5dB
Impedance listed per IEC 60268-5 with
a minimum less than 80% the nominal
impedance
150w 115.5dB 150w 115.5dB
2
3
75w 112.5dB
38w 109.5dB
19w 106.5dB
75w 112.5dB
38w 109.5dB
1w1m sensitivity determined using
nominal impedance
Frequency response measured in half
or full space as dictated by speaker
mounting configuration
Patented SoundTube
Technologies
4
Max program power is 3 dB above max
continuous power
SoundTube Entertainment is constantly
developing new technologies that enhance
audio product performance. SoundTube
5
6
7
Continuous power rating, EIA-426-B test
Max output based on max continuous power
Max useable SPL based on testing
by NWAA Labs
© 2007 SoundTube Entertainment. All rights reserved. PN TS-CM590 REV 11.06.07
SoundTube continually develops new product innovations and improvements. Updates to existing
products without prior notice are an example of SoundTube’s drive for constant improvement.
Download from Www.Somanuals.com. All Manuals Search And Download.
In-Ceiling Speaker
CM1001d
Technical Information for System Engineers
Included Accessories
wiring input connector shall be a 4-pin, 5 mm
Euroblock for 4 Ohm or distributed systems
and shall accept from 10 – 22 gauge wire.
The maximum backcan dimensions shall
be no more than 299 mm (11.77 in) in height
by 296.7 mm (11.68 in) in diameter. The maxi-
mum visible dimensions shall be no more
than 27.4 mm (1.08 in) in height by 374.9 mm
(14.76 in) in diameter. The backcan shall be
constructed of iridite-plated steel.
325.1 mm
(12.80 in)
600.1 mm
(23.62 in)
Min.
4 mm ( 0.16 in)
Max.
49 mm (1.91 in)
The system shall include a 16-gauge galva-
nized steel support backing plate (tile bridge)
to reinforce the ceiling material and tile sup-
port rails. The maximum tile bridge dimen-
sions shall be no more than 600.1 mm (23.62
in) in length by 428.2 mm (16.86 in) in width
and 10.4 mm (0.41 in) in thickness with 325.1
mm (12.80 in) cutout for speaker mounting.
Fixed Wing Mounting System
428.2
(16.86 in)
Tile Bridge
The grille shall be constructed of iridite-
plated, powder-coated steel with an ABS
bezel for lasting performance. The affixed
grille and bezel shall be mounted to the
speaker enclosure (backcan) via magnetic
strip. Also included are a paint mask for in-
field painting and an installation aid that
serves as a handhold during mounting.
Paint Mask
Suspension Cable & Hardware
Optional Accesories
The CM1001d has an optional Pre-Con-
struction Bracket (AC-CM8-PCB) that shall
be compatible with an optional Junction Box
(AC-CM-JBOX). An 18-gauge wire whip and
Euroblock connector shall be included with
the junction box. The maximum dimensions
of the Pre-Construction Bracket shall be no
more than 635 mm (25.0 in) in length by 457.2
mm (18.0 in) in width and 127 mm (5.0 in) in
thickness with a 326.5 mm (12.85 in) cutout
for speaker mounting.
Pre-Construction Bracket (AC-CM8-PCB) Junction Box (AC-CM-JBOX)
The system shall be the SoundTube
CM1001d subwoofer for both low & high
impedance applications.
SoundTube Entertainment
6430 North Business Park Loop
Park City, Utah 84098
Phone 435.647.9555
Fax
435.647.9666
Toll Free 800.647.TUBE
All SoundTube products come
with a 5-year limited warranty.
SoundTube Entertainment manufactures a complete line of speakers for:
Open-Ceiling • In-Ceiling • Surface-Mount • Outdoor • Sound-Focusing
All SoundTube products are designed and engineered in the USA.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|