Operating and Installation
Instructions
Ceramic Cooktop
KM 5820
en - US, CA
To prevent accidents and
appliance damage,
read these instructions
before
installation or use.
M.-Nr. 07 844 700
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Description of the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Cooktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Clean the cooktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Heat the cooktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
How the burners operate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Turning ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Power settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Cooking with Auto-heat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Variable burner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Turning off and residual heat indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Selecting cookware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Setting the timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Turning a burner off automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Using both timer functions at the same time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Safety features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Child safety lock / System lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Stop and Go. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Safety shut-off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Overheat protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Technical Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . 38
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Sealing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Tiled surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Installation dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Help protect our environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Children
WARNING- When using your
Use the safety lock to ensure that
~
unsupervised children cannot turn on
appliance follow basic
precautions, including the
following:
the cooktop or change the settings.
Children should not be left
~
Read all instructions before
installation or use to prevent
injury and appliance damage.
unattended in an area where the
appliance is in use. Never allow
children to sit or stand on any part of
the appliance.
Caution: Do not store items of interest
to children in cabinets above the
appliance. Children climbing on the
appliance to reach these items could
be injured.
This appliance conforms to all
uniform safety codes and
regulations.
Keep these operating instructions
in a safe place and pass them on
to any future user.
The appliance is hot during use and
~
remains so for some time after being
switched off. Keep children away from
the appliance.
SAVE THESE INSTRUCTIONS for a
future user.
Keep all pots and pans out of the
~
reach of children. Danger of burning or
Correct usage
scalding.
Only use the cooktop for residential
~
Pot and pan handles should be
~
cooking, and for the purposes
described in this manual.
Other uses are not permitted and can
be dangerous.
turned inward and not extend over the
countertop to reduce the risk of burns,
ignition of flammable materials, and
spills.
Persons who lack physical, sensory
~
Ensure that any packing material is
~
or mental abilities, or experience with
the appliance should not use it without
supervision or instruction by a
responsible person.
disposed of safely and kept out of the
reach of children. Danger of
suffocation!
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Technical safety
Before servicing, disconnect the
~
appliance from the main power supply.
Installation, repair and maintenance
~
work should be performed by a Miele
authorized service technician. Work by
unqualified persons could be
Do not operate any appliance with a
~
damaged cord or plug, or if the
appliance has been damaged in any
manner. Contact Miele’s Technical
Service Department.
dangerous and may void the warranty.
Be sure your appliance is properly
~
installed and grounded by a qualified
Under no circumstances open the
~
outer casing of the appliance.
technician.
Before installing the cooktop, check
~
for externally visible damage. Do not
While the appliance is under
~
warranty repairs should only be
performed by an authorized service
technician. Otherwise the warranty is
void.
operate a damaged appliance.
To guarantee the electrical safety of
~
this appliance, continuity must exist
between the appliance and an effective
grounding system. It is imperative that
this basic safety requirement be met. If
there is any doubt, have the electrical
system of the house checked by a
qualified electrician.
In the event of any damage to the
~
appliance, it must be turned off
immediately and disconnected from the
main power supply. Contact Miele’s
Technical Service Department.
Do not use the appliance until it has
been repaired. Ensure power is not
supplied to the appliance until repair
work is completed.
Before installation, make sure that
~
the voltage and frequency listed on the
rating label correspond with the
household electrical supply. To prevent
injury and appliance damage, these
data must match. Consult a qualified
electrician if in doubt.
Defective components should be
~
replaced by Miele original spare parts
only. Only with these parts can the
manufacturer guarantee the safety of
the appliance.
Do not use an extension cord to
~
connect this appliance to the electrical
supply. Extension cords do not ensure
the required safety of the appliance.
Do not cook on a broken cooktop.
~
Any breakages or cracks in the ceramic
surface of the appliance are defects
and must be treated as such. If the
cooktop should break, cleaning
Install the appliance so that the
~
power cord does not come into contact
with any portion of the cooktop which
may become hot during use.
solutions and spills may penetrate the
broken cooktop and create a risk of
electric shock. Do not use the
Do not use the appliance until it has
~
been properly installed in the
appliance until it has been repaired.
countertop.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Safety
Never use the appliance to heat a
~
room. Due to the high temperatures
DO NOT TOUCH THE COOKING
~
AREA OR THE VICINITY AROUND THE
radiated, objects left near the appliance
could catch fire.
COOKING AREA - During operation,
the cooking area and its surroundings
Do not store items on the appliance
~
will get hot and can cause burns. When when not in use. Items could melt or
the cooktop is shut off, the surface may catch fire from residual heat or if the
remain hot enough to cause harm, even appliance is turned on inadvertently.
though the glow is not visible through
the dark glass. During and after use, do after use.
not touch or let clothing or other
Always switch the cooking zone(s) off
Never cover the burner with a cloth
~
or protective oven foil. If inadvertently
flammable materials contact the
cooking area or the vicinity around the
cooking area until they have had
sufficient time to cool. As long as the
surface temperature is high enough to
cause a burn, the Residual Heat
turned on or if there is residual heat, a
fire could result.
Be aware of loose fitting or hanging
~
garments when operating the
appliance, they may present a fire
hazard.
Indicator will remain lit. Once sufficient
time has passed the indicator will go
out and the surface is safe to touch.
Never leave an appliance
~
Protect your hands with oven mitts
~
or potholders when using the
unattended at high settings or when
cooking with oil or fat. Overheated oil
could ignite. Always heat oil slowly,
monitoring it as it heats.
appliance. Use only dry, heat resistant
potholders. Moist or damp potholders
used on hot surfaces can result in
steam burns. Do not let the potholder
touch the hot heating elements. Do not
use towels or other bulky items near the
appliance.
Do not store aerosols, combustibles
~
or any other easily flammable materials
underneath or adjacent to the
appliance.
Do not use water on grease fires.
~
Do not heat unopened containers.
~
Built-up pressure may cause the
Smother or use a dry chemical or
foam-type extinguisher on any fire or
flame.
container to burst and result in injury.
Do not flambé under an exhaust
~
hood. Flames could be drawn up into
the hood by the suction and the grease
filters may ignite.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Make certain that the power cords of
~
small appliances do not come in
To prevent damage to the cooktop
~
do not use pots and pans with thin
bases on the cooktop. Never heat an
empty pan unless the pan manufacturer
states that you can do so.
contact with the appliance. The
insulation of the cable could become
damaged. Danger of electric shock!
The control panel and/or the areas
~
around the cooktop (the cooktop
Before using glass, glass/ceramic,
~
ceramic, earthenware or other glazed
frames or surrounding (in the case of
cookware verify that they can be used
facet cooktops) may become hot due to on a cooking surface.
the following factors: operating time,
Do not use plastic or aluminum foil
~
cookware. It melts at high
high output settings, large cook ware,
and number of burners in operation.
temperatures. Fire hazard.
Be careful not to drop anything on
~
To prevent burns and breathing
~
the ceramic surface of the cooktop.
Even lightweight objects may cause
damage.
difficulty, allow the cooktop to cool
before cleaning. Some cleaners may
produce toxic fumes if applied to a hot
surface.
Use the proper pan size. Select
~
cookware with flat bottoms large
Keep the cooktop clean. Grains of
~
salt and sand can cause scratches.
enough to cover the heating element.
Using undersized cookware will expose
a portion of the heating element and
may result in ignition of clothing or
When wiping spills on a hot cooktop
~
with a wet sponge or cloth, be careful
handles becoming hot. The proper size to avoid steam burns.
pot or pan will also improve efficiency.
Do not let flammable materials,
~
i.e. cooking grease, accumulate on the
Do not use pots or pans with
~
pronounced edges or ridges on the
ceramic cooktop. These could scratch
the cooktop permanently. See
appliance.
Do not use a steam cleaner to clean
~
this appliance. Steam could penetrate
electrical components and cause a
short circuit.
"Selecting cookware" for more
information. Grains of salt and sand can
cause scratches. Make sure that the
bases of any pots and pans are clean,
free of any fat or oils and are dry.
Do not allow either solid or liquid
~
sugar, pieces of plastic or foil to fall on
the burners when they are hot. If these
residues are allowed to cool on the
ceramic surface pitting or even
cracking may occur.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Any spills should be removed as
~
quickly as possible to prevent them
from burning on and becoming difficult
to remove.
Aluminum cookware or cookware
~
with aluminum base can cause shiny
metallic spots. These spots can be
removed with ceramic glass or
stainless steel cleaner (see "Cleaning
and Care").
Never heat up an empty pot, unless
~
the manufacturer explicitly allows this
can be done! Failure to comply can
result in a damaged cooktop.
NEVER set down hot pots or pans in
~
the area of the control panel. This can
damage the underlying electronics.
If the cooktop built in behind a
~
cabinet door, it should only be
operated with the door open.
Close the door only when the appliance
is shut off and the Residual Heat
indicators have gone out.
SAVE THESE INSTRUCTIONS
AND REVIEW THEM
PERIODICALLY
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the appliance
Cooktop
aThree-zone variable burner
bTwo-zone variable burner
cOne-zone burner
dControl panel
Burner
C Diameter
Output in watts at
208 / 240 V
inches
cm
Left a
5 11/16"
8 1/4"
14.5
21
1100
2150
3100
10 5/8"
27
Right rear b
4 3/4"
12
18
700
7 1/16"
1800
Right front c
5 11/16"
14.5
1200
Total:6100
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the appliance
Control panel
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the appliance
Touch controls
aCooktop On/Off
bSettings bar
- Setting the power level
- Setting the time
cChild safety lock
dVariable burner On/Off
eBurner On/Off
fStop and Go
g- Timer activation
- Switching between timer functions
- Selecting the shut-off time (see "Automatic burner shut-off")
hHour function
Indicator lights
iPower-ON indicator
jChild safety lock
kVariable burner-On
Burner display
l-
= Burner is ready for use
= Burner is turned on
0
1 to 9
= Power level
#
= Residual heat
A = Auto-heat with extended range of power levels
mIndicator light for auto-heat or extended range of power levels (see
"Programming")
Timer display
nIndicator light for burner selection, e.g. right rear burner
o00 to 99 = Time in minutes
0.^ to 9^ = Time in hours
PS
= Programming (see respective chapter)
F = Fault (see "Safety shut-off)
pIndicator light for half-hours with a timer setting of more than 99 minutes
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Clean the cooktop
Heat the cooktop
^ Before using for the first time, clean
the appliance with a damp cloth and
dry with a soft cloth.
Only for facet cooktops:
A small gap between the cooktop
and the work surface may be visible
in the first days of operation. It will
become smaller during use. Despite
this small gap, the electrical safety of
your appliance is always ensured.
Do not use liquid dish soap to clean
the cooktop, this may cause
permanent blue discolorations.
Metal components of the appliance
have a protective coating which may
give off a slight odor the first time the
appliance is heated.
The smell will dissipate after a short
time and does not indicate a faulty
connection or appliance defect.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
How the burners operate
One-zone burners use one heating
strip; two-zone burners and grill zones
have two heating strips. Depending on
the model, the heating strips may be
separated by a ring.
One-zone burner
Each burner has overheating protection
(internal temperature limiter) feature to
prevent the ceramic glass from
overheating (see "Overheat protection").
aOverheat protection
When a power level is set, the heat
element turns on and the heating strip
is visible through the ceramic glass.
bHeating strip
The power setting determines how hot
the burner will get, and is electronically
regulated. This means that the burner
will switch on and off as needed to
maintain the selected power level.
Two-zone burner
aTechnical detail, not a defect
bOverheat protection
cOuter heating strip
dInsulation
eInner heating strip
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Turning ON
To turn a burner on and select a
power level
The cooktop must be turned on before
any of the burners can be used.
^ Touch the On/Off touch control for
the desired burner.
Do not leave the appliance
unattended during operation!
0 appears in the burner display.
To turn the cooktop On:
^ Touch the s On/Off touch control .
The power-ON indicator will turn on and
- will appear in all the burner displays.
If no further entry is made, the cooktop
will turn itself off after a few seconds for
safety.
^ Touch the desired power level
number on the settings bar.
For a setting between two power
levels (see "Power settings"), press
the area between the numbers.
The power level setting will flash for a
few seconds and then remain steady.
To change the power level
^ Touch the On/Off touch control for
the desired burner.
The power level will flash in the burner
display.
^ Touch the respective number on the
settings bar to set the desired power
level.
If only one burner is on, the power
level can be changed without
activation.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Power settings
The cooktop is factory-programmed with 9 power levels. If you would like finer
setting control, you can extend the power levels (see "Programming"). The
intermediate levels will appear with a lighted dot next to the number.
Cooking process
Power level*
Standard
Extended
settings
factory settings
(9 power levels)
(17 power levels)
Melting butter, chocolate, etc.
Dissolving gelatin
1 - 2
1 - 3
1 - 2.
Preparing yogurt
Thickening sauces containing egg yolk and butter
Warming small quantities of liquid
Keeping food warm which sticks easily
Cooking rice
1 - 3.
Warming liquid and half-set foods
Thickening creams and sauces, e.g. zabaglione or
Hollandaise sauce
2 - 4
2 - 4.
Making oatmeal
Preparing omelets, lightly fried eggs
Thawing frozen foods
Steaming vegetables, fish
Cooking pasta
3 - 5
3 - 5.
Boiling and cooking large quantities of food
Gentle frying of fish, cutlets, sausages, fried eggs, etc.
Frying pancakes, etc.
5
5.
6 - 7
7 - 8
8 - 9
6 - 7.
7 - 8.
8. - 9
Boiling large quantities of water
Bringing to the boil
*
These settings are merely guidelines. A higher setting is required for deep pots, larger quantities or
when cooking without a lid. For smaller quantities, select a lower setting.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Cooking with Auto-heat
To deactivate Auto heat-up
When Auto heat-up has been activated, You can turn off the heat-up boost
the burner automatically turns on at the
highest setting (heat-up boost) and
then switches to the previously selected
continued power level. The heat-up
time depends on which continued
power level has been chosen (see
chart).
before the heat-up time has elapsed.
^ Touch the On/Off touch control for
the desired burner.
The burner display flashes.
^ Touch and hold the set continued
power level on the settings bar until
the indicator light and A go out; or set
a different power level.
With higher continued power levels,
only a relatively short heat-up time is
required.
Continued
Heat-up time
Power Level*
(approx.) min:sec
To activate Auto-heat
1
1.
2
1 : 20
2 : 00
2 : 45
3 : 25
4 : 05
4 : 45
5 : 30
6 : 10
6 : 50
7 : 10
1 : 20
2 : 00
2 : 45
2 : 45
2 : 45
2 : 45
-
^ Touch the On/Off touch control for
the desired burner.
The burner display flashes.
2.
3
^ Touch and hold the desired
continued power level number on the
settings bar until a signal sounds and
the Auto-heat indicator lights up.
3.
4
After the heat-up time, the Auto-heat
indicator will go out.
4.
5
With the extended settings (see
"Programming"), A flashes alternately
with the continued power level until the
heat-up time has finished.
5.
6
6.
7
Changing the continued power level
deactivates Auto-heat.
7.
8
8.
9
* The continued power level marked
with a dot are only available with the
extended power level settings (see
"Programming").
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Variable burner
Two-zone burner
With some cooktop models (see
"Description of the appliance"), you
can turn on a second or third burner
zone when using larger pots.
^ Touch the On/Off touch control for
the desired burner.
^ Set the desired power level.
^ Touch the variable burner n touch
control while the power level flashes
in the burner display.
If you add another burner zone, the
indicator light will be on as long as the
power level is flashing in the burner
display. When the power level stops
flashing and stays steady, the indicator
light goes out. With the three-zone
burner, the display does not
Three-zone burner
^ Touch the On/Off touch control for
the desired burner.
differentiate between second and third
burner zones.
^ Set the desired power level.
^ While the power level flashes in the
burner display, tap the variable
burner n touch control until the
desired number of burner zones has
been added.
When you turn off a burner, the added
burner zones are also turned off.
To turn the booster off
^ Touch the On/Off touch control for
the desired burner.
The power level flashes in the burner
display and the variable burner
indicator light turns on.
^ Touch the n touch control until the
indicator light goes out.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Turning off and residual heat
indicators
Residual heat indicator
The bars of the residual heat indicator
go out one after another as the burners
cool down. The last bar only goes out
when the burners are safe to touch.
To turn a burner off
^ Touch the On/Off touch control for
the desired burner.
Do not touch any burner or place
any heat-sensitive items on a burner
as long as the residual heat
indicators are lit up. Danger of
burning!
^ Touch "0" on the settings bar.
A 0 flashes for a few seconds in the
burner display. If the burner is still hot,
the residual heat will be displayed.
After a power failure the residual
heat indicator will flash.
To turn the cooktop off
^ Touch the s touch control.
This turns off all the burners. The
power-ON indicator light goes out. The
residual heat indicator will appear for
each burner which is still hot.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting cookware
– Use cookware with thick, flat, smooth Energy saving tips
bottoms. Slightly concave bottoms
will also work adequately. Pans with
convex bottoms will not cook well.
– For the most even and energy
efficient cooking, the diameter of the
pots/pans should match the diameter
of the burners as closely as possible.
cold
hot
– Cast iron, glass or stoneware should
not be used because they have poor
heat transfer and may scratch the
cooktop surface.
too small
fits
– Whenever possible, keep pots and
pans closed while cooking. This
helps keep in the most possible heat.
– Also unsuitable is plastic or
aluminum foil cookware. These melt
at high temperatures.
– Copper bottom and aluminum
pans may leave a residue on the
cooktop in the form of metallic lines.
This is normal. These lines can be
removed using a non-abrasive
ceramic cooktop cleaner or a
shielded scraper blade.
open
closed
– Use a small pot for small amounts. A
small pot on a small burner needs
less energy then a larger partly filled
pot on a large burner.
Be sure to clean the cooktop after
each use. Each time this residue is
allowed to melt it becomes harder to
remove and may mar the
– Use little water when cooking and
take care to select a lower energy
level as soon as cooking is
completed.
appearance of the cooktop.
Let the cooktop cool before
cleaning.
– For longer cooking periods, you can
switch off the cooking zone 5 to 10
minutes before the total cooking time
is completed. The residual heat will
continue to cook the food.
– Use only pots and pans with flat
bases. Sharp pot and pan bases
scratch the ceramic glass surface.
– Lift the cookware when moving it. In
this way you will avoid streaking from
friction and scratching.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer
The cooktop must be turned on to use
the timer.
The timer can be used for two different
functions:
– To time kitchen activities.
– To set a burner to turn off
automatically.
You can select a time from 1 minute
(01) to 9 hours (9^).
A time up to 99 minutes is set and
displayed in minutes.
Example:
With a time of more than 99 minutes,
the timer must be turned to hours. The
time is set in half-hour increments. The
half hour is indicated by a dot after the
number.
Example (2 hours 30 minutes):
h
When the set time has elapsed, 00 will
appear in the timer display and an
audio signal will sound for a few
seconds.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer
Setting the timer
Minutes
Hours
Example: You want to set a time of 15
minutes.
To set full hours, touch the respective
number on the settings bar.
To set the half hours, touch the space
between 2 numbers on the settings bar.
Example: 2 hours and 30 minutes
^ Turn the cooktop on.
^ Touch the m control.
00 appears in the timer display, and the ^ Turn the cooktop on.
^ Touch the m control.
right 0 will flash.
00 appears in the timer display, and the
right 0 will flash.
h
^ Touch the first number of the time
you wish to set (in this case 1) on the
settings bar.
h
^ Touch the h control to switch the
The timer display changes, 1 flashes on
display to hours.
the right.
h
h
^ Touch the settings bar between the
^ Touch the second number (in this
numbers 2 and 3.
case 5) on the settings bar.
The timer display changes, the 1
"jumps" to the left and 5 appears on the
right.
h
After several seconds, the timer display
stops flashing and turns steady. The
timer starts counting down.
h
The timer begins to count down.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer
To change the set time
^ Touch the m control.
^ Set the desired time as described in
"Setting the timer".
To clear the set time
^ Touch and hold the m control until 00
appears in the timer display.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer
Turning a burner off
automatically
The time counts down in minutes. The
time remaining is shown in the timer
display and can be changed at any
time.
You are able to set a time in which a
burner turns off automatically.
If you want to set another burner to turn
off automatically, follow the same steps
as previously described.
If desired, all of the burners can be
programmed at the same time.
If the programmed time is longer than
the maximum time allowed, the
burner will turn off automatically after
the maximum time allowed (see
"Safety cut-out feature").
If more than one shut-off time is
programmed, the shortest time
remaining will be displayed, and the
indicator light for that particular burner
will flash. The other indicator lights will
be steady. If you want to check on the
remaining time for another burner,
touch the m control until the indicator
light for the respective burner flashes.
^ Select a power level for the desired
burner.
^ Tap the m touch control until the
indicator light for the burner starts
flashing.
If several burners are on, the indicator
lights will flash in a clockwise direction,
starting with the left front.
^ Set the desired time.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer
Using both timer functions at
the same time
The kitchen timer and automatic
shut-off functions can be used at the
same time.
If you have programmed one or more
shut-off times and would also like to
set the kitchen timer:
Tap the m touch control until the
indicator lights for the programmed
burners come on steady and 00
appears in the timer display.
If you have set the timer and would
also like to program one or more
shut-off times:
Tap the m touch control until the
indicator light for the desired burner
flashes.
The shortest remaining time will appear
in the display.
If you would like the other remaining
times to be displayed, tap the m
control until:
- the indicator light for the desired
burner flashes (automatic shut-off).
- the timer display flashes (kitchen
timer).
Starting with the shortest remaining
time, which is shown in the display, all
burners that are in use and the kitchen
timer are selected in a clockwise
direction.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety features
Child safety lock / System lock To activate the locks
Your appliance is equipped with a
safety lock to prevent the cooktop and
the burners from accidentally being
turned on or any settings changed.
^ Touch the $ control until the
respective indicator light comes on.
The indicator light will go out after a
short time.
The Child safety lock can be activated
when the cooktop is turned on. When
the safety lock is activated, the cooktop
has only limited functions:
You can alter the setting from
one-finger to three-finger operation (see
"Programming"), for instance to make it
harder for children to operate the
appliance.
– The burner power levels and the
timer settings cannot be changed.
To deactivate the locks
– The burners, the cooktop and the
timer can be turned off, but once off
they cannot be turned on again.
^ Touch the $ control until the
respective indicator light goes out.
The system lock can be activated
when the cooktop is turned off. When
the system lock is activated, the
cooktop cannot be turned on and the
timer cannot be used.
The appliance is programmed so that
the system lock must be activated
manually.
The system lock can be programmed to
be activated automatically 5 minutes
after the cooktop has been turned off,
providing the safety lock is not
manually activated first (see
"Programming").
If a locked control is touched when the
safety lock or the system lock is
activated, the indicator light comes on
and the timer display shows LC for a few
seconds.
If there is an interruption to the
power supply, the Child safety lock
and the system lock will be
deactivated.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety features
Stop and Go
To activate Stop and Go
Your appliance has a Stop and Go
feature which, when activated, reduces
the power of all the activated burners to
level 1. The burner power-levels and
the timer setting cannot be changed,
the cooktop can only be turned off.
^ Touch the ž control.
The power of the activated burners will
be reduced to level 1.
To deactivate Stop and Go
^ Touch the ž control.
When Stop and Go is deactivated, the
cooking zones resume at the power
level which was last set.
The burners will now run at the power
level that was previously set.
If Stop and Go is not deactivated, the
cooktop turns off after 1 hour.
When Stop and Go is activated:
- the timer will continue without
interruption
- the countdown of a time
programmed for automatic shut-off
will be interrupted,
When deactivated the countdown time
will continue to run.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety features
Safety shut-off
Safety shut-off if the touch controls
are covered
Safety shut-off for cooking times that
are too long
Your cooktop will turn off automatically
if one or several of the touch controls
remain covered for longer than 10
seconds, for example by fingers, food
that boils over or by an object placed
on them.
If a burner is heated for an unusually
long period of time (see chart) at the
same power level, the cooktop will turn
itself off automatically and the residual
heat indicator will appear.
An F will flash in the timer display.
To use the burner again, turn it back on ^ Clean the control panel or remove the
in the usual way.
object covering the control.
Power level*
Maximum operating
time in hours
F will go out. The cooktop can now be
used again.
1 / 1.
2 / 2.
3 / 3.
4 / 4.
5 / 5.
6 / 6.
7 / 7.
8 / 8.
9
10
5
5
4
3
2
2
2
1
*
Power levels with a " ." are only available with
the extended power-level settings (see
"Programming").
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety features
Overheat protection
Each burner is equipped with a
temperature limiter. This feature
automatically turns off the heating
element before the glass ceramic
surface becomes too hot.
When the overheat protection is
triggered, the heating element turns on
and off even at the highest power level.
Once the glass ceramic surface has
cooled to a safe temperature the
heating element will automatically turn
back on.
The overheat protection is activated by:
– turning a burner on without putting a
pan on it.
– heating an empty pan.
– a pan with an uneven bottom not
sitting evenly on the burner.
– the pan not conducting heat
properly.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Do not use a steam cleaner to clean
this appliance. Steam could
Clean any spills immediately before
they become difficult to remove.
penetrate electrical components and
cause a short circuit. Pressurized
steam could cause permanent
damage to the surface.
Clean the appliance regularly,
preferably after each use. Allow the
appliance to cool before cleaning.
Do not use any sharp pointed
objects which could damage the
seal between the ceramic surface,
the surrounding frame and the
countertop.
Ceramic surfaces
^ Wipe off any soiling using a damp
cloth. Stubborn soiling is best
removed with a shielded scraper
blade.
Never use abrasive cleaners,
caustic (oven) cleaners, dishwasher
detergent, scouring pads, steel wool
or hard brushes. They will damage
the surface.
^ Apply a ceramic cleaner (available
from Miele) using a soft cloth or
paper towel.
^ To remove any limescale deposits or
metallic residue apply a ceramic
cleaner using a soft cloth or use a
shielded scraper blade if necessary.
The ceramic surface can be cleaned
using a cleaner for ceramic
surfaces. Follow the manufacturer’s
instructions.
^ After cleaning wipe the ceramic
surface with a damp cloth and dry.
A cleaner with a special additive to
prevent water marks and smears on the
ceramic surface may be used.
Make sure that no cleaner residue
remains on the ceramic surface by
carefully wiping the cooktop with a
damp cloth. They may damage the
cooktop or produce toxic fumes
when heated.
Any melted solids like sugar, plastic or
aluminum foil should be removed as
quickly as possible, while the burner is
still warm. If they are allowed to harden
the cooktop may become pitted.
Be sure that pot and pan bases are
clean and dry.
^ Turn the burner off.
^ Using a shielded scraper blade,
scrape the melted item immediately
off the burner while it is still hot.
Use caution: Danger of burns!
After cleaning dry the ceramic
surface with a soft cloth to prevent a
build up of limescale deposits.
^ Allow the cooktop to cool and clean
as previously described.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
The programming of your cooktop can
be modified (see chart).
To set the program
^ To set the first number, touch the
control for the front left burner
followed by the respective number on
the settings bar.
After starting the programming function
P (Program) and an S (Status) will
appear in the timer display. With
cooktops that have 3 burners, an
additional display appears at the back
left.
^ To set the second number, touch the
control for the back left burner
followed by the respective number on
the settings bar.
The program is displayed in the front
left and back left burner displays.
Example:
To set the status
Program 03 = front left 0, back left 3
^ Touch the control for the front right
burner followed by the respective
number on the settings bar.
Program 14 = front left 1, back left 4
The status is displayed in the front right
burner display.
To save the settings
Once you have left the programming
mode, the cooktop will be reset
automatically. This is completed when
an indicator above the On/Off s touch
control lights up briefly.
^ Touch the s control until the displays
go out.
If you do not wish to save the
settings
Do not turn the cooktop on again
^ Touch the $ control until the displays
go out.
until the reset process is completed.
To start programming
^ With the cooktop turned off, touch
and hold the s control and $ at the
same time, until the Child safety lock
indicator flashes.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
Program*
P
Status**
Setting
00 Demo mode and factory S
0
Demo mode ON
default settings
(after turning the burner on "dE"
appears in the timer display for
several seconds)
S
S
S
1
9
0
Demo mode OFF
Factory default settings restored
P
02 Extended power levels
9 power levels
(1, 2, 3 ... to 9)
S
1
17 power levels
(1, 1., 2, 2., 3 ... to 9)
If Auto-heat boost is selected, A
will flash alternately with the
continued power level.
P
04 Keypad tone when a
S
S
S
S
S
S
S
0
1
2
3
0
1
2
Off
control is touched
Quiet
Medium
Loud
P
05 Audible timer tone
Off
Quiet audible tone for 10 seconds
Medium audible tone for 10
seconds
S
S
S
3
0
1
Loud audible tone for 10 seconds
P
06 Child safety lock
One-finger lock using $
Three-finger lock by touching $
and the touch controls for the two
right-hand burners at the same
time
*
Programs / Settings not listed here have no allocation.
** The factory default settings are shown in bold.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
Program*
Status** Setting
P
07 System lock
S
0
Manual activation of the system
lock
S
1
Automatic activation of the system
lock
P
P
P
P
P
P
08 Auto-heat
S
0
1
0
1
0
1
0
1
0
1
0
1
Off
S
On
11 Second burner zone of S
Does not turn on with the first zone
Always turns on with the first zone
Does not turn on with the first zone
Always turns on with the first zone
Does not turn on with the first zone
Always turns on with the first zone
Does not turn on with the first zone
Always turns on with the first zone
Off
the left front burner
S
12 Second burner zone of S
the right front burner
S
13 Second burner zone of S
the right back burner
S
14 Second burner zone of S
the center back burner
S
15 Audible tone when the
touch control areas are
accidentally covered
S
S
On
P
16 Touch control reaction
S
S
S
0
1
2
Slow
speed
Normal
Fast
* Programs not listed here have no allocation.
** The factory default settings are shown in bold.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
,Repairs should only be carried out by an authorized technician in
accordance with local and national safety regulations. Unauthorized repairs
could cause injury or appliance damage.
Cooktop or burners cannot be turned on
Possible fault
Solution
The circuit breaker has
tripped.
Reset the circuit breaker (see the data plate for
minimum breaker ratings).
There may be a technical
problem.
– Disconnect the appliance from the main power
supply for approx. 1 minute.
Reset the circuit breaker or replace the fuse and
turn the appliance back on. If the appliance still
cannot be turned on, contact a qualified
electrician or Miele.
"LC" appears in the timer display for several seconds after turning on the
cooktop.
The system lock has been
activated.
Deactivate the system lock (see "Child safety lock
/ System lock").
"dE" appears in the timer display for several seconds after switching on the
cooktop. Burners do not heat up.
The device is in demo mode. Deactivate demo mode (see "Programming").
The cooktop turns off while it is in use.
One of the burners has been Not a fault. You can start the burners again (see
on for too long.
"Safety shut-off").
The heating for one of the burners turns on and off.
Power levels 1 to 8:
Not a fault.
This turning on and off is normal. It is caused by
the electronic heat regulation (see "How the
burners operate").
Power level 9: Fault.
The overheating protection
has triggered.
The overheat protection automatically turns a
burner off if the ceramic surface is in danger of
overheating. Once the ceramic surface has
cooled down, the burner automatically turns back
on (see "Overheat protection".)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
The cooktop turns off while in use, and a flashing F appears in the timer
display.
Possible fault
Solution
One or several of the touch
controls are covered, for
example by fingers, food
boiling over or by an object.
Clean the control panel or remove the object
(see "Safety shut-off".)
Auto-heat is turned on, but the food does not start cooking.
Large amounts of food are
being heated.
Start cooking at the highest power level, then
reduce the power level manually.
The cookware conducts heat
poorly.
See "Selecting cookware".
One or several residual heat indicators are flashing.
There was a power failure
during operation, and the
cooktop shut itself off.
Not a fault.
Restart the cooktop.
The residual heat indicators
have lit up during
Not a fault.
The display flashes until the maximum residual
heat has expired or the burner is selected and
activated.
programming.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
The sensor switches are hypersensitive or not sensitive enough.
Possible fault
Solution
The sensitivity of the
touch controls has
changed.
First, ensure that the cooktop is not in direct sunlight or
strong artificial light and that the area around the
cooktop is not too dark.
Make sure that neither the cooktop or the touch controls
are covered. Remove any cookware and clean the
cooktop, removing any food residues.
Disconnect the cooktop from the main power supply for
approx. 1 minute.
If the problem persists, contact Miele.
FE flashes alternately with numbers in the timer display.
There is a fault in the
electronics.
Disconnect the cooktop from the main power supply for
approx. 1 minute.
If the problem persists after reconnecting the power
supply, contact Miele.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Service
In the event of a fault which you cannot easily fix yourself, please contact the
Miele Technical Service Department at the address on the back of this booklet.
When contacting Technical Service please quote the serial number and model of
the appliance.
Adhere rating label sticker supplied with the appliance below.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE
Information is subject to change. Please refer to our website to obtain the most
current product specification, technical & warranty information.
To prevent accidents
and appliance damage
read these instructions
before
installation or use.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS
Note to the installer:
This appliance has not been
~
Please leave this instruction book
with the consumer for the local
electrical inspector’s use.
designed for maritime (e.g. ships) use
or for use in mobile installations such as
recreational vehicles or aircraft.
However, under certain conditions it
may be possible for installation in these
applications. Please contact the Miele
Technical Service Department with
specific requirements.
The minimum distances given in
these Installation Instructions must
be observed in order to ensure safe
operation. Failure to do so increases
the risk of fire.
You must ensure the power cable
~
for the appliance will not come into
contact with the floor panel after
installation, nor be subject to any
mechanical strain.
The cabinetry and venting hood
should be installed first to prevent
damage to the cooktop.
The cooktop must not be
The countertop must be bonded
~
~
permanently sealed into the countertop
when installed. The sealing strip under
the edge of the cooktop provides a
sufficient seal for the countertop. See
"Sealing".
with heat resistant (212°F/100°C)
adhesive to prevent distortion or
dissolving.
Any back splashes should also be
heat-resistant.
The safety distances specified in
The cooktop must not be installed
~
these instructions must be followed
carefully.
~
over a dishwasher, washer, dryer,
refrigerator or freezer. Heat radiated by
the cooktop may damage them.
To eliminate the risk of burns or fire
~
Keep this instruction book in a safe
place for reference and pass it on to
any future user.
by reaching over heated surfaces
cabinet storage space above the
appliance should be avoided. If cabinet
storage is necessary, the risk can be
reduced by installing a venting hood to
project horizontally a minimum of 5"
(127 mm) beyond the bottom of the
cabinets.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS
Safety distance from divider
Safety distances above the
appliance
Installation of a divider under the
cooktop is not required.
If a divider is fitted under the cooktop,
the distance between the upper edge
of the work surface and the upper edge
of the divider must be at least 4 ½ "
(110 mm).
A gap of at least 1 3/8"" (35 mm) must
be provided between the rear edge of
the divider and the rear wall of the
cabinet so that the power cord can be
passed through.
The minimum safety distance given by
the hood manufacturer must be
maintained between the cooktop and
the hood above it. See the installation
instructions of the hood for these safety
measurements.
If the hood manufacturer's instructions
are not available or if flammable objects
are installed over the cooktop
(e.g. cabinets, utensil rail, etc.), a
minimum safety distance of 30"
(760 mm) must be maintained.
If there is more than one appliance
beneath a hood (e.g. wok burner
and electric cooktop), and they have
different minimum safety distances,
always observe the greater
distance.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS
Safety distances to the sides
of the appliance
The appliance should only be installed
as shown in the illustrations, while
maintaining the required safety
distances shown. Do not install the
appliance between two tall cabinets,
this is a fire hazard.
not allowed
a1 5/8"" (40 mm) minimum distance
from the countertop cut-out to the
rear edge of countertop or wall.
b2" (50 mm) minimum distance from
the right of the countertop cut-out to
the closest adjacent piece of
furniture (for instance, a high
cabinet) or a room wall.
recommended
c4" (100 mm) minimum distance from
the left of the countertop cut-out to
the closest adjacent piece of
furniture (for instance, a high
cabinet) or a room wall.
not recommended
not recommended
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Safety distance from the wall covering
If a wall covering is installed, a minimum safety distance must be maintained
between the countertop cut-out and the covering, since high temperatures can
damage these materials.
If the covering is made of a combustible material (such as wood), the distance
between the countertop cut-out and the wall covering must be a minimum of
2" (50 mm).
For coverings made of non-combustible materials (such as metal, marble, granite
or ceramic tiles) the minimum safety distance e between the countertop cut-out
and the wall covering must be 2" (50 mm) minus the thickness of the covering.
For example: thickness of wall covering 9/16" (15 mm)
2" (50 mm) - 9/16" (15 mm) = minimum safety distance 1 3/8" (35 mm).
Cooktops flush with the countertop
Frame/Facet cooktops
aWall frame
bWall covering
x = thickness of the wall covering
cCountertop
dCountertop cut-out
eMinimum safety distance
with flammable materials 2" (50 mm)
with non-flammable materials 2" (50 mm) minus x
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Frame/Facet Cooktops
Sealing
Tiled surfaces
The grouting a and shaded area under
the appliance frame must be flat and
even so that the frame will lie evenly
and the sealing strip under the edge of
the upper part of the appliance can
provide an adequate seal against the
countertop.
The appliance must not be permanently
sealed into the countertop when
installed. The sealing strip under the
edge of the appliance provides a
sufficient seal for the countertop.
If the appliance is sealed into
position, the countertop or appliance
could be damaged if it needs to be
removed for maintenance or service.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation dimensions
aSpring clips
bFront
cInstallation height
dConnecting cable, Length = 56 11/16" (1440 mm)
eRating label
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Wood or solid surface countertop
The exact positions of the spring
clamps and the support bars (for
beveled cooktops only) are shown in
the "Installation dimensions" of each
unit.
^ Seal the cut surfaces with a suitable
sealant to avoid swelling caused by
moisture.
The materials used must be heat
resistant.
Facet cooktops:
Ensure that these materials do not
get on the top surface of the
countertop panels.
A special sealing strip ensures the
slip-proof seating of the cooktop in
the cutout. The gap between the
frame and the countertop will narrow
after a little time has passed.
^ Create the countertop cutout as
shown in the "Installation
dimensions". Observe the safety
distances (see "Installation Safety
Instructions").
^ Position the spring clips and the
securing strips (supplied with the
appliance; only for facet cooktops)
on the top edge of the cut-out
^ Attach the spring clips a and the
securing strips b with the
3.5 x 25 mm wood screws (supplied).
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Granite countertop
Strong double-sided adhesive tape
and silicon are required for
installation (not included).
^ Coat the lateral edges and the lower
edge of the spring clips and securing
strips with silicon.
^ Using adhesive tape c attach the
spring clips and the securing strips
(for facet cooktops only)
The spring clips and the securing
strips must be on or flush with the
top edge of the cooktop.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Insert the cooktop
^ Feed the power cord down through
the cut-out.
^ Place the cooktop lightly on the
spring clips.
^ With a hand on each side of the
appliance press down evenly on the
edges until it clicks into position.
When doing so make sure that the
appliance seal sits tightly on the
countertop to ensure it is sealed
correctly. This is important to ensure
an effective seal. Do not permanently
seal into the countertop.
If during installation the seal around
the frame does not sit flush with the
countertop in the corners, the corner
radius, maximum 3/16" (4 mm), can be
carefully filed down to fit.
^ Connect the appliance to the main
power supply (see "Electrical
connection").
^ Turn the appliance on and check the
function.
The appliance may be lifted out
using a special tool.
The appliance can also be pushed
up and out from underneath.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Power supply
,CAUTION: Before installation or
servicing, disconnect the power
supply by either removing the fuse,
shutting off the main power or
manually "tripping" the circuit
breaker.
^ Be sure your electrical supply
matches the data plate.
The rating label is located on the
underside of the appliance.
The appliance is equipped with a
flexible metal conduit encasing 3 wires
ready for connection to a grounded
power supply.
Installation work and repairs should
only be performed by a qualified
technician in accordance with all
applicable codes and standards.
Repairs and service by unqualified
persons could be dangerous and
the manufacturer will not be held
responsible.
It must be connected to a dedicated
line through the use of an approved
junction box.
A disconnection incorporated in the
fixed wiring must be provided. There
must be an all-pole contact gap of at
least 3 mm in the isolator switch
Before connecting the appliance to
the power supply, make sure that
the voltage and frequency listed on
the rating label correspond with the
household electrical supply. This
data must correspond to prevent
appliance damage. Consult an
electrician if in doubt.
(including switch, fuses and relays).
Black wire: connect to L1 (hot)
Red wire: connect to L2 (hot)
Green wire: connect to GND (ground)
208/240 V, 60 Hz, 30 A fuse rating.
Be sure the power outlet is accessible
after installation.
Only operate the appliance after it
has been installed into the
countertop.
For further information, see the wiring
diagram provided with the appliance.
, WARNING:
Installer:
Please leave these instructions with
the consumer.
THIS APPLIANCE MUST BE
GROUNDED!
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Help protect our environment
Disposal of packing materials
Disposal of an old appliance
The cardboard box and packing
materials are biodegradable and
recyclable. Please recycle.
Old appliances contain materials that
can be recycled. Please contact your
local recycling authority about the
possibility of recycling these materials.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
Before discarding an old appliance
disconnect it from the electrical supply
and cut off the power cord to prevent it
from becoming a hazard.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved / 4210
M.-Nr. 07 844 700 / 01
INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST
CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
Download from Www.Somanuals.com. All Manuals Search And Download.
|