®
30" Freestanding and Slide-In Electric Range
PRODUCT MODEL NUMBERS
OVERALL DIMENSIONS
KERA807P
KERK807P
KESA907P
KESI901P
KESV908P
B
B
A
Electrical: When a 4-wire or 3-wire, single
phase 120/240 volt, 60 Hz, AC only electrical
supply is available, a 50-amp maximum circuit
protection is required (or, if specified on the
model/serial rating plate, when a 4-wire or 3-wire
single phase 120/208 volt 60 Hz, AC only
electrical supply is available, a 40-amp maximum
circuit protection is required), fused on both
sides of the line. A time-delay fuse or circuit
breaker is recommended. The model/serial rating
plate is located on the oven frame behind the
storage drawer panel.
E
A
C
D
E
C
D
F
A. 35⁵⁄₈" (90.5 cm)
cooktop height with
leveling legs lowered
1¹⁄₂ turns
C. 30" (76.2 cm)
D. 27" 968.6 cm)*
E. 23¹⁄₂" (59.8 cm)
A. 7⁷⁄₈" (20 cm)
B. 30" (76.2 cm)
C. 43⁷⁄₈" (111.4 cm)
overall height
D. 36" (91.4 cm) cooktop
height with leveling legs
lowered 1¹⁄₂ turns
E. 30" (76.2 cm)
F. 27" (68,6 cm) to handle*
B. 30 ¹¹⁄₁₆" (77.9 cm)
*When installed in a 24" (61 cm) base cabinet with 25" (63.5 cm) countertop; front of oven door protrudes 1⁷⁄₈" (4.8 cm) beyond
24" (61 cm) base cabinet.
CABINET OPENING DIMENSIONS
C
D
E
E
C
D
B
F
B
H
F
G
I
A
A
G
J
H
A. 4" (10.2 cm) min. clearance
F. 22³⁄₄" (57.8 cm) opening depth
A. 4" (10.2 cm) min. clearance
from both sides of range to
E. For minimum clearance to
the top of the cooktop,
from both sides of range to
G. 30" (76.2 cm) min. opening
side wall or other
side wall or other combustible
see NOTE*.
width
combustible material
material
F. 30" (76.2 cm) min. opening
H. ¹⁄₄" (6.2 cm) radius both corners
width
B. 18" (45.7 cm) upper cabinet
B. 18" (45.7 cm) upper cabinet to
I. Junction box - 8" (20.3 cm) to
to countertop
countertop
G. Junction box - 8" (20.3 cm)
22" (55.9 cm) from either
C. 13" (33 cm) max. upper
C. 13" (33 cm) max. upper cabinet
to 22" (55.9 cm) from either
cabinet, 7" (17.8 cm) max. from
cabinet, 7" (17.8 cm) max.
cabinet depth
depth
door
from door
D. 30" (76.2 cm) min. opening
D. 30" (76.2 cm) min. opening
J. ⁷⁄₈" (2.2 cm) min. required
width
width
H. ⁷⁄₈" (2.2 cm) min. required
between cutout and cabinet
between cutout and cabinet
door or hinge
door or hinge
E. For minimum clearance to
the top of the cooktop,
see NOTE*.
*NOTE: 24" (61 cm) minimum when bottom of wood or metal cabinet is protected by not less than ¹⁄₄" (0.64 cm) flame retardant
millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or
0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.
If installing a hood above the range, follow the instructions for dimensional clearances above the cooktop surface.
Because Whirlpool Corporation policy includes a continuous commitment to improve our
products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. 9762035
06-28-05
Download from Www.Somanuals.com. All Manuals Search And Download.
|