Intel Computer Hardware SB 6862 User Manual

Technical Reference  
SB-6862  
Dual Pentium® Pro Single Board Computer  
with Natoma Chipset  
1641 McGaw Avenue  
Irvine, California 92614  
SB-6862  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features  
Intel Pentium® Pro processor, upgradeable through 180 or  
200 MHz; and dual Pentium® Pro upgrade  
Intel Natoma chipset  
Basic connectors provided for speakers, hard disk LED,  
reset/turbo LED, keylock, PS/2 mouse and CMOS  
battery  
System memory upgradeable to 1 GB using ‘x 64’ or  
‘x 72’ dual inline memory modules (DIMM)  
Processor facilitated error correcting memory (ECC)  
using ‘x 72’ DIMM  
Processor-based cache: 256 KB or 512 KB on-board  
On-board E-IDE controller with seperate master/slave  
IDE mode support for up to 4 IDE drives and support for  
up to 2 floppy drives  
On-board I/O: 2 serial, 2 universal serial bus (USB) and  
1 parallel ports  
PS/2 keyboard mini-DIN connector; extra on-board PS/2  
mouse connector  
SB-6862  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCC Standards  
The FCC (Federal Communications Commission) restricts  
the amount of radiation and radio frequency emissions  
coming from computing equipment.  
Note: This equipment has been tested and found to comply  
with the limits for a Class B digital device pursuant to Part  
15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses, and  
can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference  
to radioor television reception, which can be determined by  
turning the equipment off and on, the use is encouraged to try  
to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician  
for help.  
CSS Labs is not responsible for any radio or television  
interference caused by unauthorized modifications to this  
equipment. Operation with non-certified peripherals is likely  
to result in interference to radio and TV reception.  
iv  
SB-6862  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To ensure compliance to FCC non-interference regulations,  
peripherals attached to this device require shielded I/O cables.  
NOTICE: The use of a non-shielded I/O cable with this  
device is in violation of U.S. Federal law and will not allow  
the device to meet the maximum emission limits.  
CAUTION: Any changes or modifications not expressly  
approved by the grantee of this device could void the user’s  
authority to operate the equipment.  
Note: If you have purchased the miniature tower system,  
please note the following...  
WARNING: The system is to be installed on desk or table  
tops only. The unit will become unstable if operated as a floor  
standing unit and unintentional force is applied to the top of  
the unit.  
Turn the unit off and unplug the power cord before you  
open the cover to install any cards or peripheral devices.  
SB-6862  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING  
CAUTION: THERE IS A DANGER OF EXPLOSION IF  
THE BATTERY IS INCORRECTLY REPLACED.  
REPLACE ONLY WITH THE SAME OR EQUIVALENT  
TYPE RECOMMENDED BY THE MANUFACTURER.  
DISCARD USED BATTERIES ACCORDING TO THE  
MANUFACTURER’S INSTRUCTIONS.  
ATTENTION:IL Y A DANGER D’EXPLOSION S’IL Y A  
REMPLACEMENT INCORRECT DE LA BATTERRIE.  
REMPLACER UNIQUEMENT AVEC UNE BATTERI DU  
MEME TYPE OU D’UN TYPE RECOMMENDE PAR LE  
CONSTRUCTEUR. ETTERAU REBUT LES  
BATTERRIES USAGEES CONFORMEMANT AUX  
INSTRUCTIONS DU FABRICATANT.  
vi  
SB-6862  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTICE  
The information within this manual is subject to change  
without notice.  
CSS Laboratories, Incorporated shall not be held liable for  
technical or editorial errors or omissions contained in herein;  
nor for incidental or consequential damages resulting from the  
furnishing, performance or use of this material.  
All rights reserved. No part of this publication may be  
reproduced, stored in a retrieval system, or transmitted, in  
any form or by any means, mechanical, photocopying,  
recording or otherwise, without the prior written permission  
of CSS Laboratories, Inc.  
Product names mentioned herein are for identification  
purposes only, and may be trademarks and/or registered  
trademarks of their respective companies.  
© 1997 CSS Laboratories, Inc. All rights reserved.  
P/N MS-SBC-6862-DOC Revision 1 August, 1997  
SB-6862  
vii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
viii  
SB-6862  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Overview ............................................................................... 1  
The Microprocessor .............................................................. 2  
The Board ............................................................................. 3  
Voltage Regulator..................................................... 4  
Board Connectors ................................................................. 5  
Keyboard Connector K1 ......................................... 5  
Primary IDE Drive Header J11............................... 5  
Secondary IDE Drive Header J12........................... 6  
Parallel Port DB1 ................................................... 6  
Serial Port 1 Connector J98 .................................... 6  
Serial Port 2 Connector J97 .................................... 6  
Floppy Drive Connector J8 ..................................... 6  
Universal Serial Bus Connectors J3, J4 .................. 6  
Fan Connectors JP18, JP45 .................................... 7  
Jumpers ................................................................................. 8  
Processor Bus Clock Speed JP4, JP3 ..................... 8  
Processor Bus Frequency JP26, JP27 .................... 9  
Processor Speed Ratio JP32, JP31, JP30, JP29.... 10  
System Memory ...................................................................11  
Installing and Removing DIMM ..........................................11  
System Memory Configuration ........................................... 12  
System Memory Map.......................................................... 15  
Timers...................................................................15  
System Interrupts ................................................................ 16  
Direct Memory Access........................................................ 17  
The I/O Address Map ......................................................... 18  
Configuration Utilities ........................................................ 19  
Overview ................................................................ 19  
Standard Setup....................................................... 21  
Advanced Setup ..................................................... 22  
Advanced Chipset Setup ........................................ 23  
Power Management Setup ..................................... 24  
PCI/PnP Setup ....................................................... 25  
Peripheral Setup..................................................... 26  
SB-6862  
ix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
x
SB-6862  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Overview  
This document describes the technical features of the  
board. The topics include:  
The Microprocessor - description of the features of  
the Pentium® Pro microprocessor  
Board - illustration and brief description of the  
board  
Connectors - description of connector locations and  
functions on the board  
Jumpers - detailed description of the jumpers used  
to the board  
System Memory - detailed description of system  
memory how to add memory  
System Memory Map - listing of traditional address  
assignments for system memory  
Configuration Utilities - a description and  
instructions for the board’s BIOS  
SB-6862  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Microprocessor  
The PentiumPro microprocessor contains all the features  
of the Pentium and 80486 processors, and is 100%  
compatible with 8086/88, 80286, and 80386 DX and SX  
microprocessors. In addition, the Pentium features:  
64-bit Data Bus  
Superscalar Architecture  
Capability for executing two instructions in parallel  
Pipelined Floating-Point Unit  
Separate 8 KB Code and 8 KB Data Caches (total 16  
L1 cache)  
256 KB or 512 KB internal L2 cache  
Bus Cycle Pipelining  
Writeback MESI Protocol in the Data Cache  
Internal Parity Checking  
It is available in a variety of speeds, from 180 MHz through  
200 MHz.  
For additional information, talk to your authorized CSS  
Laboratories representative.  
2
SB-6862  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Board  
VOLTAGE  
REGULATORS  
JP29  
JP30  
JP31  
JP32  
JP45  
U60  
U59  
U58  
U57  
DIMM 1  
DIMM 2  
DIMM 3  
DIMM 4  
Figure 1: The Board  
SB-6862  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Voltage Regulator Module  
A voltage regulator module installed on the board ensures  
that the correct voltage is provided to the particular processor  
installed.  
When up grading to the faster grade of Pentium processor,  
make sure to have the appropriate voltage regulator installed.  
4
SB-6862  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Board Connectors  
Connector  
Description  
K1  
Keyboard  
J3, J4  
J8  
J11  
J12  
J98  
Universal Serial Bus (USB)  
Floppy drive  
Primary IDE  
Secondary IDE  
Serial 1  
J97  
Serial 2  
DB1  
JP18, JP45  
Parallel  
12 volt CPU fans  
Keyboard Connector K1  
Keyboard plugs are keyed for proper installation.  
Pin Assignment  
Pin Assignment  
1
2
3
Clock  
4
5
Ground  
+5 Vdc  
Data  
Not used  
Primary IDE Drive Header J11  
J11 is the connector for the primary on-board PCI IDE  
drive controller. Pin 1 is marked. When connecting your  
hard drive, orient the cable’s pin one with pin 1 of J11.  
SB-6862  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Secondary IDE Drive Header J12  
J10 is the connector for the secondary on-board PCI IDE  
hard drive controller. Pin 1 is marked. Use this to cable  
your IDE hard drive. When connecting your hard drive,  
orient the ribbon’s pin one with pin 1 of J71.  
Parallel Port DB1  
DB1 provides the connection for the boards parallel port.  
Serial Port 1 Connector J98  
J98 provides the connection for serial port 1 (COM 1).  
Serial Port 2 Connector J97  
J97 provides the connection for the board’s serial port 2  
(COM 2).  
Floppy Drive Connector J8  
J8 connects the floppy drive to the controller provided on  
the board.  
Universal Serial Bus Connectors J3, J4  
The motherboard provides two 4-pin universal serial bus  
(USB) connectors.  
6
SB-6862  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fan Connectors JP18, JP45  
These fans provide cooling for the powerful Pentium Pro  
processors. JP45 connects to the primary processor’s fan.  
JP18 connects to the dual processor fan.  
Pin Assignment  
1
2
12 volt  
Ground  
SB-6862  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Jumpers  
The boards jumpers are pre-configured at the factory.  
Read the following section carefully, before configuring  
your system.  
The board has the following jumpers:  
Jumper  
JP4  
Description  
Processor bus clock speed  
Processor bus frequency  
Processor speed ratio  
JP26, JP27  
JP32, JP31  
JP30, JP29  
JP69, JP24  
JP1, JP2, J70  
Test pins (jumper closed)  
Test pins (jumper open)  
J47, JP47, JP46  
Processor Bus Clock Speed JP4, JP3  
Pentium Pro processors are designed with one of two bus  
clock speeds. The bus clock speed is always a fraction of  
the processor’s internal speed.  
Bus Clock  
Speed  
JP4  
JP3  
60 MHz  
66 MHz  
IN  
OUT  
IN  
OUT  
8
SB-6862  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Processor Bus Frequency JP26, JP27  
JP26 and JP27 synchronize the processor bus frequency with  
the processor’s speed.  
Processor Bus JP26  
Frequency  
JP27  
60 MHz  
66 MHz  
IN  
OUT  
IN  
OUT  
Processor Speed Ratio JP32, JP31, JP30, JP29  
The PentiumPro uses a clock multiplier to run at a  
speed faster than the processor bus.  
These jumpers match the installed processor’s speed with  
single board computer’s defined processor speed.  
When upgrading processors, you may need to adjust these  
jumpers.  
Processor  
JP32 JP31 JP30 JP29  
Speed Ratio  
2x  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
2.5x  
3x  
OFF  
OFF ON  
4x  
OFF ON  
OFF ON  
ON  
4.5x  
OFF  
SB-6862  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
The following table matches processor speed, processor clock  
and the boards processor bus speed:  
Processor  
Type/Speed  
Clock Ratio  
Processor  
Bus Speed  
180 MHz  
200 MHz  
3x  
3x  
60 MHz  
66 MHz  
10  
SB-6862  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Memory  
There are a total of four banks available for memory  
upgrades. The board supports DIMM in the following  
combinations:  
1M x 64/72  
2M x 64/72  
4M x 64/72  
8M x 64/72  
= 8 MB/bank  
= 16 MB/bank  
= 32 MB/bank  
= 64 MB/bank  
16M x 64/72 = 128 MB/bank  
32M x 64/72 = 256 MB/bank  
Installing and Removing DIMM  
Read these instructions completely before installing or  
removing DIMMs. The DIMM is held by plastic press-clips  
on both sides of the slot.  
Installing DIMM  
1) Hold the DIMM so that the gold tab is pointing toward the  
slot. The DIMM is keyed so that it will only snap into the  
slot when positioned correctly.  
2) Press one end of the DIMM until it inserts and its press-  
clip snaps into place.  
3) Press the other end of the DIMM until it inserts and its  
press-clip snaps into place.  
Removing DIMM  
1) Pull both press-clips simultaneously, until the DIMM pops  
up from its slot.  
SB-6862  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Memory Configuration  
RAM  
8 MB  
Bank 0  
Bank 1  
Bank 2  
Bank 3  
1M x 64/72  
16 MB 1M x 64/72  
16 MB 2M x 64/72  
24 MB 1M x 64/72  
24 MB 1M x 64/72  
32 MB 1M x 64/72  
32 MB 2M x 64/72  
32 MB 4M x 64/72  
32 MB 2M x 64/72  
32 MB 2M x 64/72  
40 MB 1M x 64/72  
40 MB 1M x 64/72  
40 MB 2M x 64/72  
48 MB 4M x 64/72  
48 MB 2M x 64/72  
48 MB 2M x 64/72  
48 MB 4M x 64/72  
48 MB 4M x 64/72  
56 MB 1M x 64/72  
56 MB 4M x 64/72  
64 MB 2M x 64/72  
64 MB 8M x 64/72  
64 MB 4M x 64/72  
64 MB 4M x 64/72  
64 MB 4M x 64/72  
72 MB 8M x 64/72  
72 MB 1M x 64/72  
80 MB 2M x 64/72  
80 MB 2M x 64/72  
80 MB 4M x 64/72  
80 MB 8M x 64/72  
1M x 64/72  
1M x 64/72  
2M x 64/72  
1M x 64/72  
2M x 64/72  
1M x 64/72  
1M x 64/72 1M x 64/72  
1M x 64/72  
2M x 64/72  
2M x 64/72  
4M x 64/72  
1M x 64/72  
1M x 64/72  
2M x 64/72  
4M x 64/72  
1M x 64/72  
2M x 64/72  
2M x 64/72  
1M x 64/72  
2M x 64/72  
1M x 64/72  
2M x 64/72  
1M x 64/72 1M x 64/72  
1M x 64/72  
2M x 64/72  
1M x 64/72  
2M x 64/72 2M x 64/72  
1M x 64/72 1M x 64/72  
2M x 64/72 2M x 64/72  
4M x 64/72  
2M x 64/72  
4M x 64/72  
1M x 64/72  
4M x 64/72  
8M x 64/72  
4M x 64/72  
2M x 64/72  
1M x 64/72  
2M x 64/72  
4M x 64/72  
4M x 64/72  
2M x 64/72 2M x 64/72  
1M x 64/72  
12  
SB-6862  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RAM  
Bank 0  
Bank 1  
Bank 2  
Bank 3  
88 MB 8M x 64/72  
96 MB 4M x 64/72  
96 MB 4M x 64/72  
104 MB 1M x 64/72  
112 MB 2M x 64/72  
128 MB 4M x 64/72  
128 MB 8M x 64/72  
128 MB 16M x 64/72  
1M x 64/72  
4M x 64/72  
8M x 64/72  
4M x 64/72  
4M x 64/72  
4M x 64/72  
8M x 64/72  
1M x 64/72 1M x 64/72  
4M x 64/72  
4M x 64/72 4M x 64/72  
4M x 64/72 4M x 64/72  
4M x 64/72 4M x 64/72  
136 MB 16M x 64/72 1M x 64/72  
136 MB 1M x 64/72  
144 MB 2M x 64/72  
144 MB 2M x 64/72  
8M x 64/72  
16M x 64/72  
8M x 64/72  
8M x 64/72  
8M x 64/72  
144 MB 16M x 64/72 1M x 64/72  
152 MB 16M x 64/72 1M x 64/72  
160 MB 16M x 64/72 2M x 64/72  
160 MB 16M x 64/72 4M x 64/72  
1M x 64/72  
1M x 64/72 1M x 64/72  
2M x 64/72  
160 MB 4M x 64/72  
176 MB 16M x 64/72 2M x 64/72  
192 MB 8M x 64/72 8M x 64/72  
8M x 64/72  
8M x 64/72  
2M x 64/72 2M x 64/72  
8M x 64/72  
192 MB 16M x 64/72 4M x 64/72  
192 MB 16M x 64/72 8M x 64/72  
4M x 64/72  
200 MB 1M x 64/72  
208 MB 2M x 64/72  
224 MB 4M x 64/72  
224 MB 16M x 64/7  
256 MB 8M x 64/72  
8M x 64/72  
8M x 64/72  
8M x 64/72  
24M x 64/7  
8M x 64/72  
8M x 64/72 8M x 64/72  
8M x 64/72 8M x 64/72  
8M x 64/72 8M x 64/72  
24M x 64/72 4M x 64/72  
8M x 64/72 8M x 64/72  
256 MB 16M x 64/72 16M x 64/72  
256 MB 32M x 64/72  
256 MB 16M x 64/72 8M x 64/72  
256 MB 16M x 64/72 16M x 64/72  
264 MB 32M x 64/72 1M x 64/72  
8M x 64/72  
264 MB 1M x 64/72  
16M x 64/72 16M x 64/72  
SB-6862  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RAM  
Bank 0  
Bank 1  
Bank 2  
Bank 3  
272 MB 32M x 64/72 1M x 64/72  
272 MB 32M x 64/72 2M x 64/72  
1M x 64/72  
272 MB 2M x 64/72  
16M x 64/72 16M x 64/72  
280 MB 32M x 64/72 1M x 64/72  
288 MB 32M x 64/72 4M x 64/72  
288 MB 32M x 64/72 2M x 64/72  
1M x 64/72 1M x 64/72  
2M x 64/72  
288 MB 4M x 64/72  
16M x 64/72 16M x 64/72  
304 MB 32M x 64/72 2M x 64/72  
320 MB 32M x 64/72 4M x 64/72  
320 MB 16M x 64/72 8M x 64/72  
320 MB 32M x 64/72 8M x 64/72  
352 MB 32M x 64/72 4M x 64/72  
2M x 64/72 2M x 64/72  
4M x 64/72  
8M x 64/72 8M x 64/72  
4M x 64/72 4M x 64/72  
384 MB 16M x 64/72 16M x 64/72 16M x 64/72  
384 MB 16M x 64/72 32M x 64/72  
384 MB 32M x 64/72 8M x 64/72  
8M x 64/72  
392 MB 1M x 64/72  
400 MB 2M x 64/72  
416 MB 4M x 64/72  
16M x 64/72 16M x 64/72 16M x 64/72  
16M x 64/72 16M x 64/72 16M x 64/72  
16M x 64/72 16M x 64/72 16M x 64/72  
448 MB 32M x 64/72 8M x 64/72  
8M x 64/72 8M x 64/72  
512 MB 16M x 64/72 16M x 64/72 16M x 64/72 16M x 64/72  
512 MB 32M x 64/72 32M x 64/72  
512 MB 32M x 64/72 16M x 64/72 16M x 64/72  
520 MB 1M x 64/72  
528 MB 2M x 64/72  
544 MB 4M x 64/72  
32M x 64/72 32M x 64/72  
32M x 64/72 32M x 64/72  
32M x 64/72 32M x 64/72  
640 MB 16M x 64/72 32M x 64/72 32M x 64/72  
640 MB 32M x 64/72 16M x 64/72 16M x 64/72 16M x 64/72  
768 MB 32M x 64/72 32M x 64/72 32M x 64/72  
776 MB 1M x 64/72  
784 MB 2M x 64/72  
800 MB 4M x 64/72  
32M x 64/72 32M x 64/72 32M x 64/72  
32M x 64/72 32M x 64/72 32M x 64/72  
32M x 64/72 32M x 64/72 32M x 64/72  
896 MB 16M x 64/72 32M x 64/72 32M x 64/72 32M x 64/72  
1 GB  
32M x 64/72 32M x 64/72 32M x 64/72 32M x 64/72  
14  
SB-6862  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Memory Map  
Address (hex) Name  
Function  
000000 to  
9FFFFF  
640 KB motherboard  
system memory  
0A0000 to  
0BFFFF  
128 KB video display reserved for graphics  
ROM  
0C0000 to  
0DFFFF  
128 KB I/O  
expansion ROM  
reserved for ROM on  
I/O  
0E0000 to  
0EFFFF  
64 KB reserved on  
motherboard  
duplicate code  
assignment at FE0000  
0F0000 to  
0FFFFF  
64 KB ROM on  
motherbord  
duplicate code  
assignment at FF0000  
100000 to  
FDFFFF  
maximum memory is I/O channel memory  
15 MB  
FE0000 to  
FEFFFF  
64 KB reserved on  
motherboard  
duplicate code  
assignment at 0E0000  
FF0000 to  
FFFFFF  
64 KB reserved on  
motherboard  
duplicate code  
assignment at 0F0000  
Timers  
The system has three programmable timers/counters  
controlled by timer/counter chips and defined as channels 0  
through 2 as follows:  
Channel 0:  
Channel 1:  
Channel 3:  
System Timer  
Refresh Request Generator  
Tone Generation for Speaker  
SB-6862  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Interrupts  
The processor has two controllers, supplying 16 IRQs.  
Below are assignments in decreasing priority.  
LEVEL  
FUNCTION  
Microprocessor NMI  
Parity or I/O Channel Check  
Interrupt Controllers  
Ctlr 1 Ctlr 2  
IRQ0  
IRQ1  
IRQ2  
*Interrupts IRQ8 - IRQ15 redirected to IRQ2*  
IRQ8  
Real-Time clock interrupt  
Software re-directed to INT + AH (IRQ2)  
Reserved  
IRQ9  
IRQ10  
IRQ11  
IRQ12  
IRQ13  
IRQ14  
IRQ15  
Reserved  
Reserved  
Coprocessor  
Fixed disk controller  
Reserved  
IRQ3  
IRQ4  
IRQ5  
IRQ6  
IRQ7  
Serial port 2  
Serial port 1  
Parallel port2  
Diskette controller  
Parallel port 1  
16  
SB-6862  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: IRQ9, IRQ10, IRQ11, IRQ12, IRQ15, IRQ3, IRQ4,  
IRQ5 and IRQ7 can be redirected to PCI add-in boards.  
The PCI standard has a 4-IRQ limitation. Some PCI add-in  
boards do not require IRQs. Some can share an IRQ with  
another board of the same model and manufacture. Check the  
add-in board’s docmentation for IRQ information.  
Direct Memory Access  
The system supports seven DMA channels:  
Controller 1  
Controller 2  
Channel 0 - Spare  
Channel 4 - Cascade  
for Controller 1  
Channel 1 - SDLC  
Channel 2 - Diskette  
Channel 3 - Spare  
Channel 5 - Spare  
Channel 6 - Spare  
Channel 7 - Spare  
The first DMA controller holds channels 0 through 3. These  
channels support 8-bit data transfers between 8-bit I/O  
adapters and 8- or 16-bit system memory. Each channel can  
transfer data in 4 KB blocks.  
The second DMA controller holds channels 4 through 7.  
Channel 4 cascades channels 0 through 3 to the  
microprocessor. Channel 5, 6 and 7 support 16-bit data  
transfers between 16-bit I/O adapters and 16-bit system  
memory. These DMA channels can transfer data throughout  
the 16 MB system-address space in 128 KB blocks.  
Channel 5, 6 and 7 cannot transfer data on odd byte  
boundaries.  
SB-6862  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The I/O Address Map  
Address (hex)  
Function  
000-01F  
020-03F  
040-05F  
060-06F  
070-07F  
080-09F  
0A0-OBF  
0C0-ODF  
0F0-0F1  
0F8-0FF  
1F0-1F8  
200-207  
278-27F  
2F8-2FF  
300-31F  
378-37F  
380-38F  
3A0-3AF  
3B0-3BF  
3D0-3DF  
3F0-3F7  
3F8-3FF  
DMA #1  
INTR #1  
Timer  
Keyboard  
NMI mask register  
DMA page register  
INTR #2  
DMA #2  
Clr/rst math coprocessor  
Math coprocessor  
Fixed disk  
Joystick  
Secondary parallel port  
Secondary serial port  
Prototype card  
Primary parallel port  
SDLC (secondary bisynchronous)  
Primary bisynchronous  
Monochrome display/printer adapter  
Color/graphics monitor adapter  
Diskette controller  
Primary serial port  
18  
SB-6862  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuration Utilities  
Overview  
The BIOS Setup utility stores your system’s configuration.  
The utility described below provides a bridge to PCI slots in  
excess of the four allowed by current standards.  
When your system “boots”, it’s configuration is read into  
main memory. Hard drives, floppy drives, video adapter,  
memory and keyboard are described to the system.  
The BIOS is pre-configured at the factory. This document is  
an overview of the BIOS.  
To start the program, press the <Delete> key while the  
system is booting. The Utilities menu screen will display:  
AMI HIFLEX SETUP UTILITY - VERSION 1.13  
(c) 1996 American Megatrends, Inc. All Rights Reserved  
Standard CMOS Setup  
Advanced CMOS Setup  
Advanced Chipset Setup  
Power Management Setup  
PCI/Plug and Play Setup  
Peripheral Setup  
Auto Detect Hard Disk  
Change User Password  
Change Supervisor Password  
Change Language Setting  
Auto Configuration with Optional Settings  
Auto Configuration with Fail Safe Settings  
Save Settings and Exit  
Exit Without Saving  
Figure 10: The Main Menu  
SB-6862  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The most commonly accessed selections are Standard CMOS  
Setup, Advanced CMOS Setup, Advanced Chipset Setup,  
Power Management Setup PCI/Plug and Play Setup, and  
Peripheral Setup.  
Standard Setup  
This utility allows you to record your system setup.  
To start SETUP, Double-click on the Standard Setup icon  
on the Main Menu. Alter only the items that need to be  
changed or reset. If a selected option is correct, skip the  
corresponding step.  
AMI BIOS SETUP - STANDARD CMOS SETUP  
(c) 1996 American Megatrends, Inc. All Rights Reserved  
Date (mm/dd/yy)  
Time (hh/mm/ss)  
: Friday, March 3, 1997Base Memory  
640 KB  
: 11:11:00 Extd Memory  
: 15 MB  
Floppy Drive A  
Floppy Drive B  
: 1.44 MB 3 1/2  
: Not Installed  
LBA Blk PIO  
Type Size Cyln Head WPcom Sec Mode Mode Mode Mode  
Pri Master Auto  
32bit  
Pri Slave Auto  
Sec Master Auto  
Sec Slave Auto  
Boot Sector Virus Protection  
Disabled  
Month:  
Day :  
Year :  
Jan - Dec  
01 - 31  
1901 - 2099  
Esc: Exit  
PgUp/PgDn : Modify  
F2/F3 : Color  
: Sel  
Figure 11: The Standard Setup Menu  
Pri Master Primary master IDE/PCI hard drive. Define  
the parameters of your hard disk and modes. The default  
setting is Auto, to auto-detect drive type.  
20  
SB-6862  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pri Slave Primary slave IDE/PCI hard drive. Define the  
parameters of your hard disk and modes. The default  
setting is Auto, to auto-detect drive type.  
Sec Master Secondary master IDE/PCI hard drive, if  
installed. Define the parameters of your hard disk and  
modes. The default setting is Not Installed.  
Sec Slave Secondary slave IDE/PCI hard drive, if installed.  
Define the parameters of your hard disk and modes. The  
default setting is Not Installed.  
Note: You may also manually enter the hard disk  
parameters. Two helpful tables appear at the end of this  
section. One describes drive parameters, and the other is a list  
of various hard drive parameters.  
Floppy Drive A:/Floppy Drive B Select the type that  
matches the drive installed. Scroll through the fields using the  
up and down arrows. You may select from the following:  
5.25”  
3.5”  
360 KB  
1.2 MB  
720 KB  
1.44 MB  
2.88 MB  
Date/Time Enter new values through the keyboard.  
Use the arrow keys to toggle between items. Available options  
for the highlighted item are displayed on the right side of the  
menu. Press <PgUp> or <PgDn> to toggle through available  
options.  
SB-6862  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Setup  
Advanced Setup allows you to fine tune some of the special  
features. These features are pre-set for you at the factory.  
Double-click the Advanced Setup icon on the Main Menu.  
Use the arrow keys to toggle between items. Available options  
for the highlighted item are displayed on the right side of the  
menu. Press <PgUp> or <PgDn> to toggle through available  
options.  
AMI BIOS SETUP - ADVANCED CMOS SETUP  
(c) 1996 American Megatrends, Inc. All Rights Reserved  
Quick Boot  
Enabled  
IDE-0  
FLOPPY  
CDROM  
Yes  
Available Options:  
Disabled  
Enabled  
1st Boot Device  
2nd Boot Device  
3rd Boot Device  
Try Other Boot Devices  
Initial Display Mode  
BIOS  
Display Mode at Add-On ROM Init Force BIOS  
Floppy Access Control  
Hard Disk Access Control  
S.M.A.R.T. for Hard Disk  
Boot Up NumLock  
PS/2 Mouse Support  
Primary Display  
Read Write  
Read Write  
Disable  
On  
Enabled  
VGA/EGA  
Setup  
Password Check  
Boot to OS/2  
No  
CPU MicroCode Updation  
P6 Internal Cache  
System BIOS Cacheable  
C000, 16k Shadow  
C400, 16k Shadow  
Enabled  
Write Back  
Enabled  
Cached  
Cached  
Esc: Exit  
: Sel  
PgUp/PgDn : Modify  
F2/F3 : Color  
Figure 12: The Advanced Setup Menu  
22  
SB-6862  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Chipset Setup  
This option lets you configure some of the advanced features  
of your particular system through the chipset. It was pre-  
configured at the factory and need not be altered. Double-  
click on the Chipset Setup icon on the Main Menu.  
Use the arrow keys to toggle between items. Available options  
for the highlighted item are displayed on the right side of the  
menu. Press <PgUp> or <PgDn> to toggle through available  
options.  
AMI BIOS SETUP - ADVANCED CHIPSET SETUP  
(c) 1996 American Megatrends, Inc. All Rights Reserved  
USB Function  
USB KB/Mouse Legacy Support Disabled  
Disabled  
Available Options:  
Disabled  
USB Passive Release Enable  
DRAM Speed (ns)  
Disabled  
70  
Enabled  
DRAM Integrety Mode (ECC)  
DRAM Fast head off  
DRAM Refresh Type  
DRAM Refresh Queue  
DRAM ECC Mode  
VGA Frame Buffer USWC  
PCI Frame Buffer USWC  
Fixed Memory Hole  
Disabled  
Disabled  
CAS/RAS  
Enabled  
Disabled  
Disabled  
Disabled  
Disabled  
Enabled  
Disabled  
Enabled  
Enabled  
Enabled  
Disabled  
Disabled  
CPU to IDE Posting  
USWC Write Posting  
CPU to DRAM Pipeline  
PCI Burst Write Combine  
Read Around Write  
Deturbo Mode  
TypeF DMA Buffer Control 1  
Esc: Exit  
: Sel  
PgUp/PgDn : Modify  
F2/F3 : Color  
Figure 13: The Chipset Setup Menu  
SB-6862  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power Management Setup  
This utility lets you set the “green” functionality parameters.  
AMI BIOS SETUP - POWER MANAGEMENT SETUP  
(c) 1996 American Megatrends, Inc. All Rights Reserved  
Standard Power Management  
Advanced Power Mngmt (APM)  
Instant-On Timeout (minutes)  
Enabled  
Disabled  
N/A  
Available Options:  
Disabled  
Enabled  
Auxiliary Power Supply Timeout Disabled  
DPMS Video Power Supply Timeout Disabled  
Green PC Monitor Power State  
Hard Disk Power Down Mode  
Hard Disk Time Out (Minutes)  
Standby Time Out (Minutes)  
Suspend Time Out (Minutes)  
Slow Clock Ratio  
IRQ3  
Disabled  
Disabled  
Disabled  
Disabled  
Disabled  
1:1  
Ignore  
IRQ4  
Ignore  
IRQ5  
Ignore  
IRQ7  
Ignore  
IRQ9  
Ignore  
IRQ10  
IRQ11  
IRQ15  
Ignore  
Ignore  
Ignore  
Esc: Exit  
PgUp/PgDn : Modify  
F2/F3 : Color  
: Sel  
Figure 12: The Advanced Setup Menu  
Instant On Timer is a green mode timer letting you wake  
the system up as it is triggered.  
IRQ3, 4, 5, 7, 9, 10, 11, 12, 13, 14, 15 can be ignored or  
monitored. Monitored, IRQ activity wakes up the system.  
Use the arrow keys to toggle between items. Available options  
for the highlighted item are displayed on the right side of the  
menu. Press <PgUp> or <PgDn> to toggle through available  
options.  
24  
SB-6862  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PCI/PnP Setup  
This menu allows you to define attributes of the PCI bus  
portion of the motherboard.  
AMI BIOS SETUP - PLUG AND PLAY SETUP  
(c) 1996 American Megatrends, Inc. All Rights Reserved  
Plug and Play O/S  
No  
64  
Disabled  
Disabled  
Auto  
Available Options:  
Disabled  
Enabled  
PCI Latency Timer (PCI Clocks)  
PCI VGA Palette Snoop  
PCI IDE Bus Master  
OffBoard PCI IDE Card  
OffBoard PCI IDE Primary IRQ  
Disabled  
OffBoard PCI IDE Secondary IRQ Disabled  
DMA Channel 0  
DMA Channel 1  
DMA Channel 3  
DMA Channel 5  
DMA Channel 6  
DMA Channel 7  
IRQ3  
IRQ4  
IRQ5  
IRQ7  
IRQ9  
PnP  
PnP  
PnP’  
PnP  
PnP  
PnP  
PCI/PnP  
PCI/PnP  
PCI/PnP  
PCI/PnP  
PCI/PnP  
PCI/PnP  
PCI/PnP  
PCI/PnP  
IRQ10  
IRQ11  
IRQ15  
Esc: Exit  
PgUp/PgDn : Modify  
F2/F3 : Color  
: Sel  
Figure 15: The PCI/Plug and Play Setup Menu  
Use the arrow keys to toggle between items. Available options  
for the highlighted item are displayed on the right side of the  
menu. Press <PgUp> or <PgDn> to toggle through available  
options.  
SB-6862  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Peripheral Setup  
This menu allows you to specify the peripherals installed on  
your motherboard.  
On-board IDE enables the on-board chipset E-IDE function.  
Use the arrow keys to toggle between items. Press <Enter> to  
access the drop down selection menu.  
Use the arrow keys to toggle between options. Press <Enter>  
to make a selection.  
AMI BIOS SETUP - PERIPHERALS SETUP  
(c) 1996 American Megatrends, Inc. All Rights Reserved  
OnBoard FDC  
Auto  
Auto  
Auto  
Auto  
ECP  
3
Available Options:  
Disabled  
OnBoard Serial Port 1  
OnBoard Serial Port 2  
OnBoard Parallel Port  
Parallel Port Mode  
Parallel Port DMA Channel  
Parallel Port IRQ  
OnBoard IDE  
Enabled  
Esc: Exit  
: Sel  
Auto  
Both  
PgUp/PgDn : Modify  
F2/F3 : Color  
Figure 16: The Periperals Setup Menu  
26  
SB-6862  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SB-6862  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Dishwasher DI 620 User Manual
Inter Tel Server CS 5200 User Manual
Iomega Thermometer DP462 User Manual
JBL Car Speaker GT5 1202BP User Manual
Jensen Car Speaker JS652 User Manual
JVC Car Stereo System KW AVX810J User Manual
Kenmore Dishwasher 9743678 User Manual
KitchenAid Oven KEBC247KBL06 User Manual
KitchenAid Ventilation Hood W10029780 User Manual
Konica Minolta Hunting Equipment 7 15x35 User Manual