o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
DVD 7
HD720P & HD1080P OUTPUT DVD Player
NOTE: Before installing your new DVD 7 player, please read this manual carefully
as it will inform you of the product specifications, proper installation and correct
operating procedures for your unit. Also included in this manual are guidelines
on how to service and care for your new Cary Audio Design product.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture. The lightning
flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of un-insulated
dangerous voltage within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric
shock to persons.
CAUTION: To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside.
Please refer to qualified personnel for service.
ALERT: The exclamation point within an equilateral triangle is intended to alert the user of the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the component.
1. READ ALL INSTRUCTIONS: All the safety and operating instructions of your Cary Audio equipment should be read
before power is applied to the equipment.
2. RETAIN OWNER'S MANUAL: These safety and operating instructions should be retained for future reference.
3. HEED WARNING: All warnings on the unit and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS: All operating and use instructions should be followed.
5. CLEANING: Unplug the unit from the wall outlet before cleaning. The unit should be cleaned only as recommended
by the manufacturer.
6. ATTACHMENTS: Do not use attachments not recommended by the unit manufacturer as they may cause hazards.
7. WATER AND MOISTURE: Do not use the unit near water - for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub; in a wet basement; or near a swimming pool.
8. ACCESSORIES: Do not place the unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall,
causing serious injury to a child, an adult, or damage to the unit. Mounting of the unit should follow the
manufacturer's instructions and should use a mounting accessory recommended by the manufacturer.
9. VENTILATION: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the
unit and to protect it from overheating. These openings must not be blocked or covered. The top or bottom panel
openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. The unit should
not be installed in a built-in location such as a bookcase or rack unless proper ventilation is provided. There should
be free space of at least 6 inches (16cm) above the unit and an opening behind the unit.
10. GROUNDING OR POLARIZATION: The unit may be equipped with a polarized alternating current line plug (a
plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety
feature. If you cannot insert the plug fully into the outlet, try reversing the plug. If the plug should fail to fit, contact
a licensed electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
11. POWER SOURCES: The unit should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supplied to your home, consult your unit dealer or local power
company.
12. POWER CORD PROTECTION: Power supply cords should be routed so that they are unlikely to be walked on or
pinched by items placed on or against them. Pay close attention to cords where they enter a plug, or a convenience
receptacle, and the point where they exit from the unit.
13. OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the unit, be sure the
antenna or cable system is grounded so as to provide protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, NSI/NFPA 70, provides information regarding proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an Antenna-discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
14. LIGHTNING: For added protection for the unit during a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent
damage to the unit due to lightning and power line surges.
15. POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, take extreme care to keep from touching such power lines or circuits as contact with them might be
fatal.
16. OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
17. OBJECT AND LIQUID ENTRY: Never push objects of any kind into the unit through openings as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind
on the unit.
18. SERVICING: Do not attempt to service the unit yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19. REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
20. SAFETY CHECK: Upon completion of any service or repairs to the unit, ask the service technician to perform safety
checks to determine that the unit is in proper operating condition.
21. WALL OR CEILING MOUNTING: The unit should be mounted to a wall or ceiling only as recommended by the
manufacturer.
22. HEAT: The unit should be situated away from heat sources such as radiators, heat registers, stoves, or other units
(including amplifiers) that produce heat.
23. IMPORTANT SAFETY NOTE: Before connecting a new component such as the DVD 7 to your audio or home
theater system it is always good practice to make certain that all components are turned off, and preferably
unplugged from their AC power source. Many modern electronics products feature automatic turn-on circuits that
may be activated during an installation, causing the potential for damage to electronic components and/or speakers.
Such damage is not covered by product warranties and Cary Audio specifically disclaims responsibility for any such
damage.
Power Cord: The removable power cord that is shipped with the player is specifically designed to be used with this
product. Other AC cords may be used, so consult your dealer for advice on AC power cords and high quality wire in
your system.
AC Fuse: The fuse is located inside the chassis and is not user serviceable. If power does not
come on, contact your authorized service representative.
Wiring: Cables that run inside of walls should have the appropriate markings to indicate compliance with, and listing
by the UL, CSA or other standards required by the UL, CSA, NEC or your local building code. Questions about cables
inside of walls should be referred to a qualified custom installer, or a licensed electrician or low-voltage contractor.
Do Not Open the Cabinet: There are no user serviceable components inside this product. Opening the cabinet
may present a shock hazard, and any modification to the product will void your warranty. If water or any metal
object, such as a paper clip, coin, or staple accidentally falls inside the unit, disconnect it from the AC power source
immediately and contact Cary Audio for further instructions.
24. RECORDING COPYRIGHT: Recording of copyrighted material for other than personal use is illegal without
permission of the copyright holder.
25. NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV system installer's attention to
article 820-40 of the NEC, ANSI/NFPA 70, which provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry
as practical.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
26. FCC INFORMATION FOR USER:
CAUTION: ANY changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from where the receiver is connected.
27. OUTDOOR ANTENNA INSTALLATION/SAFE ANTENNA AND CABLE
CONNECTION: If an outside antenna or cable system is connected to
the equipment, be sure the antenna or cable system is grounded so as to
provide protection against built up static charges and voltage surges,
Section 810 of the national Electrical Code, ANSI/NFP A70 (in Canada,
part 1 of the Canadian Electrical Code) provides information with respect
to proper grounding of the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to grounding
electrodes and requirements for the grounding electrode.
Keep Antenna Clear of High Voltage Power Lines or Circuits
An outside antenna system should be located well away from power lines, electric light or power circuits and where
it will never come into contact with these power sources if it should happen to fall. When installing an outside
antenna, extreme care should be taken to avoid touching power lines, circuits or other power sources as this could
be fatal. Because of the hazards involved, antenna installation should be left to a professional.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
WELCOME
THANK YOU
Dear Customer:
We would like to thank you for your decision to buy a Cary Cinema DVD 7 player. The DVD 7 is
one of the best DVD players available on the market today and we expect that you will enjoy
your cinematic home experience for years to come. The DVD 7 player is a continuance and
elevation of the DVD 6 player which met and exceeded customer expectations time and time
again. The DVD 7’s craftsmanship, forward thinking design, and flexibility make it a desirable
component for all video lovers, integrating well with existing home theater setups and new
designs alike.
Thank you for your support and enjoy your movies!
The Cary Audio Team
PRODUCT FEATURES
The DVD 7, our third generation DVD player, is assembled with the best available components. It
is an innovative design of the highest quality. The DVD 7 player provides video outputs from 480i
to as high as 1080p with HDMI, RGB + HV or Component video outputs. This truly unique feature
is compatible with either HD or ED video displays. The audio soundtrack playback quality
matches the vibrancy and vividness of the video output from the ALWAYS ACTIVE triple video
processor section.
The DVD 7 offers:
• Video outputs from 480i to as high as 1080p with HDMI, RGB + HV or Component video
outputs
• Rugged steel chassis
• Industrial grade DVD CD ROM drive mechanism
• Fiberglass PCBs
• 1% precision parts
• Fully regulated power supplies
• Steel tunnel shielded drive mechanism
• Discrete commands for RS 232 and infra red codes for remote control
The DVD 7 player has 3 completely separate ALWAYS ACTIVE video output sections. You can run
the linked HDMI or RGB video outputs at a display setting of 480p/576p to as high as 1080p at
the same time and same setting. Simultaneously, you can use the Component video outputs at
an independent setting of 480i, 480p, 720p, 1080i or 1080p. The S-Video or the composite video
outputs can run 480i at the same time. If they are all the same aspect ratio, this player can be
the video source for 3 to 6 displays at the same time.
The DVD 7 is also unique because it offers audio playback quality beyond compare. The audio
section of the DVD 7 is derived from the CD 303/300, which was named the “2005 Product of the
Year” by Electronic House magazine. The DVD 7’s sound quality rivals audiophile CD players at
any price point.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
WELCOME
UNPACKING AND INSTALLATION
This section describes the unpacking and installation procedures for your new component.
Unpacking
All Cary Audio Design shipping cartons have been specially designed to protect their contents and
special care has been taken to prevent damage under normal shipping conditions. Mishandling
should be evident upon inspection of the shipping container. If shipping damage is found after
visual inspection, take care not to destroy the evidence. If necessary, document the damage with
photographs and contact the transport carrier immediately.
Carefully remove your new component from its packing carton and examine it closely for signs of
shipping damage. We strongly recommend saving all original packing cartons to protect your
component from damage should you wish to store it or ship it at a later date.
In the Box
When unpacking your DVD 7 player, make sure the following accessories are included. You
should find the following items:
•
•
•
•
Power Cable
Remote Control (batteries already installed)
Owner’s Manual
Warranty Card
Warranty Card
If you are the original purchaser of this unit and you purchased it in the United States, you
should fill out the enclosed warranty registration card and return it to Cary Audio Design within
15 days of your purchase. Cary Audio Design also suggests that you keep your original packing
cartons in case you ever need to ship the unit when moving to a new home. Warranty
restrictions apply. Consult the warranty section of this manual for details. Please be certain to
keep a copy of the original sales receipt from your Authorized Cary Audio Design dealer to
validate the warranty if ever needed.
FORMAT PLAYBACK COMPATIBILITY
The Cinema DVD 7 can play CD, Video CD, DVD Video, DVD-R, DVD+RW and CD-RW disks.
It incorporates technology from Dolby Laboratories®, Digital Theater Systems®, Faroudja®, a
Division of Genesis Microchip and the High Definition Multimedia Interface.
*All trademarks belong to their original owners.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Operating the DVD 7 player is a simple procedure. Each unit is designed for long term stability in
virtually any home operating situation. However, if the unit is operated outside the parameters
outlined in this owner's manual, damage may result. Please read this manual carefully before
putting your new DVD 7 player into operation.
The following section describes the DVD 7 players’ basic specifications. The specifications are
subject to change without notice or obligation.
VIDEO SPECIFICATIONS
...........................................................................................................................................................................
Playback System
DVD Video / Video CD / CD / DVD-RW / DVD+RW / CD-RW
...........................................................................................................................................................................
Video DAC chips
HDMI/RGB/CV
(3 Video chip sets)
Dual Faroudja Video Format
Converter/HDMI
Dual 12 bit/216 MHz/RGB
12 bit/108 mHz Component Video (CV)
...........................................................................................................................................................................
Video S/N Ratio
78.5 dB
...........................................................................................................................................................................
Video Signal Resolution
540 TV Lines (DVD)
...........................................................................................................................................................................
Signal Format System
PAL / NTSC
...........................................................................................................................................................................
Composite Video Output
1.0 volt peak to peak (75 Ohm), Sync Negative
...........................................................................................................................................................................
S-Video
Luminance Signal: 1 volt peak to peak (75 Ohm load)
Color Signal: 0.286 volt peak to peak (75 Ohm load)
...........................................................................................................................................................................
Interlaced and Progressive Y Output Level: 1.0 volt peak to peak (75 Ohm load)
Component Video Output
Pb Output Level: 0.7 volt peak to peak (75 Ohm load)
Pr Output Level: 0.7 volt peak to peak (75 Ohm load)
...........................................................................................................................................................................
Progressive Component
Output Settings
480p/576p, 720p, 1080i, 1080p
...........................................................................................................................................................................
Interlaced Video Outputs
480i - Component, S-video and Composite Video
...........................................................................................................................................................................
HDMI/RGB
Output Settings
480p/576p, 720p, 1080i, 1080p, 600x800, 1024x768,
1280x1024, 1366x768
...........................................................................................................................................................................
AUDIO SPECIFICATIONS
...........................................................................................................................................................................
Master Clock Jitter
Below measurable levels
...........................................................................................................................................................................
Digital/Analog Converters Burr Brown PCM 1792u
...........................................................................................................................................................................
Analog Filter
Third Order Bessel
...........................................................................................................................................................................
Analog Outputs
RCA, XLR stereo
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
...........................................................................................................................................................................
Frequency Range
2-22 kHz Fs = 48 kHz
2-44 kHz Fs = 96 kHz
...........................................................................................................................................................................
Amplifier Linearity
0.1dB (20 Hz – 20 kHz)
...........................................................................................................................................................................
Phase Linearity
3.0 degrees (20 Hz – 20 kHz)
...........................................................................................................................................................................
Dynamic Range
120 dB (1 kHz)
...........................................................................................................................................................................
Signal-to-Noise Ratio
120 dB (1 kHz)
...........................................................................................................................................................................
Channel Separation
108 dB (1 kHz)
...........................................................................................................................................................................
Total Harmonic Distortion 0.0008% (1 kHz)
...........................................................................................................................................................................
Audio Output Level
RCA - 2.2 V rms fixed, XLR - 4.4 volts fixed
RCA - 3.0 V rms variable, XLR - 6.0 volts variable
...........................................................................................................................................................................
DIGITAL AUDIO OUTPUT SPECIFICATIONS
...........................................................................................................................................................................
Coaxial Digital
Dolby Digital / DTS / LPCM 200 mV rms @ 75 Ohms
...........................................................................................................................................................................
Optical Digital (Toslink)
Dolby Digital / DTS / LPCM
...........................................................................................................................................................................
AC Power
110 - 120 Volts AC or 220-240 Volts AC, 50 - 60 Hz
...........................................................................................................................................................................
Power Consumption
32 watts - Operation
5 watts - Standby
...........................................................................................................................................................................
Video Output Modes
Component Video: 480i, 480/576p, 720p, 1080i, 1080p
HDMI/RGB+HV: 480p, 720p, 1080i, 1080p, 600x800, 1024x768,
1280x1024, 1366x768
S-Video, Composite Video: 480i
...........................................................................................................................................................................
Chassis
Black enamel steel chassis, silver anodized aluminum front panel
...........................................................................................................................................................................
Weight
35 lbs.
...........................................................................................................................................................................
Dimensions
18" W x 4" H x 14"
...........................................................................................................................................................................
8
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS
To accommodate a wide range of home entertainment systems, this player features numerous
types of connections for both audio and video. Please continue reading this section for help
determining the best possible connections for your system.
BEFORE CONNECTING
Read the instruction manuals of any component that you plan to connect to the DVD 7 player.
For all components, turn the power off and unplug them from the wall outlet before making any
connections.
Connect the DVD 7 player to the TV directly. If you connect the DVD 7 player to a VCR, TV/VCR
combination, or video selector, the playback picture may be distorted as DVD Video images are
copy protected.
Please note that video connections to a TV or monitor are necessary because some discs require
on-screen menu interaction before they can be played.
CONNECTIONS TO A TV
Using the Audio/Video Connection Cable
Using the audio/video cable (Three RCA cables with left and right audio plus one video cable,
not included), make audio connections from the ANALOG OUTPUT L and R jacks to the
corresponding audio input jacks on the TV. In the same manner, make the composite video
connection from the VIDEO OUTPUT video jack to the corresponding video input jack on the TV.
Be sure to set Audio Setup > Speaker Setup Select to "Movie Stereo" using the on-screen setup
menu.
Note: Be sure to match the colors of the plugs on the cable with the corresponding
jacks on the DVD 7 player and the TV: yellow for composite video, red for R (right)
audio and white for L (left) audio.
OPTIONAL VIDEO CONNECTIONS
Visible improvement in video quality, when compared to composite video connections, can be
achieved by making either S-Video or component video connections to a TV or monitor
compatible with these connections. When either S-Video or component video connections are
made, it is not necessary to make composite video connections using the yellow cord of the
audio-video cable.
Making Component Video Connections (Interlaced)
If the TV or monitor has interlaced component video inputs, making this type of video
connection will produce the ideal picture quality for the presentation of DVD video. Using a
component video cable (not included), connect the interlaced VIDEO OUTPUT COMPONENT
jacks to the corresponding component video input jacks on the TV. Actual labels for
component video inputs may vary depending on the TV manufacturer. (E.g. Y, R-Y, B-Y or Y,
CB, CR) Component video cables are typically designated with red (R), blue (B), and green
(G) color bands to show how to correctly connect them to the player and the TV.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS
In some TVs or monitors, the colors levels of the playback picture may be reduced slightly or
the tint may change. In such a case, adjust the TV or monitor for optimum performance. Be
sure to set Audio Setup > Speaker Setup Select to "Movie Stereo" using the on-screen menu.
Making Component Video Connections (Progressive)
Some TVs or video monitors are equipped with Progressive Scan component video inputs
(with BNC Connectors) that are capable of reproducing a progressively scanned video signal.
Connecting to these inputs allows you to view the highest quality picture with less flicker.
Please ensure that the Red, Blue, and Green designated cables are correctly connected by
matching colors at the DVD player and at the TV connections. Component video connections
offer the best video playback for many TVs.
Making S-Video Connections
If the TV or monitor has an S-video input, making this type of video connection will produce
improved picture quality over a composite video connection. Using an S-video cable, connect
the VIDEO OUTPUT S-Video jack to the corresponding S-video input jack on the TV. Be sure
to set Audio Setup Speaker Setup Select to "Movie Stereo" using the on-screen menu.
OPTIONAL AUDIO CONNECTIONS
The DVD 7 player provides numerous ways to take full advantage of the digital multi-channel
sound recorded on DVD media.
When listening to CD Audio
For full enjoyment of CD Audio media, it is recommended to make connections from the Left
and Right ANALOG OUTPUT jacks to the Left and Right DVD or CD player input connections
on your preamplifier, AV Receiver or surround processor.
Making Stereo Audio Connections
By making connections to a stereo system, you can improve the quality of the sound of
cinematic presentations as well as make effective use of the DVD player's ability to playback
CDs. Using an audio cable (sold separately), make audio connections from the ANALOG
OUTPUT L and R jacks to the corresponding jacks on the stereo component.
Note: Be sure to match the colors of the plugs on the cable with the corresponding
jacks on the DVD player and the stereo component: red for Right audio and white for
Left audio. Do not make connections to the PHONO input jacks on the stereo
component, as it is not compatible with regular line level inputs.
Digital Connections
Make digital connections from the DVD player to an AV component that features digital input
capability or one or more multi-channel audio decoders to realize the full cinematic
experience made possible by the DVD format. This DVD player features one set each of an
optical and a coaxial digital audio output jack and can output Dolby Digital, DTS and PCM bit
streams. Make connections from the DIGITAL OUTPUT OPTICAL (Toslink) jacks to the digital
optical input jack on the AV component using an optical fiber cable (sold separately). Make
connections from the DIGITAL OUTPUT COAXIAL jacks to the digital coaxial input jack on the
AV component using a coaxial cable (sold separately). It is not necessary to make more than
one type of digital connection to a single component, when you are making connections to
an amp or receiver that has internal Dolby Digital or DTS decoding capabilities.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND DISPLAYS
FRONT PANEL
1. POWER
• Press once to turn the power ON.
• Press again to turn the power OFF. The DVD 7 will enter STANDBY and the blue
POWER LED will light.
2. VIDEO OFF
• Press once to turn the video OFF (for best CD Audio playback) and the blue LED will
light.
• Press again to turn the video ON for DVD video playback.
3. DISC LOADER TRAY
• Load discs here.
4. ALPHANUMERIC Display
• A multi-character display providing information on the operation of the DVD 7 player.
5. DISC LOADER TRAY OPEN/CLOSE
• Press this button to open and close the disc loader tray.
6. AUTOMATIC SEARCH, REVERSE
• Press this button to return to the beginning of the present track.
• Press again to return to a previous track.
7. AUTOMATIC SEARCH, FORWARD
• Press this button to move forward to the beginning of the next track.
• Press again to move ahead to other tracks.
8. PLAY
• Press this button to start playback.
9. DOLBY DIGITAL Indicator
• This LED lights when the DOLBY DIGITAL decoding function is ON.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND DISPLAYS
10. DTS Indicator
• This LED lights when the DTS decoding function is ON.
11. STOP
• Press this button to stop playback.
12. REPEAT
• Press this button to play a single track or all tracks repeatedly, as shown in the alpha
numeric display window.
13. VIDEO OFF Indicator
• This LED lights when the video outputs are set to OFF mode.
14. POWER Indicator
• This LED lights when the player is turned OFF.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND DISPLAYS
REAR PANEL
1. RIGHT CHANNEL ANALOG OUTPUT JACK (AES/EBU Balanced)
• Use this jack for connection to the amplifier's right channel balanced input jack.
2. RIGHT CHANNEL ANALOG OUTPUT JACK (RCA Unbalanced)
• Use this jack for connection to the amplifier's RCA right channel unbalanced input jack.
3. LEFT CHANNEL ANALOG OUTPUT JACK (RCA Unbalanced)
• Use this jack for connection to the amplifier's RCA left channel unbalanced input jack.
4. LEFT CHANNEL ANALOG OUTPUT JACK (AES/EBU Balanced)
• Use this jack for connection to the amplifier's left channel balanced input jack.
5. HDMI OUTPUT JACK
• Use this jack to connect to a TV, Monitor or AV receiver that has an HDMI input.
6. 480p-1080p PROGRESSIVE COMPONENT VIDEO OUTPUT JACKS
• Use these jacks to connect to a TV, Monitor or AV receiver that has progressive
component video capability and inputs. The connectors used for this are BNC
connections. BNC > RCA adapters are available if your display uses RCA connections.
7. RGB+HV SYNC VIDEO OUTPUT JACKS
• Use these jacks to connect to a TV, Monitor or AV receiver that has RGB+HV SYNC
video inputs. These are BNC connections. Consult your dealer about matching cables.
8. 480i INTERLACED COMPONENT VIDEO OUTPUT JACKS
• Use these jacks to connect to a TV, Monitor or AV receiver that has interlaced
component video capability and inputs. The outputs for this section use RCA
connections, with 75 Ohm cable (not included).
9. S-VIDEO OUTPUT JACK
• Use this jack to connect to a TV, Monitor or AV receiver that has an S-VIDEO input. An
S-video cable is needed to use this connection (not included).
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND DISPLAYS
10. COMPOSITE VIDEO OUTPUT JACK
• Use this jack to connect to a TV, Monitor or AV receiver that has a composite VIDEO
input. Composite video connections use an RCA connector with 75 ohm cable for best
results (not included).
11. POWER INPUT (AC IN)
• Connect to an AC power supply using the included power supply cord.
12. DC TRIGGER INPUT TERMINALS
• Connect a device that can be triggered by DC + 12V trigger signal.
13. IR INPUT JACK
• Use this jack to connect external IR sensors.
14. RS 232 PORT
• The RS-232 port is used in conjunction with an external home automation remote
controller to control the operation of the DVD 7. (This is for custom installation use.
Consult your dealer for more information.)
15. DIGITAL OUTPUT JACK (COAXIAL)
• 44.1 kHz - 48 kHz digital data is output from this RCA coaxial digital output connection.
16. DIGITAL OUTPUT JACK (TOSLINK)
• 44.1 kHz - 48 kHz digital data is output from this optical digital output connection.
NOTE: Analog Audio Output: Pin assignments of the XLR-type male analog outputs:
Pin 1: Signal ground
Pin 2: Signal + (non-inverting)
Pin 3: Signal – (inverting)
Connector ground lug: chassis ground
Refer to your associated amplifier’s operating manual to verify that the XLR pin assignments
of its input connectors correspond to the XLR pin assignments for the analog XLR outputs of
the DVD 7. If the pin assignments are different, wire the XLR cable so that the appropriate
XLR output pin connects to the equivalent XLR input pin. We have wired this connector to the
AES/EBU (Audio Engineering Society/European Broadcast Union) standard.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND DISPLAYS
REMOTE CONTROL
This section explains how best to use the remote control to set up and operate the DVD player.
1. OPEN/CLOSE: Use to open or close the tray.
2. NUMBER BUTTONS
3. GO TO: Use to skip to specified title, chapter or
time. Press GO TO, then the track or Chapter
number, and then press PLAY.
4. ANGLE: Use to change the camera angle during
DVD multi-angle scene playback.
5. SETUP: Use to show and hide the set up menu.
6. UP/DOWN/LEFT/RIGHT & ENTER: Use to
navigate on-screen displays and menus. Press
ENTER to select an option or execute a
command.
7. OSD DISPLAY: Use to display information
about the disc playing.
8. STOP: Use to stop the disc.
9. PAUSE: Use to pause playback; press again to
resume playback.
10. POWER: Use to switch the player ON or into
standby.
11. SUBTITLE: Use to select a subtitle display.
12. AUDIO: Use to select the audio channel or
language.
13. MENU: Use to display the top menu of a DVD
disc.
14. TITLE: Use to display a DVD disc menu or the
Disc Navigator of a DVD-RW, CD, Video CD or Mp3 disc.
15. PLAY: Use to start or resume playback.
16. PREVIOUS/NEXT: Use to jump to the start of the previous/next chapter/track.
17. REVERSE/FORWARD: Use to reverse/forward slow motion playback, frame reverse/advance
and reverse/forward scanning.
18. ZOOM +/- BUTTONS: Use to enlarge and reduce the screen image.
19. VOLUME: Use to adjust the level when the variable volume setting is activated in the SET
UP menu.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
SWITCHING ON
After making sure that everything is connected properly and that the player is plugged in, press
the POWER button on the front panel to turn the player on. Turn on your TV and make sure that
it is set to the correct input for the DVD 7.
The front panel POWER button switches the player ON and OFF. When the player is OFF, it can
only be turned back on using the front panel button or the ON button on the remote control.
When the player is ON, you can put it into STANDBY using the POWER button on the remote
control handset or the front panel button.
USING THE ON-SCREEN DISPLAYS
For ease of use, this player makes extensive use of graphical on-screen displays (OSDs).
Familiarize yourself with the way these work as you'll need to use them when setting up the
player, or when using some of the playback features and making more advanced settings for
audio and video.
The screens are navigated in a similar way, using the cursor buttons to change the highlighted
item and pressing ENTER to select it.
CHANGING SETTINGS TO MATCH YOUR TV
Using the SETUP menu, you can determine the settings that best fit your TV and system. Press
the SETUP button. Use the UPꢀ, DOWNꢁ, LEFTꢂ, and RIGHTꢃcursors buttons to select
the desired setting.
1. Select VIDEO SETUP.
2. Select TV DISPLAY.
If you have a widescreen or 16x9 TV, select the Wide
setting. Widescreen DVD software is shown using the
full screen area. When playing software recorded in
conventional (FS or full screen, 4x3) format, the
settings on your TV will determine how the material
is presented. See the manual that came with your TV
for details on what options are available.
If you have a conventional or 4x3 TV, select either
NORMAL (Letter Box) or NORMAL (Pan & Scan). In
Letter Box mode, widescreen software is shown with
black bars at the top and bottom of the screen. Pan
and Scan chops the sides off of widescreen material
to make it fit the NORMAL screen (so even though
the image looks larger on the screen, you're actually
seeing less of the picture). Press ENTER to save the
setting.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
3. Select “TV TYPE”
The default setting of this player is MULTI and unless you notice that the picture is
distorted when playing some discs, you should leave it set to MULTI. If you experience
picture distortion with some discs, set the TV system to match your country or region’s
system. Unfortunately, this may restrict the kinds of disc you can watch.
Once you have made your changes, the settings are retained until they are changed again, even
when the power is turned OFF.
Note: For some menus, the initial values can be changed during playback.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
CHOOSE THE SETUP MENU
The SETUP menu allows you to make alterations to the video, audio, disc, progressive and AV
Sync settings. Use the UPꢀ, DOWNꢁ, LEFTꢂ, and RIGHTꢃcursors buttons to select the
desired setting. Press ENTER to save changes in settings. Press the SETUP button and the
following options appear:
1. VIDEO SETUP
Use this to set the DVD 7 screen mode.
(TV aspect and TV type)
2. AUDIO SETUP
Use this to set the DVD 7 audio output mode.
(Digital and LPCM output settings)
3. DISC SETUP
Use this to set the language to be used when playing the disc. If the set language is not
offered on that disc, the discs default language is set.
4. PROGRESSIVE SETUP
Use this to set the Progressive Video Output mode, HDMI and RGBs Video Output mode.
5. DEFAULTS
Use this to reset the factory defaults settings.
6. AV SYNC SETUP
Use this to set the Audio & Video so they are synchronized in timing for the video and
the audio signals. Some disks have incorrect timing and the video and the audio signals
are slightly out of “synch” which is visible from careful viewing.
VIDEO SETUP
Choose Video Setup and press ENTER. Use the UPꢀ, DOWNꢁ, LEFTꢂ, and
RIGHTꢃcursor buttons to navigate the options within Video Setup. When making changes,
navigate to the desired selection and press ENTER. Press the LEFTꢂarrow to return to the list
of options within Video Setup. To exit Video Setup, use the DOWNꢁ arrow to navigate to the
bottom of the list making SETUP menu visible. Choose the SETUP button to return to the main
SETUP menu.
...........................................................................................................................................................................
TV DISPLAY
Use this to set the shape of your TV’s screen.
Normal / PS (for 4/3 shape screens)
Select this to play wide DVDs in the pan and scan mode.
(with sides of the picture cut off)
Discs for which pan and scan is not specified are played
in the Letter Box mode.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
Normal/LB (Factory default) (for 4/3 shape screens)
Select this to play wide DVDs in the Letter Box mode.
(with black strips at the top and bottom)
Wide (for 16x9 shape screens)
Select this to play wide DVDs in the full-screen mode.
...........................................................................................................................................................................
TV TYPE
TV Type allows you to set your TV's video format.
NTSC & PAL Video Standards
There are differences in discs for the NTSC and the PAL
TV systems. The MPEG video on a DVD disk is stored in a
digital format. It is formatted for one of two mutually
incompatible television systems, either as NTSC or as
PAL/SECAM. Therefore, there are two kinds of DVDs
available, either NTSC DVDs or PAL DVDs. Some players
only play NTSC discs; others play PAL and NTSC discs.
North America, Japan, Korea, the Philippines and parts of South America use the NTSC
format for video. The rest of the world mostly uses the PAL video format. There are two
ways to watch both PAL and NTSC DVDs. You can either view your DVDs on a multi-system
TV display or video projector or you can choose an NTSC/PAL or PAL/NTSC capable DVD
Player. The Cinema DVD 7 is capable of playing either PAL or NTSC format DVD disks. If you
are a movie collector who loves foreign films, the DVD 7 will play your entire collection.
NTSC (Factory default)
Select this when your TV's video format is NTSC. If NTSC is selected, output format is fixed
to NTSC.
PAL
Select this when your TV's video format is PAL. If PAL is selected, output format is fixed to
PAL.
MULTI
Select this when your TV is compatible with both the NTSC and PAL formats. NTSC signals
are output from the video output jacks when discs recorded in NTSC format are played, and
PAL signals are output from the video output jacks when discs recorded in PAL format are
played. Many plasma and LCD based video displays are compatible with this setting.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
...........................................................................................................................................................................
PIC SETTINGS
Use this to set your TV’s video picture settings.
Interlaced
This mode offers picture settings for Video, S-Video and
480i Component Video. The options include:
• 480 Component
Adjusts the darkness or lightness of the opening
screen logo.
• Tint
Adjusts the tint (or color balance) on the screen.
• Gamma
Adjusts the gamma (gray scale light values) on the
screen.
• Y/C Time Cor (rection)
Y/C Time Correction controls the serift in the
Chroma or Luma components of a video image
relative to each other. This can compensate for poor image alignment in the video
signals. Options are 0, 1 or 2.
Progressive
This mode offers picture settings for 480p to 1080p Component Video.
• Contrast
The Contrast control applies gain to the red, green, and blue signals. It affects the
luminance of the video signal (proportional to intensity) that is reproduced for a full
white input signal. Once Brightness is set correctly, Contrast should be set for
comfortable viewing brightness with the prevailing ambient lighting in your room.
• Brightness
The Brightness control could also be called the black level control. It adds or subtracts
an offset, or bias, into the red, green, and blue signals. This should be adjusted so that
black picture content displays as true black on your video display. Incorrect adjustment
of this control is the most common problem of poor quality picture reproduction on
video displays. Set the brightness control first, and then adjust the Contrast control.
• Color
Adjusts the intensity of the color levels on the screen.
RGB & HDMI
This mode offers picture settings for RGBs and HDMI.
• Contrast
The Contrast control applies gain to the red, green, and blue signals. It affects the
luminance of the video signal (proportional to intensity) that is reproduced for a full
white input signal. Once Brightness is set correctly, Contrast should be set for
comfortable viewing brightness with the prevailing ambient lighting in your room.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
• Brightness
The Brightness control could also be called the black level control. It adds or subtracts
an offset, or bias, into the red, green, and blue signals. This should be adjusted so that
black picture content displays as true black on your video display. Incorrect adjustment
of this control is the most common problem of poor quality picture reproduction on
video displays. Set the brightness control first, and then adjust the Contrast control.
• Color
Adjusts the intensity of the color levels on the screen.
...........................................................................................................................................................................
ANGLE MARK
Use this to set the MULTI-ANGLE camera scenes on DVD
Discs.
ON (Factory default)
Select this if you prefer to see the camera icon on-screen
during multi-angle camera scenes on DVD discs.
OFF
Turns off the angle mark on screen.
...........................................................................................................................................................................
CAPTIONS
Use this to set whether of not to display the closed captions
recorded on DVDs.
ON
Select this to display the captions on the screen when
playing DVDs containing English captions.
OFF (Factory default)
Select this when you do not want captions playing on the
screen during DVDs that contain English captions.
...........................................................................................................................................................................
SCREEN SAVER
Use this to make sure a constant image is not displayed for
too long a time, possibly creating “Burn In” on the video
display.
ON (Factory default)
If a constant image is displayed on a plasma or a
conventional CRT type TV, it can “burn in” leaving a
ghost image on the screen.
OFF
Turns off the screen saver function for the DVD 7. Burn in is possible with some video
displays in this setting. Screen saver ON is recommended.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
...........................................................................................................................................................................
WALL PAPER
Use this to select the image to be shown on the screen in the
stop mode and CD play mode.
BLUE
Select this to display a blue background on the TV
display.
BLACK
Select this to display a black background on the TV
display.
PICTURE (Factory default)
Select this to display the wallpaper of the Cary Audio Design logo on the TV display.
...........................................................................................................................................................................
VFD BRIGHT
Use this to select the brightness of the front panel VFD
Display.
OFF
The VFD display is turned off.
LOW
The brightness is set to 25% of the normal setting.
MEDIUM
The brightness is set to 50% of the normal setting.
NORMAL (Factory default)
A normal brightness is set.
AUDIO SETUP
Choose Audio Setup and press ENTER. Use the UPꢀ, DOWNꢁ, LEFTꢂ, and
RIGHTꢃcursor buttons to navigate the options within Video Setup. When making changes,
navigate to the desired selection and press ENTER. Press the LEFTꢂarrow to return to the list
of options within Audio Setup. To exit Audio Setup, choose the SETUP button to return to the
main SETUP menu.
...........................................................................................................................................................................
HDMI OUT
Use this to select the digital output format from the HDMI
jack. With an HDMI cable, both uncompressed video data and
digital audio data e.g., LPCM or bit stream data such as Dolby
Digital, DTS, or MPEG data) can be transmitted with just a
single digital cable connector.
PCM (Factory default)
Linear Pulse Code Modulation (LPCM) data is used in the
TV or Monitor, and converted to analog sound.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
DIGITAL
DIGITAL data is used in a Surround Sound Processor.
Note: The HDMI output of this unit can be connected to a DVI jack on a TV or other
device using a conversion adapter. In this case, it is necessary to use a TV or display
with an HDCP compatible DVI input.
There may be no image output or sound output if connected to a TV or display that is
not compatible with the above format.
Refer to the instruction manual of the TV or display to be connected to this unit for
detailed information regarding the HDMI terminal.
...........................................................................................................................................................................
VOLUME
Use this to select whether the analog output can have
variable volume control.
ON (Factory default)
RCA offers 3.0 volts and XLR offers 6.0 volts variable level
output in stereo analog connections. Use the remote
control to adjust the volume from 0 to 64.
OFF
RCA offers 2.0 volts and XLR offers 4.4 volts fixed level
output in stereo Left and Right analog connections.
...........................................................................................................................................................................
COMPRESSION
Use this to set the dynamic range output when playing Dolby
Digital discs.
OFF (Factory default)
Select OFF to have standard full dynamic range sound
playback.
MIDDLE
Select MIDDLE to have powerful sound with clear dialog
tracks even when the volume is low. This setting is suited
for watching DVDs late at night with the volume low. (This setting is only valid for DVDs
recorded in Dolby Digital.)
FULL
Select FULL to achieve a powerful sound with clear dialog tracks even when the volume is
low. This setting is suited for watching DVDs late at night with the volume low. (This setting
is only valid for DVDs recorded in Dolby Digital.) The FULL setting and the MIDDLE setting
reduce the overall dynamic range of movies for late night viewing, to keep dialog easy to
hear while reducing the volume level changes in a Dolby Digital soundtrack.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
...........................................................................................................................................................................
DIGITAL CLOCK (48kHz/96kHz)
Use this to set the Digital Clock output when playing the
DVDs recorded in linear PCM audio.
LPCM 48K
Linear PCM and packed PCM signals are converted to
44.1 kHz or 48 kHz and output. (The PCM digital audio
output signals are converted to 48 kHz or less in
consideration of copyrights.)
When making digital connections to an AV amplifier that
is not compatible with 96 kHz/88.2 kHz digital input signals.
When playing DVDs recorded in linear PCM or packed PCM and the unit is set to output
digital and analog audio signals simultaneously, the analog audio output signals are also
converted to 48 kHz or below, so we recommend setting to “LPCM 96k” and also making
analog connections.
LPCM 96k (Factory default)
When playing linear PCM or packed PCM DVDs that are not copyright protected for 2-channel
PCM audio signal up to 96 kHz, linear PCM signal are output as such without being converted
from the digital outputs. When playing copyright protected linear PCM or packed PCM DVDs,
in consideration of copyright, no digital signals are output for sources exceeding 48 kHz/16
bits.
DISC SETUP
Choose Disc Setup and press ENTER. Use the UPꢀ, DOWNꢁ, LEFTꢂ, and
RIGHTꢃcursor buttons to navigate the options within Disc Setup. When making changes,
navigate to the desired selection and press ENTER. Press the LEFTꢂarrow to return to the list
of options within Disc Setup. To exit Disc Setup, choose the SETUP button to return to the main
SETUP menu.
...........................................................................................................................................................................
AUDIO
Use this to set the language of the sound output from the
speakers.
ENGLISH (default) - Select if you want the sound in
English.
FRENCH - Select if you want the sound in French.
SPANISH - Select if you want the sound in Spanish.
GERMAN - Select if you want the sound in German.
JAPANESE - Select if you want the sound in Japanese.
OTHERS - Use the numbers to input a language
selection.
(Some disks require these settings to be made in their own SETUP menu.)
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
...........................................................................................................................................................................
SUBTITLE
Use this to set the language of the subtitles displayed on the
TV.
ENGLISH (default) - Select if you want the subtitles in
English.
FRENCH - Select if you want the subtitles in French.
SPANISH - Select if you want the subtitles in Spanish.
GERMAN - Select if you want the subtitles in German.
JAPANESE - Select if you want the subtitles in Japanese.
OTHERS - Use the numbers to input a language
selection.
OFF – Select if you do not want to display the subtitles.
(Some disks require these settings to be made in their own SETUP menu.)
...........................................................................................................................................................................
DISC MENU
Use this to set the language of the menus recorded on the
disc (top menu, etc.)
ENGLISH (default) - Select if you want the menus in
English.
FRENCH - Select if you want the menus in French.
SPANISH - Select if you want the menus in Spanish.
GERMAN - Select if you want the menus in German.
JAPANESE - Select if you want the menus in Japanese.
OTHERS - Use the numbers to input a language selection.
(Some disks require these settings to be made in their own SETUP menu.)
...........................................................................................................................................................................
PARENTAL
Use the Parental Disc Setting to restrict playback of certain
DVDs for certain audiences. The levels of restriction, which
are similar to rating codes used in movie theaters, are listed
below:
• NO_PARENTAL (Factory default)
• 2
• 3 (PG)
• 4 (PG-13)
• 5
• 6 (PG-R)
• 7 (NC-17)
• 8 (X)
Note: Even with adult DVDs, viewing cannot be restricted unless the restriction level
is recorded on the disc. It is however possible to disable playback of all DVDs.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
Movie Rating Guidelines
NR – Not Rated
This is a film which has no rating. In many cases these films were imported from countries
which do not use the MPAA rating system. Other NR films may be from amateur producers
who didn’t intend to have their film widely released. NR Programming may contain all types
of programming including children’s programming, foreign programs, or adult material.
G – General Audience
In the opinion of the review board, these films contain nothing in the way of sexual content,
violence, or language that would be unsuitable for audience of any age.
PG – Parental Guidance
Parental Guidance means the movie may contain some contents such as mild violence,
some brief nudity, and strong language. The contents are not deemed intense.
PG-13 – Parents Strongly Cautioned
Parents with children under 13 are cautioned that the content of movies with this rating
may include more explicit sexual, language, and violence content than movies rated PG.
R – Restricted
These films contain material that is explicit in nature and is not recommended for
unsupervised children under the age of 17.
NC-17 – No One Under 17
These movies contain content which most parents feel is inappropriate for their children
under 17 to view. Content can consist of strong language, nudity, violence, and suggestive
or explicit subject matter.
X – No One under 18
These movies contain inappropriate material for anyone under 18.
...........................................................................................................................................................................
PASSWORD
Use this to change the password that controls the Parental
settings above. The set’s password is set to “3308” by
default.
CHANGE
Use the number buttons to input a 4-digit password, then
press the ENTER button. Make sure you do not forget the
password because the setting cannot be changed without
entering the correct password.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
PROGRESSIVE SETUP
Choose Progressive Setup and press ENTER. Use the UPꢀ, DOWNꢁ, LEFTꢂ, and
RIGHTꢃcursor buttons to navigate the options within Progressive Setup. When making
changes, navigate to the desired selection and press ENTER. Press the LEFTꢂarrow to return
to the list of options within Progressive Setup. To exit Progressive Setup, choose the SETUP
button to return to the main SETUP menu.
...........................................................................................................................................................................
COMPONENT
Use this to select the YUV component output mode.
480P/576P (Factory default)
YUV (480P/576P) component video signal is output from
COMPONENT PROGRESSIVE OUTPUT terminals. 480P is NTSC
progressive and 576P is PAL progressive.
720P
YUV (720P) component video signal is output from COMPONENT PROGRESSIVE OUTPUT
terminals.
1080i
YUV (1080i) component video signal is output from COMPONENT PROGRESSIVE OUTPUT
terminals.
1080P
YUV (1080P) component video signal is output from COMPONENT PROGRESSIVE OUTPUT
terminals.
Note: There will be no image shown on the display if it is not capable of working at
the chosen video setting. Do not try to use incorrect video settings for your display to
avoid potential damage to the video display. Refer to the instruction manual of the TV
or display to be connected to the unit for detailed information regarding the
component jacks.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
...........................................................................................................................................................................
RGB/HDMI
Use this to select the RGB+HV SYNC output and HDMI output linked
setting output mode.
480P/576P (Factory default)
RGB 480P/576P progressive scan analog video signals are
output from the RGB jacks.
RGB 480P/576P digital video signals are output from the HDMI
terminal, with LPCM or DIGITAL audio signals.
720P
RGB 720P progressive scan analog video signals are output from the RGB jacks.
RGB 720P digital video signals are output from the HDMI terminal, with LPCM or DIGITAL
audio signals.
1080I
RGB 1080I interlaced analog video signals are output from the RGB jacks.
RGB 1080I digital video signals are output from the HDMI terminal, with LPCM or DIGITAL
audio signals.
1080P
RGB 1080P progressive scan analog video signals are output from the RGB jacks.
RGB 1080P digital video signals are output from the HDMI terminal, with LPCM or DIGITAL
audio signals.
800x600
RGB 800x600 analog video signals are output from the RGB jacks.
RGB 800x600 digital video signals are output in HDMI terminal, with LPCM or DIGITAL audio
signals.
1024x768
RGB 1024x768 analog video signals are output from the RGB jacks.
RGB 1024x768 digital video signals are output from the HDMI terminal, with LPCM or
DIGITAL audio signals.
1280x1024
RGB 1280x1024 analog video signals are output from the RGB jacks.
RGB 1280x1024 digital video signals are output from the HDMI terminal, with LPCM or
DIGITAL audio signals.
1366x768
RGB 1366x768 analog video signals are output from the RGB jacks.
RGB 1366x768 digital video signals are output from the HDMI terminal, with LPCM or
DIGITAL audio signals.
Note: The HDMI output of this unit can be connected to a DVI jack on a TV or other
device using an HDMI > DVI conversion adapter. In this case, it is necessary to use a
TV or display with an HDCP compatible DVI input. There may be no image output if
connected to a TV or display that is not compatible with the above format. Refer to
the instruction manual of the TV or display to be connected to the unit for detailed
information regarding the RGB+HV SYNC jacks.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
AV SYNC
Choose AV SYNC Setup and press ENTER. Use the UPꢀ, DOWNꢁ, LEFTꢂ, and
RIGHTꢃcursor buttons to navigate the options within AV SYNC Setup. When making changes,
navigate to the desired selection and press ENTER. Press the LEFTꢂarrow to return to the list
of options within AV SYNC Setup. To exit AV SYNC Setup, choose the SETUP button to return to
the main SETUP menu.
...........................................................................................................................................................................
DIGITAL OUT DELAY
Use this to select the digital audio output delay time setting.
(TOSLINK & COAXIAL digital audio output only)
Use this to set the DIGITAL VIDEO and DIGITAL AUDIO OUTPUT
so they are synchronized.
0 (Factory default)
No delay is output.
1 - 600 MS
You can select from 1 to 600 ms time delay in the digital audio
output. Video processing of a DVD disk to a higher video
setting, for example 720p progressive output, takes a little bit
of extra time. If you notice any timing discrepancy between the
sound and the video image you can adjust the timing of the AV
SYNC circuit to keep the video action and the audio signal “in
synch”.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
STARTING A DISC
1. Turn on the Power.
• Press the power button, the power turns on and the standby indicator lights turns off.
• When in standby mode, press the POWER button on remote control unit.
2. Press the OPEN/CLOSE button to open the disc tray.
3. Place the disc in the disc tray.
4. Press the OPEN/CLOSE button.
• For many interactive DVDs and video CDs with playback control, a menu screen
appears. In this case use the procedure in Step F to select the desired item.
• Interactive DVDs are DVDs including multiple camera angles, alternate endings for
stories, and other extras.
5. Press the PLAY button.
6. Use the UPꢀ, DOWNꢁ, LEFTꢂ, and RIGHTꢃcursor buttons to select the desired
item.
• For some discs there is a second menu screen. If so, press the ꢄ button to display
the next menu screen. (See the disc's jacket.)
• The cursor buttons (ꢀ,ꢁ, ꢂ and ꢃ) do not work for video CDs. Instead, use the
number buttons to select the desired item.
7. Press the ENTER button.
• The desired item is selected and playback starts.
• You can return to the menu screen by pressing the MENU/TITLE button while the DVD
is playing, though this depends on the disc.
• Press the PLAY button during playback of a video CD to return to the menu screen.
Note: If a stop type hand symbol appears on the TV screen while buttons are being
operated, that operation is not possible on the DVD 7 or with that disc. Do not place
more than one disc in the disc tray. The disc keeps turning while the menu screen is
displayed on the TV screen.
STOPPING PLAYBACK
1. During playback, press the STOP button on the main unit or the remote control unit.
Playback will stop and the wallpaper is displayed.
2. Resume play memory function. (DVD only)
3. With the DVD 7, when the STOP button is pressed, that position is stored in the memory.
At that time, "PLAY" flashes on the display. When the PLAY button is pressed, playback
resumes from the position where it was stopped. The resume play memory function is
cancelled if the disc tray is opened or the STOP button is pressed a second time.
4. If you do not want to continue playing the disc or to save electricity press the POWER
button on the main unit to turn the power off or press the POWER OFF button on the
remote control unit to set the power to the standby mode.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
PAUSING PLAYBACK
During playback, press the PAUSE button on the remote control. Press the PAUSE button a
second time or press the PLAY button to resume normal playback.
FORWARD/REVERSE SEARCHING
During playback, press one of the REW/FF buttons on the remote control unit.
ꢅ : Reverse direction
ꢆ : Forward direction
When pressed again, the search speed increases (in four steps). Increases are variable in 4 steps
for CDs, 4 steps for DVD video (movie part), DVD video and video CD discs. Press the PLAY
button to resume normal playback.
Note: In some cases the menu screen may reappear when one of the REW/FF buttons is
pressed during menu playback on a video CD.
SKIPPING TO THE BEGINNING OF CHAPTERS OR TRACKS
Cueing using the SKIP button
During playback, press one of the skip buttons on the main unit or the remote control unit.
ꢇ : Reverse direction (PREVIOUS)
ꢄ : Forward direction (NEXT)
A track or chapter is skipped for each time the SKIP button is pressed. When the skip back
button is pressed once, the pickup returns to the beginning of the currently playing chapter or
track.
Note: In some cases the menu screen may reappear when one of the SKIP buttons is
pressed during menu playback on a video CD.
Cueing Using the Number Buttons
Press the GOTO MODE button during playback. The GOTO mode switches each time the button is
pressed changing the Chapter or Track number. Once you have made your selection, press PLAY.
For DVD video discs: Title (whole disk) / Chapter (one section of a disk)
For CDs and video CDs: Track Only
When the GOTO mode is set by pressing the GOTO MODE button, the memory is stored until the
button is pressed again.
However, the GOTO mode returns to the default mode when the power is turned OFF. Use the
number buttons to input the number to be played.
Note: Some DVD video and video CD discs do not operate as described in this manual
due to the intentions of the discs' producers.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
PLAYING FRAME BY FRAME (FOR DVDS AND VIDEO CDS ONLY)
During playback, press the PAUSE button on the remote control.
•
•
•
The picture moves forward one frame each time the button is pressed again.
Press the PLAY button to resume normal playback.
With DVD audio discs, forward frame-by-frame skipping is only possible for the video part.
SELECTING THE STILL IMAGE
During playback, press the PREVIOUS or NEXT button on the remote control unit.
•
On some discs the image cannot be selected due to the intentions of the discs' producers.
PLAYING BONUS GROUPS
A. In the stop mode, press the TITLE button on the remote control unit to set the search
mode to "GROUP".
B. Use the number buttons to input the bonus group number.
C. Use the number buttons on the remote control unit to input the password (3 digits), then
press the ENTER button.
Playback starts from the first track in the specified group. In some cases the password must be
entered on the menu screen.
In these cases, follow the instructions on the screen.
•
Once the password is input, the disc can be played as many times as you want until it is
removed.
•
If you make a mistake when inputting the password, press the ENTER button on the
remote control unit.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVICE AND CARE
CARE AND CLEANING
The cabinet housing and front panel of the DVD 7 may be cleaned with a soft cloth and Windex
or a window cleaner. The frequency of cleaning will be governed by how many hours the DVD 7
is operated and by operating environment cleanliness.
FACTORY SERVICE
Careful consideration has been given to the design of your DVD 7 player to keep maintenance
problems to a minimum. Any problems or requests for service should be referred to our
Customer Service Department at 919-355-0010. DO NOT return the DVD 7 to the factory without
a return authorization number (RA) from the Customer Service Department.
Cary Audio Design will assume no responsibility if the shipping company refuses to pay for
damage due to your improper packing or lack of insurance should the unit be lost or damaged in
shipment. Please retain and always use the original shipping carton for shipping the player.
NON-WARRANTY REPAIRS
Cary Audio Design will provide repair service for its products charging on a time and expense
basis. At this time, the standard non warranty service bench fee is $125 with all parts used for
repair charged extra. This may change and is not a quote for service. Please call us at 919-355-
0010 for more information about out of warranty service and repair fees.
CAUTION - Never remove or insert the back panel AC plug when the unit is on or the
ac cord is plugged into the wall.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
UNITED STATES LIMITED WARRANTY
Cary Audio Design warrants to the original United States purchaser for use in the United States that Cary
Audio Design vacuum tube or solid state power amplifiers, surround sound processors or preamplifiers shall
be free from defects in parts or workmanship for three (3) years from the date of the original purchase.
Vacuum tubes, if any are used in the component, are offered a 90 day from purchase date exchange policy
against defects with the exception of the CAVT 300B vacuum tube which has a (1) one year from purchase
date exchange policy. Any digital drive design, whether a Cary Audio Design CD or SACD player or a Cary
Cinema DVD player, has a limited one year parts and labor warranty against defects in manufacture. This is
a limited warrant, for the original purchaser only and does not transfer to any subsequent owner.
During the limited warranty period, Cary Audio Design or an authorized Cary Audio Design service facility
will provide free of charge both parts and labor necessary to correct any defects in material or
workmanship.
To obtain such warranty service, the original purchaser must:
1. Complete and send in the warranty Registration Card within 15 days of purchase.
2. If claiming service the owner must send a fully filled in copy of the original sales receipt along with
any unit sent in for service showing the AUTHORIZED CARY AUDIO DESIGN DEALER’S name, the
new selling price, the buyer’s name, e-mail or phone number and address on the receipt. Blank
receipts will NOT validate the limited warranty for service.
3. Notify Cary Audio Design as soon as possible after the discovery of a possible defect and submit
the following information to determine eligibility for warranty:
(a) The model number and serial number;
(b) A fully filled in copy of the original sales receipt showing the original selling price, purchasers
name and address filled in by an AUTHORIZED CARY AUDIO DESIGN DEALER with the original
date of purchase shown on the form;
(c) a detailed description of the problem.
4. Deliver the product to Cary Audio Design or the nearest authorized service facility or ship with all
freight and insurance charges prepaid, in its original packing container or equivalent, to Cary
Audio.
Correct maintenance, repair and use are important to obtain performance from this product. Therefore,
please carefully read the Operating Manual. This warranty does not apply to any defect that Cary Audio
Design in its sole discretion determines is due to:
1. Improper maintenance or repair, including the installation of parts or accessories that do not
conform to the quality and the specifications of the original parts.
2. Misuse, abuse, neglect or improper installation.
3. Accidental or incidental damage.
WARRANTY DISCLAIMER
Except for the express warranties stated herein, Cary Audio Design disclaims all other warranties including,
without limitation, all implied warranties of merchantability and fitness for a particular purpose. The
foregoing constitutes Cary Audio Design’s entire obligation with respect to this product, and the original
purchaser and any user or owner shall have no other claim for incidental or consequential damages. Some
states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation and exclusion may not apply to you. This warranty gives legal rights and you may also have other
rights, which vary from state to state.
EXCLUSIVE REMEDY
Notwithstanding the foregoing, the purchaser’s exclusive remedy for any breach of warranty, express or
implied, is limited to the repair or replacement of the defective unit or the refund of the purchase price, at
the option of Cary Audio Design. Under no circumstances is Cary Audio Design liable for incidental or
consequential damages. Any implied warranties imposed by law terminate one (1) year from the date of
purchase.
INTERNATIONAL PURCHASERS (Export markets)
Cary Audio Design warrants its merchandise to purchasers within the United States exclusively for use within
the United States of America. It provides no other warranties, expressed or implied. If you are living
outside the USA, please consult with your local dealer or distributor to determine the details of your local
warranty.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
CARY AUDIO DESIGN
1020 Goodworth Drive, Apex, NC 27539
phone 919-355-0010
fax 919-355-0013
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
Download from Www.Somanuals.com. All Manuals Search And Download.
|