6.2010
Download from Www.Somanuals.com. All Manuals Search And Download.
,
MONITOR OPERATION
Releasing the Monitor
USER S MANUAL
Push the open button (located on the front edge of the screen housing)
and lower the monitor to the desired angle. You can also adjust the
swivel angle.
,
Please read this User s Manual in detail and use the set properly.
PRECAUTIONS…………………………………………………4
INSTALLATION… … … … … … … … … … … … … … … … … …5
FEATURES AND CONTROLS… … … … … … … … … … … …6
A/V AND POWER CONNECTIONS……………………………8
MONITOR OPERATION… … … … … … … … … … … … … … …9
Releasing the Monitor… … … … … … … … … … … … … …9
How to watch the Monitor… … … … … … … … … … 9
SPECIFICATIONS………………………………………………10
PUSH BUTTON
How to use the monitor
1. Connect the monitor to the external devices.
2. Press the POWER button on either the remote control or the unit once to turn
the power on.
Press the same POWER button to turn the power off.
POWER
POWER
REMOTE CONTROLLER
UNIT
3. Turn on the external devices and view.
9
2
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
A/V AND POWER CONNECTIONS
,
Please read and observe all warnings and instructions in this owner s manual
and those marked on the unit. Retain this booklet for future reference.
There are two kinds of alarm symbols as follows:
M
ENU
R
V
I
D
E
O
White AUDIO(L)
Red AUDIO(R)
DVD PLAYER
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of
,
＂dangerous voltage＂within the product s enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to
GAME
Yellow VIDEO
WARNING
people.
CAMCORDER
FUSE
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
YELLOW
+ 12 V DC Battery
AV Input
(AV 1)
BLACK
RED
Chassis Ground
ACC
the product.
CAUTION
Car dome lamp
WHITE
WARNING
Yellow Video
Do not mount the product where
Installation of all TV monitors
must be out of the drivers
field of vision.
it will obstruct the deployment of
the airbag or in an area where it
would affect the vehicular control.
Also be careful to avoid mounting
the product where it can become
hazardous during sudden stops or
in the event of an accident.
M
E
N
U
Video2 Input
Do not try and service these
products yourself. Seek only
a qualified service center or
factory service center.
Use extra caution with any liquids
in your car. If you or your child
spills any liquid on these products,
pull your vehicle to the roadside
and turn the key off to disconnect
or wipe the products with a towel. Do not
operate the equipment until all liquids have
either evaporated or you have had the monitor
inspected at a service center by a qualified
technician, Severe harm or danger can occur.
Be careful not to drop or apply
pressure to the front panel of
your video monitor. If the screen
cracks due to misuse, your warranty
will be void!
Use only a damp cloth to clean
the screen and use only purified
water on the cloth. Wring out all
excess water prior to wiping the
screen. Do not use any cleaners
or chemicals to clean the screen.
In most cases a dry cloth will do!
Positive Negative
Trigger Door Trigger Door
Switch Switch
Dome Light Trigger
3
8
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
FEATURES AND CONTROLS
CAUTION
MENU Button
Watching the monitor for an
extended period of time
with the engine turned off
may deplete the vehicle s
battery.
Right Dome Light Button
POWER Button
Quality installations are best
performed by qualified and
certified installers.
，
This product is designed for
operation with a 12 Volt DC,
negative ground vehicle. It
is not suitable for operation
under other conditions or
voltages.
，
Don t touch the unit if there is
a flash of lightning. It may
receive an electric shock.
Left Dome Light Button
A/V select
Button
Up/Down button
Do not cover heater ducts or vents.
This may cause a fire or an electric
shock.
Interface Switch Function
Power：Power ON/OFF
AV： Signal Select
Menu： Press this button for OSD menu.
And select menu option
+： Increase current option value.
-： Decrease current option value.
Check Point
1. The operating temperature of this product is limited to 14 F~140 F
(-10 C~60 C).
Your vehicle can reach temperatures up to 100 C in the summertime.
POWER KEY
AV1/V2 KEY
2. When your vehicle is extremely hot or cold you must allow time for your air
conditioner or heater to cool or heat the vehicle and for operating temperatures
to return to normal operating ranges. Your monitor will return to its normal
functions when these operating ranges are achieved.
MENU KEY
+ KEY
3. Optimum picture quality is achieved when you are directly in front of the monitor
(+/-45 degrees).
- KEY
LCD MONITOR
REMOTE CONTROL UNIT
7
4
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
FEATURES AND CONTROLS
1. Open the packaging and check that these parts are present.
Dome light
INSTALLATION PLATE
UNIT
SCREW A
SCREW B
2. Connect the external components to the RCA cable or AV output.
(Refer to the connection diagram on page 8)
Infrared Transmitter
3. Match the position of installation bracket and
installation plate with screw A.
Monitor
(Front)
4. Secure the unit in place with the supplied
screw B.
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|