Operating and Assembly Instructions
VC 422-610
Glass Ceramic Electric Cooktop
VC 422-610
Important safeguards
Page 3-4
1. Important Notes
For your safety
Operating for the first time
About use
Page 5-6
Page 5
Page 6
Page 6
2. Features
Page 7-8
Page 7
Page 7
Page 8
Features
Special accessories
Visual signals
3. Operation
Page 9-10
Page 9
Switching on and off
Indicator light / Residual heat display
Cooking zone extension
Holiday safeguard
Page 9
Page 10
Page 10
4. Energy Saving Tips
5. Settings Table
Page 11
Page 12
Page 13
Page 14
6. Cleaning and Care
7. Maintenance
8. Installation
Page 15-20
Page 15
Technical Data
Important notes on installation
Electrical connection
Preparing the cabinet
Installing the control panel
Installing the cooktop
Page 15
Page 16
Page 17-18
Page 19
Page 20
1
Congratulations on buying your new
“Vario” appliance.
Before switching your appliance on for the first
time, we would like you to familiarize yourself with
your new appliance. In this manual you will find
important notes on safety and operation. These
will serve to ensure your personal safety and the
lasting value of your appliance.
You will find notes on Page 4 that you ought to
observe before operating the appliance for the
first time.
The chapters entitled “Features" and “Operation"
tell you all about what your appliance can do and
how you operate it.
The chapter entitled “Cleaning and Care" gives
tips on how to keep your appliance looking good.
And now we wish you lots of fun cooking.
2
Important safeguards
4. a) Use Proper Pan Size – This appliance is
equipped with one or more surface units of
different size. Select utensils having flat
bottoms large enough to cover the surface
unit heating element. The use of undersized
utensils will expose a portion of the heating
element to direct contact and may result in
burned clothing. Proper relationship of utensil
to burner will also improve efficiency.
1. Read All Instructions.
2. To eliminate the risk of burns or fire by reaching
over the heated surface units, cabinet storage
space located above the surface units should be
avoided. If cabinet storage is to be provided, the
risk can be reduced by installing a range hood
that projects horizontally a minimum of 5 inches
(127 mm) beyond the bottom of cabinets.
b) Never Leave Surface Units Unattended at
High Heat Settings – Boilover causes smoking
and greasy spillovers that may ignite.
c) Glazed Cooking Utensils – Only certain types
of glass, glass / ceramic, ceramic, earth-
enware or other glazed utensils are suitable
for rangetop service without breaking due to
the sudden change in temperature.
d) Utensil Handles Should Be Turned Inward and
Not Extend Over Adjacent Surface Units –
To reduce the risk of burns, ignition of
flammable materials, and spillage due to
unintentional contact with the utensil, the
handle of a utensil should be positioned so
that it is turned inward, and does not extend
over adjacent surface units.
3. Important instructions
a) Ensure that this appliance is properly
connected and grounded by a qualified
electrician.
b) Never use this appliance for warming or
heating the room.
c) Do Not Leave Children Alone – Children
should not be left alone or unattended in area
where appliances are in use. They should
never be allowed to sit or stand on any part
of the appliance.
d) Wear Proper Apparel – Loose fitting or
hanging garments should never be worn
while using the appliance.
e) User Servicing – Do not repair or replace
any part of the appliance unless specifically
recomended in the manual. All other
servicing should be referred to a qualified
technician.
f) Storage in or on Appliance – Flammable
materials should not be stored in an oven or
near surface units.
5. a) Do Not Cook on Broken Cooktop – If cooktop
should break, cleaning solutions and
spillovers may penetrate the broken cooktop
and create a risk of electric shock.
Contact a qualified technician immediately.
b) Clean Cooktop With Caution – If a wet
sponge or cloth is used to wipe spills on a hot
cooking area, be careful to avoid steam burn.
Some cleaners can produce noxious fumes if
applied to a hot surface.
g) Do Not Use Water on Grease Fires – Smother
fire or flame or use dry chemical or foam-type
extinguisher.
h) Use Only Dry Potholders – Moist or damp
potholders on hot surface may result in burns
from steam. Do not let potholders touch hot
heating elements. Do not use a towel or other
bulky cloth.
6. CAUTION:
Do not store items of interest to children in
cabinets above a range. Children climbing on
the appliance to reach items could be seriosly
injured.
3
7. DO NOT TOUCH SURFACE UNITS OR AREAS
NEAR UNITS – Surface units may be hot even
though they are dark in color. Areas near surface
units may become hot enough to cause burns.
During and after use, do not touch or let clothing
or other flammable materials contact heating
elements or areas near units until they have had
sufficient time to cool.
8. The surface temperature of the glass top is pro-
tected by high limit thermostats built into each
individual burner. The maximum temperature of
the glass ceramic top is rated at 1 080 °F. The
thermal protectors are rated at 939 °F to cycle
the burner off in order to protect the glass top.
Even on the highest setting, it is normal for the
burner to cycle on and off momentarily as the
thermostat senses a high heat condition. This
could be caused by size of the cooking utensil,
composition and gauge of materials in the
construction of the utensil and, most importantly,
the amount of surface contact between the glass
surface and the cooking utensil. Uneven
surfaces on cookware can cause premature
cycling of the high heat limit protection system.
9. Note – To avoid jeopardising the electrical
safety of the appliance, it is forbidden to use
high-pressure or steam jet cleaning devices.
10.Save These Instructions.
4
1. Important Notes
For your safety
Do not operate the appliance if it is damaged.
Operation of the appliance must be discontinued
immediately if improper use produces cracks,
breaks or flaws on the cooking surface, with the
result that live parts can come into contact directly
or indirectly with seeping liquid or if there is a risk
of injury. Remove the mains plug or switch off the
corresponding mains fuse. Call after-sales service!
The appliance must only be connected by
an authorised specialist, paying attention to
the relevant regulations of the power supply
companies and the regional construction
regulations.
Observe the assembly instructions!
The appliance could be damaged if connected
wrongly!
Isolate the appliance from the mains during every
maintenance operation. To do this, remove the
mains plug or switch off the corresponding fuse.
When connecting electrical appliances in the
proximity of the cooktop, make sure that connecting Repairs must be carried out by authorised
cables do not come into contact with hot cooking
surfaces.
specialists, thus ensuring electrical safety.
As the user, you are responsible for maintenance
and proper use in the household. No warranty
claims can be lodged for any damage resulting
from failure to observe these instructions.
Only ever operate the appliance under supervision.
Observe caution with oils and fats. Overheated oils
and fats can easily cause fires.
Caution: the appliance heats up during operation.
Note:
Keep children away.
if you have fitted the appliance cover VD 400-000
(special accessory) on the appliance, it must not
be closed until the appliance has cooled down
completely. Do not operate the appliance with the
cover closed! Heat development may damage the
appliance and the cover. Do not use the appliance
cover as a surface for placing objects or for
keeping things warm.
Do not operate the cooking positions without pots
and pans placed on them.
To avoid jeopardising the electrical safety of the
appliance, do not use high-pressure or steam jet
cleaning devices.
Do not store any substances that are sensitive to
high temperatures, or which pose a fire hazard
(e.g. cleaning agents or spray cans), in drawers or
cupboards under the appliance.
Subject to technical change without notice.
5
Operating for the first time
About use
Remove the packaging from the appliance and
dispose of it according to local regulations.
Be careful to remove all accessories from the
packaging. Keep packaging elements and plastic
bags away from children.
The appliance is intended solely for household use
and must not be put to any other uses.
Use the appliance to prepare meals only. Do not use
the appliance to heat up the room in which it is
installed.
Check the appliance for transport damage before
installing it.
Do not use the cooking surface to store items.
Place a cooking vessel on the corresponding
cooking zone before operating it. Do not remove
the cooking vessel until you have switched off
the hotplate. The size of pots and pans should
correspond to the size of the hotplate. This will
save you energy and time.
The appliance must be installed and connected by
an authorised specialist before operation. Before
operating the appliance for the first time, make
sure that the mains connection is in proper working
order.
The serial number of the appliance can be found on
the quality control slip which is included with these
instructions. This quality control slip should be kept,
for guarantee reasons, together with your operating
and assembly instructions.
Switch off the hob after use.
Iridiscent discoloration can be caused by the bases
of some pots. These do not interfere with the
operation of the glass ceramic hob.
Read through these instructions attentively before
operating your appliance for the first time.
Always keep the cooking area dry and clean. The
surface can be scratched due to dirt (e.g. sand
grains).
Thoroughly clean the appliance and accessories
before using them for the first time. This will
eliminate any 'newness’ smells and soiling (see
chapter “Cleaning and care”).
Never heat food in aluminium or plastic containers
as the material can melt and damage your hob.
Built-in overheating protection prevents overheating
of the appliance and of surrounding kitchen furni-
ture.
In the event of malfunction, first check your
household fuses. If the power supply is in proper
working order, but the appliance is still not
functioning, please inform your specialist dealer or
your nearest Gaggenau after-sales service.
6
2. Features
Features
1 SuperQuick cooking zone Ø 5 3/4 (1100 W),
converts to roasting zone 5 3/4 x 9 1/2 (2000 W)
1
2
2 SuperQuick cooking zone Ø 7 (1500 W),
converts to Ø 9 (2400 W)
3 Display panel with indicator light and
residual heat display
4 Control knob for front cooking zone
3
4
5
5 Control knob for rear cooking zone
You can order the following special accessory:
Special accessories
VV 400-000
Connecting trim
VZ 400-700 Connecting trim with timer
VD 400-000 Appliance cover
7
Visual signals
Luminous disc Indicator
Signification
Cause / Remedy
behind the
on the
control knob
cooker
lights OFF
appliance is switched OFF
ꢀ
ꢁ
ꢀ
ꢁ
ꢀ
light constantly
cooking zone ON normal use
slow flashing of
indicator light
(long OFF, short ON)
residual heat
display
The appliance is too hot to be
touched safely.
ꢂ
fast flashing of a
luminous disc
holiday safeguard The appliance setting has not been
changed for over 4 hours. Turn
ꢀ
ꢀ
ꢂ
ꢂ
control knobs to 0 and then switch
on again if required.
fast flashing of
both control knobs
power cut
After a power cut, the appliance
stays switched off for safety
reasons. Turn control knobs to 0
and then switch on again if
required.
fast flashing of
both luminous discs
alternately
faulty installation Connecting cable between the
appliance and the control panel
is not plugged in. Check that cable
is plugged in firmly.
ꢀ
ꢂ
8
3. Operation
Switching on
Switching on
Press down the control knob for the corresponding
cooking position and turn it left or right to the
required position (1 -12). The luminous disc behind
the control knob and the corresponding indicator
light on the display panel light up, as long as the
corresponding cooking zone is switched on.
The cooking zones are electronically controlled
during use, in order to maintain a constant heat, the
cooking zone switches on and off intermittently.
Switching off
Fully turn the control knob to the OFF position. The
luminous disc goes off.
Switching off
Indicator light / Residual heat display
Indicator light / Residual heat display
The corresponding indicator light on the display
panel lights, as long as the corresponding cooking
zone is switched on. After switching off the cooking
zone the corresponding indicator light will flash,
as long as the cooking zone has not cooled down
sufficiently to be touched safely.
9
Cooking zone extension
The front cooking zone can be extended to a large
diameter
Activating extension
ꢀ
The rear cooking zone can be converted to an oval
cooking zone especially suitable for oval roasters.
Activating extension
Turn the corresponding control knob to the right to
the extension symbol. An audible signal is sounded
and the extension is activated. Now turn the control
knob further right to the required position (1 -12).
Two spots appear on the indicator display while the
cooking zone is on.
Note: do not use the roaster zone for heating up
round pots or pans.
Switching off
Fully turn the control knob to the OFF position.
The luminous disc goes off. After switching off the
cooking zone the corresponding indicator light will
flash, as long as the cooking zone has not cooled
down sufficiently to be touched safely.
Note:
the extension will not be activated, when switching
the cooking zone on again.
The appliance is set to automatically switch off a
cooking zone 4 hours after the last operation. The
luminous disc behind the corresponding control
knob flashes. Turn the control knob to 0. Now the
cooking zone can be switched on again as normal.
Holiday safeguard
(Automatic switch-off)
10
4. Energy Saving Tips
Pots and saucepans should always be covered by a
matching lid. The cooking time is shortened and
the energy use reduced.
Pay attention to the right size when choosing pots
and pans. The diameters of pots and pans should
correspond to that of the hotplate. When buying
pots, pay attention to the fact that the manufacturer
frequently specifies the top pot diameter, which is
generally larger than the diameter of the base.
We recommend that you use high quality pots and
pans with thick flat bases.
For longer cooking times, it is possible to switch off
the cooking zone before the end of the cooking
time to make use of the residual heat.
11
5. Settings Table
Settings Table
Cooking
level
Cooking method
Examples
12
Boiling
Water
Searing
Heating
Boiling
Meat
Fat, liquids
Soup, sauce
Vegetables
Blanching
11 - 9
8 - 7
Roasting
Meat, fish, potatoes
Browning
Flour, onions
Roasting
Almonds, breadcrumbs
Pancakes, egg dishes
Liquids
Baking
Boiling in open pot
7 - 6
6 - 5
Frying
Bacon
Reducing
Stocks, sauces
Simmering
Simmering in open pot
Sweet sauces
Dumplings, sausages, soup garnish,
meat stock, poached eggs
5 - 4
3 - 1
Boiling with closed lid
Steaming
Pasta, soup, sauces
Vegetables, potatoes, fish
Vegetables, fruit, fish
Stewing
Braising
Thawing
Goulash, rolled beef steaks, roasts, vegetables
Frozen foods
Slow cooking
Rice, pulses
Reheating / keeping warm
Melting
Soup, casserole, vegetables in a sauce
Butter, chocolate
Thickening
Egg dishes
Switch to the highest cooking level in order to reach the required temperature quickly. Then always switch
back to the lower cooking level.
The cooking levels are identical for all cooking zones.
The values given above must be looked upon as recommended values. The heat required depends not
only on the type and condition of the food, but also the size and contents of the pot.
12
6. Cleaning and Care
Iridiscent discoloration can be caused by the bases
of some pots. These do not interfere with the
operation of the glass ceramic hob.
Note: to avoid jeopardising the electrical safety of
the appliance, do not use high-pressure or steam
jet cleaning devices – risk of short circuits!
Please refer to the enclosed brochure for further
notes on cleaning.
Caution, risk of burns! Before cleaning, please
wait until the hob has cooled to hand-warm.
You can order our blade scraper (Order No.
087670) and the Gaggenau glass ceramic cleaner
(Order No. 098690) from your Gaggenau dealer.
Please thoroughly clean the appliance before
operating it for the first time and after every use.
Immediately remove food remains and burnt-in
residues with the blade scraper. The blade is very
sharp. Risk of injury! Only use the blade on the
glass-ceramic hob. Do not use the blade casing as
it may scratch the glass-ceramic.
The frame of the hob should be cleaned using a
soft, damp cloth and light soapy liquid or a
commercially available stainless steel cleaner.
Cleaning the control knobs
Wipe with a damp cloth. Cloth should not be too
wet, as moisture could penetrate behind the control
knob.
Clean the hob with a damp, soft cloth or kitchen
paper and the Gaggenau glass ceramic cleaner or
similar cleaner suitable for glass ceramic cooktops.
Polish with a soft, dry cloth.
The Gaggenau glass ceramic cleaner will coat the
glass ceramic hob with a gleaming, dirt repellent
film. This will help to preserve the attractive
appearance of your hob over a long period of time
and make it easier to clean as well.
Do not apply the cleaner while the hob is still hot as
this may cause stains. Do not use scouring agents,
abrasives or chemically aggressive cleaners (for
example oven cleaner)! Do not use any nitro
polishing agents for cleaning! Do not use any
abrasive sponges either.
Food with a high sugar content (e.g. boiled-over
milk, jam) can damage the surface of your hob.
Immediately remove such food using the glass
scraper.
13
7. Maintenance
The appliance must be disconnected from the
power supply during all repair work.
If the appliance does not function correctly, check
the fuses first.
If the power supply is functioning correctly, but your
appliance still does not work, please contact your
Gaggenau dealer who will provide you with the
address and telephone number of your nearest
manufacturer’s authorized service agent or contact
Gaggenau USA on (800) 828-9165. Specify the
appliance type (see rating plate).
Repairs may only be carried out by authorised
technicians, in order to guarantee the safety of the
appliance.
Unauthorised tampering with the appliance will
invalidate any warranty claims.
Only ever use original spare parts.
14
8. Installation
Technical Data
Total connected load: 4 400 W
AC 208/220-240 V / 60 Hz
Important notes on installation
This appliance can be combined with all Gaggenau
Vario 400 Series appliances.
There must be a gap of at least 20 mm (13/16 ) at the
side between the appliance and any walls or
furnishings.
This appliance may be installed in kitchen
combinations made of wood or similar combustible
materials without taking additional safety measures.
The built-in furniture and worktop where the
appliance is installed must be heat resistant up to
temperatures of 200° F/90° C.
If all poles of the appliances cannot be isolated
from the mains by removing an accessible plug, an
isolating device with a contact gap of at least 3 mm
must be installed (e.g. domestic fuse).
No warranty claims can be lodged for any
damage resulting from failure to observe these
instructions. Pay attention to the “Important
notes" on page 3 and 4.
The appliance must only be connected by an
authorised specialist, paying attention to the
relevant regulations of the power supply companies
and the regional construction regulations.
Subject to technical change without notice.
Pay attention to the data on the rating plate. The
appliance must be properly grounded.
When connecting electrical appliances in the
proximity of cooking surfaces, make sure that
connecting cables do not come into contact with hot
cooking surfaces.
The installation technician is responsible for the
correct functioning of the appliance at the place of
installation. He must instruct the user on how to
disconnect the appliance from electricity in an
emergency.
After unpacking, check the appliance for any
transportation damage and report this immediately
to the transportation company.
15
Electrical connection
Rated power consumption: 4 400 W
Note:
when installing a shelf, observe a distance of at
least 20 mm (13/16 ) from the bottom edge of the
housing trough to the shelf or the next combustible
item of furnishing.
Note:
if there is a need for an intermediate cupboard wall
under the hob, cut out the recess so that the trough
of the hob does not lie on the cupboard side wall
and so that a distance of 20 mm (13/16 ) from the
intermediate cupboard wall is guaranteed.
Please note that a distance of 10 mm (13/32 ) from the
base cabinet must be observed for safety reasons.
(see figure)
Only a qualified electrician should install this
appliance.
This appliance must be hardwired.
The mains connecting cable must at least
correspond to the type SJTO 3x16 AWG 105°C.
The mains connecting cable must only be
purchased through and connected by an
authorised specialist. The appliance must be
properly grounded. Pay attention to the
information on the rating plate.
16
The minimum spaces that must be maintained
between the appliance cooking surface and the
horizontal surface above the cooking top shall be:
A = 30 inches (762 mm) minimum clearance
between the top of the cooking surface and the
bottom of an unprotected wood or metal cabinet; or
A = 24 inches (600 mm) minimum when bottom of
wood or metal cabinet is protected by no less than
1/4-inch-thick flame-retardant millboard covered
with no less than No. 28 MSG sheet steel, 0.015-
inch-thick stainless steel, 0.024-inch-thick
2
A
4
1
3
aluminimum, or 0.020-inch-thick copper.
5
1 Building back wall
2 Top building cabinet
3 Cooking surface
4 Building side wall
5 Building side wall
17
• Cut out the recess for the hob in your worktop.
Proceed as indicated on the installation sketch.
The installation sketch contains the measurements
of the space required for the trim between the
appliances. Several appliances can also be
installed in individual recesses, as long as a
minimum clearance of 50 mm (2 ) is kept to
between the appliances.
Preparing the cabinet
1
4 3
2''
3
/
1
1
2''
3
8 2
1
32''
/
/
/
12 32''
13 32''
/
4''
0 5
51
6
/
2''
/
1
2
''
3
111
2''
3
/
• As shown in the installation sketch, drill the
Ø 35 mm (13/8 ) holes to secure the control knobs
in the cabinet front.
• If the cabinet front is thicker than 26 mm (11/32 ),
the front must be routed from the back to
max. 26 mm (11/32 ) on an area of 80 x 310 mm
(35/32 -1213/64 ).
32''
112
/
in.
m
9
4''
19 1
2
6
/
2''
11
3
/
1
2''
1 3
3
/
.
in
m
4''
3
2 2
6
/
64''
62''
4 9
/
min.
6 13
/
max.
31
2''
/
4''
1
141
6
/
64''
30 7
/
64''
6 4
/
4
''
2
6
min.13/64''
min.13/64''
3 5/32'' x
12 13/64'' x
20/32'' - 1 1/32''
D= 1 1/32''
D> 1 1/32''
18
Installing the control panel
Note:
only install control panel with appliance of the
corresponding type.
Before connecting the appliance, make sure
the electricity is switched off at fuse point!
• Before installation, remove all styrofoam
packaging from the control knobs and peel off
the protective film behind the luminous discs.
• Hold the support plate from the rear against the
cabinet front, insert control knobs into the holes,
secure from the rear with the nuts. Take care to
install control knobs in the correct order: left for
front cooking zone, right for rear cooking zone.
• Secure the control panel with the included nuts
onto the support plate.
19
• Firmly plug the connecting cable in the cooktop
and in the control panel (the plugs must lock into
place).
Installing the cooktop
• Turn the clamping screws to the side. Insert the
hob with the control panel on the front into the
cut-out and align it.
Note: do not stick the hob onto the worktop with
silicone.
• Turn the clamping screws under the countertop
and tighten them evenly. Do not tighten the
clamping screws too tightly, as a uniform sealing
gap should be left all round.
• Connect the appliance to the electricity. Test that
it functions correctly. If the luminous discs behind
both control knobs blink alternately, check the
connecting cable between the appliance and the
control panel is firmly plugged in.
20
9000030301 en 12.04 EB
GAGGENAU HAUSGERÄTE GMBH
CARL-WERY-STR. 34 · 81739 MÜNCHEN
GERMANY
5551 McFADDEN AVENUE
HUNTINGTON BEACH, CA 92649
USA
Y (089) 45 90-03
FAX (089) 45 90-23 47
Y (800) 828-9165 · FAX (714) 901-0979
|