SYSTEM BOARD D1321
SYSTEM BOARD D1321
TECHNICAL MANUAL
TECHNICAL MANUAL
Dieses Handbuch wurde auf Recycling-Papier gedruckt.
This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.
Herausgegeben von/Published by
Fujitsu Siemens Computers GmbH
Bestell-Nr./Order No.: A26361-D1321-Z120-1-7419
Printed in the Federal Republic of Germany
AG 0801 08/01
A26361-D1321-Z120-1-7419
Deutsch
English
Systembaugruppe
D1321
System Board D1321
Technisches Handbuch
Technical Manual
Ausgabe August 2001
August 2001 edition
Intel, Pentium und Celeron sind eingetragene der Intel Corporation, USA.
Microsoft, MS, MS-DOS und Windows sind eingetragene Warenzeichen der Microsoft
Corporation.
PS/2 und OS/2 Warp sind eingetragene Warenzeichen von International Business Machines,
Inc.
Alle weiteren genannten Warenzeichen sind Warenzeichen oder eingetragene Warenzeichen
der jeweiligen Inhaber und werden als geschützt anerkannt.
Copyright ꢀ Fujitsu Siemens Computers GmbH 2001
Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des
Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren.
Zuwiderhandlungen verpflichten zu Schadenersatz.
Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung.
Liefermöglichkeiten und technische Änderungen vorbehalten.
Dieses Handbuch wurde erstellt von
cognitas. Gesellschaft für Technik-Dokumentation mbH
Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA.
Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc.
All other trademarks referenced are trademarks or registered trademarks of their respective
owners, whose protected rights are acknowledged.
All rights, including rights of translation, reproduction by printing, copying or similar methods,
even of parts are reserved.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or design,
are reserved. Delivery subject to availability.
Right of technical modification reserved.
This manual was produced by
cognitas. Gesellschaft für Technik-Dokumentation mbH
Contents
Notational conventions ..............................................................................................................1
Important notes .................................................................................................................................1
Information about boards...........................................................................................................2
Features............................................................................................................................................3
External ports ............................................................................................................................4
Internal ports and connectors ....................................................................................................5
Hard disk connection .................................................................................................................6
LAN connector...........................................................................................................................6
PCI bus interrupts......................................................................................................................6
Settings with switches and jumpers...................................................................................................7
Recovering System BIOS - switch 2 ..........................................................................................7
Add-on modules ................................................................................................................................8
Installing and removing processors............................................................................................9
Upgrading main memory..........................................................................................................10
Installing network board with WOL...........................................................................................11
Replacing the lithium battery....................................................................................................12
Glossary..........................................................................................................................................13
A26361-D1321-Z120-1-7419
Introduction
Depending on the configuration chosen, some of the hardware components described
may not be available on your system board.
i
You will find further information in the "BIOS Setup" description.
Further information about drivers is provided in the readme files on the hard disk, on the supplied
drivers diskettes, on the "Drivers & Utilities" or on the "ServerStart" CD.
Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
Pay particular attention to text marked with this symbol. Failure to observe this warning
endangers your life, destroys the device, or may lead to loss of data.
!
Supplementary information, remarks, and tips follow this symbol.
i
Ê
Text which follows this symbol describes activities that must be performed in the order shown.
This symbol indicates that you must enter a blank space (press the Space Bar) at this point.
This symbol indicates that you must press the Enter key.
Ë
Ú
Text in this typefaceindicates screen outputs.
Text in this bold typefaceindicates the entries you make via the keyboard.
Text in italics indicates commands or menu items.
"Quotation marks" indicate names of chapters or terms.
Important notes
Store this manual close to the device. If you pass the device on to third parties, you should pass this
manual on with it.
Be sure to read this page carefully and note the information before you open the device.
!
You cannot access the system board components without first opening the device. How
to dismantle and reassemble the device is described in the Operating Manual
accompanying the device.
Please observe the safety information provided in the "Important notes" chapter in the
device's operating manual.
Incorrect replacement of the lithium battery may lead to a risk of explosion. It is therefore
essential to observe the instructions in the "Add-on modules" - "Replacing the lithium
battery" section.
A26361-D1321-Z120-1-7419
English - 1
Important notes
The shipped version of this board complies with the requirements of the EEC
directive 89/336/EEC "Electromagnetic compatibility".
Compliance was tested in a typical PC configuration.
When installing the board, refer to the specific installation information in the
Operating Manual or Technical Manual for the receiving device.
Connecting cables for peripherals must be adequately shielded to avoid interference.
Components can become very hot during operation. Ensure you do not touch
components when making extensions to the system board. There is a danger of burns!
!
The warranty is invalidated if the device is damaged during the installation or
replacement of system expansions. Information on which system expansions you can
use is available from your sales outlet or the customer service centre.
i
Information about boards
To prevent damage to the system board or the components and conductors on it, please take great
care when you insert or remove boards. Take great care to ensure that extension boards are slotted
in straight, without damaging components or conductors on the system board, or any other
components, for example EMI spring contacts.
Be especially careful with the locking mechanisms (catches, centring pins etc.) when you replace
the system board or components on it, for example memory modules or processors.
Never use sharp objects (screwdrivers) for leverage.
Boards with electrostatic sensitive devices (ESD) are identifiable by the
label shown.
When you handle boards fitted with ESDs, you must, under all
circumstances, observe the following points:
•
You must always discharge static build up (e.g. by touching a grounded
object) before working.
•
•
The equipment and tools you use must be free of static charges.
Remove the power plug from the mains supply before inserting or
removing boards containing ESDs.
•
•
Always hold boards with ESDs by their edges.
Never touch pins or conductors on boards fitted with ESDs.
2 - English
A26361-D1321-Z120-1-7419
Features
Features
The components and connectors marked are not necessarily present on the system board.
•
•
System board in µATX format
mPGA478 Intel processor Pentium 4 with 400 MHz Front Side.
Pentium 4 processors support MMX technology and Intel Streaming SIMD Extensions. The size and
frequency of first-level cache and second-level cache are dependent upon the processor used.
•
•
Intel chipset 845
Intel 82559ET LAN controller (10/100 Mbit/s) with RJ45 interface
WOL with Magic Packetꢁ is supported, as is booting from LAN with Bootix LAN BootP or Intel
PXE.
•
Analogue Devices AD1885 (AC'97) Audio Codec
internal: Stereo CD-In, Stereo AUX-In
external: Mono Micro-In, Stereo Line-In, Game/Midi port
Stereo Line-out / headphones
•
3 DIMM slots for 32 MB to 3 GB main memory (SDRAM memory modules meet the PC133
specification) with ECC
•
•
Flash BIOS
Power-on functions:
−
−
−
−
Wake on RTC
Wake on LAN
Wake on PCI Cards
Wake on USB
−
COM1 wake up support (standby)
•
•
Energy saving functions:
−
−
−
APM and ACPI (requires an operating system that supports ACPI)
Switching on/off, standby mode, suspend mode via on/off switch
Switching on/off via software
Security functions:
−
−
Processor serial number
Cover monitoring: cover monitoring reports when the cover has been opened without
authorisation.
−
−
−
−
−
System, Setup and Keyboard password
parallel and serial ports can be deactivated
Floppy disk write-protection via BIOS Setup
Boot hard disk virus warning function
Flash BIOS and EEPROMs (on the memory modules) virus protection function.
•
3 PCI slots
PCI slots support 3.3 V main and auxiliary voltages.
A26361-D1321-Z120-1-7419
English - 3
Features
•
•
1 AGP slot
The AGP slot supports 1x, 2x and 4x AGP mode. Only AGP boards with 1.5 V are supported.
IDE hard disk controller connected to PCI bus for up to four IDE drives
(e.g. IDE hard disk drives, ATAPI CD-ROM drives)
The IDE hard disk controller are ATA33/66/100, ultra DMA capable and support PIO modes 0-
4.
•
•
•
•
•
•
•
•
•
Floppy disk drive controller (possible formats: 720 KB, 1.44 MB, 2.88 MB)
The system board supports booting from a 120 MB IDE floppy disk drive.
Real-time clock/calendar with integrated battery backup
1 internal WOL interface
2 internal USB ports (C / D)
1 external parallel port (ECP- and EPP-compatible)
2 external serial ports (16C550 compatible with FIFO)
2 external PS/2 ports for keyboard and mouse
2 external USB ports (A / B)
External ports
1 3
4
5
6
8
2
7
9a9b9c
1 = PS/2 mouse port
2 = PS/2 keyboard port
3 = Serial port 1
8 = Game/Midi port
9a = Audio Line-Out
Headphones
4 = Parallel port
5 = Serial port 2
9b = Audio Line-In
9c = Audio Micro-In
6 = LAN connector
7 = USB ports A and B
The components and connectors marked are not necessarily present on the system board.
4 - English
A26361-D1321-Z120-1-7419
Features
Internal ports and connectors
1
2 3
4
5
6
7
8
DIMM 3
DIMM 2
DIMM 1
9
14
10
13
12 11
1 = Power supply ATX
2 = Floppy Disk Drive
9 = USB ports C / D *
10 = Wake On LAN
3 = IDE drives 3 and 4 (secondary)
4 = Connector for control panel and
loudspeaker
11 = CD audio input
12 = AUX audio input
13 = Power supply +12 V
5 = IDE drives 1 and 2 (primary)
6 = Voltage indicator LED
7 = Fan 2
14 = Fan 1 (e.g. for the processor)
8 = Cover monitoring
The components and connectors marked are not necessarily present on the system board.
A26361-D1321-Z120-1-7419
English - 5
Features
Hard disk connection
An ultra ATA/66 or ultra ATA/100 hard disk must be connected with a cable especially designed for
the ultra ATA/66or ultra ATA/100 mode.
Ê
Connect the end of the cable marked with blue to the system board.
LAN connector
This system board has an optional Intel 82550ET LAN controller which supports transfer speeds of
10 Mbit/s and 100 Mbit/s. The LAN controller is equipped with a 3 KB transmission and receiving
buffer (FIFO) and supports WOL function through Magic Packetꢁ.
It is also possible to boot a device without its own boot hard disk via LAN. Here Bootix LAN BootP
and Intel PXE are supported.
The LAN RJ45 connector is equipped with a yellow and a green LED (light emitting diode).
1 = Yellow indicator
2 = Green indicator
2
1
Yellow
Green
a connection exists (e.g. to a hub).
Link Mode:
the LAN connection is active.
WOL mode: a Magic PacketTM is being received.
PCI bus interrupts
The following table shows which PCI bus interrupts are assigned on the system board.
PCI bus interrupt
Component on system board:
PCI bus slot 1
B, C, D, A
C, D, A, B
PCI bus slot 2
D, A, B, C
PCI bus slot 3
A, B
D
H
E
B
AGP slot
First USB controller
Second USB controller
LAN controller
SMBus
B
AC'97 Audio
6 - English
A26361-D1321-Z120-1-7419
Settings with switches and jumpers
Settings with switches and jumpers
Switch 1 = must always be set to off
Switch 2 = System BIOS recovery
Switch 3 = must always be set to off
Switch 4 = must always be set to off
ON
1
2
3
4
The clock frequency of the processor is set automatically.
i
Recovering System BIOS - switch 2
Switch 2 enables recovery of the old system BIOS after an attempt to update has failed. To restore
the old system BIOS you need a Flash BIOS Diskette (please call our customer service centre).
On
The System BIOS executes from floppy drive A: and the inserted "Flash-BIOS-
Diskette" restores the System BIOS on the system board.
Off
Normal operation (default setting).
A26361-D1321-Z120-1-7419
English - 7
Add-on modules
Add-on modules
Exit Suspend mode, switch off the device and remove the power plug from the mains
supply, before carrying out any of the procedures described in this chapter!
Even when you have switched off the device, parts (e.g. memory modules, AGP and PCI
extension boards) are still supplied with power. The voltage indicator LED will glow if this
is the case.
!
All PCI slots support 3.3 V main and auxiliary voltages. AGP boards support 1,5 V main
and auxiliary voltages.
5
4
3
2
DIMM 3
DIMM 2
DIMM 1
1
6
7
1 = Socket for processor with heat sink
2 = Location bank 1 for main memory
3 = Location bank 2 for main memory
4 = Location bank 3 for main memory
5 = Lithium battery
6 = PCI slots 1, 2, 3
7 = AGP slot
8 - English
A26361-D1321-Z120-1-7419
Add-on modules
Installing and removing processors
2
3
1
4
5
A
Ê
Ê
Ê
Pull the lever in the direction of the arrow (1) and lift it as far as it will go (2).
Remove the old processor from the socket (3).
Insert the new processor in the socket so that the angled corner of the processor matches the
coding on the socket (A) with regard to the position (4).
The angled corner of the processor may be covered by the heat sink. In this case let
yourself be guided by the marking in the rows of pins on the underside of the processor.
!
Ê
Push the lever back down until it clicks into place (5).
A26361-D1321-Z120-1-7419
English - 9
Add-on modules
Upgrading main memory
These slots are suitable for DIMM format 32, 64, 128, 256, 512, 1024 MB SDRAM memory
modules.
Memory modules with different memory capacities can be combined.
You may only use unbuffered 3.3 V memory modules. Buffered memory modules are not
supported.
!
SDRAM memory modules must meet the PC133 specification.
Installing a memory module
2
2
Ê
Ê
Ê
Push the holders on each side of the memory compartment outwards.
Insert the memory module into the location (1).
At the same time flip the lateral holders upwards until the memory module snaps in place (2).
Removing a memory module
1
1
Ê
Ê
Push the clips on the right and left of the compartment outward (1).
Carefully remove the memory module from the compartment (2).
10 - English
A26361-D1321-Z120-1-7419
Add-on modules
Installing network board with WOL
Ê
Ê
Install the network board as described in the operating manual for your unit.
Push the WOL cable onto the WOL plug connector of the system board.
To use the WOL functionality of a network board the power supply must provide a
5 V auxiliary voltage of at least 1 A. If the system board was not already
incorporated in a device when you bought it you must check whether your power
supply can provide the auxiliary voltage.
i
You may find further information in the supplied description of the network board.
A26361-D1321-Z120-1-7419
English - 11
Add-on modules
Replacing the lithium battery
Incorrect replacement of the lithium battery may lead to a risk of explosion.
!
The lithium battery must be replaced with an identical battery or a battery type
recommended by the manufacturer (CR2032).
Do not throw lithium batteries into the household waste. They must be disposed of in
accordance with local regulations concerning special waste.
Ensure that you insert the battery the right way round. The plus pole must be on the top!
The following graphic representation is also valid if the lithium battery is built-in vertically.
1
+
+
3
2
+
+
Ê
Ê
Lift the contact (1) a few millimetres and remove the battery from its socket (2).
Insert a new lithium battery of the same type into the socket (3).
12 - English
A26361-D1321-Z120-1-7419
Glossary
Glossary
The technical terms and abbreviations given below represent only a selection of the full list of
common technical terms and abbreviations.
Not all technical terms and abbreviations listed here are valid for the described system board.
ACPI
Advanced Configuration and
Power Management Interface
Audio Codec '97
Accelerated Graphics Port
Audio Modem Riser
ISA
Industrial Standard Architecture
AC'97
AGP
AMR
AOL
APM
ATA
LAN
LSA
MCH
MMX
P64H
PCI
Local Area Network
LAN Desk Service Agent
Memory Controller Hub
MultiMedia eXtension
PCI64 Hub
Peripheral Component
Interconnect
Alert On LAN
Advanced Power Management
Advanced Technology
Attachment
BIOS
CAN
CPU
Basic Input Output System
Controller Area Network
Central Processing Unit
PXE
RAM
RAMDAC
Preboot eXecution Environment
Random Access Memory
Random Access Memory Digital
Analogue Converter
CNR
Communication Network Riser
RDRAM
RIMM
Rambus Dynamic Random
Access Memory
Rambus Inline Memory Module
C-RIMM
Continuity Rambus Inline
Memory Module
DIMM
ECC
EEPROM
Dual Inline Memory Module
Error Correcting Code
Electrical Erasable
Programmable Read Only
Memory
RTC
SB
SDRAM
Real Time Clock
Soundblaster
Synchronous Dynamic Random
Access Memory
FDC
Floppy Disk Controller
SGRAM
SIMD
Synchronous Graphic Random
Access Memory
FIFO
FSB
First-In First-Out
Front Side Bus
Streaming Mode Instruction
(Single Instruction Multiple Data)
System Management Bus
FWH
GMCH
Firmware Hub
Graphics and Memory Controller
Hub
SMBus
SVGA
Super Video Graphic Adapter
GPA
Graphics Performance
Accelerator
Inter Integrated Circuit
Instantly Available Power
Managed Desktop PC Design
I/O Controller Hub
USB
Universal Serial Bus
I2C
IAPC
VGA
WOL
Video Graphic Adapter
Wake On LAN
ICH
IDE
IPSEC
Intelligent Drive Electronics
Internet Protocol Security
A26361-D1321-Z120-1-7419
English - 13
|