SGH-t629
P O R T A B L E Q u a d - B a n d
T E L E P H O N E
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
UVFG8_WB_t629_110106_F8
©
2006Samsung TelecommunicationsAmerica, Inc. isaregistered
trademark of Samsung Electronics America, Inc. and its related
entities.
Printed in Korea.
GH68-11376A
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH
THEPRODUCT, THEPURCHASERTAKESTHEPRODUCT"AS
IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP
OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TOTHEPRODUCT.INADDITION,SAMSUNGSHALLNOTBE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR
ARISING FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS.
Table of Contents
Table of Contents
1
2
Table of Contents
3
4
Activating Your Phone
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available, and many others.
Installing the SIM Card
Important! The plug-in SIM card and its contacts can be easily damaged
by scratching or bending, so be careful when handling, inserting, or
removing the card.
Keep all SIM cards out of reach of small children.
1. If necessary, switch off the phone by holding down the
key until the power-off image displays.
2. If necessary, disconnect the Travel Adapter from the
information.
3. To remove the battery cover, press the ridged area on the
battery cover using your thumb (1) and gently slide it in
the direction of the arrow (2). Remove the battery cover.
4. Grasp the top of the battery with your finger and lift up in
the direction of the arrow. Remove the battery.
6
Activating Your Phone
5. Slide the SIM card into the SIM card socket so that the
card locks into place. Make sure the gold contacts of the
card face into the phone.
Note: When you need to remove the SIM card, slide it, as shown, and take
it out of the socket.
Section 1: Getting Started
7
6. Place the battery so that the 3 brass tabs on the end
align with the 3 brass prongs at the bottom of the battery
compartment (1). The arrow on the battery should be
pointing down. Press the battery down until it clicks into
place (2).
7. Replace the battery cover. Make sure that the battery is
properly installed before switching on the phone.
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery.
A Travel Adapter comes with your phone for charging
8
Activating Your Phone
the battery. Use only approved batteries and chargers.
Ask your local Samsung dealer for further details.
You can use the phone while the battery is charging, but
doing so will require additional charging time.
Note: You must fully charge the battery before using your phone for the
first time. A discharged battery recharges fully in approximately 2 hours.
1. With the battery in position in the phone, plug the
connector of the Travel Adapter into the jack on the side
of the phone.
Note: The following illustration is the incorrect method for connecting the
charger. If attempted, damage to the accessory port will occur therefore
voiding the phone’s warranty.
Section 1: Getting Started
9
2. Plug the adapter into a standard AC wall outlet.
Note: For connection to an electrical supply not located in the U.S., you
must use an adaptor of the proper configuration for the power outlet. Use
of the wrong adapter could damage your phone and void your warranty.
3. When charging is finished, unplug the Travel Adapter
from the power outlet and disconnect it from the phone.
Important!: You must unplug the Travel Adapter before you remove the
battery from the phone during charging; otherwise, the phone could be
damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, a warning tone sounds and the
“Warning low battery” message repeats at regular
intervals on the display. When this happens, your
phone turns off the backlight to conserve the remaining
battery power.
When the battery level becomes too low, the phone
automatically turns off.
10
Switching the Phone On or Off
Switching the Phone On or Off
1. Slide the phone open.
2. Press and hold the
key until the phone switches on.
3. If the phone asks for a PIN, enter the PIN and press the
OK soft key or the
key. For further details, see “PIN
The phone searches for your network and after finding
it, the name of your service provider appears on your
display. Now, you can make or receive calls.
Note: The display language is preset to English at the factory. To change
the language, use the Language menu. For further details, see
4. When you wish to switch off the phone, press and hold
the
key until the power-off image displays.
Setting Up Your Voice mail
For new users, follow the instructions below to set up
Voice mail:
1. Slide your phone open to access the keypad.
2. In Idle mode, press and hold the
key on the keypad.
3. Follow the tutorial to create a password, a greeting, and
your name.
Note: These steps may be different depending on your network.
Section 1: Getting Started
11
Accessing Your Voice mail
You can access your Voice mail by pressing and holding
the
key on the keypad or by going to the menu. To
access Voice Mail using the menu:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Highlight Messages and press the Select soft key or the
key.
3. Highlight Voice mail and press the Select soft key or the
key.
4. Highlight Call voice mail and press the OK soft key or
the
key. Your phone dials the specified voice mail
number. When connected, follow the voice prompts from
the Voice mail center.
Changing the Voice mail Number
Your SIM card gives you the default service number of
the Voice mail center. However, should you need to
change the number or add a second Voice server
number, use the following procedures:
1. In Idle mode, press the Menu soft key to access the
Menu mode.
2. Highlight Messages and press the Select soft key or the
key.
3. Highlight Voice mail and press the Select soft key or the
key.
4. Highlight Voice server number and press the OK soft
key or the
key. Highlight Voice mail and press the
OK soft key.
12
Setting Up Your Voice mail
5. Edit the number, then press the OK soft key. The number
will be saved.
6. Press the
key to return to Idle mode.
Section 1: Getting Started
13
14
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• View of Your Phone
• Keys
• Display Layout
• Get More Help
This section outlines some key features of your phone. It
also describes the screen and the icons that are displayed
when the phone is in use.
Section 2: Understanding Your Phone
15
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many
significant features. The following list outlines a few of
the features included in your phone.
• 1.3 Megapixel Camera and Camcorder
• Bluetooth® Wireless Technology
• Instant Messaging capability
• Voice Recognition capability
• Multimedia capability
• Fun & Apps feature provides my file, music player, games,
alarms, calendar, task list, calculator, world time, unit
conversion, timer, and stopwatch.
View of Your Phone
The following illustrations show the main elements of
your phone:
16
Keys
Keys
The following list correlates to the illustrations.
1. Used to listen to audio from your phone.
2. During a call, adjusts the earpiece volume.
In Idle mode with the phone open, adjusts the ring
volume. With the phone closed, turns on the external
display when held down.
When receiving a call with the phone open or closed,
mutes the ringer and can reject the call to Voice mail.
3.
Performs the functions indicated by the screen text on
the bottom line of the display.
4. OK/Select key. In Menu mode, selects the highlighted
menu options.
When the Left soft key shows Options, it is the
short-cut key to select the first option in the options list.
5. Makes or answers a call.
In Idle mode, recalls the last number dialed or received
when held down.
6. In Idle mode, accesses Voice mail when held down.
7. Enters special characters. Performs various functions.
8. The microphone used during phone calls and Voice note
recordings.
9. Enters numbers, letters, and some special characters.
10. The Cancel key deletes characters from the display.
In Menu mode, it returns you to the previous menu level.
Section 2: Understanding Your Phone
17
11. Ends a call. Also switches the phone on and off when
held down.
In Menu mode, cancels your input and returns the phone
to Idle mode.
12. Press to launch the camera/camcorder.
13. In Menu mode, scrolls through the menus and
Phonebook.
In Idle mode:
ⅷ
Up key: allows you to access the Camera or Camcorder
feature directly.
ⅷ
ⅷ
ⅷ
Down key: allows you to access your Contact list directly.
Left key: allows you to access Text messaging directly.
Right key: allows you to access Voice notes recording
directly.
When entering text, moves the cursor to the left or right,
depending on which side you press.
14. Display area where text and graphics are displayed.
18
Keys
15. Micro SD memory card slot. This expansion slot allows
you to insert a micro SD memory card to add additional
memory and storage capacity.
16. The external speaker used for the speakerphone and to
hear audio during a video playback.
17. The headset jack is used for the hands-free headset.
Plug your battery charger cable or your USB cable here.
18. Lens used to take photos and record video.
Section 2: Understanding Your Phone
19
Display Layout
The display has 4 areas:
Icons
Shows the received signal strength. The greater the
number of bars, the stronger the signal.
Appears when a micro SD memory card has been
inserted.
Appears when a new text message has been received.
Appears when a new Voice mail has been received.
Appears when a new multimedia message has been
received.
Appears when you set an alarm to ring at a specified time.
For details, see page “Alarm” on page 144.
Appears when you are out of your service area.
Appears when a call is in progress.
Appears when the Call Forwarding feature is active. For
details, see page “Call forwarding” on page 112.
20
Display Layout
Appears when Alert type is vibration or you set the phone
to vibrate when you receive a call.
When setting up from silent mode to vibration.
When setting up from silent mode to mute.
Shows the level of your battery. The more bars you see,
the more power you have remaining.
Appears when Bluetooth wireless technology is active.
Backlight
The backlight illuminates the display and the keypad.
When you press any key or open the phone, the
backlight turns on. It goes off when no keys have been
pressed within a given period of time, depending on
the setting in the Backlight menu.
The On setting is how long the keypad backlight is on.
You can select 15 seconds, 30 seconds, 1 minute, 3
minutes, or 10 minutes.
The Dim option is how much longer after the keypad
backlight goes off that the display remains lit. You can
select Off, 15 seconds, 30 seconds, 1 minute, or 3
minutes.
To specify your Backlight settings:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Settings icon.
Press the Select soft key or the
key to enter the
menu.
Section 2: Understanding Your Phone
21
3. Highlight the Display settings option and press the
Select soft key or the key.
4. Highlight the Backlight option and press the Select soft
key or the key.
5. Highlight the On option. Use the Left or Right Navigation
key to select the time that the backlight is on. You may
choose between 15 seconds, 30 seconds, 1 minute, 3
minutes, or 10 minutes.
6. Press the Down key to take you to the Dim option. Use
the Left or Right Navigation key to select the time that
Dimming mode is on. You may choose between Off, 15
seconds, 30 seconds, 1 minute, or 3 minutes.
7. Press the Save soft key to save your settings.
Get More Help
Get More Help is designed to show you some of the
features of your phone using t-zones. You can search
help files on the fly while traveling, at home or
anywhere, using help.wap.t-mobile.com.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Get More Help
icon. Press the Select soft key or the
key.
3. You will enter t-zones and the Get More Help menu will
be displayed.
The following options are available:
• Browse Help Topics: this option gives you a list of different
topics that you can select.
22
Get More Help
• Enter a Search: this option allows you to enter a keyword to
search on.
• About: this option offers general information about Get More
Help including concept and site design, copyright information,
and contact email address.
To access the browser options menu:
1. Press the Menu soft key to see the Browser Options.
2. Make a selection and press the Select soft key or the
key.
Note: The menus may vary, depending on your t-zones subscription.
For more information on browser options, see
Section 2: Understanding Your Phone
23
24
Section 3: Call Functions
Topics Covered
• Making a Call
• Adjusting the Call Volume
• Answering a Call
• Call Records
• Silent Mode
• Selecting Functions and Options
This section describes how to make or answer a call. It
also includes information on the features and
functionality associated with making or answering a
call.
Section 3: Call Functions
25
Making a Call
When the Idle screen displays, enter the number you
wish to dial and press the
key.
Note: When you activate the Auto redial option in the Extra settings menu,
the phone will automatically redial up to 10 times when the person does
not answer the call or is already on the phone, provided your call is not sent
Making an International Call
1. Press and hold the
key. The + character appears.
2. Enter the country code, area code, and phone number
and press the
key.
Correcting the Number
1. To clear the last digit displayed, press the
key.
2. To clear any other digit in the number, press the Left or
Right navigation key until the cursor is immediately to
the right of the digit to be cleared. Press the
can also enter a missing digit.
key. You
3. To clear the whole display, press and hold the
key.
Voice Dialing a Call
Your phone includes VoiceSignal advanced speech
recognition software that can be used to activate a
wide-variety of functions on your phone. You can
use VoiceSignal to make calls by speaking a number
(digit dialing) or by speaking the name of a contact
136 for more information.
26
Making a Call
Ending a Call
When you want to finish your call, briefly press the
key.
Redialing the Last Number
The phone stores the numbers of the calls you’ve
dialed, received, or missed if the caller is identified.
To recall any of these numbers:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Call records
icon. Press the Select soft key or the
key to enter
the menu.
Note: You can also access the call records of all calls, missed calls,
incoming calls, and outgoing calls by pressing the
key in Idle mode.
3. Select All calls and press the Select soft key or the
key.
4. Use the Up and Down keys to scroll through the
numbers and highlight the number you want.
5. To dial the number, press the
key.
Before you dial the number, you may press the Options
soft key for the following options:
•
Details: Displays details of the number including name,
number, and dates and times of calls.
•
•
Call back: Places a call back to the number.
Send message: Allows you to send a Text message,
Picture message, or Voice note to the number.
Section 3: Call Functions
27
• Save to phonebook: Stores the number in your
phonebook. Choose from New contact or Existing contact.
• Delete: Allows you to delete the Selected call record or All call
records.
Making a Call from the Phonebook
You can store phone numbers that you use regularly on
the SIM card or in the phone’s memory. These entries
are collectively called the Phonebook.
Once you have stored a number in the Phonebook, you
can dial it by pressing a few keys. You can also assign
your most frequently-used numbers to number keys
using the Speed Dial feature.
For further details about the Phonebook feature, see
Adjusting the Call Volume
During a call, if you want to adjust the earpiece
volume, use the Volume keys on the left side of the
phone.
Press the key to increase the volume level and the
key to decrease the level.
Muting Ringer and Rejecting Calls
When receiving a call, if you want to mute the ringer
without answering the call, press either volume key.
To reject a call and send it immediately to Voice mail,
press and hold either of the volume keys.
28
Answering a Call
Adjusting Ringer Volume
In Idle mode, you can also adjust the ring volume using
these keys while the phone is open.
Answering a Call
When somebody calls you, the phone rings and
displays the incoming call image.
The caller’s phone number, or name if stored in
Phonebook, displays.
1. If necessary, slide open the phone. Press the
key or
the Accept soft key to answer the incoming call.
If the Anykey answer option in the Extra settings menu
is activated, you can press any key to answer a call
except for the
key and the Reject soft key.
Note: To reject an incoming call, press the Reject soft key or
key.
Note: You can reject a call with your phone closed by pressing the volume
key on the side of the phone.
Section 3: Call Functions
29
2. End the call by closing the phone or pressing the
key.
Note: You can answer a call while using the Phonebook or menu features.
After answering the call, the phone returns to the function screen you were
using.
Call records
All incoming, outgoing and missed calls are listed in
the Call records. You can also view Call time.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Call records
icon. Press the Select soft key or the
key to enter
the menu.
Note: You can also access the call records of all calls, missed calls,
incoming calls, and outgoing calls by pressing the
key in Idle mode.
The following Call records options are available:
All calls
This menu lets you view the 90 most recent calls you
received, sent, and missed.
The number or name, if already stored in your
Phonebook, displays with the number of occurrences of
each number.
Note: at any time while you are in Call records, you may use the Left or
Right Navigation key to scroll between All calls, Missed calls, Incoming
calls, and Outgoing calls.
30
Call records
Missed calls
This menu lets you view the 30 most recent calls you
received, but did not answer.
The number and name, if already stored in your
Phonebook, displays with the number of occurrences of
each number.
Viewing Missed calls without Using the Menu
When you are unable to answer a call for any reason,
you can find out who is calling you, if this service is
available, so that you can call the person back.
The number of calls you have missed displays on the
idle screen immediately after a call is missed.
To view a missed call immediately:
1. If the phone is closed, slide the phone open.
2. Press the View soft key.
The number corresponding to the most recent missed
call displays, if available.
3. To scroll through the missed calls, press the Up or Down
Navigation key.
4. To call the number displayed, press the
key.
5. Press the Options soft key for the following options:
• Detail: Displays details of the number including name,
number, and dates and times of calls.
• Call back: Places a call back to the number.
• Send message: Allows you to send a Text message,
Picture message, or Voice note to the number.
• Save to phonebook: Stores the number in your
phonebook. Choose from New contact or Existing contact.
Section 3: Call Functions
31
• Delete: Allows you to delete the Selected call record or All call
records.
You can press the
key at any time to exit the Missed
calls feature.
Incoming calls
This menu lets you view the 30 most recent calls you
received.
The number and name, if already stored in your
Phonebook, displays with the number of occurrences of
each number.
Outgoing calls
This menu lets you view the 30 most recent calls you
dialed.
The number and name, if already stored in your
Phonebook, displays with the number of occurrences of
each number.
Delete all
This menu allows you to delete all of the records in
each call record separately, or you can delete all of your
call records at one time.
1. Highlight the type of calls you want to delete and press
the
key to make a check mark.
2. Press the Delete soft key to delete the calls.
3. When a confirmation message displays, press the Yes
soft key or
key to confirm.
32
Call records
Call time
This menu lets you view the time log for calls made and
received.
Note: The actual time invoiced by your service provider may differ from
times displayed due to network features and service plan.
The following time logs are available:
• Last call time: shows the length of your last call.
• Total incoming: shows the total length of all calls you have
received since the timer was last reset.
• Total outgoing: shows the total length of all calls you have
made since the timer was last reset.
• Life time: shows the total length of time for incoming and
outgoing calls. The length of call time must be at least 1 minute
to increment this field. This information cannot be cleared.
To reset a call timer:
1. Use the Up or Down navigation key to highlight the timer
you want to reset.
2. Press the Reset soft key. Enter the phone password and
then press the OK soft key or
key.
Note: The password is preset to “00000000” at the factory. To change this
Section 3: Call Functions
33
Silent mode
Silent mode is convenient when you wish to stop the
phone from making noise, in a theater for example.
In Idle mode, press and hold the
key until the
“Silent mode on” message and the Silent mode icon
display.
In Silent mode, instead of sounds, your phone will
vibrate. You can set how the phone acts to alert you to a
specific event while in Silent mode. See “Silent mode”
To exit and reactivate the previous sound settings, press
and hold the
key again until “Exit silent mode”
message appears. The Silent mode icon no longer
displays.
Selecting Functions and Options
Your phone offers a set of functions that allow you to
customize it. These functions are arranged in menus
and sub-menus, accessed using the two soft keys. Each
menu and sub-menu allows you to view and alter the
settings of a particular function.
Soft Keys
The roles of the soft keys vary depending on the
function you are currently using. The labels on the
bottom line of the display just above each key indicate
their current role.
34
Selecting Functions and Options
Press the Right soft
Press the Left soft key
for Menu mode.
key to access the
t-zones menu.
Selecting Options
To view the various functions and options available
and to select the one you want:
1. Press the appropriate soft key.
2. To select the function displayed or the option highlighted,
press the Select soft key or the
key.
3. To view the next function or highlight the next option on a
list, press the Down Navigation key.
4. To move back to the previous function or option on a list,
press the Up key.
5. To move back up one level in the menu structure, press
the Back soft key.
6. To exit the menu structure without changing the
settings, press the
key.
When you access a list of options, your phone
highlights the currently active option. If, however,
Section 3: Call Functions
35
there are only two options, such as On/Off or Enable/
Disable, your phone highlights the option that is not
currently active, so that you can select it directly.
Options During a Call
Your phone provides a number of control functions that
you can use during a call.
Switch to phone/Switch to headset (Bluetooth only)
You can use this option to switch between using your
Bluetooth headset and using your phone’s earpiece and
microphone without interrupting the call in progress.
Tip: This option is handy if your Bluetooth headset battery is running low
on talk power or is experiencing interference.
Note: This option does not appear when you are not using your Bluetooth
headset.
To switch from using your Bluetooth headset:
1. While in a call, press the Options soft key and highlight
the Switch to phone option.
2. Press the Select soft key or the
key. A message is
displayed. You can now talk with the other person using
your phone’s microphone and earpiece.
To switch to using your Bluetooth headset:
1. While in a call, press the Options soft key and highlight
the Switch to headset option.
2. Press the Select soft key or the
key. A message is
displayed. You can now talk with the other person using
your Bluetooth headset.
36
Selecting Functions and Options
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone
off, so that the other person cannot hear you.
Example: You wish to say something to a person in the room but do not
want the person on the phone to hear you.
To switch the microphone off temporarily:
1. Press the Options soft key and highlight the Mute
option.
2. Press the Select soft key or the
key. The other
person can no longer hear you. The Mute icon is
displayed.
To switch the microphone back on:
1. Press the Options soft key and highlight the Unmute
option.
2. Press the Select soft key or the
key. The other
person can hear you again.
Putting a Call on Hold
You can place the current call on hold whenever you
want. You can make another call while you have a call
in progress if your network supports this service.
To place a call on hold, simply press the Options soft
key, highlight the Hold call option, then press the
Select soft key or the
key. You can reactivate the
call whenever you want, by pressing the Resume soft
key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or look it
Section 3: Call Functions
37
up in the Phonebook.
2. Press the key to dial the second call.
The first call is automatically put on hold.
Or:
1. Press the Options soft key and select Hold call.
2. Make the second call in the normal way.
When you have an active call and a call on hold, you
may switch between the two calls, changing the one on
hold to active and placing the other on hold.
To switch between the two calls, simply press the
Options soft key and select Swap.
The current call is placed on hold and the call on hold is
reactivated so that you can continue conversing with
that person.
When you want to finish, end each call normally by
pressing the
key.
Muting or Sending Key Tones
These options allow you to turn the key tones off or on.
If the Mute keys option is selected, your phone does
not transmit the DTMF (Dual Tone Multi-Frequency)
tones of the keys, which allows you to press keys
without hearing annoying key tones during a call.
Note: To communicate with answering machines or computerized
telephone systems, the Send keys option must be selected.
38
Selecting Functions and Options
Making a Multi-Party Call
A multi-party call is a network service that allows up to
six people to take part simultaneously in a multi-party
or conference call.
Note: The number of callers is Network Dependent, so this number may
vary.
For further details about subscribing to this service,
contact your service provider.
Setting up a Multi-Party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The first
call is automatically put on hold.
3. To join the first participant to the multi-party call, press
the Options soft key or the
key and select Join.
Press the Select soft key or the
key.
4. To add a new person to the multi-party call, call the new
person in the normal way and then press the Options
soft key or the
the Select soft key or the
You can add incoming callers by answering the call and
key. Select the Join option and press
key.
pressing the Options soft key or the
key, and
selecting Join. Repeat as required.
Having a Private Conversation With One Participant
1. Press the Options soft key or the
the Split option. Press the Select soft key or the
key.
key and highlight
The list of call participants appears.
Section 3: Call Functions
39
2. Highlight a person you wish to talk privately with by
pressing the Up or Down Navigation key, and press the
Select soft key or the
key.
Now you can talk only to that person. The other
participants can continue to converse with each other.
3. To return to the multi-party call, press the Options soft
key or the
key and select Join. Press the Select
soft key or the
key.
All of the multi-party call participants can now hear each
other.
Dropping One Participant
1. Press the Options soft key and highlight Split or
Remove.
The list of call participants appears.
2. Highlight the person you want to remove or separate
from the call and press the OK soft key.
Searching for a Number in Phonebook
You can search for a number in the Phonebook during a
call.
1. Press the Options soft key.
2. Press the Down key to highlight the Phonebook option
and press the Select soft key or the
key.
The Phonebook menu appears in the display.
3. Press the Down key to highlight the Contact list option
and press the Select soft key or the
key.
The Contact list screen appears in the display.
40
Selecting Functions and Options
4. Enter the name that you wish to find in the textbox
located above the entries. If you enter the first few letters
of the name, the Phonebook entries are listed starting
with the first entry matching your input.
Or, use the Up or Down Navigation key to highlight the
contact that you desire.
5. To view the highlighted entry, press the Options soft key.
6. Highlight the View option and press the Select soft key
or the
key. The Contact is displayed.
7. Press the
key to dial the call.
For further details about the Phonebook feature, see
Send DTMF
You can use the Send DTMF option to send a key
string or number during a phone call. For example, you
can send a calling card number by DTMF while on a
call.
1. Press the Options soft key.
2. Highlight the Send DTMF option and press the Select
soft key or the
key.
3. Enter a number and press the OK soft key. The number is
sent.
Message
This option causes the Messages menu to appear in the
display. You can use this option to send, receive, and
review text and picture messages. See “Section 7:
Messages” on page 75 for more information.
Section 3: Call Functions
41
Menu
This option places your phone in main menu mode
without interrupting the call in progress. You can use
this option to access many of your phone’s features
during a call.
Using the Speakerphone
While on a call, you can use your Speakerphone by
following these steps:
1. Press the Spkr on soft key to turn the Speakerphone on.
2. To turn the Speakerphone off, press the Spkr off soft
key.
Call Waiting
You can answer an incoming call while you have a call
in progress, if this service is supported by the network
and you have set the Call waiting menu to Activate.
You are notified of an incoming call by a call waiting
information on setting up Call waiting.
To answer a call while you have a call in progress:
1. Press the Accept soft key or the
key to answer the
incoming call. The first call is automatically put on hold.
2. To switch between the two calls, press the Options soft
key, highlight Swap and press the Select soft key or the
key.
To end a call on hold, press the Options soft key and
select the End held call option. Then press the Select
soft key or the
key.
To end the current call, press the
key.
42
Menu Navigation
You can tailor the phone’s range of functions to your
needs using menus and sub-menus. Menus and sub-
menus can be accessed by scrolling using the
Navigation keys or by using the shortcuts.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Scroll using the Navigation keys to reach a main menu,
Settings for example. Press the Select soft key or the
key to enter the menu.
3. If the menu contains sub-menus, Security for example,
you can access them by pressing the Select soft key or
the
key after the sub-menu has been highlighted.
If the menu that you have selected contains further
options, repeat this step.
4. To scroll through the menus, press the Up or Down
Navigation keys.
5. To confirm the chosen setting, press the Select soft key,
or the
6. To return to the previous menu level, press the Back soft
key, or the key.
key.
7. To exit the menu without changing the settings, press the
key.
44
Menu Outline
Using Shortcuts
The menu items, such as menus, sub-menus, and
options, are numbered and can be accessed quickly by
using their shortcut numbers. For the main menus, you
can access any one of them by pressing the number
keys (1 to *) corresponding to their location on the
screen.
Example: Accessing the Security menu.
1. Press the Menu soft key.
2. Press the
key for Settings.
3. Press the
key for Security.
Menu Outline
The following list shows the menu structure and
indicates the number assigned to each option.
Note: If you use a SIM-AT card that provides additional services, the Fun &
Apps menu displays when you press Menu 6 for Applications. For further
details, see your SIM card instructions.
1
2
Voice notes
Call records
2.1 All calls
2.2 Missed calls
2.3 Incoming calls
2.4 Outgoing calls
2.5 Delete all
Section 4: Menu Navigation
45
2.6 Call time
3
t-zones
3.1 Home
3.2 Go to URL
3.3 Bookmarks
3.4 Saved pages
3.5 History
3.6 Clear cache
4
5
Instant Messaging
Messages
5.1 Create new
5.1.1
5.1.2
5.1.3
Text message
Picture message
Voice note
5.2 Inbox
5.3 Sentbox
5.4 Outbox
5.5 Drafts
5.6 Templates
5.6.1
Text templates
5.6.2
Picture message templates
5.7 Voice mail
5.7.1
Call voice mail
5.7.2
Voice server number
5.8 Delete all
5.9 Settings
5.9.1
Text message
5.9.2
Picture message
46
Menu Outline
5.0 Broadcast messages*
5.0.1
5.0.2
5.0.3
Receive
Channel
Language
5.* Memory status
6
Fun & Apps
6.1 My Files
6.1.1
6.1.2
6.1.3
6.1.4
6.1.5
6.1.6
6.1.7
Sounds
Images
Videos
Music
Other files
Memory card**
Memory status
6.2 Games
6.2.1
6.2.2
Get More Games
My games
6.3 Music player
6.4 Camera
6.4.1
6.4.2
6.4.3
6.4.4
6.4.5
6.4.6
Take and send
Record video
My photos
My videos
My Album
My Journal
6.5 Voice recognition
6.6 Organizer
6.6.1
6.6.2
6.6.3
6.6.4
6.6.5
Alarm
Calendar
Tasks
Calculator
World time
Section 4: Menu Navigation
47
6.6.6
6.6.7
6.6.8
Unit conversion
Timer
Stopwatch
7
8
Get More Help
Phonebook
8.1 Add new contact
8.2 Contact list
8.3 Group
8.4 Speed dial
8.5 My name card
8.6 Own number
8.7 FDN list
8.8 Management
8.8.1
8.8.2
8.8.3
8.8.4
8.8.5
Default saving
Copy all to
Sort by contacts
Delete all
Memory status
9
Settings
9.1 Time & Date
9.2 Phone settings
9.2.1
9.2.2
9.2.3
9.2.4
9.2.5
Language
Greeting message
Slide settings
Extra settings
Airplane mode
9.3 Display settings
9.3.1
9.3.2
9.3.3
Wallpaper
Info display
Interior display
48
Menu Outline
9.3.4
9.3.5
9.3.6
9.3.7
9.3.8
Brightness
Backlight
Dialing display
Calendar
Show caller Information
9.4 Sound settings
9.4.1
9.4.2
9.4.3
9.4.4
9.4.5
9.4.6
9.4.7
Incoming call
Keypad tone
Message tone
Power on/off
Slide tone
Silent mode
Extra tones
9.5 Bluetooth
9.5.1
9.5.2
9.5.3
9.5.4
9.5.5
9.5.6
9.5.7
Turn Bluetooth On/Off
My devices
My visibility
My phone name
Security modes
Features
Help
9.6 Network services
9.6.1
9.6.2
9.6.3
9.6.4
9.6.5
Call forwarding
Call barring*
Call waiting
Network selection*
Caller ID
9.7 Security
9.7.1
9.7.2
9.7.3
9.7.4
9.7.5
9.7.6
9.7.7
PIN check
Change PIN
Phone lock
Change password
Lock application
FDN mode
Change PIN2
Section 4: Menu Navigation
49
9.8 Software update
9.9 Reset settings
* Shows only if supported by your SIM card.
** Shows only if a memory card is inserted into the phone.
50
Section 5: Entering Text
Topics Covered
• Changing the Text Input Mode
• Using ABC Mode
• Using T9 Mode
• Using Number Mode
• Using Symbol Mode
This section outlines how to select the desired text input
mode when entering characters into your phone. This
section also describes how to use the T9 predictive text
entry system to reduce the number of key strokes
associated with entering text.
Section 5: Entering Text
51
Changing the Text Input Mode
When using your phone, you will often need to enter
text, such as when storing a name in your Phonebook,
creating your personal greeting or scheduling events on
your calendar. You can enter alphanumeric characters
by using your phone’s keypad.
Your phone has the following text input modes:
• ABC mode: this mode allows you to enter letters by pressing
the key labeled with the letter you want. How many times you
press the key determines which letter or number appears.
• T9 mode: this mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more than one
letter; for example, pressing
can enter J, K, or L. However,
the T9 mode automatically compares the series of keystrokes
you make with an internal linguistic dictionary to determine the
most likely word, thus requiring far fewer keystrokes than the
traditional ABC mode.
• Number mode: this mode allows you to enter numbers.
• Symbol mode: this mode allows you to enter symbols, such as
punctuation marks.
When you are in a field that allows characters to be
entered, you will notice the text input mode indicator
on the display.
Example: Writing a text message.
52
Changing the Text Input Mode
1. To change the text input mode, press the Right soft key.
2. Each time you press the Right soft key, a different Text
input mode indicator will be displayed at the lower right
corner of your display.
The following options are available:
: T9 mode
: ABC mode
: Number mode
: Symbol mode
3. When the text input mode indicator that you desire is
displayed, you may enter text in the text message box
using the selected text input mode.
Section 5: Entering Text
53
Using ABC Mode
To use ABC mode, use the number keys to enter your
text.
1. Press the key labeled with the letter you want:
ⅷ Once for the first letter
ⅷ Twice for the second letter
ⅷ And so on
2. Select the other letters in the same way.
ⅷ To enter periods or hyphens, press the
key. ABC mode
applies grammar rules to ensure that correct punctuation is
used.
ⅷ To shift case in ABC mode, use the
key. There are 3 cases:
Initial capital, Capital lock, and Lower case.
ⅷ You can move the cursor by using the Navigation keys. To
delete letters, press the
to clear the display.
key. Press and hold the
key
Note: The cursor moves to the right when you press a different key. When
entering the same letter twice or a different letter on the same key, just
wait for a few seconds for the cursor to move to the right automatically,
and then select the next letter.
Keys
54
Using ABC Mode
Section 5: Entering Text
55
Using T9 Mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes. This text
input mode is based on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word by
pressing the 2 to 9 keys. Press each key only once for
each letter.
Example: To enter “Hello” in T9 mode, press the 4, 3, 5, 5, and 6 keys.
The word that you are typing appears on the display. It
may change with each key that you press.
2. Enter the whole word before editing or deleting the
keystrokes.
3. When the word displays correctly, go to step 4.
If the word doesn’t display correctly, press the
key
to display alternative word choices for the keys that you
have pressed.
Example: Both “Of” and “Me” have the 6 and 3 keys. The phone displays
the most commonly used choice first.
4. Insert a space by pressing the
key and start entering
the next word.
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the word you
want to add, press the
key to display the alternative
words.
56
Using Number Mode
2. When you press the
key at the last alternative word,
the display shows Add on the bottom line. Press the Add
soft key or the key.
3. Enter the word you want to add using ABC mode.
4. Press the OK soft key or the key.
The word is added to the T9 dictionary and becomes a
word for the associated keypress series.
Note: This feature may not be available for some languages.
• To enter periods, hyphens, or apostrophes, press the
T9 mode applies grammar rules to ensure that correct
punctuation is used.
key.
• To shift case in T9 mode, use the
key. There are 3 cases:
Initial capital, Capital lock, and Lower case.
• You can move the cursor by using the Navigation keys. To delete
letters, press the
the display.
key. Press and hold the
key to clear
Using Number Mode
Number mode enables you to enter numbers into a text
message. Press the keys corresponding to the digits you
want to enter.
Using Symbol Mode
Symbol mode enables you to insert symbols and
punctuation marks into text.
1. To select a symbol, press the corresponding number key.
2. To display more symbols, press the Up or Down
Navigation key.
Section 5: Entering Text
57
3. To clear the symbol(s), press the
key. When the
input field is empty, this key returns the display to the
previous mode.
4. To insert the symbol(s) into your message, press the OK
soft key or the
key.
58
Section 6: Understanding Your
Phonebook
Topics Covered
• Storing a Number in the Phone’s Memory
• Storing a Number in the SIM Card
• Finding a Phonebook Entry
• Speed Dialing
• Editing a Caller Group
• Copying all SIM Phonebook Entries
• Deleting all of the Phonebook Entries
• My Name Card
• Finding My Own Phone Number
• Add FDN List
• Management
This section describes how to manage your contacts by
storing their name and number in your Phonebook. You
can save phone numbers to your phone’s memory or to
your SIM card.
Section 6: Understanding Your Phonebook
59
Storing a Number in the Phone’s Memory
The default for saving phone numbers to your
phonebook is your phone’s memory. You can also save
it to your SIM card or you can set your default so that
whenever a new phonebook entry is created, you will
be prompted to choose between Phone or SIM card.
how to change this setting.
Also, numbers that have been stored on your SIM card can
be copied to your phone’s memory.
Note: When you copy a phone number from your SIM card to your phone,
the number will appear twice in your Contact list.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Phonebook icon.
Press the Select soft key or the
key to enter your
Phonebook.
3. The Add new contact option will be highlighted. Press
the Select soft key or the key.
4. Enter a first name in the Name text box. Tab to the next
text box by pressing the Down key.
For further details about how to enter characters, see
“Using ABC Mode” on page 54.
5. Enter a last name in the text box.
6. Highlight a number Type by pressing the Up or Down
Navigation key, then enter a number in the text box.
The following types are available:
60
Storing a Number in the SIM Card
• Mobile: assigns the number entered to the Mobile entry.
• Home: assigns the number entered to the Home entry.
• Office: assigns the number entered to the Office entry.
• Fax: assigns the number entered to the Fax entry.
• Other: allows you to enter more detailed information for the
entry.
• Email: assigns the address to the email entry.
7. Continue to scroll down using the Down Navigation key
to enter Picture ID, Ringtone, Group, and Memo if
desired.
8. Press the Save soft key. The number is saved to your
phone and the new contact information is displayed.
9. To return to the Idle screen, press the
key.
Storing a Number in the SIM Card
The default for saving phone numbers to your
phonebook is your phone’s memory. To store a number
inyourSIMcard,youneedtochangetheDefaultSaving
option first.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Phonebook
icon. Press the Select soft key or the
key to enter
your Phonebook.
3. Scroll to Management by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
4. Highlight Default saving and press the Select soft key
or the
key.
Section 6: Understanding Your Phonebook
61
5. Highlight SIM card and press the Select soft key or the
key.
Note: You can also set the Default saving option to Ask on saving in the
Management menu. With this option, you will be prompted for storage
location each time you add a new contact. See “Default saving” on page
73 for more information.
Now that your phone is set up to store numbers to your
SIM card, follow this procedure to store a number.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Phonebook icon.
Press the Select soft key or the
key to enter your
Phonebook.
3. Highlight the Add new contact option and press the
Select soft key or the key.
4. Enter a name in the Name text box. Move to the next text
box by pressing the Down key.
For further details about how to enter characters, see
“Using ABC Mode” on page 54.
Note: Contacts stored to your SIM card do not have first and last names as
separate fields. Therefore, you will have to enter first and last name in the
name field if so desired.
5. Enter the phone number you want to store.
6. Continue to scroll down using the Down Navigation key
to enter Picture ID, Ringtone, and Group, if desired. To
select one of these options, press the
key.
62
Finding a Phonebook Entry
7. When you are finished, press the Save soft key or the
key. The number is saved in your SIM card.
After storing, the phone displays the Phonebook entry
you just created.
8. Press the Options soft key for the following options:
• Edit: allows you to edit the name and number fields in the
entry.
• Send message: allows you to send a message to the
selected number. You may choose between Text message,
Picture message, or Voice note.
• Call: allows you to call the number.
• Copy to phone: allows you to copy the number to your
Phone
• Send name card via: allows you to send your name card
via Text message, Picture message, or Bluetooth.
• Assign speed dial: allows you to assign a speed dial key
number to the selected Phonebook entry.
• Delete: allows you to delete the name and number from
Phonebook. You are asked to confirm that you wish to delete
the name and number by pressing the Yes soft key. To
cancel, press the No soft key.
9. To return to the Idle screen, press the
key.
Finding a Phonebook Entry
You can store phone numbers and their corresponding
names in your SIM card and phone’s memories. They are
physically separate but are used as a single entity, called
Phonebook.
Section 6: Understanding Your Phonebook
63
Depending on your particular SIM card, the maximum
number of phone numbers the SIM card can store may
differ.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Phonebook icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight Contact list and press the Select soft key or
the key.
Note: Steps 1-3 can be bypassed by pressing the Down navigation key
while in Idle mode.
4. Enter the first few letters of the name in the text box.
The Phonebook entries are listed, starting with the first
entry matching your input.
5. If needed, press the Up or Down Navigation key until the
entry you want is highlighted.
6. Once you have found the entry, press the
key to dial
the number, or press the Options soft key to access the
following Phonebook entry options:
• View: shows details of the Phonebook entry.
• Edit: allows you to edit the contents of your contact.
• Send message: allows you to send a message to the
selected number. You may choose between sending a Text
message, a Picture message, or a Voice note.
• New contact: takes you to the New Contact menu.
• Call: places a call to the number.
64
Finding a Phonebook Entry
• Copy to (phone or SIM card): allows you to copy the
contact to your Phone or SIM card.
• Copy all to (phone or SIM card): allows you to copy all
numbers stored on your SIM card to your phone, or on your
phone to your SIM card.
• Send name card via: allows you to send your name card
via Text message, Picture message, or Bluetooth.
• Assign speed dial: allows you to assign a speed dial key
number to the selected Phonebook entry.
• Delete: allows you to delete the selected name and number
from your Phonebook or delete all numbers. You are asked to
confirm that you wish to delete the name and number by
pressing the Yes soft key. To cancel, press the No soft key.
• Select language: allows you to select between English,
Français, or Español.
7. If you select the View option, press the Options soft key
after the contact information is displayed, for these
additional options:
• Edit: allows you to edit the name and number fields in the
entry. You can also add email address and notes.
• Send message: allows you to send a message to the
selected number. You may choose between Text messages,
Picture messages, or Voice notes.
• Call: places a call to the number.
• Copy to (phone or SIM card): allows you to copy the
number to your Phone or SIM card.
• Send name card via: allows you to send your name card
via Text message, Picture message, or Bluetooth.
• Assign speed dial: allows you to assign a speed dial key
number to the selected Phonebook entry.
Section 6: Understanding Your Phonebook
65
• Delete: allows you to delete the name and number from
Phonebook. You are asked to confirm that you wish to delete
the name and number by pressing the Yes soft key. To cancel,
press the No soft key.
After viewing one Phonebook entry, you can scroll
through all Phonebook entries by pressing the Right or
Left Navigation keys.
Speed Dialing
Once you have stored phone numbers from your
Phonebook list, you can set up to 8 speed dial entries and
then dial them easily whenever you want, simply by
pressing and holding the associated numeric key.
In Idle mode, to speed dial the numbers assigned to keys
(2 to 9), press and hold the appropriate key.
Setting Up Speed Dial Entries
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Phonebook icon.
Press the Select soft key or the
key to enter the
menu.
3. Scroll to Speed dial by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
4. Use the Up or Down Navigation key to select the number
key to which you wish to assign the speed-dialing
number. Select from the 2 to 9 keys, and press the Add
soft key or the
key.
66
Editing a Caller Group
5. Your Contact list will be displayed. Highlight the number
you wish to assign the speed dial to and press the Select
soft key or the
key.
6. The number will be assigned to your speed dial.
Note: Memory location 1 is reserved for your Voice mail server number and
cannot be changed.
Editing a Caller Group
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Phonebook icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Group option and press the Select soft key
or the key.
4. Scroll through the group list by pressing the Up or Down
Navigation key.
5. Highlight the group you want and press the Options soft
key.
6. Highlight the Edit option and press the Select soft key
or the
key.
7. To edit the Caller group name, modify the text in the
Name text box.
8. To change the image associated with the Caller group,
press the Down key to highlight the Picture ID icon.
Press the
key.
The following options are available:
Section 6: Understanding Your Phonebook
67
• Take picture: allows you to take a picture with your camera.
• My photos: allows you to choose a photo from My photos
folder.
• My downloads: allows you to choose a photo from your
downloaded images folder.
• Icons: allows you to choose from pre-defined icons
9. To change the ringtone associated with the Caller group,
press the Down key to highlight the Ringtone icon. Press
the
key.
The following options are available:
• Default sounds: allows you to choose between 16 different
melodies.
• My sounds: allows you to assign a Ringtone from your My
sounds folder.
• Voice list: allows you to assign a Voice note to this
phonebook entry.
• Music: allows you to assign a Ringtone from your Music list.
10. When you are finished, press the Save soft key. Your
Caller group settings will be saved.
11. Press the
key to return to Idle mode.
Copying all SIM Phonebook Entries
You can copy all SIM entries to the Phone using this
option. When you copy entries to the phone, duplicate
entries are created in your Phonebook.
1. In Idle mode, press the Menu soft key to access Menu
mode.
68
Deleting all of the Phonebook Entries
2. Using the Navigation keys, scroll to the Phonebook icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight Management and press the Select soft key or
the key.
4. Highlight Copy all to and press the Select soft key or the
key.
5. Highlight SIM card and press the Select soft key.
6. After receiving the Copy all to SIM? confirmation
message, press the Yes soft key.
Note: Options are available for entries stored to your phone that are not
available when stored to the SIM card. For details see “Storing a Number in
Deleting all of the Phonebook Entries
You can delete all your entries from your phone’s
memory, your SIM card, or both.
Important! Once Phonebook entries have been deleted, they cannot be
recovered.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Phonebook icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight Management and press the Select soft key or
the
key.
Section 6: Understanding Your Phonebook
69
4. Scroll to Delete all by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
5. Press the
key to place a check mark by the memory
location you want to empty; All, Phone, SIM card, or SIM
card (FDN).
You can remove the check mark by pressing the
again.
key
6. Press the Delete soft key. Enter your password and press
the OK soft key or the key.
Note: The password is preset to “00000000” at the factory. To change this
7. When the Delete all? confirmation message appears,
press the Yes soft key or the
key.
8. To cancel the deletion, press the No soft key.
9. When you are finished, press the
key to return to
Idle mode.
My Name Card
My Name Card allows you to create a virtual business
card.Oncecompleted,youcansendthecardtorecipients
as a V-card attachment.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Phonebook icon.
Press the Select soft key or the
key to enter the
menu.
70
Finding My Own Phone Number
3. Highlight My name card and press the Select soft key or
the
key.
4. My Name Card opens with the Name field highlighted.
5. Enter information in each of the fields as desired. Use the
Navigation keys to move between fields, then use the
keypad to enter information.
6. When finished, press the Options soft key and highlight
the Save option. Press the Select soft key or the
key.
7. Your Name Card will be saved.
Finding My Own Phone Number
Thisfunctionisamemoryaid,whichyoucanusetocheck
your own phone number if you need to do so.
You can assign a name to each of your own phone
numbers registered on your SIM card. You can also edit
the names and numbers. Any changes made here do not
in any way affect the actual subscriber numbers on your
SIM card.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Phonebook
icon. Press the Select soft key or the
key to enter
the menu.
3. Select the Own number option by pressing the Up or
Down Navigation key and press the Select soft key or
the
key.
Section 6: Understanding Your Phonebook
71
4. Highlight the Number 1 option and press the Options
soft key or the key.
5. Highlight the Edit option and press the Select soft key or
the key.
6. Your phone number is displayed. You may edit the name
and number if you wish. Press the Save soft key or the
key.
FDN list
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Phonebook icon.
Press the Select soft key or the
key to enter the
menu.
3. Select the FDN list option by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
4. Press the Add soft key and enter your 4-digit factory PIN
and press the OK soft key.
5. Enter the Contact Name, Number, Picture ID, Ringtone,
and Group name.
6. Press the Save soft key.
Management
The Management menu allows you to select where your
contacts will be saved, copy your SIM contacts to your
phone, sort your contacts, delete your contacts, or check
your memory status.
72
Management
Default saving
The Default saving option allows you to choose where
your contacts will be saved. The following options are
available:
• Phone: new phonebook contacts will be saved to your phone.
• SIM card: new phonebook contacts will be saved to your SIM
card.
• Ask on saving: you will be prompted to choose between Phone
or SIM card whenever you save a new contact.
Copy all to
ThisoptionallowsyoutocopyallcontactsfromyourSIM
card to your phone, or all your phone entries to your SIM
card. For more information, see “Copying all SIM
Sort by contacts
This options allows you to have your contacts sorted by
first name or last name.
Note: Contacts stored to your SIM card do not have first and last names as
separate fields. Therefore, they will be sorted on the first letter of the
name entered in the Name field.
Delete all
This option allows you to delete your contacts. You may
delete from Phone, SIM card, or SIM card (FDN). For
more information, see “Deleting all of the Phonebook
Section 6: Understanding Your Phonebook
73
Important! Once contact entries have been deleted, they cannot be
recovered.
Memory status
You can check how many names and numbers are stored
in the Phonebook, in both SIM card and the phone
memory. You can also see the capacity of both memories.
Your phone memory can hold up to 1000 contacts.
74
Section 7: Messages
Topics Covered
• Types of Messages
• Voice notes
• Text messages
• Picture messages
• Inbox
• Sentbox
• Outbox
• Drafts
• Templates
• Voice mail
• Delete all
• Settings
• Broadcast messages (SIM Dependent)
• Instant Messaging
• Memory status
This section describes how to send or receive different
types of messages. It also includes the features and
functionality associated with messaging.
Section 7: Messages
75
Types of Messages
Your phone provides the following message types:
• Voice notes
• Text messages
• Picture messages
• Voice mail messages
• Broadcast messages (SIM Dependent)
• Instant messaging
Voice notes
In this menu, you can record a Voice note of up to one
minute long and then immediately send it by Picture
message.
When you access this menu, a timer appears on the
screen.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Voice notes icon.
Press the Select soft key or the
key to enter the
menu.
Note: Steps 1and 2 can be bypassed by pressing the Right navigation key
while in Idle mode.
3. Press the Record soft key to start recording.
4. Record a memo by speaking into the microphone.
The display shows the elapsed time and the remaining
time at one time.
76
Voice notes
5. When you are finished, press the Stop soft key. Or, when
the recording time is expired, the display switches to the
next screen.
6. The Voice note is saved to your Voice list.
7. Press the Options soft key for the following options:
• Send to: allows you to send the Voice note.
• Play: plays back your Voice note.
• Re-record: discards the Voice note and enables you to
record another one.
• Set default destination: allows you to remove or edit the
default destination.
• Save: saves the Voice note.
8. To send the Voice note, press the Send soft key or select
the Send to option in the Options menu and press the
Select soft key or the
key.
9. Highlight one the following options:
• Recent recipients: allows you to select a phone number or
an email address from the last 30 destinations to which you
sent messages.
• Phonebook: allows you to select the phone number or email
address you want from your Phonebook. Use the
key to
check the selected entries.
• New recipient: allows you to enter a new entry.
• My Album: allows you to send the Voice note to My Album.
• My Journal: allows you to send the Voice note to My
Journal.
10. Press the Select soft key or the
key.
11. Select where you would like to send your Voice note and
it will be entered in the Send menu in a To field.
Section 7: Messages
77
12. To add another destination, select an empty To field and
press the Options soft key.
Note: When entering multiple destinations, you can also choose Add
recipient, Change recipient type, and Cancel options in addition to the
other send options.
13. Repeat from step 9. You can enter up to 10 destinations.
14. When you have finished entering the destinations, press
the Send soft key or the
key.
Your phone sends the message and saves the message
in the Sentbox.
Text messages
Short Message Service (SMS) allows you to send and
receive short text messages to and from other mobile
phones. In addition, your phone supports the
Enhanced Messaging Service (EMS), which enables you
to include simple pictures, melodies, and animated
images in your messages. To use this feature, you must
subscribe to your service provider’s message service.
When the Message icon ( ) appears, you have
received new text messages. When the memory is full,
the message icon will flash on your phone and you
cannot receive any new messages. You must delete a
message before you can receive additional messages.
Use the Delete option in each message box to delete
obsolete messages.
Create new
In this menu, you can write and send a text message.
78
Text messages
Creating a Text message
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Press the Select soft key or the
key to enter the
Messages menu.
3. Highlight the Create new option and press the Select
soft key or the key.
4. Highlight the Text message option and press the Select
soft key or the key.
Note: Steps 1–4 can be bypassed by pressing the Left navigation key
while in Idle mode.
5. Create your message.
6. When you finish typing your message, press the Options
soft key.
The following options are available:
• Insert from: allows you to insert Text templates, Phonebook,
or Bookmarks. The Text templates option allows you to
apply one of the preset message templates to the text. Select
one of the 10 items stored in the Text messages template
menu. PhoneBook allows you to add phone numbers or
email addresses to your message. Bookmarks allows you
to add Internet (web) addresses to your message.
• Add content: allows you to add a Picture, Animation, or
Melody to your message.
Section 7: Messages
79
• Attach: allows you to attach a Name card, Schedule,
Anniversary, Miscellaneous, or Task to your message.
• Save to Drafts: saves the message to your Drafts folder.
• Select language: allows you to set the language to English,
Français, or Español.
• Text style: allows you to format the size and style of the text.
For the Text size, Large, Medium, and Small size are available.
Text mode options are Normal, Underline, and Strikethrough.
The options for Bold and Italic are set by using the
place a check mark by them.
key to
• Back: returns you to the message selection screen to assign
a message type.
Note: Steps 6–7 can be bypassed by pressing the
finish entering your message.
key when you
7. Press the
Send key and highlight one of the
following options:
• Recent recipients: allows you to select from recipients of
your previous messages.
• Phonebook: allows you to select the phone number(s) you
want from your phonebook.
• Phone number: allows you to enter a number to send your
message to.
8. If you choose Recent recipients or Phonebook, use the
key to place check marks next to the entry or
entries you want your message sent to and press the
Send soft key.
9. If you choose Phone number, enter the number in the To
text box.
80
Picture messages
10. To add another destination, select an Add recipients
option and press the Add soft key.
Note: When entering multiple destinations, you can also choose Group and
Save to Drafts options in addition to the other send options.
11. Repeat from step 8. You can enter up to 20 destinations.
12. When you have finished entering the destinations, press
the
key.
Your phone sends the Text message. After sending, the
message is saved in the Sentbox.
Picture messages
This menu allows you to use the Multimedia Message
Service.
Picture Messaging is a messaging service that provides
delivery of personal multimedia messages from phone
to phone or from phone to email.
In addition to the familiar text content of text messages,
multimedia messages can contain images, graphics,
voice, and audio clips. A Picture Messaging message is
a multimedia presentation in a single file. It is not a text
file with attachments.
Using the Picture Messaging feature, your phone can
receive and send messages that contain multimedia
files, such as photos, videos, sounds and images you
downloaded from the Internet and Voice notes you
recorded. This function is available only if it is
supported by your service provider. Only phones that
Section 7: Messages
81
offer multimedia messaging features can receive and
display multimedia messages.
Create new
This menu allows you to create a new multimedia
message and send to one or multiple destinations.
Creating and Sending a Multimedia Message
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Press the Select soft key or the
key to enter the
Messages menu.
3. Highlight the Create new option and press the Select
soft key or the key.
4. Highlight the Picture message option and press the
Select soft key or the key.
5. Highlight Subject and press the
key.
6. Type the subject of your message and press the
key.
7. To add a picture or video clip, highlight the Image &
Video option and press the
8. Highlight Add Image or Add video and press the Select
soft key or the key.
key.
9. Select an image or video from the various options
available.
82
Picture messages
10. Press the Options soft key. Highlight the Add option and
press the Select soft key or the
key to add it to your
message.
11. To add a sound, highlight the Sound option and press the
key.
Note: if you attached a video clip to your message, you will not be able to
add Sound to the message.
12. Highlight the Add Sound option and press the Select
soft key or the
13. Select a Sound or Voice note from the various options
and press key. Press the Add soft key to add the
key.
sound to your message.
14. To add a message, highlight Text and press the
key.
15. Enter your message and press the
key.
16. When you have finished creating the message, press the
Send soft key.
17. Highlight one of the following options:
• Recent recipients: allows you to select from recipients of
your previous messages.
• Phonebook: allows you to enter the phone number you want
from your phonebook.
• New recipient: allows you to enter a new phone number
and/or an Email address.
• My Album: allows you to send the message to the My
Album folder.
• My Journal: allows you to send the message to My Journal.
Section 7: Messages
83
18. After selecting where to send your message, press the
key. Your phone sends the message.
Inbox
The Inbox stores messages that you have received. You
can tell what kind of message it is by the icon
displayed. If the icon envelope is open then the
message has been read, otherwise it will appear closed.
The following types of messages may appear in your
inbox:
Voice notes
Text messages
Multimedia messages
Push messages
When you enter the Inbox, the list of messages displays
with the sender’s phone numbers, or names, if
available in your Phonebook. After you have read the
message, the envelope in the icon will appear opened.
Note: By pressing the Left or Right Navigation keys, you may scroll
between Inbox, Sentbox, Outbox, and Drafts.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Press the Select soft key or the
key to enter the
Messages menu.
3. Highlight the Inbox option and press the Select soft key
or the key.
84
Inbox
Viewing a Text Message in Inbox
1. Select a text message from the list and press the
Options soft key.
The following options will appear:
• View: read the text message.
• Reply via: allows you to send a reply to the sender by
sending a Text message, Picture message, or Voice note.
• Call back: places a call to the selected number.
• Forward: allows you to forward a reply message to the
sender.
• Delete: deletes the selected text message or all messages.
• Move to phone or SIM card: allows you to move the
from the phone to SIM, or from the SIM to phone.
• Sort by: allows you to sort messages by Read/Unread, Date,
Name, Type, Size, or Subject.
• Lock: allows you to lock the message to protect it from being
deleted.
2. Highlight the View option and press the Select soft key
or the
key to read the message contents.
3. To scroll through the contents, press the Up or Down
Navigation key.
While reading a text message, you may choose the
following options by pressing the Options soft key:
• Reply via: allows you to send a reply to the sender by sending
a Text message, Picture message, or Voice note.
• Call back: places a call to the selected number.
• Forward: allows you to forward the message to another
number.
Section 7: Messages
85
• Save address: allows you to extract the sender’s number and
URL, email addresses or phone numbers from the message
text, so that you can save them in your phone’s memory.
• Save media: allows you to save the media in a message.
• Delete: allows you to delete the message.
• Move to SIM card: allows you to move the message from the
phone’s memory to the SIM card. This option is only available
for messages stored in the phone’s memory.
• Move to phone: allows you to move the message from the SIM
card to the phone’s memory. This option is only available for
messages stored in the SIM card.
• Lock: allows you to lock the message to protect it from being
deleted.
Viewing a Picture Message in Inbox
1. Highlight a picture message from the list and press the
Options soft key.
The following options will appear:
• View: read the picture message.
• Reply via: allows you to send a reply to the sender by
sending a picture message or Voice note.
• Reply all via: allows you to send a reply to All by sending a
picture message or Voice note.
• Call back: places a call to the selected number.
• Forward: allows you to forward the picture message to
another recipient.
• Delete: deletes the selected picture message or all
messages.
• Sort by: allows you to sort messages by Read/Unread, Date,
Name, Type, Size, or Subject.
86
Inbox
• Lock: allows you to lock the message to protect it from being
deleted.
• Properties: shows you information about the message, such
as time and Date the message was received, the sender’s
email address or phone number, recipient’s email address or
phone number, Cc, Message size, Priority, and Msg class.
2. Highlight the View option and press the Select soft key
or the
key to read the message contents.
3. To scroll through the contents, press the Up or Down
Navigation key.
While viewing a picture message, you may choose the
following options by pressing the Options soft key:
• Reply via: allows you to send a reply to the sender by sending a
picture or text message or a Voice note.
• Reply all via: allows you to send a reply to All by sending a
picture message or Voice note.
• Call back: places a call to the selected number.
• Forward: allows you to forward the message to another
number.
• Replay: allows you to view the message again.
• Save address: allows you to extract the sender’s number and
URL, email addresses or phone numbers from the message
text, so that you can save them in your phone’s memory.
• Save media: allows you to save the picture or video to your My
downloads folder.
• Delete: allows you to delete the message.
• Lock: allows you to lock the message to protect it from being
deleted.
Section 7: Messages
87
• Properties: shows you information about the message, such as
Subject, who the message was From, Message size,
Transaction ID, Msg class, MMS version, who the message was
To, Priority, and Date and time message was received.
Viewing a Voice Note in Inbox
1. Highlight a Voice note from the list and press the Options
soft key.
The following options will appear:
• Play: listen to the Voice note and view message details.
• Reply via: allows you to send a reply to the sender by
sending a Voice note, text message, or picture message.
• Reply all via: allows you to send a reply to All by sending a
Voice note or picture message.
• Call back: places a call to the selected number.
• Forward: allows you to forward the Voice note to another
recipient.
• Delete: allows you to delete the selected Voice note or
multiple messages.
• Sort by: allows you to sort messages by Read/Unread, Date,
Name, Type, Size, or Subject.
• Lock: allows you to lock the Voice note to protect it from being
deleted.
• Properties: shows you information about the Voice note,
such as time and Date the Voice note was received, the
sender’s email address or phone number, recipient’s email
address or phone number, Cc, Voice note size, Priority, and
Msg class.
2. Highlight the Play option and press the Select soft key or
the
key to listen to the message contents.
88
Inbox
While listening to the message, you may choose the
following options by pressing the Options soft key:
• Reply via: allows you to send a reply to the sender by sending a
Voice note, text message, or picture message.
• Reply all via: allows you to send a reply to All by sending a
Voice note or picture message.
• Call back: places a call to the selected number.
• Forward: allows you to forward the message to another
number.
• Replay: allows you to listen to the Voice note again.
• Save address: allows you to extract the sender’s number and
URL, email addresses or phone numbers from the message
text, so that you can save them in your phone’s memory.
• Save media: allows you to save the message to different areas
or to your vCard or vCalendar.
• Delete: allows you to delete the Voice note.
• Lock: allows you to lock the message to protect it from being
deleted.
• Properties: shows you information about the message, such as
time and Date the message was received, the sender’s email
address or phone number, recipient’s email address or phone
number, Cc, Message size, Priority, and Msg class.
Viewing a Push Message in Inbox
A Push message is a way of delivering content (e.g.
images, ringtones, etc.) to mobile phones that are WAP
enabled. With a Push message you don't actually send
the content in the text message, you direct the mobile
phone where to get it from.
1. Select a Push message from the list and press the
Options soft key.
Section 7: Messages
89
The following options will appear:
• View: listen to the Voice note and view message details.
• Delete: allows you to delete the selected message or all
messages.
• Sort by: allows you to sort messages by Read/Unread, Date,
Name, Type, Size, or Subject.
• Protection: allows you to lock the message to protect it from
being deleted.
2. Highlight the View option and press the Select soft key
or the
key to view the message contents.
While reading the message, you may choose the
following options by pressing the Options soft key:
• Go to URL: allows you to go to the website on your WAP
browser.
• Save address: allows you to extract the sender’s number and
URL, email addresses or phone numbers from the message
text, so that you can save them in your phone’s memory.
• Delete: allows you to delete the message.
• Protection: allows you to lock the message to protect it from
being deleted.
Viewing a Message When You Receive It
When a new multimedia message comes in, the display
shows the Picture Messaging Message icon.
1. Press the View soft key to view the message.
Press the Exit soft key if you want to view the message
later in the Inbox.
2. Press the Options soft key or the
key to access the
various options described above.
90
Sentbox
3. When you are finished, press the
key.
Sentbox
This message box stores messages that you have sent.
When you enter this menu, the list of messages in the
box displays with the recipients’ phone numbers or
names, if available in your Phonebook.
Note: By pressing the Left or Right Navigation keys, you may scroll
between Inbox, Sentbox, Outbox, and Drafts.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Press the Select soft key or the
key to enter the
Messages menu.
3. Highlight the Sentbox option and press the Select soft
key or the key.
4. Select a message from the list and press the Options
soft key.
5. Highlight the View option and press the Select soft key
or the
key to view the message contents.
6. To scroll through the contents, press the Up or Down
Navigation key.
While viewing a message, you can choose different
options by pressing the Options soft key.
Section 7: Messages
91
Outbox
This message box stores messages that you have
attempted to send but have not actually been sent yet.
When you enter this menu, the list of messages in the
box displays with the recipients’ phone numbers or
names, if available in your Phonebook.
Note: By pressing the Left or Right Navigation keys, you may scroll
between Inbox, Sentbox, Outbox, and Drafts.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Press the Select soft key or the
key to enter the
Messages menu.
3. Highlight the Outbox option and press the Select soft
key or the key.
4. Select a message from the list and press the Options
soft key.
5. Highlight the View option and press the Select soft key
or the
key to view the message contents.
6. To scroll through the contents, press the Up or Down
Navigation key.
While reading a message, you can choose different
options by pressing the Options soft key.
92
Drafts
Drafts
This message box stores messages that you may want to
edit or send at a later time.
When you enter this menu, the list of messages in the
box displays.
Note: By pressing the Left or Right Navigation keys, you may scroll
between Inbox, Sentbox, Outbox, and Drafts.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Press the Select soft key or the
key to enter the
Messages menu.
3. Highlight the Drafts option and press the Select soft key
or the key.
4. Select a message from the list and press the Options
soft key.
5. Highlight the Edit option and press the Select soft key or
the
key to edit the message contents.
• For a Text Message, press the
Send key.
• For a Picture Message, press the Send soft key.
While viewing a draft message, you can choose
different options, depending on the type of message,
by pressing the Options soft key.
Templates
Besides entering message text using the keypad keys,
you can speed message composition by including
copies of stored text (Templates) in your message.
Section 7: Messages
93
Text Templates
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Press the Select soft key or the
key to enter the
Messages menu.
3. Highlight the Templates option and press the Select soft
key or the key.
4. Highlight Text templates and press the Select soft key
or the key.
5. Highlight the sentence you wish to have inserted and
press the key. The sentence will be placed in a text
message display.
You can choose from ten predefined sentences that you
can add to your text message to save time.
6. Continue to write your text message. For more
information, see "Creating a Text message" on page 79.
Picture Templates
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Press the Select soft key or the
key to enter the
Messages menu.
3. Highlight the Templates option and press the Select soft
key or the key.
4. Highlight Picture message templates and press the
Select soft key or the key.
5. Highlight the picture message template and press the
key to view the image.
94
Voice mail
6. To send the highlight image in a message press the
Options soft key, highlight Send message and press
or press the Send key.
7. Select a recipient or send to My Album or My Journal.
Voice mail
This menu provides you with a way of accessing your
voice mailbox, if provided by your network.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Press the Select soft key or the
key to enter the
Messages menu.
3. Highlight the Voice mail option and press the Select soft
key or the key.
The following options are available:
• Call voice mail: displays the pre-loaded Voice mail number
received from your service provider. Press the OK soft key or
the
key to listen to your messages. You can also connect
to the voice server by pressing and holding the
mode.
key in Idle
• Voice server number: allows you to change the Voice mail
server number, if necessary.
Note: Voice mail is a network feature. Please contact your service provider
for further details.
Section 7: Messages
95
Delete all
This menu allows you to delete all of the messages in
each message box. Or, you can also delete all of your
messages in all message boxes at one time.
1. To select a message box to clear, press the Up or Down
Navigation key. To delete all of your messages, select the
Delete all option.
2. To place or remove a check mark, press the
key.
3. Press the Delete soft key to delete the marked objects.
4. After you receive a confirmation message, press the Yes
soft key to delete the selected message box contents.
Otherwise, press the No soft key.
Settings
In this menu, you can set up default text message and
picture message information. The last setting you
accessed is automatically activated for sending
subsequent messages.
Text message
• Service center: allows you to store or change the number of
your message center, which is required when sending
messages. You must obtain this number from your service
provider.
• Destination address: allows you to enter a number that you
would like to send all messages to. You can still message
others, but this number will always appear in the Send list.
• Validity period: allows you to set the length of time your text
messages are stored at the message center while attempts are
made to deliver them.
96
Broadcast Messages (SIM Dependent)
• Reply path: allows the recipient of your message to send you a
reply message using your message center, if your network
supports this service.
• Delivery report: when this option is check marked, the network
informs you whether or not your message has been delivered.
Picture message
The following options are used to set Send and Receive
settings for Picture messages.
Send settings
• Delivery report: when this option is enabled, the network
informs you whether or not your message has been delivered.
• Read reply: when this option is enabled, your phone sends a
request for a reply along with your message to the recipient.
• Priority: you can select the priority level of your messages.
• Expiry date: The expiration date is how long the message
receiver has to retrieve the message.
• Delivery time: you can set a delay time before the phone sends
your messages.
Retrieve settings
• Anonymous reject: you can set your phone to automatically
reject anonymous messages.
• Ads allowed: allows you to receive advertisements.
• Report allowed: you can set the option to receive a delivery
report.
Broadcast Messages (SIM Dependent)
This network service allows you to receive text
messages on various topics, such as the weather or
traffic.
Section 7: Messages
97
Please contact your service provider for further details.
Memory status
You can check the amount of the memory being used
and the memory remaining for text, picture, broadcast,
and push messages.
The display shows the total space including the used
and free space. You can also view how much space is
currently occupied by each message box.
Instant Messaging
Instant Messaging (IM) is a way of sending short,
simple messages that are delivered immediately to
users online at that moment.
Before using this feature, you need to subscribe to a
messenger service. For further details, contact your
service provider.
Starting your Instant Messaging
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Instant
messaging icon. Press the Select soft key or the
key to enter the menu.
3. Highlight the messenger service to which you subscribed
using the Up or Down Navigation key and press the
Select soft key or the
key.
4. Highlight the Sign on, Connect, or Sign in option,
depending on your messenger service and press the
Select soft key or the
key.
98
Instant Messaging
5. Enter the required sign on information such as ID and
password and press the OK soft key.
Note: The information required for sign on will vary depending on the
instant messaging provider you are using.
6. Follow the on-screen instructions to read, reply to,
compose, send, and manage your IM account.
Using the Instant Messenger Menu
The user can look at next menu after select "IM
application"
On the sign-on screen of the messenger, press the
Options soft key to access the following options:
• Sign on/Connect/Sign in: allows you to login to your IM
account.
• Saved conversations: The preserved content of the
conversation is seen.
• Offline conversations: Content of the conversation are seen up
to ten when the conversation do not bring to a close of the
online and it logs out without being ended.
• Settings: allows you to change your Default community and
Community settings.
• Help: provides various help information depending on the
community you have selected.
Section 7: Messages
99
100
Section 8: Changing Your Settings
Topics Covered
• Time & Date
• Phone settings
• Display settings
• Sound settings
• Bluetooth
• Network services
• Security
• Software update
• Reset settings
This section explains the sound and phone settings for
yourphone.Itincludesdisplaysettings,securitysettings,
and extra settings associated with your phone.
Section 8: Changing Your Settings
101
Time & Date
This menu allows you to change the current time and
date displayed.
The following options are available:
• Set time: allows you to change the hour and minute.
• AM/PM: allows you to set either AM or PM.
• Time format: allows you to select whether your time is
displayed in 12 hours or 24 hours format.
• Set date: allows you to enter the month, day, and year.
• Date format: allows you to select MM/DD/YYYY, DD/MM/YYYY,
or YYYY/MM/DD format.
• Week start day: allows you to specify which day (Sunday or
Monday) to consider as the first day of the week.
• Auto update: allows you to receive time information from your
service provider’s network.
• On: the phone automatically updates the time and date
according to the current time zone using the network
service.
• Confirm first: the phone asks for a confirmation before the
update.
• Off: you need to manually set the time and date according to
the current time zone using the Set time menu.
To change your time and date settings:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Settings icon.
Press the Select soft key or the
key to enter the
menu.
102
Phone settings
3. Highlight the Time & Date options and press the Select
soft key or the
key.
4. Use the Up or Down Navigation key to select the option
you wish to change.
5. To set Set time or Set date, use the Left or Right
navigation key to position the cursor over the number
you wish to change.
6. Enter the desired number.
7. To change other options, use the Left or Right navigation
key to select the desired setting.
8. When you are finished changing your settings, press the
Save soft key to save your settings. Otherwise press the
Back soft key.
Note: Automatic updates of time and date do not change the time you have
set for alarm settings or calendar memos.
Phone settings
You can customize various phone settings.
Language
This menu allows you to select a display language for
Text language and Input mode. Choose from English,
Français, or Español or choose Automatic selection.
Greeting message
This menu allows you to set a greeting to be displayed
briefly when the phone is switched on.
Section 8: Changing Your Settings
103
For details about entering characters, see "Section 5:
Slide settings
This menu allows you to change the settings for the
slider on the phone.
To change your time and date settings:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Settings icon.
Press the Select soft key or the
key to enter the
menu.
3. Select Phone settings and press the Select soft key.
4. Highlight Slide settings and press the Select soft key or
the
key.
5. In the Up option, choose Accept call to connect a call
when sliding the phone up, or None to slide open the
phone without connecting the incoming call. Use the
Right or Left Navigation keys to select options.
6. In the Down option, choose Stop operation to end the
call when the slider is closed, or Continue operation to
continue the call when the slider is closed. Use the Right
or Left Navigation keys to select options.
7. Press the Save soft key to save settings, or the Cancel
soft key to return to the previous menu.
8. Press the
key to return to the main menu.
104
Phone settings
Extra settings
You can turn the automatic redialing or answering
features on or off.
1. To turn a feature on, highlight the feature and press the
key. A check mark displays in front of the option.
2. To turn a feature off, highlight the checked feature and
press the
key. The check mark no longer displays.
The following options are available:
• Auto redial: when this option is checked, the phone makes
up to ten attempts to redial a phone number after an
unsuccessful call.
Note: The interval between call attempts varies.
• Anykey answer: when this option is checked, you can
answer an incoming call by pressing any key, except the
key or the Reject soft key. To reject the call, press the
or the Reject soft key. When this option is unchecked, you
must press the key or Accept soft key to answer a call.
key
3. When you have finished changing your settings, press
the Save soft key to save your settings. Otherwise press
the Back soft key.
Airplane mode
Use Airplane mode when on an airplane or in an area
where making or receiving calls or data transmission
are prohibited. When activated you cannot send or
receive calls or access online information. However,
you can access the following features, such as:
• Games
Section 8: Changing Your Settings
105
• Music
• Notepad
• Voice Memos
Display settings
In this menu, you can change various settings for the
display or backlight.
Wallpaper
This menu allows you to change the background image
to be displayed in Idle mode.
The following options are available:
• Get more wallpaper: this option takes you to t-zones where
you can download wallpapers.
Note: When downloading wallpapers, charges may apply.
• Default wallpapers: allows you to choose from a list of
wallpapers included with your phone.
• My downloads: allows you to choose a photo from your
downloaded images folder.
• My photos: allows you to choose a photo from My photos
folder.
To change the background image:
1. After selecting one of the above options, scroll through
the list by pressing the Navigation keys and select an
image.
2. Highlight your wallpaper choice and press the
key.
3. Press the Select soft key.
106
Display settings
4. The image will be saved as your wallpaper.
Info display
This menu allows you to set Text style and Text color.
Press the Left or Right Navigation key to change the
settings.
Interior display
Youcanselectthecolorofthemenusdisplayed. Thereare
two different patterns to choose from.
Brightness
You can adjust the display brightness to see it better in
different lighting conditions.
Press the Left or Right Navigation key or press the
Volume keys to adjust the brightness.
Backlight
In this menu, you can select the length of time that the
keypad backlight is on and how much longer the
display is illuminated before going off.
The On setting is how long the keypad backlight is on.
You can select 15 seconds, 30 seconds, 1 minute, 3
minutes, or 10 minutes.
The Dim option is how much longer after the keypad
backlight goes off that the display remains lit. You can
select Off, 15 seconds, 30 seconds, 1 minute, or 3
minutes.
For example, if you set On for 30 seconds and Dim for
15 seconds, after 30 seconds the backlight on the keys
Section 8: Changing Your Settings
107
would turn off and 15 seconds later the display light
would turn off.
Press the Left or Right Navigation key to adjust the
settings.
Dialing display
This menu allows you to select the size, color and
background color of your dialing font.
To change the size of the font:
1. Highlight the Font size option and press the Select soft
key or the
key.
2. Use the Left or Right navigation key to select between
Large, Medium, or Small.
3. Press the Save soft key or the
key to save your
key.
change. Otherwise, press the
To change the color of the font:
1. Highlight the Font color option and press the Select soft
key or the key.
2. Use the Left or Right navigation key to select either
Basic (black), Rainbow, or Monochrome.
3. Press the Save soft key or the
key to save your
key.
change. Otherwise, press the
To change the background color:
1. Highlight the Background color option and press the
Select soft key or the key.
2. Use the Left or Right navigation key to select either
Steelblue, Royalblue, Blueblack, Purple, Plum, Peru,
Goldenrod, Yellowgreen, Lightgreen, or Teal.
108
Sound settings
3. Press the Save or the
Calendar
key to save your settings.
This menu allows you to set the current month’s
calendar for the wallpaper.
1. Use the Up or Down Navigation key to choose from On
or Off.
2. Press the Select soft key or the
key to save your
settings.
Show caller information
By turning this option on, when you miss a call, caller
information such as name will be displayed on your
display when your missed calls are listed.
Sound settings
You can customize various sound settings for your
phone.
Incoming call
Get More MegaTones
Using the Get More MegaTones option, you can access
the website preset by T-Mobile and download new
sounds.
Get More HiFi Ringers
Using the Get More HiFi Ringers option, you can
access the website preset by T-Mobile and download
new HiFi Ringers.
Section 8: Changing Your Settings
109
Note: When downloading MegaTones® or HiFi Ringers TM, charges may
apply.
Ringtone
This menu allows you to select a ring melody. Highlight
Ringtone and press the
key. Use the Up or Down
key and select My sounds, Voice list, Music, or Default
sounds. Then use the
key to select a ringtone.
Volume
This menu allows you to adjust the ring volume to one
of five levels.
Use the Right or Left navigation key to increase or
decrease the volume.
Alert type
This menu allows you to specify how you are to be
informed of incoming calls. Use the Right or Left
navigation key to select a ring tone.
The following options are available:
• Melody: the phone rings using the ring melody selected in the
Ringtone menu.
• Vibration: the phone vibrates but does not ring.
• Vibration then melody: the phone vibrates 3 times and then
starts ringing.
Keypad tone
This menu allows you to select the key tone and
volume that the phone sounds when you press a key.
110
Sound settings
Use the Right or Left navigation key to make your
selections.
To turn off the sound, select Off.
Message tone
This menu allows you to set the message tone for
incoming Text, Picture, and Broadcast messages. You
can set the Tone, Alert type, and Repetition.
Use the Right or Left navigation key to make your
selections.
Power on/off
This menu allows you to select the melody that the
phone sounds when it is switched on and off.
To turn off the sound, select Off.
Slide tone
This menu allows you to select the melody that the
phone sounds when you open or close your phone.
To turn off the sound, select Off.
Silent mode
This menu allows you to select whether or not your
phone will vibrate while in quiet mode. You may
choose between Vibration and Mute.
Extra tones
You can customize additional tones for the phone.
1. To turn a given tone on, press the
key. A check mark
displays in front of the option.
Section 8: Changing Your Settings
111
2. To turn a given tone off, press the
key. The check
mark no longer displays in front of the option.
The following options are available:
• Minute minder: sets whether or not the phone beeps every
minute during an outgoing call to keep you informed of the
length of your call.
• Connection tone: sets whether or not the phone beeps when
your call is connected to the system.
• Alerts on call: sets whether or not you receive tones when a
message arrives while you are on a call.
Network services
Call forwarding
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to forward your business calls to a colleague while
you are on holiday.
To set your call forwarding options:
1. Select a call forwarding option by pressing the Up or
Down Navigation key and then press the Select soft key
or the
key.
The following options are available:
• Forward always: all calls are forwarded.
• Busy: calls are forwarded when your phone is busy.
• No reply: calls are forwarded when your phone is not
answered.
112
Network services
• Unreachable: calls are forwarded when you are not in an
area covered by your service provider or when your phone is
switched off.
• Cancel all: all call forwarding options are canceled.
2. Select the type of calls, Voice calls or Data calls, by
pressing the Up or Down Navigation key, and then press
the Select soft key or the
key.
The current status displays. If the option has already
been set, the number to which the calls are forwarded
displays.
3. To activate call forwarding, select Activate by using the
Left or Right navigation key.
4. To deactivate call forwarding, select Deactivate by using
the Left or Right navigation key.
5. Enter the number to which the calls are to be forwarded
in the Forward to text box and press the Select soft key
or the
key.
To enter an international code, press and hold the
key until the + sign displays.
The phone sends your settings to the network and the
network’s acknowledgement displays.
Call barring (SIM Dependent)
Call Barring allows you to restrict specific types of
incoming and outgoing calls for your phone. This is
useful if you allow someone to use your phone for a
short period of time.
Section 8: Changing Your Settings
113
Call waiting
This network service informs you when someone is
trying to reach you during another call.
You can specify individual call waiting options for
voice calls and/or data calls.
To set your call waiting options:
1. Select the type of calls, Voice calls or Data calls, to
which the call waiting option is to be applied by pressing
the Up or Down Navigation key and then press the
Select soft key or the
key.
The screen informs you whether call waiting is activated
or deactivated.
2. Highlight Activate or Deactivate and press the Select
soft key or the
key.
3. Call waiting will then be activated or deactivated.
4. Select the Cancel all option to deactivate Call waiting on
all voice and data calls.
Network selection
The Network Selection feature enables you to
automatically or manually select the network used
when roaming outside of your home area.
Note: You can select a network other than your home network only if there
is a valid roaming agreement between the two.
To change Network Selection mode:
1. Highlight the Search now option and press the Select
soft key or the
key.
114
Network services
2. Press the Up or Down Navigation key until the network
you want highlights and then press the Select soft key
or the
key.
The phone will scan for that network and you will be
connected.
To change you Default setup:
1. Highlight the Default setup option and press the Select
soft key or the key.
2. Highlight either the Automatic or Manual option and
press the Select soft key or the key.
If you select Automatic, you are connected to the first
available network when roaming.
3. If you select Manual, press the Up or Down Navigation
key until the network you want highlights and then press
the Select soft key or the
key.
The phone will scan for that network and you will be
connected.
Caller ID
You can prevent your phone number from being
displayed on the phone of the person being called.
Note: Some networks do not allow you to change this setting.
The following options are available:
• Set by network: the default setting provided by the network is
used.
• Hide number: your number does not display on the other
person’s phone.
Section 8: Changing Your Settings
115
• Show number: your number is sent each time you make a call.
Bluetooth
About Bluetooth
Bluetooth is a short-range wireless communications
technology capable of exchanging information over a
distance of about 30 feet without requiring a physical
connection.
Unlike infrared, you don't need to line up the devices to
beam information with Bluetooth. If the devices are
within a range of one another, you can exchange
information between them, even if they are located in
different rooms.
The following Bluetooth options are available:
Turn Bluetooth On/Off
This option allows you to turn Bluetooth On or Off.
Make a selection and press the Select soft key or the
key.
My devices
This option allows you to search for new Bluetooth
devices. Highlight the Search new device option and
press the Select soft key or the
key. The phone will
search for available devices.
My visibility
This option allows you to turn your visibility to On or
Off. Make a selection and press the Select soft key or
the
key.
116
Bluetooth
My phone name
This option shows the name given to your phone for
Bluetooth purposes. You can edit the name if needed.
Security modes
This option allows you to set your security modes to
On or Off. Make a selection and press the Select soft
key or the
key.
Features
Actually, the Bluetooth specification is a protocol that
describes how the short-range wireless technology
works, whereas individual profiles describe the
services supported by individual devices. Profiles
reduce the chance that different devices will not work
together.
The following Service profiles are available:
• Headset: The remote Bluetooth headset enables outgoing and
incoming calls.
• Handsfree: The remote Bluetooth car kit enables outgoing and
incoming calls.
• Serial port: The remote Bluetooth device acts as a virtual serial
port.
• Dial up networking: The remote Bluetooth device enables
Internet access through a phone modem.
• File transfer: The remote Bluetooth device enables users to
transfer files from their handset to others.
• Object push: The remote Bluetooth device enables the transfer
of personal data (e.g. vCard, vCalendar, etc.) to other devices.
Section 8: Changing Your Settings
117
Help
This menu option launches the t-zones menu to assist
you with the Voicemail and “MyFaves” options.
Security
The Security feature enables you to restrict the use of
your phone by others and to restrict the types of calls.
Various codes and passwords are used to protect the
features of your phone.
PIN check
When the PIN Check feature is enabled, you must enter
your PIN each time you switch on the phone.
Consequently, any person who does not have your PIN
cannot use your phone without your approval.
Note: Before enabling or disabling the PIN Check feature, you must enter
your PIN. The default PIN is 1234.
The following options are available:
• Disable: the phone connects directly to the network when you
switch it on.
• Enable: you must enter the PIN each time the phone is
switched on.
Change PIN
This feature allows you to change your current PIN,
provided that the PIN check feature is enabled. You
must enter the current PIN before you can specify a
new one.
118
Security
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone lock
When the Phone lock feature is enabled, the phone is
locked and you must enter the 4- to 8-digit phone
password each time the phone is switched on.
The password is preset to “00000000” at the factory. To
change the phone password, see "Change password" on
Once the correct password has been entered, you can
use the phone until you switch it off.
The following options are available:
• Disable: you are not asked to enter the phone password when
you switch on the phone.
• Enable: you are required to enter the phone password when
you switch on the phone.
Change password
The Change password feature allows you to change
your current phone password to a new one. You must
enter the current password before you can specify a
new one.
The password is preset to “00000000” at the factory.
Once you have entered a new password, you are asked
to confirm it by entering it again.
Note: If you change your password, be sure to write it down and keep it in
a safe place. If you forget your password, your phone will require service to
have it unlocked.
Section 8: Changing Your Settings
119
Lock application
Using the Lock application option, you can lock
everything on your phone with the exception of
making a call. The password must be entered to access
Menu mode or t-zones.
1. Highlight the Lock application option and press the
Select soft key or the
key. The following
applications are listed:
• Lock all
• Call records
• Phonebook
• Messages
• Images
• Videos
• Music
• Sounds
• Other files
• Memory card
2. Use the Up or Down Navigation keys to highlight the
category and press key to mark the category.
3. Press the Save soft key to save your settings.
4. Press the Back soft key to return to the previous menu.
FDN mode
FDN (Fixed Dial Number) mode, if supported by your
SIM card, allows you to restrict your outgoing calls to a
limited set of phone numbers.
The following options are available:
120
Software update
• Disable: you can call any number.
• Enable: you can only call phone numbers stored in your SIM’s
FDN. You must enter your PIN2. You can obtain your PIN2 from
your service provider.
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the current
PIN2 before you can specify a new one. Once you have
entered a new PIN2, you are asked to confirm it by
entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
does not display.
Software update
This option lets you download Over-The-Air phone
software Updates from T-Mobile that improve the
performance of your phone. Only the internal software
is updated. No phonebook entries or other information
saved to your phone will be deleted.
Important! Make sure your phone battery is fully charged or connect your
phone to the Travel Adapter before selecting this option.
To update your phone’s software:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Settings icon.
Press the Select soft key or the
key to enter the
Settings menu.
Section 8: Changing Your Settings
121
3. Using the Navigation keys, highlight the Software
update option and press the Select soft key or the
key.
4. Follow the on-screen instructions.
Reset settings
From this menu you can reset your phone and sound
settings to the default settings.
The following options are available:
• All: Phone, Display, and Sound settings will be returned to
default values.
• Phone settings: only phone settings will be returned to
default values.
• Display settings: only display settings will be returned to
default values.
• Sound settings: only sound settings will be returned to
default values.
To reset your settings:
1. Highlight one of the options and press the
key to
place a check mark next to the option.
2. Press the Reset soft key.
3. You will be prompted with Reset settings?. Press the
Yes soft key.
4. Enter the 4- to 8-digit password and press the OK soft
key or the
key. You will receive a Reset
confirmation message.
The password is preset to “00000000.” To change this
122
My files
My files allows you to manage your sounds, images,
music, and videos in one convenient location.
Sounds
In this menu, you can view the list of sounds
downloaded from the web server or received in
multimedia messages. You can set a downloaded sound
as the current ring tone.
Note: When downloading MegaTones® or HiFi Ringers TM, charges may
apply.
The following options are available:
Get More MegaTones
Using the Get More MegaTones option on the sounds
list, you can access the website preset by T-Mobile and
download new sounds.
Get More HiFi Ringers
Using the Get More HiFi Ringers option on the sounds
list, you can access the website preset by T-Mobile and
download new HiFi Ringers.
My sounds
Highlight an item in the My sounds menu and press the
Options soft key. The following options are available:
• Download new: takes you to t-zones where you can download
new sounds.
• Play: plays the sound.
124
My files
• Send via: allows you to send the sound via Picture message or
Bluetooth.
• Set as: allows you to set the sound as your Ringtone, a Caller
ringtone, or an Alarm tone.
• Delete: allows you to delete the selected sound or delete
Multiple sounds.
• Move to memory card: allows you to move the sound to your
micro SD memory card.
• Copy to memory card: allows you to copy the sound to your
micro SD memory card.
• Rename: allows you to change the name of the sound.
• Bluetooth visibility: allows the selected sound or multiple
sounds to be shared or released for the use of another
Bluetooth device.
• Lock/Unlock: allows you to lock the sound to protect it from
deletion.
• Properties: displays the sound Name, Date, Format, Size, and
Protection.
Voice list
The Voice list contains your recorded audio messages.
Highlight an item in the Voice list menu and press the
Options soft key. The following options are available:
• Play: plays the audio message.
• Send via: allows you to send the audio message via Picture
message or Bluetooth.
• Set as: allows you to set the voice memo as a Ringtone, Caller
ringtone, or Alarm tone.
• Delete: allows you to delete the selected audio message or
delete Multiple audio messages.
Section 9: Fun & Apps
125
• Move to memory card: allows you to move the audio message
to your micro SD memory card.
• Copy to memory card: allows you to copy the audio message
to your micro SD memory card.
• Rename: allows you to change the name of the audio message.
• Bluetooth visibility: allows the selected audio message or
multiple messages to be shared or released for the use of
another Bluetooth device.
• Lock/Unlock: allows you to lock the audio message to protect
it from deletion.
• Properties: displays the audio message Name, Date, Format,
Length, Size, and Protection.
Memory card
Select this option to see the sounds that you have saved
to your memory card.
Note: The Memory card option will only appear if a micro SD memory card
has been inserted in your phone.
Images
In this menu, you can view the list of images
downloaded from the web server or received in
messages. You can set a downloaded image as the
current background image.
The following options are available:
Get More Wallpapers
Using the Get More Wallpapers option, you can access
the website preset by T-Mobile and download new
images.
126
My files
My Album
My Album is a private online picture album that you
can use to store and share pictures, videos, voice
messages, and text.
Use the following procedure to access My Album:
Note: When accessing My Album, charges may apply.
1. In your t-zone browser, select the My Albums Menu
link and press the Select soft key or the
key.
2. Photos sent to this folder are stored in the Inbox Album.
Press the Select soft key to view the photos.
3. Press the
key to exit t-zones and return to the Idle
screen.
My Journal
Make notes in My Journal, your online diary and
weblog. Keep it private to store your personal
memories, or send emails to invite people to view and
comment on your album. See your service provider for
more information.
Note: When accessing My Journal, charges may apply.
My downloads
This menu allows you to access your downloaded
images.
Scroll to the image you want to view. By pressing the
Options soft key you can access the following options:
Section 9: Fun & Apps
127
• Download new: takes you to t-zones where you can download
new images.
• View: displays the image.
• Send via: allows you to send the image via Picture message or
Bluetooth.
• Set as: allows you to set the image as Wallpaper or as a Caller
ID.
• Delete: allows you to delete the Selected image or to delete
Multiple image.
• Move to memory card: allows you to move the item to the
micro SD memory card.
• Copy to memory card: allows you to copy the item to the micro
SD memory card.
• Rename: allows you to change the name of the item.
• Display mode: allows you to see your images displayed in a
Line view or in Thumbnail view.
• Slide show: allows you to see all of your photos in a slide show
presentation.
• Bluetooth visibility: allows the selected image or multiple
images to be shared or released for the use of another
Bluetooth device.
• Lock/Unlock: allows you to lock/unlock the image to protect it
from deletion.
• Properties: displays the image Name, Date, Format,
Resolution, Size, and Protection.
My photos
In this menu you can review the photos you’ve taken.
Highlight a photo and press the Options soft key to
choose from the following options:
128
My files
• View: displays the photo.
• Send to My Album: sends the photo to My Album.
• Send via: allows you to send the image via Picture message or
Bluetooth.
• Set as: allows you to set the photo as Wallpaper or as a Caller
ID.
• Default destination: allows you to remove or replace the
default destination.
• Delete: allows you to delete the Selected photo or to delete
Multiple photos.
• Move to memory card: allows you to move the photo to the
micro SD memory card.
• Copy to memory card: allows you to copy the photo to the
micro SD memory card.
• Rename: allows you to change the name of the photo.
• Display mode: allows you to see your images displayed in a
Line view or in Thumbnail view.
• Slide Show: allows you to see all of your photos in a slide show
presentation. Choose 1 second or 3 seconds for slide show
interval.
• Bluetooth visibility: allows the selected photo or multiple
photos to be shared or released for the use of another
Bluetooth device.
• Lock/Unlock: allows you to lock/unlock the image to protect it
from deletion.
• Properties: displays the image Name, Date, Format,
Resolution, Size, and Protection.
Memory card
Select this option to see the images that you have saved
to your memory card.
Section 9: Fun & Apps
129
Note: The Memory card option will only appear if a micro SD memory card
has been inserted in your phone.
Videos
In this menu, you can view a list of videos downloaded
from the web server or received in multimedia
messages. The following options are available:
Downloaded videos
This menu allows you to access your downloaded
video clips.
Scroll to the video you want to view. By pressing the
Options soft key you can access the following options:
• Play: plays the video.
• Send via: allows you to send the video via Picture message or
Bluetooth.
• Delete: allows you to delete the Selected video clip or to delete
Multiple video clips.
• Move to memory card: allows you to move the video to the
micro SD memory card.
• Copy to memory card: allows you to copy the video to the
micro SD memory card.
• Rename: allows you to change the name of the video.
• Display mode: allows you to see your videos displayed in a
Line view or in Thumbnail view.
• Bluetooth visibility: allows the selected video or multiple
videos to be shared or released for the use of another Bluetooth
device.
• Lock/Unlock: allows you to lock/unlock the video to protect it
from deletion.
130
My files
• Properties: displays the video Name, Date, Format, Size, and
Protection.
My videos
In this menu you can review the photos you’ve taken.
Highlight a video and press the Options soft key to
choose from the following options:
• Play: plays the video.
• Send via: allows you to send the video via Picture message or
Bluetooth.
• Delete: allows you to delete the selected video or delete
Multiple videos.
• Move to memory card: allows you to move the video to the
micro SD memory card.
• Copy to memory card: allows you to copy the video to the
micro SD memory card.
• Rename: allows you to change the name of the video.
• Display mode: allows you to see your videos displayed in a
Line view or in Thumbnail view.
• Bluetooth visibility: allows the selected video or multiple
videos to be shared or released for the use of another Bluetooth
device.
• Lock/Unlock: allows you to lock the video to protect it from
deletion.
• Properties: displays the video Name, Date, Format, Size,
Resolution and Protection.
Memory card
Select this option to see the videos that you have saved
to your memory card.
Section 9: Fun & Apps
131
Note: The Memory card option will only appear if a micro SD memory card
has been inserted in your phone.
Music
My music
This options allows you to access your MP3 files in
your Music list.
Note: MP3 bit rate is limited to 192Kbps.
Memory card
Select this option to see the music files that you have
saved to your memory card.
Note: The Memory card option will only appear if a micro SD memory card
has been inserted in your phone.
Other files
This option allows you to view other types of files that
you have stored on your phone. This includes Excel
spreadsheets, text files, wmf files, PowerPoint
presentations, PDFs, MHTML and Word documents.
You can send these files by Bluetooth. You can also
move or copy the files to your memory card.
Memory card
You can check the contents of your micro SD memory
card and see what has been saved there. Press the Up or
Down navigation keys to scroll between Sounds,
Images, Videos, Music, and Other files.
132
My files
After selecting a folder, press the Options soft key for
the following options:
• Open: allows you to open the folder so you can access its
contents.
• Create folder: allows you to create a new folder.
• Delete folder: allows you to delete a selected folder.
• Rename folder: allows you to rename a selected folder.
• Bluetooth visibility: allows the selected music file or multiple
music files to be shared or released for the use of another
Bluetooth device.
• Properties: lists the folder Name, Date, Format, Size, and
Protection.
• Memory card info: lists the Memory card Capacity, Used
space, and Free space.
Note: The Memory card option will only appear if a micro SD memory card
has been inserted in your phone.
For more information on downloading files from your
PC to your Memory card, contact your service provider.
Memory status
You can check the amount of memory being used and
memory remaining for sounds, music, images, videos,
and other files. You can select Phone or Memory card.
Press the Left or Right navigation keys to scroll
between size.
Section 9: Fun & Apps
133
Games
You can download MIDlets (Java applications that run
on mobile phones) from various sources using t-zones
and store them in your phone.
When you access the Games menu, the list of default
games appears. Once you have downloaded games,
they are added to the list.
Note: Java services may not be available, depending on your service
provider.
Get more games
You can download more games from the website preset
by your service provider using the Get more games
option.
My games
1. Scroll to the MIDlet you want on the Games list and press
the
key.
2. The startup screen of the MIDlet will be displayed along
with game options. Use the Navigation keys to scroll
between options. Press the
key to make a selection.
3. The startup screen of the MIDlet will be displayed along
with game options.
4. To select options, press the Options soft key on the
Games list. Use the Navigation keys to scroll between
options. Press the
key to make a selection.
Note: MIDlet game options will differ depending on the MIDlet you select.
134
Music player
Music player
The Music Player can be used to play files you have
loaded from your PC to your micro SD memory card.
Note: The following characters cannot be used in the filename:
< > “ ? / \ : * |
1. In the Fun & Apps menu, select Music player and
press
the Select soft key or the
key.
2. Before you select an MP3, press the Options soft key to
select from the following options:
• Add music from: allows you to add music from your
Phone or memory card.
• Settings: allows you to set these settings; Repeat mode,
Shuffle, Equalizer, Visualization, Backlight, and Volume.
3. Highlight the Add music from option and press the
Select soft key or the
key.
4. Depending on where your MP3s are stored, highlight the
Phone or Memory card option and press the Select soft
key or the
key.
5. Press the Up or Down navigation keys to highlight the
song or songs you want to listen to. Press the
check mark the songs.
key to
6. Press the Add soft key. The marked songs will be added
to your Music list.
Section 9: Fun & Apps
135
7. Press the Options soft key and highlight the Play option.
Press the Select soft key or the
key to play your
music.
8. While listening to an MP3, press the Options soft key for
the following options:
• Pause: allows you to pause the song you are listening to.
Press the
to resume the song.
• Open playlist: allows you to open My playlist or Current
playlist.
• Remove from playlist: removes the MP3 from your
current playlist.
• Settings: allows you to set these settings; Repeat Mode,
Shuffle, Equalizer, Visualization, Backlight, and Volume.
• Properties: allows you to view MP3 Name, Date, Format,
Bitrate, Length, Size, and Protection.
Camera
For information on using your camera and camcorder,
Voice recognition
VoiceSignal is advanced speech recognition
software that can be used to activate a wide-variety
of functions on your phone. VoiceSignal software
automatically voice activates all contacts for voice
dialing and searching, no pre-recording or training
needed. Speak phone numbers naturally to dial, and
use voice commands to launch applications and
navigate phone menus.
136
Voice recognition
VoiceSignal Options
The following is a list of functions that you can
perform using VoiceSignal speech recognition on
your phone.
• Call <Name or #>: dial by saying either a Name or a number in
your Contact list
• Send text <Name>: send a text message to a number or to
someone in your Contact list.
• Lookup <Name>: open the contact record for any name in
your Contact list.
• Go to <App>: open any application installed on your device.
• Check <Item>: provides details of your status, battery, signal
strength, network coverage and my phone number.
Call Digit Dialing
Digit Dial allows you to dial any phone number by
simply speaking the digits into the phone. No
training is necessary, and Digit Dial is programmed
to understand natural speech.
1. Access VoiceSignal by doing one of the following:
• Press and hold the
key.
• Press and hold the Multi-Function button on a plug-in
headset or a Bluetooth headset.
• In the Fun & Apps menu, select Voice recognition and
press the Select soft key or the
key.
After a brief pause, a list of optional commands appears
in the display (and the “Say a command” message
appears in the external display) and the audio prompt
“Say a command” plays through the earpiece.
Section 9: Fun & Apps
137
2. To use Digit Dialing, say “Call” and the area code and
number that you want to dial at a distance of 3-12 inches
from the phone in a natural voice.
3. The number that you said is repeated through the
earpiece and your phone dials the number.
4. If VoiceSignal is not sure of the number that you said, a
list of possible matches appears in the display.
5. You’re asked to confirm the correct number as
VoiceSignal displays the results. Say “Yes” or “No” to
confirm or reject the number when prompted.
Call Name Dialing
To use Name Dial, you’ll need to have entries stored
in your Phonebook. See “Section 6: Understanding
Your Phonebook” on page 59 for information on
creating Phonebook entries.
1. Access VoiceSignal by doing one of the following:
• Press and hold the
key.
• Press and hold the Multi-Function button on a plug-in
headset or a Bluetooth headset.
• In the Fun & Apps menu, select Voice recognition and
press the Select soft key or the
key.
After a brief pause, a list of optional commands appears
in the display (and the “Say a command” message
appears in the external display) and the audio prompt
“Say a command” plays through the earpiece.
2. To use Name Dialing, say “Call” and the name of the
contact that you want to dial.
138
Voice recognition
3. The name that you said is repeated through the earpiece
and your phone dials the number.
4. If VoiceSignal is not sure of the name that you said, a list
of possible matches appears in the display.
5. You’re asked to confirm the correct number as
VoiceSignal displays the results. Say “Yes” or “No” to
confirm or reject the number when prompted.
6. The location is repeated through the earpiece and your
phone dials the number.
Send Text Message
1. In the Fun & Apps menu, select Voice recognition and
press the Select soft key or the key.
2. A list of commands appears in the display and the audio
prompt “Say a command” plays through the earpiece.
3. Say “Send Text” at a distance of 3-12 inches from the
microphone. “Say the Name or Number” plays through
the earpiece.
4. After you say a name or number, you might be prompted,
“Did you say?” To confirm a name or number, wait for
the beep and then say “Yes.”
5. You can also choose the correct name or number from
the choice list using the phone’s arrow keys.
6. The Text Message client is launched. Enter your text
message.
Name Lookup
To perform a name lookup, you’ll need to have some
entries in your Contact list.
Section 9: Fun & Apps
139
1. Access VoiceSignal by doing one of the following:
• Press and hold the key.
• Press and hold the Multi-Function button on a plug-in
headset or a Bluetooth headset.
• In the Fun & Apps menu, select Voice recognition and
press the Select soft key or the
key.
After a brief pause, a list of optional commands appears
in the display (and the “Say a command” message
appears in the external display) and the audio prompt
“Say a command” plays through the earpiece.
2. Say “Lookup” at a distance of 3-12 inches from the
microphone. “Say the name” plays through the earpiece.
3. Say the name exactly as it is displayed in your Contact
list, first name followed by last name.
4. The contact name appears in the display with other
information that you’ve entered for that contact.
Opening Applications
You can open an application or access a menu on
your phone using VoiceSignal.
1. Access VoiceSignal by doing one of the following:
• Press and hold the
key.
• Press and hold the Multi-Function button on a plug-in
headset or a Bluetooth headset.
• In the Fun & Apps menu, select Voice recognition and
press the Select soft key or the
key.
140
Voice recognition
After a brief pause, a list of optional commands appears
in the display (and the “Say a command” message
appears in the external display) and the audio prompt
“Say a command” plays through the earpiece.
2. Say “Go To” at a distance of 3-12 inches from the
microphone. A list of options displays and a prompt of
“Please choose” plays through the earpiece. If the option
you desire is not listed, say “Next Menu” to scroll to the
next page.
3. The menu option spoken opens.
Checking Phone Status
Use the Check command to see and hear status
information from your phone, including its phone
number, status, current signal strength, network
coverage, and battery level.
To check phone status:
1. Access VoiceSignal by doing one of the following:
• Press and hold the
key.
• Press and hold the Multi-Function button on a plug-in
headset or a Bluetooth headset.
• In the Fun & Apps menu, select Voice recognition and
press the Select soft key or the
key.
After a brief pause, a list of optional commands appears
in the display (and the “Say a command” message
appears in the external display) and the audio prompt
“Say a command” plays through the earpiece.
Section 9: Fun & Apps
141
2. Say “Check” at a distance of 3-12 inches from the
microphone. A list of options displays and a prompt of
“Please choose” plays through the earpiece.
3. The phone status menu option spoken is displayed.
Voice recognition settings
You can adjust the settings and preferences for
VoiceSignal by opening the Voice recognition
settings menu.
To access the VoiceSignal Settings menu, while in the
VoiceSignal application, follow these steps:
1. Press the Settings soft key.
2. Use the navigation keys to select the setting you want to
change.
The following options are available:
• Choice Lists: if VoiceSignal is not absolutely confident that it
has correctly identified a name or number, it can display a
choice list of up to three possibilities, and prompt you to
confirm the correct one. You can control when choice lists
appear by changing the Choice Lists setting to the following:
• Automatic: VoiceSignal displays a choice list when it is not
confident it has identified the correct choice from among
multiple alternatives.
• Always On: when there are multiple alternatives, VoiceSignal
always displays a choice list.
• Always Off: VoiceSignal never displays a choice list. Instead,
the application picks the best from among the possible
choices.
• Sensitivity: in VoiceSignal, sensitivity controls the balance
between rejecting too much, which means the phone
142
Voice recognition settings
frequently does not recognize names, numbers, or commands,
and rejecting too little, which means it frequently recognizes
something even if nothing was said. When VoiceSignal rejects
an utterance, it displays a message such as “Please repeat…”
or “No match found.” If you frequently experience these
messages, you might be able to get better recognition by
adjusting the Sensitivity setting toward Reject Less. If you
frequently experience false activations (VoiceSignal detects a
wrong match), you might be able to get better performance by
adjusting the Sensitivity setting toward Reject More.
• Digit Dialing: use the Digit Dialing menu to adapt digit dialing
to your voice.
• Adapt Digits: lets you adapt digits, which can improve
voice recognition of phone numbers. Adaptation takes about
60 seconds.
• Reset Digits: erases any digit adaptation you have done
and resets digit recognition to the factory default. If you have
not adapted digits, this option is grayed out.
• Sound: you can customize the VoiceSignal user interface by
turning playback on or off for prompts, names, and numbers.
You can also change the speed and volume of name playback.
• Prompts: turns playback on or off for prompts such as
“Please say a command.”
• Digits: turns playback on or off for digits, for example, when
confirming a phone number.
• Names: turns playback on or off for names.
• Name settings: adjusts the Speed and Volume of name
playback.
• Speakerphone: turns the Speakerphone on or off when
voice recognition is started.
• About: displays information about VoiceSignal including Version
number, Build number, and Device number.
Section 9: Fun & Apps
143
Organizer
The Organizer allows you to set alarms, schedule
appointments, view the calendar, create tasks, perform
simplemathcalculations,checkworldtime,performunit
conversions, set a timer, and use a stopwatch.
Alarm
This feature allows you to:
• set up to 3 alarms to ring at specified times.
• set the phone to switch on automatically and ring the alarm
even if the phone is switched off.
The following options are available:
• Wake up call: the alarm rings to wake you up in the morning.
• Alarm1: set the time and tone for this alarm.
• Alarm2: set the time and tone for this alarm.
• Auto power: alarm rings at the specified time even if the phone
is turned off. If the option is set to Off and the phone is
switched off at the specified time, the alarm does not ring.
To set an alarm:
1. Highlight the alarm you would like to set and press the
Select soft key or the
key.
2. Highlight the Alarm option and press the Right
navigation key to set Alarm to On.
3. Press the Down key to highlight the Alarm time option.
Enter the time you want the Alarm to sound.
4. Press the Down key to highlight the AM/PM option.
Press the Left or Right navigation key to set to AM or
PM.
144
Organizer
5. Press the Down key to highlight the Repeat option.
Press the Left or Right navigation key to set to Once,
Everyday, Except weekend or Except sunday.
6. Press the Down key to highlight the Alarm tone option.
Press the
locations.
key to bring up a list of alarm tone
7. Press the Up or Down Navigation key to highlight an
alarm tone location. Choose between My sounds, Music,
Voice list, Music, or Default sounds. Press the Select
soft key or the
key.
8. Press the Up or Down Navigation key to select an alarm
tone. Press the Select soft key or the
key.
9. Press the Save soft key.
10. Press the
key to return to Idle mode.
Note: Your phone is preset to a 12-hour format. To change the time format,
11. To stop the alarm when it rings, press any key.
Calendar
With the Calendar feature, you can:
• consult the calendar by month, week, or day.
• set schedules and note anniversaries.
• make a Task.
• write memos to keep track of your schedule.
• set an alarm to act as a reminder, if necessary.
• check your memory status.
Section 9: Fun & Apps
145
When you select the Calendar menu, the following
options are available:
Month view
When you select this option, the calendar displays the
selected month with today’s date highlighted.
At the bottom of the calendar, the following icons are
displayed along with the number of entries for each:
Schedule items
Anniversary events
Miscellaneous items
The number of entries next to each icon reflects the
number of entries for the selected day on the calendar.
The following options are available when you press the
Options soft key:
• View mode: allows you to select between Day view or Week
view of the selected day.
• Create: allows you to create a Schedule, Anniversary, or
Miscellaneous event.
• Go to: allows you to see the Month view with today’s date
highlighted or a specified date.
• Delete: allows you to delete all events for a selected date,
delete all events for a specified period, or delete all events for
This month dates. You can also delete all events.
Week view
When you select this option, the calendar displays the
selected week with today’s date and time highlighted.
146
Organizer
The following options are available when you press the
Options soft key:
• View mode: allows you to select between Day view or Month
view of the selected day.
• Create: allows you to create a Schedule, Anniversary, or
Miscellaneous event.
• Go to: allows you to see the Week view with today’s date
highlighted or a specified date.
• Delete: allows you to delete all events for a selected date,
delete all events for preceding dates, or delete all events for
this Week dates. You can also delete all events.
Day view
When you select this option, you are taken to the Day
view of the selected day with any events listed. The
following options are available when you press the
Options soft key:
• View: allows you to view the event scheduled for this day.
• Create: allows you to create a Schedule, Anniversary, or
Miscellaneous event.
• Send via: allows you to send the event via Text message,
Picture message, or a Bluetooth device.
• View mode: allows you to select between Month view or Week
view of the selected day.
• Delete: allows you to delete the Selected event, This day event,
or All events scheduled on your calendar.
Schedule
This option allows you to write memos to a schedule.
1. From Month, Week, or Day View, press the Options soft
key. Highlight the Create option and press the Select
Section 9: Fun & Apps
147
soft key or the
2. Highlight the Schedule option and press the Select soft
key or the key.
key.
3. Enter the subject in the Subject text box then press the
Down soft key.
4. Continue to enter other information including Details,
Start date, Start time, AM/PM, Due date, End time, AM/
PM, Location, Alarm, Before, Alarm tone. Check the
Repeat box using the
key if you want to repeat the
alarm, then enter the repetition frequency (Everyday,
Every week, or Every month) and the Until date.
5. When you are finished, press the Save soft key.
Your information is saved to the Schedule.
Anniversary
This option allows you to record Anniversaries in your
calendar. You can also set an alarm to remind you of
important anniversaries.
1. From Month, Week, or Day View, press the Options soft
key. Highlight the Create option and press the Select
soft key or the
2. Highlight the Anniversary option and press the Select
soft key or the key.
key.
3. Enter the occasion in the Occasion text box then press
the Down soft key.
4. Continue to enter other information including Date,
Alarm, Before, Alarm time, AM/PM, Alarm tone, and
whether or not to Repeat every year.
148
Organizer
5. When you are finished, press the Save soft key.
Your Anniversary information is saved to the Calendar.
Miscellaneous
This option allows you to record miscellaneous dates or
events in your calendar.
1. From Month, Week, or Day View, press the Options soft
key. Highlight the Create option and press the Select
soft key or the
2. Highlight the Miscellaneous option and press the
Select soft key or the key.
key.
3. Enter the subject in the Subject text box then press the
Down soft key.
4. Continue to enter other information including Details,
Start date, Start time, AM/PM, Due date, End time, and
AM/PM.
5. When you are finished, press the Save soft key.
Your Miscellaneous information is saved to the Calendar.
Missed alarm events
You can check on all of the events that you have set an
alarm on.
1. Highlight the Missed alarm events option and press the
Select soft key or the
2. To view an event information, highlight an event and
press the key. If no alarm events have been missed,
key.
0 Missed is displayed.
The missed alarm event information is displayed.
Section 9: Fun & Apps
149
3. To acknowledge and remove the event, press the
Confirm soft key or the key.
The event will be removed from the Missed alarm events
menu.
Memory status
This option displays the number of Calendar, Schedule,
Anniversary, and Miscellaneous events and the amount
of memory that they use.
Tasks
You can use the Tasks function to in the same way you
would use a written task list. When the task has been
completed, you can check it off as done.
To enter tasks into your Organizer, follow these steps:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight Organizer and press the Select soft key or the
key.
4. Highlight Tasks and press the Select soft key or the
key.
5. The first time you enter the task menu, it will be empty.
Press the Options soft key and highlight the Create
option. Press the Select soft key or the
key.
6. In the Task text box, enter your task. It can be up to 160
characters long.
150
Organizer
7. Press the Down Navigation key and highlight the Start
date option. If you want to have a start date, press the
key to check the box then use the Down key to
highlight the Start date text box. Enter the start date.
8. Scroll down and repeat step 7 for the Due date.
9. Scroll down and highlight the Priority option. Use the
Left or Right Navigation keys to select High, Normal, or
Low.
10. Press the Save soft key.
To see your Task list, you can go to the Task option in
the Organizer or you can see each task under Day view
of the calendar for the day it was started.
To mark a task as Done:
1. Select the task in the task list.
2. Press the Options soft key and highlight the Done
option. Press the Select soft key or the
3. The task will have a check mark after it in the Task list.
Calculator
key.
With this feature, you can use the phone as a calculator.
The calculator provides the basic arithmetic functions;
addition, subtraction, multiplication, and division.
1. Enter the first number using the numeric keys.
2. Enter the operation for your calculation by pressing the
following navigation keys:
• Left: subtraction (-)
• Right: addition (+)
• Up: multiplication (x)
Section 9: Fun & Apps
151
• Down: division (÷)
3. The Left soft key can be used to create a decimal point
and left and right brackets.
4. Enter the next number.
5. To view the result, press the
Repeat steps 1 to 5 as many times as required.
World time
key.
This feature allows you to find out what time it is
another part of world, using the Left and Right
Navigation keys.
There are two time lines available. You can set the first
setting to your home city and then use the second
setting to check other city times.
Press the Options soft key for the following options:
• Save: this allows you to save your world time settings.
• Set daylight saving time: use the
key to place a check
mark next to the cities that you want to set daylight savings
time. Each city listed represents a time zone.
Unit conversion
The Unit conversion menu provides the following
conversion categories:
• Currency
• Length
• Weight
• Volume
• Area
152
Organizer
• Temperature
To convert any of the above categories, do the
following:
1. Scroll to the conversion feature you wish to use and
press the Select soft key or the key.
2. Enter the quantity you want converted in the upper text
box.
Note: To include a decimal point, press the
key.
3. Use the Up, Down, Left, and Right navigation keys to
select the From and To units of money or measure for
the quantity you want converted.
The converted quantity appears in the lower text box.
Timer
You can use this menu to set a timer. To enable the
Timer, use the following options:
1. Press the Set soft key to enter the length of time.
2. Enter the time and press the OK soft key.
3. Press the
key to start the timer. Press the
key
again to stop the timer.
Stopwatch
This feature allows you to use a stopwatch. Press the
key to start the stopwatch. Press the Reset soft key
to erase all stopwatch times recorded. Press the
for the lap time. You can have up to 4 lap times.
key
Section 9: Fun & Apps
153
154
Section 10: Camera and Camcorder
Topics Covered
• Using the Camera and Camcorder
• Take and send
• Record video
• My photos
• My videos
• My Album
• My Journal
This section explains how to use the camera and
camcorder on your phone. You can take photos and
video clips using the built-in camera and camcorder.
Section 10: Camera and Camcorder
155
Using the Camera and Camcorder
Using the camera/camcorder module in your phone,
you can take photos or video clips of people or events
while on the move. Additionally, you can send photos
and video clips to other people in a Picture Messaging
message or set a wallpaper or caller ID image.
Note:
Do not take photos or videos of people without their permission.
Do not take photos or videos in places where cameras are not allowed.
Do not take photos or videos in places where you may interfere with
another person’s privacy.
Take and send
Your camera produces photos in JPEG format.
Note: When you take a photo in direct sunlight or in bright conditions,
shadows may appear on the photo.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon.
Press the Select soft key or the
key to enter the
menu.
3. Using the Navigation keys, scroll to the Camera option.
Press the Select soft key or the
key to enter the
menu.
4. Highlight Take and Send and press the Select soft key
or the key.
156
Take and send
Note: Steps 1–4 can be bypassed by pressing the Up navigation key or the
Camera key while in Idle mode.
5. Adjust the image by aiming the camera at the subject.
Press the Left soft key to access the camera options. For
can use the keypad to quickly change the camera
options.
6. Press the
key to take the photo. Send to My Album?
is displayed. Press the Yes soft key if you want to send
the photo to your T-Mobile My Album service. The
phone’s default destination is set to My Album. The
photo is automatically saved in My photos in the phone.
Note: To change the default destination for your pictures, press the
Options soft key when Send to My Album? appears on the display.
Highlight the Default destination option. You can then Remove your
default destination or Replace it with a Recent recipients, Phonebook, New
recipient, My Album destination, or My Journal destination.
7. To use the photo options, press the Options soft key.
8. To return to Capture mode, select Take another.
9. To return to Idle mode, press the
key.
Using Camera Options
In Capture mode, you can use various options for the
camera by pressing the Left soft key.
The following options are available:
• Record video: switches from camera to camcorder.
Section 10: Camera and Camcorder
157
• Shooting mode: allows you to Take a photo in various modes.
Once you change the mode, the corresponding indicator
appears at the top left of the display. The following modes are
available:
• Single shot: allows you to Take a photo normally and have it
Automatically saved.
• Multi-shot: allows you to take a series of action stills. Select
the capture speed, High Speed or Normal Speed, and the
number of photos the camera will take. When you press the
key, the camera takes photos successively.
• Mosaic style: allows you to take several photos to combine
in a mosaic.
• Effects: allows you to change the color tone or apply special
effects to the photo.
• Frames: allows you to select a decorative frame. Select a frame
from the list using the Navigation keys and press the
to save your setting.
key
• Timer: allows you to set a time delay before the camera takes
the photo. Select the length of delay you want. When you press
key, the camera takes the photo after the specified time
has elapsed.
• Go to My photos: takes you to your My photos folder.
• Settings: allows you to change the image settings.
• Size: allows you to set the image size to either
SXGA(1280X1024), Mega(1152X864), SVGA(800X600),
VGA(640X480), QVGA(320X240), or Mobile(176X144). The
selected image size displays on the capture screen.
• Viewfinder: allows you to set the viewfinder to Full screen or
Actual screen.
• Shutter sound: allows you to select a tone for the shutter
sound. Choose between 4 tones.
• Zoom sound: allows you to turn zoom sound On or Off.
158
Take and send
• Brightness sound: allows you to turn brightness sound On
or Off.
• Default name: allows you to change the default name
assigned to your Photo.
• Camera shortcuts: shows you how to change Camera options
using your keypad.
Camera-Camcorder Shortcuts
The following shortcuts are available:
KEY
CAMERA MODE
CAMCORDER MODE
Up and Down navigation keys adjust the image brightness.
Left and Right navigation keys zoom in and out.
Takes the photo.
Turns the video recording on or
off.
Up volume key flips the image vertically.
Down volume key the image horizontally.
Changes from camera to camcorder or camcorder to camera.
Changes the picture/video resolution.
Changes the camera shot/recording mode.
Changes the color tone or applies a special effect to the photo/
video.
Selects a decorative frame.
Sets a time delay.
Turns the video sound on or off.
Section 10: Camera and Camcorder
159
KEY
CAMERA MODE
CAMCORDER MODE
Takes you to My Photos menu. Takes you to My videos menu.
Changes capture mode to full screen.
Record video
Your camcorder produces videos in 3GP format.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon.
Press the Select soft key or the
key to enter the
menu.
3. Using the Navigation keys, scroll to the Camera option.
Press the Select soft key or the
key to enter the
menu.
4. Highlight Record video and press the Select soft key or
the key.
5. Adjust the image by aiming the camcorder at the subject.
Press the Left soft key to access the camcorder options.
You can use the keypad to quickly change the camcorder
options.
6. To start recording your video clip, press the
key.
7. To stop the recording, press the Right soft key. The video
clip is automatically saved in the My videos folder.
8. To delete the video clip, press the Options soft key,
highlight Delete, press the Select soft key or the
key, then press the Yes soft key.
160
Record video
To return to Idle mode, press the
To access camcorder options, press the Left soft key.
Using Camcorder Options
key.
In Capture mode, you can use various options for the
camcorder by pressing the Left soft key.
The following options are available:
• Take picture: allows you to take a photo in camera mode.
• Effects: allows you to change the color tone or apply special
effects to the video clip.
• Timer: allows you to set a time delay before the camcorder
takes the video clip. Select the length of delay you want. When
you press the
key, the camcorder records the video after
the specified time has elapsed.
• Go to My videos: takes you to your My videos folder where you
can view your videos.
• Settings: allows you to change the recording settings.
• Recording mode: allows you to set to Normal or Limit for
message to keep the video shorter.
• Size: allows you to set the image size to either
QICF(176X144), or SQCIF(128X96). The selected image size
displays on the capture screen.
• Viewfinder: allows you to set the view finder to Full screen
view or Actual screen.
• Audio record: allows you to be able to record sounds with
your video. Set to On or Off.
• Zoom sound: allows you to turn zoom sound On or Off.
• Brightness sound: allows you to turn the brightness sound
On or Off.
• Default name: allows you to change the default name
assigned to your Video.
Section 10: Camera and Camcorder
161
• Camcorder shortcuts: shows you how to change Camcorder
Shortcuts” on page 159 for a list of available short cuts.
My photos
1. In Idle mode press the Menu soft key to access the Menu
mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Camera option and press the Select soft
key or the key.
4. Select My photos and press the Select soft key or the
key.
When you access this menu, your phone displays the
photos in Line view, which shows them as small images.
Use the Navigation keys to scroll through the photos.
5. To view the photos on the full screen, press the
key.
To go back to Line view, press the Back soft key or the
key.
6. You can use the Left and Right navigation keys to scroll
through your photos.
My photos options
In the My photos menu, press the Options soft key to
use the following options:
• View: allows you to view the photo on your display.
• Send to My Album: allows you to send the photo to My Album.
• Send via: allows you to send the photo via Picture message or
Bluetooth.
162
My photos
• Set as: allows you to set the photo as your wallpaper or as a
Caller ID.
• Default destination: allows you to Remove or Replace the
default destination.
• Delete: allows you to delete the Selected photo or to delete
Multiple photos.
• Move to memory card: allows you to move the selected photo
or all photos to your micro SD memory card.
• Copy to memory card: allows you to copy the selected photo
to your micro SD memory card.
• Rename: allows you to change the name of the photo.
• Display mode: allows you to see your photos displayed in a
Line view or in Thumbnail view.
• Slide show: allows you to see all of your photos in a slide show
presentation.
• Bluetooth visibility: allows the photo to be shared or released
for the use of another Bluetooth device.
• Lock: allows you to protect the photo from being deleted.
• Properties: shows the properties of the photo, such as the
Name, Date, Format, Size, Resolution, and Protection status.
Deleting a Photo
You can delete photos one by one or all at one time.
1. From the My photos menu, select the photo you want to
delete and press the Options soft key. Highlight the
Delete option and press the Select soft key or the
key.
2. Highlight the Selected option and press the Select soft
key or the
key. Or, highlight Multiple to delete more
than one photo or to delete All photos.
Section 10: Camera and Camcorder
163
3. At the “Delete?” prompt, press the Yes soft key to
confirm the deletion or No to cancel.
4. When you have finished, press the
key.
My videos
1. In Idle mode press the Menu soft key to access the Menu
mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Camera option and press the Select soft
key or the key.
4. Select My videos and press the Select soft key or the
key.
When you access this menu, your phone displays the
video clips in Thumbnail mode, which shows them as
small images. Use the Navigation keys to scroll through
the video clips.
5. To view the video clips on the full screen, press the
key.
My videos Options
In the My videos menu, press the Options soft key to
use the following options:
• Play: allows you to view the video clip on your display.
• Send via: allows you to send the video as part of a Picture
message or Bluetooth.
• Delete: allows you to delete the Selected video clip or delete
Multiple video clips.
164
My videos
• Move to memory card: allows you to move the video to your
micro SD memory card.
• Copy to memory card: allows you to copy the video to your
micro SD memory card.
• Rename: allows you to change the name of the video clip.
• Display mode: allows you to see your videos displayed in a
Line view or in Thumbnail view.
• Bluetooth visibility: allows the video (or all videos) to be
shared or released for the use of another Bluetooth device.
• Lock: allows you to protect the video clip from being deleted.
• Properties: shows the properties of the video clip, such as the
Name, Date, Format, Size, Resolution, and Protection status.
Deleting a Video Clip
You can delete video clips one by one or all at one time.
1. From the My videos menu, use the Up or Down
Navigation key to highlight the video you want to delete
and press the Options soft key.
2. Highlight the Delete Option, then press the Select soft
key or the
key.
3. Highlight Selected if you only want to delete the video
clip that you selected. Highlight Multiple if you want to
delete more than one or all video clips.
4. Press the Select soft key or the
key.
5. At the “Delete?” prompt, press the Yes soft key to
confirm the deletion, or No to cancel.
6. Press the
key to return Idle mode.
Section 10: Camera and Camcorder
165
My Album
My Album is a private online picture album that you
can use to store and share pictures, videos, voice
messages, and text.
Use the following procedures to access My Album.
Note: When accessing My Album, charges may apply.
1. In Idle mode press the Menu soft key to access the Menu
mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight Camera and press the Select soft key or the
key.
4. Select My Album and press the Select soft key or the
key. The browser is launched and the T-Mobile web
page displays.
5. Select the My Albums Menu link and press the
6. Photos sent to this folder are stored in the Inbox Album.
Highlight the Inbox Album link and press the key.
key to view the
key.
Highlight a photo and press the
photos.
7. Press the
key to exit t-zones and return to the Idle
screen.
166
My Journal
My Journal
Make notes in My Journal, your online diary and
weblog. Keep it private to store your personal
memories, or send emails to invite people to view and
comment on your album. See your service provider for
more information.
Note: When accessing My Journal, charges may apply.
Section 10: Camera and Camcorder
167
168
t-zones
Your phone is equipped with a WAP (Wireless
Application Protocol) browser to allow you to access and
navigate the wireless web using your phone.
To access t-zones, follow these steps:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the t-zones icon.
Press the Select soft key or the
key to enter the
menu.
The following options are available:
Home
Selecting this menu connects the phone to the network
and loads the t-zones homepage.
Note: You can enter t-zones without going through the t-zones menu by
simply pressing the t-zones soft key while in Idle mode.
The content of the t-zones startup homepage depends on
your wireless web service provider. To scroll through the
screen, use the Up and Down keys.
Togotothestartuphomepagefromanyotherscreeninthe
t-zones, use the Home option. For more information on
the t-zones menus, see "Selecting and Using Menu
Exiting the t-zones
To exit the browser at any time, simply press the
key.
170
t-zones
Navigating the t-zones
1. To scroll through browser items, press the Up or Down
Navigation key.
2. To select browser items, press the
key. Or, press the
Options soft key. Highlight the Select option and press
the OK soft key.
3. To return to the previous page, press the Options soft
key. Highlight Go and press the Select soft key or the
key. Highlight the Back option and press the Select
soft key.
4. To return to the startup homepage, press the Home soft
key.
Entering Text in t-zones
Whenyouarepromptedtoentertext, thecurrentlyactive
text input mode is indicated on the screen. The following
modes are available:
• Upper-case character mode (A): allows you to enter upper-
case English characters.
• Lower-case character mode (a): allows you to enter lower-
case English characters.
Note: You can enter symbols in upper-case or lower-case character mode
by pressing the
key.
• Number mode (1): allows you to enter numbers.
To change the text input mode, use the following
procedures:
1. Press the Right soft key one or more times.
2. To enter a space, press the
key.
Section 11: t-zones
171
3. To edit text, set the cursor to the right of the character(s)
to be corrected.
4. Press the
key as required.
5. Enter the correct character(s).
Selecting and Using Menu Options
Various menus are available when you are using t-zones
to navigate the wireless web.
To access the browser options menu:
1. Press the Options soft key.
Note: The menus may vary, depending on your version of t-zones.
The following options are available:
• Go to homepage: takes you back at any time to the home page
of the wireless web service provider.
• Go to URL: allows you to manually enter the URL address of a
web page. After entering an address, press the
there directly.
key to go
• Go: allows you to navigate forward or backward to a web page.
• Reload: reloads the current page.
• Bookmarks: adds favorite pages to a list so you can have quick
and easy access to them later.
• Send URL: allows you to send a URL in a text message.
• Inbox: takes you to your message Inbox.
• To smartFit view: allows you to change how a web page is
viewed in the display. Choose either To smartFit view (default
setting) or To Desktop view.
• Save: allows you to save internet images and/or web pages.
172
t-zones
• Page details: displays the URL address of the web page to
which you are currently connected.
• Browser Options: allows you set browser options.
• Cache: a memory area where frequently accessed data can
be stored for rapid access.
ⅷ Cache mode: choose from No cache, Net first, or Cache first.
ⅷ Clear cache: allows you to clear the information stored in the
phone’s temporary memory which stores the most recently
accessed web pages.
• Cookies: cookies are small text files of web pages stored on
your phone.
ⅷ Cookie mode: allows you to Accept all, Reject all, or be
prompted to accept a cookie.
ⅷ Delete cookies: allows you to delete cookies.
• Preferences: allows you set t-zones preferences.
• Certificates: allows you to view internet certificates.
ⅷ Root Certificate: provides several root certificates from which to
choose.
ⅷ CA Certificate: provides several CA certificates from which to
choose.
• About browser: displays information about the browser.
Bookmarks
This menu stores up to 100 URL addresses.
To store a URL address:
1. Select an empty location and press the Select soft key
or the
key.
2. Enter a name for the favorite item in the Name text box
and press the Down key.
Section 11: t-zones
173
3. Enter the address in the URL text box and press the Save
soft key.
After saving favorite items, you can access the following
options by selecting the item, then pressing the Options
soft key:
• Go to URL: takes you to the site.
• Edit: allows you to edit the address.
• Delete: allows you to delete the selected address or you can
delete all addresses.
Or, you can select the favorite item and press the
Your browser will take you to the site.
key.
Go to URL
ThismenuallowsyoutomanuallyentertheURLaddress
of a website that you wish to access.
Clear Cache
Youcancleartheinformationstoredinthecache,whichis
the phone’s temporary memory which stores the most
recently accessed web pages.
At the Clear cache? prompt, press the Yes soft key to
confirm the deletion. Otherwise, press the No soft key.
174
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It
isdesignedandmanufacturednottoexceedtheexposure
limits for radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S.
government.TheseFCCexposurelimitsarederivedfrom
the recommendations of two expert organizations, the
National Counsel on Radiation Protection and
Measurement (NCRP) and the Institute of Electrical and
Electronics Engineers (IEEE). In both cases, the
recommendations were developed by scientific and
engineering experts drawn from industry, government,
and academia after extensive reviews of the scientific
literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile
phones employs a unit of measurement known as the
Specific Absorption Rate (SAR). The SAR is a measure of
the rate of absorption of RF energy by the human body
expressedinunitsofwattsperkilogram(W/kg).TheFCC
requires wireless phones to comply with a safety limit of
1.6 watts per kilogram (1.6 W/kg). The FCC exposure
limit incorporates a substantial margin of safety to give
additional protection to the public and to account for any
variations in measurements.
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
testedfrequencybands. AlthoughtheSARisdetermined
176
Health and Safety Information
at the highest certified power level, the actual SAR level
of the phone while operating can be well below the
maximumvalue.Thisisbecausethephoneisdesignedto
operate at multiple power levels so as to use only the
power required to reach the network. In general, the
closeryouaretoawirelessbasestationantenna,thelower
the power output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in
positions and locations (e.g. at the ear and worn on the
body) as required by the FCC. For body worn operation,
this model phone has been tested and meets FCC RF
exposure guidelines when used with a Samsung
accessory designated for this product or when used with
anaccessorythatcontainsnometalandthatpositionsthe
handset a minimum of 1.5 cm from the body. Use of other
accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for
thismobile phonewithallreportedSAR levels evaluated
as in compliance with the FCC RF exposure guidelines.
The maximum SAR values for this model phone as
reported to the FCC are:
• Head: 0.814 W/Kg.
• Body-worn: 0.699 W/Kg.
SAR information on this and other model phones can be
viewed on-line at www.fcc.gov/oet/fccid. To find
information that pertains to a particular model phone,
Section 12: Health and Safety Information
177
this site uses the phone FCC ID number which is usually
printed somewhere on the case of the phone. Sometimes
it may benecessary toremove the battery pack to find the
number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website
anditshouldprovidevaluesfortypicalormaximumSAR
for a particular phone. Additional product specific SAR
information can also be obtained at www.fcc.gov/cgb/
sar.
UL Certified Travel Adapter
TheTravelAdapterforthisphonehasmetUL1310safety
requirements. Please adhere to the following safety
instructions per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS
OUTLINED MAY LEAD TO SERIOUS PERSONAL
INJURY AND POSSIBLE PROPERTY DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN THE
U.S.A., USE AN ATTACHMENT PLUG ADAPTOR OF
THE PROPER CONFIGURATION FOR THE POWER
OUTLET.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
178
Consumer Information on Wireless Phones
from wireless phones. The FDA publication includes the
following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held
wireless phones with built-in antennas, often called
"cell," "mobile," or "PCS" phones. These types of wireless
phones can expose the user to measurable radio
frequency energy (RF) because of the short distance
between the phone and the user's head. These RF
exposures are limited by Federal Communications
Commission safety guidelines that were developed with
the advice of FDA and other federal health and safety
agencies. When the phone is located at greater distances
from the user, the exposure to RF is drastically lower
because a person's RF exposure decreases rapidly with
increasing distance from the source. The so-called
"cordless phones," which have a base unit connected to
the telephone wiring in a house, typically operate at far
lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
radio frequency energy (RF) in the microwave range
while being used. They also emit very low levels of RF
wheninthestand-bymode.WhereashighlevelsofRFcan
producehealtheffects(byheatingtissue),exposuretolow
level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level
Section 12: Health and Safety Information
179
RFexposureshavenotfoundanybiologicaleffects. Some
studies have suggested that some biological effects may
occur, but such findings have not been confirmed by
additionalresearch.Insomecases,otherresearchershave
had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new drugs
ormedicaldevices. However,theagencyhasauthorityto
take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the
user.Insuchacase,FDAcouldrequirethemanufacturers
ofwirelessphonestonotifyusersofthehealthhazardand
torepair,replaceorrecallthephonessothatthehazardno
longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
• Support needed research into possible biological effects of RF
of the type emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device function;
and
• Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use
on human health.
180
Consumer Information on Wireless Phones
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States must
comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health agencies
for safety questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than
thosetheycangetfromwirelessphones. Basestationsare
thus not the primary subject of the safety questions
discussed in this document.
Section 12: Health and Safety Information
181
What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy (RF)
exposures characteristic of wireless phones have yielded
conflicting results that often cannot be repeated in other
laboratories. A few animal studies, however, have
suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However,
many of the studies that showed increased tumor
development used animals that had been genetically
engineeredortreatedwithcancer-causingchemicalssoas
to be pre-disposed to develop cancer in absence of RF
exposure. Other studies exposedtheanimals toRFfor up
to22hoursperday.Theseconditionsarenotsimilartothe
conditions under which people use wireless phones, so
we don't know with certainty what the results of such
studies mean for human health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use of
wireless phones and primary brain cancer, glioma,
meningioma, oracousticneuroma, tumorsofthebrainor
salivary gland, leukemia, or other cancers. None of the
studiesdemonstratedtheexistenceofanyharmfulhealth
effects from wireless phones RF exposures. However,
noneofthestudiescananswerquestionsaboutlong-term
exposures, since the average period of phone use in these
studies was around three years.
182
Consumer Information on Wireless Phones
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and
epidemiologicalstudiesofpeopleactuallyusingwireless
phones would provide some of the data that are needed.
Lifetime animal exposure studies could be completed in
a few years. However, very large numbers of animals
would be needed to provide reliable proof of a cancer
promoting effect if one exists. Epidemiological studies
can provide data that is directly applicable to human
populations, but ten or more years' follow-up may be
needed to provide answers about some health effects,
such as cancer. This is because the interval between the
time of exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many years.
The interpretation of epidemiological studies is
hamperedbydifficultiesinmeasuringactualRFexposure
during day-to-day use of wireless phones. Many factors
affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
FDA has been a leading participant in the World Health
OrganizationinternationalElectromagneticFields(EMF)
Project since its inception in 1996. An influential result of
Section 12: Health and Safety Information
183
this work has been the development of a detailed agenda
ofresearchneedsthathasdriventheestablishmentofnew
researchprogramsaroundtheworld.TheProjecthasalso
helpeddevelopaseriesofpublicinformationdocuments
on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
andDevelopmentAgreement(CRADA)todoresearchon
wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone users.
The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we
do not know that there is - it is probably very small. But if
you are concerned about avoiding even potential risks,
you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a
key factor in how much exposure a person receives,
reducingtheamountoftimespentusingawirelessphone
will reduce RF exposure.
• If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a
184
Consumer Information on Wireless Phones
headset and carry the wireless phone away from your body or
use a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that
wireless phones are harmful. But if you are concerned
about the RF exposure from these products, you can use
measures like those described above to reduce your RF
exposure from wireless phone use.
What about children using wireless phones?
Thescientificevidencedoesnotshowadangertousersof
wirelessphones,includingchildrenandteenagers. Ifyou
want to take steps to lower exposure to radio frequency
energy (RF), the measures described above would apply
to children and teenagers using wireless phones.
Reducing the time of wireless phone use and increasing
the distance between the user and the RF source will
reduce RF exposure.
Some groups sponsored by other national governments
have advised that children be discouraged from using
wirelessphonesatall.Forexample,thegovernmentinthe
United Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly
precautionary;itwasnotbasedonscientificevidencethat
any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
Section 12: Health and Safety Information
185
believe that hands-free kits reduce risks. Hands-free kits
can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF
energyintheheadbecausethephone, whichisthesource
of the RF emissions, will not be placed against the head.
On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part
of the body will absorb more RF energy. Wireless phones
marketed in the U.S. are required to meet safety
requirementsregardlessofwhethertheyareusedagainst
the head or against the body. Either configuration should
result in compliance with the safety limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believethataccessories that claim toshieldtheheadfrom
thoseemissionsreducerisks.Someproductsthatclaimto
shield the user from RF absorption use special phone
cases, while others involve nothing more than a metallic
accessoryattachedtothephone.Studieshaveshownthat
these products generally do not work as advertised.
Unlike "hand-free" kits, these so-called "shields" may
interfere with proper operation of the phone. The phone
may be forced to boost its power to compensate, leading
to an increase in RF absorption. In February 2002, the
FederaltradeCommission(FTC)chargedtwocompanies
that sold devices that claimed to protect wireless phone
users from radiation with making false and
unsubstantiated claims. According to FTC, these
186
Consumer Information on Wireless Phones
defendantslackedareasonablebasistosubstantiatetheir
claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by
the Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort by
FDA, medical device manufacturers, and many other
groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers
and defibrillatorsaresafefromwirelessphoneEMI. FDA
has tested wireless phones and helped develop a
voluntary standard sponsored by the Institute of
Electrical and Electronic Engineers (IEEE). This standard
specifiestestmethodsandperformancerequirementsfor
hearing aids and wireless phones so that no interference
occurs when a person uses a compatible phone and a
compatible hearing aid at the same time. This standard
was approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmfulinterferencebefoundtooccur,FDAwillconduct
testing to assess the interference and work to resolve the
problem.
Section 12: Health and Safety Information
187
Additional information on the safety of RF exposures
from various sources can be obtained from the following
organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/
index.html
• National institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/topics/emf/
• World health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.hpa.org.uk/radiation/
• Updated 4/3/2002: US Food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicatebyvoice,almostanywhere,anytime.Butan
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such
188
Road Safety
as speed dial and redial. If available, these features help
you to place your call without taking your attention off
the road.
2. When available, use a hands-free device. If possible,
add an additional layer of convenience and safety to
your wireless phone with one of the many hands free
accessories available today.
3. Position your wireless phone within easy reach. Be able
to access your wireless phone without removing your
eyes from the road. If you get an incoming call at an
inconvenient time, let your Voice mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice and
even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while
driving. Jotting down a "to do" list or flipping through
your address book takes attention away from your
primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary.
If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then
continue.
Section 12: Health and Safety Information
189
7. Do not engage in stressful or emotional conversations
that may be distracting. Make people you are talking
with aware you are driving and suspend conversations
that have the potential to divert your attention from the
road.
8. Use your wireless phone to call for help. Dial 9-1-1 or
other local emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it is a free
call on your wireless phone!
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1
or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see
a broken-down vehicle posing no serious hazard, a
broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen,
call roadside assistance or other special non-emergency
number.
"The wireless industry reminds you to use your phone safely
when driving."
Formoreinformation,pleasecall1-888-901-SAFE,orvisit
our web-site www.wow-com.com
Provided by theCellularTelecommunications& Internet
Association.
190
Operating Environment
Operating Environment
Remember to follow any special regulations in force in
any area and always switch your phone off whenever it
isforbiddentouseit,orwhenitmaycauseinterferenceor
danger. When connecting the phone or any accessory to
another device, read its user's guide for detailed safety
instructions. Do not connect incompatible products.
Aswithothermobileradiotransmittingequipment,users
are advised that for the satisfactory operation of the
equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over
your shoulder if you are using an external antenna).
Using Your Phone Near Other Electronic Devices
Mostmodernelectronicequipmentisshieldedfromradio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker.
These recommendations are consistent with the
independent research and recommendations of Wireless
Technology Research.
Section 12: Health and Safety Information
191
Persons with pacemakers:
• should always keep the phone more than 15 cm (6 inches) from
their pacemaker when the phone is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Other Medical Devices
Ifyouuseanyotherpersonalmedicaldevices,consultthe
manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information.Switchyourphoneoffinhealthcarefacilities
whenanyregulationspostedintheseareasinstructyouto
do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consultthemanufacturerofanyequipmentthathasbeen
added to your vehicle.
Posted Facilities
Switchyourphoneoffinanyfacilitywherepostednotices
require you to do so.
192
Potentially Explosive Environments
Potentially Explosive Environments
Switchyourphoneoffwheninanyareawithapotentially
explosive atmosphere and obey all signs and
instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas),chemicalplantsorwhereblastingoperationsarein
progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below deck
on boats, chemical transfer or storage facilities, vehicles
using liquefied petroleum gas (such as propane or
butane), areas where the air contains chemicals or
particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
Emergency Calls
Thisphone,likeanywirelessphone, operatesusingradio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee
connectioninallconditions. Therefore, youshouldnever
rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember,tomakeorreceiveanycallsthephonemustbe
switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all
Section 12: Health and Safety Information
193
wireless phone networks or when certain network
services and/or phone features are in use. Check with
local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example),
youmayfirstneedtodeactivatethosefeaturesbeforeyou
can make an emergency call. Consult this document and
your local cellular service provider.
Whenmakinganemergencycall,remembertogiveallthe
necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off
the call until given permission to do so.
Restricting Children's access to your Phone
Yourphoneisnotatoy.Childrenshouldnotbeallowedto
play with it because they could hurt themselves and
others,damagethephoneormakecallsthatincreaseyour
phone bill.
194
FCC Notice and Cautions
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in
close proximity to receiving equipment. The FCC can
require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane
orbutane)mustcomplywiththeNationalFireProtection
Standard (NFPA-58). For a copy of this standard, contact
the National Fire Protection Association, One
Batterymarch Park, Quincy, MA 02269, Attn: Publication
Sales Division.
Cautions
Any changes or modifications to your phone not
expressly approved in this document could void your
warranty for this equipment, and void your authority to
operate this equipment. Only use approved batteries,
antennas and chargers. The use of any unauthorized
accessories may be dangerous and void the phone
warranty if said accessories cause damage or a defect to
the phone.
Althoughyourphoneisquitesturdy, itisacomplexpiece
ofequipmentandcanbebroken.Avoiddropping,hitting,
bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the
phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the
device.
Section 12: Health and Safety Information
195
• Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both
installed or portable wireless equipment in the area over the air
bag or in the air bag deployment area. If wireless equipment is
improperly installed and the air bag inflates, serious injury
could result.
• Switch your phone off before boarding an aircraft. The use of
wireless phone in aircraft is illegal and may be dangerous to
the aircraft's operation.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the offender, or
legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on
the signal strength in your area. Your phone informs you
of the current signal strength by displaying a number of
bars next to the signal strength icon. The more bars
displayed, the stronger the signal.
Ifyou'reinsideabuilding, beingnearawindowmaygive
you better reception.
Understanding the Power Save Feature
If your phone is unableto finda signal after 15 minutes of
searching, a Power Save feature is automatically
activated. If your phone is active, it periodically rechecks
196
Product Performance
service availability or you can check it yourself by
pressing any key.
Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your
phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver.
When it's turned on, it receives and transmits radio
frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This
power can range from 0.006 watts to 0.2 watts in digital
mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and accessories.
Faulty service may void the warranty.
There are several simple guidelines to operating your
phone properly and maintaining safe, satisfactory
service.
• If your phone is equipped with an external antenna, hold the
phone with the antenna raised, fully-extended and over your
shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing
the internal antenna could inhibit call performance.
• Speak directly into the phone's receiver.
Section 12: Health and Safety Information
197
• Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the power
off and remove the battery. If it is inoperable, call Customer
Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and
may require additional subscription and/or usage
charges. Not all features are available for purchase or use
inallareas.DownloadableRingTonesmaybeavailableat
an additional cost. Other conditions andrestrictions may
apply. See your service provider for additional
information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone
usage patterns and conditions. Battery power
consumption depends on factors such as network
configuration, signal strength, operating temperature,
features selected, frequency of calls, and voice, data, and
other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and
battery. If you suspect damage to the phone or battery, take it
to a service center for inspection.
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base station, it uses
less power; talk and standby time are greatly affected by the
signal strength on the cellular network and the parameters set
by the network operator.
198
Battery Precautions
• Follow battery usage, storage and charging guidelines found in
the user’s guide.
• Battery charging time depends on the remaining battery
charge and the type of battery and charger used. The battery
can be charged and discharged hundreds of times, but it will
gradually wear out. When the operation time (talk time and
standby time) is noticeably shorter than normal, it is time to
buy a new battery.
• If left unused, a fully charged battery will discharge itself over
time.
• Use only Samsung-approved batteries and recharge your
battery only with Samsung-approved chargers. When a charger
is not in use, disconnect it from the power source. Do not leave
the battery connected to a charger for more than a week, since
overcharging may shorten its life.
• Do not use incompatible cell phone batteries and chargers.
Some websites and second-hand dealers, not associated with
reputable manufacturers and carriers, might be selling
incompatible or even counterfeit batteries and chargers.
Consumers should purchase manufacturer or carrier
recommended products and accessories. If unsure about
whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
• Extreme temperatures will affect the charging capacity of your
battery: it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity
and lifetime of the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged.
Li-ion batteries are particularly affected by temperatures below
0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as
on or near a cooking surface, cooking appliance, iron, or
radiator.
Section 12: Health and Safety Information
199
• Do not get your phone or battery wet. Even though they will dry
and appear to operate normally, the circuitry could slowly
corrode and pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can
occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and - terminals of the battery (metal
strips on the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with
metal objects, such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the
battery as this can cause an internal short-circuit, resulting in
overheating.
• Dispose of used batteries in accordance with local regulations.
In some areas, the disposal of batteries in household or
business trash may be prohibited. For safe disposal options for
Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a
fire.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years.
• Keep the phone and all its parts and accessories out of the
reach of small children.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an
electric shock to you or damage to the phone.
200
Care and Maintenance
• Do not use or store the phone in dusty, dirty areas, as its
moving parts may be damaged.
• Do not store the phone in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms
up to its normal operating temperature, moisture can form
inside the phone, which may damage the phone's electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough handling can
break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
• Do not paint the phone. Paint can clog the device's moving
parts and prevent proper operation.
• Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may explode
when overheated.
• If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized
antennas or modified accessories may damage the phone and
violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.
Section 12: Health and Safety Information
201
202
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P.
("SAMSUNG") warrants to the original purchaser
("Purchaser") that SAMSUNG's Phones and accessories
("Products") are free from defects in material and
workmanship under normal use and service for the
period commencing upon the date of purchase and
continuingforthefollowingspecifiedperiodoftimeafter
that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
WhatisNotCovered?ThisLimitedWarrantyisconditioned
upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting
from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of
any part of Product, including antenna, or cosmetic
damage; (b) equipment that has the serial number
removedormadeillegible;(c)anyplasticsurfacesorother
externally exposed parts that are scratched or damaged
duetonormaluse;(d)malfunctionsresultingfromtheuse
of Product in conjunction with accessories, products, or
204
Standard Limited Warranty
ancillary/peripheral equipment not furnished or
approved by SAMSUNG; (e) defects or damage from
impropertesting,operation,maintenance,installation,or
adjustment; (f) installation, maintenance, and service of
Product, or (g) Product used or purchased outside the
United States or Canada. This Limited Warranty covers
batteries only if battery capacity falls below 80% of rated
capacity or the battery leaks, and this Limited Warranty
does not cover any battery if (i) the battery has been
chargedbyabatterychargernotspecifiedorapprovedby
SAMSUNG for charging the battery, (ii) any of the seals
onthebatteryarebrokenorshowevidenceoftampering,
or (iii)thebattery has been used in equipmentotherthan
the SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG's sole option, without charge to Purchaser,
any defective component part of Product. To obtain
service under this Limited Warranty, Purchaser must
return Product to an authorized phone service facility in
an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof
ofsaleshowingthedateofpurchase, theserialnumber of
Product and the sellers' name and address. To obtain
assistance on where to deliver the Product, call Samsung
Customer Care at 1-888-987-4357. Upon receipt,
SAMSUNG will promptly repair or replace the defective
Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components
when repairing any Product or replace Product with a
rebuilt, reconditioned or new Product. Repaired/
replaced leather cases, pouches and holsters will be
Section 13: Warranty Information
205
warranted for a period of ninety (90) days. All other
repaired/replacedProductwillbewarrantedforaperiod
equal to the remainder of the original Limited Warranty
ontheoriginalProductorfor90days,whicheverislonger.
All replaced parts, components, boards and equipment
shall become the property of SAMSUNG. If SAMSUNG
determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts,
shipping,andlaborchargesfortherepairorreturnofsuch
Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPTASSETFORTHINTHEEXPRESSWARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE
ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO.
NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN
206
Standard Limited Warranty
EXPRESS WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE
BY OPERATION OF LAW, INCLUDING IF
APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO
THE SAME DURATION OF TIME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME
STATES/PROVINCES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION
MAYNOTAPPLYTOYOU.INADDITION,SAMSUNG
SHALLNOTBELIABLEFORANYDAMAGESOFANY
KIND RESULTING FROM THE PURCHASE, USE, OR
MISUSE OF, OR INABILITY TO USE THE PRODUCT
OR ARISING DIRECTLY OR INDIRECTLY FROM THE
USE OR LOSS OF USE OF THE PRODUCT OR FROM
THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIALORSIMILARDAMAGES, ORLOSS
OF ANTICIPATED PROFITS OR BENEFITS, OR FOR
DAMAGES ARISING FROM ANY TORT (INCLUDING
NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BY SAMSUNG, ITS AGENTS OR
EMPLOYEES, OR FOR ANY BREACH OF CONTRACT
OR FOR ANY CLAIM BROUGHT AGAINST
PURCHASER BY ANY OTHER PARTY. SOME STATES/
PROVINCES DO NOT ALLOW THE EXCLUSION OR
LIMITATIONOFINCIDENTALORCONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU. THIS
Section 13: Warranty Information
207
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
ANDYOUMAYALSOHAVEOTHERRIGHTS,WHICH
VARY FROM STATE TO STATE/PROVINCE TO
PROVINCE. THIS LIMITED WARRANTY SHALL NOT
EXTENDTOANYONEOTHERTHANTHEORIGINAL
PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY
PORTION OF THIS LIMITED WARRANTY IS HELD
ILLEGALORUNENFORCEABLEBYREASONOFANY
LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS
LIMITED WARRANTY WHICH PURCHASER
ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS
LIMITED AS THE LAW PERMITS. THE PARTIES
UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN
CONJUNCTION WITH THE PRODUCT. SAMSUNG
MAKES NO WARRANTIES OR REPRESENTATIONS
AND THERE ARE NO CONDITIONS, EXPRESS OR
IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY
THIRDPARTY SOFTWARE OR EQUIPMENT,
WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT
DISTRIBUTED BY SAMSUNG OR OTHERWISE,
INCLUDING THE ABILITY TO INTEGRATE ANY
SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES,
OPERATIONS, PERFORMANCE AND SUITABILITY
208
Standard Limited Warranty
OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER
OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG's
Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited
Warranty. The agents, employees, distributors, and
dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make
additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer
advertising or presentation, whether oral or written, do
not constitute warranties by SAMSUNG and should not
be relied upon.
Samsung Telecommunications America, L.P.
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2006SamsungTelecommunicationsAmerica.Allrights
reserved.
No reproduction in whole or in part allowed without
prior written approval. Specifications and availability
subject to change without notice.
Printed in Korea.
Section 13: Warranty Information
209
210
Call records 30
Correcting the Number 26
Ending a Call 27
Making a Call 26
Making a Call from Phone-
book 28
Index
A
Accessing a Menu Function
Redialing Last Number 27
Silent mode 34
Alarm 144
Alert type 110
B
Backlight
description 21
settings 107
Call Records
All calls 30
Call time 33
Delete all 32
Incoming calls 32
Missed calls 31
Outgoing calls 32
Battery
charging 8
installing 8
low indicator 10
Caller group 67
Caller ID 115
Bluetooth
About 116
Camcorder 155
Features 117
Searching for new devices
Security modes 117
Settings 116
Turning Bluetooth On and Off
Visibility 116
recording video 160
taking photos 156
Change password 119
Charging battery 8
D
Dialing display 108
Bluetooth Help 118
Broadcast Messages 97
C
Display
backlight 21
icons 20
DTMF 38
E
Calendar 145
Call Barring 113
Entering Text 51
Changing the Text Input
Mode 52
Call Functions 25
Adjusting the Call Volume 28
Answering a Call 29
211
Using ABC Mode 54
Using Number Mode 57
Using Symbol Mode 57
Using T9 Mode 56
Memory card 132
Menu Navigation 43
Menu Outline 45
Message settings 96
Message Tone 111
Messages 75
F
Fun & Apps 123
Functions and Options 34
G
Games 134
Get More Help 22
Getting Started 5
Activating Your Phone 6
Voice mail 11
Messaging
Types of Messages 76
micro SD memory card 132
Missed Call
Viewing 31
Multi-Party Call 39
Dropping One Participant 40
Private Conversation 39
Setting up 39
Music player 135
Mute 37
H
Health and Safety Informa-
tion 175
My files 124
I
Icons, description 20
Instant Messaging 98
International Call 26
K
Keypad 110
Keypad Tone 110
My Name Card 70
My photos
accessing pictures 162
My videos 164
N
Network Selection 114
L
Lock application 120
Low battery indicator 10
M
Making a Call
Phonebook 28
Network Services
Call Barring 113
Call Forwarding 112
Call Waiting 114
Caller ID 115
Network Services Settings
212
R
Number mode 52
Reset settings 122
Ring Volume 110
S
Security settings 118
Sentbox 91
O
On/off switch, phone 11
Options
During a Call 36
Putting a Call on Hold 37
Settings 101
Organizer 144
Alarm 144
Bluetooth 116
Display 106
Phone 103
Reset 122
Security 118
Sound Settings 109
Time & Date 102
Voice recognition 142
Calculator 151
Calendar 145
Stopwatch 153
Tasks 150
Timer 153
Unit conversion 152
World time 152
Own Number 71
Shortcuts 45
Silent mode 111
P
Phone
SIM card
icons 20
switching on/off 11
installing 6
Soft Keys 34
Phone lock 119
Phone Settings 103
Phonebook
Software update 121
Speakerphone 42
Speed Dial
Setting Up Entries 66
Standard Limited Warranty
Searching for a Number 40
Phonebook Management 72
Picture Messages 81
PIN
Stopwatch 153
change 118
check 118
Storing a number
Phone’s Memory 60
SIM Card 61
Push message
viewing in Inbox 89
Switching on/off
phone 11
213
Symbol mode 52
Voice recognition 136
VoiceSignal
T
checking phone status 141
digit dial 137
T9 mode 52
Templates 93
Text input mode
changing 52
features 137
menu 136
name dial 138
Text Messages 78
Timer 153
Travel adapter 8
t-zones 170
Entering Text 171
Exiting 170
name lookup 139
open applications 140
send text message 139
W
Warranty Information 203
Navigating 171
U
Understanding Your Phone 15
View of Your Phone 16
Understanding Your Phone-
book 59
Finding a Phonebook Entry
Finding My Phone Number
Management 72
Update your phone software
V
Videos 130
changing number 12
Voice Messages 76
Voice notes 76
214
|