Samsung Katalyst SGH T739 User Manual

Samsung Katalyst  
P O R T A B L E Q u a d - B A N D  
M O B I L E  
P H O N E  
User Manual  
Please read this manual before operating your  
phone, and keep it for future reference.  
Disclaimer of Warranties; Exclusion of Liability  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE  
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE  
PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF  
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT  
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY  
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE  
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE  
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE  
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR  
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION  
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY  
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,  
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING  
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF  
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL  
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.  
T739_UVGI4_CH_101507_F9  
Table of Contents  
1
Table of Contents  
2
3
Section 1: Getting Started  
Topics Covered  
This section explains how to start using your phone by first configuring your  
hardware, activating your service, and then setting up your voice mail.  
Activating Your Phone  
When you subscribe to a cellular network, you are provided with a plug-in SIM card  
loaded with your subscription details, such as your PIN, available optional services,  
and many others features.  
Installing the SIM Card  
Important!: The plug-in SIM card and its contacts information can be easily damaged by scratching or  
bending, so be careful when handling, inserting, or removing the card. Keep all SIM cards out  
of reach of small children.  
If necessary, switch off the phone by holding down the  
image displays.  
key until the power-off  
1. Remove the battery cover by sliding the battery cover down (in the  
direction of the arrow).  
5
         
Activating Your Phone  
2. Carefully lift the battery cover away from the bottom of the phone.  
3. Carefully slide the SIM card under the metal bracket and into the SIM card  
socket until the card locks into place. Make sure that the card’s gold  
contacts face into the phone and that the upper-left angled corner of the  
card is positioned as shown below.  
K
C
LO  
OCK  
UNL  
K
C
LO  
CK  
O
UNL  
Note: If the card is not inserted correctly, the phone does not detect the SIM card. Remove the battery and  
re-orient the card back into the slot.  
K
C
LO  
OCK  
UNL  
K
C
LO  
OCK  
UNL  
Getting Started  
6
Inserting the Memory Card  
Your phone supports an optional memory card (microSD™) for data storage of such  
things as music, pictures, video or other files. This type of memory card is designed  
for use with this mobile phone and other devices.  
Note: The Samsung Katalystsupports up to a 2 Gigabyte memory card.  
1. To unlock the memory cover, use your thumb to slide the memory card  
cover to the Unlock position (as indicated) until you hear a slight clicking  
sound.  
K
C
LO  
OCK  
UNL  
K
C
O
L
K
C
O
L
N
U
7
     
Activating Your Phone  
2. Gently lift upward on the edge of the memory card cover.  
3. Place the microSD card into the slot (as shown below). Ensure the  
microSD’s gold contact pins face downward and the card is placed so that  
the indentations on the card face the same direction as those illustrated.  
Getting Started  
8
4. Close and lock the memory card cover:  
(1) close the memory card cover using your thumb to push the cover down  
(as shown below).  
(2) slide the memory card cover back into the Lock position.  
K
C
LO  
OCK  
UNL  
L
K
C
O
L
K
C
O
N
U
Removing the memory card  
2. Carefully remove the memory card.  
3. Close and lock the memory card cover:  
(1) close the memory card cover using your thumb to push the cover down (as  
shown below).  
(2) slide the memory card cover back into the Lock position.  
Installing the Battery  
1. With the cover removed, verify the SIM card is securely inserted.  
2. Install the battery by aligning its 3 brass tabs to those located at the bottom  
of the battery compartment (1). The arrow on the battery should be  
pointing towards the prongs.  
9
   
Activating Your Phone  
3. Press the battery down until it clicks into place (2).  
4. Make sure that the battery is properly installed before switching on the  
phone.  
5. Reinstall the battery cover by sliding it back onto the phone until you hear it  
securely click. Make sure the battery is properly installed before switching  
on the phone.  
Getting Started 10  
Charging a Battery  
Your phone is powered by a rechargeable Li-ion battery. A travel adapter, which is  
used for charging the battery, is included with your phone. Use only approved  
batteries and chargers. Ask your local Samsung dealer for further details.  
You can use the phone while the battery is charging, but doing so requires additional  
charging time.  
Note: You must fully charge the battery before using your phone for the first time. A discharged battery  
recharges fully in approximately 4 hours.  
1. With the battery installed, temporarily remove the plastic cover on the left  
side of the phone and plug in the travel adapter’s connector into the jack.  
Important!: Verify that the handset battery is installed prior to connecting the travel adapter. If the battery  
is not installed and the travel adapter is connected the handset continuously power cycles and  
prevents proper operation.  
11  
   
Activating Your Phone  
Note: The following illustration is the incorrect method for connecting the charger. If attempted, damage to  
the accessory port occurs therefore voiding the phone’s warranty.  
+
Incorrect  
Correct  
2. Plug the adapter into a standard AC wall outlet.  
Note: For connection to an electrical supply not located in the U.S., you must use an adaptor of the proper  
configuration for the power outlet. Use of the wrong adapter could damage your phone and void your  
warranty.  
3. When charging is finished, unplug the Travel Adapter from the power outlet  
and then disconnect it from the phone.  
4. Resecure the plastic cover over the interface jack on the phone.  
Getting Started 12  
Warning!: You must unplug the Travel Adapter before you remove the battery from the phone during  
charging; otherwise, the phone could be damaged.  
Low Battery Indicator  
When the battery is weak and only a few minutes of talk time remain, a warning tone  
sounds and the “Warning low battery” message repeats at regular intervals on the  
display. When this happens, your phone turns off the backlight to conserve the  
remaining battery power.  
When the battery level becomes too low, the phone automatically turns off.  
Switching the Phone On or Off  
1. Press and hold the  
key until the phone switches on.  
2. If the phone asks for a PIN, enter the PIN and press the OK soft key or the  
3. If the phone prompts “View Tutorial and connect to Wi-Fi?” press the  
Yes softkey, or otherwise press the No soft key to continue.  
The phone searches for your network and after finding it, the T-Mobile icon  
“T” displays on the lower right half of your screen. Now you can make or  
receive calls.  
Note: The display language is preset to English at the factory. To change the language, use the Language  
4. When you wish to switch off the phone, press and hold the  
key until  
the power-off image displays.  
Setting Up Your Voice Mail  
For new users, follow the instructions below to set up voice mail:  
1. In Idle mode, press and hold the  
key on the keypad.  
You may be prompted to enter a password.  
2. Follow the tutorial to create a password, a greeting, and your name.  
Note: These steps may be different depending on your network.  
13  
             
Setting Up Your Voice Mail  
Accessing Your Voice Mail  
You can press and hold the key on the keypad or use the phone’s menu to  
access your voice mail. To access voice mail using the menu:  
1. In Idle mode, press the Menu soft key.  
2. Highlight Messages and press the Select soft key or the  
3. Highlight Voice mail and press the Select soft key or the  
key.  
key.  
4. Highlight Call voice mail and press the Select soft key or the  
key.  
Your phone dials the specified voice mail number.  
5. When connected, follow the voice prompts from the voice mail center.  
Changing the Voice Mail Number  
Your SIM card gives you the default service number of the voice mail center.  
However, should you need to change the number, use the following procedures:  
1. In Idle mode, press the Menu soft key to access the Menu mode.  
2. Highlight Messages and press the Select soft key or the  
key.  
key.  
3. Highlight Voice mail and press the Select soft key or the  
4. Highlight Voice server number and press the Select soft key or the  
key.  
5. Highlight Voice Mail and press the Options soft key.  
6. Highlight Edit and press the Select soft key or the  
key.  
7. Edit the name if desired, and then press the Down Navigation key to edit  
the number. Editing can be done by using the  
key to delete numbers  
and then using the keypad to enter a new number.  
8. Press the Options soft key, highlight the Save option, and press the Select  
soft key or the  
key.  
9. Press the  
key to return to Idle mode.  
Getting Started 14  
   
Section 2: Understanding Your Phone  
Topics Covered  
This section outlines some key features of your phone. It also displays the screen and  
the icons that display when the phone is in use.  
Features of Your Phone  
Your phone is lightweight, easy-to-use and offers many significant features. The  
following list outlines a few of the features included in your phone.  
1.3 Megapixel Camera with 4x Digital Zoom  
Bluetooth® Wireless Technology  
T-Mobile HotSpots @ HOME (Wi-Fi connectivity)  
User friendly, menu driven access to features and options  
Instant Messaging capability  
Sound/Image media capability  
Fun & Apps feature provides files, games, camera, alarm, calendar, calculator, tip  
calculator, notes, world time, unit conversion, timer, stopwatch, music player,  
voice recognition, image editor, synchronization and tasks.  
15  
       
Open View of Your Phone  
Open View of Your Phone  
The following illustrations show the main elements of your phone:  
1. Earpiece  
14. Display  
13. Navigation  
(Up/Down/Left/Right) keys  
12. Right Soft key  
2. Volume keys  
3. Left Soft key  
11. OK (Select) key  
4. Send key  
5. Cancel/Clear key  
6. Voice mail key  
10. Power On/Off  
(Exit) key  
7. Alphanumeric  
keys  
9. Microphone  
8. Special function keys  
Keys  
The following list correlates to the illustrations.  
1. Earpiece allows you to hear the other caller and the different ring tones or  
sounds offered by your phone.  
2.  
Volume keys allow you to adjust the ring volume in standby mode (with  
When  
the phone open) or adjust the Speaker volume during a call.  
receiving an incoming call, if you press the volume key, you can mute the  
ring tone. If you press and hold the volume key, you can reject the call.  
3. Left Soft key allows you to select soft key actions or menu items  
corresponding to the bottom left line on the display screen.  
4. Send key allows you to make or answer a call. In Idle mode, recalls the  
last number dialed or received when held down.  
5. Cancel/Clear key deletes characters from the display. In Menu mode, this  
key returns you to the previous menu level.  
Understanding Your Phone 16  
       
6. Voice mail key allows you to quickly access your voice mail. Press and  
hold this key for two seconds to automatically dial your voice mail’s phone  
number.  
7. Alphanumeric keys allow you to enter numbers, letters, and some special  
characters.  
8. Special function keys allow you activate unique features while in Idle  
mode. In Idle mode, if you press and hold the  
the Silent Mode. In Idle mode, if you press and hold the  
turn on the Voice Command application.  
key, you can turn on  
key, you can  
9.  
during phone calls and allows other callers to hear  
Microphone is used  
you clearly when you are speaking to them. It is also used in making voice  
note recordings.  
10. Power On/Off (Exit) key ends a call. Press and hold this key for two  
seconds to turn your phone on or off. While in the Menu mode, it returns  
the phone to Idle mode and then cancels your input.  
11. OK (Select) key allows you to accept the choices offered when navigating  
through a menu.  
12. Right Soft key allows you to select soft key actions or menu items  
corresponding to the bottom right line on the display screen. It also  
provides quick access to your t-zones.  
13. Navigation key scrolls through the phone’s menu options and acts as a  
shortcut key from standby mode.  
In Menu mode, scrolls through the phone’s menus and Phonebook.  
In Idle mode:  
Down key: allows you to directly access your Contact list.  
Up key: allows you to directly access the Call records feature.  
Left key: allows you to directly access Text messaging (New Message).  
Right key: allows you to directly access Voice note.  
Note: SIM-dependent features may alter the functionality of the Navigation keys.  
Tip: When entering text, use the Left or Right Navigation key to mark the position of the cursor.  
14. Display shows all the information needed to operate your phone, such as  
the received signal strength, phone battery level, and time.  
17  
Closed View of Your Phone  
Closed View of Your Phone  
The following illustrations show the external elements of your phone  
3. External display  
2. Camera key  
1. Power/Accessory  
Interface  
connector  
1. Power/Accessory Interface connector allows you to connect a power  
cable or optional accessories, such as a USB/data cable or a hands-free  
headset for convenient, hands-free conversations.  
2. Camera key allows you to take pictures when you are in camera mode.  
Launches the camera with a press.  
3. External display shows the received signal strength, phone battery level,  
and the time and date.  
Understanding Your Phone 18  
   
Rear View of Your Phone  
The following illustrations show the camera lens.  
1. Camera lens  
2. External Speaker  
1. Camera lens is used to take pictures.  
2. External Speaker allows you to hear the different ring tones/sounds, work  
with the speakerphone, and to hear audio during a video playback.  
Display Layout  
Your phone’s display screen provides a wealth of information about your phone’s  
status and options. When the backlight turns on, both the display turns on and the  
keypad is illuminated. This display indicates when you receive either an incoming  
call or message and also displays any alarms for the specified time. The display also  
shows the date and current time as a digital clock. The display has three main areas:  
Icons  
Text and graphics area  
Menu  
t-zones  
Soft key function indicators  
19  
   
Display Layout  
Icons  
This list identifies the symbols you’ll see on your phone’s display screen:  
Displays the received signal strength. The greater the number of bars, the  
stronger the signal.  
Displays the UMA signal strength. The greater the number of bars, the  
stronger the signal.  
Displays when a microSD card is detected.  
Displays when a new text message was received.  
Displays when a new multimedia message was received.  
Displays when you set an alarm to ring at a specified time. For more details,  
Displays when you are out of your service area.  
Displays when a call is in progress.  
Displays when the Call Forwarding feature is active. For more details, see  
Displays when Alert type is vibration or you set the phone to vibrate when  
you receive a call.  
Displays when the speaker is enabled during an active call.  
Displays when Mute is enabled during an active call.  
Displays when Silent Mode is active.  
Displays while your phone is synchronizing data with the network.  
Shows the level of your battery. The more bars you see, the more power  
remains.  
Displays when Bluetooth wireless technology is active.  
Understanding Your Phone 20  
 
Backlight  
A backlight illuminates the display and the keypad. When you press any key, the  
backlight comes on. It goes off when no keys are pressed within a given period of  
time, depending on the setting within the Backlight menu. The display turns off  
after one minute to conserve battery power.  
The On setting is how long the keypad backlight is on. The Dim option is how much  
longer after the keypad backlight goes off that the display remains lit.  
To specify the length of time the backlight is active, access the Backlight menu:  
1. In Idle mode, press the Menu soft key to access the Menu mode.  
2. Using the Navigation keys, scroll to the Settings icon. Press the Select  
soft key or the  
3. Highlight the Display settings option and press the Select  
the key.  
key to enter the menu.  
soft key or  
soft key or the  
4. Highlight the Backlight option and press the Select  
key.  
5. Highlight the On option. Use the Left or Right Navigation key to select the  
time the backlight is on. You may choose between 15 sec, 30 sec, 1 min,  
3 min, or 10 min.  
6. Press the Down key to take you to the Dim option. Use the Left or Right  
Navigation key to select the time the Dimming mode is on. You may choose  
between Off, 15 sec, 30 sec, 1min, 3 min, or 10 min.  
7. Press the Save soft key to retain your new settings.  
21  
 
Help  
Help  
Help is designed to work with t-zones to show you some of the unique features of  
your phone. You can search help files on the fly while traveling, at home or  
anywhere, using help.wap.t-mobile.com.  
1. In Idle mode, press the Menu soft key to access the Menu mode.  
2. Using the Navigation keys, scroll to the Help icon. Press the Select  
key or the key.  
3. The T-Mobile Help menu displays with the following options available:  
soft  
Browse Help Topics: this option gives you a list of different topics from which  
you can select.  
Enter a Search: this option allows you to search based on a keyword.  
My Account: this option provides you with account specific information such as  
your current status, current activity, Bill Summary, Plan & Services, Voicemail  
Settings, Find a Retail Store, and FAQ’s & Info.  
About: this option offers general information about T-Mobile Help including  
concept and site design, copyright information, and contact email address.  
To access the browser options menu:  
Press the Options soft key.  
- Or -  
Highlight the Openwave icon at the top left of the page by pressing the  
Up or Down keys and then press the  
key.  
Note: The menus may vary, depending on your t-zones subscription.  
For more information on browser options, see "Selecting and Using Menu Options"  
Understanding Your Phone 22  
   
Section 3: Wi-Fi  
Topics Covered  
This section introduces you to T-Mobile Wi-Fi compatibility and provides information  
on Wi-Fi and instructions on how to use this type of connection with your phone.  
Introducing Your T-Mobile HotSpot @Home  
Capable Phone  
Your phone is capable of connecting to T-Mobile via Wi-Fi (wireless Internet  
broadband) and GSM (cellular towers). When making voice calls or using data  
connections, your phone seamlessly transfers between Wi-Fi and GSM connections,  
always using the network with the best signal strength.  
Your T-Mobile Wi-Fi compatible phone is capable of the following:  
Connect to Wi-Fi at Home  
Connect to T-Mobile through Wi-Fi if you have a wireless router set up in  
your home. Refer to the Get Started Poster (provided with your phone) and  
the User Guide for your wireless router for more information.  
23  
     
Introducing Your T-Mobile HotSpot @Home Capable Phone  
Connect to Wi-Fi while you're on the go (hotspots)  
Connect to T-Mobile HotSpot locations all across the U.S. without needing  
a T-Mobile HotSpot username and password as well as any open Wi-Fi  
access point.  
Connect to GSM  
Connect to the GSM network when Wi-Fi is not available or if you are not  
interested in connecting to Wi-Fi.  
Here's How it Works  
Rather than using GSM radio as your phone normally would to connect to cellular  
towers, your T-Mobile Wi-Fi compatible phone uses UMA (Unlicensed Mobile Access)  
technology to use a wireless broadband Internet connection for your mobile phone  
services. This includes voice calls, mobile browsing, e-mail, Picture Messaging, Text  
Messaging, and basically any mobile service for which your phone uses a network  
connection.  
UMA technology offers fast, reliable connectivity using your mobile phone for  
virtually all of your communications. UMA connects your mobile phone to your GSM/  
GPRS services through WLAN (802.11) and allows you to handle calls, send and  
receive messages, and check your e-mail. This technology allows you to use your  
mobile phone in all of the ways you normally do. The only difference with using UMA  
technology is that you are connecting through a wireless broadband Internet  
connection (Wi-Fi).  
What is Wi-Fi?  
Wi-Fi, or Wireless Fidelity, is a term that is used generically to refer to any product or  
service using any type of 802.11 technology. Wi-Fi networks operate in the  
unlicensed 2.4 GHz radio bands, operating at up to an 11 Mbps (802.11b) or 54  
Mbps (802.11g) data rate.  
Wi-Fi enabled devices (laptops and PDAs as well as UMA phones) can send and  
receive data wirelessly from any location equipped with Wi-Fi access. This is  
accomplished using wireless routers, installed within a Wi-Fi location. A wireless  
router transmits an RF signal to Wi-Fi enabled devices that are within range of the  
router. Depending on the particular router, its range is usually about 300 feet. The  
speed of the transmission is governed by the speed of the internet connection fed  
into the wireless router.  
Wi-Fi 24  
What This Means to You  
When you are not in range of a Wi-Fi connection, your normal cellular network takes  
over and keeps you connected. Your phone switches automatically from Wi-Fi to  
cellular whenever it's necessary to maintain your connection, whether your phone is  
in Idle mode or in the middle of an active call. The switching process is virtually  
unnoticeable.  
Warning!: 9-1-1 Emergency Service available over Wi-Fi may be limited (it won’t work during electrical  
power or broadband outages). Before using this phone to make calls over Wi-Fi, you MUST  
provide us with the primary street address where you will use HotSpot @Home service, and you  
must furnish us with any address changes. Refer to T-Mobile’s Terms and Conditions for other  
limitations and information.  
Connecting to Wi-Fi for the First Time  
Important!: You must set up your wireless router first before using your phone to connect to Wi-Fi. For  
T-Mobile routers, run the CD that comes with the router and follow its instructions. If you have  
a different router, follow its installation procedures and confirm the router is set up properly.  
1. Press and hold the  
key to power on your phone.  
2. Your phone displays a tutorial prompt. Select Yes to run the brief tutorial.  
3. At the end of the tutorial, your phone detects a Wi-Fi network and attempts  
to connect to it. If your router requires a security key, it prompts you to  
enter it. For T-Mobile routers, select Get Security Key, which automatically  
provides security keys for T-Mobile routers (see "Get Security Key" on  
25  
   
Using Wi-Fi  
If you have a T-Mobile router, select Yes. This action acquires the security  
key or passphrase so that you are not required to manually type it into your  
phone.  
If you do not have a T-Mobile router, select No. You are then required to  
enter your key or passphrase.  
If you are not sure what your key or passphrase (WEP or WPA encryption)  
is, please refer to your router documentation. (For T-Mobile routers see  
4. Save the network when prompted. After the network saves to your Saved  
Networks list, you automatically connect to that network each time you are  
You are connected to your first Wi-Fi network and can begin making calls using Wi-Fi  
or your regular T-Mobile GSM network.  
To access all of the Wi-Fi features on your phone, go to Menu > Settings > Wi-Fi.  
If the Tutorial does not display on your phone, see "Connecting to Wi-Fi Networks"  
Using Wi-Fi  
Once set up for Wi-Fi connectivity, your phone automatically uses Wi-Fi, when  
available, for all your mobile phone services. You simply use your phone in a normal  
manner; there is nothing special you need to do. Your phone switches automatically  
between Wi-Fi and cellular whenever it's necessary to maintain your connection,  
whether your phone is idle or on an active call. When connected to Wi-Fi, the signal  
bars change and the wireless network name displays in the upper left of the idle  
screen as shown in the following illustration.  
Wi-Fi signal bars  
Wireless  
@Home48C2  
network name  
Wi-Fi 26  
 
The signal bars are always visible when a call is active. The bars change correctly  
when you are on a call to indicate which network you are on. The name of your  
network displays on the idle screen as seen here.  
Connecting to Wi-Fi Networks  
Connecting to Wi-Fi networks with your phone allows you to make calls using Wi-Fi.  
The following features were designed to keep you connected to the networks you  
want:  
View available networks  
View saved networks that you use often  
Find open networks quickly (Quick Connect)  
Available Networks  
This list of available networks displays all the available Wi-Fi networks to which you  
can connect. The networks are listed in the order of their signal strength, from the  
strongest signal to the weakest.  
Note: If you want to connect to a secure network (marked by a key icon), you are prompted to provide the  
security key for that network. If you change the router settings, you can edit the phone's profile with  
the new setting or you can create a new phone profile.  
signal-strength  
indicates that a network is connected.  
indicatesthatanetworkwassavedtoyourSaved Networkslist(see  
next section for details).  
indicates that a network is protected with a security key. For more  
Note: Set up your wireless router first. For T-Mobile routers, run the CD that comes with the router and  
follow its instructions. If you have a different router, follow its installation procedures and confirm the  
router is set up properly.  
27  
     
Connecting to Wi-Fi Networks  
Connect to Wi-Fi from the Available Networks  
1. From the idle screen, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, highlight Settings and press the Select soft key  
to enter the menu.  
3. Highlight the Wi-Fi option and press the Select soft key or the  
4. Highlight the Available Networks option and press the Select soft key or  
the key.  
key.  
5. The phone searches for all available networks and then displays a list of  
available networks.  
6. Highlight the network to which you want to connect and press the Options  
soft key. Highlight the Connect option, and press the Select soft key or  
the  
key. Once you have established an active connection, you are  
prompted to save the network.  
7. When prompted, press the Yes soft key to save the network to your Saved  
Networks list.  
8. Create a profile name for your network, press the Options soft key, select  
Save and press the Select soft key or the  
key.  
Wi-Fi 28  
After the network saves to your Saved Networks list, you automatically  
connect to that network each time you are within range (see "Saved  
On the Available Networks list, a checkmark indicates a network to which you are  
currently connected, a star indicates a saved network, and a key indicates a network  
is protected with a security key.  
current network connection  
stored network  
security key protected  
signal-strength  
Note: Press the Back soft key from the Available Networks list to return to the Wi-Fi menu.  
Available Networks Options  
From the Available Networks menu, press the Options soft key to use the following  
options:  
Connect: Connects your phone to the currently highlighted network. This option  
will not be available if your phone is currently connected to a Wi-Fi network.  
Alternatively, you can connect to a network on the Available by highlighting the  
network Networks list by highlighting the network and pressing the Select soft  
key.  
Refresh: Refreshes the list of available networks to include any recent changes,  
for example new Wi-Fi networks recently set up or others that were removed from  
service.  
29  
Connecting to Wi-Fi Networks  
View details: Displays the details for the currently highlighted Wi-Fi network. This  
also includes the MAC address of the phone if needed for MAC address filtering.  
Save: Saves the selected network to your Saved Networks List. This option  
displays only if the network is not already saved.  
Saved Networks  
The Saved Networks list displays all of the Wi-Fi networks that are saved on your  
phone. If you set up your phone for automatic connections, you automatically  
connect to a Wi-Fi network on your Saved Networks List each time you are within  
range of that network. On the Saved Networks List, a  
which you are currently connected.  
indicates a network to  
Important!: Networks displayed on the Saved Networks List are networks that are saved and not  
necessarily those that are in range and available. Editing a saved network's profile name will  
not affect the ability to connect to that network. However, changing the SSID field or security  
settings will impact the ability to connect.  
If you change the router settings, you can edit the phone's profile with the new setting or you  
can create a new phone profile.  
Note: The Samsung phone has 2 Default profiles on the Saved Networks list: HotSpot and @Home. This  
will allow the phone to automatically connect at the T-Mobile HotSpot locations and out-of-the-box to  
your unsecured T-Mobile router.  
Connect to a Specific Saved Network  
1. From the idle screen, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to Settings. Press the Select soft key to  
enter the menu.  
3. Highlight the Wi-Fi option and press the Select soft key or the  
key.  
4. Highlight the Saved Networks option and press the Select soft key or the  
key. The phone displays your Saved Networks list.  
5. Highlight the network to which you want to connect and press Options >  
Connect. Your phone connects to the Wi-Fi network if it is available.  
6. On the Saved Networks list, a checkmark then indicates a network to  
which you are currently connected.  
Note: Press the Back soft key from the Saved Networks list to return to the Wi-Fi menu.  
Wi-Fi 30  
 
Saved Networks Options  
In the Saved Networks menu, press the Options soft key to use the following  
options:  
Edit Details: Allows you to edit the highlighted Wi-Fi network's parameters. Note  
that this option is not available for your T-Mobile-designated Wi-Fi network  
profiles.  
Connect: Connects your phone to the currently highlighted network. This option  
will not be available if your phone is currently connected to a Wi-Fi network.  
Alternatively, you can connect to a network on the Saved Networks list.  
Delete: Deletes the selected network from the Saved Networks list. Note that this  
option is not available for your T-Mobile-designated Wi-Fi network profiles.  
Forward Settings: Sends the highlighted network's settings to another user. Note  
that this option is not available for your T-Mobile designated Wi-Fi network  
profiles.  
Change Priority: Lets you change the order of the Wi-Fi networks to which your  
phone attempts to connect. Connections to networks with a higher priority are  
tried first.  
Add new: Adds a new network to your Saved Networks list. This option also allows  
you to manually add settings for the new network. The submenu items for the Add  
New menu are as follows:  
- From Available Networks: Allows you to add a new network from the list of  
Available Networks.  
- Create Manually: Allows you to manually enter the new network's settings. You’ll  
need the following information: Wi-Fi name, SSID, and Security (encryption) Type  
used.  
31  
Connecting to Wi-Fi Networks  
Quick Connect  
Select the Quick Connect option from the Wi-Fi menu to scan for any available  
preferred or open Wi-Fi network and connect to the network with the best signal  
strength. This feature allows you to make a quick Wi-Fi connection in instances  
where you know you are within range of an open Wi-Fi network.  
Note: Quick Connect will not attempt to connect to closed or secured wireless networks that are not part of  
the Saved Networks List.  
Use Quick Connect  
From the Idle screen, press and hold the  
to the strongest Wi-Fi network within range.  
key. Your phone connects  
Use the following steps for another method to access the Quick Connect option:  
1. From the Idle screen, press the Menu soft key to access Menu mode and  
proceed through the following steps:  
2. Using the Navigation keys, scroll to Settings. Press the Select soft key to  
enter the menu.  
3. Highlight the Wi-Fi option and press the Select soft key or the  
key.  
4. Highlight the Quick Connect option and press the Select soft key or the  
key.  
5. Your phone connects to the strongest Wi-Fi network available.  
Note: If the Quick Connect option is selected when your phone is in Sleep mode (Wi-Fi OFF), the phone  
automatically switches to Active Mode (Wi-Fi ON) before attempting to make the connection.  
Wi-Fi 32  
 
Turn Wi-Fi On/Off  
Select the Turn Wi-Fi ON/OFF option from the Wi-Fi menu to activate/deactivate the  
Wi-Fi feature. Your phone's default state is Wi-Fi On (Active Mode). Wi-Fi should be  
left on to take advantage of the seamless transfer between regular cellular networks.  
Wi-Fi is On  
Wi-Fi is Off  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to Settings. Press the Select soft key to  
enter the menu.  
3. Highlight the Wi-Fi option and press the Select soft key.  
4. Highlight the Turn Wi-Fi ON/OFF option and press the Select soft key.  
Note: If the Quick Connect option is selected when your phone is in Sleep mode (Wi-Fi OFF), the phone  
automatically switches to Active mode (Wi-Fi ON) before attempting to make the connection.  
Get Security Key  
Get Security Key option can only be used with a T-Mobile wireless router. Select the  
Get Security Key option from the Wi-Fi menu to acquire the security key for a  
T-Mobile Wi-Fi compatible phone from a T-Mobile wireless router. This feature is  
about exchanging security information between a T-Mobile router and a T-Mobile  
Wi-Fi phone.  
When used with an open network, the Get Security Key process creates a WPA key  
on the router. This key is automatically transferred to the phone. Manually configure  
all laptops and devices connected wirelessly for the new security. When used on an  
already secured network, the key configured on the router is transferred to the  
phone. For the duration of the process (for example, while the  
on the router is  
blinking), all laptops and devices using the wireless network lose their connection.  
33  
   
Use Get Security Key  
For T-Mobile routers without encryption enabled, following this sequence turns on  
WPA and sends the security key to your T-Mobile phone. If encryption is enabled, the  
light is constantly lit on the T-Mobile router, and the current router settings are sent  
to the phone.  
Note: If you change the router settings, you can edit the phone's profile with the new setting or you can  
create a new phone profile.  
Get Security Key option can only be used with a T-Mobile wireless router. Select the  
Get Security Key option from the Wi-Fi menu to acquire automatic security keys for  
a T-Mobile Wi-Fi compatible phone from a T-Mobile wireless router.  
Use Get Security Key  
1. From the Idle screen, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to Settings. Press the Select soft key to  
enter the menu.  
3. Highlight the Wi-Fi option and press the Select soft key or the  
4. Highlight the Get Security Key option and press the Select soft key or  
the key.  
key.  
5. Follow the on-screen prompts to step through the process of acquiring  
security keys.  
This process involves pressing the secure button on the front of the router. You can  
identify the secure button by the  
on, or adjacent to the button. The key /  
passphrase is stored with the profile on your Saved Networks list. The phone tries to  
connect to a network after successfully securing the key.  
Wi-Fi 34  
 
You can also enter a security key manually in the phone. If connecting via available  
networks, the phone prompts you to enter the key for WEP or passphrase for WPA.  
You can also follow the steps for manually adding a network seen in a subsequent  
section of the manual. When entering a security key, if numbers are part of the key,  
press and hold the desired key to quickly access the number, this bypasses the  
multi-tap text entry mode.  
In order to view the security key, you may need to log into your wireless router's  
administrative site. If you printed or saved your settings when setting up your router,  
you may reference this as well.  
Add New Network  
By adding a network to your phone, you can automatically connect to the network  
when you are in range. If it requires a security key or passphrase, you can enter the  
key and the phone stores the key or passphrase with the profile.  
You can add a new network using one of the following methods:  
When connecting to a network from Available Networks, select to save when  
prompted  
Select Add New Network > From Available Networks  
Select Add New Network > Create Manually  
35  
   
Add From Available Network Option  
Add From Available Network Option  
To add a new network to your Saved Networks list from your list of available  
networks:  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to Settings. Press the Select soft key to  
enter the menu.  
3. Highlight the Wi-Fi option and press the Select soft key or the  
4. Highlight the Add New Network option and press the Select soft key or  
the key.  
key.  
5. Highlight the From Available Networks option and press the Select soft  
key. The phone searches for available networks and displays a list of  
networks in signal-strength order.  
6. Highlight the network you want and press the Save soft key. To give the  
network a new name before saving it, use the Cancel  
key to delete  
the name and then type a new network name.  
7. Press the  
key to save the new network.  
Add Manually  
To manually add a new network to your Saved Networks list:  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to Settings. Press the Select soft key to  
enter the menu.  
3. Highlight the Wi-Fi option and press the Select soft key.  
4. Highlight the Add New Network option and press the Select soft key.  
5. Highlight the Create Manually option and press the Select soft key.  
6. Type your desired profile name for the network.  
7. Press the Down key to highlight the SSID option. Enter the new network's  
SSID: option.  
The SSID (Service Set Identifier), is the actual name of the wireless  
network, not the profile name you entered. The profile name is simply a  
name to help you keep track of which network is which. The SSID is a key  
piece of information needed to locate and connect to a wireless network.  
Wi-Fi 36  
   
8. Press the Down key to highlight the Security Type option. Press the Left  
or Right key to set to KEY NONE, WEP 64 bit, WEP 128 bit, WPA-PSK, or  
WPA2-PSK. The Key field only becomes active if you choose an option  
other than None.  
Note: The Security Type refers to the particular security protocol being used for a specific wireless network.  
WPA is the current security standard for wireless networks and is recommended by T-Mobile. WEP is  
an older, and less robust security standard, but it provides wider compatibility.  
9. Press the Down key to highlight the Key: option. For information on the key  
10. Press the Down key to highlight Connection Settings. Press the Left or  
Right key to set to Automatically Connect, or Don’t automatically  
connect.  
11. Press the Down key to highlight the Non-Broadcast SSID option. Press  
the  
key to place a checkmark in this box if your router does NOT  
broadcast its SSID. In general, the default setting for most routers will  
broadcast the SSID.  
12. Press the Down key to highlight the Inter AP handovers option.  
13. Press the  
key to place a checkmark in this box if you want your phone  
to perform a fast handoff (for quicker authentication).  
14. Press the Down key to highlight the IP setting option. Press the Left or  
Right key to set to Dynamic or Static. Dynamic is the standard and  
recommended setting.  
If you select Static in this step, press the Down key to highlight the IP  
address option. Press the  
key to enter the IP address menu. If you are  
using a T-Mobile Router, copy the information regarding the Subnet Mask,  
DNS Server, and Gateway from your router into your phone. The IP address  
you input must be different from the one you use to access the router. If  
you are connected to a Wi-Fi network that requires Static IP addresses  
(usually in a corporate environment), please see your System Administrator  
to get the required information.  
15. When finished, press the Save soft key.  
37  
Troubleshooting  
Troubleshooting  
This section provides resources for determining solutions to problems or issues that  
may occur with your T-Mobile Wi-Fi compatible phone.  
T-Mobile Wi-Fi Help  
Use the following steps to select the Wi-Fi Help option from the Wi-Fi menu and get  
specific Wi-Fi assistance.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to Settings. Press the Select soft key to  
enter the menu.  
3. Highlight the Wi-Fi option and press the Select soft key.  
4. Highlight the Wi-Fi Help option and press the Select soft key.  
Wi-Fi 38  
     
Section 4: Call Functions  
Topics Covered  
This section describes how to make or answer a call. It also explains the features and  
functionality associated with making or answering a call. For more information on  
Ringtonessee "Ringtone" on page 101. For moreinformationonCall Forwardingsee  
Making a Call  
When the idle screen displays, enter the number you wish to dial and press the  
key.  
Note: When you activate the Auto redial option in the Extra settings menu, the phone automatically  
redials up to 10 times when the person does not answer the call or is already on the phone, provided  
Making an International Call  
Note: Contact your service provider to determine if this service is activated.  
1. Press and hold the  
2. Enter the country code, area code, and phone number.  
3. Press the key to make the call.  
key. The + character displays.  
39  
         
Making a Call  
Correcting the Number  
1. To clear the last digit displayed, press the  
key.  
2. To clear any other digit in the number, press the Left or Right Navigation  
key until the cursor is immediately to the right of the digit to be cleared and  
then press the  
3. To clear the whole display, press and hold the  
Ending a Call  
When you want to finish your call, briefly press the  
Redialing the Last Number  
key. You can also enter a missing digit.  
key.  
key.  
The phone stores the numbers of the calls you’ve dialed, received, or missed if the  
caller is identified.  
To recall any of these numbers:  
1. Press the  
key to return to Idle mode (if you typed characters on  
the display).  
2. Press the  
key to display a list of the most recent numbers used in the  
order you dialed or received them.  
3. Use the Up and Down Navigation keys to scroll through the numbers and  
highlight the number you want.  
4. To view details of the number, such as Caller ID and call logs, press  
the  
key.  
Before you dial the number, press the Options soft key to display the  
following options:  
Call back: Places a call back to the number.  
Send message: Allows you to send a Text message, Picture message, or  
Voice note to the number.  
Save to Phonebook: Stores the number in your Phone memory, onto your  
SIM card, or your SIM card(FDN).  
Delete: Allows you to delete the Selected number or All call records.  
Add to block list: Allows you to block the selected number from being received  
as an incoming call.  
5. To dial the number, press the  
key.  
Call Functions 40  
     
Making a Call from the Phonebook  
You can store regularly used phone numbers into the phone’s memory or onto your  
SIM card. These entries are collectively called the Phonebook.  
Once you store a number in the Phonebook, you can press only a few key to dial the  
stored number. By using the Speed Dial feature you can also assign your most  
frequently-used numbers to number keys.  
Adjusting the Call Volume  
During a call, use the Volume keys on the left side of the phone, to adjust the  
speaker volume.  
Press the  
the speaker volume level.  
In Idle mode, you can also adjust the ring volume using these keys.  
key to increase the volume level and the  
key to decrease  
These keys can also be used to scroll up or down a listing of items such as a  
menu list, contacts list, etc.  
Answering a Call  
When somebody calls you, the phone rings and displays the incoming call image.  
The caller’s phone number, or name if stored in Phonebook, is displayed.  
1. Press the  
If the Anykey answer option in the Extra Settings menu is activated, you  
can press any key to answer a call except for the key.  
key or the Accept soft key to answer the incoming call.  
Note: To reject an incoming call, press the Reject soft key or  
key.  
2. Press the  
key to end the call.  
Note: You can answer a call while using the Phonebook or menu features. After ending the call, the phone  
returns to the function screen you were previously using.  
Call Records  
All incoming, outgoing and missed calls are listed in the Call Records. You can also  
view Call time records.  
1. In Idle mode, press the Menu soft key to access the Menu mode.  
2. Using the Navigation keys, scroll to the Call records icon and press the  
Select soft key or the  
key to enter the menu.  
41  
               
Call Records  
key to access your call records (All calls, Missed calls,  
Note: While in Idle mode, press the  
Incoming calls, and Outgoing calls).  
The following Call Record options are available:  
All calls  
This menu lets you view the 90 most recent calls you received, dialed, and missed.  
The name or number, if already stored in your Phonebook, displays with the number  
of occurrences for each number.  
Note: At any time while you are in Call Records, you may use the Left or Right Navigation keys to scroll  
between All calls, Missed calls, Incoming calls, and Outgoing calls.  
Missed calls  
This menu lets you view the 30 most recent calls you received, but did not answer.  
The name and number, if already stored in your Phonebook, displays with the  
number of occurrences for each number.  
Viewing Missed Calls  
When you are unable to answer a call for any reason, you can find out who is calling  
you, if this service is available, so that you can call the person back.  
The number of calls you missed displays on the idle screen immediately after a call  
is missed.  
To view a missed call immediately:  
1. If the display is off, press the volume key to turn the display on. The Missed  
call tab appears on the display.  
2. Press the View soft key.  
The number corresponding to the most recently missed call is displayed first (top of  
list).  
3. To scroll through these missed calls, press the Up or Down Navigation key.  
4. To call a particular number, highlight the entry and press the  
key.  
- Or -  
Highlight a number from the list and press the Options soft key for the  
following options:  
Details: Displays details of the missed call including name, number, dates and  
times of the calls.  
Call back: Places a call back to the number.  
Call Functions 42  
     
Send message: Allows you to send a Text message, Picture message, or Voice  
note back to the missed number.  
Save to Phonebook: Stores the number in your Phone memory onto your SIM  
card, or your SIM card(FDN).  
Delete: Allows you to delete the selected number or delete all call records.  
Add to block list: Allows you to block the selected number from being received  
as an incoming call.  
Note: You can press the  
key at any time to exit the Missed Call feature.  
Incoming calls  
This menu lets you view the 30 most recent calls you received.  
The name and number, if already stored in your Phonebook, is then displayed with  
the number of occurrences for each number.  
Outgoing calls  
This menu lets you view the 30 most recent calls you dialed.  
The name and number, if already stored in your Phonebook, is then displayed with  
the number of occurrences for each number.  
Delete all  
This menu allows you to delete all of the records in each call type separately, or you  
can delete all of your call types at one time.  
1. Highlight the type of calls you want to delete (All calls, Missed calls,  
Incoming calls, or Outgoing calls) and press the  
mark adjacent to an category entry.  
key to place a check  
Note: Selecting the All calls check box automatically selects all the entries in the Delete all menu.  
2. Press the Delete soft key to delete the calls.  
3. When a confirmation message displays, press the Yes soft key or  
key  
to confirm.  
43  
     
Silent Mode  
Call time  
This menu lets you view the time log for calls both made and received.  
Note: The actual time invoiced by T-Mobile may differ from times displayed due to network features and  
service plan.  
The following time logs are available:  
Last call time: shows the length of your last call.  
Total outgoing: shows the total length of all calls made since the timer was  
last reset.  
Total incoming: shows the total length of all calls received since the timer was  
last reset.  
Life time is: shows the total length of time for both incoming and outgoing calls.  
The length of call time must be at least 1 minute to increment this field. You  
cannot clear this information.  
Silent Mode  
Silent Mode is convenient when you wish to stop the phone from making any noise,  
(in a theater for example).  
In Idle mode, press and hold the  
key until the “Silent Mode On” message and  
the Silent Mode icon (  
vibrates.  
) display. In Silent Mode, instead of sounds, your phone  
To exit and reactivate the previous sound settings, press and hold the  
again until the “Exit Silent Mode” message displays. The Silent Mode icon (  
no longer displayed.  
key  
) is  
Selecting Functions and Options  
Your phone offers a set of customizable functions. These functions are arranged in  
menus and sub-menus, and accessed using the two soft keys. Each menu and  
submenu allows you to view and alter the settings of a particular function.  
Call Functions 44  
         
Soft Keys  
The roles of the soft keys vary depending on the function you are currently using.  
The labels on the bottom line of the display just above each key indicate their current  
role.  
Selecting Options  
To view the various functions and options available, you must select the one you  
want by:  
1. Press the appropriate soft key.  
2. To select the function displayed or the option highlighted, press the Select  
soft key or the  
key.  
3. To view the next function or highlight the next option on a list, press the  
Down Navigation key.  
4. To move back to the previous function or option on a list, press the Up key.  
5. To move back up one level in the menu structure, press the Back soft key.  
6. To exit the menu structure without changing the settings, press the  
key.  
In some functions, you are asked for a password or PIN. Enter the correct code and  
press the OK soft key or the  
key.  
When you access a list of options, your phone highlights the currently active option.  
If, however, there are only two options, such as On/Off or Enable/Disable, your  
phone highlights the option that is not currently active, so that you can select it.  
45  
 
Selecting Functions and Options  
Options During a Call  
Your phone provides a number of control functions that are available for use during a  
call.  
Switching off the Microphone (Mute)  
You can temporarily switch your phone’s microphone off, so that the other person  
cannot hear you.  
Example: You wish to say something to a person in the room but do not want the person on the phone to  
hear you.  
To switch the microphone off temporarily:  
1. Press the Options soft key.  
2. Select the Mute option and press the Select soft key or the  
key. The  
other person can no longer hear you. The Mute icon (  
displayed at the bottom left of the screen.  
) is then  
To switch the microphone back on:  
Press the Options soft key. Select the Unmute option and press the Select  
soft key or the key. The other person can hear you again. The  
icon is then displayed at the bottom left of the screen.  
Putting a Call on Hold  
You can place the current call on hold whenever you want. If your network supports  
this service, you can also make another call while a call is in progress.  
To place a call on hold:  
1. Press the Options soft key, highlight the Hold option, then press the Select  
soft key or the  
key.  
2. Press the Resume soft key to reactivate the call.  
To make a new call while a call is in progress:  
1. Enter the new phone number that you wish to dial or look it up in the  
Contact list.  
2. Press the  
key to dial the second call.  
The first call is then automatically put on hold.  
- Or -  
Call Functions 46  
       
1. Press the Options soft key, select Hold, and press the  
key. This  
places the currently active call on hold and allows you to make a new call.  
2. Make the second call in the normal way.  
When there is an active call and a call on hold, you may switch between the two  
calls by placing the current held call to active and then placing the other call on hold.  
To switch between the two calls:  
1. Press the Options soft key, select Swap, and press the  
key. The  
current active call is placed on hold and the call on hold is then reactivated  
so that you can continue conversing with that person.  
2. Press the  
key when you are finished or want to end the call.  
Using the Speakerphone  
While on a call, you can use your Speakerphone by following these steps:  
1. Press the Spkr on soft key.  
2. To turn the Speakerphone off, press the Spkr off soft key.  
Muting or Sending Key Tones  
These options allow you to turn the key tones off or on. If the Keypad tone option is  
Off, your phone does not transmit the DTMF (Dual Tone Multi-Frequency) tones of the  
keys, which then allows you to press keys without hearing annoying key tones  
during a call.  
Note: To communicate with answering machines or computerized telephone systems, the Send DTMF  
option must be selected.  
Searching for a Number in Phonebook  
You can search for a number in Phonebook during a call.  
1. Press the Options soft key.  
2. Press the Down Navigation key to highlight Phonebook and press the  
key.  
3. Press the Down Navigation key to highlight the Contact list option and  
press the Select soft key or the  
key.  
47  
     
Selecting Functions and Options  
With the Phonebook entries then listed:  
4. Enter the name that you wish to find in the textbox located above the  
entries. If you enter the first few letters of the name, the Phonebook entries  
are listed starting with the first entry matching your input.  
- Or -  
Use the Up or Down Navigation key to highlight the contact that you  
desire.  
5. To view the highlighted entry, press the Options soft key.  
6. Highlight the View option and press the Select soft key or the  
key. The Contact information displays.  
For further details about the Phonebook feature, see "Finding a Phonebook Entry"  
Call Waiting  
The Call waiting option must be set to Activate before you can answer an incoming  
You are then notified of an incoming call with a call waiting tone.  
To answer a new call while another call is in progress:  
1. Press either the Accept soft key or the  
key to answer the incoming  
call. The first call is automatically put on hold.  
2. To switch between the two calls, press the Options soft key, highlight  
Swap and press the Select soft key or the key.  
3. To end a call on hold, press the Options soft key and select the End held  
call option. Then press the Select soft key or the  
4. To end the current/remaining call, press the  
Making a Multi-Party Call  
key.  
key.  
A multi-party call is a network service that allows up to six people to take part  
simultaneously in a multi-party or conference call.  
For further details about subscribing to this service, contact T-Mobile customer  
service.  
Call Functions 48  
   
Setting up a Multi-Party Call  
1. Call the first participant in the normal way.  
2. Press the Options soft key and select the New call option.  
3. Call the second participant in the normal way. The first call is automatically  
placed on hold.  
4. To join the first participant to this multi-party call, press the Options soft  
key and select Join. Press the Select soft key or the  
key.  
Note: These first two calls are then grouped together on screen and displayed with an adjacent number  
corresponding to the order in which the calls were made.  
5. Press the Options soft key and then select the New call option to add a  
new person to a second multi-party call group.  
6. Press the Options soft key or the  
key. Select the Join option and  
key.  
press the Select soft key or the  
Note: There are a maximum of two callers that can be joined to a single multi-party line. Additional callers  
would participate in a new Multiparty session which can be held in conjunction with the previous  
multiparty call. Each of these multi-party calls can then be placed on hold or swapped.  
Having a Private Conversation With One Participant  
When there are two participants in a multi-party session, it might be necessary to  
place one of those participants on hold so that a private conversation can be held  
with a single caller. While you are in a multi-party call:  
1. Press the Options soft key and choose the Split option. Press the Select  
soft key or the  
key.  
The short list of call participants then displays with the first caller selected.  
2. Press the Up or Down Navigation key to highlight the person with which  
you want to talk privately, and press the Select soft key or the  
key.  
Note: You can now talk privately to that person while the other participants can continue to converse with  
each other. If there is only one other participant, that person is then placed on hold.  
3. To return to the multi-party call, press the Options soft key and select  
Join. Press the Select soft key or the  
key. All of the multi-party call  
participants can now hear each other again.  
49  
   
Selecting Functions and Options  
Dropping One Participant  
1. Highlight the number you want to drop, press the Options soft key and  
select End held call.  
This option allows you to continue talking to the other participants.  
2. Press the  
key to end the multi-party call.  
Call Functions 50  
 
Section 5: Menu Navigation  
Topics Covered  
This section explains the menu navigation for your phone. It also includes an outline  
of all the available menus associated with your phone.  
Menu Navigation  
You can tailor the phone’s range of functions to your needs using menus and  
sub-menus. Menus and sub-menus can be accessed by scrolling using the  
Navigation keys or by using the shortcuts.  
Accessing a Menu Function by Scrolling  
1. In Idle mode, press the Menu soft key to access the Menu mode.  
2. Scroll using the Navigation keys to reach a main menu  
(for example: Settings). Press the Select soft key or the  
key to enter  
the menu.  
3. If the menu contains sub-menus, (for example, Security), after  
highlighting the sub menu, press the Select soft key or the  
access it.  
key to  
If the menu you selected contains further options, repeat this step.  
4. To scroll through the menus, press the Up or Down Navigation keys.  
5. To confirm the chosen setting, press the Select soft key, or the  
key.  
6. To return to the previous menu level, press the Back soft key, or the  
key.  
7. To exit the menu without changing the settings, press the  
key.  
51  
       
Menu Outline  
Using Shortcuts  
The menu items, such as menus, sub-menus, and options, are numbered and can  
be accessed quickly by using their shortcut numbers. For the main menus, press the  
corresponding number keys (1 to 0) to access any one of the shortcuts.  
Example: Accessing the Security menu.  
1. Press the Menu soft key.  
2. Press the  
key for Settings.  
3. Press the  
key for Security.  
Menu Outline  
The following list shows the menu structure and indicates the number assigned to  
each option.  
Important!: This menu navigation tree does NOT include or list UMA features.  
1: Voice note  
2: Call records  
2.1: All calls  
2.2: Missed calls  
2.3: Incoming calls  
2.4: Outgoing calls  
2.5: Delete all  
2.6: Call time  
3: t-zones  
3.1: Home  
3.2: Enter URL  
3.2.1: Open  
3.2.2: Select language  
3.2.3: Cancel  
3.3: Bookmarks  
3.4: Clear cache  
Menu Navigation 52  
     
4: IM  
4.1: AIM  
4.1.1: Sign On  
4.1.2: Saved conversations  
4.1.3: Offline conversations  
4.1.4: Preferences  
4.1.4.1: Favorite IDs  
4.1.4.2: Power on Sign On  
4.1.4.3: Community settings  
4.1.5: Help  
4.2: ICQ  
4.2.1: Connect  
4.2.2: Saved conversations  
4.2.3: Offline conversations  
4.2.4: Preferences  
4.2.4.1: Favorite IDs  
4.2.4.2: Power on connect  
4.2.4.3: Community settings  
4.2.5: Help  
4.3: Windows Live  
4.3.1: Sign In  
4.3.2: Saved conversations  
4.3.3: Preferences  
4.3.3.1: Favorite IDs  
4.3.3.2: Power on sign in  
4.3.3.3: Community settings  
4.3.4: Help  
4.4: Yahoo!  
4.4.1: Sign in  
4.4.2: Saved conversations  
4.4.3: Preferences  
4.4.3.1: Favorite IDs  
4.4.3.2: Power on sign in  
4.4.3.3: Community settings  
4.4.4: Help  
53  
Menu Outline  
5: Messages  
5.1: Create new  
5.1.1: Text message  
5.1.2: Picture message  
5.1.3: Voice note  
5.2: Inbox  
5.3: Outbox  
5.4: Drafts  
5.5: Templates  
5.5.1: Text templates  
5.5.2: Picture message templates  
5.6: Voice mail  
5.6.1: Call voice mail  
5.6.2: Voice server number  
5.6.2.1: Voice Mail  
5.7: Delete all  
5.8: Settings  
5.8.1: Text message  
5.8.2: Picture message  
5.8.2.1: Send settings  
5.8.2.2: Receive settings  
5.9: Memory status  
5.0: Broadcast messages**  
6: Fun & Apps  
6.1: Files  
6.1.1: Sounds  
6.1.1.1: Browse MegaTones  
6.1.1.2: Browse HiFi Ringers  
6.1.1.3: Sounds  
6.1.1.4: Voice list  
6.1.2: Images  
6.1.2.1: Browse Wallpapers  
6.1.2.2: Photos  
6.1.2.3: My Album  
Menu Navigation 54  
6.1.2.4: My Journal  
6.1.2.5: Downloaded images  
6.1.3: Videos  
6.1.3.1: Downloaded videos  
6.1.3.2: Videos  
6.1.4: Music  
6.1.5: Other files  
6.1.6: Memory status  
6.2: Games  
6.3: Music player  
6.4: Camera  
6.4.1: Take and Send  
6.4.2: Record video  
6.4.3: Photos  
6.4.4: Videos  
6.4.5: My Album  
6.4.6: My Journal  
6.5: Voice recognition  
6.5.1: Choice lists  
6.5.2: Sensitivity  
6.5.3: Digit dialing  
6.5.4: Sound  
6.5.5: About  
6.6: Organizer  
6.6.1: Alarm  
6.6.2: Calendar  
6.6.2.1: Month view  
6.6.2.2: Week view  
6.6.2.3: Day view  
6.6.2.4: Schedule  
6.6.2.5: Anniversary  
6.6.2.6: Miscellaneous  
6.6.2.7: Missed alarm events  
6.6.2.8: Memory status  
6.6.3: Tasks  
55  
Menu Outline  
6.6.4: Notes  
6.6.4.1: Create  
6.6.5: Calculator  
6.6.6: Tip calculator  
6.6.7: World Time  
6.6.7.1: Save  
6.6.7.2: Apply daylight saving time  
6.6.8: Synchronization  
6.6.9: Unit conversion  
6.6.9.1: Currency  
6.6.9.2: Length  
6.6.9.3: Weight  
6.6.9.4: Volume  
6.6.9.5: Area  
6.6.9.6: Temperature  
6.6.0: Timer  
6.6.*: Stopwatch  
6.7: Image editor  
6.7.1: New image  
7: Help  
8: Phonebook  
8.1: Add new contact  
8.2: Contact list  
8.3: Groups  
8.4: Speed dial  
8.5: Block list  
8.5.1: Add new  
8.5.2: Remove  
8.6: Management  
8.6.1: View contacts  
8.6.2: Default saving  
8.6.3: Copy all to  
8.6.4: Sort by contacts  
Menu Navigation 56  
8.6.5: Delete all  
8.6.6: Memory status  
8.7: Own number  
8.8: FDN list  
8.8.1: Add  
9: Settings  
9.1: Wi-Fi  
9.1.1: Available Networks  
9.1.2: Saved Networks  
9.1.2.1: HotSpot  
9.1.2.2: @Home  
9.1.3: Quick Connect  
9.1.4: Turn Wi-Fi OFF  
9.1.5: Get Security Key  
9.1.6: Add New Network  
9.1.6.1: From Available Networks  
9.1.6.2: Create Manually  
9.1.7: Wi-Fi Help  
9.2: Time & date  
9.3: Phone settings  
9.3.1: Language  
9.3.2: Greeting message  
9.3.3: Slide settings  
9.3.4: USB settings  
9.3.5: Extra settings  
9.3.6: Airplane mode  
9.4: Display settings  
9.4.1: Wallpaper  
9.4.2: Info display  
9.4.3: Skin  
9.4.4: Brightness  
9.4.5: Backlight  
57  
Menu Outline  
9.4.6: Dialing display  
9.4.6.1: Font size  
9.4.6.2: Font color  
9.4.6.3: Background color  
9.4.7: Calendar  
9.4.8: Show caller information  
9.5: Bluetooth  
9.5.1: Turn Bluetooth On  
9.5.2: My devices  
9.5.3: Bluetooth services  
9.5.3.1: Headset  
9.5.3.2: Handsfree  
9.5.4: Help  
9.6: Sound settings  
9.6.1: Incoming call  
9.6.2: Keypad tone  
9.6.3: Msesage tone  
9.6.4: Power on/off tone  
9.6.5: Slide tone  
9.6.6: Silent mode  
9.6.7: Extra tones  
9.7: Synchronization  
9.8: Network services  
9.8.1: Call forwarding  
9.8.1.1: Forward always  
9.8.1.2: Busy  
9.8.1.3: No reply  
9.8.1.4: Unreachable  
9.8.1.5: Cancel all  
9.8.2: Call barring**  
9.8.3: Call waiting  
9.8.3.1: Voice calls  
9.8.3.2: Data calls  
9.8.3.3: Cancel all  
Menu Navigation 58  
9.8.4: Network selection  
9.8.4.1: Search now  
9.8.4.2: Default setup  
9.8.5: Caller ID  
9.9: Security  
9.9.1: PIN check  
9.9.2: Change PIN  
9.9.3: Phone lock  
9.9.4: Change password  
9.9.5: Lock application  
9.9.6: FDN mode  
9.9.7: Change PIN2  
9.0: Software update  
9.*: Memory status  
9.*.1: Shared memory  
9.*.2: Messages  
9.*.3: Files  
9.*.4: Calendar  
9.*.5: Phonebook  
9.*.6: Notes  
9.#: Reset settings  
** Displays only if supported by your SIM card.  
59  
Changing the Text Input Mode  
Section 6: Entering Text  
Topics Covered  
Using ABC Mode  
This section outlines how to select the desired text input mode when entering  
characters into your phone. This section also describes how to use the T9 predictive  
text system to reduce the number of key strokes associated with entering text.  
Changing the Text Input Mode  
When using your phone, you often need to enter text, such as when storing a name  
in your Phonebook, creating your personal greeting or scheduling events on your  
calendar. You can enter alphanumeric characters by using your phone’s keypad.  
Your phone has the following text input modes:  
T9 mode: this mode allows you to enter words with only one keystroke per letter.  
Each key on the keypad has more than one letter; for example, you press  
enter J, K, or L. However, the T9 mode automatically compares the series of  
keystrokes you make with an internal linguistic dictionary to determine the most  
likely word, thus requiring fewer keystrokes than the traditional ABC mode.  
ABC mode: this mode allows you to enter letters by pressing the key labeled with  
the corresponding letter.  
to  
Number mode: this mode allows you to enter numbers.  
Symbol mode: this mode allows you to enter symbols, such as punctuation  
marks.  
When you are in a field where you can enter characters, the text input mode  
indicator displays at the bottom right of the screen.  
Example: Writing a text message.  
Entering Text 60  
                 
New message  
Abc  
Message text  
160  
1/12  
Send  
Text Input Mode Indicators  
Eng  
Options  
1. Press the Right soft key ( ) to change the text input mode.  
Note: Each time you press the Right soft key, a different Text input mode indicator displays in the lower  
right corner of your display.  
The following options are available:  
Eng  
: T9 mode  
A
Eng  
: ABC mode  
1
Eng  
: Number mode  
Symbol mode (No symbol displayed)  
2. Enter text in the text message box using the selected text input mode when  
the Text input mode indicator that you desire displays.  
Using T9 Mode  
T9 is a predictive text input mode that allows you to key in any character using  
single keystrokes. This text input mode is based on a built-in dictionary.  
To enter a word in T9 mode:  
1. When you are in T9 mode, press the 2 to 9 keys to enter a word. Press  
each key only once for each letter.  
Example: To enter “Hello” in T9 mode, press the 4, 3, 5, 5, and 6 keys.  
61  
   
Using T9 Mode  
The word that you type displays on the screen. The word may change with  
each consecutive key that you press.  
2. Enter the whole word before editing or deleting the keystrokes.  
3. When the word correctly displays, go to step 4.  
If the word doesn’t display correctly, press the  
key to display  
alternative word choices for the keys that you pressed.  
Example: Both the words “Of” and “Me” use the 6 and 3 keys. The phone displays the most commonly  
used choice first.  
4. Press the  
key to insert a space and begin entering the next word.  
To add a new word into the T9 dictionary:  
1. Press the keys that correspond to the word you want to add and press the  
key to display any alternative words.  
2. Press the  
displays on the bottom right portion of the screen.  
3. Press the Spell soft key or the key.  
key after the last alternative word displays. The word Spell  
4. Enter the word you want to add using ABC mode. For more information,  
5. Press the OK soft key or the  
key after you finish entering the new  
word.  
The word is added to the T9 dictionary and becomes a word for the  
associated keypress series.  
Note: This feature may not be available for some languages. The  
key has some emoticons  
associated with it. To enter other special characters within the T9 mode, press and hold the  
key to cycle through these characters.  
To enter periods, hyphens, apostrophes, and other special characters:  
Press the  
available characters.  
T9 mode applies grammar rules to ensure that correct punctuation is used.  
key and then press the  
key to cycle through these  
To shift case in T9 mode:  
Press the  
There are 3 cases: Initial capital, Capital lock, and Lower case.  
key  
Note: You can move the cursor by using the Navigation keys.  
Entering Text 62  
To delete characters:  
Press the  
Using ABC Mode  
key. Press and hold the  
key to clear the display.  
To use ABC mode, use the 2 to 9 keys to enter your text.  
1. Press the key labeled with the letter you want:  
Once for the first letter  
Twice for the second letter  
And so on  
2. Select the other letters in the same way.  
To enter periods, hyphens, apostrophes, and other special characters, press  
the key. ABC mode applies grammar rules to ensure that correct  
punctuation is used.  
To shift case in ABC mode, use the  
Capital lock, and Lower case.  
key. There are 3 cases: Initial capital,  
Note: You can move the cursor by using the Navigation keys.  
To delete letters:  
Press the  
key. Press and hold the  
key to clear the display.  
Note: The cursor moves to the right when you press a different key. When entering the same letter twice or  
a different letter on the same key, just wait for a few seconds for the cursor to automatically move to  
the right, and then select the next letter.  
Keys  
By default, the first letter of an entry is capitalized and all consecutive letters are  
kept in lowercase (unless the Shift key is used). After a character is entered, the  
cursor automatically advances to the next space after two seconds or when you  
enter a character on a different key.  
63  
   
Using Number Mode  
Characters scroll in the following order (lowercase characters shown in  
parentheses):  
. @ , - ? ! : ( ) / 1  
P Q R S 7 (p q r s 7)  
T U V 8 (t u v 8)  
A B C 2 (a b c 2)  
D E F 3 (d e f 3)  
G H I 4 (g h i 4)  
J K L 5 (j k l 5)  
W X Y Z 9 (w x y z 9)  
0 (Adds a space)  
Symbol - Press and hold to access  
Symbol grid (Spell Checker)  
M N O 6 (m n o 6)  
Shift (Toggles Lower/Uppercase)  
Using Number Mode  
The Number mode enables you to enter numbers into a text message.  
Press the keys corresponding to the digits you want to enter.  
Using Symbol Mode  
Symbol mode enables you to insert symbols and punctuation marks into text. To  
display a list of symbols press and hold the  
key.  
1. To select a symbol, press the corresponding number key.  
2. To display more symbols, press the Up or Down Navigation key.  
3. To clear the symbol(s), press the  
key. When the input field is empty,  
this key returns the display to the previous mode.  
4. To insert the symbol(s) into your message, press the OK soft key or the  
key.  
Entering Text 64  
       
Section 7: Understanding Your Phonebook  
Topics Covered  
This section explains how to use and manage your Phonebook. You can save phone  
numbers to your phone’s memory or to your SIM card.  
Using Contacts List  
The Contacts List displays all the phone numbers and contact information stored on  
both the phone’s memory and the SIM card. From this list you can manage your  
phonebook entries by adding a new contact, storing a number in the phone’s  
memory or on the SIM card, quickly locate and dial a contact phone number, edit a  
caller group, or delete all of the numbers stored on the phone or SIM.  
Note: When storing a Phonebook entry into your SIM card, note that only the Name, and Number are saved.  
To save additional information for a particular contact, such as notes, e-mail, dates, etc., it is  
important to save that Contact into your phone’s onboard memory.  
65  
       
Adding a New Contact  
Adding a New Contact  
Use the following procedures to store a new contact to your Phone or SIM Card.  
Storing a Number in the Phone’s Memory  
The default storage location for saving phone numbers to your phonebook is your  
phone’s built-in memory. You can also save your numbers to your SIM card or setup  
a default location so that whenever a new phonebook entry is created, you are  
prompted to choose between Phone or SIM card. For information on how to change  
Note: When you copy a phone number from your SIM card to your phone, the number displays twice in your  
Contact list and each displays an icon that represents the location.  
1. In Idle mode, press the Menu soft key to access the Menu mode.  
2. Using the Navigation keys, scroll to the Phonebook icon. Press the Select  
soft key or the  
3. Scroll to Add new contact by pressing the Up or Down Navigation key and  
press the Select soft key or the key.  
key to enter your Phonebook.  
4. Enter a first name in the First Name text box. Press the Down key to tab to  
the next text box.  
For further details about how to enter characters, see "Using ABC Mode"  
on page 63.  
5. Enter a last name in the Last Name text box. Press the Down key to tab to  
the next text box.  
6. Highlight a number Type by pressing the Up or Down Navigation key, then  
enter a number in the text box.  
The following types are available:  
Mobile: assigns the number entered to the Mobile entry.  
Home: assigns the number entered to the Home entry.  
Office: assigns the number entered to the Office entry.  
Fax: assigns the number entered to the Fax entry.  
Other: allows you to enter more detailed information for the entry.  
Email: allows you to enter the email address for the contact.  
Picture ID: allows you to add a Picture ID assigned to the contact.  
Ringtone: allows you to assign a Ringtone by choosing from one of the following  
locations: Default melodies, Voice list, Sounds, Music, or Do not assign (no  
ringtone assigned to entry).  
Understanding Your Phonebook 66  
       
Group: allows you to assign this contact to a group.  
Notes: allows you to enter additional information about the contact.  
Up to 50 characters.  
7. Press the Save soft key or press the Options soft key and highlight the  
Save option and press the Select soft key or the key. The number  
saves to your phone and the new contact information displays.  
8. To return to the Idle screen, press the  
key.  
Storing a Number in the SIM Card  
The default storage location for saving phone numbers to your phonebook is your  
phone’s built-in memory. To save a number to your SIM card, you need to change the  
Default Saving option first. For information on how to change this setting, see  
Note: When storing a Phonebook entry into your SIM card, note that only the Name, and Number are saved.  
To save additional information for a particular contact, such as notes, e-mail, dates, etc., it is  
important to save that Contact into your phone’s onboard memory.  
1. In Idle mode, press the Menu soft key to access the Menu mode.  
2. Using the Navigation keys, scroll to the Phonebook icon. Press the Select  
soft key or the  
3. Scroll to Management by pressing the Up or Down Navigation key and  
press the Select soft key or the key.  
key to enter your Phonebook.  
4. Highlight Default saving and press the Select soft key or the  
key.  
5. Highlight SIM card and press the Select soft key or the  
key.  
Note: You can also set the Default saving option to Ask on saving in the Management menu. With this  
option, you are prompted for a storage location each time you add a new contact. For more  
6. Press the Back soft key until you return to the main screen  
(Idle mode) or press the  
key.  
Now that your phone is set up to store contacts to your SIM card, follow this  
procedure to store a number.  
1. In Idle mode, press the Menu soft key to access the Menu mode.  
2. Using the Navigation keys, scroll to the Phonebook icon. Press the Select  
soft key or the  
key to enter your Phonebook.  
3. Highlight the Add new contact option and press the Select soft key or the  
key.  
67  
   
Dialing a Number from the SIM Card  
4. Enter a name for your contact into the Name field. A SIM card entry only  
has one available name field. Press the Down key to tab to the next text  
box.  
For further details about how to enter characters, see "Using ABC Mode"  
on page 63.  
5. Use the keypad to enter a number into the contact Phone Number field.  
Press the Save soft key or the  
key. The number saves in your SIM  
card. After storing, the phone displays the Phonebook entry you just  
created.  
6. To use the entry options after saving the number, highlight the Name field  
and press the Options soft key.  
The following options are available:  
Edit: allows you to edit the name and number fields in the entry.  
Send message: allows you to send a Text or Picture message, or send a Voice  
note to the recipient.  
Call: allows you to call the newly created recipient.  
Copy to phone: allows you to copy the selected contacts’ information from the  
SIM to the phone.  
Assign speed dial: allows you to assign the newly created SIM entry to a speed  
dial location.  
Send name card: allows you to send your name card as an attachment to a  
Text or Picture message.  
Delete: allows you to delete the name and number from the SIM card. You are  
asked to confirm the name and number deletion by pressing the Yes soft key. To  
cancel, press the No soft key.  
Add to block list: allows you to add the currently created contact entry to a list  
of blocked numbers. These numbers are rejected by the phone.  
7. Press the  
key to return to the Idle mode.  
Dialing a Number from the SIM Card  
1. In Idle mode, press and hold the keypad corresponding to the speed dial  
location number for the desired phone number you want to dial.  
2. If you don’t know the location number, press  
and the first  
location number is displayed.  
Press the Left or Right key to find other phone numbers stored in the SIM  
card’s list.  
3. Press either the Dial soft key, the  
key, or the  
key once you select  
the number you want to dial.  
Understanding Your Phonebook 68  
   
Finding a Phonebook Entry  
You can store phone numbers and their corresponding names onto either your SIM  
card or phone’s built-in memory. They are physically separate but are used as a  
single entity, called Phonebook.  
Depending on the storage size of the particular SIM card, the maximum number of  
phone numbers the card can store may differ.  
1. In Idle mode, press the Menu soft key to access the Menu mode.  
2. Using the Navigation keys, scroll to the Phonebook icon and press the  
Select soft key or the  
key to enter your Phonebook.  
3. Highlight Contact list and press the Select soft key or the  
key.  
Note: Any contacts that were stored on the SIM card are displayed with a SIM card icon (  
) to the left of  
)to the left of the  
the entry. Contacts that were stored on the phone display with a Phone icon (  
entry.  
4. Enter the first few letters of the name in the text box.  
The Phonebook entries are listed, starting with the first entry matching  
your input.  
5. If needed, press the Up or Down Navigation key until the entry you want is  
highlighted.  
6. Once you locate the entry, press the  
key to dial the number, or press  
the Options soft key to access the following Phonebook entry options:  
View: shows details of the Phonebook entry.  
Edit: allows you to edit the Name and number for the selected contact.  
Send message: allows you to send a message to the selected number. You  
may choose between Text message, Picture message, or Voice note.  
New contact: takes you to the Add new contact menu.  
Call: allows you to call the currently selected contact.  
Copy to: allows you to copy the selected content entry or all contact entries to  
the Phone, SIM or FDN list.  
Assign speed dial: allows you to assign a speed dial key number to the  
selected Phonebook entry.  
Send name card via: allows you to send your name card via Text message or  
Picture message.  
Delete: allows you to delete the selected name and number from your  
Phonebook or delete multiple numbers. You are asked to confirm your name and  
number deletion by pressing the Yes soft key. To cancel, press the No soft key.  
Select language: allows you to select between English, Français, and Español.  
69  
   
Dialing a Number from Phonebook  
7. Pressing the View option, from the above listing, displays the entry’s  
information.  
8. Press the Options soft key after the contact information is displayed, for  
these additional options:  
Edit: allows you to edit the name and number fields in the entry. You can also  
add an email address and notes.  
Send message: allows you to send a message to the selected number. You  
may choose between Text message, Picture message, or Voice note.  
Call: places the call to the selected phone number.  
Copy to phone/SIM card: allows you to copy the selected contacts’  
information to the Phone or SIM card.  
Assign speed dial: allows you to assign a speed dial key number to the  
selected Phonebook entry.  
Send name card via: allows you to send your name card via Text message or  
Picture message.  
Delete: allows you to delete the selected name and number from your  
Phonebook. You are then asked to confirm the name and number deletion by  
pressing the Yes soft key. Press the No soft key to cancel the deletion.  
Add to block list: allows you to add the currently created contact entry to a list  
of blocked numbers. These numbers are rejected by the phone.  
Dialing a Number from Phonebook  
Once you store phone numbers in the Phonebook, you can dial them easily and  
quickly by using the location numbers assigned to them and listed in the Phonebook.  
Note: If you cannot remember a location number, you must go into the Contact list menu in the  
Phonebook menu to search for the entry by name. For more information, refer to "Finding a  
Speed Dialing  
Once you store phone numbers from your Phonebook list, you can set up to 8 speed  
dial entries and then easily dial them whenever you want, by pressing the associated  
numeric key.  
In Idle mode, to speed dial the numbers assigned to keys (2 to 9), press  
and hold the appropriate key.  
Understanding Your Phonebook 70  
     
Setting Up Speed Dial Entries  
1. In Idle mode, press the Menu soft key to access the Menu mode.  
2. Using the Navigation keys, scroll to the Phonebook icon. Press the Select  
soft key or the  
3. Scroll to Speed dial by pressing the Up or Down Navigation key and press  
the Select soft key or the key.  
key to enter your Phonebook.  
4. Use the Up or Down Navigation key to select the keypad number key to  
where you wish to assign the new speed-dialing number and press the  
Add soft key or the  
key.  
Select from the 2 to 9 keys, and press the Add soft key.  
The 1 key is pre-reserved for quick dialing your voice mail.  
5. Highlight a contact entry number from the contact list and press the Select  
soft key or the key.  
6. Highlight the Select option and press the  
key.  
7. You receive a Saved confirmation and the Speed dial menu displays the  
number assigned to the number key you selected.  
8. To return to the Idle screen, press the  
key.  
Note: Memory location 1 is reserved for your Voice mail server number and this speed dial location can not  
be changed. The voice server number can be altered via the Messages > Voice mail > Voice  
server number menu.  
Editing a Caller Group  
1. In Idle mode, press the Menu soft key to access the Menu mode.  
2. Using the Navigation keys, scroll to the Phonebook icon. Press the Select  
soft key or the  
key to enter your Phonebook.  
3. Highlight the Groups option and press the Select soft key or the  
key.  
4. Scroll through the group list by pressing the Up or Down Navigation key.  
5. Highlight the group you want and press the Options soft key.  
6. Highlight the Edit option and press the Select soft key or the  
key.  
7. To edit the Caller group name, modify the text in the Name text box.  
8. To change the image associated with the Caller group, press the Down  
navigation key to highlight the Picture ID icon. Press the  
key.  
71  
   
Block List  
The following options are available:  
Take picture: allows you to take a picture with your camera.  
Photos: allows you to choose a photo from Photos folder.  
Downloaded images: allows you to choose a photo from your Downloaded  
images folder.  
Icons: allows you to choose from pre-defined icons.  
9. To change the ringtone associated with the Caller group, press the Down  
key to highlight the Ringtone icon. Press the  
key.  
The following options are available:  
Default melodies: allows you to choose between 11 different melodies.  
Voice list: allows you to assign a voice clip to this group.  
Sounds: allows you to choose a sound from your Sounds folder.  
Music: allows you to choose a music file from your Music folder.  
10. Press the Save soft key when you are finished. Your Caller group  
settings save.  
11. Press the  
key to return to Idle mode.  
Block List  
1. In Idle mode, press the Menu soft key to access the Menu mode.  
2. Using the Navigation keys, scroll to the Phonebook icon. Press the Select  
soft key or the  
3. Select the Block list option by pressing the Up or Down Navigation key  
and press the Select soft key or the key.  
key to enter your Phonebook.  
4. Press the Options soft key, press the Right Navigation key to go from the  
Add new option and select a block criteria from one the following  
categories:  
Number: blocks a specific number.  
Contacts: blocks selected contact entries.  
Group: block numbers associated with a specific caller Group  
FDN contacts: blocks selected FDN contact entries.  
Recent contacts: blocks selected numbers which are selected from the recent  
calls list.  
Unknown numbers: blocks incoming calls from unknown numbers.  
5. Press the Save soft key to add the selected number to your block list.  
Understanding Your Phonebook 72  
 
Deleting all of the Phonebook Entries  
You can delete all your entries from your phone’s memory, your SIM card, FDN, or All.  
Important!: Once Phonebook entries are deleted, they cannot be recovered.  
1. In Idle mode, press the Menu soft key to access the Menu mode.  
2. Using the Navigation keys, scroll to the Phonebook icon. Press the Select  
soft key or the  
3. Highlight Management and press the Select soft key or the  
4. Scroll to Delete all by pressing the Up or Down Navigation key and press  
the Select soft key or the key.  
key to enter your Phonebook.  
key.  
5. Press the OK key to place a check mark by the memory location you want  
to empty (All, Phone, SIM card, or SIM card(FDN)) and press the Delete soft  
key.  
Tip: Press the OK key to remove the check mark.  
6. When the Delete? confirmation message displays, press the Yes soft key  
or the  
key.  
7. Press the No soft key to cancel.  
8. Press the  
key to return to Idle mode.  
Management  
The Management menu allows you to select where your contacts are saved, copy  
your SIM contacts to your phone, delete your contacts, sort by contacts, or check  
your memory status.  
View Contacts  
This option allows you to view all the contacts stored on the Phone or the Phone and  
SIM.  
73  
   
Management  
Default Saving  
The Default Saving option allows you to choose where your contacts are saved. The  
following options are available:  
Phone: new phonebook contacts are saved to your phone. Your phone comes with  
the default set to Phone memory.  
SIM card: new phonebook contacts are saved to your SIM card.  
Ask on saving: you are prompted to choose between Phone or SIM Card  
whenever you save a new contact.  
Copy all to  
The Copy all to option allows you to copy all the contact information to your Phone  
or SIM card.  
Sort by contacts  
The Sort by contacts menu option allows you to set the sort function to alphabetize  
the contacts by First name or Last name.  
Delete All  
Important!: Once contact entries are deleted, they cannot be recovered.  
This option allows you to delete all your contacts from the Phonebook. For more  
Memory Status  
You can check how many names and numbers are stored in the Phonebook, within  
both the SIM card, Phone memory, and the FDN. You can also see the current  
storage capacity of both memories.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Scroll to the Phonebook icon using the Navigation keys. Press the Select  
soft key or the  
3. Highlight Management and press the Select soft key or the  
4. Select the Memory status option by pressing the Up or Down Navigation  
key and press the Select soft key or the key.  
key to enter your Phonebook.  
key.  
5. Press the  
key or the Back soft key when you are finished.  
Understanding Your Phonebook 74  
 
Own Number  
This function is a memory aid, which you can use to check your own phone number  
if you need to do so.  
You can assign a name to each of your own phone numbers registered on your SIM  
card. You can also edit the names and numbers. Any changes made here do not in  
any way affect the actual subscriber numbers on your SIM card.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Phonebook icon. Press the Select  
soft key or the  
3. Select the Own number option by pressing the Up or Down Navigation key  
and press the Select soft key or the key.  
key to enter your Phonebook.  
4. Highlight the Number 1 entry to reveal a drop down containing your  
current number.  
To edit your number information:  
1. Press the  
key. This makes the phone number field accessible.  
2. Highlight the Phone Number field and press the  
to backspace and  
erase the existing number.  
3. Enter the new number information and press the Save soft key.  
75  
   
FDN List  
FDN List  
FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict  
your outgoing calls to a limited set of phone numbers.  
The FDN List allows you to set up a list of numbers that your phone may dial.  
FDN mode must first be enabled in the Security settings. For more information on  
To enable FDN mode, a PIN2 number is required. You can obtain your PIN2 from  
T-Mobile customer service.  
Important!: Your Default saving location must be set to SIM prior to performing this procedure. For more  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Phonebook icon. Press the Select  
soft key or the  
3. Select the FDN list option by pressing the Up or Down Navigation key and  
press the Select soft key or the key.  
4. Press the Options soft key, and select Add or press the  
key to enter your Phonebook.  
key.  
5. Enter the PIN2 number obtained from T-Mobile’s customer service center  
and create your restricted phone list.  
6. Enter phone number into the list to create the new FDN entry.  
Understanding Your Phonebook 76  
 
Section 8: Messages  
Topics Covered  
This section describes how to send or receive different types of messages. It also  
explains the features and functionality associated with messaging.  
Types of Messages  
Your phone provides the following message types:  
Text Messages  
Picture Messages  
Voice Notes  
Voice Mail  
Broadcast Messages (SIM Dependent)  
Instant Messaging  
77  
       
Text Messages  
Text Messages  
Short Message Service (SMS) allows you to send and receive short text messages to  
and from other mobile phones. In addition, your phone supports the Enhanced  
Messaging Service (EMS), which enables you to include simple graphics, melodies,  
and animated images in your messages. To use this feature, you must subscribe to  
T-Mobile's message service.  
The Message icon (  
) displays when you receive a new text message. When the  
memory is full, the message icon flashes on your phone and you cannot receive any  
new messages. You must delete a message before you can receive additional  
messages.  
Use the Delete option in each message box to erase obsolete messages.  
Create new  
In this menu, you can write and send a text message.  
Creating a Simple Text Message  
1. In Idle mode, press the Menu soft key to access the Menu mode.  
2. Using the Navigation keys, scroll to the Messages icon. Press the Select  
soft key or the  
key to enter the menu.  
3. Highlight the Create new option and press the Select soft key or the  
key.  
4. Highlight the Text message option and press the Select soft key or the  
key.  
5. Create your message.  
Note: For further details about entering characters, see "Changing the Text Input Mode" on page 60.  
You can enter up to 160 standard Alphabet characters per page in your message. The message can  
be up to 12 pages long for a total of 1920 characters.  
6. When you finish entering your message, press the Options soft key. The  
following options are available:  
Insert from: allows you to insert from the Text templates, Phonebook, or  
Bookmarks. The Text messages template allows you to apply one of the preset  
message templates to the text. Select one of the 10 items stored in the Text  
messages Text templates menu. Phonebook allows you to add names and  
phone numbers to your message. Bookmarks allows you to add Internet  
addresses to your message.  
Add content: allows you to add a picture, animation, or melody to your  
message.  
Messages 78  
   
Attach: allows you to attach a Name card, Schedule, Anniversary item,  
Miscellaneous item, or Task to your message.  
Save to Drafts: save the message to your Phone or SIM card.  
Select language: allows you to set the language to English, Français, and  
Español.  
Text style: allows you to format the style of the text.  
For the Text size, Large, Medium, and Small size are available. Text mode options  
are Normal, Underline, and Strikethrough. The options for Bold and Italic are set  
by using the  
key to place a checkmark next to the style attribute. Alignment  
options are Left, Center, and Right.  
Back: allows you save to your draft folder without sending.  
7. Press the Send  
key.  
8. Highlight one of the following send options:  
Recent recipients: allows you to select a number or an address from the last  
20 destinations you entered.  
Phonebook: allows you to enter the phone number you want from your  
phonebook.  
Phone number: allows you to enter a new phone number.  
9. Enter a New number then press the OK soft key. The number you selected  
is entered in the To text box.  
10. Press the Add soft key for the following options:  
Recent recipients: allows you to select from recipients of your previous  
messages.  
Phonebook: allows you to enter the phone number you want from your  
phonebook.  
Phone number: allows you to enter a new phone number.  
Group: allows you to send the text message to an entire group such as Family,  
Work, or Friends.  
FDN list: allows you to enter a contact from your FDN list.  
11. When you finish entering the destinations, press the Send  
key to send  
the message.  
Picture Messages  
This menu allows you to use the Multimedia Message Service (MMS).  
Picture Messaging is a messaging service that provides delivery of personal picture  
messages from phone to phone or from phone to email. The Picture Message icon  
(
) displays on an on-screen tab when you receive a new picture message.  
In addition to the familiar text content available via traditional text messages, picture  
messages can contain images, graphics, voice, and audio clips.  
79  
   
Picture Messages  
Note: A Picture Messaging message is a multimedia presentation contained in a single file. It is not a text  
file with attachments.  
You must first retrieve a picture message from T-Mobile’s network before you can  
i
view the message. The  
displays in your Inbox list to indicate any not yet  
retrieved Picture messages. The Retrieved Multimedia Message icon (  
once you successfully retrieve a new picture message from the network.  
) displays  
Using the Picture Messaging feature, your phone can receive and send messages  
that contain multimedia files, such as photos, sounds and images that you  
downloaded from the Internet, audio or sounds you recorded, and voice lists. This  
function is available only if it is supported by your service provider. Only phones that  
offer picture messaging features can receive and display picture messages.  
Create new  
This menu allows you to create a new picture message and then send it to one or  
more destinations.  
Creating and Sending a Picture Message  
1. In Idle mode, press the Menu soft key to access the Menu mode.  
2. Using the Navigation keys, scroll to the Messages icon and press the  
Select soft key or the  
key to enter the menu.  
3. Highlight the Create new option and press the Select soft key or the  
key.  
4. Highlight the Picture message option and press the Select soft key or the  
key.  
5. Highlight Subject and press the  
key.  
6. Enter the subject of your message and press the  
key.  
Note: For more information about entering characters, see "Using ABC Mode" on page 63.  
7. Highlight the Image & Video option and press the  
key.  
8. Highlight one of the following options and press the Select soft key or the  
key.  
Take picture: launches the camera for you to take a picture.  
Downloaded images: allows you to select a previously downloaded image to  
send in the picture message.  
Photos: allows you to select a picture from your photos folder.  
Record video: launches the camcorder for you to shoot video.  
Messages 80  
Downloaded videos: allows you to select a previously downloaded video file to  
send in the picture message.  
Videos: allows you to select a video from your videos folder.  
Memory card: allows you to select an image or video from the memory card.  
9. Select an image/video and press the Options soft key.  
10. Highlight the Add option and press the Select soft key or the  
key to  
add it to your message.  
11. Highlight the Sound option and press the  
key.  
12. Highlight one of the following options and press the Select soft key or the  
key.  
Record audio: allows you to record a new voice message.  
Sounds: allows you to select a sound from your Sounds folder.  
Voice list: takes you to the Voice list (Recorded audio) folder to select a  
voice note to add.  
Memory card: allows you to select a sound file from your memory card.  
13. Select an audio file and press the Options soft key.  
14. Highlight the Add option and press the Select soft key or the  
key to  
add the sound to your message.  
15. Highlight Message and press the  
key.  
key.  
16. Enter your message and press the  
17. To change the Subject or Message, select a category and press the  
Options soft key. Highlight Edit to edit the item.  
18. To change the image or sound with another one, select a category and  
press the Options soft key. Depending on the category selected, highlight  
Remove media to remove or replace the item.  
19. When you finish creating the message, press the Send to soft key.  
20. Highlight one of the following send options, press the Send soft key or the  
key:  
Recent recipients: allows you to select a number or an address from the last  
20 destinations you entered.  
Phonebook: allows you to enter the phone number you want from your  
phonebook.  
New recipient: allows you to manually enter a phone number or email address.  
My Album: allows you to send the message to My Album.  
My Journal: allows you to send the message to My Journal.  
The number or address selected displays in the To text box.  
81  
Voice Notes  
21. If you selected more than one recipient, press the Options soft key for the  
following options:  
Add recipients: allows you to add additional recipients to this message.  
Change recipient: allows you to change the To, Cc, or Bcc additional  
numbers.  
22. Press the Send  
key. Your phone sends the Picture message.  
Voice Notes  
In this menu, you can record a voice note of up to one minute long and then  
immediately send it via Picture Messaging. The Voicemail Message icon (  
displays when you receive a new voice note message.  
)
Creating and sending a Voice Note  
When you access this menu, a timer displays on the screen.  
1. In Idle mode, press the Menu soft key to access the Menu mode.  
2. Using the Navigation keys, scroll to the Voice note icon. Press the Select  
soft key or the key to enter the menu.  
This menu can also be accessed by:  
-
Scrolling to the Messages icon and press the Select soft key or the  
enter the menu.  
key to  
-
-
Highlight the Create new option and press the Select soft key or the  
Highlight the Voice note option and press the Select soft key or the  
key.  
key.  
3. Press the Record soft key to begin recording.  
4. Record a memo by speaking into the phone’s microphone.  
The display simultaneously shows the elapsed time and the remaining  
time.  
5. Press the Stop soft key when you are finished recording. Or, when the  
recording time is expired, the display advances to the next screen.  
Note: Your voice note automatically saves in the Voice list.  
6. Press the Options soft key for the following options:  
Send to: allows you to send the Voice note.  
Play: plays back your Voice note.  
Re-record: discards the previous Voice note and enables you to record a new  
voice note.  
Set default destination: allows you to remove or edit the default destination.  
Messages 82  
   
Set as: allows you to assign the new voice note file as either a Default Ringtone,  
Caller ringtone, or Alarm tone.  
Save: allows you to save the Voice Note in the Voice list.  
7. Highlight the Save option and press the Select soft key or the  
key.  
8. To send the Voice note, press the Send soft key or select the Send to  
option in the Options menu.  
9. Highlight one of the following send options:  
Recent recipients: allows you to select either a number or an address from the  
last 20 destinations you entered.  
Phonebook: allows you to enter the phone number you want from your  
phonebook.  
New recipient: allows you to manually enter a phone number or email address.  
My Album: allows you to send the message to My Album.  
My Journal: allows you to send the message to My Journal.  
10. Highlight the selection and press the  
key.  
11. Follow the instructions depending on which option was selected.  
12. If you selected more than one recipient, press the Options soft key for the  
following options:  
Add recipients: allows you to add additional recipients to this Voice note.  
Change recipient: allows you to select To, Cc or Bcc additional numbers.  
13. Press the Send  
soft key to send this voice note.  
Your phone sends the message. The message saves to the Outbox after it  
successfully sends.  
Inbox  
The Inbox stores received messages. You can tell what kind of message was  
received by the icon displayed. If the icon envelope is open then the message was  
read, otherwise a closed envelope displays.  
The following types of messages may display in your Inbox list:  
Voice note  
Text messages  
Multimedia messages  
Push messages  
83  
 
Inbox  
When you enter the Inbox, the list of messages displays with the sender’s phone  
numbers, or names, if available in your Phonebook. After you read the message, the  
open envelope icon displays.  
Tip: Press the Left or Right Navigation keys to scroll between Inbox, Outbox, and Drafts.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Messages icon. Press the Select  
soft key or the  
key to enter the menu.  
3. Highlight the Inbox option and press the Select soft key or the  
Viewing a Text Message from the Inbox  
1. In Idle mode, press the Menu soft key to access Menu mode.  
key.  
2. Using the Navigation keys, scroll to the Messages icon. Press the Select  
soft key or the key to enter the menu.  
3. Highlight the Inbox option and press the Select soft key or the  
4. Select a text message from the list and press the Options soft key.  
The following options display:  
key.  
Reply via: allows you to send a reply to the sender by sending a Text message,  
Picture message, or Voice note.  
Call back: allows you to call the sender of the text message.  
Forward: allows you to forward the text message to another person.  
Delete: deletes the selected text message or multiple messages.  
Move to phone: allows you to move the message from the SIM card into the  
phone’s memory. This option is only available for messages stored in the SIM  
card. Depends on where the current message was saved.  
Sort by: allows you to sort messages by Read/Unread, Date, Name, Type, Size,  
or Subject.  
Lock/Unlock: allows you to protect the message from deletion or unlock the  
message for deletion.  
5. Press the View  
key (from the main listing) to read the message  
contents.  
6. To scroll through the text, press the Up or Down Navigation key.  
Press the Options soft key while reading a text message to display the  
following:  
Reply via: allows you to send a reply to the sender by sending a Text message,  
Picture message, or Voice note.  
Call back: allows you to call the sender of the text message.  
Messages 84  
 
Forward: allows you to forward the message to another number.  
Save address: allows you to extract the sender’s number and URL, email  
addresses or phone numbers from the message text, so that you can save them  
in your phone’s memory.  
Delete: allows you to delete the message.  
Move to phone: allows you to move the message from the SIM card into the  
phone’s memory. This option is only available for messages stored in the SIM  
card. Depends on where the current message was saved.  
Move to SIM card: allows you to move the message from the Phone’s memory  
into the SIM card. This option is only available for messages stored in the  
Phone’s memory. Depends on where the current message was saved.  
Lock/Unlock: allows you to protect the message from deletion or unlock the  
message for deletion.  
Viewing a Picture Message from the Inbox  
1. Highlight a retrieved picture message  
from the list and press the  
Options soft key. The following options display:  
Reply via: allows you to send a reply to the sender by sending a Picture  
message, Text message, or Voice note.  
Reply all via: allows you to send a reply to the sender by sending a Picture  
message or Voice note.  
Call back: allows you to call the sender back.  
Forward: allows you to forward the message to another number.  
Delete: deletes either a selected or multiple picture messages.  
Sort by: allows you to sort messages by Read/Unread, Date, Name, Type, Size,  
or Subject.  
Lock/Unlock: allows you to protect the message from deletion or unlock the  
message for deletion.  
Properties: shows you information about the message, such as time and date  
the message was received, the sender’s email address or phone number,  
recipient’s email address or phone number, Cc, message size, priority, and class.  
2. Press the View  
soft key (from the main listing) to begin the retrieval  
process and view the message contents.  
3. Press the Options soft key while viewing the Picture message. The  
following options display:  
Reply via: allows you to send a reply to the sender by sending a Picture  
message, Text message, or Voice note.  
Reply all via: allows you to send a reply to the sender by sending a Picture  
message or Voice note.  
Call back: allows you to call the sender back.  
Forward: allows you to forward the message to another number.  
85  
 
Inbox  
Replay: allows you to redisplay the picture.  
Save address: allows you to save the phone number or email address of the  
person who sent this Picture message.  
Save media: allows you to save the media to the appropriate folder.  
Delete: deletes the selected picture message.  
Lock/Unlock: allows you to protect the message from deletion or unlock the  
message for deletion.  
Properties: shows you information about the message, such as time and date  
the message was received, the sender’s email address or phone number,  
recipient’s email address or phone number, Cc, message size, priority, and class.  
4. To scroll through the contents, press the Up or Down Navigation keys.  
5. Press the Back soft key or the  
when you are finished viewing the  
message.  
Listening to a Voice Note from the Inbox  
1. Select a Voice Note  
from the list and press the Options soft key.  
The following options display:  
Reply via: allows you to send a reply to the sender by sending a Voice note,  
Text message, or Picture message.  
Reply all via: allows you to send a reply to the sender by sending a Voice note  
or Picture message.  
Call back: allows you to call the sender back.  
Forward: allows you to forward the message to another number.  
Delete: allows you delete either a selected or multiple saved voice notes.  
Sort by: allows you to sort messages by Read/Unread, Date, Name, Type,  
Size, or Subject.  
Lock/Unlock: allows you to protect the message from deletion or unlock the  
message for deletion.  
Properties: shows you information about the message, such as time and date  
the message was received, the sender’s email address or phone number,  
recipient’s email address or phone number, Cc, message size, priority, and class.  
2. Press the Play  
key (from the main listing) to listen to the message  
contents.  
Press the Options soft key while listening to the message and choose from  
the following:  
Reply via: allows you to send a reply to the sender by sending a Voice note, Text  
message, or Picture message.  
Reply all via: allows you to send a reply to the sender by sending a Voice note  
or Picture message.  
Call back: allows you to call the sender back.  
Messages 86  
 
Forward: allows you to forward the message to another number.  
Replay: allows you to replay the voice note.  
Delete: allows you to delete the selected message.  
Save address: allows you to cut and paste the address to send a text message,  
or picture message.  
Save media: allows you to save message media to your Voice list.  
Lock/Unlock: allows you to protect the message deletion.  
Properties: shows you information about the message, such as time and date  
the message was received, the sender’s email address or phone number,  
recipient’s email address or phone number, Cc, message size, priority, and class.  
Viewing a Picture Message After You Receive It  
When a new picture message comes in, the display shows the Picture Messaging  
Message icon (  
) on an on-screen tab.  
1. Press the View soft key to view the message.  
Press the Exit soft key if you want to view the message later in the Inbox.  
2. Press the Options soft key to access the various options described above.  
3. Press the  
key when you are finished.  
Outbox  
This message box stores messages that you sent.  
When you enter this menu, the list of messages in the Outbox displays with the  
recipients’ phone numbers or names, if available in your Phonebook.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Messages icon. Press the Select  
soft key or the  
key to enter the menu.  
3. Highlight the Outbox option and press the Select soft key or the  
key.  
Note: Press the Left or Right Navigation keys to scroll between Inbox, Outbox, and Drafts.  
4. Select a message from the list and press the View  
key to view the  
message contents.  
Tip: Press the Options soft key while reading a message to select alternate options.  
87  
     
Drafts  
Drafts  
This message box stores messages that you may want to edit or send at a later time.  
When you enter this menu, the list of messages in the box displays.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Messages icon. Press the Select  
soft key or the  
key to enter the menu.  
3. Highlight the Drafts option and press the Select soft key or the  
Note: Press the Up or Down Navigation keys to scroll between Inbox, Outbox, and Drafts.  
4. Select a message from the list and press the Options soft key.  
key.  
5. Highlight the Edit option and press the Select soft key or the  
key to  
edit the message contents.  
6. Press the Send  
soft key (while viewing the message) to send the  
message.  
Tip: Press the Options soft key while reading a message to select alternate options.  
Templates  
Besides entering message text using the keypad keys, you can speed up message  
composition by including copies of stored text or picture (Templates) in your  
message.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Messages icon. Press the Select  
soft key or the  
key to enter the menu.  
3. Highlight the Templates option and press the Select soft key or the  
key.  
4. Highlight either the Text templates or Picture message templates option  
and press the Select soft key or the  
key.  
Text templates: consist of a pre-created list of frequently used sentences.  
Picture message template: consists of previously created audio/video segments.  
5. Highlight a template entry and press the Options soft key. You can choose  
from ten predefined sentences that you can add to your text message to  
save time.  
Messages 88  
       
6. Highlight the Send option, press either Text message or Picture  
message, and press the Select soft key or the key.  
7. Press the Send soft key to send the message.  
Voice Mail  
This menu provides you with a way of accessing your voice mailbox, if provided by  
your network.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Messages icon. Press the Select  
soft key or the  
key to enter the menu.  
3. Highlight the Voice mail option and press the Select soft key or the  
key.  
Note: Before you can use the Voice Mail feature, you must obtain the voice server number from T-Mobile  
customer service.  
The following options display:  
Call voice mail: pressing the Select soft key or the  
messages.  
key to listen to your  
Tip: In Idle mode you can also press and hold the  
key to connect to the voice server.  
Voice server number: allows you to change the voice mail server number, if  
necessary.  
Note: Voice mail is a network feature. Please contact T-Mobile customer service for further details.  
Delete all  
This menu allows you to delete all of the messages in each message box. Or, you  
can also delete all of your messages in all message boxes at one time.  
Important!: Once messages are deleted, they cannot be recovered.  
1. Press the Up or Down Navigation key to select a message box to clear. To  
delete all of your messages, select the All option.  
2. Press the  
key to place or remove a check mark.  
3. Press the Delete soft key to delete the marked objects.  
4. After you receive the Delete? confirmation, press the Yes soft key to delete  
or press the No soft key to cancel.  
89  
       
Settings  
Settings  
In this menu, you can set up a default text message or a picture message. The last  
setting you accessed is automatically activated for sending subsequent messages.  
Text message  
Service center: allows you to store or change the number of your message center,  
which is required when sending messages. You must obtain this number from  
T-Mobile customer service.  
Destination address: allows you to enter a number that you would like to send all  
messages to. You can still message others, but this number always displays in the  
Recipient list.  
Validity period: allows you to set the length of time your text messages are stored  
at the message center while attempts are made to deliver them.  
Reply path: allows the recipient of your message to send you a reply message  
using your message center, if your network supports this service.  
Delivery report: allows you to activate or deactivate the report function. When this  
function is activated, the network informs you whether or not your message was  
delivered.  
Picture message  
Use the following options to set Send and Receive settings for Picture messages.  
Send Settings  
Delivery report: when this option is enabled, the network informs you whether or  
not your message was delivered.  
Read reply: when this option is enabled, your phone sends a request for a reply  
along with your message to the recipient.  
Priority: you can select the priority level of your messages.  
Expiry: set the length of time your messages are stored in the message center  
while the network attempts to deliver them.  
Delivery after: you can set a delay time before the phone sends your messages.  
Receive Settings  
Anonymous reject: you can set your phone to automatically reject anonymous  
messages.  
Ads allowed: you can set your phone to automatically receive advertising  
messages.  
Report allowed: you can set the option to receive a delivery report.  
Messages 90  
           
Memory Status  
You can view the amount of the allocated memory and the memory available for  
picture messages.  
The display shows the total space including the used and free space. You can also  
view how much space and the number of messages currently occupying each  
message box type:  
Text Message (saved on the phone) (  
Text Message (saved on the SIM card) (  
)
)
-
Inbox  
-
Outbox  
-
Draft  
Picture message  
-
Inbox  
-
Outbox  
Draft  
Template  
-
-
Push messages  
Broadcast Messages (SIM Card Dependent)  
This network service allows you to receive text messages on various topics, such as  
the weather or traffic.  
Please contact T-Mobile's customer service center for further details.  
Instant Messaging (IM)  
Instant Messaging is a way of sending short, simple messages that are delivered  
real time to users online.  
Before using this feature, you need to subscribe to a messenger service. Your  
handset has 4 pre-loaded Messaging services (AIM, ICQ, Windows Live, and Yahoo!).  
Note: Contact T-Mobile customer service for further details.  
Starting your Instant Messaging  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the IM icon. Press the Select soft key  
or the  
key to enter the menu.  
91  
             
Instant Messaging (IM)  
3. Highlight the messenger service to which you have previously subscribed  
to by using the Up or Down Navigation key and press the Select soft key  
or the  
4. Highlight the Sign on, Connect, or Sign in option, depending on your  
messenger service and press the Select soft key or the key.  
key.  
5. Enter the required sign on information such as ID and password, then  
press the Down Navigation key.  
Note: The information required for sign on varies depending on the Instant Messaging provider you use.  
6. Fill in all the appropriate fields and press the Sign in soft key or the  
key.  
7. Agree to the terms and conditions of use for this service and press the  
I agree soft key or the  
key.  
8. Follow the on-screen instructions to read, reply to, compose, send, and  
manage your Instant Messaging account.  
Using the Instant Messenger Options  
After selecting an Instant Messaging service, the following options display:  
Sign on/Connect/Sign in: allows you to login to your Instant Messaging account.  
Saved conversations: displays permanent records of your Instant Messaging  
conversations.  
Offline conversations: displays a listing of any conversations made while you  
were offline (this options applies only to AIM and ICQ messenger).  
Preferences: allows you to change your Preferences.  
Help: provides helpful information about IM providers such as: Sign up, Sign on,  
Buddies, Sending IMs, Receiving IMs, Privacy, and Away.  
Messages 92  
 
Section 9: Changing Your Settings  
Topics Covered  
This section explains the sound and phone settings for your phone. It includes such  
settings as: display, security, memory, and any extra settings associated with your  
phone.  
Wi-Fi Settings  
Once set up for Wi-Fi connectivity, your phone automatically uses Wi-Fi, when  
available, for all your mobile phone services. For more information, refer to "Wi-Fi"  
Time & Date  
This menu allows you to change the current time and date displayed.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Settings icon. Press the Select soft  
key or the  
key to enter the menu.  
93  
           
Time & Date  
3. Highlight the Time & date option and press the Select soft key or the  
key.  
The following options are available:  
Time zone updating: allows you to set the parameter for updating the on board  
time to either: Automatic (via carrier sync up), Manual only (user-defined),  
Prompt first (User is prompted for time change, if available).  
Home zone: allows you to set your primary time zone.  
Time: allows you to change the hour and minute.  
AM/PM: allows you to set either AM or PM.  
Time format: allows you to select whether your time displays in either a  
12 hours or 24 hours format.  
Date: allows you to enter the month, day, and year.  
Date format: allows you to select MM/DD/YYYY, DD/MM/YYYY, or YYYY/MM/DD  
format.  
Week start day: allows you to select the day of the week you wish to set as a start  
day. Choose from Sunday or Monday.  
To change your time and date settings:  
1. Use the Up or Down Navigation key to select the option you wish to  
change.  
2. Use the Left or Right key to position the cursor over the number you wish  
to change.  
3. Enter the desired number.  
4. To change other options, use the Navigation keys to select the desired  
setting.  
5. Press the Save soft key when you are finished changing your settings;  
otherwise press the Cancel soft key.  
Note: Automatic updates of time and date do not change the time set for alarm settings or  
calendar memos.  
Changing Your Settings 94  
Phone Settings  
You can customize various phone settings.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Settings icon. Press the Select soft  
key or the  
key to enter the menu.  
3. Highlight the Phone settings option and press the Select soft key or the  
key. The following options display:  
Language  
This menu allows you to select a display language for Text language and Input mode.  
Choose from Automatic, English, Français, and Español.  
Greeting message  
This menu allows you to set a text greeting to be displayed briefly when the phone is  
switched on.  
For details about entering characters, see "Entering Text" on page 60.  
Slide settings  
You can configure what action the phone will take when a particular sliding action is  
taken. The top portion of the phone can either slide open or closed.  
1. Highlight the Up option and then use the Left or Right Navigation key to  
select the action the phone will take when the cover slides up: Accept call  
or None.  
When the Accept call option is selected, you can simply slide open the phone to  
answer an incoming call. When None is selected, you must press a key to  
answer the incoming call, depending on the answer setting.  
2. Highlight the Down option and then use the Left or Right Navigation key to  
select the action the phone will take when the cover slides down: Stop  
operation or Continue operation.  
3. Press the Save soft key when you are finished changing your settings;  
otherwise press the Cancel soft key.  
95  
         
Phone Settings  
USB settings  
This menu selects the method of communication for the USB port, the options  
include:  
Modem: allows you to use the phone as a wireless modem for communication  
between a computer and the Internet.  
Mass storage: allows you to utilize the onboard storage capacity of the phone  
to store and upload files. This option allows your computer to detect the phone  
as a removable storage drive.  
Note: You must select Modem to connect to PC Studio.  
Extra settings  
You can turn the automatic redialing or answering features on or off.  
1. To turn a feature on, highlight the feature and press the  
key.  
A check mark displays in front of the option.  
2. To turn a feature off, highlight the checked feature and press the  
key.  
The check mark no longer displays.  
The following options are available:  
Auto redial: when this option is checked, the phone makes up to ten attempts to  
redial a phone number after an unsuccessful call.  
Note: The interval between call attempts varies.  
Anykey answer: when this option is checked, you can answer an incoming call by  
pressing any key, except the  
key or the Reject soft key. To reject the call,  
press the  
key or the Reject soft key. When this option is unchecked, you  
must press the  
key or the Accept soft key to answer a call.  
3. When you finish changing your settings, press the Save soft key to save  
your settings. Otherwise press the Cancel soft key.  
Changing Your Settings 96  
   
Airplane mode  
Airplane Mode allows you to use many of your phone’s features, such as Games,  
Voice Notes, etc., when you are in an airplane or in any other area where making or  
receiving calls or data is prohibited. When your phone is in Airplane Mode, it cannot  
send or receive any calls or access online information.  
1. To turn a feature on, highlight the Airplane mode option and press the  
Select soft key or the  
2. Highlight On or Off and press the Save soft key.  
Display Settings  
key.  
In this menu, you can change various settings for the display or backlight.  
Wallpaper  
This menu allows you to change the background image to be displayed in Idle mode.  
1. Highlight the Wallpaper option and press the  
key to open the  
following options:  
Browse wallpapers: allows you to download additional wallpapers from t-  
zones.  
Default wallpapers: allows you to choose from a list of wallpapers included  
with your phone.  
Downloaded images: allows you to choose a photo from your downloaded  
images folder.  
Photos: allows you to choose a photo from Photos folder.  
To change the background image:  
1. Press the Navigation keys to scroll through the list and select a wallpaper.  
2. Place a checkmark on the Menu background option by pressing the  
key.  
3. Highlight the Transparency option and press the Left or Right Navigation  
key to determine the amount of transparency for the background.  
4. Make a selection and press the Save soft key or the  
key.  
97  
   
Display Settings  
Info display  
You can select the text style and text color of the informational text displayed on the  
Main LCD.  
1. Highlight an option and press the Left or Right Navigation keys to change  
the settings.  
2. Press the Save soft key to apply your changes, or the Cancel soft key  
to cancel.  
Skin  
You can select the background color of the menus displayed on the Main LCD. There  
are two different patterns (Black or White) from which to choose.  
1. Press the Up or Down Navigation keys to change the settings.  
2. Press the Save soft key to apply your changes, or the Cancel soft key to  
cancel.  
Brightness  
You can adjust the display brightness of the Main LCD to make it easier to see under  
different lighting conditions.  
1. Press the Left or Right Navigation keys to change your settings.  
2. Press the Save soft key to save your changes, or the Cancel soft key  
to cancel.  
Backlight  
In this menu, you can select the length of time that the keypad backlight is on and  
how much longer the display is illuminated before going off.  
The On setting is how long the keypad backlight is on. You can select 15 sec,  
30 sec, 1 min, 3 min, or 10 min.  
The Dim option is how much longer after the keypad backlight goes off that the  
display remains lit. You can select Off, 15 sec, 30 sec, 1 min, or 3 min.  
For example, if you set On for 30 sec and Dim for 15 sec, after 30 seconds the  
backlight on the keys would turn off and 15 seconds later the display light would  
turn off.  
1. Press the Left or Right Navigation keys to change each field’s settings.  
2. Press the Save soft key to save your changes, or the Cancel soft key  
to cancel.  
Changing Your Settings 98  
       
Dialing display  
This menu allows you to select the size and color of your dialing font and the  
background color.  
To change the size of the font:  
1. Highlight the Font size option and press the Select soft key or the  
key.  
2. Use the Left or Right key to select between: Large, Medium, or Small.  
3. Press the Save soft key or the  
key to save your change. Otherwise,  
press the Cancel soft key.  
To change the color of the font:  
1. Highlight the Font color option and press the Select soft key or the  
key.  
2. Use the Left or Right key to select either Basic (black), Rainbow,  
Monochrome or Gradation. If you select Monochrome or Gradation, you  
can select another option by using the Down Navigation key and then  
scrolling through the available choices.  
3. Choose from up to 15 different options.  
4. Press the Save soft key or the  
key to save your change. Otherwise,  
key.  
press the Cancel soft key or the  
To change the background color:  
1. Highlight the Background color option and press the Select soft key or  
the key.  
2. Use the Left or Right key to select between 20 different colors or None.  
3. Press the Save soft key or the  
key to save your change. Otherwise,  
press the Cancel soft key.  
Calendar  
This option allows you to On (enable) or Off (disable) the calendar display for your  
background wallpaper.  
Show caller information  
The Show Caller Information option, when turned On, displays information such as  
the caller name on your screen when your missed calls are listed. Caller must  
already be on your Contact list for additional information to display. Select the Off  
option to display only the phone number on the screen.  
99  
       
Bluetooth  
Bluetooth  
About Bluetooth  
Bluetooth is a short-range wireless communications technology capable of  
exchanging information over a distance of about 30 feet without requiring a physical  
connection.  
Unlike infrared, you don't need to line up the devices to beam information with  
Bluetooth. If the devices are within a range of one another, you can exchange  
information between them, even if they are located in different rooms.  
The following Bluetooth options are available:  
Turn Bluetooth On/Off  
This option allows you to turn Bluetooth On or Off.  
Make a selection and press the Select soft key or the  
key.  
My devices  
This option allows you to search for new Bluetooth devices.  
Highlight the Search new device option and press the Select soft key or  
the key. The phone then searches for available devices.  
Bluetooth services  
Actually, the Bluetooth specification is a protocol that describes how the short-range  
wireless technology works, whereas individual profiles describe the services  
supported by individual devices. Profiles reduce the chance that different devices  
integrate.  
The following Service profiles are available:  
- Headset: The remote Bluetooth headset enables both incoming and outgoing calls.  
- Handsfree: The remote Bluetooth car kit enables both incoming and outgoing calls.  
Help  
Accesses the t-zones site for general help information.  
Sound Settings  
You can customize various sound settings.  
Incoming call  
Note: When downloading Mega Tones® or HiFi RingersTM, charges may apply.  
Changing Your Settings 100  
                   
Browse MegaTones  
Using the Browse MegaTones option on the sounds list, you can quickly access the  
T-Mobile website and download new sounds by using the t-zone browser.  
Press the Connect soft key to purchase additional sound files.  
Browse HiFi Ringers  
Using the Browse HiFi Ringers option on the sounds list, you can quickly access the  
T-Mobile website and use the t-zone browser to download new HiFi Ringers.  
Press the Connect soft key to purchase additional ringtones.  
Ring tone  
This menu allows you to select a ring melody.  
1. Highlight Ring tone and press the  
key.  
2. Use the Up or Down key to highlight a ring tone or press the Left or Right  
key to select a file from either the Default melodies, Voice list,  
Downloaded sounds, or Music folders.  
3. Press the Select soft key or the  
Volume  
This menu allows you to adjust the ring volume to one of 7 levels.  
Use the Right or Left key to increase or decrease the volume.  
key.  
Alert type  
This menu allows you to specify how you are to be informed of incoming calls.  
Use the Right or Left key to select a Alert type.  
The following options are available:  
Melody: the phone rings using the ring melody selected in the Ring tone  
menu.  
Vibration: the phone vibrates but does not ring.  
Melody and vibration: the phone rings using the ring melody, and also  
vibrates.  
Vibration then melody: the phone vibrates 3 times and then starts ringing.  
Melody then vibration: the phone rings using the ring melody, then vibrates.  
Keypad tone  
This menu allows you to select the key tone and volume that the phone sounds when  
you press a key.  
1. Highlight the On/Off field and use the Right or Left Navigation keys to  
make your selection.  
101  
                         
Sound Settings  
2. Select On or Off to turn the sound on or off.  
3. Highlight the Key Tone field and press the  
key to display the Keypad  
tone options.  
4. Highlight one of the following and press the Select soft key.  
Xylophone  
Beep  
Voice  
5. Scroll to Volume using the Up or Down Navigation keys.  
6. Press the Left or Right Navigation keys to adjust the volume (levels 1-7).  
7. Press the Save soft key or the  
key to save your change. Otherwise,  
key to return to Idle mode.  
press the Cancel soft key or the  
Message tone  
This menu allows you to set up the ringer for incoming messages. You can set the  
Tone, Alert type, and Repetition.  
1. Highlight the Tone field and use the  
key to display the options. Select  
Tone1, Tone2, Tone3, or Tone4, and press the Select soft key.  
2. Highlight the Alert type field and use the Left or Right Navigation keys to  
highlight one of the following, and press the Select soft key.  
Melody: the phone rings using the ring melody selected in the Ring tone  
menu.  
Vibration: the phone vibrates but does not ring.  
Vibration then melody: the phone vibrates 3 times and then starts ringing.  
Off: turns off all message alert types.  
3. Scroll to Repetition using the Up or Down Navigation keys.  
4. Press the Left or Right Navigation keys to select how many times the tone  
is repeated: Once, Every 1 min, or Every 2 min.  
5. Press the Save soft key or the  
Otherwise, press the Cancel soft key or the  
Power-on/off tone  
key to save your change.  
key to return to Idle mode.  
This menu allows you to select the melody that the phone sounds when it is  
switched on and off.  
To turn off the sound, select Off.  
Changing Your Settings 102  
   
Slide tone  
This menu allows you to choose from four tones, or Off when opening the slide of  
your phone.  
Silent mode  
This menu allows you to select whether or not your phone vibrates while in silent  
mode. You may choose between Vibration and Mute.  
Extra tones  
You can customize additional tones for the phone.  
1. Press the  
front of the option. Press the Save soft key to save the setting.  
2. Press the key twice to turn a selected tone Off. The check mark no  
longer displays in front of the option.  
The following options are available:  
key to turn a selected tone On. A check mark displays in  
- Indicative tone: generates a tone whenever a pop-up window displays on the  
screen.  
- Minute minder: sets whether or not the phone beeps every minute during an  
outgoing call to keep you informed of the length of your call.  
- Connection tone: sets whether or not the phone beeps when your call is  
connected to the system.  
- Alerts on call: sets whether or not you receive tones when a message arrives  
while you are on a call.  
3. Press the Save soft key to save the setting, otherwise press the Cancel  
soft key.  
Synchronization  
The first time you access the synchronization feature the handset prompts with the  
following message:  
Would you like to store a copy of your contacts on My.T-Mobile.com so you  
can view and manage your contacts online?”  
1. Press the  
key to agree to the copying of the contact information.  
Once the process is complete a new message appears:  
Synchronization complete! Phone will automatically sync on every  
phonebook edit you make. To change sync settings go to, Settings >  
Synchronization. To manage your contacts, go to: “t-mobile.com”.  
103  
               
Synchronization  
This feature allows you to back up (synchronize) Contact information, Calendar, and  
Tasks stored on your phone with your T-Mobile account on the network. Each time  
you edit contact information your phone automatically synchronizes with the web  
Address Book.  
2. Press the OK soft key to complete the process and return to the idle  
screen.  
Important!: Synchronization is a service offered to T-Mobile customers.  
Sync Now  
Once you establish the information you want to synchronize (using the Data to Sync  
option), this feature allows you to synchronize with the T-Mobile network.  
1. In Idle mode, press the Menu soft key.  
2. Scroll to Settings and press the Select soft key or the  
3. Select Synchronization by pressing the Up or Down Navigation key and  
press the Select soft key or the key.  
4. Highlight Sync Now and press the Select soft key or the  
key.  
key.  
The information synchronizes with the T-Mobile network and a  
confirmation dialog displays when finished.  
5. Press the  
Data to Sync  
key to return to Idle mode.  
This feature allows you to synchronize your Contacts, Calendar events, and Task lists  
with your T-Mobile account on the network.  
1. In Idle mode, press the Menu soft key.  
2. Scroll to Settings and press the Select soft key or the  
3. Select Synchronization by pressing the Up or Down Navigation key and  
press the Select soft key or the key.  
4. Highlight Data to Sync and press the Select soft key or the  
key.  
key.  
5. Highlight the type of data to synchronize (Contacts, Calendar or Task) and  
press the OK soft key to display a check mark next to the item to  
synchronize.  
6. Press the Save soft key.  
7. Select the Sync Now option and press the Select soft key or the  
key.  
Changing Your Settings 104  
   
8. When the “Synchronizing with my.t-Mobile.com” message displays,  
press the Continue soft key.  
9. Press the key to return to the Idle mode.  
Viewing the synchronization log  
This feature creates a log of the synchronization activity for viewing.  
1. In Idle mode, press the Menu soft key.  
2. Scroll to Settings and press the Select soft key or the  
3. Select Synchronization by pressing the Up or Down Navigation key and  
press the Select soft key or the key.  
4. Highlight View Log and press the Select soft key or the  
key.  
key.  
5. The View Log screen displays the Start time, Status, Phone to server  
and Server to phone information.  
6. Press the Back soft key when you are finished viewing the log.  
7. Press the  
key to return to Idle mode.  
About Sync  
This feature displays information about how the synchronization feature works and  
provides a URL for more specific synchronization information.  
Note: Your t-zones feature must be activated by T-Mobile for this feature to work.  
Synchronizing your Phonebook  
This feature allows you to back up (synchronize) your Phonebook information stored  
on your handset with your T-Mobile account on the network.  
Phonebook is wirelessly synchronized on your device using Microsoft Exchange  
Server and ActiveSync.  
To synchronize your Phonebook with the T-Mobile network:  
1. In Idle mode, press the Menu soft key.  
2. Scroll to Fun & Apps and press the Select soft key or the  
key.  
key.  
3. Select Organizer and press the Select soft key or the  
4. Highlight Synchronization by pressing the Up or Down Navigation key  
and press the Select soft key or the key.  
105  
   
Network Services  
5. Highlight Data to Sync and press the Select soft key or the  
key.  
6. Highlight Phonebook and press the  
key to place a check mark next to  
the Phonebook selection.  
7. Press the Save soft key to store this preference and return to the previous  
screen.  
8. Select the Sync Now option and press the Select soft key or the  
key.  
The data synchronizes with the T-Mobile network and a confirmation  
dialog displays when finished.  
9. Press the  
key to return to the Idle mode, or the Back soft key to  
return to the Synchronization menu when the Sync Completed message  
displays.  
Network Services  
Call forwarding  
This network service enables incoming calls to be re-routed to a secondary,  
pre-specified number.  
Example: Forwarding business calls to a colleague while on holiday.  
To set your call forwarding options:  
1. Select the Call forwarding option and then press the Select soft key or the  
key.  
2. Select a call forwarding option by pressing the Up or Down Navigation key  
and then press the Select soft key or the  
key.  
The following options are available:  
Forward always: all calls are forwarded until this feature is cancelled.  
Busy: calls are forwarded when you are already on another call.  
No reply: calls are forwarded when you do not answer the phone. Select the  
length of time the network waits for before forwarding a call.  
Unreachable: calls are forwarded when you are not in an area covered by  
T-Mobile or when your phone is switched off.  
Cancel all: all call forwarding options are canceled.  
3. Select the type of forwarded calls, Voice calls or Data calls, by pressing  
the Up or Down Navigation key to select the appropriate field, and then  
press the Select soft key or the  
key.  
The current status displays. If the option was already set, the number to  
which the calls are forwarded displays.  
Changing Your Settings 106  
     
4. To activate call forwarding for the call type, select Activate by using the  
Left or Right key. The Forward to field then becomes available to input  
the number.  
Select Deactivate by using the Left or Right key to deactivate call  
forwarding.  
5. Enter the number to which the calls are to be forwarded in the Forward to  
text box and press the Select soft key or the  
To enter an international code, press and hold the  
+ sign displays.  
key.  
key until the  
The phone sends your settings to the network and the network’s  
acknowledgement displays.  
Call barring (SIM Card Dependent)  
Call barring allows you to restrict specific types of incoming and outgoing calls on  
your phone. This is useful if you allow someone to use your phone for a short period  
of time.  
Call waiting  
This network service informs you when someone is trying to reach you during  
another call.  
You can specify individual call waiting options for voice calls and/or data calls. To set  
your call waiting options:  
1. Select the type of calls, Voice calls or Data calls, to which the call waiting  
option is to be applied by pressing the Up or Down Navigation key.  
The screen informs you whether call waiting is activated or deactivated.  
2. Press the Select soft key or the  
key to access the call’s status menu.  
3. Highlight Deactivate or Activate and press the Select soft key or the  
key.  
Call waiting activates or deactivates for the selected call type.  
4. Select the Cancel all option to deactivate Call waiting on all voice and data  
calls.  
107  
     
Network Services  
Network selection  
The Network Selection feature enables you to automatically or manually select the  
network used when roaming outside of your home area.  
Note: You can select a network other than your home network only if there is a valid roaming agreement  
between the two.  
To change the Network Selection mode:  
1. Highlight the Search now option and press the Select soft key or the  
key.  
2. Press the Up or Down Navigation key until the network you want highlights  
and then press the Select soft key or the  
The phone scans for that network and, if available, you are connected.  
To change your Default setup:  
key.  
1. Highlight the Default setup option and press the Select soft key or the  
key.  
2. Highlight either the Automatic or Manual option and press the Select soft  
key or the  
key.  
If you select Automatic, you connect to the first available network when  
roaming.  
If you select Manual, the phone begins searching for available networks. Press  
the Up or Down Navigation key until the network you want is highlighted and  
then press the Select soft key or the  
key. The phone then scans the  
selected network to see if you can be connected, and if a connection is possible,  
you are connected.  
Caller ID  
You can prevent your phone number displaying on the phone of the person you  
called.  
Note: Some networks do not allow you to change this setting.  
The following options are available:  
- Default: the default setting provided by the network is used.  
- Hide number: your number does not display on the other person’s phone.  
- Send number: your number is sent each time you make a call.  
Changing Your Settings 108  
       
Security  
The Security feature enables you to restrict the use of your phone by others and to  
restrict the types of calls.  
Various codes and passwords are used to protect the features of your phone.  
PIN check  
When the PIN Check feature is enabled, you must enter your PIN each time you  
switch on the phone. Consequently, any person who does not have your PIN cannot  
use your phone without your approval.  
Note: Before enabling or disabling the PIN Check feature, you must enter your PIN.  
The following options are available:  
- Disable: the phone connects directly to the network when you switch it on.  
- Enable: you must enter the PIN each time the phone is switched on.  
Change PIN  
This feature allows you to change your current PIN, provided that the PIN check  
feature is enabled. You must enter the current PIN before you can specify a new one.  
Once you enter a new PIN, you are asked to confirm the PIN number by  
re-entering it.  
Phone lock  
When the Phone lock feature is enabled, the phone is locked and you must enter the  
4- to 8-digit phone password each time the phone is switched on.  
Once the correct password is entered, you can use the phone until you switch it off.  
The following options are available:  
- Disable: you are not asked to enter the phone password when you switch on the  
phone.  
- Enable: you are required to enter the phone password when you switch on the  
phone.  
Change password  
The Change password feature allows you to change your current phone password to  
a new one. You must enter the current password before you can specify a new one.  
Once you enter a new password, you are asked to confirm the change by entering  
the password again.  
109  
             
Security  
Note: If you change your password, be sure to record it and keep it in a safe place. If you forget your  
password, contact your Service Provider for assistance.  
Lock application  
With this feature you can lock your applications which provide access to information  
such as call records, phonebook, messages, images, and sounds. Once you lock the  
contents, you must enter the phone’s password to access the associated menus.  
1. Press the Up or Down Navigation key to select an item to lock  
2. Press the  
key to place a check mark on the selected item.  
To lock all of the contents, select All.  
3. Highlight the previously selected item and press the  
key to remove a  
check mark.  
4. Press the Save soft key to lock the marked items.  
5. Enter a password and press the OK soft key or the  
key.  
FDN mode  
FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict  
your outgoing calls to a limited set of phone numbers.  
The following options are available:  
- Disable: you can call any number.  
- Enable: you can only call phone numbers stored in Phonebook. You must enter your  
PIN2. You can obtain your PIN2 from T-Mobile’s customer service.  
Change PIN2  
The Change PIN2 feature allows you to change your current PIN2 to a new one. You  
must first enter the current PIN2 (obtained from T-Mobile) before you can specify a  
new one. Once you enter a new PIN2, you are asked to re-enter the new PIN2 to as  
confirmation.  
Note: Not all SIM cards have a PIN2. This menu does not display if your SIM card does not have the PIN2  
feature.  
Changing Your Settings 110  
 
Software Update  
The Software Update feature enables you to use your phone to connect to the  
network and upload any new phone software directly to your phone.  
1. In Idle mode, press the Menu soft key.  
2. Scroll to Settings and press the Select soft key or the  
key.  
3. Select Software update by pressing the Up or Down Navigation key and  
press the Select soft key or the  
key to begin the update process and  
follow the on screen instructions.  
Memory Status  
You can check the amount of the memory being used and the memory remaining for  
Shared memory, Messages, Files, Calendar, Phonebook, and Notes.  
The display shows the total space including the used and free space. You can also  
view how much space is currently occupied by each message box.  
You can also check how many names and numbers are stored in Phonebook, in both  
SIM card and the phone memory. You can also see the capacity of both memories.  
Reset Settings  
From this menu you can reset your phone and sound settings to the default settings.  
The following options are available:  
- All: Phone, Display, Sound and WLAN settings are returned to default values.  
- Phone settings: only phone settings are returned to default values.  
- Display settings: only display settings are returned to default values.  
- Sound settings: only sound settings are returned to default values.  
- WLAN settings: only WLAN settings are returned to default values.  
- Bluetooth settings: only Bluetooth settings are returned to default values.  
To reset your settings:  
1. Highlight one of the options and press the  
key to place a check mark  
next to the option.  
2. Press the Reset soft key.  
3. You are prompted with Reset settings?. Press the Yes soft key.  
4. Enter the 4- to 8-digit password and press the OK soft key or the  
key.  
You receive a reset confirmation message.  
111  
         
Files  
Section 10: Fun & Apps  
Topics Covered  
This section outlines the various applications that are available on your phone.  
Files  
Files allows you to manage your sounds and images and view your memory status in  
one convenient location.  
1. In Idle mode, press the Menu soft key to access the Menu mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select  
soft key or the  
3. Highlight the Files option and press the Select soft key or the  
Sounds  
key to enter the menu.  
key.  
In this menu, you can view the list of sounds downloaded from the web server or  
received in picture messages. You can also set a downloaded sound as the current  
ring tone.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select  
soft key or the  
key to enter the menu.  
3. Highlight the Files option and press the Select soft key or the  
key.  
key.  
4. Highlight the Sounds option and press the Select soft key or the  
Note: When downloading MegaTones® or HiFi RingersTM, charges may apply.  
Fun & Apps 112  
       
The following options are available:  
Browse MegaTones  
Using the Browse MegaTones option on the sounds list, you can quickly access the  
T-Mobile website and download new sounds by using the t-zone browser. Press the  
Select soft key to purchase additional MegaTones.  
Browse HiFi Ringers  
Using the Browse HiFi Ringers option on the sounds list, you can quickly access  
T-Mobile website and use the t-zone browser to download new HiFi Ringers.  
Press the Select soft key to purchase additional ringtones.  
Sounds  
Highlight an item in the Sounds menu and press the Options soft key. The following  
options are available:  
Download new: opens your web browser where you can download new sounds.  
Send via: allows you to send the sound file via a Picture message.  
Set as: allows you to set the sound as a default Ringtone, Caller ringtone, or an  
Alarm tone.  
Delete: allows you to delete the selected sound or multiple sounds.  
Move to memory card: allows you to move the original file to an installed memory  
card.  
Copy to memory card: allows you to move a copy of the selected file to an  
installed memory card.  
Rename: allows you to change the name of the sound.  
Lock/Unlock: allows you to lock the sound to protect it from deletion, or unlock an  
already locked sound.  
Properties: displays the sound name, date, format, length, size, and Lock/Unlock  
status.  
Voice list  
The Voice list contains your recorded audio messages.  
1. Press the  
key to play the selected audio message.  
- or -  
Highlight an item and press the Options soft key. The following options are  
available:  
Send via: allows you to send the audio message via a Picture message.  
Set as: allows you to set this audio message as a Default Ringtone, Caller  
ringtone, or an Alarm tone.  
113  
   
Files  
Delete: allows you to delete the selected audio message or multiple audio  
messages.  
Move to memory card: allows you to move the original file to an installed  
memory card.  
Copy to memory card: allows you to move a copy of the selected file to an  
installed memory card.  
Rename: allows you to change the name of the audio message.  
Lock/Unlock: allows you to lock the audio message to protect it from deletion,  
or unlock an already locked audio message.  
Properties: displays the audio message name, date, format, length, size, and  
Lock/Unlock status.  
Images  
In this menu, you can view the list of images downloaded from the web server, taken  
with the built-in camera, or received in messages. You can set an image as the  
current background image.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select  
soft key or the  
key to enter the menu.  
3. Highlight the Files option and press the Select soft key or the  
key.  
key.  
4. Highlight the Images option and press the Select soft key or the  
The following options are available:  
Browse Wallpapers  
Using the Browse Wallpapers option, allows you to access the T-Mobile website  
and download new images using the t-zone browser.  
Highlight the Browse Wallpapers option and press the  
key.  
Note: When downloading Wallpapers, charges may apply.  
Photos  
In this menu you can review the photos you’ve taken.  
Highlight a photo and press the Options soft key to choose from the  
following options:  
View: allows you to view the photo on your display.  
Send to My Album: allows you to send your photos to My Album.  
Send via: allows you to send your photos as an attachment to a Picture  
message.  
Set as: allows you to set the photo as your Wallpaper or as a Caller ID.  
Fun & Apps 114  
Delete: allows you to delete the selected photo or multiple photos.  
Default destination: allows you to Remove or Change where your photos are  
sent after you take them.  
Move to memory card: allows you to move the original file to an installed  
memory card.  
Copy to memory card: allows you to move a copy of the selected file to an  
installed memory card.  
Edit image: allows you to the a selected photograph by using some presets  
features such as: Effects, Frames, Emoticons, and Clip Art.  
Rename: allows you to rename the photo.  
Display mode: allows you to view the photos in Line view or Thumbnail view.  
Slide show: allows you to see all of your photos in a slide show presentation.  
Lock/Unlock: allows you to lock the photo to protect it from deletion, or unlock  
an already locked photo.  
Properties: displays the image name, date, format, resolution, size, and  
Lock/Unlock status.  
My Album  
My Album is a private online picture album that you can use to store and share  
pictures, videos, voice messages, and text. For more information, see "My Album"  
Use the following procedures to access My Album.  
Note: When accessing My Album, charges may apply.  
1. In your t-zone browser, select the My Albums Menu link and press the  
Select soft key or the  
key.  
2. Photos sent to this folder are stored in the Inbox Album.  
3. Use the Up or Down key to highlight a particular image and press the  
key to view the photos.  
4. Press the  
My Journal  
key to exit t-zones and return to the Idle screen.  
Use a web browser to make notes in My Journal, your online diary and Weblog.  
Keep it private to store your personal memories and send email invitations to ask  
people to view and comment on your album. See your service provider for more  
Note: When making notes on My Journal, charges may apply.  
115  
   
Files  
Downloaded images  
This menu allows you to access your downloaded images.  
Scroll to the image you want to view and press the Options soft key to  
access the following options:  
Download new: opens your web browser where you can download new  
images.  
View: displays the image.  
Send via: allows you to send an image via a Picture message.  
Set as: allows you to set the image as Wallpaper or as a Caller ID.  
Delete: allows you to delete the selected image or multiple images.  
Move to memory card: moves the selected image or multiple images to the  
memory card.  
Copy to memory card: copies the selected image or multiple images to the  
memory card.  
Rename: allows you to change the name of the image.  
Display mode: allows you to set the display mode to Line view or Thumbnail  
view.  
Slide show: allows you to set the time for the slide show to cycle through the  
images. Choose 1 second or 3 seconds.  
Lock/Unlock: allows you to lock the image to protect it from deletion, or unlock  
an already locked image.  
Properties: displays the image name, date, format, resolution, size, quality,  
and Lock/Unlock status.  
Videos  
In this menu, you can view a list of videos downloaded from the web server, received  
in multimedia messages, or recorded via the phone. The following options are  
available:  
Downloaded videos  
This menu allows you to access your downloaded video clips.  
Scroll to the video you want to view. By pressing the Options soft key you can  
access the following options:  
Play: plays the video.  
Send to My Album: allows you to send the selected video to My Album.  
Send via: allows you to send the video via Picture message or Bluetooth.  
Delete: allows you to delete the Selected video clip or to delete Multiple video  
clips.  
Default destination: allows you to remove or change the default destination.  
Fun & Apps 116  
 
Move to memory card: allows you to move the video to the microSD memory  
card.  
Copy to memory card: allows you to copy the video to the microSD memory card.  
Rename: allows you to change the name of the video.  
Display mode: allows you to see your videos displayed in a Line view or in  
Thumbnail view.  
Lock/Unlock: allows you to lock the video to protect it from deletion, or unlock an  
already locked video.  
Properties: displays the video Name, Date, Format, Size, Resolution, Length,  
Quality and Lock/Unlock status.  
Videos  
In this menu you can review the videos you’ve taken. Highlight a video and press the  
Options soft key to choose from the following options:  
Play: plays the video.  
Send to My Album: allows you to send the selected video to My Album.  
Send via: allows you to send the video via Picture message.  
Delete: allows you to delete the selected video or delete Multiple videos.  
Default destination: allows you to remove or change the default destination.  
Move to memory card: allows you to move the video to the microSD memory  
card.  
Copy to memory card: allows you to copy the video to the microSD memory card.  
Rename: allows you to change the name of the video.  
Display mode: allows you to see your videos displayed in a Line view or in  
Thumbnail view.  
Lock/Unlock: allows you to lock the video to protect it from deletion, or unlock an  
already locked video.  
Properties: displays the video Name, Date, Format, Size, Length, Quality,  
Resolution and Lock/Unlock status.  
Music  
This options allows you to access your audio files in either your Music list or from  
your Memory card.  
1. Press the Up or Down navigation keys to scroll between the Music or  
Memory card options and press the Select soft key or the  
key.  
117  
 
Files  
The Memory card option appears only if a microSD card has been previously  
installed into the internal slot below the battery. For more information, refer to  
To be accessible Music must be stored into the Music folder on the memory card  
2. Highlight the Music folder and press the  
key.  
3. Highlight a music file and press the Options soft key to choose from the  
following options:  
Play: allows you to play the selected audio file on the phone.  
Set as: allows you to set the selected audio as a default Ringtone, Caller  
ringtone, or Alarm tone.  
Delete: allows you to delete either the selected audio file or multiple files.  
Move to memory card: moves the selected audio file to the memory card.  
Copy to memory card: copies the selected audio file to the memory card.  
Rename: allows you to rename the selected audio file.  
Lock/Unlock: allows you to lock the audio file to protect it from deletion, or  
unlock an already locked audio file.  
Properties: displays the Name, Date, Format, Bit rate, Length, Size, and Lock/  
Unlock status of the selected music file.  
Other files  
This option allows you to view other types of files that you have stored on your  
phone. This includes Excel spreadsheets, text files, wmf files, PowerPoint  
presentations, PDFs, MHTML and Word documents. You can send these files by  
picture message. You can also move or copy the files to your memory card.  
Memory card  
You can check the contents of your microSD memory card and see what was saved  
there.  
1. Press the Up or Down navigation keys to scroll between Images, Videos,  
Music, Sounds, and Other files.  
Note: The Memory card option only displays if a microSD memory card was pre-inserted in your phone.  
2. After selecting a folder, press the Options soft key for the following  
options:  
Open: allows you to open the folder so you can access its contents.  
Create folder: allows you to create a new folder.  
Properties: lists the Name, Size, Contains, Created Time, and Last modified  
time.  
Fun & Apps 118  
   
Memory card info.: allows you to view the settings for Maximum memory  
capacity, Used memory space, and Free memory space.  
Caution!: Pressing the  
key while viewing this option prompts “Formatting will erase all data.  
Continue?” and if confirmed, reformats the memory card and erases all data on the card.  
For more information on downloading files from your PC to your Memory card,  
contact your service provider.  
Memory Status  
You can check the amount of memory being used and memory remaining for sounds  
and images.  
Press the Left or Right navigation keys to scroll between the memory  
status of Fun & Apps, Sounds, Images, Videos, Music, JAVA, and Other  
files.  
Games  
You can download MIDlets (Java applications that run on mobile phones) from  
various sources using t-zones browser and then store them in the My Games folder.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select  
soft key or the  
key to enter the menu.  
3. Highlight the Games option and press the Select soft key or the  
key.  
When you access the Games menu, the list of default games displays. Once you  
download new games, they are then added to the list.  
Creating a New Games Folder  
When you download a game using t-zones the file automatically stores in the My  
Games folder, however, you can organize and categorize your games by creating  
new folders for each game type and then moving the games into those folders.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select  
soft key or the  
key to enter the menu.  
3. Highlight the Games option and press the Select soft key or the  
4. Highlight My Games and press the Options soft key.  
5. Highlight the Add option and press the Select soft key or the  
6. Enter a folder name in the text field.  
key.  
key.  
119  
     
Games  
7. When finished, press the Options soft key and select the OK option then  
press the Select soft key or the key.  
The new folder is added to the Games menu.  
8. Move the game into the new folder. For more information, refer to "Moving  
Moving a Game into a New Games Folder  
Once you have created a new Games folder you can move your games into the  
folders. This option allows you to organize your games by time or other criteria.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select  
soft key or the  
3. Highlight the Games option and press the Select soft key or the  
Browse Games  
key to enter the menu.  
key.  
You can download more games from the T-Mobile website by using the Browse  
Games option.  
Highlight the Browse Games option and press the Connect soft key or the  
key. The t-zones screen displays with options.  
Note: When downloading games, charges may apply. MIDlet game options differ depending on the MIDlet  
selected.  
Browse games  
You can download more games from the website preset by your service provider  
using the Browse games option.  
Note: Charges may apply when downloading games. For more information, contact your service provider.  
Fun & Apps 120  
 
My games  
This folder contains the default downloaded games and any other games you  
downloaded. After selecting a game, press the Options soft key for the following  
options:  
Note: Some options are greyed out and not editable (Move to, Delete, and Unlock).  
Start: launches the application.  
Details: displays some of the game development information such as: name,  
supplier/vendor, software version, file size, etc...  
Lock/Unlock: allows you to lock the game to protect it from being used.  
Move to: allows you to move the selected game to another user-created folder.  
Delete: allows you to delete the game from this folder.  
Memory status: displays the memory status such as: total available memory,  
Used memory, game allocation, and folder memory used.  
Music Player  
For information on using your music player, see "Music Player" on page 139.  
Camera  
For information on using your camera, see "Camera" on page 147.  
Voice Commands  
Voice Commands is an advanced speech recognition software used to activate a  
wide-variety of functions on your phone. Voice Commands software automatically  
voice activates (up to 200 contacts) for voice dialing and searching. No  
pre-recording or training needed. Speak a contact name naturally to dial, and use  
your voice to look up contacts, launch applications and navigate phone menus.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Select Fun & Apps and press the Select soft key or the  
key.  
3. Highlight Voice recognition and press the Select soft key or the  
key.  
4. At the voice prompt, say a command. The list of available commands is  
listed below.  
Note: A list of voice commands briefly displays.  
121  
           
Voice Commands  
Voice Recognition Commands  
Call <Name or #>: dials a name from your contact list, or dials a number, even if  
the number is not stored in the contact list. For more information, refer to  
"Contacts List Voice Activation" on page 122.  
Send Text <Name>: displays the Create Text Message screen. For more  
Lookup <Name>: allows you use a voice command to locate and display contact  
information stored in the Contacts list. For more information, refer to "Using  
Go to <App>: accesses the Phonebook, Voice notes, Text messages, Picture  
message, Call records, t-zones, Calendar, Instant message, and Camera features  
of your phone.  
Check <Item>: Lets you check your phone's status (that is signal strength, and  
battery in the same report), battery, signal strength, battery, and My phone  
number.  
Speak clearly when giving your command. If, after a few seconds, the handset does  
not recognize your command, a voice prompt asks you to repeat the command. If the  
software does not recognize your command the following message displays “Sorry,  
no match found,” and voice recognition turns off.  
Important!: You must end your current VoiceSignal call before you can make another call.  
Voice Recognition Tips  
Wait for the tone before you speak.  
Speak clearly and at a normal volume.  
Contacts List Voice Activation  
On startup VoiceSignal reads your Contacts list and voice-activates all the names.  
When you have add or change contacts, VoiceSignal automatically reloads and  
voice-activates the list when you add or modify a contact.  
Fun & Apps 122  
 
Call Digit Dialing  
Digit Dial allows you to dial any phone number by simply speaking the digits into the  
phone. No training is necessary, and Digit Dial is programmed to understand natural  
speech.  
1. Access VoiceSignal by doing one of the following:  
Press and hold the  
key.  
Press and hold the Multi-Function button on a plug-in headset or a Bluetooth  
headset.  
In the Fun & Apps menu, select Voice recognition and press the Select  
soft key or the  
key.  
After a brief pause, a list of optional commands displays on the screen (and  
the “Say a command” message displays on the external screen) and the  
audio prompt “Say a command” plays through the earpiece.  
2. To use Digit Dialing, say “Call” and say the area code and number that you  
want to dial at a distance of 3-12 inches from the phone in a natural voice.  
3. The number that you said is repeated through the earpiece and your phone  
dials the number.  
4. If VoiceSignal is not sure of the number that you said, a list of possible  
matches displays on the screen.  
5. You’re asked to confirm the correct number as VoiceSignal displays the  
results. Say “Yes” or “No” to confirm or reject the number when  
prompted.  
Call Name Dialing  
To use Name Dial, you’ll need to have entries stored in your Phonebook. For  
information on creating Phonebook entries, see "Understanding Your Phonebook"  
1. Access VoiceSignal by doing one of the following:  
Press and hold the  
key.  
Press and hold the Multi-Function button on a plug-in headset or a Bluetooth  
headset.  
In the Fun & Apps menu, select Voice recognition and press the Select  
soft key or the  
key.  
After a brief pause, a list of optional commands displays on the screen (and  
the “Say a command” message displays on the external screen) and the  
audio prompt “Say a command” plays through the earpiece.  
123  
   
Voice Commands  
2. To use Name Dialing, say “Call” and the name of the contact that you want  
to dial.  
3. The name that you said is repeated through the earpiece and your phone  
dials the number.  
4. If VoiceSignal is not sure of the name that you said, a list of possible  
matches displays on the screen.  
5. You’re asked to confirm the correct number as VoiceSignal displays the  
results. Say “Yes” or “No” to confirm or reject the number when  
prompted.  
6. The location is repeated through the earpiece and your phone dials the  
number.  
Send Text Message  
1. Access VoiceSignal by doing one of the following:  
Press and hold the  
key.  
Press and hold the Multi-Function button on a plug-in headset or a Bluetooth  
headset.  
In the Fun & Apps menu, select Voice recognition and press the Select  
soft key or the  
key.  
2. After a brief pause, a list of optional commands displays on the screen (and  
the “Say a command” message displays on the external screen) and the  
audio prompt “Say a command” plays through the earpiece.  
3. Say “Send Text” at a distance of 3-12 inches from the microphone. “Say  
the Name or Number” plays through the earpiece.  
4. After you say a name or number, you might be prompted, “Did you say?”  
To confirm a name or number, wait for the beep and then say “Yes.”  
5. You can also choose the correct name or number from the choice list using  
the phone’s arrow keys.  
6. When the Text Message client launches, enter your text message.  
Fun & Apps 124  
 
Name Lookup  
To perform a name lookup, you’ll need to have some entries in your Contact list.  
1. Access VoiceSignal by doing one of the following:  
Press and hold the  
key.  
Press and hold the Multi-Function button on a plug-in headset or a Bluetooth  
headset.  
In the Fun & Apps menu, select Voice recognition and press the Select  
soft key or the  
key.  
After a brief pause, a list of optional commands displays on the screen (and  
the “Say a command” message displays on the external screen) and the  
audio prompt “Say a command” plays through the earpiece.  
2. Say “Lookup” at a distance of 3-12 inches from the microphone. “Say the  
name” plays through the earpiece.  
3. Say the name exactly as it displays in your Contact list, first name followed  
by last name.  
4. The contact name displays on the screen with other information that  
you’ve entered for that contact.  
Opening Applications  
You can open an application or access a menu on your phone using VoiceSignal.  
1. Access VoiceSignal by doing one of the following:  
Press and hold the  
key.  
Press and hold the Multi-Function button on a plug-in headset or a Bluetooth  
headset.  
In the Fun & Apps menu, select Voice commands and press the Select  
soft key or the  
key.  
After a brief pause, a list of optional commands displays on the screen (and  
the “Say a command” message displays on the external screen) and the  
audio prompt “Say a command” plays through the earpiece.  
2. Say “Go To” at a distance of 3-12 inches from the microphone. A list of  
options displays and a prompt of “Please choose” plays through the  
earpiece. If the option you desire is not listed, say “Next Menu” to scroll to  
the next page.  
3. The spoken application menu option is then activated.  
125  
   
Voice Commands  
Checking Phone Status  
Use the Check command to see and hear status information from your phone,  
including its phone status, battery level, current signal strength, phone number.  
To check phone status:  
1. Access VoiceSignal by doing one of the following:  
Press and hold the  
key.  
Press and hold the Multi-Function button on a plug-in headset or a Bluetooth  
headset.  
In the Fun & Apps menu, select Voice recognition and press the Select  
soft key or the  
key.  
After a brief pause, a list of optional commands displays on the screen (and  
the “Say a command” message displays on the external screen) and the  
audio prompt “Say a command” plays through the earpiece.  
2. Say “Check” at a distance of 3-12 inches from the microphone. A list of  
options displays and a prompt of “Please choose” plays through the  
earpiece.  
3. The spoken phone status menu option is then displayed.  
Voice Recognition Settings  
Choice lists  
VoiceSignal uses choice lists when a name or number is not clearly recognized. The  
software displays three choices and prompts you to select a choice.  
You can modify the way VoiceSignal uses the choice lists in the settings. Each time  
VoiceSignal activates you can choose to view the choice list even if there is only one  
choice. Additionally, you can choose never to view a choice list, even if there are  
multiple choices. When the name or number you speak is not recognized, the  
Automatic setting displays the choice list.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Select Fun & Apps and press the Select soft key or the  
key.  
3. Highlight Voice recognition and press the Select soft key or the  
key.  
Fun & Apps 126  
   
4. At the voice prompt, press the Settings soft key and select one of the  
following:  
Choice lists  
-
-
-
Automatic: VoiceSignal displays a choice list only when it is not sure if it has  
correctly recognized the name or number.  
Always On: VoiceSignal always displays a choice list, even when there is only  
one choice.  
Always Off: VoiceSignal never displays a choice list.  
5. Press the OK soft key or the  
Sensitivity  
key to confirm the selection.  
This option allows you to adjust the sensitivity monitoring of voice tones.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Select Fun & Apps and press the Select soft key or the  
key.  
3. Highlight Voice recognition and press the Select soft key or the  
key.  
4. At the voice prompt, press the Settings soft key, select Sensitivity and  
press the Select soft key or the key.  
5. Use the Up or Down Navigation keys to adjust the selected Sensitivity  
setting to Reject More spoken commands or names or to Reject Less  
spoken commands or names.  
6. Press the OK soft key or the  
Digit dialing  
key to accept the new setting.  
If VoiceSignal frequently does not recognize your commands, adapting digit dialing  
to your voice improves the accuracy of digit recognition.  
After you adapt Digit Dial, your phone recognizes only your voice. Other users are not  
able to use the handset with VoiceSignal unless the handset is reset to factory  
defaults.  
Adapting requires recording multiple sequences of digits. The entire adaptation  
process takes approximately one minute.  
Select location  
This option allows you to identify the country or region where you are using the  
handset.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Select Fun & Apps and press the Select soft key or the  
key.  
3. Highlight Voice recognition and press the Select soft key or the  
key.  
127  
Voice Commands  
4. At the voice prompt, press the Settings soft key, select Digit dialing and  
press the Select soft key or the  
5. Highlight Select location and press the Select soft key or the  
6. Use the Up or Down Navigation keys to select your current location.  
7. Press the OK soft key or the key to accept the new setting.  
Adapt Digits  
To adapt digits perform the following:  
key.  
key.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Select Fun & Apps and press the Select soft key or the  
key.  
3. Highlight Voice recognition and press the Select soft key or the  
4. At the voice prompt, press the Settings soft key, select Digit dialing and  
press the Select soft key or the key.  
key.  
5. Highlight Adapt digits and press the Select soft key or the  
key.  
6. Press the Back soft key or the key to return to Idle mode.  
Note: To reset digit dialing to factory default settings, see "Reset settings" on page 118.  
Adapting Digit Dialing Tips  
Select a quiet location when using the Adapt Digits feature.  
Wait for the beep (tone) before you begin speaking.  
Say each digit with a clear tone.  
Re-record the sequence if you make a mistake or if there is noise interference.  
Adapt digits only if you regularly experience issues with digit dialing.  
Reset digits  
To reset digits perform the following:  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Select Fun & Apps and press the Select soft key or the  
3. Highlight Voice recognition and press the Select soft key or the  
4. At the voice prompt, press the Settings soft key, select Digit dialing and  
press the Select soft key or the key.  
5. Highlight Reset digits and press the Select soft key or the  
key.  
key.  
key.  
Fun & Apps 128  
Sound  
This options allows you to determine which text, names or numbers are spoken  
through the speaker or headset.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Select Fun & Apps and press the Select soft key or the  
3. Highlight Voice recognition and press the Select soft key or the  
4. At the voice prompt, press the Settings soft key, select Sound and press  
the Select soft key or the key.  
5. Select one of the following options:  
key.  
key.  
Prompts: allows you to turn audio prompts On or Off.  
Digits: allows you to turn audio digit playback On or Off.  
Names: allows you to turn audio name playback On or Off.  
Name settings: Lets you adjust the speed and volume of your phone’s audio  
name playback.  
Speakerphone: allows you to turn voice recognition through the  
speakerphone On or Off.  
6. Use the navigation keys to highlight the desired setting.  
7. Press the OK soft key, Select key or key to accept the new setting.  
About  
This options allows provides you with information about the Voicesignal application.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Select Fun & Apps and press the Select soft key or the  
3. Highlight Voice recognition and press the Select soft key or the  
4. At the voice prompt, press the Settings soft key, select About and press  
the Select soft key or the key.  
Organizer  
key.  
key.  
The Organizer allows you to set alarms, view the calendar, create Tasks, perform  
simple math calculations, check world time, perform synchronization, perform unit  
conversions, compose notes, set a timer, use a tip calculator, and use a stopwatch.  
Alarm  
This feature allows you to:  
Set up to 3 alarms to ring at specified times.  
Set the phone to switch on automatically and ring the alarm even if the phone is  
switched off.  
129  
       
Organizer  
The following options are available:  
Wake-up alarm: the alarm rings to wake you up in the morning.  
Alarm 1: set the day, time, and tone for this alarm.  
Alarm 2: set the day, time, and tone for this alarm.  
Auto power-up: alarm rings at the specified time even if the phone is turned off.  
If the option is set to Off and the phone is switched off at the specified time, the  
alarm does not ring.  
To set the alarm:  
1. Highlight an alarm and press the Select soft key or the  
key.  
2. Highlight the Alarm option and press the Right navigation key to set Alarm  
to On.  
3. Press the Down key to highlight the Alarm time option. Enter the time you  
want the Alarm to sound.  
4. Press the Down key to highlight the AM/PM option. Press the Left or Right  
navigation key to set to AM or PM.  
5. Press the Down key to highlight the Monday-Sunday checkboxes. Press  
the  
6. Place a checkmark next to the days you want the alarm to sound. To place  
or remove a check mark, press the key. Press the OK soft key.  
key to bring up a list of days.  
7. Press the Down key to highlight the Alarm tone option. Press the  
key  
to bring up a list of alarm melodies.  
8. Press the Up or Down Navigation key to highlight a default alarm melody.  
Or, press the Right navigation key to display a list of sounds that you may  
choose from.  
9. Press the Save soft key.  
10. Press the  
key to return to Idle mode.  
Note: Your phone is preset to a 12-hour format. To change the time format, see "Time & Date" on page 93.  
11. To stop the alarm when it rings, press any key or press the Snooze soft  
key.  
Fun & Apps 130  
Calendar  
With the Calendar feature, you can:  
Consult the calendar by month, week, or day.  
Set schedules and note anniversaries  
Create a miscellaneous event.  
Create tasks.  
Set an alarm to act as a reminder, if necessary.  
Check your memory status.  
When you select the Calendar menu, the following options are available:  
Month view  
When you select this option, the calendar displays the selected month with today’s  
date highlighted.  
At the bottom of the calendar, the following icons display along with the number of  
entries for each:  
Schedule items  
Anniversary events  
Tasks  
Miscellaneous items  
The number of entries next to each icon reflects the number of entries for the  
selected day on the calendar.  
The following options are available when you press the Options soft key:  
View mode: takes you to the Day view or Week view of the selected day.  
Create: allows you to create a Schedule, Anniversary, or Miscellaneous.  
Go to: takes you to the Today’s date or another date highlighted.  
Delete: allows you to delete all events for a selected date, delete all events for a  
specified period, or delete all events for this month dates. You can also delete all  
event.  
131  
 
Organizer  
Week view  
When you select this option, the calendar displays the selected week with today’s  
date and time highlighted.  
The following options are available when you press the Options soft key:  
View mode: takes you to the Day view or Month view of the selected day.  
Create: allows you to create a Schedule, Anniversary, or Miscellaneous.  
Go to: takes you to today’s date or another date highlighted.  
Delete: allows you to delete all events for a selected date, delete all events for a  
specified period, or delete all events for this weeks dates. You can also delete all  
events.  
Day view  
When you select this option, you are taken to the Day view of the selected day with  
any events listed. The following options are available when you press the Options  
soft key:  
- View: takes you to the Day view of the selected day.  
- Create: allows you to create a Schedule, Anniversary, or Miscellaneous.  
- Send via: allows you to send this event via a Text message or Picture message.  
- View mode: allows you to choose between Month view or Week view.  
- Delete: allows you to delete all events for a selected date, or delete all events for  
this days’ dates. You can also delete all events.  
Schedule  
This option allows you to write memos to a schedule.  
1. Highlight the Schedule option and press the Select soft key or the  
key.  
2. Press the Options soft key.  
3. Highlight the Create option and press the Select soft key or the  
key.  
4. Enter the subject in the Subject text box then press the Down soft key.  
5. Continue to enter other information including Details, Start date, Start time,  
AM/PM, End date, End time, AM/PM, Location, Alarm, before, Alarm tone  
and Repeat.  
6. Press the OK soft key to check the Repeat option.  
7. Press the Save soft key when you are finished. Your Schedule information  
saves to the Calendar.  
Fun & Apps 132  
Anniversary  
This option allows you to record Anniversaries in your calendar. You can also set an  
alarm to remind you of important anniversaries.  
1. Highlight the Anniversary option and press the Select soft key or the  
key.  
2. Press the Options soft key.  
3. Highlight the Create option and press the Select soft key or the  
key.  
4. Enter the occasion in the Occasion text box then press the Down soft key.  
5. Continue to enter other information including Date, Alarm, before, Alarm  
time, AM/PM, Alarm tone, and Repeat every year.  
6. Press the Save soft key when you are finished. Your Anniversary  
information saves to the Calendar.  
Miscellaneous  
This option allows you to record miscellaneous dates or events in your calendar.  
1. Highlight the Miscellaneous option and press the Select soft key or the  
key.  
2. Press the Options soft key.  
3. Highlight the Create option and press the Select soft key or the  
key.  
4. Enter the subject in the Subject text box then press the Down soft key.  
5. Continue to enter other information including Details, Start date, Start time,  
AM/PM, End date, End time, and AM/PM.  
6. Press the Save soft key when you are finished. Your Miscellaneous  
information saves to the Calendar.  
Missed alarm events  
You can check on all of the alarmed events.  
1. Highlight the Missed alarm events option and press the Select soft key or  
the  
key.  
2. To view an event information, highlight an event and press the  
key.  
The missed alarm event information displays.  
3. To acknowledge and remove the event, press the Confirm soft key or the  
key. The event is removed from the Missed alarm events menu.  
133  
Organizer  
Memory status  
This menu item shows the number of calendar events that are stored on the handset  
as well as how much available memory space is left for additional calendar events.  
Events are broken down by Schedule, Anniversary, Miscellaneous, and Tasks.  
Tasks  
This feature allows you to enter a list of tasks.  
1. Highlight the Tasks option and press the Select soft key or the  
2. Press the Options soft key.  
key.  
key.  
3. Highlight the Create option and press the Select soft key or the  
4. Enter the Item to do in the Task text box then press the Down soft key.  
5. Continue to enter other information including Start date, Due date, Priority,  
and Alarm.  
6. Press the Save soft key when you are finished. Your Task list saves to the  
Calendar.  
Editing the Tasks List  
When you select the Tasks list menu, the current contents display with a status  
checkbox and a priority marker.  
If the item was done, a check displays in the checkbox.  
High priority items display a red explanation mark, Normal priority items display a  
blue explanation mark, and Low priority items display a gray explanation mark.  
1. To mark an item Done, highlight the item and press the  
key.  
2. Press the Options soft key.  
3. Highlight the Done option and press the Select soft key or the  
key.  
The status checkbox next to the Task item displays a check mark.  
4. Highlight the item and press the  
key to edit other fields in the Task  
item.  
5. Press the Options soft key.  
6. Highlight the Edit option and press the Select soft key or the  
7. Edit the items you wish to change.  
key.  
8. Press the Options soft key.  
9. Highlight the Save option and press the Select soft key or the  
key.  
Fun & Apps 134  
 
Notes  
This feature allows you to create a note.  
1. Highlight the Notes option and press the Select soft key or the  
2. Press the Options soft key.  
key.  
key.  
3. Highlight the Create option and press the Select soft key or the  
4. Enter the note text into the text box then press the Down soft key.  
5. Press the Options soft key and select the Save option.  
6. Press the Select soft key or the  
Calculator  
key when you are finished.  
With this feature, you can use the phone as a calculator. The calculator provides the  
basic arithmetic functions; addition, subtraction, multiplication, and division.  
1. Enter the first number using the numeric keys.  
2. Enter the operation for your calculation by pressing the navigation key  
according to the illustration on the display. Use the  
key for the  
decimal. You can also use the  
key to create brackets.  
3. Enter the next number.  
4. To view the result, press the  
key.  
5. Repeat steps 1 to 4 as many times as required.  
Tip calculator  
This feature provides the percentage amount for tip. Use the following procedures to  
calculate a tip amount.  
1. Highlight Tip calculator and press the Select soft key or the  
key.  
2. In the Bill field, enter the check amount.  
Note: To enter the decimal point for the exact dollar amount, use the  
key.  
3. Use the Down Navigation key to highlight Tip(%) percentage. 15 is the  
default value but this can be changed.  
4. The Tip($) field value is calculated according to the values entered.  
5. Use the Down Navigation key to move to the # paying field to change the  
number of people contributing to the tip amount.  
6. The You pay field displays what each individual is to pay.  
135  
     
Synchronization  
World Time  
This feature allows you to assign two separate time zones to your phone by using  
the Left and Right Navigation keys. You can set the first setting to your home city  
and then use the second setting to check other city times.  
1. Highlight the first field using your Up and Down Navigation keys.  
2. Use your Left and Right Navigation keys to then assign the time zone for  
that time zone.  
3. Repeat steps 1 & 2 for the next time zone entry.  
4. Press the Options soft key for the following options:  
Save: this allows you to save your world time settings.  
Apply daylight saving time: use the  
key to place a checkmark next to  
the cities that you want to set daylight savings time. Each city listed represents a  
time zone.  
Synchronization  
This feature allows you to back up (synchronize) Contact information, Calendar, and  
Tasks stored on your phone with your T-Mobile account on the network. Each time  
you edit contact information your phone automatically synchronizes with the web  
Address Book.  
Important!: Synchronization is a free service offered to T-Mobile customers.  
Sync Now  
Data to Sync  
Viewing the synchronization log  
Fun & Apps 136  
     
About Sync  
This feature displays information about how the synchronization feature works and  
provides a URL for more specific synchronization information.  
Note: Your t-zones feature must be activated by T-Mobile for this feature to work.  
Unit Conversion  
The conversion menu provides the following conversion categories:  
- Currency  
- Length  
- Weight  
- Volume  
- Area  
- Temperature  
To convert a currency, length, weight, volume, area, or temperature, do the  
following:  
1. Scroll to the conversion feature you wish to use and press the Select soft  
key or the  
key.  
2. Enter the quantity you want converted.  
Note: To include a decimal point, press the  
key.  
3. Use the Navigation keys to select the From and To units of measure for the  
quantity you want converted.  
4. Press the Options soft key and select the function to perform with the  
information entered in the From and To units of measure.  
5. Press the Back soft key to return to the Unit conversion menu.  
Timer  
You can use this menu to set a timer. To enable the Timer, use the following options:  
1. Press the Set soft key to enter the length of time.  
2. Enter the time and press the OK soft key.  
3. Press the  
key to start the timer. Press the  
key again to stop the  
timer.  
137  
   
Synchronization  
Stopwatch  
This feature allows you to use a stopwatch.  
1. Press the  
key to start the stopwatch.  
2. Press the Reset soft key to erase all previously recorded stopwatch times.  
3. Press the  
key for the lap time. You can use up to 4 separate lap times.  
Fun & Apps 138  
 
Section 11: Music Player  
Topics Covered  
This section describes how to use the Music Player to play downloaded music files.  
There are also instructions on how to use the Music Setup Wizard.  
Music Player  
The Music Player allows you to play music files stored on the phone.  
Note: Note: The following characters cannot be used in the filename:  
< > “ ? / \ : * |  
Music Player Options  
Use the Options menu to access the Playlist. The Playlist soft key (Up Navigation key)  
allows you to change the settings such as repeat or shuffle.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select  
soft key or the  
key to enter the menu.  
3. Highlight the Music player option and press the Select soft key or the  
key.  
4. Press the Options soft key and select one of the following music player  
application options then press the  
key.  
Add music from: allows you to add music from either your phone or inserted  
memory card. The memory card should contain a Music folder to house the  
desired music files.  
139  
           
Player Settings  
Open playlist: allows you to display either your current playlist or a user-  
Settings: allows you to configure the media player settings. For more  
Shortcuts: displays the music player shotcuts. For more information, refer to  
Player Settings  
The Player settings menu configures your phone’s music playing options such as  
Repeat mode, Shuffle, or Visualization. Settings for the Music menu determine the  
order in which music is presented for the selected music category.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select  
soft key or the  
key to enter the menu.  
3. Highlight the Music player option and press the Select soft key or the  
key.  
4. Press the Options soft key, select Settings, then press either the Select  
soft key or the  
key.  
5. Highlight the Visualization option and then use the Right Navigation key  
to cycle through the available music player background visual effects:  
Type 1 or Type 2.  
6. Highlight the Volume option and then use the Right Navigation key to  
choose a playback volume level.  
7. Press the Save soft key to store the category selections and return to the  
previous Settings menu.  
Music Player 140  
   
Music Player Shortcut Keys  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select  
soft key or the  
key to enter the menu.  
3. Highlight the Music player option and press the Select soft key or the  
key.  
4. Press the Options soft key, select Shortcuts, then press either the Select  
soft key or the  
key.  
Press to increase the volume  
Press to decrease the volume  
Up allows you to change the settings such as repeat or shuffle.  
Down stops the currently playing song.  
Left plays the previous song title.  
Right Advances to the next song title.  
While playing a song if pressed it displays the music player  
options.  
While playing a song if pressed it displays the Fun and Apps  
menu.  
Press once to toggle the play state of the current song  
(Play/Pause).  
Cycles through the available music player background visual  
effects: Type 1 or Type 2.  
Toggles through the Repeat mode:  
Repeat one: repeats the currently active song.  
Repeat all: replays each song in the current list and as the  
last song in the list ends, the player begins replaying all of  
the songs in the order the appear within the current list.  
141  
   
Adding Music to a Playlist  
Toggles the Shuffle mode On or Off.  
Shuffle: the current list of songs are randomly shuffled for  
playback.  
Adding Music to a Playlist  
Before music can be played directly via the Music Player, it is necessary that the  
desired playlist be active before music is added. Unless otherwise selected,  
Playlist 1 is the default playlist when new music is added from either the phone or  
memory card.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select  
soft key or the  
key to enter the menu.  
3. Highlight the Music player option and press the Select soft key or the  
key.  
4. Press the Options soft key, highlight Open playlist, and press the Right  
Navigation key.  
5. Select either Current playlist (to add songs to the default playlist -  
Playlist 1) or My playlist (to select from the list of available playlists).  
If you selected one of the other available playlist, press the Options soft key,  
highlight Open and press the Select soft key or the key.  
6. Press the Options soft key, highlight Add music from, and press the Right  
Navigation key.  
7. Select either Phone or Memory card (to songs stored in the Music folder)  
and press the Select soft key or the  
key.  
All supported music files are then displayed in a list.  
8. Select the songs you wish to add to your currently selected playlist by  
using the Up or Down Navigation keys to highlight the song and then  
pressing the or songs you want to add to an existing playlist.  
9. Press the  
key to place a checkmark alongside the songs you wish to  
add or highlight and select the All option.  
10. Press the Add soft key to associate all of the selected songs to the  
currently active playlist.  
Music Player 142  
   
Playing Music Files  
Music can either be played indirectly (without the use of the Media player or  
playlists) by using the Fun & Apps > Files > Music feature (page 117) or directly by  
selecting a desired playlist of songs which are then played through the media player.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select  
soft key or the  
key to enter the menu.  
3. Highlight the Music player option and press the Select soft key or the  
key.  
4. Press the Options soft key and select the Open playlist option. The  
current playlist information displays.  
5. Press the Left and Right Navigation keys to access the desired playlist.  
6. Press the Up or Down navigation keys to highlight the song to which you  
want to listen, and press the  
key to begin playing the selected song.  
Note: The Navigation keys can be used to play, pause, stop, and select either the next or previous songs  
from the current list.  
7. While listening to a music file, press the Options soft key for the following  
options:  
Pause: allows you to pause the song you are listening to. Press the  
to  
resume the song.  
Open playlist: allows you to display either the current playlist or select from one  
of the remaining three playlists (four total).  
Remove from playlist: allows you to remove the actively playing song from the  
current playlist.  
Settings: allows you to configure the media player settings.  
Properties: displays the file properties such as: file name, creation date,  
format, bitrate, length, file size, and lock/unlock state.  
Shortcuts: displays the current shortcut key functions related to the media  
player application.  
143  
   
Transferring Music Files  
Transferring Music Files  
Music files can be downloaded to the phone via one of two methods:  
Downloaded to the phone from t-zones > Downloads.  
-
Music files can be directly stored on your phone from this site.  
-
Downloaded to the phone via a direct USB connection.  
-
Music files are stored into a Music folder on the microSD card.  
-
Deleting Music Files From the Memory Card  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select  
soft key or the  
key to enter the menu.  
3. Highlight the Files option and press the Select soft key or the  
key.  
4. Highlight the Memory card option and press the Select soft key or the  
key.  
5. Press the Up or Down navigation keys to highlight the Music folder which  
contains the songs you want to delete and press the  
key.  
6. Press the Up or Down navigation keys to highlight the song to delete.  
7. Press the Options soft key, highlight Delete, and press the Right  
Navigation key.  
8. Select either Selected (to delete a single song) or Multiple (to delete  
several songs).  
If you selected Multiple, you select a song by first highlighting it and then  
pressing the Delete soft key or the  
key. Selecting All places a checkmark  
next to all detected songs.  
9. At the “Delete?” prompt, press the Yes soft key to accept the deletion or  
the No soft key to cancel the process.  
Music Player 144  
       
Assigning Music Files  
You can choose to assign music files as the Default Ringtone, Caller ringtone or as  
an Alarm tone. Songs used for these types of assignments must be copied to the  
phone.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select  
soft key or the  
key to enter the menu.  
3. Highlight the Files option and press the Select soft key or the  
key.  
key.  
4. Highlight the Music option and press the Select soft key or the  
5. Press the Up or Down navigation keys to scroll between Music or Memory  
card options and press the Select soft key or the key.  
The Memory card option displays only if a microSD card was installed into the  
Music must be stored in the Music folder.  
Is you selected Memory card, you must highlight the Music folder and press the  
key.  
6. Highlight a music file and press the Options soft key.  
7. Highlight the Set as option and then press the Right Navigation key to  
assign the selected song to a ring type.  
Set as: allows you to set the selected audio as a Default Ringtone, Caller  
ringtone, or Alarm tone.  
This type of audio assignment requires the song to be stored on the phone.  
If the selected song is on the memory card, you are prompted to copy the music  
file to the phone prior to use. Press the Yes soft key to continue copying the song  
to the phone or No to cancel the operation.  
Assigning a music file as a ringtone  
1. Follow steps 1 - 6 from the previous section.  
2. Highlight the Set as option and then press the Right Navigation key.  
3. Highlight the Default Ringtone option and press the Select soft key or the  
key.  
4. At the “Copy to phone and set as ringtone?” prompt, press the Yes soft  
key to continue copying the song to the phone or No to cancel the  
operation.  
145  
     
Assigning Music Files  
Assigning a music file as a Caller ringtone  
1. Follow steps 1 - 6 from the previous section.  
2. Highlight the Set as option and then press the Right Navigation key.  
3. Highlight the Caller ringtone option and press the Select soft key or the  
key.  
4. From the Contact list, press the Up and Down Navigation keys to highlight  
a contact entry and press the Select soft key or the  
key to assign the  
song. The selected audio file is assigned to the contact entry as part of  
their Caller ID. When this contact calls you, the associated music file plays.  
Assigning a music file as an alarm tone  
1. Follow steps 1 - 6 from the previous section.  
2. Highlight the Set as option and then press the Right Navigation key.  
3. Highlight the Alarm tone option and press the Select soft key or the  
key.  
4. From the Alarm list, press the Up and Down Navigation keys to highlight an  
alarm entry and press the Select soft key or the  
key to open the  
properties of the alarm.  
5. Press the Save soft key to store the music file to the selected alarm.  
Music Player 146  
   
Section 12: Camera  
Topics Covered  
Thissectionexplainshowtousethecameraonyourphone.Youcantakephotographs  
by using the built-in camera functionality.  
Using the Camera  
Using the camera module in your phone, you can take photos of people or events  
while on the move. Additionally, you can send a link to your My Album online to other  
people, set the picture as a Wallpaper, or as a Caller ID image.  
Note: Do not take photos of people without their permission.  
Do not take photos in places where cameras are not allowed.  
Do not take photos in places where you may interfere with another person’s privacy.  
Take and Send  
Your camera produces photos in JPEG format.  
Note: When you take a photo in direct sunlight or in bright conditions, shadows may appear on the photo.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select  
soft key or the  
key to enter the menu.  
Tip: Press the  
key on the right side of the phone as a shortcut access to the camera module.  
3. Highlight Camera and press the Select soft key or the  
key.  
147  
           
Take and Send  
4. Highlight Take and Send and press the Select soft key or the  
key.  
5. Adjust the image by aiming the camera at the subject.  
6. Prior to taking a picture, press the Options soft key to access the camera  
Tip: You can use the keypad to quickly change the camera options.  
7. Press the  
Send to: My Album Online ? option.  
8. Press the key, which shows as  
or  
key to take the photo. The screen displays the  
on the display before you save  
REC  
or send the photo to a location, to record an audio clip to be attached to the  
photo. Press the Stop soft option key to end the recording.  
9. Once you have completed the audio clip or if you do not want to add an  
audio clip, press the Yes soft key if you want to send the photo to your T-  
Mobile My Album Online service. The phone’s default destination is set to  
My Album. The photo is automatically saved in the Photos folder in the  
phone.  
Note: To change the default destination for your pictures, press the Options soft key when Send to: My  
Album Online? displays on the screen. Highlight the Default destination option and the Change  
option. You can then change your default destination to a Recent recipients, Phonebook, Phone  
number, Email address, My Album, and My Journal.  
10. To send the newly taken photograph, press the Options soft key.  
11. Highlight Send to and press the Select soft key or the  
key.  
12. Select from one of the following destinations by pressing the Up or Down  
Navigation key:  
Recent recipients: allows you to send to one of the recent recipients.  
Phonebook: allows you to select a recipient from the phonebook.  
New recipient: allows you to enter the phone number and e-mail address of a  
new recipient.  
My Album: sends the message to My Album.  
My Journal: sends the message to My Journal.  
13. To return to Capture mode, press the Back soft key.  
14. Press the Options soft key and select Take another.  
15. Press the  
key to take another picture.  
key to return to the Idle mode.  
16. Press the  
Camera 148  
Configuring Picture Options  
After you take a picture, press the  
key to access the photo’s Options menu for  
the current photograph. This list of options differ from the Camera’s main menu  
which allows you to configure options for the camera and not for the picture.  
The following options are available:  
Take another: returns you to camera mode to take another photo.  
Send to: displays the Send to menu and allows you to select a destination for the  
currently taken photograph. This destination can be a single or multiple  
recipient(s) (such as, Recent recipients, Phonebook, Phone number or Email  
address) or to a remote folder such as My Album or My Journal.  
Edit message: allows you to edit the contents of the outgoing picture message  
(such as Subject, Photo, Sound and Text).  
Set as: allows you to use the current photo as an Caller ID or Wallpaper.  
Default destination: allows you to Remove a current destination location or  
Change the current location by establishing a new folder in which to place the  
pictures. Select from the following options: Recent recipients, Phonebook, Phone  
number, Email address, My Album, or My Journal.  
Note: To change the default destination for your pictures, highlight the Default destination option, press  
the Right Navigation key, then select Change.  
Edit Image: allows you to edit the photo. Image editor has the following options:  
- Send via: allows you to send the photo using a Picture Message.  
- New image: allows you to open an existing photo or take another photo.  
- Save as: allows you to save the photo to your default destination and with a default  
name. You may alter the default name.  
- Effects: allows you to edit the photo using the following effects:  
No effects  
Black & White: allows you to save the photo as a black and white image.  
Negative: allows you to save the photo as a reverse image of the photo.  
Sepia; allows you to save the photo with a yellowish brown effect, as if the photo  
were old.  
Emboss: allows you to save the photo as an embossed image.  
Sketch: allows you to save the photo as a sketch.  
- Insert: allows you to insert a frame, an emoticon, or clip art into the photo.  
- Set as: allows you to set the photo as caller ID, or as wallpaper.  
- Undo: allows you to undo any editing done to the photo.  
Delete: allows you to delete the selected photo.  
149  
 
Take and Send  
Rename: allows you to overwrite the currently defaulted photo name.  
Go to photos: takes you to your Photos folder.  
Lock/Unlock: allows you to lock the photo to protect it from deletion, or unlock an  
already locked photo.  
Properties: shows the properties of the current photo such as the Name, Date,  
Format, Resolution, Size, and Lock/Unlock.  
1. To return to the Capture mode, press the Clear  
2. Press the key to return to Idle mode.  
Configuring Camera Options  
key.  
1. In Capture mode (prior to taking a new photo), press the Options soft key  
to use various options for the camera module.  
The following options are available:  
- Record video: allows you to switch to the camcorder mode and shoot video.  
- Shooting mode: allows you to assign what sequence is followed when a photograph  
is taken.  
Single shot: a single picture is taken.  
-
Take and Send: allows you to take a photo and then send it immediately as part  
of a Picture message.  
-
Take and return: allows you to take a photo, store it the My Photos folder, and  
then return to the main camera screen to shoot a new one.  
Multi-shot: multiple pictures are simultaneously taken.  
-
The combination consists of a combination of 6, 9, or 15 pictures taken at either  
a normal or high resolution.  
-
Options include: 6 shots.Normal, 6 shots.High, 9 shots.Normal, 9 shots.High,  
15 shots.Normal, or 15 shots.High.  
Mosaic style: the picture is taken and a mosaic effect is overlaid to produce a  
mosaic style photo.  
- Effects: allows you to change the color tone or apply special effects to the photo.  
Options include: No effects, Black & White, Negative, Sepia, Emboss, Sketch,  
and Aqua.  
- Frames: allows you to overlay from up to 29 different frames atop the photo.  
- Timer: allows you to set a time delay before the camera takes the photo. Select the  
length of delay you want. When you press the  
the photo after the specified time elapses.  
or  
key, the camera takes  
- Default destination: removes or changes the default destination for the selected  
Photo.  
- Go to photos: takes you to your Photos folder.  
- Camera settings: allows you to change the Function and Setup settings.  
Camera 150  
   
Photo settings - refer to the following.  
Set up - refer to the following.  
Camera Shortcuts  
You can change options using your keypad in capture mode. The following short  
cuts are available:  
Up and Down navigation keys zoom in and out.  
Left and Right navigation keys adjust the image brightness.  
Up arrow zooms in or enlarges the view of the photo.  
Down arrow zooms out or decreases the view of the photo.  
toggles between camera and video mode.  
allows you to set the camera size.  
changes the camera Shooting mode.  
changes the color tone or applies a special effect to the image.  
adjusts the white balance setting.  
allows you to select a custom frame border for your photo.  
sets a time delay.  
sets the ISO speed.  
takes you to the Photos menu.  
enlarges the display screen.  
151  
Record video  
Photo Settings  
Size: allows you to set the image size to either: SXGA(1280 x 1024),  
XGA(1024 x 768), SVGA(800 x 600), VGA(640 x 480), QVGA(320 x 240), Mobile(176  
x 220), QCIF(176 x 144).  
Viewfinder mode: allows you to set the view finder to Full screen, Full screen &  
Indicator, Full screen & Guideline, Actual screen.  
Scene program: allows you to set the camera options to record normal or night  
scene.  
Metering exposure: allows you to set how the camera measures or meters the  
light source: Matrix (several positions), Center-weighted, or Spot.  
White balance: allows you to set this option from the following choices: Auto,  
Daylight, Incandescent, Fluorescent, or Cloudy.  
ISO: allows you to set film speed (ISO speed) of the camera from the following  
choices: Automatic, 100, 200, or 400.  
Setup Options  
Shutter sound: allows you to select a tone to play when the camera’s shutter opens  
and closes. Sound selections are Shutter1, Shutter2, and Shutter3.  
Zoom sound: allows you to turn zoom sound On or Off.  
Brightness sound: allows you to turn brightness sound On or Off.  
Default name: allows you to change the default name assigned to your photo.  
Record video  
Tip: When shooting video in direct sunlight or in bright conditions, it is recommended that you provide your  
subject with sufficient light by putting the light source behind you.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select  
soft key or the  
key to enter the menu.  
3. Highlight Camera and press the Select soft key or the  
key.  
key.  
4. Select Record video then press the Select soft key or the  
5. Before filming the video, press the Options soft key to access camcorder  
options (see below).  
6. Adjust the image by aiming the camera at the subject.  
7. Press the  
key to begin shooting video.  
8. Press the Stop soft key to stop the recording.  
Camera 152  
   
-or-  
Press the  
key to stop the recording and save the video file to your  
Videos folder.  
9. Once the file saves, press the  
key to play back your video for review.  
Camcorder Options  
1. Before shooting the video, press the Options soft key to access the  
camcorder options.  
Take picture: toggles from video to camera mode.  
Effects: sets a custom color tone for your video. Choose from the following  
Effects Mode.  
- Options include: No effects, Black & White, Negative, Sepia, Emboss,  
Sketch and Aqua.  
Timer: sets a time delay before the camcorder begins to shoot video.  
-
-
-
-
Off  
3 seconds  
5 seconds  
10 seconds  
Default destination: allows you to Remove or Change where your videos are  
sent after you take them.  
Go to videos: accesses the list of videos stored within the Video folder. Highlight  
a video and press the Options soft key to view the following options for these  
clips:  
-
-
-
-
-
Play: plays the video clip.  
Send to My Album: sends the video to a special folder called My Album.  
Send via: attaches the multimedia file to a picture message.  
Delete: deletes either Selected or Multiple multimedia videos.  
Default destination: allows you to Remove or Change where your videos are  
sent after you take them.  
-
-
Move to: moves either an original Selected or Multiple video file to the Memory  
card.  
Copy to card: copies either Selected or Multiple videos and then sends them  
to the Memory card.  
Note: The Move and Copy features are available when a memory card is inserted.  
-
-
Rename: renames either Selected or Multiple videos.  
View by: displays the available listing of videos in either a Line view or  
Thumbnail view.  
153  
         
Record video  
-
-
Lock/Unlock: allows you to lock the video to protect it from deletion, or unlock  
an already locked video.  
Details: displays the properties of the current video such as Name, Date,  
Format, Resolution, Size, Length, Quality, and Lock/Unlock.  
Camcorder settings: customizes your camcorder settings. Choose from the  
following options:  
-
Recording mode: sets the maximum allowable recording time. Choose  
Limit for message, or Normal.  
-
Size: sets the video size. Choose Sub-QCIF(128x 96), or QCIF(176 x 144)  
when the Recording mode is set to Limit for message. Choose Sub-QCIF(128x  
96), QCIF(176 x 144), or QQVGA(160 x 120) when the Recording mode is set  
to Normal.  
-
-
Audio Record: allows you to choose whether to use audio in your video.  
Choose between On or Off (microphone is muted).  
White balance: sets the white balance for the camcorder. Choose  
Automatic, Daylight, Incandescent, Fluorescent or Cloudy.  
-
-
-
Zoom sound: turns the Zoom sound Off or On.  
Brightness sound: turns the Brightness sound Off or On.  
Default name: allows you to alter the default name for videos.  
Camcorder shortcuts: displays the shortcut keys associated when using the  
camcorder (see page 155).  
2. Press the OK key to return to the picture viewer.  
3. You can use the keypad to quickly change the camera options using the  
camera shortcut keys. For more information on camera shortcut keys, see  
Once the video has been recorded, the following options are available:  
Record another: allows you to record another video.  
Edit message: allows you to edit a picture message to add the video to.  
Delete: allows you to delete the video.  
Rename: allows you to rename the video. When the video is recorded, it is  
automatically saved with a default name.  
Default destination: Allows you to remove or change where your videos are sent  
after shooting them.  
Go to videos: Allows you to move the selected files to the video folder.  
Lock/Unlock: allows you to lock the video to protect it from deletion, or unlock an  
already locked video.  
Properties: allows you to view the properties of the video.  
Camera 154  
   
Camcorder Shortcuts  
Shortcut keys allow you to change options using your keypad, Navigation keys, and  
Volume key in capture mode. The following options are available.  
shoots video.  
Up arrow zooms in on the video.  
Down arrow zooms out on the video.  
Up and Down navigation keys zoom in or out.  
Left and Right navigation keys adjust the image brightness.  
switches the handset between camcorder and camera mode.  
changes the video size.  
changes the recording mode.  
changes the effects used on the video.  
allows you to adjust the white balance.  
within the camcorder mode, this toggles the microphone On/Off  
(mute).  
sets a time delay (Off, 3, 5, or 10 seconds).  
navigates to the My video clips folder.  
155  
   
Photos folder  
Photos folder  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select  
soft key or the key to enter the menu.  
3. Highlight Camera and press the Select soft key or the  
key.  
key.  
4. Select Photos and press the Select soft key or the  
When you access this menu, your phone displays the photos in Line view,  
which shows them as small images. Use the Navigation keys to scroll  
through the photos.  
5. To view the photos on the full screen, highlight an image and press the  
key. To go back to Line view, press the Back soft key or the  
key.  
6. From the list, press the Options soft key to use the following options:  
View: allows you to view the photo on your display.  
Send to My Album: allows you to send the selected photo to your My Album  
folder.  
Send via: allows you to send the photo via a picture message.  
Set as: allows you to set the photo as your Caller ID or Wallpaper.  
Delete: allows you to delete the selected or multiple photos.  
Default destination: allows you to change where your photos are sent after  
you take them: Recent recipients, Phonebook, Phone number, Email address,  
My Album, or My Journal.  
Move to memory card: removes the image from the phone’s onboard  
memory and then moves it onto the inserted memory card.  
Copy to memory card: makes a copy of the photo and then moves the copy  
onto the inserted memory card.  
Edit image: allows you modify the current image by inserting objects (such as  
frames, emoticons, or clip art) or also overlaying image effects onto the photo  
such as: Black&White, Negative, Sepia, Emboss, or Sketch.  
Rename: allows you to rename the photo.  
Display mode: allows you to view the pictures in Line view or Thumbnail  
view.  
Slide show: allows you to see all of your photos in a slide show presentation.  
Choose from 1 or 3 seconds intervals.  
Lock/Unlock: allows you to lock the photo to protect it from deletion, or unlock  
an already locked photo.  
Properties: shows the properties of the photo, such as the file name, file date,  
file format, image resolution, file size, and lock/unlock status.  
Camera 156  
   
Deleting a Photo  
You can delete photos one by one or all at one time.  
1. From the Photos menu, highlight the photo you want to delete. Press the  
Options soft key and select Delete.  
2. Press the Select soft key then press the Right Navigation key.  
3. Select Selected or Multiple and press the Select soft key or the  
key.  
4. Press the Yes soft key to confirm the deletion.  
5. Press the  
Videos  
To access your videos:  
key to return to Idle mode.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select  
soft key or the  
key to enter the menu.  
3. Highlight Camera and press the Select soft key or the  
key.  
key.  
4. Select Videos and press the Select soft key or the  
When you access this menu, your phone displays the videos in Line view,  
with the initial frame shown as small images. Use the Navigation keys to  
scroll through the videos. The Video folder cotains a list of videos you have  
recorded, videos downloaded from the web server, or videos received in  
multimedia messages.  
5. Select a video clip from your Videos folder by scrolling to the video you  
want to view, highlighting it and pressing the Options soft key to choose  
from the following options:  
Play: plays the selected video.  
Send to My Album: moves the video to your My Album folder.  
Send via: sends the video using a picture message.  
Delete: deletes the selected video or all videos.  
Default destination: allows you to change where your videos are sent after you  
take them: Recent recipients, Phonebook, Phone number, Email address, My  
Album, or My Journal.  
Move to memory card: allows you to move the Selected or Multiple videos to  
the Memory card.  
Copy to memory card: allows you to copy the Selected or Multiple videos to  
the Memory card.  
Rename: changes the name of the video.  
157  
   
My Album  
Display mode: allows you to view the pictures in Line view or Thumbnail  
view.  
Lock/Unlock: locks the video to protect it from deletion or unlocks it to allow  
deletion.  
Properties: displays the video name, date, format, resolution, date, length,  
quality, and lock/unlock status.  
My Album  
My Album is a private online picture album that you can use to store and share  
pictures, videos, voice messages, and text.  
Use the following procedures to access My Album.  
Note: When accessing My Album, charges may apply. The feature is not activated until you send your first  
image to the remote My Album location.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select  
soft key or the  
key to enter the menu.  
3. Highlight Camera and press the Select soft key or the  
key.  
4. Select My Album and press the Select soft key or the  
key. The  
t-zones browser is then launched and the T-Mobile Web page displays.  
5. Select the My Albums Menu link and press the Select soft key or the  
key.  
6. Photos sent to this folder are stored in the Inbox Album. Press the  
key to view the photos.  
7. Press the  
key to exit t-zones and return to the Idle screen.  
My Journal  
Make notes in My Journal, your online diary and Weblog. Keep it private to store your  
personal memories, or send email invitations to ask people to view and comment on  
your album. Contact T-Mobile customer service for more information.  
Note: Charges may apply when accessing My Journal. Contact your T-Mobile service representative.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select  
soft key or the  
key to enter the menu.  
3. Highlight Camera and press the Select soft key or the  
key.  
Camera 158  
       
4. Select My Journal and press the Select soft key or the  
key. The  
t-zones browser is then launched and the T-Mobile Web page displays.  
Important!: You must log in from a web browser and set up My Journal before you can access it.  
159  
t-zones  
Section 13: t-zones  
Topics Covered  
t-zones  
This section outlines the t-zones features available on your phone. For more  
information, contact T-Mobile.  
t-zones  
Your phone is equipped with a WAP (Wireless Application Protocol) browser which  
provides you wireless access and navigation to the Web using your phone.  
Tip: Press the t-zones soft key  
while in Idle mode to bypass the t-zones menu.  
To access t-zones via the menu, follow these steps:  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Using the Navigation keys, scroll to the t-zones icon. Press the Select soft  
key or the  
key to enter the menu.  
-OR-  
To access t-zones directly, follow these steps:  
In Idle mode, press the t-zones soft key to access the t-zones menu.  
The following options are available:  
Home  
Press the Menu soft key to select this menu and connect the phone to the network  
and loads the t-zones homepage.  
The content of the t-zones startup homepage depends on your Wireless Web service  
provider. To scroll through the screen, use the Up and Down keys.  
To go to the startup homepage from any other screen in the t-zones, use the Home  
option. For more information on the t-zones menus, see "Selecting and Using Menu  
Exiting the t-zones  
To exit the browser at any time, simply press the  
key.  
t-zones 160  
           
Navigating the t-zones  
1. To scroll through browser items, press the Up or Down Navigation key.  
2. To select browser items, press the Options soft key, highlight Select and  
press the OK soft key.  
3. To return to the previous page, press Options soft key, highlight Back and  
press the OK soft key.  
4. To return to the startup homepage, press the Menu soft key, highlight  
Home and press the Select soft key.  
Entering Text in the t-zones  
While you are navigating the t-zones you often need to enter text, such as when  
entering a URL. You can enter alphanumeric characters by using your phone’s  
Selecting and Using Menu Options  
Various menus are available when you are using t-zones to navigate the Wireless  
Web.  
To access the browser options menu:  
Press the Menu soft key.  
Note: The menus may vary, depending on your version of t-zones.  
The following options are available:  
- Go to URL: allows you to manually enter the URL address of a Web page. After  
entering an address, press the  
key to go there directly.  
- Bookmarks: shows the bookmarks list. You can bookmark the current web page or  
access previously bookmarked pages.  
- Messages: allows you to create a text message or check your My messages folder.  
- My files: allows you to go to your Files folders.  
- Home: takes you back at any time to the home page of the Wireless Web service  
provider.  
- Back: takes you back to the previous web browser screen.  
- Show URL: displays the URL address of the Web page to which you are currently  
connected. It also enables you to set the current site as the startup home page.  
- Reload: reloads the current page.  
161  
       
t-zones  
Enter URL  
This menu allows you to manually enter the URL address of a web site that you wish  
to access.  
For further details about entering characters, see "Entering Text" on page 60.  
Bookmarks  
This menu stores up to 15 URL addresses.  
To store a URL address:  
1. Select an empty location and press the Select soft key or the  
key.  
2. Enter a name for the favorite item in the Name text box and press the  
Down key.  
3. Enter the address in the URL text box and press the Options soft key.  
4. Highlight the Save option and press the Select soft key or the  
key.  
Note: For further details about how to enter characters, see "Entering Text" on page 60.  
5. Highlight an item after saving favorite items, then press the Options soft  
key to access the following:  
Open: navigates to the site.  
Edit: allows you to edit the address.  
Delete: allows you to delete the address.  
6. Select the favorite item and press the  
key. Your browser displays the  
site.  
Clear Cache  
You can clear the information stored in the cache, which is the phone’s temporary  
memory which stores the most recently accessed web pages.  
At the Are you sure you want to clear? prompt, press the Yes soft key to  
confirm the deletion. Otherwise, press the No soft key.  
t-zones 162  
   
Section 14: Health and Safety Information  
Topics Covered  
This section outlines the safety precautions associated with using your phone. These  
safety precautions should be followed to safely use your phone.  
Health and Safety Information  
Exposure to Radio Frequency (RF) Signals  
Certification Information (SAR)  
Your wireless phone is a radio transmitter and receiver. It is designed and  
manufactured not to exceed the exposure limits for radio frequency (RF) energy set  
by the Federal Communications Commission (FCC) of the U.S. government.  
163  
     
Health and Safety Information  
These FCC exposure limits are derived from the recommendations of two expert  
organizations, the National Counsel on Radiation Protection and Measurement  
(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases,  
the recommendations were developed by scientific and engineering experts drawn  
from industry, government, and academia after extensive reviews of the scientific  
literature related to the biological effects of RF energy.  
The exposure limit set by the FCC for wireless mobile phones employs a unit of  
measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of  
the rate of absorption of RF energy by the human body expressed in units of watts  
per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit  
of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a  
substantial margin of safety to give additional protection to the public and to account  
for any variations in measurements.  
SAR tests are conducted using standard operating positions accepted by the FCC  
with the phone transmitting at its highest certified power level in all tested frequency  
bands. Although the SAR is determined at the highest certified power level, the  
actual SAR level of the phone while operating can be well below the maximum value.  
This is because the phone is designed to operate at multiple power levels so as to  
use only the power required to reach the network. In general, the closer you are to a  
wireless base station antenna, the lower the power output.  
Before a new model phone is available for sale to the public, it must be tested and  
certified to the FCC that it does not exceed the exposure limit established by the  
FCC. Tests for each model phone are performed in positions and locations (e.g. at  
the ear and worn on the body) as required by the FCC. For body worn operation, this  
phone has been tested and meets FCC RF exposure guidelines when used with an  
accessory that contains no metal and that positions the handset a minimum of  
1.5 cm from the body. Use of other accessories may not ensure compliance with FCC  
RF exposure guidelines.  
The FCC has granted an Equipment Authorization for this mobile phone with all  
reported SAR levels evaluated as in compliance with the FCC RF exposure  
guidelines. The maximum SAR values for this model phone as reported to the FCC  
are:  
Head: 0.662 W/Kg.  
Body-worn: 1.43 W/Kg.  
Health and Safety Information 164  
SAR information on this and other model phones can be viewed on-line at  
http://www.fcc.gov/oet/ea. To find information that pertains to a particular model  
phone, this site uses the phone FCC ID number which is usually printed somewhere  
on the case of the phone.  
Sometimes it may be necessary to remove the battery pack to find the number. Once  
you have the FCC ID number for a particular phone, follow the instructions on the  
website and it should provide values for typical or maximum SAR for a particular  
phone. Additional product specific SAR information can also be obtained at  
Samsung Mobile Products and Recycling  
Samsung cares for the environment and encourages its customers to recycle  
Samsung mobile phones and genuine Samsung accessories.  
UL Certified Travel Adapter  
The Travel Adapter for this phone has met applicable UL safety requirements. Please  
adhere to the following safety instructions per UL guidelines.  
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS  
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE  
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.  
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW  
THESE INSTRUCTIONS.  
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN ATTACHMENT  
PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET. THIS  
POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR  
HORIZONTAL OR FLOOR MOUNT POSITION.  
Consumer Information on Wireless Phones  
The U.S. Food and Drug Administration (FDA) has published a series of Questions  
and Answers for consumers relating to radio frequency (RF) exposure from wireless  
phones. The FDA publication includes the following information:  
165  
     
Consumer Information on Wireless Phones  
What kinds of phones are the subject of this update?  
The term wireless phone refers here to hand-held wireless phones with built-in  
antennas, often called "cell," "mobile," or "PCS" phones. These types of wireless  
phones can expose the user to measurable radio frequency energy (RF) because of  
the short distance between the phone and the user's head. These RF exposures are  
limited by Federal Communications Commission safety guidelines that were  
developed with the advice of FDA and other federal health and safety agencies.  
When the phone is located at greater distances from the user, the exposure to RF is  
drastically lower because a person's RF exposure decreases rapidly with increasing  
distance from the source. The so-called "cordless phones," which have a base unit  
connected to the telephone wiring in a house, typically operate at far lower power  
levels, and thus produce RF exposures well within the FCC's compliance limits.  
Do wireless phones pose a health hazard?  
The available scientific evidence does not show that any health problems are  
associated with using wireless phones. There is no proof, however, that wireless  
phones are absolutely safe. Wireless phones emit low levels of radio frequency  
energy (RF) in the microwave range while being used. They also emit very low levels  
of RF when in the stand-by mode. Whereas high levels of RF can produce health  
effects (by heating tissue), exposure to low level RF that does not produce heating  
effects causes no known adverse health effects. Many studies of low level RF  
exposures have not found any biological effects. Some studies have suggested that  
some biological effects may occur, but such findings have not been confirmed by  
additional research. In some cases, other researchers have had difficulty in  
reproducing those studies, or in determining the reasons for inconsistent results.  
What is FDA's role concerning the safety of wireless  
phones?  
Under the law, FDA does not review the safety of radiation-emitting consumer  
products such as wireless phones before they can be sold, as it does with new drugs  
or medical devices. However, the agency has authority to take action if wireless  
phones are shown to emit radio frequency energy (RF) at a level that is hazardous to  
the user. In such a case, FDA could require the manufacturers of wireless phones to  
notify users of the health hazard and to repair, replace or recall the phones so that  
the hazard no longer exists.  
Health and Safety Information 166  
Although the existing scientific data do not justify FDA regulatory actions, FDA has  
urged the wireless phone industry to take a number of steps, including the following:  
Support needed research into possible biological effects of RF of the type emitted  
by wireless phones;  
Design wireless phones in a way that minimizes any RF exposure to the user that  
is not necessary for device function; and  
Cooperate in providing users of wireless phones with the best possible information  
on possible effects of wireless phone use on human health.  
FDA belongs to an interagency working group of the federal agencies that have  
responsibility for different aspects of RF safety to ensure coordinated efforts at the  
federal level. The following agencies belong to this working group:  
National Institute for Occupational Safety and Health  
Environmental Protection Agency  
Federal Communications Commission  
Occupational Safety and Health Administration  
National Telecommunications and Information Administration  
The National Institutes of Health participates in some interagency working group  
activities, as well.  
FDA shares regulatory responsibilities for wireless phones with the Federal  
Communications Commission (FCC). All phones that are sold in the United States  
must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA  
and other health agencies for safety questions about wireless phones.  
FCC also regulates the base stations that the wireless phone networks rely upon.  
While these base stations operate at higher power than do the wireless phones  
themselves, the RF exposures that people get from these base stations are typically  
thousands of times lower than those they can get from wireless phones. Base  
stations are thus not the primary subject of the safety questions discussed in this  
document.  
167  
Consumer Information on Wireless Phones  
What are the results of the research done already?  
The research done thus far has produced conflicting results, and many studies have  
suffered from flaws in their research methods. Animal experiments investigating the  
effects of radio frequency energy (RF) exposures characteristic of wireless phones  
have yielded conflicting results that often cannot be repeated in other laboratories. A  
few animal studies, however, have suggested that low levels of RF could accelerate  
the development of cancer in laboratory animals. However, many of the studies that  
showed increased tumor development used animals that had been genetically  
engineered or treated with cancer-causing chemicals so as to be pre-disposed to  
develop cancer in absence of RF exposure. Other studies exposed the animals to RF  
for up to 22 hours per day. These conditions are not similar to the conditions under  
which people use wireless phones, so we don't know with certainty what the results  
of such studies mean for human health.  
Three large epidemiology studies have been published since December 2000.  
Between them, the studies investigated any possible association between the use of  
wireless phones and primary brain cancer, glioma, meningioma, or acoustic  
neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of  
the studies demonstrated the existence of any harmful health effects from wireless  
phones RF exposures. However, none of the studies can answer questions about  
long-term exposures, since the average period of phone use in these studies was  
around three years.  
What research is needed to decide whether RF exposure  
from wireless phones poses a health risk?  
A combination of laboratory studies and epidemiological studies of people actually  
using wireless phones would provide some of the data that are needed. Lifetime  
animal exposure studies could be completed in a few years. However, very large  
numbers of animals would be needed to provide reliable proof of a cancer promoting  
effect if one exists. Epidemiological studies can provide data that is directly  
applicable to human populations, but ten or more years' follow-up may be needed to  
provide answers about some health effects, such as cancer. This is because the  
interval between the time of exposure to a cancer-causing agent and the time  
tumors develop - if they do - may be many, many years. The interpretation of  
epidemiological studies is hampered by difficulties in measuring actual RF exposure  
during day-to-day use of wireless phones. Many factors affect this measurement,  
such as the angle at which the phone is held, or which model of phone is used.  
Health and Safety Information 168  
What is FDA doing to find out more about the possible  
health effects of wireless phone RF?  
FDA is working with the U.S. National Toxicology Program and with groups of  
investigators around the world to ensure that high priority animal studies are  
conducted to address important questions about the effects of exposure to radio  
frequency energy (RF).  
FDA has been a leading participant in the World Health Organization international  
Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result  
of this work has been the development of a detailed agenda of research needs that  
has driven the establishment of new research programs around the world. The  
Project has also helped develop a series of public information documents on EMF  
issues.  
FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal  
Cooperative Research and Development Agreement (CRADA) to do research on  
wireless phone safety. FDA provides the scientific oversight, obtaining input from  
experts in government, industry, and academic organizations. CTIA-funded research  
is conducted through contracts to independent investigators. The initial research will  
include both laboratory studies and studies of wireless phone users. The CRADA will  
also include a broad assessment of additional research needs in the context of the  
latest research developments around the world.  
What steps can I take to reduce my exposure to radio  
frequency energy from my wireless phone?  
If there is a risk from these products - and at this point we do not know that there is  
- it is probably very small. But if you are concerned about avoiding even potential  
risks, you can take a few simple steps to minimize your exposure to radio frequency  
energy (RF). Since time is a key factor in how much exposure a person receives,  
reducing the amount of time spent using a wireless phone will reduce RF exposure.  
If you must conduct extended conversations by wireless phone every day, you  
could place more distance between your body and the source of the RF, since the  
exposure level drops off dramatically with distance. For example, you could use a  
headset and carry the wireless phone away from your body or use a wireless  
phone connected to a remote antenna.  
Again, the scientific data do not demonstrate that wireless phones are harmful. But if  
you are concerned about the RF exposure from these products, you can use  
measures like those described above to reduce your RF exposure from wireless  
phone use.  
169  
Consumer Information on Wireless Phones  
What about children using wireless phones?  
The scientific evidence does not show a danger to users of wireless phones,  
including children and teenagers. If you want to take steps to lower exposure to  
radio frequency energy (RF), the measures described above would apply to children  
and teenagers using wireless phones. Reducing the time of wireless phone use and  
increasing the distance between the user and the RF source will reduce RF  
exposure.  
Some groups sponsored by other national governments have advised that children  
be discouraged from using wireless phones at all. For example, the government in  
the United Kingdom distributed leaflets containing such a recommendation in  
December 2000. They noted that no evidence exists that using a wireless phone  
causes brain tumors or other ill effects. Their recommendation to limit wireless  
phone use by children was strictly precautionary; it was not based on scientific  
evidence that any health hazard exists.  
Do hands-free kits for wireless phones reduce  
risks from exposure to RF emissions?  
Since there are no known risks from exposure to RF emissions from wireless  
phones, there is no reason to believe that hands-free kits reduce risks. Hands-free  
kits can be used with wireless phones for convenience and comfort. These systems  
reduce the absorption of RF energy in the head because the phone, which is the  
source of the RF emissions, will not be placed against the head. On the other hand, if  
the phone is mounted against the waist or other part of the body during use, then  
that part of the body will absorb more RF energy. Wireless phones marketed in the  
U.S. are required to meet safety requirements regardless of whether they are used  
against the head or against the body. Either configuration should result in  
compliance with the safety limit.  
Do wireless phone accessories that claim to shield  
the head from RF radiation work?  
Since there are no known risks from exposure to RF emissions from wireless  
phones, there is no reason to believe that accessories that claim to shield the head  
from those emissions reduce risks. Some products that claim to shield the user from  
RF absorption use special phone cases, while others involve nothing more than a  
metallic accessory attached to the phone. Studies have shown that these products  
generally do not work as advertised. Unlike "hand-free" kits, these so-called  
"shields" may interfere with proper operation of the phone. The phone may be  
forced to boost its power to compensate, leading to an increase in RF absorption.  
Health and Safety Information 170  
In February 2002, the Federal trade Commission (FTC) charged two companies that  
sold devices that claimed to protect wireless phone users from radiation with  
making false and unsubstantiated claims. According to FTC, these defendants  
lacked a reasonable basis to substantiate their claim.  
What about wireless phone interference with  
medical equipment?  
Radio frequency energy (RF) from wireless phones can interact with some electronic  
devices. For this reason, FDA helped develop a detailed test method to measure  
electromagnetic interference (EMI) of implanted cardiac pacemakers and  
defibrillators from wireless telephones. This test method is now part of a standard  
sponsored by the Association for the Advancement of Medical instrumentation  
(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and  
many other groups, was completed in late 2000. This standard will allow  
manufacturers to ensure that cardiac pacemakers and defibrillators are safe from  
wireless phone EMI. FDA has tested wireless phones and helped develop a voluntary  
standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This  
standard specifies test methods and performance requirements for hearing aids and  
wireless phones so that no interference occurs when a person uses a compatible  
phone and a compatible hearing aid at the same time. This standard was approved  
by the IEEE in 2000.  
FDA continues to monitor the use of wireless phones for possible interactions with  
other medical devices. Should harmful interference be found to occur, FDA will  
conduct testing to assess the interference and work to resolve the problem.  
Additional information on the safety of RF exposures from various sources can be  
obtained from the following organizations (Updated 12/1/2006):  
FCC RF Safety Program:  
Environmental Protection Agency (EPA):  
Occupational Safety and Health Administration's (OSHA):  
National Institute for Occupational Safety and Health (NIOSH):  
World Health Organization (WHO):  
171  
Road Safety  
International Commission on Non-Ionizing Radiation Protection:  
National Radiation Protection Board (UK):  
US Food and Drug Administration  
Road Safety  
Your wireless phone gives you the powerful ability to communicate by voice, almost  
anywhere, anytime. But an important responsibility accompanies the benefits of  
wireless phones, one that every user must uphold.  
When driving a car, driving is your first responsibility. When using your wireless  
phone behind the wheel of a car, practice good common sense and remember the  
following tips:  
1. Get to know your wireless phone and its features, such as speed dial and  
redial. If available, these features help you to place your call without taking  
your attention off the road.  
2. When available, use a hands-free device. If possible, add an additional  
layer of convenience and safety to your wireless phone with one of the  
many hands free accessories available today.  
3. Position your wireless phone within easy reach. Be able to access your  
wireless phone without removing your eyes from the road. If you get an  
incoming call at an inconvenient time, let your voice mail answer it for you.  
4. Let the person you are speaking with know you are driving; if necessary,  
suspend the call in heavy traffic or hazardous weather conditions. Rain,  
sleet, snow, ice and even heavy traffic can be hazardous.  
5. Do not take notes or look up phone numbers while driving. Jotting down a  
"to do" list or flipping through your address book takes attention away  
from your primary responsibility, driving safely.  
6. Dial sensibly and assess the traffic; if possible, place calls when you are  
not moving or before pulling into traffic. Try to plan calls when your car will  
be stationary. If you need to make a call while moving, dial only a few  
numbers, check the road and your mirrors, then continue.  
Health and Safety Information 172  
 
7. Do not engage in stressful or emotional conversations that may be  
distracting. Make people you are talking with aware you are driving and  
suspend conversations that have the potential to divert your attention from  
the road.  
8. Use your wireless phone to call for help. Dial 9-1-1 or other local  
emergency number in the case of fire, traffic accident or medical  
emergencies.  
9. Use your wireless phone to help others in emergencies. If you see an auto  
accident, crime in progress or other serious emergency where lives are in  
danger, call 9-1-1 or other local emergency number, as you would want  
others to do for you.  
10. Call roadside assistance or a special non-emergency wireless assistance  
number when necessary. If you see a broken-down vehicle posing no  
serious hazard, a broken traffic signal, a minor traffic accident where no  
one appears injured, or a vehicle you know to be stolen, call roadside  
assistance or other special non-emergency number.  
"The wireless industry reminds you to use your phone safely when driving."  
For more information, please call 1-888-901-SAFE, or visit our web-site  
Important!: If you are using a handset other than a standard numeric keypad, please call 1-888-901-7233.  
Provided by the Cellular Telecommunications & Internet Association.  
Responsible Listening  
Caution!: Avoid potential hearing loss.  
Damage to hearing occurs when a person is exposed to loud sounds over time. The  
risk of hearing loss increases as sound is played louder and for longer durations.  
Prolonged exposure to loud sounds (including music) is the most common cause of  
preventable hearing loss. Some scientific research suggests that using portable  
audio devices, such as portable music players and cellular telephones, at high  
volume settings for long durations may lead to permanent noise-induced hearing  
loss. This includes the use of headphones (including headsets, earbuds, and  
Bluetooth or other wireless devices). Exposure to very loud sound has also been  
associated in some studies with tinnitus (a ringing in the ear), hypersensitivity to  
sound and distorted hearing.  
173  
 
Responsible Listening  
Individual susceptibility to noise-induced hearing loss and potential hearing problem  
varies. Additionally, the amount of sound produced by a portable audio device varies  
depending on the nature of the sound, the device settings, and the headphones that  
are used. As a result, there is no single volume setting that is appropriate for  
everyone or for every combination of sound, settings and equipment.  
You should follow some commonsense recommendations when using any portable  
audio device:  
Set the volume in a quiet environment and select the lowest volume at which you  
can hear adequately.  
When using headphones, turn the volume down if you cannot hear the people  
speaking near you or if the person sitting next to you can hear what you are  
listening to.  
Do not turn the volume up to block out noisy surroundings. If you choose to listen  
to your portable device in a noisy environment, you noise-cancelling headphones  
to block out background environmental noise. By blocking background  
environment noise, noise cancelling headphones should allow you to hear the  
music at lower volumes than when using earbuds.  
Limit the amount of time you listen. As the volume increases, less time is required  
before you hearing could be affected.  
Avoid using headphones after exposure to extremely loud noises, such as rock  
concerts, that might cause temporary hearing loss. Temporary hearing loss might  
cause unsafe volumes to sound normal.  
Do not listen at any volume that causes you discomfort. If you experience ringing in  
your ears, hear muffled speech or experience any temporary hearing difficulty  
after listening to your portable audio device, discontinue use and consult your  
doctor.  
You can obtain additional information on this subject from the following sources:  
American Academy of Audiology  
11730 Plaza American Drive, Suite 300  
Reston, VA 20190  
Voice: (800) 222-2336  
Internet: www.audiology.org  
Health and Safety Information 174  
National Institute on Deafness and Other Communication Disorders  
National Institutes of Health  
31 Center Drive, MSC 2320  
Bethesda, MD 20892-2320  
Voice: (301) 496-7243  
National Institute for Occupational Safety and Health  
Hubert H. Humphrey Bldg.  
200 Independence Ave., SW  
Washington, DC 20201  
Voice: 1-800-35-NIOSH (1-800-356-4647)  
Operating Environment  
Remember to follow any special regulations in force in any area and always switch  
your phone off whenever it is forbidden to use it, or when it may cause interference  
or danger. When connecting the phone or any accessory to another device, read its  
user's guide for detailed safety instructions. Do not connect incompatible products.  
As with other mobile radio transmitting equipment, users are advised that for the  
satisfactory operation of the equipment and for the safety of personnel, it is  
recommended that the equipment should only be used in the normal operating  
position (held to your ear with the antenna pointing over your shoulder if you are  
using an external antenna).  
Using Your Phone Near Other Electronic Devices  
Most modern electronic equipment is shielded from radio frequency (RF) signals.  
However, certain electronic equipment may not be shielded against the RF signals  
from your wireless phone. Consult the manufacturer to discuss alternatives.  
175  
   
Using Your Phone Near Other Electronic Devices  
Implantable Medical Devices  
A minimum separation of six (6) inches should be maintained between a handheld  
wireless phone and an implantable medical device, such as a pacemaker or  
implantable cardioverter defibrillator, to avoid potential interference with the device.  
Persons who have such devices:  
Should ALWAYS keep the phone more than six (6) inches from their implantable  
medical device when the phone is turned ON;  
Should not carry the phone in a breast pocket;  
Should use the ear opposite the implantable medical device to minimize the  
potential for interference;  
Should turn the phone OFF immediately if there is any reason to suspect that  
interference is taking place.  
Should read and follow the directions from the manufacturer of your implantable  
medical device. if you have any questions about using your wireless phone with  
such a device, consult your health care provider.  
Hearing Aids  
Some digital wireless phones may interfere with some hearing aids. In the event of  
such interference, you may wish to consult your hearing aid manufacturer to discuss  
alternatives.  
Other Medical Devices  
If you use any other personal medical devices, consult the manufacturer of your  
device to determine if it is adequately shielded from external RF energy. Your  
physician may be able to assist you in obtaining this information. Switch your phone  
off in health care facilities when any regulations posted in these areas instruct you to  
do so. Hospitals or health care facilities may be using equipment that could be  
sensitive to external RF energy.  
Vehicles  
RF signals may affect improperly installed or inadequately shielded electronic  
systems in motor vehicles. Check with the manufacturer or its representative  
regarding your vehicle. You should also consult the manufacturer of any equipment  
that has been added to your vehicle.  
Posted Facilities  
Switch your phone off in any facility where posted notices require you to do so.  
Health and Safety Information 176  
Potentially Explosive Environments  
Switch your phone off when in any area with a potentially explosive atmosphere and  
obey all signs and instructions. Sparks in such areas could cause an explosion or fire  
resulting in bodily injury or even death.  
Users are advised to switch the phone off while at a refueling point (service station).  
Users are reminded of the need to observe restrictions on the use of radio equipment  
in fuel depots (fuel storage and distribution areas), chemical plants or where blasting  
operations are in progress.  
Areas with a potentially explosive atmosphere are often but not always clearly  
marked. They include below deck on boats, chemical transfer or storage facilities,  
vehicles using liquefied petroleum gas (such as propane or butane), areas where the  
air contains chemicals or particles, such as grain, dust or metal powders, and any  
other area where you would normally be advised to turn off your vehicle engine.  
Emergency Calls  
This phone, like any wireless phone, operates using radio signals, wireless and  
landline networks as well as user-programmed functions, which cannot guarantee  
connection in all conditions. Therefore, you should never rely solely on any wireless  
phone for essential communications (medical emergencies, for example).  
Remember, to make or receive any calls the phone must be switched on and in a  
service area with adequate signal strength. Emergency calls may not be possible on  
all wireless phone networks or when certain network services and/or phone features  
are in use. Check with local service providers.  
To make an emergency call:  
1. If the phone is not on, switch it on.  
2. Key in the emergency number for your present location (for example, 911  
or other official emergency number). Emergency numbers vary by location.  
3. Press the  
key.  
If certain features are in use (call barring, for example), you may first need to  
deactivate those features before you can make an emergency call. Consult this  
document and your local cellular service provider.  
When making an emergency call, remember to give all the necessary information as  
accurately as possible. Remember that your phone may be the only means of  
communication at the scene of an accident; do not cut off the call until given  
permission to do so.  
177  
   
FCC Notice and Cautions  
Restricting Children's access to your Phone  
Your phone is not a toy. Children should not be allowed to play with it because they  
could hurt themselves and others, damage the phone or make calls that increase  
your phone bill.  
FCC Notice and Cautions  
FCC Notice  
The phone may cause TV or radio interference if used in close proximity to receiving  
equipment. The FCC can require you to stop using the phone if such interference  
cannot be eliminated.  
Vehicles using liquefied petroleum gas (such as propane or butane) must comply  
with the National Fire Protection Standard (NFPA-58). For a copy of this standard,  
contact the National Fire Protection Association, One Batterymarch Park, Quincy, MA  
02269, Attn: Publication Sales Division.  
Cautions  
Any changes or modifications to your phone not expressly approved in this  
document could void your warranty for this equipment, and void your authority to  
operate this equipment. Only use approved batteries, antennas and chargers. The  
use of any unauthorized accessories may be dangerous and void the phone warranty  
if said accessories cause damage or a defect to the phone.  
Although your phone is quite sturdy, it is a complex piece of equipment and can be  
broken. Avoid dropping, hitting, bending or sitting on it.  
Other Important Safety Information  
Only qualified personnel should service the phone or install the phone in a vehicle.  
Faulty installation or service may be dangerous and may invalidate any warranty  
applicable to the device.  
Check regularly that all wireless phone equipment in your vehicle is mounted and  
operating properly.  
Do not store or carry flammable liquids, gases or explosive materials in the same  
compartment as the phone, its parts or accessories.  
For vehicles equipped with an air bag, remember that an air bag inflates with great  
force. Do not place objects, including both installed or portable wireless equipment  
in the area over the air bag or in the air bag deployment area. If wireless  
equipment is improperly installed and the air bag inflates, serious injury could  
result.  
Health and Safety Information 178  
   
Switch your phone off before boarding an aircraft. The use of wireless phone in  
aircraft is illegal and may be dangerous to the aircraft's operation.  
Failure to observe these instructions may lead to the suspension or denial of  
telephone services to the offender, or legal action, or both.  
Product Performance  
Getting the Most Out of Your Signal Reception  
The quality of each call you make or receive depends on the signal strength in your  
area. Your phone informs you of the current signal strength by displaying a number  
of bars next to the signal strength icon. The more bars displayed, the stronger the  
signal.  
If you're inside a building, being near a window may give you better reception.  
Understanding the Power Save Feature  
If your phone is unable to find a signal after searching, a Power Save feature is  
automatically activated. If your phone is active, it periodically rechecks service  
availability or you can check it yourself by pressing any key.  
Anytime the Power Save feature is activated, a message displays on the screen.  
When a signal is found, your phone returns to standby mode.  
Understanding How Your Phone Operates  
Your phone is basically a radio transmitter and receiver. When it's turned on, it  
receives and transmits radio frequency (RF) signals. When you use your phone, the  
system handling your call controls the power level. This power can range from 0.006  
watts to 0.2 watts in digital mode.  
Maintaining Your Phone's Peak Performance  
For the best care of your phone, only authorized personnel should service your  
phone and accessories. Faulty service may void the warranty.  
There are several simple guidelines to operating your phone properly and  
maintaining safe, satisfactory service.  
If your phone is equipped with an external antenna, hold the phone with the  
antenna raised, fully-extended and over your shoulder.  
Do not hold, bend or twist the phone's antenna, if applicable.  
Do not use the phone if the antenna is damaged.  
If your phone is equipped with an internal antenna, obstructing the internal  
antenna could inhibit call performance.  
Speak directly into the phone's receiver.  
179  
 
Availability of Various Features/Ring Tones  
Avoid exposing your phone and accessories to rain or liquid spills. If your phone  
does get wet, immediately turn the power off and remove the battery. If it is  
inoperable, call Customer Care for service.  
Availability of Various Features/Ring Tones  
Many services and features are network dependent and may require additional  
subscription and/or usage charges. Not all features are available for purchase or use  
in all areas. Downloadable Ring Tones may be available at an additional cost. Other  
conditions and restrictions may apply. See your service provider for additional  
information.  
Battery Standby and Talk Time  
Standby and talk times will vary depending on phone usage patterns and conditions.  
Battery power consumption depends on factors such as network configuration,  
signal strength, operating temperature, features selected, frequency of calls, and  
voice, data, and other application usage patterns.  
Battery Precautions  
Avoid dropping the cell phone. Dropping it, especially on a hard surface, can  
potentially cause damage to the phone and battery. If you suspect damage to the  
phone or battery, take it to a service center for inspection.  
Never use any charger or battery that is damaged in any way.  
Do not modify or remanufacture the battery as this could result in serious safety  
hazards.  
If you use the phone near the network's base station, it uses less power; talk and  
standby time are greatly affected by the signal strength on the cellular network  
and the parameters set by the network operator.  
Follow battery usage, storage and charging guidelines found in the user’s guide.  
Battery charging time depends on the remaining battery charge and the type of  
battery and charger used. The battery can be charged and discharged hundreds of  
times, but it will gradually wear out. When the operation time (talk time and  
standby time) is noticeably shorter than normal, it is time to buy a new battery.  
If left unused, a fully charged battery will discharge itself over time.  
Use only Samsung-approved batteries and recharge your battery only with  
Samsung-approved chargers. When a charger is not in use, disconnect it from the  
power source. Do not leave the battery connected to a charger for more than a  
week, since overcharging may shorten its life.  
Health and Safety Information 180  
     
Do not use incompatible cell phone batteries and chargers. Some Web sites and  
second-hand dealers, not associated with reputable manufacturers and carriers,  
might be selling incompatible or even counterfeit batteries and chargers.  
Consumers should purchase manufacturer or carrier recommended products and  
accessories. If unsure about whether a replacement battery or charger is  
compatible, contact the manufacturer of the battery or charger.  
Misuse or use of incompatible phones, batteries, and charging devices could result  
in damage to the equipment and a possible risk of fire, explosion, leakage, or other  
serious hazard.  
Extreme temperatures will affect the charging capacity of your battery: it may  
require cooling or warming first.  
Do not leave the battery in hot or cold places, such as in a car in summer or winter  
conditions, as you will reduce the capacity and lifetime of the battery. Always try to  
keep the battery at room temperature. A phone with a hot or cold battery may  
temporarily not work, even when the battery is fully charged. Li-ion batteries are  
particularly affected by temperatures below 0 °C (32 °F).  
Do not place the phone in areas that may get very hot, such as on or near a  
cooking surface, cooking appliance, iron, or radiator.  
Do not get your phone or battery wet. Even though they will dry and appear to  
operate normally, the circuitry could slowly corrode and pose a safety hazard.  
Do not short-circuit the battery. Accidental short-circuiting can occur when a  
metallic object (coin, clip or pen) causes a direct connection between the + and -  
terminals of the battery (metal strips on the battery), for example when you carry a  
spare battery in a pocket or bag. Short-circuiting the terminals may damage the  
battery or the object causing the short-circuiting.  
Do not permit a battery out of the phone to come in contact with metal objects,  
such as coins, keys or jewelry.  
Do not crush, puncture or put a high degree of pressure on the battery as this can  
cause an internal short-circuit, resulting in overheating.  
Dispose of used batteries in accordance with local regulations. In some areas, the  
disposal of batteries in household or business trash may be prohibited. For safe  
disposal options for Li-Ion batteries, contact your nearest Samsung authorized  
service center. Always recycle. Do not dispose of batteries in a fire.  
181  
Care and Maintenance  
Care and Maintenance  
Your phone is a product of superior design and craftsmanship and should be treated  
with care. The suggestions below will help you fulfill any warranty obligations and  
allow you to enjoy this product for many years.  
Keep the phone and all its parts and accessories out of the reach of small children.  
Keep the phone dry. Precipitation, humidity and liquids contain minerals that will  
corrode electronic circuits.  
Do not use the phone with a wet hand. Doing so may cause an electric shock to  
you or damage to the phone.  
Do not use or store the phone in dusty, dirty areas, as its moving parts may be  
damaged.  
Do not store the phone in hot areas. High temperatures can shorten the life of  
electronic devices, damage batteries, and warp or melt certain plastics.  
Do not store the phone in cold areas. When the phone warms up to its normal  
operating temperature, moisture can form inside the phone, which may damage  
the phone's electronic circuit boards.  
Do not drop, knock or shake the phone. Rough handling can break internal circuit  
boards.  
Do not use harsh chemicals, cleaning solvents or strong detergents to clean the  
phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water  
solution.  
Do not paint the phone. Paint can clog the device's moving parts and prevent  
proper operation.  
Do not put the phone in or on heating devices, such as a microwave oven, a stove  
or a radiator. The phone may explode when overheated.  
If your phone is equipped with an external antenna, use only the supplied or an  
approved replacement antenna. Unauthorized antennas or modified accessories  
may damage the phone and violate regulations governing radio devices.  
If the phone, battery, charger or any accessory is not working properly, take it to  
your nearest qualified service facility. The personnel there will assist you, and if  
necessary, arrange for service.  
Health and Safety Information 182  
 
Section 15: Warranty Information  
Topics Covered  
Standard Limited Warranty  
What is Covered and For How Long? SAMSUNG  
TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants to the original  
purchaser ("Purchaser") that SAMSUNG's Phones and accessories ("Products") are  
free from defects in material and workmanship under normal use and service for the  
period commencing upon the date of purchase and continuing for the following  
specified period of time after that date:  
Phone  
1 Year  
1 Year  
Batteries  
Leather Case/ Pouch  
Holster  
90 Days  
90 Days  
1 Year  
Other Phone Accessories  
What is Not Covered? This Limited Warranty is conditioned upon proper use of  
Product by Purchaser. This Limited Warranty does not cover: (a) defects or damage  
resulting from accident, misuse, abuse, neglect, unusual physical, electrical or  
electromechanical stress, or modification of any part of Product, including antenna,  
or cosmetic damage; (b) equipment that has the serial number removed or made  
illegible; (c) any plastic surfaces or other externally exposed parts that are scratched  
or damaged due to normal use; (d) malfunctions resulting from the use of Product in  
conjunction with accessories, products, or ancillary/peripheral equipment not  
furnished or approved by SAMSUNG; (e) defects or damage from improper testing,  
operation, maintenance, installation, or adjustment; (f) installation, maintenance,  
and service of Product, or (g) Product used or purchased outside the United States or  
Canada.  
183  
       
Standard Limited Warranty  
This Limited Warranty covers batteries only if battery capacity falls below 80% of  
rated capacity or the battery leaks, and this Limited Warranty does not cover any  
battery if (i) the battery has been charged by a battery charger not specified or  
approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery  
are broken or show evidence of tampering, or (iii) the battery has been used in  
equipment other than the SAMSUNG phone for which it is specified.  
What are SAMSUNG's Obligations? During the applicable warranty period,  
SAMSUNG will repair or replace, at SAMSUNG's sole option, without charge to  
Purchaser, any defective component part of Product. To obtain service under this  
Limited Warranty, Purchaser must return Product to an authorized phone service  
facility in an adequate container for shipping, accompanied by Purchaser's sales  
receipt or comparable substitute proof of sale showing the date of purchase, the  
serial number of Product and the sellers' name and address. To obtain assistance on  
where to deliver the Product, call Samsung Customer Care at 1-888-987-4357.  
Upon receipt, SAMSUNG will promptly repair or replace the defective Product.  
SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts  
or components when repairing any Product or replace Product with a rebuilt,  
reconditioned or new Product. Repaired/replaced leather cases, pouches and  
holsters will be warranted for a period of ninety (90) days. All other repaired/replaced  
Product will be warranted for a period equal to the remainder of the original Limited  
Warranty on the original Product or for 90 days, whichever is longer. All replaced  
parts, components, boards and equipment shall become the property of SAMSUNG.  
If SAMSUNG determines that any Product is not covered by this Limited Warranty,  
Purchaser must pay all parts, shipping, and labor charges for the repair or return of  
such Product.  
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY? EXCEPT AS SET  
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE  
PRODUCT "AS IS," AND SAMSUNG MAKES NO WARRANTY OR REPRESENTATION  
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR  
OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,  
INCLUDING BUT NOT LIMITED TO:  
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR  
PURPOSE OR USE;  
WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;  
Warranty Information 184  
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED  
THEREIN; OR  
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,  
SPECIFICATION OR CONTRACT PERTAINING THERETO.  
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO  
CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO  
THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY  
OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY  
LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY  
STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW  
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY  
TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY  
KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE  
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF  
USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY,  
INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR  
LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM  
ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED  
BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR  
FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. SOME  
STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL  
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY  
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU  
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO  
PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN  
THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S  
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS HELD ILLEGAL  
OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR  
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR THE  
REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS  
AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS  
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE  
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.  
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE NO  
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE  
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY  
THIRDPARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE  
185  
Standard Limited Warranty  
OR EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR  
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR  
EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,  
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR  
EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER  
OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY  
BE.  
This Limited Warranty allocates risk of Product failure between Purchaser and  
SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of risk and the  
limitations of liability contained in this Limited Warranty. The agents, employees,  
distributors, and dealers of SAMSUNG are not authorized to make modifications to  
this Limited Warranty, or make additional warranties binding on SAMSUNG.  
Accordingly, additional statements such as dealer advertising or presentation,  
whether oral or written, do not constitute warranties by SAMSUNG and should not be  
relied upon.  
Precautions for Transfer and Disposal  
If data stored on this device is deleted or reformatted using the standard methods,  
the data only appears to be removed on a superficial level, and it may be possible for  
someone to retrieve and reuse the data by means of special software.  
To avoid unintended information leaks and other problems of this sort, it is  
recommended that the device be returned to Samsung’s Customer Care Center for  
an Extended File System (EFS) Clear which will eliminate all user memory and return  
all settings to default settings. Please contact the Samsung Customer Care Center  
for details.  
Important!: Please provide warranty information (proof of purchase) to Samsung’s Customer Care Center in  
order to provide this service at no charge. If the warranty has expired on the device, charges  
may apply.  
Customer Care Center:  
1000 Klein St.  
Plano, TX 75074  
Toll Free Tel: 1.888.987.HELP (4357)  
Warranty Information 186  
Samsung Telecommunications America, LLC  
1301 East Lookout Drive  
Richardson, Texas 75082  
Phone: 1-800-SAMSUNG  
Phone: 1-888-987-HELP (4357)  
©2007 Samsung Telecommunications America. All rights reserved.  
No reproduction in whole or in part allowed without prior written approval.  
Specifications and availability subject to change without notice.  
187  
Index  
redialing last number 40  
silent mode 44  
Call Records  
A
all calls 42  
call time 44  
delete all 43  
ABC mode 60  
Accessing a Menu Function 51  
Alert type 101  
incoming calls 43  
missed calls 42  
outgoing calls 43  
Call Waiting 48, 107  
Caller ID 108  
B
Backlight  
description 21  
settings 98  
Battery  
Camcorder Options 153  
charging 11  
installation 9  
installing 9  
camcorder shortcuts 154  
default destination 153  
effects 153  
low indicator 13  
Bluetooth  
go to video 153  
settings 154  
about 100  
timer 153  
help 100  
searching for new devices  
Camera 121, 147  
taking photos 147  
Camera Options  
services 100  
turning bluetooth on and off  
timer 150  
Camera Shortcuts  
shortcut keys 155  
Brightness 98  
Broadcast Messages 91  
Change password 109  
Charging battery 11  
Configuring Picture Options 149  
C
D
Calendar 131  
Call Barring 107  
Delete All 89  
Call Functions 39  
adjusting the call volume 41  
answering a call 41  
call records 41  
Deleting Music Files 144  
Dialing a Number  
phonebook 70  
SIM card 68  
correcting the Number 40  
ending a call 40  
making a call 39  
Dialing display 99  
background color 99  
font color 99  
making a call from phonebook  
font size 99  
188  
 
Display  
backlight 21  
icons 20  
Drafts 88  
Instant Messaging 91  
options 92  
starting 91  
International Call 39  
DTMF 47  
K
E
Keypad Tone 101  
Entering Text 60  
L
Changing the Text Entry Mode  
Low battery indicator 13  
using ABC mode 63  
using number mode 64  
using symbol mode 64  
using T9 mode 61  
M
Making a Call  
phonebook 41  
MegaTones 101, 113  
Extra tones 103  
Memory Card  
inserting 7  
F
Memory card 118  
Memory Status 91  
Menu Navigation 51  
menu outline 52  
Message settings 90  
picture message 90  
receive settings 90  
send settings 90  
text message 90  
Message Tone 102  
Messages 77  
Files 112  
Fun & Apps 112  
Functions and Options 44  
G
Games 119  
create a new Games folder  
Getting Started 5  
activating your phone 5  
voice mail 13  
Messaging  
H
types of messages 77  
microSD memory card 118  
Missed Call  
Health and Safety Information 163  
Help 22  
HiFi Ringers 101, 113  
viewing 42  
Multi-Party Call 48  
dropping one participant 50  
private conversation 49  
setting up 49  
I
Icons, description 20  
Information display 98  
Inserting  
memory card 7  
189  
Music Player 139  
adding music 142  
timer 137  
tip calculator 135  
unit conversion 137  
world time 136  
assigning 145  
assigning a caller ringtone  
Outbox 87  
assigning alarm tone 146  
assigning ringtone 145  
options 139  
playing music 143  
settings 140  
Own Number 75  
P
Phone  
icons 20  
switching on/off 13  
Phone Keys 16  
Phone lock 109  
Phone Settings 95  
Phonebook  
shortcuts 141  
Mute 46  
My Album 115, 158  
My Journal 115, 158  
N
searching for a number 47  
Photos  
accessing pictures 156  
deleting pictures 157  
Picture Message  
Network Selection 108  
Network Services  
call barring 107  
call forwarding 106  
call waiting 107  
Caller ID 108  
viewing 85  
viewing after receiving 87  
network selection 108  
Notes 135  
Picture Messages 79  
PIN  
Number mode 60  
change 109  
check 109  
O
R
On/off switch, phone 13  
Options  
Recording Video 152  
Reset settings 111  
Ring tone 101  
during a call 46  
making a new call while in a  
call 46  
Ring Volume 101  
putting a call on hold 46  
Organizer 129  
alarm 129  
S
Security 109  
Settings 93  
bluetooth 100  
display 97  
calculator 135  
calendar 131  
Stopwatch 138  
synchronization 136  
network services 106  
190  
phone 95  
reset 111  
Switching on/off  
phone 13  
security 109  
Symbol mode 60  
sound 100  
T
synchronization 103  
Time & Date 93  
voice recognition 126  
T9 mode 60  
Take and Send 147  
Task List 134  
Templates 88  
Text input mode  
changing 60  
Shortcuts 52  
Silent mode 103  
SIM card  
installing 5  
Skin 98  
Slide settings 95  
Slide tone 103  
Soft Keys 45  
Sound Settings  
alert type 101  
Text Message  
viewing 84  
Text Messages 78  
Timer 137  
Transferring Music Files 144  
Travel adapter 11  
t-zones 160  
extra tones 103  
HiFi ringers 101  
incoming call 100  
keypad tone 101  
MegaTones 101  
power on/off tone 102  
ring tone 101  
bookmarks 162  
Enter URL 162  
entering Text 161  
exiting 160  
home 160  
navigating 161  
ring volume 101  
silent mode 103  
slide tone 103  
Speakerphone 47  
Speed Dial  
U
Understanding Your Phone 15  
closed view 18  
open view 16  
phone features 15  
setting up entries 71  
Standard Limited Warranty  
Stopwatch 138  
Storing a Number  
phone’s memory 66  
SIM card 67  
Understanding Your Phonebook 65  
adding a new contact 66  
finding a phonebook entry 69  
using contacts list 65  
USB settings 96  
191  
V
Videos 116  
Voice Commands 121  
menu 121  
Voice Mail 14, 89  
changing number 14  
Voice Note  
listening 86  
Voice Notes 82  
VoiceSignal  
checking phone status 126  
commands 122  
digit dial 123  
name dial 123  
name lookup 125  
open applications 125  
send text message 124  
W
Warranty Information 183  
Wi-Fi  
add new network 35  
available networks 27  
connection 25  
help 38  
quick connect 32  
security key 33  
192  

Transcend Information TS1GSDOM22V User Manual
Sony MZ R909 User Manual
Sony Ericsson R306C User Manual
Siemens SX66 User Manual
Seagate Computer Drive ST3400820A User Manual
Philips eXpanium eXp 313 User Manual
Panasonic DPG500EUC User Manual
Oregon Scientific RM106A User Manual
Oregon Scientific Multi Band Radio controlled Travel Alarm Clock RMB383A User Manual
Nokia Mobile Phones User Manual