Samsung SGH X800 User Manual

Depending on the software installed or your service provider or country,

some of the descriptions in this guide may not match your phone exactly.

* Depending on your country, your phone and accessories may appear

different from the illustrations in this guide.

Printed in Korea

Code No.:GH68-07499A

English. 09/2005. Rev 1.0

World Wide Web

http://www.samsungmobile.com

Drive safely at all times

Do not use a hand-held phone while driving. Park

the vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point (service

station) or near fuels or chemicals.

Important

safety

Switch off in an aircraft

Wireless phones can cause interference. Using them

in an aircraft is both illegal and dangerous.

precautions

Switch off the phone near all medical

equipment

Failure to comply with the following

precautions may be dangerous or illegal.

Hospitals or health care facilities may be using

equipment that could be sensitive to external radio

frequency energy. Follow any regulations or rules in

force.

Interference

Keep your phone away from small children

All wireless phones may be subject to interference,

which could affect their performance.

Keep the phone and all its parts, including accessories,

out of the reach of small children.

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any area and

always switch off your phone whenever it is forbidden

to use it, or when it may cause interference or danger.

Use only Samsung-approved accessories and

batteries. Use of any unauthorised accessories could

damage your phone and may be dangerous.

• The phone could explode if the battery is replaced

with an incorrect type.

• Dispose of used batteries according to the

manufacturer’s instructions.

Water resistance

Your phone is not water-resistant. Keep it dry.

Sensible use

Use only in the normal position (held to the ear). Avoid

unnecessary contact with the antenna when the phone

is switched on.

Qualified service

Only qualified service personnel may repair your

phone.

Emergency calls

For more detailed safety information, see "Health and

safety information" on page 90.

Key in the emergency number for your present

location, then press

•

Camera and camcorder

Use the camera module on your

phone to take a photo or record a

video.

About this Guide

This User’s Guide provides you with condensed

information about how to use your phone. To quickly

learn the basics for your phone, please refer to “Get

started” and “Step outside the phone.”

In this guide, the following instruction icons appear:

Special

features of your phone

Indicates that you need to pay careful attention

to the subsequent information regarding safety

or phone features.

•

Image editor

Crop, resize, rotate, and decorate

your photos.

Indicates that you can get more information on

the referenced page.

Indicates that you need to press the Navigation

keys to scroll to the specified option and then

select it.

→

MP3 player

Play MP3 music files using your

phone as an MP3 player.

Indicates a key on the phone. For example, [

]

[

]

File viewer

Indicates a soft key, whose function is displayed

< >

Open documents in various

formats on the phone without

corruption.

on the phone screen. For example, <Menu

•

Bluetooth

•

E-mail

Transfer media files and personal

data and connect to other devices

using free, wireless Bluetooth

technology. You can also use a

stereo Bluetooth headset to let you

enjoy music with high quality

stereo sound.

Send and receive e-mails with images, video,

and audio attachments.

•

Web browser

Access the wireless web to get up-

to-the-minute information and a

wide variety of media content.

•

Get personal with photo caller

See who’s calling you when their

very own photo displays.

•

Java

Enjoy Java™-based embedded

games and download new games.

Calendar

Keep track of your daily, weekly,

and monthly schedule.

Name card

Create name cards with your

number and profile.

Voice recorder

Record memos or sounds.

•

Multimedia Message Service (MMS)

Send and receive MMS messages with a

combination of text, images, video, and audio.

Browse the web...................................................... 17

Use Phonebook ...................................................... 17

Send messages...................................................... 18

View messages....................................................... 20

Use Bluetooth ........................................................ 21

Use a memory card................................................. 22

Contents

Unpack

Make sure you have each item

Your phone

Enter text

Buttons, features, and locations

Get started

AB, T9, Number, and Symbol mode

Call functions

First steps to operating your phone

Advanced calling features

Menu functions

Install and charge the phone..................................... 7

Power on or off........................................................ 8

Keys and display ..................................................... 9

Access menu functions ............................................ 11

Customise your phone............................................. 12

Make/Answer calls .................................................. 14

All menu options listed

Solve problems

Help and personal needs

Health and safety information

Step outside the phone

Begin with your camera, MP3 player, web, and other special

features

Index

Use the camera...................................................... 15

Play MP3s.............................................................. 16

Overview of menu functions

To access Menu mode, press <Menu> in Idle mode.

1 Call log

p. 30

3 Applications

p. 36

5 Messaging

p. 48

8 Camera

9 Settings

p. 70

p. 76

1 Recent contacts

2 Missed calls

3 Dialled calls

4 Received calls

5 Delete all

!p. 30

!p. 31

!p. 32

1 MP3 player

2 Voice recorder

3 Image editor

4 Java world

5 World clock

6 Alarm

7 Calculator

8 Converter

9 Timer

!p. 36

!p. 39

!p. 40

!p. 42

!p. 43

!p. 44

!p. 45

1 Create message

2 My messages

3 Templates

4 Delete all

5 Settings

!p. 48

!p. 51

!p. 55

!p. 56

!p. 61

1 Time and date

2 Phone settings

3 Display settings

4 Sound settings

5 Network services

6 Bluetooth

7 Security

8 Connection settings

9 Reset settings

!p. 76

!p. 77

!p. 78

!p. 79

!p. 80

!p. 82

!p. 85

!p. 86

!p. 87

6 Call time

6 Memory status

7 Call cost^*

6 File manager

!p. 61

2 Phonebook

!p. 32

1 Images

2 Videos

3 Music

4 Sounds

5 Other files

6 Memory card^**

7 Memory status

!p. 62

!p. 63

!p. 64

!p. 65

!p. 66

10 Stopwatch

11 Key management

12 SIM AT^*

1 Contacts list

2 Add new contact

3 Group

!p. 32

!p. 33

!p. 34

!p. 35

!p. 36

4 Speed dial

4 Browser

!p. 45

5 My namecard

6 Own number

7 Management

8 Service number^*

* Shows only if supported by your

SIM card.

** Shows only if a memory card is

inserted.

1 Home

!p. 45

!p. 47

!p. 48

2 Enter URL

3 Bookmarks

4 Saved pages

5 History

6 Clear cache

7 Browser settings

7 Calendar

!p. 66

Unpack

Your phone

Make sure you have each item

Buttons, features, and locations

Earpiece

Display

Camera lens

Phone

Travel Adapter

External

speaker

Camcorder

Microphone

Navigation keys

(Up/Down/Left/

Right)

Flash

Web access/

Confirm key

Right soft key

Power on/off/

Menu exit key

Delete key

Microphone

Camera key

Left soft key

External

display

Battery

User’s Guide

Headset jack

Dial key

Volume keys

MP3 player

control keys

You can obtain various accessories from

your local Samsung dealer.

Alphanumeric

The items supplied with your phone

and the accessories available at your

Samsung dealer may vary, depending

on your country or service provider.

keys

Special

function keys

Get started

First steps to operating your phone

Install the battery.

Plug the travel adapter

into the phone.

SIM card information

When you subscribe to a cellular network, you receive

a plug-in SIM (Subscriber Identity Module) card

loaded with your subscription details, such as your

PIN, and available optional services.

Install and charge the phone

Plug the adapter into a standard AC wall outlet.

Remove the battery.

Insert the SIM card.

When the phone is completely charged (the

battery icon becomes still), unplug the adapter

from the power outlet.

If the phone is already

on, first turn it off by

Make sure that the gold-

coloured contacts on the

card face down into the

phone.

holding [

Get started

Power on or off

Remove the adapter from the phone.

Switch on

1. Open the phone.

2. Press and hold [

the phone.

] to turn on

Do not turn on

the phone when

mobile phone

3. If necessary, enter the PIN and

Low battery indicator

press <OK>.

use is prohibited.

When the battery is low:

•

a warning tone sounds,

the low battery message displays, and

1. Open the phone.

Switch off

the empty battery icon

blinks.

If the battery level becomes too low, the phone

automatically turns off. Recharge your battery.

2. Press and hold [

Keys and display

Keys

Enter numbers, letters, and some special

characters.

In Idle mode, press and hold [1] to access

Perform the function indicated on the bottom

your voicemail server. Press and hold [

0] to

line of the display.

enter an international call prefix.

In Idle mode, access your favourite menus

Enter special characters.

directly.!p. 77

In Idle mode, press and hold [ ] to activate

or deactivate Quiet mode. Press and hold

In Menu mode, scroll through menu options.

[

] to enter a pause between numbers.

In Idle mode, launch the web browser.

In Menu mode, select the highlighted menu

option or confirm input.

Adjust the phone volume.

In Idle mode, with the phone open, adjust

the keypad tone volume. With the phone

closed, press and hold to turn on the

external display or flashlight.

Make or answer a call.

In Idle mode, retrieve the recent numbers

dialled, missed, or received.

In Idle mode, press and hold to turn on the

camera.

In Camera mode, take a photo or record a

video.

Delete characters from the display or an

item in an application.

End a call.

Press and hold to switch the phone on or off.

In Menu mode, cancel input and return the

phone to Idle mode.

Get started

Icons^*

Press and hold to launch or close the MP3

player.

Start playing music.

Received signal strength

Call in progress

Out of your service area; you

cannot make or receive calls

Move back to the previous file during

playback.

GPRS network

Connecting to GPRS network

Connected to Internet

Roaming network

New message

Skip to the next file during playback.

Stop playback.

New e-mail

Display

Layout

New voicemail

Icons

Call diverting feature active

display various icons.

Home Zone, if registered for the

appropriate service

Text and graphics

display messages,

instructions, and

Office Zone, if registered for the

appropriate service

information you enter.

Bluetooth active

Soft key function

Connected to Bluetooth hands-free

car kit or headset

Contacts

indicators

show the current functions

assigned to the soft keys.

Access menu functions

Synchronised with PC

MP3 playback in progress

MP3 playback paused

Memory card inserted

Alarm set

Use the soft

keys

The roles of the soft keys vary

depending on the function you are

using. The bottom line of the

display indicates their current role.

Call ringer set to vibrate

Quiet mode (Vibration)

Quiet mode (Mute)

Select

Back

Mute mode, during a call

Battery power level

* Depending on your country or service provider, the

icons shown on the display may vary.

Press the right

soft key to return

to the previous

menu level.

Press the left

soft key to select

the highlighted

option.

Get started

Customise your phone

Select an

option

1. Press the appropriate soft key.

2. Press the Navigation keys to

move to the next or previous

option.

1. In Idle mode, press <Menu

Display

and select Settings

settings Language

2. Select a language.

→

Phone

language

→

3. Press <Select>, <OK>, or

[

] to confirm the function

1. In Idle mode, press <Menu

displayed or option highlighted.

Call ringer

melody

and select Settings

settings

Ringtone

→

Sound

4. To exit, choose either of the

following methods:

→

Incoming call

→

•

Press <Back> to move up

one level.

2. Select a ringtone category.

3. Select a ringtone.

•

Press [

mode.

] to return to Idle

4. Press <Save>.

Use shortcuts Press the number key

corresponding to the option you

want. For the index numbers 10, 11

and 12, press [0], [ ], and [ ],

respectively.

You can set wallpaper for the idle

screen on each display.

You can set the Navigation keys as

shortcuts to access your favourite

menus.

Idle mode

wallpaper

shortcuts

1. In Idle mode, press <Menu

and select Settings Display

settings Wallpaper

→

1. In Idle mode, press <Menu

and select Settings Phone

settings Shortcuts

2. Select a key.

→

Main

→

display or Cover display

2. Select an image category.

3. Select an image.

→

3. Select a menu to be assigned to

the key.

4. Press <Select>.

5. Press <Save>.

You can switch the phone to Quiet

mode to avoid disturbing other

people.

Quiet mode

You can change the colour for the

display components, such as title

bars and highlight bars.

Menu mode

skin colour

Press and hold [ ] in Idle mode.

1. In Idle mode, press <Menu

and select Settings Display

settings Skin

2. Select a colour pattern.

→

Get started

Make/Answer calls

You can protect the phone against

unauthorised use with a phone

password. The phone will require

the password on power-up.

Phone lock

1. In Idle mode, enter an area

Make a call

code and phone number.

2. Press [ ].

1. In Idle mode, press <Menu

and select Settings

Security Change

password

2. Enter the default password,

3. To end the call, press [ ].

→

1. When the phone is ringing,

press [ ].

Answer a call

00000000, and press <OK>.

2. To end the call, press [ ].

3. Enter a new 4- to 8-digit

password and press <OK>.

Press [

Adjust the

volume during

a call

4. Enter the new password again

and press <OK>.

5. Select Phone lock

6. Select Enable

7. Enter the password and press

OK>.

Step outside the phone

Begin with your camera, MP3 player, web, and other

special features

1. In Idle mode, press and hold

] to turn on the camera.

Record a video

[

2. Press [1] to switch to Record

mode.

Use the camera

3. Press [ ] to start recording.

4. Press [ ] to stop recording.

The video is saved

1. Open the phone.

Take a photo

2. In Idle mode, press and hold

automatically.

[

]

to turn on the camera.

5. Press <Preview> to record

3. Aim the lens at the subject and

adjust the image.

another video.

4. Press [ ] to take a photo. The

photo is saved automatically.

1. In Idle mode, press <Menu

and select File manager

Videos Video clips

2. Select the video you want.

→

Play a video

5. Press <Preview> to take

→

another photo.

1. In Idle mode, press <Menu

and select File manager

Images Photos

2. Select the photo you want.

→

View a photo

→

Step outside the phone

Play MP3s

3. Press [ ] to select the files you

want and press <Select>.

Use these methods:

Copy MP3 files

to the phone

4. Press <Back> to return to the

•

Download from the wireless

web p. 45

MP3 player screen.

•

Download from a computer

using the optional Samsung PC

1. From the MP3 player screen,

press [ ].

Play MP3 files

Studio

!Samsung PC Studio

2. During playback, use the

following keys:

User’s Guide

•

Receive via Bluetooth!p. 85

Copy to a memory card and

insert the card into the phone.

•

: pauses or resumes

playback.

•

Left: moves back to the

previous file.

!p. 22

•

Right: skips to the next file.

Up: opens the play list.

1. In Idle mode, press <Menu

and select Applications

MP3 player

2. Press <Options> and select

Add music from Phone or

Memory card

Create a play

list

→

: adjusts the volume.

Down: stops playback.

→

Browse the web

Use Phonebook

Using a built-in web browser, you can get easy access

to the wireless web to get a variety of up-to-date

services and information and to enjoy downloads of

web content.

To the phone’s memory:

Add an entry

1. In Idle mode, enter a phone

number and press <Options>.

2. Select Save contact

a number type.

→

Phone

In Idle mode, press [ ].

→

Launch the

web browser

3. Specify contact information:

First name, Last name, Mobile,

Home, Office, Fax, Other, Email,

Caller ID, Ringtone, Group, and

Memo.

•

To scroll through browser items,

press [Up] or [Down].

Navigate the

web

•

To select an item, press [ ].

4. Press <Save> to save the

entry.

To return to the previous page,

press <Back>.

To the SIM card:

•

To move to the next page, press

1. In Idle mode, enter a phone

Options> and select Go

→

number and press <Options>.

Forward

2. Select Save contact

→

SIM.

To access browser options,

press <Options>.

3. Enter a name.

4. Press <Save> to save the

entry.

Step outside the phone

Send messages

1. In Idle mode, press

Contacts>.

Find an entry

1. In Idle mode, press <Menu

and select Messaging

Create message Text

message

2. Enter the message text.

3. Press <Options> and select

Save and send or Send only

4. Enter destination numbers.

5. Press [ ] to send the message.

Send a text

message (SMS)

2. Select an entry.

→

3. Scroll to a number and press

[

]

to dial, or press [ ] to

edit contact information.

1. In Idle mode, press <Menu

Create and

send a name

card

and select Phonebook

namecard

→

2. Specify your contact

information.

1. In Idle mode, press <Menu

and select Messaging

Create message

Multimedia message

2. Select Subject

Send a

3. Press <Save> to save the

→

multimedia

message

(MMS)

name card.

→

4. To send the name card to other

people, press <Options> and

select Send via

method.

→

a sending

3. Enter the message subject and

press [ ].

4. Select Image and video or

Sound

1. In Idle mode, press <Menu

and select Messaging

Create message Email

2. Select Subject

Send an e-mail

→

5. For Image and video, select

Add image or Add video and

add an image or video clip.

3. Enter the e-mail subject and

press [ ].

For Sound, select Add sound

and add a sound clip.

4. Select Message

5. Enter the e-mail text and press

6. Select File attached

6. Select Message

7. Enter the message text and

press [ ].

[

8. Press <Options> and select

7. Add image, video, sound, music

files, or document files.

Send

9. Enter destination numbers or

addresses.

8. Press <Options> and select

Send

10.Press [ ] to send the message.

9. Enter e-mail addresses.

10.Press [ ] to send the e-mail.

Step outside the phone

View messages

From the Inbox:

1. In Idle mode, press <Menu

When a notification appears:

View a text

message

and select Messaging

messages Inbox

→

1. Press <View>.

→

2. Select the message from the

Inbox.

2. Select an MMS message (

From the Inbox:

1. In Idle mode, press <Menu

View an e-mail

1. In Idle mode, press <Menu

and select Messaging My

messages Inbox

and select Messaging

messages Email inbox

2. Select an account.

→

2. Select an SMS message ( ).

3. Press <Yes> to download new

e-mails or headers.

When a notification appears:

1. Press <View>.

View a

multimedia

message

4. Select an e-mail or a header.

5. If you selected a header, press

2. Press <Options> and select

Options> and select

Retrieve

3. Select the message from the

Inbox.

Use Bluetooth

1. Access an application,

Phonebook File manager, or

Calendar

Send data

Your phone is equipped with Bluetooth technology

which enables you to connect the phone wirelessly to

other Bluetooth devices and exchange data with them,

talk hands-free, or control the phone remotely.

2. Scroll to an item.

3. Press <Options> and select

Send via

→

Bluetooth.

In Idle mode, press <Menu> and

Turn on

Bluetooth

select Settings

→

Bluetooth

→

4. Select a device.

Activation On

→

5. If necessary, enter the

Bluetooth PIN and press <OK>.

1. In Idle mode, press <Menu

and select Settings

Bluetooth My devices

Search for and

pair with a

Bluetooth

device

→

To receive data via Bluetooth, your

phone’s Bluetooth feature must be

active.

Receive data

→

Search for new devices

2. Select a device.

If necessary, press <Yes> to

confirm the reception.

3. Enter a Bluetooth PIN or the

other device’s Bluetooth PIN, if

it has one, and press <OK>.

When the owner of the other

device enters the same code,

pairing is complete.

Step outside the phone

Use a memory card

You can use an optional microSD memory card to

enlarge your phone’s memory capacity.

• Do not expose cards in a place

subject to electro static

discharge and/or electrical

noise.

• Frequent erasing and writing will

shorten a card’s lifespan.

Important

memory card

1. Remove the battery.

Insert a

memory card

• Do not remove a card from the

phone or turn off the phone

while data is being accessed or

transferred. This could result in

loss of data and/or damage to

the card or phone.

information

2. Slide a memory card into the

card slot, with the label side

face up.

• Do not subject cards to strong

shocks.

• Do not touch card terminals with

your fingers or metal objects. If

dirty, wipe the card with a soft

cloth.

• Keep cards away from small

children or pets.

Using a card adapter and a USB

card reader/writer, you can read

the card on a PC.

Use a card

adapter

1. Insert a memory card into a

card adapter, and then the

adapter into a card reader/

writer.

2. Plug the USB connecter of the

card reader/writer into the USB

port on your PC.

3. Access the appropriate memory

disk and copy to and from the

card.

If a file name is more than 52

characters, the file will not display

on the phone.

Using AB mode

Press the appropriate key until the character you want

appears on the display.

Enter text

AB, T9, Number, and Symbol mode

You can enter text for some features, such as

Messaging, Phonebook, or Calendar, using AB mode,

T9 mode, Number mode, and Symbol mode.

Characters in order displayed

Key

Upper case

Lower case

Changing the text input mode

•

Press and hold [ ] to switch between T9 mode

) and AB mode ( ). Depending on your

(

country, you may also be able to access an input

mode for your specific language.

•

Press [ ] to change case or switch to Number

mode (

Press and hold [ ] to switch to Symbol mode.

(Creating an SMS message with Uni-Code encoding)

2. Enter the whole word before editing or deleting

characters.

Tips for using AB mode

•

To enter the same letter twice or to enter a

different letter on the same key, wait for the cursor

to move to the right automatically or press [Right].

Then, enter the next letter.

3. When the word displays correctly, go to step 4.

Otherwise, press [

choices for the keys that you have pressed.

For example, Of and Me use [ ] and [ ].

0] to display alternative word

•

Press [ ] to insert a space.

Press the Navigation keys to move the cursor.

4. Press [ ] to insert a space and enter the next

word.

Press [C] to delete characters one by one. Press

and hold [C] to clear the display.

Tips for using T9 mode

•

Press [1] to enter periods or apostrophes

automatically.

Using T9 mode

T9 is a predictive text input mode that allows you to

key in any character using single keystrokes.

•

Press [ ] to insert a space.

Press the Navigation keys to move the cursor.

Entering a word in T9 mode

Press [

] to delete characters one by one. Press

and hold [

C] to clear the display.

1. Press [

each key once for each letter.

For example, press [ ], [ ], [

enter Hello in T9 mode.

2] to [9] to start entering a word. Press

Adding a new word to the T9 dictionary

This feature may not be available for some languages.

1. Enter the word that you want to add.

5], [5], and [6] to

T9 predicts the word that you are typing, and it

may change with each key that you press.

2. Press [0] to display alternative words for your key

Call functions

Advanced calling features

presses. When there are no more alternative

words, Add appears on the bottom line.

3. Press <Add>.

Making a call

1. In Idle mode, enter the area code and phone

number.

4. Enter the word you want using AB mode and press

<OK>.

Using Number mode

2. Press [ ].

Number mode enables you to enter numbers.

• Press [

C] to clear the last digit or press and hold

] to clear the whole display. You can move the

Press the keys corresponding to the digits you want.

cursor to edit an incorrect digit.

• Press and hold [ ] to enter a pause between

numbers.

Using Symbol mode

Symbol mode enables you to insert symbols.

Making an international call

Press

1. In Idle mode, press and hold [

appears.

]. The

character

display more symbols

select a symbol

[Up] or [Down].

2. Enter the country code, area code, and phone

number, then press [ ].

the corresponding

number key.

Redialling recent numbers

1. In Idle mode, press [ ] to display the list of

recent numbers.

clear the entered symbols

insert the symbols

[C].

<OK>.

2. Scroll to the number you want and press [ ].

Answering a call

Making a call from Phonebook

When you receive an incoming call, the phone rings

and displays the incoming call image.

Once you have stored a number in Phonebook, you

can dial the number by selecting it from Phonebook.

Press <Accept> or [ ] to answer the call.

!p. 32

Tips for answering a call

You can also use the speed dial feature to assign your

most frequently called numbers to specific number

•

When Anykey answer is active, you can press

any key, except for <Reject> and [ ]. p. 77

When Active flip is active, you can simply open

the phone. p. 77

Press <Reject> or [ ] to reject a call.

Press and hold [ ] to reject a call or mute the

ringer, depending on the Volume key

setting. p. 77

keys.!p. 34

•

You can quickly dial a number from the SIM card using

its location number assigned when stored.

•

1. In Idle mode, enter a location number and press

[

2. Press [Left] or [Right] to scroll through other

numbers.

3. Press <Dial> or [ ] to dial the number you want.

Viewing missed calls

If you have missed calls, the screen displays how

many calls you have missed.

Ending a call

Close the phone or press [ ].

1. Press <View>.

2. If necessary, scroll through the missed calls.

3. Press [ ] to dial the number you want.

Call functions

Placing a call on hold/Retrieving

Press <Hold> or <Retrieve> to place a call on hold

or retrieve the call.

Using the headset

Use the headset to make or answer calls without

holding the phone.

Connect the headset to the jack on the left side of the

phone. The button on the headset works as listed

below:

Making a second call

You can make another call if your network supports it.

1. Press <Hold> to put the call on hold.

2. Make the second call in the normal way.

3. Press <Swap> to switch between the calls.

Press

redial the last call

answer a call

end a call

and hold the button twice.

the button.

4. Press <Options> and select End held call to end

the call on hold.

the button.

5. To end the current call, press [ ].

Answering a second call

You can answer an incoming call while already on the

phone, if your network supports it and you have

Options during a call

You can access a number of functions during a call.

activated the call waiting feature.

!p. 81

Adjusting the volume during a call

1. Press [ ] to answer the call. The first call is

automatically put on hold.

Use [

] to adjust the earpiece volume during a call.

Press [ ] to increase the volume level and [ ] to

decrease the volume level.

2. Press <Swap> to switch between the calls.

3. Press <Options> and select End held call to end

•

Voice on/Voice off: switch off the phone's

microphone so that the other person on the phone

cannot hear you, or switch it back on.

the call on hold.

4. To end the current call, press [ ].

Mute keys/Send keys: switch the key tones on

or off.

Using the Speakerphone feature

Use the stereo speakers on the sides of the phone to

talk and listen with the phone a short distance away.

To communicate with answering machines or

computerised telephone systems, Send keys

must be selected.

Press [ ] to activate the Speakerphone feature. Press

the key again to switch back to the earpiece.

•

Send DTMF: send the DTMF (Dual tone multi-

frequency) tones as a group. The DTMF tones are

the tones used in phones for tone dialling,

sounding when you press the number keys. This

option is helpful for entering a password or an

account number when you call an automated

system, like a banking service.

Using In-call options

Press <Options> to access the following options

during a call:

•

Speaker on

feature or switch back to Normal mode.

Switch to headset Switch to phone: switch the

/Normal: turn on the Speakerphone

•

Phonebook: access the contact list.

call to a Bluetooth headset or hands-free car kit or

back to the phone.

End held call: disconnect the call currently on

hold.

•

Menu: access the phone's menu functions.

•

Transfer: transfer the currently active call to a

caller on hold. The two callers can talk to each

other, but you are disconnected from the call.

•

Join: set up a multi-party call by adding a caller

on hold to a currently active call. You can include

up to 5 people on a multi-party call.

Menu functions

All menu options listed

Select one: select one of multi-party call

participants. You can then use the following

options:

Call log (Menu 1)

Private: have a private conversation with one

multi-party call participant. The other participants

can converse with each other. After the private

conversation, select Join to return to the

multi-party call.

Use this menu to view the calls you have dialled,

received, or missed, and the length of calls. You can

also check the cost of your calls, if your SIM card

supports this function.

To access this menu, press <Menu> in Idle mode and

Remove: disconnect one multi-party call

participant.

select Call log

Recent contacts (Menu 1.1)

This menu displays the most recent calls dialled,

received, or missed.

Accessing a call record

1. Press [Left] or [Right] to move to another call

type.

2. Press [Up] or [Down] to scroll through the call list.

3. Press [ ] to view the details of a call, or [ ] to

dial a number.

Using call record options

Delete all (Menu 1.5)

While viewing call details, press <Options> to access

the following options:

Use this menu to delete all of the records in each call

type.

•

Call: edit the number and dial it.

1. Press [ ] to select the call types to be cleared.

2. Press <Delete>.

Save contact: save the number to Phonebook.

Send message: send an SMS or MMS message to

the selected number.

3. Press <Yes> to confirm the deletion.

Call time (Menu 1.6)

•

Delete: delete the selected call record or all

records.

This menu displays the time log for calls made and

received. The actual time invoiced by your service

provider will vary.

Missed calls (Menu 1.2)

This menu displays the most recent calls you did not

answer.

•

Last call time: check the length of your last call.

Total dialled calls: check the total length of all

the calls you have dialled.

Dialled calls (Menu 1.3)

•

Total received calls: check the total length of all

the calls you have received.

This menu displays the most recent calls you have

dialled.

To reset the call timers, press <Reset>. You need to

enter the phone password.

Received calls (Menu 1.4)

The password is preset to 00000000. You can

This menu displays the most recent calls you have

received.

change this password.!p. 85

Menu functions

Call cost (Menu 1.7)

Phonebook (Menu 2)

This network feature displays the cost of calls. This

menu is available only if supported by your SIM card.

Note that this is not intended to be used for billing

purposes.

You can store phone numbers on your SIM card and in

your phone’s memory. The SIM card and phone’s

memory are physically separate, but they are used as

a single entity called Phonebook.

•

Last call cost: check the cost of your last call.

To access this menu, press <Menu> in Idle mode and

Total cost: check the total cost of all of your calls.

If the total cost exceeds the maximum cost set in

Set max. cost, you must reset the counter before

you can make another call.

select Phonebook

Contacts list (Menu 2.1)

Use this menu to search for numbers in Phonebook.

•

Max. cost: check the maximum cost limit set in

Finding an entry

1. Enter the first few letters of the name that you

want to find.

Set max. cost

•

Reset counters: reset the cost counters.

Set max. cost: set the maximum cost authorised

for your calls.

2. Select the name from the list.

3. Scroll to a number and press [ ] to dial, or press

•

Price/Unit: set the price per unit that is applied

when the cost of your calls is calculated.

[

] to edit contact information.

Using Phonebook options

While viewing contact details, press <Options> to

access the following options:

•

Edit: edit contact information.

•

Send message: send an SMS or MMS message to

the selected number, or an e-mail to the selected

address.

•

Ringtone: assign a ringtone to alert you to a

call from the person.

Group: assign the contact to a caller group.

Memo: add a memo about the person.

•

Copy to: copy the contact to the phone’s memory

or to the SIM card.

3. Press <Save> to save the contact.

Send via: send the contact via SMS, MMS, e-mail,

or Bluetooth.

Storing a number on the SIM card

1. Select SIM

Delete: delete the selected contact.

2. Enter information about the contact.

Add new contact (Menu 2.2)

•

Name: assign a name.

Phone number: add a number.

Location: assign a location number.

Use this menu to add a new contact to Phonebook.

Storing a number in the phone’s memory

To assign a caller ID image, ringtone, or group,

the contact must be saved to the phone’s

memory.

1. Select Phone

2. Change the settings or enter information about the

contact.

3. Press <Save> to save the contact.

•

First name

Mobile Home

number in any type.

Last name: assign a name.

Office Fax Other: add a

•

Email: assign an e-mail address.

Caller ID: assign an image to alert you to a

call from the person.

Menu functions

•

Edit: change the group properties.

Group (Menu 2.3)

Send message: send an SMS, MMS, or e-mail

message to the group members you want.

Use this menu to organise your contacts in caller

groups.

•

Delete: delete the selected group or all groups.

Group members, however, will not be deleted from

Phonebook.

Creating a new caller group

1. Press <Options> and select Add

2. Enter a name for the group.

Speed dial (Menu 2.4)

3. Select the caller ID line and set an image.

4. Select the ringtone line and set a melody.

5. Press <Save> to save the group.

Use this menu to assign a speed dial number (2 to 9)

for 8 of your most frequently called numbers.

Assigning speed dial numbers

Adding members to a caller group

1. Select a group.

1. Select a key location from

for your voicemail server.

. Key

is reserved

2. Press <Add>.

2. Select a contact from the contact list.

3. Press [ ] to select the contacts to be added.

4. Press <Select>.

3. Select a number, if the contact has more than one

number.

Managing caller groups

Managing speed dial entries

While viewing the group list, press <Options> to

access the following options:

From the Speed dial screen, press <Options> to

access the following options:

•

View: display the members of the selected group.

•

Add: assign a number to an unassigned key.

Add: add a new group.

•

View: check the name and number assigned to a

key.

•

Exchange contact details: exchange name cards

with another person via Bluetooth.

•

Change: assign a different number to a key.

Delete: delete the name card.

Remove: clear the speed dial setting for a key.

Own number (Menu 2.6)

Dialling speed dial entries

Use this menu to check your phone numbers, or to

assign a name to each of the numbers. Changes made

here do not affect the actual subscriber numbers on

your SIM card.

In Idle mode, press and hold the appropriate key.

My namecard (Menu 2.5)

Use this menu to create a name card and send it to

other people.

Management (Menu 2.7)

Use this menu to manage Phonebook entries.

Saving your name card

•

Saving location: select a default memory location

for saving contacts. If you select Ask on saving

The procedure for creating your name card is the

same as the one for saving a phone number in the

the phone will ask you to select a memory location

each time you save a number.

phone’s memory.!p. 33

Using name card options

•

Copy all to: copy all of the contacts stored on the

SIM card to the phone’s memory, or vice versa.

After saving your name card, press <Options> to

access the following options:

Delete all: delete all of the contacts from your

phone’s memory, your SIM card, or both.

•

Edit: edit the name card.

Send via: send the name card via SMS, MMS,

e-mail, or Bluetooth.

Menu functions

•

Memory status: check the number of contacts

you have stored in the phone’s memory and on the

SIM card.

MP3 player (Menu 3.1)

Use this menu to enjoy music. First, you need to save

music files into your phone’s memory or on a memory

card. You can play MP3, AAC, and M4A files from the

phone’s memory, and MP3 files from the memory card.

Service number (Menu 2.8)

Use this menu to view the list of Service Dialling

Numbers (SDN) assigned by your service provider,

including emergency numbers and numbers for

directory enquiries. This menu is available if your SIM

card supports SDN.

To enjoy high quality music, you can use an optional

Bluetooth stereo headset.

Normal headsets are not compatible with the MP3

player.

1. Scroll to the number you want and press <View>.

Downloading or receiving music files

2. Press <Dial> or [ ].

Use these methods to save music files to your phone’s

memory:

•

Download from the wireless web

!p. 45

Applications (Menu 3)

Download from a computer using the optional

Use this menu to play Java games, play music files, or

edit photos. You can also use convenient features,

such as a voice recorder, alarm clock, calculator,

converter, and stopwatch.

Samsung PC Studio

Guide

!Samsung PC Studio User’s

•

Via an active Bluetooth connection

Copy to a memory card and insert the card into the

phone. p. 22

The downloaded or received files are stored in the

Music folder. p. 64

!p. 85

•

To access this menu, press <Menu> in Idle mode and

select Applications

Creating a play list

1. From the MP3 player screen, press <Options

Key

Function

Down

Stops playback.

and select Add music from

card

2. Press [ ] to select the files to be added and press

Select>.

→

Phone or Memory

Adjusts the volume level.

Turns 3D sound on or off.

Changes the playback animation.

Changes the repeat mode.

Changes the equaliser mode.

Changes the skin type.

Turns Shuffle mode on or off.

3. Press <Back> to return to the MP3 player screen.

Playing music files

1. From the MP3 player screen, press <Options

and select Play

2. Select Phone to use the phone speaker.

Select A/V headset to use a Bluetooth headset

and then search for and connect to the headset.

Using MP3 player options

From the MP3 player screen, press <Options> to

access the following options:

During playback, use the following keys:

Key

Function

•

Play/Pause: begin or pause playback.

Transfer to phone: switch the sound output to

the phone speaker.

Pauses or resumes playback.

Moves back to the previous file.

Skips to the next file.

Opens the play list.

Left

Right

•

Open: access the play list of the current album or

album list. On the album list, you can set up

multiple albums.

Menu functions

•

Go to Music: access the Music folder.

•

Details: access the file properties.

•

Send via: send the current file via e-mail or

Bluetooth.

Key management: manage the license keys you

have acquired.

Set as: set the file as your ringtone or as a

ringtone for a Phonebook entry.

Accessing the play list

From the MP3 player screen, press [Up].

Press <Options> to access the following options:

Activate key: get a license key when the key for

the selected DRM file expires.

•

Play: play the currently selected file.

Remove from playlist: remove the selected file

from the play list.

Add music from: add files to the play list.

Go to album list: access the album list.

Move to: move the selected file to another album.

Copy to: copy the selected file to another album.

Settings: change the default settings for playing

music files.

Repeat mode: select a repeat mode.

Shuffle: set the MP3 player to play music at

random.

Move track in playlist: move the selected file to

the position you want within the play list.

MP3 overrides other sounds: set the MP3 player

to continue playback even if you exit it.

•

Activate key: get a license key when the key for

the selected DRM file expires.

Equaliser: select an equaliser setting.

3D sound: turn 3D sound on or off.

Visualisation: change the playback animation.

Skin: select a skin type.

Remove: remove the selected file or all files from

the play list.

•

Details: access the file properties.

Key management: manage the license keys you

have acquired.

Volume: select a volume level.

2. Speak into the microphone.

Playing MP3 files with the phone closed

Press and hold [ ] to launch the MP3 player. Use the

following keys to control the MP3 player:

Press [ ] to pause or resume recording.

3. Press <Stop> or [Down] to end recording. The

voice memo is saved automatically.

Key

Function

4. Press [ ] to review the voice memo, or [Up] to

record a new memo.

Begins or pauses playback.

Moves back to the previous file.

Skips to the next file.

Adjusts the volume.

Playing a voice memo

1. From the Voice recorder screen, press <Options

and select Go to voice recorder files

2. Select a voice memo.

Locks the exposed keys when held down

to keep accidental presses from affecting

playback.

During playback, use the following keys:

Key

Function

Stops playback.

Pauses or resumes playback.

Moves backward in a memo.

Moves forward in a memo.

Adjusts the volume.

Left

Right

Voice recorder (Menu 3.2)

Use this menu to record voice memos. A voice memo

can be up to one hour long.

Down

Stops playback.

Recording a voice memo

1. Press [ ] to start recording.

Menu functions

4. Press <Done>.

Changing the recording mode

5. Press <Options> and select Save as

You can change the recording mode of the voice

recorder. The maximum recording time is determined

by this setting. Before recording a memo, press

6. Enter a new file name and press <OK>.

Transforming

1. Select a photo or take a new photo.

<Options> and select Settings

→

a recording mode:

•

Limit for multimedia message: record a voice

memo for adding to an MMS message.

2. Press <Options> and select Transform

→

option:

•

Limit for email: record a voice memo for adding

to an e-mail.

•

Resize: change the photo size.

Rotate: rotate the photo 90 degrees.

Flip: flip the photo.

Maximum 1 hour: record a voice memo of up to

one hour.

3. Press <Done>.

Image editor (Menu 3.3)

4. Press <Options> and select Save as

Use this menu to edit your photos using various

editing tools.

5. Enter a new file name and press <OK>.

Cropping

1. Select a photo or take a new photo.

Applying an effect

1. Press <Options> and select New image

or Take photo

→

Open

2. Press <Options> and select Crop

3. Move the cropping frame to the area of the image

you want.

2. Select a photo or take a new photo.

3. Press <Options> and select Effects

→

an effect

Press <Options> and select Resize to change the

frame size.

option.

4. Press <Options> and select Done

1. Select a photo or take a new photo.

5. Press <Options> and select Save as

2. Press <Options> and select Merge stamp. The

background photo appears in the image box next

6. Enter a new file name and press <OK>.

Adding visual features

3. Press <Options> and select Add image

You can decorate photos by adding a frame, an image,

or a note.

4. Add a photo by selecting or taking a photo. The

added photo appears in the image box next to

. This will be the stamp.

1. Select a photo or take a new photo.

2. Press <Options> and select Insert

→

a feature

5. Press <Options> and select Merge. The stamp

photo is added to the background photo as an

outline.

type.

3. Select an item or enter text to be inserted.

4. Adjust the position of the inserted item and press

6. Press <Options> to access the following stamp

<Done>.

edit options:

5. Press <Options> and select Save as

•

Resize: change the stamp size.

Move: change the position of the stamp.

Rotate: rotate the stamp.

Stamp color: change the stamp color.

Shadow on: apply a shadow to the stamp.

6. Enter a new file name and press <OK>.

Merging a stamp effect

This editing tool allows you to make an outline stamp

of a photo and then merge it with another photo. You

can use this tool to create your own photo postcard by

taking a photo of a handwritten message and merging

it with a photo.

7. When you have finished, press <Options> and

select Done

8. Press <Options> and select Save as

Menu functions

9. Enter a new file name and press <OK>.

•

Upgrade: upgrade the application to the latest

version.

Java world (Menu 3.4)

Send information via SMS: send the URL

containing the application via SMS.

Use this menu to access the embedded Java games

and downloaded Java applications.

Memory status: access memory information for

applications.

Accessing an embedded game

Settings: select a connection profile to be used for

applications requiring network access. You can also

1. Select My games

→

a game.

2. Press [ ].

add or edit a profile.

!p. 86

Using Java application options

World clock (Menu 3.5)

From the application list, press <Options> to access

the following options:

Use this menu to set your local time zone and find out

what time it is in another part of the world.

•

Start: launch the selected application.

Move to: move the application to another folder.

Viewing world time

Delete: delete the selected application or all

applications, except for the embedded games.

1. From the world map, press [Left] or [Right] to

scroll to the city you want. As the time line moves,

the time and date of the given zone display.

•

Lock/Unlock: lock the application to protect it

from being deleted, or unlock the application.

2. Press [ ] to save the city as your local time zone.

•

Details: access the application properties.

Applying daylight savings time

1. From the world map, press <Options> and select

Permissions: set permission settings for services

charging you additional costs, such as network

access and SMS.

Set daylight saving time

2. Press [ ] to select the time zones you want.

•

For a wake-up alarm, press <Confirm> or [ ].

3. Press <Save>.

Press any key, except <Confirm> and [ ], to

cause it to sound again after 5 minutes. You can do

this a maximum of 5 times.

Alarm (Menu 3.6)

Use this menu to set alarms. The alert type for a

normal alarm corresponds to the call alert type

settings. A wake-up alarm is not affected by your

sound settings.

Setting the alarm to ring even if the phone is

off

From the Alarm screen, select Auto power

→

On.

If the phone is off when it is time for the alarm to ring,

the phone switches on and sounds the alarm.

Setting an alarm

1. Select the type of alarm.

2. Set each alarm option:

Calculator (Menu 3.7)

•

Alarm: activate the alarm.

Alarm time: enter the time for the alarm to

ring.

Use this menu to perform basic arithmetic functions,

such as addition, subtraction, multiplication, and

division.

•

AM/PM: set AM or PM in 12-hour format.

Repeat: select a repeat option.

Alarm tone: select an alarm tone.

1. Enter the first number.

•

Press <.()> to insert a decimal point or

bracket.

•

Press

[

] or [

]

to move the cursor.

3. Press <Save>.

2. Press one of the Navigation keys to access the

math function you want.

Stopping an alarm

•

For a non-wake-up alarm, press any key.

3. Enter the second number.

Menu functions

4. Press [ ] to view the result.

Timer (Menu 3.9)

5. If necessary, repeat from step 2 to continue the

calculation.

Use this menu to set a period of time for the phone to

count down. The phone will sound an alarm when the

specified period of time has expired.

Converter (Menu 3.8)

Starting the timer

1. Press <Set>.

Use this menu for common conversions, such as

currency and temperature.

2. Enter the length of time you want to count down

1. Select a converter.

and press <OK>.

2. Press [Left] or [Right] to select the original unit

and press [Down].

3. Press [ ] to start counting down.

Stopping the timer

3. Enter the value to be converted and press [Down].

•

Press any key when the timer rings.

•

Press [ ] to insert a decimal point.

Press [ ] to change the temperature to above

zero (+) or below zero (-).

•

Press [ ] on the Timer screen to stop the timer

before it rings.

4. Press [Left] or [Right] to select the unit to which

you want to convert.

Stopwatch (Menu 3.10)

Use this menu to measure elapsed time. The

maximum time is 10 hours.

The equivalent value for the amount you entered

displays.

1. Press [ ] to start the stopwatch.

For the currency converter, you can view and set

currency rates by pressing <View rate>.

2. Press [ ] to check an interval. You can repeat this

step for a total of 4 intervals.

Key management (Menu 3.11)

Browser (Menu 4)

Use this menu to manage the license keys you have

acquired to activate media contents locked by DRM

systems.

The Wireless Application Protocol (WAP) browser on

your phone allows you to access the wireless web.

From the wireless web, you can access up-to-date

information and a wide variety of media content, such

as games, wallpapers, ringtones, and music files.

Press <Options> to access the following options:

•

View: open the corresponding media content.

To access this menu, press <Menu> in Idle mode and

Delete: delete the selected licence key.

select Browser

Go to My Messages: access the message

containing the media content.

Home (Menu 4.1)

•

Go to My Items: access the corresponding file

folder.

Use this menu to connect your phone to the network

and load the homepage of the wireless web service

provider. You can also press [ ] in Idle mode.

Details: access the properties of the licence key.

Navigating the web browser

SIM AT (Menu 3.12)

This menu is available if you use a SIM AT card that

supports SIM Application Tool kit menus and provides

additional services, such as news, weather, sports,

entertainment, and location services. Available

services may vary, depending on your service

provider’s plans. For details, see your SIM card

instructions or contact your service provider.

Press

scroll through browser

items

[Up] or [Down].

select a browser item

[

], or <Options> and

select Go to

Menu functions

•

To DesktopView/To SmartFitView: change the

display mode of the browser.

Press

return to the previous

page

•

Save: save the selected image or page.

Page details: access the page properties.

and select Go

→

Back.

move to the next page

<Options> and select Go

Browser options: change the various settings for

the browser.

→

Forward

Cache: change the cache mode or clear the cache.

A cache is a temporary memory that stores

recently accessed web pages.

Using page options

From any web page, press <Options> to access the

following options:

Cookies: change the cookie acceptance mode or

delete cookies. Cookies are pieces of personal

information sent to a web server while navigating

the web.

•

Go to: access the linked web page.

Go to homepage: return to the homepage.

Enter URL: enter a URL address manually.

Preferences: change the browser display and

sound settings.

Go: move backward or forward through pages in

history.

Certificates: access certificate information.

•

Reload: reload the current page with updated

information.

About browser: access version and copyright

information about the browser.

Bookmarks: bookmark the current page or access

the bookmark list.

Exiting the browser

Send URL: send the URL of the current page via

SMS or e-mail.

Press [ ] to end the network connection and exit the

browser.

Using bookmark options

Enter URL (Menu 4.2)

After saving an item, press <Options> to access the

following options:

Use this menu to manually enter a URL address and

access the associated web page.

•

Go to: access the bookmarked web page.

Go to homepage: access the homepage.

Enter URL: enter a URL address manually.

You can add the entered URL to the Bookmark list by

selecting Add bookmark

Bookmarks (Menu 4.3)

Edit bookmark: edit the URL address and title of

the bookmark.

Use this menu to save URL addresses in order to

quickly access web pages.

•

Add bookmark: add a new bookmark.

Adding a bookmark

Send URL: send the URL address of the bookmark

via SMS or e-mail.

1. Press <Add>. If a bookmark has already been

saved, press <Options> and select Add

•

Delete: delete the selected bookmark or all

bookmarks.

bookmark

2. Enter a title for the bookmark and press [Down].

Saved pages (Menu 4.4)

3. Enter a URL address and press <Save>.

You can access the list of pages you have saved while

online.

Accessing a bookmarked page

Selecting a bookmark item launches the web browser

and accesses the associated web page.

If you select a link on the page, the phone switches to

online to access the linked page.

Menu functions

History (Menu 4.5)

Create message (Menu 5.1)

You can access the list of pages you have accessed

recently.

Use this menu to create and send messages.

Text message (Menu 5.1.1)

Select a URL from the list to access the corresponding

web page.

Short Message Service (SMS) allows you to send or

receive text messages that may include simple

pictures, animated images, and melodies.

Clear cache (Menu 4.6)

1. Enter your message.

Use this menu to clear information stored in the cache.

The maximum number of characters allowed in a

message varies by service provider. If your

message exceeds the maximum number of

characters, the phone will split the message.

Browser settings (Menu 4.7)

Use this menu to select a connection profile to be used

for accessing the wireless web. You can also add or edit

2. Press <Options> to access the following options

a profile.!p. 86

for creating a message:

•

Insert: add a template, Phonebook entry, or

bookmark to text.

Add image/Add animation/Add melody:

attach a simple image, animated image, or

melody.

Attach: attach a Phonebook entry as a name

card or calendar data as a data format

attachment.

Messaging (Menu 5)

•

Use the Messaging menu to send and receive text

messages, multimedia messages, and e-mails. You

can also use push message and cell broadcast

message features.

•

To access this menu, press <Menu> in Idle mode and

select Messaging

•

Text style: change the text attributes.

3. When you have finished, press <Options> and

select Save and send or Send only

5. Enter the message text and press [ ].

6. Press <Options> to access the following options

for editing the message:

4. Enter a destination number.

•

Edit: edit the subject or text of your message.

Change image Change video Change

sound: replace an added item.

To send the message to more than one recipient,

fill in additional destination fields.

•

Add memory card: add a file stored on a

memory card, if inserted.

Add page: add pages. Move to each page by

pressing [Left] or [Right].

Delete page: delete an added page.

Edit page: change the duration of page display

or move the page forward among the other

pages.

5. Press [ ] to send the message.

Multimedia message (Menu 5.1.2)

Multimedia Message Service (MMS) delivers messages

containing a combination of text, image, video, and

audio, from phone to phone or from phone to e-mail.

•

1. Select the Subject line.

2. Enter the message subject and press [ ].

•

Attach: attach a Phonebook entry as a name

card or calendar data as a data format

attachment, or a document file stored in the

Other files folder.

3. Select the Image and video or Sound line and

add an image, a video, or a sound file.

• The maximum size allowed for a message can

differ, depending on your service provider.

• Depending on the file type or DRM (Digital

Rights Management) system, some files may

not be able to be forwarded.

Remove subject

Remove media Remove sound

remove an added item.

/Remove message

Remove:

4. Select the Message line.

Menu functions

7. When you have finished, press <Options> and

Depending on the file type or DRM (Digital

Rights Management) system, some files may

not be able to be forwarded.

select Send

8. Enter a phone number or e-mail address.

To send the message to more than one recipient,

fill in additional destination fields.

•

Other files: add document files stored in the

Other files folder.

Memory card: add files stored on a memory

card, if inserted.

Attach: attach name cards or calendar data as

data format attachments.

9. Press [ ] to send the message.

Email (Menu 5.1.3)

You can create and send e-mails that include text,

audio, and images. To use this feature, you need to

subscribe to an e-mail service and set up your e-mail

6. Press <Options> to access the following options

to edit the e-mail:

account and profile.!p. 59

•

Edit: edit the subject or text.

Remove subject Remove message: clear

the subject or text.

1. Select the Subject line.

2. Enter the subject of your e-mail and press [ ].

3. Select the Message line.

•

Remove attachment: delete the selected

attachment.

Remove all attachments: delete all

attachments.

4. Enter the e-mail text and press [ ].

5. Select the File attached line and select one of the

following options to add files:

7. When you have finished, press <Options> and

select Send

•

Add image/Add video/Add sound/Add

music: add media files stored in the phone’s

memory.

8. Enter an e-mail address.

•

Configuration message, containing network

parameters from your service provider.

To send the e-mail to more than one recipient, fill

in additional destination fields.

CB (Cell broadcast) message from your

service provider

9. Press [ ] to send the e-mail.

Delivery report for your sent messages

My messages (Menu 5.2)

• Depending on the DRM (Digital Rights

Management) system, messages having web

content may not be able to be forwarded.

Use this menu to access messages you have received,

sent, or which have failed in sending.

• A

icon next to a message means that the

Inbox (Menu 5.2.1)

message is of high priority. A grey-coloured

message icon indicates low priority.

This folder stores all of the messages you have

received, except for e-mails.

Using message options

Viewing a message

While viewing a message, press <Options> to access

the following options:

The following icons may appear on the message list to

show the message type:

SMS messages

•

SMS

MMS

•

Reply via: reply to the sender via SMS or MMS.

Forward: forward the message to other people.

Delete: delete the message.

MMS notification ( : Being retrieved,

: Failed to retrieve)

Move to phone/Move to SIM: move the

message between the SIM card and the phone’s

memory.

•

Voicemail

Push message from web servers.

Menu functions

•

Copy entry: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Protection: protect the message from being

deleted.

•

Copy media: save media content from the

message to your phone’s memory.

Details: access the message properties.

Configuration messages

Protection: protect the message from being

deleted. You can protect only those messages

stored in the phone’s memory.

•

Install: apply the configuration specified in the

message to your phone.

•

Delete: delete the message.

•

Block number: add the sender’s number to the

Block list to reject the messages from the sender.

Protection: protect the message from being

deleted.

MMS messages/MMS notifications

Push messages

•

Retrieve: retrieve the MMS message from the

MMS server.

•

Go to URL: connect to the URL specified in the

message.

Reply via text message: reply to the sender via

SMS.

•

Delete: delete the message.

Copy entry: extract URLs, e-mail addresses, or

phone numbers from the message.

Reply via multimedia message to: reply to the

sender via MMS.

•

Protection: protect the message from being

deleted.

•

Forward: forward the message to other people.

Delete: delete the message.

CB messages

Copy entry: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Save: save the message to the phone’s memory.

Delete: delete the message.

•

Copy media: save media content from the

message to your phone’s memory.

•

Copy entry: extract URLs, e-mail addresses, or

phone numbers from the message.

While viewing a message, press <Options> to access

the following options:

•

Send again: retry sending the message.

Delivery reports

Forward: forward the message to other people.

•

Delete: delete the report.

Copy entry: extract URLs, e-mail addresses, or

phone numbers from the message.

Copy entry: extract URL, e-mail addresses, or

phone numbers from the report.

•

Delete: delete the message.

•

Protection: protect the report from being deleted.

Protection: protect the message from being

deleted.

Drafts (Menu 5.2.2)

This folder stores messages you have saved to send at

a later time.

•

Details: access the message properties.

Sent messages (Menu 5.2.4)

When you select a message, it opens in Edit mode so

that you can edit and send the message.

This folder stores messages that you have sent.

While viewing a message, press <Options> to access

the following options:

Outbox (Menu 5.2.3)

This folder stores messages that the phone is

attempting to send or has failed to send.

•

Forward: forward the message to other people.

Copy entry: extract URLs, e-mail addresses, or

phone numbers from the message.

The following icons are available to show the message

status:

•

Delete: delete the message.

•

Being sent

Protection: protect the message from being

deleted.

Failed to send

Menu functions

•

Details: access the message properties.

5. Press [Left] or [Right] to view the previous or next

e-mail.

Email inbox (Menu 5.2.5)

Using e-mail options

This folder stores e-mails that you have received.

Viewing an e-mail

While viewing the e-mail or header, press <Options

to access the following options:

1. Select an e-mail account.

•

Retrieve: retrieve the body of the e-mail from the

e-mail server.

2. Press <Yes> when Check for new email

displays, or press <Options> and select Check

for new mail. The phone checks the e-mail server

and downloads new e-mails.

•

Reply: send a reply to the sender or to the sender

and all of the other recipients.

•

Forward: forward the e-mail to other people.

The following icons may appear on the list to show

the e-mail status:

Delete: delete the e-mail.

Add to filtering list: add the sender’s e-mail

address or subject to the Block list to reject

e-mails from that address or containing that

subject.

•

Retrieved from the server

Being retrieved

Failed to retrieve.

icon next to a message means that the

•

Copy entry: extract URLs, e-mail addresses, or

phone numbers from the e-mail.

message is of high priority. A grey-coloured

message icon indicates low priority.

Copy media: save the attached files from the

e-mail to your phone’s memory.

3. Select an e-mail or a header.

4. Press [ ] or [ ] to view other pages in the

e-mail.

•

Protection: protect the e-mail from being deleted.

Details: access the e-mail properties.

My folders (Menu 5.2.6)

Text templates (Menu 5.3.1)

Use this menu to create new folders and organise your

messages.

You can create SMS templates with the sentences you

use frequently so that you can retrieve and insert

them when composing an SMS message.

Creating a new folder

1. Press <Yes>.

Creating a template

1. Select an empty location.

2. Enter a message and press <OK>.

Using template options

2. Enter a folder name and press <OK>.

Using folder options

On the folder list, press <Options> to access the

following options:

From the template list, press <Options> to access

the following options:

•

Open: open the selected folder.

Add folder: add a new folder.

•

Edit: edit the selected template.

Send message: create and send a new message.

Delete: delete the selected template.

Add new: add a new template.

Rename folder: change the folder name.

Delete: delete the selected folder.

Templates (Menu 5.3)

Multimedia message templates (Menu 5.3.2)

Use this menu to make and use templates of

frequently used messages.

You can access embedded MMS templates or ones you

have saved so that you can use them in composing an

MMS message.

Menu functions

From the template list, press <Options> to access

the following options:

Settings (Menu 5.5)

Use this menu to set up various options for using the

messaging service.

•

View: open the selected template.

Edit: edit the template.

Text message (Menu 5.5.1)

Send: create and send a new message.

You can configure SMS settings.

Delete: delete the selected template or all

templates, except for the embedded ones.

•

Send settings: set up the options for sending

SMS messages:

Reply path: allow recipients to reply to you

through your SMS server.

Delete all (Menu 5.4)

Use this menu to delete messages in each message

folder all at once.

Delivery report: set the network to inform you

when your messages have been delivered.

1. Press [ ] to select the message folders to be

cleared.

Character support: select a character encoding

type. If you select Automatic, the phone switches

the encoding type from GSM-Alphabet to Uni-Code

if you enter a Unicode character. Use of Unicode

encoding will reduce the maximum number of

characters in a message to about half.

Pressing the key twice displays the message types

so that you can specify the ones to be cleared.

2. Press <Delete>.

3. Press [ ] to select the check box to delete

protected messages, and then press <Yes>.

If this menu is not shown, your phone provides

automatic character encoding by default.

4. Press <Yes> to confirm the deletion.

Bearer selection: select either GSM or GPRS

preferred, depending on your network.

•

Block number: store the phone numbers from

which you want to reject messages.

Hide address: set your address to be hidden from

the recipient’s phone.

•

Current profile: select an SMS setting profile.

Read reply: send a read-reply request along with

your messages.

Profile settings: set the properties of each

profile.

Priority: set the priority level of messages.

Service centre: store or change the number of

your SMS server.

Expiry date: set the length of time messages are

stored in the MMS server.

Default destination: enter the default

destination.

Delivery time: set a time delay before messages

are sent.

Default type: set the default message type. The

network can convert the messages into the

selected format.

Outgoing message size: select a maximum size

of attached items allowed for messages.

•

Retrieve settings: set up the options for

Default validity: set the length of time your

receiving MMS messages:

messages are stored in the SMS server.

Reject unknown senders: reject messages from

Setting name: enter a profile name.

unknown senders.

Allow adverts: accept advertisements.

Multimedia message (Menu 5.5.2)

Allow information: accept information

messages.

You can configure MMS settings.

•

Sending settings: set up the options for sending

MMS messages:

Allow reports: set the network to inform the

sender when a message has been delivered to you.

Delivery report: set the network to inform you

when your messages have been delivered.

Menu functions

Recep. in home network: determine if your

phone retrieves new messages automatically when

you are in your home service area.

•

Sending settings: set up the options for sending

e-mails:

Send copy to self: send a copy of your e-mails to

Reception when abroad: determine if your

phone retrieves new messages automatically when

you are roaming on another network.

your e-mail account.

Delivery receipt: set the network to inform you

when your e-mails have been delivered.

Reception within home network or abroad has the

following options:

Read reply: send a read-reply request along with

e-mails.

Manual: the phone displays notifications. Use

the Retrieve option to manually download new

messages.

Reply-To address: set an e-mail address to

receive read-reply messages from recipients.

Priority: select the priority level of e-mails.

Automatic: the phone automatically retrieves

messages from the server.

Include signature: attach your name, phone

number, a simple memo, or a tag line to your

e-mails.

Reject: the phone rejects all messages.

•

Profile: select a connection profile to be used for

MMS. You can also add or edit a profile. p. 86

Edit name: edit the name in your signature.

Edit number: edit the phone number in your

signature.

Email (Menu 5.5.3)

Edit note: edit the tag line in your signature.

You can configure default e-mail settings.

•

Reception settings: set up the options for

receiving e-mails:

You cannot change e-mail profile and account

settings while an e-mail is being sent or retrieved.

Check interval: determine how often the phone

checks the server for incoming e-mails. If you

select Do not notify, use the Check for new

email option to receive new e-mails manually.

Account settings: configure e-mail accounts

using different e-mail servers. Set the options for

each account:

Account name: enter a name for the currently

Read reply: determine whether or not the phone

sends a read-reply for incoming e-mails. If you

select Reply reminder, the phone asks you to

send a read-reply.

selected account.

User name: enter a user name.

Email address: enter your e-mail address.

SMTP server: enter the IP address or host name

of the outgoing e-mail server.

Reject if larger than: determine the maximum

size for incoming e-mails. Your phone will reject

e-mails that exceed the specified size.

SMTP port: enter the SMTP port number.

Connect to POP3 server first: connect to the

POP3 server before connecting to the SMTP

server to send e-mails.

Download method: set whether the phone

downloads e-mail headers only or e-mail headers

and bodies both.

Protocol type: select the protocol for the

incoming e-mail server. The remaining options

depend on the protocol type setting.

Leave copy of messages on server: leave

copies of e-mails on the e-mail server after

retrieving.

When the protocol type is POP3

•

Block list: specify e-mail addresses or subjects

you want to reject.

POP3 server: enter the IP address or host name

of the server that receives your e-mail.

POP3 port: enter the POP3 port number.

User ID: enter the POP3 user name.

Email account: set up an e-mail account and

select an account to be used.

Current account: select an account.

Menu functions

Password: enter the POP3 password.

Use SMTP authentication: enable SMTP

authentication, which requires the user to login

before sending e-mails.

Use SMTP authentication: enable SMTP

authentication, which requires the user to login

before sending e-mails.

Same as IMAP4: select if you want the SMTP

server to have the same parameters as the

IMAP4 server.

Same as POP3: select if you want the SMTP

server to have the same parameters as the POP3

server.

SMTP user ID: enter the SMTP user name.

SMTP password: enter the SMTP password.

Include attachments: select this option to

receive attachments with e-mails.

APOP login: connect to the server by using the

APOP login scheme.

Email retrieval limit: set the number of

headers you will retrieve from the server.

Secure connection: use a secure connection for

the e-mail service.

Secure connection: use a secured connection

for e-mail service.

When the protocol type is IMAP4

•

Email profile: select a connection profile to be

used for e-mail services. You can also add or edit a

IMAP4 server: enter the IP address or host

name of the server that receives your e-mail.

IMAP4 port: enter the IMAP4 port number.

User ID: enter the IMAP4 user name.

Password: enter the IMAP4 password.

profile.

!p. 86

Push message (Menu 5.5.4)

File manager (Menu 6)

The File manager menu allows you to access images,

videos, music files, and sound files stored in the

phone’s memory or on a memory card.

You can change the settings for receiving push

messages from the wireless web server.

•

Receive: set how your phone receives push

messages.

To access this menu, press <Menu> in Idle mode and

•

Black list: manage blocked server addresses.

select File manager

Broadcast (Menu 5.5.5)

Tips for Digital Rights Management

You can change the settings for receiving CB

messages.

As a result of the Digital Rights Management (DRM)

system, some of the media items you download from

the Internet or receive by MMS may require a license

key to access them.

•

Receive: select to receive CB messages, or not.

Channel list: indicate the channels from which

you wish to receive CB messages. Please contact

your service provider for further details.

You can acquire the key from the website which owns

the rights to the content; use the Activate key

option.

•

Language: select the preferred languages in

which CB messages display.

Note the following icons on the list:

•

: Forwardable item with a valid key.

: Forwardable item without a valid key.

: Unforwardable item with a valid key.

: Unforwardable item without a valid key.

Memory status (Menu 5.6)

Use this menu to view the amount of memory

currently in use in each folder.

Your service provider supports only count-based or

unlimited-access DRM files.

Menu functions

•

Set as: set the image as wallpaper for the displays

or as a caller ID image for a Phonebook entry.

Images (Menu 6.1)

This menu displays photos you have taken and images

you have downloaded, received in messages, or

imported from your computer.

Edit: edit the image using the Image editor if it is

a photo taken by the camera on the phone.

!p. 40

Viewing an image

1. Select an image folder.

2. Select an image.

•

Activate key: get a license key when the key for

the selected DRM file expires.

•

Delete: delete the file.

Viewing a slide show

Rename: change the file name.

Move to: move the file to another folder or to a

memory card.

You can view your photos as a slide show, a sequential

presentation of each photo in the current folder.

•

Copy to memory card: copy the file to a memory

card.

1. Select Photos

2. Press <Options> and select Slide show

Visible to Bluetooth: share the file or all files

with other Bluetooth devices.

3. Select an interval option. The slide show begins.

4. Press <Stop> to stop the slide show.

•

Protection: protect the file from being deleted.

Using image options

Details: access the file properties.

While viewing an image, press <Options> to access

the following options:

Key management: manage the license keys you

have acquired.

•

List: return to the image list.

Send via: send the file via MMS, e-mail, or

Bluetooth.

From a video screen, press <Options> to access the

following options:

Videos (Menu 6.2)

This menu displays video clips you have recorded,

downloaded, received in messages, or imported from

your computer.

•

List: return to the video list.

Send via: send the file via MMS, e-mail, or

Bluetooth.

Video clips recorded on other devices, such as

camcorders, may not play correctly.

•

Set as wallpaper: set the video clip, if saved as a

3gp file, as wallpaper for the main display.

Playing a video clip

1. Select a video folder.

2. Select a video clip.

Activate key: get a license key when the key for

the selected DRM file expires.

•

Delete: delete the file.

During playback, use the following keys:

Rename: change the file name.

Move to: move the file to another folder or to a

memory card.

Key

Function

Pauses or resumes playback.

Moves backward in a file.

Skips forward in a file.

Adjusts the volume.

Stops playback.

•

Copy to memory card: copy the file to a memory

card.

Left

Right

Visible to Bluetooth: share the file or all files

with other Bluetooth devices.

•

Protection: protect the file from being deleted.

Down

Details: access the file properties.

Key management: manage the license keys you

have acquired.

Using video options

Menu functions

•

Send via: send the file via MMS, e-mail, or

Bluetooth.

Music (Menu 6.3)

This menu displays MP3 files you have downloaded or

imported from your computer.

Set as: set the sound as your call ringtone or a

ringtone for a Phonebook entry.

Select a file. The MP3 player opens.

!p. 37

Activate key: get a license key when the key for

the selected DRM file expires.

When you play a file from this menu, without first

adding it to the play list in the MP3 player,

background play is not supported.

•

Delete: delete the file.

Rename: change the file name.

Sounds (Menu 6.4)

Move to: move the file to another folder or to a

memory card.

This menu displays voice memos you have recorded,

and sound files you have downloaded, received in

messages, or imported from your computer.

•

Copy to memory card: copy the file to a memory

card.

Visible to Bluetooth: share the file or all files

with other Bluetooth devices.

Playing a sound clip

1. Select a sound folder.

•

Protection: protect the file from being deleted.

2. Select a sound clip. For a voice memo, see Voice

Details: access the file properties.

recorder

!p. 39

Key management: manage the license keys you

have acquired.

Using sound options

From a sound screen, press <Options> to access the

following options:

•

List: return to the sound list.

Other files (Menu 6.5)

Key

Function

Use this menu to view various document files and files

stored in the phone’s memory without corruption.

Available file formats are DOC, XLS, PPT, PDF, and TXT.

Returns to the previous page.

Rotates the document.

Moves to the next page.

Moves to the last page.

Viewing a file

Select a file. Picsel File Viewer runs to open the

document.

Changes the display to Full screen

view or Normal screen view.

• Depending on the file size or memory capacity of

Picsel File Viewer, a file may not open properly.

• If a document file contains languages

unsupported by Picsel File Viewer, the content of

the document will not display correctly.

Using document options

While viewing a document, press <Options> to

access the following options:

Use the following keys to view the document:

•

Full screen view: change the display to Full

screen view.

Key

Function

•

Zoom: zoom in or out.

Up/Down/

Left/Right

Pans around the page.

Fit to: fit the document to the page size, screen

width, or screen height.

Zooms in or out.

•

Go to: move to another page of the document.

Fits the document to the page size.

Returns to the first page.

Rotate: rotate the document.

Screen panning

/Normal panning: change the

panning mode to by screen or by preset pixel.

Menu functions

•

Send via: send the file via MMS, e-mail, or

Bluetooth.

Your phone is preset to use FAT16-formatted

memory cards. If you insert a FAT32-formatted

memory card, the phone will ask you to reformat the

memory card. If you do not, you will not be able to

access the card from the phone.

•

Move to memory card: move the file to a

memory card.

Copy to memory card: copy the file to a memory

card.

Memory status (Menu 6.7)

•

Delete: delete the selected file.

Use this menu to view memory information for media

items in the phone’s memory or on a memory card.

For the phone’s memory, press [Left] or [Right] to

view the memory status by size or number of items.

Rename: change the file name.

Visible to Bluetooth: share the file or all files

with other Bluetooth devices.

•

Protection: protect the file from being deleted.

Details: access the file properties.

Calendar (Menu 7)

The Calendar menu enables you to keep track of your

schedule.

Shortcuts: view the functions of the keys you can

use in Picsel File Viewer.

Memory card (Menu 6.6)

To access this menu, press <Menu> in Idle mode and

select Calendar

Use this menu to access the files stored in a memory

card. This menu is shown only when a memory card is

inserted into the phone.

Consulting the calendar

When you enter the Calendar menu, the calendar in

Month view appears with today’s date indicated by a

blue box.

Selecting a day

Creating an event

•

Press [Left] or [Right] to move by day.

Press [Up] or [Down] to move by week.

You can store scheduled events, anniversaries,

memos, and To do items on the calendar. More than

one event per day can be stored.

Press [

] to move by month.

Entering a new scheduled event

1. Select a date on the calendar.

Using calendar options

Press <Options> to access the following options:

2. Press <Options> and select Create

→

Schedule.

•

View mode: change the view mode of the

calendar. p. 69

Create: add a new event.

3. Enter information or change the settings:

•

Subject: enter a title for the event.

Details: enter event details.

•

!next section

Go to: select today’s date or enter a specific date.

Start date and Start time: enter the starting

date and time for the event.

AM/PM: select AM or PM in 12-hour time

format.

End date and End time: enter the ending date

and time for the event.

AM/PM: select AM or PM in 12-hour time

format.

Location: enter information about the event

location.

Sort by: sort items by type of event.

Delete: delete the items stored on the calendar by

•

using various deleting options.

You can delete recurring events in Day view only.

•

Missed alarm events: view events whose alarms

you have missed.

Memory status: access memory information for

the event items stored on the calendar.

Alarm: set an alarm for the event.

Menu functions

•

Before: set how long before the event the

alarm is to alert you.

•

AM/PM: select AM or PM in 12-hour time

format.

•

Alarm tone: select an alarm tone.

Repeat: set the event to recur and select a

repeat unit.

•

Alarm tone: select an alarm tone.

Repeat every year: set the phone to remind

you of the anniversary every year.

•

Until: set the ending date, if the event will

recur.

4. Press <Save> to save the event.

Entering a memo

4. Press <Save> to save the event.

1. Select a date on the calendar.

2. Press <Options> and select Create

3. Enter a memo and press <Save>.

Entering a new anniversary

1. Select a date on the calendar.

2. Press <Options> and select Create

→

Memo.

→

Entering a To do item

1. Select a date on the calendar.

2. Press <Options> and select Create

Anniversary

3. Enter information or change the settings:

To do

•

Occasion: enter information about the

anniversary.

3. Enter information or change the settings:

•

To do: enter information about the item.

Start date: enter the starting date.

Due date: enter the ending date.

•

Date: enter the date.

Alarm: select to set an alarm for the

anniversary.

Before: set how long before the event the

alarm is to alert you.

Alarm time: enter the time for the alarm to

ring.

•

Select priority: select a priority level.

4. Press <Save> to save the event.

•

View mode: change the view mode of the

calendar.

Viewing an event

Once you have scheduled events, the event icons and

the number of events for a specific day appears at the

bottom of the calendar.

•

Delete: delete the event.

Memory status: access memory information for

the events stored on the calendar.

•

Scheduled event

To do item

•

Anniversary

Memo

Viewing an event in a different mode

You can change the calendar display to Day view or

Week view. Press <Options> and select View mode

Accessing an event

1. Select a date on the calendar to display the events

for the day.

→

a view mode.

Day view

2. Select an event to view its details.

You can view events for the selected date. Select an

event to view its details.

3. Press [Left] or [Right] to access the other events

scheduled for the selected day.

The following icons may display to indicate the event

status:

Using event options

While viewing an event, press <Options> to access

the following options:

•

Alarm set

Recurring event

•

Edit: edit the event.

To do item priority (Red: high, Blue: normal,

Grey: low)

Create: add a new event.

Send via: send the event via SMS, MMS, e-mail,

or Bluetooth.

•

Completed To do item

Menu functions

Week view

Taking a photo

You can view events for the selected week. A cell on

the timetable indicates the presence of a schedule

item. Select a cell in the day you want.

You can take photos in various modes. The camera

produces JPEG photos.

When you take a photo in direct sunlight or in bright

conditions, shadows may appear on the photo.

Camera (Menu 8)

You can use the camera module embedded in your

phone to take photos and record videos.

Taking a photo with the phone open

1. Access the Camera menu or press and hold [

]

to turn on the camera.

2. Adjust the image to be captured.

To access this menu, press <Menu> in Idle mode and

•

Press < > to access camera options.

next section

Use the keypad to change the camera settings

or switch to other modes. p. 72

3. Press [ to take a photo. The photo is saved in

the Photos folder.

select Camera, or press and hold [

• Do not take photos of people without their

permission.

• Do not take photos in a place where cameras are

not allowed.

• Do not take photos in a place where you may

interfere with another person’s privacy.

•

]

4. To

Press

Options>.!p. 72

access photo options

delete the photo

[C] and then <Yes>.

return to Capture mode

<Preview>.

•

Settings: change the default settings for taking a

photo.

Using camera options in Capture mode

In Capture mode, press < > to access the following

options:

Size: select an image size.

Quality: select an image quality setting.

Viewfinder: select a preview screen.

Shutter sound: select the sound that you hear

•

Record video: switch to Record mode.

Shooting mode: take a photo in the following

modes:

when you press the shutter release, [

Single shot: take a photo in Normal mode. You

can select whether or not the camera automatically

saves a photo.

Zoom sound: turn the sound effect for zooming

on or off.

Multi-shot: take a series of action stills. You can

select the number of photos the camera will take

and the shooting speed.

Brightness sound: turn the sound effect for

brightness adjustment on or off.

White balance: adjust the colour balance of the

image. You can make your photo appear warmer

or cooler.

Mosaic shot: take several stills and save them in

one frame. You can select the layout.

•

Effects: change the colour tone or apply a special

effect.

ISO: change the ISO setting, which controls the

sensitivity of your camera. For low light situations,

select a higher ISO number. The higher the ISO

number, the faster the camera shutter functions

and the more sensitive the camera is to light.

Higher ISO settings may bring some distortion to

an image.

•

Frames: apply a decorative frame.

Flash: determine the use of the flash.

Timer: set a time delay before the camera takes a

photo.

•

Go to photos: access the Photos folder.

Menu functions

Save: select the memory location to store photos,

if a memory card is inserted.

Key

Function

Changes the colour tone or applies a

special effect.

•

Shortcuts: view the functions of the keys you can

use in Capture mode.

Changes the ISO setting.

Selects a decorative frame.

Sets the timer.

Using the keypad in Capture mode

You can use the keypad to customise your camera

settings in Capture mode.

Key

Function

Goes to the Photos folder.

Changes the preview screen.

Determines the use of the flash.

Changes the white balance.

Left/Right

Up/Down

Adjusts the image brightness.

Zooms in or out.

Flips the image vertically.

Shows the mirror image.

Using photo options

Switches to Record mode.

!p. 73

After saving a photo, press <Options> to access the

following options:

Changes the image size.

•

View: access one of the multi-shot photos.

Changes the image quality.

Changes the shooting mode.

Take another: return to Capture mode.

Send via: send the file via MMS, e-mail, or

Bluetooth.

•

Set as: set the photo as wallpaper for the displays

or as a caller ID image for a Phonebook entry.

4. Press [

]

to take a photo. The photo is

automatically saved.

Edit: edit the photo using the Image editor.

Recording a video

!p. 40

You can record a video of what is displayed on the

camera screen and save it.

•

Delete: delete the file.

Rename: change the file name.

Go to photos: access the Photos folder.

Recording a video with the phone open

!p. 62

1. In Capture mode, press [

1].

Protection: protect the file from being deleted.

2. Adjust the image to be captured.

Details: access the file properties.

•

Press < > to access camera options.

next section

Use the keypad to change the camera settings

or switch to other modes. p. 75

Taking a photo with the phone closed

1. Press and hold [

2. If necessary, press [

] to highlight

3. Press [

4. Press [

]

to start recording.

3. To

Press

]

or < > to stop recording. The video is

flip the image vertically

show the mirror image

turn the flash on or off

adjust the brightness

zoom in or out

[

automatically saved in the Video clips folder.

5. To Press

and hold [

play back the video clip

access video options

[

Options>.!p. 75

Menu functions

Select Normal to record a video within the limit of

the currently available memory. The video clip is

saved in MP4 format.

5. To

Press

delete the video clip

return to Record mode

[C] and then <Yes>.

Size: select a frame size.

<Preview>.

Quality: select an image quality setting.

Viewfinder: select a preview screen.

Audio record: record audio with a video clip.

Using camera options in Record mode

In Record mode, press < > to access the following

options:

Zoom sound: turn the sound effect for zooming

on or off.

•

Take photo: switch to Capture mode.

Effects: change the colour tone or apply a special

effect.

Brightness sound: turn the sound effect for

brightness adjustment on or off.

•

Flash: determine the use of the flash.

White balance: adjust the colour balance of the

image. You can make your video appear warmer or

cooler.

Timer: set a time delay before the camera starts

recording.

•

Go to Videos: access the Video clips folder.

Save: select the memory location to store video

clips, if a memory card is inserted.

Settings: change the following settings for

recording a video:

•

Shortcuts: view the functions of the keys you can

use in Record mode.

Recording mode: select a video recording mode.

Select Limit for MMS/Wallpaper to record a

video suitable for messaging or for setting as

wallpaper. The video clip is saved in 3GP format.

Using the keypad in Record mode

Key

Function

You can use the keypad to customise your camera

settings in Record mode:

Goes to the Video clips folder.

Changes the preview screen.

Determines the use of the flash.

Changes the white balance.

Key

Function

Left/Right

Up/Down

Adjusts the image brightness.

Zooms in or out.

Flips the image vertically.

Shows the mirror image.

Using video options

After saving a video clip, press <Options> to access

the following options:

Switches to Capture mode.

!p. 70

•

Record another: return to Record mode.

Changes the frame size.

Send via: send the file via MMS, e-mail, or

Bluetooth.

Changes the image quality.

•

Set as wallpaper: set the video clip, if saved as a

3GP file, as wallpaper for the main display.

Changes the video recording mode.

Changes the colour tone or applies a

special effect.

•

Delete: delete the file.

Rename: change the file name.

Mutes or unmutes audio.

Sets the timer.

Go to videos: access the Video clips folder.

!p. 63

Menu functions

•

Protection: protect the file from being deleted.

Settings (Menu 9)

•

Details: access the file properties.

The Settings menu provides you with various setting

options to customise the phone to your preferences

and needs. You can also reset the settings to their

default status.

Recording a video with the phone closed

1. Press and hold [

2. If necessary, press [

] to highlight

To access this menu, press <Menu> in Idle mode and

3. To

Press

select Settings

flip the image vertically

show the mirror image

turn the flash on or off

adjust the brightness

zoom in or out

[

Time and date (Menu 9.1)

Use this menu to change the time and date displayed

on your phone. Before setting the time and date,

specify your time zone in the World clock menu.

and hold [

[

!p. 42

•

Set time: enter the current time.

AM/PM: select AM or PM in 12-hour time format.

Time format: select a time format.

Set date: enter the current date.

•

4. Press [

5. Press [

]

to start recording.

to stop recording. The video clip is

•

automatically saved.

•

Calendar starting day: set which day of the

week the calendar starts with.

•

Remove: deactivate the shortcut assignment to

the selected key.

Phone settings (Menu 9.2)

Many different features of your phone’s system can be

customised to suit your preferences.

Remove all: deactivate all shortcut assignments.

Volume key (Menu 9.2.4)

Language (Menu 9.2.1)

Use this menu to set whether the phone mutes the call

Use this menu to select one of several languages for

the display text.

ringer or rejects a call if you press and hold [

when a call comes in.

]

Greeting message (Menu 9.2.2)

Extra settings (Menu 9.2.5)

Use this menu to enter the greeting that is displayed

briefly when the phone is switched on.

You can turn the automatic redialling or answering

feature on or off, and lock the external keys.

Shortcuts (Menu 9.2.3)

•

Auto redial: set the phone to make up to ten

attempts to redial a phone number after an

unsuccessful call.

You can use the Navigation keys as shortcuts to access

specific menus directly from Idle mode. Use this menu

to assign a shortcut to a key.

•

Active flip: answer an incoming call by opening

the phone.

Assigning a shortcut menu

1. Select a key to be used as a shortcut key.

2. Select the menu to be assigned to the key.

Using shortcut options

Anykey answer: answer an incoming call by

pressing any key, except [ ] and <Reject>.

Cover keypad lock: lock the exposed keys to

keep accidental presses from affecting your

phone’s operation when the phone is closed.

Press <Options> to access the following options:

•

Change: assign or change a shortcut menu.

Menu functions

Skin (Menu 9.3.3)

Display settings (Menu 9.3)

You can select a skin colour pattern for Menu mode.

Use this menu to change settings for the display and

backlight.

Brightness (Menu 9.3.4)

Wallpaper (Menu 9.3.1)

You can adjust the brightness of the display for

varying lighting conditions.

You can set up the idle screen on both displays.

•

Main display: select an image or video clip to be

displayed on the main display.

Backlight (Menu 9.3.5)

You can select the length of time the backlight stays

on or the length of time the display stays on in Dim

mode, in which the backlight is off.

Cover display: select an image to be displayed on

the external display.

Text position: select a text position. If you don’t

•

Main display normal: select the length of time

the backlight stays on.

want to display text in Idle mode, select Off

•

Text mode: select a font style.

•

Main display dim: select the length of time the

display stays on in Dim mode after the backlight

turns off. After a specified time, the display turns

off.

Text colour: select a font colour.

Graphic logo: set the phone to display a graphic

icon instead of the service provider’s logo on the

idle screen. This is only available if a graphic icon

has been received in a message.

Dialling display (Menu 9.3.6)

Use this menu to select a font colour for the numbers

entered while dialling.

Main menu style (Menu 9.3.2)

You can select a display style for the main menu

screen.

Show caller information (Menu 9.3.7)

Message tone (Menu 9.4.3)

Use this menu to set the phone to display missed call

notifications with the most recently missed caller’s

information. To set the external display to show caller

Use this menu to change the sound settings for

incoming SMS messages, MMS messages, e-mails,

and CB messages individually.

information, select With cover display

•

Tone: select one of several message tones.

Alert type: specify how you are to be informed

when a message comes in.

Sound settings (Menu 9.4)

Use this menu to customise various sound settings.

•

Repetition: specify how often the phone informs

you of a new message.

Incoming call (Menu 9.4.1)

Use this menu to change the sound settings for

incoming calls.

Power on/off (Menu 9.4.4)

Use this menu to select the melody that the phone

sounds when it is switched on or off.

•

Ringtone: select a ringtone to be used for the call

ringer.

Flip tone (Menu 9.4.5)

•

Volume: select a ringtone volume.

Use this menu to select the tone that the phone

sounds when you open or close the phone.

Alert type: specify how you are to be informed of

incoming calls.

Quiet mode (Menu 9.4.6)

Keypad tone (Menu 9.4.2)

Use this menu to set how the phone acts to alert you

to a specific event while in Quiet mode.

Use this menu to select the tone that the phone

sounds when you press a key.

You can adjust the keypad tone volume using [

in Idle mode.

]

Menu functions

1. Select a call diverting option:

Extra tones (Menu 9.4.7)

•

Divert always: divert all calls.

Busy: divert calls when you are on another

call.

No reply: divert calls when you do not answer

the phone.

Unreachable: divert calls when you are not in

an area covered by your service provider or

when your phone is switched off.

Cancel all: cancel all call diverting options.

Use this menu to customise additional tones for the

phone.

•

Minute minder: set the phone to beep every

minute during an outgoing call to keep you

informed of the length of your call.

•

Connection tone: set the phone to beep when an

outgoing call connects to the system.

Alert on call: set the phone to beep when you

receive a new message or when the time for an

alarm comes during a call.

•

2. Select the type of calls to be diverted.

3. Select Activate. To deactivate call diverting, select

•

Indicative tone: set the phone to beep when you

have made a mistake or something wrong happens

on the phone.

Deactivate

4. Move to the Divert to line.

5. Enter the number to which calls are to be diverted.

Network services (Menu 9.5)

6. If you selected No reply, move to the Seconds

line and select the length of time the network

delays before diverting a call.

Use this menu to access network services. Please

contact your service provider to check their availability

and subscribe to them, if you wish.

7. Press <Select>.

Call diverting (Menu 9.5.1)

This network service reroutes incoming calls to a

phone number that you specify.

Call barring (Menu 9.5.2)

Call waiting (Menu 9.5.3)

This network service allows you to restrict your calls.

1. Select a call barring option:

This network service informs you when someone is

trying to reach you while you are on another call.

1. Select the type of calls to which call waiting option

will apply.

•

All outgoing calls: prohibit all outgoing calls.

International: prohibit international calls.

International except home: only allow calls

to numbers within the current country when

you are abroad, and to your home country.

All incoming calls: prohibit incoming calls.

Incoming while abroad: prohibit incoming

calls when you use your phone outside of your

home country.

2. Select Activate and press <Select>. To

deactivate call waiting, select Deactivate

Network selection (Menu 9.5.4)

•

This network service allows you to either automatically

or manually select the network to be used while

roaming outside of your home area. You can select a

network other than your home network only if there is

a valid roaming agreement between the two.

•

Cancel all: cancel all call barring settings,

allowing calls to be sent and received normally.

Change barring password: change the call

barring password obtained from your service

provider.

Caller ID (Menu 9.5.5)

This network service allows you to prevent your phone

number from being displayed on the phone of the

person being called. If you select Default, the phone

will use the default setting provided by the network.

2. Select the type of calls to be barred.

3. Select Activate. To deactivate call barring, select

Some networks may not allow you to change this

setting.

Deactivate

4. Enter the call barring password supplied by your

service provider and press <Select>.

Menu functions

•

Default group: enable the default CUG, if you

have set one with your service provider. When

making a call, you are given the option of using

your default CUG, instead of selecting one from the

list.

Voice mail server (Menu 9.5.6)

Use this menu to store the number of the voicemail

server and access your voicemails.

You must store the voicemail server number before

accessing the server. Your service provider can give

you the number.

Band selection (Menu 9.5.8)

For the phone to make and receive phone calls, it

must register with an available network. Your phone

can handle any of the following types of networks:

GSM 1900 and Combined GSM 900/1800.

•

Connect to voice server: connect to the

voicemail server to listen to your messages.

Voice server number: enter the voicemail server

number.

The country where you purchased your phone

determines the default band that it uses. When you

travel abroad, you may need to change to an

appropriate band.

Closed user group (Menu 9.5.7)

Use this menu to set incoming and outgoing calls to be

restricted to a selected user group. For details about

how to create a closed user group (CUG), contact your

service provider.

Bluetooth (Menu 9.6)

•

Index list: add, delete, or activate CUG index

numbers.

Using the Bluetooth feature, you can connect the

phone wirelessly to other Bluetooth devices and

exchange data with them, talk hands-free, or control

the phone remotely.

•

Outside access: enable calls to numbers other

than those in the closed user group. This feature

depends on the nature of your CUG subscription.

Bluetooth technology allows free wireless connections

between all Bluetooth-compliant devices within a

range of 10 meters. Since the devices communicate

using radio waves, they do not need to be in line of

sight to each other.

•

My phone’s name: assign a Bluetooth device

name to your phone, which is then displayed on

other devices.

Secure mode: determine if the phone asks for

your confirmation when other devices access your

data.

• If there are obstacles between the devices, the

operating distance may be reduced.

Bluetooth services: display available Bluetooth

services.

• It is recommended that you don’t use the

Bluetooth feature while using multimedia features,

such as voice recorder, camera, and MP3 player,

or vice versa, for better performance.

• Some devices may not be compatible with your

phone.

Searching for and pairing with a Bluetooth

device

1. From the Bluetooth setting options, select My

devices

2. Select Search for new devices

Setting up the Bluetooth feature

After searching, a list of devices to which you can

connect displays. The following icons indicate the

type of device:

The Bluetooth menu provides the following options:

•

Activation: activate or deactivate the Bluetooth

feature.

•

Stereo headset

Computer

•

Printer

My devices: search for connectable Bluetooth

devices.

PDA

Mobile phone

Unknown device

My phone’s visibility: allow other Bluetooth

devices to search for your phone.

Mono headset/

Hands-free car kit

Menu functions

The colour of the icon indicates the status of the

the device:

•

Disconnect: end the connection with the

connected device.

•

Grey for unpaired devices

Blue for paired devices

Red for devices that are currently connected to

your phone

Browse files: search for data from the device and

import data directly to your phone.

Service list: access the Bluetooth service list of

the device.

3. Select a device.

•

Rename: rename the paired device.

4. Enter a Bluetooth PIN and press <OK>. This code

Authorise device/Unauthorised device:

is used just once and you don’t need to memorise

it.

determine whether or not the phone asks you to

permit connection when other devices try to

connect to your phone.

When the owner of the other device enters the

same code, pairing is complete.

•

Delete: remove the selected device or all devices

from the list.

Some devices, especially headsets or hands-free car

kits, may have a fixed Bluetooth PIN, such as 0000

Sending data via Bluetooth

1. Activate the Bluetooth feature.

If the other device has a code, you must enter it.

Using device options

2. Select the application in which the item you want

to send is stored.

From the device list, press <Options> to access the

following options:

3. Scroll to the item you want and press <Options>.

•

Connect: connect to a headset or hands-free car

kit.

4. Select Send via

→

Bluetooth.

The phone searches for devices within range and

displays a list of available devices.

5. Select a device.

PIN check (Menu 9.7.1)

6. If necessary, enter the Bluetooth PIN needed for

The 4- to 8-digit PIN (Personal Identification Number)

protects your SIM card against unauthorised use.

When this feature is enabled, the phone requires your

PIN each time it is switched on.

pairing and press <OK>.

Receiving data via Bluetooth

To receive data via Bluetooth, your phone’s Bluetooth

feature must be active.

Change PIN code (Menu 9.7.2)

Use this menu to change your PIN. The PIN check

feature must be enabled to change the PIN.

1. If an unauthorised Bluetooth device sends data to

your phone, press <Yes> to allow the device to

access your phone.

Phone lock (Menu 9.7.3)

2. Press <Yes> to receive data.

Use this menu to lock the phone from unauthorised

use. When this feature is enabled, you must enter a 4-

to 8-digit phone password each time the phone is

switched on.

Security (Menu 9.7)

Use this menu to protect the phone against

unauthorised use by managing the several access

codes of your phone and SIM card.

The password is preset to 00000000. To change the

password, use the Change password menu.

If you enter an incorrect PIN/PIN2 three times in

succession, the SIM card is blocked. To unblock it

you need to enter your PUK/PUK2 (Personal

Unblocking Key). The codes are supplied by your

service provider.

Change password (Menu 9.7.4)

Use this menu to change your phone password.

Menu functions

Privacy (Menu 9.7.5)

Connection settings (Menu 9.8)

Use this menu to lock access to messages, files, or all

menu functions on the phone, except for call

functions. When a privacy option is enabled, you must

enter the phone password to access the locked items

or functions.

Use this menu to create and customise the profiles

containing the settings for connecting your phone to

the network. You need these settings to use the web

browser or send MMS messages or e-mails.

Your phone is suited for connecting to the network

by default. If you change the settings without first

checking with your service provider, the web

browser, MMS, and e-mail features may not work

properly.

SIM lock (Menu 9.7.6)

This menu allows your phone to work only with the

current SIM card by assigning a SIM lock code. You

must enter the SIM lock code to use a different SIM

card.

Creating a profile

1. Press <New>. If a profile has already been saved,

Fixed dialling mode (Menu 9.7.7)

press <Options> and select Add new

If supported by your SIM card, Fixed Dialling Number

(FDN) mode restricts your outgoing calls to a limited

set of phone numbers. When this feature is enabled,

you can make calls only to phone numbers stored on

the SIM card.

connection

2. Specify each information:

•

Profile name: enter a profile name.

Homepage URL: enter the URL address of the

page to be used as your homepage.

Proxy: activate or deactivate the proxy server.

IP address: enter the IP address of the proxy

server.

Change PIN2 code (Menu 9.7.8)

•

If supported by your SIM card, use this menu to

change your current PIN2.

•

Port: enter the port number of the proxy

server.

Linger time: set a time period after which the

network is disconnected if there has been no

new data traffic in that time.

DNS: activate or deactivate the DNS (Domain

Name Server) addresses.

DNS 1 and DNS 2: enter the primary and

secondary DNS addresses.

Bearer: select the network bearer type.

Advanced settings: change the advanced

options. Depending on the bearer setting,

available options vary.

Data call type: select a call type for data

transmission.

3. Press <Save> to save the profile.

Using profile options

Press <Options> to access the following options:

•

Edit: edit the selected profile.

Delete: delete the profile.

Add new connection: add a new profile.

•

Reset settings (Menu 9.9)

Use this menu to reset the phone’s settings you have

changed.

When the bearer is set to GPRS

1. Press [ ] to select the setting categories to be

reset.

APN: enter the access point name.

2. Press <Reset>.

Password: enter the login password.

3. Press <Yes> to confirm the reset.

4. Enter the phone password and press <OK>.

The password is preset to 00000000. You can

When the bearer is set to GSM

Dial number: enter the PPP phone number.

change this password.!p. 85

Password: enter the login password.

“Enter PUK”

The PIN has been entered incorrectly three times

Solve problems

•

in succession, and the SIM card is now blocked.

Enter the PUK supplied by your service provider.

Help and personal needs

To save the time and expense of an unnecessary service

call, perform the simple checks in this section before

contacting a service professional.

“No service,” “Network failure,” or “Not done”

displays

When you switch on your phone, the following

messages may appear:

•

The network connection has been lost. You may be

in a weak signal area. Move and try again.

•

You are trying to access an option for which you

have no subscription with your service provider.

Contact the service provider for further details.

“Insert SIM”

•

Be sure that the SIM card is correctly installed.

“Enter password”

You have entered a number but it was not dialled

•

The automatic locking function has been enabled.

You must enter the phone’s password before you

can use the phone.

•

Be sure that you have pressed [

Be sure you have accessed the right cellular

network.

“Enter PIN”

•

Be sure that you have not set an outgoing call

barring option.

•

You are using your phone for the first time. You

must enter the PIN supplied with the SIM card.

Your correspondent cannot reach you

•

The PIN check feature is enabled. Every time the

phone is switched on, the PIN has to be entered.

To disable this feature, use the PIN check menu.

•

Be sure that your phone is switched on. ([

pressed for more than one second.)

]

•

Be sure that you are accessing the correct cellular

network.

No number is dialled when you re-call a

Phonebook entry

Be sure that you have not set an incoming call

barring option.

•

Use the Contacts list menu to ensure the number

has been stored correctly.

•

Re-store the number, if necessary.

Your correspondent cannot hear you speaking

•

Be sure that you have switched on the

microphone.

The battery doesn’t charge properly or the phone

sometimes turns itself off

•

Be sure that you are holding the phone close

enough to your mouth. The microphone is located

at the bottom of the phone.

•

Wipe the charging contacts both on the phone and

on the battery with a clean soft cloth.

If the above guidelines do not help you to solve

the problem, take note of:

The phone starts beeping and “Low battery”

flashes on the display

•

The model and serial numbers of your phone

Your warranty details

•

Your battery is insufficiently charged. Recharge the

battery.

A clear description of the problem

The audio quality of the call is poor

Then contact your local dealer or Samsung after-sales

service.

•

Check the signal strength indicator on the display

). The number of bars indicates the signal

strength from strong ( ) to weak ( ).

(

•

Try moving the phone slightly or moving closer to a

window if you are in a building.

SAR tests are conducted using standard operating

positions with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified

power level, the actual SAR level of the phone while

operating can be well below the maximum value. This is

because the phone is designed to operate at multiple

power levels so as to use only the power required to reach

the network. In general, the closer you are to a base

station, the lower the power output of the phone.

Health and safety information

SAR certification information

This phone meets European Union (EU) requirements

concerning exposure to radio waves.

Your mobile phone is a radio transmitter and receiver. It is

designed and manufactured to not exceed the limits for

exposure to radio-frequency (RF) energy, as

recommended by the EU Council. These limits are part of

comprehensive guidelines and establish permitted levels

of RF energy for the general population. The guidelines

were developed by independent scientific organisations

through the periodic and thorough evaluation of scientific

studies. The limits include a substantial safety margin

designed to ensure the safety of all persons, regardless of

age and health.

Before a new model phone is available for sale to the

public, compliance with the European R&TTE Directive

must be shown. This directive includes as one of its

essential requirements the protection of the health and

safety of the user and any other person.

The exposure standard for mobile phones employs a unit

of measurement known as Specific Absorption Rate (SAR).

The SAR limit recommended by the EU Council is 2.0

W/kg.^*

* The SAR limit for mobile phones used by the public is 2.0 watts/

kilogram (W/kg) averaged over ten grams of body tissue. The limit

incorporates a substantial margin of safety to give additional

protection for the public and to account for any variations in

measurements. The SAR values may vary, depending on national

reporting requirements and the network band.

The highest SAR value for this model phone was 0.861

W/kg

•

Extreme temperatures will affect the charging capacity

of your battery: it may require cooling or warming

first.

Do not leave the battery in hot or cold places because

the capacity and lifetime of the battery will be

reduced. Try to keep the battery at room temperature.

A phone with a hot or cold battery may not work

temporarily, even when the battery is fully charged.

Li-ion batteries are particularly affected by

Precautions when using batteries

•

Never use a charger or battery that is damaged in any

way.

•

Use the battery only for its intended purpose.

If you use the phone near the network’s base station,

it uses less power. Talk and standby time are greatly

affected by the signal strength on the cellular network

and the parameters set by the network operator.

temperatures below 0°C (32°F).

•

Battery charging time depends on the remaining

battery charge, the type of battery, and the charger

used. The battery can be charged and discharged

hundreds of times, but it will gradually wear out. When

the operation time is noticeably shorter than normal, it

is time to buy a new battery.

•

Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object like a coin,

clip or pen causes a direct connection between the +

and – terminals of the battery (metal strips on the

battery). For example, do not carry a spare battery in

a pocket or bag where the battery may contact metal

objects. Short-circuiting the terminals may damage

the battery or the object causing the short-circuiting.

•

If left unused, a fully charged battery will discharge

itself over time.

Use only Samsung-approved batteries, and recharge

your battery only with Samsung-approved chargers.

Disconnect the charger from the power source when it

is not in use. Do not leave the battery connected to a

charger for more than a week, since overcharging may

shorten its life.

Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

Health and safety information

Road safety

Electronic devices

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime. But an

important responsibility accompanies the benefits of

wireless phones, one that every user must uphold.

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, certain electronic

equipment may not be shielded against the RF signals

from your wireless phone. Consult the manufacturer to

discuss alternatives.

When you are driving a car, driving is your first

responsibility. When using your wireless phone while

driving, follow local regulations in the country or region

you are in.

Pacemakers

Pacemaker manufacturers recommend that a minimum

distance of 15 cm (6 inches) be maintained between a

wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations

are consistent with the independent research and

recommendations of Wireless Technology Research. If you

have any reason to suspect that interference is taking

place, switch off your phone immediately.

Operating environment

Remember to follow any special regulations in force in the

area you are in, and always switch off your phone

whenever it is forbidden to use it, or when it may cause

interference or danger.

When connecting the phone or any accessory to another

device, read its user’s guide for detailed safety

instructions. Do not connect incompatible products.

Hearing aids

Some digital wireless phones may interfere with some

hearing aids. In the event of such interference, you may

wish to consult your hearing aid manufacturer to discuss

alternatives.

As with other mobile radio transmitting equipment, users

are advised that for the satisfactory operation of the

equipment and for the safety of personnel, it is

recommended that the equipment should only be used in

the normal operating position (held to your ear with the

antenna pointing over your shoulder).

Other medical devices

Potentially explosive environments

If you use any other personal medical devices, consult the

manufacturer of your device to determine if it is

adequately shielded from external RF energy.

Switch off your phone when in any area with a potentially

explosive atmosphere, and obey all signs and instructions.

Sparks in such areas could cause an explosion or fire

resulting in bodily injury or even death.

Your physician may be able to assist you in obtaining this

information.

Users are advised to switch off the phone while at a

refuelling point (service station). Users are reminded of

the need to observe restrictions on the use of radio

equipment in fuel depots (fuel storage and distribution

areas), chemical plants, or where blasting operations are

in progress.

Switch off your phone in health care facilities when

regulations posted in these areas instruct you to do so.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles. Check with

the manufacturer or its representative regarding your

vehicle.

Areas with a potentially explosive atmosphere are often

but not always clearly marked. They include the areas

below decks on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas, such as

propane or butane, areas where the air contains chemicals

or particles, such as grain, dust or metal powders, and any

other area where you would normally be advised to turn

off your vehicle engine.

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Posted facilities

Switch off your phone in any facility where posted notices

require you to do so.

Health and safety information

Emergency calls

Other important safety information

•

Only qualified personnel should service the phone or

install the phone in a vehicle. Faulty installation or

service may be dangerous and may invalidate any

warranty applicable to the device.

Check regularly that all wireless phone equipment in

your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases, or

explosive materials in the same compartment as the

phone, its parts, or accessories.

For vehicles equipped with an air bag, remember that

an air bag inflates with great force. Do not place

objects, including installed or portable wireless

equipment, in the area over the air bag or in the air

bag deployment area. Improperly installed wireless

equipment could result in serious injury if the air bag

inflates.

This phone, like any wireless phone, operates using radio

signals, wireless, and landline networks as well as user-

programmed functions, which cannot guarantee

connection in all conditions. Therefore, you should never

rely solely on any wireless phone for essential

•

communications like medical emergencies.

To make or receive calls, the phone must be switched on

and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone

networks or when certain network services and/or phone

features are in use. Check with local service providers.

•

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your present

location. Emergency numbers vary by location.

•

Switch off your phone before boarding an aircraft. It is

dangerous and illegal to use wireless phones in an

aircraft because they can interfere with the operation

of the aircraft.

Failure to observe these instructions may lead to the

suspension or denial of telephone services to the

offender, or legal action, or both.

3. Press

[

Certain features like Call Barring may need to be

deactivated before you can make an emergency call.

Consult this document and your local cellular service

provider.

•

Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the phone. Wipe it with a

soft cloth slightly dampened in a mild soap-and-water

solution.

Do not paint the phone. Paint can clog the device’s

moving parts and prevent proper operation.

Do not put the phone in or on heating devices, such as

a microwave oven, stove, or radiator. The phone may

explode when overheated.

When the phone or battery gets wet, the label

indicating water damage inside the phone changes

colour. In this case, phone repairs are no longer

guaranteed by the manufacturer's warranty, even if

the warranty for your phone has not expired.

If your phone has a flash or light, do not use it too

close to the eyes of people or animals. This may cause

damage to their eyes.

Use only the supplied or an approved replacement

antenna. Unauthorised antennas or modified

accessories may damage the phone and violate

regulations governing radio devices.

If the phone, battery, charger, or any accessory is not

working properly, take it to your nearest qualified

service facility. The personnel there will assist you, and

if necessary, arrange for service.

Care and maintenance

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for many

years.

•

Keep your phone and all its parts and accessories out

of the reach of small children and pets. They may

accidentally damage these things or choke on small

parts.

•

Keep the phone dry. Precipitation, humidity, and liquids

contain minerals that corrode electronic circuits.

Do not use the phone with a wet hand. Doing so may

cause an electric shock to you or damage to the phone.

Do not use or store the phone in dusty, dirty areas, as

its moving parts may be damaged.

Do not store the phone in hot areas. High

•

temperatures can shorten the life of electronic devices,

damage batteries, and warp or melt certain plastics.

•

Do not store the phone in cold areas. When the phone

warms up to its normal operating temperature,

moisture can form inside the phone, which may

damage the phone’s electronic circuit boards.

Do not drop, knock, or shake the phone. Rough

handling can break internal circuit boards.

•

Index

Characters, enter • 24

Configuration messages • 51

Connection tone • 80

Converter • 44

Creating messages

e-mail • 50

MMS • 49

SMS • 48

CUG (Closed User Group) • 82

layout • 10

settings • 78

Diverting, calls • 80

Document files • 65

DRM (Digital Rights

Management) • 61

DTMF tones, send • 29

AB mode, text input • 24

Active flip • 77

Alarm • 43

Calculator • 43

Calendar • 66

Call cost • 32

Call log

Answering

call • 27

dialled • 31

second call • 28

Anykey answer • 77

Auto redial • 77

missed • 31

received • 31

Call time • 31

Caller groups • 34

Caller ID • 79, 81

Calls

answering • 27

barring • 81

diverting • 80

holding • 28

redialling • 26

rejecting • 27

transferring • 29

waiting • 81

Camera

E-mails

creating/sending • 50

deleting • 54

setting • 58

viewing • 54

Emergency calls • 94

Date, set • 76

Deleting

Background image • 78

Backlight time, set • 78

Band selection • 82

Barring, calls • 81

Battery

call log • 30

e-mail • 53, 54, 56

events • 69

MMS • 52, 53, 56

phonebook • 33, 35

SMS • 51, 53, 56

Dialled calls • 31

Dialling display, set • 78

Display

charging • 7

FDN (Fixed Dialling Number)

mode • 86

File manager • 61

File viewer • 65

Flip tone • 79

low indicator • 8

precautions • 91

Bluetooth

receiving, data • 85

sending, data • 84

settings • 83

photos • 70

videos • 73

backlight, set • 78

brightness • 78

icons • 10

Broadcast messages • 52, 61

Browser, web • 45

Games • 42

Greeting message • 77

CB (Cell Broadcast) messages •

52, 61

language • 77

menu functions • 86

phone • 85

SIM card • 86

deleting • 52

setting • 57

viewing • 51

password • 85

resetting • 87

switching on/off • 8

unpacking • 6

Health and safety • 90

Holding, call • 28

Low battery indicator • 8

MP3 player • 36

Multiparty-call • 30

Music, downloaded • 64

Phonebook

Icons, description • 10

Image editor • 40

Images, downloaded • 62

Inbox, messages

e-mail • 54

adding • 33

deleting • 33, 35

finding • 32

managing • 35

options • 32

speed dialling • 34

Memory card

accessing files • 66

installing • 22

Memory status

downloaded items • 66

file manager • 66

messages • 61

phonebook 36

Menu style • 78

Message tone • 79

Messages

Name card • 35

Names

entering • 24

MMS/SMS • 51

International calls • 26

Internet • 45

searching • 32

Network band, select • 82

Network selection • 81

Network services • 80

Photos

editing • 40

taking • 70

viewing • 62

Java applications • 42

PIN, change • 85

PIN2, change • 86

Power on/off tone • 79

Privacy • 86

Problems, solve • 88

Push messages • 52, 61

Outbox, messages • 53

cell broadcast • 52, 61

configuration • 52

e-mail • 50, 54

greeting • 77

MMS • 49, 52

push • 52, 61

Keypad lock • 77

Keypad tones

selecting • 79

sending/muting • 29

volume • 79

Password

call barring • 81

phone • 85

Phone

SMS • 48, 51

Quiet mode

entering • 13

setting • 79

care and maintenance •

display • 10

icons • 10

locking • 85

Language, select • 77

Last number, redial • 26

Locking

Minute minder • 80

Missed calls • 31

MMS messages

creating/sending • 49

cover keypad • 77

Received calls • 31

Index

Received messages

e-mail • 54

MMS/SMS • 51

Recording

videos • 73

voice memos • 39

Redialling

automatically • 77

manually • 26

Resetting phone • 87

Ringer

incoming calls • 79

messages • 79

Road safety • 92

Roaming • 81

SMS messages

creating/sending • 48

Waiting call • 81

Wallpaper • 78

Web browser

access • 45

deleting • 51

setting • 56

viewing • 51

Sound settings • 79

Sounds, downloaded • 64

Speakerphone • 29

Speed dial • 34

Stopwatch • 44

Switching on/off

microphone • 29

phone • 8

bookmarks • 47

World time • 42

T9 mode, text input • 25

Templates, message • 55

Text, enter • 24

Time, set • 76

Timer • 44

Safety

information • 90

precautions • 1

Security, calls • 85

Sent messages • 53

Shortcut • 77

SIM card

inserting • 7

locking • 86

Skin colour • 78

Videos

playing • 63

recording • 73

Voice recorder

playing • 39

recording • 39

Voicemail server • 82

Toshiba MK2018GAS User Manual
Sony Dream Machine ICF C233L User Manual
Sharp KIN One OMPB10ZU User Manual
Sharp CD Player CD DD4500 User Manual
Seagate ST373355SS User Manual
Samsung Smiley SGH t359 User Manual
Samsung Dart Portable Quad Band Mobile Phone SGH T499 User Manual
Roberts Radio CD9925 User Manual
Philips HD7805 User Manual
Nokia XPRESSMUSIC 5320 User Manual