Samsung A886 User Manual

QUAD BAND Series  
SGH-A886  
Portable Digital Mobile Phone  
User Manual  
Please read this manual before operating your phone,  
and keep it for future reference.  
Table of Contents  
i
ii  
iii  
Important Safety Precautions  
Please read these guidelines before using your wireless phone. Failure to  
comply with them may be dangerous or illegal.  
Road Safety  
Do not use a hand-held phone while driving; park the vehicle first.  
Switch Off When Refueling  
Do not use the phone at a refueling point (service station) or near fuels or  
chemicals.  
Switch Off in Aircraft  
Wireless phones can cause interference. Using them in aircraft is both  
illegal and dangerous.  
Switch Off in Hospitals  
Switch your phone off near medical equipment. Follow any regulations or  
rules in force.  
Special Regulations  
Follow any special regulations in force in any area and always switch your  
phone off whenever it is forbidden to use it, or when it may cause  
interference or danger (for example, in a hospital).  
Sensible Use  
Use the phone only in the normal position (held to the ear).  
Important Safety Precautions  
1
   
Emergency Call  
Ensure the phone is switched on and in service. Press Keypad, key in the  
emergency number for your present location, then press Call. You must  
deactivate any unnecessary features before you can make an emergency  
call. Give all the necessary information as accurately as possible. Do not  
end the call until given permission to do so.  
Water Resistance  
Your phone is not water-resistant. Keep it dry.  
Accessories and Batteries  
Use only Samsung-approved accessories and batteries. Use of any  
unauthorized accessories could damage your phone and may be  
dangerous.  
Qualified Service  
Only qualified service personnel may repair your phone.  
For more detailed safety information, see “Health and Safety Information”  
Important Safety Precautions  
2
 
Getting Started  
This section explains how to start using your phone by first configuring your  
hardware, activating your service, and then setting up your voice mail.  
Setting Up Your Phone  
When you subscribe to a cellular network, you receive a plug-in SIM  
(Subscriber Identity Module) card loaded with your subscription details,  
such as your PIN, and optional services you have selected.  
Prior to using your phone it is necessary to install both the battery and SIM  
into their corresponding internal compartments. The microSD card slot is  
also located in this same internal area.  
1. Apply pressure to the battery cover and slide the cover in the direction  
of the arrow.  
2. Lift the cover away from the phone.  
Getting Started  
3
       
Installing the SIM Card  
Important! The plug-in SIM card and its contacts can be easily damaged by scratches or  
bending. Use caution when inserting or removing the card and keep it out of reach of children.  
Position the SIM card as indicated on the SIM card slot (angled corner at  
the upper edge), then carefully slide the card into the socket.  
Installing the Memory Card  
Your phone also supports the use of a microSD™ memory card for data  
storage such things as music, pictures, and video files.  
1. Position the microSD card as indicated on the phone (gold contact pins  
facing upward and toward the slot).  
2. Slide the microSD card into the slot then press in with your fingertip  
until it locks into position with an audible click.  
Getting Started  
4
   
Note: The Samsung a886 has been tested to support cards up 16GB capacity.  
Installing the Battery  
1. Align the top edge of the battery under the tabs at the top edge of the  
battery chamber with the arrow on the battery pointing toward the  
battery contacts.  
2. Press the battery down until it is seated in the battery chamber.  
Getting Started  
5
 
3. While applying slight pressure, slide the cover back on the phone until  
it locks into position.  
Charging the Battery  
Your phone is powered by a rechargeable Li-ion (lithium ion) battery. Use  
the travel adapter supplied with your phone to charge the battery, and use  
only Samsung approved batteries and chargers.  
Note: Fully charge the battery before using your phone for the first time. A discharged battery  
recharges fully in approximately four hours. You can use the phone while the battery is charging,  
but this causes the phone to charge more slowly.  
Warning! For connection to an electrical supply not located in North America, you must use an  
adapter of the proper configuration for the power outlet. Use of the wrong adapter could damage  
your phone and void your warranty.  
Important! Verify that the phone battery is installed prior to connection. If the battery is not  
properly installed when the wall charger is connected, the phone may power off and on  
continuously, preventing proper operation.  
Getting Started  
6
   
1. Open the cover over the jack on the right side of the phone and plug  
the connector of the travel adapter into the jack.  
2. Plug the adapter into a standard AC wall outlet. If the phone is off, the  
display indicates that the phone is charging. If the phone is on, a bar in  
the battery icon flashes to indicate charging.  
3. When the phone is fully charged, the message “Battery Full” appears  
on the display or the bars in the battery icon stop flashing. Unplug the  
adapter from the power outlet and disconnect it from the phone by  
gently pulling the connector out of the jack.  
Note: To avoid damaging the phone, unplug the adapter before removing the battery from the  
phone.  
Note: The phone is also charged when connected to the USB port of a PC using the USB cable.  
Low Battery Indication  
When only a few minutes of talk time remain, the empty battery icon  
flashes and a warning tone sounds at regular intervals. The backlight dims  
to conserve the remaining battery power. When the battery level becomes  
too low, the phone automatically turns off. Recharge the battery to restore  
phone operation.  
Getting Started  
7
   
Switching the Phone On and Off  
To switch the phone on:  
1. Press and hold  
or  
until the phone switches on.  
2. If prompted, enter the password and touch Confirm. For further details,  
see the Lock Phone option in “Phone” on page 151.  
3. If prompted, enter the PIN and touch Confirm. For further details, see  
the Check PIN Code section in “Phone” on page 151.  
The phone searches for your network and, after finding it, the Idle  
screen appears on the display. You can now make and receive calls.  
The default display language setting is Automatic, which is dependent  
on the setting programmed into your SIM. For further details or to  
change the language, see the Language section in “Phone” on  
To switch the phone off, press and hold  
displayed.  
until the power-off image is  
Locking the Touch Screen  
LOCK  
To lock the touch screen and prevent accidental presses, press  
LOCK  
(on the top of the phone). Press  
again to unlock the touch screen.  
Access Codes  
There are several access codes used by your phone and its SIM card.  
These codes help protect the phone against unauthorized use.  
When requested to enter any of the codes, enter the code and touch  
<Confirm>.  
Except for the PUK and PUK2 codes, access codes can be changed using  
the Security menu (see the Security section in “Phone” on page 151).  
Getting Started  
8
                 
Important! Avoid using access codes that are similar to emergency numbers, such as 911, to  
prevent accidentally dialing an emergency number.  
Phone Password  
The Phone Lock feature allows you to set a password to protect your  
phone against unauthorized use. For instructions, see the Security section  
PIN  
The Personal Identification Number or PIN (4 to 8 digits) protects your SIM  
card against unauthorized use. It is usually supplied with the card.  
If you enter an incorrect PIN three times in succession, the code is disabled  
and cannot be used until you re-enable it by entering the PUK (see below).  
For instructions on activating or deactivating the PIN Check feature and  
changing the PIN, see the Security section in “Phone” on page 151.  
PUK  
The 8-digit PUK (PIN Unblocking Key) is required to change a disabled PIN. If a  
PUK was not supplied with your SIM card, contact your service provider.  
To re-enable your PIN:  
1. Enter the PUK and touch Confirm.  
2. Enter a new PIN of your choice and touch Confirm.  
3. When the Confirm PIN Code message displays, enter the same code  
again and touch Confirm.  
If you enter an incorrect PUK ten times in succession, the SIM card  
becomes invalid. Contact your service provider for a new card.  
Getting Started  
9
     
PIN2  
A 4 to 8 digit PIN2 is supplied with some SIM cards to allow access to  
specific functions supported by those cards.  
If you enter an incorrect PIN2 three times in succession, the code is  
disabled and you cannot access the functions until you re-enable it by  
entering the PUK2.  
To change the PIN2, see the Security section in “Phone” on page 151.  
PUK2  
An 8-digit PUK2 (PIN Unblocking Key 2) is required to change a disabled  
PIN2. If a PUK was not supplied with your SIM card, contact your service  
provider.  
To re-enable your PIN2:  
1. Enter the PUK2 and touch Confirm.  
2. Enter a new PIN2 of your choice and touch Confirm.  
3. When the Confirm PIN2 Code message displays, enter the same code  
again and touch Confirm.  
If you enter an incorrect PUK2 ten times in succession, the SIM card  
becomes invalid. Contact your service provider for a new card.  
Getting Started  
10  
   
Your Phone  
The section outlines some key features of your phone. It also explains the  
screens and the icons that appear when the phone is in use.  
Features of Your Phone  
Your phone is lightweight, easy-to-use and offers many valuable features.  
The following list outlines a few of the features included in your phone.  
Touch screen provides quick response to menus and options  
Multitasking  
Widgets that provide fast access to frequently used functions.  
Ready access to the Internet  
Built-in Bluetooth technology  
Instant Messaging capability  
microSD card compatibility for additional data storage  
Camera  
Your Phone  
11  
     
Phone Layout  
The following illustrations show the main elements of your phone.  
Front View of Your Phone  
1
2
3
4
5
9
6
8
7
1. Speaker: Allows you to hear the caller.  
2. Touch screen: Display screen that responds to touch. Provides all  
information needed to operate your phone.  
3. Widget tab: Accesses the Widget toolbar (see “Widget Bar Navigation”  
4. Contacts key: Accesses your current Contacts, Groups and Favorites  
lists.  
5. Keypad key: Accesses the Phone Functions screen, where you can  
enter a phone number and place a call, send a message or open your  
contact list.  
Your Phone  
12  
       
6. Talk/Send key: Allows you to power on the phone, make or answer a  
call, and access the Call History list. Press and hold to redial the last  
phone number.  
7. Back key: Returns to the previous menu or Web page.  
8. Power/End key: Ends a call. Press and hold for three seconds to turn  
the phone on or off. While in a menu, press to return to Idle mode.  
9. Menu key: Accesses the phone’s Main Menu screen. While using the  
menu screens, this key is replaced by the Message key, which opens  
the Create screen for creating a new text message.  
Edge Views of Your Phone  
7
1
6  
2
5
4
3  
Your Phone  
13  
 
1. Microphone: Allows other callers to hear you during a call when the  
phone is in Speakerphone mode.  
2. Volume keys: Adjust ringer volume in standby mode, mute ringer  
when receiving a call, adjust volume during a call and adjust text size  
when reading a message or using the browser.  
3. Microphone: Allows other callers to hear you during a call when the  
phone is not in Speakerphone mode.  
4. Camera key: In Idle mode, press to launch the camera. In Camera  
mode, press to take a picture.  
5. Multitask key: Launches the multitask menu, which provides ready  
access to several commonly used features: Messages, IM, MobileMail,  
Friends, Shop. You can also select End all? to close all running  
features and return to the Idle screen.  
6. Power/Accessory Interface connector: Allows you to connect a  
Travel Charger or other optional accessories such as a USB/data cable  
or hands-free headset.  
7. Lock key: Lets you lock and unlock the touch screen. If you receive an  
incoming call while the screen is locked, you can answer it without  
unlocking the screen.  
Your Phone  
14  
Rear View of Your Phone  
1
2
1. Camera lens: Used to take pictures and videos.  
2. Mirror: Helps position the camera when taking a self-portrait.  
Unlocking the Phone  
LOCK  
When the A886 is locked, press  
(on the top of the phone) to  
unlock the phone and display the Idle screen.  
Your Phone  
15  
   
Display  
Display Layout  
Your display screen provides information about the phone’s status and  
options, as well as providing access to the innovative widget bar.The  
display has four main areas:  
Indicators  
Widget bar  
Main display area  
Function categories  
Widget Bar  
The Widget bar allows quick access to frequently used functions: Home,  
Rogers and Contents (links to Rogers services); Analog Clock; Digital  
Clock; Dual Clock (World Clock); Create New Message; Photo Favorites;  
Voice Recognition; Today; Calendar; Bookmarks; Pictures; Birthday;  
Sound Profile; Bluetooth; Alarms; Calculator; Notifications; Media Player;  
Yahoo! Finance; Communities; Yahoo! Search; Google Search;  
AccuWeather; digg; and More Widgets. For details on using the Widget  
Note: The Notifications widget only appears to inform you of calendar events, missed calls, or  
new messages.  
Your Phone  
16  
       
Icons  
Received signal strength. The more bars, the stronger the  
signal.  
Indicates that the Airplane Mode is active. You cannot send  
or receive calls or access online information.  
No network coverage available.  
Call in progress.  
Displays on the Lock screen when a call has been missed.  
Displays in the Event Widget when a call has been missed.  
Battery level. The more bars, the more power remaining.  
Connection to an Edge network is active.  
Phone is communicating with an Edge network.  
Connection to a 3G (HSDPA) network is active.  
Phone is accessing services on a 3G (HSDPA) network.  
Phone is communicating with a 3G (HSDPA) network.  
A microSD memory card is inserted.  
Phone is connected to a computer via USB cable connection  
Your Phone  
17  
 
Displays in the Indicators area when a new text message has  
been received.  
Displays in the Event Widget as a tab when a new message  
has been received.  
Displays in the Indicators area when a new Multimedia  
message has been received.  
Displays in the Event Widget as a tab when a new OTA  
(over-the-air) message has been received from your service  
provider.  
Displays in the Event Widget as a tab when an event has  
been missed.  
Displays in the Indicators area when a new voice mail has  
been received.  
Displays in the Indicators area when a new WAP message  
has been received.  
Text message inbox is full.  
An alarm is set. For details, see “Alarms” on page 130.  
Call Forwarding feature is active. For details, see “Call  
Sound profile is set to Normal.  
Sound profile is set to Silent or the volume has been lowered  
to level 0.  
Sound profile is set to Driving.  
Sound profile is set to Outdoor.  
Your Phone  
18  
Bluetooth is activated.  
Bluetooth headset has been paired with the phone.  
Displays when browsing the Web.  
ActiveSync file transfer, SYNC schedule set to Push: icon is blue  
while connecting, red during SYNC, blue when SYNC has  
successfully completed, gray if SYNC failed.  
Your Phone  
19  
Using Menus  
This section explains how to use your phone’s menus. The A886 has done  
away with the need for navigation wheels or keypads; it is completely  
navigable by either onscreen touch or scroll.  
Menu Navigation  
Opening and Closing an Application  
To open any phone application, touch the associated screen icon.  
To return to the previous screen, press  
.
To return to the Idle screen, press  
.
Accessing the Main Menu  
To access the Main menu from the Idle screen, touch  
.
Using Menus  
20  
       
Navigating Lists  
When you open a menu, the menu options display on the screen as a  
scrollable list.  
To activate a list item, touch it.  
To scroll through the list, firmly press and slide your finger up or down  
the screen.  
To move up or down by a full screen, press the volume keys.  
Note: Scrolling requires that you press firmly on the screen and then drag. When scrolling  
through a list do not touch or press individual entries on the list as this will open the list entry.  
Using Menus  
21  
Scrolling Through Field Entries  
Some screens will ask you to assign a value to an onscreen field by either  
touching up/down selection arrows or by quickly sliding through the values  
using your fingertip. An example of these actions is the Jog screen on the  
Alarm page, where you can set the time by touching the + and - buttons or  
by quickly sliding your fingertip over the numbers.  
Using Menus  
22  
 
Using the Multitasking Menu  
The Multitask menu can be activated from within any active window or  
page on the phone by pressing  
, allowing you to temporarily exit  
from your current location, quickly do something else, then return to the  
previous task. The menu lets you select the following functions:  
Messages: Opens the Messages menu (see “Messages” on page 87).  
IM: Opens Instant Messaging (see “IM” on page 93).  
MobileMail: Opens the MobileMail application (see “MobileMail” on  
page 93).  
Friends: Opens the browser and accesses the Rogers Friends page (see  
Shop: Opens the browser and accesses the Rogers Zone page.  
End All: exits the Multitask menu and returns you to your previously active  
menu or page.  
Using Menus  
23  
   
Widget Bar Navigation  
The Widget Bar is a slide-out pane located at the left of the Idle screen that  
provides quick access to a series of “widgets”, which are user-selected  
mini-applications that provide information at a glance and easy access to  
frequently used tools such as: Home, Rogers and Contents (links to  
Rogers services); Analog Clock; Digital Clock; Dual Clock (World Clock);  
Create New Message; Photo Favorites; Voice Recognition; Today;  
Calendar; Bookmarks; Pictures; Birthday; Sound Profile; Bluetooth;  
Alarms; Calculator; Notifications; Media Player; Yahoo! Finance;  
Communities; Yahoo! Search; Google Search; AccuWeather; digg; and  
More Widgets.  
Accessing the Widget Bar  
To open the Widget Bar, tap the Widget Bar tab on the left side of the Idle  
screen  
.
Using Menus  
24  
   
Scrolling Through the Widget Bar  
The Widget Bar contains more widgets than can be displayed on screen at  
one time. To scroll the Widget Bar:  
Use your fingertip to scroll the Widget Bar up and down.  
Flick the screen in an upward or downward motion to quickly scroll  
through the list.  
Undocking Widgets  
You can drag widgets to the desktop to use the application, then drag them  
back to the Widget Bar when you are finished.  
1. Touch and hold your fingertip on the widget.  
2. While still touching the icon, in a single motion drag it over to the main  
display and remove your finger from the screen. The application  
remains on the Main display screen.  
Note: Many widgets can be used from the menu bar without dragging them on to the screen by  
simply touching the corresponding icon.  
Using Menus  
25  
 
Rearranging Widgets  
You can also customize the Widget bar by rearranging the location of your  
current widgets, for example to place frequently used (favorite) widgets at  
the top of the list.  
1. Touch and hold your fingertip on the widget.  
2. While still touching the icon, in a single motion drag it away from the  
Widget Bar and drop it in the new location on the Widget Bar.  
You can also drop the widget on the main screen, then drag it back into the  
Widget Bar in the desired location.  
Activating a Widget  
1. Locate the widget you want to use (whether it is still docked in the  
Widget bar or on the main screen).  
2. Touch the icon to activate the mini-application (widget).  
Note: The Analog Clock, Digital Clock, and Today widgets must be dragged to the Main Display  
screen.  
Adding and Deleting Widgets  
To select which items are displayed or hidden within the Widget bar:  
1. From Idle mode, touch  
Settings Display and Light  
Widget.  
2. Widgets with a check mark in the associated check box are displayed,  
widgets without a check mark are not displayed. To add or remove  
check mark, touch the check box.  
Using Menus  
26  
     
The following table contains a description of the widgets included with your  
phone.  
Home: Opens the browser and accesses the Rogers Home page.  
Content: Provides links to the Games & Apps, Ringtones, and  
Videos folders.  
Rogers: Provides links to Rogers Home, Rogers Zone and My  
Account (open in browser).  
Analog Clock: Displays the current time on an analog clock face.  
Drag and drop the Analog Clock onto the desktop to view the time in  
an analog format.  
Digital Clock: Displays the current time on a digital clock face.  
Drag and drop the Digital Clock onto the desktop to view the time in  
a digital format.  
Dual Clock: Displays the time in two different time zones. For more  
Create New Message: Allows you to create new text or picture  
messages. For more information, see “Creating and Sending  
Voice Recognition: Opens the voice recognition application. For  
more information, see “Voice Recognition” on page 120.  
Using Menus  
27  
Photo Favorites: Displays Contacts Favorites arranged as a scrollable  
series of pictures. Touch an entry to see the associated contact  
information. Touch the phone icon to place a call. Touch the message  
ifcaovnortiotews raitreealismteedssaangdec.aTnoubceheadnitdeddrinagCtoonrtoatcattsetheliFsat.vTohrietesse.  
Monday  
Today: Displays the current date (day/month/year).  
SEP 22 2008  
Calendar: Displays a calendar for the current month. Touch the  
calendar to open the Calendar application (see “Calendar” on  
3
Bookmarks: Allows you to access a list of frequently visited  
internet locations, including Yahoo!, Facebook, Twitter, MySpace,  
RingBacks, Wikipedia, craigslist.ca, Get New Games, Get New  
Ringtones, and locations you have saved.  
Pictures: Opens the Pictures menu, where you can view photos  
you have downloaded, received or taken using the internal camera.  
You can set an image as the current wallpaper. For more  
Birthday: Displays an onscreen alert for up to five upcoming  
birthdays that have been previously entered in Contacts (birthday is  
within 29 days of the current date). For more information, see“Add  
Sound Profile: Allows you to quickly modify your current sound  
Profile. For more information, see “Sound Profile” on page 145.  
Bluetooth: Opens the Bluetooth Settings screen. For more  
Alarms: Accesses alarm settings. For more information, see  
Using Menus  
28  
0
Calculator: Opens the built-in calculator. For more information, see  
Notifications: Displays on the screen to inform you of calendar  
events, missed calls, or new messages. For more information, see  
Media Player: Controls playback of music files stored on the phone  
or external card. Drag and drop on the main screen, then touch  
“Media Player” to launch the media player. Touch the arrows to  
control playback of the currently active song. For more information,  
1:01 Play 00:01:23  
Communities: Lets you directly access online communities such  
as: Facebook, Picasa, Flickr, Photobucket, Friendster and  
MySpace.  
Yahoo! Finance: Lets you add and watch stocks and equity indices  
on the desktop.  
Yahoo! Search: Lets you initiate a Yahoo Search. Drag and drop,  
tap the search field, enter a keyword, then tap the magnifying glass.  
Google Search: Lets you initiate a Google Search. Drag and drop,  
tap the search field, enter a keyword, then tap the magnifying glass.  
AccuWeather: Lets you view the weather forecast for up to six  
days. Touch the forecast area to open the browser and access the  
AccuWeather site, where you can change location or language.  
digg: Opens the browser and accesses popular news and stories  
on Web site digg.com. Touch the short description to open the full  
story in the browser.  
Using Menus  
29  
More Widgets: Opens the browser and accesses site where you  
can download free widgets.  
Note: Downloadable widgets are provided by Samsung at no cost, however you must have a  
data plan subscription with your service provider.  
Understanding the Notifications Widget  
The Notifications widget displays on the screen to inform you of calendar  
events, missed calls, or when new messages have been sent to the phone.  
The following is a description of these onscreen notification tabs:  
Displays within the Notifications widget as a tab when a new  
message is received.  
Displays within the Notifications widget as a tab when a call has  
been missed.  
Displays within the Notifications widget as a tab when a new  
voicemail message is received.  
Displays within the Notifications widget as a tab when a scheduled  
event has been missed.  
Note: The Notifications widget only appears to inform you of calendar events, missed calls, or  
new messages.  
Using Menus  
30  
     
Menu Structure  
The menu structure is as follows:  
7. Media  
1. Call History  
1. Audio  
2. Pictures  
3. Videos  
4. Other Files  
5. Memory Status  
2. Contacts  
1. Contacts  
2. Groups  
3. Favorites  
4. Add New Contact  
5. Service Number  
6. Contacts Settings  
7. SIM Management  
8. Games & Apps  
1. Get New Games  
2. Get New Applications  
3. Tools  
3. My Account  
4. Home  
9. urMusic  
10. IM  
5. Internet  
11. MobileMail  
12. Settings  
6. Messages  
1. Create New Message  
2. Inbox  
3. MobileMail  
4. IM  
5. Friends  
6. Sent  
1. Sound Profile  
2. Display and Light  
3. Time and Date  
4. Phone  
5. Calls  
7. Outbox  
8. Drafts  
6. Connectivity  
7. Applications Settings  
8. Memory Management  
9. Phone Status  
9. Exchange ActiveSync  
10. Templates  
11. Voice Mail  
12. Messaging Settings  
13. Delete by Folder  
14. Memory Status  
Using Menus  
31  
   
Call Functions  
This section describes how to make or answer a call, and all associated  
features and functionality.  
Making a Call  
1. From the Idle screen, touch  
enter the number you wish to dial.  
and use the onscreen keypad to  
2. Touch  
or press  
.
Note: When you activate the Auto Redial option, the phone automatically redials up to ten times  
when the call is not answered or someone is already on the phone. For carriers that  
automatically divert unanswered calls to voice mail, the Auto redial feature will not provide useful  
service. See the Auto Redial section in “Voice Call” on page 157 for further details.  
Making an International Call  
1. Touch  
, then touch and hold  
. The + character appears.  
2. Use the onscreen keypad to enter the country code, area code, and phone  
number.  
3. If you make a mistake, touch  
deleted.  
until the desired numbers have been  
4. Touch  
or press  
.
Manual Pause Dialing  
To add pause(s) to the number you are calling without storing it in your  
Contacts list:  
1. Touch  
2. Press and hold  
to enter the additional numbers.  
and use the onscreen keypad to enter the phone number.  
to add a two-second pause, then use the keypad  
Call Functions  
32  
             
3. Touch  
or press  
.
Note: You can create pauses longer than two seconds by pressing P multiple times.  
Correcting an Entered Number  
Use the following steps to correct a mis-typed entry when dialing:  
To clear the last digit displayed, press  
.
To clear a different digit in the number, touch the number immediately to  
the right of the digit to be cleared, which moves the cursor to the  
immediate right of the digit to be cleared, then press  
.
To enter a missing digit, touch the number immediately to the right of the  
spot where the digit is to be entered, which moves the cursor to the  
required spot, and touch the digit.  
To clear the entire string of numbers, press and hold  
.
Ending a Call  
When you want to end your call, press  
.
Dialing a Recent Number  
All incoming, outgoing and missed calls are listed in the Call History menu.  
If the number or caller is listed in Contacts, the name associated with the  
number also displays.  
1. From the Idle screen, press  
or press  
and select  
Call History.  
2. The screen opens to the All Calls list. To view lists of individual types of  
calls, touch the drop-down arrow at the upper right of the screen and  
select Missed, Dialed or Received.  
3. Touch  
next to the desired phone number (or entry name if the  
caller is already in Contacts).  
Call Functions  
33  
     
- or -  
Touch the contact to enter the Details page, then touch Call or press  
to dial the number.  
Note: You can also press and hold  
to redial the last number from the Idle screen.  
Making a Call Using Speed Dial  
You can assign a short cut number to a phone number for speed dialing.  
1. Touch  
Contacts Contacts Settings   
Speed Dial. The Speed Dial screen displays showing the numbers 1  
through 9. The number 1 is reserved for Voice Mail.  
2. Touch an unused number. The Contacts screen displays.  
3. FInd the contact you want to assign to the number. You can scroll  
through the list or tap on the search box and enter the letters of the  
name you are searching for until the name appears.  
4. Tap the contact to assign to the number.  
To replace a number, touch Replace, touch the number you wish to  
reassign, and touch the contact.  
To remove one or more numbers, touch Remove, touch the check box in  
the upper right corner of each entry to be removed, then touch OK.  
Making a Call from the Contacts List  
You can store phone numbers that you use regularly in the SIM card or the  
phone’s memory and recall them to place a call. These entries are  
collectively grouped in Contacts (see “Contacts” on page 59 for more  
information).  
Call Functions  
34  
     
Answering a Call  
When a call is received, the phone rings and displays the caller’s phone  
number. If the number is associated with an entry in Contacts, the contact’s  
Display Name is displayed. If your phone service includes “call display” and  
the caller can be identified, the caller’s name is displayed.  
1. Press  
or touch Accept on the Incoming call screen.  
If the Any Key option in the Call Answer menu is activated, you can  
press any key to answer a call except or Reject. See the Call  
Answer section in “General Call Settings” on page 156 for more  
information.  
2. End the call by pressing  
.
Note: You can answer a call while using Contacts or menu features. After ending the call, the  
phone returns to the previously active menu screen.  
Other Answer Options  
To mute the ring tone when receiving an incoming call:  
Briefly press either volume key.  
If Motion Detection is turned on and the phone is facing upwards, flip it  
over so that it is facing down; if the phone is facing downwards, flip it  
over so it is facing upward and then flip it over again so that it is facing  
downward. To set up your phone to utilize Motion Detection, see “Motion  
To reject a call and send it directly to voicemail, press and hold either  
volume key.  
Call Functions  
35  
       
Dialing Options  
From the Idle screen and Main menu, you have the option to access the  
Keypad and initiate a call. When you manually enter numbers from the  
Keypad, there are three dialing options displayed on the screen.  
Call: dials the entered number.  
Send Message: Lets you create a new text message and send it to the  
entered number.  
Contacts: takes you to Contacts where you can select a contact to call.  
Recent Calls  
The phone stores the numbers of the calls you’ve dialed, received, or  
missed in the Call History menu. You can access this menu from the Idle  
screen by doing one of the following:  
Briefly press  
.
– or –  
Touch  
Call History.  
The All Calls list is displayed. Touch the drop-down list located at the top  
right of the screen to select list of calls Missed, Dialed, or Received.  
If the number or caller is listed in Contacts, the associated name is  
displayed.  
Viewing All Calls  
1. From the Recent Calls menu, touch the drop-down list and select All.  
All calls dialed, received and missed are listed.  
2. Touch an entry on the list to access the following options:  
Call: Allows you to return the call automatically.  
Send Message: Allows you to sent a text or Multimedia message to  
the caller.  
Call Functions  
36  
     
Save: Allows you to save the number to your Address Book on either  
the phone or SIM card.  
Block Caller: Allows you to add the sending number to your Reject  
List, where incoming calls are sent directly to voice mail.  
Delete: Allows you to delete the selected call.  
Viewing Missed Calls  
If you only missed a single call, call details are displayed in the Missed Call  
dialog on the Idle screen.  
If you missed more than one call, the number of calls missed is displayed  
on the Idle screen. To view details of the most recent missed calls:  
1. Touch Logs. A list of the most recent missed calls is displayed. If the  
caller left a voicemail, a voicemail icon is displayed and can be  
selected. You can also touch and drag to scroll through the list of  
missed calls.  
2. Touch the desired missed call. Information for that call and caller is  
displayed on a Missed Calls page. For more information regarding the  
available options, see “Viewing All Calls” above.  
To move to another call type, touch the call drop-down list (upper right of  
the Call History page) and make your selection.  
Calling Back a Missed Call  
If there was only a single missed call, touch Call.  
If there were multiple missed calls:  
1. Touch Logs to display a list of the most recent missed calls.  
2. Touch the desired missed call.  
3. Touch Call or press  
.
Call Functions  
37  
 
Saving a Missed Call to Contacts  
1. Touch Logs. A list of the most recent missed calls is displayed.  
2. Touch the desired missed call. You will see different choices,  
depending on the settings for your “Save New Contacts to” option.  
3. Touch Save New.  
For further details on saving Contacts, see “Add New Contact” on page 59.  
Sending a Message to a Missed Call  
1. Touch Logs. A list of the most recently missed calls is displayed.  
2. Touch the desired missed call.  
3. Touch Send Message.  
4. At the Create screen, touch the empty text field and use the onscreen  
alphanumeric keys to type a message.  
5. When you are finished your message, touch OK.  
6. To add additional recipients, touch the yellow recipients field. Insert  
new recipients by:  
•Press the yellow field and then enter the number manually.  
•Select from Recent Contacts.  
•Select an entry from Contacts.  
•Select members of a Group.  
7. Touch Send to initiate delivery.  
Deleting a Missed Call  
1. Touch Logs. A list of the most recently missed calls is displayed.  
2. Touch Delete.  
3. Touch the check box next to each entry you wish to select for deletion  
to place a check mark in the box. You can also touch All to place a  
check mark next to every entry.  
Call Functions  
38  
4. Touch Delete.  
Note: You can press  
at any time to exit the Missed Call feature.  
Call Time  
View Recorded Call Times  
Touch  
Call History Call Time  
The following times are displayed:  
Last Call Duration: Length of the last call.  
Dialed Calls: Total time for all voice calls made.  
Received Calls: Total time for all voice calls received.  
Total Call Duration: Total time for all calls made and received.  
To reset all fields except Total Call Duration:  
1. Touch Reset All.  
2. Touch Yes to confirm the reset.  
3. Enter your password and touch Confirm to reset the counters.  
Call Functions  
39  
   
Options During a Call  
Your phone provides a number of control functions that you can use during  
a call.  
Adjusting the Call Volume  
To adjust the earpiece volume during a call, use the Volume keys on the  
left side of the phone. Press the Up key to increase the volume level and  
the Down key to decrease the volume level.  
In Idle mode, the volume keys can be used to adjust the ringer volume.  
In-Call Options  
During an active call there are several functions available by touching a  
corresponding onscreen button.  
Speaker On/Off: Routes the phone’s audio through either the speaker  
or the earpiece.  
•Slide Speaker to On to route the audio through the speaker. (You can  
adjust the speaker volume using the volume keys.)  
•Slide Speaker to Off to use the phone’s earpiece.  
Mute/Unmute: Turns the onboard microphone on and off.  
•Touch Mute to mute the microphone.  
•Touch Unmute to turn the microphone on.  
Hold/Resume: Places the current active call on hold.  
•Touch Hold to place the call on hold.  
•Touch Resume to return to the call.  
Dial: Displays the onscreen keypad, where you can choose to Save the  
entered number to Contacts, Send a new text message, or initiate a new  
call.  
Contacts: Displays your current Contacts entries.  
More: Accesses additional in-call options such as:  
Call Functions  
40  
   
•Save to Contacts to store the current phone number into Contacts.  
•Send Message to send a new text message.  
•Memo to write a memo concerning this call.  
Placing a Call on Hold  
You can place the current call on hold at any point during a conversation.  
You can also make another call while you have a call in progress if your  
network supports this service.  
To put a call on hold:  
1. While on a call, touch Hold. This action places the current caller on  
hold (displayed onscreen as a greyed-out box).  
2. To reactivate this call, touch Resume.  
To make a call while you have a call in progress:  
1. Touch Hold.  
2. Touch Contacts to look up a number in contacts.  
- or -  
Touch Dial, enter the new number and touch New Call.  
3. Press  
to dial the second number.  
Once connected, the active call is displayed in an In Call tab and the call on  
hold in an On Hold tab.  
Switching Between Calls  
To switch between an active call and a call on hold, placing the active call  
on hold and reactivating the call that was being held, touch Swap.  
Press to end the currently active call.  
To end a call:  
1. Press the associated tab (In call or On hold).  
Call Functions  
41  
   
2. Touch  
3. Press  
to end the call.  
to end the remaining call.  
Using the Speakerphone  
To turn on the speakerphone during a call, slide Speaker to On. A screen  
prompt confirms “Speaker on?”.  
Use the volume keys (left side of the phone) to adjust the volume.  
To deactivate the speakerphone, slide Speaker to Off.  
Switching Off the Microphone (Mute)  
You can temporarily switch your phone’s microphone off so that the other  
person on the call cannot hear you. For example, you might wish to speak  
to another person in the room without the person on the call hearing you.  
To switch the microphone off, press <Mute>. The soft key indicator  
changes to Unmute and the person on the call can no longer hear you.  
To switch the microphone back on, press <Unmute>. The other person on  
the call can hear you again.  
Searching for a Number in Contacts  
You can search for a number in the Contact List during a call.  
1. Touch Contacts.  
2. Touch the Contacts entry.  
For further details on using Contacts, see “Find a Contact” on page 63.  
Call Waiting  
Call Waiting lets you answer an incoming call while you have a call in  
progress, if your network supports this service and you have set the  
Call Functions  
42  
 
Settings Calls Voice Call Call Waiting status to  
Activated. You are notified of an incoming call by a call waiting tone.  
To answer a call while you have a call in progress:  
1. Press  
put on hold.  
to answer the incoming call. The first call is automatically  
2. To switch between the two calls, touch Swap.  
To end a call on hold  
1. Touch the On hold tab and touch  
adjacent to the caller you wish  
to disconnect.  
2. Press  
to end the current active call.  
Making a Multi-party Call  
Multi-party calling is a network service that lets multiple people take part  
simultaneously in a multi-party or “conference” call.  
Note: Please contact your service provider to determine if multi-party calling is supported.  
To set up the multi-party call:  
1. Call the first participant in the normal manner (see “Making a Call” on  
2. To call another participant, touch Dial. Enter the new number and  
press  
or touch New Call to dial the second call.  
3. To add this person to the call, touch Join.  
4. To continue adding people to the call, repeat steps 2 and 3 above.  
You can also add incoming callers by answering the call and touching  
Join.  
Call Functions  
43  
   
To have a private conversation with one participant:  
1. Touch Split.  
2. Touch the number of the person you wish to talk with.  
3. You can now talk privately to that person. The other participants can  
still converse with each other.  
4. To return to the multi-party call, touch Join.  
5. All the call participants can now hear each other.  
To remove a participant:  
Touch  
adjacent to the caller you wish to disconnect. Repeat this step  
as necessary. The call to each removed participant is ended but you can  
continue to talk to the others.  
To end the call:  
When you want to end a multi-party call, press  
.
Call Functions  
44  
Entering Text  
This section outlines how to select the desired text entry mode when  
entering characters using the QWERTY keyboard or keypad. It also  
describes how to use the T9 predictive text entry system to reduce the  
number of key strokes needed to enter text.  
The A886 is equipped with an orientation detector that can tell if the phone  
is being held in an upright (portrait) or sideways (landscape) orientation.  
This is useful when entering text. If the phone is sideways, the QWERTY  
keyboard is displayed. When upright, the alphanumeric keypad is shown.  
The A886 also provides handwriting recognition to further simplify the task  
of text entry.  
Using the QWERTY Keyboard  
From a screen where you can enter text, rotate your phone  
counterclockwise to a Landscape orientation. The onscreen QWERTY  
keyboard displays.  
Text Input Mode  
Text Input Selector  
T9 Mode Selector  
New Paragraph  
Entering Text  
45  
         
Your phone has the following text input modes (indicated near the top right  
corner of the display when text entry is allowed):  
Alphabet modes (ABC, abc, Abc): Let you enter letters in all upper  
case, all lower case, or initial capital format by pressing the keypad keys.  
T9 modes (T9Ab, T9AB, T9ab): T9 predictive input lets you enter words  
by entering a few letters then selecting the word from a pop-up list.  
Note: The letter E or F is added in the middle of T9 modes to indicate whether the phone  
language is set to English or French (e.g., T9Eab, T9Fab).  
Number/Symbol mode (123Sym): Activates the number and symbol  
keys.  
Emoticons (Emo): Activates the emoticon keys.  
Using Abc Mode  
To enter text using Abc (alphabet) mode:  
1. Rotate your phone counterclockwise to Landscape orientation.  
2. Touch the Text Input Mode button at the bottom left of the screen until  
it says 123Sym. If the Text Input Mode Indicator at top right corner of  
the screen indicates one of the T9 modes, press the T9 Mode Selector  
to turn T9 mode off. The Text Input Mode Indicator should now indicate  
one of the alphabet modes (ABC, abc or Abc).  
3. Touch the desired letters.  
To enter text in lower case, touch Shift until the Text Input Mode  
Indicator is abc.  
To enter text in sentence mode (first letter entered and the first letter  
after each period are upper case), touch Shift until the Text Input  
Mode Indicator is abc.  
To enter all text in upper case, touch Shift until the Text Input Mode  
Indicator is ABC. Press space to enter a space.  
Entering Text  
46  
   
4. Touch the desired letters.  
Note: Whenever you enter a period (.) and then a space, the text input mode defaults to Abc  
(sentence mode).  
5. Touch OK to complete the message and return to the previous screen.  
Using T9 Mode  
To enter text using T9 (predictive input) mode:  
1. Rotate your phone counterclockwise to Landscape orientation.  
2. Touch the Text Input Mode button at the bottom left of the screen until  
it says 123Sym. If the Text Input Mode Indicator at top right corner of  
the screen indicates one of the alphabet modes, press the T9 Mode  
Selector to turn T9 mode on (indicator on the T9 key turns green). The  
Text Input Mode Indicator should now indicate one of the T9 modes  
(T9Ab, T9AB, T9ab).  
3. Start entering the letters of the word. As you type, the built-in dictionary  
matches the letters to commonly used words and a pop-up list of words  
appears.  
4. Use the up and down navigation keys to scroll through the list until the  
correct word is shown, then touch the word. If the word is not in the list,  
continue typing letters until it appears or you have entered the entire  
word.  
Entering Text  
47  
 
5. Press Space to insert a space, then start entering the next word.  
Using 123Sym Mode  
1. Rotate your phone counterclockwise to a Landscape orientation.  
2. Touch the Text Input Mode button at the bottom left of the screen until  
it says Text Input. The Text Input Mode Indicator at top right corner of  
the screen reads 123Sym.  
3. Touch the desired numbers and symbols. Use the left or right arrow to  
view additional symbols.  
4. To return to text input, touch the Text Input Mode button at the bottom  
left of the screen. To complete the message and return to the previous  
screen, touch OK.  
Using EMO Mode  
1. Rotate your phone counterclockwise to a Landscape orientation.  
2. Touch the Text Input Mode button at the bottom left of the screen until  
it says Text Input. The Text Input Mode Indicator at top right corner of  
the screen reads 123Sym.  
3. Touch Emo.  
4. Touch the desired symbol. Use the left or right arrow to view additional  
symbols.  
5. To return to text input, touch the Text Input Mode button at the bottom  
left of the screen. To complete the message and return to the previous  
screen, touch OK.  
Entering Text  
48  
   
Using the Alphanumeric Keypad  
Using T9 Predictive Text  
To enter text using T9 (predictive input) mode:  
1. Hold your phone in upright (Portrait) orientation.  
2. Touch the screen to open the keypad. If the Text Input Mode button at  
the bottom right of the screen says T9ab, move to step 4.  
3. Touch the Text Input Mode button at the bottom right of the screen  
and touch T9 Predictive Text.  
4. Start entering a word by pressing the numeric keys. Press each key  
only once for each letter.  
Example: To enter “HELLO”, press  
[
], [  
], [  
], [  
] and [  
].  
As you type, the built-in dictionary matches the letters to commonly  
used words and a pop-up list of words appears.  
5. Use the up and down navigation keys to scroll through the list until the  
correct word is shown, then touch the word. If the word is not in the list,  
continue typing letters until it appears or you have finished entering the  
word, at which time you can add the word to the phone’s dictionary (see  
below)  
.
6. Press Space to insert a space, then start entering the next word.  
To add a new word to the T9 dictionary:  
1. Scroll to the bottom of the pop-up list and touch Add Word.  
2. Enter the word you want (text entry in this field is in Alphabet mode,  
see below for instructions).  
3. Press OK. The word is added to the T9 dictionary and becomes the  
first word for the associated key presses.  
Entering Text  
49  
   
Using Abc Mode  
1. Hold your phone in upright (Portrait) orientation.  
2. Touch the screen to open the keypad. If the Text Input Mode button at  
the bottom right of the screen says abc, move to step 4.  
3. Touch the Text Input Mode button at the bottom right of the screen  
and touch Abc Mode.  
4. Touch the keys labeled with the character you want:  
• Once to enter the first character  
• Twice in quick succession for the second character  
• Three times in quick succession for the third character  
• Four times in quick succession for the fourth character  
Press Space to enter a space.  
5. Touch OK to complete the message and return to the previous screen.  
Using Numeric Mode  
1. Hold your phone in upright (Portrait) orientation.  
2. Touch the screen to open the keypad. If the Text Input Mode button at  
the bottom right of the screen says 123, move to step 4.  
3. Touch the Text Input Mode button at the bottom right of the screen  
and touch Numeric.  
4. Touch the keys labeled with the number or symbol you want.  
5. Touch OK to complete the message and return to the previous screen.  
Using Symbols Mode  
1. Hold your phone in upright (Portrait) orientation.  
2. Touch the screen to open the keypad. If the Text Input Mode button at  
the bottom right of the screen says SYM, move to step 4.  
Entering Text  
50  
3. Touch the Text Input Mode button at the bottom right of the screen  
and touch Symbols.  
4. Touch the keys labeled with the symbol you want. Use the left or right  
arrow to view additional symbols.  
5. Touch OK to complete the message and return to the previous screen.  
Using Handwriting Recognition  
Handwriting mode uses a handwriting recognition program to allow you to  
enter characters by drawing them on the screen with your finger.  
Start Handwriting Recognition  
1. From a screen where you can enter text, touch the Input Select field.  
2. On the drop-down list touch Handwriting.  
Entering Text  
51  
   
Change Input Modes  
To change the text input mode, touch the Text Input Mode button at the  
bottom right of the screen and touch the mode that you require. The  
available text input modes are:  
ABC: The phone interprets all characters entered as upper case.  
Abc: The phone enters words with the initial character in upper case and  
the remaining characters in lower case.  
abc: The phone interprets all characters entered as lower case.  
Numeric: The phone interprets all characters entered as numbers.  
Symbols: The phone interprets all characters entered as symbols.  
Entering Characters  
1. Change the text input mode to ABC, Abc or abc (see above).  
2. Use your finger tip to write each character.  
Touch Shift to change the case of the next letter.  
Touch Space or draw a horizontal line from left to right across the  
screen with your finger to create a space between letters, numbers,  
or symbols.  
Touch  
or draw a horizontal line from right to left across the  
screen with your finger to erase a single character.  
Touch and hold to erase an entire word or line.  
Draw a diagonal slash (/) across the screen to enter a paragraph  
return.  
Note: To allow characters to be properly recognized and to prevent scratching the LCD, draw  
each character individually (“print”), do not use cursive writing.  
3. When you are finished entering characters, touch OK to complete the  
message and return to the previous screen.  
Entering Text  
52  
Entering Numbers  
1. Change the text input mode to 123 (see above).  
2. Use your finger tip to write each number.  
Touch Space or draw a horizontal line from left to right across the  
screen with your finger to create a space between letters, numbers,  
or symbols.  
Touch  
or draw a horizontal line from right to left across the  
screen with your finger to erase a single character.  
Touch and hold to erase an entire word or line.  
Draw a diagonal slash (/) across the screen to enter a paragraph  
return.  
3. When you are finished entering characters, touch OK to complete the  
message and return to the previous screen.  
Entering Symbols  
1. Change the text input mode to SYM (see above).  
2. Use your finger tip to draw each symbol.  
Touch Space or draw a horizontal line from left to right across the  
screen with your finger to create a space between letters, numbers,  
or symbols.  
Touch  
or draw a horizontal line from right to left across the  
screen with your finger to erase a single character.  
Touch and hold to erase an entire word or line.  
Draw a diagonal slash (/) across the screen to enter a paragraph  
return.  
3. When you are finished entering characters, touch OK to complete the  
message and return to the previous screen.  
Entering Text  
53  
Transferring Files  
You can transfer music, pictures, video clips and other files between your  
phone and a personal computer in several ways, including:  
using a USB cable  
using Bluetooth  
using a microSD card reader  
Transferring Files via USB Cable  
Using PC Studio  
File transfer between your phone and a PC or card using Samsung’s PC  
Studio software (included with your phone) requires a PC with available  
USB port, installation of PC Studio on the PC, and a USB cable.  
Note: For more information on Samsung PC Studio software, consult the online help provided  
with the program.  
Note: Your phone’s USB Setting must be set to PC Studio or Ask on Connection to use PC  
1. Start the PC Studio software.  
2. Connect the USB cable to a USB port on your PC and to your phone.  
USB Mode set to Ask on Connection: the Ask on Connection  
window appears on the phone. Touch PC Studio and then Select.  
When the software connects to the phone, a popup displays “SGH-  
A886 has been connected” then the SGH-A886 icon appears.  
USB Mode set to PC Studio: When the software connects to the  
phone, a popup on the PC displays “SGH-A886 has been  
Transferring Files  
54  
             
connected” then the SGH-A886 icon appears on PC Studio’s  
Communicator screen.  
3. In the PC Studio program, click on the SGH-A866 icon. The Phone  
Explorer window appears.  
4. Using Phone Explorer, navigate to the phone folder you want to  
access.  
5. At the left side of the Communicator screen, Click the My Computer  
icon to view file folders on the PC. Navigate to the PC folder you want  
to access.  
6. You can now drag and drop files between phone and PC folders.  
Using Mass Storage Mode  
You can also transfer files between a microSD card in your phone and a  
PC using a USB cable and Microsoft Windows using the following  
procedure.  
Note: Your phone’s USB Setting must be set to Mass Storage or Ask on Connection (see “Select  
1. Connect the USB cable to a USB port on your PC and to your phone.  
USB Mode set to Ask on Connection: the Ask on Connection  
window appears on the phone. Touch Mass Storage then touch  
Select. “Connected” appears on the phone display.  
USB Mode set to Mass Storage: “Connected” appears on the  
phone display.  
2. Open My Computer on the PC. The list of contents will include a  
“Removable Disk” with the name of the microSD card in your phone.  
3. Double click the disk icon to view the contents of the card. You can  
drag and drop files between the computer and the folders on the card.  
Transferring Files  
55  
     
Transferring Files via Bluetooth  
File transfer between your phone and a PC using Bluetooth requires a PC  
with Bluetooth wireless capability and installation of Samsung’s PC Studio  
software (included with your phone).  
Note: For more information on Samsung PC Studio, consult the online help provided with the PC  
Studio software.  
To transfer files using Bluetooth:  
1. Establish a Bluetooth connection between the phone and PC (see  
Note: To receive data via Bluetooth, your phone’s Bluetooth feature must be active. For more  
information on activating Bluetooth on your phone, see “Activation” on page 159.  
2. Start the PC Studio software.  
3. Click Search device to open the Connection Wizard and scan for  
connected devices. When the name of the phone (SGH-A886)  
appears, highlight the name and click Connect.  
4. When the SGH-A886 icon appears, click the icon. The Phone Explorer  
window appears.  
5. Using Phone Explorer, navigate to the phone folder you want to  
access.  
6. Click the My Computer icon at the left side of the screen to view file  
folders on the PC. Navigate to the PC folder you want to access.  
7. You can drag and drop files between phone and PC folders.  
Transferring Files  
56  
     
Transferring Files via microSD Card  
You can directly transfer music and other files between your PC and a  
microSD memory card.  
1. Remove the microSD card from your phone (see “Installing the Memory  
Card” on page 4) and insert it into your PC’s microSD card reader or, if  
you are using an SD card reader, insert the microSD card into a  
microSD adapter then insert the adapter into the SD card reader.  
2. Open My Computer on the PC. The list of contents will include a  
“Removable Disk” with the name of the microSD card.  
3. Double click the disk icon to view the contents of the card. You can  
drag and drop files between the computer and the folders on the card.  
Note: The first time that a microSD card is inserted into your phone, your phone automatically  
creates a series of folders on it for file storage: Audio (Music, Recorded Audio, Ringtones),  
Pictures and Videos.  
Transferring Music Using Media Player  
This procedure allows you to synchronize music files between a memory  
card in your phone and Windows Media Player on a PC using Microsoft  
MTP (Media Transfer Protocol), which transfers media files and associated  
metadata to/from devices with optional additional support for remote  
control of the device, reading and setting of device parameters such as  
special DRM-related device parameters for restricted content.  
Note: Your phone’s USB Setting must be set to Media Player or Ask on Connection to use this  
1. Connect the USB cable to a USB port on your PC and to your phone.  
USB Mode set to Ask on Connection: the Ask on Connection  
window appears on the phone. Touch Media Player and then  
Select. “Connected” appears on the phone display.  
Transferring Files  
57  
           
USB Mode set to Media Player: “Connected” appears on the phone  
display.  
2. Open Windows Media Player on the PC and click the Sync tab. The  
list of devices at the right side of the screen will include your phone  
(SGH-A886).  
3. Drag and drop the files you want to transfer to your phone to the Sync  
List at the right side of the screen.  
4. Click the Start Sync button to download the selected music to your  
memory card. “Synchronizing” is displayed in Windows Media Player  
while file transfer is in progress.  
Note: Do not unplug the USB connector from the phone or PC while files are being transferred or  
you may corrupt the files.  
5. When file transfer is complete, unplug the USB connector from the  
phone.  
Transferring Files  
58  
Contacts  
The Contacts menu is used to manage your contact list. You can store  
names, phone numbers and other information in both your SIM card and  
your phone’s memory, which are physically separate but both used to  
create the contact list. You can also create contact groups, an FDN list, and  
speed dial numbers.  
Note: When you change phones, numbers stored in your SIM card memory are automatically  
available with the new phone, whereas numbers stored in the phone’s memory must be re-  
entered or transferred using a data kit accessory. However, contacts stored on the phone can  
include additional details that can not be stored on the SIM card.  
Note: When storing an Address Book entry in your SIM card, only the name, phone number,  
group, and slot location are initially available as fields (some SIM cards allow an address as  
well). Although you may add additional fields to a SIM entry; if you move that SIM card to another  
model phone, it is possible that only the basic information will be transferred.  
Add New Contact  
Use the following procedures to store a new contact to your phone or SIM  
card.  
Note: Your phone can be set to automatically save contacts to your Phone, automatically save to  
your SIM Card, or Ask on Saving. The default setting is Phone. The following procedures  
assume that the phone is set to Ask on Saving. To change the setting, see “Save New Contacts  
Store a Number in Phone Memory  
1.  
Forrotomucthhe Idle screenC, toonutcahcCtsontacAtsddNeCwreCaotnetCacotntactPhonPeh. oTnhee  
Add New Contact screen opens.  
Contacts  
59  
           
2. To assign a picture to the entry, touch the image area at the top of the  
screen and choose Take Photo to take a picture or Caller Image to  
retrieve a previously stored image from your Pictures folder.  
3. Touch the First Name field, use the onscreen keyboard to enter the  
first name for the new entry, then touch OK.  
4. Touch the Last Name field, use the onscreen keyboard to enter the  
last name for the new entry, then touch OK.  
5. Touch the Display Name field, use the onscreen keyboard to enter the  
name you want to appear onscreen when you receive a call from this  
contact, then touch OK.  
6. Touch the Mobile field, use the onscreen keypad to enter the mobile  
phone number for the entry, and touch OK. You can also change the  
category type for this field (touch  
Others).  
and choose Home, Work, Fax or  
7. In a similar manner, to add information to any of the remaining fields  
touch the field, enter the information or make a selection and touch OK.  
The available fields are:  
Email: Stores an email address for this contact.  
Group: Assigns this contact to group. For information on using  
Ringtone: Assigns a ringtone for this contact. Touch a music file to  
play a sample. Touch Add to complete the selection.  
Vibration: assigns a vibration type for this contact information. Touch  
a setting (Vibration 1 - 5) to sample. Touch Save to complete the  
selection.  
Birthday: Records the calendar date for the contact’s birthday. Touch  
each box (Month, Day, Year) and use the keypad to enter the  
number. Touch Save to store the date.  
Note: Allows you enter any other information for contact.  
8. When you have finished entering information, touch Save to store the  
new entry in Contacts.  
Contacts  
60  
Add More Fields to a Number  
While creating a new entry to be saved on the phone or editing an existing  
contact saved on your phone, you can add additional fields to the list of  
information.  
Note: A miximum of five phone numbers can be saved with each contact.  
1. On the Contacts screen, touch Add More Fields.  
2. Touch the check box next to each field you wish to add to place a  
check mark in the box. You can also touch All to place a check mark  
next to every entry. The available fields are:  
Mobile: Adds an additional Mobile number field.  
Home: Adds an additional Home number field.  
Work: Adds an additional Work number field.  
Fax: Adds an additional Fax number field.  
Others: Adds an Others field.  
Email: Adds an additional contact Email address field.  
URL: Adds a Web site URL.  
DTMF: Adds a DTMF tone string for use with this contact.  
Group: Adds an additional group field for group assignment.  
Message Tone: Adds a field used to assign a message tone that  
sounds when messages are received from this contact.  
NickName: Adds a field that can be used to enter a nickname for the  
contact. The nickname is not displayed when calls are made to or  
received from the contact.  
Company: Adds a Company field.  
Job Title: Adds a Job Title field.  
Address - Home: Adds a field used to record a physical home  
address for this contact.  
Address - Work: adds a field used to record a physical work address  
for this contact.  
Contacts  
61  
3. Touch Done to store the new fields to the entry and return to the  
previous screen.  
Delete Fields From a Number  
1. On the Contacts screen, touch Delete Fields.  
Note: Only certain new fields can be deleted. If you have not added any new fields to the  
contact, the Delete Fields button does not appear.  
2. Touch the check box next to each field you wish to add to place a  
check mark in the box.  
3. Touch Delete.  
4. Touch Save to store the modified contact.  
Store a Number in the SIM Card  
1.  
FCraormd othretoIdulcehscreen, touchCoCnotnatcatcstsAdCdreNaetewCCoonntataccttSSIMIM  
Card. The Add New Contact screen opens.  
2. Touch the Name field, use the onscreen keyboard to enter the name  
for the new entry, then touch OK.  
3. Touch the Phone Number field, use the onscreen keypad to enter the  
phone number for the contact, and touch OK.  
4. Touch the second Phone Number field, use the onscreen keypad to  
enter another phone number for the entry, and touch OK. You can also  
change the category type for this field (touch  
Home, Mobile, Fax or Other).  
and choose Work,  
Save a Number During a Call  
To save a number while on a call:  
1. Touch More Save to Contacts.  
Contacts  
62  
 
2. Touch New if this is a new contact entry, Update if you are updating an  
existing contact.  
3. Enter the required information (see above).  
Save a Number After a Call Has Ended  
1. Touch  
screen.  
(or  
Call History) to bring up the recent calls  
2. Touch the phone number to reveal the Details page for the call.  
3. Touch Save, and then New if this is a new contact entry, Update if you  
are updating an existing contact.  
4. Enter the required information (see above).  
Add Pauses to Numbers  
When you call automated systems, you are often required to enter a  
password or account number. Instead of manually entering the numbers  
each time, you can store the numbers in Contacts with pauses between  
entries.  
To add a pause between a series of numbers:  
1. Touch the screen at the place where the pause needs to be added to  
position the cursor at that location.  
2. Press and hold P to add a two-second pause. If more than two seconds  
is required, continue to press and hold P as many times as needed to  
add additional two-second pauses.  
3. Touch OK and then Save to store the change.  
Using Contacts  
Find a Contact  
1. On the Idle screen, touch Contacts.  
Contacts  
63  
   
2. If necessary, touch the Contacts Filter field (upper-right) and select  
Contacts.  
3. Within the Contacts list (sorted alphabetically by first name), drag the  
Power Search tab to quickly “thumb through” the alphabetical listing.  
Contacts  
Filter  
Power  
Search  
Tab  
4. When you find the required contact, touch  
make the call.  
adjacent to the entry to  
Contacts  
64  
 
Contact Options  
While in the details page for a specific contact, there are two sets of options  
available.  
Phone Options  
Phone Options  
Phone Options  
1. Touch  
to access phone options:  
Call: allows you to call the selected number.  
Send Message: allows you to send a text message or multimedia  
message to the selected number.  
2. Press  
to return to the previous page.  
Additional Options  
Edit: Lets you change the information for the current contact. Touch the  
field, use the onscreen keyboard to make changes, then touch OK.  
Delete: Deletes the current contact.  
More: reveals an additional set of entry options:  
Print via Bluetooth: Sends the selected contact entry information to  
a Bluetooth compatible printer.  
Contacts  
65  
Send Business Card via: Sends your Business Card information to  
the selected contact in a message, via Exchange ActiveSync, or via  
Bluetooth.  
Add to Favorites: Adds the current contact entry to your Favorites  
list.  
Groups  
Using Groups you can organize your contacts into lists such as Family,  
Friends and Work. You can also assign a unique Caller ID or ringtone to  
members of the group.  
Note: Groups stored on your phone accept contacts stored on the phone only. If your SIM card  
supports Groups, Groups stored on the SIM card accept contacts stored on the SIM card only.  
Only contacts that are stored on the phone can be added to groups.  
Create a New Group  
1. From the Idle screen, touch  
Contacts Groups   
Create Group.  
2. Touch Group Name and use the onscreen keypad/keyboard to enter a  
new group name. Touch OK to store the new group name.  
3. Touch Group Picture and choose a location for the new image:  
Take Photo: Take a picture using the built-in camera and assign it to  
this entry.  
Group Picture: Retrieve a previously stored image from your  
Pictures folder and assign it to this entry.  
4. Touch Group Ring Tone to choose an audio file for assignment to this  
group. Touch a music file to play a sample. Touch Add to complete the  
selection.  
Contacts  
66  
     
5. Touch Group Vibration to choose a vibration type for assignment to  
this group. Touch a vibration option to activate a short sample. Touch  
Save to complete the selection.  
6. Touch Save to store the new Group category.  
Add Contacts to a Group  
1. From the Idle screen, touch  
2. Touch a group entry.  
Contacts Groups.  
3. Touch Add Member.  
4. Touch the check box next to each contact you wish to add to the group  
to place a check mark in the box. You can also touch All to place a  
check mark next to every entry.  
5. Touch Add.  
Remove an Entry From a Group  
1. From the Idle screen, touch  
2. Touch a group entry.  
Contacts Groups.  
3. Touch Remove Member.  
4. Touch the check box next to each contact you wish to remove from the  
group to place a check mark in the box. You can also touch All to place  
a check mark next to every entry.  
5. Touch Remove.  
Edit Group Information  
Note: To edit a Group entry, there must be at least one member of the group.  
1. From the Idle screen, touch  
2. Touch a group entry.  
Contacts Groups.  
Contacts  
67  
 
3. Touch More Edit Group.  
4. Make modifications to the Group Name, Group Picture, Group Ring  
Tone, and Group Vibration fields as required. For more information,  
5. Touch Save to store your changes.  
Favorites  
Once you have stored phone numbers in Contacts, you can add them to  
your Favorites list.  
Add Contacts to Favorites  
1. From the Idle screen, touch  
Contacts Favorites.  
2. Touch Add.  
3. Touch the check box next to each contact you wish to add to Favorites  
to place a check mark in the box.  
4. Touch Add.  
Remove Contacts from Favorites  
1. From the Idle screen, touch  
Contacts Favorites.  
2. Touch Remove.  
3. Touch the check box next to each contact you wish to remove from  
Favorites to place a check mark in the box.  
4. Touch OK.  
Change the Order of Favorites  
1. From the Idle screen, touch  
Contacts Favorites.  
2. Touch Change Order.  
Contacts  
68  
   
3. Using your finger tip, drag and drop the entries to place them in the  
desired order.  
4. Touch OK.  
Managing Contacts  
You can copy, delete, and view the memory status for the Phone and SIM  
entries on your phone.  
Copy Contacts to SIM Card  
Note: When storing a contact on the SIM card, only the name, phone number, group, and slot  
location are initially available as fields (some SIM cards may allow an address as well). To save  
additional information for a contact, such as other phone numbers or e-mail, it is important to add  
new fields to the contact information. Also note that if you move the SIM card to a phone that  
does not support additional fields on the SIM card, this additional information is not available.  
1. From the Idle screen, touch  
Contacts SIM  
Management Copy Contacts to SIM. The phone displays the  
contacts saved to your phone.  
2. Touch the check box next to each contact you wish to copy to place a  
check mark in the box or touch All to place a check mark beside all  
contacts.  
3. Touch Copy. The selected contacts are copied to the SIM card.  
Copy Contacts from SIM Card  
1. From the Idle screen, touch  
Contacts SIM  
Management Copy Contacts from SIM. The phone displays the  
contacts saved to your SIM card.  
2. Touch the check box next to each contact you wish to add to copy to  
place a check mark in the box or touch All to place a check mark  
beside all contacts.  
3. Touch Copy. The selected contacts are copied to the phone.  
Contacts  
69  
     
Delete Contacts  
You can delete contacts saved on your phone or SIM card.  
Delete Contacts from Phone  
1. From the Idle screen, touch  
Contacts Contacts   
Delete. The phone displays the contacts saved to your phone.  
2. Touch the check box next to each contact you wish to delete to place a  
check mark in the box or touch All to place a check mark beside all  
contacts.  
3. Touch Delete. The selected contacts are deleted.  
Delete Contacts from SIM Card  
1. From the Idle screen, touch  
Contacts SIM  
Management Delete Contacts from SIM. The phone displays the  
contacts saved to your SIM card.  
2. Touch the check box next to each contact you wish to delete to place a  
check mark in the box or touch All to place a check mark beside all  
contacts.  
3. Touch Delete. The selected contacts are copied to the phone.  
Note: Fixed dial (FDN) contacts must be deleted from within the FDN list.  
Service Number  
You can view the list of SDNs (Service Dialing Numbers) assigned by your  
service provider. These numbers may include emergency numbers,  
customer service numbers, and directory inquiries.  
1. From the Idle screen, touch  
Contacts Service  
Number.  
2. To dial a number, touch  
adjacent to the entry.  
Contacts  
70  
 
Note: Service Number only appears on the menu when supported by your SIM card.  
Contacts Settings  
My Business Card  
Creates a virtual business card that can be used as an attachment to  
outgoing messages.  
1. In Idle mode, touch  
Contacts Contacts Settings   
My Business Card.  
2. Touch each field, enter information using the keypad/keyboard, and  
touch OK.  
3. Touch Save.  
Speed Dial  
Lets you set up Speed Dial for your contacts. For more information, see  
Save New Contacts to  
Defines the destination for new contact entries (Phone, SIM Card, Always  
Ask).  
View Contacts From  
Lets you filter the display of Contacts entries. Options include: All, Phone,  
SIM Card.  
Own Number  
This function is a memory aid that shows you the phone number assigned  
to the SIM card in your phone.  
Contacts  
71  
         
In Idle mode, touch  
Number.  
Contacts Contacts Settings Own  
Fixed Dial Contacts  
This selection accesses your FDN (Fixed Dialing Number) list. FDN mode,  
if supported by your SIM card, allows you to restrict outgoing calls to phone  
numbers stored in the FDN List on the SIM card.  
Note: Use of the FDN List requires a PIN2 code (contact your service provider).  
Change FDN Mode Status  
1. In Idle mode, touch  
Settings Phone Security.  
2. Under Fixed Dialing Mode touch On to enable fixed dialing or Off to  
disable the option.  
Note: With Fixed Dialing Mode enabled, you can not dial any number other than those in the  
FDN list.  
Create FDN Numbers  
1. Turn Fixed Dialing Mode on (see above).  
2. On the Idle screen, touch  
Contacts Contacts Settings  
Fixed Dial Contacts Create FDN  
3. Enter your PIN2 code and touch Confirm.  
4. Touch Name and use the keypad to enter a name for this FDN contact.  
Touch OK.  
5. Touch Phone Number and use the keypad to enter a phone number  
for this FDN contact. Touch OK.  
6. Touch the SIM card location field and use the keypad to enter a  
location value for the entry on the SIM card. Touch OK.  
Contacts  
72  
   
7. Touch Save to store the new FDN entry.  
8. Press  
to return to Idle mode.  
Memory Status  
You can check how many contacts are stored in your SIM card and phone  
memory. You can also see the maximum capacity for each category.  
From the Idle screen, touch  
Contacts Contacts  
SettingsMemory Status. The information provided includes:  
Phone: The number of contacts stored on your phone (maximum 2000).  
SIM Card: The number of contacts stored on your SIM card.  
FDN: Tells you how many entries are in saved to your FDN list.  
Note: The maximum amount of data stored in each SIM card category depends on the card.  
Contacts  
73  
 
My Account  
This menu selection opens the Internet browser and automatically  
accesses the My Account page.  
For more information on using the Internet browser, see “Internet” on  
My Account  
74  
   
Home  
This menu selection opens the Internet browser and automatically  
accesses the My Account page.  
For more information on using the Internet browser, see “Internet” on  
Home  
75  
   
Internet  
Your phone is equipped with a WAP (Wireless Application Protocol)  
browser that allows you to access the Internet. This section explains how to  
access the WAP services of your service provider and navigate the WAP  
browser.  
Open the Browser  
From the Idle screen, touch  
Internet.  
Browser Navigation  
Browser Window  
Navigation within web pages is done via touch points on the touchscreen.  
Magnification  
Navigation Toolbar  
Web Toolbar  
View Mode  
Screen View  
Note: The browser default is to display as much of the web page as possible so the Web Toolbar  
is not displayed.  
Internet  
76  
           
Back: Returns the browser to the previous web page.  
Forward: Moves the browser to the next web page.  
Home: Returns the browser to the currently assigned  
homepage.  
Reload: Reloads the current page.  
Magnify: Launches magnification slider that lets you zoom in  
and out using an onscreen slider.  
Search: launches the Google Search or Yahoo! Search  
window (depending on the preference setting, see “Set  
Add to Bookmarks: adds the current page to the Bookmarks  
list.  
Bookmarks: displays the Bookmarks list.  
Browser Settings: accesses the Browser Settings menu,  
which allows you to clear caches, delete cookies, access  
cookie options, delete history, change preferences, view the  
page details, change the browser profiles, and view  
information about the browser software.  
Fullscreen View: displays the page in fullscreen view. No  
toolbars are visible.  
Toolbar View: Displays the page with toolbars visible.  
View Mode: Toggles between PC Web view and Mobile  
view.  
Internet  
77  
Change Web Page Orientation  
The A886 is equipped with an orientation detector that can tell if the phone  
is being held in an upright (portrait) or sideways (landscape) orientation.  
Hold the phone upright to see a portrait view of the current page  
Turn the phone on its side to see a landscape/widescreen view of the  
same page.  
Change Screen Modes  
By default, only the Toolbar View icon is displayed on the screen when the  
browser is opened.  
Touch the Toolbar View icon to reveal the Web toolbar.  
When the toolbar is displayed, touch the Fullscreen View icon to hide  
the Web toolbar.  
Magnify the Page  
To change the screen magnification:  
1. If the Toolbar View icon is displayed, touch the icon to reveal the Web  
toolbar.  
2. Touch  
in the upper-right corner of the screen.  
3. Touch and drag the magnification slider (at the bottom when in  
landscape mode, on the left in portrait mode) to zoom in and out on the  
page.  
Scroll the Page  
To scroll the screen image around on a Web page, press your fingertip  
firmly on the screen and then drag in the direction you want to move the  
page.  
Internet  
78  
Note: The page must be magnified enough that there are unseen areas. If the entire page is  
already being displayed, the image will not move when you attempt to scroll.  
Select Onscreen Items  
To select a hyperlink appearing on the screen, touch the link.  
Enter Text in a Search or Text Field  
Touch an onscreen text field (such as the Navigation Toolbar) once to  
reveal the cursor and onscreen keyboard.  
Touch a search field on a Web page twice to display the cursor and the  
onscreen keyboard. For more information on text entry methods, see  
Return to Page  
To return to the previous page, touch  
To return to the homepage, touch  
.
.
Access a Web Site  
1. From the Idle screen, touch  
Internet.  
2. Touch the URL text field at the top of the screen.  
3. Using either the onscreen alphanumeric keypad or keyboard, enter the  
complete Web address, beginning with www. (the http:// prefix is  
pre-inserted into the text string).  
4. Touch Go to open the web page.  
Internet  
79  
   
Bookmarks  
While navigating through either the Internet or Mobile Web pages, you can  
bookmark a site to quickly and easily access it at a future time. The URLs  
(web site addresses) of bookmarked sites are stored in the Bookmarks  
folder.  
There is also a series of preset bookmarks in the Bookmarks folder:  
Yahoo!  
Facebook  
Twitter  
MySpace  
RingBacks  
Wikipedia  
craigslist.ca  
Get New Games  
Get New Ringtones  
Access a Web Site Using Favorites  
1. From the Idle screen, touch  
Internet   
.
2. Touch the bookmark for the site you want to open.  
Add Favorites  
1. From the Idle screen, touch  
or  
Internet   
touch  
Internet   
Add New.  
2. Touch the Enter URL Address field and use the onscreen keypad or  
keyboard to enter the desired web address. Touch OK to continue.  
Internet  
80  
   
3. Touch the Title field to associate a display name for this link. Use the  
onscreen keypad or keyboard to enter a title for the web site. Touch OK  
to continue.  
4. Touch Save to store the new bookmark.  
Edit Bookmarks  
1. From the Idle screen, touch  
2. Touch adjacent to the bookmark to be edited (do not touch the  
name as this will launch the assigned web site).  
Internet   
.
Note: Only entries with  
beside can be edited.  
3. Touch the field to be edited and use the onscreen keypad or keyboard  
to make the changes (for more information on text entry, see “Entering  
4. Touch Save to save the changes to the entry.  
Delete Bookmarks  
1. From the Idle screen, touch  
2. Touch Delete.  
Internet   
.
3. Touch the check box next to each bookmark you wish to add delete to  
place a check mark in the box or touch Select all to place a check mark  
beside all bookmarks.  
4. Touch Delete.  
Copy URL to a Message  
You can copy any URL saved as a bookmark into a message.  
1. From the Idle screen, touch  
Internet   
More  
Copy URL to Message.  
Internet  
81  
2. Touch the button next to the bookmark you wish to copy to highlight the  
button.  
3. Touch Done.  
4. Enter any additional message text using the onscreen keypad/  
5. Touch the Tap to Add Recipient field and use the onscreen keypad/  
keyboard to enter or select the recipient’s phone number.  
or  
Touch Send to to open the Recipient List screen, where you can add  
addresses from Contacts or Groups  
Sending a URL  
A selected URL can also be sent as a file attachment to a new multimedia  
message or transmitted to any paired Bluetooth device that can receive  
data.  
1. From the Idle screen, touch  
Internet   
More  
Send URL via.  
2. Touch one of the following options and follow the onscreen prompts to  
complete the process:  
Message: Attaches the selected URL to a new multimedia message.  
Exchange ActiveSync: Synchronizes data with a PC running  
Microsoft Windows and Microsoft Exchange ActiveSync.  
Bluetooth: Sends the selected URL as a data file to a paired  
Bluetooth device capable of receiving the file.  
3. Touch the button next to the bookmark you wish to copy to highlight the  
button.  
4. Touch Done.  
Internet  
82  
Browser Settings  
To configure browser settings:  
1. From the Idle screen, touch  
Internet   
.
2. Touch the menu item you want to open. The Browser Settings menu  
provides the following selections:  
Clear Caches: Deletes the information stored in the phone’s cache  
of recently accessed Web pages (see below).  
Delete Cookies: Cookies are pieces of personal information sent to  
a web server while navigating the web (see “Delete Cookies” on  
Cookie Options: sets whether cookies are stored on your phone  
(Accept All or Reject All). If you select Prompt, the phone will ask you  
to save the cookies on every page requiring cookies (see “Set  
Delete History: deletes the record of any previously visited web  
Preferences: changes the settings for the web browser to suit your  
Page Details: Provides details for the displayed page (Title,  
Address, Size, Last Updated).  
Browser Profiles: Allows changing the current browser profile.  
About Browser: displays the access version and copyright  
information about the browser.  
3. Touch Yes to activate a feature, Save to save a new setting.  
Clear Caches  
A cache is temporary memory in which the most recently accessed web  
pages (and their associated images) are stored. The cache can be cleared  
at any time.  
Internet  
83  
     
1. From the Idle screen, touch  
Internet   
Clear  
Caches.  
2. Touch Yes to continue, No to cancel the operation.  
Delete Cookies  
A cookie is a small file placed on your phone by a web site while you are  
visiting the site. In addition to containing some site-specific information, it  
can also store some personal information (such as username and  
password for the site), which can pose a security risk if not properly  
managed. Cookies can be deleted at any time.  
1. From the Idle screen, touch  
Internet   
Delete  
Cookies.  
2. Touch Yes to continue, No to cancel the operation.  
Set Cookie Options  
Cookie options define how cookie installation is managed when a web site  
is attempts to place them on your phone.  
1. From the Idle screen, touch  
Internet   
  
Cookie Options.  
2. Touch one of the following options:  
Accept All: Phone accepts all cookies.  
Reject All: Phone accepts no cookies.  
Prompt: You are prompted to accept or reject each cookie.  
3. Touch Save to save the new setting.  
History List  
The History list provides you with a list of the most recently visited web  
sites. These entries can be used to quickly return to a previously accessed  
web page without the need to retype the entire address.  
Internet  
84  
       
Access the History List  
1. From the Idle screen, touch  
Internet.  
2. If the Toolbar View icon is displayed, touch the icon to reveal the Web  
toolbar.  
3. On the navigation Toolbar at the top of the page, touch the drop-down  
arrow to open the History List.  
4. Touch an entry on the list to open the associated web site.  
Delete the History List  
You can delete all entries from the history list at any time.  
1. From the Idle screen, touch  
Internet   
Delete  
History.  
2. Touch Yes to continue, No to cancel the operation.  
Set Browser Preferences  
Browser preferences allow you to set your browser’s ability to run  
JavaScript, display images, and play sounds.  
1. From the Idle screen, touch  
Internet   
  
Preferences.  
2. Touch any of the following to change preferences.  
View Mode: Mobile View, PC Web View  
Search Options: Google Search, Yahoo Search  
Run JavaScript: On, Off  
Display Images: On, Off  
Display Flash Contents: On, Off  
Play Sound: On, Off  
Display Minimap: On, Off  
3. Touch Save to save the new setting.  
Internet  
85  
   
Page Details  
Page Details provides information on the currently displayed Web page,  
including Title, Address, Size (in bytes), MIME type (Multipurpose Internet  
Mail Extensions), and Last Updated (date the page was last changed).  
Browser Profiles  
Lets you view and change the settings for Browser Profiles: GoRogers,  
Rogers Media, Rogers Internet and Rogers Tethering. The following  
settings are available: Set Name, Access Name, Auth Type, User ID,  
Password, Protocol, Home URL, Proxy Address and Linger Time.  
Note: Do not change any settings in these profiles unless instructed to do so by your service  
provider or the Browser features may not work properly.  
About Browser  
About Browser provides browser software version information.  
1. From the Idle screen, touch  
Internet   
About  
Browser.  
2. Press  
to return to the previous page.  
Internet  
86  
 
Messages  
This section explains how to send and receive different types of messages.  
It also describes the features and functionality associated with messaging.  
Types of Messages  
Your phone sends and receives the following types of messages:  
Text messages  
Multimedia (picture and video) messages  
IM messages  
The Short Message Service (SMS) lets you send and receive text  
messages to and from other mobile phones and email addresses. To use  
this feature, you must subscribe to your service provider’s message  
service.  
The Multimedia Messaging Service (MMS) lets you send and receive  
multimedia messages (such as picture messages and video messages) to  
and from other mobile phones and email addresses. To use this feature,  
you must subscribe to your service provider’s multimedia message service.  
Note: When creating a message, adding an image, sound file or video clip to a text message  
changes the message from a text message to a multimedia message.  
Messaging icons are displayed at the top of the screen and indicate when  
messages are received and their type. For more information, see “Icons”  
Creating and Sending Messages  
1. Touch  
Messages Create New Message.  
Messages  
87  
           
2. Touch Tap to Add Recipient and select a method for adding a  
recipient:  
Enter Manually: Manually enter a cellular phone number or email  
address using the keypad and touch OK.  
Contacts: Lets you select recipients from your Contacts list (valid  
entries must have a wireless phone number or email address).  
Touch the check box next to each Contact you wish to add to place a  
check mark in the box, then touch Add.  
Recent Contacts: Lets you select recipients from a list of recently  
sent messages. Touch the check box next to each Contact you wish  
to add to place a check mark in the box, then touch Add.  
Groups: Lets you select recipients from the Group list. Touch the  
group name to enter all group members to the recipients list.  
3. To add more recipients, touch the recipient field and repeat step 2.  
4. Touch the text field and use the onscreen keypad/keyboard to enter a  
message. For more information on text entry, see “Entering Text” on  
5. Touch OK to save your text and return to the message screen.  
6. Touch Send.  
Additional Message Options  
While you are entering a message, touch Insert to view a menu of  
additional insert options.  
Picture: Allows selection of an existing image from the Pictures list.  
Touch the image name then touch Add.  
Video: Allows selection of an existing video from the Videos list. Touch  
the video name then touch Options Add.  
Messages  
88  
 
Audio: Allows selection of an existing audio file from the Audio list.  
Touch a category (Ringtones, Music, Recorded Audio), touch the file  
name then touch Add.  
Take Picture: Lets you temporarily exit the message, take a photo with  
phone’s camera, and then add it to your message. Press the camera key  
to take the picture then touch OK to add it to the message.  
Record Video: Lets you temporarily exit the message, record a video  
clip using the phone’s camera, and then add it to your message. Press  
the camera key to start and stop recording then OK to add it to the  
message.  
Record Audio: Lets you temporarily exit the message, record an audio  
clip using the phone’s microphone, and then add it to your message. Use  
the record buttons to start and stop recording then touch Add.  
Templates: Lets you insert a message template into the text. Touch the  
template name to add it to the message.  
Bookmarks: Lets you temporarily exit the message, access your  
Bookmarks list and select URLs to add to the current message. Touch  
the check box next to each bookmark to be added then touch Add.  
Contact Info: Lets you choose a Contact listing and add their  
information to the message. Touch the contact then touch Insert.  
Touch More to view additional options:  
Preview: Lets you preview the message before delivery (multimedia  
messages only).  
Slide Options: Lets you add a series of images to the message and  
configure them to display as a slideshow on the recipients phone.  
Options include: Add Slide, Delete Slide and Edit Style (multimedia  
messages only).  
Attach Files: Lets you various types of attachments to the message.  
File: Lets you to add an audio file, graphic, or video clip to your  
message as an attached file.  
Messages  
89  
Business Card: Lets you add your business card to the message as  
an attached file.  
Event: Lets you add an Event from your calendar to the message as  
an attached file.  
Tasks: Lets you add a Task to your message as an attached file.  
Memo: Lets you add a previously saved Memo (text) to your message  
as an attached file.  
Bookmarks: Lets you to add a bookmark as an attachment to the  
message.  
Add Subject/Remove Subject: Lets you add a subject field to the  
message or delete the subject field (multimedia messages only).  
Save to Drafts: Saves the message to the Drafts folder.  
Save as Template: Lets you save the message as a template for later  
reuse.  
Delivery Options: allows you to configure delivery options associated  
with sending the message (Priority, Expiration, Delivery Time, Get  
Delivery Report, Get Read Report, Keep a Copy).  
View Received Messages  
New Messages  
On the idle screen, new messages are indicated by the New Messages  
pop-up and by icons in the indicator area and Widget bar (see “Display  
To view new messages:  
1. Touch View on the New Messages pop-up.  
2. Touch the message you wish to view. The message appears in the  
display.  
Messages  
90  
 
When viewing a text message, press the Up or Down volume keys to  
increase or decrease the font size of the message text. Six font sizes  
are available.  
To play a multimedia message, touch  
.
To pause playback of the multimedia message, touch.  
To stop playback of the multimedia message, touch Stop.  
To scroll through the message (if additional text pages have been  
added), touch the screen and in a single motion, scroll up or down  
the onscreen page.  
3. When you have finished, press  
.
Note: If you accidentally exit from the notification screen, go to Menu Messages Inbox to  
view the new messages.  
Message Folders  
All incoming and outgoing text and picture messages are saved in a series  
of folders on your phone.  
Inbox: Stores received text and picture messages.  
Outbox: Temporarily stores messages your phone is attempting to  
send. It also stores messages that you have created and configured to  
be sent some time in the future. Outbox messages are moved to the  
Sent folder after they are successfully sent.  
Sent: Stores messages you have sent successfully.  
Drafts: Stores unsent messages you have saved as drafts. You can  
access these drafts and send them at a later time.  
Templates: Accesses message files saved as templates. For  
To view a message stored in one of the message folders:  
Messages  
91  
   
1. From the Idle screen, Touch  
Messages message  
folder (Inbox, Sent, Outbox, Drafts or Templates). The  
corresponding message list opens.  
2. Touch the message you wish to view. The message appears in the  
display.  
Message Folder Options  
While viewing a message list, the following options are available:  
List by: Lets you sort the list by Date, Sender, Read/Unread, Type,  
Subject, Size, or Lock/Unlock status (selection varies with the type of  
message):  
Delete: Lets you delete one or more messages. Touch the check box  
next to each message to be added or touch Select all to place a check  
mark beside all messages, then touch Delete.  
Message Options  
While viewing a message, the following options are available:  
Reply/Reply to: Lets you compose and send a reply to the message.  
Delete: Deletes the current message.  
More: Provides a menu additional message functions.  
Forward: Lets you forward the message.  
Save to Contacts: allows you to save the recipient or sender’s  
information from the message to Contacts as either a New or  
Updated entry. For more information, see “Contacts” on page 59.  
Save as Template: Lets you save message content as a template.  
Move to Phone/Move to SIM card: If a message is stored in the SIM  
card, it is saved to the phone’s memory. If a message is stored in the  
phone’s memory, it is then saved to the SIM card.  
Print via Bluetooth: Lets you to print the contents of the message on  
a Bluetooth compatible printer.  
Messages  
92  
•Save Attachment: Lets you save the attachment to Phone or  
Memory Card (multimedia message only).  
•Properties: Displays the properties of the message: Subject, Date,  
From, To, Size, Priority, Delivery Report, Read Report (multimedia  
message only).  
Lock/Unlock: allows you to secure a selected message by protecting  
it from accidental alterations.  
MobileMail  
MobileMail lets you send email to any email address. Recipients can  
access your emails from email-equipped phones or from their computers.  
The messages you create can contain text only.  
Your phone allows selection of three online email services: Rogers Yahoo!  
Mail, Yahoo! Mail or Windows Live Hotmail. Follow the online instructions  
shown on your display after you launch this service.  
IM  
Instant Messaging or IM is a way of sending short, simple messages that  
are delivered immediately to other users. To use this feature, you must be  
subscribed to a message service. For further details, contact your service  
provider  
Friends  
This menu selection opens the Rogers Friends Web page. Follow the  
online instructions shown on your display.  
Messages  
93  
             
Exchange ActiveSync  
Microsoft™ Exchange ActiveSync™ lets you wirelessly synchronize email,  
calendar items, and contacts on a Microsoft™ Exchange Server 2003 or  
2007 with corresponding information in your phone. Using “push”  
technology, all changes are automatically and immediately synchronized.  
You can also synchronize manually or at specific time intervals.  
Note: You will require the following information to enable Exchange ActiveSync: mail server  
address, domain name, whether your company or email provider requires an encrypted (SSL)  
connection, user name, and password. Contact your IT department or service provider if necessary.  
Note: The A886 phone can only connect to one Microsoft Exchange server, such as at you work  
location or a consumer service provider such as Gmail. Changing servers will delete all contact  
information saved on the phone. Before deleting the saved Exchange client in order to connect to  
a different Exchange server, be sure to back up your contacts to your SIM card or to a PC.  
ActiveSync Setup  
1. From the Idle screen, press  
and select Messages   
Exchange ActiveSync.  
Messages  
94  
   
2. Enter your server information (Server URL, User name, Password,  
Domain). Touch the entry fields and use the keypad/keyboard to enter  
the required information. Select whether to use SSL (touch On or Off).  
3. Touch Save.  
Messages  
95  
4. In the Active Sync Profile screen, touch Rogers Internet to select the  
connection APN and connect to your Exchange server. The Exchange  
ActiveSync client opens.  
5. Select the information to be synchronized (Email, Calendar, Task,  
Contacts) and the Sync Settings (Server Settings, Sync schedule, Email  
options, Calendar options, Tasks options, Contacts options) as required  
.
Messages  
96  
6. Touch Sync on the Exchange ActiveSync client screen to begin using  
Exchange Activesync.  
Note: SSL (Secure Socket Layer) helps protect your data so use is recommended.  
Templates  
Templates let you save and reuse commonly used content for text and  
picture messages. For further details on sending messages, see  
Create a Text Template  
1. From the Idle screen, press  
and select Messages  
Templates.  
2. Touch Text Templates.  
3. Scroll to an Empty template location and touch Create to open a blank  
template. Using the onscreen keypad/keyboard, enter the text you want  
to save as a template.  
4. When you are finished entering text, touch Save to save the template  
file.  
Create a Multimedia Template  
1. From the Idle screen, press  
and select Messages   
Templates.  
2. Touch Multimedia Templates.  
3. Scroll to an Empty template location and touch Create to open a blank  
template. Using the onscreen keypad/keyboard, enter the text you want  
to save as a template.  
Messages  
97  
       
4. Touch Insert to include any of the following: Picture, Video, Audio,  
Take PIcture, Record Video, Record Audio, Template, Bookmarks,  
Contact Info.  
5. When you are finished, touch More Save as Template to save the  
template file.  
Use a Template  
To insert a template into a message:  
1. While entering message content (see “Creating and Sending  
Messages” on page 87), touch Insert Templates.  
2. Touch a template to enter the content directly into the message.  
Voice Mail  
This menu selection accesses your voice mailbox, if your account supports  
this service.  
Note: Voice mail is a network feature. Please contact your service provider for further details.  
Messaging Settings  
Lets you configure default message settings.  
1. From the Idle screen, touch  
Messages Messages  
Settings.  
Auto Delete Inbox  
When you select the Auto Delete Inbox option, inbox messages will be  
deleted automatically without a warning message.  
1. From the Messages Settings page, touch Auto Delete Inbox.  
2. Touch one of the available setting fields:  
Messages  
98  
       
Off: Messages will not be deleted automatically.  
1 Week Old: Read messages more than one week old will be  
deleted automatically.  
2 Weeks Old: Read messages more than two weeks old will be  
deleted automatically.  
The Oldest when Full: The oldest message will be deleted  
automatically when the Inbox is full.  
3. Touch Save to store the selected option.  
Text Message  
Delivery Options  
From the Messages Settings page, touch Text Message Delivery  
Options.  
It is recommended that you do not alter any fields except the following  
except when directed to do so by a customer service representative.  
Get Delivery Report: When this option is enabled, the network informs  
you whether or not your message has been delivered.  
Keep a Copy: Store a local copy of all outgoing text messages.  
Text Message Centre  
From the Messages Settings page, touch Text Message Text  
Message Centre.  
Touch  
to view the text message centre settings. It is recommended  
that you do not alter any fields except when directed to do so by a customer  
service representative.  
Picture Messages  
1. From the Messages Settings page, touch Picture Messages.  
2. Touch an available field and make the necessary updates.  
Messages  
99  
Delivery Options: to configure the parameters associated with the  
delivery of the multimedia message.  
Priority: Select the priority level of your messages.  
Expiration: Select the length of time you wish the message you  
sent to remain on the message server.  
Delivery Time: You can set a time delay before the phone sends  
your messages.  
Message Size: You can set the maximum allowed size for a  
multimedia message(30/100/300 KB).  
Get Delivery Report: When this option is enabled, the network  
informs you whether or not your message has been delivered.  
Get Read Report: When this option is enabled, your phone  
requests a reply along with your message to the recipient.  
Keep a Copy: Specifies whether you want to keep a copy of the  
sent messages on your phone.  
Add My Business Card: Sends your Business Card information  
with messages.  
Receiving Options: to configure the parameters associated  
received multimedia messages such as:  
Download Type: Lets you set the message receipt options.  
Choose Auto Download, Manual, or Reject.  
Send Delivery Report: when this option is enabled, the phone  
allows the network report to the sender whether or not the message  
has been received.  
Send Read Report: When this option is enabled, your phone  
sends a notification back to the recipient indicating that your  
message has been received.  
Reject Anonymous: Allows you to automatically reject messages  
with a category of anonymous.  
Messages  
100  
Reject Advertisement: Allows you to automatically reject  
messages with a category of advertisement.  
Picture Message Profiles: To configure you Network parameters (it  
is recommended that you consult a customer service representative  
before changing any of these settings).  
Auto Resize Image: To configure the size limits of the images  
added to new picture messages. Images larger than the setting are  
resized to meet this value. Options are: No Resize, 100 KB, 300 KB.  
Creation Mode: Configures editing and formatting tools. Choose  
from: Free, Warning, or Restricted.  
Default Style: assigns the “look and feel” for the multimedia  
message screen: Background Colour, Font Colour (for text), Font  
Style, and Slide Duration (during playback).  
3. Touch Save to store each new settings.  
Voice Mail  
Shows your voice mail number (this number is programmed into your SIM  
and cannot be changed).  
From the Messages Settings page, touch Voice Mail.  
Broadcast Message  
This network service allows you to receive text messages from your service  
provider on various topics.  
Note: Please contact Rogers customer service for further details before changing any of the  
settings.  
Push Message  
A Push Message is a method for your service provider to deliver content  
such as firmware updates and emergency notifications to mobile phones  
Messages  
101  
   
that are WAP enabled. You cannot initiate or reply to WAP Push  
Messages.  
Note: Please contact Rogers customer service for further details before changing any of the  
settings.  
Delete by Folder  
Use this menu to delete folders of messages.  
1. From the Idle screen, touch  
Messages Delete by  
Folder.  
2. Touch the check box next to each folder to be deleted or touch All to  
place a check mark beside all folders, then touch Delete.  
3. If any messages are locked, a message appears asking whether to  
delete them; touch Yes or Cancel as required.  
Memory Status  
The Memory Status menu allows you to view the usage and available  
memory in your phone. It displays the total memory used and available as  
well as the memory usage for each storage folder.  
To access the Memory Status menu:  
1. From the Idle screen, touch  
Messages Memory  
Status.  
2. To view the results for various types of messages, touch the drop-down  
box at the top right corner of the screen and touch an entry.  
Messages  
102  
       
Media  
The Media menu is used to manage your media files (audio, pictures,  
videos and other files).  
Media files are organized in a series of folders. You can also create  
additional folders or sub-folders to further organize your files.  
Create a New Folder  
1. From the Idle screen, touch  
Media Create Folder.  
2. Use the onscreen keypad/keyboard to enter a name for the new folder.  
3. Touch OK.  
Manage Files and Folders  
1. From the Idle screen, touch  
Media Manage.  
2. Touch Move to move files or folders to a new location, Copy to copy  
files or folders in a new location.  
3. Navigate to the location of the files or folders you wish to copy.  
4. Touch the check box next to each file to be moved or copied, or touch  
All to place a check mark beside all items.  
5. Touch Move or Copy.  
6. If your phone contains a memory card, touch Phone or Memory Card  
to select a location.  
7. Navigate to the location where you want to place the folder(s) or file(s)  
and touch Move Here or Paste Here.  
Note: Only unlocked files and folders can be moved or copied. The Audio, Pictures, Videos and  
Other Files folders are permanently locked. Ringtones and wallpapers supplied with your phone  
are permanently locked. Files you have placed on the phone are unlocked unless you have  
Media  
103  
       
File and Folder Options  
The availability of some of these options depends on the selected file.  
1. From the Idle screen, touch  
2. Select an onscreen option:  
Media More.  
Delete: Erases selected files/folders.  
Rename: Renames selected files/folders.  
Sort by: Sorts files and folders by Date, Type, Name, or Size.  
Send via Bluetooth: Sends a file via Bluetooth to another  
compatible device.  
Bluetooth Visibility: Lets you make specific files or folders visible to  
other Bluetooth devices.  
Lock/Unlock: Lets you lock files and folders.  
Audio  
Ringtones  
In this folder you can download ringtones using the Internet browser and  
manage your ringtones.  
Get New Ringtones  
This option allows you to download ringtones from your service provider.  
1. From the Idle screen, touch  
Media Audio   
Ringtones Get New Ringtones. The browser launches and opens  
the Music & Tones page.  
2. Follow the on-screen options to select and download a file.  
For more information on using the browser, see “Internet” on page 76).  
Media  
104  
         
Set Call Ringtone  
Call Ringtone allows you to assign the ringtone that plays whenever a call  
is received and the caller is not assigned a ringtone (see Caller Ringtone  
below).  
1. From the Idle screen, touch  
Media Audio   
Ringtones.  
2. Touch the desired ringtone. The playback screen opens.  
3. Touch Set as.  
4. Touch Call Ringtone.  
Note: Only DRM (Digital Rights Managed) audio files can be used as ringtones.  
Set Caller Ringtone  
Caller Ringtone allows you to assign a ringtone to a specific caller.  
1. From the Idle screen, touch  
Media Audio   
Ringtones.  
2. Touch the desired ringtone. The playback screen opens.  
3. Touch Set as.  
4. Touch Caller Ringtone.  
5. To assign the ringtone to an existing contact, touch Search Contact,  
touch the contact name, then touch Save.  
To assign the ringtone to a new contact, touch Create Contact, enter  
the contact information and touch Save.  
For more information on creating contacts, see“Add New Contact” on  
Note: Only DRM (Digital Rights Managed) audio files can be used as ringtones.  
Media  
105  
Set Alarm Tone  
Alarm Tone allows you to assign the ringtone as an alarm.  
1. From the Idle screen, touch  
Media Audio   
Ringtones.  
2. Touch the desired ringtone. The playback screen opens.  
3. Touch Set as.  
4. Touch Alarm Tone.  
5. Touch Create Alarm, enter the alarm information, and touch Save.  
For more information on setting alarms, see “Alarms” on page 130  
Music  
This folder is used to store music files downloaded to your phone.  
1. From the Idle screen, touch  
Media Audio Music.  
2. To play a music file, touch the file.  
For more information on using the media player, see “Media Player” on  
Recorded Audio  
This folder is used to store audio files that you create with the built in  
recorder.  
1. From the Idle screen, touch  
Media Audio   
Recorded Audio.  
2. To play a recorded audio file, touch the file.  
For more information on using the audio recorder, see “Record Audio” on  
Media  
106  
   
Pictures  
This folder contains your collections of provided and downloaded pictures  
as well as those taken with your phone’s internal camera. You can also  
download pictures.  
Get New Graphics  
The Get New Graphics option allows you to download images from your  
service provider.  
1. From the Idle screen, touch  
Media Pictures Get  
New Graphics. The browser launches and opens the Graphics/  
Themes page.  
2. Follow the on-screen options to select and download a file.  
For more information on using the browser, see “Internet” on page 76.  
View Online Album  
This menu option launches the browser and opens your Online Album web  
space, where you can create and view picture albums stored online.  
1. From the Idle screen, touch  
Media Pictures View  
Online Album. The browser launches and opens your Online Album  
web space.  
2. Follow the on-screen options to create, manage and view online  
albums.  
For more information on using the browser, see “Internet” on page 76.  
Videos  
This folder contains your collection of downloaded videos and those taken  
with your phone’s internal camera.  
Media  
107  
             
Get New Video Clips  
The Get New Video Clips option allows you to download videos from your  
service provider.  
1. From the Idle screen, touch  
Media Videos Get  
New Video Clips. The browser launches and opens the TV/Video  
page.  
2. Follow the on-screen options to select and download a file.  
For more information on using the browser, see “Internet” on page 76.  
View Online Album  
This menu option launches the browser and opens your Online Album web  
space, where you can create and view picture albums stored online.  
1. From the Idle screen, touch  
Media Videos View  
Online Album. The browser launches and opens your Online Album  
web space.  
2. Follow the on-screen options to create, manage and view online  
albums.  
For more information on using the browser, see “Internet” on page 76.  
Other Files  
This folder provides a location where you can store other types of files on  
your phone, such as spreadsheets, text files and presentations. You can  
send these files to others via Bluetooth. For information on transferring files  
to and from your phone, see “Transferring Files” on page 54.  
From the Idle screen, touch  
Media Other Files.  
Media  
108  
         
Memory Status  
The Memory Status menu allows you to view the memory usage and  
available space in your phone and space used and available on a memory  
card (if present). It displays the total space available as well as the usage  
for each storage folder.  
1. From the Idle screen, touch  
Media Memory Status.  
The results for your phone are shown.  
2. To view the results for an inserted memory card, touch the drop-down  
box at the top right corner of the screen and touch On Card.  
3. Press  
to return to the previous screen.  
Media  
109  
   
Games & Apps  
Using the Games & Apps menu you can play games already stored on your  
phone, as well as download games and other applications from your  
service provider.  
Games  
Get New Games  
This selection allows you to download games from your service provider.  
1. From the Idle screen, touch  
Games & Apps  
Get New  
Games. The browser launches and opens the Games page.  
2. Follow the on-screen options to select and download a file.  
For more information on using the browser, see “Internet” on page 76.  
Play a Game  
To play a game:  
1. From the Idle screen, touch  
Games & Apps.  
2. Touch the game you want to play.  
3. The game’s welcome screen displays information about the game.  
Follow the on-screen instructions to play the game.  
Get New Applications  
This selection allows you to download applications from your service  
provider.  
1. From the Idle screen, touch  
Games & Apps  
Get New  
Applications. The browser launches and opens the Apps page.  
2. Follow the on-screen options to select and download a file.  
Games & Apps  
110  
       
Downloaded applications are added to the Games & Apps menu.  
Press <Options> to access browser options (see “Internet” on page 76).  
Tools  
Communities  
This menu option provides a list of online communities.  
1. From the Idle screen, touch  
Games & Apps  
Tools  
Communities.  
Communities Settings  
Upload details: Displays details of community uploads.  
Preferred lists: Lets you choose the online communities you wish to  
access. The available choices are Facebook, Picasa, Flickr, Photobucket,  
Friendster and MySpace. Touch Add Lists, touch the check box next to  
the communities as required to add a check mark (selected) or remove the  
check mark (not selected). Touch Save to save the settings.  
Image resize: Controls how images are resized before uploading (Small,  
Medium, or Original).  
Upload reservation: Lets you set the upload Destination, use the Upload  
editor to select files and set the Title and Album, and set the Upload time  
and Upload date.  
Account manager: Lets you save ID & Password and Logout information.  
Disclaimer: Displays a legal disclaimer regarding use of services and  
content provided online by third parties.  
Games & Apps  
111  
     
Camera  
This section explains how to use the 2.0 megapixel camera built in to your  
phone. You can take photographs in JPEG format and shoot videos.  
Using the Camera  
Taking pictures with your device’s built-in camera is as simple as choosing  
a subject, pointing the camera, then pressing the camera key.  
1. In Idle mode, press the Camera key  
to activate the camera.  
to switch to camera  
2. If the camera is in camcorder mode, press  
mode.  
3. Using the phone’s main display screen as a viewfinder, adjust the  
image by aiming the camera at the subject. Onscreen icons let you  
access various camera options (see “Camera and Camcorder Options”  
4. Press the Camera key until the shutter sounds. The picture is displayed  
on the screen (if Instant Review is turned on) and automatically stored  
in the designated storage location (see “Camera and Camcorder  
While viewing a picture, you can use the Volume keys to zoom in up to  
10x and zoom out.  
Note: The number of pictures remaining on the selected media appears in the upper-right of the  
screen. This is an approximate number of total pictures that can be taken at the current image  
size.  
5. Press  
to return to the viewfinder.  
Camera and Camcorder Options  
Options are represented by icons along both sides of the screen.  
Games & Apps  
112  
   
Note: The options disappear after a few seconds. Touch the screen and they will reappear.  
Camera/Camcorder Mode: Switches operation between Camera and  
Camcorder mode. Once you change the mode, the corresponding  
indicator appears at the top left of the display.  
Recording Mode: allows you to set the recording mode to either: Normal  
(limited only by available space on destination location), Limit for Picture  
Message (limited by MMS size restrictions).  
Shooting mode: Allows you to set the shooting mode. Options are:  
S
Single: Takes a single photo.  
Continuous: Takes a series of photos when the Camera key is held  
down.  
Panorama: Takes a landscape photo by taking an initial photo and  
then adding additional images to it. The guide box lets you view the  
area where the second part of the panoramic picture should fall.  
Smile Shot: The camera focuses on the face of your subject. When  
the camera detects the person’s smile, it takes the picture.  
Mosaic: Takes multiple photos and then groups them together into a  
single image.  
Frame: Allows you to choose one of 20 custom frame borders for  
your image. Touch OK to assign the frame.  
Camera Resolution: Allows you to set the image size to 2M(1600x1200),  
w1M(1600x960), 1M(1280x960), 0.3M(640x480), 400x240 or 320x240  
pixels.  
Camcorder Resolution: allows you to set the video size to 320x240 or  
176x144 pixels.  
Games & Apps  
113  
Settings: Allows you to customize your camera settings. Choose the  
following options and touch OK:  
Camera  
:
Effects: Change the color tone or apply special effects to the photo.  
Options include: None, Black and White, Sepia, Negative, or Water  
Color.  
Exposure Meter: Set how the camera measures or meters the light  
source: Matrix, Centre-Weighted, or Spot.  
Night Mode: Sets the Night Mode to On or Off.  
Image Quality: Sets the image quality to Superfine, Fine, Normal, or  
Economy.  
Camcorder  
:
Effects: Lets you change the color tone or apply special effects to the  
video. Options include: None, Black and White, Sepia, Negative, or  
Water Color.  
Video Quality: Sets the video quality to: Fine, Normal, or Economy.  
Settings tab  
:
Guidelines: Turns the guidelines On or Off.  
Review: Lets you activate the instant review feature where images  
are displayed immediately after review (On or Off).  
Shutter Sound: Selects a tone to play when the camera’s shutter  
operates. Sound selections are Shutter 1, Shutter 2, Shutter 3, or  
Off.  
Audio Recording: Chooses whether to record audio while recording  
video. Selecting Off records video only.  
Storage: allows you to configure the default storage location for  
images and videos as either Phone or Memory Card (if inserted).  
White Balance: allows you to set this option from the following choices:  
Auto, Daylight, Incandescent, Fluorescent, or Cloudy.  
Timer: allows you to set a time delay before the camera takes the photo  
or the camcorder begins recording video. Options include: Off, 2  
seconds, 5 seconds, or 10 seconds.  
Games & Apps  
114  
     
Brightness: allows you to adjust the brightness level by moving the slider  
across the page.  
Access Pictures/Video Folder Options: allows you to access the options  
page for a selected image/video. Options include: Play slideshow, Edit,  
Upload to web (facebook, Picasa, Flickr, Photobucket, Friendster,  
MySpace), Information, Send (via Message or to Online Album), Set as  
(Wallpaper or Caller ID), Delete, and Return to previous page.  
Pictures Folder Options  
After you have taken a picture, you can access various options.  
Touch and then touch one of the available options:  
  
Play Slideshow: Plays the available images (from the Pictures  
folder) as a slideshow. Touch the Up/Down arrows to set the duration  
of each onscreen image.  
Edit: allows you to edit the current image using any of the following:  
Effects: Allows you to choose from several effects.  
Adjust: Adjusts Auto Level, Brightness, Contrast, and Colour.  
Transform: Allows you to Resize, Rotate, and Flip the image.  
Crop: Lets you crop the image. Touch one corner of the image  
and, in a single motion, drag to another location to create the  
crop area, then touch Crop.  
Insert: Lets you add Frames, Image, Clip Arts, Emoticon, and  
Text to the image.  
Memo on screen: Lets you select a color, then handwrite a  
message onto the current image. Touch Done to store the  
changes.  
Upload to Web: Lets you upload the image to Facebook, Picasa,  
Flickr, Photobucket, Friendster or MySpace. Touch the icon for the  
upload site required, enter information in the text fields as required  
(Title, Notes, Blog tag) then touch Upload.  
Games & Apps  
115  
Information: Displays file information such as name, format, size,  
resolution, etc.  
Send: Lets you send the active image as part of a multimedia  
message or to an Online Album.  
Set as: Lets you assign the current image as your Wallpaper or as  
the display image for a contact entry.  
Delete: Erases the currently selected image/video.  
Return: Takes you back to the previously active camera or  
camcorder page where you can take another photo or shoot a new  
video.  
Note: Edit and Set features are not available when the camcorder mode is active.  
Image Viewer  
1. From the Idle screen, touch  
Media Pictures  
2. Touch a photo to open it in the viewer.  
On the image viewer page, you have access to both macro functions  
(Zoom, Edit, and Info) and menu options.  
Note: Menu options only appear in portrait view.  
Zoom: Magnifies the current image.  
Edit: Allows you to edit the current image by applying various image  
effects.  
Information: Displays an onscreen listing of the image’s properties such  
as: name, format, size, etc.  
Games & Apps  
116  
 
Send: Lets you send the currently active image via Message, via  
Exchange ActiveSync, via Bluetooth, or to Online Album.  
Set as: Lets you assign the image as your Wallpaper or as the display  
image for a contact entry.  
More: Lets you to choose from the following image options:  
Delete: Lets you to delete the current graphic.  
Rename: Lets you to rename the current graphic.  
Slide Show: Lets you play a slideshow using the pictures currently  
available from within the Pictures page. Touch the screen to access  
slideshow controls (Start/Stop, Forward, Back). Press  
to stop the slideshow.  
or  
Bluetooth Visibility: Toggles Bluetooth visibility status between  
Visible or Hidden.  
Print via: Lets you print the selected graphic using USB or Bluetooth  
printer.  
Lock/Unlock: allows you to prevent alterations and deletion of the  
selected graphic.  
Properties: Displays the properties of a file.  
Edit a Photo  
1. From the Idle screen, touch  
<image name>  
2. Touch  
Media Pictures   
Edit and select from any of the following:  
Effects: Allows you to choose from several effects.  
Adjust: Adjusts Auto Level, Brightness, Contrast, and Colour.  
Transform: Allows you to Resize, Rotate, and Flip the image.  
Crop: Lets you crop the image. Touch one corner of the image and,  
in a single motion, drag to another location to create the crop area,  
then touch Crop.  
Games & Apps  
117  
   
Insert: Lets you add Frames, Image, Clip arts, Emoticon, and Text to  
the image.  
Memo on screen: Lets you select a color, then handwrite a  
message onto the current image. Touch Done to store the changes.  
Assign an Image to a Contact  
1. From the Idle screen, touch  
Media Pictures   
<image name>  
2. Touch Set as Caller Image Search Contact.  
3. Touch a contact entry.  
4. Touch Save.  
For more information on using Contacts, see “Contacts” on page 59.  
Assign an Image as a Wallpaper  
1. From the Idle screen, touch  
Media Pictures   
<image name>  
2. Touch Set as Wallpaper.  
3. Touch the screen to reveal the adjustment tools:  
Zoom slider: touch the magnifying icons at either the top or bottom of  
the slider to adjust the magnification of the current image.  
Rotate: orients the current image in either a landscape or portrait  
orientation. The bottom left of the page indicates how much of the  
image will be displayed as the wallpaper.  
4. Touch Set to store the new settings and assign the wallpaper image.  
Using the Camcorder  
1. In Idle mode, press the Camera key  
mode.  
to activate the camera  
Games & Apps  
118  
 
2. If the camera is in camera mode, press  
mode.  
to switch to camcorder  
3. Using the phone’s main display screen as a viewfinder, adjust the  
image by aiming the camera at the subject. Onscreen icons let you  
access various camera options (see “Camera and Camcorder Options”  
4. Press the Camera key again to begin shooting video.  
5. Touch  
or the Camera key to stop the recording and save the  
video file to your Videos folder.  
6. Once the file has been saved, touch  
review.  
to play back your video for  
Press  
to return to the viewfinder.  
Camcorder Options  
Camcorder options are represented by icons along both sides of the  
screen. For a complete description, see “Camera and Camcorder Options”  
Video Options  
After you have recorded a video, you can use various options that appear  
as icons on the screen. Touch an icon to activate the function.  
Upload to Web: Lets you upload video to Photobucket. Touch the  
icon for the upload site, enter information in the Album field as  
required, then touch Upload.  
Information: Displays file information such as name, format, size,  
resolution, etc.  
Send: Lets you send the active video as part of a multimedia  
message or to Online Album.  
Games & Apps  
119  
Delete: Erases the currently selected video.  
Return: Takes you back to the previously active camera or  
camcorder page where you can take another photo or shoot a new  
video.  
Voice Recognition  
Nuance Voice Recognition software is an advanced speech recognition  
program that can be used to activate a wide variety of functions on your  
phone. Nuance software automatically voice activates up to 2,000 contacts  
for voice dialing and searching. No pre-recording or training is required.  
Speak a contact name to dial, and use your voice to look up contacts,  
launch applications and navigate phone menus.  
1. From the Idle screen, touch  
Games & Apps Tools   
Voice Recognition.  
2. After the voice prompt “Say a Command”, speak a command. A list of  
available commands is provided below.  
Note: This list of voice commands is briefly displayed.  
Voice Commands  
Call <Name or #>: Dials the spoken number or the number associated  
with the spoken name in your contact list. If multiple numbers exist (i.e.,  
home, work, cell phone), say the name and the number type.  
Send Message to <Name or #>: displays the Create Text Message  
screen.  
Lookup <Name>: Locates and displays contact information for the  
name stored in the Contacts list.  
Games & Apps  
120  
 
Go to <Application>: Opens the phone application (Voice mail,  
Contacts, Tones, Calendar, Tasks, and Browser). Application must be  
activated.  
Check <Item>: Reports various phone status (Status, Messages,  
Missed Calls, Time, Signal strength, Network, Battery, My Phone  
Number, and Volume).  
When the Say a Command screen displays, there are two options  
available:  
Tutorial: Provides examples of how to use the voice commands.  
Settings: Lists the settings and information for voice command  
software:  
Confirmation: Sets whether the system asks for confirmation of what  
is said (Automatic, Always Confirm, Never Confirm)  
Adaptation: Trains the software to respond to your voice  
Mode: Sets the level of audio guidance to Prompt Mode (audio  
prompt), Readout Mode (audio prompt and screen message), Expert  
Mode (beep only)  
Speakerphone: Automatic (uses phone setting), Always On, Always  
Off  
About: Displays the software version.  
If the phone does not recognize a command, it issues the voice prompt  
“Sorry, Command not recognized. Try Again?” Say Yes to try again, No to  
access options screen that provides two choices:  
Tutorial: provides instructions on how to use voice commands.  
Restart: Returns to the Say a Command screen.  
Voice Recognition Tips  
Speak clearly when giving a command. There is no need to speak slowly  
or with added emphasis. The voice recognition software has been  
optimized to understand speech in its natural form. If it does not  
recognize your command after a few seconds, a voice prompt asks you  
Games & Apps  
121  
to repeat the command. If it does not recognize your command again, it  
issues the voice message “Sorry, command not recognized,” and voice  
recognition turns off.  
You must end your current Voice Commands call before you can make  
another call using Voice Commands. To make a three-way call, only the  
first call can be made using Voice Commands.  
Wait for the tone before you speak.  
In very noise environments, it may be helpful to use a headset or a  
Bluetooth headset.  
Contacts List Voice Activation  
On startup, Nuance Voice Recognition software reads your Contacts list  
and voice-activates all the names.  
When you add or change contacts, the software automatically reloads and  
voice-activates the list.  
Media Player  
The Media Player lets you navigate through your music library, play songs,  
and create playlists. The music player supports files with extensions AAC,  
AAC+, eAAC+, MP3, WMA, 3GP, MP4, and M4A.  
Note: The following characters cannot be used in a playlist filename: < > “ ? / \ : * |.  
Using the Media Player  
1. From the Idle screen, touch  
Games & Apps Tools   
Media Player.  
2. Touch a library category (All Music, Artist, Album, or Playlist) to view  
the available music files.  
3. Scroll through the list of songs and touch an entry to begin playback.  
Games & Apps  
122  
 
Media Player Functions  
Touch any of the following onscreen buttons during playback to activate  
their functions:  
Shuffle mode  
Shuffle On: the current list of songs are randomly shuffled for  
playback.  
Shuffle Off: songs play in order and are not shuffled.  
Equalizer  
NORM  
NORM (normal)  
•ROCK  
•POP  
DANC (dance)  
CLAS (classical)  
•JAZZ  
•WIDE  
DYNA (dynamic)  
5.1Ch.  
The a886 uses the SRS™ solution: WIDE = WOWHD (Voice),  
DYNAMIC = WOWHD.  
Repeat  
Repeat one: repeats the currently playing song.  
Repeat all: replays the current list when the list ends.  
Play All: plays the current song list once.  
Back  
Touch quickly to move to the beginning of the current song.  
Touch and hold to play the previous song.  
Play  
Touch once to play the current song.  
Pause  
Touch once to pause the current song.  
Games & Apps  
123  
Forward  
Advances to the next song.  
Touch the player menu options at the bottom of the screen for additional  
menu functions:  
Library: displays the Media Player library (Now Playing, All Music, Artist,  
Album, Playlists).  
Minimize: reduces the player and leaves it running in the background so  
that you can navigate to other programs or activities.  
More: provides additional selections  
Add to Playlist: Lets you to add the current audio file to a playlist.  
Send via: allows you to send the current file as a message  
attachment, via Exchange ActiveSync, or as a data file delivered to a  
Bluetooth-capable device.  
Settings: Accesses the Background Playing Settings menu.  
Properties: allows you to view details for the current song such as  
Name, Format, Size, Forwarding, Date created, Location, Artist,  
Title, Album, Track length, Genre, Recording date, Track number,  
and Format. Depending on the file, some details may not be  
available.  
Adding Music to your Handset  
Music files (ringtones and full tracks) can be added to your handset using  
one or more of the following methods:  
Purchase and download music and ringtones directly to your handset  
over your wireless carrier’s network.  
Transfer music files from a personal computer using a media player  
TM  
application, a USB Data Cable (optional) and a microSD memory  
card.  
Games & Apps  
124  
Note: Audio files smaller than 300 KB are treated as ringtones while audio files larger than 300  
KB are stored in the Music folder. To listen to music files smaller than 300 KB, go to Menu  
Media Audio Ringtones.  
Note: When the Bluetooth feature is active on your handset, USB communication is not  
available.To transfer files to your handset, turn off Bluetooth communication (see “Bluetooth” on  
Note: The maximum number of songs you can synchronize between your phone and a PC is  
1500.  
Playing Music through a Stereo Bluetooth Device  
Your phone supports the Stereo Bluetooth profile (A2DP), and when  
connected to a stereo Bluetooth headset it will play music in stereo through  
the headset.  
1. Pair and connect your handset to the stereo Bluetooth headset (see  
2. From your phone’s list of compatible devices, select the previously  
paired Bluetooth headset to begin listening to your song through the  
headset.  
Now when you operate the Media Player, the music is played through the  
headset.  
Playing Music while Using the Phone  
The Media Player allows you to play music in the background while  
performing other tasks on your phone as long as Background Playing is set  
to On.  
1. From the Idle screen, touch  
Games & Apps Tools   
Media Player Settings.  
2. Under Background Playing, touch On.  
Games & Apps  
125  
The functions you can use are:  
Call: Music pauses when an incoming call is accepted, and resumes when  
the call is ended.  
Messaging: Music continues to play while you send or receive an instant  
message, text message, or multimedia message, unless an audio clip is  
received as a part of a multimedia message.  
Music Player: You can turn on the Media Player and use the full-screen  
controls.  
Games: You can play games while listening to music.  
Note: When you are finished using the Music Player, press the End key to stop the player and  
prevent the battery from discharging. Pausing the player continues to draw power from the  
battery.  
Using Playlists  
Playlists let you group songs in lists and play back all songs on the list by  
simply selecting the playlist. Playlists can be created from the Media  
Player’s options menu or within a third party music application (such as  
Windows Media Player) and downloaded to the handset.  
To create a playlist:  
1. From the Idle screen, touch  
Games & Apps Tools   
Media Player Playlists Create.  
2. Touch the playlist name field and use the onscreen keypad/keyboard to  
enter a descriptive name for the playlist (by default the name field  
generates a numbered list of playlists).  
3. Touch OK to close the keypad/keyboard.  
4. Touch Save.  
To add songs to a playlist:  
Games & Apps  
126  
 
1. From the Idle screen, touch  
Games & Apps Tools   
Media Player Playlists.  
2. Touch the playlist name and touch Add.  
3. Touch All Music to view all music files on your phone, Artist to list files  
by artist name, Album to list files by album name.  
4. Touch the check box next to each music file to be added to the list, or  
touch Select All to place a check mark beside all items.  
5. Touch Add to add the songs to the current playlist.  
To change the order of songs in a Playlist:  
1. From the Idle screen, touch  
Games & Apps Tools   
Media Player Playlists.  
2. Touch a playlist.  
3. Touch More Change Order.  
4. Use your fingertip to drag and drop songs to new locations as required.  
To remove songs from a Playlist:  
1. From the Idle screen, touch  
Games & Apps Tools   
Media Player Playlists.  
2. Touch the playlist.  
3. Touch Remove.  
4. Touch the check box next to each music file to be removed from the  
list, or touch Select all to place a check mark beside all items.  
5. Touch Remove to delete the songs from the playlist.  
To transfer music using a media application:  
This procedure allows you to synchronize music files between a memory  
card in your phone and Windows Media Player on a PC using Microsoft  
MTP (Media Transfer Protocol), which transfers media files and associated  
metadata to/from devices with optional additional support for remote  
Games & Apps  
127  
control of the device, reading and setting of device parameters such as  
special DRM-related device parameters for restricted content.  
Note: Your phone’s USB Setting must be set to Media Player or Ask on Connection to use this  
1. Connect the USB cable to a USB port on your PC and to your phone.  
USB Mode set to Ask on Connection: When the Select USB Mode  
window appears on the phone, touch Media Player. When  
connection has been established, the USB connection icon  
appears in the indicators area of the phone and “Connected”  
appears on the phone display.  
USB Mode set to Media Player: When connection has been  
established, the USB connection icon  
appears in the  
indicators area of the phone and “Connected” appears on the phone  
display.  
2. Open Windows Media Player on the PC and click the Sync tab. The  
list of devices at the right side of the screen will include your phone  
(SGH-A886) and the available storage space. A list of available songs  
appears in the main area of the screen.  
3. Drag and drop the files you want to transfer to your phone to the Sync  
List at the right side of the screen.  
4. Click the Start Sync button to download the selected music to your  
memory card. “Synchronizing” displays in Windows Media Player while  
file transfer is in progress.  
Note: Do not unplug the USB connector from the phone or PC while files are being transferred  
as this can corrupt the files.  
5. When file transfer is complete, unplug the USB connector from the  
phone.  
Import a Playlist from Windows Media Player:  
Games & Apps  
128  
1. Connect your phone to the PC and open Windows Media Player (see  
above).  
2. Click the Sync tab and locate Playlists (upper left side of the screen).  
3. Right-click a playlist and select Add to ‘Sync List’.  
4. Click Start Sync to upload the selected playlist to your phone.  
5. When file transfer is complete, unplug the USB connector from the  
phone.  
Record Audio  
Record Audio lets you to record voice memos and send your audio clip to  
other people as an attachment to an MMS message. Recording time varies  
with the available memory within the phone.  
1. From the Idle screen, touch  
Games & Apps Tools   
. Record a memo by speaking into the  
) to temporarily halt recording, Stop ( ) to stop  
Record Audio.  
2. To start recording, touch  
microphone.  
3. Press Pause (  
recording and save the file  
When recording has stopped, the following options are available:  
Play: Plays back the memo.  
Record: Saves the current memo and begin another session.  
Delete: Lets you delete the current memo.  
More: provides additional functions.  
Send via: Lets you send the memo via Message, Exchange  
ActiveSync or Bluetooth.  
Set as: Lets you set the current memo as a Call Ringtone, a Caller  
Ringtone or an Alarm Tone.  
Properties: displays the properties of the current voice memo (Name,  
Format, Size, etc.).  
Games & Apps  
129  
 
Recorded Audio Folder  
This folder contains all audio clips that have been recorded and saved. To  
access this folder, use the following steps:  
1. From the idle screen, touch  
MediaAudio   
Recorded Audio.  
2. Touch the memo you wish to play to begin playback.  
3. To exit, press  
or  
.
Record Audio Settings  
1. From the idle screen, touch  
Games & AppsTools   
Record Audio Settings.  
2. Touch either of the following fields and edit the information:  
Default Name: Use the onscreen keypad/keyboard to enter the  
name prefix for all recorded audio files (the default is “Voice”). Touch  
OK to store the new name.  
Recording Time: Touch the maximum time allowed for a recorded  
audio file (1 Minute, 5 Minutes, 10 Minutes, 15 Minutes, 30 Minutes,  
60 Minutes, or Limit for MMS).  
3. Touch Save.  
Alarms  
This feature allows you to set alarms to ring at a specific time.  
1. From the idle screen, touch  
Games & AppsTools   
Alarms. The following options display:  
Alarm Name: Lets you specify a name to appear on the display  
when the alarm activates.  
Alarm Time: Lets you set the alarm time using the keypad or the  
Jog screen. To use the keypad, touch Hour and enter the number,  
touch Minute and enter the number, touch AM or PM, and touch Set.  
Games & Apps  
130  
   
Note: To change the time format, see “Time and Date” on page 150.  
Alarm Repeat: Use this option to choose the days that the alarm  
sounds.Touch the check box next to each day that the alarm should  
sound or Everyday to place a check mark beside every day, then  
touch Save.  
Snooze/Snooze Duration/Snooze Repeat: Lets you turn snooze  
on or off and set the wait time (5, 10, 15, 20, or 30 Minutes) and  
number of repeats (1, 2, 3, 5, or 10 Times).  
Set Details: Lets you modify some additional features:  
Alarm Type: Sets the way in which the alarm alerts you when  
activated (Melody, Vibration, Vibration then Melody, Vibration and  
Melody).  
Alarm Tone: sets the sound file played when the alarm is activated.  
Alarm Volume: Adjusts the alarm’s volume (level 1 - 7).  
2. Touch Save to store the alarm details and Save again store this new  
event.  
3. To keep the alarm event active when the phone is turned off, Touch On  
in the Auto Power-up field.  
Turning Off an Alarm  
To stop an alarm when it rings, do any of the following:  
Press any key  
Slide the Stop slider to the right until the alarms stops  
If Motion Detection is turned on and the phone is facing upwards, flip it  
over so that it is facing down; if the phone is facing downwards, flip it  
over so it is facing upward and then flip it over again so that it is facing  
downward. To set up your phone to utilize Motion Detection, see “Motion  
Games & Apps  
131  
 
If Snooze is set to On and if the phone is facing upwards, flip it over so  
that it is facing down to activate Snooze. If the phone is facing  
downward, flip it over so it is facing upward and then flip it over again so  
that it is facing downward. Each time the alarm rings (depending on how  
many times you have set the Snooze Repeat option) flip the phone over.  
Calendar  
Using the Calendar feature, you can view any month, week or day. The  
current day is highlighted in the month and week views. You can also  
create Event reminders for any day.  
To view the Calendar, touch  
Calendar. The calendar opens in Month, Week or Day view, depending on  
Games & AppsTools   
In Month view, the current date is highlighted by a box around the number.  
Events are indicated by a blue arrow at the lower right corner of the date.  
Touch the arrows at the edges of the title bar to move to the previous or  
following month. To view the events on a specific day, touch the day twice  
to open Day view.  
Week view provides a grid with the days of the week across and daytime  
hours arranged vertically. Use your fingertip to scroll the screen vertically to  
view additional times. Blue colored squares indicate the time slots where  
events are scheduled. Touch the arrows at the edges of the title bar to  
move to the previous or following week. To view the events on a specific  
day, touch the day twice to open Day view.  
Day view provides a list of the events associated with the chosen day and  
the scheduled time for each.  
Change the Calendar View  
To change Calendar views, touch More and touch the desired view (View  
by Day, View by Week or View by Month).  
Games & Apps  
132  
 
Create a New Event  
1. From the idle screen, touch  
Games & Apps Tools   
Calendar Create Event.  
2. Touch the Title field and use the onscreen keypad/keyboard to enter a  
name for this specific event. Touch OK to save the new name.  
3. Touch the Start Date field. Touch the Keypad tab and enter a date  
using the keypad, or touch the Jog tab and scroll to the desired Month,  
Day and Year using the + and - buttons. Touch Set to complete the  
process.  
4. Touch the Start Time field. Touch the Keypad tab and enter a time by  
touching the Hour and Minute fields and entering the required setting  
using the keypad or touch the Jog tab and scroll to the desired Hour  
and Minute using the + and - buttons. Touch AM or PM. Touch Set to  
complete the process.  
Note: In Jog mode, touching and holding the + or - key increases the speed at which the  
numbers scroll through each reel.  
5. Touch the Alarm field and select a time for the alarm to begin alerting  
you of the upcoming event. The choices are: Off, On Time, 30 Min  
Before, 1 Hour Before, 1 Day Before, 1 Week Before, Customize (your  
own defined schedule). Touch Save to store the new alert time.  
6. Touch Set Details to configure additional parameters for the new  
event:  
End Date: Enter ending date for this event. This is useful if the alarm  
is for a repeating event. Touch Set to store the date.  
End Time: Enter final time for this repeating event. Touch Set to  
store the time.  
Details: Enter a description for this event. Touch OK to store the  
name.  
Games & Apps  
133  
Location: Enter a location for this event. Touch OK to store the  
name.  
Alarm Tone: Choose an alarm tone. Touch an audio file then touch  
Add to assign the file as the alert tone.  
Repeat: allows you to set the number of repetitions for this  
appointment (Off, Every Day, Every Week, Every Month, or Every  
Year). Once selected, all remaining alarm settings are enabled.  
Touch Save to store the option.  
Repeat Until: Sets an expiry date for event alarms.  
Touch Save to store the new event.  
Calendar Options  
On the calendar screen, touch More to access the following options:  
Go to: Lets you select a target date for review. Touch the Keypad tab  
and enter a date using the keypad, or touch the Jog tab and scroll to the  
desired Month, Day and Year using the + and - buttons. Touch Go to  
complete the process.  
View by Day: Lets you change the Calendar view to display a daily  
event listing.  
View by Week: Lets you to change the Calendar view to display a  
weekly calendar.  
View by Month: Lets you to change the Calendar view to display a  
monthly calendar.  
Delete: Lets you remove an event.  
Calendar Settings: Selects the Starting Day (Sunday or Monday) and  
View by (select Month, Week, or Day).  
Missed Alarm Events: Displays any missed events.  
Memory Status: Displays a list of the different Calendar event  
categories along with the memory allocation for each.  
Games & Apps  
134  
 
View a Calendar Event  
1. From the idle screen, touch  
Games & Apps Tools   
Calendar Event List. A listing of all upcoming events opens.  
2. To see the details of an event, touch the event listing.  
3. To exit, press  
or  
.
Delete a Calendar Event  
1. From the idle screen, touch  
Games & Apps Tools   
Calendar Event List Delete.  
2. Touch the check box next to each event to be deleted or touch Select  
all to place a check mark beside every event.  
3. Touch Delete.  
Note: Your phone holds up to 300 calendar events.  
Calendar Settings  
1. From the idle screen, touch  
Games & Apps Tools   
Calendar More Calendar Settings.  
2. Touch either of the following fields and touch a selection:  
Starting Day: Choose the first day in the calendar week (Sunday or  
Monday.  
View by: Choose the default view (Month, Week, or Day).  
3. Touch Save.  
Tasks  
The Task function lets you create a list of tasks to be completed or “to-do  
list”. When a task has been completed, you can check it off as done.  
Games & Apps  
135  
   
Enter New Tasks  
1. From the idle screen, touch  
Games & Apps Tools   
Tasks Create Task.  
Select any of the following options:  
2. Touch the Title field and use the onscreen keypad/keyboard to enter a  
name for this specific event (up to 15 characters). Touch OK to save  
the new name.  
3. Touch the Priority field and assign the task a priority (High, Medium, or  
Low).  
4. Touch the Start Date field. Touch the Keypad tab and enter a date  
using the keypad, or touch the Jog tab and scroll to the desired Month,  
Day and Year using the + and - buttons. Touch Set to complete the  
process.  
5. Touch the Due Date field. Touch the Keypad tab and enter a date  
using the keypad, or touch the Jog tab and scroll to the desired Month,  
Day and Year using the + and - buttons. Touch Set to complete the  
process.  
6. Touch the Status field and assign a current project status (Completed  
or Ongoing).  
7. Touch Set Details to configure additional parameters for the new task:  
Details: Enter a detailed description for this task (up to 100  
characters).  
Alarm: allows you to set a time prior to the event when event alerts  
begin (Off, On Start Date, On Due Date, 1 Day Before Starting, 2  
Days Before Starting, or 1 Week Before Starting).  
Alarm Time: Enter a time for this alarm to sound. Touch Set to  
assign the new time.  
Alarm Tone: Lets you choose an alarm tone. Touch a file, then  
touch Add to assign the audio file as the current alarm tone.  
Games & Apps  
136  
8. Touch Save to store the new task.  
Note: Your phone holds up to 100 tasks.  
Memo  
This option allows you to create and save short text files that can be viewed  
later.  
Create a Memo  
1. From the idle screen, touch  
Games & Apps Tools   
Memo Create Memo.  
2. Use the onscreen keypad/keyboard to enter memo text.  
3. Press OK to save the memo.  
Note: Your phone holds up to 100 memos.  
View or Edit a Memo  
1. From the idle screen, touch  
Games & Apps Tools   
Memo.  
2. Touch the memo you wish to view.  
3. To edit the memo, touch Edit and use the onscreen keypad/keyboard  
to alter the memo as required. Touch OK to return to the Memo list.  
Delete a Memo  
1. From the idle screen, touch  
Games & Apps Tools   
Memo Delete.  
2. Touch the check box next to each memo to be deleted or touch Select  
all to place a check mark beside every event.  
3. Touch Delete.  
Games & Apps  
137  
 
Calculator  
With this feature, you can use the phone as a calculator with basic  
arithmetic operators (addition, subtraction, multiplication, division) and  
other mathematical functions. To use the calculator:  
1. From the idle screen, touch  
Games & Apps Tools   
Calculator.  
2. Enter the equation you want to solve.  
Enter numbers by touching the numeric keys.  
Enter arithmetic operators (+, -, × or ÷), decimal point (.) and  
brackets by touching the onscreen keys.  
To enter mathematical functions, touch func and touch the key for  
the required function. Touch 123 to return to the previous screen.  
To clear the last entry, touch  
. To clear all entries, touch C.  
To store a number for later retrieval, touch MS (Memory Store). To  
retrieve the number, touch MR (Memory Retrieval). To clear the  
memory, touch MC (Memory Clear).  
3. To view the result, touch =.  
Tip Calculator  
The tip calculator helps you calculate the tip on a meal or service and split  
the bill between the number of people paying. To use the calculator:  
1. From the idle screen, touch  
Games & Apps Tools   
Tip Calculator.  
2. Touch the Bill field and use the keypad to enter the total amount of the  
bill.  
3. If you want a percentage other than the default 15%, touch Tip and  
enter the new value.  
4. If more than one person is paying, choose Split and enter the number.  
Games & Apps  
138  
   
5. The amount of the Tip, the Total bill, and the amount each person  
should pay appear in the lower half of the screen.  
Converter  
The built-in conversion application performs many unit conversions.  
1.  
Games & Apps Tools Converter.  
2. Touch the desired conversion type (Currency, Length, Weight,  
Volume, Area or Temperature).  
3. Touch the amount field and use the onscreen keypad to enter the  
amount.  
4. Touch the Unit field and enter the type of unit to be converted (the  
value you are converting “from”).  
The resulting converted values (converted “to”) are automatically  
displayed in a list.  
5. Touch Reset to erase the current values and begin again.  
World Clock  
World Clock allows you to view the time of day in other parts of the world. It  
displays the time in 100 cities in all 24 time zones around the world.  
Create a World Clock Listing  
1. From the idle screen, touch  
Games & Apps Tools   
World Clock. If you have already created one or more listings and a  
list of cities appears, touch Add.  
2. Using your fingertip, touch the onscreen map and drag until the desired  
region is visible.  
3. Touch a representative city in the desired area. The entire time zone is  
highlighted in dark gray and the current time within that time zone  
displays.  
Games & Apps  
139  
 
4. To add or remove Daylight Savings Time, touch the sun symbol next to  
the time. The sun symbol turns orange when Daylight Savings Time is  
selected, gray if Daylight Savings Time is off.  
5. Touch OK to save this entry to the City Time list.  
View World Clock Entries  
If you have saved one or more time entries for various cities, when you  
open World Clock the screen displays a list of the cities and the current  
time in each.  
From the idle screen, touch  
World Clock.  
Games & Apps Tools   
Delete a World Clock Entry  
1. From the idle screen, touch  
Games & Apps Tools   
World Clock.  
2. Touch Delete.  
3. Touch the trash can icon (  
) next to the entry to be deleted.  
Timer  
The Timer counts down from a preset time to zero. An alarm plays when  
the time reaches zero.  
1. From the idle screen, touch  
Games & Apps Tools   
Timer.  
2. Touch the Keypad tab to enter a time length using the keypad, or the  
Jog tab to scroll to the desired time.  
3. In Keypad mode, touch Hour, Minute or Second as required and enter  
a setting using the keypad.  
In Jog mode, set the timer by touching the + and - buttons or by sliding  
your fingertip over the numbers.  
Games & Apps  
140  
 
4. Touch Start to start the timer. Touch  
Touch Stop to pause the timer and Restart to start counting again.  
Touch Reset to enter a new time setting.  
Note: If Motion Detection is turned on, you can also stop the timer by flipping the phone over so  
that it is facing downward and restart the timer by flipping it back so it is face up. To turn on  
Stop Watch  
The Stop Watch can be used to time an event and measure sub-intervals,  
such as lap times.  
1. From the idle screen, touch  
Games & Apps Tools   
Stop Watch.  
2. Touch Start to start timing an event.  
3. Touch Lap to measure each required sub-interval (up to 50).  
4. Touch Stop to stop timing.  
5. Touch Reset to erase all recorded times and start over.  
Games & Apps  
141  
 
urMusic  
This menu selection opens the Rogers music player and allows access to  
the urMusic online music store.  
For more information on using the Internet browser, see “Internet” on  
urMusic  
142  
   
IM  
Instant Messaging or IM is a way of sending short, simple messages that  
are delivered immediately to other users.  
Touch Menu Messages IM and select Windows Live or Yahoo!.  
Follow the onscreen prompts to sent up and use IM.  
Note: To use this feature, you must be subscribed to a message service. For further details,  
contact your service provider.  
For more information on using the Internet browser, see “Internet” on  
IM  
143  
   
MobileMail  
MobileMail lets you send email to any email address. Recipients can  
access your emails from email-equipped phones or from their computers.  
The messages you create can contain text only.  
Your phone allows selection of three online email services: Rogers Yahoo!  
Mail, Yahoo! Mail or Windows Live Hotmail. Follow the online instructions  
shown on your display after you launch this service.  
MobileMail  
144  
   
Settings  
This menu lets you customize numerous phone settings to suit your  
preferences.  
Sound Profile  
Sound profiles are groups of customized sound settings to make your  
phone behave differently in various situations. For example, you may want  
your incoming call ringtone to play loudly when you are outdoors.  
Your phone includes the following profiles:  
Normal: For use in situations that do not require special sound settings.  
Silent: For situations where you do not want your phone to use audible  
sounds, such as in a theater.  
Driving: For use while driving.  
Outdoor: For use outdoors or in loud environments where it may be  
difficult to hear alert tones.  
Select a Profile  
1. From the Idle screen, touch  
Settings  
Sound Profile.  
2. Choose a profile and touch the corresponding radio button at the right  
side. A message appears confirming that the profile has been saved.  
View and Change Profile Settings  
To view or change the settings for a profile, open the Sound Profile screen  
(see above) and touch the name of the profile you want to change.  
Each profile is divided into three setting categories you can select using the  
drop-down menu at the top right corner.  
Call: Lets you specify the way the phone alerts you to incoming calls.  
For example, you can choose to be alerted by a melody or by a melody  
Settings  
145  
         
and vibration. You can also specify ringtones and vibration pattern, and  
set audio volume.  
Message: Lets you specify the manner in which the phone alerts you to  
incoming messages, the message alert tone and the frequency of alert  
reminders.  
Phone: Lets you specify the sounds made by the phone when you press  
a key and turn the phone on or off.  
To see all options for a specific setting, touch the corresponding selection  
area. To select a setting, touch the corresponding radio button then touch  
Save. To change a volume setting, drag the slider to a new position using  
your fingertip.  
To save changes made to the profile settings, touch Save.  
Note: Settings related to sounds (ringtone, volume, etc.) are not applicable when altering the  
Silent profile so do not appear in the listings.  
Call Settings  
Call Alert Type: Specifies how you want to be alerted to incoming calls  
(Melody, Vibration then Melody, Vibration and Melody).  
Voice Call Ringtone: Lets you select a ringtone for incoming voice calls  
from the Ringtone folder.  
Ringtone Volume: Lets you specify the volume for the selected ringtone  
(level 1 to 7).  
Vibration Pattern: Specifies a vibration pattern (Vibration 1-5).  
Message Settings  
Message Alert Type: Lets you specify how you want to be alerted to  
incoming messages (Melody, Vibration, Vibration and Melody, or Mute).  
Message Alert Tone: Lets you specify an alert tone for incoming  
messages (Message Tone 1-6).  
Settings  
146  
Message Alert Repetition: Lets you specify whether the message alert  
tone notifies you of a new message only once, or periodically until you  
open the message.  
Alert Tone Volume: Lets you specify the volume for the selected alert  
tone (level 1 to 7).  
Vibration Pattern: Specifies a vibration pattern (Vibration 1-3).  
Phone Settings  
Keypad Tone: Lets you specify the tone played when you press a  
button on the keypad (Beep, Glossy or Mute).  
Power On Type: Lets you specify the phone response when you turn it  
on (Melody, Vibration, Vibration and Melody, or Mute).  
Power Off Type: Lets you specify the phone response when you turn it  
off (Melody, Vibration, Vibration and Melody, or Mute).  
Phone Sound Volume: Lets you specify the volume for the phone  
sounds (Level 0 to 7).  
Display and Light  
In this menu you can change settings for the display and backlight.  
Wallpaper  
The Wallpaper menu lets you change the background image displayed on  
the Idle screen.  
To change the wallpaper:  
1. From the Idle screen, touch  
Wallpaper.  
Settings  
Display and Light  
2. Drag the onscreen image to the left or right to view other images  
located in your Pictures folder as wallpaper.  
Settings  
147  
     
Touch Pictures to view image thumbnails with file names, then touch a  
thumbnail to view the image as wallpaper. While viewing images this  
way, you can drag the slider at the right of the screen to zoom in and  
out and touch Rotate to rotate the image 90 clockwise.  
Note: The menu bar and zoom slider disappear after a few seconds of screen inactivity. Touch  
anywhere on the screen to make them reappear.  
3. Touch Set to assign the current image as your wallpaper image.  
Widget  
This menu lets you select which widget applications appear in the Widget  
Bar on the Idle screen.  
1. From the Idle screen, touch  
Widget.  
Settings  
Display and Light  
2. As required, touch the check box next to each widget to add a check  
mark (widget appears in the Widget Bar) or remove the check mark  
(widget will not appear in the Widget Bar).  
3. Touch Save to save the changes.  
For more information on individual widgets and using widgets, see “Widget  
Font Type  
You can select the font used for all text displayed on the phone.  
1. From the Idle screen, touch  
Font Type.  
Settings  
Display and Light  
2. Touch the example of the font you want to use on your phone (Type1,  
Type2 or Type3).  
3. Touch Save.  
Settings  
148  
   
Greeting Message  
In this menu you can enter text for a greeting message that displays on the  
screen for a few seconds when the phone is turned on.  
1. From the Idle screen, touch  
Greeting Message.  
Settings  
Display and Light  
2. If there is an existing message, touch and hold  
to erase the  
message.  
3. Use the onscreen keypad/keyboard to enter a new greeting.  
4. Touch OK.  
Transition Effect  
Lets you activate or deactivate a “wipe” transition effect when moving  
between menu and option pages.  
1. From the Idle screen, touch  
Transition Effect.  
Settings  
Display and Light  
2. Touch On to activate the effect, Off to deactivate.  
3. Touch Save.  
Brightness  
Lets you to adjust the display brightness to compensate for different  
lighting conditions.  
1. From the Idle screen, touch  
Brightness.  
Settings  
Display and Light  
2. Using your fingertip, drag the Level slider to the brightness level you  
desire (range 1-5).  
3. Touch Save.  
Note: High brightness will reduce operating time before battery recharging is necessary.  
Settings  
149  
     
Backlight Time  
The setting lets you select the length of time the screen remains lit when  
the phone is idle.  
1. From the Idle screen, touch  
Backlight Time.  
Settings  
Display and Light  
2. Touch one of the backlight times to set the amount of time the phone’s  
touchscreen remains lit without activity. Options include: 8 Seconds, 15  
Seconds, 30 Seconds, 1 Minute, 3 Minutes and 10 Minutes.  
3. Touch Save.  
The phone can also be set to lock when the Backlight Time runs out (see  
Note: Long light time will reduce operating time before battery recharging is necessary.  
Time and Date  
Use this menu to configure the settings for the time and date display.  
1. From the Idle screen, touch  
Settings  
Time and Date.  
2. Change settings as required (see below).  
3. To save changes, touch <Save>.  
The following settings are available:  
Time Zone Updating: Lets you specify how the time zone information is  
updated Manual Only, Prompt First or Automatic).  
If Manual Only or Prompt First is selected, the following options are  
enabled:  
Time Zone: Lets you specify your location relative to Greenwich Mean  
Time. Using your fingertip, drag the map left or right until your location is  
visible. Touch your location on the map then touch OK. To enable or  
Settings  
150  
         
disable Daylight Saving Time, touch the sun symbol next to the time.  
The sun symbol turns orange when Daylight Savings Time is  
selected, gray if Daylight Savings Time is off.  
Time: Lets you change the time setting. Touch the Keypad tab to enter a  
time length using the keypad, or the Jog tab to scroll to the desired time.  
In Keypad mode, touch Hour or Minute as required and enter a setting  
using the keypad. In Jog mode, set the time by touching the + and -  
buttons or by sliding your fingertip over the numbers. If Time Format is  
set to 12 hr, touch AM or PM as required. Touch Set to save the new  
settings.  
Date: Lets you change the date setting. Touch the Keypad tab to enter  
the date using the keypad, or the Jog tab to scroll to the desired settings.  
In Keypad mode, touch Month, Day or Year as required and enter a  
setting using the keypad. In Jog mode, set the date by touching the +  
and - buttons or by sliding your fingertip over the numbers.  
Note: If Time Zone Updating is set to Automatic, the Time Zone, Time and Date are  
automatically set using network information and these options are greyed out on your phone.  
Time Format: Lets you specify the time format you prefer. Touch 12 hr  
(12 hour clock) or 24 hr (24 hour clock).  
Date Format: Lets you specify the date format you prefer. Touch the  
drop-down box and then a selection (DD/MM/YYYY, MM/DD/YYYY,  
YYYY/MM/DD, YYYY/DD/MM).  
Phone  
Use this menu to configure phone settings related to the user interface  
language, key lock, security, and Airplane Mode. You can also check the  
phone number of the phone.  
Settings  
151  
     
Language  
This menu allows you to select a display language for Screen Text and  
Input Language.  
To change Screen Text:  
1. From the Idle screen, touch  
Settings  
Phone  
Language.  
2. Touch Screen Text, then touch a selection. The choices are Automatic  
(language read from your SIM card), English, or Français (French).  
3. Touch Save.  
To change Input Language:  
1. From the Idle screen, touch  
Settings  
Phone  
Language.  
2. Touch Input Language, then touch a selection. The choices are  
English or Français (French).  
3. Touch Save.  
Vibration Feedback  
You can set the level of vibration intensity that occurs when you touch the  
screen and receive calls and messages.  
1. From the Idle screen, touch  
Settings  
Phone  
Vibration Feedback.  
2. Drag the Vibration Intensity slider to the intensity level you desire  
(range 0-4).  
3. Touch Save.  
Settings  
152  
   
Calibration  
The Calibration function allows you to re-align the screen’s touch accuracy  
if the device does not respond properly to your touch.  
1. From the Idle screen, touch  
Settings  
Phone  
Calibration.  
2. Carefully touch the center of each target displayed.  
3. Touch Yes to confirm and save the new settings.  
Note: Accurate calibration requires that you carefully touch the centre of each target. This is  
more easily done if you place the phone on a flat surface rather than holding it in your hand.  
Motion Detection  
The Motion Detection feature can be used to mute an incoming call or  
alarm, activate snooze when an alarm sounds, and start and restart the  
timer.  
1. From the Idle screen, touch  
Settings  
PhoneMotion  
Detection.  
2. Touch On to activate the Motion Detection feature, touch Off to  
deactivate it.  
For more information on using Motion Detection see “Other Answer  
Auto Keypad Lock  
The Auto Keypad Lock feature locks your phone whenever the backlight  
LOCK  
turns off. Press  
to unlock the keypad.  
Settings  
2. At the Auto Keypad Lock field, touch On or Off.  
1. From the Idle screen, touch  
Phone.  
Settings  
153  
       
For information on setting the Backlight Time settings, see “Backlight Time”  
Own Number  
Shows you the phone number assigned to the SIM in your phone.  
From the Idle screen, touch  
Own Number.  
Settings  
Phone  
Security  
The Security feature lets you restrict the use of your phone by others and  
restrict the types of calls. Various codes and passwords are used to protect  
the features of your phone.  
From the Idle screen, touch  
Settings  
PhoneSecurity.  
The following options are available.  
Lock Phone: When the phone lock is enabled, the phone password  
must be entered each time the phone is switched on. The phone remains  
operational until switched off. To change the phone password, see  
“Change Password” below.  
Lock SIM Card: When the Lock SIM Card feature is enabled, your  
phone only works with the current SIM. To lock the SIM card touch On,  
enter a 4 to 8 digit password and touch Confirm, then enter it again and  
touch Confirm a second time. To deactivate the SIM and allow use of a  
different SIM card, touch Off, enter the password and touch Confirm.  
Check PIN Code: When the Check PIN Code feature is enabled, your  
PIN must be entered each time the phone is switched on. Before Check  
PIN Code can be disabled, you must enter your PIN.  
Lock Applications: Using this option you can lock various phone  
applications, which requires entry of the phone’s password to access the  
Settings  
154  
application. Touch the check box next to each application to add a check  
mark (application locked) or remove the check mark (application  
unlocked). Touch Save to save the settings.  
Fixed Dialing Mode: FDN (Fixed Dial Number) mode, if supported by  
your SIM card, allows you to restrict outgoing calls to phone numbers  
stored in the FDN List. To set this mode you must enter your PIN2 code.  
Note: Not all SIM cards have a PIN2 code. If your SIM card does not, this menu does not  
display.  
Change Password: Allows you to change your current phone  
password. Enter the current password and touch Confirm, enter the new  
password and touch Confirm, enter the new password again and touch  
Confirm a second time.  
Change PIN Code: Allows you to change your current PIN, provided  
that the PIN Check feature is enabled. Enter the current PIN and touch  
Confirm, enter the new PIN and touch Confirm, enter the new PIN  
again and touch Confirm a second time.  
Change PIN2 Code: Allows you to change your current PIN2 to a new  
one. Enter the current PIN2 and touch Confirm, enter the new PIN2 and  
touch Confirm, enter the new PIN2 again and touch Confirm a second  
time.  
Reset Phone  
Reset returns your phone to its default settings but does not delete user  
data such as contacts, messages, pictures, videos, and music.  
To reset your phone:  
1. From the Idle screen, touch  
Settings  
Phone  
Reset Phone.  
2. At the Continue? prompt, touch Yes to reset, or No to cancel.  
3. Enter your phone password and touch Confirm.  
Settings  
155  
 
When the reset procedure finishes, the phone displays “Reset Phone done”  
and then restarts.  
Restore Phone  
The Restore Phone option resets your phone to default settings, similarly to  
the Reset Phone option described above, but also deletes all user data.  
Note: All user data such as contacts, messages, pictures, videos, and music will be deleted.  
Airplane Mode  
For locations where you are not permitted to send or receive calls and  
access online information, this operating mode turns off those capabilities  
but lets you use all other phone functions (games, calculator, etc.). When it  
is on, the Airplane Mode icon (  
icon.  
) appears in place of the signal strength  
1. From the Idle screen, touch  
Settings Phone.  
2. At the Airplane Mode field, touch On or Off.  
Calls  
Call settings let you configure the actions taken by the phone when you  
make and receive calls.  
1. From the Idle screen, touch  
Settings  
Calls.  
General Call Settings  
This menu lets you configure high-level features that specify how calls are  
handled. Touch General and select from the following options:  
Show My Number: Lets you specify how your ID is handled when you  
initiate an outgoing call.  
Settings  
156  
         
Set by Network: You are identified to the recipient using the default  
network information.  
Hide Number: Your identification is hidden from the recipient.  
Show Number: Your phone number and name are sent to the  
recipient.  
Auto Reject: If Auto Reject is On, your phone rejects all calls from  
numbers on the reject list. You can manually enter a number and add it  
to the list or search for a number in Call History or Contacts.  
Call Answer: Selects the available methods for answering a call on your  
phone (Send Key, Any Key, Automatic). The phone can always be  
answered by pressing  
.
Auto Reply: Lets you create an automatic text message that is sent to  
the calling party when a call is rejected.  
Call Status Tones: Lets you activate alert tones that sound during a  
call.  
Call Connect Tone: Sounds a tone when a call connection is  
successful.  
Minute Minder: Sounds a tone after each minute of a call.  
Alerts on Call: Lets you specify whether you want alert tones to sound  
while you are on a call.  
Voice Call  
This menu lets you configure the default settings for voice call features.  
Call Forwarding  
Call forwarding lets you reroute incoming calls to another number or to your  
voicemail. Availability of the various options depends on your service  
provider. Contact your provider for more details on enabling this feature.  
Possible call forwarding actions are:  
Forward Always: Forwards all voice calls and data calls.  
Settings  
157  
     
Busy: Forwards calls only when your number is in use and the caller  
would otherwise receive a busy signal.  
No Reply: Automatically forwards all calls after a preset time (5, 10, 15,  
20, 25 or 30 Seconds).  
Unreachable: Forwards calls when you are not in an area covered by  
your service provider or when your phone is switched off.  
Cancel All: Deactivates call forwarding.  
The phone sends your settings to the network and the network’s  
acknowledgement is displayed.  
Call Barring  
Call Barring allows you to restrict various types of calls from being made or  
received with your phone, such as all outgoing calls or international calls.  
This option is SIM dependent and requires a subscription. For more  
information, contact your service provider.  
Call Waiting  
Call Waiting informs you when someone is trying to reach you during  
another call. Touch Activate, Deactivate or Check Status.  
Auto Redial  
Auto Redial lets you configure your phone to automatically redial the last  
dialed number if the connection is lost or the call was unable to connect.  
Note: For carriers that automatically divert unanswered calls to voice mail, the Auto redial  
feature will not provide useful service.  
Connectivity  
The Connectivity menu let you manage the settings associated with  
Bluetooth and Network connections.  
Settings  
158  
                 
Bluetooth  
Bluetooth is a short-range wireless communications technology capable of  
exchanging information over a distance of about 30 feet.  
Activation  
To turn Bluetooth on or off:  
1. From the Idle screen, touch  
Settings  
Connectivity   
Bluetooth.  
2. Touch the onscreen phone icon to turn Bluetooth on (icon turns blue) or  
off (icon turns gold).  
Bluetooth  
Inactive  
Bluetooth  
Active  
Note: Turn off Bluetooth when it is not required to save battery life and in situations where  
Bluetooth use is prohibited, such as on airplanes.  
Device Name  
To change your Bluetooth device name:  
1. From the Idle screen, touch  
Settings  
Connectivity   
Bluetooth My Info.  
2. Touch the Name field, touch and hold  
to erase the current name.  
Settings  
159  
         
3. Use the onscreen keypad/keyboard to enter the new name for this  
device and touch OK.  
Phone Visibility  
1. From the Idle screen, touch  
Settings  
Connectivity   
Bluetooth Visibility.  
2. Touch Yes or No to enable or disable the visibility (discoverability) of  
your phone.  
Note: When Bluetooth Visibility is turned on, your phone is wirelessly transmitting its name and  
status to every device within range. This transmission can pose a security risk and risk  
unauthorized connection to your phone. It is recommended that you remain hidden unless  
necessary. If your phone is not visible, you can still detect and connect to other devices.  
Connecting to Other Bluetooth Devices  
1. From the Idle screen, touch  
Settings  
Connectivity   
Bluetooth Search. Detected Bluetooth devices appear as buttons  
on the Bluetooth page.  
2. Touch the button for the desired device to begin pairing.  
3. Touch the Passkey field, enter the passkey used by the target device  
and touch OK.  
4. Touch the Connection Options field and select Automatic (to have  
the two devices always pair when within range) or Always ask.  
5. Touch Pair.  
When the pairing is accepted by the target device, the device icon on  
the Bluetooth page turns green.  
Remote SIM Control  
Remote SIM mode lets a Bluetooth phone car kit access contact  
information stored on the SIM card in your phone in order to make hands-  
free calls, etc.  
Settings  
160  
 
1. From the Idle screen, touch  
Settings  
Connectivity   
Bluetooth My Info. At the Remote SIM Control field, touch On or  
Off.  
2. Touch Save.  
Note: There is a risk that another Bluetooth device could be used to access and modify your SIM  
card features and data.  
Bluetooth Services  
The Bluetooth specification is a protocol that describes how the short-range  
wireless technology works, whereas individual profiles describe the  
services supported by individual devices. Profiles reduce the chance that  
different devices will not work together.  
The following service profiles are supported by your phone:  
Headset: Enables both incoming and outgoing calls using Bluetooth  
headsets.  
Handsfree: A Bluetooth car kit or speakerphone enables both incoming  
and outgoing calls.  
Bluetooth Stereo Headset: Used to make calls and listen to music  
through the Bluetooth stereo headset.  
Serial Port: Used to connect Bluetooth devices through a virtual serial  
port.  
Dial up: Used to provide Internet access for Bluetooth devices through  
the phone’s modem.  
Basic Printing: used to print images, text messages, personal data  
such as namecards and appointments, etc. through a remote Bluetooth  
printer.  
File transfer: Used to transfer files to and from Bluetooth devices.  
Object Push: Used to exchange personal data (namecards, contacts,  
etc.) with Bluetooth devices.  
Settings  
161  
 
SIM Access: Allows access to the SIM card in the phone.  
Network Selection  
Network selection lets you configure the phone to automatically select the network  
used when roaming outside of your home area or allow manual selection.  
Note: You can select a network other than your home network only if there is a valid roaming  
agreement between them.  
1. From the Idle screen, touch  
Settings  
Connectivity   
Network Selection.  
2. Touch Automatic to connect to the first available network when  
roaming or Manual to have the phone scan for available networks.  
3. Touch Save.  
4. If you selected Manual, the phone displays a list of available networks.  
Touch the name of the network you want to use. Your phone connects  
to the selected network.  
Select USB Mode  
Your phone can be configured to launch a default application when an  
active USB connection is detected.  
1. From the Idle screen, touch  
Settings  
Connectivity   
Select USB Mode.  
2. Touch one of the following options:  
Ask on Connection: The phone opens a selection window that  
requires you to choose the connection type (Media Player, PC Studio  
or Mass Storage, see below).  
Samsung PC Studio: The phone is automatically recognized by  
Samsung PC Studio, a Windows-based PC program that can be  
used to manage personal data and multimedia files or access the  
Internet using the phone as a modem.  
Settings  
162  
       
Media Player: Allows you to transfer multimedia files between your  
phone and a PC using Microsoft MTP (Media Transfer Protocol),  
which supports Autosync of content from Windows Media Player and  
DRM (digital rights management).  
Mass Storage: The PC recognizes a microSD card in your phone as  
a storage drive, allowing you to transfer files to and from the card.  
The card name appears in the list of disk drives in My Computer on  
the PC.  
3. Touch Save.  
Network Profiles  
Network Profiles lets you view profiles containing the settings for  
connecting your phone to the network and streaming for the Internet  
browser and sending picture messages. The possible profiles are:  
GoRogers, Rogers Media, Rogers Internet and Rogers Tethering.  
Note: Do not change any settings in these profiles unless instructed to do so by your service  
provider or the Internet and multimedia features may not work properly.  
Applications Settings  
The Applications Settings menu provides a convenient way to access most  
settings menus for phone functions from one list. These menus can be  
accessed from their respective applications as well and most are described  
in more detail in other sections of this manual.  
1. From the Idle screen, touch  
Settings  
Applications Settings.  
2. Select the application.  
For more information, see the following sections:  
Communities: See page 111.  
Messages: See page 98.  
Settings  
163  
     
Browser: See page 83.  
Music Player: See page 122.  
Record Audio: See page 130.  
Calendar: See page 135.  
Contacts: See page 71.  
Memory Management  
Clear Phone Memory  
Lets you clear various segments of phone memory or all memory.  
1. From the Idle screen, touch  
Settings  
Memory Management Clear Phone Memory.  
2. As required, touch the check box next to each memory segment to be  
cleared to add a check mark, or touch All to clear all memory.  
3. Touch Clear.  
4. Enter the phone password and press Confirm.  
5. Touch Yes to confirm the operation, No to cancel.  
Memory Card Details  
Allows you to view information related to the current microSD card being  
used for storage.  
Name: The name assigned to the SD card  
Maximum: Storage capacity of the card  
Available: Free space on the card  
The following options are available:  
Bluetooth Visibility: Lets you turn Bluetooth visibility On and Off  
Format: Erases all data on the card. Touch Yes to confirm, No to  
cancel.  
Settings  
164  
   
Rename: Lets you edit the name assigned to the microSD card.  
Memory Status  
Let you view used and available memory in the following categories:  
Shared Memory, Messages, Media, Calendar, Tasks, Memo, Contacts.  
1. From the Idle screen, touch  
Settings  
Memory Management Memory Status.  
2. Touch the memory location for which you want to view status.  
Phone Status  
Phone Status provides the following information for your phone:  
My Number: Phone number of the SIM card used in the phone.  
Manufacturer: Samsung  
Model: SGH-A886  
Device ID (IMEI)  
Software Version: the version number of the phone operating software  
Language: Phone operating language (as set in the Language settings,  
Client Version  
Settings  
165  
     
Solving Problems  
If you are experiencing problems with your phone, perform the following  
simple checks before contacting a service professional. This may save you  
the time and expense of an unnecessary service call.  
When you switch your phone on, one of the following  
messages appears  
Insert SIM Card  
Check that the SIM card is correctly installed.  
Phone Locked Enter Password  
The automatic locking function has been enabled. You must enter the  
phone’s password before you can use the phone.  
Enter PIN  
You are using your phone for the first time. You must enter the Personal  
Identification Number (PIN) supplied with the SIM card.  
The PIN Check feature is enabled. Every time the phone is switched on,  
the PIN has to be entered. To disable this feature, use the Check PIN  
Code menu (see Security in “Phone” on page 151).  
Enter PUK  
The PIN code was entered incorrectly three times in succession and the  
phone is now blocked. Enter the PUK supplied by your service provider.  
Phones use both PIN1 and PIN2 codes, which require PUK1 and PUK2  
codes to unblock. Make sure you know which PIN code is locked and  
apply the correct PUK code.  
Solving Problems  
166  
   
“No service,” “Network failure” or “Not done” displays  
The network connection was lost. You may be in a weak signal area (in a  
tunnel or surrounded by buildings). Change location and try again.  
You are trying to access an option for which you have not taken out a  
subscription with your service provider. Contact the service provider for  
further details.  
You have entered a number but it was not dialed  
Have you pressed the  
key?  
Are you accessing the right cellular network?  
Is Call Barring turned on? (see “Call Barring” on page 158 for more  
details).  
Your correspondent cannot reach you  
Is your phone switched on (the  
key pressed for more than one  
second)?  
Are you accessing the right cellular network?  
Is Call Barring turned on? (see “Call Barring” on page 158 for more  
details).  
Has your phone been call forwarded to another number?  
Your correspondent cannot hear you speaking  
Have you switched off the microphone?  
Are you holding the phone close enough to your mouth? The  
microphone is located at the bottom of the phone.  
The phone starts beeping and “Low Battery” flashes on the  
display  
Your battery is insufficiently charged. Recharge the battery.  
Solving Problems  
167  
The audio quality of the call is poor  
Check the signal strength indicator on the display (  
); the number of  
) to weak ( ).  
bars indicates the signal strength from strong (  
Try moving the phone slightly or move closer to a window if you are in a  
building.  
No number is dialed when you recall a Contacts entry  
Check that the number has been stored correctly, by using the Contact  
List Search feature.  
Store the number again, if necessary.  
If the above guidelines do not help you to solve the problem, take note  
of:  
the model and serial numbers of your phone  
your warranty details  
a clear description of the problem  
Then contact your local dealer or Samsung after-sales service.  
Solving Problems  
168  
Health and Safety Information  
Warning Regarding Display  
The display on your handset is made of glass or acrylic and could break if  
your handset is dropped or if it receives significant impact. Do not use if  
screen is broken or cracked as this could cause injury to you.  
Exposure to Radio Frequency (RF) Signals  
Your wireless phone is a radio transmitter and receiver. It is designed and  
manufactured not to exceed the emission limits for exposure to radio  
frequency (RF) energy set by the Federal Communications Commission  
(FCC) of the U.S. Government. These limits are part of comprehensive  
guidelines and establish permitted levels of RF energy for the general  
population. The guidelines are based on the safety standards that were  
developed by independent scientific organizations through periodic and  
thorough evaluation of scientific studies.  
The standards include a substantial safety margin designed to assure the  
safety of all persons, regardless of age and health.  
The exposure standard for wireless phones employs a unit of  
measurement known as Specific Absorption Rate (SAR). The SAR limit  
*
recommended by the FCC is 1.6W/kg.  
SAR tests are conducted using standard operating positions specified by  
the FCC with the phone transmitting at its highest certified power level in all  
*. In the U.S. and Canada, the SAR limit for mobile phones  
used by the public is 1.6 watts/kg (W/kg) averaged over one  
gram of tissue. The standard incorporates a substantial mar-  
gin of safety to give additional protection for the public and  
to account for any variations in measurements.  
Health and Safety Information  
169  
           
tested frequency bands. Although the SAR is determined at the highest  
certified power level, the actual SAR level of the phone while operating can  
be well below the maximum value. This is because the phone is designed  
to operate at multiple power levels so as to use only the power required to  
reach the network. In general, the closer you are to a wireless base station  
antenna, the lower the power output of the phone.  
Before a new model phone is available for sale to the public, it must be  
tested and certified by the FCC that it does not exceed the limit established  
by the government adopted requirement for safe exposure. The tests are  
performed in positions and locations (e.g., at the ear and worn on the body)  
as required by the FCC for each model. While there may be differences  
between the SAR levels of various phones and at various positions, they all  
meet the government requirement.  
The FCC has granted an Equipment Authorization for this model phone  
with all reported SAR levels evaluated as in compliance with the FCC RF  
exposure guidelines. SAR information on this model phone is on file with  
the FCC and can be found under the Display Grant section of http://  
www.fcc.gov/oet/fccid after searching on FCC ID printed in the label on the  
phone.  
For Body Operation  
For body worn operation, this model phone has been tested and meets the  
FCC RF exposure guidelines when used with a Samsung-supplied or  
approved accessory designated for this product or when used with an  
accessory that contains no metal and that positions the phone a minimum  
from the body.  
The minimum distance from the body for this model phone is written in the  
FCC certification information. Non-compliance with the above conditions  
may violate FCC RF exposure guidelines.  
For more Information concerning exposure to radio frequency signals, see  
the following Internet sites:  
Health and Safety Information  
170  
 
Federal Communications Commission (FCC)  
•http://www.fcc.gov  
Cellular Telecommunications Industry Association (CTIA):  
•http://www.ctia.org  
U.S.Food and Drug Administration (FDA)  
•http://www.fda.gov/cdrh/consumer  
World Health Organization (WHO)  
•http://www.who.int/peh-emf/en  
Precautions When Using Batteries  
Never use any charger or battery that is damaged in any way.  
Use the battery only for its intended purpose.  
If you use the phone near the network’s base station, it uses less power;  
talk and standby time are greatly affected by the signal strength on the  
cellular network and the parameters set by the network operator.  
Battery charging time depends on the remaining battery charge, the type  
of battery and the charger used. The battery can be charged and  
discharged hundreds of times, but it will gradually wear out. When the  
operation time (talk time and standby time) is noticeably shorter than  
normal, it is time to buy a new battery.  
If left unused, a fully charged battery will discharge itself over time.  
Use only Samsung-approved batteries and recharge your battery only  
with Samsung-approved chargers. When a charger is not in use,  
disconnect it from the power source.  
Do not leave the battery connected to a charger for more than a week,  
since overcharging may shorten its life.  
Extreme temperatures will affect the charging capacity of your battery: it  
may require cooling or warming first.  
Health and Safety Information  
171  
   
Do not leave the battery in hot or cold places, such as in a car in summer  
or winter conditions, as you will reduce the capacity and lifetime of the  
battery. Always try to keep the battery at room temperature. A phone  
with a hot or cold battery may temporarily not work, even when the  
battery is fully charged. Li-ion batteries are particularly affected by  
temperatures below 0 C (32 F).  
Do not short-circuit the battery. Accidental short-circuiting can occur  
when a metallic object (coin, clip or pen) causes a direct connection  
between the + and terminals of the battery (metal strips on the battery),  
for example when you carry a spare battery in a pocket or bag.  
Shortcircuiting the terminals may damage the battery or the object  
causing the short-circuiting.  
Dispose of used batteries in accordance with local regulations. Always  
recycle. Do not dispose of batteries in a fire.  
Note: The battery charging circuit may stop functioning if you are viewing a streaming video and  
receive a call while charging as the capacity of the charging circuit will be exceeded.  
Operating Environment  
Remember to follow any special regulations in force in any area and always  
switch your phone off whenever it is forbidden to use it, or when it may  
cause interference or danger.  
When connecting the phone or any accessory to another device, read its  
user’s guide for detailed safety instructions. Do not connect incompatible  
products.  
As with other mobile radio transmitting equipment, users are advised that  
for the satisfactory operation of the equipment and for the safety of  
personnel, it is recommended that the equipment should only be used in  
the normal operating position (held to your ear with the antenna pointing  
over your shoulder).  
Health and Safety Information  
172  
   
Electronic Devices  
Most modern electronic equipment is shielded from radio frequency (RF)  
signals. However, certain electronic equipment may not be shielded  
against the RF signals from your wireless phone. Consult the manufacturer  
to discuss alternatives.  
Pacemakers  
Pacemaker manufacturers recommend that a minimum distance of 15 cm  
(6 inches) be maintained between a wireless phone and a pacemaker to  
avoid potential interference with the pacemaker. These recommendations  
are consistent with the independent research and recommendations of  
Wireless Technology Research.  
Persons with pacemakers:  
should always keep the phone more than 15 cm (6 inches) from their  
pacemaker when the phone is switched on.  
should not carry the phone in a breast pocket.  
should use the ear opposite the pacemaker to minimize potential  
interference.  
If you have any reason to suspect that interference is taking place, switch  
your phone off immediately.  
Hearing Aids  
Some digital wireless phones may interfere with some hearing aids. In the  
event of such interference, you may wish to consult your hearing aid  
manufacturer to discuss alternatives.  
Health and Safety Information  
173  
 
Audio Shock  
At very high volumes, prolonged listening to a headset can damage your  
hearing.  
Other Medical Devices  
If you use any other personal medical devices, consult the manufacturer of  
your device to determine if it is adequately shielded from external RF  
energy. Your physician may be able to assist you in obtaining this  
information. Switch your phone off in health care facilities when any  
regulations posted in these areas instruct you to do so. Hospitals or health  
care facilities may be using equipment that could be sensitive to external  
RF energy.  
Vehicles  
RF signals may affect improperly installed or inadequately shielded  
electronic systems in motor vehicles. Check with the manufacturer or its  
representative regarding your vehicle. You should also consult the  
manufacturer of any equipment that has been added to your vehicle. You  
should also consult the manufacturer of any equipment that has been  
added to your vehicle.  
Posted Facilities  
Switch your phone off in any facility where posted notices require you to do  
so.  
Potentially Explosive Environments  
Switch your phone off when in any area with a potentially explosive  
atmosphere and obey all signs and instructions. Sparks in such areas  
could cause an explosion or fire resulting in bodily injury or even death.  
Health and Safety Information  
174  
   
Users are advised to switch the phone off while at a refueling point (service  
station). Users are reminded of the need to observe restrictions on the use  
of radio equipment in fuel depots (fuel storage and distribution areas),  
chemical plants or where blasting operations are in progress.  
Areas with a potentially explosive atmosphere are often but not always  
clearly marked. They include the areas below deck on boats, chemical  
transfer or storage facilities, vehicles using liquefied petroleum gas (such  
as propane or butane), areas where the air contains chemicals or particles,  
such as grain, dust or metal powders, and any other area where you would  
normally be advised to turn off your vehicle engine.  
Emergency Calls  
This phone, like any wireless phone, operates using radio signals, wireless  
and landline networks as well as user-programmed functions, which cannot  
guarantee connection in all conditions. Therefore, you should never rely  
solely on any wireless phone for essential communications (medical  
emergencies, for example).  
Remember, to make or receive any calls the phone must be switched on  
and in a service area with adequate signal strength. Emergency calls may  
not be possible on all wireless phone networks or when certain network  
services and/or phone features are in use. Check with local service  
providers.  
To make an emergency call:  
1. If the phone is not on, switch it on.  
2. Key in the emergency number for your present location (for example,  
911 or other official emergency number). Emergency numbers vary by  
location.  
3. Press the  
key.  
Health and Safety Information  
175  
   
If certain features are in use (call barring, for example), you may first need  
to deactivate those features before you can make an emergency call.  
Consult this document and your local cellular service provider.  
When making an emergency call, remember to give all the necessary  
information as accurately as possible. Remember that your phone may be  
the only means of communication at the scene of an accident; do not cut off  
the call until given permission to do so.  
Other Important Safety Information  
Only qualified personnel should service the phone or install the phone in  
a vehicle. Faulty installation or service may be dangerous and may  
invalidate any warranty applicable to the device.  
Check regularly that all wireless phone equipment in your vehicle is  
mounted and operating properly.  
Do not store or carry flammable liquids, gases or explosive materials in  
the same compartment as the phone, its parts or accessories.  
For vehicles equipped with an air bag, remember air bag inflates with  
great force. Do not place installed or portable wireless equipment in the  
area over the air bag or in the air bag deployment area. If wireless  
equipment is improperly installed, and the air bag inflates, serious injury  
could result.  
Switch your phone off before boarding an aircraft. The use of wireless  
phones in aircraft is illegal unless permitted and may be dangerous to  
the aircraft’s operation.  
Failure to observe these instructions may lead to the suspension or  
denial of telephone services to the offender, legal action, or both.  
Health and Safety Information  
176  
 
Care and Maintenance  
Your phone is a product of superior design and craftsmanship and should  
be treated with care. The suggestions help you fulfill any warranty  
obligations and allow enjoy this product for many years:  
Keep the phone and all its parts and accessories out of reach of small  
children.  
Keep the phone dry. Precipitation and humidity contain minerals that  
may corrode electronic circuits.  
Do not use the phone with a wet hand. Doing so may cause an electric  
shock to you or damage to the phone.  
Do not use or store the phone in dusty or dirty areas. Moving parts may  
become damaged or clogged.  
Do not store the phone in hot areas. High temperatures can shorten the  
life of electronic devices, damage batteries, and warp or melt certain  
plastics.  
Do not store the phone in cold areas. When the phone warms up to its  
normal operating temperature, moisture can form inside the phone,  
which may damage the phone’s electronic circuit boards.  
Do not drop, knock or shake the phone. Rough handling can break  
internal circuit boards.  
Do not use harsh chemicals, cleaning solvents or strong detergents to  
clean the phone. Wipe it with a soft cloth slightly dampened in a mild  
soap-and-water solution.  
Do not paint the phone. Paint can clog the device’s moving parts and  
prevent proper operation.  
Do not put the phone in or on heating devices, such as a microwave  
oven, a stove or a radiator. The phone may explode when overheated.  
Health and Safety Information  
177  
     
Use only the supplied or an approved replacement antenna.  
Unauthorized antennas or modified accessories may damage the phone  
and violate regulations governing radio devices.  
If the phone, battery, charger or any accessory is not working properly,  
take it to your nearest qualified service facility. The personnel there will  
assist you, and if necessary, arrange for service.  
FCC Notice  
Cautions  
Modifications not expressly approved by the party responsible for  
compliance could void the user's authority to operate the equipment.  
FCC Compliance Information  
This device complies with Part 15 of FCC Rules. Operation is subject to the  
following two conditions:  
1. This device may not cause harmful interference, and  
2. This device must accept any interference received.  
Including interference that may cause undesired operation.  
Information to User  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation.  
This equipment generates, uses and can radiate radio frequency energy  
and, if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this  
Health and Safety Information  
178  
   
equipment does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/ TV technician for help.  
Appendix A: Certification Information (SAR)  
THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS  
FOR EXPOSURE TO RADIO WAVES.  
Your wireless phone is a radio transmitter and receiver. It is designed and  
manufactured not to exceed the emission limits for exposure to radio  
frequency (RF) energy set by the Federal Communications Commission of  
the U.S. Government. These limits are part of comprehensive guidelines  
and establish permitted levels of RF energy for the general population. The  
guidelines are based on safety standards that were developed by  
independent scientific organizations through periodic and thorough  
evaluation of scientific studies. The standards include a substantial safety  
margin designed to assure the safety of all persons, regardless of age and  
health.  
The exposure standard for wireless mobile phones employs a unit of  
measurement known as the Specific Absorption Rate (SAR). The SAR limit  
*
set by the FCC is 1.6 W/kg . SAR Tests are conducted using standard  
operating positions accepted by the FCC with the phone transmitting at its  
highest certified power level in all tested frequency bands. Although the  
SAR is determined at the highest certified power level, the actual SAR level  
of the phone while operating can be well below the maximum value. This is  
Health and Safety Information  
179  
     
because the phone is designed to operate at multiple power levels so as to  
use only the power required to reach the network. In general, the closer  
you are to a wireless base station antenna, the lower the power output.  
Before a new model phone is available for sale to the public, it must be  
tested and certified by the FCC that it does not exceed the limit established  
by the government adopted requirement for safe exposure. The tests are  
performed in positions and locations(e.g., at the ear and worn on the body)  
as required by the FCC for each model. The highest SAR values of this  
model phone as reported to FCC are:  
GSM 850  
GSM 1900  
Head: 0.97 W/kg  
Body: 0.92 W/kg  
WCDMA 850  
Head: 0.85 W/kg  
Body: 0.63 W/kg  
Head: 0.66 W/kg  
Body: 0.40 W/kg  
WCDMA 1900  
Head: 1.18 W/kg  
Body: 0.44 W/kg  
Body-worn operations are restricted to Samsung-supplied, approved or  
non-Samsung designated accessories that have no metal and must  
provide at least 1.5cm separation between the device, including its antenna  
whether extended or retracted, and the user’s body. Non-compliance to the  
above restrictions may violate FCC RF exposure guidelines.  
The FCC has granted an Equipment Authorization for this model phone  
with all reported SAR levels evaluated as in compliance with the FCC RF  
exposure guidelines. SAR information on this model phone is on file with  
*. In the United States and Canada, the SAR limit for mobile  
phones used by the public is 1.6 watts/kilogram (W/kg) aver-  
aged over one gram of tissue. The standard incorporates a  
substantial margin of safety to give additional protection for  
the public and to account for any variations in measure-  
ments.  
Health and Safety Information  
180  
 
the FCC and can be found under the Display Grant section of  
http://www.fcc.gov/oet/fccid.  
Health and Safety Information  
181  
Appendix B: Safe and Responsible Wireless  
Phone Use  
Cellular Telecommunications & Internet Association  
“Safety is the most important call you will ever make.”  
A Guide to Safe and Responsible Wireless Phone Use  
Tens of millions of people in North America today take advantage of the  
unique combination of convenience, safety and value delivered by the  
wireless telephone. Quite simply, the wireless phone gives people the  
powerful ability to communicate by voice-almost anywhere, anytime with  
the boss, with a client, with the kids, with emergency personnel or even  
with the police. Each year, North Americans make billions of calls from their  
wireless phones, and the numbers are rapidly growing.  
But an important responsibility accompanies those benefits, one that every  
wireless phone user must uphold. When driving a car, driving is your first  
responsibility. A wireless phone can be an invaluable tool, but good  
judgment must be exercised at all times while driving a motor vehicle  
whether on the phone or not.  
The basic lessons are ones we all learned as teenagers. Driving requires  
alertness, caution and courtesy. It requires a heavy dose of basic common  
sense-keep your head up, keep your eyes on the road, check your mirrors  
frequently and watch out for other drivers. It requires obeying all traffic  
signs and signals and staying within the speed limit. It means using seat  
belts and requiring other passengers to do the same.  
But with wireless phone use, driving safely means a little more. This  
brochure is a call to wireless phone users everywhere to make safety their  
first priority when behind the wheel of a car. Wireless telecommunications  
is keeping us in touch, simplifying our lives, protecting us in emergencies  
and providing opportunities to help others in need. When it comes to the  
use of wireless phones, safety is your most important call.  
Health and Safety Information  
182  
   
Wireless Phone “Safety Tips”  
Below are safety tips to follow while driving and using a wireless phone  
which should be easy to remember:  
1. Get to know your wireless phone and its features such as speed dial  
and redial. Carefully read your instruction manual and learn to take  
advantage of valuable features most phones offer, including automatic  
redial and memory. Also, work to memorize the phone keypad so you  
can use the speed dial function without taking your attention off the  
road.  
2. When available, use a hands free device. A number of hands free  
wireless phone accessories are readily available today. Whether you  
choose an installed mounted device for your wireless phone or a  
speaker phone accessory, take advantage of these devices if available  
to you.  
3. Position your wireless phone within easy reach. Make sure you place  
your wireless phone within easy reach and where you can grab it  
without removing your eyes from the road. If you get an incoming call at  
an inconvenient time, if possible, let your voice mail answer it for you.  
4. Suspend conversations during hazardous driving conditions or  
situations. Let the person you are speaking with know you are driving; if  
necessary, suspend the call in heavy traffic or hazardous weather  
conditions. Rain, sleet, snow and ice can be hazardous, but so is heavy  
traffic. As a driver, your first responsibility is to pay attention to the road.  
5. Do not take notes or look up phone numbers while driving. If you are  
reading an Contact list or business card, or writing a to do list while  
driving a car, you are not watching where you are going. It’s common  
sense. Don’t get caught in a dangerous situation because you are  
reading or writing and not paying attention to the road or nearby  
vehicles.  
Health and Safety Information  
183  
 
6. Dial sensibly and assess the traffic; if possible, place calls when you  
are not moving or before pulling into traffic. Try to plan your calls before  
you begin your trip or attempt to coincide your calls with times you may  
be stopped at a stop sign, red light or otherwise stationary. But if you  
need to dial while driving, follow this simple tip-dial only a few numbers,  
check the road and your mirrors, then continue.  
7. Do not engage in stressful or emotional conversations that may be  
distracting. Stressful or emotional conversations and driving do not  
mix-they are distracting and even dangerous when you are behind the  
wheel of a car. Make people you are talking with aware you are driving  
and if necessary, suspend conversations which have the potential to  
divert your attention from the road.  
8. Use your wireless phone to call for help. Your wireless phone is one of  
the greatest tools you can own to protect yourself and your family in  
dangerous situations-with your phone at your side, help is only three  
numbers away. Dial 9-1-1 or other local emergency number in the case  
of fire, traffic accident, road hazard or medical emergency. Remember,  
it is a free call on your wireless phone!  
9. Use your wireless phone to help others in emergencies. Your wireless  
phone provides you a perfect opportunity to be a Good Samaritan in  
your community. If you see an auto accident, crime in progress or other  
serious emergency where lives are in danger, call 9-1-1 or other local  
emergency number, as you would want others to do for you.  
10. Call roadside assistance or a special wireless non emergency  
assistance number when necessary. Certain situations you encounter  
while driving may require attention, but are not urgent enough to merit  
a call for emergency services. But you still can use your wireless phone  
to lend a hand. If you see a broken-down vehicle posing no serious  
hazard, a broken traffic signal, a minor traffic accident where no one  
appears injured or a vehicle you know to be stolen, call roadside  
assistance or other special non-emergency wireless number.  
Health and Safety Information  
184  
Careless, distracted individuals and people driving irresponsibly represent  
a hazard to everyone on the road. Since 1984, the Cellular  
Telecommunications Industry Association and the wireless industry have  
conducted an educational outreach program to inform wireless phone  
users of their responsibilities as safe drivers and good citizens. As we  
approach a new century, more and more of us will take advantage of the  
benefits of wireless telephones. And, as we take to the roads, we all have a  
responsibility to drive safely.  
The wireless industry reminds you to use your phone safely when driving.  
Cellular Telecommunications & Internet Association For more information,  
please call 1-888-901-SAFE.  
For updates: http://www.ctia.org  
Appendix C: Consumer Update on Wireless  
Phones  
U.S. Food and Drug Administration  
1. What kinds of phones are the subject of this update?  
The term wireless phone refers here to hand-held wireless phones with  
built-in antennas, often called cell, mobile, or PCS phones. These types of  
wireless phones can expose the user to measurable radio frequency  
energy (RF) because of the short distance between the phone and the user  
s head. These RF exposures are limited by Federal Communications  
Commission safety guidelines that were developed with the advice of FDA  
and other federal health and safety agencies. When the phone is located at  
greater distances from the user, the exposure to RF is drastically lower  
because a person’s RF exposure decreases rapidly with increasing  
distance from the source. The so-called “cordless phones,” which have a  
base unit connected to the telephone wiring in a house, typically operate at  
far lower power levels, and thus produce RF exposures well within the  
FCC’s compliance limits.  
Health and Safety Information  
185  
 
2. Do wireless phones pose a health hazard?  
The available scientific evidence does not show that any health problems  
are associated with using wireless phones. There is no proof, however, that  
wireless phones are absolutely safe. Wireless phones emit low levels of  
radio frequency energy (RF) in the microwave range while being used.  
They also emit very low levels of RF when in the stand-by mode. Whereas  
high levels of RF can produce health effects (by heating tissue), exposure  
to low level RF that does not produce heating effects causes no known  
adverse health effects. Many studies of low level RF exposures have not  
found any biological effects. Some studies have suggested that some  
biological effects may occur, but such findings have not been confirmed by  
additional research. In some cases, other researchers have had difficulty in  
reproducing those studies, or in determining the reasons for inconsistent  
results.  
3. What is FDA’s role concerning the safety of wireless phones?  
Under the law, FDA does not review the safety of radiation emitting  
consumer products such as wireless phones before they can be sold, as it  
does with new drugs or medical devices. However, the agency has  
authority to take action if wireless phones are shown to emit radio  
frequency energy (RF) at a level that is hazardous to the user. In such a  
case, FDA could require the manufacturers of wireless phones to notify  
users of the health hazard and to repair, replace or recall the phones so  
that the hazard no longer exists.  
Although the existing scientific data do not justify FDA regulatory actions,  
FDA has urged the wireless phone industry to take a number of steps,  
including the following:  
Support needed research into possible biological effects of RF of the  
type emitted by wireless phones;  
Design wireless phones in a way that minimizes any RF exposure to the  
user that is not necessary for device function; and  
Health and Safety Information  
186  
Cooperate in providing users of wireless phones with the best possible  
information on possible effects of wireless phone use on human health  
FDA belongs to an interagency working group of the federal agencies that  
have responsibility for different aspects of RF safety to ensure coordinated  
efforts at the federal level. The following agencies belong to this working  
group:  
National Institute for Occupational Safety and Health  
Environmental Protection Agency Federal Communications Commission  
Occupational Safety and Health Administration  
National Telecommunications and Information Administration  
The National Institutes of Health participates in some interagency  
working group activities, as well.  
FDA shares regulatory responsibilities for wireless phones with the Federal  
Communications Commission (FCC). All phones that are sold in the United  
States must comply with FCC safety guidelines that limit RF exposure.  
FCC relies on FDA and other health agencies for safety questions about  
wireless phones.  
FCC also regulates the base stations that the wireless phone networks rely  
upon. While these base stations operate at higher power than do the  
wireless phones themselves, the RF exposures that people get from these  
base stations are typically thousands of times lower than those they can  
get from wireless phones. Base stations are thus not the primary subject of  
the safety questions discussed in this document.  
4. What is FDA doing to find out more about the possible health effects of  
wireless phone RF?  
FDA is working with the U.S. National Toxicology Program and with groups  
of investigators around the world to ensure that high priority animal studies  
Health and Safety Information  
187  
are conducted to address important questions about the effects of  
exposure to radio frequency energy (RF).  
FDA has been a leading participant in the World Health Organization  
International Electromagnetic Fields (EMF) Project since its inception in  
1996. An influential result of this work has been the development of a  
detailed agenda of research needs that has driven the establishment of  
new research programs around the world. The Project has also helped  
develop a series of public information documents on EMF issues.  
FDA and the Cellular Telecommunications & Internet Association (CTIA)  
have a formal Cooperative Research and Development Agreement  
(CRADA) to do research on wireless phone safety. FDA provides the  
scientific oversight, obtaining input from experts in government, industry,  
and academic organizations. CTIA-funded research is conducted through  
contracts to independent investigators. The initial research will include both  
laboratory studies and studies of wireless phone users. The CRADA will  
also include a broad assessment of additional research needs in the  
context of the latest research developments around the world.  
5. What steps can I take to reduce my exposure to radio frequency  
energy from my wireless phone?  
If there is a risk from these products—and at this point we do not know that  
there is—it is probably very small. But if you are concerned about avoiding  
even potential risks, you can take a few simple steps to minimize your  
exposure to radio frequency energy (RF). Since time is a key factor in how  
much exposure a person receives, reducing the amount of time spent using  
a wireless phone will reduce RF exposure.  
If you must conduct extended conversations by wireless phone every day,  
you could place more distance between your body and the source of the  
RF, since the exposure level drops off dramatically with distance. For  
example, you could use a headset and carry the wireless phone away from  
your body or use a wireless phone connected to a remote antenna  
Health and Safety Information  
188  
Again, the scientific data do not demonstrate that wireless phones are  
harmful. But if you are concerned about the RF exposure from these  
products, you can use measures like those described above to reduce your  
RF exposure from wireless phone use.  
6. What about children using wireless phones?  
The scientific evidence does not show a danger to users of wireless  
phones, including children and teenagers. If you want to take steps to lower  
exposure to radio frequency energy (RF), the measures described above  
would apply to children and teenagers using wireless phones. Reducing  
the time of wireless phone use and increasing the distance between the  
user and the RF source will reduce RF exposure.  
Some groups sponsored by other national governments have advised that  
children be discouraged from using wireless phones at all. For example,  
the government in the United Kingdom distributed leaflets containing such  
a recommendation in December 2000. They noted that no evidence exists  
that using a wireless phone causes brain tumors or other ill effects. Their  
recommendation to limit wireless phone use by children was strictly  
precautionary; it was not based on scientific evidence that any health  
hazard exists.  
7. Do hands-free kits for wireless phones reduce risks from exposure to  
RF emissions?  
Since there are no known risks from exposure to RF emissions from  
wireless phones, there is no reason to believe that hands-free kits reduce  
risks. Hands-free kits can be used with wireless phones for convenience  
and comfort. These systems reduce the absorption of RF energy in the  
head because the phone, which is the source of the RF emissions, will not  
be placed against the head. On the other hand, if the phone is mounted  
against the waist or other part of the body during use, then that part of the  
body will absorb more RF energy. Wireless phones marketed in the U.S.  
are required to meet safety requirements regardless of whether they are  
Health and Safety Information  
189  
used against the head or against the body. Either configuration should  
result in compliance with the safety limit.  
8. Do wireless phone accessories that claim to shield the head from RF  
radiation work?  
Since there are no known risks from exposure to RF emissions from  
wireless phones, there is no reason to believe that accessories that claim  
to shield the head from those emissions reduce risks. Some products that  
claim to shield the user from RF absorption use special phone cases, while  
others involve nothing more than a metallic accessory attached to the  
phone. Studies have shown that these products generally do not work as  
advertised. Unlike “hand-free” kits, these so-called “shields” may interfere  
with proper operation of the phone. The phone may be forced to boost its  
power to compensate, leading to an increase in RF absorption. In February  
2002, the Federal trade Commission (FTC) charged two companies that  
sold devices that claimed to protect wireless phone users from radiation  
with making false and unsubstantiated claims. According to FTC, these  
defendants lacked a reasonable basis to substantiate their claim.  
9. What about wireless phone interference with medical equipment?  
Radio frequency energy (RF) from wireless phones can interact with some  
electronic devices. For this reason, FDA helped develop a detailed test  
method to measure electromagnetic interference (EMI) of implanted  
cardiac pacemakers and defibrillators from wireless telephones. This test  
method is now part of a standard sponsored by the Association for the  
Advancement of Medical instrumentation (AAMI). The final draft, a joint  
effort by FDA, medical device manufacturers, and many other groups, was  
completed in late 2000. This standard will allow manufacturers to ensure  
that cardiac pacemakers and defibrillators are safe from wireless phone  
EMI.  
FDA has tested hearing aids for interference from handheld wireless  
phones and helped develop a voluntary standard sponsored by the  
Institute of Electrical and Electronic Engineers (IEEE). This standard  
Health and Safety Information  
190  
specifies test methods and performance requirements for hearing aids and  
wireless phones so that no interference occurs when a person uses a  
compatible phone and a compatible hearing aid at the same time. This  
standard was approved by the IEEE in 2000.  
FDA continues to monitor the use of wireless phones for possible  
interactions with other medical devices. Should harmful interference be  
found to occur, FDA will conduct testing to assess the interference and  
work to resolve the problem.  
10. What are the results of the research done already?  
The research done thus far has produced conflicting results, and many  
studies have suffered from flaws in their research methods. Animal  
experiments investigating the effects of radio frequency energy (RF)  
exposures characteristic of wireless phones have yielded conflicting results  
that often cannot be repeated in other laboratories. A few animal studies,  
however, have suggested that low levels of RF could accelerate the  
development of cancer in laboratory animals. However, many of the studies  
that showed increased tumor development used animals that had been  
genetically engineered or treated with cancer causing chemicals so as to  
be pre-disposed to develop cancer in the absence of RF exposure. Other  
studies exposed the animals to RF for up to 22 hours per day. These  
conditions are not similar to the conditions under which people use wireless  
phones, so we don’ t know with certainty what the results of such studies  
mean for human health.  
Three large epidemiology studies have been published since December  
2000. Between them, the studies investigated any possible association  
between the use of wireless phones and primary brain cancer, gioma,  
meningioma, or acoustic neuroma, tumors of the brain or salivary gland,  
leukemia, or other cancers. None of the studies demonstrated the  
existence of any harmful health effects from wireless phone RF exposures.  
However, none of the studies can answer questions about long-term  
Health and Safety Information  
191  
exposures, since the average period of phone use in these studies was  
around three years.  
11. What research is needed to decide whether RF exposure from wireless  
phones poses a health risk?  
A combination of laboratory studies and epidemiological studies of people  
actually using wireless phones would provide some of the data that are  
needed. Lifetime animal exposure studies could be completed in a few  
years. However, very large numbers of animals would be needed to  
provide reliable proof of a cancer promoting effect if one exists.  
Epidemiological studies can provide data that is directly applicable to  
human populations, but 10 or more years follow-up may be needed to  
provide answers about some health effects, such as cancer. This is  
because the interval between the time of exposure to a cancer-causing  
agent and the time tumors develop - if they do - may be many, many years.  
The interpretation of epidemiological studies is hampered by difficulties in  
measuring actual RF exposure during day-to-day use of wireless phones.  
Many factors affect this measurement, such as the angle at which the  
phone is held, or which model of phone is used.  
12. Which other federal agencies have responsibilities related to potential  
RF health effects?  
Additional information on the safety of RF exposures from various sources  
can be obtained from the following organizations.  
FCC RF Safety Program:  
http://www.fcc.gov/oet/rfsafety/  
Environmental Protection Agency (EPA):  
http://www.epa.gov/radiation/  
Occupational Safety and Health Administration’s (OSHA):  
http://www.osha-slc.gov/SLTC/radiofrequencyradiation/index.html  
Health and Safety Information  
192  
National Institute for Occupational Safety and Health (NIOSH):  
http://www.cdc.gov/niosh/topics.emf  
World health Organization (WHO):  
http://www.who.int/peh-emf/en  
International Commission on Non-Ionizing Radiation Protection:  
http://www.icnirp.de  
National Radiation Protection Board (UK):  
http://www.hpa.org.uk/radiation  
US Food and Drug Administration  
http://www.fda.gov/cellphones  
Health and Safety Information  
193  
STANDARD LIMITED WARRANTY  
What is Covered and For How Long? SAMSUNG ELECTRONICS  
CANADA INC. (SAMSUNG) warrants to the original purchaser  
(“Purchaser”) that SAMSUNG’s Phones and accessories (“Products”) are  
free from defects in material and workmanship under normal use and  
service for the period commencing upon the date of purchase and  
continuing for the following specified period of time after that date:  
Phone  
1 Year  
Batteries  
1 Year  
Leather Case/Pouch  
Holster  
90 Days  
90 Days  
1 Year  
Other Phone Accessories  
What is Not Covered? This Limited Warranty is conditioned upon proper  
use of Product by Purchaser. This Limited Warranty does not cover: (a)  
defects or damage resulting from accident, misuse, abuse, neglect,  
unusual physical, electrical or electromechanical stress, or modification of  
any part of Product, including antenna, or cosmetic damage; (b) equipment  
that has the serial number removed or made illegible; (c) any plastic  
surfaces or other externally exposed parts that are scratched or damaged  
due to normal use; (d) malfunctions resulting from the use of Product in  
conjunction with accessories, products, or ancillary/peripheral equipment  
not furnished or approved by SAMSUNG; (e) defects or damage from  
improper testing, operation, maintenance, installation, or adjustment; (f)  
installation, maintenance, and service of Product, or (g) Product used or  
purchased outside the United States or Canada.  
This Limited Warranty covers batteries only if battery capacity falls below  
80% of rated capacity or the battery leaks, and this Limited Warranty does  
STANDARD LIMITED WARRANTY  
194  
   
not cover any battery if (i) the battery has been charged by a battery  
charger not specified or approved by SAMSUNG for charging the battery,  
(ii) any of the seals on the battery are broken or show evidence of  
tampering, or (iii) the battery has been used in equipment other than the  
SAMSUNG phone for which it is specified.  
What are SAMSUNG’s Obligations? During the applicable warranty  
period, SAMSUNG will repair or replace, at SAMSUNG’s sole option,  
without charge to Purchaser, any defective component part of Product. To  
obtain service under this Limited Warranty, Purchaser must return Product  
to an authorized phone service facility in an adequate container for  
shipping, accompanied by Purchaser’s sales receipt or comparable  
substitute proof of sale showing the date of purchase, the serial number of  
Product and the sellers’ name and address. To obtain assistance on where  
to deliver the Product, call Samsung Customer Care at 1-800-SAMSUNG.  
Upon receipt, SAMSUNG will promptly repair or replace the defective  
Product. SAMSUNG may, at SAMSUNG’s sole option, use rebuilt,  
reconditioned, or new parts or components when repairing any Product or  
replace Product with a rebuilt, reconditioned or new Product. Repaired/  
replaced leather cases, pouches and holsters will be warranted for a period  
of ninety (90) days. All other repaired/replaced Product will be warranted  
for a period equal to the remainder of the original Limited Warranty on the  
original Product or for 90 days, whichever is longer. All replaced parts,  
components, boards and equipment shall become the property of  
SAMSUNG. If SAMSUNG determines that any Product is not covered by  
this Limited Warranty, Purchaser must pay all parts, shipping, and labor  
charges for the repair or return of such Product.  
What Are the Limits On SAMSUNG’s Liability? EXCEPT AS SET  
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN,  
PURCHASER TAKES THE PRODUCT “AS IS,” AND SAMSUNG MAKES  
NO WARRANTY OR REPRESENTATION AND THERE ARE NO  
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE,  
STANDARD LIMITED WARRANTY  
195  
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,  
INCLUDING BUT NOT LIMITED TO:  
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR  
ANY PARTICULAR PURPOSE OR USE;  
WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE  
PRODUCT;  
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS  
CONTAINED THEREIN; OR  
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF  
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING  
THERETO.  
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE  
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND  
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED  
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION  
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,  
ARE HEREBY LIMITED TO THE SAME DURATION OF TIME AS THE  
EXPRESS WRITTEN WARRANTY STATED HEREIN. SOME STATES/  
PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN  
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT  
APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR  
ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE,  
USE, OR MISUSE OF, OR INABILITY TO USE THE PRODUCT OR  
ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF  
USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS  
WARRANTY, INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL  
OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR  
BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT  
(INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT  
STANDARD LIMITED WARRANTY  
196  
COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR  
ANY BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT  
AGAINST PURCHASER BY ANY OTHER PARTY. SOME STATES/  
PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF  
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE  
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU  
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO  
STATE/PROVINCE TO PROVINCE. THIS LIMITED WARRANTY SHALL  
NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER  
OF THIS PRODUCT AND STATES PURCHASER’S EXCLUSIVE  
REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS HELD  
ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH  
PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT  
THE ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED  
WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL  
ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS  
LIMITED AS THE LAW PERMITS.  
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE  
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH  
THE PRODUCT. SAMSUNG MAKES NO WARRANTIES OR  
REPRESENTATIONS AND THERE ARE NO CONDITIONS, EXPRESS  
OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE QUALITY,  
CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF  
ANY THIRD-PARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH  
THIRD-PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE  
PRODUCT DISTRIBUTED BY SAMSUNG OR OTHERWISE, INCLUDING  
THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT  
WITH THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,  
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY  
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER  
STANDARD LIMITED WARRANTY  
197  
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH THIRD-  
PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.  
This Limited Warranty allocates risk of Product failure between Purchaser  
and SAMSUNG, and SAMSUNG’s Product pricing reflects this allocation of  
risk and the limitations of liability contained in this Limited Warranty. The  
agents, employees, distributors, and dealers of SAMSUNG are not  
authorized to make modifications to this Limited Warranty, or make  
additional warranties binding on SAMSUNG. Accordingly, additional  
statements such as dealer advertising or presentation, whether oral or  
written, do not constitute warranties by SAMSUNG and should not be relied  
upon.  
Samsung Electronics Canada, Inc.  
©2009 Samsung Electronics Canada, Inc. SAMSUNG is a registered  
trademark of Samsung Electronics Co., Ltd. and its related entities.  
No reproduction in whole or in part allowed without prior written approval.  
Specifications and availability subject to change without notice.  
STANDARD LIMITED WARRANTY  
198  
from contact list, 34  
international, 32  
making,  
Index  
redialing,3233  
waiting, 158  
Numerics  
123Sym Mode, 48  
Camcorder, 118  
Camera, 112  
Camera Options  
Settings, 114  
Timer, 114  
A
Airplane Mode, 8156  
Access Codes,  
Alarms, 130  
White Balance, 114  
Care and Maintenance, 177  
Characters, entering, 45  
Answer call, 35  
Audio, 104  
Charging battery,  
Clear Caches, 83  
Auto Redial, 158  
Communities, 111  
B
Connectivity  
Bluetooth, 159  
Backlight Time, 150  
Contacts, 59  
Battery  
add to Group, 67  
Copy from SIM Card, 69  
Copy to SIM Card, 69  
charging,  
installing, 6  
low indicator,  
precautions, 171  
D
Bluetooth  
Activation, 159  
Connectivity, 159  
Services, 161  
Date, 150  
Delete All, 102  
Delete Cookies, 84  
Display  
Bookmarks, 80  
Brightness, 149  
layout, 16  
Broadcast Message, 101  
Settings, 147  
Browser, 76  
Browser Profiles, 86  
E
Edit Photo, 117  
C
Emergency Call,  
Emergency Calls,2175  
Calculator, 138  
Calendar, 132  
Calibration  
EMO Mode, 48  
Emoticons, 46  
screen, 153  
Entering Text, 45  
Call Barring, 158  
Call Functions, 32  
Call Settings, 156  
Call Time, 39  
Call Waiting, 158  
Calls  
Exchange ActiveSync, 94  
Explosive Environments, 174  
F
Favorites, 68  
FCC Notice, 178  
FDN mode, 72  
answering, 35  
ending, 33  
Index  
199  
 
Field Entries, 22  
File transfer  
L
Language, 152  
Bluetooth, 56  
Light Settings, 147  
Lock Touch Screen,  
Mass Storage Mode, 55  
Media Player,  
microSD Card,5577  
USB cable, 54  
Low Battery Indicator,  
M
Fixed Dial Contacts, 72  
Font Type, 148  
Main menu, 20  
Friends, 93  
Maintenance,  
Making a Call,13727  
G
Manual Pause Dialing, 32  
Mass Storage Mode, 55  
Media menu,  
Games & Apps, 110  
Media Player,110232  
Memo, 137  
Get New  
Graphics,  
Ringtones,110074  
Memory Management  
Settings, 164  
Videos, 108  
Getting Started  
activating your phone,  
Graphics  
Memory Status, 73  
Media, 109  
Messages, 102  
get, 107  
Menu structure,16351  
Message Templates, 97  
Messages, 87  
Settings,  
Greeting Message, 149  
Groups, 66  
H
Missed Calls, 37  
MobileMail, 93, 144  
Multimedia Template, 97  
Multi-party Call,  
Handwriting Recognition, 51  
Health and Safety Information, 169  
History List, 84  
Multitask menu, 4233  
Music, 106  
Hold,  
Home,4175  
My Account, 74  
I
My Business Card, 71  
Icons, 17  
N
IM, 93, 143  
Image Viewer, 116  
Inbox, 91  
Network Profiles, 163  
Network Selection, 162  
New Contact  
Instant Messaging, 93  
International Call, 32  
Internet, 76  
in phone memory, 59  
in SIM card, 62  
Notifications widget, 30  
K
O
Keyboard, 45  
Keypad, 49  
On/off Switch,  
Operating Environment, 172  
Index  
200  
Other Files, 108  
Outbox, 91  
Tips, 183  
SAR  
Own Number, 71  
Information, 179  
Values, 180  
P
Screen calibration, 153  
Service Number, 70  
Settings  
Password,  
PC Studio software, 54  
Applications, 163  
Bluetooth, 159  
Call, 156  
Phone  
display, 16  
icons,  
layout,1172  
Call Barring,  
Call Waiting, 158  
Connectivity, 115588  
Display and Light,  
Network Selection,114672  
Phone,  
switching on/off,  
Phone Settings, 151  
Phone Status  
Settings, 165  
Photo  
Profiles,115415  
editing, 117  
Pictures, 107  
PIN,  
Time and Date, 150  
Widgets, 148  
PIN2,910  
SIM Card,  
SIM card installation,  
Playlists, 126  
Power Search tab, 64  
PUK,  
Solving Problems, 166  
Speakerphone, 42  
Specific Absorption Rate, 179  
Speed Dial, 34  
PUK2,910  
Push Message, 101  
Status  
Phone, 165  
R
Stop Watch, 141  
Swap calls, 41  
Radio Frequency Signals, 169  
Recent Calls,  
Record Audio,31629  
Recorded Audio, 106  
Redial, 158  
Switching on/off,  
T
T9 Mode, 47  
Tasks, 135  
Templates, 97  
Text  
Redialing manually,  
Remote SIM Control,33160  
Reset Phone, 155  
Responsible Use, 182  
Restore Phone, 156  
Ringtones  
Entering, 45  
Input Mode, 46  
Text Template,  
Time and Date, 91750  
Roaming, 110642  
get,  
Timer, 140  
Tip Calculator, 138  
Tones  
S
Safety  
alert tones, 145  
Information,  
Precautions,169  
Tools, 111  
Touch screen, 12  
Index  
201  
lock/unlock,  
Transfer Files to PC, 54  
Transferring Files  
Bluetooth, 56  
Mass Storage Mode, 55  
Media Player,  
microSD card,5577  
USB Cable, 54  
Transition Effect, 149  
Travel adapter,  
U
Unlocking the Phone, 15  
urMusic, 142  
V
Vibration Feedback, 152  
Videos, 107  
get, 108  
View Online Album, 107, 108  
Voice Call Forwarding, 157  
Voice Mail, 98  
Voice Recognition, 120  
Volume, 40  
W
Waiting call, 158  
Wallpaper, 147  
Warranty, 194  
Web Site  
access, 79  
Widget Bar, 24  
Widget tab, 12  
Widgets  
activating, 26  
adding and deleting, 26  
rearranging, 26  
Settings, 148  
undocking, 25  
World Clock, 139  
Y
Your Phone, 11, 20  
Index  
202  

UTStarcom CDM 8615 User Manual
U Line BI 95 User Manual
Toshiba DVD ROM DRIVE SD M1612 User Manual
StarTechcom SAT2510U2E User Manual
Star Candle Company VANGUARD 610000 User Manual
Sony RMO S551 User Manual
Pioneer DEH P6300 User Manual
Philips CDR880BK User Manual
Oregon Scientific RM383PA User Manual
Oregon Scientific RAR186 User Manual