StarTechcom SAT2510U2E User Manual

SAT2510U2E  
SAT2510BU2E  
Instruction Manual  
Serial ATA Hard Drive  
Enclosure  
2.5” eSATA/USB External Hard  
Drive Enclosure for Serial ATA  
Hard Drives  
Table of Contents  
Introduction..................................................................... 1  
Packaging Contents.....................................................................1  
System Requirements.................................................................1  
Installation....................................................................... 2  
Hardware Installation...................................................................3  
Driver Installation.........................................................................4  
Verifying Installation.....................................................................5  
How to Use ...................................................................... 5  
Specifications.................................................................. 7  
Technical Support........................................................... 8  
Warranty Information...................................................... 8  
i
Introduction  
This External Hard Drive Enclosure transforms most 2.5” SATA hard  
drives into a cost-effective portable storage solution . The 2.5” SATA  
hard drive enclosure connects to a host computer using USB 2.0  
or eSATA with support for data transfer rates of up to 3Gbps (using  
eSATA) or 480Mbps (through USB 2.0).  
Packaging Contents  
1 x SAT2510U2E or SAT2510BU2E enclosure  
1 x eSATA cable  
1 x USB cable  
1 x Driver CD  
1 x Instruction Manual  
System Requirements  
Available USB 2.0 or eSATA port on computer system  
Microsoft Windows® 2000/XP/Server 2003/Vista (32/64-bit),  
Mac OS® X, Linux®  
1
Installation  
Power  
connector  
eSATA  
USB Power/Activity  
LED  
WARNING: Hard drives require careful handling, especially when  
being transported. If you are not careful with your hard disk, lost data  
may result. Always handle your hard drive and storage device with  
caution.  
WARNING: Hard drives, like all computer equipment can also be  
severely damaged by static electricity. Be sure that you are properly  
grounded before opening your computer case or touching any  
components. StarTech.com recommends that you wear an anti-static  
strap when installing any computer equipment. If an antistatic strap  
is unavailable, discharge yourself of any static electricity build-up by  
touching a large grounded metal surface (such as the computer case)  
for several seconds.  
2
Hardware Installation  
1. Remove the screws from the enclosure, and remove the rear panel  
cover. Pull the front panel out of the enclosure:  
2. Attach the 2.5” SATA hard drive to the connector provided:  
3. Insert the front panel (with drive attached) into the rear panel  
(enclosure).  
3
4. Fasten the front panel (with drive attached) to the rear panel  
(enclosure), using the screws removed in step #1.  
5. To connect the hard drive enclosure to a host computer using USB,  
simply insert the included USB cable into the USB type Mini B slot  
provided by the enclosure, and the remaining end into an available  
USB type A slot on the host computer.  
6. To connect the hard drive enclosure to a host computer using  
eSATA, simply plug the included eSATA cable from the enclosure to  
the host computer. To provide power to the enclosure, connect the  
USB to DC cable (provided) to an available USB port on the host  
computer, and insert the remaining end into the power port located  
on the hard drive enclosure.  
Driver Installation  
Windows 2000/XP/Server 2003/Vista, Mac OS X, Linux  
No driver installation is required for these operating systems, as this  
enclosure is natively supported, so the drivers are already installed.  
4
Verifying Installation  
Windows 2000/XP/Server 2003/Vista  
From the main desktop, right-click on “My Computer” (“Computer” in  
Vista), then select Manage. In the new Computer Management window,  
select Device Manager from the left window panel.  
Double-click on the “Disk Drives” option. A new disk drive should be  
listed under this category. It will typically contain the make/model of  
the hard drive you have installed in the enclosure.  
How to Use  
Windows 2000/XP/Server 2003/Vista  
1. Right-click on My Computer, and select Manage.  
2. Select Disk Management, in the left pane. In the right pane, you  
should notice the new hard drive:  
5
3. Right-click on the Unallocated block, and select New Partition.  
4. This will launch the New Partition Wizard. Please follow the  
instruction provided by the Wizard, to partition the drive for use.  
5. Once the partition has been created, the drive installed within the  
hard drive enclosure will be recognized as a New Volume in Disk  
Management, as well as in My Computer:  
6
Specifications  
USB 2.0  
SATA 3Gb/s  
Bus Interface  
1 x USB mini B  
1 x eSATA port  
External Connectors  
1 x DC power connector  
JMircon JM20316  
1 x Power/Activity  
USB: 480 Mb/s  
eSATA: 3 Gb/s  
Chipset  
LEDs  
Maximum Data Transfer Rate  
Hard Drive Compatibility  
2.5” SATA 1.5 and 3 Gb/s hard  
drives, 9.5mm height  
Dimensions  
Weight  
133.0 mm x 72.0 mm x 13.0 mm  
90 g  
Compatible Operating  
Systems  
Windows 2000/XP/Server 2003/  
Vista, Mac OS X, Linux  
7
Technical Support  
StarTech.com’s lifetime technical support is an integral part of our  
commitment to provide industry-leading solutions. If you ever need  
our comprehensive selection of online tools, documentation, and  
downloads.  
Warranty Information  
This product is backed by a one year warranty.  
In addition, StarTech.com warrants its products against defects in  
materials and workmanship for the periods noted, following the initial  
date of purchase. During this period, the products may be returned  
for repair, or replacement with equivalent products at our discretion.  
The warranty covers parts and labor costs only. StarTech.com does  
not warrant its products from defects or damages arising from misuse,  
abuse, alteration, or normal wear and tear.  
Limitation of Liability  
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA  
LLP (or their officers, directors, employees or agents) for any damages  
(whether direct or indirect, special, punitive, incidental, consequential, or  
otherwise), loss of profits, loss of business, or any pecuniary loss, arising  
out of or related to the use of the product exceed the actual price paid  
for the product. Some states do not allow the exclusion or limitation of  
incidental or consequential damages. If such laws apply, the limitations  
or exclusions contained in this statement may not apply to you.  
8
StarTech.com has been making “hard-to-find easy” since 1985,  
providing high quality solutions to a diverse IT and A/V customer  
base that spans many channels, including government, education  
and industrial facilities to name just a few. We offer an unmatched  
selection of computer parts, cables, A/V products, KVM and Server  
Management solutions, serving a worldwide market through our  
locations in the United States, Canada, the United Kingdom and  
Taiwan.  
Visit www.startech.com today for complete information about all  
our products and to access exclusive interactive tools such as the  
Cable Finder, Parts Finder and the KVM Reference Guide.  

Teac HD 35 CRM User Manual
Sylvania SRCD4400 User Manual
Sony MZ R500DPC User Manual
SanDisk SDUFD2AA 512 User Manual
Samsung SGH x426m User Manual
Samsung SGH A256 User Manual
Samsung Juke Glyde User Manual
Pyramid Technologies TimeTrax EZ TTez User Manual
Pioneer DEH 1020E User Manual
Panasonic A100 User Manual