Verizon Wireless Juke
b y
P O R T A B L E
A l l D i g i t a l
M O B I L E P H O N E
S a m s u n g
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the
property of Samsung or its respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or software relating there to (the
“Phone System”), is proprietary to Samsung and protected under federal laws, state
laws, and international treaty provisions. Intellectual Property includes, but is not
limited to, inventions (patentable or unpatentable), patents, trade secrets,
copyrights, software, computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise violate the rights secured by
the Intellectual Property. Moreover, you agree that you will not (and will not attempt
to) modify, prepare derivative works of, reverse engineer, decompile, disassemble,
or otherwise attempt to create source code from the software. No title to or
ownership in the Intellectual Property is transferred to you. All applicable rights of
the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
Headquarters:
Customer Care Center:
1301 E. Lookout Drive
Richardson, TX 75082
1000 Klein St.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Internet Address: http://www.samsungusa.com
©
2007 Samsung Telecommunications America, LLC is a registered trademark of
Samsung Electronics America, Inc. and its related entities.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System
(Automated Response System) at:
www.samsungwireless.com/support
GH68-16013A
Printed in Korea
Table of Contents
Section 1: Getting Started ..........................................................................4
Understanding this User Manual ...............................................................................4
Notes and Tips ..........................................................................................................4
Turning Your Phone On and Off .................................................................................5
Setting Up Voicemail .................................................................................................5
Section 2: Understanding Your Phone .......................................................7
Features of Your Phone .............................................................................................7
Views of Your Phone .................................................................................................8
Command Keys ......................................................................................................13
Navigation Wheel ....................................................................................................14
Understanding the Main Screen ..............................................................................16
Battery ....................................................................................................................19
Phone Memory .......................................................................................................25
Section 3: Call Functions ..........................................................................26
Making a Call ..........................................................................................................26
Answering a Call .....................................................................................................27
Call In-progress Options .........................................................................................28
Recent Calls ...........................................................................................................29
Roaming .................................................................................................................32
TTY .........................................................................................................................33
Voice Commands ....................................................................................................34
Section 4: Menu Navigation .....................................................................43
Menu Navigation .....................................................................................................43
Navigation Wheel Shortcuts ....................................................................................44
Menu Outline ..........................................................................................................44
Section 5: Entering Text ...........................................................................50
Changing the Text Entry Mode ................................................................................50
Entering Text Using Word Mode ..............................................................................51
Entering Characters in Abc Mode ............................................................................52
Switching to Upper and Lower Case ........................................................................52
Entering Symbols ....................................................................................................52
Entering Numbers ...................................................................................................53
Section 6: Understanding Your Contacts .................................................54
Opening Contacts Menu ..........................................................................................54
Contacts Icons ........................................................................................................55
Adding a Contact ....................................................................................................56
Adding Pauses ........................................................................................................59
Contact Groups .......................................................................................................60
Finding a Contacts Entry .........................................................................................63
Editing an Existing Contact Entry .............................................................................63
Deleting a Contact Entry .........................................................................................64
1
Speed Dialing .........................................................................................................64
Emergency Contacts and Your In Case of Emergency List .......................................65
My Name Card ........................................................................................................66
Section 7: Messaging .............................................................................. 68
Types of Messages .................................................................................................68
Retrieving New Messages .......................................................................................68
Creating and Sending TXT Messages ......................................................................72
Creating and Sending Picture Messages .................................................................73
Message Folders .....................................................................................................75
Changing Message Settings ....................................................................................80
Voicemail ................................................................................................................81
Mobile IM ................................................................................................................81
Section 8: Changing Your Settings ......................................................... 82
Tools ......................................................................................................................82
Bluetooth Menu ......................................................................................................83
Sounds Settings ......................................................................................................86
Display Settings ......................................................................................................88
Phone Settings ........................................................................................................92
Call Settings .........................................................................................................101
Memory ................................................................................................................104
Phone Info ............................................................................................................104
Section 9: Music .................................................................................... 105
My Music ..............................................................................................................105
Music Player .........................................................................................................107
Music Player Options ............................................................................................110
Playlist ..................................................................................................................111
Deleting Songs from the Music Player ...................................................................113
Section 10: Get It Now ........................................................................... 115
Get It Now .............................................................................................................115
Tunes & Tones ......................................................................................................116
Pictures ................................................................................................................117
Games ..................................................................................................................120
Tools on the Go .....................................................................................................120
Extras ...................................................................................................................121
Section 11: Tools .................................................................................... 122
Voice Commands ..................................................................................................122
Calculator .............................................................................................................122
Calendar ...............................................................................................................124
Alarm Clock ..........................................................................................................126
Stop Watch ...........................................................................................................128
World Clock ..........................................................................................................129
Notepad ................................................................................................................129
Table of Contents
2
Section 12: Health and Safety Information ............................................131
Health and Safety Information ...............................................................................131
Samsung Mobile Products and Recycling ..............................................................133
UL Certified Travel Adapter ...................................................................................133
Consumer Information on Wireless Phones ...........................................................133
Road Safety ..........................................................................................................140
Responsible Listening ...........................................................................................141
Operating Environment .........................................................................................143
Using Your Phone Near Other Electronic Devices ...................................................143
Potentially Explosive Environments .......................................................................145
Emergency Calls ...................................................................................................145
FCC Notice and Cautions .......................................................................................146
Other Important Safety Information .......................................................................146
Product Performance ............................................................................................147
Availability of Various Features/Ring Tones ...........................................................148
Battery Standby and Talk Time .............................................................................148
Battery Precautions ..............................................................................................148
Care and Maintenance ..........................................................................................150
Section 13: Warranty Information ..........................................................151
Standard Limited Warranty ...................................................................................151
Index .........................................................................................................156
3
Understanding this User Manual
Section 1: Getting Started
Topics Covered
•
•
•
•
Understanding this User Manual
Notes and Tips
Turning Your Phone On and Off
Setting Up Voicemail
This section allows you to start using your phone by activating your service, setting
up your voicemail, contacting customer support, or getting an understanding of how
this manual is put together.
Understanding this User Manual
The chapters of this manual generally follow the same order as the menus and sub-
menus in your phone. A robust index for quick reference to most features begins on
page 156.
Also included is important safety information that you should know before using your
phone. Most of this information is near the back of the manual, beginning on page
131.
Notes and Tips
Throughout this manual are icons and text that are set apart from the rest. These are
intended to point out important information, quick methods for activating features, to
define terms, and more. The definitions for these methods are as follows:
• Notes: Explain alternative options within the current feature, menu, or sub-menu.
• Tips: Provide quick or innovative methods for performing functions related to the
subject at hand.
• Important: Points out important information about the current feature that could
affect performance, or even damage your phone.
Getting Started
4
Turning Your Phone On and Off
Turning Your Phone On
END
1. Open the swivel, then press
.
Note: As with any other radio-transmitting device, do not touch the internal antenna as it affects call quality
and may cause the phone to operate at a higher power level than is necessary. The internal antenna
is located along the top on the back side of your phone.
2. Once the phone finds a signal, the time, date, and day appear in the
display.
3. You’re now ready to place and receive calls.
Note: If the phone is outside the Verizon Wireless coverage area the roaming icon
appears in the top of
the display.
Turn Your Phone Off
END
ᮣ
Press
for two or more seconds. Your phone powers off.
Setting Up Voicemail
Voicemail allows callers to leave voice messages, which can be retrieved any time.
Note: Once your voicemail account has been set up, you can use the Voicemail selection 5 (under the
Messaging menu) to view details of voice messages in your voicemail box.
Voicemail Setup
1
8
6
sEND
1. Press and hold
or press
or dial your wireless
to interrupt (if
tuv
mno
phone number from any touch-tone phone.
2. When the recorded announcement begins, press
applicable)
3. An easy-to-follow setup tutorial will begin. Follow the instructions to set up
your new password and record a greeting.
5
Setting Up Voicemail
Listen to Voicemail
1
8
6
sEND
1. Press and hold
or press
or dial your wireless
tuv
mno
phone number from any touch-tone phone.
#
2. You are then prompted to enter your password followed by
key.
3. Follow the recorded prompts to listen to messages, change administrative
options, and so on.
Note: Airtime and long distance charges apply, IN Calling minutes do not apply to Voicemail setup or
retrievals.
Getting Started
6
Section 2: Understanding Your Phone
Topics Covered
•
•
•
•
•
•
Features of Your Phone
Views of Your Phone
Command Keys
Understanding the Main Screen
Battery
Phone Memory
This section outlines key features of your phone. It also displays the screen and the
icons that are displayed when the phone is in use.
Features of Your Phone
• Domestic and international voice and text messaging service (available on
participating networks).
• Global Positioning (GPS) Technology for VZ NavigatorSM and ChaperoneSM
• Personal Organizer (Calculator, Calendar, Alarm Clock, World Clock, Stop Watch,
and Notepad)
• Messaging Services (Standard TXT Messaging, Picture Messaging, and Mobile
Instant Messenger)
• Messaging Font Size selection
• VGA Camera with Night Shot mode
• Advanced Speech Recognition
• Speakerphone
• Music Player
• Bluetooth® Wireless Technology **
Note: The Juke supports the following Bluetooth profiles: A2DP, Headset, Handsfree, Serial Port, Object
Push for vCard, and Phonebook Access.The Juke does not support all Bluetooth OBEX profiles. Go to
www.verizonwireless.com/bluetoothchart to check car kit and accessory compatibility.
7
Views of Your Phone
Views of Your Phone
The following illustrations show the main elements of your phone:
How to Open and Close
While holding the closed phone with the Navigation wheel at the top, gently rotate
the top of the phone clockwise, revealing the keypad.
Closed position.
Rotate the Juke so that the
Navigation Wheel is on the top.
Rotate clockwise to open.
Rotate counter clockwise to
close.
Understanding Your Phone
8
Open View
1. Earpiece
16. Display*
2. Navigation
Wheel
15. Center Select
Key
3. Camera Key
4. Left Soft Key
5. Send Key
14. Right Soft Key
13. End/Power Key
12. CLR Key
6. Voicemail Key
7. Alpha-numeric Keys
11. Right Special
Function Key
8. Speakerphone
Key
9. Microphone
10. Voice Commands
Key
*Screen images simulated
Features
1. Earpiece: The earpiece allows you to hear the other caller.
2. Navigation Wheel: This key allows you to scroll through the phone menu
options. In the music player, you can rotate left or right to scroll through
songs.
9
Views of Your Phone
3. Camera Key: This key allows you to activate the camera.
4. Left Soft Key: This key is used to navigate through menus and applications
by selecting the choice indicated on the lower left area of the display
screen.
5. Send Key: Allows you to place or receive a call. Press the key once from
the main screen to access the recent call log.
6. Voicemail Key: Press and hold to dial Voicemail number.
7. Alpha-numeric Keys: Use these keys to enter numbers, letters, and
characters
8. Speakerphone Key: During a call, press and hold to activate the
speakerphone.
9. Microphone: The Microphone allows the other caller to hear you clearly
when you are speaking to them.
10. Voice Commands Key: Press and hold to activate VoiceSignal®.
11. Right Special Function Key: Press and hold to activate/deactivate Vibrate
mode. Also press to enter special characters and perform various
functions.
12. Clear Key: Deletes characters from the display when you are in text entry
mode. Press to return to the previous menu or screen when navigating
features on your phone.
13. End/Power Key: Ends a call. If you press and hold the END key, the power
goes On or Off. When you receive an incoming call, mute the ringer and
redirect the call to voicemail.
14. Right Soft Key: This key is used to navigate through menus and
applications by selecting the choice indicated on the lower right area of the
display screen.
15. Center Select Key: Pressing when navigating through a menu accepts the
highlighted choice in a menu.
16. Display: Displays all the information needed to operate your phone. The
display shows signal and battery strength, incoming calls, messages, time,
day, and date.
Understanding Your Phone 10
Closed View
1. Headset Jack
2. Power/
Accessory
Connector
3. Lock Key
5. Volume Key
4. Camera Lens
(located at rear)
My Music
Options
Because
Carol
00:09:48
00:20:30
11
Views of Your Phone
Features
1. Headset Jack: Allows you to plug in an optional headset for safe,
convenient conversations.
2. Power/Accessory Connector: The power/accessory interface connector
is used to plug in the charging accessories and also connect any available
accessory cables to your phone.
3. Lock Key: Locks the external keys when handset is closed and the lock
key is in locked position (with red showing).
4. Camera Lens: The lens of your built-in camera.
5. Volume Key: Allows you to adjust the master volume (with the swivel
open) or adjust the voice volume during a call. To mute the ringer during an
incoming call, press the volume key up or down. When the swivel is
closed, press and hold the volume key, to activate the sub LCD backlight.
With the swivel open, press and hold the volume down key to activate
Sound Off mode/Normal mode.
Understanding Your Phone 12
Command Keys
Functions for the soft keys are defined by what appears above each in the display.
There are two soft keys, the left soft key (
) and the right soft key (
).
Left Soft Key
Some functions of the left soft key are as follows.
• Press the Message (left) soft key to open the Message menu.
• When the left soft key function is Settings, press the Settings (left) soft key
to view settings for the feature.
• When the left soft key function is Edit, press the Edit (left) soft key
to edit a
Contact or Profile setting.
Right Soft Key
Some functions of the right soft key are as follows.
• Press the (right) soft key
Contacts to open your Contacts list.
• When the right soft key function is Options, press the Options (right) soft key
to view more options for the current menu.
Clear Key
CLR
The CLR key (
) is used to erase or clear numbers, text, or symbols from the
CLR
display. You can also use
screen from any menu.
to return to a previous menu or to return to the main
CLR
• If you enter an incorrect character, press
character.
to backspace (and delete) the
CLR
• To erase the previous word in a sentence, press and hold
.
CLR
• To back up one menu level, press
.
CLR
• To return to the main screen, press and hold
.
End/Power Key
END
The End/Power key (
) is used to end a call, to turn your phone on/off, to return
to the main screen from any menu or cancel the last input.
END
• Press and hold
to turn your phone off.
END
• Press
• Press
• Press
to turn your phone on.
END
END
to disconnect a call.
to return to the main screen from any menu, or to cancel the last input.
13
Navigation Wheel
Send Key
sEND
The Send key (
) is used to answer calls, dial calls, and to recall the last
number(s) dialed, received, or missed.
sEND
• Press
to answer calls.
sEND
• Enter a number and press
to make a call.
sEND
• Press
from the main to display a list of recent calls to and from your phone.
sEND
• Press
twice from the main to call the most recently dialed, received, or
missed number.
sEND
sEND
• Press
to pick up a waiting call. Press
again to switch back to the other
call.
Navigation Wheel
The Navigation wheel can be used to scroll through menu items. A highlighted menu
item may be selected by pressing the Center Select key (
).
Using the Navigation Wheel
Rotating or pressing the Navigation wheel in any direction allows you to scroll or
move through menus, sub-menus and options, all instructions in the User Manual
refers to this action as “Use the Navigation wheel.”
1. Use a circular motion to scroll through available onscreen options.
2. Use the Navigation wheel (
3. Press the direction point (top, bottom, left or right) of the Navigation wheel
) to navigate through menus, sub-menus and options when using
the phone feature.
Scrolling Down
) to scroll up or down through a list.
(
Scrolling Up
Understanding Your Phone 14
Opened Phone
Use the Navigation wheel to browse menus, sub-menus, and lists. Each navigation
direction point (up, down, left, right) acts as a shortcut from the main screen to
quickly access applications or menu items.
Camera Key
1. With the swivel open, press the Camera key (
) to activate the camera.
2. While in camera mode press the Camera key (
) or the Center Select
key (
Speakerphone Key
With the swivel open, press and hold the Speakerphone key (
) to take a photo.
) to switch from
using the earpiece to the speakerphone before or during a call. Use the volume keys
(located on the left side of your phone) to adjust the volume. Press and hold the
speakerphone key to disable the speakerphone option (switch back to using the
earpiece) during a call.
Note: With the swivel open or closed, after a call has ended the speakerphone function turns off
automatically.
Note: For safety information related to speakerphone use, see "Responsible Listening" on page 141.
15
Understanding the Main Screen
Understanding the Main Screen
With swivel open, the main screen display icons that
indicate network status, battery power, signal strength,
connection type and more.
Note: With the swivel open, the main screen will appear like the
illustration to the right. This is the default wallpaper and can be
changed. For more information, refer to "Wallpaper" on page
90.
The service indicator display line of the main screen
(above the word MENU) shows icons that indicate
feature and function status. The following list contains
icons that may appear in your display.
Display icons
1X Signal Strength: Indicates your phone is using the CDMA 1X
protocol. Appears when your phone is on and indicates the
current signal strength. More bars indicate a stronger signal.
D Signal Strength: Always appears when your phone is on and
indicates the current signal strength. More bars indicate a
stronger signal.
Standalone Mode: Appears when Standalone Mode is on. When
on, all RF functions for your phone are disabled, and you cannot
use your phone to place or receive calls.
Roaming: Your phone is outside your home area. While
roaming, another wireless provider may be handling your call.
The service rate for the call may be higher than those made
from within your home area. Please refer to Verizon Wireless for
roaming rates.
SSL: Indicates the secure socket layer is actively transmits your
communications over the internet in an encrypted format.
Voice Privacy: Prevents eavesdropping over a CDMA traffic
channel.
Understanding Your Phone 16
Phone Lock: Prevents external keys from being used when
phone is closed.
No service: Your phone cannot find a signal because you’re
outside a service area. You cannot make or receive calls. Wait
for a signal or move to an open area to find a signal. This
indicator always appears when you first turn on your phone and
disappears once service is located.
Voice Call: Indicates a call in progress. When dialing a number,
this icon flashes until the call connects.
Data Call: Indicates a data call in progress.
Dormant: Indicates no incoming or outgoing data.
Location E911 Only: Global Positioning Service (GPS) for 911 is
set to On for emergency calls only. When GPS for 911 is set to
On, the icon is displayed.
Location On: Global Positioning Service is set to On for location
and 911 calls.
Sync Music: Indicates that music is being synchronized
between your computer and your phone.
Paused: Indicates that music playback has been paused while
phone is open and incoming call is received.
Play: Indicates that music is playing in the background while
the phone is open.
Battery Level: More bars indicate a greater charge. When the
battery is low, an empty battery icon flashes and the phone
sounds an alert, which indicates your phone is about to shut
down.
TTY: Indicates that TTY is enabled.
Bluetooth On: Indicates that Bluetooth wireless technology is
turned on.
17
Understanding the Main Screen
Bluetooth Active: Indicates that Bluetooth wireless technology is
connected to another device and receiving or pushing data.
Bluetooth Connected: Indicates Bluetooth wireless technology is
turned on and is paired with another Bluetooth-enabled device.
Bottom Display Icons
Missed Calls: Your phone displays this icon when calls are
missed.
New Msgs: You’ve received a new text, or page. You’re also
notified of a new message by animations and sound. You have
one or more unread voicemail messages in your voicemail box.
(Only applicable on Verizon Wireless Network.)
Calendar Event: Your phone displays this icon when you have a
calendar appointment scheduled.
Voicemail: You’ve received a voicemail message, page or
message.
Alarm On: Indicates that your phone has a set alarm.
Auto Answer: Automatic answer is enabled. Your phone
automatically picks up calls after the designated time with your
headset connected.
All Sounds Off: The ringer is silenced for all alerts, incoming
calls, and incoming messages.
Alarm Only: Your phone will only ring when the set alarm
sounds.
Vibrate On: Your phone vibrates upon receiving a call.
Speakerphone: Indicates the speakerphone is active.
Understanding Your Phone 18
Dialogue boxes
Dialogue boxes prompt for action, inform you of status, or warn of situations such as
low memory. Dialogue boxes and their definitions are outlined below.
• Choice
• Example: “SAVE MESSAGE?”
• Reconfirm
• Example: “ERASE ALL MESSAGES?”
• Performing
• Example: “Sending...” “Connecting...”
• Completed
• Example: “MESSAGE SENT”
• Information
• Example: “New Message”
• Error
• Example: “System Error!”
• Warning
• Example: “BATTERY LOW,” “MEMORY FULL”
Battery
Note: This phone comes packaged with a partially charged, rechargeable standard Li-Ion battery, and
travel charger.
Important!: Although the phone can be used while the battery is charging, the battery must be fully
charged before first use, otherwise you could damage the battery.
19
Battery
Using A Non-Supported Battery
Samsung handsets do not support the use of a non-supported battery.
When using a non-supported battery you will hear a series of beeps and you will see
a warning message that indicates “NON SUPPORTED BATTERY SEE USER GUIDE”.
If you receive this warning, battery charging has been disabled.
Samsung charging accessories (i.e. travel adapter, and vehicle power adapter) will
only charge a Samsung approved battery. To continue use of your handset
press the Center Select key (
).
Note: When using a non-supported battery the handset can only be used for the duration of the life of the
battery and cannot be recharged.
Important!: Using a non-supported battery may cause damage to your phone. Use a Samsung supported
battery only.
Install the Battery
1. Insert the top end of the battery into the phone housing with the label side
down. The gold contacts on the end of the battery should match up with
those on the phone.
Understanding Your Phone 20
2. Push the bottom end of the battery down until it snaps securely into place
over the battery release latch.
Battery release
latch
Remove the Battery
END
1. Press
to turn off the phone (if on).
2. Press the battery release latch at the bottom of the phone. The bottom of
the battery should pop up.
Battery release
latch
21
Battery
3. Use your finger to lift the battery (bottom end first) up and away from the
phone.
Charge the Battery
Your phone is powered by a rechargeable standard Li-ion battery. Only use
Samsung-approved charging devices and batteries. Samsung accessories are
designed to maximize battery life. Using other accessories may invalidate your
warranty and may cause damage.
Travel Charger
The travel charger is a convenient, light-weight charger that rapidly charges your
phone from any 120/ 220 VAC outlet.
1. Plug the large end of the travel charger into a standard 120/220 VAC wall
outlet.
Understanding Your Phone 22
2. Slide the power/ accessory connector cover down.
Note: You can use your phone while charging, however, the battery charges faster if the phone is turned
off.
3. Insert the smaller end of the travel charger into the charger/ accessory
connector at the left side of the phone.
23
Battery
Note: The following illustration is the incorrect method for connecting the charger. If attempted, damage to
the accessory port occurs therefore voiding the phone’s warranty.
Incorrect
+
4. Plug the adapter into a standard AC wall outlet.
5. When you have completed the charging cycle, unplug the Travel Adapter
from the power outlet and then disconnect it from the phone.
Understanding Your Phone 24
Battery Indicator
The battery indicator
in the upper-right corner of the display indicates battery
indicates an
almost empty battery. Two to three minutes before the battery becomes too low to
operate, a blinking empty battery icon appears and a tone sounds. If you
power level. Four bars indicate a full charge, while an empty icon
continue to operate the phone without charging, it shuts down.
Phone Memory
The following file types can be saved to the phone memory:
Note: Up to 22MB of memory is available for storing the file types listed below and downloaded
applications.
• My Pictures: Pictures you have saved from a Picture message, downloaded via
the “Get It Now” application, or taken using your phone.
• My Sounds: Sounds recorded using your phone, or saved from a Picture message
with sound attached.
• My Ringtones: Ringtones you have downloaded via the “Get It Now” application.
Music Memory
A separate storage space of up to 2GB* is available for storing music files (.mp3,
.wma, wma pro, aac, and .aac+ format files) on your phone for playback using the
Music Player.
*Actual formatted capacity is less.
25
Making a Call
Section 3: Call Functions
Topics Covered
•
•
•
•
•
•
•
Making a Call
Answering a Call
Call In-progress Options
Recent Calls
Roaming
TTY
Voice Commands
This section describes how to make or answer a call with the phone open. It also
includes the features and functionality associated with making or answering a call.
Making a Call
1. From the main screen, enter the number you want to call using the keypad.
sEND
2. Press
.
Making Calls Using Contacts
Contacts are entries that you create to store names, numbers, and other information
for people or groups of interest. If you’ve already entered information into your
Contacts list, you can recall and dial the contact easily. For more information, refer
to "Adding a Contact" on page 56.
1. From the main screen, press the right soft key
Contacts.
2. Use the Navigation wheel to highlight the contact you want to call.
Tip: Use the GoTo field to quickly access a contacts name. Simply, press the keys associated with contacts
name and the name(s) associated with keys pressed will appear in the display.
3. When the desired contact is highlighted, press the Center Select key
(
) VIEW. Details for the contact appear in the display.
Call Functions 26
4. If the entry contains more than one number, use the Navigation wheel to
highlight the desired number.
sEND
5. Press
to call the number.
Answering a Call
To answer a call by opening the phone's swivel, the Answer Option should be set to
Swivel Open. This is the default option.
If the swivel is already open when the call is received:
sEND
• Press the
key to answer the call.
• Press the right soft key
• Press the left soft key
Ignore to redirect the call immediately to voicemail.
Quiet to silence the ringer.
To receive a call with the phone closed, the phone’s Answer Option must be set to
either: Any Key or Auto w/ Handsfree.
Note: Any Key only works as described when phone is open.
END
• Any Key: Calls are answered when any key is pressed except
. If you
END
press
it will ignore the call and send it to voicemail.
• Auto w/ Handsfree: Calls are answered automatically with a 5 second delay.
If the swivel is closed when the call is received, use your Navigation wheel to select
one of the following options and then press the Center Select key (
• Quiet to silence the ringer.
):
• Ignore to redirect the call immediately to voicemail.
• Answer (Speaker) to answer the incoming call. If the Auto w/Handsfree option is
enabled, these incoming calls are automatically answered within 5 seconds.
Note: To change the answer options, see "Answer Options" on page 101.
Answering Call-Waiting Calls
When you receive a call while on a call:
sEND
• Press
and answer the new call and place your current call on hold or let the
new call go to your voicemail.
sEND
• Press
to return to your original call when you finish with an incoming call.
27
Call In-progress Options
Call In-progress Options
Access numerous menus and features while in a call.
Note: If the call is disconnected while accessing the Call In-progress Option, the Options menu disappears
from the display and the phone eventually returns to the main screen.
1. While in a call, press the right soft key
Options. The following menu
items appear in the display.
• Messaging: Open the Messages menu.
• Contact List: Open the contacts to view.
• Recent Calls: Displays your recent incoming, missed and outgoing calls.
• Bluetooth Menu: Displays the Bluetooth Menu so you can easily connect to a
Bluetooth device while on a call.
• Audio To Phone/Device: Allows you to switch the audio path from Device to
Phone or Phone to Device using Bluetooth.
• Main Menu: Opens the main menu.
• Notepad: Allows you to type in and save a note while on a call.
• Voice Record: Records the caller's conversation.
Note: Recording a call may require consent from the person being recorded. User should determine
applicable law and take appropriate steps to comply.
• Whisper Mode: During a call, you can set Whisper Mode to ON to help the
person receiving your call hear you better if you must speak softly. After the call
ends, Whisper Mode will be reset to OFF.
2. Use the Navigation wheel to highlight a menu. Press the Center Select key
(
) to open the highlighted menu or to activate the feature.
3. Press the left soft key
Mute/Unmute to mute the call. Press again to
unmute the call.
Call Functions 28
Recent Calls
When you place, miss, or receive a call, a record of the call is saved in Recent Calls,
which is a listing of the different types of calls you either made or received. These
types of calls are listed below.
• Missed: Displays any missed calls.
• Received: Displays any received calls that were answered.
• Dialed: Displays all outgoing calls made from your phone.
• Blocked: Displays blocked incoming and outgoing calls. The Blocked call log can
only be accessed by entering the Phone Lock Code. The default Phone Lock Code
is the last four digits of your telephone number. For more information, refer to
"Restrict Calls" on page 96.
Note: The Blocked call log only displays if Call Restrictions are set to Contacts Only, or Block All.
• All: Displays all missed, received, and outgoing calls made from your phone.
Call History Icons
When you view Recent Calls, an icon to the left of the number indicates the type of
call.
Indicates a Missed call
Indicates a Dialed call
Indicates a Received call
Viewing Call Information
Recent Calls retains information such as the duration, date and time, and whether
the call was received, dialed, or missed.
sEND
1. From the main screen, press the
key or press the Center Select key
(
) MENU then use the Navigation wheel to highlight Recent Calls
and press the Center Select key ( ). Use the Navigation wheel to
highlight the call log category that contains the number you want to view
and press the Center Select key ( ).
2. Use the Navigation wheel to highlight the desired number.
29
Recent Calls
3. Once the desired number is highlighted, press the Center Select key (
)
OPEN.
4. The following options appear in the display:
• Call Type: The title bar displays if the call is a missed, dialed, or received.
• Name: If the caller is in your Contacts list, their name is listed here as well as the
appropriate icon to indicate mobile, work, or home number. This information only
appears if the caller is in your Contacts list.
• Number: Displays the telephone number.
• Time: The time of the call.
• Date: The date of the call.
• Duration: The duration of the calls made or received.
5. Press the right soft key
Options to display the following options:
• Details: Shows details of the entry in your Contacts list associated with the
phone number.
• Save: Save the number to your Contacts list.
Note: If Save doesn't appear, that entry is already in your Contacts list.
• Erase: Delete the call from Call History.
• Lock/Unlock: Locks or unlocks the entry to prevent accidental deletion.
• View Timers: Select to view the call timers for your phone.
6. Use the Navigation wheel to highlight an option and press the Center
Select key (
) to enter the highlighted option’s sub-menu.
Making Calls Using Call History
sEND
1. From the main screen, press
highlight desired number.
sEND
then use the Navigation wheel to
2. Press
to call the highlighted number. Or, you can press the Center
sEND
Select key (
) OPEN, then press
to call the highlighted number.
Call Functions 30
Creating or Updating Contacts Using Call History
sEND
1. From the main screen, press
then Use the Navigation wheel to scroll
to highlight desired number.
2. Press the right soft key
Options.
3. Save is highlighted, press the Center Select key (
4. Use the Navigation wheel to highlight Add New Contact or Update
Existing. Press the Center Select key ( ). If you selected Update
Existing, use the Navigation wheel to highlight the appropriate contact and
press the Center Select key ( ).
5. Use the Navigation wheel to highlight one of the following options and
).
press the Center Select key (
). The number will be entered into that
option:
•
•
•
•
•
Mobile 1
Mobile 2
Home
Work
Fax
6. Enter a name for the entry using the keypad. Press the left soft key
Abc if you wish to select a different method of text entry, such as Word,
Abc, ABC, 123, or Symbols.
7. To assign a Speed Dial location, use the Navigation wheel to highlight the
phone number you would like to assign to a Speed Dial location and press
the right soft key
Options.
1
Press
Set Speed Dial or press the Center Select key (
).
Highlight an unassigned location and press the Center Select key (
)
SET. A confirmation message appears in the display, Yes is highlighted,
press the Center Select key (
) to add Contact to the speed dial
location.
Note: Voicemail is assigned to Speed Dial location 1.
You can assign a speed dial location to each phone number associated with the contact (Home,
Work, Mobile 1, Mobile 2, and Fax).
8. When you’re finished entering information for the entry, press the Center
Select key ( ) SAVE. The entry is saved to your Contacts.
31
Roaming
Delete Call History Entries
sEND
1. From the main screen, press
then use the Navigation wheel to
highlight desired number.
2. Press the right soft key
Options. A pop-up menu appears in the
display.
3. Use the Navigation wheel to highlight Erase and press the Center Select
key ( ). Select Yes or No at the ERASE ENTRY? pop-up screen.
4. Press the Center Select key ( ).
Delete All Call History Entries
sEND
1. From the main screen, press
.
2. Press the right soft key
Options. A pop-up menu appears in the
display.
3. Use the Navigation wheel to highlight Erase All and press the Center
Select key (
). Select Yes or No at the ERASE ALL ENTRIES? pop-up
screen.
4. Press the Center Select key (
Roaming
What is Roaming?
).
Your phone can roam on other digital networks. Roaming occurs when you travel
outside a pre-designated coverage area. The roaming icon displays when roaming is
active and extra charges may apply when making or receiving calls.
Note: Some features may be unavailable while roaming.
Roaming Options
The following roaming options may appear in the display:
• Home Only: Your phone is available for normal operation only in the designated
coverage area.
• Automatic, Automatic A or Automatic B: The preferred roaming list is used to
acquire service. (At least one of these options may appear in the display)
Note: Contact your service provider for information regarding preferred systems.
Automatic settings are determined by the home location of the phone and the user’s price plan.
To change your Roaming option, follow these steps:
Call Functions 32
1. From the main screen, press the Center Select key (
) MENU.
and then
2. Use the Navigation wheel to highlight Settings & Tools
press the Center Select key (
).
5
jkl
3. Press
Phone Settings.
7
4. Press
System Select.
pqrs
5. Use the Navigation wheel to choose a setting, and press the Center Select
key ( ).
TTY
Your phone is fully TTY compatible. Connect the TTY equipment to the headset jack,
located on the right side of the phone. Before you can use your phone with a TTY
device, you’ll need to enable TTY functions in the phone.
1. From the main screen, press the Center Select key (
) MENU.
and then
2. Use the Navigation wheel to highlight Settings & Tools
press the Center Select key (
).
6
mno
3. Press
Call Settings.
3
4. Press
TTY Mode. The TTY Mode screen displays.
def
5. A warning appears in the display stating “ENABLING TTY WILL DISABLE
HEADSET AUDIO. CONTINUE?”
Use the Navigation wheel to highlight Yes and press the Center Select key
(
) to proceed to TTY MODE screen.
Use the Navigation wheel to highlight No and press the Center Select key
) to return to Call Settings menu.
6. Use the Navigation wheel to select one of the following and press the
(
Center Select key (
) to make your selection:
• TTY Full
• TTY + Talk (VCO)
• TTY + Hear (HCO)
• TTY Off
7. The TTY MODE SET screen displays.
33
Voice Commands
Voice Commands
VoiceSignal™ is an advanced speech recognition software that can be used to
activate voice commands for a wide variety of functions on your phone. VoiceSignal
software automatically voice activates all contacts for voice dialing and finding
contacts. No pre-recording or training is needed. Speak phone numbers naturally to
dial, and use voice commands to navigate phone menus. Names should be spoken
exactly as they are spelled in the contact list.
Voice Commands Settings
You can adjust the settings and preferences for Voice Commands by opening the
Voice Commands menu. Using this menu, you can change the following Voice
Command features:
• Name Dialing: You can place a call to any name and phone location in your contact
list.
• Menu Shortcuts: You can use a single command to access certain menu items.
To access the Voice Commands settings menu, follow these steps:
1. From the Main screen, press the Center Select key (
) MENU.
and then
2. Use the Navigation wheel to highlight Settings & Tools
press the Center Select key (
).
5
jkl
3. Press
Phone Settings.
3
4. Press
Voice Commands.
def
5. Use the Navigation wheel to select the setting you want to change. The
following options are available:
• Voice Dial: Select from the following:
0
-
Voice Key Only: Initiate voice commands by pressing the
key.
key, or by
-
Voice Key/EarMic: Initiate voice commands by pressing the
speaking into a headset.
Voice Key/Flip: Initiate voice commands by pressing the
the handset.
0
0
-
key, or by opening
• Voice Settings:
• Choice List: If Voice Commands is not absolutely confident that it has correctly
identified a name or number, it can display a choice list of up to three
possibilities, and prompt you to confirm the correct one. You can control when
choice lists appear by changing the Choice Lists setting to the following:
-
Automatic: Voice Commands displays a choice list when it is not confident it
has identified the correct choice from among multiple alternatives.
Always On: When there are multiple alternatives, VoiceSignal always displays
a choice list.
-
Call Functions 34
-
Always Off: Voice Commands never displays a choice list. Instead, the
application picks the best from among the possible choices.
• Sensitivity: In Voice Commands, sensitivity controls the balance between
rejecting too much, which means the phone frequently does not recognize
names, numbers, or commands, and rejecting too little, which means it
frequently recognizes something even if nothing was said. When Voice
Commands rejects an utterance, it displays a message such as “Please
repeat…” or “No match found.” If you frequently experience these messages,
you might be able to get better recognition by adjusting the Sensitivity setting
toward Reject Less. If you frequently experience false activations (Voice
Commands detects a wrong match), you might be able to get better
performance by adjusting the Sensitivity setting toward Reject More.
• Digit Dialing: Use the dialing Digit Dialing menu to adapt digit dialing to your
voice.
-
Adapt Digits: Lets you adapt digits, which can improve speech recognition of
phone numbers. Adaptation takes about 180 seconds.
Reset Digits: Erases any digit adaptation you have done and resets digit
recognition to the factory default. If you have not adapted digits, this option is
grayed out.
-
• Sound: You can customize the VoiceSignal user interface by turning playback
on or off for prompts, names, and numbers.
-
Prompts: Turns audio prompts playback (i.e. “Say a name or shortcut”) on or
off.
-
Digits: Turns playback on or off for digits, for example, when confirming a
phone number.
-
-
-
Names: Turns name playback on or off.
Name Settings: Adjusts the speed and volume of name playback.
Speakerphone: Plays the prompts through the speaker.
• About: Displays information about Voice Commands including version number,
build number, and device model.
• Digit Dial Readout: Reads out the numbers pressed when dialing a phone
number.
• Call Alert: Provides audible readout of the phone number and/or name (if in your
contact list) of an incoming call.
You can also access the Voice Commands Settings menu by
following these steps:
0
1. Press and hold the Voice Commands key (
2. Press the right soft key for Settings.
3. Use the Navigation wheel to select the setting you want to change.
).
35
Voice Commands
Adapting Voice Commands
Voice dialing works well for most people without special adaptation. However,
people with strong accents or unique voice characteristics may receive better results
after adapting the system to match their voices.
You should adapt Digit Dial only if the system is frequently unable to recognize your
speech. After you adapt Digit Dial, your phone is customized to your voice, and your
voice only. Others will not be able to use it unless they reset the phone to factory
defaults.
Adaptation involves recording several digit sequences to adapt the system to the
unique properties of your voice. The adaptation process takes about three minutes.
Tips for adapting Digit Dial
• Adapt digits in a quiet place.
• Make sure you wait for the beep before starting to speak.
• Speak clearly, and say each digit distinctly.
• If you make a mistake while recording a sequence of digits, or if there is an
unexpected noise that spoils the recording, re-record that sequence.
• Only adapt digits if you regularly have problems with digit dialing. Once adapted,
digit dialing will not work as well for other people using your phone.
• Adapt Digit Dial to your voice.
Digit Dial Adaptation
To access the Adapt Digits menu, follow these steps:
1. From the main screen, press the Center Select key (
) MENU.
and then
2. Use the Navigation wheel to highlight Settings & Tools
press the Center Select key (
).
5
3
jkl
def
3. Press
Phone Settings, then
Voice Commands.
Digit Dialing.
3
2
4. Press
Voice Settings, then
def
abc
1
5. Adapt Digits is highlighted. Press
6. A short description of the Adapt Digits displays.
7. Read the description until you are comfortable to proceed, then press the
Center Select key ( ).
or Center Select key (
).
8. Your phone displays the first digit sequence and “Please say” plays
through the speakerphone followed by the four digits appearing in the
display.
Wait for the beep and repeat the digits using your normal tone of voice.
Call Functions 36
9. After a moment, the phone plays back the recording and prompts “Did the
recording sound ok?” If the recording was good, say “Yes.” If you need to
re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the digits again. Wait
for the beep and then re-record. Repeat this step until you’re satisfied with
the recording.
10. After confirming that the recording sounds ok, repeat the recording
process with the next set of digits. After ten sets of digits, the phone
indicates that adaptation is complete.
Reset Digit Dial Adaptation
This option erases an adaptation and resets Digit Dial to its original state.
1. From the main screen, press the Center Select key (
) MENU.
and then
2. Use the Navigation wheel to highlight Settings & Tools
press the Center Select key (
).
1
1
3. Press
Tools, then
Voice Commands.
3
4. Press the right soft key
Settings, then
Digit Dialing.
def
2
5. Highlight
Reset Digits and press the Center Select key (
). The
abc
Reset Digit Adaptation screen displays requesting confirmation of reset.
Note: If you have not performed the Adapt Digits function, the Reset Digits option will not be accessible.
6. Press Center Select key (
) to proceed. Digit Adaptation Reset is
completed.
37
Voice Commands
VoiceSignal Commands
The following is a list of functions that you can perform using VoiceSignal speech
recognition on your phone.
• Call <Name or #>: Dial by saying a Name in your
Contacts List or a Name and a Location (home,
work, mobile).
• Send <Msg Type>: Send a text or picture message
to a number or to someone in your Contacts List.
• Lookup <Name>: Open the contact record for any
name in your Contacts List.
• Play <Playlist>: If the exact name of a playlist
(saved in My Music) is spoken, the song in that
playlist will begin to play. Otherwise, you will be
prompted to play All Songs or the names of
playlists saved in My Music.
• Go To <Menu>: Opens the specified Main Menu
item.
• Check <Item>: Provides details of your phone status, voicemail, messages,
missed calls, time, battery level, signal strength and master volume level.
• Help Guide: Provides a helpful tutorial on how to use VoiceSignal.
Call Functions 38
Call Name Dialing: Contact Name
To use Name Dial, you’ll need to have entries stored in your Contacts list. For more
information, refer to "Adding a Contact" on page 56.
0
1. From the main screen, press and hold the Voice Commands key (
).
2. After a brief pause, a list of optional commands appears in the display and
the audio prompt “Please say a command” plays through the
speakerphone.
3. Say “Call” at a distance of 3-12 inches from the phone in a natural voice.
4. “Please say the Name, Number, Voicemail or Last Number” plays through
the speakerphone.
5. To use Name Dialing, say the name of the contact that you want to dial.
6. The name that you said is repeated through the speakerphone and your
phone dials the number (or prompts you to select which number to dial if
more than one phone number is stored for that contact).
7. If VoiceSignal is not sure of the name that you said, a list of possible
matches appears in the display.
8. You’re asked to confirm the correct name as VoiceSignal displays the
results. Say “Yes” or “No” to confirm or reject the number when prompted.
9. VoiceSignal repeats the number that you selected and dials that number.
Send Text Msg: New Message
0
1. From the main screen, press and hold the Voice Commands key (
).
2. A list of commands appears in the display and the audio prompt "Please
say a command" plays through the speakerphone.
3. Say “Send Text” or "Send Picture" at a distance of 3-12 inches from the
microphone.
4. “Please say the name or number” plays through the speakerphone. Say a
phone number or a contact name exactly as it is displayed in your Contacts
list.
5. The NEW TXT MSG screen or NEW PICTURE MSG screen will appear in the
display with the To field filled in with the contact name or number that you
specified.
6. To complete the message, refer to Step 5 in see "Creating and Sending
TXT Messages" on page 72 or see "Creating and Sending Picture
Messages" on page 73.
39
Voice Commands
Name Lookup: Contact List
To perform a name lookup, you’ll need to have some entries in your Contacts list.
0
1. From the main screen, press and hold the Voice Commands key (
).
2. A list of commands appears in the display and the audio prompt “Please
say a command” plays through the speakerphone.
3. Say “Lookup” at a distance of 3-12 inches from the microphone. “Please
say the name” plays through the speakerphone.
4. Say the name exactly as it is displayed in your Contacts list.
5. The contact name appears in the display with other information that you’ve
entered for that contact.
Play <Playlist name>
Play
Play allows you to choose from the following selections.
• All Songs: Allows you to play all songs on your handset. If all your music is stored
on a microSD card it must be inserted to use this function.
• Playlist: Allows you to play a playlist.
0
1. From the main screen, press and hold the Voice Commands key (
).
2. A list of commands appears in the display and the audio prompt "Please
say a command" plays through the earpiece or speakerphone.
• Say “Play” or “Play All Songs” at a distance of 3-12 inches from the
microphone to begin playing all songs.
• Say the “Play <Playlist Name>” at a distance of 3-12 inches from the
microphone to begin playing a Playlist saved on your Music Player.
Note: The playlist name must be spoken exactly as saved in Music Player.
3. “Please Choose” plays through the earpiece or speakerphone.
4. Say “All Songs” to play all songs in your music player, say a playlist name
to play that playlist.
5. You will be prompted to “CLOSE PHONE TO CONTINE”.
6. The selected song(s) will begin playing once the phone is closed.
Call Functions 40
Opening Menus
To begin navigation of menu items on your phone using VoiceSignal perform the
following.
0
1. From the main screen, press and hold the Voice Commands key (
).
2. A list of commands appears in the display and the audio prompt “Please
say a command” plays through the speakerphone.
3. To begin navigation of menu items, say “Go To” at a distance of 3-12
inches from the microphone. The main menu list displays and a prompt of
“Please choose” plays through the speakerphone.
4. Select one of the following menus:
• Music
• Get It Now
• Messaging
• Contacts
• Recent Calls
• Settings & Tools
5. The menu option spoken opens.
Checking Phone Status
0
1. From the main screen, press and hold the Voice Commands key (
).
2. A list of commands appears in the display and the audio prompt "Please
say a command" plays through the speakerphone.
3. Say “Check” at a distance of 3-12 inches from the microphone. “Please
choose” plays through the speakerphone. Say one of the following
commands:
• "Status" — Displays and announces all of the available status indicators in
sequence.
• "Voicemail" — Displays the number of new voicemail messages.
• "Messages" — Displays and announces the number of new voicemail, TXT,
and Picture messages.
• "Missed Calls" — Displays the missed call log.
• "Time" — Displays and announces the current time.
• "Battery" — Displays and announces the current battery level.
• "Signal Strength" — Displays and announces the current 1x signal strength
levels.
• "Volume" — Displays and announces the current master volume setting.
END
4. After viewing or hearing the requested information, press
to return to
the main screen.
41
Voice Commands
Help Guide
Provides helpful information on how to use VoiceSignal.
0
1. From the main screen, press the Voice Commands key (
).
2. A list of commands appears in the display and the audio prompt “Please
say a command” plays through the speakerphone.
3. Say "Help Guide" at a distance of 3-12 inches from the phone in a natural
voice.
4. The tutorial appears in the display. Use the Navigation wheel to page down
and read the guide.
5. Press the Center Select key (
) to return to the Voice Commands
END
screen, or press
to return to the main screen.
Call Functions 42
Section 4: Menu Navigation
Topics Covered
•
•
•
Menu Navigation
Navigation Wheel Shortcuts
Menu Outline
This section explains the menu navigation for your phone. It also includes an outline
of all the available menus associated with your phone.
Menu Navigation
Access menus using the Navigation wheel, two soft keys
shortcut.
, or use a
1. Press the Center Select key (
) MENU. The first of several menus
appear in the display.
2. Use the Navigation wheel to browse phone menus.
3. Press the Center Select key (
) to enter the menu or sub-menu
presently appearing in the display.
Return to the Previous Menu
CLR
Press
to return to the previous menu.
Navigate Using Shortcuts
You can also access menus and sub-menus using menu numbers. This method is
often called a “shortcut.” To shortcut to a menu or sub-menu, press the Center
Select key (
) MENU, then enter the menu and/or sub-menu number(s) for the
feature in question. For more information, refer to "Navigation Wheel Shortcuts" on
page 44.
1. From the main screen, press the Center Select key (
) MENU.
2
2. Press the number of the menu you want to access. Example, press
abc
for Get It Now.
43
Navigation Wheel Shortcuts
Navigation Wheel Shortcuts
Use the Navigation wheel (as illustrated below) to launch it’s corresponding
application.
NEW TXT MESSAGE
PICTURES
GET IT NOW
CALENDAR
Each Navigation wheel location may be customized to select other functions. For more information, refer to
"Set Shortcut Keys" on page 92.
1. From the main screen press the Center Select key (
) MENU.
and press the
2. Use the Navigation wheel to highlight Settings & Tools
Center Select key (
).
5
3. Press
Phone Settings.
jkl
2
4. Press
Set Shortcut Keys.
abc
5. Use the Navigation wheel to select which shortcut key you want to change
and press the Center Select key ( ).
6. Use the Navigation wheel to highlight the desired function for the shortcut
and press the Center Select key ( ) to save your selection.
Menu Outline
The following list shows the menu structure and indicates the number assigned to
each option.
Music
1: My Music
2: Sync Music
Menu Navigation 44
GET IT NOW
1: Tunes & Tones
1: Get New Ringtones
1: Get New Applications
2: My Ringtones
1: Get New Ringtones
3: My Sounds
1: Record New
2: Pictures
1: Get New Pictures
1: Get New Applications
2: My Pictures
3: Take Picture
3: Games
1: Get New Applications
4: Tools on the Go
1: Get New Applications
5: Extras
1: Get New Applications
MESSAGING
1: New Message
1: TXT Message
2: Picture Message
2: Inbox
3: Sent
4: Drafts
5: Voicemail
6: Mobile IM
CONTACTS
1: New Contact
2: Contact List
3: Groups
1: No Group
45
Menu Outline
2: Business
3: Colleague
4: Family
5: Friends
4: Speed Dials
5: In Case of Emergency
6: My Name Card
RECENT CALLS
1: Missed
2: Received
3: Dialed
4: All
5: View Timers
SETTINGS & TOOLS
1: Tools
1: Voice Commands
2: Calculator
1: Normal
2: Tip
3: Converter
3: Calendar
4: Alarm Clock
5: Stop Watch
6: World Clock
7: Notepad
2: Bluetooth Menu
1: Add New Device
3: Sounds Settings
1: Call Sounds
1: Call Ringtone
1: Get New Ringtones
2: Call Vibrate
2: Alert Sounds
Menu Navigation 46
1: TXT Message
1: Tone
1: Get New Ringtones
2: Vibrate
3: Reminder
2: Picture Message
1: Tone
1: Get New Ringtones
2: Vibrate
3: Reminder
3: Voicemail
1: Tone
1: Get New Ringtones
2: Vibrate
3: Reminder
4: Device Connect
3: Keypad Sounds
4: Keypad Volume
5: Service Alerts
1: ERI
2: Minute Beep
3: Call Connect
4: Service Change
6: Power On/Off
1: Power On
2: Power Off
4: Display Settings
1: Banner
1: Personal Banner
2: ERI Banner
2: Backlight
1: Display
1: Duration
2: Brightness
2: Keypad
47
Menu Outline
3: Wallpaper
4: Display Themes
5: Dial Fonts
1: Style
2: Size
6: Clock Format
5: Phone Settings
1: Standalone Mode
2: Set Shortcut Keys
1: Left Key
2: Up Key
3: Right Key
4: Down Key
5: Reset All
3: Voice Commands
1: Voice Dial
2: Voice Settings
3: Digit Dial Readout
4: Call Alert
4: Language
5: Location
6: Security
1: Edit Codes
1: Phone Only
2: Calls & Services
2: Restrictions
1: Location Setting
2: Calls
3: Messages
3: Phone Lock Setting
4: Lock Phone Now
5: Restore Phone
7: System Select
8: NAM Selection
Menu Navigation 48
1: NAM Selection
2: Auto NAM Selection
9: Quick Search
6: Call Settings
1: Answer Options
2: Auto Retry
3: TTY Mode
4: One Touch Dial
5: Voice Privacy
6: DTMF Tones
7: Memory
1: Phone Memory
1: Memory Usage
2: My Pictures
3: My Ringtones
4: My Sounds
2: Music Memory
8: Phone Info
1: My Number
2: SW Version
3: Icon Glossary
49
Changing the Text Entry Mode
Section 5: Entering Text
Topics Covered
•
•
•
•
•
•
Changing the Text Entry Mode
Entering Text Using Word Mode
Entering Characters in Abc Mode
Switching to Upper and Lower Case
Entering Symbols
Entering Numbers
This section outlines how to select the desired text input mode when entering
characters into your phone. This section also describes how to use the T9 predictive
text entry system to reduce the amount of key strokes associated with entering text.
Changing the Text Entry Mode
1. While composing a message, press left soft key
Abc to display a
pop-up menu with the following Text Entry Mode options:
• Word
• Abc
• ABC
• 123
• Symbols
• Shortcuts**
• Quick Text*
Note: The Shortcuts option is only available when the To field is highlighted. Use the Shortcuts option to
quickly enter @, .com, .net, or .edu to an Email address.**
The Quick Text option is only available when the Text field is highlighted. Use this option to quickly
enter common phrases*.
Tip: Press and hold the
to cycle between text entry modes (Abc, 123, and Word).
Entering Text 50
Entering Text Using Word Mode
Word recognizes the most commonly used word for any sequence of key presses
and inserts that word into your message. It’s much faster than the traditional method
of text entry (Abc) and requires only one key press per letter of the word that you’re
spelling.
1. From the main screen, press the left soft key
Message, then press
1
1
New Message,
message.
2. Enter the phone number or email address of the recipient, then use the
Navigation wheel or the Center Select key ( ) to move to the Text field.
Abc to display a pop-up menu containing text
TXT Message to compose a new text
3. Press the left soft key
entry mode options.
4. Abc is highlighted by default. Use the Navigation wheel to highlight Word,
then press the Center Select key ( ).
Now, for practice, enter the word “Hello” into your message by pressing
each of the following keys only once:
4
3
5
5
6
ghi
def
jkl
jkl
mno
H
E
L
L
O
Word mode displays the most frequently used word for the sequence of
numbers entered. The word you just entered is “Hello”. If more than one
word shares the same sequence, Word mode can display other matches
for the entered sequence of numbers as found in the default or user
0
dictionary. Press
to display other words in the dictionary, if available.
• If Word mode does not find the match that you desire, you can enter a new
word into the user dictionary by doing the following:
1. Switch to Abc mode by pressing the left soft key
and press the Center Select key ( ).
Word. Highlight Abc
2. Use Abc mode to enter the desired word on the screen. For more
information, refer to "Entering Characters in Abc Mode" on page 52.
Be sure the word is spelled correctly before pressing the space key.
#
3. When you press
to enter space after the word, the new word is
automatically added to the user dictionary.
51
Entering Characters in Abc Mode
Entering Characters in Abc Mode
• Enter characters while in Abc mode by pressing the key that contains the desired
4
characters
for “G”.
ghi
• Press the key repeatedly to cycle through other available characters for that key.
• Pause briefly when the desired character appears in the display to accept the
character and insert it into the message.
#
• Press
to enter a space.
Switching to Upper and Lower Case
• To cycle between initial caps, upper case, and lower case for characters in Abc or
Word mode, briefly press
.
Entering Symbols
Symbol mode enables you to enter symbols such as @ or % into a text message.
1. From the main screen, press the left soft key Message, then press
TXT Message to compose a new text
1
1
New Message,
message.
2. Enter the phone number or email address of the recipient, then use the
Navigation wheel or Center Select key ( ) to move to the Text field.
Abc to display a pop-up menu containing the
3. Press the left soft key
text entry mode options.
4. Abc is highlighted by default. Use the Navigation wheel to highlight
Symbols, then press the Center Select key ( ). The first of three
screens containing symbols appears in the display.
5. Press the left soft key Prev or the right soft key
through the other symbols, if necessary.
6. Enter the key that corresponds with the symbol that you wish to enter. For
Next to page
4
example, press
symbols.
for an exclamation point (!) on the first page of
ghi
7. Repeat steps 3 through 6 to insert as many symbols into your message as
desired.
Entering Text 52
Entering Numbers
Enter numbers into a text message while in number mode (123). For more
information, refer to "Changing the Text Entry Mode" on page 50.
1. From the main screen, press the left soft key
Message, then press
1
1
New Message,
message.
2. Enter the phone number or email address of the recipient, then press the
TXT Message to compose a new text
down navigation or the Center Select key (
) key to move to the Text
field.
3. Press the left soft key
Abc to display a pop-up menu containing the
text entry mode options.
4. Abc is highlighted by default. Use the Navigation wheel to highlight 123,
then press the Center Select key ( ).
5. Enter the key that corresponds with the number that you wish to enter. For
4
example, press
6. When you are finished adding numbers, press the left soft key
select a different method of text entry or press the Center Select key
) SEND to send your message.
for the number 4.
ghi
123 to
(
53
Opening Contacts Menu
Section 6: Understanding Your Contacts
Topics Covered
•
•
•
•
•
•
•
•
•
•
•
Opening Contacts Menu
Contacts Icons
Adding a Contact
Adding Pauses
Contact Groups
Finding a Contacts Entry
Editing an Existing Contact Entry
Deleting a Contact Entry
Speed Dialing
Emergency Contacts and Your In Case of Emergency List
My Name Card
This section describes how you to manage your daily contacts by storing their name
and number in your Address Book. Address Book entries can be sorted by name,
entry, or group.
Opening Contacts Menu
The Contacts menu provides access to powerful features such as adding Groups,
creating and sending vCards and viewing the phone number assigned to your phone
by Verizon Wireless.
1. From the main screen, press the Center Select key (
) MENU.
2. Scroll to CONTACTS
and press the Center Select key ( ).
• New Contact: Add a phone number, or Email to your Contacts.
• Contact List: Find a phone number by Name.
• Groups: Add new or rename one of your five default groups.
• Speed Dials: Set a speed dial for a contact.
• In Case of Emergency: Designate up to 3 contacts as those who should be
called in case of emergency. Also enter any important emergency information
(for example, medical history or severe allergies).
Understanding Your Contacts 54
• My Name Card: Create a business card, which can be sent to others as an
attachment.
3. Use the Navigation wheel to highlight the CONTACTS
your choice, then press the Center Select key ( ).
sub-menu of
Contacts Icons
You can assign multiple entries to a contact. The icons in the following table
represent all available entry types.
Mobile 1: Enter a mobile number for the entry in this field.
Home: Enter a home number for the entry in this field.
Work: Enter the work number for the entry in this field.
Email 1: Enter an email address for the entry in this field.
Group: Select an available group to associate with the entry in
this field.
Picture: Select an available picture from the Picture Gallery to
associate with the contact.
Ringtone: Select a ringtone to associate with the entry in this
field.
Mobile 2: Enter a secondary mobile number for the entry in this
field.
Fax: Enter a fax number for the entry in this field.
Email 2: Enter a secondary email address for the entry in this
field.
Notes: Enter a note for the entry in this field.
Note: Enter up to 64-character note associated with this contact.
55
Adding a Contact
Adding a Contact
When you add information to your Contacts, you can add it as a new entry or as an
existing entry.
Creating a new Contact from the main screen
1. From the main screen, press the Center Select key (
2. Scroll to CONTACTS and press the Center Select key (
New Contact to enter the contact information.
4. Enter a name for the entry using the keypad.
) MENU.
).
1
3. Press
5. Use the Navigation wheel to highlight the appropriate type (Name, Mobile
1, Home, Work, Email1, etc.). Once highlighted, use the keypad to enter
required information.
Use the Navigation wheel to highlight other type fields, if desired. Enter
information using the keypad.
6. To assign a Speed Dial location after entering the number, press the right
soft key
Options. Highlight Set Speed Dial and press the Center
Select key (
).
Highlight an unassigned location and press the Center Select key (
)
SET. A confirmation message appears in the display, Yes is highlighted,
press the Center Select key (
) to add the Contact to the speed dial
location.
Note: Voicemail is assigned to Speed Dial location 1 and cannot be changed by the user.
Note: You can assign a speed dial location to each number associated with the contact (Mobile 1,
Mobile 2, Home, Work, and Fax.).
7. When you’re finished entering information for the entry, press the Center
Select key ( ) SAVE to save the entry to your Contacts.
Adding a number to a new or existing Contact from the
main screen
You can add new numbers to the Contacts by simply entering the number from the
main screen, then following the necessary prompts to complete the process.
1. From the main screen, enter the number that you wish to save using the
keypad, then press the left soft key
Save. You’re prompted to select
from Add New Contact, Update Existing or Notepad.
Understanding Your Contacts 56
1
2. Press
Add New Contact to add the number as a new contact, press
2
Update Existing to add the number to an existing contact or press
abc
3
Notepad to save the number in the Notepad.
def
3. If you selected Add New Contact, the following types are available.
•
•
•
•
•
Mobile 1
Mobile 2
Home
Work
Fax
4. If you selected Update Existing, proceed to step 9. If you selected
Notepad, proceed to step 11.
5. Use the Navigation wheel to highlight the desired entry type (Mobile 1,
Mobile 2, Home, Work, etc.) then press the Center Select key (
).
6. Enter a name for the entry using the keypad. Press the left soft key
Abc if you wish to select a different method of text entry, such as Word,
Abc, ABC, 123, or Symbols.
7. To assign a Speed Dial location, use the Navigation wheel to highlight the
number you would like to assign to a Speed Dial location and press the
right soft key
Options. Highlight Set Speed Dial and press the
Center Select key (
).
Highlight an unassigned location and press the Center Select key (
)
SET. A confirmation message appears in the display, Yes is highlighted,
press the Center Select key (
) to add Contact to the speed dial
location.
Note: Voicemail is assigned to Speed Dial location 1 and cannot be changed by the user.
You can assign a speed dial location to each number associated with the contact (Mobile 1, Mobile 2,
Home, Work, and Fax).
8. When you’re finished entering information for the entry, press the Center
Select key (
) SAVE. The entry is saved to your Contacts.
9. If you selected Update Existing, the Contact List opens in Search mode.
Use the Navigation wheel to browse through entries, or enter the name of
the entry using the keypad. Once you’ve highlighted the contact entry,
press the Center Select key (
).
57
Adding a Contact
10. An Update Existing pop-up screen with a selection list of entry types
displays. use the Navigation wheel to highlight the desired type then press
the Center Select key (
). The number is added to the selected entry
and saved to your Contacts.
11. If you selected Notepad, the number is inserted on the ADD NEW NOTE
screen. When finished entering any other text, press the Center Select
key (
) SAVE to save the text to the Notepad list.
Storing Numbers After a Call
Once you’ve finished a call, you can store the number of the caller to your Contact
List.
Note: If the call was incoming and Caller ID information was unavailable, then the store option is also
unavailable.
1. After a call ends, the screen will briefly display "Save" in the lower right
corner. Press the right soft key
Save. Or, from the main screen,
press and use the Navigation wheel to highlight the phone number.
sEND
2. Press the right soft key
Options. Save is highlighted, press the
Center Select key (
).
Note: If Save does not appear in the Options list, the number is already saved in your Contacts.
3. You’re prompted to select from Add New Contact or Update Existing.
1
4. Press
Add New Contact to add the number as a new contact, or
2
press
Update Existing to add the number to an existing contact.
abc
5. If you selected Add New Contact, the following types are available.
•
•
•
•
•
Mobile 1
Mobile 2
Home
Work
Fax
6. If you selected Update Existing, proceed to step 11.
7. Use the Navigation wheel to highlight the desired entry type (Mobile 1,
Mobile 2, Home, Work, etc.) then press the Center Select key (
).
Understanding Your Contacts 58
8. Enter a name for the entry using the keypad. Press the left soft key
Abc if you wish to select a different method of text entry, such as Word,
Abc, ABC, 123, or Symbols.
9. To assign a Speed Dial location, use the Navigation wheel to highlight the
number you would like to assign to a Speed Dial location and press the
right soft key
Options. Highlight Set Speed Dial and press the
Center Select key (
).
Highlight an unassigned location and press the Center Select key (
)
SET. A confirmation message appears in the display, Yes is highlighted,
press the Center Select key (
) to add Contact to the speed dial
location.
Note: Voicemail is assigned to Speed Dial location 1 and cannot be changed by the user.
Note: You can assign a speed dial location to each number associated with the contact (Mobile 1, Mobile 2,
Home, Work, and Fax).
10. When you’re finished entering information for the entry, press the Center
Select key (
) SAVE. The entry is saved to your Contacts.
11. If you selected Update Existing, the Contact List opens in Search mode.
Use the Navigation wheel to browse through entries, or enter the name of
the entry using the keypad. Once you’ve highlighted the contact entry,
press the Center Select key (
).
12. An Update Existing pop-up screen with a selection list of entry types
displays. Use the Navigation wheel to highlight the desired type then press
the Center Select key (
). The number is added to the selected entry
and saved to your Contacts.
Adding Pauses
Calls to automated systems often require a password or account number. Instead of
manually entering numbers each time, store the numbers to your Contacts along
with special characters called pauses.
• Wait: A hard pause stops the calling sequence until further input from you.
• Pause: A two-second pause stops the calling sequence for two seconds and then
automatically sends the remaining digits.
1. From the main screen, enter the number.
59
Contact Groups
2. Press the right soft key
Options use the Navigation wheel to highlight
Add Wait (A “W” appears in the display.) or Add Pause (A “P” appears in
the display.) and press the Center Select key ( ).
3. When you’re finished entering information for the entry, press the left soft
key SAVE.
4. Continue with Step 2, Method 2 of Adding a Contact.
Note: Entering multiple two-second pauses extends the length of a pause. For example, two consecutive
two-second pauses cause a total pause time of four seconds. Keep in mind pauses count as digits
towards the 48-digit maximum.
Contact Groups
You can place Contact entries into categories, called “Groups.” Groups allow you to
search your Contacts faster, quickly send messages to one or more group members,
and more.
Note: By default, new entries to your Contacts are placed into the No Group unless another group is
specified.
View Groups
1. From the main screen, press the Center Select key (
) MENU.
2. Scroll to CONTACTS
and press the Center Select key ( ).
3
3. Press
Groups. The following groups appear in the display.
def
• No Group
• Business
• Colleague
• Family
• Friends
4. Use the Navigation wheel to highlight the desired group, then press the
Center Select key ( ) VIEW to access the group and view its contents.
Move an Entry to Another Group
1. From the main screen, press the right soft key
Contacts. Use the
Navigation wheel to highlight the contact you wish to move.
2. Press the left soft key
Edit. Use the Navigation wheel to scroll to the
Group option.
Understanding Your Contacts 60
3. Press the left soft key
Set. Choose from the following groups:
• No Group
• Business
• Colleague
• Family
• Friends
4. Use the Navigation wheel to highlight the group containing the entry that
you wish to move, then press the Center Select key ( ).
) SAVE. The selection has been saved to
5. Press the Center Select key (
the designated group.
Create a New Group
In addition to the five groups already in your phone, you can create additional groups
(a maximum of 30). New groups can be named anything you like as long as their
names are within the 32-character limit.
1. From the main screen, press the Center Select key (
) MENU.
2. Scroll to CONTACTS
and press the Center Select key (
).
3
3. Press
Groups. Your existing groups appear in the display.
def
4. Press the left soft key
New. A New Group pop-up menu displays
with the “Enter New Name” field highlighted.
5. Enter the Groups name.
6. Press the Center Select key (
) SAVE to save. The Groups list now
displays the new group added.
Send a Text Message to Members of a Group
Use Send Message in the Group feature to send a message to as many as 10
members of a group at once.
Note: Text messaging availability varies when roaming off the Verizon Wireless Network.
1. From the main screen, press the Center Select key (
2. Scroll to CONTACTS and press the Center Select key (
Groups. Your existing groups appear in the display.
4. Highlight the desired group name and press the right soft key
Options. Highlight New TXT Msg and press the Center Select key
key ( ).
) MENU.
).
3
3. Press
def
61
Contact Groups
5. Use the Navigation wheel to highlight the contacts in the group you want to
send a message. Press the Center Select key (
checkmark next to each selection you want to receive the TXT message.
6. Press the left soft key Done after selecting up to 10 contacts.
) MARK to place a
Note: You can mark up to 10 members of a group for message distribution. If you try and mark an 11th
member, you’ll be notified that “MAXIMUM NUMBER OF RECIPIENTS IS 10”.
7. Use the Navigation wheel or the Center Select key (
) to place the
cursor in the Text field.
8. Enter the content of your message using the keypad.
9. To send the text message, press the Center Select key (
Send a Picture Msg to Members of a Group
) SEND.
Note: Only available within Verizon Wireless Enhanced Services Area.
1. From the main screen, press the Center Select key (
) MENU.
2. Scroll to CONTACTS
and press the Center Select key (
).
3
3. Press
Groups. Your existing groups appear in the display.
def
4. Highlight the desired group name and press the right soft key
Options. Highlight New Picture Msg and press the Center Select key
).
5. Press the Navigation wheel down to highlight the contacts in the group you
want to send a message. Press the Center Select key ( ) MARK to
(
place a checkmark next to each selection you want to receive the Picture
message.
6. Press the left soft key
Done after selecting up to 10 contacts.
7. Press the Navigation wheel down to move the cursor into the following
entry fields:
• Text: Add text to the Picture Msg.
• Picture: Add an image from My Pictures to the message. Press the left soft key
My Pics to add an image to the message. Select an image and press the
Center Select key (
).
• Sound: Add sound to the Picture Msg. Press the left soft key
add sound to the message. Select a sound and press the
Sound to
Center Select key (
).
• Subject: Add a subject line to the Picture Msg.
Understanding Your Contacts 62
• Name Card: Add a name card to the Picture Msg. Press the left soft key
1
Add. Press
My Name Card to insert your on personal name card or
2
Contacts to insert a contacts name card, select a name card and press
).
8. Once you’ve finished adding the desired content to your Picture Msg, press
abc
the Center Select key (
the Center Select key (
) SEND to send the Picture Msg to the intended
recipients.
Finding a Contacts Entry
Contacts is a quick way of viewing entries you’ve stored in the Contacts list.
1. From the main screen, press the right soft key
Contacts. The Contact
List displays.
2. In the Go To field, enter the first few letters of the name you wish to find
until it is highlighted.
Editing an Existing Contact Entry
1. From the main screen, press the Center Select key (
) MENU.
).
2. Scroll to CONTACTS and press the Center Select key (
2
3. Press
4. Use the Navigation wheel to highlight the contact list entry and press the
left soft key Edit.
Contact List.
abc
5. Use the Navigation wheel to highlight the name, number, email address, or
other field that you wish to edit.
CLR
6. Press
to backspace and delete numbers, text, or symbols.
CLR
7. Press and hold
to erase everything in the highlighted field.
8. Use the keypad to re-enter numbers, text, or symbols.
9. When you’re finished editing the entry, press the Center Select key (
)
SAVE. Your changes are saved.
63
Deleting a Contact Entry
Deleting a Contact Entry
1. From the main screen, press the Center Select key (
) MENU.
2. Scroll to CONTACTS
and press the Center Select key (
).
2
3. Press
Contact List.
abc
4. Use the Navigation wheel to highlight the contact list entry and press the
Center Select key (
) VIEW.
5. Press the left soft key
Erase.
6. A pop-up “ERASE CONTACT?” screen displays.
7. Highlight Yes or No, then press the Center Select key (
).
Speed Dialing
Note: 1-Touch, 2-Touch, and 3-Touch dialing allows you to call numbers stored in your Contact List
quicker.
Speed dialing allows you to press and hold a key (or keys) to dial the number
associated with those key(s). There are three types of speed dialing; 1-touch,
2-touch, and 3-touch dialing.
Note: Memory location 001 is reserved for voicemail.
1-touch dialing
Call phone numbers assigned to memory locations 002 - 009 by pressing and
holding the any of the 2 - 9 keys. For example, to speed dial the number assigned to
2
location 2, press and hold
and the number is dialed.
until the name and number appear in the display
abc
2-touch dialing
Call phone numbers assigned to keys 010 through 099 by briefly pressing the first
key, then pressing and holding the second key. For example, to speed dial the
1
3
number assigned to 013, briefly press
number dials.
, then press and hold
until the
def
3-touch dialing
Call phone numbers assigned to memory locations 100 through 999 by briefly
pressing the first and second keys, then pressing and holding the third key. For
1
1
example, to dial location number 113, briefly press
,
, then press and hold
3
until the number dials.
def
Understanding Your Contacts 64
Assign a speed dial location
1. From the main screen, press the Center Select key (
) MENU.
2. Scroll to CONTACTS
and press the Center Select key ( ).
4
3. Press
Speed Dials. The Speed Dials screen displays with the first
ghi
available number highlighted.
4. Use the Navigation wheel to highlight the Speed Dial location you wish to
assign a number or enter the speed dial location using the keypad, press
the Center Select key (
) SET.
5. The Set Speed Dial screen displays.
6. Use the Navigation wheel to highlight the entry, then press the Center
Select key (
).
7. At the pop-up screen, "SET SPEED DIAL TO CONTACT?" use the
Navigation wheel to highlight Yes or No and press the Center Select key
(
).
END
8. Continue to assign speed dial entries or press the
key to return to the
main screen.
Emergency Contacts and Your In Case of
Emergency List
The In Case of Emergency (ICE) menu allows you to store emergency information.
1. From the main screen, press the Center Select key ( ) MENU.
2. Scroll to CONTACTS
and press the Center Select key (
).
5
3. Press
In Case of Emergency.
jkl
4. Select a Contact location and press the Center Select key (
) ADD. The
following options appear in the display:
• From Contacts: Allows you choose a contact entry. Highlight a contact entry
and press the Center Select key (
up displays.
). The “Ice Contact Assigned” pop-
• New Contact: Allows you to enter a new emergency number. Enter the Name
and Number of your emergency contact and press the Center Select key
(
) SAVE. The “Contact Saved And Set As ICE Contact” pop-up
displays.
Note: Emergency number 911 is hard-coded into your phone. You can dial this number any time, even
when the phone is locked or restricted. If you call 911 an audible tone is heard and an emergency
prompt appears in the display for the duration of the call.
65
My Name Card
Important!: DO NOT depend on this phone as a primary method of calling 911 or for any other essential or
emergency communications.
Remember to always turn your phone on and check for adequate signal strength
before placing a call.
Calling Emergency Numbers when the Phone is Locked
Two types of calls can be made if the phone is locked.
9
1
1
sEND
1. Pressing
will call 911.
wxyz
2. Pressing the left soft key
labled ICE on the main screen will access
the In Case of Emergency Call list that you have set up. Highlight a
contact in the ICE CONTACTS list and press the Center Select key (
to call.
)
Note: If you dial 911, your phone dials the emergency number immediately (no prompt).
My Name Card
My Name Card allows you to create a virtual business card. Once completed, you
can send the card to recipients as a vCard attachment.
1. From the main screen, press the Center Select key (
) MENU.
2. Scroll to CONTACTS
and press the Center Select key ( ).
6
3. Press
My Name Card. My Name Card opens with the Name field
mno
highlighted.
4. Enter information in each of the fields as desired. Use the Navigation wheel
to move between fields, then use the keypad to enter information.
5. When finished, press the Center Select key (
) SAVE to save the Name
Card.
Understanding Your Contacts 66
Sending Contact Information (vCard) to another
Bluetooth enabled phone
You can send individual contacts or your entire contact list to or from another device
that is Bluetooth enabled*.
Note: The receiving device must support vCard transfer in order to send contact information.
Note: *If Bluetooth is not powered on, or your Juke is not paired with another device, see "Bluetooth Menu"
on page 83.
1. From the main screen, press right soft key
Contacts.
2. Highlight the contact to receive vCard.
3. Press right soft key
Options.
8
4. Press
Send Name Card. The following options display:
tuv
• TXT Message: Allows you to send a name card via TXT Message. A name
card with a picture cannot be sent in a TXT Message because it exceeds the
maximum number of characters allowed.
• Picture Message: Allows you to send a name card via Picture Message.
• Bluetooth: Allows you to send a name card to a Bluetooth enabled device.
3
5. Press
Bluetooth.
def
6. Highlight the desired contact and press the Center Select key (
MARK. To choose all contacts, press right soft key Mark All.**
7. When finished, press left soft key Done.
)
Note: If you are not already paired to the destination device, please see Step 3 of Search on page 84.
8. Highlight the destination device and press the Center Select key (
).
9. Highlight Yes to connect to the other device and press the Center Select
key ( ).
10. The other device will ask to connect. Press the Center Select key (
).
11. “CONNECTING” appears in the display.
12. When the information is exchanged, a message will appear that the
transfer is complete.
Note: **All information in the contact entry can be transferred except for assigned group or ringtones.
67
Types of Messages
Section 7: Messaging
Topics Covered
•
•
•
•
•
•
•
•
Types of Messages
Retrieving New Messages
Creating and Sending TXT Messages
Creating and Sending Picture Messages
Message Folders
Changing Message Settings
Voicemail
Mobile IM
This section describes how to send or receive different types of messages. It also
includes the features and functionality associated with messaging.
Types of Messages
Your phone is capable of sending Email, text, picture and voicemail messages. Send
Email, text, and picture messages by simply entering the Email address or the phone
number of the recipient in the To: <.........> or Send To field when creating a new
message.
Retrieving New Messages
While text messages from other phones are delivered directly to your phone, Picture
messages and Emails will be stored in the Inbox of the message server and the
server will alert you to new messages. Therefore you need to retrieve new messages
to your phone and read them on the phone.
Messaging 68
Receiving Text Messages
When you receive a message on the main screen, the message ringer sounds,
(unless turned off), and NEW TXT MESSAGE appears in the display with the prompt
to View Now or View Later. The date and time of the message also appear in the
display.
1. When you receive a new TXT message, press the
Center Select key (
) to View Now, or press
the Navigation wheel down to highlight View
Later and press the Center Select key (
message is saved to your Inbox where you can
view it later.
). The
2. With the message open, press the
Erase or
Options soft keys to display the following
options.
• Press the left soft key
message.
Erase to erase the
• Press the right soft key
display:
Options. The following options may appear in the
-
-
-
Forward: Forward the message to another recipient.
Reply w/copy: Sends original message and the reply to the recipient.
Save Quick Text: Saves the text received in the message to the Quick Text
list.
-
-
Lock/Unlock: Locks or unlocks the entry to prevent accidental deletion.
Add To Contacts: Save the number of the sender to your Contacts as a new
entry or add to an existing entry.
-
-
Message Info: Provides the following information: From and Callback
Number, Priority, Msg Type, Size and Attachments (including Picture filename
and Sound filename, if any).
Find Number & Address: Tries to isolate any phone numbers or email
addresses within the body of the message to save to your contacts. On the
NUMBER & ADDR screen, you can press the Center Select key (
CALL a highlighted phone number, or you can press the Center Select key
) to SEND a new message to a highlighted email address.
) to
(
3. With the message open, press the Center Select key (
) REPLY to
return a message to the sender.
Note: When viewing a TXT message, you can view the previous TXT message by pressing the Navigation
wheel left and view the next TXT message by pressing the Navigation wheel right.
69
Retrieving New Messages
Receiving Picture Messages
When you receive a new Picture Message, NEW PICTURE MSG appears in the
display along with the options View Now, or View Later.
Note: For the option Reject to appear in the display when you receive a Picture Msg, Auto Receive mode
must be set to Off in the Message Settings menu.
1. When you receive a new Picture Msg, press the
Center Select key (
) to View Now, or press
the Navigation wheel down to highlight View
Later.
2. If you select View Now, Loading... appears in the
display.
3. After loading, the image (and text if any) contained
in the Picture Msg appear in the display.
4. Use the Navigation wheel to scroll through the
message or view the entire picture if necessary.
5. Press the left soft key
right soft key
Erase/Mute or the
Options to display the following options.
Note: The left soft key
Mute only displays when a sound byte is attached to a message.
• Press the left soft key
Erase/Mute to erase the message or mute the
sound sent with the picture message.
• Press the right soft key
display:
Options. The following options may appear in the
-
-
-
-
-
-
-
Play Again: Replays the sound in the message.
Forward: Forwards the message to another recipient.
Erase: Deletes the message.
Save Picture: Saves the picture to My Pictures.
Save As Ringtone: Saves the sound to My Ringtones.
Save Sound: Saves the sound to My Sounds.
Save Quick Text: Saves the text received in the message to the Quick Text
list.
-
-
Lock/Unlock: Locks or unlocks the entry to prevent accidental deletion.
Add To Contacts: Saves the number of the sender to your Contacts as a new
entry or add to an existing entry.
Messaging 70
-
-
Message Info: Provides the following information: From and Callback
Number, Priority, Msg Type, Size and Attachments (including Picture filename
and Sound filename, if any).
Find Number & Address: Tries to isolate any phone numbers or email
addresses within the body of the message to save to your contacts. On the
NUMBER & ADDR screen, you can press the Center Select key (
CALL a highlighted phone number, or you can press the Center Select key
) to SEND a new message to a highlighted email address.
) to
(
Note: When viewing a Picture message, you can view the previous Picture message by pressing the
Navigation wheel left and view the next Picture message by pressing the Navigation wheel right.
Receive Messages While in a Call
1. When you receive a message while in a call, the NEW TXT MESSAGE or
NEW PICTURE MSG dialog box appears in the display.
Note: Text messages can only be viewed during a call. Picture messages can not be downloaded during a
call.
2. You can view the message without disconnecting your call by selecting
View Now and press the Center Select key (
).
To reference a message(s) while in a call
1. Press the right soft key
Options.
2. Messaging is highlighted, press the Center Select key (
).
2
3
4
ghi
3. To select a folder, press
Inbox,
Sent,
Drafts and press
abc
def
the Navigation wheel up or down to highlight the message you want to
view and press the Center Select key (
) OPEN to view the message.
View a Picture Message Later
1. When you receive a new Picture message that you would like to view later,
highlight View Later and press the Center Select key ( ).
Note: If you receive a Picture message while on a call, a pop-up box will display with a New Picture
message and message information. You cannot choose to view now or view later. You can only press
the Center Select key
to clear the pop-up box from the screen. After the call has ended, you
may view the picture by following steps 2 and 3.
2
2. To view the message, press the left soft key
Message,
.
Inbox
abc
3. Use the Navigation wheel to highlight the unopened message, and press
the Center Select key ( ) OPEN. Then press the Center Select key
) DOWN to download the picture from the message server.
(
71
Creating and Sending TXT Messages
Creating and Sending TXT Messages
You can send text messages to another mobile phone or to an Email address.
1. From the main screen, press the left soft key (
) Message.
1
2. Press
New Message.
1
3. Press
TXT Message to compose a new text message.
4. Enter the phone number or Email address of the recipient. At any point
while entering your recipient(s) phone number or Email address, press the
left soft key
options.
123 or the right soft key
Add to display additional
• Press the left soft key
123 to change Text Entry Mode. Choose Word, Abc,
ABC, 123, Symbols or Shortcuts modes of text entry.
• Press the right soft key
Add to add a recipient From Contacts, Recent
Calls or Groups. If you have entered a new phone number in the To field, you will
also see an option to save it To Contacts.
CLR
Note: If you do not select an option press the
to return to your message.
5. Press the Navigation wheel down or the Center Select key (
) to move
to the Text field. In the text field, compose your message using the keypad.
At any point while composing a message, press the left soft key Abc
or right soft key Options to display additional options.
Tip: For more information on entering text and text entry modes see "Entering Text" on page 50.
• Press the left soft key
Abc to change Text Entry Mode. Choose Word,
Abc, ABC,123, Symbols, or Quick Text modes of text entry.
• Press the right soft key
options listed:
Options to display a pop-up menu with the
-
-
-
-
-
Save As Draft: Save the message to your Draft folder.
Add Graphic: Lists preloaded and downloaded graphics.
Add Animation: Lists preloaded and downloaded animations.
Add Sound: Lists preloaded and downloaded sounds.
Add Quick Text: Displays a list of phrases that you can quickly insert into the
message.
-
-
Add Name Card: Allows you to attach your name card to the message.
Edit Text Format: Allows you to edit the text size, alignment, style, color, and
background color.
-
-
Priority Level: Save the message with a High or Normal priority.
Callback #: Provides the ability to send a callback # with the message.
Messaging 72
-
-
Enh. Delivery Ack: Displays a pop-up screen notifying the message sent has
been received.
Cancel Message: Cancels the message and allows you to save it in the Drafts
folder.
CLR
Note: If you do not select an option press the
to return to your message.
6. Use the Navigation wheel to highlight an option. Press the Center Select
key ( ) to perform the function for the option, or to enter its sub-menu.
7. To send the message, press the Center Select key (
) SEND.
Creating and Sending Picture Messages
Note: Only available within Verizon Wireless Enhanced Services Area.
Picture Messages allow you to add sounds and images to your message.
1. From the main screen, press the left soft key (
) Message.
1
2. Press
New Message.
2
3. Press
Picture Message to compose a new message.
abc
4. Enter the phone number or Email address of the recipient. At any point
while entering your recipient(s) phone number or Email address, press the
left soft key
options.
123 or the right soft key
Add to display additional
• Press the left soft key
123 to change Text Entry Mode. Choose Word, Abc,
ABC, 123, Symbols or Shortcuts modes of text entry.
• Press the right soft key
Recent Calls, or To PIX Place.
Add to add a recipient From Contacts, Groups,
CLR
Note: If you do not select an option press the
to return to your message.
5. Press the Navigation wheel down or the Center Select key (
to the Text field. In the text field, compose your message using the keypad.
At any point while composing a message, press the left soft key Abc
or the right soft key Options to display additional options.
) to move
Tip: For more information on entering text and text entry modes see "Entering Text" on page 50.
• Press the left soft key
Abc to change Text Entry Mode. Choose Word,
Abc, ABC,123, Symbols or Quick Text modes of text entry.
73
Creating and Sending Picture Messages
• Press the right soft key
options listed:
Options to display a pop-up menu with the
-
-
-
Preview: Shows the message before it is sent.
Save As Draft: Save the message to your Draft folder.
Add Quick Text: Choose from up to 12 pre-loaded messages. You can add
15 additional messages by pressing the right soft key
New and erase
messages by pressing the left soft key
Erase.
-
-
Priority Level: Save the message with a High or Normal priority.
Cancel Message: Cancels the message and allows you to save it in the Drafts
folder.
CLR
Note: If you do not select an option press the
to return to your message.
6. Press the Navigation wheel down to highlight the Picture field. Press the
left soft key My Pics to add a Picture, using the Navigation wheel
highlight a picture you want to attach and press the Center Select key
) to attach the picture.
7. Press the Navigation wheel up or down to highlight the Sound field. Press
the left soft key Sounds to select a sound. Press the Navigation
wheel up or down to highlight the desired sound and press the Center
Select key ( ).
8. Press the Navigation wheel down to highlight the Subject field. Press the
left soft key Abc to change entry mode. Select the desired entry
mode, and press the Center Select key ( ).
(
Press the right soft key
Options, to highlight Add Quick Text and
press the Center Select key (
). Press the Navigation wheel up or down
to highlight the desired Quick Text phrase, and press the Center Select
key ( ).
9. Press the Navigation wheel down to highlight the Name Card field. Press
the left soft key
Add to add a Name Card, the Add pop-up menu
displays.
1
• Press
My Name Card to create and add your Name Card, press the
Center Select key (
).
2
• Press
Contact to add a Contact entry as a Name Card, press the
abc
Center Select key (
).
10. Once all fields are complete, press the Center Select key (
) to send the
message to the intended recipient(s).
Messaging 74
Message Folders
Your phone provides default message folders for your Text and Picture messages.
Note: To quickly view all messages in the Inbox, or Sent folders, open one message and then use the
Navigation wheel to view the next message or use the Navigation wheel to view the previous
message.
Inbox
Received messages of all types are stored in the Inbox folder.
2
1. Press the left soft key
Message then press
Inbox.
abc
2. Use the Navigation wheel to highlight the message you want to view.
3. Press the Center Select key (
) OPEN to view contents of the
highlighted message.
Tip: While viewing a message press the left or right navigation to view other messages.
4. While viewing a message press the right soft key
Options. The
following options may appear in the display:
• Play Again: Replays a Picture message with sound.
• Forward: Forward the message to another recipient.
• Erase: Deletes the message. This option only displays if a sound byte is
attached to the message.
• Reply w/copy: Sends original message and the reply to the recipient.
• Save Picture: Saves the picture sent in a Picture message to My Pictures.
• Save As Ringtone: Saves the sound received with the Picture message to My
Ringtones.
• Save Sound: Saves the sound received with the message to My Sounds.
• Save Object: Saves the graphics sent in a message to My Pictures.
• Save Quick Text: Saves text in the Text field to the Quick Text list.
• Lock/Unlock: Locks or unlocks the entry to prevent accidental deletion.
• Add To Contacts: Save the number of the sender to your Contacts as a new
entry or add to an existing entry.
• Find Number & Address: Tries to isolate any phone numbers or email
addresses within the body of the message to save to your contacts. On the
NUMBER & ADDR screen, you can press the Center Select key (
) to CALL
a highlighted phone number, or you can press the Center Select
key (
) to SEND a new message to a highlighted email address.
• Message Info: Provides the following information: From (also provides the date
and time the message was received), Callback Number, Priority, Msg Type, Size
75
Message Folders
(if a Picture, or Sound were included in the message) and Attachments (if a
Picture, or Sound were included in the message).
Press the left soft key
Erase to delete the message from the Inbox.
Highlight Yes to delete, or No to return to the message.
5. Press the Center Select key (
) REPLY to return a message to the
sender.
Note: When Auto Erase is turned on, the oldest read TXT message is replaced by an incoming TXT message
when0 TXT messages are stored in the Inbox, and the oldest read Picture message is replaced by an
incoming Picture message when 50 Picture messages are stored in the Inbox. For information on
how to set Auto Erase and Auto Receive, see "Changing Message Settings" on page 80.
Sent
Your phone stores messages in the Sent folder, regardless of whether the message
was successfully transmitted. Verify if and when a TXT message or Email was
successfully transmitted by enabling the Enh. Delivery Ack feature. Press the right
soft key
Options to set the Enh. Delivery Ack feature On when creating a new
message.
Note: Enhanced Delivery Acknowledgement can't be set for Picture messages.
Review Messages in the Sent Folder
1. From the main screen, press the left soft key
Message then press
3
Sent.
def
2. Use the Navigation wheel to highlight the message you wish to review,
then press the Center Select key ( ) OPEN.
Tip: While viewing a message press the left or right navigation to view other messages.
3. While viewing the message, press the right soft key
Options. Use the
Navigation wheel to highlight the desired option. Press the Center Select
key (
) to perform the function for the highlighted option. Options are
dependent on the message type:
• For Text Messages the following options may appear in the display:
-
-
-
-
Forward: Forwards the message to another recipient.
Lock/Unlock: Locks or unlocks the entry to prevent accidental deletion.
Save Quick Text: Saves the text sent in the message to the Quick Text list.
Add To Contacts: Adds the sender’s information to your contact list.
Messaging 76
-
-
Find Number & Address: Tries to isolate any phone numbers or email
addresses within the body of the message to save to your contacts. On the
NUMBER & ADDR screen, you can press the Center Select key (
) to
CALL a highlighted phone number, or you can press the Center Select
key (
) to SEND a new message to a highlighted email address.
Message Info: Provides the following information: Send To Number or Email
address, Priority, Msg Type, Size, Status and Cause Code.
• For Picture Messages the following options may appear in the display:
-
-
-
-
-
-
-
Play Again: Plays the sound byte attached to the message.
Forward: Forwards the message to another recipient.
Erase: Erases the message.
Lock/Unlock: Locks or unlocks the entry to prevent accidental deletion.
Save Quick Text: Saves the text sent in the message to the Quick Text list.
Add To Contacts: Adds the sender’s information to your contact list.
Find Number & Address: Tries to isolate any phone numbers or email
addresses within the body of the message to save to your contacts. On the
NUMBER & ADDR screen, you can press the Center Select key(
a highlighted phone number, or you can press the
) to CALL
Center Select key (
address.
) to SEND a new message to a highlighted email
-
Message Info: Provides the following information: Send To Number or Email
address, Priority, Msg Type, Size, Attachment, Status and Cause Code.
4. Use the Navigation wheel to highlight the desired option.
5. Press the Center Select key (
) to perform the function for the
highlighted option.
77
Message Folders
Note: If no sound byte is attached to the message, press the left soft key
Erase to delete the
message from the Sent folder. Highlight Yes to delete, or No to return to the message.
If a sound byte is attached to the message, press the left soft key
unmute the sound playback.
Mute/Unmute to mute/
6. Press the Center Select key (
) SEND to compose the message with
same contents to the recipient again.
Drafts
Draft messages are those that have been composed but never sent. You can return
to the Drafts folder at any time to view, edit, or send a draft message.
Create a Draft Text Message
1. From the main screen, press the left soft key
Message then press
1
New Message.
2. Select the type of message you want to create.
3. Enter the phone number of the recipient, then press the Navigation wheel
down.
4. Compose your message using the keypad, then press the right soft key
Options. A pop-up menu appears in the display.
5. Save As Draft is highlighted, press the Center Select key (
).
View and Edit Draft Messages
1. From the main screen, press the left soft key
Message then press
4
Drafts.
ghi
2. Use the Navigation wheel to highlight the message you wish to view, then
press the Center Select key (
) EDIT.
CLR
Note: Press
to backspace and delete any current characters in the display, if desired.
CLR
Press and hold
to erase a word.
3. Edit the To field. Press the down navigation to move to the Text field.
4. Edit the Text field.
Press the right soft key
Options. A pop-up menu appears in the
display with the options listed.
• For Text Messages the following options appear in the display:
-
Save As Draft: Saves the message in the draft folder.
-
Add Graphic: Lists all graphics pre-loaded and downloaded.
Messaging 78
-
-
-
Add Animation: Lists all animations pre-loaded and downloaded.
Add Sound: Lists all sounds pre-loaded and downloaded.
Add Quick Text: Choose from up to 12 pre-loaded messages. You can add
15 additional messages by pressing the right soft key
New and erase
messages by pressing the left soft key
Erase.
-
-
Add Name Card: Allows you to attach your name card to the message.
Edit Text Format: Allows you to edit the text size, alignment, style, color, and
background color.
-
-
-
Priority Level: Save the message with a High or Normal priority.
Callback #: Provides the ability to send a callback # with the message.
Enh. Delivery Ack: Displays a pop-up screen notifying the message sent has
been received.
-
Cancel Message: Cancel the current message.
• For Picture Messages the following options appear in the display:
-
-
-
Preview: Allows you to preview the message.
Save As Draft: Saves the message in the draft folder.
Add Quick Text: Choose from up to 12 pre-loaded messages. You can add
15 additional messages by pressing the right soft key
messages by pressing the left soft key Erase.
New and erase
-
-
Priority Level: Save the message with a High or Normal priority.
Cancel Message: Cancels the message and allows you to save it in the Drafts
folder.
5. Use the Navigation wheel to highlight the desired option. Press the Center
Select key ( ) to perform the function for the highlighted option.
6. Once you’ve returned to the message composer, press the Center Select
key ( ) to send the message, if desired.
Erase Options
You can erase unlocked messages in your Inbox, Drafts folder, or Sent folder. Locked
messages are not erased.
To erase messages:
1. Press the left soft key
MESSAGE.
2. Press the right soft key
Options. The following options are available:
• Erase Inbox: Erases unlocked messages in your Inbox.
• Erase Drafts: Erases unlocked messages in your Drafts folder.
• Erase Sent: Erases unlocked messages in your Sent folder.
• Erase All: Erases unlocked messages in all message folders
(Inbox, Drafts and Sent).
79
Changing Message Settings
Changing Message Settings
This menu allows you to define settings for messages sent or received on your
phone. To access your message settings, use the following steps:
1. From the main screen, press the left soft key
press the left soft key Settings.
Message and then
• Entry Mode: Sets the default entry mode for messaging. Choose from Word,
Abc, ABC, or 123.
• Auto Save Sent: Saves all messages sent. Use the Navigation wheel to select
On, Off, or Prompt.
• Auto Erase Inbox: Erases the oldest message of the same type (TXT or
Picture) when the maximum number of received messages of that type is
exceeded in the Inbox. For example, the oldest read TXT message is replaced by
an incoming TXT message when 100 TXT messages are stored in the Inbox, and
the oldest read Picture message is replaced by an incoming Picture message
when 50 Picture messages are stored in the Inbox. Choose from On or Off.
• Messaging Font Size: Allows you to change the font size for viewing
messages to Normal or Large.
• TXT Auto View: Automatically displays the TXT message when received.
Choose from On or Off.
• Pic Auto Receive: Automatically receives a Picture message into your Inbox.
Choose from On or Off.
• Quick Text: Displays the Quick Text list, and allows you to erase or add a new
phrase.
• Voicemail #: Displays the speed dial entry set for your voicemail, , and allows
you to change it. Press the right soft key
change the entry.
Cancel if you don't want to
• Callback #: Displays the callback number in the text message. Choose from
On or Off.
• Signature: Adds the signature text to each message sent. Choose from None
or Custom.
Messaging 80
Voicemail
When you receive a new voicemail message you’ll hear a sound and a prompt
screen appears in the display.
1. Press the Navigation wheel up or down to select Listen Now or Listen
Later.
2. Press the Center Select key (
).
View Voicemail Messages in the Inbox Folder
1. From the main screen, press the left soft key
Message.
5
2. Press
Voicemail.
jkl
3. Press the Center Select key (
) CALL to call voicemail.
1
Note: You can also press and hold
from the main screen to call voicemail.
Mobile IM
The Instant Messaging function allows you to send and receive instant messages
using one of the following communities:
• AOL® Instant Messenger™
• Windows Live (WL)® Messenger
• Yahoo!® Messenger
Note: You can set up your Mobile IM account from your home computer. After setting up your Mobile IM
account you can log in through your handset. You cannot use your handset to set up a new IM
account. Messages will be charged according to your Text Massaging plan.
Using Mobile IM
1. From the main screen, press the left soft key
Message.
).
6
2. Press
Mobile IM.
mno
3. Highlight Mobile IM and press the Center Select key (
4. Select your instant message community using the Navigation wheel left or
right and press the Center Select key ( ).
5. Use the on-screen application specific functions and options to use the
instant message applications.
81
Tools
Section 8: Changing Your Settings
Topics Covered
•
•
•
•
•
•
•
•
Tools
Bluetooth Menu
Sounds Settings
Display Settings
Phone Settings
Call Settings
Memory
Phone Info
This section explains the sound and phone settings for your phone. It includes
display settings, security settings, and extra settings associated with your phone.
Tools
The Tools menu provides the ability to access the following menus:
• Voice Commands: For more information, refer to "Voice Commands" on page 34.
• Calculator: For more information, refer to "Calculator" on page 122.
• Calendar: For more information, refer to "Calendar" on page 124.
• Alarm Clock: For more information, refer to "Alarm Clock" on page 126.
• Stop Watch: For more information, refer to "Stop Watch" on page 128.
• World Clock: For more information, refer to "World Clock" on page 129.
• Notepad: For more information, refer to "Notepad" on page 129.
Changing Your Settings 82
Bluetooth Menu
About Bluetooth
Bluetooth is a short-range wireless communications technology capable of
exchanging information over a distance of about 30 feet without requiring a physical
connection.
Unlike infrared, you don't need to line up the devices to beam information with
Bluetooth. If the devices are within a range of one another, you can exchange
information between them, even if they are located in different rooms.
Note: When connected to your Bluetooth headset, press the headset multi-function key to use
VoiceSignal’s Voice Dial feature.
Bluetooth Service Profiles
Actually, the Bluetooth specification is a protocol that describes how the short-range
wireless technology works, whereas individual profiles describe the services
supported by individual devices. Profiles reduce the chance that different devices
will not work together.
Your phone supports the following Bluetooth profile services:
• Voice Calls are supported using any of the following depending on the accessory:
HSP - Headset or HFP - Hands-free profiles. *
• Bluetooth Stereo uses A2DP - Advanced Audio Distribution Profile and AVRCP -
Audio/Video Remote Control Profile.
• Transfer Object allows sending an OPP - Object Push Profile which allows transfer
of vCard (i.e., Contact information) between devices.
• Automobile Kits can use any of the following: HFP - Hands-free or PBAP - Phone
Book Access Profiles. *
• Connectivity Connections (i.e. computer) are supported using SPP - Serial Port
(connecting two BT devices).
* For vehicle/accessory compatibility, go to www.verizonwireless.com/bluetooth
chart. Phone does not support all Bluetooth OBEX profiles.
83
Bluetooth Menu
On/Off
When the Bluetooth radio is turned on, you can use the Bluetooth features available.
When the Bluetooth radio is turned off, you cannot send or receive information via
Bluetooth. To save battery life or in situations where radio use is prohibited, such as
airline traveling, you can turn off the Bluetooth wireless technology.
Warning!: To ensure that the Hearing Aid Compatibility rating for your phone is maintained, secondary
transmitters such as Bluetooth and WLAN components must be disabled during a call. For
instructions to disable these components, see "Changing Your Settings" on page 82.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
2
3. Press
Bluetooth Menu.
abc
4. Press the left soft key
to turn Bluetooth On or Off.
Note: If Bluetooth is turned on, the
Bluetooth icon displays in the top line of the display.
Changing Your Settings 84
Search
This option searches for a recognized Bluetooth wireless technology device.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
2
3. Press
Bluetooth Menu.
abc
4. Add New Device is highlighted, press the Center Select key (
) twice.
Note: If you have NOT already activated Bluetooth on the phone, the message
“TURN BLUETOOTH POWER ON?” displays. Highlight Yes to activate or No to exit and press the
Center Select key (
).
5. A list of found Bluetooth devices will be displayed. Use the Navigation
wheel to highlight a Bluetooth device. Press the Center Select key (
pair the devices.
) to
6. The phone automatically attempts to send a passkey of "0000" to a
hands-free device and shows the message "ATTEMPTING TO AUTO PAIR".
If the default passkey is not successful, the phone will display the message
" FAILED IN AUTO PAIR . ENTER PASSKEY". (If you are attempting to pair
with a car kit, be sure to clear any error message on the car kit display
first.) Enter the correct passkey for the device you want to pair, and press
the Center Select key (
).
7. Select Yes to connect the devices. Once connected the Bluetooth
Connected icon
appears in the upper half of the display.
Bluetooth Settings
The Bluetooth wireless technology settings menu provides the ability to view and
change the device name, show the visibility, and set the security for the device.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
2
3. Press
Bluetooth Menu.
abc
85
Sounds Settings
4. Press the right soft key
Options. The Bluetooth menu displays with
the following options:
• My Phone Name: Allows you enter a customized name.
• Discovery Mode: Allows other users to see your accessibility. Select On for
other devices to see your device, or Off for no visibility.
Note: After selecting On, users have one minute to see your accessibility. After which Discovery Mode will
automatically default back to off.
• Supported Profiles: Displays a list of supported Bluetooth profiles. Highlight a
profile and press the Center Select key (
) to view a description.
• My Phone Info: Shows the handset information.
Sounds Settings
The Sounds menu provides the ability to access the following menus:
Call Sounds
Call Ringtones
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
3
3. Press
Sounds Settings.
def
1
4. Press
Call Sounds.
1
5. Press
Call Ringtone to choose:
• Preloaded ringtone(s)
• Custom ringtone(s)
1
-
-
Press
Get New Ringtones.
1
Press
Get New Applications. Select a ringtone app and press the
) to follow the on screen prompts.
Center Select key (
Note: Selecting an application can incur a fee.
2
6. Press
Call Vibrate to turn Call Vibrate On or Off. Highlight On or Off,
) to save the setting.
abc
and press the Center Select key (
Changing Your Settings 86
Alert Sounds
1. From the main screen, press the Center Select key (
2. Use the Navigation wheel to highlight Settings & Tools
).
and press the
Center Select key (
).
3
3. Press
Sounds Settings.
def
2
4. Press
Alert Sounds. For the following options, you can set the tone
abc
for the message alerts. You can also set vibration on and set a reminder.
• TXT Message: Allow you to set a notification for TXT message.
• Picture Message: Allow you to set a notification for Picture message.
• Voicemail: Allow you to set a notification for Voicemail Message.
• Device Connect: Allow you to set a notification when you connect to a device.
Keypad Sounds
Select the sound of the keypad when pressed.
1. From the main screen, press the Center Select key (
2. Use the Navigation wheel to highlight Settings & Tools
).
and press the
Center Select key (
).
3
3. Press
Sounds Settings.
def
3
4. Press
Keypad Sounds.
def
5. Use the Navigation wheel to select Default or Xylophone.
6. Press the Center Select key ( ) to set the new dial sound.
Keypad Volume
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
3
3. Press
Sounds Settings.
def
4
4. Press
Keypad Volume.
ghi
5. Use the Navigation wheel, or volume key to adjust the keypad volume.
6. Press the Center Select key ( ) SET to save.
87
Display Settings
Service Alerts
1. From the main screen, press the Center Select key (
2. Use the Navigation wheel to highlight Settings & Tools
).
and press the
Center Select key (
).
3
3. Press
Sounds Settings.
def
5
4. Press
Service Alerts. For the following options, you can turn the
jkl
Service Alert On or Off.
• ERI: Sounds an alert when you go into and out of your coverage areas.
• Minute Beep: While on a call your phone beeps after every minute of usage.
• Call Connect: Sounds an alert when a call is connected and when a call has
ended.
• Service Change: Allows you to turn the Service Change alert On or Off.
Power On/Off
1. From the main screen, press the Center Select key (
2. Use the Navigation wheel to highlight Settings & Tools
).
and press the
Center Select key (
).
3
3. Press
Sounds Settings.
def
6
4. Press
Power On/Off. You can set the sounds for Power On and
mno
Power Off to either On or Off.
Display Settings
The Display menu affects the menu style, main screen animation, backlight
settings, and more.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
4
3. Press
Display Settings.
ghi
4. Use the Navigation wheel to highlight the display menu that you wish to
edit, then press the Center Select key ( ).
5. Use the Navigation wheel to select an option and press the Center Select
key ( ).
Changing Your Settings 88
Banner
Banner allows you to create your own personalized greeting that appears in main
screen. Or you can display the network to which you are subscribed.
To create a personal banner:
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
4
3. Press
4. Press
5. Press
Display Settings.
ghi
1
Banner.
1
Personal Banner to create a customized banner for your
handset.
CLR
Note: Press and hold
to erase an existing banner, if necessary.
6. Enter a word or short phrase (18 characters or less) to appear in the main
screen.
7. Use the Navigation wheel to highlight the Select Text Color field and to
select White or Black.
8. Press the Center Select key (
) to save the new banner and text color.
To turn on an ERI banner:
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
4
3. Press
4. Press
5. Press
Display Settings.
ghi
1
Banner.
2
to set the ERI Banner for your handset.
abc
6. Select On or Off and press the Center Select key (
).
89
Display Settings
Backlight
Set the backlight for the display or keypad to remain on for a specified period of
time or to remain on as long as the swivel is open.
Note: Prolonged backlight use drains your battery faster.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
4
3. Press
Display Settings.
ghi
2
4. Press
Backlight.
abc
• Display: The following options are for the Main LCD.
-
Duration: Can be set to 7 seconds, 15 seconds, 30 seconds, Always On, or
Always Off.
-
Brightness: Use the Navigation wheel to adjust the brightness.
• Keypad: The following options are for the keypad.
-
-
-
-
-
7 Seconds: The keypad is on for 7 seconds.
15 Seconds: The keypad is on for 15 seconds.
30 Seconds: The keypad is on for 30 seconds.
Always On: The keypad is always on.
Always Off: The keypad is always off.
5. Use the Navigation wheel to highlight a menu.
6. Press the Center Select key (
) to enter the highlighted option’s menu
and change settings as desired.
Wallpaper
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
4
3. Press
Display Settings.
ghi
3
4. Press
Wallpaper.
def
5. Use the Navigation wheel to highlight your selection, then press the Center
Select key (
) to select the wallpaper that will appear in the display.
Changing Your Settings 90
Display Themes
1. From the main screen, press the Center Select key (
2. Use the Navigation wheel to highlight Settings & Tools
).
and press the
Center Select key (
).
4
3. Press
Display Settings.
ghi
4
4. Press
Display Themes.
ghi
5. Use the Navigation wheel to select Boom Box or Vivace display theme,
and press the Center Select key ( ).
Note: Press the left soft key
View to view the Display Theme. When viewing a Display Theme, use
the Navigation wheel to scroll through the themes. Press the left soft key
list.
List to return to the
Dial Fonts
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
4
3. Press
4. Press
5. Press
Display Settings.
ghi
5
Dial Fonts.
jkl
1
2
Style or
Size and press the Center Select key (
).
abc
• Style: Choose Normal, Rainbow, Quill Pen, or Sticky.
• Size: Choose Normal or Large Only.
6. Use the Navigation wheel to select a dialing font preference, then press the
Center Select key ( ).
Clock Format
This menu allows you to have time displayed in digital or analog format.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
4
3. Press
Display Settings.
ghi
6
4. Press
Clock Format.
mno
5. The following options appear in the display. Use the Navigation wheel to
select an options.
91
Phone Settings
• Digital: Time appears in digital format, for example, 12:54pm.
• Analog: Time appears in clock format. Digital format is still present in the
display.
• Off: No time is displayed.
6. Press the right soft key
Options to display the Options pop-up menu.
1
Press
Time & Date Color. Use the Navigation wheel to select Black
or White and press the Center Select key (
) to set the Time & Date
Color.
7. Press the Center Select key (
) to save.
Phone Settings
The Phone Settings menu provides the ability to access the following menus:
Standalone Mode
With Standalone Mode on, all RF functions for your phone are disabled, and you
cannot use your phone to place or receive calls.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
5
3. Press
Phone Settings.
jkl
1
4. Press
Standalone Mode. Use the Navigation wheel to select On or
).
Off and press the Center Select key (
Set Shortcut Keys
Shortcut Keys allows you to select from up to 18 applications that appear in the
display when you press the left/right/up/down directional keys on the Navigation
wheel from the main screen.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
5
3. Press
Phone Settings.
jkl
2
4. Press
Set Shortcut Keys.
abc
5. Use the Navigation wheel to select the directional key you want to change
and press the Center Select key ( ).
Changing Your Settings 92
5
Note: Press
Reset All to return to the Navigation wheel defaults settings. For default settings see
jkl
"Menu Navigation" on page 43.
6. Select a menu item and press the Center Select key (
Voice Commands
).
For more information, refer to "Voice Commands" on page 34.
Language
Change the display language from English to Spanish or vice versa using the
Language menu.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
5
3. Press
Phone Settings.
jkl
4
4. Press
Language.
ghi
5. Use the Navigation wheel to select English or Español, and press the
Center Select key ( ).
Location
Note: This feature is only available on the Verizon Wireless network.
The Location (GPS) setting identifies your location to the network. You can fully
enable this setting or set GPS to work only in the case that you dial 911 from your
phone.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
5
3. Press
Phone Settings.
jkl
Note: If you have set the Location Setting to "Lock Setting" via the Security Restrictions screen, you will
need to enter the Calls & Services Code to access this menu.
5
4. Press
Location. The following options appear in the display:
jkl
• Location On: GPS location setting is on wherever the feature is available.
• E911 Only: GPS location setting is on whenever you dial 911 only.
5. Use the Navigation wheel to highlight an option.
93
Phone Settings
6. Press the Center Select key (
Security
) to select the highlighted setting.
The Security menu allows you to lock your phone, set restrictions, and other
security options.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
5
3. Press
Phone Settings.
jkl
6
4. Press
Security.
mno
5. Enter the Phone Lock Code (default code is your last 4 digits of your phone
number) and press the Center Select key (
). The following options
appear in the display:
• Edit Codes: Allows you to change the Lock Code for Phone Only or for Calls &
Services.
• Restrictions: Allows you to restrict the Location Setting (Lock/Unlock Setting),
Calls (Outgoing or Incoming calls), Messages (Outgoing or Incoming messages).
To access the restricted functions, the Calls & Services Code must be entered.
• Phone Lock Setting: Allows you to set the phone to Unlocked or lock the
phone On Power Up.
• Lock Phone Now: Allows you to temporarily lock the handset. The Phone Lock
Code must be entered to unlock the handset.
• Restore Phone: All settings are reset to factory default settings.
Lock Phone
Lock Phone restricts the use of your phone with the exception of outgoing calls to
911 or the contacts listed in your In Case of Emergency list (For more information,
refer to "Emergency Contacts and Your In Case of Emergency List" on page 65.)
Lock Phone allows you to answer calls, but to place calls (except to emergency
numbers) you have to unlock the phone.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
5
3. Press
Phone Settings.
jkl
6
4. Press
Security. You’re prompted to enter the lock code. The Phone
mno
Lock Code is the last four digits of your telephone number.
Changing Your Settings 94
5. Enter the Lock Code and press the Center Select key (
). Several
security menus appear in the display.
3
6. Press
Phone Lock Setting. The following options display:
def
• Unlocked: If locked, unlocks the device or phone, depending on your selection.
• On Power Up: The Phone Lock Code is required whenever you power up the
phone.
7. Use the Navigation wheel to select an option and press the Center Select
key (
Lock Phone Now
1. From the main screen, press the Center Select key (
2. Use the Navigation wheel to highlight Settings & Tools
).
).
and press the
Center Select key (
).
5
3. Press
Phone Settings.
jkl
6
4. Press
Security. You’re prompted to enter the Phone Lock Code . The
mno
default lock code is the last four digits of your telephone number.
5. Enter the Phone Lock Code, and press the Center Select key (
). The
Security menu appears.
4
6. Press
Lock Phone Now.
ghi
Your phone returns to the main screen. The Phone Lock Code is required
immediately to access any functions other than receive calls or make
emergency calls.
Restrict Access to Location Menu
With the Location "Lock Setting" enabled, the Calls & Services Code is required to
access the Phone Settings Location menu. This prevents anyone else from changing
the Location setting on the Phone Settings menu.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
5
3. Press
Phone Settings.
jkl
6
4. Press
Security. You’re prompted to enter the Phone Lock Code. The
mno
default Phone Lock Code is the last four digits of your telephone number.
5. Enter the Phone Lock Code then press the Center Select key (
). The
Security menu appears.
2
6. Press
Restrictions.
abc
95
Phone Settings
7. Enter the Calls & Services Code then press the Center Select key (
).
The default Phone Lock Code is the last four digits of your telephone
number.
1
8. Press
Location Setting. The following options appear in the display:
• Lock Setting: Restricts access to the Location menu.
• Unlock Setting: Opens access to the Location menu.
9. Highlight Lock Setting and press the Center Select key (
).
Restrict Calls
You may restrict incoming and/or outgoing calls to allow calls from/to Contacts Only,
or to Block All calls.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
5
3. Press
Phone Settings.
jkl
6
4. Press
Security. You’re prompted to enter the Phone Lock Code. The
mno
default Phone Lock Code is the last four digits of your telephone number.
5. Enter the Phone Lock Code, then press the Center Select key (
). The
Security menu appears.
2
6. Press
Restrictions.
abc
7. Enter the Calls & Services Code, then press the Center Select key (
).
The default Calls & Services Code is the last four digits of your telephone
number.
2
8. Press
Calls.
abc
9. Highlight one of the following and press the Center Select key (
) to
select:
• Incoming Calls: Select from Allow All, Contacts Only, or Block All.
• Outgoing Calls: Select from Allow All, Contacts Only, or Block All.
Note: If Contacts Only is selected, the Contacts list cannot be modified until this setting is changed to Allow
All.
Note: If Block All is selected for Outgoing Calls, only emergency calls may be made.
Changing Your Settings 96
Restrict Messages
You may restrict incoming and/or outgoing messages to Block All messages.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
5
3. Press
Phone Settings.
jkl
6
4. Press
Security. You’re prompted to enter the Phone Lock Code. The
mno
default Phone Lock Code is the last four digits of your telephone number.
5. Enter the Phone Lock Code, then press the Center Select key (
). The
Security menu appears.
2
6. Press
Restrictions.
abc
7. Enter the Calls & Services Code, then press the Center Select key (
).
The default Calls & Services Code is the last four digits of your telephone
number.
3
8. Press
Messages.
def
9. Highlight one of the following and press the Center Select key (
) to
select:
• Incoming Messages: Select Allow All or Block All.
• Outgoing Messages: Select Allow All or Block All.
Edit Lock Codes
The default lock codes are the last four digits of your phone number. The Edit Code
function allows you to change the Phone Lock Code or the Calls & Services Code to
the code of your preference.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
5
3. Press
Phone Settings.
jkl
6
4. Press
Security. You’re prompted to enter the Phone Lock Code. The
mno
default Phone Lock Code is the last four digits of your telephone number.
5. Enter the Phone Lock Code and press the Center Select key (
). The
Security menu appears.
97
Phone Settings
1
6. Press
Edit Codes. The following options display:
• Phone Only: Allows you to edit the Phone Lock Code for only the handset.
• Calls & Services: Allows you to edit the Phone Lock Code for all Calls &
Services.
7. Highlight an option and press the Center Select key (
). If you selected
Calls and Services, you are prompted to “ENTER CURRENT CODE”. Enter
the current Calls & Services Code, and press the Center Select key (
).
8. At the “ENTER NEW CODE” prompt, enter the new Phone Lock Code and
press the Center Select key (
).
9. You’re prompted to confirm the new Phone Lock Code.
10. At the “RE-ENTER NEW CODE” prompt, re-enter lock code and press the
Center Select key (
).
11. “PHONE ONLY CODE SET” or “CALLS & SERVICE CODE SET” message
appears in the display confirming that your lock code was changed.
Note: Your phone does not allow you to view the lock code for obvious security reasons. If you change the
lock code, be sure to write down or memorize the new code.
Restoring Your Phone
Restore Phone returns all setup options to their factory default.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
5
3. Press
Phone Settings.
jkl
6
4. Press
Security, enter the Phone Lock Code and press the Center
mno
Select key (
).
5
5. Press
Restore Phone. A popup appears in the display asking if you
jkl
wish to “PERMANENTLY ERASE ALL USER DATA & RESET SETTINGS TO
FACTORY DEFAULTS?”
6. Highlight Yes and press the Center Select key (
). A popup appears in
the display, informing you to “PRESS *228 SEND AFTER POWER CYCLE
TO RE-PROGRAM PHONE”.
7. Press the Center Select key (
LOCK CODE”. Enter phone lock code , and press the Center Select key
) to restore phone.
), you are prompted to “ENTER PHONE
(
Changing Your Settings 98
Important!: After the phone power cycles back on, you must press *228 SEND to re-program your phone
number.
Call Emergency Numbers in Lock Mode
In Phone Lock Mode, you can dial 911 or the contacts listed in your In Case of
Emergency list to place an emergency call. (For more information, refer to
"Emergency Contacts and Your In Case of Emergency List" on page 65.)
Note: If you dial 911, your phone dials the emergency number immediately (no prompt).
System Select
The System Select menu allows you to set your roaming options. For more
information, refer to "Roaming Options" on page 32.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
5
3. Press
Phone Settings.
jkl
7
4. Press
System Select. The following options may appear in the
pqrs
display:
• Home Only
• Automatic, Automatic A, Automatic B (at least one of these options will
appear in the display)
Note: Contact your service provider for information regarding preferred systems.
Automatic settings are determined by the home location of the phone and the user’s price plan.
5. Make your selection and press the Center Select key (
NAM Selection
).
Your phone provides the option of selecting between two NAMs (Number Assignment
Modules) or phone numbers. Select either NAM1 or NAM2.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
5
3. Press
Phone Settings.
jkl
8
4. Press
NAM Selection. The following options appear in the display:
tuv
99
Phone Settings
• NAM Selection: Choose either NAM1 or NAM2.
• Auto NAM Selection: Choose either Enable or Disable.
5. Make your selection and press the Center Select key (
).
Quick Search
Quick Search is an easy way to locate contacts in your Address Book and Menu
items.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
5
3. Press
Phone Settings.
jkl
9
4. Press
Quick Search.
wxyz
5. Press the right soft key
Info to display detail information about Quick
Search. Press the Center Select key (
) to return to Quick Search
Menu.
6. Select On or Off and press the Center Select key (
).
Searching for a Contact
1. From the main screen, press the first three numeric keys that correspond
to the letters of the contacts name.
For example, to search for “Sally” you would enter:
7
2
5
pqrs
abc
jkl
S
A
L
2. Press the up Navigation wheel to search for Contacts. If a match is found,
the name(s) appear in the display.
sEND
3. Press the
key to call the contact.
Changing Your Settings 100
Searching for a Menu Item
1. From the main screen, press the first three numeric keys that correspond
to the letters of the Menu item name.
For example, to search for “Inbox” you would enter:
4
6
2
ghi
mno
abc
I
N
B
2. Use the Navigation wheel to search for Menu items. If a match is found, the
menu item(s) appear in the display.
3. Press the Center Select key (
) to access the content of the menu item.
Call Settings
The Call Settings menu allows you to select the method for answering incoming
calls, setting redial options, setting data options, voice privacy, and more.
Answer Options
The Answer Options menu allows you to select the method for answering incoming
calls.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
6
3. Press
Call Settings.
mno
1
4. Press
Answer Options. The following options appear in the display:
• Swivel Open: Calls are answered when the swivel is opened.
END
• Any Key: Calls are answered when any key is pressed except
. If you press
END
it will ignore the call and send it to voicemail.
• Auto w/ Handsfree: Calls are answered automatically with a 5 second delay.
5. Use the Navigation wheel to highlight the method you wish to use for
answering calls, then press the Center Select key (
) MARK.
Mark All to select all options.
Done.
6. Press the right soft key
7. Press the left soft key
101
Call Settings
Auto Retry
Auto Retry automatically redials voice/data calls after a preset period of time.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
6
3. Press
Call Settings.
mno
2
4. Press
Auto Retry. The following options appear in the display:
abc
• Off
• Every 10 Seconds
• Every 30 Seconds
• Every 60 Seconds
5. Use the Navigation wheel to select an option and press the Center Select
key (
).
TTY Mode
Before you can use your phone with a TTY device, you’ll need to enable TTY
functions in the phone. For more information, refer to "TTY" on page 33.
One Touch Dial
You can use this option to enable or disable the speed dialing feature.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
6
3. Press
Call Settings.
mno
4
4. Press
One Touch Dial. Select On or Off and press the Center Select
ghi
key (
).
For more information, refer to "Speed Dialing" on page 64.
Changing Your Settings 102
Voice Privacy
Note: This feature is only available on the Verizon Wireless network.
Voice Privacy when enabled turns on advanced voice encryption. Voice
privacy can be set to On or Off.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
6
3. Press
Call Settings.
mno
5
4. Press
Voice Privacy. The following options appear in the display:
jkl
• On
• Off
5. Use the Navigation wheel to select an option and press the Center Select
key (
).
DTMF Tones
Use this menu to set DTMF settings to Normal, or Long.
1. From the main screen, press the Center Select key (
2. Use the Navigation wheel to highlight Settings & Tools
).
and press the
Center Select key (
).
6
3. Press
Call Settings.
mno
6
4. Press
DTMF Tones. The following options appear in the display:
mno
• Normal: Select for a normal tone.
• Long: Select for an extended tone.
5. Use the Navigation wheel to select an option and press the Center Select
key (
).
103
Memory
Memory
The Memory menu allows you to view the memory usage for pictures, sounds, and
ringtones on your phone.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
7
3. Press
Memory.
pqrs
1
4. Press
Phone Memory. The following options are available:
-
Memory Usage: Displays the current memory usage and allocation figures for
the various applications and folders stored on the phone. These include: Total
Used, Available, My Pictures, My Ringtones, My Sounds, Applications, and
Picture Msg.
-
-
-
My Pictures: Pictures you have saved from a Picture message, downloaded
via the “Get It Now” application, or taken using your phone.
My Ringtones: Ringtones you have downloaded via the “Get It Now”
application.
My Sounds: Sounds you have downloaded, recorded using your phone, or
saved from a Picture message with Sound attached.
2
5. Press
Music Memory to view the Available, Used and Total
abc
memory usage for music files.
Phone Info
The Phone Info menu allows you to view the software and hardware information,
your assigned number, and an icon glossary for your phone.
1. From the main screen, press the Center Select key (
).
2. Use the Navigation wheel to highlight Settings & Tools
and press the
Center Select key (
).
8
3. Press
Phone Info.
tuv
1
4. My Number is highlighted. Press
My Number to display the Mobile
Device and Identification numbers.
2
5. Press
SW Version to view the version of Software, PRL, ERI,
abc
Get it Now, MSUI, Hardware, and MEID on your phone.
3
6. Press
Icon Glossary to view the list of icons with a brief description.
def
7. Press the Center Select key (
) to return to the Phone Info menu.
Changing Your Settings 104
Section 9: Music
Topics Covered
•
•
My Music
Sync Music
This section explains how the Music Player functions.
My Music
Your Music Player can be used to play music files that you have transferred from
your PC using V CAST Music Manager. Music can be played with the swivel open or
closed. Your Juke Music Player can play music in the following Digital Audio
Formats:
• AAC and AAC+
• WMA and WMA Pro • MP3
Sync Music
Download music to your PC using V CAST Music Manager
1. Open V CAST Music Manager. Don't have V CAST Music Manager?
Download it for free at www.verizonwireless.com/musicmanager.
2. Select the Buy Music tab.
3. Log in.
4. Go to My Purchases.
5. Songs that you’ve purchased but have not yet downloaded are indicated by
an icon in the “d/l” column on the right-hand side of the song list.
6. Check the box(es) of songs you wish to download.
7. Select Download.
8. To play the song, you can find it by selecting the Music On My PC tab.
Note: V CAST Over The Air Music downloads are not available on the Juke. Music can be purchased and
downloaded via V CAST Music Manager through your PC. V CAST Music will work with Windows XP,
Windows Vista and Windows Media Player 10 or higher. Mac OS operating system is not supported.
105
My Music
Sync Music from your PC to your device using V CAST
Music Manager
This option allows you to transfer music files from your PC. In order to use this
option, you must load V CAST Music Manager on your PC.
1. Plug in the USB cable to your phone and connect it to a USB port on your
PC.
2. The Portable Device window display on your PC. Select Synchronize your
music using V CAST Music Manager (
) icon and click OK.
3. With V CAST Music Manager opened on your PC, click the Sync List button
) on the bottom bar. Drag and drop your music selection(s).
4. Press the Sync Now button ( ).
(
5. When synchronization is complete, disconnect the USB cable. To return to
END
the main screen, press the End/Power key (
).
Music 106
Music Player
1. Indicator
2. Volume
Indicator
My Music
Options
8. Visual
Guide
3. File Name
Because
Carol
4. Artist
5. Progress
00:09:48
00:20:30
Bar
6. Elapsed Time/Total Time
7. Play Mode
Music Player Icons
Sync Music: Indicates that music is being synchronized between your
computer and your phone.
Paused: Indicates that music playback has been paused while phone is
open and incoming call is received.
Indicates that music is playing while the phone is open.
Play:
Shuffle: Indicates that music will play in a re-sorted playlist order.
Repeat One: Indicates the selected song will repeat.
1
Repeat All: Indicates all music in current playlist will repeat in list order.
Shuffle Repeat All: Indicates all music will repeat in a re-sorted
playlist order.
107
Music Player
Opening the Music Player
With the swivel closed, press and hold the Center Select key (
ᮣ
).
Using the Navigation Wheel and Center Select Key
MY MUSIC
To scroll through My Music menus
Back
All
15
2
Sub menus and Options, turn the
Navigation Wheel clockwise to scroll
down or couter clockwise to scroll up.
VIEW
Playlists
Artists
Genres
7
3
MY MUSIC
Back
All
15
2
To view the highlighted menu selection,
press the Center Select key VIEW.
VIEW
VIEW
Playlists
Artists
Genres
7
3
To move Back a menu item press the
Navigation Wheel Up.
ARTISTS
Back
BAC
Carol
David
VIEW
Pat
Wendy
Genres
3
When playing music, press the Navigation
Wheel Up, for My Music to return to Music
Player home screen.
My Music
Options
Because
Carol
Press the Center Select key:
• To Play or Pause music.
00:09:48
00:20:30
Press the Navigation Wheel right:
• A long press to fast forward or rotate the
Navigation Wheel clockwise to fast forward.
• A short press to move forward one complete
song.
Press the Navigation Wheel left:
• A long press to rewind or rotate the
Navigation Wheel counter clockwise to rewind.
• A short press to move back one complete
song.
Press the Navigation Wheel down Options:
• To display additional options.
Music 108
Operating the Music Player
1. With the phone’s swivel closed and the Music Player opened, the following
items may appear in the display:
• Resume: Allows you to resume music playback at the point where music
was last stopped.
Note: The Resume list is deleted when Music Sync is performed. You will have to make your music
selection again.
• All: Allows you to view and play all of your songs in list order.
• Playlists: Any playlists that you have created are displayed in this option.
• Artists: Allows you to view and play your songs by artist.
• Genres: Allows you to view and play your songs by music type (genre). For
example, Folk, Rock, Country, Classical, Soul, Unknown and so on. Each folder
will contain all songs within that genre.
• Albums: Allows you to view and play your songs by album title. Even if you only
have one song from an album, a folder for the album will display.
Note: The number listed outside the options denotes the number of item listed under the option.
2. Press the Navigation wheel up to go Back to the previous menu, or press
the Center Select key (
) to VIEW the items listed under the option
highlighted.
3. Rotate the Navigation wheel to highlight a category or song, and press the
Center Select key ( ) to VIEW your selection.
4. Once a song is highlighted (indicated by music notes to the left of the title),
press the Center Select key ( ) to PLAY the song.
Note: With the swivel open, your music will continue to play in the background and the Play icon (
)
appears on the top line of the display.
Important!: Music will pause when you receive an incoming call and the Pause icon (
) appears on the
top line of the display. Music playback will resume when the call ends.
Note: Music will stop when you do any of the following:
Place an outgoing call
Launch an application (i.e., games, speech recognition)
Sync Music
109
Music Player Options
Stopping the Music Player
Method 1 (Swivel Closed)
To stop the Music Player when the swivel is closed, and with the music player in
operation, press and hold the Center Select key (
).
Method 2 (Swivel Open)
To stop the Music Player when the swivel is opened, and with the music player in
END
operation, press
from the main screen.
Music Player Options
While the Music Player screen is displaying, press the Navigation wheel down to see
the following Options. Rotate the Navigation wheel left or right to scroll through the
options, and press the Center Select key (
) to select it.
• Play Mode: Normal, Shuffle, Repeat One, Repeat All, Shuffle Repeat All.
• Add To Playlist: Add current playing song to playlist.
• Skin: Select Simple, Album Artwork, Visualizer, Lyrics.
• Equalizer: Select Basic, Rock, Jazz, Live, Classic, Full Bass, Full Bass and Treble,
Dance, Pop, Full Treble, Club, Party, Large Hall, Soft, Soft Rock, User Setting.
• 3D Sound: Select Wide, Dynamic, Surround, Off.
• Backlight: Select 15 Seconds, 30 Seconds, 1Minute.
• Song Info: Displays song information.
• Memory Info: Displays available, used and total memory for song storage.
Music 110
Playlist
Creating a Playlist
1. With the swivel closed, from the main screen, press and hold the Center
Select key ( ). The Music Player is now active.
2. Rotate the Navigation wheel to highlight Playlists and press the Center
Select key ( ) VIEW.
3. Press the Navigation wheel down to open Options.
4. Add New Playlist is highlighted, press the Center Select key (
). The
OPEN PHONE TO CONTINUE pop up displays.
5. Open the swivel, and use the alphanumeric keypad to enter a name for
CLR
your playlist and press the Center Select key (
). Press
to remove
unwanted text.
6. Press the left soft
key to change Text Entry mode.
7. Close the swivel to view your new playlist.
Adding a Song to a Playlist
1. With the swivel closed, from the main screen, press and hold the Center
Select key ( ). The Music Player is now active.
2. Rotate the Navigation wheel to highlight All and press the Center Select
key ( ) to VIEW the songs.
3. With Play All Songs highlighted, press down on the Navigation wheel to
open Options.
4. Highlight Add To Playlist and press the Center Select key (
).
5. To select all songs- highlight Mark All and press the Center Select key
(
). A check mark displays beside each song.
-or-
To select a specific song - use the Navigation wheel to highlight the song
and press the Center Select key (
). A check mark displays beside the
selected song.
6. Press the Navigation wheel down when Done.
7. Rotate the Navigation wheel to highlight the name of the Playlist to which
you wish to add the song, and press the Center Select key (
).
111
Playlist
Changing Song Order in a Playlist
1. With the swivel closed, from the main screen, press and hold the Center
Select key ( ). The Music Player is now active.
2. Rotate the Navigation wheel to highlight Playlists and press the Center
Select key ( ).
3. Highlight a Playlist.
4. Press down on the Navigation wheel to open Options.
5. Highlight View and press the Center Select key (
6. Press down on the Navigation wheel to open Options.
7. Highlight Reorder and press the Center Select key (
).
).
8. Highlight the song you would like to move and press the Center Select key
). A checkmark displays.
(
9. Press Navigation wheel up to move the selection up in the song order or
press the Navigation wheel down to move the selection down in the song
order.
10. Press the Center Select key (
) when Done.
11. Repeat step 6-10 if needed.
Deleting a Playlist
1. With the swivel closed, from the main screen, press and hold the Center
Select key ( ). The Music Player is now active.
2. Rotate the Navigation wheel to highlight Playlists and press the Center
Select key ( ) VIEW.
3. Highlight the name of the playlist to be deleted and Press down on the
Navigation wheel to open Options.
4. Highlight Remove and press the Center Select key (
). The Remove
popup displays.
5. With Yes highlighted, press the Center Select key (
) to confirm the
removal of the playlist.
-or-
Rotate the Navigation wheel to highlight No to cancel and press the Center
Select key ( ).
Note: Only the Playlist is deleted. But the songs will not be deleted from the Music Player.
Music 112
Deleting Songs from the Music Player
1. Plug in the USB cable to your phone and connect it to a USB port on your
PC.
2. The Portable Device window display on your PC. Select Synchronize your
music using V CAST Music Manager (
) icon and click OK.
3. With the V CAST Music Manager opened on your PC, click the Music on
My Phone tab.
4. Right click on the song title, and select Delete.
5. You will be prompted “Are you sure that you want to delete ...?”
6. Click OK, the song will be deleted from the Music Player.
7. When finished, remove the USB cable.
113
Deleting Songs from the Music Player
Music 114
Section 10: Get It Now
Topics Covered
•
•
•
•
•
•
Get It Now
Tune & Tones
Pictures
Games
Tool on the Go
Extras
This section describes how to receive tones, and images. It also outlines how to take
and store images, sounds, and ringtones using your phone.
Get It Now
The Get It Now menu provides sub-menus to Tunes & Tones, Pictures, Games,
Tools on the Go and Extras. You can also view memory info to see how much space
you’ve used (and have left) for stored media. Use the following steps for each GET IT
NOW sub-menu.
1. From the main screen, use the Navigation wheel to access the GET IT NOW
menu.
2. Press the right soft key
Info.
1
3. Press
App. Memory to display the memory available. Press the
CLR
key to return.
2
abc
4. Press
Phone Memory to view the internal memory availability. Press
CLR
the
key to return.
3
5. Press
View Log to see the file transfer activity.
def
CLR
6. Press the
key to return.
4
7. Press
ghi
Help to display a list of frequently asked questions. Use the
Navigation wheel to highlight an item and press the Center Select key
(
) to display help text.
CLR
8. Press the
key to return.
115
Tunes & Tones
Tunes & Tones
This menu allows you to get new tunes and tones, record new sounds, and set tunes
and tones as your ringtone.
Get New Ringtones
You can use this option to download new ringtones from the Internet.
1. From the main screen, use the Navigation wheel to access the GET IT NOW
menu.
1
2. Press
3. Press
4. Press
Tunes & Tones.
1
1
Get New Ringtones.
Get New Applications.
5. You are connected to the Get It Now store and presented with available
provider ringtone applications.
END
6. To return to the main screen, press
.
My Ringtones
1. From the main screen, use the Navigation wheel to access the GET IT NOW
menu.
1
2. Press
Tunes & Tones.
2
3. Press
My Ringtones.
abc
4. Use the Navigation wheel to highlight a ringtone.
5. Press the Center Select key (
) to Play the highlighted ringtone.
6. Press the left soft key
Set As to set the ringtone as a Ringtone,
Contact ID, or Alert Tones.
Press the right soft key
ringtone.
Info to view detailed information about the
END
7. To return to the main screen, press
.
Get It Now 116
My Sounds
1. From the main screen, use the Navigation wheel to access the GET IT NOW
menu.
1
2. Press
Tunes & Tones.
3
3. Press
My Sounds.
def
4. Record New is highlighted. Press the Center Select key (
) to launch
the RECORD NEW screen.
5. Press the left soft key
RecMode to select a recording mode and
press the Center Select key (
). Select one of the following:
• Limit for Pic Msg: Records a 60 sec message.
• Normal: Records for an extended message.
6. Press the Center Select key (
) REC to begin recording. Press the left
soft key Pause to pause and resume the recording appropriately.
7. Press the Center Select key (
) STOP to stop and save the message
automatically to My Sounds.
Pictures
This menu allows you to get new Pictures via the Get It Now store or take new
Pictures using your phone’s camera. You can also view the saved pictures.
Get New Pictures
1. From the main screen, use the Navigation wheel to access the GET IT NOW
menu.
2
2. Press
3. Press
4. Press
Pictures.
abc
1
Get New Picture.
1
Get New Applications. Follow the on-screen prompts.
117
Pictures
My Pictures
My Pictures allows you to review the pictures taken with the camera feature or
downloaded and stored into your phone.
1. From the main screen, use the Navigation wheel to access the GET IT NOW
menu.
2
2. Press
Pictures.
abc
2
3. Press
My Pictures.
abc
4. Use the Navigation wheel to select a photo, and press the Center Select
key (
) VIEW to view the highlighted picture. Press the left soft key
Erase to erase the highlighted image. Press the right soft key
Options to select from the following options:
• Send: Launches the Create Picture Message screen.
• Set As: Set the picture as the Wallpaper, or Picture ID.
• To PIX Place: Sends picture to PIX Place
• Take Picture: Activates the camera.
• Get New Picture: Allows you to get pictures from Get New Applications.
• Slide Show: Allows you to view in a series of pictures.
• Edit: Allows you to edit the photo.
• Rename: Allows you to rename the picture.
• Lock/Unlock: Locks the picture to prevent deletion.
• Erase Files: Allows you to erase pictures.
• File Info: Provides the file name, date, time, resolution, size and rights to the
selected picture.
5. Use the Navigation wheel to make your selection and press the Center
Select key (
).
Take Picture
This menu launches the camera.
1. From the main screen, use the Navigation wheel to access the GET IT NOW
menu.
Tip: Alternatively to launch the camera, press Camera Key (
).
2
2. Press
Pictures.
abc
3
3. Press
Take Picture. The camera is now active.
def
Get It Now 118
4. Press the right soft key
settings. Use the Navigation wheel to highlight the desired setting
category, and press the Center Select key ( ). Use the Navigation
Options, to choose the specific camera
wheel to make selections within each category. The following categories
are available:
• Resolution: Select High (640X480), Med (320X240), Low (160X120)
• Night Shot: Select On or Off.
• Self Timer: Select Off, 5 Sec., 10 Sec.
• White Balance: Select Auto, Sunny, Cloudy, Tungsten, or Fluorescent.
• Quality: Select Economy, Normal, Fine
• Ready Sound: Select Off, Say Cheese!, Look Here!, 1, 2, 3!
• Shutter Sound: Select Shutter, Okay, Chime or No Sound.
• Color Effects: Select Normal, Black&White, Sepia, Negative, Emboss, Green,
or Aqua.
• Preview Mode: Select Full Screen or Standard Screen
5. Press the Center Select key (
) TAKE to capture a picture.
• Press the Center Select key (
) SEND to create a New Picture Message
• Press the right soft key
• Press the left soft key
Erase to delete the picture.
Save to save the picture to the galley.
END
6. To exit the camera, press
.
119
Games
Games
Select from several fun and interesting applications or a broad category of games
that you can play on your phone.
1. From the main screen, use the Navigation wheel to access the GET IT NOW
menu.
3
2. Press
Games.
def
1
3. Press
Get New Applications.
4. Use the Navigation wheel to make a selection and press the Center Select
key ( ).
5. Choose the charge Either Subscription or Unlimited, then press the Center
Select key (
). Follow in screen prompts to apply.
Tools on the Go
Download applications that keep you in touch with the world, keep you organized,
and help you find the coolest spots.
1. From the main screen, use the Navigation wheel to access the GET IT NOW
menu.
4
2. Press
Tools on the Go.
ghi
3. Get New Applications is highlighted. Press the Center Select key (
).
4. Highlight the application you wish to download and press the Center
Select key (
5. Follow on screen subscription prompts and press the Center Select key
). The download process begins.
).
(
6. At the “App installed successfully. Would you like to run it?” prompt, press
Yes to launch application, or No to return to category list.
Note: The Tools on the Go menu will display all downloaded applications, with the most current download
first.
Get It Now 120
Extras
1. From the main screen, use the Navigation wheel to access the GET IT NOW
menu.
5
jkl
2. Press
Extras.
3. Get New Applications is highlighted.
4. Press the Center Select key ( ).
5. Highlight the application you wish to download and press the Center
Select key ( ).
6. Follow on screen subscription prompts and press the Center Select key
). The download process begins.
(
7. At the “App installed successfully. Would you like to run it?” prompt, press
Yes to launch application, or No to return to category list.
121
Voice Commands
Section 11: Tools
Topics Covered
•
•
•
•
•
•
•
Voice Commands
Calculator
Calendar
Alarm Clock
Stop Watch
World Clock
Notepad
The topics covered in this section allow you to schedule appointments, view the
calendar, set an alarm, view time zones, take notes, and perform simple math
calculations
Voice Commands
For more information, refer to "Voice Commands" on page 34.
Calculator
You can perform calculations, including addition, subtraction, multiplication and
division using your phone.
1. From the Main screen, press the Center Select key (
) MENU.
and then
2. Use the Navigation wheel to highlight Settings & Tools
press the Center Select key (
).
1
2
1
3. Press
Tools,
Calculator,
Normal. The Calculator opens.
abc
4. Enter the first number in your equation using the keypad. (Numbers can be
up to nine digits long.)
5. Press the right soft key
Operator to display a pop-up menu which
allows you to enter a Parenthesis or Power if desired.
CLR
6. Press the left soft key
Clear to clear all data entered or press
to
delete one character at a time.
#
7. Press
to change the sign for a number to a negative.
to add a decimal point.
8. Press the
Tools 122
9. Use the navigation directional keys to set the type of calculation that you
wish to perform. Your choices are as follows:
• Up key: [+] Addition
• Down key: [-] Subtraction
• Right key: [x] Multiplication
• Left key: [÷] Division
10. Use the keypad to enter the second number into your equation.
11. Press the Center Select key (
) to perform the calculation and view the
result.
Tip
Calculates the tip and determine how much each person should pay for the meal.
1. From the Main screen, press the Center Select key (
) MENU.
and then
2. Use the Navigation wheel to highlight Settings & Tools
press the Center Select key (
).
1
2
2
3. Press
Tools,
Calculator,
Tip. The Tip Calculator opens.
abc
abc
4. Populate the following fields:
• Bill: enter the amount of the bill.
• Tip: enter the tip percentage.
• # Paying: enter the amount of people paying.
Note: Press the
key to enter a decimal point.
5. In the section below, the calculator will automatically display the Tip, total
bill including the tip, and the share of the bill for each person.
Converter
The Converter menu provides the following conversion categories:
• Temperature
• Length
• Weight
• Area
• Volume
• Currency
1. From the Main screen, press the Center Select key (
2. Use the Navigation wheel to highlight Settings & Tools
) MENU.
and then
press the Center Select key (
).
123
Calendar
1
2
3
3. Press
4. Scroll to the conversion feature you wish to use and press the Center
Select key ( ).
Tools,
Calculator,
Converter.
abc
def
5. Use the Navigation wheel to select the From units of money or measure
for the quantity you want converted.
6. Enter the quantity you want converted in the text box.
#
Note: Press the
key to enter a decimal point. Press
to change the sign for a number to a
negative.
Use the Navigation wheel to select the To units of money or measure for the
quantity you want converted.
Calendar
Schedule up to eight events for any day by indicating each event’s start and end
time. Set alarms for events so that you can be alerted before an event takes place.
Events scheduled for future dates automatically appear on your Today events
schedule for the present day.
Add a new event
1. From the Main screen, press the Center Select key (
) MENU.
and then
2. Use the Navigation wheel to highlight Settings & Tools
press the Center Select key (
).
1
3
3. Press
Tools,
Calendar. A calendar appears in the display with
def
the current date highlighted.
Note: From the main screen, press the Navigation wheel down to access the Calendar. The calendar
appears in the display with the current date highlighted. If you change the shortcut to another
function, then proceed with the first two steps.
4. To view available options, press the right soft key
Options. A pop-up
menu appears in the display that contains the menu items.
• Go To Date: Go to any date that you specify.
• Go to Today: Go to today on monthly calendar.
• Erase Old: Select a past event to delete.
• Erase All: Delete all events in your calendar
5. Press the left soft key
Add to add a new event.
Tools 124
6. The Appointment name field is highlighted. Enter the name and press the
Navigation wheel down to move to the following fields:
• Start Date: Enter the start date for the event.
• Start Time: Enter the start time for the event.
-
am/pm: Select from am or pm for the start time.
• End Date: Enter the end date for the event.
• End Time: Enter the end time for the event.
-
am/pm: Select from am or pm for the end time.
• Recurrence: Select the frequency of the event.
• Alert: Sets the alarm for the event. Select from Tone, Vibrate, or Light Only.
• Reminder: Set a reminder before the event. Select Off, Once, Every 2 Minutes,
Every 15 Minutes.
• Alert Time: Set the Alert Time to sound before the event takes place.
7. Fill in and select event details using the Navigation wheel and the
alphanumeric keypad.
8. Press the Center Select key (
). The event is saved.
View an event
1. From the Main screen, press the Center Select key (
) MENU.
and then
2. Use the Navigation wheel to highlight Settings & Tools
press the Center Select key (
).
1
3
3. Press
Tools,
Calendar. A calendar appears in the display with
def
the current date highlighted.
Note: From the main screen, press the Navigation wheel down to access the Calendar. The calendar
appears in the display with the current date highlighted. If you change the shortcut to another
function, then proceed with the first two steps.
4. If you want to view events for a date other than today, press the right soft
key
• In the pop-up menu that appears in the display, use the Navigation wheel to
highlight Go To Date, then press the Center Select key ( ).
• Enter the desired date in the box, then press the Center Select key (
Options.
).
The monthly calendar for the date that you entered appears in the display with
the event date highlighted.
5. Press the Center Select key (
) VIEW to view event.
6. Press the Center Select key (
) VIEW to view event details for the date.
125
Alarm Clock
7. To edit the event being viewed, press the left soft key
Edit. Use the
Navigation wheel to highlight the field(s) that needs to be edited. Make
changes, then press the Center Select key ( ) SAVE.
8. Press the right soft key
Options. A pop-up menu appears in the
display.
1
• To see the selected date in a month view, press
• To erase the current event, press
Monthly.
2
Erase. A pop-up menu appears with
abc
Yes highlighted. press the Center Select key (
) to erase, or highlight No
to cancel and press the Center Select key (
).
3
• To erase all calendar events, press
Erase All. In the pop-up menu that
def
appears, highlight Yes to erase all events, or highlight No to cancel and return to
the calendar, and press the Center Select key ( ).
Alarm Clock
Your phone has an alarm clock that can be set to go off once, or recur daily at a
specific time. Once set, the alarm clock is easy to change or turn off.
Set An Alarm
1. From the Main screen, press the Center Select key (
) MENU.
and then
2. Use the Navigation wheel to highlight Settings & Tools
press the Center Select key (
).
1
4
3. Press
Tools,
Alarm Clock. The Alarm Clock menu displays
ghi
with the Alarm 1 highlighted.
4. The following options appear in the display:
• Alarm 1
• Alarm 2
• Alarm 3
5. Use the Navigation wheel to highlight the alarm that you wish to enable,
then press the Center Select key (
). The Set Alarm (1, 2, or 3
depending on your selection) screen appears in the display.
6. The Alarm field is highlighted. Use the Navigation wheel to select On or Off.
7. Use the Navigation wheel to highlight the Time field, then enter the time
that you wish for the alarm to sound.
8. Use the Navigation wheel to highlight the am/pm field and to select am or
pm.
Tools 126
9. Use the Navigation wheel to highlight the Frequency field and to set the
frequency (occurrence) of the alarm. Below lists and defines the options for
this field.
• Once: The alarm sounds only once, at the time specified.
• Daily: The alarm sounds every day at the time specified.
• Mon-Fri: The alarm sounds Monday through Friday at the time specified.
• Weekends: The alarm sounds Saturday through Sunday at the time specified.
10. Use the Navigation wheel to highlight the first Ringer field and to set the
ringer to Tone, Vibrate, or Light Only.
11. If you selected Tone, use the Navigation wheel to highlight the second field
to set the alert tone to VZW Default Tone, or select a tone from Alert Tone.
12. When all fields have correct information entered, press the Center Select
key (
) SAVE to save your settings.
Disable an alarm before it sounds
1. From the Main screen, press the Center Select key (
2. Use the Navigation wheel to highlight Settings & Tools
) MENU.
and then
press the Center Select key (
).
1
4
3. Press
Tools,
Alarm Clock. The Alarm Clock menu displays
ghi
with the Alarm 1 highlighted.
4. Use the Navigation wheel to highlight the alarm you wish to disable, then
press the right soft key
Options. A pop-up menu appears in the
display.
1
2
5. Press
Turn Off to turn the highlighted alarm off. Press
Reset to
abc
3
reset the highlighted alarm or press
alarms.
Reset All to reset all of the
def
127
Stop Watch
Snooze
When an alarm sounds, a menu screen displays that allows you to either turn the
alarm off or to have the alarm ring again after 5 minutes. This is called Snooze.
To use this feature follow these steps:
1. Set one of your phone’s 3 alarms. For more information, refer to "Set An
Alarm" on page 126.
2. When an alarm sounds, press Navigation wheel up or down to highlight
Snooze or Dismiss. To snooze, highlight Snooze and press the Center
Select key (
) to set it to ring again after 5 minutes. Or, highlight
Dismiss to turn the alarm off completely. The alarm turns off and the main
screen displays.
Stop Watch
This feature allows you to use a stop watch. Press the Center Select key (
)
START to start the stop watch. Press the Center Select key (
stop watch. Press the right soft key
) STOP to stop the
Reset to erase recorded stop watch time.
1. From the Main screen, press the Center Select key (
) MENU.
and then
2. Use the Navigation wheel to highlight Settings & Tools
press the Center Select key (
).
1
5
3. Press
display.
Tools,
Stop Watch. The Stop Watch appears in the
jkl
4. Press the Center Select key (
) START to start the stop watch.
Record to record split times.
5. Press the left soft key
6. Press the Center Select key (
7. Press the right soft key
) STOP to stop the stop watch.
Reset to erase recorded stop watch time.
Tools 128
World Clock
World Clock allows you to view the time of day or night in any part of the world.
1. From the Main screen, press the Center Select key (
) MENU.
and then
2. Use the Navigation wheel to highlight Settings & Tools
press the Center Select key (
).
1
6
3. Press
Tools,
World Clock.
mno
4. Use the left soft key
Cities to display the 45 supported cities. Press
the Center Select key (
) to see that city's current time.
5. Press the right soft key
Options to view the following options:
• Set As Local Time: Sets the time according to the city chosen in the Cities field.
• DST On: Sets the Daylight Savings time option.
6. You can scroll through other cities by pressing the Navigation wheel.
END
7. To return to the main screen, press
.
Notepad
Create and store notes in Notepad. Return to Notepad anytime to review and edit
your notes.
1. From the Main screen, press the Center Select key (
) MENU.
and then
2. Use the Navigation wheel to highlight Settings & Tools
press the Center Select key (
).
1
7
3. Press
Tools,
Notepad.
pqrs
4. If you have any stored notes, they appear as a list in the display. If this is
your first time in Notepad, No Notes displays.
5. To add a new note, press the left soft key
Add, then enter the note
using the keypad.
6. While entering a note, press the left soft key
Abc, to display a pop-up
menu with the following text entry modes
• Word
• Abc
• ABC
• 123
• Symbols
Tip: Press and hold * (
) to cycle through text entry mode types (word, Abc, and 123).
Press * ( ) to cycle between lower case, all caps, and initial caps.
129
Notepad
7. Use the Navigation wheel to select a text entry modes and press the
CLR
Center Select key (
8. When you’re finished entering details for the note, press the Center Select
key ( ). The note is saved.
) or press
to exit the pop-up menu.
Review, Edit, and Erase Notes
1. From the Main screen, press the Center Select key (
) MENU.
and then
2. Use the Navigation wheel to highlight Settings & Tools
press the Center Select key (
).
1
7
3. Press
Tools,
Notepad. The Notepad menu opens. If you have
pqrs
any stored notes, they appear as a list in the display.
4. With a note highlighted, press the right soft key
Options. A
pop-up menu with the options listed in the following table appears in the
display:
• Edit: Edit the note currently highlighted or appearing in the display.
• Erase: Erase the note currently highlighted or appearing in the display.
• Erase Notes: Erase notes marked with a checkmark.
• Lock/Unlock: Locks or unlocks the entry to prevent accidental deletion.
CLR
5. Use the Navigation wheel to highlight an option or press
to exit the
pop-up menu.
6. Press the Center Select key (
) to perform the highlighted option’s
function.
Tools 130
Section 12: Health and Safety Information
Topics Covered
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Health and Safety Information
Samsung Mobile Products and Recycling
UL Certified Travel Adapter
Consumer Information on Wireless Phones
Road Safety
Responsible Listening
Operating Environment
Using Your Phone Near Other Electronic Devices
Potentially Explosive Environments
Emergency Calls
FCC Notice and Cautions
Other Important Safety Information
Product Performance
Availability of Various Features/Ring Tones
Battery Standby and Talk Time
Battery Precautions
Care and Maintenance
This section outlines the safety precautions associated with using your phone. These
safety precautions should be followed to safely use your phone.
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the exposure limits for radio frequency (RF) energy set
by the Federal Communications Commission (FCC) of the U.S. government.
131
Health and Safety Information
These FCC exposure limits are derived from the recommendations of two expert
organizations, the National Counsel on Radiation Protection and Measurement
(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific and engineering
experts drawn from industry, government, and academia after extensive reviews of
the scientific literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of
the rate of absorption of RF energy by the human body expressed in units of watts
per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit
of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a
substantial margin of safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions accepted by the FCC
with the phone transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power level, the
actual SAR level of the phone while operating can be well below the maximum value.
This is because the phone is designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in positions and locations (e.g. at
the ear and worn on the body) as required by the FCC. For body worn operation, this
phone has been tested and meets FCC RF exposure guidelines when used with an
accessory that contains no metal and that positions the handset a minimum of
1.5 cm from the body. Use of other accessories may not ensure compliance with
FCC RF exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile phone with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. The maximum SAR values for this model phone as reported to the FCC
are:
• Head: 1.31 W/kg.
• Body-worn: 0.558 W/kg.
Health and Safety Information
132
SAR information on this and other model phones can be viewed on-line at
http://www.fcc.gov/oet/ea. To find information that pertains to a particular model
phone, this site uses the phone FCC ID number which is usually printed somewhere
on the case of the phone.
Sometimes it may be necessary to remove the battery pack to find the number. Once
you have the FCC ID number for a particular phone, follow the instructions on the
website and it should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be obtained at
www.fcc.gov/cgb/sar.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its customers to recycle
Samsung mobile phones and genuine Samsung accessories.
Go to: http://www.samsung.com/us/consumer/type/
type.do?group=mobilephones&type=mobilephones for more information.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety requirements. Please
adhere to the following safety instructions per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW
THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN ATTACHMENT
PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET. THIS
POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a series of Questions
and Answers for consumers relating to radio frequency (RF) exposure from wireless
phones. The FDA publication includes the following information:
133
Consumer Information on Wireless Phones
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones with built-in
antennas, often called "cell," "mobile," or "PCS" phones. These types of wireless
phones can expose the user to measurable radio frequency energy (RF) because of
the short distance between the phone and the user's head. These RF exposures are
limited by Federal Communications Commission safety guidelines that were
developed with the advice of FDA and other federal health and safety agencies.
When the phone is located at greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure decreases rapidly with increasing
distance from the source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at far lower power
levels, and thus produce RF exposures well within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are
associated with using wireless phones. There is no proof, however, that wireless
phones are absolutely safe. Wireless phones emit low levels of radio frequency
energy (RF) in the microwave range while being used. They also emit very low levels
of RF when in the stand-by mode. Whereas high levels of RF can produce health
effects (by heating tissue), exposure to low level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies have suggested that
some biological effects may occur, but such findings have not been confirmed by
additional research. In some cases, other researchers have had difficulty in
reproducing those studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation-emitting consumer
products such as wireless phones before they can be sold, as it does with new drugs
or medical devices. However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level that is hazardous to
the user. In such a case, FDA could require the manufacturers of wireless phones to
notify users of the health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Health and Safety Information
134
Although the existing scientific data do not justify FDA regulatory actions, FDA has
urged the wireless phone industry to take a number of steps, including the following:
• Support needed research into possible biological effects of RF of the type emitted
by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to the user that is
not necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible information
on possible effects of wireless phone use on human health.
FDA belongs to an interagency working group of the federal agencies that have
responsibility for different aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group
activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal
Communications Commission (FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA
and other health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone networks rely upon.
While these base stations operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless phones. Base
stations are thus not the primary subject of the safety questions discussed in this
document.
135
Consumer Information on Wireless Phones
What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies have
suffered from flaws in their research methods. Animal experiments investigating the
effects of radio frequency energy (RF) exposures characteristic of wireless phones
have yielded conflicting results that often cannot be repeated in other laboratories. A
few animal studies, however, have suggested that low levels of RF could accelerate
the development of cancer in laboratory animals. However, many of the studies that
showed increased tumor development used animals that had been genetically
engineered or treated with cancer-causing chemicals so as to be pre-disposed to
develop cancer in absence of RF exposure. Other studies exposed the animals to RF
for up to 22 hours per day. These conditions are not similar to the conditions under
which people use wireless phones, so we don't know with certainty what the results
of such studies mean for human health.
Three large epidemiology studies have been published since December 2000.
Between them, the studies investigated any possible association between the use of
wireless phones and primary brain cancer, glioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful health effects from wireless
phones RF exposures. However, none of the studies can answer questions about
long-term exposures, since the average period of phone use in these studies was
around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of people actually
using wireless phones would provide some of the data that are needed. Lifetime
animal exposure studies could be completed in a few years. However, very large
numbers of animals would be needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide data that is directly
applicable to human populations, but ten or more years' follow-up may be needed to
provide answers about some health effects, such as cancer. This is because the
interval between the time of exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in measuring actual RF exposure
during day-to-day use of wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which model of phone is used.
Health and Safety Information
136
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of
investigators around the world to ensure that high priority animal studies are
conducted to address important questions about the effects of exposure to radio
frequency energy (RF).
FDA has been a leading participant in the World Health Organization international
Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result
of this work has been the development of a detailed agenda of research needs that
has driven the establishment of new research programs around the world. The
Project has also helped develop a series of public information documents on EMF
issues.
FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal
Cooperative Research and Development Agreement (CRADA) to do research on
wireless phone safety. FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations. CTIA-funded research
is conducted through contracts to independent investigators. The initial research will
include both laboratory studies and studies of wireless phone users. The CRADA will
also include a broad assessment of additional research needs in the context of the
latest research developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not know that there is
- it is probably very small. But if you are concerned about avoiding even potential
risks, you can take a few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone every day, you
could place more distance between your body and the source of the RF, since the
exposure level drops off dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or use a wireless
phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are harmful. But if
you are concerned about the RF exposure from these products, you can use
measures like those described above to reduce your RF exposure from wireless
phone use.
137
Consumer Information on Wireless Phones
What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones,
including children and teenagers. If you want to take steps to lower exposure to
radio frequency energy (RF), the measures described above would apply to children
and teenagers using wireless phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF source will reduce RF
exposure.
Some groups sponsored by other national governments have advised that children
be discouraged from using wireless phones at all. For example, the government in
the United Kingdom distributed leaflets containing such a recommendation in
December 2000. They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to limit wireless
phone use by children was strictly precautionary; it was not based on scientific
evidence that any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that hands-free kits reduce risks. Hands-free
kits can be used with wireless phones for convenience and comfort. These systems
reduce the absorption of RF energy in the head because the phone, which is the
source of the RF emissions, will not be placed against the head. On the other hand, if
the phone is mounted against the waist or other part of the body during use, then
that part of the body will absorb more RF energy. Wireless phones marketed in the
U.S. are required to meet safety requirements regardless of whether they are used
against the head or against the body. Either configuration should result in
compliance with the safety limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that accessories that claim to shield the head
from those emissions reduce risks. Some products that claim to shield the user from
RF absorption use special phone cases, while others involve nothing more than a
metallic accessory attached to the phone. Studies have shown that these products
generally do not work as advertised. Unlike "hand-free" kits, these so-called
"shields" may interfere with proper operation of the phone. The phone may be
forced to boost its power to compensate, leading to an increase in RF absorption.
Health and Safety Information
138
In February 2002, the Federal trade Commission (FTC) charged two companies that
sold devices that claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims. According to FTC, these defendants
lacked a reasonable basis to substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact with some electronic
devices. For this reason, FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This standard will allow
manufacturers to ensure that cardiac pacemakers and defibrillators are safe from
wireless phone EMI. FDA has tested wireless phones and helped develop a voluntary
standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This
standard specifies test methods and performance requirements for hearing aids and
wireless phones so that no interference occurs when a person uses a compatible
phone and a compatible hearing aid at the same time. This standard was approved
by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible interactions with
other medical devices. Should harmful interference be found to occur, FDA will
conduct testing to assess the interference and work to resolve the problem.
Additional information on the safety of RF exposures from various sources can be
obtained from the following organizations (Updated 12/1/2006):
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html
• National Institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/homepage.html
• World Health Organization (WHO):
http://www.who.int/peh-emf/
139
Road Safety
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.hpa.org.uk/radiation
• US Food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to communicate by voice, almost
anywhere, anytime. But an important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using your wireless
phone behind the wheel of a car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such as speed dial and
redial. If available, these features help you to place your call without taking
your attention off the road.
2. When available, use a hands-free device. If possible, add an additional
layer of convenience and safety to your wireless phone with one of the
many hands free accessories available today.
3. Position your wireless phone within easy reach. Be able to access your
wireless phone without removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions. Rain,
sleet, snow, ice and even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while driving. Jotting down a
"to do" list or swivelping through your address book takes attention away
from your primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls when you are
not moving or before pulling into traffic. Try to plan calls when your car will
be stationary. If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then continue.
Health and Safety Information
140
7. Do not engage in stressful or emotional conversations that may be
distracting. Make people you are talking with aware you are driving and
suspend conversations that have the potential to divert your attention from
the road.
8. Use your wireless phone to call for help. Dial 9-1-1 or other local
emergency number in the case of fire, traffic accident or medical
emergencies. Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in emergencies. If you see an auto
accident, crime in progress or other serious emergency where lives are in
danger, call 9-1-1 or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency wireless assistance
number when necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency number.
"The wireless industry reminds you to use your phone safely when driving."
For more information, please call 1-888-901-SAFE, or visit our web-site
www.wow-com.com.
Important!: If you are using a handset other than a standard numeric keypad, please call 1-888-901-7233.
Provided by the Cellular Telecommunications & Internet Association.
Responsible Listening
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud sounds over time. The
risk of hearing loss increases as sound is played louder and for longer durations.
Prolonged exposure to loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that using portable
audio devices, such as portable music players and cellular telephones, at high
volume settings for long durations may lead to permanent noise-induced hearing
loss. This includes the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound has also been
associated in some studies with tinnitus (a ringing in the ear), hypersensitivity to
sound and distorted hearing.
141
Responsible Listening
Individual susceptibility to noise-induced hearing loss and potential hearing problem
varies. Additionally, the amount of sound produced by a portable audio device varies
depending on the nature of the sound, the device settings, and the headphones that
are used. As a result, there is no single volume setting that is appropriate for
everyone or for every combination of sound, settings and equipment.
You should follow some commonsense recommendations when using any portable
audio device:
• Set the volume in a quiet environment and select the lowest volume at which you
can hear adequately.
• When using headphones, turn the volume down if you cannot hear the people
speaking near you or if the person sitting next to you can hear what you are
listening to.
• Do not turn the volume up to block out noisy surroundings. If you choose to listen
to your portable device in a noisy environment, you noise-cancelling headphones
to block out background environmental noise. By blocking background
environment noise, noise cancelling headphones should allow you to hear the
music at lower volumes than when using earbuds.
• Limit the amount of time you listen. As the volume increases, less time is required
before you hearing could be affected.
• Avoid using headphones after exposure to extremely loud noises, such as rock
concerts, that might cause temporary hearing loss. Temporary hearing loss might
cause unsafe volumes to sound normal.
• Do not listen at any volume that causes you discomfort. If you experience ringing in
your ears, hear muffled speech or experience any temporary hearing difficulty
after listening to your portable audio device, discontinue use and consult your
doctor.
You can obtain additional information on this subject from the following sources:
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: [email protected]
Internet: http://www.audiology.org
Health and Safety Information
142
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Voice: (301) 496-7243
Email: [email protected]
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
National Institute for Occupational Safety and Health
Hubert H. Humphrey Bldg.
200 Independence Ave., SW
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
Operating Environment
Remember to follow any special regulations in force in any area and always switch
your phone off whenever it is forbidden to use it, or when it may cause interference
or danger. When connecting the phone or any accessory to another device, read its
user's guide for detailed safety instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users are advised that for the
satisfactory operation of the equipment and for the safety of personnel, it is
recommended that the equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over your shoulder if you are
using an external antenna).
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF) signals.
However, certain electronic equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to discuss alternatives.
143
Using Your Phone Near Other Electronic Devices
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained between a handheld
wireless phone and an implantable medical device, such as a pacemaker or
implantable cardioverter defibrillator, to avoid potential interference with the device.
Persons who have such devices:
• Should ALWAYS keep the phone more than six (6) inches from their implantable
medical device when the phone is turned ON;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the implantable medical device to minimize the
potential for interference;
• Should turn the phone OFF immediately if there is any reason to suspect that
interference is taking place.
• Should read and follow the directions from the manufacturer of your implantable
medical device. if you have any questions about using your wireless phone with
such a device, consult your health care provider.
For more information see, http://www.fcc.gov/oet/rfsafety/rf-faqs.html
Hearing Aid Compatibility with Mobile Phones
Some digital wireless phones may interfere with some hearing aids. In the event of
such interference, you may wish to consult your hearing aid manufacturer to discuss
alternatives.
Other Medical Devices
If you use any other personal medical devices, consult the manufacturer of your
device to determine if it is adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this information. Switch your phone
off in health care facilities when any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles. Check with the manufacturer or its representative
regarding your vehicle. You should also consult the manufacturer of any equipment
that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require you to do so.
Health and Safety Information
144
Potentially Explosive Environments
Switch your phone off when in any area with a potentially explosive atmosphere and
obey all signs and instructions. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the phone off while at a refueling point (service station).
Users are reminded of the need to observe restrictions on the use of radio equipment
in fuel depots (fuel storage and distribution areas), chemical plants or where blasting
operations are in progress.
Areas with a potentially explosive atmosphere are often but not always clearly
marked. They include below deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as propane or butane), areas where the
air contains chemicals or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio signals, wireless and
landline networks as well as user-programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never rely solely on any wireless
phone for essential communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must be switched on and in a
service area with adequate signal strength. Emergency calls may not be possible on
all wireless phone networks or when certain network services and/or phone features
are in use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for example, 911
or other official emergency number). Emergency numbers vary by location.
sEND
3. Press the
key.
If certain features are in use (call barring, for example), you may first need to
deactivate those features before you can make an emergency call. Consult this
document and your local cellular service provider.
When making an emergency call, remember to give all the necessary information as
accurately as possible. Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off the call until given
permission to do so.
145
FCC Notice and Cautions
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play with it because they
could hurt themselves and others, damage the phone or make calls that increase
your phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in close proximity to receiving
equipment. The FCC can require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or butane) must comply
with the National Fire Protection Standard (NFPA-58). For a copy of this standard,
contact the National Fire Protection Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
Cautions
Any changes or modifications to your phone not expressly approved in this document
could void your warranty for this equipment, and void your authority to operate this
equipment. Only use approved batteries, antennas and chargers. The use of any
unauthorized accessories may be dangerous and void the phone warranty if said
accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of equipment and can be
broken. Avoid dropping, hitting, bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the phone in a vehicle.
Faulty installation or service may be dangerous and may invalidate any warranty
applicable to the device.
• Check regularly that all wireless phone equipment in your vehicle is mounted and
operating properly.
• Do not store or carry flammable liquids, gases or explosive materials in the same
compartment as the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember that an air bag inflates with great
force. Do not place objects, including both installed or portable wireless equipment
in the area over the air bag or in the air bag deployment area. If wireless
equipment is improperly installed and the air bag inflates, serious injury could
result.
Health and Safety Information
146
• Switch your phone off before boarding an aircraft. The use of wireless phone in
aircraft is illegal and may be dangerous to the aircraft's operation.
• Failure to observe these instructions may lead to the suspension or denial of
telephone services to the offender, or legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the signal strength in your
area. Your phone informs you of the current signal strength by displaying a number
of bars next to the signal strength icon. The more bars displayed, the stronger the
signal.
If you're inside a building, being near a window may give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after searching, a Power Save feature is
automatically activated. If your phone is active, it periodically rechecks service
availability or you can check it yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays on the screen.
When a signal is found, your phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's turned on, it
receives and transmits radio frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This power can range from 0.006
watts to 0.2 watts in digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should service your
phone and accessories. Faulty service may void the warranty.
There are several simple guidelines to operating your phone properly and
maintaining safe, satisfactory service.
• If your phone is equipped with an external antenna, hold the phone with the
antenna raised, fully-extended and over your shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing the internal
antenna could inhibit call performance.
• Speak directly into the phone's receiver.
147
Availability of Various Features/Ring Tones
• Avoid exposing your phone and accessories to rain or liquid spills. If your phone
does get wet, immediately turn the power off and remove the battery. If it is
inoperable, call Customer Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may require additional
subscription and/or usage charges. Not all features are available for purchase or use
in all areas. Downloadable Ring Tones may be available at an additional cost. Other
conditions and restrictions may apply. See your service provider for additional
information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage patterns and conditions.
Battery power consumption depends on factors such as network configuration,
signal strength, operating temperature, features selected, frequency of calls, and
voice, data, and other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard surface, can
potentially cause damage to the phone and battery. If you suspect damage to the
phone or battery, take it to a service center for inspection.
• Never use any charger or battery that is damaged in any way.
• Do not modify or remanufacture the battery as this could result in serious safety
hazards.
• If you use the phone near the network's base station, it uses less power; talk and
standby time are greatly affected by the signal strength on the cellular network
and the parameters set by the network operator.
• Follow battery usage, storage and charging guidelines found in the user’s guide.
• Battery charging time depends on the remaining battery charge and the type of
battery and charger used. The battery can be charged and discharged hundreds of
times, but it will gradually wear out. When the operation time (talk time and
standby time) is noticeably shorter than normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge itself over time.
• Use only Samsung-approved batteries and recharge your battery only with
Samsung-approved chargers. When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to a charger for more than a
week, since overcharging may shorten its life.
Health and Safety Information
148
• Do not use incompatible cell phone batteries and chargers. Some Web sites and
second-hand dealers, not associated with reputable manufacturers and carriers,
might be selling incompatible or even counterfeit batteries and chargers.
Consumers should purchase manufacturer or carrier recommended products and
accessories. If unsure about whether a replacement battery or charger is
compatible, contact the manufacturer of the battery or charger.
• Misuse or use of incompatible phones, batteries, and charging devices could result
in damage to the equipment and a possible risk of fire, explosion, leakage, or other
serious hazard.
• Extreme temperatures will affect the charging capacity of your battery: it may
require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in summer or winter
conditions, as you will reduce the capacity and lifetime of the battery. Always try to
keep the battery at room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as on or near a
cooking surface, cooking appliance, iron, or radiator.
• Do not get your phone or battery wet. Even though they will dry and appear to
operate normally, the circuitry could slowly corrode and pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object (coin, clip or pen) causes a direct connection between the + and -
terminals of the battery (metal strips on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting the terminals may damage the
battery or the object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with metal objects,
such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the battery as this can
cause an internal short-circuit, resulting in overheating.
• Dispose of used batteries in accordance with local regulations. In some areas, the
disposal of batteries in household or business trash may be prohibited. For safe
disposal options for Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a fire.
149
Care and Maintenance
Care and Maintenance
Your phone is a product of superior design and craftsmanship and should be treated
with care. The suggestions below will help you fulfill any warranty obligations and
allow you to enjoy this product for many years.
• Keep the phone and all its parts and accessories out of the reach of small children.
• Keep the phone dry. Precipitation, humidity and liquids contain minerals that will
corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an electric shock to
you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its moving parts may be
damaged.
• Do not store the phone in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms up to its normal
operating temperature, moisture can form inside the phone, which may damage
the phone's electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling can break internal circuit
boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to clean the
phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water
solution.
• Do not paint the phone. Paint can clog the device's moving parts and prevent
proper operation.
• Do not put the phone in or on heating devices, such as a microwave oven, a stove
or a radiator. The phone may explode when overheated.
• If your phone is equipped with an external antenna, use only the supplied or an
approved replacement antenna. Unauthorized antennas or modified accessories
may damage the phone and violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working properly, take it to
your nearest qualified service facility. The personnel there will assist you, and if
necessary, arrange for service.
Health and Safety Information
150
Section 13: Warranty Information
Topics Covered
•
Standard Limited Warranty
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants to the original
purchaser ("Purchaser") that SAMSUNG's Phones and accessories ("Products") are
free from defects in material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for the following
specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon proper use of
Product by Purchaser. This Limited Warranty does not cover: (a) defects or damage
resulting from accident, misuse, abuse, neglect, unusual physical, electrical or
electromechanical stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number removed or made
illegible; (c) any plastic surfaces or other externally exposed parts that are scratched
or damaged due to normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral equipment not
furnished or approved by SAMSUNG; (e) defects or damage from improper testing,
operation, maintenance, installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the United States or
Canada.
151
Standard Limited Warranty
This Limited Warranty covers batteries only if battery capacity falls below 80% of
rated capacity or the battery leaks, and this Limited Warranty does not cover any
battery if (i) the battery has been charged by a battery charger not specified or
approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery
are broken or show evidence of tampering, or (iii) the battery has been used in
equipment other than the SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty period,
SAMSUNG will repair or replace, at SAMSUNG's sole option, without charge to
Purchaser, any defective component part of Product. To obtain service under this
Limited Warranty, Purchaser must return Product to an authorized phone service
facility in an adequate container for shipping, accompanied by Purchaser's sales
receipt or comparable substitute proof of sale showing the date of purchase, the
serial number of Product and the sellers' name and address. To obtain assistance on
where to deliver the Product, call Samsung Customer Care at 1-888-987-4357.
Upon receipt, SAMSUNG will promptly repair or replace the defective Product.
SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts
or components when repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases, pouches and
holsters will be warranted for a period of ninety (90) days. All other repaired/replaced
Product will be warranted for a period equal to the remainder of the original Limited
Warranty on the original Product or for 90 days, whichever is longer. All replaced
parts, components, boards and equipment shall become the property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this Limited Warranty,
Purchaser must pay all parts, shipping, and labor charges for the repair or return of
such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY? EXCEPT AS SET
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO WARRANTY OR REPRESENTATION
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR
PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR
Warranty Information 152
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO
CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY
OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY
STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY
KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF
USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR
LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM
ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF
CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO
STATE/PROVINCE TO PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO
ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS
HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL
ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR
THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES
IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED
AS THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY
THIRDPARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE
OR EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR
153
Standard Limited Warranty
EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER
OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE
MAY BE.
This Limited Warranty allocates risk of Product failure between Purchaser and
SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make modifications to
this Limited Warranty, or make additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer advertising or presentation,
whether oral or written, do not constitute warranties by SAMSUNG and should not be
relied upon.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the standard methods,
the data only appears to be removed on a superficial level, and it may be possible for
someone to retrieve and reuse the data by means of special software.
To avoid unintended information leaks and other problems of this sort, it is
recommended that the device be returned to Samsung’s Customer Care Center for
an Extended File System (EFS) Clear which will eliminate all user memory and return
all settings to default settings. Please contact the Samsung Customer Care Center
for details.
Important!: Please provide warranty information (proof of purchase) to Samsung’s Customer Care Center
in order to provide this service at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein St.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Warranty Information 154
Samsung Telecommunications America, LLC
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad, dial the numbers listed
in brackets.
Phone: 1-888-987-HELP (4357)
©2007 Samsung Telecommunications America. All rights reserved.
No reproduction in whole or in part allowed without prior written approval.
Specifications and availability subject to change without notice.
155
definition 29
deleting entry 32
Index
icons 29
new contact 31
Numerics
updating existing contact 31
Call In-progress menu 28
Change lock code 97
Changing Message Settings 80
Clear key 13
Clock Format 91
Command Keys 13
Contact List
1-touch dialing 64
2-touch dialing 64
3-touch dialing 64
911, notes about 65
A
Adding a New Contact Entry 56
Alarm clock
icon 18
snooze 128
finding a contact entry 63
Contacts
turn off the alarm 127
Answer options 101
Auto answer icon 18
Auto retry 102
adding a new contact entry 56
deleting a contact entry 64
editing an existing contact
entry 63
speed dialing 64
wait pause & 2-second
pause 59
B
Backup to last menu 43
Battery 19
Contacts Icons 55
Creating and Sending Picture
Messages 73
Creating and Sending TXT
Messages 72
charging 22
indicator 25
installing 20
removing 21
strength icon 17
Bluetooth 83
about 83
D
Dial Fonts 91
Dialing
C
one-touch 64
three-touch 64
two-touch 64
Disable alarm 127
Display 88
Calendar
add a new event 124
Call Functions 26
answering a call 27
Recent Calls 29
roaming 32
backlight 90
banner 89
language 93
screen icons 16
Call history
calls using 30
156
Display Theme 91
I
Download music to your PC using
V CAST Music Manager 105
Draft messages 78
Icons
alarm on 18
alarm only 18
battery strength 17
display 16
signal strength 16
silent mode 18
TTY 17
Drafts folder 78
E
End key 13
Entering Text
changing text entry mode 50
entering numbers 53
entering symbols 52
using Word Mode 51
Inbox folder 75
Indicator
calendar appointment 18
missed calls 18
new message 18
no service 17
F
Finding a Contacts Entry 63
Folder
roaming 16
drafts 78
inbox 75
sent 76
signal strength 16
speakerphone 18
Installing battery 20
G
L
Get It Now 115
Getting Started 4
understanding this user
manual 4
Language setting 93
Left soft key 13
Lock code, changing 97
Lock Mode
placing an emergency call 99
Lock phone 94
Groups
creating 61
move entries from/to 60
send messages to 61
send picture messages to 62
viewing 60
M
Making a call 26
Menu Navigation 43
menu outline 44
Menu shortcuts 43
Menu, Call In-progress option 28
Messages, receive in call 71
Messaging 68
H
Health and Safety Information 131
types of messages 68
Mode
call answer 101
157
lock phone 94
voice privacy 103
Security settings 94
Send key 14
Sent, reviewing messages 76
Set an alarm 126
Settings 82
N
Navigation key 14
Navigation key shortcuts 44
Navigation wheel 14
New message icon 18
No service indicator 17
Non-Supported Battery 20
Notes and tips 4
backlight 90
banner 89
display settings 88
edit lock code 97
language 93
Notes, description 4
Notes, editing 130
P
Phone Info 104
Phone Settings 92
Shortcut Key 92
Standalone Mode 92
Picture messages
view later 71
lock phone 94
resetting your phone 98
security settings 94
Tools 82
Shortcut to menus 43
Signal strength icon 16
Silent mode icon 18
Snooze 128
Powering off 5
Powering on 5
Sounds 86
R
Alert Sounds 87
Receive messages in call 71
Receive text messages 68
Receiving a Message 69
Receiving Picture Messages 70
Removing battery 21
Return to last menu 43
Reviewing sent 76
Right soft key 13
Call Sounds 86
Keypad Volume 87
Power On/Off 88
Service Alerts 88
Speakerphone Key 15
Speed dial, assigning 65
Standard Limited
Warranty 151
Sync Music from your PC to your
device using V CAST Music
Manager 106
Roaming
definition 32
options 32
Roaming indicator 16
T
S
Text messages, receiving 68
Tip, description 4
Safe Use of your phone 133
Security
edit lock code 97
158
Tools 82
W
Alarm Clock 82, 126
Wallpaper 90
Warranty Information 151
Calculator 82, 122
Calendar 82, 124
converter 123
Notepad 82, 129
Stop Watch 128
Tip, calculator 123
view an event 125
Voice Commands 82, 122
World Clock 82, 129
Travel Charger 22
TTY Mode 33, 102
Turning Your Phone On and Off 5
Two-touch dialing 64
U
Understanding Your Contacts 54
Understanding Your Phone 7
features of your phone 7
main screen 16
V
Vibrate mode icon 18
View an event, calendar 125
Voice Call Icon 17
Voice privacy 103
Voicemail
listening to 6
setting up 5
voicemail icon 18
VoiceSignal
commands 38
description 38
name dial 39
name lookup 40
open menu 41
send text 39
159
|