Sony RMO S551 User Manual

SMO-F551 / RMO-S551  
Magneto-Optical  
Disk Drive  
Installation Guide  
1.3  
SMO-F551 / RMO-S551 Installation Guide  
Installation Procedure on DOS and Windows3.1  
Requirements:  
1. SCSI host adapter  
SCSI host adapter controls the command and data transfer between MO drive and host  
computer. (Ex. AHA-2940, AHA-3940 of Adaptec)  
2. Device driver  
Device driver controls MO drive. Device driver is almost supplied with SCSI host  
TM  
adapter. If you use RMO-S551, we recommend to use the “Formatter One Pro  
bundled with RMO-S551.  
3. SCSI cable  
SCSI cable is used for connecting host adapter and MO drive. Please select proper  
SCSI cable.  
4. Format utility software  
Format utility software is used to format the media and make partitions. Format utility  
software is often supplied with SCSI host adapter. (e.g. ASPI manager and ASPI driver  
for AHA-29xx are provided from Adaptec) But if you use RMO-S551, we recommend to  
use the “Formatter One Pro TM” bundled with RMO-S551.  
Installation:  
1) Connection  
- Set the SCSI host adapter into the host computer.  
- Attach the MO drive to the SCSI host adapter using proper SCSI cable.  
- Set proper SCSI ID and termination on the MO drive.  
2) Install the device driver  
- Turn on the MO drive and host computer.  
- Install the device driver on DOS level or on Windows3.1 and reboot host computer.  
3) Format the media and partition  
- Format and Label the media using a format utility tool, such as “Formatter One Pro TM”.  
3
SMO-F551 / RMO-S551 Installation Guide  
Note:  
- DOS and Window3.1 limit one partition size to 2.1GB. Please make a partition under  
2.1GB per partition.  
- “Formatter One Pro TM” supports all kind of MO media (4.1GB, 4.8GB, 5.2GB), but some  
device driver does not support 4.8GB or 5.2GB media. Please confirm the proper media  
before using the device driver. If you have any questions, please contact your dealer of  
the device driver.  
- DOS and Windows3.1 do not support WORM media.  
- Before rebooting a host PC, please don’t replace other media of a different sector size.  
4
SMO-F551 / RMO-S551 Installation Guide  
Installation Procedure on Windows95/98  
Requirement:  
1. SCSI host adapter  
SCSI host adapter controls the command and data transfer between MO drive and host  
computer. (Ex. AHA-2940, AHA-3940 of Adaptec) Most of SCSI host adapters are  
supported by Windows95/98.  
2. Device driver  
Device driver controls MO drive. Windows95/98 encloses the device driver on  
installation CD-ROM or floppy disk. If you use RMO-S551, we recommend to use the  
“Formatter One Pro TM” bundled with RMO-S551.  
3. SCSI cable  
SCSI cable is used for connecting host adapter and MO drive. Please select proper  
SCSI cable.  
4. Format utility software  
Format utility software is used to format the media and make partitions. Format utility  
software is often supplied with SCSI host adapter. If you use RMO-S551, we  
recommend to use the “Formatter One Pro TM” bundled with RMO-S551.  
Installation:  
1) Connection  
- Set the SCSI host adapter into the host computer.  
- Attach the MO drive using proper SCSI cable.  
- Set proper SCSI ID and termination on the MO drive.  
2) No device driver  
2)-1 Preparation  
- Turn on the drive and insert the media.  
- Turn on the power of the host system and boot Windows95/98.  
2)-2 To detect the connected hardware  
- Click the Start button, point to Setting, a system and boot Windows95/98.  
- Click Add New Hardware icon.  
- Follow the instructions on display  
2)-3 Format and Label the media  
- Double-click My Computer icon to view various drive icons.  
- Highlight the Removable drive icon  
- Point on File, and click Format option to initialize and label media.  
5
SMO-F551 / RMO-S551 Installation Guide  
3) Install the device driver  
3)-1 Preparation  
- Turn on the MO drive and host computer.  
- Install the device driver on Windows95/98 and reboot the host computer. (Please refer  
to the user’s guide of the Device Driver)  
3)-2 Format the media and partition  
- Format and Label the media using format utility software, such as “Formatter One Pro  
TM”.  
Note:  
- Windows95/98 limits one partition size to 2.1GB, please make a partition under 2.1GB  
per partition.  
- Don’t use floppy format for 4.8GB and 5.2GB Media, because the partition size is over  
2.1GB.  
- “Formatter One Pro TM” supports all kind of MO media (4.1GB, 4.8GB, 5.2GB), but some  
device driver or native Windows95/98 system do not support 4.8GB or 5.2GB media.  
Please confirm the proper media before using the device driver. If you have any  
question, please contact your dealer of the device driver.  
- Windows95/98 does not support WORM media.  
- Before rebooting a host PC, please don’t replace other media of a different sector size.  
6
SMO-F551 / RMO-S551 Installation Guide  
Installation Procedure on WindowsNT  
Requirement:  
1. SCSI host adapter  
SCSI host adapter controls the command and data transfer between MO drive and host  
computer. (Ex. AHA-2940, AHA-3940)  
2. Device driver  
Device driver controls MO drive. WindowsNT include the Device Driver. If you use  
RMO-S551, we recommend to use the “Formatter One Pro TM” is supplied with RMO-  
S551.  
3. SCSI cable  
SCSI cable is used for connecting host adapter and MO drive. Please select proper  
SCSI cable.  
4. Format Utility software  
Format utility software is used to format media and make partitions. Format utility is  
often supplied with SCSI host adapter. If you use RMO-S551, we recommend to use the  
“Formatter One Pro TM” bundled with RMO-S551.  
Installation:  
1) Connection  
- Set the SCSI host adapter into the host computer.  
- Attach the MO drive using proper SCSI cable.  
- Set proper SCSI ID and termination on the MO drive.  
2) No device driver  
2)-1 Preparation  
- Turn on the drive and insert the media.  
- Turn on the power of the host system and boot WindowsNT.  
- Let it Autoconfigure the hardware.  
2)-2 Format the media and partition  
a) Click the Start button and point to Program “Administrative Tools”.  
Click on Disk Administrator  
- Verify to write signature to the media.  
- Highlight the drive icon to be partitioned.  
- Click on File, then Create Partition  
- Choose partition parameters and click OK.  
- Close Disk Administrator....save changes when asked.  
7
SMO-F551 / RMO-S551 Installation Guide  
b) Click on Disk Administrator again  
- Highlight the partitioned drive icon.  
- Click on Tools, then Format.  
Choose format type (see Notes) and volume label name.  
- Format the media.  
- Close Disk Administrator.  
3) Install the device driver  
3)-1 Preparation  
- Login WindowsNT  
- Install the device driver on WindowsNT and reboot the host computer. (Please refer to  
the user’s guide of the Device Driver)  
3)-2 Format the media and partition  
- Format and Label the media using format utility software, such as “Formatter One Pro  
TM”.  
Note:  
- There are two format types that Disk Administrator supports.  
1) FAT: allows media to be removed easily.  
2) NTFS: ‘locks’ the media into the drive.  
- “Formatter One Pro TM” support only FAT16 file system. If you would like to use NTFS  
file system, please use disk administrator after logining as administrator.  
- “Formatter One Pro TM” supports all kind of MO media (4.1GB, 4.8GB, 5.2GB), but some  
device driver or native WindowsNT system do not support 4.8GB or 5.2GB media.  
Please confirm the proper media before using the device driver. If you have any  
question, please contact your dealer of the device driver.  
- When you format 4.8GB or 5.2GB media using disk administrator, please select NTFS  
file system.  
- WindowsNT does not support WORM media.  
- Before rebooting a host PC, please don’t replace other media of a different sector size.  
8
SMO-F551 / RMO-S551 Installation Guide  
Installation Procedure on SUN System  
Test equipment:  
The following procedure was confirmed with the following system and drive combination:  
Host:  
OS:  
Target:  
SUN Ultra Enterprise 450  
Solaris 2.3, Solaris 2.4, Solaris 2.5.1, Solaris 2.6  
RMO-S551  
- device type is set to 0  
- 512 byte/sector media is used.  
Since the SCSI driver “sd” which comes with the SUN’s UNIX system is for device type 0  
(hard disk drive, in general), the cases with device type 7 or 1024 bytes/sector media are  
not supported.  
Installation:  
1) Connection  
- Set the SCSI host adapter into the host computer using proper SCSI cable.  
- Set proper SCSI ID on the MO drive.  
- Set proper termination.  
- Set the Device Type 0.  
2) Login  
- Turn on the MO drive and the host computer.  
- Login as root or be a super user with “su” command.  
3) Format and partition  
To make a disk accessible, perform the following three command:  
- ‘format’: using to format media.  
- ‘newfs’: using to make file system.  
- ‘mount’: using to mount media.  
Create a ‘format.dat’ file prior to issuing the ‘format’ command  
4) Edit “format.dat” file  
- add following configuration to the “format.dat”.  
#
# This is a list of sample Sony 5.25 inch MO disk configurations.  
#
disk_type = "ISO 4X MO disk, 1150MB" ¥  
: ctlr = SCSI : fmt_time = 2 ¥  
: ncyl = 2261 : acyl = 2 : pcyl = 2263 : nhead = 32 : nsect = 31¥  
: rpm = 3600 : bpt = 15872  
disk_type = "ISO 8X MO disk, 2035MB" ¥  
9
SMO-F551 / RMO-S551 Installation Guide  
: ctlr = SCSI : fmt_time = 2 ¥  
: ncyl = 4003 : acyl = 2 : pcyl = 4005 : nhead = 32 : nsect = 31 ¥  
: rpm = 3300 : bpt = 15872  
#
# This is a list of sample partition tables for Sony 5.25 inch MO disk.  
#
partition = "ISO 4X MO disk, 1150MB" ¥  
: disk = "ISO 4X MO disk, 1150MB" : ctlr = SCSI ¥  
: 0 = 0 , 0 : 1 = 0, 0 : 2 = 0, 2242912 :  
partition = "ISO 8X MO disk, 2035MB" ¥  
: disk = "ISO 8X MO disk, 2035MB" : ctlr = SCSI ¥  
: 0 = 0 , 0 : 1 = 0, 0 : 2 = 0, 3970976 :  
Note:  
- SUN System supports only 512 byte/sector MO media, you can use 2.3GB and 4.1GB  
media. If you would like to use 1024 byte/sector or 2048 byte/sector media, please use  
a proper device driver software for SUN system.  
10  
SMO-F551 / RMO-S551 Installation Guide  
Installation Procedure on Silicon Graphics Systems  
Test equipment:  
The following procedure was confirmed with the following system and drive combination:  
Host:  
OS:  
SGI O2 R5000, R10000  
IRIX6.3  
Target:  
RMO-S551  
Installation:  
1) Connection  
- Attach the drive to the host using a proper SCSI cable.  
- Set proper SCSI ID on the MO drive. (In this case, SCSI ID = 4)  
- Set proper termination.  
Note: The SCSI ID number should be unique for each SCSI devices. The “hinv” command in the  
maintenance mode of the SGI workstation is useful to determine SCSI ID numbers.  
2) Login  
- Turn on the MO drive and host computer.  
- Log in as root.  
- Confirm the connection of MO drive and UNIX Workstation using following command.  
Port2# #hinv –c scsi  
Optical disk : unit 4 on SCSI controller 1  
3) Media Initialization  
- Launch the Unix Shell and insert a cartridge into the drive  
- Enter “fx-x” at the Unix Shell prompt  
Format the media using following commands.  
port0 3# fx -x [enter]  
fx version 6.3, July xx, 1998  
fx: “device name“ = (dksc) [enter]  
fx: ctlr# = (0) 1 [enter]  
fx: drive# = (1) 4 [enter]  
. . . opening dksc(1,4)  
. . . controller test. . . OK  
.
.
11  
SMO-F551 / RMO-S551 Installation Guide  
.
.
----- please choose one (? for help, .. to quit this menu)-----  
[exi]t  
[d]ebug/  
[l]abel/  
[a]uto  
[b]adblock/  
fx> f  
[exe]rcise/  
[r]epartition/  
[f]ormat  
fx/format: drive parameter to usr in formatting = (current) [enter]  
*********WARNING*********  
about to destroy data on disk dksc(1,4)! Ok? Yes [enter]  
.
.
4) Repartition the media  
Repartition the media from “root drive” to “option drive” using following commands.  
----- please choose one (? for help, .. to quit this menu)-----  
[exi]t  
[d]ebug/  
[l]abel/  
[a]uto  
[b]adblock/  
fx> r [enter]  
[exe]rcise/  
[r]epartition/  
[f]ormat  
----- partitions-----  
part type  
0: xfs  
cyls  
blocks  
3072 + 3708416  
3711488 + 262144  
0 + 3072  
Megabytes (base+size)  
1 + 1811  
1812 + 128  
0 + 1  
6 + 7243  
7249 + 512  
0 + 6  
1: raw  
8: volhdr  
10: volume  
0 + 7761  
0 + 3973632  
0 + 1940  
capacity is 3973952 blocks  
----- please choose one (? for help, .. to quit this menu)-----  
[ro]otdrive  
[u]srrootdrive  
[o]ptiondrive  
[re]size  
[e]xpert  
fx/repartition> o [enter]  
fx/repartition/optiondrive: type of data partition = (xfs) [enter]  
fx/repartition/optiondrive: create usr log partition? = (yes) [enter]  
Warning: You will need to re-install all software and restore user data from backups after  
changing the partition layout.  
Changing partitions will cause all data on the drive to be lost.  
Be sure you have the drive backed up if it contains any user data.  
Continue? Yes [enter]  
Can't get drive geometry, assuming 64 sectors/track  
Can't get drive geometry, assuming 8 heads  
Unable to get device geometry, assuming default  
12  
SMO-F551 / RMO-S551 Installation Guide  
----- partitions-----  
part type  
7: xfs  
cyls  
6 + 7738  
0 + 6  
blocks  
3072 + 3961856  
0 + 3072  
Megabytes (base+size)  
1 + 1934  
0 + 1  
8: volhd  
10: volume  
15:xfslog  
0 + 7761  
7744+17  
0 + 3973632  
3964928 + 8704  
0 + 1940  
1936 + 4  
capacity is 3973952 blocks  
----- please choose one (? for help, .. to quit this menu)-----  
[ro]otdrive  
[u]srrootdrive  
fx/repartition> ..  
[o]ptiondrive  
[re]size  
[e]xpert  
5) Confirm the partition  
Confirm the partition using following commands.  
----- please choose one (? for help, .. to quit this menu)-----  
[exi]t  
[d]ebug/  
[l]abel/  
[a]uto  
[b]adblock/  
fx> l [enter]  
[exe]rcise/  
[r]epartition/  
[f]ormat  
----- please choose one (? for help, .. to quit this menu)-----  
[sh]ow/ [sy]nc [se]t/ [c]reate/  
fx/label> sh [enter]  
----- please choose one (? for help, .. to quit this menu)-----  
[para]meters  
[g]eometry  
[part]itions  
[s]giinfo  
[b]ootinfo  
[d]irectory  
[a]ll  
fx/label/show> para [enter]  
----- please choose one (? for help, .. to quit this menu)-----  
[para]meters  
[g]eometry  
[part]itions  
[s]giinfo  
[b]ootinfo  
[d]irectory  
[a]ll  
fx/label/show> part [enter]  
----- partitions-----  
part type  
7: xfs  
cyls  
6 + 7738  
0 + 6  
blocks  
3072 + 3961856  
0 + 3072  
Megabytes (base+size)  
1 + 1934  
0 + 1  
8: volhd  
10: volume  
15:xfslog  
0 + 7761  
7744+17  
0 + 3973632  
3964928 + 8704  
0 + 1940  
1936 + 4  
13  
SMO-F551 / RMO-S551 Installation Guide  
---- please choose one (? for help, .. to quit this menu)-----  
[para]meters  
[g]eometry  
[part]itions  
[s]giinfo  
[b]ootinfo  
[d]irectory  
[a]ll  
fx/label/show> .. [enter]  
----- please choose one (? for help, .. to quit this menu)-----  
[sh]ow/  
[sy]nc  
[se]t/  
[c]reate/  
fx/label> .. [enter]  
----- please choose one (? for help, .. to quit this menu)-----  
[exi]t  
[d]ebug/  
[l]abel/  
[a]uto  
[b]adblock/  
fx> exit [enter]  
[exe]rcise/  
[r]epartition/  
[f]ormat  
6) Make a file system  
Make a file system using following command.  
port0 7# mkfs /dev/rdsk/dks1d4s7 [enter]  
meta-data=/dev/rdsk/dks1d4s7  
isize=256  
agcount=8, agsize=61904 blks  
blocks=495232, imaxpct=25  
blocks=1000  
data  
log  
=
bsize=4096  
bsize=4096  
extsz=65536  
=internal log  
realtime =none  
blocks=0, rtextents=0  
7) Mount the media  
Mount the media and confirm the result.  
( # mkdir /mo [enter] ! creat mount point)  
port0 8# mount /dev/dsk/dks1d4s7 /mo [enter]  
port0 9# df /mo [enter]  
File system  
/dev/dsk/dks1d4s0  
Type  
xfs  
blocks  
use avail  
%use  
1
Mounted on  
/mo  
3700416 288 3700128  
Note:  
As O2 supports only 512 Byte/sector MO media, you can use 2.3GB and 4.1GB MO  
media.  
14  
SMO-F551 / RMO-S551 Installation Guide  
Installation Procedure on HP Systems  
Test equipment:  
The following procedure was confirmed with the following system and drive combination:  
UNIX Workstation:  
OS:  
Target:  
HP9000/712  
HP-UX A.09.07  
RMO-S551  
Installation:  
1) Connection  
- Connect MO drive and UNIX Workstation using proper SCSI cable.  
- Set proper SCSI ID on the MO drive. (In this case, SCSI ID = 4)  
- Set proper termination.  
Note: The ‘ioscan’ command is useful to scan SCSI bus.  
# ioscan -fc disk [enter]  
2) Login  
- Turn on the MO drive and the host computer, and insert a cartridge into the drive.  
- Login as root.  
- Confirm the connection of MO drive and UNIX Workstation using following command.  
# diskinfo –v /dev /rdisk/c201d4s0 [Enter]  
SCSI describe of /dev/rdsk/c201d4s0 *[4.1GB(4.8GB, 5.2GB)]  
Vendor  
product id  
type  
: SONY  
: SMO-F551  
: optical memory  
size  
: 1986976 Kbytes (2319786, 2526944)  
bytes per sector : 512(1024, 2048)  
rev level : 1.08  
blocks per disk : 3973952 (2319786, 1263472)  
ISO version  
ECMA version  
ANSI version  
: 0  
: 0  
: 2  
removable media : yes  
response format : 2  
If the workstation return an error “diskinfo : can’t open /dev/rdsk/c201d1s0”, MO  
drive is not connected with UNIX workstation correctly. You should shut down the  
system and check the SCSI cable and SCSI terminator.  
15  
SMO-F551 / RMO-S551 Installation Guide  
3) Edit “disktab” file  
- Edit or add /etc/disktab file as following.  
###############################################  
# Sony Magneto-Optical Media  
###############################################  
SONY_MO_8X_2048:¥  
:No swap or boot:ns#39:nt#16:nc#3997:¥  
:s0#2494170:b0#8192:f0#2048:¥  
:se#2048:rm#3300:  
SONY_MO_8X_1024:¥  
:No swap or boot:ns#39:nt#16:nc#3671:¥  
:s0#2290750:b0#8192:f0#1024:¥  
:se#1024:rm#3300:  
SONY_MO_8X_512:¥  
:No swap or boot:ns#39:nt#16:nc#3131:¥  
:s0#1954200:b0#8192:f0#1024:¥  
:se#512:rm#3300:  
4) Format Media  
- Format the media using following command. You must execute this command only  
one time when you use the media first time.  
# mediainit –v /dev/rdsk/c201d0s0 [Enter]  
It takes about 45 minutes.  
5) Create a file system  
- Create a file system using following command.  
# newfs /dev/rdsk/c201d1s0  
[Enter]  
Media_type  
Media type : Please input proper sentence (refer disktab, ex SONY_MO_8X_512)  
6) Mount the media  
- Mount the media using following commands.  
# mkdir /mo [Enter]  
# mount /dev/dsk/c201d1s0 /mo [Enter]  
16  
SMO-F551 / RMO-S551 Installation Guide  
7) Confirm the result of mount command  
- Confirm the result of mount command using following command.  
# bdf /mo [Enter]  
(ex.4.1GB)  
Filesystem  
/dev/dsk/c201d4s0  
kbytes  
1900868  
used  
9
avail  
1710772  
capacity  
0%  
Mounted on  
/mo  
(ex.4.8GB)  
Filesystem  
/dev/dsk/c201d4s0  
kbytes  
2228170  
used  
9
avail  
2005344  
capacity  
0%  
Mounted on  
/mo  
(ex.5.2GB)  
Filesystem  
/dev/dsk/c201d4s0  
kbytes  
2426150  
used  
10  
avail  
2183524  
capacity  
0%  
Mounted on  
/mo  
Note:  
- You can not use GUI tool to format and mount the media. Please use shell commands.  
Appendix: Edit or add /etc/disktab file for 4XMO disk  
###############################################  
# Sony Magneto-Optical Media  
###############################################  
SONY_MO_4X_1024:¥  
:No swap or boot:ns#39:nt#16:nc#1988:¥  
:s0#1240240:b0#8192:f0#1024:¥  
:se#1024:rm#3600:  
SONY_MO_4X_512:¥  
:No swap or boot:ns#39:nt#16:nc#1773:¥  
:s0#1106088:b0#8192:f0#1024:¥  
:se#512:rm#3600:  
17  
SMO-F551 / RMO-S551 Installation Guide  
Installation Procedure on SantaCruzOperation Systems  
Test equipment:  
The following procedure was confirmed with the following system and drive combination:  
Host:  
OS:  
Target:  
PC-UNIX_SCO  
UnixWare 2.1, UnixWare 7  
RMO-S551  
Installation:  
1) Hardware Installation  
- Attach the drive to the system using a SCSI cable.  
- Set proper SCSI ID and termination.  
- Set proper Functional Switch.  
Note: Device type; Direct Memory Access Device Placing a jumper socket over  
the desired pair of pins A10/B10 turn "Direct Memory Access Device" function ON.  
(Please refer to Page 17-20 of Technical Guide for SMO-F551.)  
- Turn on the drive and insert the media.  
2) Turn on the power of the host system  
3) To use "diskadd" command to mount the disk on the system  
Note: The "diskadd" command is the type of conversation command. So it  
asks you some questions of to need the information under operation. Please  
refer to the online manual of UNIX_SCO on detail.  
4) To unmount disk on the system  
Note: It needs to operate the "unmount " before the eject of MO media.  
18  
SMO-F551 / RMO-S551 Installation Guide  
Appendix  
OS  
DOS  
O
O*1  
O*1  
Window3.1  
Windows95/98  
WindowsNT  
4.1GB media  
4.8GB media  
5.2GB media  
O
O*1  
O*1  
O
O*1  
O*1  
O
O*1  
O*1  
Table 1. Media support table-1  
*1: with using Formatter One Pro  
OS  
SUN Systems  
SGI Systems  
HP Systems  
SCO Systems  
4.1GB media  
4.8GB media  
5.2GB media  
O
X
X
O
X
X
O
O
O
O
X
X
Table 2. Media support table-2  
Capacity  
4.1GB  
4.8GB  
5.2GB  
Name  
Sector Size  
EDM-4100  
EDM-4800  
EDM-5200  
512 Byte/sector  
1024 Byte/sector  
2048 Byte/sector  
Table 3. Media information table  
19  

Transcend Information StoreJet TS250GSJ25M R User Manual
Sony MG310 User Manual
Sony Ericsson W200 User Manual
Seagate Barracuda ST31000640FC User Manual
Samsung GALAXY3 GT I5800 User Manual
Samsung Computer Drive HX M500UAE User Manual
Samsung Cell Phone s 4 mini sprint User Manual
Rosewill 5600 User Manual
Philips AJ3916CD User Manual
Nokia CLASSIC 6220 User Manual