2
DBB
ON
OFF
@
!
$
6 x R14• UM-2• C-CELLS
MW FM
OFF
CD
-
LINE IN
9
#
7
3
8
4
5
PROG
6
X
ALL
English
Controls
Congratula tions on your purchase and
welcome to Philips!
CAUTION
- Visible and invisible laser radiation.
If the cover is open, do not look at
the beam.
To fully benefit from the support that
Philips offers, register your product at
- High voltage! Do not open.You run
the risk of getting an electric shock.
The machine does not contain any
user-serviceable parts.
Supplied Accessories
– AC power cord
- Modification of the product could
result in hazardous radiation of
EMC or other unsafe operation.
- Use of controls or adjustments or
performance of precedures other
than herein may result in unsafe
operation.
Top/front panels (See 1)
1
2
3
VOLUME
–
adjusts volume level.
43 – For MP3-CD only: select albums.
MODE
–
selects different play modes:
e.g. REPEAT or SHUFFLE (random
order).
This set complies with the radio
interference requirements of the
European Union.
4
2 ;
§ ∞
–
starts or pause CD playback
selects the next/previous track
–
– searches forwards/backwards (press and
hold the button) within the current track
9
–
–
stops CD playback;
erases a CD program
5 PROG – programs tracks and reviews the
program
6 LIFT TO OPEN – opens/closes the CD
door.
7 TUNING – tunes to radio stations
8
9
Display
–
shows the CD functions
Back panel (See 1and 2)
Source selector: CD, FM, MW, OFF
–
–
selects CD or radio source of sound
power off switch
0 Telescopic antenna - improves FM
reception.
AC MAINS~ - inlet for power cord.
!
@
#
DBB
–
turns the bass enhancement on/off.
LINE-IN – inlet for external audio source.
Bottom panel
Battery door – Press on the arrow and
push to insert 6 x 1.5V R-14/ UM-2/
C-cells.
$
Power Supply
General Operation
•
Disconnect the power cord from the wall
socket to protect your set during heavy
thunderstorms. Children could seriously
injure themselves as the free end of the
cable may still be live if only the connector
is removed from the MAINS socket at the
back of the unit.
Power Supply
Whenever convenient, use the power supply
cord if you want to conserve battery life.
Make sure you remove the plug from the
set and wall outlet before inserting batteries.
Batteries (not included)
1
2
Open the battery door and insert 6 batteries,
type R-14, UM-2 or C-cells, (preferably
alkaline) with the correct polarity as indicated
by the "+" and "–" symbols inside the
compartment.
The type plate is located on the bottom
of the set.
Helpful hints:
–
To avoid unnecessary energy consumption,
always adjust the Source selector to OFF
after using the set.
Replace the battery door, making sure the
batteries are firmly and correctly in place. The
set is now ready to operate.
Batteries contain chemical substances, so
they should be disposed of properly.
General operation
Switching on and off and selecting the
function
To select your sound source, adjust the
Source selector to: CD, FM or MW.
•
•
Incorrect use of batteries can cause electrolyte
leakage and will corrode the compartment or
cause the batteries to burst:
Do not mix battery types: e.g. alkaline with
carbon zinc. Only use batteries of the same type
for the set.
1
2
To switch off the set, adjust the Source
selector to OFF position.
•
•
When inserting new batteries, do not try to mix
old batteries with the new ones.
Remove the batteries if the set is not to be used
for a long time.Using AC power
WARNING: Always check you have
completely switched off the set, before
you change or disconnect power supply.
3
To switch to LINE IN mode, connect
an external audio source to the LINE-
IN inlet.
Helpful hints:
•
The set switches to LINE IN mode
1
2
Check if the power voltage, as shown on
the type plate located on the bottom
of the set, corresponds to your local
power supply. If it does not, consult your
dealer or service center.
automatically when an external audio source
is connected, no matter the set is in CD,
FM or MW mode.
•
The LINE-IN inlet is not for earphones.
Adjusting volume and sound
Connect the power cord to the AC
MAINS~ inlet and the wall socket. The set
is now connected and ready for use.
Adjust the sound with the VOLUME and
DBB controls.
3
4
To switch the set off completely, withdraw
the power cord from the wall socket.
Install the unit near the AC outlet and
where the AC power plug can be easily
reached.
Tuner
MP3-CD/CD Player
Playing a disc
Radio reception
•
•
This CD player plays Audio Discs including
CD-Recordables (CD-R), CD-Rewritables
(CD-RW) and MP3 CD.
1
2
Adjust the Source selector to FM or
MW.
Turn TUNING to tune to a station.
CD-ROM, CD-I, CDV, VCD, DVD or
computer CDs are not possible for playback.
Helpful hints:
To improve radio reception
IMPORTANT!
CDs encoded with copyright protection
technologies by some record companies
may be unplayable by this product.
•
For FM, extend, incline and turn the
telescopic antenna for best reception.
Reduce its length if the signal is too strong.
1
2
Adjust the Source selector to CD.
•
For MW, the set uses a built-in antenna.
Direct this antenna for best reception by
turning the whole set.
Open the CD door, and insert a CD with
the printed side facing up, then press the
CD door gently to close.
➜ Display shows ---, and later the total number
of tracks. (See
)
3
About MP3
3
4
Press 2; to start playback.
The music compression technology MP3
(MPEG1 Audio Layer 3) significantly reduce
the digital data of an audio CD while
maintaining CD quality sound.
To pause playback, press 2;.
2
➜
Display: flashes. (See
)
4
5
6
To resume, press 2; again.
•
•
Getting MP3 files: you can either
download legal music files from the internet
to your computer hard disc, or create such
files by converting audio CD files in your
computer through appropriate encoder
software. (128kbps bit rate or higher is
recommended for MP3 files.)
To stop CD playback, press
9.
Helpful hints:
CD play will also stop when:
–
–
–
you open the CD door;
you select FM MW or OFF sound source;
the CD has reached the end.
,
Creating a MP3 CD: burn the music files
from your computer hard disc on a CDR or
CDRW using your CD burner.
Helpful hints:
–
Make sure that the file names of the MP3 files
end with .mp3 .
–
Total number of music files and albums: around
400 (with a typical file name length of 20
characters)
–
The length of file names affects the number
of tracks for playback.With shorter file names,
more files can be burned on a disc.
MP3-CD/CD Player
Helpful hints :
Selecting a different track
∞
§
•
Press
/
once or repeatedly until the
–
When playback of your program comes
to the stop position, your set will
return to normal playback. To re-enter
program mode, press PROG in the stop
position.
desired track number appears in the display.
For MP3-CD: First press 34 once or more
to find your album.
In the pause/stop position, press 2; to start
playback.
•
Reviewing the program
In the stop position, press PROG
repeatedly to see your stored tracks.
Finding a passage within a
track
1
2
During playback, press and hold ∞ or § .
➜ The CD is played at high speed and with
reduced volume.
Erasing a program
You can erase the contents of the memory by:
– in the stop position, press PROG to
enter program mode, and then press 9.
When you recognize the passage you want,
release ∞ or § to resume normal playback.
– selecting FM
,
MW or OFF;
Helpful hints:
– opening the CD door;
–
When your searching reaches the end of the
last track, the CD goes to stop mode.
Different play modes:
REPEAT. and SHUFFLE
(See 6, 7)
Programming track
numbers
You can play the current track or the whole
disc repeatedly, and combine REPEAT
modes with PROG (PROGRAM).
You may store up to 20 tracks in the
desired sequence. If you like, store any track
more than once.
– plays the current track continuously.
1
In the stop position, press PROG to
activate programming.
– repeats the entire CD/program.
➜ Display: PROG and 00 flash. (See
5
)
For MP3:
2
3
Press
∞
or
§
to select your desired track
ALB –plays all tracks of current album
number.
repeatedly.
Press PROG to store the desired track
number.
– plays all tracks in random order.
➜ Display: PROG and 00flash for you to
1
To select play mode, press MODE once or
more.
program the next track.
➜ The display shows the related icon.
4
5
Repeat steps 2 to 3 to select and store all
desired tracks in this way.
➜ If you attempt to store more than 20 tracks,
no track can be selected and the display
shows ---.
2
3
Press 2; to start playback if in the stop/
pause position.
To return to normal playback, press MODE
repeatedly until the modes are no longer
displayed.
To play your program, press
2/;.
– You can also press 9 to cancel your play mode.
)
8
Maintenance & Safety (See
CD player and CD handling
Safety information
•
If the CD player cannot read CDs correctly,
use a cleaning CD to clean the lens before
taking the set to repair.
•
Place the set on a flat, hard and stable surface
so that the system does not tilt.
•
Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
•
•
The lens of the CD player should never be
touched!
Sudden changes in the surrounding
temperature can cause condensation on the
lens of your CD player. Playing a CD is then
not possible. Do not attempt to clean the lens
but leave the set in a warm environment until
the moisture evaporates.
•
Do not expose the set, batteries, CDs to
humidity, rain, sand or excessive heat caused
by heating equipment or direct sunlight.
•
•
The apparatus shall not be exposed to
dripping or splashing.
•
•
Always close the CD door to avoid dust on
the lens.
Adequate ventilation with a minimum gap
of 15cm (6 inches) between the ventilation
holes and surrounding surfaces is necessary to
prevent heat build-up.
To clean the CD, wipe in a straight line from
the center towards the edge using a soft, lint-
free cloth. Do not use cleaning agents as they
may damage the disc.
•
Do not cover the ventilation openings with
items such as newspapers, table-cloths,
curtains, etc.
•
Never write on a CD or attach any stickers
to it.
•
•
•
No objects filled with liquids, such as vases,
shall be placed on the apparatus.
No naked flame sources, such as lighted
candles, should be placed on the apparatus.
The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
•
To clean the set, use a dry cloth. Do not
use any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may
harm the housing.
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service
centre.
WARNING:
Do not open the set as there is a risk of electric shock. Under no
circumstances should you try to repair the set yourself, as this will
invalidate the guarantee.
Note:
Problem
Make sure the CD is not encoded with
copyright protection technologies, as some
do not conform to the Compact Disc
standard.
– Possible cause
• Remedy
No sound /power
– Volume not adjusted
The CD skips tracks
• Adjust theVOLUME
– CD damaged or dirty
– Power cord not securely connected
• Connect the AC power cord properly
– Batteries dead/ incorrectly inserted
• Insert (fresh) batteries correctly
– CD contains non-audio files
• Replace or clean CD
– Program/shuffle is active
• Quit program/shuffle mode
Note: A CD badly scratch or dirty may result in
improper operation.
∞
§
• Press
,
once or more to skip to a CD audio
track, instead of the data file.
Display does not function properly / No
reaction to operation of any of the
controls
Sound skips during MP3 playback
– MP3 file made at compression level exceeding
320kbps
• Use a lower compression level to record CD
tracks into MP3 format
– Disc damaged or dirty
– Electrostatic discharge
• Switch off and unplug the set. Reconnect after a
few seconds
• Replace or clean disc
--, Er or 01 indication
– No CD inserted
• Insert a CD
– CD badly scratched or dirty
• Replace/ clean CD, see Maintenance
– Laser lens steamed up
• Wait until lens has cleared
– CD-R/CD-RW is blank or not finalized
• Use a finalized CD-R/CD-RW or suitable CD
Audio disc only
Environmental information
All unnecessary packaging material has been omitted. The packaging can be easily
separated into three materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging, dead batteries and old equipment.
|