Samsung GH68 11214A User Manual

* Depending on the software installed or your service provider or country,

some of the descriptions in this guide may not match your phone exactly.

* Depending on your country, your phone and accessories may appear

different from the illustrations in this guide.

Printed in Korea

World Wide Web

Code No.:GH68-11214A

http://www.samsungmobile.com

English (SEA). 06/2006. Rev. 1.0

Drive safely at all times

Do not use a hand-held phone while driving.

Park the vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point

(service station) or near fuels or chemicals.

Important

safety

Switch off in an aircraft

Wireless phones can cause interference. Using

them in an aircraft is both illegal and

dangerous.

precautions

Switch off the phone near all medical

equipment

Failure to comply with the following

precautions may be dangerous or

illegal.

Hospitals or health care facilities may be using

equipment that could be sensitive to external

radio frequency energy. Follow any regulations

or rules in force.

Interference

All wireless phones may be subject to

interference, which could affect their

performance.

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any

area and always switch off your phone

whenever it is forbidden to use it, or when it

may cause interference or danger.

Use only Samsung-approved accessories

and batteries. Use of any unauthorised

accessories could damage you and your

phone and may be dangerous.

• The phone could explode if the battery is

replaced with an incorrect type.

• Dispose of used batteries according to the

manufacturer’s instructions.

Water resistance

Your phone is not water-resistant. Keep it

dry.

Sensible use

At very high volumes, prolonged

listening to a headset can damage

your hearing.

Use only in the normal position (held to the

ear). Avoid unnecessary contact with the

antenna when the phone is switched on.

Qualified service

Emergency calls

Only qualified service personnel may repair

your phone.

Key in the emergency number for your

present location, then press

For more detailed safety information, see

"Health and safety information" on page 99.

Keep your phone away from small

children

Keep the phone and all its parts, including

accessories, out of the reach of small

children.

•

Camera and camcorder

Use the camera module

on your phone to take a

photo or record a video.

About this Guide

This User’s Guide provides you with

condensed information about how to use

your phone. To quickly learn the basics for

your phone, please refer to “Get started”

and “Step outside the phone.”

In this guide, the following instruction icons

appear:

Special

features of your phone

Indicates that you need to pay

careful attention to the subsequent

information regarding safety or

phone features.

•

Image editor

Crop, resize, rotate, and

decorate your photos.

Indicates that you can get more

information on the referenced page.

ꢀ

•

Music player

Play music files using your

phone as a music player.

Indicates that you need to press the

Navigation keys to scroll to the

specified option and then select it.

→

Indicates a key on the phone. For

[

]

example,

[

]

Photo printing

Print your photos to

preserve your best

moments forever.

Indicates a soft key, whose function

is displayed on the phone screen. For

< >

example, <Menu

•

Phone to TV

•

Offline mode

Switch your phone to offline to use its

non-wireless functions in an airplane.

View photos and video

clips captured with the

phone on your TV screen.

E-mail

Send and receive e-mails with image,

video, and audio attachments.

File viewer

Open documents in

various formats on the

phone without corruption.

Multimedia Message Service (MMS)

Send and receive MMS messages with

a combination of text, image, video,

and audio.

Bluetooth

Transfer media files and

personal data and connect

to other devices using

free, wireless Bluetooth

technology.

•

Java

Enjoy Java™-based

embedded games and

download new games.

•

Web browser

Access the wireless web

to get up-to-the-minute

information and a wide

variety of media content.

•

Voice recorder

Record memos or sounds.

Send messages....................................... 20

View messages ....................................... 22

Use Bluetooth......................................... 23

Use a memory card ................................. 24

Watch the phone display on a TV............... 26

Contents

Unpack

Make sure you have each item

Enter text

Your phone

AB, T9, Number, and Symbol modes

Keys, features, and locations

Call functions

Get started

Advanced calling features

First steps to operating your phone

Menu functions

Install and charge the phone...................... 7

Power on or off......................................... 8

Keys and display ...................................... 9

Access menu functions ............................ 12

Customise your phone............................. 13

Make/Answer calls .................................. 16

All menu options listed

Solve problems

Help and personal needs

Health and safety information

Index

Step outside the phone

Begin with your camera, the music player, the

web, and other special features

106

Use the camera ...................................... 16

Play music ............................................. 17

Browse the web...................................... 18

Use Phonebook....................................... 19

Overview of menu functions

To access Menu mode, press <Menu> in Idle mode.

1 Call log

ꢀp. 33

3 Applications (continued)

6 My files (continued)

1 Recent contacts

2 Missed calls

3 Dialled calls

4 Received calls

5 Delete all

ꢀ

p. 33

p. 34

p. 35

10 Stopwatch

11 Key management

12 Memo

ꢀ

p. 48

p. 49

5 Other files

ꢀ

p. 72

p. 74

6 Memory card^***

7 Memory status

13 SIM AT^*

7 Calendar

8 Camera

9 Settings

ꢀ

p. 74

p. 77

p. 83

4 Browser

ꢀp. 49

6 Call time

7 Call costs^*

1 Home

2 Enter URL

ꢀp. 49

ꢀp. 51

ꢀp. 52

2 Phonebook

ꢀp. 35

3 Bookmarks

4 Saved pages

5 History

6 Clear cache

7 Browser settings

8 Streaming settings^**

1 Contact list

2 Create contact

3 Group

ꢀp. 35

ꢀp. 36

ꢀp. 37

ꢀp. 38

ꢀp. 39

1 Time and date

2 Phone settings

3 Display settings

4 Sound settings

5 Light settings

6 Network services

7 Bluetooth

8 Security

9 Connection settings

10 Reset settings

ꢀ

p. 83

p. 85

p. 86

p. 87

p. 88

p. 90

p. 93

p. 94

p. 96

4 Speed dial

5 My namecard

6 Own number

7 Management

8 Service number^*

5 Messages

ꢀp. 52

1 Create message

2 My messages

3 Templates

4 Delete all

5 Settings

6 SOS messages

7 Memory status

ꢀp. 52

ꢀp. 56

ꢀp. 61

ꢀp. 62

ꢀp. 68

3 Applications

ꢀp. 39

1 Music player

2 Voice recorder

3 Image editor

4 Java world

5 World clock

6 Alarm

7 Calculator

8 Convertor

9 Timer

ꢀp. 39

ꢀp. 42

ꢀp. 43

ꢀp. 45

ꢀp. 46

ꢀp. 47

ꢀp. 48

* Shows only if supported by your

SIM card.

** Shows only if supported by your

service provider.

*** Shows only if a memory card is

inserted.

6 My files

ꢀp. 68

1 Images

2 Videos

3 Music

ꢀp. 69

ꢀp. 70

ꢀp. 71

4 Sounds

Unpack

Your phone

Make sure you have each item

Keys, features, and locations

Camera flash

Camera lens

Earpiece

Display

Phone

Travel Adapter

Web access/

Confirm key

(Centre)

Play/Pause/

Stop key

Power on/

off key

Camera

key

Right soft key

Forward key

Left soft key

Volume keys

Battery

User’s Guide

Delete/Menu

exit key

Backward

key

Music

player key

You can obtain various

accessories from your local

Samsung dealer.

Navigation

keys (Up/

Down/

Dial key

Alphanumeric

keys

Headset/

Adapter jack

Left/Right)

Special

function keys

The items supplied with

your phone and the

accessories available at

your Samsung dealer may

vary, depending on your

country or service

Microphone

Speaker

Memory

card slot

provider.

Get started

First steps to operating your phone

Install the battery.

Reattach the

battery cover.

SIM card information

When you subscribe to a cellular network,

you receive a plug-in SIM (Subscriber

Identity Module) card loaded with your

subscription details, such as your PIN, and

available optional services.

Plug the travel adapter into the phone.

Install and charge the phone

Remove the

battery cover.

Insert the SIM

card.

Plug the adapter into a standard AC wall

outlet.

If the phone is

already on, first

turn it off by

pressing and

holding [ ].

Make sure that the

gold-coloured

contacts on the

card are face

down.

Get started

Power on or off

When the phone is completely charged

(the battery icon becomes still), unplug

the adapter from the power outlet.

Switch on

1. Open the phone.

Remove the adapter from the phone.

2. Press and hold [ ] on

the right of the phone.

Do not turn

on the phone

when mobile

phone use is

prohibited.

3. If necessary, enter the

PIN and press <OK>.

Low battery indicator

Switch off

1. Open the phone.

When the battery is low:

•

a warning tone sounds,

2. Press and hold [ ].

the low battery message displays, and

the empty battery icon

blinks.

If the battery level becomes too low, the

phone automatically turns off. Recharge

your battery.

Key Lock mode

Keys and display

When you close the phone, the keypad lock

feature locks the exposed keys so that

nothing will happen if the keys are

accidentally pressed.

Keys

Press and hold to switch the

phone on or off.

To unlock the keypad, press [ ].

In Idle mode, press and hold

[

MP3] to launch or close the

Offline mode

music player.

You can switch the phone to Offline mode, in

which the phone functions requiring network

connection are deactivated. This mode is

helpful when you want to use your phone in

a place where you are not allowed to use

mobile devices, such as in an airplane and at

a hospital.

In Idle mode, press and hold

[

] to turn on the camera. In

Camera mode, take a photo or

record a video.

Perform the function indicated

on the bottom line of the

display.

To switch to Offline mode, press <Menu

and select Settings Phone settings

Offline mode On

→

In Idle mode, access your

favourite menus directly.

→

In Offline mode, you can use non-wireless

functions, such as games, calendar, camera,

and music player.

ꢀ

p. 84

In Menu mode, scroll through

menu options.

Get started

In Idle mode, launch the web

browser.

End a call.

Delete characters from the

display.

In Menu mode, select the

highlighted menu option or

confirm input.

In Menu mode, cancel input and

return the phone to Idle mode.

In Music player, play or pause

music. Press and hold to stop

playback.

Enter numbers, letters, and

some special characters.

In Idle mode, press and hold

[1] to access your voicemail

server. Press and hold [0] to

enter an international call

prefix.

Return to the previous file

during music playback. Moves

backward in a file when held

down.

Enter special characters.

Skip to the next file during

music playback. Skips forward

in a file when held down.

In Idle mode, press and hold

[ ] to activate or deactivate

Silent mode. Press and hold [ ]

to enter a pause between

numbers.

Make or answer a call.

In Idle mode, retrieve numbers

recently dialled, missed, or

received.

Adjust the phone volume.

In Idle mode, adjust the key

tone volume. With the phone

closed, press and hold to turn

on tne display.

Display

Layout

Call in progress

Out of your service area;

you cannot make or

receive calls

Icons

display various

icons.

Text and graphics

display messages,

instructions, and

information you

enter.

Connected to Internet

Connected to a secured

web page

Synchronised with PC

Soft key function

indicators

show the current

functions assigned

to the soft keys.

Contacts

Call diverting feature

activeꢀp. 88

Home Zone, if registered

for the appropriate

service

Icons^*

Received signal strength

GPRS network

Office Zone, if registered

for the appropriate

service

Connecting to GPRS

network

Transferring data in GPRS

network

Roaming network

SMS message

MMS message

SOS message

E-mail

EDGE network

Connecting to EDGE

network

Transferring data in EDGE

network

Voicemail

Get started

Access menu functions

Bluetooth hands-free car

kit or headset

Use the

The roles of the soft keys vary

connectedꢀp. 91

depending on the function

you are using. The bottom

line of the display indicates

their current role.

soft keys

Bluetooth activeꢀp. 91

Music playback in

progress

Music playback paused

Memory card inserted

ꢀp. 25

Select

Back

Alarm set

ꢀ

Silent mode (Vibration)

Silent mode (Mute)

p. 46

Call ringer set to vibrate

Mute mode, during a call

Battery power level

Press the left

soft key to select

the highlighted

option.

Press the right

soft key to

return to the

previous menu

level.

* Depending on your country or service provider,

the icons shown on the display may vary.

Customise your phone

Select an

option

1. Press a desired soft key.

2. Press the Navigation keys

to move to the next or

previous option.

1. In Idle mode, press

Menu> and select

Display

language

Settings

settings

→

Phone

Language

3. Press <Select> or

[Centre] to confirm the

function displayed or

option highlighted.

2. Select a language.

1. In Idle mode, press

Call ringer

melody

Menu> and select

4. To exit, choose either of

the following methods.

Settings

settings

→

Sound

→

Incoming

call

→

Ringtone.

•

Press <Back> to

move up one level.

Press [ ] to return

to Idle mode.

2. Select a ringtone

category.

•

3. Select a ringtone.

4. Press <Save>.

Use

Press the number key

corresponding to the option

you want. For the menu

numbers 10, 11, and 12,

shortcuts

press [0], [ ] and [ ]

respectively.

Get started

You can set wallpaper for the

idle screen.

You can set the Navigation

keys to function as shortcuts

to access your favourite

menus.

Idle mode

wallpaper

shortcuts

1. In Idle mode, press

<Menu> and select

Settings

settings

Main display

→

Display

Wallpaper

1. In Idle mode, press

→

<Menu> and select

Settings

settings

→

Phone

Shortcuts

2. Select an image or video

category.

2. Select a key.

3. Select an image or a

video clip.

3. Select a menu to be

assigned to the key.

4. Press <Select>.

You can set up a menu of

your own favourite menu

items.

My Menu

5. Press <Save>.

You can change the colour for

the display components, such

as title bars and highlight

bars.

Menu mode

skin colour

To set a My menu item:

1. In Idle mode, press

Menu> and select

Settings

settings

→

Phone

1. In Idle mode, press

→

My menu

<Menu> and select

Settings

settings

→

Display

Skin

2. Select a colour pattern.

2. Select an item to be

changed.

You can protect the phone

against unauthorised use with

a phone password. The phone

will require the password on

power-up.

Phone lock

3. Select the menu item you

want.

To access a My menu item:

1. In Idle mode, press [Up].

2. Scroll to an item.

1. In Idle mode, press

Menu> and select

Settings Security

→

Change password

3. Press [Centre].

2. Enter the default

password, 00000000

You can switch the phone to

Silent mode to avoid

disturbing other people.

Silent

mode

and press <OK>.

3. Enter a new 4- to 8-digit

password and press

Press and hold [ ] in Idle

mode.

<OK>.

4. Enter the new password

again and press <OK>.

5. Select Phone lock

6. Select Enable

7. Enter the password and

press <OK>.

Make/Answer calls

Step outside the phone

Begin with your camera, the music player, the

web, and other special features

1. In Idle mode, enter an

Make a call

area code and phone

number.

Use the camera

2. Press [ ].

3. To end the call, press [

]

1. Open the phone.

Take a

photo

to unlock the keypad and

press <Cancel> or [ ].

2. In Idle mode, press and

hold [ ] to turn on the

camera.

1. When the phone rings,

press [ ].

Answer

a call

3. Aim the lens at the

subject and make any

desired adjustments.

2. To end the call, press [

to unlock the keypad and

press [ ].

]

4. Press [ ] or [Centre] to

take a photo. The photo is

saved automatically.

Press [ / ].

Adjust the

volume

during

5. Press <Preview> to take

another photo.

a call

1. In Idle mode, press

Menu> and select My

files Images My

photos

1. In Idle mode, press

Menu> and select My

files Videos My

video clips

View a

photo

Play

a video

→

2. Select the photo you

want.

2. Select the video you

want.

Play music

1. In Idle mode, press and

hold [ ] to turn on the

camera.

Record

a video

Use these methods:

Copy music

2. Press [1] to switch to

•

Download from the

wireless web p. 49

files to the

phone

Record mode.

ꢀ

3. Press [ ] or [Centre] to

start recording.

•

Download from a

computer using the

optional Samsung PC

4. Press [ ] or < > to

stop recording. The video

is saved automatically.

StudioꢀSamsung PC

Studio User’s Guide

•

Receive via Bluetooth

5. Press <Preview> to

ꢀp. 93

record another video.

Copy to a memory card

and insert the card into

the phone.ꢀp. 24

Step outside the phone

1. In Idle mode, press and

•

: skips to the next

file. Skips forward in a

file when held down.

Centre: opens the

play list.

Createa

play list

hold [MP3].

2. Press <Options> and

•

select Add music from

→

Phone or Memory card

/ : adjusts the

volume.

3. Press [Centre] to select

the files you want and

press <Select>.

3. Press and hold [ ] to

stop playback.

4. Press <Back> to return

to the music player

screen.

Browse the web

Using a built-in web browser, you can easily

access the wireless web to get a variety of

up-to-date services and information and to

download web content.

1. From the music player

screen, press [ ].

Play music

files

2. During playback, use the

following keys:

In Idle mode, press [Centre].

Launch

•

: pauses or

the web

browser

resumes playback.

•

: returns to the

previous file. Moves

backward in a file

when held down.

3. Specify contact

•

To scroll through browser

items, press [Up] or

[Down].

Navigate

the web

information: First name,

Last name, Mobile, Home,

Office, Fax, Other, Email,

Caller ID, Ringtone,

•

To select an item, press

[Centre].

Group, and Note.

To return to the previous

page, press <Back>.

4. Press <Save> to save the

contact.

To move to the next page,

press <Options> and

To the SIM card:

select Go

→

Forward.

1. In Idle mode, enter a

phone number and press

•

To access browser options,

press <Options>.

Options>.

2. Select Save contact

SIM New

3. Enter a name.

→

Use Phonebook

→

To the phone’s memory:

Add a

contact

4. Press <Save> to save the

1. In Idle mode, enter a

phone number and press

contact.

Options>.

2. Select Save contact

Phone New

number type.

→

Step outside the phone

Send messages

1. In Idle mode, press

Contacts>.

Find a

contact

1. In Idle mode, press

Send a text

message

(SMS)

2. Enter the first few letters

of the name you want.

Menu> and select

Messages Create

Text

→

message

3. Select a contact.

4. Scroll to a number and

2. Enter the message text.

press

[

]

to dial, or

press [Centre] to edit

contact information.

3. Press <Options> and

select Save and send or

Send only

1. In Idle mode, press

4. Enter destination

numbers.

Create and

send a

name card

Menu> and select

Phonebook My

namecard

→

5. Press [Centre] to send the

message.

2. Specify your contact

information.

1. In Idle mode, press

Send a

3. Press <Save> to save

Menu> and select

Messages Create

Multimedia

multimedia

message

(MMS)

the name card.

→

message

4. To send the name card,

press <Options> and

select Send via

sending method.

→

2. Select Subject

3. Enter the message

subject and press

[Centre].

1. In Idle mode, press

Menu> and select

Messages Create

message Email

2. Select Subject

Send an

e-mail

→

4. Select Image and video

or Sound

5. For Image and video

3. Enter the e-mail subject

and press [Centre].

select Add image or Add

video and add an image

or video clip.

4. Select Message

5. Enter the e-mail text and

press [Centre].

For Sound, select Add

sound and add a sound

clip.

6. Select File attached

7. Add image, video, sound,

music files, or document

files.

6. Select Message

7. Enter the message text

and press [Centre].

8. Press <Options> and

select Send

9. Enter e-mail addresses.

9. Enter destination

10.Press [Centre] to send

the e-mail.

numbers or addresses.

10.Press [Centre] to send

the message.

Step outside the phone

View messages

From the Inbox:

1. In Idle mode, press

When a notification appears:

View a text

message

Menu> and select

1. Press <View>.

Messages

messages

→

2. Select the message from

the Inbox.

→

Inbox

2. Select an MMS message

From the Inbox:

(

1. In Idle mode, press

Menu> and select

1. In Idle mode, press

Menu> and select

View an

e-mail

Messages

messages

→

Inbox

Messages

messages

→

2. Select an SMS message

inbox

(

2. Select an account.

When a notification appears:

1. Press <View>.

3. Press <Yes> to download

View a

multimedia

message

new e-mails or headers.

4. Select an e-mail or a

header.

2. Press <Options> and

select Retrieve

5. If you selected a header,

press <Options> and

select Retrieve to

retrieve the body of the

e-mail.

3. Select the message from

the Inbox.

Use Bluetooth

3. Enter a Bluetooth PIN or

the other device’s

Your phone is equipped with Bluetooth

technology, enabling you to connect the

phone wirelessly to other Bluetooth devices

and exchange data with them, talk hands-

free, or control the phone remotely.

Bluetooth PIN, if it has

one, and press <OK>.

When the owner of the

other device enters the

same code, pairing is

complete.

1. In Idle mode, press

Turn on

Bluetooth

Menu> and select

Settings Bluetooth

Activation On

2. Select My phone’s

visibility On to allow

→

1. Access an application,

→

Send data

Phonebook

Memo, or Calendar

My files,

→

2. Scroll to an item.

other devices to find your

phone.

3. Press <Options> and

select Send via

Bluetooth

4. Select a device.

5. For Phonebook, select

→

1. In Idle mode, press

Search for

and pair

with a

Bluetooth

device

Menu> and select

Settings Bluetooth

My devices Search

→

which data you want to

send.

for new devices

2. Select a device.

6. If necessary, enter the

Bluetooth PIN and press

<OK>.

Step outside the phone

To receive data via Bluetooth,

your phone’s Bluetooth

feature must be active.

•

Do not remove a card

from the phone or turn off

the phone while data is

being accessed or

transferred. This could

result in loss of data and/

or damage to the card or

phone.

Receive

data

1. When a device attempts

to access your phone,

press <Yes> to permit

the connection.

2. If necessary, press

•

Do not subject cards to

strong shocks.

<Yes> to confirm that

you are willing to receive.

Do not touch card

terminals with your

fingers or metal objects.

If dirty, wipe the card with

a soft cloth.

Use a memory card

You can use an optional microSD memory

card to increase your phone’s memory

capacity.

•

Keep cards away from

small children or pets.

•

Frequent erasing and

writing will shorten a

card’s lifespan.

Important

memory

card

Do not expose cards in a

place subject to electro-

static discharge and/or

electrical noise.

information

1. Slide the card into the

card slot, with the label

side face down.

Using a card adapter and a

USB card reader/writer, you

can read the card on a PC.

Insert a

memory

card

Use a card

adapter

1. Insert a memory card into

a card adapter, and then

the adapter into a card

reader/writer.

2. Plug the USB connector of

the card reader/writer

into the USB port on your

PC.

2. Press the card until it

locks into place.

3. Access the appropriate

memory disk and copy to

and from the card.

1. Press the card so that it is

disengaged from the

phone.

Removethe

memory

card

2. Slide the card out of the

slot.

Step outside the phone

Watch the phone display on a

You can view the display of your phone on a

TV screen by connecting the phone and TV

with a TV out cable. This enables you to

enjoy the photos, videos and music stored in

the phone’s memory with your family or

friends on a larger screen.

1. With the TV switched on,

connect your phone to the

TV with a TV out cable, as

shown.

Transfer

phone

display to

a TV

•

Depending on your

Important

information

particular TV model, the

location and shape of the

video input and audio

output ports may vary.

Match cable connector

and TV port colours.

2. Switch the TV to External

Input mode.

The display switches to

TV Out mode and you can

view the phone’s display

on the TV screen.

•

Depending on the video

system, the image may

vibrate or in some other

way be less than optimal.

Depending on the video

quality, some video clips

may not display.

3. If necessary, set the video

system for your TV in the

TV-out settings menu.

•

ꢀp. 86

4. Access the application

you want and open files.

You cannot use a

Bluetooth stereo headset

or the zooming feature in

TV Out mode.

Using AB mode

Press the appropriate key until the character

you want appears on the display.

Enter text

AB, T9, Number, and Symbol modes

You can enter text for some features, such

as Messages, Phonebook, or Calendar, using

AB mode, T9 mode, Number mode, and

Symbol mode.

Characters in order displayed

Key

Upper case

Lower case

Changing the text input mode

•

Press and hold [ ] to switch between T9

mode ( ) and AB mode ( ).

Depending on your country, you may

also be able to access an input mode for

your specific language.

•

Press [ ] to change case or switch to

Number mode (

Other AB mode operations

Press and hold [ ] to switch to Symbol

mode.

•

To enter the same letter twice or to enter

a different letter on the same key, wait

for the cursor to move to the right

automatically or press [Right]. Then,

enter the next letter.

•

Press [ ] to insert a space.

Enter text

•

Press the Navigation keys to move the

cursor.

For example, Of and Me use [6] and [3].

4. Press [ ] to insert a space and enter the

next word.

•

Press [ ] to delete characters one by

one. Press and hold [ ] to clear the

display.

Other T9 mode operations

•

Press [1] to enter periods or apostrophes

automatically.

Using T9 mode

T9 is a predictive text input mode that

allows you to key in any character using

single keystrokes.

•

Press [ ] to insert a space.

Press the Navigation keys to move the

cursor.

•

Press [ ] to delete characters one by

one. Press and hold [ ] to clear the

display.

Entering a word in T9 mode

1. Press [

Press each key once for each letter.

For example, press [ ], [ ], [ ], [

and [ ] to enter Hello in T9 mode.

2] to [9] to start entering a word.

Adding a new word to the T9

dictionary

5],

This feature may not be available for some

languages.

T9 predicts the word that you are typing,

and it may change with each key that

you press.

1. Enter the word that you want to add.

2. Press [0] to display alternative words for

2. Enter the whole word before editing or

deleting characters.

your key presses. When there are no

more alternative words, Add appears on

the bottom line.

3. When the word displays correctly, go to

step 4. Otherwise, press [0] to display

alternative word choices for the keys

that you have pressed.

3. Press <Add>.

4. Enter the word you want using AB mode

and press <OK>.

Using Number mode

Number mode enables you to enter

numbers.

Call functions

Advanced calling features

Press the keys corresponding to the digits

you want.

Making a call

1. In Idle mode, enter the area code and

phone number.

Using Symbol mode

Symbol mode enables you to insert symbols.

• Press [ ] to clear the last digit or

press and hold [ ] to clear the

whole display.

• Press and hold [ ] to enter a

pause between numbers.

Press

scroll to a symbol

set

the Navigation keys.

2. Press [ ].

select a symbol

the corresponding

number key.

The phone locks the keypad to avoid

accidental key presses during a call. To

use a key, first unlock the keypad by

pressing [ ].

clear the entered

symbols

[

3. When you want to end the call, press

insert the symbols

<OK>.

<Cancel> or [ ].

Making an international call

1. In Idle mode, press and hold [

0]. The

character appears.

2. Enter the country code, area code, and

phone number, then press [ ].

Call functions

Redialling recent numbers

1. In Idle mode, press [ ] to display the

list of recent numbers.

Answering a call

When you receive an incoming call, the

phone rings and displays the incoming call

image.

2. Scroll to the number you want and press

[

Press <Accept> or [ ] to answer the call.

Making a call from Phonebook

Tips for answering a call

Once you have stored a number in

Phonebook, you can dial the number by

•

When Anykey answer is active, you can

press any key, except for <Reject> and

selecting it from Phonebook.ꢀp. 35

[

].ꢀp. 85

You can also use the speed dial feature to

assign your most frequently dialled numbers

•

When Up in Slide settings is set to

Accept call, you can simply open the

to specific number keys.ꢀp. 38

phone.ꢀp. 84

You can quickly dial a number from the SIM

card using its location number assigned

when stored.

•

Press <Reject> or [ ] to reject a call.

Press and hold [ / ] to reject a call or

mute the ringer, depending on the

1. In Idle mode, enter a location number

and press [ ].

Volume key setting.ꢀp. 85

2. Press [Left] or [Right] to scroll through

other numbers.

Viewing missed calls

If you have missed calls, the screen displays

how many calls you have missed.

3. Press <Dial> or [ ] to dial the number

you want.

1. Press <View>.

2. If necessary, scroll through the missed

calls.

3. Press [ ] to dial the number you want.

Placing a call on hold/Retrieving

Press <Hold> to place a call on hold, or

press <Retrieve> to retrieve the call.

Using the headset

Use the headset to make or answer calls

without holding the phone.

Making a second call

You can make another call if your network

supports this function.

Connect the headset to the jack on the right

side of the phone. The button on the

headset works as follows:

1. Press <Hold> to put the call on hold.

2. Make the second call in the normal way.

Press

3. Press <Swap> to switch between the

calls.

redial the last call

answer a call

end a call

the button twice.

the button.

4. Press <Options> and select End held

call to end the call on hold.

5. To end the current call, press [ ].

Answering a second call

Options during a call

You can access a number of functions during

a call.

You can answer an incoming call while

already on the phone, if your network

supports this function and you have

activated the call waiting feature.

ꢀp. 89

Adjusting the volume during a call

Use [ / ] to adjust the earpiece volume

during a call.

1. Press [ ] to answer the call. The first

call is automatically put on hold.

2. Press <Swap> to switch between the

Press [ ] to increase the volume level and

[ ] to decrease the volume level.

calls.

Call functions

3. Press <Options> and select End held

•

Mute keys

tones off or on.

To communicate with answering

/Send keys: switch the key

call to end the call on hold.

4. To end the current call, press [ ].

machines or computerised telephone

systems, Send keys must be

selected.

Using the speakerphone feature

Use the external speaker on the back of the

phone to talk and listen with the phone a

short distance away. Press [Centre] and

then <Yes> to activate the speakerphone

feature. Press [Centre] again to switch back

to the earpiece.

Send DTMF: send the DTMF (Dual tone

multi-frequency) tones as a group. The

DTMF tones are the tones used in phones

for tone dialling, sounding when you

press the number keys. This option is

helpful for entering a password or an

account number when you call an

automated system, like a banking

service.

Using In-call options

Press <Options> to access the following

options during a call:

•

Speaker on/Normal: turn on the

speakerphone feature or switch back to

Normal mode.

•

Phonebook: access the contact list.

Switch to headset/Switch to phone:

transfer the call to a Bluetooth headset

or hands-free car kit, or back to the

•

Menu: access the phone's menu

functions.

phone.ꢀp. 91

Voice off/Voice on: switch off the

phone's microphone so that the other

person on the phone cannot hear you, or

switch it back on.

•

SIM service: access special services,

such as news, weather forecasts,

entertainment, and location services,

provided by your SIM card. This option is

available when you use a SIM card

supporting SIM Application Toolkit

menus.

Menu functions

All menu options listed

Call log (Menu 1)

Use this menu to view the calls you have

dialled, received, or missed, and the length

of the calls. You can also check the cost of

your calls, if your SIM card supports this

function.

•

Join: set up a multi-party call by adding

a caller on hold to a currently active call.

You can include up to 5 people on a

multi-party call.

Private: have a private conversation

with one multi-party call participant. The

other participants can converse with

each other. After the private

conversation, select Join to return both

private participants to the multi-party

call.

To access this menu, press <Menu> in Idle

mode and select Call log

Recent contacts (Menu 1.1)

This menu displays the most recent calls

dialled, received, or missed.

Accessing a call log

1. Press [Left] or [Right] to move to

another call type.

•

Removed: disconnect one multi-party

call participant.

2. Press [Up] or [Down] to scroll through

the call list.

3. Press [Centre] to view the details of a

call, or [ ] to dial a number.

Menu functions

Using call log options

Delete all (Menu 1.5)

While viewing call details, press <Options

to access the following options:

Use this menu to delete all of the records in

each call type.

•

Call: edit the number and dial it.

1. Press [Centre] to select the call types to

be cleared.

Add to Phonebook: save the number to

Phonebook.

2. Press <Delete>.

•

Send: send an SMS or MMS message to

the selected number.

3. Press <Yes> to confirm the deletion.

Call time (Menu 1.6)

Delete: delete the selected call log or all

logs.

This menu displays the time log for calls

made and received. The actual time invoiced

by your service provider will vary.

Missed calls (Menu 1.2)

This menu displays the most recent calls you

did not answer.

•

Last call time: check the length of your

last call.

Total dialled calls: check the total

length of all the calls you have dialled.

Dialled calls (Menu 1.3)

This menu displays the most recent calls you

have dialled.

Total received calls: check the total

length of all the calls you have received.

To reset the call timers, press <Reset>. You

need to enter the phone password.

Received calls (Menu 1.4)

This menu displays the most recent calls you

have received.

The password is preset to 00000000

You can change this password.ꢀp. 93

Call costs (Menu 1.7)

Phonebook (Menu 2)

This network feature displays the cost of

calls. This menu is available only if

supported by your SIM card. Note that this is

not intended to be used for billing purposes.

You can store phone numbers on your SIM

card and in your phone’s memory. The SIM

card and phone’s memory are physically

separate, but they are used as a single

entity called Phonebook.

•

Last call cost: check the cost of your

last call.

To access this menu, press <Menu> in Idle

•

Total cost: check the total cost of all of

your calls. If the total cost exceeds the

maximum cost set in Set max. cost

mode and select Phonebook

Contact list (Menu 2.1)

you must reset the counter before you

can make another call.

Use this menu to search for contacts in

Phonebook.

•

Max. cost: check the maximum cost

limit.

You can quickly access this menu by

pressing <Contacts> in Idle mode.

Reset counters: reset the cost

counters.

Finding a contact

1. Enter the first few letters of the name

that you want to find.

Set max. cost: set the maximum cost

authorised for your calls.

2. Select a contact from the list.

Price/Unit: set the price per unit that is

applied when the cost of your calls is

calculated.

3. Scroll to a number and press [ ] to

dial, or press [Centre] to edit contact

information.

Menu functions

•

Send via: send the contact via SMS,

MMS, e-mail, or Bluetooth.

Finding a contact in Idle mode

You can find contacts in Idle mode, by the

spelling of a contact name. The phone

searches for the contact names starting with

the letters labelled on any of the keys you

pressed.

Delete: delete the selected contact.

Create contact (Menu 2.2)

Use this menu to add a new contact to

Phonebook.

1. In Idle mode, press the number keys

containing the letters you want.

Storing a contact in the phone’s

memory

1. Select Phone

2. Press <Options> and select Search as

spelling

The phone searches Phonebook for the

matching contacts and shows results.

2. Change the settings or enter information

about the contact.

Using Phonebook options

•

First name/Last name: assign a

name.

While viewing contact details, press

•

Mobile

add a number in any type.

Email: assign an e-mail address.

Caller ID: assign an image or video

to alert you to a call from the person.

Ringtone: assign a ringtone to alert

you to a call from the person.

Group: assign the number to a caller

group.

/Home/Office/Fax/Other:

<Options> to access the following options:

•

Edit: edit contact information.

•

Send message: send an SMS or MMS

message to the selected number, or an

MMS message or e-mail to the selected

address.

•

Copy to: copy the contact to the phone’s

memory or to the SIM card.

Note: add a memo about the person.

3. Press <Save> to save the contact.

4. Select the ringtone line and set a ring

tone.

Storing a contact on the SIM card

1. Select SIM

2. Enter information about the contact.

5. Press <Save> to save the group.

•

Name: assign a name.

Phone number: add a number.

Location: assign a location number.

Adding members to a caller group

1. Select a group.

2. Press <Add>.

To assign a caller ID image or video,

ringtone, or group, the contact must

be saved to the phone’s memory.

3. Press [Centre] to select the contacts to

be added.

4. Press <Options> and select <OK>.

3. Press <Save> to save the contact.

Managing caller groups

While viewing the group list, press

Group (Menu 2.3)

<Options> to access the following options:

Use this menu to organise your contacts in

caller groups.

•

View: display the members of the

selected group.

Creating a new caller group

1. Press <Options> and select Create

•

Create group: add a new group.

Edit: change the group properties.

group

Send message: send an SMS, MMS, or

e-mail message to the group members

you want.

2. Enter a name for the group.

3. Select the caller ID line and set an image

or a video clip.

•

Delete: delete the selected group or all

groups. Group members, however, will

not be deleted from Phonebook.

Menu functions

Dialling speed dial entries

Speed dial (Menu 2.4)

In Idle mode, press and hold the appropriate

key.

Use this menu to assign a speed dial number

(2 to 9) for 8 of your most frequently dialled

numbers.

My namecard (Menu 2.5)

Assigning speed dial numbers

Use this menu to create a name card and

send it to other people.

1. Select a key location from

9. Key

is reserved for your voicemail server.

Saving your name card

2. Select a contact from the contact list.

The procedure for creating your name card

is the same as the one for saving a phone

3. Select a number, if the contact has more

than one number.

number in the phone’s memory.ꢀp. 36

Managing speed dial entries

Using name card options

From the Speed dial screen, press

After saving your name card, press

<Options> to access the following options:

•

Add: assign a number to an unassigned

key.

•

Edit: edit the name card.

•

Send via: send the name card via SMS,

MMS, e-mail, or Bluetooth.

•

View: check the name and number

assigned to a key.

•

Exchange namecard: exchange name

cards with another person via Bluetooth.

Change: assign a different number to a

key.

Delete: delete the name card.

Remove: clear the speed dial setting for

a key.

Own number (Menu 2.6)

Service number (Menu 2.8)

Use this feature to check your phone

numbers, or to assign a name to each of the

numbers. Changes made here do not affect

the actual subscriber numbers on your SIM

card.

Use this menu to view the list of Service

Dialling Numbers (SDN) assigned by your

service provider, including emergency

numbers and numbers for directory

enquiries. This menu is available if your SIM

card supports SDN.

Management (Menu 2.7)

1. Scroll to the number you want and press

View>.

Use this menu to manage contacts in

Phonebook.

2. Press <Dial> or [ ].

•

Save new contact to: select a default

memory location for saving contacts. If

you select Always ask, the phone will

ask you to select a memory location each

time you save a number.

Applications (Menu 3)

Use this menu to play music files or play

Java games. You can also use convenient

features, such as voice recorder, alarm

clock, calculator, converter, and stopwatch.

•

Copy all to: copy all of the contacts

stored on the SIM card to the phone’s

memory, or vice versa.

To access this menu, press <Menu> in Idle

Delete all: delete all of the contacts

from your phone’s memory, your SIM

card, or both.

mode and select Applications

Music player (Menu 3.1)

Memory status: check the number of

contacts you have stored in the phone’s

memory and on the SIM card.

Use this menu to enjoy music. First, you

need to save music files into your phone’s

memory or on a memory card.

Menu functions

Creating a play list

You can quickly access this menu by

pressing and holding [MP3] in Idle

mode.

1. From the music player screen, press

<Options> and select Add music from

→

Phone or Memory card

To enjoy high quality music, you can use an

optional Bluetooth stereo headset.

2. Press [Centre] to select the files to be

added and press <Select>.

Normal headsets and Bluetooth mono

headsets are not compatible with the

music player.

3. Press <Back> to return to the music

player screen.

Playing music files

1. From the music player screen, press

Downloading or receiving music files

You can play *.mp3, *.aac, *.aac+, *.m4a,

and *.wma files.

<Options> and select Play via.

2. Select Phone to use the phone speaker.

Use the following methods to save music

files to your phone’s memory:

Select Bluetooth stereo headset to

use a Bluetooth stereo headset and then

search for and connect the phone to the

headset.

•

Download from the wireless webꢀp. 49

Download from a computer using the

optional Samsung PC Studio

During playback, use the following keys:

ꢀ

Samsung PC Studio User’s Guide

Receive via an active Bluetooth

connection p. 93

Copy to a memory card and insert the

card into the phone. p. 25

The downloaded or received files are stored

in the Music folder. p. 71

Key

Function

•

ꢀ

Pauses or resumes playback.

Stops playback when held

down.

ꢀ

•

Transfer to Bluetooth stereo

headset Transfer to phone: switch

the sound output to a Bluetooth stereo

headset or the phone speaker.

Key

Function

Returns to the previous file.

Moves backward in a file when

held down.

Open playlist: access the play list of the

current album or album list. On the

album list, you can set up multiple

albums.

Skips to the next file. Skips

forward in a file when held

down.

Activate key: get a licence key when

the key for the selected DRM files

expires.

Centre

Opens the play list.

Turns 3D sound on or off.

Changes the equaliser mode.

Changes the repeat mode.

Turns Shuffle mode on or off.

Adjusts the volume level.

•

Remove from playlist: remove the

selected file from the play list.

Down

Left

Right

Settings: change the default settings for

playing music files.

Repeat mode: select a repeat mode.

Shuffle: set the music player to play

music at random.

Changes the playback

animation.

Music player overrides other sounds

set the music player to continue

playback even if you exit it.

Using music player options

From the music player screen, press

Equaliser: select an equaliser setting.

<Options> to access the following options:

3D sound: turn 3D sound on or off.

•

Play Pause: begin or pause playback.

Menu functions

Visualisation: change the playback

animation.

•

Remove: remove the selected file or all

files from the play list.

Volume: select a volume level.

•

Details: access the file properties.

•

Details: access the file properties.

Key management: manage the licence

keys you have acquired.

•

Key management: manage the licence

keys you have acquired.

Voice recorder (Menu 3.2)

Accessing the play list

Use this menu to record voice memos. A

voice memo can be up to one hour long.

From the music player screen, press

[Centre].

Recording a voice memo

1. Press [Centre] to start recording.

Press <Options> to access the following

options:

2. Speak into the microphone.

•

Play via: play the currently selected file.

Press [Centre] to pause or resume

recording.

Add music from: add files to the play

list.

3. Press <Stop> or [Down] to end

recording. The voice memo is saved

automatically.

•

Move to: move the selected file to

another album.

Copy to: copy the selected file to

another album.

4. Press [Centre] to review the voice

memo, or [Up] to record a new memo.

Move track in playlist: move the

selected file to the position you want

within the play list.

Playing a voice memo

1. From the Voice recorder screen, press

Options> and select Go to My voice

clips

2. Select a voice memo.

•

Activate key: get a licence key when

the key for the selected DRM file expires.

During playback, use the following keys:

•

Maximum 1 hour: You can record a

voice memo of up to one hour.

Key

Function

Image editor (Menu 3.3)

Centre

Left

Pauses or resumes playback.

Use this menu to edit your photos using

various editing tools.

Returns to the previous

memo. Moves backward in a

memo when held down.

Applying an effect

1. Press <Options> and select New

Right

Skips to the next memo.

Skips forward in a memo

when held down.

image

→

Open or Take photo.

2. Select a photo or take a new photo.

3. Press <Options> and select Effects

→

Adjusts the volume.

Stops playback.

an effect option.

Down

4. Press <Done>.

5. Press <Options> and select Save as

Changing the recording mode

6. Enter a new file name and press

You can change the recording mode of the

voice recorder. The maximum recording time

is determined by this setting. Before

Options> and select <OK>

Transforming

1. Select a photo or take a new photo.

2. Press <Options> and select Transform

recording a memo, press <Options> and

select Settings

→

a recording mode:

•

Limit for multimedia message: You

can record a voice memo for adding to

an MMS message.

→

an option:

•

Resize: change the photo size.

Rotate: rotate the photo 90 degrees.

Flip: flip the photo.

Limit for email: You can record a voice

memo for adding to an e-mail.

Menu functions

3. Press <Done>.

4. Adjust the position of the inserted item.

4. Press <Options> and select Save as

5. Press <Done>, or press <Options> and

select Done

6. Press <Options> and select Save as

7. Enter a new file name and <Options

and select <OK>

5. Enter a new file name and press

Options> and select <OK>

Cropping

1. Select a photo or take a new photo.

2. Press <Options> and select Crop

Merging a stamp effect

This editing tool allows you to make an

3. Move the cropping frame to the area of

the image you want.

outline stamp of a photo and then merge it

with another photo. You can use this tool to

create your own photo postcard by taking a

photo of a handwritten message and

merging it with a photo.

Press <Options> and select Resize to

change the frame size.

4. Press <Options> and select Done

5. Press <Options> and select Save as

1. Select a photo or take a new photo.

6. Enter a new file name and press

2. Press <Options> and select Merge

Options> and select <OK>

stamp. The background photo appears

in the image box next to

3. Press <Options> and select Add

image

Adding visual features

You can decorate photos by adding a frame,

an image, or a note.

4. Add a photo by selecting or taking a

photo. The added photo appears in the

1. Select a photo or take a new photo.

2. Press <Options> and select Insert

→

image box next to

stamp.

. This will be the

feature type.

3. Select an item, or enter text to be

inserted and press <Options> and

select <OK>

5. Press <Options> and select Merge. The

stamp photo is added to the background

photo as an outline.

Using Java application options

From the application list, press <Options

to access the following options:

6. Press <Options> to access the following

•

Start: launch the selected application.

stamp edit options:

Move to: move the application to

another folder.

•

Resize: change the stamp size.

Move: change the position of the

stamp.

•

Delete: delete the selected application

or all applications, except for the

embedded games.

•

Rotate: rotate the stamp.

Stamp colour: change the stamp

colour.

Protection: lock the application to

protect it from being deleted, or unlock

the application.

•

Shadow on: apply a shadow to the

stamp.

•

Details: access the application

properties.

7. When you have finished, press

Options> and select Done

Permissions: set permission settings

for services charging you additional

costs, such as network access and SMS.

8. Press <Options> and select Save as

9. Enter a new file name and press

Options> and select <OK>

•

Upgrade: upgrade the application to the

latest version.

Java world (Menu 3.4)

Send information via Text message

send the URL containing the application

via SMS.

Use this menu to access the embedded Java

games and downloaded Java applications.

Accessing an embedded game

•

Memory status: access memory

information for applications.

1. Select My games

→

a game.

2. If necessary, press [Centre].

Menu functions

•

Settings: select a connection profile to

be used for applications requiring

network access. You can also create or

Alarm (Menu 3.6)

Use this menu to set alarms. The alert type

for a normal alarm corresponds to the call

alert type settings. A wake-up alarm is not

affected by your sound settings.

edit a profile.ꢀp. 94

World clock (Menu 3.5)

Setting an alarm

1. Select the type of alarm.

2. Set each alarm option:

Use this menu to set your local time zone

and find out the current time in another part

of the world.

•

Alarm: activate the alarm.

Alarm time: enter the time for the

alarm to ring.

AM/PM: set AM or PM in 12-hour

format.

Viewing world time

1. From the world map, press [Left] or

[Right] to scroll to the city you want. As

the time line moves, the time and date of

the given zone display.

•

Repeat: select a repeat option.

Alarm tone: select an alarm tone.

2. Press [Centre] to save the city as your

local time zone.

3. Press <Save>.

Applying daylight saving time

Stopping an alarm

1. From the world map, press <Options

and select Apply daylight saving time

•

For a non-wake-up alarm, press any key.

2. Press [Centre] to select the time zones

you want.

•

For a wake-up alarm, press <Confirm

or [Centre].

3. Press <Save>.

Press any key, except for <Confirm>

and [Centre], to cause it to sound again

after 5 minutes. You can do this a

maximum of 5 times.

4. Press [Centre] to view the result.

Deactivating an alarm

1. Select the alarm you want to deactivate.

2. Select Off on the Alarm line.

3. Press <Save>.

5. If necessary, repeat from step 2 to

continue the calculation.

Convertor (Menu 3.8)

Setting alarms to sound when the

phone is off

Use this menu for common conversions,

such as currency and temperature.

From the Alarm screen, select Auto power

1. Select a converter.

→

On.

2. Press [Left] or [Right] to select the

original unit and press [Down].

If the phone is off when it is time for the

alarm to sound, the phone switches on and

sounds the alarm.

3. Enter the value to be converted and

press [Down].

•

Press [ ] to insert a decimal point.

Press [ ] to change the temperature

to above zero (+) or below zero (-).

Calculator (Menu 3.7)

Use this menu to perform basic arithmetic

functions, such as addition, subtraction,

multiplication, and division.

4. Press [Left] or [Right] to select the unit

to which you want to convert.

1. Enter the first number.

The equivalent value for the amount you

entered displays.

•

Press <.()> to insert a decimal point

or bracket.

For the currency converter, you can view

and set currency rates by pressing

•

Press [ ] or [ ] to move the cursor.

2. Press one of the Navigation keys to

access the math function you want.

View rate>.

3. Enter the second number.

Menu functions

Timer (Menu 3.9)

Key management (Menu 3.11)

Use this menu to set a period of time for the

phone to count down. The phone sounds an

alarm when the specified period of time

expires.

Use this menu to manage the licence keys

you have acquired to activate media

contents locked by DRM systems.

Press <Options> to access the following

options:

Starting the timer

•

View: open the corresponding media

content.

1. Press <Set>.

2. Enter the length of time you want to

Delete: delete the selected licence key

or all licence keys.

count down and press <Save>.

3. Press [Centre] to start counting down.

Go to my item: access the

corresponding file folder.

Stopping the timer

•

Press any key when the timer rings.

Details: access the properties of the

licence key.

•

Press [Centre] on the Timer screen to

stop the timer before it rings.

Memo (Menu 3.12)

Stopwatch (Menu 3.10)

Use this menu to make memos of important

things and manage them.

Use this menu to measure elapsed time. The

maximum time is 10 hours.

Creating a memo

1. Press <Options> and select Create

1. Press [Centre] to start the stopwatch.

2. Press [Centre] to check an interval. You

can repeat this step for a total of 4

intervals.

2. Enter the memo text and press [Centre].

Viewing a memo

Browser (Menu 4)

Select the memo you want to view.

The Wireless Application Protocol (WAP)

browser on your phone allows you to access

the wireless web. From the wireless web,

you can access up-to-date information and a

wide variety of media content, such as

games, wallpapers, ringtones, and music

files.

While viewing memo details, press

<Options> to access the following options:

•

Edit: change the memo text.

•

Send via: send the selected memo via

SMS, MMS, e-mail, or Bluetooth.

•

Delete: delete the memo.

To access this menu, press <Menu> in Idle

Memory status: check how many

memos you have created.

mode and select Browser

Home (Menu 4.1)

SIM AT (Menu 3.13)

Use this menu to connect your phone to the

network and load the homepage of the

wireless web service provider. You can also

press [Centre] in Idle mode.

This menu is available if you use a SIM AT

card that supports SIM Application Toolkit

menus and provides additional services,

such as news, weather, sports,

entertainment, and location services.

Available services may vary, depending on

your service provider’s plans. For details,

see your SIM card instructions or contact

your service provider.

Navigating the web

Press

scroll through

browser items

[Up] or [Down].

select a browser

item

[Centre], or

<Options> and

select Go to

Menu functions

•

Bookmarks: bookmark the current

page or access the bookmark list.

Press

return to the

Back>, or

Options> and

Back.

Send URL: send the URL of the current

page via SMS.

select Go

→

To SmartFit view/To Desktop view:

change the display mode of the browser.

move to the next

page

<Options> and

select Go

→

Forward.

•

Save: save the selected image or page.

Page details: access the page

properties.

Using page options

From any web page, press <Options> to

access the following options:

•

Browser options: change the various

settings for the browser.

•

Go to: access the linked web page.

Cache: change the cache mode or clear

the cache. The cache is a temporary

memory site that stores recently

accessed web pages.

Go to homepage: return to the

homepage.

•

Keys to buy: send a request for buying

a licence key for a DRM file. This option

will be available only when you access

the web browser from a message

containing a DRM file.

Cookies: change the cookie acceptance

mode or delete cookies. Cookies are

pieces of personal information sent to a

web server while navigating the web.

•

Enter URL: enter a URL address

manually.

Preferences: change the browser

display and sound settings.

Go: move backward or forward through

pages in history.

Certificates: access certificate

information.

Reload: reload the current page with

updated information.

About browser: access version and

Exiting the browser

Accessing a bookmarked page

Press [ ] to end the network connection

and close the browser.

Selecting a bookmark item launches the web

browser and accesses the associated web

page.

Enter URL (Menu 4.2)

Using bookmark options

Use this menu to manually enter a URL

address and access the associated web

page.

From the Bookmarks screen, press

<Options> to access the following options:

•

Go to: access the bookmarked web

page.

You can add the entered URL to the

bookmark list by selecting Add bookmark

•

Go to homepage: access the

homepage.

Bookmarks (Menu 4.3)

Enter URL: enter a URL address

manually.

Use this menu to save URL addresses in

order to quickly access web pages.

Edit bookmark: edit the URL address

and title of the bookmark.

Adding a bookmark

1. Press <Add>. If a bookmark has already

•

Add bookmark: add a new bookmark.

been saved, press <Options> and

Send URL: send the URL address of the

bookmark via SMS.

select Add bookmark

2. Enter a title for the bookmark and press

[Down].

•

Delete: delete the selected bookmark or

all bookmarks.

3. Enter a URL address and press <Save>.

Input language: change the language

to be used in input mode.

Input method: change the text input

mode.

Menu functions

Saved pages (Menu 4.4)

Streaming settings (Menu 4.8)

You can access the list of pages you have

saved while online.

Use this menu to select a connection profile

to be used for accessing your service

provider’s streaming service. This menu may

not be shown depending on your service

provider. You can also create or edit a

If you select a link on the page, the phone

switches to online to access the linked page.

profile.ꢀp. 94

History (Menu 4.5)

You can access the list of pages you have

accessed recently.

Messages (Menu 5)

Select a URL from the list to access the

corresponding web page.

Use the Messages menu to send and

receive text messages, multimedia

messages, and e-mails. You can also access

push messages and cell broadcast

messages.

Clear cache (Menu 4.6)

Use this menu to clear information stored in

the cache, a temporary memory site that

stores recently accessed web pages.

To access this menu, press <Menu> in Idle

mode and select Messages

Browser settings (Menu 4.7)

Create message (Menu 5.1)

Use this menu to select a connection profile

to be used for accessing the wireless web.

Use this menu to create and send messages.

You can also create or edit a profile.

ꢀp. 94

Text message (Menu 5.1.1)

Short Message Service (SMS) allows you to

send or receive text messages that may

include simple pictures, animated images,

and melodies.

Creating and sending an SMS message

•

Preview as vivid message: view the

message in 3D view mode. The phone

converts message text to 3D vivid

graphics. This option is available only

when the message consists of a single

page.

1. Enter your message and press [Centre].

• The maximum number of

characters allowed in a message

varies by service provider. If your

message exceeds the maximum

number of characters, the phone

will split the message.

•

Insert: add a template, Phonebook

entry, or bookmark.

Add image/Add animation/Add

melody: attach a simple image, an

animated image, or a melody.

• You can use various options by

pressing <Options>.

ꢀnext section

•

Attach: attach a Phonebook entry as a

name card or a calendar data as a data

format attachment.

2. Enter a destination number.

To send the message to more than one

recipient, fill in additional destination

fields.

•

Save in: save the message in another

message folder.

3. Press [Centre] to send the message.

Input language: change the language

to be used in T9 input mode.

Using options while composing an SMS

message

Input method: change the text input

mode.

While composing a message, press

<Options> to access the following options:

•

Send only: just send the message.

•

Save and send: save the message in

the Sentbox folder and then send it.

Menu functions

6. Select Add sound and add a sound clip.

Multimedia message (Menu 5.1.2)

7. Select the Message line.

Multimedia Message Service (MMS) delivers

messages containing a combination of text,

image, video, and audio, from phone to

phone or from phone to e-mail.

8. Enter the message text and press

[Centre].

9. When you have finished, press

Creating and sending an MMS message

<Options> and select Send.

1. Select the Subject line.

10.Enter a phone number or an e-mail

address.

You can use various options by

To send the message to more than one

recipient, fill in additional destination

fields.

pressing <Options> in each field.

ꢀnext section

2. Enter the message subject and press

[Centre].

11.Press [Centre] to send the message.

Using options while composing an MMS

message

3. Select the Image and video line.

4. Select Add image or Add video and

While composing a message, press

Options> to access the following options:

add an image or video clip.

• The maximum size allowed for a

message can differ, depending on

your service provider.

• Depending on the file type or DRM

(Digital Rights Management)

system, some files may not be able

to be forwarded.

•

Add: add the message subject or

message text.

•

Add image

add a image, video clip, or sound clip.

Change image Change video Change

sound: replace an added item.

/Add video/Add sound:

5. Select the Sound line.

•

Add memory card: add a file stored on

a memory card, if inserted.

Email (Menu 5.1.3)

You can create and send e-mails that include

text, audio, and images.

•

Edit: edit the message subject or text.

Preview: view the message as it will be

shown on the recipient’s phone.

Creating and sending an e-mail

1. Select the Subject line.

•

View: open the selected attachment.

You can use various options by

pressing <Options> in each field.

Send: send the message.

Save in: save the message in another

message folder.

ꢀnext section

2. Enter the e-mail subject and press

[Centre].

•

Add page: add pages. Move to each

page by pressing [Left] or [Right].

3. Select the Message line.

•

Delete page: delete an added page.

4. Enter the e-mail text and press [Centre].

5. Select the File attached line.

Edit page: change the duration of page

display or move the page forward among

the other pages.

6. Add media files or document files stored

in the Other files folder.

•

Attach: attach a Phonebook entry as a

name card, a calender data as a data

format attachment, or a document file

stored in the Other files folder.

Depending on the file type or DRM

(Digital Rights Management) system,

some files may not be able to be

forwarded.

Remove subject

Remove media Remove sound

Remove: remove an added item.

/Remove message/

7. When you have finished, press

<Options> and select Send.

Menu functions

8. Enter an e-mail address.

•

Attach: attach Phonebook entries as

name cards or calender data as data

format attachments.

To send the e-mail to more than one

recipient, fill in additional destination

fields.

Remove subject/Remove message/

Remove attachment: remove an

added item.

9. Press [Centre] to send the e-mail.

Using options while composing an

e-mail

Remove all attachments: delete all

attached files.

While composing an e-mail, press

Options> to access the following options:

My messages (Menu 5.2)

•

Add: add the subject of your e-mail or

e-mail text.

Use this menu to access messages you have

received, sent, or which have failed in

sending.

•

Edit: edit the subject or text.

Add image/Add video/Add sound/

Add music: add media files stored in

the phone’s memory.

Inbox (Menu 5.2.1)

This folder stores all of the messages you

have received, except for e-mails.

•

Add other files: add document files

stored in the Other files folder.

Viewing a message

The following icons may appear on the

message list to show the message type:

Memory card: add files stored on a

memory card, if inserted.

•

SMS

•

View/Play: open an attached file.

MMS

Send: send the e-mail.

MMS notification ( : Being

retrieved,

Save in: save the e-mail in another

message folder.

: Failed to retrieve)

•

Voicemail

•

Push message from web servers or

Configuration message, containing

network parameters from your

service provider

•

Forward: forward the message to other

people.

Zoom view: reduce the font size so that

you can view more text on one screen.

•

CB (Cell broadcast) message from

your service provider

View as vivid message/View as text

message: view the message in 3D view

mode or switch back to normal view

mode. This option is available only when

the message consists of a single page.

Delivery report for your sent

messages

• Depending on the DRM (Digital

Rights Management) system,

messages having web content may

not be able to be forwarded.

•

Delete: delete the message.

Move to phone/Move to SIM: move

the message between the SIM card and

the phone’s memory.

• A

icon next to a message means

that the message is of high priority.

A grey-coloured message icon

indicates low priority.

•

Cut address: extract URL addresses,

e-mail addresses, or phone numbers

from the message.

•

Cut media: save media content from

the message to your phone’s memory.

Using message options

While viewing a message, press <Options

to access the following options:

Lock/Unlock: lock the message to

protect it from being deleted, or unlock

the message. You can protect only those

messages stored in the phone’s memory.

SMS messages

•

Reply via text message: reply to the

sender via SMS.

•

Add to Block list: add the sender’s

number to the block list to reject the

messages from the sender.

•

Reply via multimedia message to

reply to the sender via MMS.

Menu functions

MMS messages

•

Lock/Unlock: lock the message to

protect it from being deleted, or unlock

the message.

•

Retrieve: retrieve the MMS message

from the MMS server.

Push messages

Reply via text message: reply to the

sender via SMS.

•

Go to URL: connect to the URL address

specified in the message.

Reply via multimedia message to

reply to the sender or all other recipients

of the message via MMS.

•

Cut address: extract URLs, e-mail

addresses, or phone numbers from the

message.

•

Forward: forward the message to other

people.

•

Delete: delete the message.

•

Delete: delete the message.

Lock/Unlock: lock the message to

protect it from being deleted, or unlock

the message.

Cut address: extract URL addresses,

e-mail addresses, or phone numbers

from the message.

Broadcast messages

•

Cut media: save media content from

the message to your phone’s memory.

•

Save: save the message to the phone’s

memory.

Lock/Unlock: lock the message to

protect it from being deleted, or unlock

the message.

•

Cut address: extract URL addresses, e-

mail addresses, or phone numbers from

the message.

•

Details: access the message properties.

•

Delete: delete the message.

Configuration messages

Delivery reports

•

Install: apply the configuration specified

in the message to your phone.

•

Cut address: extract URL addresses, e-

mail addresses, or phone numbers from

the report.

•

Delete: delete the message.

•

Delete: delete the report.

Lock Unlock: lock the message to

protect it from being deleted, or unlock

the message.

•

Zoom view: reduce the font size so that

you can view more text on one screen.

Cut address: extract URLs, e-mail

addresses, or phone numbers from the

message.

Drafts (Menu 5.2.2)

•

Delete: delete the message.

This folder stores messages you have saved

to send at a later time.

Move to phone/Move to SIM: move

the message between the SIM card and

the phone’s memory.

When you select a message, it opens in Edit

mode so that you can edit and send the

message.

•

Lock/Unlock: lock the message to

protect it from being deleted, or unlock

the message.

Outbox (Menu 5.2.3)

This folder stores messages that the phone

is attempting to send or has failed to send.

Sentbox (Menu 5.2.4)

This folder stores messages that you have

sent.

The following icons are available to show the

message status:

While viewing a message, press <Options

to access the following options:

•

Being sent

Failed to be sent

•

Forward: forward the message to other

people.

While viewing a message, press <Options

to access the following options:

Zoom view: reduce the font size so that

you can view more text on one screen.

•

Send again: retry sending the message.

Forward: forward the message to other

people.

Cut address: extract URLs, e-mail

addresses, or phone numbers from the

message.

Menu functions

•

Delete: delete the message.

Move to phone Move to SIM: move

the message between the SIM card and

the phone’s memory.

3. Select an e-mail or a header.

•

4. Press [Left] or [Right] to view other

pages in the e-mail.

5. Press [ ] or [ ] to view the previous or

next e-mail.

•

Lock/Unlock: lock the message to

protect it from being deleted, or unlock

the message.

Using e-mail options

While viewing the e-mail or header, press

Email inbox (Menu 5.2.5)

<Options> to access the following options:

This folder stores e-mails that you have

received.

•

Retrieve: retrieve the body of the

e-mail from the e-mail server.

Viewing an e-mail

•

View/Play: open the selected

attachment.

1. Select an e-mail account.

Save to my files: save the selected

attachment to the phone’s memory.

2. Press <Options> and select Check for

new email. The phone checks the e-

mail server and downloads new e-mails.

Reply to sender: send a reply to the

sender.

The following icons may appear on the

list to show the e-mail status:

Reply to all: send a reply to the sender,

or to the sender and all of the other

recipients.

•

Retrieved from the server

Being retrieved

Failed to be retrieved

•

Forward: forward the e-mail to other

people.

icon next to a message means

Delete: delete the e-mail.

that the message is of high priority.

A grey-coloured message icon

indicates low priority.

•

Add to filtering list: add the sender’s e-

mail address or subject to the Block list to

reject e-mails from that address or

containing that subject.

•

Rename folder: change the folder

name.

Delete: delete the selected folder.

Templates (Menu 5.3)

Cut address: extract URLs, e-mail

addresses, or phone numbers from the

e-mail.

Use this menu to make and use templates of

frequently used messages or passages.

•

Attached items: save the attached files

from the e-mail to your phone’s memory.

Text message templates (Menu 5.3.1)

You can create SMS templates with the

sentences you use frequently so that you

can retrieve and insert them when

composing an SMS message.

Lock/Unlock: lock the message to

protect it from being deleted, or unlock

the message.

•

Details: access the e-mail properties.

Creating a template

My folders (Menu 5.2.6)

1. Select an empty location.

Use this menu to create new folders and

organise your messages.

2. Enter a message and press <Options

and select <OK>

Using template options

Creating a folder

1. Press <Yes>.

From the template list, press <Options> to

access the following options:

2. Enter a folder name and press <OK>.

Using folder options

•

Edit: edit the selected template.

On the folder list, press <Options> to

Send message: create and send a new

access the following options:

message using the selected template.

•

Open: open the selected folder.

•

Delete: delete the selected template.

Create folder: add a new folder.

Add new: add a new template.

Menu functions

2. Press <Delete>.

Multimedia message templates

(Menu 5.3.2)

3. Press [Centre] to select the check box to

delete protected messages, and then

press <Yes>.

You can access embedded MMS templates or

ones you have saved so that you can use

them when composing an MMS message.

4. Press <Yes> to confirm the deletion.

From the template list, press <Options> to

access the following options:

Settings (Menu 5.5)

Use this menu to set up various options for

using the messaging service.

•

View: open the selected template.

Edit: create and send a new message

using the selected template.

Text messages (Menu 5.5.1)

•

Send message: send the selected

template.

You can configure SMS settings.

•

Sending options: set up the options for

sending SMS messages:

Delete: delete the selected template or

all templates, except for the embedded

ones.

Reply path: allow recipients to reply to

you through your SMS server.

Delivery report: set the network to

inform you when your messages have

been delivered.

Delete all (Menu 5.4)

Use this menu to delete messages in each

message folder all at once.

Bearer selection: select either GSM or

GPRS preferred, depending on your

network.

1. Press [Centre] to select the message

folders to be cleared.

Pressing the key twice displays the

message types so that you can specify

the ones to be cleared.

•

Receiving options: activate 3D view

mode for displaying received messages.

The phone will convert message text to

3D vivid graphics. This option is available

only when the message consists of a

single page.

•

Sending options: set up the options for

sending MMS messages:

Delivery report: set the network to

inform you when your messages have

been delivered.

•

Block list: store the phone numbers

from which you want to reject messages.

Current profile: check or select an SMS

setting profile.

Hide address: set your address to be

hidden from the recipient’s phone.

Profile settings: set the properties of

each profile.

Read reply: send a read-reply request

along with your messages.

Service centre: store or change the

number of your SMS server.

Priority: set the priority level of

messages.

Default destination: enter the default

destination. It will be automatically

entered on the recipient list.

Expiry date: set the length of time

messages are stored in the MMS server.

Delivery time: set a time delay before

Default type: set the default message

type. The network can convert the

messages into the selected format.

messages are sent.

Outgoing message size: select a

maximum size allowed for composing

messages.

Default validity: set the length of time

your messages are stored in the SMS

server.

•

Retrieving options: set up the options

for receiving MMS messages:

Setting name: enter a profile name.

Reject unknown senders: reject

messages from unknown senders.

Multimedia messages (Menu 5.5.2)

Allow adverts: accept advertisements.

You can configure MMS settings.

Menu functions

Allow information: accept information

messages.

•

Multimedia message profiles: select a

connection profile to be used for MMS.

You can also create or edit a profile.

Allow report: set the network to inform

the sender when a message has been

delivered to you.

ꢀp. 94

Emails (Menu 5.5.3)

Recep. in home network: determine if

your phone retrieves new messages

automatically when you are in your

home service area.

You can configure e-mail settings.

You cannot change e-mail profile and

account settings while an e-mail is being

sent or retrieved.

Reception when abroad: determine if

your phone retrieves new messages

automatically when you are roaming on

another network.

•

Sending options: set up the options for

sending e-mails:

Keep a copy: send a copy of your

Reception within home network or

abroad has the following options:

e-mail to your e-mail account.

Send delivery receipt: set the network

to inform you when your e-mails have

been delivered.

Manual: the phone displays

notifications. Use the Retrieve option

to manually download new messages.

Send read receipt: send a read-reply

request along with e-mails.

Automatic: the phone automatically

retrieves messages from the server.

Reply-To address: set an e-mail

address to receive read-reply messages

from recipients.

Reject: the phone rejects all

messages.

•

Block list: store phone numbers and e-

mail addresses from which you want to

reject messages.

Priority: select the priority level of

e-mails.

Attach your vCard: allow your contact

information to be attached to e-mails.

You must first create your name card.

Download limit: determine the

maximum size for incoming e-mails. Your

phone will reject e-mails that exceed the

specified size.

ꢀp. 38

Add signature: attach your name,

phone number, a simple memo, or a tag

line to your e-mails.

Download method: set whether the

phone downloads e-mail headers only or

e-mail headers and bodies both.

Edit name: edit the name in your

signature.

Keep in server: leave copies of e-mails

on the e-mail server after retrieving.

Edit number: edit the phone number in

your signature.

Download email latest first: set the

phone to download the most recent

e-mails first.

Edit note: edit the tag line in your

signature.

•

Block list: specify e-mail addresses or

subjects you want to reject.

•

Receiving options: set up the options

for receiving e-mails:

Email accounts: set up an e-mail

account and select an account to be

used.

Check interval: determine how often

the phone checks the server for incoming

e-mails. If you select Do not notify, use

the Check for new email option to

receive new e-mails manually.

Current account: check or select an

account.

Account settings: configure e-mail

accounts using different e-mail servers.

Set the options for each account:

Send read receipt: determine whether

or not the phone sends a read-reply for

incoming e-mails. If you select Reply

reminder, the phone asks you to send a

read-reply.

Account name: enter a name for the

currently selected account.

User name: enter a user name.

Menu functions

Email address: enter your e-mail

address.

Use SMTP authentication: enable

SMTP authentication, which requires

the user to login before sending

e-mails.

SMTP server: enter the IP address or

host name of the outgoing e-mail

server.

Same as POP3: select if you want the

SMTP server to have the same

parameters as the POP3 server.

SMTP port: enter the SMTP port

number.

SMTP user ID: enter the SMTP user

name.

Connect to POP3 server first

Connect to IMAP4 server first

connect to the POP3 or IMAP4 server

before connecting to the SMTP server

to send e-mails.

SMTP password: enter the SMTP

password.

APOP login: connect to the server by

using the APOP login scheme.

Protocol type: select the protocol for

the incoming e-mail server. The

remaining options depend on the

protocol type setting.

Email retrieval limit(1-100): set the

number of headers you will retrieve

from the server.

When the protocol type is POP3

Secure connection: use a secure

POP3 server: enter the IP address or

host name of the server that receives

your e-mail.

connection for the e-mail service.

When the protocol type is IMAP4

IMAP4 server: enter the IP address or

host name of the server that receives

your e-mail.

POP3 port: enter the POP3 port

number.

User ID: enter the POP3 user name.

IMAP4 port: enter the IMAP4 port

number.

Password: enter the POP3 password.

User ID: enter the IMAP4 user name.

Push messages (Menu 5.5.4)

Password: enter the IMAP4 password.

You can change the settings for receiving

push messages from the wireless web

server.

Use SMTP authentication: enable

SMTP authentication, which requires

the user to login before sending

e-mails.

•

Receive: set how your phone receives

push messages. If you select Black list

the phone will not accept messages from

the specified addresses on the Black list.

Same as IMAP4: select if you want

the SMTP server to have the same

parameters as the IMAP4 server.

•

Black list: manage blocked server

addresses.

SMTP user ID: enter the SMTP user

name.

Broadcast messages (Menu 5.5.5)

SMTP password: enter the SMTP

password.

You can change the settings for receiving

broadcast messages.

Include attachments: select this

option to receive attachments with

e-mails.

•

Receive: select to receive broadcast

messages, or not.

•

Channel list: indicate the channels from

which you wish to receive broadcast

messages. Please contact your service

provider for further details.

Email retrieval limit(1-100): set the

number of headers you will retrieve

from the server.

Secure connection: use a secured

connection for e-mail service.

•

Language: select the preferred

languages in which broadcast messages

display.

•

Email profiles: select a connection

profile to be used for e-mail services. You

can also create or edit a profile.ꢀp. 94

Menu functions

SOS messages (Menu 5.6)

My files (Menu 6)

You can send SOS messages to your family

or friends in case of an emergency. When

the phone closed, press [ / ] quickly four

or more times in seccession to send the SOS

message.

The My files menu allows you to access

images, videos, music files, and sound files

stored in the phone’s memory or on a

memory card.

To access this menu, press <Menu> in Idle

•

Message sending: select whether you

send message or not in an emergency.

mode and select My files

Tips for Digital Rights Management

•

Recipients: specify the home numbers

to which you want to send SOS

messages.

As a result of the Digital Rights Management

(DRM) system, some of the media items you

download from the Internet or receive by

MMS may require a licence key to access

them.

•

Repeat sending: select how many

times you send a message repeatedly.

Imcoming SOS alert: select whether

you allow incoming SOS alert or not.

You can acquire the key from the website

which owns the rights to the content; use

the Activate key option.

Text: check the preset SOS message

text.

Note the following icons on the list:

Memory status (Menu 5.7)

•

: Forwardable item with a valid key.

Use this menu to view the amount of

memory currently in use in each message

folder.

: Forwardable item without a valid

key.

•

: Unforwardable item with a valid

key.

: Unforwardable item without a valid

key.

Your service provider supports only count-

based or unlimited-access DRM files.

•

List: return to the image list.

Send via: send the file via MMS, e-mail,

or Bluetooth.

Images (Menu 6.1)

•

Set as: set the image as wallpaper for

the display or as a caller ID image for a

Phonebook entry.

This menu displays photos you have taken

and images you have downloaded, received

in messages, or imported from a computer.

Edit: edit the image using the Image

editor if it is a photo taken by the camera

on the phone.

Viewing an image

1. Select an image folder.

2. Select an image.

ꢀp. 43

Activate key: get a licence key when

the key for the selected DRM file expires.

Viewing a slide show

•

Delete: delete the file.

You can view your photos as a slide show, a

sequential presentation of each photo in the

current folder.

Rename: change the file name.

Move to: move the file to another folder

or to a memory card.

1. Select My photos

2. Press <Options> and select Slide

show

•

Copy to memory card: copy the file to

a memory card.

Visible to Bluetooth: share the file or

the files you want with other Bluetooth

devices.

3. Select an interval option.

The slide show begins.

4. Press <Stop> to stop the slide show.

•

Lock/Unlock: lock the file to protect it

from being deleted, or unlock the file.

Using image options

Print via Bluetooth: print the image by

connecting the phone to a printer via

While viewing an image, press <Options

to access the following options:

Menu functions

Bluetooth. Some printers may not be

compatible with the phone.

Key

Function

Right

Skips to the next file. Moves

forward in a file when held down.

•

Details: access the file properties.

•

Key management: manage the licence

keys you have acquired.

Adjusts the volume.

Stops playback.

Down

Videos (Menu 6.2)

This menu displays video clips you have

recorded, downloaded, received in

messages, or imported from a computer.

Using video options

After playback, press <Options> to access

the following options:

Video clips recorded on other devices,

such as camcorders, may not play

correctly.

•

List: return to the video list.

Send via: send the file via MMS, e-mail,

or Bluetooth.

•

Set as: set the video clip, if saved as a

3GP file, as wallpaper for the display or

caller ID image for a Phonebook entry.

Playing a video clip

1. Select a video folder.

2. Select a video clip.

Activate key: get a new licence key

when the key for the selected DRM file

expires.

During playback, use the following keys:

Key

Function

•

Delete: delete the file.

Centre

Left

Pauses or resumes playback.

Rename: change the file name.

Returns to the previous file.

Moves backward in a file when

held down.

Move to: move the file to another folder

or to a memory card.

•

Copy to memory card: copy the file to

a memory card.

downloaded, received in messages, or

imported from a computer.

Visible to Bluetooth: share the

selected file or the files you want with

other Bluetooth devices.

Playing a sound clip

1. Select a sound folder.

2. Select a sound clip. For a voice memo,

•

Lock/Unlock: lock the file to protect it

from being deleted, or unlock the file.

see Voice recorder

Using sound options

While playing a sound clip, press

.ꢀp. 42

•

Details: access the file properties.

Key management: manage the licence

keys you have acquired.

<Options> to access the following options:

•

List: return to the sound list.

Music (Menu 6.3)

•

Send via: send the file via MMS, e-mail,

or Bluetooth.

This menu displays music files you have

downloaded or imported from a computer.

•

Set as: set the file as your ringtone or

as a ringtone for a Phonebook entry.

Select a file. The music player opens.

ꢀp. 40

Activate key: get a new licence key

when the key for the selected DRM file

expires.

When you play a file from this menu,

without first adding it to the play list in

the music player, background play is not

supported.

•

Delete: delete the file.

Rename: change the file name.

Move to: move the file to another folder

or to a memory card.

Sounds (Menu 6.4)

This menu displays voice memos you have

recorded, and sound files you have

•

Copy to memory card: copy the file to

a memory card.

Menu functions

•

Visible to Bluetooth: share the

selected file or the files you want with

other Bluetooth devices.

Use the following keys to view the

document:

Key

Function

•

Lock/Unlock: lock the file to protect it

from being deleted, or unlock the file.

Up/Down/

Left/Right

Pans around the page.

•

Details: access the file properties.

Key management: manage the licence

keys you have acquired.

Centre

Fits the document to the

page size.

Zooms out.

Zooms in.

Other files (Menu 6.5)

Use this menu to view, without corruption,

various document files and files stored in the

phone’s memory. Available file formats are

DOC, XLS, PPT, PDF, and TXT.

Searches forward through

the document for the text

you want.

Viewing a document

Returns to the first page.

Select a file. Picsel File Viewer runs to open

the document.

Searches backward through

the document for the text

you want.

• Depending on the file size or memory

capacity of Picsel File Viewer, some

files may not open properly.

• If a document file contains languages

unsupported by Picsel File Viewer, the

content of the document will not

display correctly.

Returns to the previous

page.

Rotates the document.

Moves to the next page.

•

Search word: search for text in the

document.

Key

Function

Moves to the last page.

•

Rotate: rotate the document.

Shows or hides the map of

the current page.

Screen panning/Normal panning:

change the panning mode to by screen

or by preset pixel.

Changes the display to Full

screen view or Normal

screen view.

•

Flow mode: switch the screen to Flow

mode. The text is rearranged for easy

viewing in a text file (*.txt). You can

scroll through the text only by pressing

[Up] or [Down].

Using document options

While viewing a document, press

Hide controller/Show controller: hide

or show the shortcut tool bar of the file

viewer.

<Options> or <

> to access the following

options:

•

Full screen view/Normal view: view

the document on a full screen, or return

to Normal view mode.

•

Send via: send the file via MMS, e-mail,

or Bluetooth.

Move to memory card: move the file to

a memory card.

Thumbnail show/Thumbnail hide:

display or hide the map of the current

page.

Copy to memory card: copy the file to

a memory card.

•

Zoom: zoom in or out.

•

Delete: delete the selected file.

Fit to: fit the document to the page size,

screen width, or screen height.

Rename: change the file name.

Visible to Bluetooth: share the file or

the files you want with other Bluetooth

devices.

•

Go to: move to another page of the

document.

Menu functions

•

Lock/Unlock: lock the file to protect it

from being deleted, or unlock the file.

Selecting a day on the calendar

When you enter the Calendar menu, the

calendar in Month view appears with today’s

date indicated by an gray box.

•

Details: access the file properties.

Shortcuts: view the functions of the

keys you can use in Picsel File Viewer.

•

Press [Left] or [Right] to move by day.

Press [Up] or [Down] to move by week.

Press [ / ] to move by month.

Memory card (Menu 6.6)

Use this menu to access the files stored on a

memory card. This menu is shown only

when a memory card is inserted into the

phone.

Creating an item

You can store appointments, anniversaries,

and tasks on the calendar. More than one

item per day can be stored.

Memory status (Menu 6.7)

Entering an appointment

1. Select a date on the calendar.

Use this menu to view memory information

for media items in the phone’s memory or

on a memory card. For the phone’s memory,

press [Left] or [Right] to view the memory

status by size or number of items.

2. Press <Options> and select Create

Appointment

3. Enter information or change the settings:

→

•

Subject: enter a title for the

appointment.

Details: enter the appointment

details.

Start date and Start time: enter

the starting date and time for the

appointment.

Calendar (Menu 7)

The Calendar menu enables you to keep

track of your schedule.

To access this menu, press <Menu> in Idle

mode and select Calendar

•

AM/PM: select AM or PM in 12-hour

time format.

End date and End time: enter the

ending date and time for the

appointment.

AM/PM: select AM or PM in 12-hour

time format.

Location: enter information about

the appointed location.

Alarm: set an alarm for the

appointment.

Before: set how long before the

appointment the alarm is to alert

you.

Alarm tone: select an alarm tone.

Repeat: set the appointment to

recur and select a repeat unit.

Until: set the ending date, if the

appointment will recur.

3. Enter information or change the settings:

•

Occasion: enter information about

the anniversary.

•

Date: enter the date.

Alarm: select to set an alarm for the

anniversary.

•

Before: set how long before the

anniversary the alarm is to alert you.

Alarm time: enter the time for the

alarm to ring.

AM/PM: select AM or PM in 12-hour

time format.

•

Alarm tone: select an alarm tone.

Repeat every year: set the phone

to remind you of the anniversary

every year.

•

4. Press <Save> to save the anniversary.

•

Entering a task

1. Select a date on the calendar.

4. Press <Save> to save the appointment.

2. Press <Options> and select Create

Task

3. Enter information or change the settings:

→

Entering an anniversary

1. Select a date on the calendar.

2. Press <Options> and select Create

Anniversary

→

•

Task: enter information about the

task.

Menu functions

•

Start date: enter the starting date.

•

Send via: send the item via SMS, MMS,

e-mail, or Bluetooth.

Due date: enter the ending date.

Select priority: select a priority

level.

View by: change the view mode of the

calendar.

ꢀp. 77

4. Press <Save> to save the task.

•

Delete: delete the item.

Memory status: access memory

information for the items stored on the

calendar.

Consulting the calendar

Once you have created items, the type icons

and the number of items for a specific day

appear at the bottom of the calendar.

Using calendar options

On the calendar, press <Options> to access

the following options:

•

Appointment

Task

•

Anniversary

•

View by: change the view mode of the

calendar. next section

ꢀ

Viewing an item

1. Select a date on the calendar to display

the items for the day.

•

Create: add a new item.

Go to: select today’s date or enter a

specific date.

2. Select an item to view its details.

•

Event list: sort items by type of item.

3. Press [Left] or [Right] to access the

other items scheduled for the selected

day.

Delete: delete the items stored on the

calendar by using various deleting

options.

While viewing an item, press <Options> to

access the following options:

You can delete recurring items in Day

view only.

•

Edit: edit the item.

•

Missed alarm events: view items

whose alarms you have missed.

Create: add a new item.

•

Memory status: access memory

information for the items stored on the

calendar.

Camera (Menu 8)

You can use the camera module embedded

in your phone to take photos and record

videos.

Viewing items in a different mode

To access this menu, press <Menu> in Idle

mode and select Camera, or press and hold

You can change the calendar display to Day

view or Week view. Press <Options> and

[

]

in Idle mode.

select View by

→

a view mode.

• Do not take photos of people without

their permission.

• Do not take photos in a place where

cameras are not allowed.

Day view

You can view items for the selected date.

Select an item to view its details.

The following icons may display to indicate

the item status:

• Do not take photos in a place where

you may interfere with another

person’s privacy.

•

Alarm set

Recurring item

Taking a photo

Task priority (Red: high,

Blue: normal, Grey: low)

You can take photos in various modes. The

camera produces JPEG photos.

•

Completed task

When you take a photo in direct sunlight

or in bright conditions, shadows may

appear on the photo.

Week view

You can view items for the selected week. A

cell on the timetable indicates the presence

of a schedule item. Select a cell in the day

you want.

Menu functions

Taking a photo

1. Access the Camera menu or press and

Using camera options in Capture

mode

hold [

]

to turn on the camera.

In Capture mode, press <

following options:

> to access the

2. Make any desired adjustments.

•

Record video: switch to Record mode.

•

Press <

options.

> to access camera

next section

ꢀ

Shooting mode: take a photo in the

following modes:

Use the keypad to change the camera

settings or switch to other modes.

Single shot: take a photo in Normal

mode. You can select whether or not the

camera automatically saves a photo.

ꢀp. 79

3. Press [Centre] or [

]

to take a photo.

The photo is saved in the My photos

folder.

Multi-shot: take a series of action stills.

You can select the number of photos the

camera will take and the shooting speed.

4. To

Press

Options>.

p. 80

[Centre].ꢀp. 54

Mosaic shot: take several stills and

save them in one frame. You can select

the layout.

access photo

options

ꢀ

•

Effects: change the colour tone or apply

a special effect.

send the photo

by MMS

•

Frames: apply a decorative frame.

return to Capture

mode

Flash: Determines the use of the flash.

Timer: set a time delay before the

camera takes a photo.

•

Go to My photos: access the My

photos folder.

•

Camera settings: change the default

settings for taking a photo.

•

Camera shortcuts: view the functions

of the keys you can use in Capture

mode.

Size: select an image size.

Quality: select an image quality setting.

Viewfinder: select a preview screen.

Using the keypad in Capture mode

You can use the keypad to customise your

camera settings in Capture mode.

Shutter sound: select the sound that

you hear when you press the shutter

Key

Function

release key, [Centre] or [

Left/Right Adjusts the image brightness.

Zoom sound: turn the sound effect for

zooming on or off.

Up/Down

Zooms in or out.

Brightness sound: turn the sound

effect for brightness adjustment on or

off.

Flips the image vertically.

Shows the mirror image.

Switches to Record mode.

White balance: adjust the colour

balance of the image. You can make your

photo appear warmer or cooler.

ꢀp. 80

Changes the image size.

Changes the image quality.

Changes the shooting mode.

ISO: change the ISO setting, which

controls the sensitivity of your camera.

For low light situations, select a higher

ISO number. The higher the ISO number,

the faster the camera shutter functions

and the more sensitive the camera is to

light. Higher ISO settings may bring

some distortion to an image.

Changes the colour tone or

applies a special effect.

Changes the white balance.

Menu functions

•

Delete: delete the file.

Key

Function

Rename: change the file name.

Go to My photos: access the My

Selects a decorative frame.

Sets the timer.

photos folder.ꢀp. 69

•

Lock Unlock: lock the file to protect it

from being deleted, or unlock the file.

Changes the ISO settings.

Determine the use of the

flash.

Print via Bluetooth: print the image by

connecting the phone to a printer via

Bluetooth. Some printers may not be

compatible with the phone.

Goes to the My photos folder.

Changes the preview screen.

•

Details: access the file properties.

Using photo options

Recording a video

After saving a photo, press <Options> to

access the following options:

You can record a video of what is displayed

on the camera screen and save it.

•

View: access one of the multi-shot

photos.

Recording a video

•

Viewfinder: return to Capture mode.

1. In Capture mode, press [

1].

Send via: send the file via MMS, e-mail,

or Bluetooth.

2. Make any desired adjustments.

•

Press <

options.

> to access camera

next section

•

Set as: set the photo as wallpaper for

the display or as a caller ID image for a

Phonebook entry.

ꢀ

Use the keypad to change the camera

settings or switch to other modes.

ꢀp. 82

Edit: edit the photo using the Image

editor.ꢀp. 43

3. Press [Centre] or [

]

to start recording.

4. Press [Centre], < >, or [

]

to stop

•

Camcorder settings: change the

following settings for recording a video:

recording. The video is automatically

saved in the My video clips folder.

Recording mode: select a video

recording mode.

5. To

Press

Select Normal to record a video within

the limit of the currently available

memory. The video clip is saved in MP4

format.

play back the video

clip

[Centre].

access video options

<Options>.

Select Limit for multimedia

ꢀp. 82

messages/wallpaper to record a video

suitable for messaging or for setting as

wallpaper or caller ID image. The video

clip is saved in 3GP format.

return to Record mode

<Preview>.

Using camera options in Record mode

In Record mode, press <

following options:

> to access the

Size: select a frame size.

Quality: select an image quality setting.

Viewfinder: select a preview screen.

•

Take photo: switch to Capture mode.

Effects: change the colour tone or apply

a special effect.

Audio record: record audio with a video

clip.

•

Flash: determine the use of the flash.

Zoom sound: turn the sound effect for

zooming on or off.

Timer: set a time delay before the

camera starts recording.

Brightness sound: turn the sound

effect for brightness adjustment on or

off.

•

Go to My video clips: access the My

video clips folder.

Menu functions

White balance: adjust the colour

balance of the image. You can make your

video appear warmer or cooler.

Key

Function

Changes the colour tone or

applies a special effect.

•

Camcorder shortcuts: view the

functions of the keys you can use in

Record mode.

Changes the white balance.

Mutes or unmutes audio.

Sets the timer.

Using the keypad in Record mode

You can use the keypad to customise your

camera settings in Record mode.

Determines the use of the

flash.

Key

Function

Goes to the My video clips

folder.

Left/Right Adjusts the image brightness.

Up/Down

Zooms in or out.

Changes the preview screen.

Flips the image vertically.

Shows the mirror image.

Switches to Capture mode.

Using video options

After saving a video clip, press <Options

to access the following options:

ꢀp. 77

•

Viewfinder: return to Record mode.

Changes the frame size.

Send via: send the file via MMS, e-mail,

or Bluetooth.

Changes the image quality.

•

Set as: set the video clip, if saved as a

3GP file, as wallpaper for the display or a

caller ID image for a Phonbook entry.

Changes the video recording

mode.

•

Delete: delete the file.

•

AM/PM: select AM or PM in 12-hour

time format.

Rename: change the file name.

Go to My video clips: access the My

•

Time format: select a time format.

Date: enter the current date.

video clips folder.ꢀp. 70

•

Lock Unlock: lock the file to protect it

Date format: select a date format.

from being deleted, or unlock the file.

Calendar starting day: set which day

of the week the calendar starts with.

Details: access the file properties.

•

Auto update: activates the auto time

update feature. Your phone will read the

MCC (Mobile Country Code) from the

network and automatically update the

current time for the country that you are

in when you travel abroad.

Settings (Menu 9)

The Settings menu provides you with

various setting options to customise the

phone to your preferences and needs. You

can also reset the settings to their default

status.

Time information may not be updated

when you move to one time zone to

another within a country.

To access this menu, press <Menu> in Idle

mode and select Settings

Phone settings (Menu 9.2)

Many different features of your phone’s

system can be customised to suit your

preferences.

Time and date (Menu 9.1)

Use this menu to change the time and date

displayed on your phone. Before setting the

time and date, specify your time zone in the

Some menus may not be available,

depending on your service provider.

World clock menu.ꢀp. 46

•

Time: enter the current time.

Menu functions

Language (Menu 9.2.1)

Shortcuts (Menu 9.2.4)

Use this menu to select a language for the

display text. If you select Automatic, the

phone uses the same language as the SIM

card.

You can use the Navigation keys as

shortcuts to access specific menus directly

from Idle mode. Use this menu to assign a

shortcut to a key. [Up] is fixed as a shortcut

to My Menu mode.

Greeting message (Menu 9.2.2)

Assigning a shortcut menu

Use this menu to enter the greeting that is

displayed briefly when the phone is switched

on.

1. Select a key to be used as a shortcut

key.

2. Select a menu to be assigned to the key.

Slide settings (Menu 9.2.3)

Using shortcut options

Use this menu to set how the phone reacts

when you open it for an incoming call, and

when you close it while using a function.

Press <Options> to access the following

options:

•

Change: assign or change a shortcut

menu.

•

Up: set whether or not to answer a call

by opening the phone.

Remove: deactivate the shortcut

assignment to the selected key.

•

Down: set whether or not the phone

maintains the menu you are using when

you close the phone.

Remove all: deactivate all shortcut

assignments.

When you set Down to Continue

operation, the keypad lock works

only in Idle mode.

My menu (Menu 9.2.5)

You can set up a menu of your own using

your favourite menu items, which can be

easily accessed by pressing [Up] in Idle

mode.

•

Anykey answer: answer an incoming

call by pressing any key, except for

<Reject> and [ ].

Setting up My menu item

1. Select an item to be changed.

2. Select the menu item you want.

Using item options

Offline mode (Menu 9.2.8)

Use this menu to switch the phone to Offline

mode or back to Online mode.

Press <Options> to access the following

options:

Display settings (Menu 9.3)

Use this menu to change settings for the

display and backlight.

•

Assign: assign an item.

Change: change the selected item.

Remove: remove the selected item.

Remove all: remove all items.

Wallpaper (Menu 9.3.1)

You can set up the idle screen on the display.

•

Main display: select an image or video

clip to be displayed on the display.

Volume key (Menu 9.2.6)

Use this menu to set whether the phone

mutes the call ringer or rejects a call if you

press and hold [ / ] when a call comes in.

Calendar wallpaper: set the phone to

display the calendar.

Text position: select a text position. If

you do not want to display text in Idle

Extra settings (Menu 9.2.7)

mode, select Off

You can turn the automatic redialling or

answering feature on or off.

•

Text mode: select a font style.

Text colour: select a font colour.

•

Auto redial: set the phone to make up

to ten attempts to redial a phone number

after an unsuccessful call.

Graphic logo: set the phone to display a

graphic icon instead of the service

Menu functions

provider’s logo on the idle screen. This is

only available if a graphic icon has been

received in a message.

Use this menu to select a video system for a

TV.

Sound settings (Menu 9.4)

Main menu style (Menu 9.3.2)

Use this menu to customise various sound

settings.

You can select a display style for the main

menu screen.

Incoming call (Menu 9.4.1)

Skin (Menu 9.3.3)

Use this menu to change the sound settings

for incoming calls.

You can select a skin colour pattern for Menu

mode.

•

Ringtone: select a ringtone to be used

for the call ringer.

Brightness (Menu 9.3.4)

You can adjust the brightness of the display

for varying lighting conditions.

•

Volume: select a ringtone volume.

Alert type: specify how you are to be

informed of incoming calls.

Dialing display (Menu 9.3.5)

Use this menu to select a font type, and

colour and size for the numbers, and

background colour of the display while

dialling.

Keypad tone (Menu 9.4.2)

Use this menu to select the tone that the

phone sounds when you press a key.

You can adjust the key tone volume using

[ / ] in Idle mode.

Show caller information (Menu 9.3.6)

Use this menu to set the phone to display

missed call notifications with the most

recently missed caller’s information.

Message tone (Menu 9.4.3)

Use this menu to change the sound settings

for incoming SMS messages, MMS

TV-out settings (Menu 9.3.7)

messages, e-mails, and broadcast messages

individually.

•

Minute minder: set the phone to beep

every minute during an outgoing call to

keep you informed of the length of your

call.

•

Tone: select one of several message

tones.

•

Connection tone: set the phone to

beep when an outgoing call connects to

the system.

Alert type: specify how you are to be

informed when a message comes in.

Repetition: specify how often the phone

informs you of a new message.

Alert on call: set the phone to beep

when you receive a new message or

when the time for an alarm comes during

a call.

Power on/off (Menu 9.4.4)

Use this menu to select the melody that the

phone sounds when it is switched on or off.

•

Indicative tone: set the phone to beep

when a Bluetooth pop-up dislpays.

Slide tone (Menu 9.4.5)

Use this menu to select the tone that the

phone sounds when you open or close the

phone.

Light settings (Menu 9.5)

Use this menu to change the settings for the

light.

Silent mode (Menu 9.4.6)

Backlight time (Menu 9.5.1)

Use this menu to set how the phone acts to

alert you to a specific event while in Silent

mode.

You can select the length of time the

backlight or display stays on.

•

Normal: select the length of time the

backlight stays on.

Extra tones (Menu 9.4.7)

Use this menu to customise additional tones

for the phone.

•

Dimmed: select the length of time the

display stays on in Dim mode after the

Menu functions

backlight turns off. After a specified time,

the display turns off.

•

Busy: divert calls when you are on

another call.

No reply: divert calls when you do

not answer the phone.

Unreachable: divert calls when you

are not in your service area or when

your phone is switched off.

Cancel all: cancel all call diverting

options.

Keypad light (Menu 9.5.2)

Use this menu to set how the phone controls

the use of the keypad light. Select one of the

following options in the Use at line:

•

Any time: the keypad light is always

used.

•

Night time: the keypad light is used

only between 5:00 PM and 9:00 AM.

2. Select the type of calls to be diverted.

3. Select Activate. To deactivate call

Custom time: you can specify the time

period that the keypad light is used.

diverting, select Deactivate

4. Move to the Divert to line.

5. Enter the number to which calls are to be

diverted.

Network services (Menu 9.6)

Use this menu to access network services.

Please contact your service provider to

check their availability and subscribe to

them, if you wish.

6. If you selected No reply, move to the

Seconds line and select the length of

time the network delays before diverting

a call.

Call diverting (Menu 9.6.1)

7. Press <Select>.

This network service reroutes incoming calls

to a phone number that you specify.

Call barring (Menu 9.6.2)

This network service allows you to restrict

your calls.

1. Select a call diverting option:

•

Divert always: divert all calls.

1. Select a call barring option:

•

All outgoing calls: prohibit all

outgoing calls.

International: prohibit international

calls.

International except home: only

allow calls to numbers within the

current country when you are

abroad, and to your home service

area.

Call waiting (Menu 9.6.3)

This network service informs you when

someone is trying to reach you while you are

on another call.

1. Select the type of calls to which call

waiting option will apply.

2. Select Activate. To deactivate call

waiting, select Deactivate

Network selection (Menu 9.6.4)

•

All incoming calls: prohibit

incoming calls.

Incoming while abroad: prohibit

incoming calls when you use your

phone outside of your home service

area.

Cancel all: cancel all call barring

settings, allowing calls to be sent and

received normally.

Change barring password: change

the call barring password obtained

from your service provider.

This network service allows you to manually

select the network to be used while roaming

outside of your home area, or to let the

network be chosen automatically.

You can select a network other than your

home network only if there is a valid

roaming agreement between the two.

•

Caller ID (Menu 9.6.5)

This network service allows you to hide your

phone number from the person you are

calling. If you select Default, the phone will

use the default setting provided by the

network.

2. Select the type of calls to be barred.

3. Select Activate. To deactivate call

barring, select Deactivate

Some networks may not allow you to

change this setting.

4. Enter the call barring password supplied

by your service provider and press

<Select>.

Menu functions

•

Outside access: enable calls to

Voice mail server (Menu 9.6.6)

numbers other than those in the closed

user group. This feature depends on the

nature of your CUG subscription.

Use this menu to store the number of the

voicemail server and access your voicemails.

You must store the voicemail server

number before accessing the server. Your

service provider can give you the

number.

Default group: enable the default CUG,

if you have set one with your service

provider. When making a call, you are

given the option of using your default

CUG, instead of selecting one from the

list.

•

Connect to voice server: connect to

the voicemail server to listen to your

messages.

Bluetooth (Menu 9.7)

Voice server number: enter the

Using the Bluetooth feature, you can

connect the phone wirelessly to other

Bluetooth devices and exchange data with

them, talk hands-free, or control the phone

remotely.

voicemail server number.

Closed user group (Menu 9.6.7)

Use this menu to set incoming and outgoing

calls to be restricted to a selected user

group. For details about how to create a

closed user group (CUG), contact your

service provider.

Bluetooth technology allows free wireless

connections between all Bluetooth-compliant

devices within a range of 10 meters. Since

the devices communicate using radio waves,

they do not need to be in line of sight to

each other.

•

Index list: add, delete, or activate CUG

index numbers.

•

Secure mode: determine if the phone

asks for your confirmation when other

devices access your data.

• If there are obstacles between the

devices, the operating distance may be

reduced.

• It is recommended that you do not use

the Bluetooth feature while using

multimedia features, such as voice

recorder, camera, and music player, or

vice versa, for better performance.

• Some devices may not be compatible

with your phone.

Bluetooth services: display available

Bluetooth services.

Searching for and pairing with a

Bluetooth device

1. From the Bluetooth menu, select My

devices

2. Select Search for new devices

Setting up the Bluetooth feature

After searching, a list of devices to which

you can connect displays. The following

icons indicate the type of device:

The Bluetooth menu provides the following

options:

•

Stereo

headset

•

PDA

•

Activation: activate or deactivate the

Bluetooth feature.

•

Mobile

phone

Unknown

device

My devices: search for connectable

Bluetooth devices.

My phone’s visibility: allow other

Bluetooth devices to search for your

phone.

•

Computer

Printer

Hands-free car kit /Mono headset

The colour of the icon indicates the

status of the the device:

•

My phone’s name: assign a Bluetooth

device name to your phone, which is

then displayed on other devices.

•

Grey for unpaired devices

Blue for paired devices

Menu functions

•

Orange for devices that are currently

connected to your phone

•

Service list: access the Bluetooth

service list of the device.

3. Select a device.

•

Rename: rename the paired device.

4. Enter a Bluetooth PIN and press <OK>.

This code is used just once and you do

not need to memorise it.

Authorise device/Unauthorised

device: determine whether or not the

phone asks you to permit connection

when other devices try to connect to

your phone.

When the owner of the other device

enters the same code, pairing is

complete.

•

Delete: remove the selected device or

all devices from the list.

Some devices, especially headsets or

hands-free car kits, may have a fixed

Bluetooth PIN, such as 0000. If the other

device has a code, you must enter it.

Sending data via Bluetooth

1. Activate the Bluetooth feature.

2. Select the application in which the item

you want to send is stored.

Using device options

3. Scroll to the item you want and press

From the device list, press <Options> to

access the following options:

Options>.

4. Select Send via

for new devices

→

Bluetooth

→

•

Connect: connect to a headset or

hands-free car kit.

The phone searches for devices within

range and displays a list of available

devices.

Disconnect: end the connection with

the connected device.

Browse files: search for data from the

device and import data directly to your

phone.

5. Select a device.

6. If necessary, enter the Bluetooth PIN

needed for pairing and press <OK>.

Receiving data via Bluetooth

Change PIN code (Menu 9.8.2)

To receive data via Bluetooth, your phone’s

Bluetooth feature must be active and its

visibility must be enabled.

Use this menu to change your PIN. The PIN

check feature must be enabled to change

the PIN.

1. If an unauthorised Bluetooth device

Phone lock (Menu 9.8.3)

sends data to your phone, press <Yes

to allow the device to access your phone.

Use this menu to lock the phone from

unauthorised use.

2. Press <Yes> to receive data.

When this feature is enabled, you must

enter a 4- to 8-digit phone password each

time the phone is switched on.

Security (Menu 9.8)

Use this menu to protect the phone against

unauthorised use by managing the several

access codes of your phone and SIM card.

The password is preset to 00000000. To

change the password, use the Change

password menu.

If you enter an incorrect PIN/PIN2 three

times, the SIM card is blocked. To

unblock it, you need to enter your PUK/

PUK2 (Personal Unblocking Key). The

codes are supplied by your service

provider.

Change password (Menu 9.8.4)

Use this menu to change your phone

password.

Privacy (Menu 9.8.5)

Use this menu to lock access to messages,

media files, all menu functions on the

phone, except for call functions.

PIN check (Menu 9.8.1)

The 4- to 8-digit PIN (Personal Identification

Number) protects your SIM card against

unauthorised use. When this feature is

enabled, the phone requires your PIN each

time it is switched on.

When a privacy option is enabled, you must

enter the phone password to access the

locked items or functions.

Menu functions

SIM lock (Menu 9.8.6)

Your phone is set by default for

connecting to the network by default. If

you change the settings without first

checking with your service provider, the

web browser, MMS, and e-mail features

may not work properly.

This menu allows your phone to work only

with the current SIM by assigning a SIM lock

code. You must enter the SIM lock code to

use a different SIM card.

Fixed dialling mode (Menu 9.8.7)

Creating a WAP profile

1. Press <New>. If a profile has already

If supported by your SIM card, Fixed Dialling

Number (FDN) mode restricts your outgoing

calls to a limited set of phone numbers.

When this feature is enabled, you can make

calls only to phone numbers stored on the

SIM card.

been saved, press <Options> and

select Add new connection

2. Select WAP settings, if applicable.

3. Specify profile parameters:

Change PIN2 code (Menu 9.8.8)

•

Profile name: enter a profile name.

Homepage URL: enter the URL

address of the page to be used as

your homepage.

If supported by your SIM card, use this

menu to change your current PIN2.

Connection settings (Menu 9.9)

•

Proxy: activate or deactivate the

proxy server.

IP address: enter the IP address of

the proxy server.

Port: enter the port number of the

proxy server.

Linger time: set a time period after

which the network is disconnected if

Use this menu to create and customise the

profiles containing the settings for

connecting your phone to the network. You

need these settings to use the web browser

or send MMS messages or e-mails.

there has been no new data traffic in

that time.

4. Press <Save> to save the profile.

Creating a streaming server profile

•

DNS: activate or deactivate the DNS

(Domain Name Server) addresses.

DNS1 and DNS2: enter the primary

and secondary DNS addresses.

Bearer: select the network bearer

type.

Advanced settings: change the

advanced options. Depending on the

bearer setting, available options vary.

Setting up a streaming server profile may

not be available depending on your service

provider.

1. Press <New>. If a profile has already

been saved, press <Options> and

select Add new connection

2. Select Streaming settings

3. Specify profile parameters:

When the bearer is set to GPRS

•

Profile name: enter a profile name.

APN: enter the access point name.

Password: enter the login

password.

APN: enter the access point name.

Password: enter the login

password.

4. Press <Save> to save the profile.

When the bearer is set to GSM

Using profile options

Dial number: enter the PPP phone

number.

Press <Options> to access the following

options:

Password: enter the login

password.

•

Edit: edit the selected profile.

Delete: delete the profile.

Data call type: select a call type for

data transmission.

Add new connection: add a new

profile.

Menu functions

Reset settings (Menu 9.10)

Use this menu to reset the phone’s settings

you have changed.

1. Press [Centre] to select the setting

categories to be reset.

2. Press <Reset>.

3. Press <OK> to confirm the reset.

4. Enter the phone password and press

OK>.

The password is preset to

00000000. You can change this

password. p. 93

ꢀ

“Enter PUK”

The PIN has been entered incorrectly

Solve problems

•

three times in succession, and the SIM

card is now blocked. Enter the PUK

supplied by your service provider.

Help and personal needs

To save the time and expense of an

unnecessary service call, perform the simple

checks in this section before contacting a

service professional.

“No service,” “Network failure,”

or “Not done” displays

•

The network connection has been lost.

You may be in a weak signal area. Move

and try again.

When you switch on your phone, the

following messages may appear:

“Insert SIM card”

•

You are trying to access an option for

which you have no subscription with your

service provider. Contact the service

provider for further details.

•

Be sure that the SIM card is correctly

installed.

“Enter password”

•

The automatic locking function has been

enabled. You must enter the phone’s

password before you can use the phone.

You have entered a number but it was

not dialled

•

Be sure that you have pressed [ ].

“Enter PIN”

Be sure that you have accessed the right

cellular network.

•

You are using your phone for the first

time. You must enter the PIN supplied

with the SIM card.

•

Be sure that you have not set an

outgoing call barring option.

•

The PIN check feature is enabled. Every

time the phone is switched on, the PIN

has to be entered. To disable this

Your correspondent cannot reach you

•

Be sure that your phone is switched on.

([ ] pressed for more than one

second.)

feature, use the PIN check menu.

Solve problems

•

Be sure that you are accessing the

correct cellular network.

•

Try moving the phone slightly or moving

closer to a window if you are in a

building.

•

Be sure that you have not set an

incoming call barring option.

No number is dialled when you re-call a

Phonebook entry

Your correspondent cannot hear you

speaking

•

Use the Contact list menu to ensure the

number has been stored correctly.

•

Be sure that you have switched on the

microphone.

•

Re-store the number, if necessary.

•

Be sure that you are holding the phone

close enough to your mouth. The

microphone is located at the bottom of

the phone.

The battery does not charge properly or

the phone sometimes turns itself off

•

Wipe the charging contacts both on the

phone and on the battery with a clean

soft cloth.

The phone starts beeping and

“Warning. Low battery” flashes on the

display

If the above guidelines do not help you

to solve the problem, take note of:

•

Your battery is insufficiently charged.

Recharge the battery.

•

The model and serial numbers of your

phone

The audio quality of the call is poor

Check the signal strength indicator on

the display ( ). The number of bars

indicates the signal strength from strong

) to weak ( ).

•

Your warranty details

•

A clear description of the problem

Then contact your local dealer or Samsung

after-sales service.

(

The exposure standard for mobile phones

employs a unit of measurement known as

Specific Absorption Rate (SAR). The SAR

limit recommended by the EU Council is

Health and safety

information

SAR certification information

2.0W/kg.

This phone meets European Union (EU)

requirements concerning exposure to radio

waves.

The highest SAR value for this model phone

was 0.355W/kg

SAR tests are conducted using standard

operating positions with the phone

Your mobile phone is a radio transmitter and

receiver. It is designed and manufactured to

not exceed the limits for exposure to radio-

frequency (RF) energy, as recommended by

the EU Council. These limits are part of

comprehensive guidelines and establish

permitted levels of RF energy for the general

population. The guidelines were developed

by independent scientific organisations

through the periodic and thorough

transmitting at its highest certified power

level in all tested frequency bands. Although

the SAR is determined at the highest

certified power level, the actual SAR level of

the phone while operating can be well below

the maximum value. This is because the

phone is designed to operate at multiple

power levels so as to use only the power

required to reach the network. In general,

the closer you are to a base station, the

lower the power output of the phone.

evaluation of scientific studies. The limits

include a substantial safety margin designed

to ensure the safety of all persons,

regardless of age and health.

* The SAR limit for mobile phones used by the public is

2.0 watts/kilogram (W/kg) averaged over ten grams of

body tissue. The limit incorporates a substantial margin

of safety to give additional protection for the public and

to account for any variations in measurements. The SAR

values may vary, depending on national reporting

requirements and the network band.

Health and safety information

Before a new model phone is available for

sale to the public, compliance with the

European R&TTE Directive must be shown.

This directive includes as one of its essential

requirements the protection of the health

and safety of the user and any other person.

•

If left unused, a fully charged battery will

discharge itself over time.

Use only Samsung-approved batteries,

and recharge your battery only with

Samsung-approved chargers. Disconnect

the charger from the power source when

it is not in use. Do not leave the battery

connected to a charger for more than a

week, since overcharging may shorten

its life.

Precautions when using batteries

•

Never use a charger or battery that is

damaged in any way.

•

Extreme temperatures will affect the

charging capacity of your battery: it may

require cooling or warming first.

Use the battery only for its intended

purpose.

If you use the phone near the network’s

base station, it uses less power. Talk and

standby time are greatly affected by the

signal strength on the cellular network

and the parameters set by the network

operator.

Do not leave the battery in hot or cold

places because the capacity and lifetime

of the battery will be reduced. Try to

keep the battery at room temperature. A

phone with a hot or cold battery may not

work temporarily, even when the battery

is fully charged. Li-ion batteries are

particularly affected by temperatures

below 0°C (32°F).

•

Battery charging time depends on the

remaining battery charge, the type of

battery, and the charger used. The

battery can be charged and discharged

hundreds of times, but it will gradually

wear out. When the operation time is

noticeably shorter than normal, it is time

to buy a new battery.

100

•

Do not short-circuit the battery.

Operating environment

Accidental short-circuiting can occur

when a metallic object like a coin, clip or

pen causes a direct connection between

the + and – terminals of the battery

(metal strips on the battery). For

example, do not carry a spare battery in

a pocket or bag where the battery may

contact metal objects. Short-circuiting

the terminals may damage the battery or

the object causing the short-circuiting.

Remember to follow any special regulations

in force in the area you are in, and always

switch off your phone whenever it is

forbidden to use it, or when it may cause

interference or danger.

When connecting the phone or any

accessory to another device, read its user’s

guide for detailed safety instructions. Do not

connect incompatible products.

As with other mobile radio transmitting

equipment, users are advised that for the

satisfactory operation of the equipment and

for the safety of personnel, it is

recommended that the equipment should

only be used in the normal operating

position (held to your ear with the antenna

pointing over your shoulder).

•

Dispose of used batteries in accordance

with local regulations. Always recycle. Do

not dispose of batteries in a fire.

Road safety

Your wireless phone gives you the powerful

ability to communicate by voice, almost

anywhere, anytime. But an important

responsibility accompanies the benefits of

wireless phones, one that every user must

uphold.

When you are driving a car, driving is your

first responsibility. When using your wireless

phone while driving, follow local regulations

in the country or region you are in.

101

Health and safety information

Other medical devices

Electronic devices

If you use any other personal medical

devices, consult the manufacturer of your

device to determine if it is adequately

shielded from external RF energy.

Most modern electronic equipment is

shielded from radio frequency (RF) signals.

However, certain electronic equipment may

not be shielded against the RF signals from

your wireless phone. Consult the

Your physician may be able to assist you in

obtaining this information.

manufacturer to discuss alternatives.

Pacemakers

Switch off your phone in health care facilities

when regulations posted in these areas

instruct you to do so.

Pacemaker manufacturers recommend that

a minimum distance of 15 cm (6 inches) be

maintained between a wireless phone and a

pacemaker to avoid potential interference

with the pacemaker. These

recommendations are consistent with the

independent research and recommendations

of Wireless Technology Research. If you

have any reason to suspect that interference

is taking place, switch off your phone

immediately.

Vehicles

RF signals may affect improperly installed or

inadequately shielded electronic systems in

motor vehicles. Check with the

manufacturer or its representative regarding

your vehicle.

You should also consult the manufacturer of

any equipment that has been added to your

vehicle.

Hearing aids

Posted facilities

Some digital wireless phones may interfere

with some hearing aids. In the event of such

interference, you may wish to consult your

hearing aid manufacturer to discuss

alternatives.

Switch off your phone in any facility where

posted notices require you to do so.

102

Potentially explosive environments

Emergency calls

Switch off your phone when in any area with

a potentially explosive atmosphere, and

obey all signs and instructions. Sparks in

such areas could cause an explosion or fire

resulting in bodily injury or even death.

This phone, like any wireless phone,

operates using radio signals, wireless, and

landline networks as well as user-

programmed functions, which cannot

guarantee connection in all conditions.

Therefore, you should never rely solely on

any wireless phone for essential

Users are advised to switch off the phone

while at a refuelling point (service station).

Users are reminded of the need to observe

restrictions on the use of radio equipment in

fuel depots (fuel storage and distribution

areas), chemical plants, or where blasting

operations are in progress.

communications like medical emergencies.

To make or receive calls, the phone must be

switched on and in a service area with

adequate signal strength. Emergency calls

may not be possible on all wireless phone

networks or when certain network services

and/or phone features are in use. Check

with local service providers.

Areas with a potentially explosive

atmosphere are often but not always clearly

marked. They include the areas below decks

on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum

gas, such as propane or butane, areas

where the air contains chemicals or

particles, such as grain, dust or metal

powders, and any other area where you

would normally be advised to turn off your

vehicle engine.

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your

present location. Emergency numbers

vary by location.

3. Press [ ].

Certain features like Call Barring may need

to be deactivated before you can make an

emergency call. Consult this document and

your local cellular service provider.

103

Health and safety information

•

Failure to observe these instructions may

lead to the suspension or denial of

telephone services to the offender, or

legal action, or both.

Other important safety information

•

Only qualified personnel should service

the phone or install the phone in a

vehicle. Faulty installation or service may

be dangerous and may invalidate any

warranty applicable to the device.

Care and maintenance

Your phone is a product of superior design

and craftsmanship and should be treated

with care. The suggestions below will help

you fulfill any warranty obligations and allow

you to enjoy this product for many years.

•

Check regularly that all wireless phone

equipment in your vehicle is mounted

and operating properly.

Do not store or carry flammable liquids,

gases, or explosive materials in the same

compartment as the phone, its parts, or

accessories.

•

Keep your phone and all its parts and

accessories out of the reach of small

children and pets. They may accidentally

damage these things or choke on small

parts.

•

For vehicles equipped with an air bag,

remember that an air bag inflates with

great force. Do not place objects,

including installed or portable wireless

equipment, in the area over the air bag

or in the air bag deployment area.

Improperly installed wireless equipment

could result in serious injury if the air

bag inflates.

•

Keep the phone dry. Precipitation,

humidity, and liquids contain minerals

that corrode electronic circuits.

Do not use the phone with a wet hand.

Doing so may cause an electric shock to

you or damage to the phone.

Do not use or store the phone in dusty,

dirty areas, as its moving parts may be

damaged.

•

Switch off your phone before boarding an

aircraft. It is dangerous and illegal to use

wireless phones in an aircraft because

they can interfere with the operation of

the aircraft.

104

•

Do not store the phone in hot areas.

High temperatures can shorten the life of

electronic devices, damage batteries,

and warp or melt certain plastics.

•

When the phone or battery gets wet, the

label indicating water damage inside the

phone changes colour. In this case,

phone repairs are no longer guaranteed

by the manufacturer's warranty, even if

the warranty for your phone has not

expired.

Do not store the phone in cold areas.

When the phone warms up to its normal

operating temperature, moisture can

form inside the phone, which may

damage the phone’s electronic circuit

boards.

•

If your phone has a flash or light, do not

use it too close to the eyes of people or

animals. This may cause damage to their

eyes.

•

Do not drop, knock, or shake the phone.

Rough handling can break internal circuit

boards.

Use only the supplied or an approved

replacement antenna. Unauthorised

antennas or modified accessories may

damage the phone and violate

Do not use harsh chemicals, cleaning

solvents, or strong detergents to clean

the phone. Wipe it with a soft cloth

slightly dampened in a mild soap-and-

water solution.

regulations governing radio devices.

•

If the phone, battery, charger, or any

accessory is not working properly, take it

to your nearest qualified service facility.

The personnel there will assist you, and

if necessary, arrange for service.

•

Do not paint the phone. Paint can clog

the device’s moving parts and prevent

proper operation.

Do not put the phone in or on heating

devices, such as a microwave oven,

stove, or radiator. The phone may

explode when overheated.

105

Index

Call log

dialled • 34

missed • 34

received • 34

Call time • 34

Caller groups • 37

AB mode, text input • 27

Alarm • 46

Date, set • 83

Deleting

Answering

call log • 33

e-mail • 60

events • 76

MMS • 58 60

phonebook • 36

SMS • 57 60 62

Dialled calls • 34

call • 30

second call • 31

Anykey answer • 85

Auto redial • 85

Caller ID • 86

Calls

answering • 30

barring • 88

diverting • 88

holding • 31

redialling • 30

rejecting • 30

waiting • 89

Background image • 85

Backlight, set

display • 87

Dialling font, set • 86

Display

brightness • 86

icons • 11

language • 83

layout • 11

keypad • 88

Barring, calls • 88

Battery

Camera

charging • 7

photos • 77

videos • 80

settings • 85

low indicator • 8

precautions • 100

Bluetooth

Diverting, calls • 88

Document files • 72

DRM (DigitalRights Management)

• 68

DTMF tones, send • 32

CB (Cell Broadcast) messages

• 58 68

receiving, data • 93

sending, data • 92

settings • 91

Characters, enter • 27

Configuration messages • 57

Connection tone • 87

Convertor • 47

Creating messages

e-mail • 55

MMS • 54

SMS • 52

CUG (Closed User Group) • 90

Broadcast messages • 58

Browser, web • 49

E-mails

creating/sending • 55

deleting • 60

setting • 64

viewing • 60

Emergency calls • 103

Calculator • 47

Calendar • 74

Call cost • 35

106

Light se ttin gs • 87

Locking

M usic pl ay er • 39

Music, downloaded • 71

My menu • 14

FDN (Fixed Dialling Number)

mode • 94

menu functions • 93

phone • 93

SIM card • 94

File manager • 68

File viewer • 72

Name card • 38

Names

Low battery indicator • 8

entering • 27

searching • 35

Network selection • 89

Network services • 88

Games • 45

Memory card

Greeting message • 84

installing • 24

Memory status

downloaded items • 74

file manager • 74

messages • 68

phonebook 39

Menu style • 86

Message tone • 86

Messages

Health and safety • 99

Holding, call • 31

Outbox, messages • 59

Icons, description • 11

Image editor • 43

Images, downloaded • 69

Inbox, messages

e-mail • 60

Password

call barring • 89

phone • 93

Phone

cell broadcast • 58

configuration • 58

care and maintenance

• 104

display • 11

icons • 11

MMS/SMS • 56

International calls • 29

Internet • 49

e-mail • 55

greeting • 84

MMS • 54

push • 58

SMS • 52

locking • 93

password • 93

resetting • 96

switching on/off • 8

unpacking • 6

Phonebook

adding • 36

Java applications • 45

Minute minder • 87

Missed calls • 34

MMS messages

Keypad tones

selecting • 86

sending/muting • 32

creating/sending • 54

deleting • 58

setting • 63

viewing • 56

deleting • 36

finding • 35

Language, select • 83

Last number, redial • 30

Multiparty-call • 33

107

Index

managing • 39

options • 36

Road sa fety • 101

Roaming • 89

T9 mode, text input • 28

Templates, message • 61

Text, enter • 27

Time, set • 83

Timer • 48

speed dialling • 38

Photos

Safety

taking • 77

viewing • 69

PIN, change • 93

PIN2, change • 94

Power on/off tone • 87

Privacy • 93

information • 99

precautions • 1

Security, calls • 93

Sent messages • 59

Shortcut • 84

TV out

setting • 86

viewing on TV screen • 26

SIM card

Videos

Problems, solve • 97

inserting • 7

locking • 94

Push messages • 58 67

playing • 70

recording • 80

Voice recorder

playing • 42

recording • 42

Voicemail server • 90

Skin colour • 86

Slide tone • 87

SMS messages

Quiet mode

setting • 87

switching • 15

creating/sending • 52

deleting • 57

setting • 62

viewing • 56

Received calls • 34

Received messages

e-mail • 60

MMS/SMS • 56

Recording

videos • 80

voice memos • 42

Redialling

Waiting call • 89

Wallpaper • 85

Web browser

access • 49

Sound settings • 86

Sounds, downloaded • 71

Speakerphone • 32

Speed dial • 38

Stopwatch • 48

Switching on/off

phone • 8

bookmarks • 51

World time • 46

automatically • 85

manually • 30

Resetting phone • 96

Ringer

incoming calls • 86

messages • 86

108

Toshiba 18 INCH HARD DISK DRIVE HDD1544 User Manual
Sun Microsystems STOREDGE A5000 User Manual
Sony USM512H User Manual
Sonic Alert Clock Radio DM10 User Manual
SciPhone + I68 User Manual
Sanyo Cell Phone 6600 User Manual
Rotel RCD 990 User Manual
Pioneer DRM 1004 User Manual
Parrot Cell Phone 3200 User Manual
Panasonic RC6088 User Manual