Philips CDR 775 User Manual

xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 1  
Audio CD Recorder  
Audio  
CDR-775  
CDR-776  
CDR-777  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 3  
Index  
__________________________________________________________________________  
English  
4
31  
58  
85  
________________________________________________________________________  
Français  
Español  
________________________________________________________________________  
________________________________________________________________________  
____________________________________________________________________  
Deutsch  
Nederlands  
112  
139  
________________________________________________________________________  
Italiano  
3
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 4  
Table of contents  
General information  
Finalizing  
Welcome......................................................................................................5  
Environmental information................................................................5  
About this manual...................................................................................5  
Technical data............................................................................................5  
Discs for recording.................................................................................6  
Discs for playback....................................................................................6  
Maintenance...............................................................................................6  
Accessories ................................................................................................6  
Finalizing CDR & CDRW discs.....................................................22  
Unfinalizing CDRW discs.................................................................22  
Erasing  
Erasing CDRW discs content........................................................23  
Playing  
Playing CD’s (Changer mode) ......................................................24  
Playing CDs on Deck 1 and Deck 2 simultaneously  
(DJ mode).................................................................................................24  
Selecting a track ....................................................................................24  
Search..........................................................................................................25  
Shuffle (random order) play..........................................................25  
Repeat CD, track or program.......................................................25  
Programming tracks............................................................................25  
Operating buttons  
Controls........................................................................................................7  
Display  
DISPLAY indications ..............................................................................8  
DISPLAY messages.................................................................................9  
MENU messages...................................................................................10  
Menu mode  
Connections  
Remarks about Menu mode..........................................................26  
General operation of Menu...........................................................26  
A.Text input.............................................................................................27  
B. Erasing text.........................................................................................27  
C. Reviewing CD text in memory..............................................28  
D.Auto track increment...................................................................28  
E. Balance...................................................................................................29  
Which connections do you need?..............................................11  
Explanation of connections.............................................................11  
How to connect your recorder  
Analog connections.............................................................................12  
Digital connections..............................................................................12  
Power supply/Mains.............................................................................13  
Fixing problems...............................................................30  
Remote control  
Inserting batteries in the remote control...............................14  
Remote control commands...........................................................14  
Recording general  
Insering discs............................................................................................15  
Introduction.............................................................................................16  
General information on recording .............................................16  
How to record from the internal  
deck  
Recording an entire CD...................................................................17  
Recording a single track....................................................................18  
Adjusting recording level  
Recording from internal deck........................................................19  
Recording from external source..................................................19  
How to record from an external  
source  
Recording from LP’s or cassettes................................................20  
Autostart recording............................................................................21  
4
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 5  
General information  
Welcome !  
About this manual  
Thank you for buying this Philips Compact Disc Recorder.  
This manual gives instructions for operating this CD  
recorder.  
In the 1980s Philips invented a new audio system - the CD.  
The CD (compact disc) revealed the new dimensions of  
digital sound and added to the pleasure of audio.  
Please note:  
- the digits (1) throughout the text indicate a sequence of  
Compact-disc technology permits a high contrast in both  
loud and soft passages, with perfect channel separation.  
actions necessary to perform a certain operation;  
- the arrows () indicate the reaction from the recorder;  
Philips has now further developed compact disc technology  
and the result is the CD recorder.  
- the dots (0) indicate remarks, advice or special options  
within a sequence of actions.The dot-marked instructions  
are not necessary for operation.  
With your Philips CD Recordable/ReWritable Recorder,  
you can record, play and erase your own high-quality audio  
CDs, subject to legal restrictions on copying. Naturally, you  
will also be able to play all pre-recorded audio CDs.  
All instructions in this manual are based on control via the  
keys on the CD recorder. If there are corresponding keys  
available on the remote control they can be used as well.  
Environmental information  
Technical data  
All redundant packing material has been omitted.We have  
done our utmost to make the packaging easily separable  
into three mono materials: cardboard (box), polystrene  
foam (buffer) and polyethylene (bags, protective foam  
sheet).  
Subject to modification without notice.  
General  
Power consumption.....................................................................20 W  
Power consumption in Standby...............................................6 W  
Operating temperature........................................................5-35 °C  
Weight.................................................................................................4.5 kg  
Dimensions .......................................................435 x 310 x 88 mm  
Your CD recorder consists of materials which can be  
recycled if disassembled by a specialized company. Please  
observe the local regulations regarding the disposal of  
packing materials, exhausted batteries and old equipment.  
Audio  
Frequency response.................................................2Hz-22050 Hz  
Playback S/N (A-weighted)..................................................100 dB  
Playback S/N................................................................................ 100 dB  
Playback dynamic range CDR.............................95 dB (90 dB)  
Playback dynamic range CD...................................................90 dB  
Playback total harmonic  
CAUTION  
Use of controls or adjustments or performance of  
procedures other than herein may result in hazardous  
radiation exposure or other unsafe operation.  
distortion CDR...................................................88 dB = 0.0033 %  
Playback total harmonic  
distortion CD......................................................85 dB = 0.0056 %  
Channel separation...................................................................100 dB  
Recording S/N (A-weighted).................................................98 dB  
Recording S/N digital without SRC...............equal to source  
Recording dynamic range.........................................................92 dB  
Recording total harmonic  
distortion + noise................................................85 dB (0.0056%)  
Laser  
Type....................................................Semiconductor laser GaAlAs  
Wave length..............................................775-795 nm (at 25 °C)  
Output power....................2.5 mW (Read,) 35 mW (Write)  
Beam divergence................................................................60 degrees  
The type plate is located at the back of the set.  
CAUTION  
INVISIBLE RADIATION WHEN OPEN.  
AVOID EXPOSURETO BEAM.  
This product complies with the radio interference  
requirements of the European Union.  
Note:This warning is located inside the enclosure.  
5
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 6  
General information  
Discs for recording  
Maintenance  
For recording, make sure to use special audio discs only.  
These discs are marked with “Digital Audio” and the logos  
shown below.  
For recording, it is very important to use discs that are free  
of dust and scratches.  
To clean a CD, wipe it in a straight  
line from the center towards the  
edge using a soft, lint-free cloth.  
A cleaning agent may damage the  
disc! Write only on the printed  
side of a CDR or CDRW, and only  
with a soft felt-tipped pen.  
There are two different types of audio discs for the use on  
this CD recorder:  
– CD-Audio Recordable  
(CDR) discs  
These discs can be recorded on  
Recordable  
once and play in all standard CD  
players and CD recorders, when they are finalized.  
Clean the CD recorder with  
a soft, slightly dampened lint-free  
cloth. Do not use any cleaning  
agents as they may have a  
corrosive effect.  
– CD-Audio ReWritable  
(CDRW) discs  
These discs can be recorded on,  
erased and re-recorded many  
ReWritable  
times and play in CDRW compatible CD players  
and CD recorders, when they are finalized.  
Do not expose the CD recorder,  
batteries or CDs to humidity, rain,  
sand or excessive heat (caused by  
– All Philips CD players and CD  
recorders with the sticker  
OPEN  
/
CLOSE  
P
L
A
Y
/
P
A
U
S
E
STOP  
AUDIO CD RECORDABLE/REW  
RITABLE  
shown here are CDRW compatible.  
heating equipment or direct  
sunlight).  
To ensure proper working of the CD recorder we  
recommend the use of Philips audio CDR and audio  
CDRW discs only.  
Always keep the tray closed to avoid dust on the lens.  
The lens may cloud over when the CD recorder is  
suddenly moved from cold to warm surroundings, making it  
impossible to play a CD. Leave the CD recorder in the  
warm environment until the moisture evaporates.  
Note: Do not use a computer CDR or CDRW as recording will  
not work!  
Recording is permissible insofar as copyright or other  
rights of third parties are not infringed upon.  
In certain countries including the UK and certain  
Commonwealth countries, use of the product as  
shown or suggested in this user manual may require  
the permission of copyright holders.  
Accessories  
- 2 Analog audio cables (with red and white plugs)  
- Power cord  
- 2 Batteries  
Discs for playback  
- Remote control  
Your CD recorder is able to play:  
- Guarantee  
- All pre-recorded audio CDs.  
- All Audio CDR and Audio CDRW.  
Note: CDR(W) discs containing audio recorded with a  
computer can only be played when they are correctly treated  
according the audio standard (IEC958: Consumer part). Single  
session only!  
6
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 7  
Operating buttons  
4
5
6
7
8
9
10 11 12  
13  
14 15 16 17 18 19 20 21 22  
OPEENN  
/
CLOSE  
REC  
PLAY  
/
P
AUSE  
STOP  
RECORD  
EXT  
TYPE  
FINALIZE  
ERASE  
SOURCE  
EASY JOG  
CDR  
STORE/  
MENU  
CANCEL/  
DELETE  
CD  
REM  
REC  
TIME  
TRACK  
TOTAL  
REM  
TRACK  
TIME  
STEP  
+
3
1
2
3
4
5
6
7
8
9
10 11  
12 13  
14 15  
ENTER  
16 17  
18 19  
20  
SYNC  
MANU  
AL  
RECORDER  
RECO  
RD  
AUD  
DIG  
PROG  
SHU  
IO CD  
Recordable  
ITAL  
I
I
RECO  
A-B  
ALL  
RDA  
CD  
BLE/REW  
RITA  
CHA  
NGER  
BLE  
OPTIC  
C
D
AL  
FFLE  
RW  
ANALO  
G
RE  
PEAT  
RW  
SCAN  
TRACK  
PLAYER  
2
1
23  
24  
CDR  
77X  
AUD  
AUDIO CD PLA  
IO  
IO  
C
C
D
D
RE  
PL  
AYBA  
CK  
COR  
DER  
ON  
/
O
FF  
PROG  
SHUFFLE  
PHON  
ES  
DISPLA  
Y
SCROLL  
R
EPEA  
T
DJ  
M
ODE  
DOU  
BLE SPEED  
IR SENSOR  
31 30 29 28 27 26 25  
General  
Controls  
CD recorder  
#
Display; information screen  
% Q - searches backward  
- cursor control in Menu/Prog. review mode  
^ R - searches forward  
- cursor control in Menu/Prog. review mode  
& ¡EASY JOG (rotate)  
1
ON/OFF  
turns the CD recorder ON or OFF (if the recorder is in Standby  
mode, any key press will activate the CD recorder)  
2
3
4
Standby indicator  
CD Recorder disc tray  
- previous/next track (Play and Program mode)  
- recording level control (recording)  
- selects settings (menu on)  
OPEN/CLOSE /  
opens/closes disc tray  
5
6
7
8
9
0
!
@
PLAY/PAUSE 2;  
starts play/interrupts play or recording  
ENTER (push)  
- plays selected tracks  
- selects settings in Menu mode  
- programs track numbers  
- starts unfinalizing  
STOP 9  
stops/clears a program  
REC(ord) TYPE  
selects recording modes  
*
(
STORE/MENU  
- stores Menu settings  
- enters Menu mode  
RECORD  
starts recording, finalizing, erasing  
CANCEL/DELETE  
FINALIZE  
selects finalize mode  
- deletes tracks from a program  
- deletes text in Menu mode  
- returns to a higher level in the menu  
ERASE  
selects erasing mode (disc or track)  
§
ª
º
IR sensor  
receives signals from the remote control  
SOURCE  
selects external input source (e.g.Analog input, Digital input)  
PHONES  
socket for headphones  
CDR  
selects CD recorder deck display/keys  
DJ MODE  
separate play of CD recorder deck and CD player deck  
CD player  
REPEAT  
repeats play (All, program or track)  
$
)
¡
£
CD  
selects CD player deck display/keys  
SCROLL  
PLAY/PAUSE 2;  
starts play/interrupts play  
activates scrolling of text over the display (once)  
DISPLAY  
STOP 9  
stops/clears a program  
selects display information, permanent text scrolling and time  
SHUFFLE  
plays CD(RW) or program in random order  
OPEN/CLOSE /  
opens/closes disc tray  
PROG(ram)  
opens/closes program memory  
CD Player disc tray  
Note: Unless stated otherwise, all controls are on the front of the CD  
recorder.When provided on the remote control, you can also use the  
corresponding buttons, after selecting the CD recorder deck or CDplayer  
deck by pressing CDR or CD.  
7
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 8  
Display  
* iCHANGERh  
DISPLAY indications  
changer mode selected  
1
2
3
4
5
6
( ;  
pause function active  
REM  
REC TIME TRACK  
TOTAL REM TRACK TIME  
STEP  
) B  
7
8
27  
26  
25  
24  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20  
+
lights during play  
SYNC MANUAL  
RECORD  
PROG  
9
SHUFFLE ALL  
REPEAT  
SCAN TRACK  
CHANGER  
CD  
CD  
DIGITAL  
OPTICAL  
ANALOG  
I
I
¡ R(W)  
10  
RW  
RW  
unfinalized CDR(W) disc inserted  
23 22 21 20 19 18 17 16  
15 14 13 12 11  
0  
lights during recording  
1 REM/RECTIME  
remaining time/remaining recording time/recording time  
£ ANALOG  
- analog input selected for external recording  
- analog recording in case a disc is copy protected  
2 TRACK  
track number  
OPTICAL I  
optical input I selected for external recording  
3 FE  
balance (lights during balance adjustment)  
DIGITAL I  
digital input I selected for external recording  
4 TOTAL REMTRACKTIME  
total or remaining time of disc or track  
§ SYNC  
automatic or synchronised start of external recording  
5 }  
remote control active  
MANUAL  
track increments can be added manually during manual  
recording from external analog source (AUTO TRACK set  
to OFF)  
6 STEP  
indicates the number of tracks in a program  
7 Track bar  
indicates:  
- tracks on a disc or in a program  
- track in play  
8 + 20  
disc or program contains more than 20 tracks  
9 PROG(ram)  
flashes during programming/lights in program mode  
0 REPEATTRACK/ALL  
lights up when a track/ complete disc (or program) is  
repeated  
! SCAN  
lights up when the first 10 seconds of each track are played  
@ SHUFFLE  
plays tracks in random order  
# s  
CD player deck selected  
$ c  
CD inserted (a pre-recorded CD or finalized CDR or  
CDRW disc)  
% fRECORDg  
lights during recording from the internal CD  
^ L/R ; ;  
(record/play) level bar. Indicates the audio signal level  
& j k  
DJ mode selected  
8
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 9  
Display  
MAKE CD  
DISPLAY messages  
high speed recording of a complete disc and Auto Finalize  
function selected  
Messages, as listed and explained here, may appear on the  
display for your guidance.  
REC EXT DISC  
General  
synchronised start of recording from external source  
selected  
READING  
reading disc information  
REC EXT MAN  
manual start of recording from external source selected  
OPEN  
during tray opening  
_XX DB  
level is being adjusted  
CLOSE  
during tray closing  
DOES NOT FIT  
time left on CDR(W) disc is not enough for proposed  
recording  
NO DISC  
no disc inserted, disc unreadable or disc inserted upside  
down  
ANALOG REC  
copy prohibited track found during recording.Track will be  
copied analog (Copy Protection Regulations)  
PROG FULL  
program full  
ERASE TRACK  
INSERT DISC  
when erasing one or more tracks  
insert disc or insert disc correctly  
ERASE DISC  
WRONG DISC  
when erasing a disc  
inserted disc is not an audio CD  
FINALIZE CD  
UNFINALIZED  
when finalizing a disc  
unfinalized CDR(W) disc  
FINALIZED  
MEMORY XXù  
when trying to finalize an already finalized disc  
indicates the amount of text memory used for unfinalized  
discs  
CHECK INPUT  
when RECORD is pressed while no digital source is  
detected  
Recording  
WAIT  
XX XX ERASE  
- when STOP 9is pressed during recording  
- when STOP 9is pressed during recording the first  
4 seconds of a track  
time countdown when erasing a track or a disc  
XX XX FINAL  
time countdown when finalizing a disc  
UPDATE  
PRESS RECORD  
updating disc contents  
to start manual recording, finalizing or erasing  
DISC FULL  
START SOURCE  
no more recording possible  
to start synchronised recording from a source (e.g. CD  
player)  
DIGITAL 1  
digital coaxial input 1 selected  
FINALIZED CD  
OPTICAL  
when trying to record on a finalized CDR or a prerecorded  
CD  
digital optical input selected  
ANALOG  
UNFINALIZE/PRESS ENTER  
analog input selected  
when trying to record on a finalized CDRW  
COPY PROTECT  
PROF SOURCE  
no digital recording can be made of the external source  
when a professional source is connected  
NOTFINALIZED  
REC TEXT  
when opening the tray with an unfinalized disc inserted  
(CD recorder)  
when reading CD text from source disc for recording  
TEXT PROTECT  
RECORD FAST  
when CD text of source disc is subjected to copy  
protection (CD text will not be recorded)  
high speed recording selected  
REC LISTEN  
listen speed recording selected  
9
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 10  
Display  
Play  
MENU messages -  
CHANGER MODE  
See Menu mode  
CD changer-mode selected  
DJ-MODE  
REM  
REC TIME TRACK  
TOTAL REM TRACK TIME  
STEP  
DJ- mode selected when recording keys are pressed in DJ-  
mode  
EASY JOG  
STORE/  
MENU  
CANCEL/  
DELETE  
SYNC MANUAL  
RECORD  
PROG  
ENT  
ER  
SHUFFLE ALL  
REPEAT  
SCAN TRACK  
CD  
CHANGER  
CD  
RW  
PROGRAM  
DIGITAL  
OPTICAL  
ANALOG  
I
I
RW  
program mode selected  
ALBUM TITLE  
will be followed by album title  
Menu messages  
NO TRACKS  
when attempting to edit text for a disc which has no tracks  
TEXT EDIT  
TRACK TITLE  
will be followed by track title  
ALBUM ARTIST  
will be followed by artist name  
when enteringText Edit mode  
TRACK ARTIST  
ALBUM ARTIST  
will be followed by track artist name  
when editing or erasing an artist name  
Others  
ALBUM TITLE  
when editing or erasing a title  
NO AUDIO TR  
when the recorder enters a data track during recording  
ARTIST TR N  
when editing or erasing an artist name per track  
FINALIZE CD  
laser power calibration performed 96 times, finalize disc  
needed  
TITLE TR N  
when editing or erasing a title per track  
INITIALIZING  
TEXT ERASE  
during laser power calibration for unfinalized discs  
when enteringText Erase mode  
DISC RECOVER  
ALL TEXT  
during disc recovering after power failure  
when entering AllText mode  
OPC ERROR  
ERASE OK  
OPC failure during OPC procedure (OPC = Optimum  
Power Calibration)  
when confirmation for erasing has to be given with ENTER  
key  
RECORD ERROR  
ERASE ALL OK  
recording error in menu mode  
when confirmation for erasing has to be given with ENTER  
key  
DISC ERROR  
when trying to record on or finalize a recovered disc  
ERASE MEMORY  
when waiting for confirmation when erasing a disc  
MEMORY FULL/FINALIZE CD  
when text memory is full.To add a CD to the list, first  
finalize or erase another disc from the list  
MEMORY VIEW  
when selecting text review per unfinalized disc in memory  
NOT POSSIBLE  
MEMORY EMPTY  
when trying to erase a CDR  
when REVIEW is selected while no text is in memory  
AUTO TRACK  
when selecting auto track increment ON or OFF  
ON  
auto track increment on  
OFF  
auto track increment off  
SET BALANCE  
when selecting BALANCE  
NO TEXT  
no text stored for disc  
10  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 11  
Connections  
CD  
CDR  
CD  
CDR  
CDR  
CD  
CDR  
CDR  
L
L
L
R
AN  
R
R
OU  
T
OU  
T
IN  
OU  
T
AL  
OG  
DIG  
IT  
IN  
AL  
OU  
T
IN  
IC  
AN  
AL  
OG  
DIG  
IT  
AL  
O
PT  
AL  
1
2
3
4
5
6
7
8
Which connections do you need?  
Explanation of connections  
For playback on the CD recorder  
1 Connection to mains  
(and/or CD player deck) the following outputs are present:  
2 ANALOG OUT CD  
- Digital coaxial output (CD & CDR - DIGITAL OUT) 7;  
- Analog output (CD & CDR - ANALOG OUT) 5.  
connects to the line (analog) input of an amplifier/receiver,  
so you can listen to playback of the CD player deck via the  
amplifier/receiver (only needed for separate playback of  
CD player deck in DJ mode)  
We advise you to connect these to theTAPE or CDR input  
on your amplifier.  
3 DIGITAL OUT CD  
For recording from internal player deck no  
connects to the digital coaxial input of an amplifier/receiver,  
so you can listen to playback of the CD player deck via the  
amplifier/receiver (only needed for separate playback of  
CD player deck in DJ mode)  
connections are needed.  
For external recording the following inputs are present:  
- Digital optical input (CDR - OPTICAL IN) 8;  
- Digital coaxial input (CDR - DIGITAL IN) 6;  
- Analog input (CDR - ANALOG IN) 4.  
4 ANALOG IN CDR  
Note: It is not possible to connect a record player directly to the  
CD recorder. Recordings can only be made from a record  
player connected via amplifier or receiver.  
For playback of CD player deck separately  
(DJ mode) from the CD recorder the following outputs are  
present:  
connects to the line (analog) output of an amplifier/receiver  
or other analog source (tape deck, tuner etc.), so you can  
record from this source (ANALOG). For recording from a  
record player both recorder and record player should be  
connected to an amplifier/receiver  
- Digital coaxial output (CD) 3;  
- Analog output (CD) 2.  
The connections you make will depend upon the  
possibilities your audio equipment offers. Please refer to the  
user manuals for your other audio equipment first.  
5 ANALOG OUT CD & CDR  
connects to the line (analog) input of an amplifier/receiver,  
so you can listen to playback of this CD recorder via the  
amplifier/receiver  
Digital recordings (optical or coaxial) give the best  
performance in audio and usability (e.g. auto-track increment).  
The digital optical connection is less sensitive to external  
disturbances.  
6 DIGITAL IN CDR  
connects to the digital coaxial output of an external digital  
source (CD player, DVD, DAT, etc.), so you can record from  
this source (DIGITAL1)  
We advise you to always establish both digital and analog  
connections.This will mean that analog recordings can  
always be made when digital recording is not possible.  
7 DIGITAL OUT CD & CDR  
We have described the most common ways of connecting  
the CD recorder. If you still have difficulties with the  
connections, please contact the Philips Consumer Service  
desk in your area.  
connects to the digital coaxial input of an amplifier/receiver,  
so you can listen to playback of the CDR or CD deck via  
the amplifier/receiver  
8 OPTICAL IN CDR  
connects to the digital optical output of an external digital  
source (CD player, DVD, DAT, etc.), so you can record from  
this source (OPTICAL)  
11  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 12  
How to connect your recorder  
Tip:  
Analog connection CD player deck (DJ-mode)  
This connection is only required if you want to playback on the  
CD player deck seperately from the CD recorder deck..  
This will be the case in DJ-mode.  
If the integrated CD player deck will be the only  
source from which you are going to record, just  
connect the analog output for playback of the CD  
recorder to your amplier/receiver (cable 1).  
Analog connections  
DIGITAL  
RECEIVER  
These connections are required for playback on the CD  
recorder deck as well as the CD player deck (cable 1). Cable 2  
is required for making recordings from an external analogue  
source (e.g. via amplifier: cassettedeck or turntable).  
CD RECORDER  
1
CD  
CDR  
CD  
CDR  
CDR  
CDR  
CD  
CDR  
L
L
L
R
R
OU  
T
OU  
T
IN  
AN  
OU  
T
IN  
DIG  
OU  
AN  
T
ALO  
IN  
TIC  
G
D
IGI  
TAL  
ALO  
G
OP  
AL  
ITA  
L
RECORD PLAYER  
1 For separate playback on the CD player deck, connect a  
third cable 3 (not supplied) between the ANALOG OUT  
sockets of the CD recorder and the input sockets of an  
amplifier e.g. CD, or AUX.  
CD PLAYER  
3
3
Insert the red plugs into the R sockets, and the white plugs  
into the L sockets.  
AMPLIFIER/  
RECEIVER  
Notes:  
Never use the PHONO input.  
Your CD recorder/player is equipped with a digital coaxial  
output for the CD player deck.This output can be used for  
digital playback.  
2
1
CDR  
CD RECORDER  
CD  
CDR  
CD  
CDR  
CDR  
CDR  
CD  
L
L
L
R
AN  
R
R
OU  
T
OU  
T
IN  
AN  
OU  
T
IN  
OU  
T
ALO  
IN  
TIC  
G
D
IGIT  
AL  
ALO  
G
OP  
DIG  
ITA  
AL  
L
Digital connections  
Digital coaxial connection  
This connection is only required for direct recording from an  
external digital coaxial source (e.g a CD player, DVD, DAT).  
1 Connect supplied audio cable between the ANALOG  
OUT-sockets on the CD recorder and the ANALOG input  
sockets of the amplifier/receiver (TAPE, CD-R,AUX or  
PLAY IN, LINE IN).  
Insert the red plugs into the R sockets, and the white plugs  
into the L sockets.  
CD PLAYER  
2 Connect supplied audio cable between the ANALOG IN-  
sockets on the CD recorder and the analog outputs of the  
amplifier/receiver (CDR OUT,TAPE OUT,AUX OUT, REC  
OUT, LINE OUT etc.).  
CD RECORDER  
1
CD  
CDR  
CD  
CDR  
CDR  
CDR  
CD  
CDR  
Insert the red plugs into the R sockets, and the white plugs  
into the L sockets.  
L
L
L
R
AN  
R
R
OU  
T
OU  
T
IN  
OU  
T
IN  
OU  
T
ALO  
IN  
G
D
IGI  
TAL  
AN  
ALO  
G
OP  
TIC  
DIG  
AL  
ITA  
L
3 Connect all other components of your system (tape deck,  
CD player, tuner, record player etc.) via their ANALOG  
OUT-sockets to the appropriate analog input sockets of  
the amplifier/receiver (CD IN,TUNER IN,AUX IN,  
PHONO IN etc.).  
1 Connect a digital coaxial cable between the DIGITAL IN-  
socket on the CD recorder and the DIGITAL OUT socket  
of the digital source.  
Any analog device, connected to the amplifier/receiver  
can now be used as recording source (ANALOG).  
Recording can now be done via the digital coaxial input  
(DIGITAL1).  
12  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 13  
How to connect your recorder  
Digital optical connection  
Power supply/Mains  
Instead of the digital coaxial connection you can make use of  
the optical input.. Optical connections are less sensitive to  
external disturbances.This connection is required for direct  
recording from an external digital optical source (e.g. a CD  
player, DVD, DAT).  
CD PLAYER  
1 Check whether the mains voltage as shown on the type  
plate corresponds to your local mains voltage. If it does not,  
consult your dealer or service organisation.  
CD RECORDER  
2
CD  
CDR  
CD  
CDR  
CDR  
CDR  
CD  
CDR  
L
L
L
2 Make sure all connections have been made before  
R
AN  
R
R
OU  
T
OU  
T
IN  
OU  
switching on the mains supply.  
T
IN  
OU  
T
ALO  
IN  
TIC  
G
D
IGI  
TAL  
AN  
ALO  
G
OP  
DIG  
AL  
ITA  
L
3 Plug the power cord supplied into the AC MAINS ~  
connector and the CD recorder, then into the wall socket.  
1 Remove the dust caps from the digital optical connections  
of both source and CD recorder. Keep the caps in a safe  
place.  
4 Press ON/OFF.  
The CD recorder will switch on.This may take a few  
seconds.  
2 Connect an optical fibre-optic cable  
between the OPTICAL IN socket of  
the CD recorder and the OPTICAL  
OUT socket of the source.  
Notes:  
If the CD recorder is in Standby mode (red LED on), press  
any key to activate the recorder.  
When the CD recorder is in the “OFF” position, it is still  
consuming some power. If you wish to disconnect your CD  
recorder completely from the mains, withdraw the plug from  
the AC Outlet.  
Make sure you insert both plugs  
fully, until a click is heard.  
Recording can now be done via the digital optical input  
(OPTICAL).  
Digital coaxial connections via a digital receiver  
If you have a receiver with digital coaxial in- and outputs, these  
connections allow you to make digital recordings from various  
sources, connected to the receiver.  
DIGITAL  
RECEIVER  
CD RECORDER  
1
CDR  
1
CDR  
CD  
CDR  
CD  
CDR  
CDR  
CD  
L
L
L
R
AN  
R
R
OU  
T
OU  
T
IN  
AN  
OU  
T
IN  
DIG  
OU  
T
ALO  
IN  
OP  
TIC  
G
D
IGI  
TAL  
ALO  
G
AL  
ITA  
L
1 Connect a digital coaxial cable between the DIGITAL IN-  
and OUT sockets on the CD recorder and e.g. the (digital)  
AUX in- and output sockets on the digital receiver.  
Any digital device, connected to the digital input sockets  
of the digital receiver (e.g. CD and DVD) can now be  
used as recording source.  
Note:Your CD recorder is equipped with a digital coaxial  
output (common output for CD recorder & CD player deck).  
This output can be used for digital playback.  
13  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 14  
Remote control  
SHUFFLE  
plays CD(RW) or program in random order  
Inserting batteries in the remote  
control  
REPEAT  
repeat play  
Number/alphabet keys 0 - 9  
- selects a track by number  
- selects character for text input  
TRACK INCR(ement)  
increases track numbers during recording  
SCROLL  
activates scrolling of text over the display  
CDR  
selects CD recorder deck  
CD  
1 Open the battery compartment cover.  
2 Insert 2 batteries (AA, LR6 or UM-3; as supplied) as shown.  
3 Replace the cover.  
selects CD player deck  
2
starts CD(RW) play  
Note:We recommend you use 2 batteries of the same type  
and condition.  
O
previous track (Play and Program mode)  
- cursor control in Menu/Prog. review mode  
Batteries contain chemical substances, so they should  
be disposed of properly.  
P
next track (Play and Program mode)  
- cursor control in Menu/Prog. review mode  
Remote control commands  
9
stops CD(RW) and clears a program  
Q
- searches backward  
- cursor control in Menu/Prog. review mode  
SCAN  
ABC  
SHUFFLE  
DEF  
REPEAT  
GHI  
1
JKL  
3
OPQ  
2
MN  
R
- searches forward  
4
RST  
5
UVW  
6
XYZ  
- cursor control in Menu/Prog. review mode  
8
SPACE  
9
SCROLL  
7
TRACK INCR.  
0
;
interrupts CD(RW) play/recording  
CDR  
CD  
2
MENU/STORE  
J
K
- enters Menu mode  
- stores Menu settings  
9
;
5
6
MENU/  
STORE  
PROG.  
PROG(ram)  
ENTER CANCEL  
opens/closes program memory  
ENTER  
- selects settings in Menu mode  
- programs track numbers  
- starts playback of selected track  
CANCEL  
- deletes tracks from a program  
- deletes text in Menu mode  
- returns to a higher level in the menu  
Note: First select the deck you want to control by pressing the  
selection button CDR or CD.  
STANDBY B  
switches to Standby/On/Off  
SCAN  
plays the first 10 seconds of each track  
14  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 15  
Recording general  
Inserting discs  
C
D
R
6
0
0
OPEN  
A
U
D
IO  
/CLOSE  
C
D
R
EC  
O
R
D
PL  
A
Y
ER  
/P  
A
U
S
E
S
TO  
P
RECORDING  
TYPE  
FI  
N
A
LI  
ZE  
RECORD  
ER  
A
S
E
S
O
U
R
C
E
D
IS  
PL  
A
Y
REC  
POWER  
1
2
3
4
ST  
ANDBY  
MA  
NUA  
L
DIGITAL  
I
A
L
R
E
C
O
R
AMPLE RA  
TE CONVER  
TER 12-56kHz  
D
L
E
V
E
L
C
O
N
T
R
O
L
Important!  
1)This CD recorder is designed for regular  
CD(RW)s.Therefore, do not use any accessories such  
as disc stabilizer rings or CD treatment sheets, etc. as  
offered on the market, because they may cause  
jamming of the changer mechanism.  
2) Do not load more than one disc into one tray.  
1 Press OPEN/CLOSE to open the disc tray.  
OPENlights up.  
2 Insert a CD, CDR or CDRW in the appropriate recess in  
the tray, label side up.  
3 Press OPEN/CLOSE to close the tray (see also Playing a CD).  
CLOSElights up, followed by READINGthe display will  
show the type of disc that has been inserted.  
0
If a blank or partly-recorded CDR or unfinalized CDRW is  
inserted, the CD recorder will calibrate the disc for  
optimum recording. During this process the display will first  
show INITIALIZING and then the number of audio  
tracks. Calibration can take up to 25 seconds.  
0
0
If a CDR(W) is finalized, d will show on the display.  
If CD-text is available the ALBUM/ARTISTwill scroll by.  
Notes:  
Only Audio CDs will be accepted. If a non-audio disc is  
inserted, the display will show: WRONG DISC/  
USE AUDIO CD.  
For recording it is important that the blank disc is completely  
free from dust particles or scratches (see maintenance).  
15  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 16  
Recording general  
Introduction  
You will soon discover how easy it is to make your own  
CDs.Your recorder offers several recording modes:  
General information on  
recording  
It is advisable to use a CDRW disc for your first try.  
0
0
During high speed recording, the original recording quality  
will be maintained.  
For recording from internal CD-deck:  
RECORD FAST (high speed digital recording)  
- fast recording of a disc or programmed tracks.  
REC LISTEN (normal speed digital recording)  
- listening to a recording while making it.  
When Auto track is on (default setting), track numbers will  
automatically be increased during recording.  
0
0
By programming tracks first, a compilation can be recorded.  
MAKE CD (high speed digital recording and auto-finalize)  
- fast recording of a disc or programmed tracks.  
Recording will be finalized automatically.  
If a finalized CD recordable disc is inserted in the CD  
recorder, FINALIZED CDwill be displayed when REC  
TYPE is pressed. Recording will not be possible.  
For recording from external sources:  
REC EXT DISC (automatic start of recording)  
- to make an automatic recording of an external source  
simply by starting the source.  
0
If a finalized CD rewritable disc is inserted in the CD  
recorder, UNFINALIZEand PRESS ENTERwill be  
displayed when the RECTYPE is pressed. If ENTER is  
pressed, the disc will be unfinalized.  
REC EXT MAN (manual start of recording)  
- to start a manual recording from an external source  
simply by pressing the RECORD key.  
0
0
The recording procedure is the same for CDRs and  
CDRWs.  
The CD recorder deck is able to record CD text from the  
internal CD player deck only. (If not subject to copy  
protection)  
Important: Use only discs with CDR AUDIO only or  
CDRW AUDIO only logo. Discs for use in a personal  
computers CD-(re)writer cannot be used in an Audio  
CD-recorder.  
0
0
0
There must be at least 7 seconds of recording time left on  
the disc, otherwise you will not be able to enter record  
standby mode. DISC FULL will then show on the display.  
If you want to play the recorded CDR disc on a  
regular CD player, it must be nalized.  
If the display indicates COPY PROTECT no digital  
recording can be made of the source material. Recording  
will not start.  
Finalizing is a simple procedure, necessary to:  
- be able to play recordings on a CD PLAYER,  
- avoid further unwanted recordings on a disc,  
- avoid erasure of tracks on a CDRW,  
- write CD text on a CDR(W).  
The Serial Copy Management System (SCMS) only allows  
digital recording under specific conditions:  
- This means that it is not possible to make a digital copy  
from a digital copy.  
- Analog recording is always possible !  
- The number of recordings to be made from the original  
is unlimited.  
Finalized CDRW discs play only on CDRW  
compatible CD players.  
Note: If during recording ANALOG RECappears, the track will  
be recorded as analog, at normal speed.All other tracks will be  
copied normally (at double speed).  
0
0
A maximum of 99 tracks can be recorded on a disc.  
Minimum allowable track length is 4 seconds.  
For external recordings from CD changers always use REC  
EXT DISC.  
16  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 17  
How to record from the internal deck  
0
If STOP 9was pressed within 3 seconds after RECORD, no  
Recording an entire CD  
recording will take place.  
After recording, the display shows UPDATEfor several  
seconds.TheTotal time indications can differ slightly.  
However, no music information is lost.  
EASY  
JOG  
STORE/  
MEN  
CAN  
CEL/  
U
DELE  
TE  
CD  
ENTER  
Notes:  
In this Recording mode, the Pause function is not operative.  
We advise you to leave the recording level at its factory  
setting (0 dB). If the recording level is to low, check if the setting  
is 0 dB with the EASY JOG.  
OPEN / CLOSE  
REC  
PLAAY  
/
PA  
S
USE  
STOP  
RECORD  
EXT  
SOURCE  
TYPE  
FINA  
LIZE  
ERAS  
E
CD  
R
ANALOG  
Finalizing  
CD  
R
77  
X A  
UD  
IO  
C
D
R
ECO  
RDE  
R
In ‘MAKE CD’ recording mode your disc will be  
automatically finalized, so it can be played on any CD player.  
PROG  
SHUFFLE  
PHONES  
DISPLA  
Y
SCROLL  
REPEA  
T
DJ MODE  
After recording, the display shows UPDATEfor several  
seconds. Finalizing starts and the display shows  
FINALand the remaining finalization time.TheTotal time  
indications can differ slightly. However, no music  
information is lost.  
The MAKE CDrecording mode is a fast and easy way to  
copy an entire CD.  
During high speed recording the sound is not audible.  
Important:After this recording the disc is nalized  
and cannot be recorded on anymore.  
Preparing  
1 Place an unfinalized CDR(W), absolutely free of scratches  
and dust particles in the CDR tray.  
Place the disc from which you want to record in the right  
CD tray.  
2 With the CD recorder stopped, press RECTYPE three  
times to select MAKE CD for recording of an entire CD or  
a program of tracks and to automatically finalize the  
recording.  
The display first shows MAKE CD.  
The fRECORDglabel starts blinking.After 3 seconds  
the display shows the remaining CDR(W) recording  
time on the left and total time of source on the right.  
(every 2 seconds PRESS RECORDis displayed.)  
0
If DOES NOT FITappears on the display, there is not  
enough recording space on the CDR(W) disc.  
You can press RECORD: only complete tracks that still fit  
on the CDR(W) will be recorded  
Recording  
3 Press RECORD to start recording.  
WAITlights up.The display shows the total remaining  
time for the selected recording. High speed recording  
starts. fRECORDglights continuously.  
0
0
To check the track number and track time, press Display.  
This can be done during recording.  
Recording will stop automatically.  
Note: Copy prohibited tracks will be copied analog.  
ANALOG RECis displayed.  
4 To stop recording manually, press STOP 9.  
UPDATElights up, fRECORDggoes out and recording  
stops. (Minimal track length must be  
4 seconds otherwise silence will be added to the track.)  
17  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 18  
How to record from the internal deck  
0
For recording from the internal deck (RECORD FAST, REC  
Recording a single track  
LISTEN or MAKE CD) we advise you to leave the  
recording level at its factory setting (0 dB).  
EASY JO  
G
STORE  
MEN  
/
CA  
NCE  
DELE  
L/  
Note: It is possible to equalise the recording level of tracks  
recorded from different CD’s. See the next paragraph.  
U
TE  
CD  
ENTER  
0
0
To check the track number and track time, press Display.  
This can be done during recording.  
OPEN / CLOSE  
REC  
PLAY  
/
PA  
A
S
USE  
STOP  
RECORD  
EXT  
SOURCE  
TYPE  
FINA  
LIZE  
ERAS  
E
CD  
R
Recording will stop automatically.  
Note: Copy prohibited tracks will be copied analog. ANALOG  
RECis displayed.  
ANALOG  
CD  
6 To stop recording manually, press STOP 9.  
UPDATElights up, fRECORDggoes out and recording  
stops. (Minimal track length must be  
R
77  
X A  
UD  
IO  
C
D
R
ECO  
RDE  
R
PROG  
SHUFFLE  
PHONES  
DISPLA  
Y
DJ MODE  
SCROLL  
REPEA  
T
4 seconds otherwise silence will be added to the track.)  
These recording modes are ideal for recording tracks from  
several CD’s. If you are making a compilation CD you can  
do it either at high speed (RECORD FAST) or while  
listening to the tracks (RECORD LISTEN). Finalization is  
not executed automatically.  
7 Press STOP 9one more time to remove the program of  
tracks, if any.  
8 Insert a new disc from which you want to record and  
resume at step 1.  
0
If STOP 9was pressed within 3 seconds after RECORD,  
Preparing  
no recording will take place.  
1 Place an unfinalized CDR(W), absolutely free of scratches  
and dust particles in the left CDR tray.  
0
After recording, the display shows UPDATEfor several  
seconds.TheTotal time indications can differ slightly.  
However, no music information is lost.  
Place the disc from which you want to record in the right  
CD tray.  
Note: In this Recording mode, the Pause function is not  
operative.  
2 With the CD recorder stopped, press RECTYPE one time  
to select RECORD FAST or two times to select RECORD  
LISTEN.  
Finalizing  
The display first shows RECORD FASTor RECORD  
LISTEN.  
If you want to play the recorded CD(RW) on a normal  
CD player, you must first finalize the disc. Please note that  
you cannot add anymore tracks on a finalized CDR.  
See Finalizing CDR and CDRW discs.When all tracks are  
recorded you can finalize the CDR(W) disc:  
The fRECORDglabel starts blinking.After 3 seconds  
the display shows the remaining CDR(W) recording  
time on the left and total time of source on the right.  
(every 2 seconds PRESS RECORDis displayed.)  
9 With the recorder stopped press FINALIZE.  
3 Program the track(s) for recording.  
Press PROG to select one or more tracks for recording  
(see programming):  
The display shows FINALIZE CDand PRESS  
RECORD.  
10 Press RECORD.  
-
rotate the EASY JOG/ENTER key to the required track  
number, then press the key (or ENTER on the remote  
control)  
XX XXFINALand the approximate finalization time  
appear on the display.  
or  
0
0
The display counts down through the finalization. On  
completion, the total number of tracks and the total time  
recorded appears on the display.  
-
directly select the track number via the 10-keypad on the  
remote control, then press the ENTER key to confirm your  
selection and go to the next step.  
For CDR(W), r changes to d on display.  
4 Press STOP 9or PROG to end programming.  
Notes:  
PROG lights continuously.  
Finalizing will take at least 2 - 4 minutes.  
During finalization, the CD recorder accepts no operating  
commands.  
Recording  
5 Press RECORD to start recording the program.  
WAITlights up.The display shows the total remaining  
time for the selected recording. High speed recording  
starts. fRECORDglights continuously.  
When a CDR is finalized no more recordings can be added.  
18  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 19  
Adjusting recording level  
Recording from internal deck  
Recording from external source  
Set the recording level, if necessary, to make compilations  
from different discs with equalized volume levels. Pre-  
recorded CD’s often have different volume levels.When  
playing back your compilation you could hear these  
differences in volume between tracks.  
Some external analog sources have such high output levels,  
that you may need to adjust the recording level to ensure  
good quality recordings without distortion.  
1 Place an unfinalized CDR(W), absolutely free of scratches  
and dust particles in the left CDR tray.  
Amplifying a of digital audio information stream will distort  
the audio signal.This means that digital signals can only be  
decreased in volume to obtain equal audio levels for  
different tracks. Our advise is to record all tracks on -3dB  
(or lower if needed). In this way it is possible to  
- increase (0 dB is maximum) the volume level for  
those tracks with a weaker signal,  
2 Press SOURCE repeatedly to select the ANALOG input  
ANALOG lights up and ANALOGwill appear on the  
display.  
3 With the CD recorder stopped, press RECTYPE five times  
to select REC EXT MAN.  
d starts to flash and the display shows  
PRESS RECORD.  
- decrease (-3 dB or less) the volume level for those  
tracks with a stronger signal.  
4 Start the source by pressing PLAY/PAUSE 2;.  
DO NOT start recording!  
For pre-listening you need to make a test recording with a  
CDRW disc in the left disctray:  
5 Rotate the EASY JOG/ENTER key to decrease the record  
level until, on the Record/Play Level bar, all the blue  
segments are alight, but the red segments do not light  
continuously during the loudest passages.  
1 After pressing the RECTYPE key rotate the EASY  
JOG/ENTER key to decrease the level (e.g. -3dB) for the  
track(s) of the first disc.  
6 Press STOP 9on the CD recorder and on the source.  
2 Press RECORD to record a track.  
3 Press STOP.  
The adjusted recording level is stored in the memory  
of your recorder (also when powered off!).  
4 Listen to the track(s) of the next disc to determine the  
Note:The recording level can also be adjusted for digital or  
optical recordings after selecting the DIGITAL 1or  
OPTICALinput.  
recording level.  
5 Press the RECTYPE key, rotate the EASY JOG/ENTER key  
to increase/decrease the recording level and repeat step 2  
and 3.  
6 Judge the various recording levels from your test recording.  
Now you are able to make a final recording and preset the  
correct recording level of each individual track before you  
record it.  
7 Place the CDR(W) disc on which you want to make your  
final recording.  
Notes:  
During recording it is possible to adjust the recording level  
with the EASY JOG/ENTER key.  
The adjusted recording level is stored in the memory of your  
recorder (also when powered off!).  
During RECORD FAST mode no sound and therefor no  
adjustments are audible.  
19  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 20  
How to record from an external source  
Tip:  
Recording from LP’s or cassettes  
For the best recording results we advise you to rst  
make a recording onto a CDRW (rewritable) disc.  
If for instance you forgot to add track increments or  
made another mistake during recording this can  
always be corrected.When your recording is complete  
and correctly recorded:  
EASY  
J
OG  
STOR  
E/  
C
ANC  
EL/  
MENU  
DELE  
TE  
CD  
ENTER  
- nalize the CDRW disc  
OPEN / CLOSE  
REC  
PLAY  
/
P
AUSE  
STOP  
RECORD  
EXT  
SOURCE  
TYPE  
FINA  
LIZE  
- record this disc onto a CDR (recordable) disc, using  
the Make CDfunction. (See paragraph Recording  
an entire CD)  
ERAS  
E
CDR  
ANALOG  
Preparing  
CDR 77X  
AUDIO CD RECO  
RDER  
PROG  
SHUFFLE  
PHONES  
DISPLA  
Y
DJ MODE  
SCROLL  
REPEA  
T
1 Place an unfinalized CDR(W), absolutely free of scratches  
and dust particles in the left CDR tray.  
2 Press SOURCE repeatedly until ANALOG lights up and  
Make sure that the turntable or cassette deck is connected  
with its analog out connectors to the amplifier/receiver  
which is connected to the analog in connectors of your  
CD-recorder: connection is ANALOG.  
ANALOGappears on the display.  
3 With the CD recorder stopped press RECTYPE five times  
to select REC EXT MAN.  
The display shows REC EXT MANfollowed by WAIT. If  
MANUAL starts to flash you can insert track increments  
manually (AUTO TRACK is set to OFF).After a few  
seconds PRESS RECORDfollowed by the remaining  
time and track number appear on the display.  
Note: It is not possible to connect a turntable directly to the CD  
recorder.  
Track increments  
0
0
For recordings from ‘noisy’ external analog sources like LP  
or cassette tapes we strongly recommend to switch Auto  
Track to OFF and insert track numbers manually.  
0
You can record a 3-second silence at the start of a track by  
pressing PLAY/PAUSE 2;on the CD recorder before  
starting the recording.  
AutoTrack is default switched on. If you wish to switch  
AutoTrack off or on:  
Recording  
1 Press STORE/MENU.  
4 To start recording, press RECORD on the CD recorder  
TEXT EDITwill appear on the display.  
and immediately start the turntable.  
2 Rotate the EASY JOG/ENTER key to select the AUTO  
TRACK submenu.  
dlights continuously.The track number and recording  
time will appear on the display.  
AUTO TRACKwill appear on the display.  
0
To interrupt recording, press PLAY/PAUSE 2; on the  
CD recorder.  
d starts to flash. Resume at step 4.  
3 Press EASY JOG/ENTER to confirm.  
ON or OFFwill appear on the display.  
4 Turn the EASY JOG/ENTER key to select Auto track ONor  
5 To stop recording, press STOP 9 on the CD recorder.  
OFF.  
UPDATE lights up and dgoes out.  
5 Press EASY JOG/ENTER to confirm.  
After recording the display will show UPDATE for several  
seconds.  
AUTO TRACKwill appear on the display.  
6 Press STOP 9to exit.  
Note:With AUTOTRACK OFF, the recording will not stop  
automatically.  
During analog and digital recording, you can always insert  
track numbers manually by pressingTRACK INCR. on the  
remote control.The minimum track length is 4 sec.Track  
numbers cannot be changed after recording.  
Finalizing  
If you want to play the recorded CD(RW) on a normal  
CD player, you must first finalize the disc. Please note that  
you cannot add anymore tracks on a finalized CDR.  
See Finalizing CDR and CDRW discs.  
20  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 21  
How to record from an external source  
0
You can record a 3-second silence at the start of a track by  
pressing PLAY/PAUSE 2;on the CD recorder before  
starting the recording.  
Autostart recording  
OPEN / CLOSE  
REC  
PLAY/  
/
P
PA  
S
USE  
STOP  
RECORD  
EXT  
TYPE  
FINA  
LIZE  
ERAS  
E
SOURCE  
CD  
R
Recording  
4 To start recording, press PLAY on the external CD player.  
dlights continuously.The track number and recording  
time left appear on the display.  
ANALOG  
CD  
R
77  
X
A
UD  
IO  
C
D
R
ECO  
RDE  
R
PROG  
SHUFFLE  
PHONES  
DISPLA  
Y
DJ MODE  
SCROLL  
REPEA  
T
Note: In case the recording does not start use the Manual  
recording mode. See previous paragraph:Recording from LP’s or  
cassettes’.  
This feature enables you to make fast and easy recordings  
of an external source.The recorder will detect the start of  
the source and track increments are automatically detected  
from digital source material.Track increments can be added  
manually.  
0
0
0
To interrupt recording, press PLAY/PAUSE 2; on the  
CD recorder.  
d starts to flash. Resume at step 1.  
If, however, you start the source during a track, recording  
will start at the beginning of the next track or after  
2.7 seconds of silence in analog recordings.  
Preparing  
1 Place an unfinalized CDR(W), absolutely free of scratches  
and dust particles in the left CDR tray.  
Track numbers are automatically incremented. During an  
analog recording you can insert additional track numbers  
during recording by simply pressingTRACK INCR. on the  
remote control.  
2 Press SOURCE repeatedly to select the type of connection  
to your source of recording:  
DIGITAL I, OPTICAL I or ANALOG lights up and  
DIGITAL1, OPTICALor ANALOGappears on the  
display.  
0
0
The EASY JOG/ENTER key can be used to adjust the  
recording level.The setting of the recording level is stored  
in the recorder’s memory.  
Examples:  
- CD-player is connected with its digital out connector  
directly to the digital in connector of your CD-recorder:  
connection is DIGITAL I.  
The recorder stops automatically in case of digital recording  
from a CD.With AUTOTRACK ON, the recorder pauses  
and waits for a new track for 1 minute before going to  
stop. Recordings from DAT, DCC or analog sources will  
only stop after 20 seconds of silence.  
- CD-player is connected with its analog out connectors  
directly to analog in connectors of your CD-recorder:  
connection is ANALOG.  
5 To stop recording, press STOP 9 on the CD recorder.  
UPDATE lights up and dgoes out.  
-Turntable is connected with its analog out connectors to  
amplifier/receiver which is connected to the analog in  
connectors of your CD-recorder: connection is  
ANALOG.  
After recording the display will show UPDATE for several  
seconds.  
Finalizing  
3 With the CD recorder stopped press RECTYPE four times  
to select REC EXT DISC.  
If you want to play the recorded CD(RW) on a normal  
CD player, you must first finalize the disc. Please note that  
you cannot add anymore tracks on a finalized CDR.  
See Finalizing CDR and CDRW discs.  
SYNC starts to flash and the display shows REC EXT  
DISCfollowed by WAIT.After a few seconds PRESS  
RECORDfollowed by the remaining time and track  
number appear on the display.  
0
If CHECK INPUTmessage and the input label DIGITAL I or  
OPTICAL I also flashes, switch on the external source, check  
the digital connection or select the right input with the  
SOURCE key.  
21  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 22  
Finalizing  
Finalizing CDR & CDRW discs  
Unfinalizing CDRW discs  
During finalizing, an index is written to the disc.  
For CDRW discs only  
Finalizing is a simple procedure that is necessary in order  
to:  
- be able to play recordings on a CD PLAYER  
- avoid further unwanted recordings on a disc,  
- avoid erasure of tracks on a CDRW,  
- write CD text on a CDR(W).  
If you want to make more recordings (or erase tracks) on a  
finalized disc, you must unfinalize it first.The index of the  
disc content will be removed.  
To unfinalize  
1 With the CD recorder stopped, press RECTYPE or ERASE.  
UNFINALIZEand PRESS ENTERwill appear on the  
display.  
Note:When a CDR has been finalized, no more recordings can  
be added.  
2 Press the EASY JOG/ENTER key.  
The disc will now be unfinalized and can be used again  
to record.  
Auto finalizing  
The CDR(W) is automatically finalized when using the MAKE  
CD recording function.  
Note:After unfinalizing the recorder enters:  
- RECORD FASTmode if the REC TYPE key was pressed  
before unfinalizing  
- ERASE TRACKmode if the ERASE key was pressed before  
unfinalizing  
Manual finalizing  
1 Make sure the disc (in the CD recorder) is absolutely free  
of scratches and dust particles.  
2 With the recorder stopped, press FINALIZE.  
The display will show FINALIZE CD and PRESS  
RECORD.  
0
If no further recording or erasure is required,  
press STOP 9.  
3 Press RECORD.  
Notes:  
XX XX FINALand the approximate finalization time is  
shown on the display.  
Unfinalizing will take approximately 1.5 minutes.  
When unfinalizing a CDRW disc with text available, this text  
will be transferred to the CD recorder memory. However,  
if the text memory is full, the message  
MEMORY FULL/FINALIZE CDwill be displayed.Text must  
be erased, stored for other discs, or another disc must be  
finalized in order to create space in the memory.  
The display counts down through the finalization.  
Upon completion, the total number of tracks and the  
total time recorded will appear on the display.  
For CDR(W), r changes to d on display.  
Finalizing will take at least 2- 4 minutes.  
Note: During finalization, the CD recorder will not accept  
operating commands.  
22  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 23  
Erasing  
Erasing CDRW discs content  
To erase the entire disc:  
1 Press ERASE twice.  
The display will show the number of tracks and their  
total playing time. ERASE DISC and PRESS RECORD  
will light up.  
EASY  
JOG  
STORE/  
MEN  
CAN  
CEL/  
U
DELE  
TE  
CD  
ENTER  
0
If the disc is finalized,  
will appear on the display after  
d
inserting a CDRW in the recorder.The recorder will ask  
you to confirm unfinalizing first. Confirm by pressing the  
EASY JOG/ENTER key or ENTER on the remote control.  
OPEN / CLOSE  
REC  
PLAY  
/
P
AUSE  
T
STOP  
RECORD  
EXT  
SOURCE  
TYPE  
FINA  
LIZE  
ERAS  
E
CD  
R
2 Press RECORD.  
For unnalized CDRW discs only!  
You can erase:  
-Tracks can only be erased from the end.  
The display will show the total countdown time and  
ERASE The entire disc will be erased.  
Erasing an entire disc may take up to 15 seconds.  
1
2
6
7
8
3
4
5
9
10  
With the EASY JOG you can select more then one track to  
be erased simultaneously.  
1
2
6
7
8
3
4
5
9
10  
Note: It is not possible to erase tracks within the sequence.  
- It is also possible to erase the entire disc at once.  
To erase one or more tracks from the end:  
1 Press ERASE once.  
The display will show the number of tracks and their  
total playing time. ERASE TRACKand PRESS RECORD  
will light up.  
0
If the disc is finalized,  
will appear on the display after  
d
inserting a CDRW in the recorder.The recorder will ask  
you to confirm unfinalizing first. Confirm by pressing the  
EASY JOG/ENTER key or ENTER on the remote control.  
2 Select the track(s) you wish to erase by turning the EASY  
JOG/ENTER key to the left.  
The selected track numbers will start blinking on the  
track bar.  
The display will show the remaining time after erasing  
the selected track(s).The track shown will be included in  
the tracks erased.  
3 Press RECORD.  
The display will show the total countdown time and  
ERASE.  
After the selected track(s) has/have been erased, the  
display will show the number of remaining tracks and  
their total playing time.  
23  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 24  
Playing  
Playing CD’s (Changer mode)  
Selecting a track  
Your CD recorder is able to play the two decks sequentially  
(CHANGER mode).This is the default setting.  
EASY  
JOG  
STOR  
MEN  
E/  
C
ANC  
EL/  
U
DELE  
TE  
CD  
1 Select Changer mode using the DJ MODE key.  
CHANGERappears on the display and iCHANGERh  
lights up.  
ENTER  
2 On the deck you want to play, press PLAY/PAUSE 2;to  
start CD play.  
OPEN / CLOSE  
REC  
PLAY  
/
P
AUS  
E
TO  
STOP  
RECORD  
EXT  
SOURCE  
TYPE  
FINA  
LIZE  
ERASE  
CD  
R
2lights up, the track number and track time of the track  
in play appear on the display.  
After playing the first disc, the second disc will  
automatically be played.  
Press the CDR or CD key to select the deck you want to  
control.  
0
Press Display once, twice or three times to see:  
Remaining track time, total remaining time, permanent  
text information (see Menu mode).  
Selecting a track during play  
1 Turn the EASY JOG/ENTER key until the required track  
0
0
To interrupt play temporarily, press PLAY/PAUSE 2;again.  
number appears on the display.  
;lights on the display.  
Play will skip to the beginning of the selected track.  
To continue play, press PLAY/PAUSE 2;again.  
3 To stop play, press STOP 9.  
The number of tracks and the total playing time appear  
on the display.  
Selecting a track when CD play is stopped  
1 Turn the EASY JOG/ENTER key until the required track  
number appears on the display.  
0
If you want to see the information about the other deck,  
press the CDR key or the CD key in the display frame.  
2 Press EASY JOG/ENTER or ENTER on the remote control  
to confirm or press PLAY/PAUSE 2; to start playing.  
Note:You can also enter the required track number using the  
numerical keys on the remote control. For 2 digit numbers,  
press the keys in rapid succession.  
Playing CDs on Deck 1 and Deck 2  
simultaneously (DJ mode)  
With this double deck it is possible to play the CD  
recorder deck and/or the CD player deck individually (at  
the same time). In this case the extra CD output must also  
be connected to an amplifier.  
1 Select DJ mode using the DJ MODE key.  
DJ MODEappears on the display and j klights up.  
2 On the deck you want to play, press PLAY/PAUSE 2;to  
start CD play.  
2lights up and the track number and track time of the  
track in play appear on the display.  
0
0
You can also play the two decks at the same time.  
By pressing the CDR key or the CD key you can choose  
the deck you want to listen to.  
Press DISPLAY once, twice or three times to see:  
remaining track time, total remaining time, permanent  
text information (see Menu mode).  
0
0
To interrupt play temporarily, press PLAY/PAUSE 2;again.  
;lights on the display.  
To continue play, press PLAY/PAUSE 2;again.  
3 To stop play, press STOP 9.  
The number of tracks and the total playing time appear  
on the display.  
0
If you want to see the information about the other deck,  
press the CDR key or the CD key in the display frame.  
24  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 25  
Playing  
0
A program for playback can be made from both the disc in  
the recorder deck and the disc in the player deck.A  
program for recording can only be made from the disc in  
the player deck.  
Search  
EAS  
Y
JO  
G
STO  
RE/  
CAN  
DEL  
CEL  
/
MEN  
U
ETE  
CD  
Programming  
1 Select Changer mode or DJ mode using the DJ MODE key.  
ENTER  
CHANGER or DJ MODE appears on the display.  
2 Press CDR or CD to select the required deck.  
Selected key lights up.  
1 Hold down 5or 6(in Play mode).  
The player first searches backwards or forwards at  
10 times normal speed with sound at low volume, then  
goes to 50 times normal speed with sound muted.  
3 In Stop mode press PROG to enter Program mode.  
PROG flashes and PROGRAM followed by track  
information appears on the display.  
2 Release the button at the desired passage.  
4 Select the desired track numbers by turning the EASY  
Play will start at the desired passage.  
JOG/ENTER key left or right and store by pressing ENTER.  
or:  
Note: During Shuffle, RepeatTrack or Programmed play, search  
is restricted to within the track being played at the time.  
Key in a track number with the number keys and press  
ENTER to confirm. For 2-digit numbers, press the keys in  
rapid succession.  
The track will be stored in the program.  
The track number, total program time and the number  
of programmed tracks (STEPS) are displayed.  
Shuffle (random order) play  
Only in Changer mode.  
1 Press SHUFFLE before or during CD play to start shuffle  
5 Repeat step 4 for all tracks to be programmed.  
play.  
6 Press STOP 9or PROG to end programming.  
The tracks on the CD (or program if set) will play in  
PROG lights continuously.  
random order.  
7 Press PLAY/PAUSE 2; to start programmed play.  
2 Press SHUFFLE again to return to normal CD play.  
CD recorder goes to Stop mode.  
Notes:  
To review the program, press PROGRAM, followed  
by 5 or 6 with the CD recorder in Stop mode.  
To add more tracks to the program, repeat steps 3 to 7.  
If you try to store more than 99 tracks, PROG FULLwill  
appear on the display.  
Note: Shuffle is also cleared when you open the disc tray.  
Repeat CD, track or program  
1 Press repeat one or more times during CD play.  
When REPEAT TRACK lights up, the current track will  
play repeatedly.When REPEAT ALL lights up, the entire  
disc or program plays repeatedly.  
Clearing a program  
1 Press STOP 9 if necessary to stop programmed play.  
2 Press STOP 9 again to clear the program.  
PROG will disappear from the display.  
2 To return to normal play, press REPEAT one or more times  
until:  
0
The program is also cleared when you open the disc tray.  
The REPEAT text disappears from the display.  
Erasing a track from a program  
Note:  
1 In Stop mode press PROG to enter Program mode.  
2 Use 5 or 6 to select the track from to be deleted.  
The track number and program step will be shown on  
the display.  
You can use shuffle in combination with REPEAT ALL or  
programmed play.  
REPEAT is also cleared when you open the disc tray.  
3 Press CANCEL/DELETE to erase the track from the  
program.  
Programming tracks  
You can program up to 99 tracks to play in any desired  
sequence.  
The remaining program steps and the remaining playing  
time on the program will be displayed.  
0
0
4 Repeat steps 2 and 3 for all tracks to be erased.  
Tracks can be programmed more than once, but each time  
counts as a track (STEP).  
5 Press STOP 9or PROG to end erasing.  
PROG will light up continuously.  
25  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 26  
Menu mode  
Remarks about Menu mode  
General operation of Menu  
0
In Menu mode you will have access to a number of features  
which are not available via the regular keys (on the deck’s  
front and the remote control).  
Menu active in Recording or Stop mode!  
1 When using the remote control, select CDR first.  
2 Press STORE/MENU on the deck or the remote control to  
0
TheTEXT submenus (A & B) allow you to give names to  
discs and tracks.The disc and track names will be displayed  
during playback.  
enter Menu mode.  
TEXT EDITwill appear on the display.  
3 Rotate EASY JOG/ENTER to select the required  
0
0
In the RECORDING submenus (D & E) you can set Auto  
Track and Balance.  
submenus:.  
4 Press EASY JOG/ENTER to confirm your selection.  
All settings (except Balance) made in Menu mode will be  
stored in the deck’s memory and can be called up and  
changed at any time.  
5 Rotate EASY JOG/ENTER to select options in the  
submenus.  
6 Press EASY JOG/ENTER to confirm selections.  
7 Press STORE/MENU to store settings and return to the  
submenu.  
8 Press STOP 9 to store settings and exit Menu mode.  
Note:Text can only be edited for unfinalized discs. (Finalized  
CDRW discs must be unfinalized first.)  
EASY JOG  
STORE/  
MEN  
CANCEL/  
DELETE  
U
MAIN MENU  
LEVEL 1  
LEVEL 2  
EN  
TER  
REM  
REC TIME TRACK  
TOTAL REM TRACK TIME  
STEP  
ALBUM ARTIST  
ALBUM TITLE  
ARTIST TR 1  
TITLE TR 1  
ARTIST TR N  
TITLE TR N  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17  
A
B
SYNC MANUAL  
RECORD  
PROG  
SHUFFLE ALL  
REPEAT  
CHANGER  
CD  
DIGITAL  
OPTICAL  
ANALOG  
I
I
CD  
RW  
RW  
CDR  
CD  
SCAN TRACK  
REM  
REC TIME TRACK  
TOTAL REM TRACK TIME  
STEP  
2
J
K
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17  
SYNC MANUAL  
RECORD  
PROG  
9
;
SHUFFLE ALL  
REPEAT  
SCAN TRACK  
CHANGER  
CD  
DIGITAL  
OPTICAL  
ANALOG  
I
I
CD  
5
6
RW  
RW  
MENU/  
STORE  
PROG.  
ENTER CANCEL  
REM  
REC TIME TRACK  
TOTAL REM TRACK TIME  
STEP  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17  
ALL TEXT  
REM  
REC TIME TRACK  
TOTAL REM TRACK TIME  
STEP  
SYNC MANUAL  
RECORD  
PROG  
SHUFFLE ALL  
REPEAT  
CHANGER  
CD  
DIGITAL  
OPTICAL  
ANALOG  
I
I
CD  
RW  
RW  
SCAN TRACK  
ALBUM ARTIST  
ALBUM TITLE  
ARTIST TR 1  
TITLE TR 1  
ARTIST TR N  
TITLE TR N  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17  
SYNC MANUAL  
RECORD  
PROG  
SHUFFLE ALL  
REPEAT  
I
I
CD  
CHANGER  
CD  
DIGITAL  
OPTICAL  
ANALOG  
RW  
RW  
SCAN TRACK  
REM  
REC TIME TRACK  
TOTAL REM TRACK TIME  
STEP  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17  
SYNC MANUAL  
RECORD  
PROG  
SHUFFLE ALL  
REPEAT  
I
I
CD  
CHANGER  
CD  
DIGITAL  
OPTICAL  
ANALOG  
RW  
RW  
SCAN TRACK  
REM  
REC TIME TRACK  
TOTAL REM TRACK TIME  
STEP  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17  
"TITLE CD 1"  
"TITLE CD 2"  
"TITLE CD 3"  
C
SYNC MANUAL  
RECORD  
PROG  
SHUFFLE ALL  
REPEAT  
CHANGER  
CD  
DIGITAL  
OPTICAL  
ANALOG  
I
I
CD  
RW  
RW  
SCAN TRACK  
"TITLE CD n"  
REM  
REC TIME TRACK  
TOTAL REM TRACK TIME  
STEP  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17  
D
E
SYNC MANUAL  
RECORD  
PROG  
SHUFFLE ALL  
REPEAT  
I
I
CD  
CHANGER  
CD  
DIGITAL  
OPTICAL  
ANALOG  
RW  
RW  
SCAN TRACK  
ON  
OFF  
REM  
REC TIME TRACK  
TOTAL REM TRACK TIME  
STEP  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17  
SYNC MANUAL  
RECORD  
PROG  
SHUFFLE ALL  
REPEAT  
I
I
CD  
CHANGER  
CD  
DIGITAL  
OPTICAL  
ANALOG  
RW  
RW  
SCAN TRACK  
L 100 R 100  
26  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 27  
Menu mode  
A.Text input  
B. Erasing text  
ALL TEXT  
TEXT EDIT  
TEXT ERASE  
ALBUM ARTIST  
ALBUM ARTIST  
ALBUM TITLE  
ARTIST TR N  
TITLE TR N  
ALBUM TITLE  
ARTIST TR N  
TITLE TR N  
Your recorder can display CD text information such as  
artist name, album title etc. that is present on a disc. Only  
CD players with CD text capability can read and display  
CD text.  
1 Press STORE/MENU.  
TEXT EDIT will appears on the display.  
2 Rotate the EASY JOG/ENTER key to select theTEXT  
ERASE submenu.  
CD text can be added and/or changed to a recording.This  
can be done in Stop mode or during recording.With this  
feature you can store the name of artist and album to a  
CDR as well as a track title and name of artist per title.  
TEXT ERASE will appear on the display.  
3 Press EASY JOG/ENTER to confirm.  
ALL TEXT appear on the display.  
4 Rotate EASY JOG/ENTER to select the required option in  
the submenu: ALL TEXT, ALBUM ARTIST, ALBUM  
TITLE, ARTIST TR 1, TITLE TR 1, etc.  
Text will be stored in the recorder memory and can be  
edited until the CDR is finalized.When a CDR(W) is  
finalized, the CDText will be written on the disc and  
removed from the recorder’s memory.Text on a (finalized)  
CDRW can be edited at any time.  
5 Press EASY JOG/ENTER to confirm.  
The display will ask you to reconfirm your selection.  
ERASE OK will appear on the display.  
1 Press STORE/MENU.  
6 Press EASY JOG/ENTER to reconfirm.  
TEXT EDIT will appear on the display.  
UPDATE will appear on the display.  
2 Press EASY JOG/ENTER to confirm.  
7 Press STORE/MENU to return to the submenu or STOP 9  
ALBUM ARTIST will appear on the display.  
to exit.  
3 Rotate EASY JOG/ENTER to select the required option in  
the submenu: ALBUM ARTIST, ALBUM TITLE,  
ARTIST TR 1, TITLE TR 1, etc.  
4 Press EASY JOG/ENTER to confirm.  
The first character space appears on the display.  
5 Select the characters by rotating the EASY JOG/ENTER key  
or by pressing the corresponding numeric/alphabet key on  
the remote control.  
6 Press EASY JOG/ENTER to store each character and move  
to the next cursor position.  
0
With the 5 and 6 keys you can move to a required  
cursor position.  
0
With the CANCEL key you can delete a character.  
7 Press STORE/MENU to store the name you have entered  
and return to the submenu, or STOP 9 to exit.  
UPDATEwill appear on the display.  
Notes:  
A maximum of 60 characters can be stored per item.  
By pressing the EASY JOG/ENTER key or ENTER on the  
remote control without selecting a character first, you can insert  
a space between characters.  
When an artist’s name has been stored for a certain track,  
the name will automatically be copied for the next track.The  
name can be confirmed by pressing STORE/MENU or a new  
name can be entered as described above.  
27  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 28  
Menu mode  
C. Reviewing CD text in memory  
D.Auto track increment  
MEMORY VIEW  
CD 1  
AUTO TRACK  
CD 2  
ON  
OFF  
CD N  
CD text is stored in the recorder’s memory.When a  
CDR(W) is finalized, the CDText will be written on the  
disc and removed from the recorder’s memory.With the  
MEMORYVIEW function you can view/delete the CD text  
in the recorder’s memory for each unfinalized disc.The  
amount of memory used is displayed each time the tray  
opens with an unfinalized CDR(W) inserted  
Track increments  
During synchronised recordings, track numbers will be  
copied from the original.This will be done automatically for  
digital sources. For analog recordings, the CD recorder can  
detect silences (longer then 2.7 seconds) in the source  
material and start a new track (Auto track increment).  
AutoTrack is however dependent on the quality of the  
analog source material and will not always increase the  
track number like on the original.  
(e.g. MEMORY 9%).  
1 Press STORE/MENU.  
TEXT EDIT will appear on the display.  
AutoTrack is default switched on. If you wish to switch  
AutoTrack off or on:  
2 Rotate the EASY JOG/ENTER key to select the MEMORY  
VIEW submenu.  
1 Press STORE/MENU.  
MEMORY VIEW will appear on the display.  
TEXT EDIT will appear on the display.  
3 Press EASY JOG/ENTER to confirm.  
The first album title in the recorder memory will appear  
on the display.  
2 Rotate the EASY JOG/ENTER key to select the AUTO  
TRACK submenu.  
AUTO TRACK will appear on the display.  
4 Select the album title you wish to erase.  
3 Press EASY JOG/ENTER to confirm.  
5 Press EASY JOG/ENTER to confirm.  
ON or OFF will appear on the display.  
ERASE MEMORY will appear on the display.  
4 Turn the EASY JOG/ENTER key to select Auto track OFF  
6 Press the EASY JOG/ENTER key to confirm the erasure of  
the text for that particular disc.  
or ON.  
5 Press EASY JOG/ENTER to confirm.  
UPDATE will appear on the display.  
AUTO TRACK will appear on the display.  
7 Press STORE/MENU to return to the submenu or STOP 9  
6 Press STOP 9 to exit.  
to exit.  
During analog recording, you can always insert track  
numbers manually by pressingTRACK INCR. on the remote  
control. It is not possible to add track numbers manually  
during digital recording.The minimum track length is 4 sec.  
Track numbers cannot be changed after recording.  
Notes:  
If there are no discs in the memory, the message MEMORY  
EMPTY will appear on the display.  
When the text memory of your CD recorder is full, the  
message MEMORY FULL will appear, followed by  
FINALIZE CD. If you want to add a CD to the list of discs  
for which text is stored, you will have to erase a disc from this  
list or finalize another disc for which text is stored.  
MEMORY FULL/FINALIZE CD may also appear when  
unfinalizing a CDRW disc for which text was stored (see  
‘Unfinalizing CDRW discs’).The same action(s) should be taken  
in order to obtain memory space.  
Note:AutoTrack is always active during synchronised  
recordings.  
28  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 29  
Menu mode  
E. Balance  
SET BALANCE  
L 100 R 100  
This feature is only active in Record/Standby mode  
1 Press STORE/MENU.  
TEXT EDIT will appear on the display.  
2 Rotate the EASY JOG/ENTER key to select the SET  
BALANCE submenu.  
SET BALANCE will appear on the display.  
3 Press EASY JOG/ENTER to confirm.  
FE and L 100 R 100 will appear on the  
display.  
4 Adjust recording balance by turning the EASY JOG/ENTER  
key.  
0
Turn to the left: the figure on the left (L XXX) counts  
down, that on the right counts up.  
0
Turn to the right: the figure on the right (R XXX) counts  
down, that on the left counts up.  
5 Press EASY JOG/ENTER to confirm.  
6 Press STORE/MENU to store settings.  
Note:The balance setting will not be stored once the recording  
is completed.  
29  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 30  
Fixing problems  
TIP:  
Check Display messages: the nature of a problem will in most cases be  
indicated with a display message.  
WARNING  
Under no circumstances should you try to repair the CD recorder  
yourself as this will invalidate the guarantee.  
Do not open the CD recorder as there is a risk of electric shock.  
If a fault occurs, rst check the points listed, before taking the CD  
recorder for repair. If you are unable to solve a problem by following  
these hints, consult your dealer or service centre.  
Laser safety  
This unit employs a laser. Only a qualied service person should remove  
the cover or attempt to service this device, due to possible eye injury.  
Problem  
Solution  
No power  
– ensure that the ON/OFF key is in the on position (red LED on): the CD  
recorder is in standby mode, press any key to activate it  
– make sure that the power cable is plugged in correctly  
– switch the recorder OFF and then immediately back ON  
– check the audio connections (external recording)  
– try using a different source on the amplifier  
– make sure the record level was correctly adjusted  
– check if the right deck was selected  
No sound  
Amplifier sound is distorted  
Play will not start  
– make sure that the CD recorder analog output is not connected to the  
amplifier Phono input  
– make sure that the label of the CD is facing up  
– clean the disc  
– make sure that the disc is not defective by trying another disc  
– check if the right deck was selected (in DJ mode)  
– finalize the disc first before playing it in the CD player deck  
– press CDR on the remote control and try again  
– point the remote control directly at the CD recorder  
– check the batteries and replace if necessary  
– select the right source first  
Remote control does not work  
Will not record  
– clean the disc  
– check if CDR(W) is an unfinalized disc (INITIALIZINGis diplayed when  
disc is unfinalized)  
– check that the disc is recordable and replace if necessary  
– the disc is not an AUDIO disc (WRONG DISC)  
– wrong input source chosen. Input label flashing (CHECK INPUT)  
– try using a Philips Audio CDR(W)  
Recording is distorted  
Recorder does not react  
DISC RECOVERon display  
– make sure the recording level is correctly adjusted  
– switch the ON/OFF button on the front of the recorder off and back on  
– a power failure has occurred during recording; the CD recorder is attempting  
to repair the disc  
DISC ERRORappears on the display  
– the disc cannot be recorded further, and cannot be finalized.  
– on a CDRW disc, the track being recorded is lost, but further recording and  
finalization can still be done  
Recorded tracks do not start or stop – check if there are at least 2.7 seconds silence in between the tracks  
at the correct time or tracks have  
been merged together  
START SOURCEindication  
(analog recording only)  
– insert track increments manually with the remote control (during recording)  
– start the synchronized external recording by pressing PLAY on the external  
source you wish to record from  
– check the connections  
– press STOP 9, select REC EXT MANand start the recording manually  
– select the right input with the SOURCE key  
30  
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 31  
Meet Philips at the Internet  
Printed in Hungary  
CLASS 1  
LASER PRODUCT  
3104 125 2419.1  
CMM/JS/0122  

Wolfgang Puck Coffeemaker Model BCM00020 User Manual
Toshiba Protege PT311U0F402V User Manual
Sony HBH 60 User Manual
Siemens AC75 User Manual
Samsung GT I9000M User Manual
Pioneer Premier DEH P790BT User Manual
Pioneer pdm 453 User Manual
Philips AZ1015 User Manual
Nutrimill 720300 User Manual
Nokia E5 00 User Manual