Allg. Genauigkeit (DC...300Hz) 1% v. Mw. 100/500mA
Verstärkungsdrift ....................... 0,1% v. Mw./°C
1. SICHERHEITSHINWEISE
2. EINLEITUNG
Die Stromsensoren CP 30, CP 330, CP 1100 und
CP 1800 wurden zur genauen, berührungslosen
Messung von AC- und DC-Strömen, sowie komplexen
Stromformen entworfen.
Die folgenden Symbole befinden sich auf dem Produkt:
Frequenzbereich........................ DC bis 20 kHz (-3dB)
3.2 Allgemeine Daten
Das Gerät darf nicht mit dem Hausmüll
entsorgt werden. Zur Entsorgung wenden
Sie sich bitte an geeignete Stellen.
Unter Verwendung neuester Halleffekt-Technologie
eignen sich die Stromsensoren zur exakten
Strommessung bis 30 A (CP 30), bis 450 A (CP 330), bis
1400 A (CP 1800), bzw. bis 1800 A (CP 1800).
Betriebsspannung...................... 300 V ACeff oder DC
Betriebstemperatur.................... 0°C bis +50°C
Lagertemperatur bei
Bedienungsanleitung
entfernter Batterie...................... -20°C to +85°C
Stromversorgung ....................... 9 V Alkaline battery
PP3, MN 1604
3-349-600-37
6/11.16
Folgende Messeigenschaften sind verfügbar:
CP 30
Achtung! Bedienungsanleitung beachten
°
°
°
°
AC- und DC-Strommessung
Hohe Genauigkeit
1 mA / 50 mA / 100 mA Auflösung
Autom. Abschalten
CP 330
CP 1100
CP 1800
oder IEC6LR61
Batterielebensdauer .................. 30 Stunden (typisch)
Ausgangsanschlüsse................. 1,5 m-Kabel mit 4mm-
Sicherheitsstecker
Doppelte/Verstärkte Isolierung
Das Anbringen an oder Entfernen von
STROMFÜHRENDEN Leitern ist möglich
Diese Eigenschaften machen es zum leistungsstarken
Instrument zur Messung an Umrichtern, getakteten
Schaltnetzteilen, industriellen Steuerungen und anderen
Anwendungen, die eine Strommessung oder Analyse der
Wellenform benötigen.
AC/DC Stromsensor
.
Leitergröße ................................ 25 mm Durchmesser
CP 1100, CP 1800..................... 32 mm Durchmesser
Gewicht...................................... 320 g
Abmessungen (H, B, T)............. 194 x 74 x 25 mm
CP 1100, CP1800...................... 200 x 74 x 25 mm
Erfüllt die Anforderungen der geltenden
europäischen Richtlinien
3. TECHNISCHE DATEN
Lesen Sie die Bedienungsanleitung vor
dem Gebrauch Ihres Gerätes sorgfältig
und vollständig. Beachten und befolgen
Sie diese in allen Punkten.
3.1 Elektrische Daten
(Alle Werte gelten bei 23°C 1°C)
CP 30 (Z201B)
Zur Vermeidung von elektrischem Schlag:
Messbereich.............................. 0 bis 30 A DC/ACpk
Strombereich............................. 30 A
Auflösung .................................. 1 mA
Überstromfähigkeit (60s) .......... 500 A
•
Vorsicht beim Anbringen und Verwenden dieses
Produktes; hohe Ströme und Spannungen können
am Messkreis anliegen.
Allg. Genauigkeit (DC...300Hz)
Verstärkungsdrift.......................
1% v. Mw. 2 mA
0,01% v. Mw./°C
•
Dieses Produkt darf nur von qualifiziertem Personal
verwendet werden, unter Einhaltung geeigneter
Schutzvorkehrungen.
Frequenzbereich....................... DC bis 20 kHz (-1dB)
•
•
Verwenden Sie dieses Produkt nicht, wenn es
beschädigt ist.
CP 330 (Z202B)
Messbereich.............................. 0 bis 450 A DC/ACpk
Strombereiche........................... 30 / 300 A
Auflösung .................................. 50 mA / 100 mA
Überstromfähigkeit (60s) .......... 600 A
Allg. Genauigkeit (DC...300Hz) 1% v. Mw. 50/100mA
Stellen Sie sicher, dass das Messgerät vom
stromführenden Leiter entfernt wurde, bevor Sie das
Batteriefach öffnen.
CP 330
CP 1800
•
Während der Messung dürfen Ihre Finger den
Schutzkragen nicht übergreifen, um eine gefährliche
Berührung mit dem Leiter zu verhindern (siehe Bild
1).
Verstärkungsdrift.......................
0,1% v. Mw./°C
Frequenzbereich....................... DC bis 20 kHz (-3dB)
Bezeichnung
Artikelnr.
CP 1100 (Z203B)
Messbereich.............................. 0 bis1400 A DC/ACpk
Strombereiche........................... 100 / 1000 A
Auflösung .................................. 100 mA / 500 mA
CP 30
Z201B
Z202B
Z203B
Z204A
CP 330
CP 1100
CP 1800
Überstromfähigkeit (60s) .......... 2000 A
Allg. Genauigkeit (DC...300Hz) 1% v. Mw. 100/500mA
Batterien sind im Lieferumfang enthalten.
Verstärkungsdrift.......................
0,1% v. Mw./°C
Frequenzbereich....................... DC bis 20 kHz (-3dB)
CP 1800 (Z204A)
Messbereich.............................. 0 bis1800 A DC/ACpk
Strombereiche........................... 125 / 1250 A
Auflösung .................................. 100 mA / 500 mA
Überstromfähigkeit (60s) .......... 2000 A
3-349-600-37 6/11.16
1_CP C
3.2 General data
1. SAFETY
2. INTRODUCTION
The CP 30, CP 330, CP 1100 and CP 1800 AC/DC
current probe have been designed for reliable and
accurate, non-intrusive measurement of AC, DC and
complex waveform currents.
Overall DC accuracy..................
1% of rdg
The following symbols appear on the products:
Working voltage......................... 300V ACRMS or DC
Operating temperature .............. 0°C to +50°C
Storage temperature with
Using advanced Hall Effect technology the CP 30,
CP 330 and CP 1100 can measure currents accurately
up to 30 Amps (CP 30), up to 450A (CP 330), up to 1400A
(CP 1100) and up to 1800A (CP 1800).
Do not dispose of this product as unsorted
municipal waste. Contact a qualified recycler for
Operating Instructions
battery removed......................... -20°C to +85°C
Power supply ............................. 9 V Alkaline battery
................................................... PP3, MN 1604
................................................... or IEC6LR61
Battery life.................................. 30 hours (typical)
Output connection: .................... 1.5m cable with 4mm
safety connectors
disposal
.
Measurement features include:
CP 30
°
°
°
°
AC and DC current measurement
High accuracy
1mA / 50mA / 100 mA Resolution
Auto Power Off
3-349-600-37
6/11.16
Attention! Refer to Manual
CP 330
CP 1100
CP 1800
Double/Reinforced Insulation
Conductor size........................... 25 mm diameter
CP 1100, CP 1800..................... 32 mm diameter
Weight........................................ 320 g
These features make it a powerful tool for use in inverters,
switch mode power supplies, industrial controllers and
other applications requiring current measurement and/or
waveform analysis.
AC/DC current probe
Dimensions (H, W, D)................ 194 x 74 x 25mm
CP 1100, CP 1800..................... 200 x 74 x 25mm
Application around and removal from
HAZARDOUS LIVE conductors is
permissible
3. SPECIFICATION
3.1 Electrical data
(All accuracies stated at 23°C 1°C)
Complies with the relevant European standards
CP 30 (Z201B)
Read the operating instructions completely
and carefully before placing your instrument
into service, and follow all instructions
contained therein.
Measuring range....................... 0 to 30A DC or ACpk
Current Range .......................... 30A
Resolution................................. 1mA
Overload capacity (60s)............ 500A
Basic accuracy (DC...300Hz) ...
Temperature Coefficient ...........
1% of rdg 2mA
To avoid electric shock:
0.01% of reading/°C
Frequency range....................... DC to 20kHz (-1dB)
•
•
Use caution during installation and use of this
product; high voltages and currents may be present
in circuit under test.
CP 330 (Z202B)
Measuring range....................... 0 to 450A DC or ACpk
Current Ranges......................... 30A / 300A
Resolution................................. 10mA / 100mA
Overload capacity (60s)............ 600A
This product must be used only by qualified
personnel practising applicable safety precautions.
•
•
Do not use product if damaged.
Basic accuracy (DC...300Hz) ... 1% of rdg 50/100mA
Frequency range....................... DC to 20kHz (-3dB)
Always ensure the probe is removed from any live
electrical circuit, before removing the battery cover.
CP 330
CP 1800
CP 1100 (Z203B)
•
Do not hold the probe anywhere beyond the tactile
barrier see FIG 1, in order to avoid dangerous
contact with the conductor.
Measuring range....................... 0 to 1400A DC, ACpk
Current Ranges......................... 100A / 1000A
Resolution................................. 100mA / 500mA
Overload capacity (60s)............ 2000A
Order Reference
Order No.
CP 30
Z201B
Z202B
Z203B
Z204A
Basic accuracy (DC...300Hz) ... 1% of rdg 100/500mA
Frequency range....................... DC to 20kHz (-3dB)
CP 330
CP 1100
CP 1800
CP 1800 (Z204A)
Measuring range....................... 0 to 1800A DC, ACpk
Current Ranges......................... 125A / 1250A
Resolution................................. 100mA / 500mA
Overload capacity (60s)............ 2000A
Battery is included.
Basic accuracy (DC...300Hz) ... 1% of rdg 100/500mA
Frequency range....................... DC to 20kHz (-3dB)
3-349-600-37 6/11.16
4. OPERATING INSTRUCTIONS
4.1 Switch On
5. SAFETY STANDARDS
No condition is made or to be implied nor is any
warranty given or to be implied as to the life or wear
of goods supplied or that they will be suitable for any
particular purpose or for use under specific
conditions, notwithstanding that such purpose or
conditions may be made known to the seller.
EN 61010-1
EN 61010-2-032
When the probe is switched on, the green LED will
illuminate. The LED starts flashing when the battery
voltage is too low for normal operation and warns the user
that it requires changing. This procedure is described in
Section 5.
2
5
1
3
300V Cat III Pollution Degree 2
7
PRODUCT SUPPORT
EMC Standards
4.2 Auto Zero
4
6
EN 61326-2-2
If required please contact:
The output zero offset voltage of the probe may change
due to thermal shifts and other environmental conditions.
To null the output voltage depress the Auto Zero button.
Ensure that the probe is away from the current carrying
conductor whilst the probe is being nulled.
ROHS and WEEE compliant
4
This product is designed to be safe under the
following conditions:
GMC-I Messtechnik GmbH
Product Support Hotline
- indoor use
- altitude up to 2000m
- temperature 0°C to +50°C
- maximum relative humidity 80% for
temperatures up to 31°C decreasing linearly
to 40% relative humidity at 50°C.
Phone:
Fax:
+49 911 86 02-0
+49 911 86 02-7 09
7
9
4.3 Current Measurement
Email:
8
Switch on the probe and check that the LED is lit.
Connect the output lead to an oscilloscope, multimeter or
other measuring equipment.
8
REPAIR AND REPLACEMENT PARTS
Zero the probe using the Auto Zero button.
Use of the probe on uninsulated conductors is
limited to 300V ACRMS or d.c. and frequencies
below 1kHz.
SERVICE DKD CALIBRATION CENTRE
AND RENTAL INSTRUMENT SERVICE
Clamp the jaws of the probe round the conductor
ensuring a good contact between the closing faces of the
jaws.
Safety in its use is the responsibility of the operator
who must be a suitably qualified or authorised
person. Ensure that your fingers are behind the
protective barrier see FIG 1 when using the
probe. Always inspect the probe for damage
before use.
If required please contact:
Observe and take measurements as required. Positive
output indicates that the current flow is in the direction
shown by the arrow on the probe.
GMC-I Service GmbH
Service Center
Thomas-Mann-Strasse 20
90471 Nürnberg, Germany
4.4 Auto Power OFF
In order to save battery life, the probe will automatically
switch itself off after approximately 10 minutes. To
disable the Auto power off function, Switch Off the probe
and Switch On whilst pressing the auto zero button. The
red LED will illuminate and the probe will stay On until
switched off again.
To avoid electric shock, keep the probe clean and
free of surface contamination.
Phone:
Fax:
E-mail:
+49 911 817718-0
+49 911 817718-253
FIG 1
Use Isopropyl alcohol to clean the probe.
This address is only valid in Germany. Please
contact our representatives or subsidiaries for
service in other countries.
1.
2.
3.
Jaws
6. WARRANTY
Conventional current direction
4.5 Battery Replacement
Your AC/DC current probe is guaranteed for two
years from the date of purchase against defective
material or workmanship. If the unit fails during
the warranty period, we shall at our discretion,
repair or replace it with a new or reconditioned
unit provided we are satisfied that the failure is
due to defective material or workmanship. To
make a claim under warranty, the probe should
be returned to us, postage prepaid, with a
description of the defect. The use of a battery or
external power supply, other than that specified
invalidates this warranty.
Safety zone delimiter (Tactile Barrier):
Do not reach beyond the safety collar!
SAFETY WARNING
Before removing the battery cover,
make sure that the probe is remote
from any live electrical circuit.
4.
5.
6.
7.
8.
9.
Battery cover
CP30_CP330_CP1100 English Rev 1.4
Battery cover screw
Jaw trigger
The green or red LED will flash when the minimum
operating voltage is approached. Refer to Fig.1. Use the
following procedure.
ON/OFF / Range switch
Auto zero button
LED
Unclamp the probe from the conductor, turn it off using
the On - Off switch and disconnect the output leads, from
external equipment.
Goods alleged by the buyer to be defective
shall not form the subject of any claim for
injury, loss, damage, or any expense
howsoever incurred whether arising directly or
indirectly from such alleged defects other than
death or personal injury resulting from the
seller‘s negligence.
Loosen the captive screw which secures the battery
cover. Lift the cover through 30° and pull it clear of the
probe body as shown in Fig 1. Replace the battery and
re-fit the battery cover and fasten the screw.
Fit only Type 9 V PP3 Alkaline (MN 1604).
3-349-600-37 6/11.16
3-349-600-37 6/11.16
|