Nokia 3155i User Manual

User guide  
Nokia 3155i User Guide  
1
LEGAL INFORMATION  
PART NO. 9241731, ISSUE NO. 1  
Copyright © 2006 Nokia. All rights reserved.  
Nokia, Nokia Connecting People, Nokia 3155i, Pop-Port™, and the Nokia Original Enhancements  
logos are trademarks or registered trademarks of Nokia Corporation. Other company and  
product names mentioned herein may be trademarks or trade names of their respective owners.  
US Patent No. 5818437 and other pending patents. T9 text input software  
Copyright © 1999-2006. Tegic Communications, Inc. All rights reserved. This device may  
contain commodities, technology, or software subject to export laws and regulations from  
the US and other countries. Diversion contrary to law is prohibited.  
Includes RSA BSAFE cryptographic or security protocol software from RSA Security.  
Java™ is a trademark of Sun Microsystems, Inc.  
The information contained in this user guide was written for the Nokia 3155i product. Nokia  
operates a policy of ongoing development. Nokia reserves the right to make changes to any  
of the products described in this document without prior notice.  
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR  
INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES  
HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS  
REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND  
RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS  
DOCUMENT OR WITHDRAW IT AT ANYTIME WITHOUT PRIOR NOTICE.  
Export Controls  
This device may contain commodities, technology, or software subject to export laws and  
regulations from the U.S. and other countries. Diversion contrary to law is prohibited.  
FCC/Industry Canada Notice  
Your device may cause TV or radio interference (for example, when using a telephone in close  
proximity to receiving equipment). The FCC or Industry Canada can require you to stop using  
your telephone if such interference cannot be eliminated. If you require assistance, contact your  
local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the  
condition that this device does not cause harmful interference. Any changes or modifications  
not expressly approved by Nokia could void the user’s authority to operate this equipment.  
2
C o n t e n t s  
Contents  
For your safety....................................................................................................... 4  
Welcome.................................................................................................................. 7  
1. Phone at a glance.......................................................................................... 9  
2. Set up your phone....................................................................................... 14  
3. Text entry....................................................................................................... 21  
4. My account.................................................................................................... 23  
5. Call history..................................................................................................... 24  
6. Messages........................................................................................................ 26  
7. Contacts......................................................................................................... 34  
8. My stuff.......................................................................................................... 40  
9. Tunes............................................................................................................... 42  
10. Settings........................................................................................................... 45  
11. Tools ................................................................................................................ 60  
12. VXL................................................................................................................... 69  
13. Enhancements.............................................................................................. 71  
14. Care and maintenance............................................................................... 75  
15. Additional safety information.................................................................. 76  
Index........................................................................................................................81  
3
F o r y o u r s a f e t y  
For your safety  
Read these simple guidelines. Not following them may be dangerous or illegal.  
Read the complete user guide for further information.  
SWITCH ON SAFELY  
Do not switch the phone on when wireless phone use is prohibited or  
when it may cause interference or danger.  
ROAD SAFETY COMES FIRST  
Obey all local laws. Always keep your hands free to operate the vehicle  
while driving. Your first consideration while driving should be road safety.  
INTERFERENCE  
All wireless phones may be susceptible to interference, which could  
affect performance.  
SWITCH OFF IN HOSPITALS  
Follow any restrictions. Switch the phone off near medical equipment.  
SWITCH OFF IN AIRCRAFT  
Follow any restrictions. Wireless devices can cause interference  
in aircraft.  
SWITCH OFF WHEN REFUELING  
Do not use the phone at a refueling point. Do not use near fuel or  
chemicals.  
SWITCH OFF NEAR BLASTING  
Follow any restrictions. Do not use the phone where blasting is  
in progress.  
USE SENSIBLY  
Use only in the normal position as explained in the product  
documentation. Do not touch the antenna unnecessarily.  
QUALIFIED SERVICE  
Only qualified personnel may install or repair this product.  
ENHANCEMENTS AND BATTERIES  
Use only approved enhancements and batteries. Do not connect  
incompatible products.  
WATER-RESISTANCE  
Your phone is not water-resistant. Keep it dry.  
4
 
F o r y o u r s a f e t y  
BACK-UP COPIES  
Remember to make back-up copies or keep a written record of all  
important information stored in your phone.  
CONNECTING TO OTHER DEVICES  
When connecting to any other device, read its user guide for detailed  
safety instructions. Do not connect incompatible products.  
EMERGENCY CALLS  
Ensure the device is switched on and in service. Press the end key as  
many times as needed to clear the display and return to the start screen.  
Enter the emergency number, then press the call key. Give your  
location. Do not end the call until given permission to do so.  
About your device  
The wireless device described in this guide is approved for use on the CDMA 800  
and 1900, AMPS, and GPS networks. Contact Virgin Mobile for more information  
about networks.  
When using the features in this device, obey all laws and respect privacy and the  
legitimate rights of others.  
Warning: To use any features in this device, other than the alarm clock,  
the device must be switched on. Do not switch the device on when  
wireless phone use may cause interference or danger.  
Network services  
To use the phone you must have service from Virgin Mobile. Many of the features  
in this device depend on features in the wireless network to function. These network  
services may not be available on all networks or you may have to make specific  
arrangements with Virgin Mobile before you can utilize network services. Virgin  
Mobile may need to give you additional instructions for their use and explain  
what charges will apply. Some networks may have limitations that affect how  
you can use network services. For instance, some networks may not support all  
language-dependent characters and services.  
Virgin Mobile may have requested that certain features be disabled or not activated  
in your device. If so, they will not appear on your device menu. Your device may  
also have been specially configured. This configuration may include changes in menu  
names, menu order, and icons. Contact your service provider for more information.  
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP  
protocols. Some feature of this device, such as VXL, require network support  
for these technologies.  
5
   
F o r y o u r s a f e t y  
Shared memory  
This device has 12 MB of internal memory. The following features in this device may  
share memory: contacts; text messages; photos, images, tones, and applications  
in My Stuff; calendar notes; and games. Use of one or more of these features may  
reduce the memory available for the remaining features sharing memory. Your  
device may display a message that the memory is full when you try to use a shared  
memory feature. In this case, delete some of the information or entries stored in  
the shared memory features before continuing. Some of the features, such as  
photos, images, tones, and applications in My Stuff; and text messages may have  
a certain amount of memory specially allotted to them in addition to the memory  
shared with other features.  
6
 
W e l c o m e  
Welcome  
Congratulations on your purchase of the Nokia 3155i mobile phone. Your phone  
provides many practical functions for daily use, such as a hands-free loudspeaker,  
alarm clock, calculator, calendar, and more. Your phone can also connect to a PC,  
laptop, or other device using a data cable. To personalize your phone, you can set  
your favorite ring tones.  
Getting help  
Find your phone label  
If you need help, Nokia Customer  
Care is available for assistance.  
Before calling, we recommend  
that you write down the following  
information and have it available:  
Electronic serial number (ESN)  
Your postal code  
The ESN is found on the type label, which is located beneath the battery on the  
back of the phone. See "Remove the back cover," p. 15 and "Remove the battery,"  
p. 15.  
Contact Nokia  
Please have your product with you when contacting any of these numbers:  
Customer Care Contact Center, Canada  
Nokia Products Ltd.  
601 Westney Road South  
Ajax, Ontario L1S 4N7  
Tel: 1-888-22-NOKIA (1-888-226-6542)  
In USA call 1-888-Nokia2U (1-888-665-4228)  
7
           
W e l c o m e  
Updates  
From time to time, Nokia updates this guide to reflect changes. The latest version  
of this guide and an interactive tutorial for this product may be available at  
Check www.nokia.ca for additional information, downloads, and services related  
to the use of Nokia products and services.  
Accessibility solutions  
Nokia is committed to making mobile phones easy to use for all individuals,  
including those with disabilities. For more information visit  
8
   
P h o n e a t  
a
g l a n c e  
1. Phone at a glance  
Earpiece port (1)  
Display screen (2)  
Left selection key (3)  
Call key (4)  
Keypad (5)  
Four-way scroll and selection key (6)  
Right selection key (7)  
Power key/end key (8)  
Charger port (9)  
Pop-Port™ connector (10)  
Microphone (11)  
Keys and parts  
Loudspeaker (1)  
Voice key (2): Press to answer incoming  
call or start voice recorder while in  
idle state.  
Volume key (3)  
Front display (4)  
Headset jack (5)  
You can use the voice key to answer an incoming call.  
9
     
P h o n e a t  
a
g l a n c e  
Standby mode  
The standby mode is home base and indicates your phone is in the idle state.  
Signal strength (1)—A higher bar indicates a stronger network signal.  
Menu (2)—Press the center selection key to select this option.  
Go to (3)—Press the left selection key to select this option.  
Names (4)—Press the right selection key to select this option.  
Battery level (5)—A higher bar indicates more power in the battery.  
Softkeys  
Depending on your wireless service provider and the model number of your  
phone, some or all of the following softkeys may appear in the standby mode.  
In the standby mode, the four-way scroll key instantly takes you to the following  
frequently accessed menus:  
Scroll left key—Text message  
Scroll right key—VXL  
Scroll up key—My Account  
Scroll down key—Contacts  
Center selection key—Main menu or a selected submenu  
Indicators and icons  
Depending on your wireless service provider and the model number of your  
phone, some or all of the following indicators and icons may appear in the  
standby mode.  
You have new text message. See "Text messages," p. 26.  
You have new voice messages. See "Voice messages," p. 31.  
Your phone keypad is locked. See "Keyguard," p. 20.  
Your phone is set to the silent profile. See "Profiles," p. 45.  
The alarm clock is set to on. See "Alarm clock," p. 60.  
The countdown timer is running.  
The stopwatch timer is running in the background. See "Stopwatch,"  
p. 67.  
Integrated hands-free is active. See "The loudspeaker," p. 19.  
10  
     
P h o n e a t  
The timed profile is selected. See "Profiles," p. 45.  
a
g l a n c e  
or  
An enhancement is connected to the phone.  
See "Enhancements," p. 71.  
Voice privacy encryption is active (or is not active) in the network.  
or  
Location info sharing is set to emergency or on.  
See "Location info sharing," p. 48.  
Vibrating alert is active. See "Profiles," p. 45.  
or  
Off hook, call or data call in progress.  
You are in a digital network. See "Network services," p. 5.  
You are in an analog network. See "Network services," p. 5.  
You are roaming outside your home network. See "Roaming options,"  
p. 58.  
Phone menus  
Phone features are grouped according to function and are accessed through the  
main menus. Each main menu contains submenus and lists from which you can  
select or view items and customize your phone features. To access these menus  
and submenus, use the scroll method or a shortcut.  
You can change your menu view from list to grid. Select Menu > Options > Main  
menu view > List or Grid.  
Note: Some features may not be available, depending on your network.  
For more information, contact your wireless service provider.  
Scroll method  
You can use the four-way scroll key to scroll up, down, left, and  
right through the options.  
1. In the standby mode, select Menu, and scroll through the main  
menus using the scroll key.  
As you scroll through the menus, the menu number appears in the upper right  
corner of the display. Below the battery level indicator is a scroll bar with a  
tab that moves up or down on the right side of the display screen as you scroll  
through the menus, providing a visual representation of your current position  
in the menu structure.  
11  
   
P h o n e a t  
a
g l a n c e  
2. When you arrive at a menu, press the center selection key to select submenus.  
Select Back (the right selection key) to return to the previous menu.  
Press the end key to return to the standby mode from any menu or submenu.  
In-phone help  
Many features have brief descriptions (help text) you can view on the display.  
To view these descriptions, you must first activate help text as follows.  
In the standby mode, select Menu > Settings > Phone > Help text activation >  
On or Off.  
Scroll to a feature and wait about 14 seconds. Scroll down to view all of the  
description, or select Back to exit.  
Security feature  
The security feature protects your device from unauthorized outgoing calls or  
access to the stored information with the lock and security codes. The lock code  
is a four digit number while the security code is five digits. By default, the  
security feature uses the lock code to protect your phone (defaulted to the last  
four digits of your phone number) instead of the security code.  
You need to enter the lock code to access the following Security option:  
1. In the standby mode, select Menu > Settings > Security.  
2. Enter the lock code, and select OK. See "Security," p. 55.  
Note: The preset lock code is set to 0000 or the last four digits of your  
phone number. If it does not work, contact your wireless service provider  
for help.  
Your device, by default, requires you to enter the lock code to restore  
factory settings:  
1. In the standby mode, select Menu > Settings > Restore settings.  
2. Enter the lock code, and select OK. See "Change lock code," p. 56.  
Go to functions  
In the standby mode, the left softkey Go to function provides you with a shortcut  
to functions such as: Alarm clock, Calculator, Calendar, Inbox, Meeting, My Stuff,  
Names, Normal, Outdoor, Radio, Ringing volume, Silent, Stopwatch, and Vibrating  
alert. With this application, you can quickly access your most frequently used  
functions from the Go to menu.  
12  
   
P h o n e a t  
a
g l a n c e  
Choose or remove Go to functions  
You can choose the functions you want listed under Go to.  
1. In the standby mode, select Go to > Options > Select options.  
2. Scroll up or down to highlight the desired function.  
3. Select Mark to add a function or Unmark to remove a function.  
4. Select Done when you have added all desired functions.  
5. Select Yes to save the changes.  
6. In the standby mode, select Go to to display a list of the functions you  
selected in step 2.  
Organize functions  
You can organize the functions you have chosen for Go to.  
1. In the standby mode, select Go to > Options > Organize.  
2. Scroll up or down to highlight the function you want to rearrange, and select  
Move > Move up, Move down, Move to top, or Move to bottom.  
3. Select Done > Yes to save the changes.  
13  
 
S e t u p y o u r p h o n e  
2. Set up your phone  
Antenna  
Your device has two antennas: the fixed antenna is active unless  
the extendable antenna is fully extended.  
In the Nokia 3155i phone, the GPS antenna is internal and is  
activated when placing emergency calls or when On is selected  
from the Location info sharing menu (a carrier-dependent  
feature). See "Location info sharing," p. 48.  
Your device has a fixed and extendable antenna located  
towards the top of the phone with the fold closed. Hold the  
phone with the antenna area pointed up and over your  
shoulder.  
Note: As with any other radio transmitting device,  
do not touch the antenna unnecessarily when the  
device is switched on. Contact with the antenna  
affects call quality and may cause the device to  
operate at a higher power level than otherwise  
needed. Avoiding contact with the antenna area  
while operating the device optimizes the antenna  
performance and the battery life.  
14  
     
S e t u p y o u r p h o n e  
Change the battery  
Note: Always switch the device off, and disconnect the charger and any  
other device before removing the cover or the battery. Avoid touching  
electronic components while changing the cover or the battery.  
Always store and use the device with the cover attached.  
Warning: Use only batteries, chargers, and enhancements approved by  
Nokia for use with this particular model. The use of any other types may  
invalidate any approval or warranty and may be dangerous.  
Remove the back cover  
1. With the back of the phone  
facing you, push down on the  
back cover.  
2. Slide the back cover toward  
the bottom of the phone and  
remove.  
Remove the battery  
After you have removed the back  
cover, insert your finger into the  
finger grip, and lift the battery  
from its compartment.  
Note: Always switch off the device, and disconnect the charger before  
removing the battery.  
UIM card slot  
Your phone has a UIM (CDMA SIM) card slot  
built into the mechanics. However, the UIM  
is not functional in this phone model. Avoid  
placing anything into the UIM card slot.  
15  
       
S e t u p y o u r p h o n e  
Replace the battery  
1. Insert the battery,  
gold colored contact  
end first, into the  
battery slot.  
2. Push down on the other  
end ofthe battery to snap  
the battery into place.  
Replace the back  
cover  
1. Set the back cover on the  
phone with the cover tabs  
aligned with the slots in  
the phone.  
2. Slide the back cover  
toward the top of the  
phone until the back cover is securely in place.  
Charge the battery  
Note: Check the model number of any charger before use with this  
device. This device is intended for use when supplied with power from  
the AC-3 or AC-4 charger.  
1. Plug the charger transformer into a standard ac outlet.  
2. Insert the charger output  
plug into the round jack  
at the bottom end of  
the phone.  
After a few seconds, the  
battery indicator in the  
display starts to scroll  
from bottom to top. If  
the battery is completely  
discharged, it may take a few minutes before the charging indicator appears  
on the display or before any calls can be made.  
When you disconnect the power cord of any enhancement, grasp and pull the  
plug, not the cord.  
16  
       
S e t u p y o u r p h o n e  
Turn your phone on or off  
1. To turn your phone on or off, press and hold the end key for at least 4 seconds.  
2. Enter the lock code, if necessary, and select OK. See "Change lock code," p. 56.  
Warning: Do not switch the phone on when wireless phone use is  
prohibited or when it may cause interference or danger.  
Connect the headset  
A compatible headset, such as HS-5 or HS-9, may be purchased with your phone,  
or separately as an enhancement. See "Enhancements," p. 71.  
1. Plug the HS-5 headset connector into  
the Pop-Port connector at the bottom  
end of your phone or, plug the HS-9  
headset connector into the 2.5 mm  
headset jack located on the side of  
your phone to allow hands-free  
operation.  
appears in the standby mode.  
2. Position the headset on your ear.  
With the headset connected, you can  
make, answer, and end calls as usual.  
Use the keypad to enter numbers.  
Press the call key to place a call.  
See "Phone at a glance," p. 9.  
Press the end key to end a call.  
Make a call  
Note: Before making or receiving a call, fully extend the whip antenna.  
Keypad  
1. Enter the phone number (including the area code), and press the call key.  
(To delete a character to the left of the cursor, select Clear.)  
2. Press the end key to end the call, or select End call to cancel the call attempt.  
17  
     
S e t u p y o u r p h o n e  
Contacts list  
1. In the standby mode, scroll down to display your contacts list and highlight  
your desired entry.  
2. Select Details to highlight your desired number, then Call.  
Last outgoing number  
1. In the standby mode, press the call key to display the last 30 numbers dialed.  
2. Scroll to the number (or name) you want to redial, and press the call key.  
Conference calling  
Conference calling is a network service that allows you to take part in a  
conference call with two other participants.  
1. Make a call to the first participant.  
2. With the first participant on the line, select Options > New call.  
3. Enter the phone number of the second participant, or select Search to  
retrieve a number from the contacts list. Select Call. The first participant  
is put on hold.  
4. When the second participant picks up, press the call key to connect the calls.  
5. To end the conference call, select Options > End all calls, or press the end key.  
Answer calls  
Incoming calls  
1. With the fold open, press the call key, or select Answer to answer the call.  
2. Press the end key to reject the call.  
Select Silence to mute the ringtone, then Dismiss, or do nothing. The call is  
eventually diverted to voicemail.  
With your phone set to silent in the profiles menu, select Dismiss to divert the  
call to voicemail.  
3. With the fold closed, press the volume key to mute the ringtone.  
A short press of the voice key answers an incoming call with the loudspeaker.  
By default, your phone answers an incoming call when you open the fold. You can  
change the setting to not answer the call when the fold opens.  
In the standby mode, select Menu > Settings > Call > Answer when fold is  
opened > On or Off.  
18  
   
S e t u p y o u r p h o n e  
Adjust the earpiece volume  
Whether in or out of a call, you can scroll the volume key up or down to adjust  
the volume of the earpiece. When you adjust the volume, a bar chart indicates  
the volume level.  
Answer with locked keypad  
To answer a call with the keypad locked, press the call key with the fold open.  
To answer a call with the fold closed and the keypad locked, press and hold the  
voice key to answer with the loudspeaker. During the call, all features function  
as normal. When you end or reject the call, the keypad automatically re-locks.  
See "Keyguard," p. 20.  
When the keypad lock is on, calls still may be possible to the official emergency  
number programmed into your device. Enter the emergency number, and press  
the call key.  
The loudspeaker  
You can use your phone as a loudspeaker during a call.  
Warning: Do not hold the device near your ear when the loudspeaker is  
in use, because the volume may be extremely loud.  
To activate the loudspeaker while in a call with the fold open, select Loudsp..  
To activate the loudspeaker when answering a call with the fold closed, press  
the voice key.  
To deactivate the loudspeaker during a call, with the fold open, select Normal.  
The loudspeaker is deactivated automatically when a call (or a call attempt) ends  
or when certain enhancements are connected.  
Options during a call  
Many of the options you can use during a call are network services. Check with  
your wireless service provider for more information.  
1. Select Options during a call to display the following options:  
Loudspeaker or Handset—Activate or deactivate the loudspeaker while in a call.  
New call—Initiate a conference call. See "Conference calling," p. 18.  
Save—Save a number while in a call to your contacts list. This option is  
available only when entering numbers during a call.  
19  
       
S e t u p y o u r p h o n e  
Add to contact—Add a phone number to an existing contact in your contacts  
list while in a call. This option is available only when entering numbers during  
a call.  
End all calls—Disconnect from all active calls.  
Touch tones—Enter the numbers, and select Tones to send the numbers  
as tones.  
Contacts—View the contacts menu.  
Menu—View the phone menu.  
2. Scroll to and select an option to activate the option or enter its submenu.  
Keyguard  
With keyguard, you can lock the keypad to prevent keys from being pressed  
accidentally. The locked keypad unlocks when you receive a call. After the call,  
the lock automatically reactivates.  
With the keyguard on, calls may be possible to the official emergency number  
programmed into your phone. Enter the emergency number, and press the call key.  
Lock the keypad  
In the standby mode, select Menu with the center selection key; then press *  
within 2 seconds.  
Unlock the keypad  
Select Unlock with the center selection key; then press * within 2 seconds.  
20  
       
T e x t e n t r y  
3. Text entry  
You can use two methods for entering text and numbers — standard mode and  
predictive text mode.  
Select Clear to backspace the cursor and delete a character.  
Select and hold Clear to backspace continuously and delete multiple characters.  
Standard mode  
Standard mode is the only way to enter text into the contacts list and to rename  
caller groups.  
Text (Abc)  
Press a key once to insert the first letter on the key and twice for the second  
letter, etc. If you pause briefly, the last letter in the display is accepted and your  
device awaits the next entry.  
Press 0 to enter a space and accept a completed word.  
Press 1 to insert a period into your message.  
Press and hold * to display a complete list of special characters.  
Press and hold # to switch between letters and numbers.  
Numbers (123)  
To switch from Abc mode to 123 mode, press and hold # at any message  
entry screen.  
Punctuation and special characters  
While at any text entry screen, press * to display special characters (press and hold *  
if predictive text is on). Press * again to cycle through all available characters. To  
navigate through the list of special characters, use the scroll keys. Once a character  
is highlighted, select Insert to insert the character into your message.  
Predictive text mode  
To write messages quickly, use predictive text mode with your keypad and the  
built-in dictionary. Predictive text mode is much faster than the standard mode  
method because you do not need to scroll through the letters on each key to spell a  
word. The dictionary determines which word to enter based on the keys selected.  
21  
       
T e x t e n t r y  
Language selection and activation  
You can select the language that predictive text uses. At any text entry screen,  
select Options > Writing language > English or Français. To activate predictive  
text, at any text entry screen, select Options > Dictionary on.  
Text entry  
The illustration below simulates your display each time a key is pressed. For  
example, to write ’Nokia’ with predictive text on and the English dictionary  
selected, press each of the following keys:  
6
6
5
4
2
Press 0 to enter a space, and begin writing the next word.  
If a displayed word is not correct, press * to see other matches. To return to  
the previous word in the list of matches, select Prev..  
If ? appears after a word, select Spell to enter the word with the standard  
mode, and add the word to the dictionary.  
Press 1 to insert a period into your message.  
Press and hold * to display special characters. Press * again to cycle through  
all available characters.  
Change case and mode  
Press # to switch between uppercase, lowercase, and sentence case text and  
between standard and predictive text mode. Case and mode are indicated by the  
icons that appear in the upper left of the display screen, as follows:  
Uppercase text: standard mode is on.  
Lowercase text: standard mode is on.  
Sentence case text: standard mode is on. This option is available  
only at the beginning of a sentence.  
Uppercase text: predictive text is on.  
Lowercase text: predictive text is on.  
Sentence case text: predictive text is on. This option is available  
only at the beginning of a sentence.  
22  
   
M y a c c o u n t  
4. My account  
You can access your Virgin Mobile account to check or increase your balance.  
To access your account, select Menu > My Account.  
23  
   
C a l l h i s t o r y  
5. Call history  
Call history stores information about your last 30 missed, incoming, and  
outgoing calls. When the number of calls exceeds the maximum, the most  
recent call replaces the oldest.  
Whether viewing missed, incoming, or outgoing calls, select from the  
following options:  
Time of call—Displays the date and time of the call.  
Send message—Sends a message to the number.  
Use number—Edits the number and associates a name with the number.  
Save—Enters a name for the number and saves it to your contacts list.  
Add to contact—Adds a number to a contact and saves it to your contacts list  
(available only with numbers not yet stored in your contacts list).  
Delete—Clears the number from memory.  
Call—Calls the number.  
Note: You cannot make calls from Call History to entries identified  
as restricted.  
View missed calls  
The missed calls feature does not function with your device switched off. Missed  
calls are calls you have never answered. To view missed calls, do the following:  
1. In the standby mode, select Menu > Call History > Missed calls; or, when the  
missed call notification is displayed, select List.  
2. Scroll to a name or number, and select Options and one of the options listed  
to view or activate.  
View incoming calls  
Incoming calls are calls that have been answered.  
1. In the standby mode, select Menu > Call History > Incoming calls.  
2. Scroll to a name or number, and select Options and one of the options listed  
to view or activate.  
24  
       
C a l l h i s t o r y  
View outgoing calls  
Outgoing calls are previous numbers you have dialed from your device:  
1. In the standby mode, press the call key; or select Menu > Call History >  
Outgoing calls.  
2. Scroll to a name or number, and select Options and one of the options listed  
to view or activate.  
View call times  
You can make or receive calls to or from the same number and view up to five  
calls displayed with the time each call occurred. Your device clock must be set for  
this feature to work accurately.  
1. In the standby mode, select Menu > Call History > Missed calls, Incoming  
calls, or Outgoing calls.  
2. Highlight your desired name or number, and select Options > Time of call.  
3. Scroll down to view the call times from this number; select Back to return to  
the options list.  
Delete recent call list  
You can delete any missed, outgoing, or incoming calls from your device memory.  
1. In the standby mode, select Menu > Call History > Clear Call History.  
2. Select the call type you want to clear: All, Missed, Incoming calls, or  
Outgoing calls.  
Save phone number from call history  
Your phone can store up to 500 contact entries and each contact entry can store up  
to 5 phone numbers. To save a phone number from Call History do the following:  
1. Select the Call History entry.  
2. Select a number and Options > Save.  
3. Type in the new entry name, and select OK.  
Note: You cannot save phone numbers from calls identified  
as restricted.  
25  
     
M e s s a g e s  
6. Messages  
If you have subscribed to a message network service, you can send and receive  
messages to compatible phones also subscribed to a message service. You can make  
distribution lists that contain phone numbers and names from your contacts list.  
When composing text messages, check the number of characters allowed in the  
top right corner of the message. Using Unicode characters takes up more space.  
With Unicode characters in your message, the indicator may not show the message  
length correctly. Before sending the message, the phone tells you if the message  
exceeds the maximum length allowed for one message.  
Important: Exercise caution when opening messages. Messages may  
contain malicious software or be otherwise harmful to your device or PC.  
Note: When you send a message, your device may display Message sent.  
This is an indication that the message has been sent by your device to the  
message center number programmed into your device. This is not an  
indication that the message has been received at the intended destination.  
For more details about messaging services, check with your service provider.  
Text messages  
Write and send  
1. In the standby mode, select Menu > Messages > Text messages >  
Create message.  
To go quickly to Create message, scroll left in the standby mode.  
2. Compose and send a message using the keypad.  
Depending on the messaging service enabled, some or all of the following  
options are available while composing your message:  
Sending optionsMark or Unmark the sending options of a single message as  
Urgent, Callback no., or Signature. See "Change sending options," p. 30.  
Clear text—Erase all the text from the message editor.  
Insert contact—Insert a name from your contacts list into your message.  
Insert number—Insert a phone number or find a phone number in the  
contacts list.  
Save—Select Drafts to save the message in the drafts folder. Select Templates to  
save the message as one of your predefined templates in the templates folder.  
26  
         
M e s s a g e s  
Exit editor—Exits the message editor.  
Use template—Insert a predefined template into your message.  
Insert smiley—Insert a smiley into your message.  
Insert word—Enter a word and insert it into your message. This option is  
available if predictive text is turned on.  
Insert symbol—Insert a special character into your message. This option is  
available if predictive text is turned on.  
Writing language—Choose the language you want to use.  
Dictionary on or Dictionary off—Turn the predictive text on or off.  
3. To send the message, select Send to > Send to number, Send to e-mail, Send to  
many, or Send to distrib. list (if a distribution list has been created). Enter the  
recipient’s phone number or e-mail, or select Search to retrieve a number from  
your contacts list; select OK.  
Read message  
When you receive a message, a notification message and  
are displayed.  
1. Select Show to read the message or Exit to dismiss the notification and read  
the message later from your inbox. See "View saved messages," p. 28.  
2. Scroll up or down to view the whole message, if necessary.  
Reply to message  
1. In the standby mode, select Menu > Messages > Text messages > Inbox and  
your desired message, or when you receive a message, select Show.  
2. Select Reply > Empty screen, Original text, Template, or one of the predefined  
answers. Compose your reply using the keypad.  
3. After creating the reply, select Send. The sender’s phone number or e-mail is  
used as the default.  
Canned messages  
Canned messages or templates are short, prewritten messages you can recall  
and insert into new text messages when you are short on time. See "Canned  
messages," p. 27.  
1. In the standby mode, select Menu > Messages > Text messages > Create  
message > Options > Use template.  
27  
       
M e s s a g e s  
2. Select your desired template.  
3. Select Send to > Send to number, Send to many, Send to e-mail, or Send to  
distrib. list (if a distribution list is created).  
4. Enter the recipient’s phone number or e-mail, or select Search to retrieve a  
number from your contacts list; select Send.  
The following canned messages are available:  
Where u at?  
What up?  
B there soon  
Tipsy?  
I’m gonna b late  
What’s the 411?  
R u up 4 it?  
U know u want me  
Let’s jet  
Whatever  
Message folders  
Save messages  
You can save drafts of messages or received messages to an existing folder or to a  
folder that you have created.  
1. Open the received message or create a new message, and select Options.  
2. To save a received message, select Move > Archive, Templates, or a folder you  
have created.  
3. To save the draft of a message you have created, select Save > Drafts  
or Templates.  
View saved messages  
1. In the standby mode, select Menu > Messages > Text messages.  
2. Select the folder that contains the message you want to view:  
Inbox—Automatically stores any incoming messages  
Outbox—Stores messages that have not been sent  
Sent items—Stores messages that have been sent  
28  
   
M e s s a g e s  
Drafts—Stores messages created as drafts  
Archive—Stores messages that you choose to archive, including unread ones  
Templates—Stores prewritten templates. Preloaded templates can be edited  
and customized.  
My folders—Allows you to organize your messages by creating custom folders  
and saving some of your messages here. Select Add folder to add a custom  
folder, or rename or delete a folder you have created.  
You can only delete folders created in my folders; the inbox, sent items,  
archive, and templates folders are protected. When deleting a folder, you  
are also deleting all messages in the folder.  
Distribution lists—Stores created distribution lists.  
3. When the folder opens, select the message you want to view.  
Distribution list  
The distribution list enables you to send messages to a group of contacts. In the  
standby mode, select Menu > Messages > Text messages > Distribution lists.  
To create a distribution list, select New list with no list created or Options >  
Create new list to create additional lists. To populate your list, select Add new  
and a contact from your contacts list.  
To use, rename, or modify a distribution list, highlight the distribution list, and  
select Options > Send message, Rename list, Clear list, or Delete list.  
A distribution list only contains phone numbers of recipients and is selected from  
a list of predefined groups you create.  
Delete messages  
If your message memory is full and you have more messages waiting at the  
network, No space for new text messages appears in the standby mode. You can  
do the following:  
Read some of the unread messages, and delete them individually.  
Delete messages from some of your folders.  
Delete a single message  
1. In the standby mode, select Menu > Messages > Text messages.  
2. Select the folder containing the message you want to delete.  
3. Highlight the message you want to delete.  
29  
   
M e s s a g e s  
4. Select Options > Delete.  
5. Select Yes to delete the message or No to exit.  
Delete messages in a folder  
1. In the standby mode, select Menu > Messages > Text messages >  
Delete messages.  
2. Select the messages you want to delete:  
All—Deletes all messages in all of the folders  
All read—Deletes any messages that have been read in all of the folders  
All unread—Deletes any messages that have not been read in all of the folders  
3. Select and Mark the folders that have messages you want to delete:  
Inbox—Deletes all messages from the inbox folder  
Sent items—Deletes all messages from the Sent items folder  
Outbox—Deletes all messages from the outbox folder  
Drafts—Deletes all messages from the drafts folder  
Archive—Deletes all messages from the archive folder  
User defined folders—Deletes all messages from the user defined folder  
4. Select Done > Yes to empty the marked folder.  
Message settings  
Change sending options  
To change sending options for all future text messages, in the standby mode,  
select Menu > Messages > Text messages > Message settings > Sending options  
and the setting you want to change:  
Priority—Set the priority of the note as Normal or Urgent.  
Send callback number—Send a callback number to the recipient. Select Off  
or enter your desired phone number to send to the recipient as a callback  
number, and select OK.  
Signature—Select On to create a signature to send with text messages or Off  
to turn this feature off.  
To change sending options for one message, in the standby mode, select Menu >  
Messages > Text messages > Create message > Options > Sending options, and  
Mark or Unmark the setting you want to change:  
Urgent—Set the priority of the note as Urgent.  
30  
   
M e s s a g e s  
Callback no.—Enter your desired phone number to send to the recipient as a  
callback number, and select OK.  
Signature—Create a signature to send with text messages.  
Change message settings  
You can change the settings of a message. In the standby mode, select Menu >  
Messages > Text messages > Message settings > Settings and the setting you  
want to change:  
Message font size—Select Small font or Large font.  
Message overwriting—To determine how and whether messages will be  
automatically overwritten when the message memory is full, select Sent items  
only, Inbox only, S. items & Inbox, or Off.  
Note: When the message memory is full, your phone cannot send or  
receive any new messages. To free up the memory, you can select  
Message overwriting to make your phone automatically replace old  
messages in the inbox and outbox folders when new ones arrive.  
Save sent messages > Always save, Always prompt, or Off.  
Queue msgs. when digital unavailable > On, On prompt, or Off—To store in outbox  
messages that can be sent later when digital service is available.  
Incoming msg. display > Message view or Msg. alert—To determine how received  
messages will be displayed in standby mode. Select Message view to show the  
sender information (phone number or, if stored in your list of contacts, the name of  
the sender). Select Msg. alert to show only the number of new messages received.  
Voice messages  
If you subscribe to voice mail, all unanswered calls are automatically transferred  
to your voicemail even if your phone is in use or turned off. Your wireless service  
provider will furnish you with a voice mailbox number. You need to save this  
number to your device to use voicemail.  
When you receive a voice message, your device beeps, displays a message, or both.  
The voice mail icon is also displayed in the upper left corner of the mini display  
when the flip is closed and you are in power-save mode. If you receive more than  
one voice message, your device shows the number of voice messages received.  
31  
 
M e s s a g e s  
Set up your voice mail  
Set up your voicemail and personal greeting as soon as your phone is activated.  
1. From the standby mode, press and hold 1.  
2. Follow the prompts to create your pass code and record your greetings.  
Listen to voice messages  
In the standby mode, press and hold 1; or select Menu > Messages > Voice  
messages > Listen to voice messages to dial the voice mailbox number. When you  
connect and the prerecorded greeting begins, follow the automated instructions  
to listen to your voice messages.  
To listen to voice messages from a phone other than the Nokia 3155i:  
1. Dial your cell phone number.  
2. When your voicemail answers, press and hold 1.  
3. Enter your pass code.  
Clear voice mail icon  
To clear the voice mail icon from the display, in the standby mode, select Menu >  
Messages > Voice messages > Clear voice message icon.  
Automate voice mail  
Special characters, called dialing codes, can be added to phone numbers.  
Dialing codes instruct the receiving system to pause, wait, bypass, or accept  
the numbers that follow them in the dialing string.  
Voice mail services vary by service provider. The following instructions are  
examples of common operations. Please check with your service provider for  
specific instructions for using your voice mail service.  
Insert dialing codes  
Press * repeatedly to cycle through the dialing codes. Once the desired code  
appears in the display, pause briefly. The code is inserted into the dialing string.  
The following dialing codes are available:  
* —Bypasses a set of instructions  
+—International prefix  
p—Pauses for 2.5 seconds before sending the numbers that follow  
w—Waits for you to press the call key before sending the numbers or codes  
that follow  
32  
   
M e s s a g e s  
Set up voice mail with dialing codes  
1. Write down your voice mailbox number.  
2. Call and check your voice mail as you normally would.  
3. Write down your interaction with the recorded prompts step-by-step. Keep in  
mind that each voice mail service may vary. However, it should be similar to  
the following:  
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234,  
press #.  
4. In the standby mode, select Menu > Contacts > Speed dialing.  
5. Scroll to an (empty) speed dialing slot, and select Assign.  
6. Enter your voice mailbox number, including the area code.  
7. Enter any dialing codes as necessary using the information that you  
wrote down.  
If you pause for 5 seconds after connecting to voice mail, enter p twice after  
the voice mailbox number; for example, 2145551212pp.  
8. Enter any remaining pauses or other information that allow you to listen to  
your messages, and select OK.  
9. Enter a name (such as voice mail), and select OK.  
To dial and listen to your voice mail, in the standby mode, press and hold the  
assigned speed dialing key.  
E-mail  
E-mail is a network service. See "Network services," p. 5. If your wireless service  
provider supports this feature, you can use the e-mail message to access the  
e-mails. In the standby mode, select Menu > Messages > E-mail.  
Minibrowser messages  
Minibrowser messages is a network service. See "Network services," p. 5 and  
"VXL," p. 69.  
If your wireless service provider supports this feature, you may be able to receive  
text messages via VXL. Unlike SMS text messages, minibrowser messages are not  
stored in the phone and must be accessed from the minibrowser’s home page. In  
the standby mode, select Menu > Messages > Minibrowser messages.  
33  
 
C o n t a c t s  
7. Contacts  
The contacts list can hold up to 500 contacts with multiple numbers and text notes  
for each contact. The amount of numbers and text entries you can save may vary,  
depending on the length and total number of entries in the contacts list.  
Names  
Add new contacts  
To access the contacts list in the standby mode, press the right selection key, or  
select Menu > Contacts > Names if the right selection key on your device has a  
network operator menu.  
Save contact name and number  
1. In the standby mode, enter the phone number you want to save.  
2. Select Save.  
3. Enter the name, and select OK.  
Save contact number only  
1. In the standby mode, enter the phone number you want to save.  
2. Select and hold Options.  
Save an entry  
1. In the standby mode, select Menu > Contacts > Names > Options > Add new.  
2. Enter the name, and select OK.  
3. Enter the phone number, and select OK > Back.  
Save numbers and text items  
You can save different types of phone numbers and short text items per name to  
the contacts list. The first number you save for any entry is automatically set as  
the default or primary number, which you can always change.  
1. In the standby mode, scroll down to display your contacts list, and highlight  
the entry to which you want to add a phone number or text item.  
2. Select Details > Options > Add detail > Number, (General, Mobile, Home, Work,  
or Fax), E-mail address, Web address, Street address, Note, Image, or Tone.  
3. Enter the number or text for the type you have selected, and select OK.  
4. To change a number type (General, Mobile, Home, Work, or Fax), highlight the  
number, and select Options > Change type.  
34  
         
C o n t a c t s  
Change default number  
You can also change which phone number is the default (primary) number for the  
contact entry.  
1. In the standby mode, scroll down to select the contact entry you want to  
change, and select Details.  
2. Scroll to the number you want to set as default, and select Options >  
Set as default.  
Edit contacts list entries  
1. In the standby mode, scroll to the entry you want to edit in your contacts list.  
2. Select Details > Options.  
3. Select one of the following options, which may vary depending on whether  
you are editing a contact listed by phone number or contact name:  
View—View the phone number of the contact.  
Add detail—Add more details to the contact: Name (only available with no  
name added), Number (General, Mobile, Home, Work, or Fax), E-mail address,  
Web address, Street address, Note, Image (only available with no image  
added), or Tone.  
Edit name, Edit number, Edit detail, or Change image—Edit an existing  
contact name, phone number, details, or image attached to the contact.  
Delete—Delete more details (Delete number, Delete detail, or Delete image)  
or the entire contact entry (Delete contact) of the contact.  
Send message—Create and send the contact a text message.  
Use number—Use or save the number (available when you select a contact  
listed with a contact name). Select Options to use the number.  
Set as default—Change the default number of the contact.  
Change type—Change the number type to General, Mobile, Home, Work,  
or Fax.  
Add voice tag or Voice tag—Add a voice tag to the contact with no voice tag  
assigned, or select Playback, Change, or Delete with a voice tag assigned.  
Send bus. card—Send the contact as a business card to another device.  
Caller groups—Add the contact to an existing caller group.  
Speed dialing—Add the contact to your speed dialing list.  
4. Edit the option to your preference, and select OK.  
35  
 
C o n t a c t s  
Access the contacts menu  
1. In the standby mode, select Menu > Contacts and one of the following options:  
Names—View the entries in your contacts list, and select Details or Options >  
Search, Add new, or Delete contact for your selected entry.  
Settings—Change the contacts list view or check the memory status of  
your device.  
Caller groups—View and edit the properties of any of the caller groups,  
including Family, VIP, Friends, Business, or Other.  
Voice tags—Listen to, modify, or delete a voice tag to a contact in the  
contacts list.  
Speed dialing—View or modify the list of speed dial numbers.  
My number—View your own phone number.  
Delete all contacts—Delete all entries in your contacts list.  
2. Select an option to activate the feature or access its submenu.  
Search for a name  
1. In the standby mode, scroll down to display the contents of your contacts list.  
2. Press the key corresponding to the first letter of the name for which you  
are searching.  
3. Scroll to select a contact, and select Details to view the details.  
Send and receive contacts  
You can send and receive an entry in your contacts list using text messaging, if  
supported by your wireless service provider.  
Send a business card  
You can send a business card as a text message to a compatible phone or other  
handheld device.  
1. Highlight the desired entry from your contacts list you wish to send as a business  
card, and select Details > Options > Send bus. card > Via text message.  
If you have more than one number or detail saved to the contact entry, select  
from Primary number or All details options to include these in the business  
card that you wish to send.  
2. Enter the number for your recipient, or select Search to retrieve a number  
from your contacts list.  
3. Select OK and the business card is sent.  
36  
     
C o n t a c t s  
Settings  
Configure settings  
You can select how the contacts appear in your contacts list and view the  
amount of memory used or available in your device.  
In the standby mode, select Menu > Contacts > Settings > Scrolling view to  
change view of name list or Memory status to view the device memory used  
and remaining.  
Caller group  
Caller groups  
You can add contact list entries to any of five caller groups, and assign a unique  
ringtone or graphic to that group. This enables you to identify callers from the  
group by their unique ringing tone or graphic.  
To assign an entry in your contacts list to a caller group, in the standby mode, select  
Menu > Contacts > Caller groups > Family, VIP, Friends, Business, or Other > Group  
members > Add > highlight the contact to add > Add.  
To manage your caller groups, in the standby mode, select Menu > Contacts >  
Caller groups > Family, VIP, Friends, Business, or Other to display the following  
caller group options:  
Rename group—Rename the group to your preference.  
Group ringtone—Set the ringtone for the group.  
Group logo—Turn the graphic for the caller group On or Off, or View the graphic.  
Group members—Add or remove members from the caller group.  
Voice tags  
Voice tags  
You can dial up to 25 stored numbers using voice dialing.  
Before using voice tags, note the following:  
Voice tags are not language-dependent. They depend on the speaker’s voice.  
You must say the name exactly as you said it when you recorded it.  
Voice tags are sensitive to background noise. Record voice tags, and use them  
in a quiet environment.  
37  
       
C o n t a c t s  
Very short names are not accepted. Use long names and avoid similar names  
for different numbers.  
Note:Using voice tags may be difficult in a noisy environment or during an  
emergency, so you should not rely on voice dialing in all circumstances.  
Assign a voice tag to an entry  
Before you can use voice dialing, you must first assign a voice tag to the number.  
1. In the standby mode, select Menu > Contacts > Names, and scroll to the entry  
in your contacts list to which you want to assign a voice tag.  
2. Select Details > Options > Add voice tag > Start.  
3. Speak clearly into the microphone. Do not select Quit unless you want to cancel  
the recording. The device automatically stops recording, and saves and replays  
the voice tag.  
appears next to commands that have voice tags assigned.  
Dial a number  
1. In the standby mode, press and hold the right selection key with the fold open,  
or press and hold the voice key regardless of whether the fold is open or closed.  
2. When you hear several beeps and Speak now appears, release the key.  
3. Pronounce the voice tag clearly into the microphone.  
When the device finds the voice tag, Found: is displayed, and the device  
automatically dials the number. If the device does not locate a number or  
recognize the voice tag, No match found is displayed.  
Voice tags  
1. After you have associated a voice tag to a contact, select Menu > Contacts >  
Voice tags and your desired voice tag entry.  
2. Select Playback, Change, or Delete.  
Speed dial  
Set up speed dialing  
You can associate any entry in the contacts list with a key from 2–9. To dial those  
entries, press and hold the assigned key. See "Speed dialing," p. 49 to activate or  
deactivate speed dialing.  
Assign a key to speed dialing  
1. In the standby mode, select Menu > Contacts > Speed dialing.  
38  
 
C o n t a c t s  
2. Scroll to an (empty) speed dialing slot, and select Assign.  
3. Enter the number (including the area code) and a name for the number, and  
select OK; or select Search to retrieve a number from the contacts list.  
If speed dialing is off, the device displays a prompt and asks if you want to  
turn speed dialing on.  
4. Select Yes to activate speed dialing.  
Change speed dialing numbers  
1. In the standby mode, select Menu > Contacts > Speed dialing.  
2. Scroll to the speed dialing entry you want to change, and select  
Options > Change.  
3. Enter the new number and a name for the entry, and select OK; or select  
Search to retrieve a number from the contacts list.  
Delete speed dialing numbers  
1. In the standby mode, select Menu > Contacts > Speed dialing.  
2. Scroll to the speed dialing entry you want to delete, and select Options >  
Delete > Yes.  
My number  
To display your own phone number, from the standby mode, select Menu >  
Contacts > My number.  
Delete all contacts  
To delete all entries in your contacts list, in the standby mode, select Menu >  
Contacts > Delete all contacts.  
39  
   
M y s t u f f  
8. My stuff  
You can use My Stuff to store downloaded games, tones, images, and applications.  
Your device has a limited amount of memory for storing files in My Stuff.  
This memory is not shared with other functions, such as contacts. If the  
device displays a message that the memory is full, delete some existing files  
before proceeding.  
Games  
Challenge yourself or a friend to one of the fun games in your phone. Some menus  
listed are network services. In the standby mode, select Menu > My Stuff >  
Games > Get new to download a new game.  
Play a game  
To play a game, in the standby mode, select Menu > My Stuff > Games and a  
downloaded game.  
Game details  
To display the name, version, and size of a selected game, select Options > Details.  
Tones  
Tones to use as ringtones or attach to a contact entry or message can be stored in  
or retrieved from this folder. In the standby mode, select Menu > My Stuff >  
Tones to open the tones folder.  
Images  
Images used as screensavers identify a contact entry or, attached to a message,  
can be stored in or retrieved from this folder. In the standby mode, select Menu >  
My Stuff > Images to open the images folder.  
40  
           
M y s t u f f  
Themes  
Use themes to customize the appearance of your phone display screen. Themes  
control the display background, the wallpaper, and the colors and appearance of  
menus and submenus. In the standby mode, select Menu > My Stuff > Themes to  
open the themes folder.  
Applications  
Applications that are downloaded from VXL can be stored in or retrieved from  
this folder. In the standby mode, select Menu > My Stuff > Applications to open  
the applications folder.  
41  
   
T u n e s  
9. Tunes  
Radio  
Your phone has an FM radio that also functions as an alarm clock radio. To listen  
to the FM radio on your phone, connect a compatible music stand or stereo  
headset to the connector on the bottom of the phone. The FM radio uses the wire  
of the headset as an antenna. A compatible headset needs to be attached to the  
device for the FM radio to function properly. The quality of a radio broadcast  
depends on coverage of the radio station in that particular area.  
Warning: Listen to music at a moderate level. Continuous exposure to  
high volume may damage your hearing. Do not hold the device near  
your ear when the loudspeaker is in use, because the volume may be  
extremely loud.  
Turn the radio on and off  
1. Connect the phone to a compatible headset or music stand.  
2. In the standby mode, select Menu > Tunes > Radio. The channel location  
number, the name of the radio channel (if you have saved the channel), and  
the frequency of the radio channel are displayed.  
To use the graphical keys  
,
,
, or  
on the display, scroll left or  
right to the desired key, and select it.  
3. If you have already saved radio channels, select  
channel you would like to listen to.  
or to scroll to the  
To select a radio channel location, briefly press the corresponding number keys.  
4. To turn off the radio, press and hold the end key, or select Options > Turn off.  
Options  
With the radio on, select Options and one of the following:  
Turn off—Turn off the radio.  
Save channel—Save the current station to one of 20 locations (only available  
with a new station entered).  
Channels—Scroll up or down to select a channel from 20 locations. With an  
existing channel highlighted, select Options > Delete channel or Rename to  
delete or rename the saved channel.  
42  
       
T u n e s  
Mono output or Stereo output—Listen to the radio in monaural mode (default) or  
in stereo. Stereo output is available through a stereo enhancement.  
Loudspeaker or Headset—Listen to the radio through the speakerphone or through  
the headset.  
Set frequency—Manually enter the frequency of a known radio station.  
To set the radio frequency, press * and use the keypad to enter the frequency of a  
known radio station.  
To adjust the radio volume, press the volume up and down keys.  
When an application using a browser connection is sending or receiving data, it  
may interfere with the radio.  
When you place or receive a call, the radio automatically mutes. When the call  
ends, the radio switches back on.  
Tune and save a radio channel  
You can save a preset station to any one of 20 locations in memory.  
1. With the radio on, select  
steps, or select and hold  
when a channel is found.  
or  
or  
to change the radio frequency in 0.1 MHz  
to start the channel search. Searching stops  
2. To save the channel, select Options > Save channel.  
3. Enter a name for the channel, and select OK.  
Voice recorder  
This feature enables you to record pieces of speech or sound with your device  
and listen to them later. The total available time is 3 minutes with no memos  
stored. The maximum length of a recording depends on how much memory  
remains available.  
In the standby mode, select Menu > Tunes > Voice memo > Record to start  
the recording or Recordings list to manage the folder you have defined for  
recording storage.  
Record speech or sound  
1. In the standby mode, select Menu > Tunes > Voice memo > Record.  
2. After you hear the recorder start tone, begin recording speech or sound.  
3. When you finish recording, select Stop and your recording is saved to the  
Tones folder in My Stuff.  
43  
 
T u n e s  
Options  
After you have saved the recording to the Tones folder, highlight the recording,  
and select Listen to listen to the recording using the earpiece; or select Options  
and one of the following.  
Delete—Erase the recording.  
Rename—Change the name of the recording.  
Set as—Use your recording as a ringtone (Set as ringtone), contact entry tone  
(Add to contact), incoming message tone (Set as msg. tone), or alarm tone  
(Set as alarm tone).  
Details—Show the name, size, and date of creation of the recording.  
Equalizer  
The equalizer enhances the sound quality when you use the music player by  
amplifying or attenuating frequency bands. You can access five preset equalizer  
settings (Normal, Pop, Rock, Jazz, and Classical) and two customizable settings.  
Activate an equalizer set  
In the standby mode, select Menu > Tunes > Equalizer, scroll to the desired  
setting, and select Activate.  
Create a custom equalizer set  
1. In the standby mode, select Menu > Tunes > Equalizer.  
2. Scroll to the set you want to edit, and select  
Options > Edit.  
The selected set appears in the display with the bar on  
the far left highlighted. The bars adjust frequencies,  
from the lowest (the leftmost bar) to the highest  
(the rightmost bar). The higher the indicator on a  
particular bar, the more that frequency is amplified.  
3. To adjust the frequency, scroll up and down on the bar.  
4. To adjust other frequencies, scroll left or right to the other bars.  
5. Repeat steps 3 and 4 to adjust the setting for each frequency; then  
select Save.  
6. To rename the setting, select Options > Rename, enter a new name, and  
select OK.  
7. To activate the setting, select Activate.  
44  
 
S e t t i n g s  
10. Settings  
Use this menu to change profiles, themes, main display settings, mini display  
settings, tone settings, time and date settings, call settings, phone settings, voice  
commands, enhancement settings, security settings, application settings, network  
settings, network services, and restore factory settings.  
Profiles  
Profiles define how your device reacts when you receive a call or message and  
how your keypad sounds when you press a key. You can leave ringing options,  
keypad tones, and other settings for each of the available profiles at their default  
setting, or customize them to suit your needs.  
Profiles are also available for enhancements such as the headset and car kit.  
See "Enhancements," p. 71.  
To activate a profile, in the standby mode, select Menu > Settings > Profiles >  
Normal, Silent, Meeting, Outdoor, or Pager > Activate.  
Customize a profile  
You can customize any of the profiles in various ways.  
1. In the standby mode, select Menu > Settings > Profiles.  
2. Select the profile you want to customize.  
3. Select Customize and the option you want to customize. See "Tones," p. 40.  
Set a timed profile  
You can use timed profiles to prevent missed calls. For example, suppose you  
attend an event that requires your device be set to Silent before the event starts,  
but you forget to return it to Normal until long after the event. A timed profile  
can prevent missed calls by returning your device to the default profile at a time  
you specify. You can set timed profiles up to 24 hours in advance.  
1. In the standby mode, select Menu > Settings > Profiles.  
2. Select the profile you want to activate and Timed for timed expiration.  
3. Enter the time in hh:mm format for the profile to expire, and select OK.  
45  
         
S e t t i n g s  
Tones  
You can adjust the ringing volume, keypad tones, and more for the active profile.  
See "Customize a profile," p. 45 for more information on profile settings.  
Select Menu > Settings > Tones and one of the following:  
Incoming call alert—Select how the device notifies you of an incoming call.  
Video ringtone—Select On or Off to indicate whether to replace the default audio  
ringtone with the selected video.  
Ringtone—Select the ringtone for incoming calls.  
Ringtone volume—Set the volume of your ringtone.  
Light indicator—Turn the light indicator on or off with On or Off.  
Vibrating alert—Turn the vibrating alert On or Off.  
Message alert tone—Select the tone for received messages.  
Keypad tones—Set the volume of your keypad tones (or turn them off).  
Warning tones—Turn warning and confirmation tones On or Off.  
Alert for—Define which caller groups the selected profile will accept or decline.  
See "Caller groups," p. 37.  
Themes  
Choose a theme to customize the appearance of your phone display. Themes control  
the display background, the wallpaper, and the colors and appearance of menus  
and submenus.  
To choose the theme of your display, in the standby mode, select Menu > Settings >  
Themes > Select theme.  
Main display  
Wallpaper  
You can set your device to display a background picture (wallpaper) or slide set.  
1. In the standby mode, select Menu > Settings > Main display > Wallpaper >  
Select wallpaper or Select slide set > Games, Tones, Images, or Applications.  
2. Browse your selected folder containing the graphics or image of your  
desired wallpaper.  
3. When you find the image of your choice, select Options > Set as wallpaper.  
4. To activate or deactivate wallpaper, in the standby mode, select Menu >  
Settings > Main display > Wallpaper > On or Off.  
46  
       
S e t t i n g s  
Screen saver  
In the standby mode, select Menu > Settings > Main display > Screen saver > On,  
Off, Screen savers (Image, Slide set, or Video clip), or Time-out.  
Power saver  
You can turn the power saver on and off on the main display. In the standby  
mode, select Menu > Settings > Main display > Power saver > On or Off.  
Color schemes  
You can change the color of some display components in your device, such as  
indicators and signal bars.  
In the standby mode, select Menu > Settings > Main display > Color schemes  
and the color scheme of your choice.  
My banner  
If your wireless service provider supports this feature, you can choose whether  
the display shows the operator logo or something else when the phone is in the  
idle state.  
In the standby mode, select Menu > Settings > Main display > My banner >  
Default or Customize.  
Backlight time-out  
You can choose how long to set the backlights on. In the standby mode, select  
Menu > Settings > Main display > Backlight time-out > Always on, Always off, 7  
seconds, 15 seconds, or 30 seconds.  
Mini display  
You can turn the power saver on and off on the mini display. In the standby mode,  
select Menu > Settings > Mini display > Power saver > On or Off.  
Time and date settings  
Clock  
In the standby mode, select Menu > Settings > Time and date > Clock > Show  
clock or Hide clock, Set the time, Time zone, or Time format.  
47  
                 
S e t t i n g s  
Date  
In the standby mode, select Menu > Settings > Time and date > Date > Show date  
or Hide date, Set the date, Date format, or Date separator.  
Auto-update date and time  
Auto-update is a network service. See "Network services," p. 5. If your wireless  
service provider supports this feature, you can allow the digital network to set  
the clock, which is useful when you are out of your home area (for example  
when you have traveled to another network or time zone).  
In the standby mode, select Menu > Settings > Time and date > Auto-update of  
date & time > On, Confirm first, or Off.  
If you use the Auto-update of date & time option while outside your digital  
network, you may be prompted to enter the time manually. Network time will  
replace the time and date when you reenter your digital network.  
If your battery has been removed or has discharged outside the digital network,  
you may be prompted to enter the time manually (when the battery is replaced or  
recharged and you are still outside of the digital network).  
My shortcuts  
Right selection key  
You can customize the right selection key in the standby mode. In the standby  
mode, select Menu > Settings > My shortcuts > Right selection key.  
Call settings  
Location info sharing  
Location info sharing allows the device to share position information over the  
network. For calls to emergency numbers, this position information may be used  
by the emergency operator to determine the position of the device. The functionality  
and accuracy of this feature are dependent on the network, satellite systems, and  
the agency receiving the information. Location info sharing is a network service.  
See "Network services," p. 5.  
This feature may not function in all areas or at all times. This feature is not  
designed to support positioning requests for related calls. Contact your service  
provider for more information about how your phone complies with government  
regulations on location based emergency calling services.  
48  
           
S e t t i n g s  
In the standby mode, select Menu > Settings > Call > Location info sharing.  
Select More to read the disclaimer, then select OK. Select from the options:  
Emergency—This is the default profile. The device location information is shared  
only during an emergency call to the official emergency number programmed  
into your device. The screen displays  
standby mode.  
in the upper left hand corner in the  
On—The device location information is shared with the network whenever the  
device is powered on and activated. The screen displays  
hand corner in the standby mode.  
in the upper left  
Location information will always be shared with the network during emergency  
calls to the official emergency number programmed into the device, regardless of  
which setting is selected. After placing an emergency call the device remains in  
emergency mode for 5 minutes. During this time, the location information will be  
shared with the network. See "Emergency calls," p. 78.  
Anykey answer  
Anykey answer enables you to answer an incoming call. Briefly press any key  
except the right selection key or end key.  
In the standby mode, select Menu > Settings > Call > Anykey answer > On or Off.  
Automatic redial  
Occasionally, your network may experience heavy traffic, resulting in a fast busy  
signal when you dial. With automatic redial activated, your device redials the  
number (number of times is specified by the network), and notifies you when the  
network is available.  
In the standby mode, select Menu > Settings > Call > Automatic redial > On or Off.  
Speed dialing  
You can activate or deactivate speed dialing. In the standby mode, select Menu >  
Settings > Call > Speed dialing > On or Off. See "Set up speed dialing," p. 38.  
Automatic update of service  
With automatic update of service, your device will automatically update the  
service when the network is available.  
In the standby mode, select Menu > Settings > Call > Automatic update of  
service > On or Off.  
49  
       
S e t t i n g s  
Answer when fold is open  
By default, your phone answers an incoming call when you open the fold. You can  
change the default setting to have your phone not answer calls with the fold open.  
In the standby mode, select Menu > Settings > Call > Answer when fold is  
opened > On or Off.  
International prefix  
You can store an international dialing prefix into your device. In the standby  
mode, select Menu > Settings > Call > International prefix.  
In the standby mode, when you enter + (press * twice) at the beginning of a  
phone number, your device automatically inserts the international dialing  
prefix that you have stored after you press the call key.  
Call summary  
Your device can display the time spent on a call when you hang up. In the standby  
mode, select Menu > Settings > Call > Call summary > On or Off.  
Ringing tone for no caller ID  
You can select a different ringtone for calls received with no caller ID.  
In the standby mode, select Menu > Settings > Call > Ringtone for no caller ID >  
On to select or change ringtone or Off.  
Phone settings  
Phone language  
The phone language affects the time and date formats of the clock, alarm clock,  
and calendar. In the standby mode, select Menu > Settings > Phone > Phone  
language and the language of your choice.  
Automatic keyguard  
You can set the keypad of your device to lock automatically after a preset  
time delay.  
1. In the standby mode, select Menu > Settings > Phone > Automatic  
keyguard > On or Off.  
2. If you select On, Set delay: is displayed.  
50  
           
S e t t i n g s  
3. Enter the delay time (in mm:ss format), and select OK.  
When keyguard is on, it may be possible to dial the emergency number  
programmed into your device.  
Touch tones  
Touch tones or DTMF tones are the tones that sound when you press the keys on  
your device keypad. You can use touch tones for many automated dial-up services  
such as banking and airlines or for entering your voice mailbox number andpassword.  
Touch tones are sent during an active call. Send them manually from your device  
keypad, or send them automatically by saving them in your device.  
Set type  
In the standby mode, select Menu > Settings > Phone > Touch tones > Manual  
touch tones and one of the following options:  
Continuous—Used to set the tone sound for as long as you press and hold a key.  
Fixed—Used to set the tone sound as a short tone regardless of how long you  
press a key.  
Off—Used to turn off tones. No tones sound when you press a key.  
Set length  
You can specify touch-tone length for the Fixed option. In the standby mode,  
select Menu > Settings > Phone > Touch tones > Touch tone length > Short  
(0.1 seconds) or Long (0.5 seconds).  
Start-up tone  
You can select to have a start-up tone when you first turn on your device. In the  
standby mode, select Menu > Settings > Phone > Start-up tone > On or Off.  
Help text activation  
Your device displays brief descriptions for most menu items. When you arrive at a  
feature or menu, pause for about 14 seconds and wait for the help text to display.  
If necessary, use the scroll key to page through the full help text.  
The default setting for help text is On. However, you can turn help text on or off.  
In the standby mode, select Menu > Settings > Phone > Help text activation >  
On or Off.  
51  
       
S e t t i n g s  
Voice navigation  
Before using voice tags, note the following:  
Voice tags are not language-dependent, but depend on the speaker’s voice.  
You must say the name exactly as you said it when you recorded it.  
Voice tags are sensitive to background noise. Record voice tags, and use them  
in a quiet environment.  
Very short names are not accepted. Use long names, and avoid similar names  
for different numbers.  
Note:Using voice tags may be difficult in a noisy environment or during an  
emergency, so you should not rely on voice dialing in all circumstances.  
Hands-free operation  
You can set as many as 16 voice commands to enable hands-free operation of  
certain features in your device.  
Assign a voice tag to a command  
Before using voice commands, you must first add a voice tag to the device function.  
1. In the standby mode, select Menu > Settings > Voice navigation.  
2. Select the device function you want to tag: Profiles, Voice mailbox, Radio,  
Voice memo, or Call History.  
3. If necessary, select an option associated with that function and Add.  
4. Select Start, and speak the voice tag clearly into the microphone. Do not  
select Quit unless you want to cancel the recording.  
The device replays and saves the recorded tag. appears next to commands  
with voice tags assigned.  
Activate a voice command  
To issue a command after you have associated a voice tag with a function in your  
device, speak the voice tag.  
1. In the standby mode, press and hold the right selection key or voice key.  
2. With Speak now displayed, pronounce the voice tag clearly into the microphone.  
With the voice tag found, the device displays Found:, and plays the recognized  
voice tag through the earpiece. The function you requested is activated.  
52  
 
S e t t i n g s  
Options  
After you have associated a voice tag to a command, you can select one of the  
following options:  
Playback—Listen to the voice command tag.  
Options > Change—Change the voice command.  
Options > Delete—Erase the voice command tag.  
Phone details  
From the standby mode, select Menu > Settings > Phone details to view the user,  
version, system and icon details of your phone.  
User details  
Scroll to User details, and select one the following submenus to show user details.  
My number (MDN)—Display your mobile number.  
Mobile station ID number (MSID)—Display the non-portable, non-dialable  
identifier number programmed into the device.  
Version details  
Scroll to Version details, and select one the following submenus.  
Phone model—Display the model number of your phone.  
Software version—Display the software version of your device.  
Browser version—Display the software version of your phone web browser.  
Hardware version—Display the hardware version of your device.  
System details  
Scroll to System details, and select one the following submenus.  
System ID (SID)— Display the number for your phone that uniquely identifies your  
cellular service provider.  
Channel—Display the channel of your device.  
Preferred roaming list (PRL)—Display the PRL system that is used by your phone to  
obtain service outside of the home area.  
Mode—Display the operating mode of your device.  
Frequency—Display the frequency used by your device.  
53  
   
S e t t i n g s  
Icon details  
Scroll to Icon details, to view a list of your phone’s icons and descriptions.  
Application settings  
1. In the standby mode, select Menu > Settings > Application settings.  
2. Select one of the following submenus to activate options for preset or  
downloaded games or applications.  
Application sounds > On or Off.  
Application lights > App. defined or Default.  
Application vibration > On or Off.  
Enhancements  
To adjust the enhancement settings, in the standby mode, select Menu > Settings >  
Enhance-ments > Headset, Handsfree, Loopset, TTY/TDD, Music stand, or Charger.  
Some enhancement settings menu items are displayed only if the device has been  
connected to a compatible enhancement.  
Headset  
Important: The headset may affect your ability to hear sounds around  
you. Do not use the headset in situations that may endanger your safety.  
Select Headset to enter the submenu and modify its settings.  
Default profile—Choose the profile you want automatically activated with a  
headset connected.  
Automatic answer—Answer calls automatically after one ring with a headset  
connected. Select On or Off.  
Hands-free operation  
Select Handsfree to enter the submenu and modify its settings.  
Default profile—Choose the profile you want automatically activated with your  
device connected to a car kit.  
Automatic answer—Answer calls automatically after one ring with a car kit  
connected. Select On or Off.  
Lights—Choose to keep the device lights always on, or to shut off automatically  
after several seconds. Select On or Automatic.  
54  
       
S e t t i n g s  
Loopset  
The LPS-4 loopset is recommended for use with your device. Select Loopset to  
enter the submenu and modify its settings.  
Default profile—Choose the profile you want to be automatically activated when  
your device is connected to a loopset.  
Automatic answer—Answer calls automatically after one ring when a loopset is  
connected. Select On or Off.  
TTY/TDD  
Check with the manufacturer of the TTY/TDD device for a connecting cable that is  
compatible with the Nokia device. TTY/TDD communications depend on network  
availability. Check with your wireless service provider for availability and description  
of services.  
Charger  
Select Charger to enter the submenu and modify its settings.  
Default profile—Choose the profile you want automatically activated with your  
device connected to the charger.  
Lights—Choose to keep the device lights always on or to shut off automatically  
after several seconds. Select On or Automatic.  
Security  
When first accessing the security settings, enter the preset lock code, which is by  
default, the last four digits of your phone number. If this does not work, contact  
your wireless service provider for help.  
Phone lock  
The phone lock feature protects your device from unauthorized outgoing calls or  
unauthorized access to information stored in the device. With phone lock activated,  
Phone locked appears each time you turn your device on or off.  
With the device locked, calls may still be possible to the official emergency  
number programmed into your device.  
1. In the standby mode, select Menu > Settings > Security.  
2. Enter the lock code, and select OK. See "Change lock code," p. 56.  
55  
         
S e t t i n g s  
3. Select Phone lock and one of the following options:  
Off—Immediately turns off the device lock feature.  
Lock now—Immediately turns on the device lock feature.  
On power-up—Turns on the device lock feature the next time you turn the  
device on.  
With Lock now selected, you must enter your lock code before the device can  
function normally. With the lock code accepted, your device functions normally.  
Call not allowed appears if you attempt to place a call with your device locked.  
To answer a call with phone lock on, select Answer, or press the call key.  
Allow numbers  
With phone lock on, the only outgoing calls you can make are to the emergency  
number programmed into your device or the number stored in the Allowed no.  
when phone locked location:  
1. In the standby mode, select Menu > Settings > Security.  
2. Enter the lock code, and select OK. See "Change lock code," p. 56.  
3. Select Allowed no. when phone locked, scroll to an (empty) location, select  
Assign, and enter the phone number; or select Assign > Search to recall the  
number from your contacts list. Select OK.  
To call the allowed phone number, ensure that your phone is in the standby  
mode. Scroll down to highlight the number you want to call, or enter it on the  
keypad; and then press the call key to place the call.  
Change lock code  
The preset lock code, by default, is the last four digits of your phone number.  
Depending on your wireless service provider, the preset lock code can be a four  
digit number such as 1234 or 0000. If none of these work, contact your wireless  
service provider for help.  
To ensure the security of your device, you may want to change the preset lock code  
to your own selected four digit number. Avoid using codes similar to emergency  
numbers to prevent accidental dialing of the emergency number.  
If you enter an incorrect lock code five times in a row, your device will treat all  
subsequent entries as incorrect, even if the correct code is entered. If you wait for  
5 minutes and re-enter the correct lock code, the device will accept the lock code.  
Note: With the wrong lock code entered five times in succession, your  
phone will not accept your correct lock code for 5 minutes, even if you  
power off the device between incorrect entries.  
56  
 
S e t t i n g s  
1. In the standby mode, select Menu > Settings > Security.  
2. Enter the lock code, and select OK.  
3. Select Change lock code.  
4. Enter the new lock code (must be 4 characters in length).  
5. Reenter the new lock code for verification, and select OK.  
When changing your lock code, make sure you store it in a safe place, away from  
your device.  
Call restrictions  
Select call restrictions to block or allow numbers for incoming and outgoing  
calls. All calls from numbers entered as blocked numbers are ignored and sent  
to voice mail.  
1. In the standby mode, select Menu > Settings > Security.  
2. Enter the lock code, and select OK. See "Change lock code," p. 56.  
3. Select Call restrictions and the types of calls you want to restrict:  
Restrict outgoing calls—Set restrictions on making calls.  
Restrict incoming calls—Set restrictions on receiving calls.  
4. Select whether to block or allow numbers:  
Blocked numbers—Set the numbers the phone can only block, allowing all  
the rest.  
Allowed numbers—Set the numbers the phone can only call or receive,  
blocking all the rest.  
5. Select Select, Add restriction (unavailable with memory full), Edit (unavailable  
with no number added), or Delete (unavailable with no number added).  
Note: When calls are restricted, calls may be possible to the official  
emergency number programmed into your device.  
Voice privacy  
Voice privacy is a network service. See "Network services," p. 5. If your wireless  
service provider supports this feature, the voice privacy feature protects the  
privacy of your current phone conversation from other callers placing phone calls  
on your same network.  
1. In the standby mode, select Menu > Settings > Security.  
2. Enter the lock code, and select OK. See "Change lock code," p. 56.  
3. Select Voice privacy > On or Off.  
57  
   
S e t t i n g s  
Network  
The Network menu enables you to customize the way your device chooses a network  
in which to operate while you are within or outside of your primary or home system.  
Your device is set to search for the most cost-effective network. If your device  
cannot find a preferred network, it selects a network automatically based on the  
option you choose in the Network menu.  
The menu options you see in your device depend on your service provider’s  
network. The network determines which options actually appear in the device  
menu. Check with your service provider for more information.  
Roaming options  
You can set your device to roam or search for another network when you are not  
in your home area.  
1. In the standby mode, select Menu > Settings > Network > Roaming options  
and one of the following options:  
Home only—You can make and receive calls in your home area only.  
Automatic—The phone automatically searches for service in another digital  
network. The roaming rate applies when not in the home service area.  
2. Select OK, if necessary, to confirm the activation.  
Mode  
You can choose whether your device uses digital or analog service.  
In the standby mode, select Menu > Settings > Network > Mode and one of the  
following service options:  
Digital preferred—The device works in digital mode but will also work in analog  
mode with digital mode unavailable.  
Analog only—The device only works in analog mode.  
Network services  
The following features are network services. See "Network services," p. 5.  
Call forwarding  
Call forwarding tells your network to redirect incoming calls to another number.  
Call forwarding is a network service and may not work the same in all networks,  
so contact your wireless service provider for availability.  
58  
         
S e t t i n g s  
Activate  
The following options may not all appear in the display. Contact your wireless  
service provider for more information.  
1. In the standby mode, select Menu > Settings > Network services > Call  
forwarding > Forward all calls.  
2. Select Activate, enter the number or select Search to retrieve a number from  
your contacts list, and select OK.  
Cancel  
In the standby mode, select Menu > Settings > Network services > Call  
forwarding > Cancel all call forwarding. Cancel all call forwarding may affect  
your ability to receive voice mail messages. Contact your wireless service  
provider for specific details.  
Network feature setting  
This option allows you to activate network services in the phone by using feature  
codes received from your service provider.  
In the standby mode, select Menu > Settings > Network services > Network  
feature setting, enter the code and select Answer.  
My number selection  
This option displays your current phone number, or allows you to select another  
number, if available.  
In the standby mode, select Menu > Settings > Network services >  
My number selection.  
Restore settings  
You can reset some of the menu settings to their original values. Data that you  
have entered or downloaded is not deleted (for example, entries in your contacts  
list are not affected).  
In the standby mode, select Menu > Settings > Restore settings, enter the lock  
code, and select OK. See "Change lock code," p. 56.  
Note: Depending on your wireless service provider, your device may  
sometimes ask you for the security code, instead of the lock code.  
59  
         
T o o l s  
11. Tools  
Your device contains features to help organize your everyday life, including an  
alarm clock, calendar, notes, to-do list, calculator, countdown timer, and stopwatch.  
Alarm clock  
You can set the alarm to sound at the time you want just once or repeatedly  
(for example, every working day). Select Menu > Tools > Alarm clock and one of  
the following options:  
Set, change, or disable the alarm  
Alarm time—Enter the time for the alarm in hh:mm format, select am or pm (with  
12-hour format selected) and select OK. When the alarm is enabled, select Alarm  
time > On to change the alarm time, or Alarm time > Off to turn off the alarm.  
Set the alarm tone  
Alarm tone—Choose the tone for the alarm. Select from one of the following options:  
Standard—Set the default ringtone for the alarm.  
Radio—Set the clock radio feature. At the alarm time, the radio sounds in the  
loudspeaker and the current radio channel is set as the alarm tone. A headset  
must be attached in order to activate the clock radio, otherwise the default  
alarm is sounded.  
Open My Stuff > Tones—Choose a custom ringtone from the list of  
available ringtones.  
Repeat alarm  
Repeat alarm—With the alarm enabled, select Repetition days to select the days  
on which you want the alarm to repeat.  
Snooze time-out  
To set the alarm snooze time, select Snooze time-out > 5 minutes, 10 minutes,  
15 minutes, 30 minutes, 60 minutes, or Other (to enter up to 60 minutes  
snooze time).  
60  
           
T o o l s  
Alarm conditions  
When the alarm is set, Alarm on appears briefly in the display, and  
is  
displayed in the standby mode.  
When the alarm sounds, your device beeps, vibrates (if vibrating alert is on for  
currently active profile), or plays the radio, and the display lights up.  
With the device on, select Stop to shut the alarm off or Snooze. With Snooze  
selected, the phone snoozes for the number of minutes you selected for the  
Snooze time-out, and Snooze on is displayed.  
If you do not press a key when the alarm sounds, the alarms stops (snoozes) for  
the number of minutes you selected for the Snooze time-out, then sounds again.  
You can also select Menu > Tools > Alarm clock > Snooze time-out to reset the  
snooze time.  
If the alarm time is reached while the phone is switched off, the phone switches  
itself on and starts sounding the alarm tone. If you select Stop, the phone asks  
whether you want to activate the phone for calls. Select No to switch off the  
phone, or select Yes to make and receive calls. Do not select Yes when wireless  
phone use may cause interference or danger.  
Calendar  
The calendar keeps track of reminders, calls you need to make, meetings, and  
birthdays. The calendar can even sound an alarm for any of these events.  
The monthly view provides an overview of the selected month and weeks,  
enabling you to jump to a specific date. Any days or dates that appear in bold  
font contain calendar notes such as a meeting or reminder.  
Open  
In the standby mode, select Menu > Tools > Calendar. Scroll to move the cursor in  
some calendar views.  
Go to a date  
In the standby mode, select Menu > Tools > Calendar > Options > Go to date,  
enter the date (mm/dd/yyyy), and select OK.  
Note types  
You can apply five types of notes to your calendar. Your device asks for further  
information depending on which note you choose. You also have the option to  
set an alarm for any note you select.  
61  
   
T o o l s  
1. Go to the date for which you want to set a reminder. See "Go to a date," p. 61.  
2. From the monthly view (with the go-to date highlighted), select Options >  
Make a note and one of the following note types:  
Meeting—Enter a subject, location, and a start and end date and time.  
Call—Enter a phone number, a name, and the date and time.  
Birthday—Enter the person’s name, date and year of birth.  
Memo—Enter a subject and a start and end date.  
Reminder—Enter the subject and date of your reminder.  
You are given the option to set an alarm.  
3. Enter your note, and select Save.  
View notes (day view)  
After you have created calendar notes, you can view them.  
1. In the standby mode, select Menu > Tools > Calendar.  
2. Scroll to the date containing the note that appears in bold type, and  
select View.  
Options while viewing a list of notes  
1. Select Options while viewing a day’s note to display the following:  
The options listed below are available while viewing the header of a note.  
Make a note—Create a new note for the selected date.  
Delete—Delete the note.  
Edit—Edit the note.  
Move—Move the note to another date on your calendar.  
Repeat—Set the note (except for birthday note) to recur on a regular basis  
(daily, weekly, biweekly, monthly, and yearly).  
Go to date—Jump to another date on your calendar.  
Go to today—Jump to the current date on your calendar.  
Send note—Send the note to another device as a text message or in calendar-  
to-calendar format.  
Copy—Copy the note to paste to another date.  
Settings—Set the date and time, date and time format, the day each week  
starts and whether you want your notes to auto delete after a specified time.  
Go to to-do list—Jump to the to-do list on your calendar.  
2. Select an option to activate it or enter its submenu.  
62  
 
T o o l s  
Send a note  
1. In the standby mode, select Menu > Tools > Calendar.  
2. Scroll to the date that appears in bold type, containing the note you want to  
send, and select View.  
3. Scroll to the note you want to send, and select Options > Send note > Send as  
message (Text message) or Via calendar.  
4. If you select Via calendar, enter the number for the recipient, or select Search  
to retrieve a number from the contacts list, and select OK.  
If you select Send as message (Text message), the note appears as a text  
message in the display.  
5. Select Send to > Send to number, Send to e-mail, Send to many, or Send to  
distrib. list.  
6. Enter the number or e-mail for the recipient, or select Search to retrieve a  
number from the contacts list: and select Send.  
Receive notes  
When you receive a calendar note in calendar-to-calendar format, your device  
displays Calendar note received.  
To view calendar notes, select Show, and if necessary, scroll to view the  
entire message.  
To save calendar notes after viewing, select Options > Save.  
To discard calendar notes after viewing, select Exit or Options > Discard.  
When you receive a calendar note or text message, a message notification  
appears in the standby mode. You can save the note in your calendar and set  
an alarm for any date and time.  
Notes  
You can write and save information in Notes and send notes via text message.  
In the standby mode, select Menu > Tools > Notes. With no notes created, select  
Add note, create your note, and select Save when done. With notes already created,  
highlight the note you want to use, and select View to read or Options > Make a  
note, Delete, Edit, Send note (Send as message), or Delete all notes.  
To-do list  
Use the to-do list feature to keep track of your tasks. You can save a note for a  
task, select a priority level for the note and mark it as done when you have  
completed it. You can sort the notes by priority or by date.  
63  
     
T o o l s  
Add a to-do note  
1. In the standby mode, select Menu > Tools > To-do list.  
2. If there are no notes, select Add note.  
3. Enter the subject of the to-do note, and select Save.  
4. Select High, Medium, or Low priority.  
5. Enter the due date and time to set the alarm.  
View a to-do note  
1. In the standby mode, select Menu > Tools > To-do list.  
2. Highlight a to-do note, and select Options and one of the following:  
Add—Add another note.  
Delete—Delete the note.  
Mark note as done or Mark as not done—Mark a note or task as completed or  
not; if completed, no more reminders will follow.  
Sort by deadline—Sort the notes according to their deadlines  
Send—Send the note as a text message or as a calendar note to another  
compatible device.  
Go to calendar—Leave the to-do list, and go to the calendar.  
Save to calendar—Save the to-do note to a date on your calendar.  
Delete done notes—Delete all the completed to-do notes marked as done  
(available only if there are notes done).  
Delete all notes—Delete all the to-do notes in the list.  
3. View the to-do note, and select Edit to edit the note or Options to select from  
some or all of the following:  
Deadline—Set a deadline for the note, listing any uncompleted notes if existing.  
Mark note as done or Mark as not done—Mark a note or task as completed or  
not; if completed, no more reminders will follow.  
Delete—Delete the note.  
Edit priority—Change the priority to high, medium, or low.  
Send—Send the note as a text message or as a calendar note to another  
compatible device.  
Go to calendar—Leave the to-do list, and go to the calendar.  
Save to calendar—Save the to-do note to a date on your calendar.  
64  
       
T o o l s  
Calculator  
The calculator in your device adds, subtracts, multiplies, divides, calculates the  
square and the square root, changes the sign of the number entered, and converts  
currency values.  
Note: This calculator has limited accuracy and is designed for  
simple calculations.  
1. In the standby mode, select Menu > Tools > Calculator.  
2. Enter the first number in the calculation. Press # for a decimal point if necessary.  
To change the sign, select Options > Change sign, or scroll up or down.  
To perform a square or square root calculation, select Options > Square or  
Square root.  
To cycle through the add (+), subtract (-), multiply (*), and divide (/)  
characters, press *.  
3. Enter the second number in your calculation.  
4. Select Equals to complete calculation or Options if more functions are required.  
Currency converter  
You can convert foreign currency to domestic, or vice versa, directly in the  
standby mode or from the Calculator menu.  
Note: When you change base currency, you must enter the new rates  
because all previously set exchange rates are set to zero.  
1. In the standby mode, select Menu > Tools > Calculator > Options >  
Exchange rate > Foreign units in home units or Home units in foreign units.  
Foreign units in home units—The number of home units cost to make one unit  
of foreign currency.  
Home units in foreign units—The number of foreign units cost to make one  
unit of your home currency.  
2. Enter the exchange rate (press # to insert a decimal), and select OK.  
3. In the standby mode or the calculator mode (Menu > Tools > Calculator),  
enter the currency amount to be converted.  
4. Select Options > To home or To foreign.  
To home—converts foreign currency to domestic currency.  
To foreign—converts domestic currency to foreign currency.  
65  
   
T o o l s  
5. If you do not enter an exchange rate, the device will prompt you to do so.  
Select OK. You can edit the exchange rate at anytime.  
Timer  
The countdown timer in your device enables you to enter a specific time (up to 99  
hours and 59 minutes). When the time runs out, your device sounds an alarm.  
Note: The countdown timer only works when the device is on. When you  
turn off your device, the timer is no longer active.  
Set the timer  
1. In the standby mode, select Menu > Tools > Timer > Normal timer, Interval  
timer, or Settings.  
Use Normal timer to measure the countdown time for tasks that have one  
period (timer name). Select Interval timer to save sets of countdown times  
with more than one period.  
2. Enter the time (in hh:mm:ss format), and select OK.  
3. Enter a note for the timer, and select Start.  
appears in the standby mode with the countdown timer set. When the time  
runs out, your device sounds an alarm, displays the timer note, vibrates (if set),  
and flashes its lights.  
Press any key during the alarm to stop the alarm. After 30 seconds the timer alert  
stops automatically.  
Change the time  
After you have set the timer, you can change the time.  
1. With a normal timer set, in the standby mode, select Menu > Tools > Timer >  
Change time.  
2. Enter the new time, and select OK.  
3. Leave the note as it is, or enter a new note; and select Start.  
Interrupt the timer  
After you have set the timer, you can stop the timer. In the standby mode, select  
Menu > Tools > Timer > Stop timer.  
66  
     
T o o l s  
Stopwatch  
You can use the stopwatch in your device to track time. The stopwatch displays  
time in hours, minutes, seconds, and fractions of a second in hh:mm:ss.ss format.  
Using the stopwatch or allowing it to run in the background when using other  
features increases the demand on battery power and reduces the battery life.  
Measure time  
1. In the standby mode, select Menu > Tools > Stopwatch > Split timing or Lap  
timing > Start. The running time is displayed.  
Split timing—You can use the split time function for such things as a long  
distance race when you need to pace yourself. Select Split to note the lapsed  
time. The timer continues to run, and the split time appears below the  
running time. Each time you select Split, the new measured time appears at  
the beginning of the list.  
Lap timing—You can use the lap time function when you want to track how  
long it takes to complete each cycle or lap. Select Lap to note the lap time.  
The clock stops, then starts immediately from zero. The lap time appears  
below the running time. Each time you select Lap, the new measured time  
appears at the beginning of the list.  
2. Select Stop to end the timing, and display the total time or Stop > Options >  
Start or Reset to continue or reset timing.  
Lap and split times  
To save a time while the clock is running, select Stop > Save, enter a name for the  
measurement, and select OK. If you do not enter a name, the total time is used as  
the default title for the lap or split time.  
To view a saved time, in the standby mode, select Menu > Tools > Stopwatch >  
Show last time or View times.  
To delete a saved time from Stopwatch, select View times and the time to delete,  
and select Delete > Yes; or select Delete times > One by one or Delete all.  
Operation note  
If you press the end key and return to the idle or standby mode, the clock  
continues to run in the background, and  
appears in the upper left corner.  
To return to the stopwatch screens, in the standby mode, select Menu > Tools >  
Stopwatch > Continue. To stop the clock, select Stop.  
67  
   
T o o l s  
Options  
You can choose the following options when you use the stopwatch:  
Continue—Appears when the stopwatch is working in the background.  
Show last time— Appears when you have saved a split or lap time and displays the  
last time saved.  
Split timing—Asks if you want to discontinue previous timing.  
Lap timing—Asks if you want to discontinue previous timing.  
View times—Enables you to browse the saved times.  
Delete times—Enables you to delete any saved times. You can delete the saved  
times one by one or all at once.  
68  
 
V X L  
12. VXL  
Your device has access to VXL, which includes selected  
services on the mobile Internet. You can access popular  
features, exclusive music, entertainment, information  
services, and much more.  
www.virgin.com/mobile, for availability and pricing.  
Sign on  
At the start screen, select Menu > VXL.  
After a brief pause, your device attempts to connect to VXL. If you receive an  
error message, your device may not be set up for browsing. Contact your wireless  
provider to make sure that your device is configured properly.  
Your device cannot receive incoming calls when in VXL. Incoming calls are  
automatically forwarded to voice mail.  
Navigate  
Since your device screen is much smaller than a computer screen, the content is  
displayed differently from what you may be accustomed to seeing. This section  
contains guidelines for using device keys to navigate the site.  
Device keys  
To browse the site, scroll up or down.  
Select a highlighted item.  
To enter letters and numbers, press a key from 0 to 9.  
To enter special characters, press *.  
69  
     
V X L  
Make an emergency call while online  
You can end your data connection, then make an emergency call.  
1. To close your connection, press the end key.  
2. Press the end key as many times as needed to clear the display and ready the  
device for calls.  
3. Enter the emergency number for your present location. Emergency numbers  
vary by location.  
4. Press the call key.  
Disconnect  
To close your VXL connection, press and hold the end key.  
70  
   
E n h a n c e m e n t s  
13. Enhancements  
Check the model number of any charger before use  
with this device. This device is intended for use when  
supplied with power from the AC-3 or AC-4 charger.  
Warning: Use only batteries, chargers, and enhancements that are  
approved by Nokia for use with this particular model. The use of any  
other type may invalidate any approval or warranty, and may be  
dangerous. For availability of approved enhancements, please check  
with your dealer.  
A few practical rules about accessories and enhancements:  
Keep all accessories and enhancements out of the reach of small children.  
When you disconnect the power cord of any accessory or enhancement, grasp  
and pull the plug, not the cord.  
Check regularly that enhancements installed in a vehicle are mounted and  
are operating properly.  
Installation of any complex car enhancements must be made by qualified  
personnel only.  
Power:  
Standard 1070 mAh Li-Ion Battery (BL-6C)  
Standard Travel Charger (AC-3)  
Travel Charger (AC-4)  
Mobile Charger (DC-4)  
Charger Adapter (CA-44)  
Use the CA-44 charger adapter to connect the phone to Nokia chargers that  
have a larger barrel size, including ACP-7, ACP-8, ACP-9, ACP-12, AC-1  
(retractable charger), and LCH-12 (mobile charger).  
71  
   
E n h a n c e m e n t s  
Battery information  
Charging and discharging  
Your device is powered by a rechargeable battery. The full performance of new  
battery is achieved only after two or three complete charge and discharge cycles.  
The battery can be charged and discharged hundreds of times, but it will eventually  
wear out. When the talk and standby times are noticeably shorter than normal,  
replace the battery. Use only Nokia approved batteries, and recharge your battery  
only with Nokia approved chargers designated for this device.  
If a replacement battery is being used for the first time or if the battery has not  
been used for a prolonged period, it may be necessary to connect the charger,  
then disconnect and reconnect it to begin charging the battery.  
Unplug the charger from the electrical plug and the device when not in use.  
Do not leave a fully charged battery connected to a charger, since overcharging  
may shorten its lifetime. If left unused, a fully charged battery will lose its  
charge over time.  
If the battery is completely discharged, it may take a few minutes before the  
charging indicator appears on the display or before any calls can be made.  
Use the battery only for its intended purpose. Never use any charger or battery  
that is damaged.  
Do not short-circuit the battery. Accidental short-circuiting can occur when a  
metallic object such as a coin, clip, or pen causes direct connection of the  
positive (+) and negative (-) terminals of the battery. (These look like metal strips  
on the battery.) This might happen, for example, when you carry a spare battery  
in your pocket or purse. Short-circuiting the terminals may damage the battery  
or the connecting object.  
Leaving the battery in hot or cold places, such as in a closed car in summer or  
winter conditions, will reduce the capacity and lifetime of the battery. Always try  
to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot  
or cold battery may not work temporarily, even when the battery is fully charged.  
Battery performance is particularly limited in temperatures well below freezing.  
Do not dispose of batteries in a fire as they may explode. Batteries may also  
explode if damaged. Dispose of batteries according to local regulations.  
Please recycle when possible. Do not dispose as household waste.  
72  
   
E n h a n c e m e n t s  
Nokia battery authentication guidelines  
Always use original Nokia batteries for your safety. To check that you are getting  
an original Nokia battery, purchase it from an authorized Nokia dealer, look for  
the Nokia Original Enhancements logo on the packaging, and inspect the hologram  
label using the following steps:  
Successful completion of the four steps is not a total assurance of the authenticity  
of the battery. If you have any reason to believe that your battery is not an authentic  
original Nokia battery, you should refrain from using it, and take it to the nearest  
authorized Nokia service point or dealer for assistance. Your authorized Nokia  
service point or dealer will inspect the battery for authenticity. If authenticity  
cannot be verified, return the battery to the place of purchase.  
Authenticate hologram  
1. When looking at the hologram on the label, you  
should see the Nokia connecting hands symbol from  
one angle and the Nokia Original Enhancements  
logo when looking from another angle.  
2. When you angle the hologram left, right, down,  
and up, you should see 1, 2, 3, and 4 dots on each  
side respectively.  
3. Scratch the side of the label to reveal a 20-digit  
code, for example, 12345678919876543210.  
Turn the battery so that the numbers are facing  
upward. The 20-digit code reads starting from the  
number at the top row followed by the bottom row.  
4. Confirm that the 20-digit code is valid by following  
the instructions at www.nokia.combatterycheck.  
To create a text message in the USA, enter the 20-digit  
code, for example, 12345678919876543210, and send  
to +44 7786 200276.  
73  
 
E n h a n c e m e n t s  
To create a text message,  
For countries in Asia Pacific, excluding India: Enter the 20-digit code, for  
example, 12345678919876543210, and send to +61 427151515.  
For India only: Enter Battery followed by the 20-digit battery code, for  
example, Battery 12345678919876543210, and send to 5555.  
National and international operator charges will apply.  
You should receive a message indicating whether the code can be authenticated.  
What if your battery is not authentic?  
If you cannot confirm that your Nokia battery with the hologram on the label is  
an authentic Nokia battery, please do not use the battery. Take it to the nearest  
authorized Nokia service point or dealer for assistance. The use of a battery that  
is not approved by the manufacturer may be dangerous and may result in poor  
performance and damage to your device and its enhancements. It may also  
invalidate any approval or warranty applying to the device.  
The battery designated for this device is BL-6C 1070mAh. The talk time is up to  
4 hours and standby time is up to 9 days.  
To find out more about original Nokia batteries, visit www.nokia.com/battery.  
Hearing aid compatibility  
Your mobile device model complies with FCC rules governing hearing aid  
compatibility. These rules require an M3 microphone or higher value. The M-value,  
shown on the device box, refers to lower radio frequency (RF) emissions. A higher  
M-value generally indicates that a device model has a lower RF emissions level,  
which may improve the likelihood that the device will operate with certain  
hearing aids. Some hearing aids are more immune than others are to interference.  
Please consult your hearing health professional to determine the M rating of your  
hearing aid and whether your hearing aid will work with this device. More  
information on accessibility can be found at www.nokiaaccessibility.com.  
Hearing aid compatibility testing on this device was done with the external  
antenna extended.  
74  
C a r e a n d m a i n t e n a n c e  
14. Care and maintenance  
Your device is a product of superior design and craftsmanship and should be  
treated with care. The suggestions below will help you protect your warranty  
coverage.  
Keep the device dry. Precipitation, humidity, and all types of liquids or  
moisture can contain minerals that will corrode electronic circuits. If your  
device does get wet, remove the battery, and allow the device to dry  
completely before replacing it.  
Do not use or store the device in dusty, dirty areas. Its moving parts and  
electronic components can be damaged.  
Do not store the device in hot areas. High temperatures can shorten the life of  
electronic devices, damage batteries, and warp or melt certain plastics.  
Do not store the device in cold areas. When the device returns to its normal  
temperature, moisture can form inside the device and damage electronic  
circuit boards.  
Do not attempt to open the device other than as instructed in this guide.  
Do not drop, knock, or shake the device. Rough handling can break internal  
circuit boards and fine mechanics.  
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean  
the device.  
Do not paint the device. Paint can clog the moving parts and prevent proper  
operation.  
Use only the supplied or an approved replacement antenna. Unauthorized  
antennas, modifications, or attachments could damage the device and may  
violate regulations governing radio devices.  
Use chargers indoors.  
Always create a backup of data you want to keep, such as contacts and  
calendar notes, before sending your device to a service facility.  
All of the above suggestions apply equally to your device, battery, charger, or  
any enhancement. If any device is not working properly, take it to the nearest  
authorized service facility for service.  
75  
   
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
15. Additional safety information  
Your device and its enhancements may contain small parts. Keep them out of the  
reach of small children.  
Operating environment  
This device meets RF exposure guidelines when used either in the normal use  
position against the ear or when positioned at least 2.2 centimeters (7/8 inches)  
away from the body. When a carry case, belt clip or holder is used for body-worn  
operation, it should not contain metal and should position the device the  
above-stated distance from your body.  
In order to transmit data files or messages, this device requires a good quality  
connection to the network. In some cases, transmission of data files or messages  
may be delayed until such a connection is available. Ensure that the separation  
distance instructions mentioned in this paragraph are followed until the  
transmission is completed.  
Medical devices  
Operation of any radio transmitting equipment, including wireless phones, may  
interfere with the functionality of inadequately protected medical devices.  
Consult a physician or the manufacturer of the medical device to determine if  
they are adequately shielded from external RF energy or if you have any questions.  
Switch off your device in health care facilities when any regulations posted in  
these areas instruct you to do so. Hospitals or health care facilities may be using  
equipment that could be sensitive to external RF energy.  
Pacemakers  
Pacemaker manufacturers recommend that a minimum separation of 15.3  
centimeters (6 inches) be maintained between a wireless phone and a pacemaker  
to avoid potential interference with the pacemaker. These recommendations are  
consistent with the independent research by and recommendations of Wireless  
Technology Research. Persons with pacemakers should do the following:  
Always keep the device more than 15.3 centimeters (6 inches) from  
the pacemaker  
Do not carry the device in a breast pocket  
76  
         
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
Hold the device to the ear opposite the pacemaker to minimize the potential  
for interference.  
If you suspect interference, switch off your device, and move the device away.  
Hearing aids  
Some digital wireless devices may interfere with some hearing aids. If interference  
occurs, consult your service provider.  
Vehicles  
RF signals may affect improperly installed or inadequately shielded electronic  
systems in motor vehicles such as electronic fuel injection systems, electronic  
antiskid (antilock) braking systems, electronic speed control systems, air bag  
systems. For more information, check with the manufacturer or its representative  
of your vehicle or any equipment that has been added.  
Only qualified personnel should service the device, or install the device in a  
vehicle. Faulty installation or service may be dangerous and may invalidate any  
warranty that may apply to the device. Check regularly that all wireless device  
equipment in your vehicle is mounted and operating properly. Do not store or  
carry flammable liquids, gases, or explosive materials in the same compartment  
as the device, its parts, or enhancements. For vehicles equipped with an air bag,  
remember that air bags inflate with great force. Do not place objects, including  
installed or portable wireless equipment in the area over the air bag or in the air  
bag deployment area. If in-vehicle wireless equipment is improperly installed and  
the air bag inflates, serious injury could result.  
Using your device while flying in aircraft is prohibited. Switch off your device  
before boarding the aircraft. The use of wireless teledevices in an aircraft may  
be dangerous to the operation of the aircraft, disrupt the wireless telephone  
network, and may be illegal.  
Potentially explosive environments  
Switch off your device when in any area with a potentially explosive atmosphere  
and obey all signs and instructions. Potentially explosive atmospheres include  
areas where you would normally be advised to turn off your vehicle engine.  
Sparks in such areas could cause an explosion or fire resulting in bodily injury  
or even death. Switch off the device at refuelling points such as near gas pumps  
at service stations. Observe restrictions on the use of radio equipment in fuel  
depots, storage, and distribution areas; chemical plants; or where blasting  
operations are in progress. Areas with a potentially explosive atmosphere are  
77  
     
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
often but not always clearly marked. They include below deck on boats, chemical  
transfer or storage facilities, vehicles using liquefied petroleum gas (such as  
propane or butane), and areas where the air contains chemicals or particles  
such as grain, dust, or metal powders.  
Emergency calls  
Important: Wireless phones, including this device, operate using radio  
signals, wireless networks, landline networks, and user-programmed  
functions. Because of this, connections in all conditions cannot be  
guaranteed. You should never rely solely on any wireless device for  
essential communications like medical emergencies.  
To make an emergency call do the following:  
1. If the device is not on, switch it on. Check for adequate signal strength.  
2. Press the end key as many times as needed to clear the display and ready the  
device for calls.  
3. Enter the official emergency number for your present location, and press the  
call key. Emergency numbers vary by location  
If certain feature are in use, you may first need to turn those features off before  
you can make an emergency call. Consult this guide or your service provider for  
more information.  
When making an emergency call, give all the necessary information as accurately  
as possible. Your wireless device may be the only means of communication at the  
scene of an accident. Do not end the call until given permission to do so.  
Certification information (SAR)  
THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES.  
Your mobile device is a radio transmitter and receiver. It is designed not to exceed  
the limits for exposure to radio waves recommended by international guidelines.  
These guidelines were developed by the independent scientific organization  
ICNIRP and include safety margins designed to assure the protection of all  
persons, regardless of age and health.  
The exposure guidelines for mobile devices employ a unit of measurement known  
as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP  
guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue.  
Tests for SAR are conducted using standard operating positions with the  
device transmitting at its highest certified power level in all tested frequency  
78  
     
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
bands. The actual SAR level of an operating device can be below the maximum  
value because the device is designed to use only the power required to reach the  
network. That amount changes depending on a number of factors such as how  
close you are to a network base station. The highest SAR value under the ICNIRP  
guidelines for use of the device at the ear is 0.84 W/kg.  
Use of device accessories and enhancements may result in different SAR values.  
and the network band. Additional SAR information may be provided under  
Your mobile device is also designed to meet the requirements for exposure to  
radio waves established by the Federal Communications Commission (USA) and  
Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over  
1 gram of tissue. The highest SAR value reported under this standard during  
product certification for use at the ear is 1.22 W/kg and when properly worn on  
the body is 0.78 W/kg. Information about this device model can be found at  
http://www.fcc.gov/oet/fccid by searching the equipment authorization system  
using FCC ID: QMNRM-41.  
Technical information  
Type designation—RM-41  
Dimensions—8.84 centimeters (3.34 inches) long; 4.55 centimeters (1.79 inches)  
wide; and 2.44 centimeters (0.96 inch) deep  
Weight—2.98 oz without BL-6C 1070 mAh Battery  
3
Volume—86 cm  
Wireless networks—CDMA 800 and 1900 MHz  
Frequency range (Tx)—AMPS: 824.04–848.97 MHz,  
PCS: 1851.25–1908.75 MHz, Cellular: 824.70–848.37 MHz  
Frequency range (Rx)—AMPS: 869.04–893.97 MHz,  
PCS: 1931.25–1988.75 MHz, Cellular: 869.70–893.37 MHz  
Battery information  
This section provides information about battery charging times with the Travel  
Charger (AC-4) and the Standard Travel Charger (AC-3), talk and standby times.  
Be aware that the information in this section is subject to change. For more  
information, contact your network operator.  
79  
             
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
Charge the battery  
1. Connect the charger to an ac wall outlet.  
2. Connect the plug from the charger to the  
base of the phone. The battery indicator  
bar starts scrolling.  
If Not charging is displayed, wait for a  
while, disconnect the charger, plug it in  
again, and retry. If charging still fails,  
contact your dealer.  
3. When the battery is fully charged, the bar stops scrolling. Disconnect the  
charger from the phone and the ac outlet.  
The BL-6C battery provides up to 4 hours talk time, and up to 9 days of standby  
time. Operation times are estimates and may vary, depending on network  
conditions, charging, and device use.  
Check the battery  
Warning: Use only batteries, chargers, and enhancements approved by  
Nokia for use with this particular model. The use of any other types may  
invalidate any approval or warranty, and may be dangerous.  
Check the model number of any charger before use with this device. This device  
is intended for use when supplied with power from an AC-3, AC-4, and DC-4  
charger, and from AC-1, ACP-7, ACP-12, and LCH-12 charger when used with  
the charger adapter CA-44, which is available at your Nokia dealer or  
For availability of approved enhancements, please check with your dealer.  
The following charging times are approximate with the BL-6C 1070 mAh Li-Ion  
battery:  
Travel Charter (AC-4): Up to 1 hour 35 minutes  
Standard Travel Charger (AC-3): Up to 3 hours 45 minutes  
Talk and standby times  
Operation times are estimates only and depend on signal strength, phone use,  
network conditions, features used, battery age and condition (including charging  
habits), temperatures to which the battery is exposed, and other factors.  
Talk time: up to 4 hours (digital)  
Standby time: up to 9 days  
80  
 
Index  
NUMERICS  
C
1-touch dialing 38  
calculator 65  
calendar 61  
send notes 63  
A
view notes 62  
call forwarding 58  
cancel 59  
call history 24  
call list  
about your device 5  
accessibility 8  
accessibility solutions 8  
alarm  
snooze 60  
delete 25  
alarm clock 60  
antenna 14  
call restrictions 57  
call settings 48  
call summary 50  
call times  
view 25  
caller groups 37  
calls  
anykey answer 49  
application settings 54  
applications 41  
automate voicemail 32  
automatic redial 49  
auto-update of date and time 48  
answer 18  
make 17  
B
view incoming 24  
view missed 24  
view outgoing 25  
care and maintenance 75  
change time 66  
charger 55  
connect 16  
clock 47  
color schemes 47  
conference calling 18  
contact Nokia 7  
contacts 34  
back cover  
remove 15  
replace 16  
backlight time-out 47  
backlight timeout 47  
banner 47  
batteries and chargers 72  
battery  
authentication 73  
authentication guidelines 73  
change 15  
charge 16  
charging 16  
information 72  
remove 15  
replace 16  
caller group 37  
delete 39  
edit 35  
names 34  
search 36  
settings 37  
view 36  
voice tags 37  
talk and standby times 80  
battery information 79  
business cards 36  
81  
I n d e x  
contacts list  
I
add 34  
send 36  
countdown timer 66  
currency converter 65  
customer care 7  
images 40  
indicators and icons 10  
international prefix 50  
interrupt timer 66  
K
D
keyguard 20  
automatic 50  
keypad  
date setting 48  
delete call logs 25  
dialing codes 32  
dimensions 79  
display language 50  
distribution list 29  
unlock 20  
keys and parts 9  
L
E
languages 50  
location info sharing 48  
lock code 56  
lock keypad 20  
loopset 55  
emergency calls 78  
while using wireless Internet 70  
with keypad locked 51  
enhancement settings 54  
charger 55  
loudspeaker 19  
handsfree 54  
headset 54  
loopset 55  
M
main display 46  
medical devices 76  
messages 26  
TTY/TDD 55  
enhancements 71  
equalizer 44  
delete 29  
ESN 7  
minibrowser messages 33  
read 27  
explosive environments 77  
settings 30  
F
voice messages 31  
mini display 47  
minibrowser messages 33  
mode 58  
My Account 23  
my number selection 59  
my numbers 39  
My Stuff 40  
factory settings 59  
G
games 40  
H
handsfree 54  
headset 17, 54  
hearing aids 77  
help 7  
applications 41  
games 40  
images 40  
themes 41  
tones 40  
help text 12, 51  
82  
I n d e x  
N
S
network feature setting 59  
network menu 58  
network services 5, 58  
no caller ID  
safety 4  
vehicles 77  
ring tone 50  
notes 63  
number  
SAR information 78  
screen saver 47  
scrolling 11  
save 34  
security 12  
security feature 12  
security settings 55  
sending options 30  
service  
automatic update 49  
set  
O
operating environment 76  
organize functions 13  
organizer 60, 6064  
time 47  
setting up phone 14  
settings 45  
P
pacemakers 76  
phone at a glance 9  
phone details 53  
phone label 7  
main display 46  
profiles 45  
themes 46  
phone lock 55  
change lock code 56  
phone menus 11  
phone set up 14  
phone settings 50  
power saver  
tones 46  
shortcut 48  
snooze 60  
softkeys 10  
speed dial 49  
main display 47  
mini display 47  
predictive text 21  
activation 22  
language 22  
text entry 21  
profiles 45  
standard mode 21  
standby mode  
idle mode 10  
start screen 10  
start-up tone 51  
stopwatch 67  
stopwatch options 68  
Q
T
quick keys 10  
talk and standby times 80  
technical information 79  
text entry 21  
R
change case and mode 22  
predictive text 21  
standard 21  
radio 42  
restore factory settings 59  
roaming options 58  
standard mode 21  
83  
I n d e x  
text messages 26  
folders 28  
V
vehicles 77  
view  
read 27  
reply 27  
templates 27  
write and send 26  
themes 41, 46  
time and date settings 47  
timed profiles 45  
timer 66  
to-do list 63  
to-do note  
add 64  
view 64  
tones 40, 46  
tools 60  
missed calls 24  
received calls 24  
saved messages 28  
to-do note 64  
voice command  
playback  
change 53  
voice commands 52  
voice dial 52  
voice messages 31  
voice privacy 57  
voice recorder 43  
voice tags 37  
volume 79  
touch tones 51  
TTY/TDD 55  
Tunes 42  
adjust 19  
tunes  
loudspeaker 19  
VXL 69  
equalizer 44  
radio 42  
turn phone off 17  
turn phone on 17  
type designation 79  
sign on 69  
W
wallpaper 46  
weight 79  
welcome 7  
wireless Internet  
disconnect 70  
make an emergency call 70  
wireless networks 79  
U
unlock keypad 20  
update of service  
automatic 49  
updates 8  
user guide updates 8  
84  

Mr Coffee mrx35 User Manual
Motorola T720 User Manual
KitchenAid KCM534ER0 User Manual
Kenwood KDC M907 User Manual
JVC UX MD9000R User Manual
Jabra LINK 280 User Manual
ID Tech 60 User Manual
Emerson CKS1701 User Manual
Dual MXD45 User Manual
Cincinnati Bell Cell Phone 6126 User Manual