LG Electronics VX5400 User Manual

V X 5 4 0 0  
T e l é f o n o c o n C á m a r a  
G u í a d e l U s u a r i o  
User Guide  
Camera Phone  
VX5400  
Important Safety Precautions  
Read these simple guidelines. Breaking the rules may be dangerous  
or illegal. Further detailed information is given in this user guide.  
Violation of the instructions may cause serious injury or death.  
Never use an unapproved battery since this could  
damage the phone and/or battery and could cause  
the battery to explode.  
Never place your phone in a microwave oven as it will  
cause the battery to explode.  
Never store your phone in temperatures less than  
-4°F or greater than 122°F.  
Do not dispose of your battery near fire or with  
hazardous or flammable materials.  
When riding in a car, do not leave your phone or set  
up the hands-free kit near the air bag. If wireless  
equipment is improperly installed and the air bag is  
deployed, you may be seriously injured.  
Do not use a hand-held phone while driving.  
Do not use the phone in areas where its use is  
prohibited. (For example: aircraft)  
VX5400 1  
Important Safety Precautions  
Do not expose the battery charger or adapter to direct  
sunlight or use it in places with high humidity, such as  
a bathroom.  
Do not use harsh chemicals (such as alcohol,  
benzene, thinners, etc.) or detergents to clean your  
phone. This could cause a fire.  
Do not drop, strike, or shake your phone severely. It  
may harm the internal circuit boards of the phone.  
Do not use your phone in high explosive areas as the  
phone may generate sparks.  
Do not damage the power cord by bending, twisting,  
pulling, or heating. Do not use the plug if it is loose as  
it may cause electric shock or fire.  
Do not place any heavy items on the power cord. Do  
not allow the power cord to be crimped as it may  
cause electric shock or fire.  
Do not handle the phone with wet hands while it is  
being charged. It may cause an electric shock or  
seriously damage your phone.  
Do not disassemble the phone.  
2 VX5400  
Do not place or answer calls while charging the  
phone as it may short-circuit the phone and/or cause  
electric shock or fire.  
Do not hold or let the antenna come in contact with  
your body during a call.  
Make sure that no sharp-edged items, such as  
animal’s teeth or nails, come into contact with the  
battery. This could cause a fire.  
Store the battery out of reach of children.  
Be careful that children do not swallow any parts  
(such as earphone, connection parts of the phone,  
etc.) This could cause asphyxiation or suffocation  
resulting in serious injury or death.  
Unplug the power cord and charger during lightning  
storms to avoid electric shock or fire.  
Only use the batteries and chargers provided by LG.  
The warranty will not be applied to products provided  
by other suppliers.  
Only authorized personnel should service the phone  
and its accessories. Faulty installation or service may  
result in accidents and consequently invalidate the  
warranty.  
An emergency call can be made only within a service  
area. For an emergency call, make sure that you are  
within a service area and that the phone is turned on.  
VX5400 3  
Table of Contents  
Important Safety Precautions .1  
Welcome . . . . . . . . . . . . . . . . . . . .8  
Quick Access to Convenient  
Features . . . . . . . . . . . . . . . . . . . .19  
Vibrate Mode . . . . . . . . . . . . . . . . . . .19  
Mute Function . . . . . . . . . . . . . . . . . . .19  
Volume Quick Adjustment . . . . . . . .19  
Call Waiting . . . . . . . . . . . . . . . . . . . . .19  
Voice Commands . . . . . . . . . . . . . . . .19  
Technical Details . . . . . . . . . . . . .9  
Important Information . . . . . . . . . . . .9  
Phone Overview . . . . . . . . . . . .12  
Rear view . . . . . . . . . . . . . . . . . . . . . . .13  
Menus Overview . . . . . . . . . . . .14  
Menu Access . . . . . . . . . . . . . . . . . . .15  
Entering and Editing  
Information . . . . . . . . . . . . . . . . .20  
Text Input . . . . . . . . . . . . . . . . . . . . . . .20  
Text Input Modes . . . . . . . . . . . . . .20  
Getting Started with Your  
Phone . . . . . . . . . . . . . . . . . . . . . .16  
Installing the Battery . . . . . . . . . . . . .16  
Removing the Battery . . . . . . . . . . .16  
Charging the Battery . . . . . . . . . . . .16  
Battery Temperature Protection . . .17  
Battery Charge Level . . . . . . . . . . . .17  
Signal Strength . . . . . . . . . . . . . . . . .17  
Turning the Phone On and Off . . . .17  
Turning the Phone On . . . . . . . . . .17  
Turning the Phone Off . . . . . . . . . .17  
Making Calls . . . . . . . . . . . . . . . . . . .17  
Correcting Dialing Mistakes . . . . . .17  
Redialing Calls . . . . . . . . . . . . . . . . . .18  
Receiving Calls . . . . . . . . . . . . . . . . .18  
Screen Icons . . . . . . . . . . . . . . . . . . .18  
Contacts in Your Phone’s  
Memory . . . . . . . . . . . . . . . . . . . .21  
Storing Basics . . . . . . . . . . . . . . . . . .21  
Customizing Individual Entries . . . .21  
Speed Dial . . . . . . . . . . . . . . . . . . . . . .21  
Storing a Number with Pauses . . .21  
Adding Another Phone Number . .22  
Changing the Default Number . . . .23  
Deleting . . . . . . . . . . . . . . . . . . . . . . . .23  
Speed Dialing . . . . . . . . . . . . . . . . . . .24  
GET IT NOW . . . . . . . . . . . . . . . . . . .25  
1. Tunes & Tones . . . . . . . . . . . . . . . .25  
1.1 Get New Ringtones . . . . . . . . . .25  
1.2 My Ringtones . . . . . . . . . . . . . . .25  
The user guide gives navigation instructions according to the default "Classic"  
theme in the Display Settings menu. If other themes are set, navigating the  
phone's menus may be different.  
4 VX5400  
1.3 My Sounds . . . . . . . . . . . . . . . . .26  
2. Pictures . . . . . . . . . . . . . . . . . . . . . .26  
2.1 Get New Pictures . . . . . . . . . . . .26  
2.2 My Pictures . . . . . . . . . . . . . . . .27  
2.3 Take Picture . . . . . . . . . . . . . . . .27  
2.4 PIX Place . . . . . . . . . . . . . . . . . . .28  
3. Games . . . . . . . . . . . . . . . . . . . . . . . .28  
4. News & Info . . . . . . . . . . . . . . . . . .28  
5. Tools on the Go . . . . . . . . . . . . . . . .30  
6. Extras . . . . . . . . . . . . . . . . . . . . . . . .30  
8. Voicemail # . . . . . . . . . . . . . . . . .38  
9. Callback # (On/ Off) . . . . . . . . . .38  
10. Signature (None/ Custom) . . . .39  
Erasing Messages . . . . . . . . . . . . . . .39  
CONTACTS . . . . . . . . . . . . . . . . . . . .40  
1. New Contact . . . . . . . . . . . . . . . . . .40  
2. Contact List . . . . . . . . . . . . . . . . . . .40  
3. Groups . . . . . . . . . . . . . . . . . . . . . . .40  
4. Speed Dials . . . . . . . . . . . . . . . . . . .41  
5. In Case of Emergency (ICE) . . . .41  
6. My Name Card . . . . . . . . . . . . . . . .42  
RECENT CALLS . . . . . . . . . . . . . . . .43  
1. Missed . . . . . . . . . . . . . . . . . . . . . . .43  
2. Received . . . . . . . . . . . . . . . . . . . . .43  
3. Dialed . . . . . . . . . . . . . . . . . . . . . . . .44  
4. All . . . . . . . . . . . . . . . . . . . . . . . . . . . .44  
5. View Timers . . . . . . . . . . . . . . . . . . .45  
SETTINGS & TOOLS . . . . . . . . . . . .46  
1. My Account . . . . . . . . . . . . . . . . . .46  
2. Tools . . . . . . . . . . . . . . . . . . . . . . . . .46  
2.1 Voice Commands . . . . . . . . . . . .46  
2.1.1 Call <Name or Number> . . .46  
MESSAGING . . . . . . . . . . . . . . . . . .31  
1. New Message . . . . . . . . . . . . . . . .31  
1.1 TXT Message . . . . . . . . . . . . . . .31  
1.2 Picture Message . . . . . . . . . . . .32  
2. Inbox . . . . . . . . . . . . . . . . . . . . . . . .34  
3. Sent . . . . . . . . . . . . . . . . . . . . . . . . .35  
4. Drafts . . . . . . . . . . . . . . . . . . . . . . . .36  
5. Voicemail . . . . . . . . . . . . . . . . . . . .36  
6. Mobile IM . . . . . . . . . . . . . . . . . . . .37  
7. Email . . . . . . . . . . . . . . . . . . . . . . . . .37  
8. Chat . . . . . . . . . . . . . . . . . . . . . . . . . .37  
MSG Settings . . . . . . . . . . . . . . . . . . .38  
1. Entry Mode (Word/ Abc/ ABC/  
123) . . . . . . . . . . . . . . . . . . . . . . .38  
2.1.2 Send Msg to <Name or  
Number> . . . . . . . . . . . . . . . .47  
2. Auto Save (On/ Off/ Prompt) . . .38  
3. Auto Erase (On/ Off) . . . . . . . . . .38  
4. TXT Auto View (On/ Off) . . . . . .38  
5. TXT Auto Play (On/ Off) . . . . . . .38  
6. Pic Auto Receive (On/ Off) . . . .38  
7. Quick Text . . . . . . . . . . . . . . . . .38  
2.1.3 Go to <Menu> . . . . . . . . . . .47  
2.1.4 Check <Item> . . . . . . . . . . . .47  
2.1.5 Lookup <Name> . . . . . . . . . .47  
2.1.6 My Account . . . . . . . . . . . . . .47  
2.1.7 Help . . . . . . . . . . . . . . . . . . . .47  
2.2 Calculator . . . . . . . . . . . . . . . . . .47  
VX5400 5  
Table of Contents  
2.3 Calendar . . . . . . . . . . . . . . . . . . .48  
5.5 Dial Fonts . . . . . . . . . . . . . . . . . .58  
5.6 Clock Format . . . . . . . . . . . . . . .58  
6. Phone Settings . . . . . . . . . . . . . . .59  
6.1 Standalone Mode (Airplane  
Mode) . . . . . . . . . . . . . . . . . . . . .59  
2.4 Alarm Clock . . . . . . . . . . . . . . . .48  
2.5 Stopwatch . . . . . . . . . . . . . . . . . .49  
2.6 World Clock . . . . . . . . . . . . . . . .49  
2.7 Notepad . . . . . . . . . . . . . . . . . . .49  
2.8 Ez Tip Calc . . . . . . . . . . . . . . . . . .50  
3. Bluetooth Menu . . . . . . . . . . . . . .50  
3.1 Add New Device . . . . . . . . . . . .50  
My Phone Name . . . . . . . . . . . . . . .52  
Turn On . . . . . . . . . . . . . . . . . . . . . . .52  
Discovery Mode . . . . . . . . . . . . . . . .52  
Supported Profiles . . . . . . . . . . . . . .52  
Last Search . . . . . . . . . . . . . . . . . . . .53  
Auto Pair Handsfree . . . . . . . . . . . .53  
Transferring Audio . . . . . . . . . . . . . . .53  
4. Sounds Settings . . . . . . . . . . . . . . .54  
4.1 Master Volume . . . . . . . . . . . . .54  
4.2 Call Sounds . . . . . . . . . . . . . . . .54  
4.2.1 Call Ringtone . . . . . . . . . . .55  
4.2.2 Call Vibrate . . . . . . . . . . . . .55  
4.3 Alert Sounds . . . . . . . . . . . . . . . .55  
4.4 Keypad Volume . . . . . . . . . . . . .55  
4.5 Service Alerts . . . . . . . . . . . . . .56  
4.6 Power On/Off . . . . . . . . . . . . . .56  
5. Display Settings . . . . . . . . . . . . . . .56  
5.1 Banner . . . . . . . . . . . . . . . . . . . . .56  
5.1.1 Personal Banner . . . . . . . . .56  
5.1.2 ERI Banner . . . . . . . . . . . . .57  
5.2 Backlight . . . . . . . . . . . . . . . . . .57  
5.3 Wallpaper . . . . . . . . . . . . . . . . . .57  
5.4 Display Themes . . . . . . . . . . . . .58  
6.2 Set Shortcut Keys . . . . . . . . . . .59  
6.3 Voice Commands . . . . . . . . . . . .60  
6.4 Language . . . . . . . . . . . . . . . . . .60  
6.5 Location . . . . . . . . . . . . . . . . . . .60  
6.6 Security . . . . . . . . . . . . . . . . . . .61  
6.6.1 Edit Codes . . . . . . . . . . . . .61  
6.6.2 Restrictions . . . . . . . . . . . .61  
6.6.3 Phone Lock . . . . . . . . . . . .62  
6.6.4 Lock Phone Now . . . . . . . .62  
6.6.5 Reset Default . . . . . . . . . .62  
6.6.6 Restore Phone . . . . . . . . . .63  
6.7 System Select . . . . . . . . . . . . . .63  
6.8 NAM Select . . . . . . . . . . . . . . . .63  
6.9 Auto NAM . . . . . . . . . . . . . . . . . .64  
7. Call Settings . . . . . . . . . . . . . . . . . .64  
7.1 Answer Options . . . . . . . . . . . . .64  
7.2 Auto Retry . . . . . . . . . . . . . . . . . .64  
7.3 TTY Mode . . . . . . . . . . . . . . . . .65  
7.4 One Touch Dial . . . . . . . . . . . . .66  
7.5 Voice Privacy . . . . . . . . . . . . . . . .66  
8. Memory . . . . . . . . . . . . . . . . . . . . . .67  
9. Phone Info . . . . . . . . . . . . . . . . . . . .67  
9.1 My Number . . . . . . . . . . . . . . . .67  
9.2 SW/HW Version . . . . . . . . . . . . .68  
9.3 Icon Glossary . . . . . . . . . . . . . . .68  
6 VX5400  
FCC Hearing-Aid Compatibility  
(HAC) Regulations for Wireless  
Devices . . . . . . . . . . . . . . . . . . . . . . .88  
Safety . . . . . . . . . . . . . . . . . . . . . .69  
TIA Safety Information . . . . . . . . . .69  
Exposure to Radio Frequency  
Signal . . . . . . . . . . . . . . . . . . . . . . . .69  
Accessories . . . . . . . . . . . . . . . .90  
Limited Warranty Statement .91  
Antenna Care . . . . . . . . . . . . . . . . .69  
Phone Operation . . . . . . . . . . . . . . .69  
Tips on Efficient Operation . . . . . . .69  
Driving . . . . . . . . . . . . . . . . . . . . . . .70  
Electronic Devices . . . . . . . . . . . . .70  
Pacemakers . . . . . . . . . . . . . . . . . .70  
Hearing Aids . . . . . . . . . . . . . . . . . .70  
Other Medical Devices . . . . . . . . . .70  
Health Care Facilities . . . . . . . . . . .71  
Vehicles . . . . . . . . . . . . . . . . . . . . . .71  
Posted Facilities . . . . . . . . . . . . . . .71  
Aircraft . . . . . . . . . . . . . . . . . . . . . . .71  
Blasting Areas . . . . . . . . . . . . . . . . .71  
Potentially Explosive Atmosphere .71  
Glossary . . . . . . . . . . . . . . . . . . . .94  
Terminology . . . . . . . . . . . . . . . . . . .94  
Acronyms and Abbreviations . . .94  
Index . . . . . . . . . . . . . . . . . . . . . . .96  
For Vehicles Equipped with an Air  
Bag . . . . . . . . . . . . . . . . . . . . . . . . . .72  
Safety Information . . . . . . . . . . . . .72  
Charger and Adapter Safety . . . . . .73  
Battery Information and Care . . . . .73  
Explosion, Shock, and Fire  
Hazards . . . . . . . . . . . . . . . . . . . . . .74  
General Notice . . . . . . . . . . . . . . . .74  
Caution: Avoid potential hearing  
loss. . . . . . . . . . . . . . . . . . . . . . . . . . . .75  
FDA Consumer Update . . . . . . . . .77  
10 Driver Safety Tips . . . . . . . . . . . .84  
Consumer Information on SAR . .86  
VX5400 7  
Welcome  
Electronics is under license. Other  
trademarks and trade names are those  
of their respective owners.  
Thank you for choosing the VX5400  
cellular phone designed to operate  
with the latest digital mobile  
NOTE Find the interactive user guide on the  
web for your convenience where you  
can freely surf and interactively learn  
how to use your phone step-by-step.  
-> Support -> Phones & Devices ->  
then choose your phone model -> then  
select Equipment Guide.  
communication technology, Code  
Division Multiple Access (CDMA).  
Along with the many advanced  
features of the CDMA system, such as  
greatly enhanced voice clarity, this  
compact phone offers:  
Compact Design  
Large, easy-to-read, 8-line backlit  
LCD with status icons  
®
Get It Now capable for game,  
wallpaper and ringtone downloads  
23-key keypad  
Long battery standby and talk time  
Easy operation using menu-driven  
interface with prompts  
Paging, messaging, Voicemail, and  
caller ID, IM and chat  
Quick calling functions including  
any key answer, auto answer, auto  
retry, 99 speed dials, and voice  
commands  
Bilingual (English and Spanish)  
capabilities  
®
Bluetooth wireless technology (for  
certain profiles)  
®
NOTE The Bluetooth word mark and logos  
are owned by the Bluetooth SIG, Inc.  
and any use of such marks by LG  
8 VX5400  
Technical Details  
keep communication from being  
crossed and to use one frequency  
channel by multiple users in the same  
specific area. This results in a 10-fold  
capacity increase when compared  
with analog mode. In addition,  
features such as soft / softer handoff,  
hard handoff, and dynamic RF power  
control technologies combine to  
reduce call interruptions.  
The Cellular and PCS CDMA networks  
consist of MSO (Mobile Switching  
Office), BSC (Base Station Controller),  
BTS (Base Station Transmission  
System), and MS (Mobile Station).  
* TSB -74: Protocol between an IS-  
95A system and ANSI J-STD-008  
1xRTT system receives twice as many  
subscribers in the wireless section as  
IS-95. Its battery life is twice as long  
as IS-95. High-speed data  
Important Information  
This user’s guide provides important  
information on the use and operation  
of your phone. Please read this guide  
carefully prior to using the phone to  
be able to use your phone to its  
greatest advantage and to prevent  
any accidental damage or misuse.  
Any unapproved changes or  
modifications will void your warranty.  
FCC Part 15 Class B Compliance  
This device and its accessories  
comply with part 15 of FCC rules.  
Operation is subject to the following  
two conditions: (1) This device and its  
accessories may not cause harmful  
interference, and (2) this device and  
its accessories must accept any  
interference received, including  
interference that causes undesired  
operation.  
transmission is also possible.  
The following table lists some major  
CDMA standards.  
Technical Details  
The VX5400 is a tri-mode phone that  
operates on both Code Division  
Multiple Access (CDMA) frequencies:  
Cellular services at 800 MHz and  
Personal Communication Services  
(PCS) at 1.9 GHz.  
CDMA technology uses a feature  
called DSSS (Direct Sequence Spread  
Spectrum) that enables the phone to  
VX5400 9  
Technical Details  
CDMA  
Standard  
Designator  
Description  
TIA/EIA-95A  
TSB-74  
CDMA Tri-Mode Air Interface  
14.4kbps radio link protocol and inter-band  
operations  
Basic Air  
Interface  
ANSI J-STD-008  
TIA/EIA-IS2000  
IS-95 adapted for PCS frequency band CDMA2000  
1xRTT AirInterface  
ANSI TIA/EIA  
Advanced Mobile Phone Service  
553A  
TIA/EIA/IS-634  
TIA/EIA/IS/651  
TIA/EIA/IS-41-C  
TIA/EIA/IS-124  
MAS-BS  
PCSC-RS  
Network  
Intersystem operations  
Non-signaling data comm.  
Speech CODEC  
TIA/EIA/IS-96-B  
TIA/EIA/IS-99  
TIA/EIA/IS-637  
TIA/EIA/IS-657  
IS-801  
Async Data and Fax  
Short message service  
Packet Data  
Service  
Position Determination Service (gpsOne)  
TIA/EIA/IS-707-A  
High Speed Packet Data  
TIA/EIA/IS-97  
Cellular base station  
Cellular mobile station  
PCS personal station  
PCS base station  
TIA/EIA/IS-98  
Performance ANSI J-STD-018  
ANSI J-STD-019  
TIA/EIA/IS-125  
Speech CODEC  
10 VX5400  
FCC RF Exposure Information  
cannot maintain 0.6 inches (1.5 cm)  
distance between the user’s body and  
the back of the phone and have not  
been tested for compliance with FCC  
RF exposure limits.  
WARNING! Read this information  
before operating the phone.  
In August 1996, the Federal  
Communications Commission (FCC) of  
the United States, with its action in  
Report and Order FCC 96-326, adopted  
an updated safety standard for human  
exposure to Radio Frequency (RF)  
electromagnetic energy emitted by  
FCC regulated transmitters. Those  
guidelines are consistent with the  
safety standard previously set by both  
U.S. and international standards  
bodies. The design of this phone  
complies with the FCC guidelines and  
these international standards.  
Vehicle-Mounted External Antenna  
(Optional, if available.)  
To satisfy FCC RF exposure  
requirements, keep 8 inches (20 cm)  
between the user / bystander and  
vehicle-mounted external antenna.  
For more information about RF  
exposure, visit the FCC website at  
Caution  
Use only the supplied antenna. Use of  
unauthorized antennas (or  
modifications to the antenna) could  
impair call quality, damage the phone,  
void your warranty and/or violate FCC  
regulations.  
Don't use the phone with a damaged  
antenna. A damaged antenna could  
cause a minor skin burn.  
Contact your local dealer for a  
replacement antenna.  
Bodily Contact During Operation  
This device was tested for typical use  
with the back of the phone kept 0.6  
inches (1.5 cm) from the body. To  
comply with FCC RF exposure  
requirements, a minimum separation  
distance of 0.6 inches (1.5 cm) must  
be maintained between the user’s  
body and the back of the phone,  
including the antenna, whether  
extended or retracted. Third-party  
belt-clips, holsters, and similar  
accessories containing metallic  
components should not be used.  
Avoid the use of accessories that  
NOTE Internal Antenna (internal antenna  
described as antenna throughout this  
user guide)  
VX5400 11  
Phone Overview  
18. Camera Lens  
1. Earpiece  
2. Flip  
3. LCD Screen  
10. Navigation Keys  
11. Right Soft Key  
12. OK Key  
13. Side Camera Key  
14. Voice Commands Key  
15. Speakerphone Key  
4. Headset Adapter  
Port  
5. Left Soft Key  
6. Side Keys  
7. CLR Key  
16. PWR/END Key  
8. SEND Key  
17. Alphanumeric Keypad  
9. Vibrate Mode Key  
1. Earpiece  
8. SEND Key Use to make or answer calls.  
2. Flip Open to answer an incoming call and close to  
end the call.  
9. Vibrate Mode Key From standby mode*, press and  
hold for about 3 seconds.  
3. LCD Screen Displays messages and indicator icons.  
When the flip is open, Power Save mode  
automatically dims the screen and then darkens it if  
no keys are pressed.  
4. Headset Adapter Port Allows you to plug in an  
optional headset for convenient, hands-free  
conversations.  
10. Navigation Keys Use for quick access to Pictures,  
®
Calendar, Mobile Web 2.0 and Get It Now (by  
default).  
11. Right Soft Key Use to select an action within a  
menu.  
12. OK Key Selects the function displayed at the  
bottom of the LCD between the Left and Right Soft  
Key functions.  
5. Left Soft Key Use to select an action within a menu.  
6. Side Keys Use to adjust the ringer volume in the  
standby mode and the earpiece volume during a  
call.  
7. CLR Key Deletes single spaces or characters with a  
quick press, but press and hold to delete entire  
words. Will also back you out of menus, one level at  
a time.  
13. Side Camera Key Use for quick access to Camera  
function.  
14. Voice Commands Key Use for quick access to  
Voice Commands.  
* Standby mode is when the phone is waiting for input from you.  
No menu is displayed and the phone isn’t performing any action.  
It’s the starting point for all of the instruction steps.  
12 VX5400  
15. Speakerphone Key Use to change to  
speakerphone mode.  
17. Alphanumeric Keypad Use to enter numbers and  
characters and select menu items.  
16. PWR/END Key Use to turn the power on/off and to  
end a call. Also returns to the standby mode.  
18. Camera Lens Used to take a photo. Keep it clean  
for optimal photo quality.  
Rear view  
Battery Cover  
Battery  
Holes for a  
carrying strap  
Battery terminals  
Battery Charging  
Port and  
Cable Connector  
Camera Key  
Voice Commands Key  
NOTES  
It’s important to fully charge the  
battery before using the phone  
for the first time.  
NOTE  
Battery life and signal strength  
are significant factors (among  
others) that affect your phone’s  
ability to send/receive calls.  
Antenna equipped inside  
your phone.  
TIP  
If you hold the phone enclosing the  
upper edge, you may interfere with  
the antenna's ability to receive a  
clear signal which affects call  
quality for voice or data transfer.  
VX5400 13  
Menus Overview  
GET IT NOW  
1. Tunes & Tones  
1. Get New Ringtones  
2. My Ringtones  
3. My Sounds  
2. Pictures  
1. Get New Pictures  
2. My Pictures  
3. Take Picture  
4. PIX Place  
CONTACTS  
1. New Contact  
2. Contact List  
3. Groups  
4. Speed Dials  
5. In Case of Emergency  
6. My Name Card  
RECENT CALLS  
3. Games  
1. Missed  
2. Received  
3. Dialed  
4. News & Info  
5. Tools on the Go  
6. Extras  
4. All  
5. View Timers  
MESSAGING  
SETTINGS & TOOLS  
1. New Message  
2. Inbox  
1. My Account  
2. Tools  
1. Voice Commands  
2. Calculator  
3. Calendar  
4. Alarm Clock  
4.1. Alarm 1  
3. Sent  
4. Drafts  
5. Voicemail  
6. Mobile IM  
7. Email  
8. Chat  
4.2. Alarm 2  
4.3. Alarm 3  
5. Stopwatch  
6. World Clock  
7. Notepad  
8. Ez Tip Calc  
14 VX5400  
3. Bluetooth Menu  
1. Add New Device  
4. Sounds Settings  
1. Master Volume  
2. Call Sounds  
2.1. Call Ringtone  
2.2. Call Vibrate  
3. Alert Sounds  
3.1. TXT Message  
3.2. Picture Message  
3.3. Voicemail  
4. Keypad Volume  
5. Service Alerts  
5.1. ERI  
5.2. Minute Beep  
5.3. Call Connect  
5.4. Charge Complete  
6. Power On/Off  
6.1. Power On  
4. Language  
5. Location  
6. Security  
6.1 Edit Codes  
6.2 Restrictions  
6.3 Phone Lock  
6.4 Lock Phone Now  
6.5 Reset Default  
6.6 Restore Phone  
7. System Select  
8. NAM Select  
9. Auto NAM  
7. Call Settings  
1. Answer Options  
2. Auto Retry  
3. TTY Mode  
4. One Touch Dial  
5. Voice Privacy  
8. Memory  
6.2. Power Off  
5. Display Settings  
1. Banner  
1. Memory Usage  
2. My Pictures  
3. My Sounds  
9. Phone Info  
1. My Number  
2. SW/HW Version  
3. Icon Glossary  
1.1. Personal Banner  
1.2. ERI Banner  
2. Backlight  
2.1. Display  
2.2. Keypad  
Some content in this user guide may  
differ from your phone depending  
on the phone software. Features  
and specifications are subject to  
change without prior notice.  
3. Wallpaper  
3.1 Main Wallpaper  
3.2 Front Wallpaper  
4. Display Themes  
5. Dial Fonts  
6. Clock Format  
6. Phone Settings  
1. Standalone Mode  
2. Set Shortcut Keys  
3. Voice Commands  
Menu Access  
Press  
[MENU] to have access  
to five phone menus.  
VX5400 15  
Getting Started with Your Phone  
Installing the Battery  
Charging the Battery  
Insert the top of the battery into the  
opening on the back of the phone,  
then push the battery down until the  
latch clicks.  
1. Attach the charger to the phone.  
Make sure that the triangle symbol  
faces up when inserting the plug  
into the charger port.  
2. Plug the charger into a wall outlet.  
NOTICE  
Please use only an approved  
charging accessory to charge  
your LG phone.  
Improper handling of the  
charging port, as well as the use  
of an incompatible charger, may  
cause damage to your phone  
and void the warranty.  
Removing the Battery  
Move the battery latch up, and lift the  
battery from the battery compartment.  
NOTICE  
Triangle symbol should  
face up.  
16 VX5400  
Battery Temperature Protection  
Turning the Phone On and Off  
Turning the Phone On  
If the battery gets overheated, the  
phone will automatically turn off.  
When you turn the phone back on, a  
message pops up alerting you that the  
phone was powered off for your  
safety.  
1. Install a charged battery or  
connect the phone to an external  
power source.  
2. Press  
lights up.  
until the LCD screen  
Battery Charge Level  
Turning the Phone Off  
You can find the battery charge level  
at the top right of the LCD screen.  
When the charge level becomes low,  
the battery sensor sounds a warning  
tone, blinks the battery icon, and  
displays a warning message. As the  
charge level approaches empty, the  
phone automatically switches off  
without saving.  
1. Press and hold  
display turns off.  
until the  
Making Calls  
1. Make sure the phone is turned on.  
If not, press  
seconds.  
for about three  
If necessary, enter the lock code.  
Signal Strength  
2. Enter the phone number.  
Call quality depends on the signal  
strength in your area. You can tell how  
much signal strength you have by the  
number of bars next to the signal  
strength icon: the more bars, the  
stronger the signal. If you’re having  
problems with signal quality, move to  
an open area or, when inside a  
3. Press  
4. Press  
.
to end the call.  
NOTE Your phone has a Voice Commands  
feature that also lets you make calls by  
phone number, name, or location.  
Correcting Dialing Mistakes  
building, try moving near a window.  
Press  
once to erase the last  
digit entered, or hold it down for at  
least two seconds to delete all the  
digits.  
VX5400 17  
Getting Started with Your Phone  
Redialing Calls  
Screen Icons  
When the phone is on, the top line of  
the LCD screen displays phone status  
icons.  
1. Press  
number dialed.  
twice to redial the last  
To see the icon glossary, go to MENU  
-> SETTINGS & TOOLS -> Phone  
Info -> Icon Glossary on your phone.  
Receiving Calls  
1. When the phone rings or vibrates,  
there are three ways of answering  
a call, depending on the phone  
setting:  
Flip Open: Open the flip (by  
default).  
Any Key: Press any key (by  
default).  
Auto with Handsfree  
:
The call automatically connects  
when connected to a handsfree  
device.  
NOTE If you press the Left Soft Key  
[Quiet] while the phone is ringing, the  
ringing or vibration is muted for that  
call.  
NOTE If you press the Right Soft Key  
[Ignore] while the phone is ringing and  
unlocked, the call will end or go to  
voicemail.  
2. Press  
to end the call.  
18 VX5400  
Quick Access to Convenient Features  
Vibrate Mode  
Call Waiting  
Sets the phone to vibrate instead of  
ring ( is displayed). To set Vibrate  
Mode press and hold . To return  
During a call, one beep indicates  
another incoming call. Press  
receive the waiting call then press  
to  
to Normal Mode, press and hold  
.
again to switch between calls.  
Voice Commands  
Mute Function  
The Mute Function prevents the  
transmission of your voice to the  
caller. To quickly activate Mute press  
Voice Commands allow you to do  
things by verbal command (e.g., make  
calls, confirm Voicemail, etc.). Press  
the Voice Commands Key and  
follow the prompts to set up your  
voice command(s).  
the Left Soft Key  
unmute press the Left Soft Key  
[Unmute]  
[Mute], then to  
.
NOTE Voice Commands can also be started  
with the designated key on your  
®
Bluetooth device. Please check the  
manual of the Bluetooth device for  
further instructions.  
Volume Quick Adjustment  
®
Quickly adjust ringer and earpiece  
volumes by pressing the upper side  
key to increase and lower key to  
decrease.  
NOTE The earpiece volume can only be  
adjusted during a call and Key Beep  
volume can only be adjusted through  
the Menu.  
NOTE To turn off sounds, press and hold the  
lower side key for 3 seconds when the  
flip is open, then press and hold the  
upper side key to return to normal  
sounds mode.  
VX5400 19  
Entering and Editing Information  
Text Input  
The following key functions are  
available to help with text entry:  
Left Soft Key: Press to  
change text input mode.  
Shift: Press to change case  
(initial cap, caps lock,  
lowercase).  
Next: Press to display other  
matching words in the  
database.  
Space: Press to complete a  
word and insert a space.  
Clear: Press to delete a  
single space or character.  
Hold to delete words.  
Punctuation: Press to insert  
punctuation.  
Text Input Modes  
In a text field, press the Left Soft Key  
to display text modes.  
20 VX5400  
Contacts in Your Phone’s Memory  
Storing Basics  
Speed Dial  
Allows you to set up your Speed Dials.  
1. Enter a number (max. 48 digits),  
then press the Left Soft Key  
1. Press the Right Soft Key  
[Save]  
.
[Contacts], then use the Navigation  
Key  
to scroll to an entry.  
2. Use the Navigation Key  
to  
scroll to Add New Contact/  
2. Press the Left Soft Key  
[Edit]  
.
Update Existing, then press the  
OK Key  
3. Use the Navigation Key  
to a phone number, then press the  
Right Soft Key [Options].  
to scroll  
.
3. Use the Navigation Key  
to  
scroll to Mobile 1/ Home/ Work/  
Mobile 2/ Fax, then press the OK  
4. Use the Navigation Key  
scroll to Set Speed Dial, then  
press the OK Key  
to  
Key  
.
.
4. Enter a name (max. 32 characters),  
5. Enter a Speed Dial digit.  
then press the OK Key  
.
Use the keypad, then press the OK  
5. Press  
to exit,  
to call, or  
Key  
.
the Right Soft Key  
[Options].  
Use the Navigation Key  
to  
scroll to the Speed Dial digit, then  
Customizing Individual  
Entries  
press the OK Key  
.
6. Press the OK Key  
press the OK Key  
Yes, then  
to save.  
1. Press the Right Soft Key  
[Contacts], then Use the Navigation  
Key  
to scroll to an entry.  
Storing a Number with  
Pauses  
Pauses allow you to enter additional  
series of numbers to access  
automated systems such as Voicemail  
or credit billing numbers. Pause types  
are: Wait (W) The phone stops dialing  
until you press the Left Soft Key  
2. Press the Left Soft Key  
[Edit]  
.
3. Use the Navigation Key  
scroll to the information to  
customize.  
to  
4. Change the entry as you want, then  
press the OK Key  
changes.  
to save your  
VX5400 21  
Contacts in Your Phone’s Memory  
[Release] to advance to the next  
scroll to Update Existing, then  
press the OK Key  
number. 2-Sec Pause (P) The phone  
waits two seconds before sending the  
next string of digits.  
.
3. Use the Navigation Key  
scroll to an existing entry, then  
press the OK Key  
to  
1. Enter the number, then press the  
.
Right Soft Key  
[Options]  
.
4. Use the Navigation Key  
to  
2. Use the Navigation Key  
to  
scroll to Mobile 1/ Home/ Work/  
Mobile 2/ Fax, then press the OK  
scroll to 2-Sec Pause/ Wait, then  
press the OK Key  
.
Key  
to save.  
3. Enter additional number(s) (e.g., pin  
number, credit card number, etc.).  
From the Contact List Screen  
1. Press the Right Soft Key  
4. Press the Left Soft Key  
[Save].  
[Contacts].  
5. Use the Navigation Key  
to  
2. Use the Navigation Key  
to  
scroll to Add New Contact or  
scroll to an entry, then press the  
Left Soft Key [Edit]  
Update Existing and press the OK  
.
Key  
.
3. Use the Navigation Key  
to  
6. Use the Navigation Key  
to  
scroll to the phone number field to  
add, then enter the number and  
scroll to Mobile 1/ Home/ Work/  
Mobile 2/ Fax, then press the OK  
press the OK Key  
to save.  
Key  
7. Enter a name, then press the OK  
Key  
.
Changing Saved Information  
.
To edit any information you stored,  
access the Edit Contacts screen:  
Adding Another Phone  
Number  
1. Press the Right Soft Key  
[Contacts].  
From standby mode  
2. Use the Navigation Key  
scroll to a Contact entry, then press  
the Left Soft Key [Edit]  
to  
1. Enter a phone number, then press  
the Left Soft Key  
.
[Save].  
3. Use the Navigation Key  
to  
2. Use the Navigation Key  
to  
22 VX5400  
scroll to the field you want to  
change.  
Key  
3. While viewing a Contact, press the  
OK Key to edit.  
4. Use the Navigation Key  
.
4. Make the changes, then press the  
OK Key  
.
to  
highlight a phone number, then  
press the Right Soft Key  
[Options].  
Adding a Pause to a Contact Entry  
1. Press the Right Soft Key  
[Contacts].  
5. Use the Navigation Key  
to  
2. Use the Navigation Key  
scroll to a Contact entry, then press  
the Left Soft Key [Edit]  
to  
highlight Set As Default, then  
press the OK Key  
.
.
6. Press the OK Key  
to set the  
3. Use the Navigation Key  
scroll to the number, then press the  
Right Soft Key [Options]  
to  
new number as the default.  
A confirmation message is  
displayed.  
.
4. Press Add Pause  
5. Press Wait or  
Pause  
6. Enter additional number(s), then  
press the OK Key  
.
7. Press the OK Key  
save.  
again to  
2-Sec  
.
Deleting  
Deleting a Phone Number  
.
1. Press the Right Soft Key  
[Contacts].  
Changing the Default  
Number  
The Default Number is the phone  
number you entered when you  
created the Contact. Another number  
can be saved as the Default Number.  
2. Use the Navigation Key  
scroll to an entry.  
to  
[VIEW]  
3. Press the OK Key  
.
4. Use the Navigation Key  
scroll to a phone number.  
to  
1. Press the Right Soft Key  
[Contacts].  
5. Press the Left Soft Key  
[Erase]  
.
2. Use the Navigation Key  
to  
scroll to an entry and press the OK  
6. Select Yes  
.
VX5400 23  
Contacts in Your Phone’s Memory  
Deleting a Contact Entry  
Speed Dialing  
Allows you to make phone calls  
quickly and easily to numbers stored  
in Contacts. You need to set Speed  
Dials in your Contacts before using  
this feature.  
1. Press the Right Soft Key  
[Contacts].  
2. Use the Navigation Key  
scroll to an entry.  
to  
3. Press the Right Soft Key  
[Options], then press  
NOTE Speed Dial 1 is for Voicemail.  
Erase.  
Speed Dials From 1 to 9  
4. Press the OK Key  
Yes.  
Press and hold the Speed Dial digit.  
Your phone recalls the phone number  
from your Contacts, displays it briefly,  
and then dials it.  
Deleting a Speed Dial  
1. Press the Right Soft Key  
[Contacts].  
2. Use the Navigation Key  
to  
Speed Dials From 10 to 99  
highlight a Contact entry to edit  
Press the first Speed Dial digit, then  
press and hold the key of the last  
Speed Dial digit.  
and press the OK Key  
[VIEW].  
3. Select the phone number with the  
Speed Dial, then press the OK Key  
NOTE You can also enter the Speed Dial  
[EDIT]  
.
digit(s), then press  
.
4. Press the Right Soft Key  
[Options].  
Speed Dials 97, 98, and 99  
Speed Dials 97, 98, and 99 are preset  
to access certain phone account  
information: 97 (#BAL), 98 (#MIN), and  
99 (#PMT). Unlike Speed Dial 1, these  
can be changed if you want.  
5. Press  
Remove Speed Dial.  
6. Press the OK Key  
Yes.  
24 VX5400  
GET IT NOW  
Access and Options  
1. Press the OK Key  
2. Press the Navigation Key  
twice to scroll to GET IT NOW  
3. Press Tunes & Tones  
GET IT NOW  
Get It Now allows you to do more  
[MENU]  
.
®
than just talk on your phone. Get It  
Now is a technology and service that  
allows you to download and use  
applications on your phone. With Get  
It Now, it’s quick and easy to  
personalize your phone to your  
lifestyle and tastes. Just download the  
applications that appeal to you. With a  
wide range of software available, from  
ringtones to games to productivity  
tools, you can be assured that you can  
find something useful, practical, or  
entertaining.  
.
.
4. Select a submenu by pressing the  
number that corresponds with the  
submenu.  
1.1 Get New Ringtones  
Allows you to connect to Get It Now  
and download various ringtones.  
1. Press the OK Key  
2. Press the Navigation Key  
twice to scroll to GET IT NOW  
[MENU].  
SHORTCUT You can access the Get It Now  
.
feature directly by pressing the  
Navigation Key  
to the right.  
3. Press  
4. Press  
5. Press  
[Tunes & Tones]  
[Get New Ringtones]  
[Get New App]  
.
Anything Unclear?  
From the Get It Now menu, press the  
Right Soft Key [Info] to see your  
.
.
memory status, activity log, help text,  
and Get It Now status. Use the Help  
option to view information from buying  
new applications to expired applications.  
1.2 My Ringtones  
Allows you to select a desired  
ringtone, download a new ringtone.  
1. Press the OK Key [MENU]  
2. Press the Navigation Key  
twice to scroll to GET IT NOW  
.
1. Tunes & Tones  
Personalize your phone with  
.
ringtones. A wide variety of choices  
are available to choose from current  
hits, pop, hip-hop, and more.  
3. Press  
4. Press  
[Tunes & Tones]  
.
[My Ringtones]  
.
VX5400 25  
GET IT NOW  
5. Use the Navigation Key  
highlight a ringtone and press the  
to  
Press the Right Soft Key  
[Options] to scroll to:  
Left Soft Key  
[Set As]  
.
Send/ To PIX Place/ Rename/  
Lock/ Erase All/ File Info  
Ringtone  
Contact ID: Scroll and  
select the Contact to be identified  
by the ringtone you selected.  
2. Pictures  
View and take your digital pictures  
right from your wireless phone.  
Alert Sounds: Press the  
corresponding number key to set  
the ringtone for one of the following:  
SHORTCUT Pressing the Navigation Key  
to the Left is a hot key  
to PICTURES.  
All Messages/ TXT Message/  
Picture Message/ Voicemail  
Access and Options  
1. Press the OK Key  
[MENU]  
.
1.3 My Sounds  
Allows you to select a desired sound  
or record a new sound.  
2. Press the Navigation Key  
twice to scroll to GET IT NOW  
.
3. Press  
Pictures.  
1. Press the OK Key  
2. Press the Navigation Key  
twice to scroll to GET IT NOW  
[MENU].  
4. Select a submenu.  
.
2.1 Get New Pictures  
3. Press  
4. Press  
5. Press  
[Tunes & Tones]  
[My Sounds]  
Record New or scroll  
.
Allows you to connect to Get It Now  
and download a variety of images for  
My Pictures.  
.
1. Press the OK Key  
2. Press the Navigation Key  
twice to scroll to GET IT NOW  
[MENU].  
and select a sound using the  
Navigation Key  
.
.
Options from here:  
3. Press  
4. Press  
5. Press  
[Pictures]  
[Get New Pictures]  
[Get New App]  
.
Press the Left Soft Key  
[Erase]  
.
.
Press the OK Key  
[PLAY]  
.
.
26 VX5400  
2.2 My Pictures  
2.3 Take Picture  
Allows you to view photos stored in  
the phone.  
Take pictures  
straight from  
your phone.  
1. Press the OK Key  
2. Press the Navigation Key  
twice to scroll to GET IT NOW  
[MENU].  
1. Press the OK  
Key  
.
[MENU]  
.
3. Press  
4. Press  
[Pictures]  
.
2. Press the  
Navigation Key  
[My Pictures]  
.
twice to scroll  
to GET IT NOW  
3. Press [Pictures]  
[Take Picture]  
.
5. Use the Navigation key  
highlight a picture and press the  
Right Soft Key [Options]  
to  
.
.
4. Press  
.
6. Select one of the following options:  
Send Select As Picture  
SHORTCUT  
The Side Camera Key ( ) is a shortcut key to  
Take Picture in standby mode when the flip is  
open.  
Message To PIX Place.  
/
Set As Wallpaper/ Picture ID  
Take Picture Turns on the camera  
function.  
5. Set the brightness by pressing the  
Navigation Key  
, then by  
Get New Pictures Downloads  
various pictures.  
Manage My Pics Allows you to  
mark the selected picture and  
apply options.  
pressing the Navigation Key right or  
left to adjust the setting. You can  
also zoom in and out by pressing  
the Navigation Key  
Right Soft Key  
. Press the  
[Options] to  
change other settings.  
Rename Renames the selected  
picture.  
Select the option(s) to customize.  
File Info Name/ Date/ Time/  
Resolution/ Size/ Type  
Resolution 640X480/ 320X240/  
160X120  
Self Timer Off/ 3 Seconds/  
5 Seconds/ 10 Seconds  
Brightness  
VX5400 27  
GET IT NOW  
White Balance Auto/ Sunny/  
twice to scroll to GET IT NOW  
.
Cloudy/ Tungsten/ Fluorescent  
Shutter Sound Shutter/ No Sound  
/Say “Cheeze”/ Ready! 1 2 3  
Color Effects Normal/ Sepia/  
Black&White/ Negative/ Vivid  
3. Press  
[Games].  
4. Press the OK Key  
App].  
[Get New  
Night Mode On/ Off  
Front Display On/Off  
4. News & Info  
The News & Info feature allows you to  
access news, sports, weather, and  
email from your Verizon Wireless  
device. Access and selections within  
this feature are dependent upon your  
service provider. For specific  
6. Take a picture by pressing the OK  
Key  
7. Press the Left Soft Key  
The picture is stored in My Pics  
[TAKE].  
[Save]  
.
.
information on News & Info access  
through your phone, contact your  
service provider.  
2.4 PIX Place  
Use to access the Online Album (PIX  
Place).  
SHORTCUT Pressing the Navigation Key  
Up is the shortcut to  
1. Press the OK Key  
2. Press the Navigation Key  
twice to scroll to GET IT NOW  
[MENU].  
accessing Mobile Web 2.0.  
1. Press the OK Key  
[MENU].  
.
2. Press the Navigation Key  
twice to scroll to GET IT NOW.  
3. Press  
4. Press  
[Pictures]  
.
[PIX Place]  
.
3. Press  
[News & Info].  
Ending a Browser Session  
End a Browser session by pressing  
.
3. Games  
Allows you to download games and  
applications from the Get It Now  
Navigating Through the Browser  
On-screen items appear in one of the  
following ways:  
server. Choose the software you want  
from the list displayed on the screen.  
1. Press the OK Key  
[MENU].  
Numbered options  
2. Press the Navigation Key  
You can use your numeric keypad  
28 VX5400  
or you can select the items by  
moving the cursor and pressing the  
appropriate Soft Keys.  
Soft Keys  
To navigate to different screens or  
select special functions, use the Soft  
Keys. The function associated with  
the Soft Keys can change for each  
page and depends on each  
highlighted item.  
Links embedded in content  
You can act on the options or the  
links using the Soft Keys just below  
the display screen.  
Left Soft Key  
Left Soft Key  
options or selecting an item but its  
function may change, depending on  
the content displayed.  
Text or numbers  
is used primarily for  
You can select the items by moving  
the cursor and pressing the  
appropriate Soft Keys.  
Scrolling  
Use the Navigation Key  
through the content. A cursor lets you  
know which item is currently  
selected.  
Right Soft Key  
Right Soft Key  
for secondary options or a menu of  
secondary options.  
to scroll  
is used primarily  
Entering Text, Numbers, or Symbols  
When prompted to enter text, the  
current text entry method appears  
Fast Scrolling  
Press and hold the Navigation Key  
to quickly move the cursor up  
and down on the current screen.  
above the Right Soft Key  
Word Abc ABC 123 or Symbols  
To change the input mode, press the  
Left Soft Key . To create an upper  
case character, press  
as  
,
,
,
.
Scrolling by Page  
Press the Side Keys to move up and  
down a page at a time.  
.
Deleting Text/Number Entered  
When entering text or numbers, press  
to clear the last number, letter,  
Home Page  
To go to the Home Page, press and  
hold  
or  
.
or symbol. Press and hold  
clear the input field completely.  
to  
View Browser Menu  
Press Voice Commands key to use  
the Browser menu.  
VX5400 29  
GET IT NOW  
Initiating a Phone Call From the  
Browser  
6. Extras  
1. Press the OK Key  
[MENU]  
.
You can make a phone call from the  
Browser if the site you are using  
supports the feature (the phone number  
may be highlighted and Left Soft Key  
appears as Call). The browser  
connection is terminated when you  
initiate the call. After you end the call,  
your phone returns to the screen from  
which you initiated the call.  
2. Press the Navigation Key  
twice to scroll to GET IT NOW  
.
3. Press [Extras]  
.
4. Press the OK Key  
App].  
[Get New  
5. Tools on the Go  
Everything you need to know while  
you’re on the go.  
1. Press the OK Key  
2. Press the Navigation Key  
twice to scroll to GET IT NOW  
3. Press [Tools on the Go]  
[MENU].  
.
.
4. Press the OK Key  
[Get New  
App].  
30 VX5400  
MESSAGING  
message, the icon will flash and a  
warning message is displayed.  
MESSAGING  
SHORTCUT From standby mode, pressing  
NOTE If you receive the same message  
twice, your phone deletes the older  
one and the new one is stored as a  
DUPLICATE.  
the Left Soft Key  
is a hot  
key to your MESSAGING.  
Text messages, Picture messages,  
and the Voicemail box become  
available as soon as the phone is  
powered on.  
1. New Message  
Allows you to send messages (TXT,  
Picture) and pages. Each message has  
a destination (Address) and information  
(Message). These are dependent upon  
the type of message you want to send.  
Check types of messages by  
pressing the Left Soft Key  
[Message]  
.
Make a call to the callback number  
(in Inbox) by pressing  
a message check.  
during  
1.1 TXT Message  
The Basics of Sending a Message  
The phone can store over 400  
messages. The information stored in  
the message is determined by phone  
mode and service capability. Other  
limits to available characters per  
message may exist. Please check  
with your service provider for system  
features and capabilities.  
1. Press the OK Key  
[MENU].  
2. Press the Navigation Key  
scroll to MESSAGING.  
to  
3. Press  
4. Press  
[New Message].  
[TXT Message].  
5. Enter the phone number of the  
recipient or the email address for  
an email message. You can enter  
up to 10 addresses for a single  
message.  
New Message Alert  
There are two ways your phone alerts  
you to new messages.  
1. The phone displays a message on  
the screen.  
2. The message icon (  
) is  
displayed on the display screen. In  
the case of a high priority  
VX5400 31  
MESSAGING  
6. Press the Navigation Key  
downward.  
Callback # Inserts a pre-  
programmed callback number with  
your message.  
On/ Off/ Edit  
Save Quick Text Allows you to  
define phrases for Quick Text.  
7. Type your message (text or email).  
8. Press the OK Key  
[SEND].  
A sending screen is displayed.  
Cancel Message Cancels  
message editing and goes to  
Message menu.  
Customizing the Message Using  
Options  
Editing the To: field  
3. Complete and then send or save  
the message.  
1. Press the Right Soft Key  
[Add].  
2. Select the option(s) to customize.  
From Contacts/ Recent Calls/  
Groups/ To Contacts  
1.2 Picture Message  
The Basics of Sending a Message  
Editing Text  
1. Press the Left Soft Key  
1. Press the Right Soft Key  
[Options].  
[Message]  
2. Press  
3. Press  
.
New Message  
.
2. Select the option(s) to customize.  
[Picture Message]  
.
Save As Draft Saves the message  
into the Drafts folder.  
Add Allows you to add Graphic,  
Animation, Sound, Quick Text,  
Signature, Name Card, or Address  
From Contacts.  
4. Enter the cellular phone number or  
email address of the recipient.  
5. Press the Navigation Key  
downward.  
6. Type your message (text or email).  
Format Text Allows you to change  
the look of the text.  
Alignment/ Font Size/ Font Style/  
Text Color/ Background  
Priority Level Gives priority to the  
message.  
7. Use the Navigation Key  
highlight Picture and press the Left  
Soft Key [My Pics]. Use the  
Navigation Key to scroll to the  
image you want to send, then  
press the OK Key  
to  
.
High/ Normal  
32 VX5400  
8. Use the Navigation Key  
highlight Sounds, then press the  
Left Soft Key [Sounds]. Use  
the Navigation Key to scroll to  
the audio file you want to send  
to  
Editing Text  
1. Press the Right Soft Key  
[Options]  
.
2. Select the option(s) to customize.  
then press the OK Key  
.
Preview Displays the Picture  
message as it would be seen by  
the recipient.  
9. Use the Navigation Key  
highlight Name Card, then press  
to  
the Left Soft Key  
the Navigation Key  
[Add]. Use  
to scroll to  
Save As Draft Saves the message  
into the Drafts folder.  
the Name Card you want to send  
then press  
Add Quick Text Inserts predefined  
phrases.  
.
Add Slide Insert multiple pictures  
into a picture message.  
10.Use the Navigation Key  
highlight Subject and enter the  
to  
subject.  
Priority Level Gives priority to the  
message.  
High/ Normal  
11.Press the OK Key  
A confirmation message is  
displayed.  
[SEND].  
Cancel Message  
Editing Picture  
Customizing the Message Using  
Options  
1. Press the Right Soft Key  
[Options].  
Editing the To: field  
2. Select the option(s) to customize.  
Preview/ Save As Draft/ Add  
Slide/ Priority Level/ Remove  
Picture/ Cancel Message  
1. Press the Right Soft Key  
[Add].  
2. Select the option(s) to customize.  
From Contacts/ Recent Calls/  
Groups/ To PIX Place/ To  
Contacts  
Editing Sounds  
1. Press the Right Soft Key  
[Options].  
2. Select the option(s) to customize.  
Preview/ Save As Draft/  
VX5400 33  
MESSAGING  
Add Slide/ Priority Level/  
Viewing Your Inbox  
Remove Sound/ Cancel Message  
1. Press the OK Key  
[MENU]  
.
Editing Name Card  
2. Press the Navigation Key  
scroll to MESSAGING  
to  
.
1. Press the Right Soft Key  
[Options].  
3. Press [Inbox]  
.
2. Select the option(s) to customize.  
Preview/ Save As Draft/ Add  
Slide/ Priority Level/ Remove  
Name Card/ Cancel Message  
4. Options from here:  
Press the Left Soft Key  
[Erase].  
Press the Right Soft Key  
Editing Subject  
[Options]  
.
Reply Replies to the origination  
address of the received message.  
1. Press the Right Soft Key  
[Options].  
Forward Forwards a received  
message to other destination  
address(es).  
Lock/Unlock Locks or unlocks the  
selected message. Locked  
messages cannot be deleted by  
the Erase Inbox and Erase All  
functions.  
2. Select the option(s) to customize.  
Preview/ Save As Draft/ Add  
Quick Text/ Add Slide/ Priority  
Level/ Cancel Message  
3. Complete and then send or save  
the message.  
Add To Contacts Stores the  
callback number, email address,  
and numbers from the address of  
the received message into your  
Contacts.  
Erase Inbox Erases all read,  
unlocked messages stored in the  
Inbox.  
2. Inbox  
The phone alerts you in 3 ways when  
you receive a new message:  
By displaying a message  
notification on the screen.  
By sounding a sound or vibration, if  
set.  
Message Info Allows you to check  
the received message information.  
By blinking  
a high priority message).  
(only when you get  
34 VX5400  
Message Icon Reference  
New/Unread TXT Messages  
Press the Right Soft Key  
[Options].  
Forward Forwards a sent message  
to other destination address(es).  
Send Allows you to retransmit the  
selected message. For multimedia  
messages, ‘Resend’ is displayed.  
Lock/Unlock Locks or unlocks the  
selected message. Locked  
messages cannot be deleted by  
the Erase Sent and Erase All  
functions.  
Add To Contacts Stores the  
callback number, email address,  
and numbers from the address of  
the received message into your  
Contacts.  
Opened/Read TXT Messages  
Priority High  
Locked  
New/Unread Picture  
Messages  
Open/Read Picture  
Messages  
New/Unread Browser  
Messages  
Opened/Read Browser  
Messages  
Erase Sent Erase all unlocked  
messages stored in the Sent  
messages.  
Message Info Allows you to check  
the sent message information.  
3. Sent  
You can save up to 100 sent  
messages. This menu lists your Sent  
messages. Use it to verify whether the  
transmission was successful or not  
and view message contents.  
Message Icon Reference  
1. Press the OK Key  
2. Press the Navigation Key  
scroll to MESSAGING  
3. Press [Sent]  
[MENU]  
.
Text/Picture Messages sent  
to  
Message delivered  
.
Text/Picture Messages failed  
Multiple Messages sent  
Multiple Messages delivered  
Multiple Messages failed  
.
4. Options from here:  
Press the Left Soft Key  
[Erase]  
.
VX5400 35  
MESSAGING  
Multiple Messages  
Message Icon Reference  
incomplete  
Priority High  
Locked  
Draft Text  
Draft Picture  
5. Voicemail  
4. Drafts  
Displays draft messages.  
Allows you to view the number of new  
voice messages recorded in the  
Voicemail box. Once you exceed the  
storage limit, old messages are  
overwritten. When you have a new  
voice message, your phone will alert  
you.  
1. Press the OK Key  
[MENU]  
.
2. Press the Navigation Key  
scroll to MESSAGING  
to  
.
3. Press [Drafts]  
.
Checking Your Voicemail Box  
4. Options from here:  
1. Press the OK Key  
2. Press the Navigation Key  
scroll to MESSAGING  
3. Press [Voicemail]  
[MENU]  
.
Press the Left Soft Key  
[Erase]  
.
to  
.
Press the Right Soft Key  
[Options]  
.
.
Send Sends the selected  
message.  
4. Options from here:  
Press the Left Soft Key  
[Clear]  
Lock/Unlock Locked messages  
cannot be deleted by the Erase  
Drafts and Erase All functions.  
to delete information, and then  
press the OK Key [Yes].  
Press  
or the OK Key  
Add To Contacts Stores the  
callback number, email address,  
and numbers from the address  
included in the Draft message into  
your Contacts.  
[CALL] to listen to the message(s).  
OR  
1. Dial *86 (*VM) Send from your  
phone or dial your wireless phone  
number from any touch-tone phone  
Erase Drafts Erases all unlocked  
Draft messages.  
36 VX5400  
2. When the recorded announcement  
begins, press # to interrupt (if  
applicable).  
8. Chat  
Allows you to chat with Internet  
Messenger users.  
3. An easy-to-follow setup tutorial will  
begin. Follow the instructions to set  
up your new password and record  
a greeting.  
1. Press the OK Key  
[MENU].  
2. Press the Navigation Key  
scroll to MESSAGING  
to  
.
3. Press [Chat]  
.
4. A Mobile Web Browser session  
starts.  
6. Mobile IM  
Allows you to send and receive an  
Instant Message at any time.  
5. Scroll to an email provider and  
press the OK Key  
.
1. Press the OK Key  
2. Press the Navigation Key  
scroll to MESSAGING  
[MENU].  
6. Login or enter your email address  
and password.  
to  
.
3. Press  
[Mobile IM].  
7. Email  
Allows you to send an email via  
Mobile Web.  
1. Press the OK Key  
[MENU].  
2. Press the Navigation Key  
to  
scroll to MESSAGING  
.
3. Press [Email]  
.
4. A Mobile Web Browser session  
starts.  
5. Scroll to an email provider and  
press the OK Key  
.
6. Login or enter your email address  
and password.  
VX5400 37  
MESSAGING  
4. TXT Auto View (On/ Off)  
MSG Settings  
Allows you to directly display the  
content when receiving a message.  
Allows you to configure settings for  
your messages.  
1. Press the OK Key  
2. Press the Navigation Key  
scroll to MESSAGING  
3. Press the Left Soft Key  
[Settings]  
4. Use the Navigation Key  
highlight one of the settings and  
press the OK Key to select it.  
[MENU].  
5. TXT Auto Play (On/ Off)  
to  
Allows the display to automatically  
scroll down while viewing messages.  
.
6. Pic Auto Receive (On/ Off)  
.
Allows you to directly download the  
content when receiving a Picture  
message.  
to  
Message Settings Sub-Menu  
Descriptions  
7. Quick Text  
Allows you to display, edit, and add  
text phrases. These text strings allow  
you to reduce manual text input into  
messages.  
1. Entry Mode (Word/ Abc/ ABC/ 123)  
Allows you to select the default input  
method including Word, Abc, ABC,  
123.  
8. Voicemail #  
Allows you to manually enter the  
access number for Voicemail Service.  
This number should be only used  
when a VMS (Voicemail Service)  
access number is not provided from  
the network.  
2. Auto Save (On/ Off/ Prompt)  
With this feature on, messages are  
automatically saved in the Sent folder  
when transmitted.  
3. Auto Erase (On/ Off)  
9. Callback # (On/ Off)  
With this feature on, read messages  
are automatically deleted when you  
exceed the storage limit.  
Allows you to automatically send a  
designated callback number when  
you send a message.  
38 VX5400  
10. Signature (None/ Custom)  
4. Select an option in the on-screen  
instruction.  
Allows you make/edit a signature to  
automatically send with your  
messages.  
A confirmation message is  
displayed.  
Erasing Messages  
Allows you to erase all messages  
stored in your Inbox, Sent, or Drafts  
folders. You can also erase all  
messages at the same time.  
1. Press the OK Key  
2. Press the Navigation Key  
scroll to MESSAGING  
3. Press the Right Soft Key  
[Options]  
[MENU]  
.
to  
.
.
Press  
Erase Inbox to  
erase all messages (read or  
unread) or only read messages  
in the Inbox.  
Press  
Erase Sent to  
erase all unlocked messages  
stored in the Sent folder.  
Press  
Erase Drafts to  
erase all unlocked messages  
stored in the Drafts folder.  
Press  
Erase All to erase  
all read messages stored in the  
Inbox, Sent, and Drafts folder  
(including unread, except  
locked messages).  
VX5400 39  
CONTACTS  
2. Contact List  
Allows you to view your Contacts List.  
CONTACTS  
The Contacts Menu allows you to  
store names, phone numbers and  
other information in your phone’s  
memory.  
1. Press the OK Key  
[MENU]  
.
2. Press  
[Contact List]  
.
3. Press the Navigation Key  
scroll through your Contacts  
alphabetically.  
to  
SHORTCUT Pressing the Right Soft Key  
is a hot key to Contacts List.  
Press the Right Soft Key  
1. New Contact  
Allows you to add a new number to  
your Contacts List.  
[Options] to select one of the  
following:  
New Contact/ Erase/ New TXT  
Message/ New Picture  
Message/ Set As ICE Contact/  
Call/ Erase All/ Send Name  
Card  
NOTE Using this submenu, the number is  
saved as a new Contact. To save the  
number into an existing Contact, edit  
the Contact entry.  
1. Press the OK Key  
2. Press [New Contact]  
3. Enter the name and press the  
[MENU].  
Press the Left Soft Key  
[Edit] to edit.  
.
Press the OK Key  
[VIEW] to  
Navigation Key  
downward.  
view the Contact information.  
4. Use the Navigation Key  
to  
scroll to the phone number type.  
3. Groups  
5. Enter the number and press the OK  
Allows you to view your grouped  
Contacts, add a new group, change  
the name of a group, delete a group,  
or send a message to everyone in the  
selected group.  
Key  
.
NOTE For more detailed information, see  
page 21.  
1. Press the OK Key  
[MENU].  
2. Press  
[Groups].  
Press the Left Soft Key  
40 VX5400  
[New] to add a new group to  
the list.  
the OK Key  
5. Use the Navigation Key  
highlight the number then press the  
OK Key  
6. Press the OK Key  
.
to  
Use the Navigation Key  
to  
highlight a group then press the  
.
Right Soft Key  
[Options] to  
[Yes]  
.
select one of the following:  
New TXT Message/ New  
Picture Message/ Rename/  
Erase/ Add/ Send Name Card  
A confirmation message is  
displayed.  
*
5. In Case of Emergency  
(ICE)  
Press the OK Key  
view the Group information.  
[VIEW] to  
This menu allows you to store names,  
phone numbers and other information,  
which will be very helpful in case of  
emergency. Also, it allows you to  
read, add, edit, or erase the notes  
yourself as necessary in case an  
emergency takes place.  
3. Use the Navigation Key to  
highlight a group to view then  
press the OK Key  
.
* This option is displayed and available  
only when at least one or more  
contacts are stored in your Groups.  
1. Press the OK Key  
2. Press [In Case of  
Emergency].  
3. Use the Navigation Key  
highlight Contact 1, 2, or 3, then  
press the OK Key [ADD].  
4. Press to add Contact from  
your Contacts List.  
Highlight the Contact, then press  
the OK Key  
[MENU].  
4. Speed Dials  
Allows you to view your list of Speed  
Dials or designate Speed Dials for  
numbers entered in your Contacts.  
to  
1. Press the OK Key  
[MENU]  
.
2. Press  
[Speed Dials]  
.
3. Use the Navigation Key  
highlight the Speed Dial position, or  
enter the Speed Dial digit and  
press the OK Key  
4. Use the Navigation Key  
highlight the Contact then press  
to  
.
.
ICE Contact Assigned is displayed.  
OR  
to  
VX5400 41  
CONTACTS  
Press  
to enter information  
3. Use the Navigation Key  
highlight the information you  
to  
not stored in your Contacts List.  
want to enter, then press the OK  
Key [EDIT].  
5. The generic Contact label changes  
to the specified name.  
4. Enter your information as  
necessary, then press the OK Key  
.
Entering Your ICE Personal Info  
1. Press the OK Key  
2. Press [In Case of  
Emergency].  
3. Select Personal Info, then press  
the OK Key  
4. Select one of the Note entries, then  
press the OK Key  
[MENU].  
5. Send your name card using the  
Right Soft Key  
[Options].  
.
.
5. Enter information that would be  
helpful in an emergency (e.g., your  
medical record number), then  
press the OK Key  
.
TIP  
When you've assigned ICE Contacts  
and your phone is locked, the Left Soft  
Key  
appears as [ICE] allowing the  
emergency information to be viewed  
without unlocking the phone.  
6. My Name Card  
Allows you to view all of your  
personal Contact information  
including name, phone numbers, and  
email address.  
1. Press the OK Key  
[MENU].  
2. Press  
[My Name Card].  
42 VX5400  
RECENT CALLS  
Press the Left Soft Key  
[Message] to select:  
New TXT Message/ New  
Picture Message  
RECENT CALLS  
The Recent Calls Menu is a list of the  
last phone numbers or Contact entries  
for calls you placed, accepted, or  
missed. It's continually updated as new  
numbers are added to the beginning of  
the list and the oldest entries are  
2. Received  
Allows you to view the list of incoming  
calls; up to 90 entries.  
removed from the bottom of the list.  
1. Press the OK Key  
2. Press the Navigation Key  
scroll to RECENT CALLS  
3. Press [Received].  
[MENU]  
1. Missed  
Allows you to view the list of missed  
calls; up to 90 entries.  
to  
.
1. Press the OK Key  
2. Press the Navigation Key  
scroll to RECENT CALLS  
3. Press [Missed]  
[MENU].  
4. Use the Navigation Key  
highlight an entry, then  
to  
to  
.
Press the OK Key  
to view  
.
the entry.  
4. Use the Navigation Key  
highlight an entry, then  
to  
to view  
Press  
the number.  
to place a call to  
Press the OK Key  
Press the Right Soft Key  
[Options] to select:  
Save(Details)/ Erase/  
Lock(Unlock)/ Erase All/  
View Timers  
the entry.  
Press  
to place a call to  
the number.  
Press the Right Soft Key  
[Options] to select:  
Save(Details)/ Erase/  
Lock(Unlock)/ Erase All/  
View Timers  
Press the Left Soft Key  
[Message] to select:  
New TXT Message/ New  
Picture Message  
VX5400 43  
RECENT CALLS  
3. Dialed  
4. All  
Allows you to view the list of outgoing  
calls; up to 90 entries.  
Allows you to view the list of all calls;  
up to 270 entries.  
1. Press the OK Key  
2. Press the Navigation Key  
scroll to RECENT CALLS  
3. Press [Dialed]  
[MENU]  
.
1. Press the OK Key  
2. Press the Navigation Key  
scroll to RECENT CALLS  
3. Press [All]  
[MENU].  
to  
to  
.
.
.
.
4. Use the Navigation Key  
highlight an entry, then  
to  
4. Use the Navigation Key  
highlight an entry, then  
to  
to view  
Press the OK Key  
to view  
Press the OK Key  
the entry.  
the entry.  
Press  
to place a call to  
Press  
to place a call to  
the number.  
the number.  
Press the Right Soft Key  
[Options] to select:  
Save(Details)/ Erase/  
Lock(Unlock)/ Erase All/  
View Timers  
Press the Right Soft Key  
[Options] to select:  
Save(Details)/ Erase/  
Lock(Unlock)/ Erase All/  
View Timers  
Press the Left Soft Key  
[Message] to select:  
New TXT Message/ New  
Picture Message  
Press the Left Soft Key  
[Message] to select:  
New TXT Message/ New  
Picture Message  
SHORTCUT To view a quick list of all your  
recent calls, press  
standby mode.  
from  
44 VX5400  
5. View Timers  
Allows you to view the duration of  
selected calls.  
1. Press the OK Key  
2. Press the Navigation Key  
scroll to RECENT CALLS  
3. Press [View Timers]  
[MENU].  
to  
.
.
4. Use the Navigation Key  
highlight a call list.  
to  
Last Call/ All Calls/ Received Calls/  
Dialed Calls/ Roaming Calls/  
Transmit Data/ Received Data/  
Total Data/ Last Reset/ Lifetime  
Calls/ Lifetime Data  
5. Reset all the recorded timers by  
pressing the Right Soft Key  
[Reset All] if you want to reset.  
VX5400 45  
SETTINGS & TOOLS  
to scroll to SETTINGS & TOOLS  
.
SETTINGS & TOOLS  
3. Press  
[Tools]  
.
4. Press  
[Voice Commands]  
.
1. My Account  
Settings to Optimize the Voice  
Commands Feature by pressing the  
Right Soft Key [Settings]  
Check your subscription information  
ranging from your payment plan to  
your software upgrade or other  
available service.  
Choice List Automatic/ Always On/  
Always Off  
1. Press the OK Key  
[MENU]  
.
Sensitivity Control the sensitivity as  
Reject More/ Automatic/ Reject  
2. Press the Navigation Key  
to scroll to SETTINGS & TOOLS  
twice  
.
Less  
.
3. Press  
[My Account].  
Train Voice If the phone often asks  
you to repeat voice command, train  
the phone to recognize your voice  
patterns.  
2. Tools  
Your phone tools include Voice  
Commands, Calculator, Calendar,  
Alarm Clock, Stopwatch, World Clock,  
Notepad, and Ez Tip Calc.  
Prompts Mode/ Audio Playback/  
Timeout  
For Mode, set Prompts/ Readout +  
Alerts/ Readout/ Tones Only. For  
Audio Playback, set Speakerphone  
or Earpiece.  
For Timeout, set 5 seconds or  
10 seconds.  
Call Alert Ring Only/ Caller ID +  
2.1 Voice Commands  
This feature provides you with the  
following options equipped with AVR  
(Advanced Voice Recognition)  
technology. Each option has its  
detailed information on the phone and  
you can check it out by pressing the  
Ring/ Name Repeat  
2.1.1 Call <Name or Number>  
Left Soft Key  
[Info].  
Say "Call" and then call someone  
simply by saying the phone number or  
name. Please speak clearly and  
Access and Options  
1. Press the OK Key  
[MENU]  
.
exactly as in your Contacts list. When  
2. Press the Navigation Key  
twice  
46 VX5400  
you have more than one contact  
numbers, you can state the name and  
number type of the contact (for  
example, 'Call John Work').  
volume, number of missed calls,  
voicemail, messages, to time and date.  
2.1.5 Lookup <Name>  
You can look up names in your  
Contacts (for example, 'Lookup John'):  
Read out/ Create New/ Erase/  
Modify  
2.1.2 Send Msg to <Name or Number>  
Say 'Send Message' and the command  
will prompt you for the type of message.  
After choosing the message type,  
system will ask you for the contact  
name, number or group. It will  
automatically start a message. If you  
say a full-sentence command, such as  
'Send Message to Bob', it would  
automatically start a text message  
without asking for the message type.  
When using 'Send Message' command,  
speak clearly and say the number, group  
name, or name exactly as it is entered in  
your contact list.  
2.1.6 My Account  
The "My Account" command provides  
you with direct access to your Verizon  
Wireless account information.  
2.1.7 Help  
Provides a general guideline to using  
Voice Commands.  
2.2 Calculator  
Allows you to perform simple  
mathematical calculations. You can  
enter numbers up to the seventh  
decimal place. Calculations can be  
made with up to 3 lines at one time.  
2.1.3 Go to <Menu>  
The 'Go to' command allows you to  
access a menu within the phone (for  
example, 'Go to Calendar').  
If no menu option is stated, a list of  
options will be provided.  
1. Press the OK Key  
[MENU]  
.
2. Press the Navigation Key  
twice  
to scroll to SETTINGS & TOOLS  
.
2.1.4 Check <Item>  
3. Press  
4. Press  
[Tools]  
.
The "Check" command allows you to  
check out a wide range of items from  
the battery level, service mode, signal  
strength, GPS location, network status,  
[Calculator].  
5. Enter the numbers to get the value  
you want. To cancel a number, press  
VX5400 47  
SETTINGS & TOOLS  
the Left Soft Key  
[Clear].  
Down  
Moves to the next week.  
[Add]  
6. Use the Right Soft Key  
6. Press the Left Soft Key  
.
[Operator] to add paranthesis or  
power among numbers for  
calculation.  
7. Enter Subject, then scroll down to  
other set remaining settings.  
8. Highlight a Calendar setting field,  
then press the Left Soft Key  
[Set]. For each Calendar event you  
can set:  
NOTE To insert a decimal, press  
insert , press  
. To  
.
2.3 Calendar  
Start Time  
Repeat  
Alerts  
End Time  
Until  
Tones  
Allows you to keep your agenda  
convenient and easy to access.  
Simply store your appointments and  
your phone will alert you with a  
reminder you set.  
9. Use the Navigation Key  
choose a setting, then press the  
OK Key  
to  
.
SHORTCUT Pressing the Navigation Key  
from standby mode is a  
10.Press the OK Key  
[SAVE]  
hot key to Calendar by default.  
when Calendar information is  
complete.  
1. Press the OK Key  
[MENU]  
.
2. Press the Navigation Key  
to scroll to SETTINGS & TOOLS  
twice  
.
2.4 Alarm Clock  
Allows you to set one of three alarms.  
At the alarm time, Alarm 1 (or 2 or 3)  
will be displayed on the LCD screen  
and the alarm will sound.  
3. Press  
4. Press  
[Tools]  
.
[Calendar]  
.
5. Use the Navigation Key  
highlight the scheduled day.  
to  
1. Press the OK Key  
[MENU]  
.
Left Moves cursor to the  
previous day.  
2. Press the Navigation Key  
to scroll to SETTINGS & TOOLS  
twice  
.
Right  
day.  
Moves cursor to the next  
3. Press  
4. Press  
[Tools]  
.
[Alarm Clock]  
.
Up  
Moves to the previous week.  
5. Use the Navigation Key  
to  
48 VX5400  
highlight an Alarm (1, 2, or 3), then  
press the OK Key  
2.6 World Clock  
.
Allows you to determine the current  
time in another time zone or country  
by navigating with the left or right  
navigation keys.  
6. Enter the alarm information:  
Turn On/Off  
Repeat  
Set Time  
Ringtone  
1. Press the OK Key  
[MENU]  
.
7. Use the Navigation Key  
to  
2. Press the Navigation Key  
to scroll to SETTINGS & TOOLS  
twice  
highlight the information you want  
to set, then press the Left Soft Key  
[Set] to view your setting  
choices.  
.
3. Press  
4. Press  
[Tools]  
.
[World Clock]  
.
8. Press the OK Key  
[SAVE] after  
NOTE With the Left Soft Key  
[Set DST],  
setting all of the Alarm fields as  
necessary.  
set to daylight saving time.  
5. Press the Right Soft Key  
[Cities] to check out a list of  
available cities.  
When the alarm goes off, you can  
turn it off by pressing the OK Key  
or the side keys or the  
alphanumeric keypad of the vibrate  
mode key.  
6. Select a city from the list, then  
press the OK Key  
. The display  
shows the position of the city on a  
global map.  
2.5 Stopwatch  
Allows you to use your phone as  
typical stopwatch. Start measuring  
time and finish it pressing the OK Key  
. Press the Left Soft Key  
Press the Right Soft Key  
2.7 Notepad  
Allows you to add, read, edit, and  
erase notes to yourself.  
to lap.  
[Reset]  
[MENU]  
.
1. Press the OK Key  
[MENU]  
.
1. Press the OK Key  
.
2. Press the Navigation Key  
twice  
2. Press the Navigation Key  
to scroll to SETTINGS & TOOLS  
twice  
.
to scroll to SETTINGS & TOOLS  
.
3. Press  
4. Press  
[Tools]  
.
3. Press  
4. Press  
[Tools]  
.
[Notepad]  
.
[Stopwatch]  
.
VX5400 49  
SETTINGS & TOOLS  
5. Press the Left Soft Key  
to write a new note.  
[Add]  
3. Bluetooth Menu  
The VX5400 is compatible with  
®
6. Use the Left Soft Key  
change the entry mode.  
to  
devices that support the Bluetooth  
headset, hands-free, object push for  
vCard and vCal.*  
You may create and store 20 pairings  
within the VX5400 and connect to one  
device at a time.  
7. After filling in the note, press the  
OK Key to save it.  
2.8 Ez Tip Calc  
The approximate communication  
Allows you to quickly and easily  
calculate bill amounts using the bill  
total, tip % and number of people as  
variables.  
®
range for Bluetooth wireless  
technology is up to 30 feet (10 meters).  
Bluetooth QD ID B012733  
NOTE Read the user guide of each  
1. Press the OK Key  
[MENU]  
.
®
Bluetooth accessory that you are  
trying to pair with your phone because  
the instructions may be different.  
NOTE Your phone is based on the Bluetooth  
2. Press the Navigation Key  
to scroll to SETTINGS & TOOLS  
twice  
.
®
3. Press  
4. Press  
[Tools]  
.
specification, but it is not guaranteed to  
work with all devices enabled with  
Bluetooth wireless technology.  
[Ez Tip Calc]  
.
®
Phone does not support ALL  
Bluetooth OBEX Profiles.  
* For vehicle/accessory compatibility  
bluetoothchart.  
5. Enter the variable fields (Total bill,  
Tip (%), Split) and the  
corresponding calculation fields  
(tip and total for each person)  
appear automatically.  
®
TIPS Object Push Profile allows you to  
transfer a contact entry (vCard) and/or  
transfer a calendar event (vCal) to  
another OPP-enabled Bluetooth  
device.  
6. Press the Left Soft Key  
for another calculation.  
[Reset]  
3.1 Add New Device  
Pairing is the process that allows the  
handset to locate, establish, and  
register 1-to-1 connection with the  
target device.  
50 VX5400  
®
For pairing with a new Bluetooth  
device  
10. Once connected, you will see the  
®
device listed in the Bluetooth  
®
Menu and the Bluetooth device  
®
1. Follow the Bluetooth accessory  
instructions to set the device to  
pairing mode.  
connected icon  
will show  
up on your enunciator when  
®
connected to the Bluetooth  
2. Press the OK Key  
[MENU]  
.
device.  
3. Press the Navigation Key  
to scroll to SETTINGS & TOOLS  
twice  
.
Icon Reference in Adding New Device  
®
When the Bluetooth wireless  
4. Press  
5. Press  
[Bluetooth Menu]  
.
connection is built and paired devices  
are found, the following icons are  
displayed.  
[Add New Device]  
.
Set the desired device to pairing.  
®
®
Icon References When a Bluetooth  
Wireless Connection is Searched  
(neither connected nor paired).  
6. If Bluetooth power is set to off,  
you will be prompted to turn power  
on. Select Yes and press the OK  
Key  
.
When an audio device is  
searched by your VX5400  
device  
7. The device will appear in Add  
New Device menu once it has  
been located. Highlight the device  
When a PC is searched by your  
VX5400 device  
and press the OK Key  
.
When a PDA is searched by  
your VX5400 device  
8. The handset will prompt you for the  
passcode. Consult the Bluetooth  
accessory instructions for the  
appropriate passcode (typically  
“0000” - 4 zeroes). Enter the  
passcode and press the OK Key  
®
When another phone device is  
searched by your VX5400  
device  
When a printer is found by your  
VX5400 device  
.
9. Once pairing is successful, select  
either Always Ask or Always  
Connect and press the OK Key  
to connect with the device.  
When other undefined devices  
are found by your VX5400  
device  
VX5400 51  
SETTINGS & TOOLS  
Icon References When  
Successfully Connected  
3. Press  
4. Press the Left Soft Key  
On]  
[Bluetooth Menu]  
.
[Turn  
.
When an only mono headset  
is connected with your  
VX5400 device  
®
NOTE By default, your device’s Bluetooth  
functionality is turned off.  
My Phone Name  
Discovery Mode  
Allows you to edit the name of the  
Allows you to set whether your device  
is able to be searched by other  
Bluetooth devices in the area.  
®
Bluetooth device when Add New  
Device menu is highlighted.  
1. Press the OK Key  
[MENU]  
.
1. Press the OK Key  
[MENU]  
.
2. Press the Navigation Key  
to scroll to SETTINGS & TOOLS  
twice  
.
2. Press the Navigation Key  
twice  
.
to scroll to SETTINGS & TOOLS  
3. Press [Bluetooth Menu]  
4. Press the Right Soft Key  
[Options]  
5. Press  
6. Use the Navigation Key  
scroll to a setting, then press the  
3. Press [Bluetooth Menu]  
.
.
4. Press the Right Soft Key  
[Options].  
.
5. Press  
My Phone Name  
.
Discovery Mode  
.
6. Press  
name.  
to clear the existing  
to  
7. Use the numeric keypad to enter a  
new custom name.  
OK Key  
.
On/ Off  
8. Press the OK Key  
exit.  
to save and  
NOTE If you choose On for Discovery Mode,  
your device is able to be searched by  
®
other in-range Bluetooth devices.  
Turn On  
Allows you to set the phone's  
Bluetooth power On/Off.  
Supported Profiles  
Allows you to see profiles that your  
VX5400 phone can support.  
®
1. Press the OK Key  
[MENU]  
.
1. Press the OK Key  
[MENU].  
2. Press the Navigation Key  
twice  
to scroll to SETTINGS & TOOLS  
.
52 VX5400  
2. Press the Navigation Key  
twice  
fail pairing twice with the device.  
to scroll to SETTINGS & TOOLS  
.
Transferring Audio  
When a Bluetooth audio device is  
connected, Audio To Phone/ Audio  
To Device is displayed in the Options  
menu during conversation.  
3. Press [Bluetooth Menu]  
.
®
4. Press the Right Soft Key  
[Options].  
5. Press  
Supported Profiles.  
Audio To Device Sound comes from  
the Bluetooth audio device.  
Last Search  
®
Allows you to view the information of  
the devices you have at least once  
tried to search.  
Audio To Phone Sound comes from  
the handset.  
You have the following options in the  
paired device.  
Auto Pair Handsfree  
For devices that support OBEX  
When you try to pair with an audio  
device, you can choose to pair without  
PIN code. (for audio devices only)  
profiles:  
1. Remove Device: You can remove  
the device from the pairing list.  
1. Press the OK Key  
[MENU]  
.
2. Rename Device: You can rename  
the name of the paired device.  
2. Press the Navigation Key  
to scroll to SETTINGS & TOOLS  
twice  
.
3. Incoming Security: Allows you to  
set permission before connecting  
an incoming device.  
3. Press  
[Bluetooth Menu].  
4. Press Right Soft Key  
[Options].  
4. Service Discovery: Allows you to  
search for the services that the  
selected device supports.  
5. Press  
Auto Pair Handsfree.  
6. Select On/Off. (Set to On by default)  
If you change the setting to Off  
,
5. Device Info: Shows the device  
information.  
you have to enter the PIN code  
whenever you try to pair.  
6. Send Name Card: You can transfer  
Contacts list to other devices,  
except audio devices.  
Audio devices of which the PIN  
code is not 0000, the auto pairing  
fails. A message pops up to ask you  
whether you want to exit when you  
VX5400 53  
SETTINGS & TOOLS  
7. Send Calendar Event: You can  
transfer Calendar events to other  
devices, except audio devices.  
4. Sounds Settings  
Provides options to customize the  
phone’s sounds.  
For headset devices:  
4.1 Master Volume  
Allows you to set volume settings.  
1. Remove Device: You can remove  
the device from the pairing list.  
1. Press the OK Key  
[MENU]  
.
2. Rename Device: You can rename  
the name of the paired device.  
2. Press the Navigation Key  
twice  
to scroll to SETTINGS & TOOLS  
.
3. Service Discovery: Allows you to  
search for the services that the  
selected device supports.  
3. Press  
4. Press  
[Sounds Settings]  
.
[Master Volume]  
.
4. Device Info: Shows the device  
information.  
5. Adjust the volume with the  
Navigation Key then press the  
OK Key to save the setting.  
5. Send Name Card: Some types of  
your devices may support the  
vCard transfer.  
6. You can try playing each master  
volume with the Left Soft Key  
[Play]  
.
NOTES  
In the pairing list, you can  
disconnect the connected  
device with the blue arrow  
signal by pressing the OK Key  
. Reversely, you can turn  
it on by pressing the connect/  
disconnect key again.  
4.2 Call Sounds  
Allows you to set how the phone  
alerts you for types of incoming calls.  
1. Press the OK Key  
[MENU]  
.
When an audio device is  
connected, then you select  
another device and press the  
2. Press the Navigation Key  
to scroll to SETTINGS & TOOLS  
twice  
.
OK Key  
. The connection  
is transferred from the audio  
device to the other one.  
3. Press  
4. Press  
[Sounds Settings]  
.
[Call Sounds]  
.
In case your search fails to  
find any pairing device, select  
found device instead.  
54 VX5400  
4.2.1 Call Ringtone  
4.3 Alert Sounds  
Allows you to select the alert type for  
a new message.  
1. Press the OK Key  
[MENU]  
2. Press the Navigation Key  
twice to scroll to SETTINGS &  
1. Press the OK Key  
[MENU]  
.
TOOLS  
.
2. Press the Navigation Key  
twice  
to scroll to SETTINGS & TOOLS  
.
3. Press  
4. Press  
5. Press  
[Sounds Settings]  
.
3. Press  
4. Press  
[Sounds Settings]  
.
[Call Sounds]  
.
[Alert Sounds]  
.
[Call Ringtone]  
.
5. Select TXT Message/ Picture  
Message/ Voicemail  
6. Use the Navigation Key  
scroll to a ringtone then press the  
OK Key to save the sound.  
to  
.
6. Each Alert Sounds menu has the  
following options.  
Tone/ Vibrate/ Reminder  
4.2.2 Call Vibrate  
1. Press the OK Key  
[MENU].  
4.4 Keypad Volume  
Allows you to set the keypad volume.  
2. Press the Navigation Key  
twice to scroll to SETTINGS &  
1. Press the OK Key  
[MENU]  
.
TOOLS  
.
2. Press the Navigation Key  
to scroll to SETTINGS & TOOLS  
twice  
.
3. Press  
4. Press  
5. Press  
[Sounds Settings]  
[Call Sounds]  
[Call Vibrate]  
.
.
3. Press  
4. Press  
[Sounds Settings]  
.
.
[Keypad Volume]  
.
6. Use the Navigation Key  
scroll to a setting, then press  
the OK Key  
On/ Off  
to  
5. Adjust the volume with the  
Navigation Key then press the  
OK Key to save the setting.  
.
VX5400 55  
SETTINGS & TOOLS  
to scroll to SETTINGS & TOOLS  
.
4.5 Service Alerts  
Allows you to set any of the four Alert  
options to either On or Off.  
3. Press  
4. Press  
[Sounds Settings]  
.
[Power On/Off]  
.
1. Press the OK Key  
[MENU]  
.
5. Select Power On/ Power Off  
6. Use the Navigation Key to  
scroll to a setting (On/ Off), then  
press the OK Key  
.
2. Press the Navigation Key  
twice  
to scroll to SETTINGS & TOOLS  
.
3. Press  
4. press  
[Sounds Settings]  
.
.
[Service Alerts]  
.
5. Select an alert option.  
5. Display Settings  
Provides options to customize the  
phone’s display screen.  
ERI Alerts you to the status of cellular  
service.  
ERI: Enhanced Roaming Indicator  
5.1 Banner  
Minute Beep Alerts you one minute  
before the end of every minute during  
a call.  
Allows you to enter a string of up to 15  
characters which displays on the LCD  
screen.  
Call Connect Alerts you when the  
call is connected.  
1. Press the OK Key  
[MENU]  
.
2. Press the Navigation Key  
to scroll to SETTINGS & TOOLS  
twice  
.
Charge Complete Alerts you when  
the battery is completely charged.  
6. Use the Navigation Key  
scroll to a setting, then press the  
OK Key  
to  
3. Press  
4. Press  
[Display Settings]  
.
[Banner]  
.
.
5.1.1 Personal Banner  
4.6 Power On/Off  
1. Press the OK Key  
[MENU].  
Allows you to set the phone to sound  
a tone when the phone is powered  
on/off.  
2. Press the Navigation Key  
twice to scroll to SETTINGS &  
TOOLS  
.
1. Press the OK Key  
[MENU]  
.
3. Press  
[Display Settings]  
.
2. Press the Navigation Key  
twice  
56 VX5400  
4. Press  
5. Press  
Banner]  
[Banner]  
.
4. Press  
5. Choose a Backlight submenu  
Display/ Keypad) and press the  
[Backlight].  
[Personal  
.
(
OK Key  
.
6. Create your own banner text then  
press the OK Key  
[SAVE].  
1. Display  
Main Backlight: 7 Seconds/ 15  
Seconds/ 30 Seconds/ Always  
On/ Always Off  
5.1.2 ERI Banner  
If you use ERI Service, ERI Text is  
shown on the sub banner.  
Front Backlight: 7 Seconds/ 15  
Seconds/ 30 Seconds  
1. Press the OK Key  
[MENU].  
2. Keypad: 7 Seconds/ 15 Seconds/  
30 Seconds/ Always On/ Always  
Off  
2. Press the Navigation Key  
twice to scroll to SETTINGS &  
TOOLS  
.
TIP  
While the main backlight of your phone  
is set to Always On option, the power  
save mode is not activated. Also, the  
option may shorten the battery life.  
3. Press  
4. Press  
5. Press  
[Display Settings]  
[Banner]  
[ERI Banner]  
.
.
.
5.3 Wallpaper  
6. Use the Navigation Key  
scroll to a setting (On/ Off), then  
press the OK Key  
to  
Allows you to choose the kind of  
background to be displayed on the  
phone.  
.
5.2 Backlight  
1. Press the OK Key  
[MENU]  
.
Allows you to set the duration for  
illuminating the backlight. Screen and  
Keypad are set separately.  
2. Press the Navigation Key  
to scroll to SETTINGS & TOOLS  
twice  
.
3. Press  
4. Press  
[Display Settings]  
.
1. Press the OK Key  
[MENU]  
.
[Wallpaper]  
.
2. Press the Navigation Key  
twice  
to scroll to SETTINGS & TOOLS  
.
5. Select Main Wallpaper/ Front  
Wallpaper  
.
3. Press [Display Settings]  
.
VX5400 57  
SETTINGS & TOOLS  
6. Select from available screens then  
scroll to a setting, then press the  
OK Key  
press the OK Key  
.
.
Normal/ Large  
5.4 Display Themes  
Allows you to choose the color of the  
background screen.  
6. Press the Left Soft Key  
to preview the selected dial font.  
[View]  
5.6 Clock Format  
1. Press the OK Key  
[MENU]  
.
Allows you to choose the kind of  
clock to be displayed on the LCD  
screen.  
2. Press the Navigation Key  
to scroll to SETTINGS & TOOLS  
twice  
.
3. Press  
[Display Settings]  
[Display Themes]  
to  
scroll to a setting, then press the  
OK Key  
.
1. Press the OK Key  
[MENU]  
.
4. Press  
.
2. Press the Navigation Key  
to scroll to SETTINGS & TOOLS  
twice  
5. Use the Navigation Key  
.
3. Press  
4. Press  
5. Press  
[Display Settings]  
[Clock Format]  
Main Clock or  
.
.
Classic/ Modern  
.
6. Press the Left Soft Key  
[View]  
to preview the selected display  
theme.  
Front Clock  
6. Use the Navigation Key  
scroll to a setting, then press the  
.
to  
5.5 Dial Fonts  
OK Key  
.
Allows you to set the dial font size.  
This setting is helpful for those who  
need the text to display a little bit  
larger.  
For Main Clock  
:
Normal/ Analog/ Digital/  
Dual(Set City in World Clock)/  
Off  
1. Press the OK Key  
[MENU]  
.
For Front Clock  
:
2. Press the Navigation Key  
twice  
Digital1/ Digital2/ Minimize/  
Off  
to scroll to SETTINGS & TOOLS  
.
3. Press  
4. press  
[Display Settings]  
.
7. Press the Left Soft Key  
to preview the selected clock  
format.  
[View]  
[Dial Fonts]  
.
5. Use the Navigation Key  
to  
58 VX5400  
6.2 Set Shortcut Keys  
6. Phone Settings  
Allows you to set a shortcut to phone  
menus using the down, up, left and  
right Navigation Keys.  
The Phone Settings Menu allows you  
to designate specific settings to  
customize how you use your phone.  
1. Press the OK Key  
[MENU]  
.
6.1 Standalone Mode  
2. Press the Navigation Key  
to scroll to SETTINGS & TOOLS  
twice  
(Airplane Mode)  
.
Allows you to use the menu functions  
except making calls, Bluetooth  
®
3. Press  
[Phone Settings]  
[Set Shortcut Keys]  
to  
scroll to a setting, then press the  
OK Key  
.
feature, and web accessing, when  
radio transmission is restricted.  
Activating Standalone Mode will  
disable all wireless communications.  
When in Standalone Mode, services  
supporting Location On functionality  
(such as Chaperone) will be  
4. Press  
.
5. Use the Navigation Key  
.
Left Key/ Up Key/ Right Key/  
Down Key  
suspended.  
6. Select the shortcut, then press the  
Left Soft Key  
[Set].  
1. Press the OK Key  
[MENU]  
.
2. Press the Navigation Key  
twice  
to scroll to SETTINGS & TOOLS  
.
3. Press  
[Phone Settings]  
[Standalone Mode]  
to  
scroll to a setting, then press the  
.
4. Press  
.
5. Use the Navigation Key  
OK Key  
.
On/ Off  
VX5400 59  
SETTINGS & TOOLS  
6.3 Voice Commands  
6.5 Location  
Allows you to set GPS (Global  
Positioning System: Satellite assisted  
location information system) mode.  
1. Press the OK Key  
[MENU]  
.
2. Press the Navigation Key  
to scroll to SETTINGS & TOOLS  
twice  
.
1. Press the OK Key  
[MENU]  
.
3. Press  
[Phone Settings]  
.
2. Press the Navigation Key  
to scroll to SETTINGS & TOOLS  
twice  
4. Press  
[Voice Commands]  
.
.
Prompts Mode/ Audio Playback/  
Timeout  
For Mode, set Prompts/ Readout +  
3. Press  
4. Press  
[Phone Settings]  
.
[Location]  
.
Alerts/ Readout/ Tones Only  
For Audio Playback, set  
.
5. Use the Navigation Key  
scroll to a setting (Location On/  
E911 Only), then press the OK Key  
to  
Speakerphone or Earpiece  
.
For Timeout, set 5 seconds or  
.
10 seconds  
.
NOTES  
GPS satellite signals are not  
always received by the phone  
under bad atmospheric and  
environmental conditions,  
indoors, etc.  
Call Alert Ring Only/ Caller ID +  
Ring/ Name Repeat  
6.4 Language  
When a location lock mode is  
activated in the Security  
Menu, the lock code is  
Allows you to set the bilingual feature  
according to your preference. Choose  
either English or Spanish.  
required when you enter  
location menu. The lock code  
is the same 4 digits you use  
as your device lock code;  
initially the last 4 digits of your  
phone number.  
1. Press the OK Key  
[MENU]  
.
2. Press the Navigation Key  
to scroll to SETTINGS & TOOLS  
twice  
.
3. Press  
4. Press  
[Phone Settings]  
.
When in Standalone Mode,  
services supporting Location  
On functionality (such as  
Chaperone) will be  
[Language]  
.
5. Use the Navigation Key  
scroll to a setting (English/  
to  
suspended.  
Español), then press the OK Key  
.
60 VX5400  
to enter the new lock code  
again.  
6.6 Security  
The Security menu allows you to  
secure the phone electronically.  
NOTE The lock codes are divided into two:  
Phone Only/ Calls & Services.  
1. Press the OK Key  
[MENU]  
.
2. Press the Navigation Key  
to scroll to SETTINGS & TOOLS  
twice  
.
6.6.2 Restrictions  
Allows you to set separate  
restrictions for Location Setting,  
Calls and Messages.  
3. Press  
4. Press  
[Phone Settings]  
.
[Security]  
.
1. Press the OK Key  
[MENU].  
5. Enter the four-digit lock code.  
The lock code is the last 4 digits of  
your mobile phone number if it is  
set.  
The lock code is the last 4 digits of  
your MEID if your mobile phone  
number is not set.  
2. Press the Navigation Key  
twice to scroll to SETTINGS &  
TOOLS  
.
3. Press  
4. Press  
[Phone Settings]  
.
[Security]  
.
5. Enter the four-digit lock code.  
6. Press Restrictions  
7. Enter the four-digit PIN code.  
8. Select a Restrictions menu then  
press the OK Key  
Location Setting/ Calls  
(Incoming Calls/ Outgoing  
Calls)/ Messages (Incoming  
Messages/ Outgoing  
Messages)  
6.6.1 Edit Codes  
.
Allows you to enter a new four-  
digit lock code.  
1. Press the OK Key  
[MENU].  
.
2. Press the Navigation Key  
twice to scroll to SETTINGS &  
TOOLS  
.
3. Press  
4. Press  
[Phone Settings]  
.
[Security]  
.
9. Use the Navigation Key  
set restriction then press the OK  
to  
5. Enter the four-digit lock code.  
6. Press Edit Codes  
7. For confirmation, it will ask you  
.
Key  
.
VX5400 61  
SETTINGS & TOOLS  
Location Setting Lock Setting/  
6.6.4 Lock Phone Now  
Unlock Setting  
Calls Incoming Calls/ Outgoing  
Calls  
Messages Incoming  
Messages/ Outgoing Messages  
1. Press the OK Key  
[MENU].  
2. Press the Navigation Key  
twice to scroll to SETTINGS &  
TOOLS  
.
3. Press  
4. Press  
[Phone Settings]  
.
6.6.3 Phone Lock  
[Security]  
.
Keeps your phone from unauthorized  
use. Once the phone is locked, it's in  
restricted mode until the lock code  
is entered. You can receive phone  
calls and still make emergency calls.  
You can modify the lock code using  
Edit Code submenu within the  
Security menu.  
5. Enter the four-digit lock code.  
6. Press Lock Phone Now  
.
6.6.5 Reset Default  
Allows you to reset your phone to  
the factory default settings.  
1. Press the OK Key  
[MENU].  
1. Press the OK Key  
[MENU].  
2. Press the Navigation Key  
twice to scroll to SETTINGS &  
2. Press the Navigation Key  
twice to scroll to SETTINGS &  
TOOLS  
.
TOOLS  
.
3. Press  
4. Press  
[Phone Settings]  
.
3. Press  
4. Press  
[Phone Settings]  
.
[Security]  
.
[Security]  
.
5. Enter the four-digit lock code.  
6. Press Reset Default  
7. Press the OK Key after  
reading the warning message.  
8. Select Revert  
A confirmation message is  
displayed briefly before the  
phone resets itself.  
5. Enter the four-digit lock code.  
6. Press Phone Lock  
7. Select an option then press the  
OK Key  
.
.
.
.
Unlocked The phone is never  
locked (Lock mode can be used).  
On Power Up The phone is locked  
when it is turned on.  
62 VX5400  
6.6.6 Restore Phone  
3. Press  
4. Press  
[Phone Settings]  
[System Select]  
to  
.
.
Allows you to erase all user data  
and Contact information you've  
entered in the phone's memory so  
it's as if it just left the factory.  
5. Use the Navigation Key  
scroll to a setting (Home Only/  
Automatic A/ Automatic B), then  
press the OK Key  
.
1. Press the OK Key  
[MENU].  
2. Press the Navigation Key  
twice to scroll to SETTINGS &  
6.8 NAM Select  
TOOLS  
.
Allows you to select the phone’s  
NAM (Number Assignment Module)  
if the phone is registered with  
multiple service providers.  
3. Press  
4. Press  
[Phone Settings]  
.
[Security]  
.
5. Enter the four-digit lock code.  
6. Press Restore Phone  
7. Press the OK Key after  
1. Press the OK Key  
[MENU].  
.
2. Press the Navigation Key  
twice to scroll to SETTINGS &  
reading the warning message.  
TOOLS  
.
8. Enter the four-digit lock code.  
3. Press  
4. press  
[Phone Settings]  
.
6.7 System Select  
[NAM Select].  
Allows you to set up the phone  
management environment. Leave  
this setting as the default unless  
you want to alter system selection  
as instructed by your service  
provider.  
5. Use the Navigation Key  
scroll to a setting (NAM1/ NAM2),  
then press the OK Key  
to  
.
1. Press the OK Key  
[MENU].  
2. Press the Navigation Key  
twice to scroll to SETTINGS &  
TOOLS  
.
VX5400 63  
SETTINGS & TOOLS  
4. Press  
[Answer Options].  
6.9 Auto NAM  
Allows the phone to automatically  
switch between programmed  
telephone numbers corresponding to  
the service provider area.  
5. Check the box options as you wish  
for answer options. You can make  
multiple choices, while you mark  
nothing, you have to press  
answer an incoming call.  
to  
1. Press the OK Key  
[MENU].  
Flip Open/ Any Key/ Auto with  
Handsfree  
2. Press the Navigation Key  
twice to scroll to SETTINGS &  
TOOLS  
.
NOTE Auto with Handsfree is available only  
when any external device is connected  
to your phone.  
3. Press  
4. Press  
[Phone Settings]  
.
[Auto NAM]  
.
When Ringer is set to mute, such as the  
settings below, Ringer is not activated.  
5. Use the Navigation Key  
to  
scroll to a setting, then press the  
When All Sounds Off/ Alarm Only  
is set or individual Contact Ringer  
OK Key  
.
On/ Off  
ID is set to No Ring  
.
When Ringer is set to mute with  
side key or "Quiet".  
7. Call Settings  
The Call Settings Menu allows you to  
designate how the phone handles  
both incoming and outgoing calls.  
7.2 Auto Retry  
Allows you to set the length of time  
the phone waits before automatically  
redialing a number when the  
attempted call fails.  
7.1 Answer Options  
Allows you to determine how the  
phone will answer an incoming call.  
1. Press the OK Key  
[MENU].  
1. Press the OK Key  
[MENU].  
2. Press the Navigation Key  
twice to scroll to SETTINGS &  
2. Press the Navigation Key  
twice to scroll to SETTINGS &  
TOOLS  
.
TOOLS  
.
3. Press  
4. Press  
[Call Settings]  
.
3. Press  
[Call Settings].  
[Auto Retry]  
.
64 VX5400  
5. Use the Navigation Key  
scroll to a setting, then press the  
OK Key  
Off/ Every 10 Seconds/ Every 30  
Seconds/ Every 60 Seconds  
to  
TTY Full:  
- Users who cannot talk and hear  
send and receive a text message  
through TTY equipment.  
.
TTY + Talk:  
- Users who can talk but cannot  
hear receive a text message and  
send voice through TTY  
equipment.  
7.3 TTY Mode  
Allows you to attach a TTY device  
enabling you to communicate with  
parties also using a TTY device. A phone  
with TTY support is able to translate  
typed characters to voice. Voice can  
also be translated into characters and  
then displayed on the TTY.  
TTY + Hear:  
- Users who can hear but cannot  
talk send a text message and  
receive voice through TTY  
equipment.  
1. Press the OK Key  
[MENU].  
TTY Off:  
2. Press the Navigation Key  
- Normal users send and receive  
without TTY equipment.  
twice to scroll to SETTINGS &  
TOOLS  
.
3. Press  
4. Press  
[Call Settings]  
.
Connecting TTY Equipment and a  
Terminal  
[TTY Mode]  
.
An explanation message is  
displayed.  
1. Connect a TTY cable to TTY  
connection on the terminal (TTY  
connection location is the same as  
a headset jack).  
5. Press the OK Key  
6. Use the Navigation Key  
scroll to a setting, then press the  
OK Key  
to continue.  
to  
2. Enter the phone menu and set up  
the desired TTY mode.  
.
3. After setting a TTY mode, check  
the LCD screen of the phone for  
the TTY icon.  
TTY Full/ TTY + Talk/ TTY + Hear/  
TTY Off  
VX5400 65  
SETTINGS & TOOLS  
4. Connect the TTY equipment to the  
power source and turn it on.  
7.4 One Touch Dial  
Allows you to initiate a speed dial call  
by pressing and holding the speed dial  
digit. If set to Off, Speed Dial numbers  
designated in your Contacts will not  
function.  
5. Make a phone connection to the  
desired number.  
6. When connection is made, use the  
TTY equipment to type in and send  
a text message or send voice.  
1. Press the OK Key  
[MENU].  
2. Press the Navigation Key  
twice to scroll to SETTINGS &  
7. The voice or text message from the  
receiver end displays on the TTY  
equipment display.  
TOOLS  
.
3. Press  
[Call Settings]  
[One Touch Dial]  
to  
scroll to a setting, then press the  
.
TTY Mode (Tele Type writer)  
4. Press  
.
When making  
Transmission/  
5. Use the Navigation Key  
communications  
with a normal  
terminal  
Menu  
User Feature Receiving  
Mode  
OK Key  
On/ Off  
.
text message  
transmission,  
text message  
receiving  
For  
TTY  
Full  
Operator  
required  
hearing-/  
verbally-  
impaired  
7.5 Voice Privacy  
voice  
For  
hearing-  
impaired  
TTY +  
Talk  
able to  
talk  
Operator  
required  
transmission,  
text message  
receiving  
Allows you to set the voice privacy  
feature for CDMA calls. CDMA offers  
inherent voice privacy. Check with  
your service provider for availability.  
For  
text message  
transmission,  
voice receiving  
TTY +  
Hear  
Operator  
required  
verbally- audible  
impaired  
For  
regular  
users  
voice  
transmission,  
voice receiving  
1. Press the OK Key  
[MENU].  
TTY  
Off  
2. Press the Navigation Key  
twice to scroll to SETTINGS &  
TOOLS  
.
3. Press  
4. Press  
[Call Settings]  
.
[Voice Privacy]  
.
66 VX5400  
5. Use the Navigation Key  
to  
3. Press Left Soft Key  
[Erase],  
scroll to a setting, then press the  
then press  
[Yes].  
OK Key  
.
On/ Off  
9. Phone Info  
Allows you to view the information  
specific to your phone and software.  
8. Memory  
Shows the memory information saved  
in your phone.  
1. Press the OK Key  
[MENU].  
2. Press the Navigation Key  
twice to scroll to SETTINGS &  
1. Press the OK Key  
[MENU].  
2. Press the Navigation Key  
TOOLS  
.
twice to scroll to SETTINGS &  
3. Press  
[Phone Info]  
.
TOOLS  
3. Press  
4. Use the Navigation Key  
select a setting, then press the OK  
Key  
.
[Memory]  
.
9.1 My Number  
Allows you to view your phone  
number.  
to  
.
1. Press the OK Key  
[MENU].  
Memory Usage / My Pictures /  
My Sounds  
2. Press the Navigation Key  
twice to scroll to SETTINGS &  
NOTE The option Memory Usage shows the  
TOOLS  
.
total used memory available to store.  
3. Press  
4. Press  
[Phone Info]  
.
If you're running low on phone  
memory, you can choose specific  
picture and sound files to delete.  
[My Number]  
.
1. Access phone memory and select  
My Pictures or My Sounds.  
2. Mark the files to be erased using  
the Navigation Key  
Key , or Right Soft Key  
[Mark All]  
, the OK  
.
VX5400 67  
SETTINGS & TOOLS  
9.2 SW/HW Version  
Allows you to view the versions of  
various applications such as SW, PRL,  
ERI, Browser, Get It Now, AVR, MMS,  
Bluetooth, MSUI, HW Version, ESN or  
MEID Information, and Warranty Date  
Code.  
1. Press the OK Key  
[MENU].  
2. Press the Navigation Key  
twice to scroll to SETTINGS &  
TOOLS  
.
3. Press  
4. Press  
[Phone Info]  
.
[SW/HW Version]  
.
9.3 Icon Glossary  
Allows you to view all the icons and  
their meanings.  
1. Press the OK Key  
[MENU]  
.
2. Press the Navigation Key  
twice  
to scroll to SETTINGS & TOOLS  
.
3. Press  
4. Press  
[Phone Info]  
.
[Icon Glossary]  
.
68 VX5400  
Safety  
evaluations of the relevant scientific  
literature. For example, over 120  
scientists, engineers, and physicians  
from universities, government health  
agencies, and industry reviewed the  
available body of research to develop  
the ANSI Standard (C95.1).  
The design of your phone complies  
with the FCC guidelines (and those  
standards).  
TIA Safety  
Information  
The following is the complete TIA  
Safety Information for wireless  
handheld phones.  
Exposure to Radio Frequency Signal  
Your wireless handheld portable  
phone is a low power radio  
transmitter and receiver. When ON, it  
receives and sends out Radio  
Frequency (RF) signals.  
Antenna Care  
Use only the supplied or an approved  
replacement antenna. Unauthorized  
antennas, modifications, or  
attachments could damage the phone  
and may violate FCC regulations.  
In August, 1996, the Federal  
Communications Commissions (FCC)  
adopted RF exposure guidelines with  
safety levels for handheld wireless  
phones. Those guidelines are  
consistent with the safety standards  
previously set by both U.S. and  
international standards bodies:  
Phone Operation  
NORMAL POSITION: Hold the phone  
as you would any other telephone  
with the antenna pointed up and over  
your shoulder.  
ANSI C95.1 (1992) *  
NCRP Report 86 (1986)  
ICNIRP (1996)  
Tips on Efficient Operation  
For your phone to operate most  
efficiently:  
Don’t touch the antenna  
* American National Standards  
Institute; National Council on  
Radiation Protection and  
unnecessarily when the phone is in  
use. Contact with the antenna affects  
call quality and may cause the phone  
to operate at a higher power level  
than otherwise needed.  
Measurements; International  
Commission on Non-Ionizing  
Radiation Protection  
Those standards were based on  
comprehensive and periodic  
VX5400 69  
Safety  
Driving  
research by and recommendations of  
Wireless Technology Research.  
Check the laws and regulations on the  
use of wireless phones in the areas  
where you drive and always obey  
them. Also, if using your phone while  
driving, please observe the following:  
Persons with pacemakers:  
Should ALWAYS keep the phone  
more than six (6) inches from their  
pacemaker when the phone is  
turned ON;  
Give full attention to driving --  
driving safely is your first  
responsibility;  
Should not carry the phone in a  
breast pocket;  
Use hands-free operation, if  
available;  
Should use the ear opposite the  
pacemaker to  
minimize the potential for  
interference;  
Pull off the road and park before  
making or answering a call if  
driving conditions or the law  
require it.  
Should turn the phone OFF  
immediately if there is any reason  
to suspect that interference is  
taking place.  
Electronic Devices  
Most modern electronic equipment is  
shielded from RF signals. However,  
certain electronic equipment may not  
be shielded against the RF signals  
from your wireless phone.  
Hearing Aids  
Some digital wireless phones may  
interfere with some hearing aids. In  
the event of such interference, you  
may want to consult your service  
provider (or call the customer service  
line to discuss alternatives).  
Pacemakers  
The Health Industry Manufacturers  
Association recommends that a  
minimum separation of six (6) inches  
be maintained between a handheld  
wireless phone and a pacemaker to  
avoid potential interference with the  
pacemaker. These recommendations  
are consistent with the independent  
Other Medical Devices  
If you use any other personal medical  
device, consult the manufacturer of  
your device to determine if it is  
adequately shielded from external RF  
70 VX5400  
energy. Your physician may be able to  
assist you in obtaining this  
information.  
Blasting Areas  
To avoid interfering with blasting  
operations, turn your phone OFF when  
in a “blasting area” or in areas  
posted: “Turn off two-way radio”.  
Obey all signs and instructions.  
Health Care Facilities  
Turn your phone OFF in health care  
facilities when any regulations posted  
in these areas instruct you to do so.  
Hospitals or health care facilities may  
use equipment that could be sensitive  
to external RF energy.  
Potentially Explosive Atmosphere  
Turn your phone OFF when in any  
area with a potentially explosive  
atmosphere and obey all signs and  
instructions. Sparks in such areas  
could cause an explosion or fire  
resulting in bodily injury or even  
death.  
Areas with a potentially explosive  
atmosphere are often, but not always  
marked clearly. Potential areas may  
include: fueling areas (such as  
gasoline stations); below deck on  
boats; fuel or chemical transfer or  
storage facilities; vehicles using  
liquefied petroleum gas (such as  
propane or butane); areas where the  
air contains chemicals or particles  
(such as grain, dust, or metal  
Vehicles  
RF signals may affect improperly  
installed or inadequately shielded  
electronic systems in motor vehicles.  
Check with the manufacturer or its  
representative regarding your vehicle.  
You should also consult the  
manufacturer of any equipment that  
has been added to your vehicle.  
Posted Facilities  
Turn your phone OFF in any facility  
where posted notices so require.  
powders); and any other area where  
you would normally be advised to turn  
off your vehicle engine.  
Aircraft  
FCC regulations prohibit using your  
phone while in the air. Switch OFF  
your phone before boarding an  
aircraft.  
VX5400 71  
Safety  
For Vehicles Equipped with an Air  
Bag  
Safety Information  
Please read and observe the following  
information for safe and proper use of  
your phone and to prevent damage.  
Also, keep the user guide in an  
accessible place at all times after  
reading it.  
An air bag inflates with great force.  
DO NOT place objects, including  
either installed or portable wireless  
equipment, in the area over the air  
bag or in the air bag deployment area.  
If in-vehicle wireless equipment is  
improperly installed and the air bag  
inflates, serious injury could result.  
Violation of the  
instructions may  
cause minor or  
serious damage to  
the product.  
Caution  
Do not disassemble or open crush,  
bend or deform, puncture or shred.  
Do not modify or remanufacture,  
attempt to insert foreign objects  
into the battery, immerse or expose  
to water or other liquids, expose to  
fire, explosion or other hazard.  
Only use the battery for the system  
for which it is specified.  
Only use the battery with a  
charging system that has been  
qualified with the system per IEEE-  
Std-1725-2006. Use of an  
unqualified battery or charger may  
present a risk of fire, explosion,  
leakage, or other hazard.  
Do not short circuit a battery or  
allow metallic conductive objects  
to contact battery terminals.  
72 VX5400  
Replace the battery only with  
another battery that has been  
qualified with the system per this  
standard, IEEE-Std-1725-2006. Use  
of an unqualified battery may  
present a risk of fire, explosion,  
leakage or other hazard.  
Only use the approved battery  
charger. Otherwise, you may cause  
serious damage to your phone.  
Use the correct adapter for your  
phone when using the battery pack  
charger abroad.  
Promptly dispose of used batteries  
in accordance with local  
regulations.  
Battery Information and Care  
Please dispose of your battery  
properly or take it to your local  
wireless carrier for recycling.  
Battery usage by children should  
be supervised.  
The battery doesn’t need to be  
Avoid dropping the phone or  
battery. If the phone or battery is  
dropped, especially on a hard  
surface, and the user suspects  
damage, take it to a service center  
for inspection.  
empty before recharging.  
Use only LG-approved chargers  
specific to your phone model since  
they are designed to maximize  
battery life.  
Do not disassemble or short-circuit  
the battery.  
At least, one of the Authentication  
methods may be implemented. (e.g.  
H/W, S/W, Mechanical, Hologram,  
etc.)  
Keep the battery’s metal contacts  
clean.  
Improper battery use may result in  
a fire, explosion or other hazard.  
Replace the battery when it no  
longer provides acceptable  
performance. The battery can be  
recharged several hundred times  
before replacement.  
Charger and Adapter Safety  
The charger and adapter are  
intended for indoor use only.  
Recharge the battery after long  
periods of non-use to maximize  
battery life.  
Insert the battery pack charger  
vertically into the wall power  
socket.  
Battery life will vary due to usage  
VX5400 73  
Safety  
patterns and environmental  
conditions.  
short-circuit the phone. Always  
cover the receptacle when not in  
use.  
Use of extended backlighting,  
Browser, and data connectivity kits  
affect battery life and talk/ standby  
times.  
Don’t short-circuit the battery.  
Metallic articles such as a coin,  
paperclip or pen in your pocket or  
bag may short-circuit the + and –  
terminals of the battery (metal  
strips on the battery) upon moving.  
Short-circuit of the terminal may  
damage the battery and cause an  
explosion.  
The self-protection function of the  
battery cuts the power of the  
phone when its operation is in an  
abnormal state. In this case,  
remove the battery from the phone,  
reinstall it, and turn the phone on.  
General Notice  
Explosion, Shock, and Fire Hazards  
Using a damaged battery or  
placing a battery in your mouth  
may cause serious injury.  
Do not put your phone in a place  
subject to excessive dust and keep  
the minimum required distance  
between the power cord and heat  
sources.  
Do not place items containing  
magnetic components such as a  
credit card, phone card, bank book,  
or subway ticket near your phone.  
The magnetism of the phone may  
damage the data stored in the  
magnetic strip.  
Unplug the power cord prior to  
cleaning your phone, and clean the  
power plug pin when it’s dirty.  
When using the power plug,  
ensure that it’s firmly connected. If  
not, it may cause excessive heat or  
fire.  
Talking on your phone for a long  
period of time may reduce call  
quality due to heat generated  
during use.  
If you put your phone in a pocket or  
bag without covering the  
receptacle of the phone (power  
plug pin), metallic articles (such as  
a coin, paperclip or pen) may  
When the phone is not used for a  
long period time, store it in a safe  
place with the power cord  
74 VX5400  
unplugged.  
so you don't disturb others.  
Using the phone in proximity to  
receiving equipment (i.e., TV or  
radio) may cause interference to  
the phone.  
Do not turn your phone on or off  
when putting it to your ear.  
Use accessories, such as  
earphones and headsets, with  
caution. Ensure that cables are  
tucked away safely and do not  
touch the antenna unnecessarily.  
Do not use the phone if the  
antenna is damaged. If a damaged  
antenna contacts skin, it may  
cause a slight burn. Please contact  
an LG Authorized Service Center to  
replace the damaged antenna.  
Caution:  
Avoid potential  
hearing loss.  
Do not immerse your phone in  
water. If this happens, turn it off  
immediately and remove the  
battery. If the phone does not work,  
take it to an LG Authorized Service  
Center.  
Prolonged exposure to loud sounds  
(including music) is the most common  
cause of preventable hearing loss.  
Some scientific research suggests  
that using portable audio devices,  
such as portable music players and  
cellular telephones, at high volume  
settings for long durations may lead to  
permanent noiseinduced hearing loss.  
This includes the use of headphones  
(including headsets, earbuds and  
Do not paint your phone.  
The data saved in your phone  
might be deleted due to careless  
use, repair of the phone, or  
upgrade of the software. Please  
backup your important phone  
numbers. (Ringtones, text  
®
Bluetooth or other wireless devices).  
messages, voice messages,  
pictures, and videos could also be  
deleted.) The manufacturer is not  
liable for damage due to the loss of  
data.  
Exposure to very loud sound has also  
been associated in some studies with  
tinnitus (a ringing in the ear),  
hypersensitivity to sound and  
distorted hearing. Individual  
susceptibility to noise-induced  
hearing loss and other potential  
hearing problems varies.  
When you use the phone in public  
places, set the ringtone to vibration  
VX5400 75  
Safety  
The amount of sound produced by a  
portable audio device varies  
depending on the nature of the sound,  
the device, the device settings and  
the headphones. You should follow  
some commonsense  
Temporary hearing loss might  
cause unsafe volumes to sound  
normal.  
Do not listen at any volume that  
causes you discomfort. If you  
experience ringing in your ears,  
hear muffled speech or experience  
any temporary hearing difficulty  
after listening to your portable  
audio device, discontinue use and  
consult your doctor.  
recommendations when using any  
portable audio device:  
Set the volume in a quiet  
environment and select the lowest  
volume at which you can hear  
adequately.  
You can obtain additional  
information on this subject from  
the following sources:  
When using headphones, turn the  
volume down if you cannot hear  
the people speaking near you or if  
the person sitting next to you can  
hear what you are listening to.  
American Academy of Audiology  
11730 Plaza American Drive, Suite 300  
Reston, VA 20190  
Voice: (800) 222-2336  
Do not turn the volume up to block  
out noisy surroundings. If you  
choose to listen to your portable  
device in a noisy environment, use  
noise-cancelling headphones to  
block out background environmental  
noise.  
National Institute on Deafness and  
Other Communication Disorders  
National Institutes of Health  
31 Center Drive, MSC 2320  
Bethesda, MD USA 20892-2320  
Voice: (301) 496-7243  
Internet:  
ng  
Limit the amount of time you listen.  
As the volume increases, less time  
is required before your hearing  
could be affected.  
Avoid using headphones after  
exposure to extremely loud noises,  
such as rock concerts, that might  
cause temporary hearing loss.  
76 VX5400  
National Institute for Occupational  
Safety and Health  
Hubert H. Humphrey Bldg.  
200 Independence Ave., SW  
Washington, DC 20201  
Voice: 1-800-35-NIOSH (1-800-356-  
4674)  
FDA Consumer  
Update  
The U.S. Food and Drug  
Administration’s Center  
for Devices and  
Radiological Health  
Consumer Update on  
Mobile Phones:  
Internet:  
e/default.html  
1. Do wireless phones pose a  
health hazard?  
The available scientific evidence does  
not show that any health problems  
are associated with using wireless  
phones. There is no proof, however,  
that wireless phones are absolutely  
safe. Wireless phones emit low levels  
of Radio Frequency (RF) energy in the  
microwave range while being used.  
They also emit very low levels of RF  
when in standby mode. Whereas high  
levels of RF can produce health  
effects (by heating tissue), exposure  
to low level RF that does not produce  
heating effects causes no known  
adverse health effects. Many studies  
of low level RF exposures have not  
found any biological effects. Some  
studies have suggested that some  
biological effects may occur, but such  
findings have not been confirmed by  
additional research. In some cases,  
VX5400 77  
Safety  
other researchers have had difficulty  
in reproducing those studies, or in  
determining the reasons for  
inconsistent results.  
Design wireless phones in a way  
that minimizes any RF exposure to  
the user that is not necessary for  
device function; and  
Cooperate in providing users of  
wireless phones with the best  
possible information on possible  
effects of wireless phone use on  
human health.  
2. What is the FDA's role  
concerning the safety of  
wireless phones?  
Under the law, the FDA does not  
review the safety of radiation-emitting  
consumer products such as wireless  
phones before they can be sold, as it  
does with new drugs or medical  
devices. However, the agency has  
authority to take action if wireless  
phones are shown to emit Radio  
Frequency (RF) energy at a level that  
is hazardous to the user. In such a  
case, the FDA could require the  
manufacturers of wireless phones to  
notify users of the health hazard and  
to repair, replace, or recall the phones  
so that the hazard no longer exists.  
Although the existing scientific data  
does not justify FDA regulatory  
actions, the FDA has urged the  
wireless phone industry to take a  
number of steps, including the  
following:  
The FDA belongs to an interagency  
working group of the federal agencies  
that have responsibility for different  
aspects of RF safety to ensure  
coordinated efforts at the federal  
level. The following agencies belong  
to this working group:  
National Institute for Occupational  
Safety and Health  
Environmental Protection Agency  
Occupational Safety and Health  
Administration  
National Telecommunications and  
Information Administration  
The National Institutes of Health  
participates in some interagency  
working group activities, as well.  
The FDA shares regulatory  
responsibilities for wireless phones  
with the Federal Communications  
Commission (FCC). All phones that are  
sold in the United States must comply  
with FCC safety guidelines that limit RF  
Support needed research into  
possible biological effects of RF of  
the type emitted by wireless  
phones;  
78 VX5400  
exposure. The FCC relies on the FDA  
and other health agencies for safety  
questions about wireless phones.  
The FCC also regulates the base  
stations that the wireless phone  
networks rely upon. While these base  
stations operate at higher power than  
do the wireless phones themselves,  
the RF exposures that people get from  
these base stations are typically  
thousands of times lower than those  
they can get from wireless phones.  
Base stations are thus not the subject  
of the safety questions discussed in  
this document.  
exposure to RF is drastically lower  
because a person's RF exposure  
decreases rapidly with increasing  
distance from the source. The so-  
called “cordless phones,” which have  
a base unit connected to the  
telephone wiring in a house, typically  
operate at far lower power levels, and  
thus produce RF exposures far below  
the FCC safety limits.  
4. What are the results of the  
research done already?  
The research done thus far has  
produced conflicting results, and  
many studies have suffered from  
flaws in their research methods.  
Animal experiments investigating the  
effects of Radio Frequency (RF)  
3. What kinds of phones are the  
subject of this update?  
The term “wireless phone” refers  
here to handheld wireless phones  
with built-in antennas, often called  
“cell”, “mobile”, or “PCS” phones.  
These types of wireless phones can  
expose the user to measurable Radio  
Frequency (RF) energy because of the  
short distance between the phone  
and the user’s head.  
These RF exposures are limited by  
FCC safety guidelines that were  
developed with the advice of the FDA  
and other federal health and safety  
agencies. When the phone is located  
at greater distances from the user, the  
energy exposures characteristic of  
wireless phones have yielded  
conflicting results that often cannot  
be repeated in other laboratories. A  
few animal studies, however, have  
suggested that low levels of RF could  
accelerate the development of cancer  
in laboratory animals. However, many  
of the studies that showed increased  
tumor development used animals that  
had been genetically engineered or  
treated with cancer-causing  
chemicals so as to be pre-disposed to  
develop cancer in the absence of RF  
VX5400 79  
Safety  
exposure. Other studies exposed the  
animals to RF for up to 22 hours per  
day. These conditions are not similar  
to the conditions under which people  
use wireless phones, so we do not  
know with certainty what the results  
of such studies mean for human  
health. Three large epidemiology  
studies have been published since  
December 2000. Between them, the  
studies investigated any possible  
association between the use of  
needed. Lifetime animal exposure  
studies could be completed in a few  
years. However, very large numbers  
of animals would be needed to  
provide reliable proof of a cancer  
promoting effect, if one exists.  
Epidemiological studies can provide  
data that is directly applicable to  
human populations, but ten or more  
years follow-up may be needed to  
provide answers about some health  
effects, such as cancer. This is  
wireless phones and primary brain  
cancer, glioma, meningioma, or  
acoustic neuroma, tumors of the brain  
or salivary gland, leukemia, or other  
cancers. None of the studies  
because the interval between the time  
of exposure to a cancer-causing  
agent and the time tumors develop —  
if they do — may be many, many  
years. The interpretation of  
demonstrated the existence of any  
harmful health effects from wireless  
phone RF exposures. However, none  
of the studies can answer questions  
about long-term exposures, since the  
average period of phone use in these  
studies was around three years.  
epidemiological studies is hampered  
by difficulties in measuring actual RF  
exposure during day-to-day use of  
wireless phones. Many factors affect  
this measurement, such as the angle  
at which the phone is held, or which  
model of phone is used.  
5. What research is needed to  
decide whether RF exposure  
from wireless phones poses a  
health risk?  
6. What is the FDA doing to find out  
more about the possible health  
effects of wireless phone RF?  
The FDA is working with the U.S.  
National Toxicology Program and with  
groups of investigators around the  
world to ensure that high priority  
animal studies are conducted to  
A combination of laboratory studies  
and epidemiological studies of people  
actually using wireless phones would  
provide some of the data that are  
80 VX5400  
address important questions about  
the effects of exposure to Radio  
Frequency (RF) energy.  
research developments around the  
world.  
7. How can I find out how much  
Radio Frequency energy  
exposure I can get by using my  
wireless phone?  
The FDA has been a leading  
participant in the World Health  
Organization International Electro  
Magnetic Fields (EMF) Project since  
its inception in 1996. An influential  
result of this work has been the  
development of a detailed agenda of  
research needs that has driven the  
establishment of new research  
programs around the world. The  
project has also helped develop a  
series of public information  
All phones sold in the United States  
must comply with Federal  
Communications Commission (FCC)  
guidelines that limit Radio Frequency  
(RF) energy exposures. The FCC  
established these guidelines in  
consultation with the FDA and the  
other federal health and safety  
agencies. The FCC limit for RF  
exposure from wireless phones is set  
at a Specific Absorption Rate (SAR) of  
1.6 watts per kilogram (1.6 W/kg). The  
FCC limit is consistent with the safety  
standards developed by the Institute of  
Electrical and Electronic Engineering  
(IEEE) and the National Council on  
Radiation Protection and  
Measurement. The exposure limit  
takes into consideration the body’s  
ability to remove heat from the tissues  
that absorb energy from the wireless  
phone and is set well below levels  
known to have effects. Manufacturers  
of wireless phones must report the RF  
exposure level for each model of  
phone to the FCC. The FCC website  
documents on EMF issues.  
The FDA and the Cellular  
Telecommunications & Internet  
Association (CTIA) have a formal  
Cooperative Research And  
Development Agreement (CRADA) to  
do research on wireless phone safety.  
The FDA provides the scientific  
oversight, obtaining input from experts  
in government, industry, and  
academic organizations. CTIA-funded  
research is conducted through  
contracts with independent  
investigators. The initial research will  
include both laboratory studies and  
studies of wireless phone users. The  
CRADA will also include a broad  
assessment of additional research  
needs in the context of the latest  
VX5400 81  
Safety  
directions for locating the FCC  
identification number on your phone  
so you can find your phone’s RF  
exposure level in the online listing.  
laboratories on the same phone. SAR  
is the measurement of the amount of  
energy absorbed in tissue, either by  
the whole body or a small part of the  
body. It is measured in watts/kg (or  
milliwatts/g) of matter. This  
8. What has the FDA done to  
measure the Radio Frequency  
energy coming from wireless  
phones?  
measurement is used to determine  
whether a wireless phone complies  
with safety guidelines.  
9. What steps can I take to reduce  
my exposure to Radio Frequency  
energy from my wireless phone?  
The Institute of Electrical and  
Electronic Engineers (IEEE) is  
developing a technical standard for  
measuring the Radio Frequency (RF)  
energy exposure from wireless  
phones and other wireless handsets  
with the participation and leadership  
of FDA scientists and engineers. The  
standard, “Recommended Practice  
for Determining the Spatial-Peak  
Specific Absorption Rate (SAR) in the  
Human Body Due to Wireless  
If there is a risk from these products —  
and at this point we do not know that  
there is — it is probably very small. But  
if you are concerned about avoiding  
even potential risks, you can take a few  
simple steps to minimize your exposure  
to Radio Frequency (RF) energy. Since  
time is a key factor in how much  
exposure a person receives, reducing  
the amount of time spent using a  
wireless phone will reduce RF  
Communications Devices:  
Experimental Techniques”, sets forth  
the first consistent test methodology  
for measuring the rate at which RF is  
deposited in the heads of wireless  
phone users. The test method uses a  
tissue-simulating model of the human  
head. Standardized SAR test  
exposure. If you must conduct  
extended conversations by wireless  
phone every day, you could place more  
distance between your body and the  
source of the RF, since the exposure  
level drops off dramatically with  
distance. For example, you could use a  
headset and carry the wireless phone  
away from your body or use a wireless  
methodology is expected to greatly  
improve the consistency of  
measurements made at different  
82 VX5400  
phone connected to a remote antenna.  
Again, the scientific data does not  
demonstrate that wireless phones are  
harmful. But if you are concerned  
about the RF exposure from these  
products, you can use measures like  
those described above to reduce your  
RF exposure from wireless phone use.  
effects. Their recommendation to limit  
wireless phone use by children was  
strictly precautionary; it was not  
based on scientific evidence that any  
health hazard exists.  
11. What about wireless phone  
interference with medical  
equipment?  
10. What about children using  
wireless phones?  
Radio Frequency (RF) energy from  
wireless phones can interact with  
some electronic devices. For this  
reason, the FDA helped develop a  
detailed test method to measure  
Electro Magnetic Interference (EMI) of  
implanted cardiac pacemakers and  
defibrillators from wireless telephones.  
This test method is now part of a  
standard sponsored by the  
Association for the Advancement of  
Medical Instrumentation (AAMI). The  
final draft, a joint effort by the FDA,  
medical device manufacturers, and  
many other groups, was completed in  
late 2000. This standard will allow  
manufacturers to ensure that cardiac  
pacemakers and defibrillators are safe  
from wireless phone EMI.  
The scientific evidence does not show  
a danger to users of wireless phones,  
including children and teenagers. If  
you want to take steps to lower  
exposure to Radio Frequency (RF)  
energy, the measures described  
above would apply to children and  
teenagers using wireless phones.  
Reducing the time of wireless phone  
use and increasing the distance  
between the user and the RF source  
will reduce RF exposure.  
Some groups sponsored by other  
national governments have advised  
that children be discouraged from  
using wireless phones at all. For  
example, the government in the  
United Kingdom distributed leaflets  
containing such a recommendation in  
December 2000. They noted that no  
evidence exists that using a wireless  
phone causes brain tumors or other ill  
The FDA has tested hearing aids for  
interference from handheld wireless  
phones and helped develop a  
voluntary standard sponsored by the  
Institute of Electrical and Electronic  
VX5400 83  
Safety  
Engineers (IEEE). This standard  
specifies test methods and  
(http://www.who.int/emf)  
National Radiological Protection  
Board (UK)  
(http://www.nrpb.org.uk/)  
performance requirements for hearing  
aids and wireless phones so that no  
interference occurs when a person  
uses a “compatible” phone and a  
“compatible” hearing aid at the same  
time. This standard was approved by  
the IEEE in 2000.  
The FDA continues to monitor the use  
of wireless phones for possible  
interactions with other medical  
devices. Should harmful interference  
be found to occur, the FDA will  
conduct testing to assess the  
interference and work to resolve the  
problem.  
10 Driver Safety Tips  
Your wireless phone gives you the  
powerful ability to communicate by  
voice almost anywhere, anytime. An  
important responsibility accompanies  
the benefits of wireless phones, one  
that every user must uphold.  
When operating a car, driving is your  
first responsibility. When using your  
wireless phone behind the wheel of a  
car, practice good common sense and  
remember the following tips:  
12. Where can I find additional  
information?  
1. Get to know your wireless phone  
and its features such as speed dial  
and redial. Carefully read your  
instruction manual and learn to  
take advantage of valuable  
For additional information, please  
refer to the following resources:  
FDA web page on wireless phones  
(http://www.fda.gov/cellphones/)  
features most phones offer,  
including automatic redial and  
memory. Also, work to memorize  
the phone keypad so you can use  
the speed dial function without  
taking your attention off the road.  
Federal Communications Commission  
(FCC) RF Safety Program  
(http://www.fcc.gov/oet/rfsafety)  
International Commission on Non-  
lonizing Radiation Protection  
(http://www.icnirp.de)  
2. When available, use a hands-free  
device. A number of hands-free  
wireless phone accessories are  
readily available today. Whether  
World Health Organization (WHO)  
International EMF Project  
84 VX5400  
you choose an installed mounted  
device for your wireless phone or a  
speaker phone accessory, take  
advantage of these devices if  
available to you.  
nearby vehicles.  
6. Dial sensibly and assess the traffic;  
if possible, place calls when you  
are not moving or before pulling  
into traffic. Try to plan your calls  
before you begin your trip or  
attempt to coincide your calls with  
times you may be stopped at a stop  
sign, red light, or otherwise  
stationary. But if you need to dial  
while driving, follow this simple tip  
-- dial only a few numbers, check  
the road and your mirrors, then  
continue.  
3. Make sure you place your wireless  
phone within easy reach and  
where you can reach it without  
removing your eyes from the road.  
If you get an incoming call at an  
inconvenient time, if possible, let  
your voicemail answer it for you.  
4. Suspend conversations during  
hazardous driving conditions or  
situations. Let the person you are  
speaking with know you are  
driving; if necessary, suspend the  
call in heavy traffic or hazardous  
weather conditions. Rain, sleet,  
snow, and ice can be hazardous,  
but so is heavy traffic. As a driver,  
your first responsibility is to pay  
attention to the road.  
7. Do not engage in stressful or  
emotional conversations that may  
be distracting. Stressful or  
emotional conversations and  
driving do not mix; they are  
distracting and even dangerous  
when you are behind the wheel of  
a car. Make people you are talking  
with aware you are driving and if  
necessary, suspend conversations  
which have the potential to divert  
your attention from the road.  
5. Don’t take notes or look up phone  
numbers while driving. If you are  
reading an address book or  
business card, or writing a “to-do”  
list while driving a car, you are not  
watching where you are going. It is  
common sense. Do not get caught  
in a dangerous situation because  
you are reading or writing and not  
paying attention to the road or  
8. Use your wireless phone to call for  
help. Your wireless phone is one of  
the greatest tools you can own to  
protect yourself and your family in  
dangerous situations -- with your  
phone at your side, help is only  
three numbers away. Dial 911 or  
VX5400 85  
Safety  
other local emergency number in  
the case of fire, traffic accident,  
road hazard, or medical  
emergency. Remember, it’s a free  
call on your wireless phone!  
number.  
The above tips are meant as general  
guidelines. Before deciding to use  
your mobile device while operating a  
vehicle, it is recommended that you  
consult your applicable jurisdiction’s  
local laws or other regulations  
regarding such use. Such laws or  
other regulations may prohibit or  
otherwise restrict the manner in  
which a driver may use his or her  
phone while operating a vehicle.  
9. Use your wireless phone to help  
others in emergencies. Your  
wireless phone provides you a  
perfect opportunity to be a “Good  
Samaritan” in your community. If  
you see an auto accident, crime in  
progress or other serious  
emergency where lives are in  
danger, call 911 or other local  
emergency number, as you would  
want others to do for you.  
Consumer  
Information on SAR  
(Specific Absorption Rate)  
This model phone meets the  
government's requirements for  
exposure to radio waves. Your  
10.Call roadside assistance or a  
special wireless non-emergency  
assistance number when  
necessary. Certain situations you  
encounter while driving may  
require attention, but are not  
urgent enough to merit a call for  
emergency services. But you can  
still use your wireless phone to  
lend a hand. If you see a broken-  
down vehicle posing no serious  
hazard, a broken traffic signal, a  
minor traffic accident where no  
one appears injured or a vehicle  
you know to be stolen, call  
wireless phone is a radio transmitter  
and receiver. It is designed and  
manufactured not to exceed the  
emission limits for exposure to Radio  
Frequency (RF) energy set by the  
Federal Communications Commission  
of the U.S. Government. These limits  
are part of comprehensive guidelines  
and establish permitted levels of RF  
energy for the general population. The  
guidelines are based on standards  
that were developed by independent  
scientific organizations through  
roadside assistance or other  
special non-emergency wireless  
86 VX5400  
periodic and thorough evaluation of  
scientific studies. The standards  
include a substantial safety margin  
designed to assure the safety of all  
persons, regardless of age and health.  
The exposure standard for wireless  
mobile phones employs a unit of  
measurement known as the Specific  
Absorption Rate, or SAR. The SAR  
limit set by the FCC is 1.6 W/kg. Tests  
for SAR are conducted using standard  
operating positions specified by the  
FCC with the phone transmitting at its  
highest certified power level in all  
tested frequency bands. Although  
SAR is determined at the highest  
certified power level, the actual SAR  
level of the phone while operating can  
be well below the maximum value.  
Because the phone is designed to  
operate at multiple power levels to  
use only the power required to reach  
the network, in general, the closer you  
are to a wireless base station  
antenna, the lower the power output.  
Before a phone model is available for  
sale to the public, it must be tested  
and certified to the FCC that it does not  
exceed the limit established by the  
government-adopted requirement for  
safe exposure. The tests are  
performed in positions and locations  
(e.g., at the ear and worn on the body)  
as required by the FCC for each model.  
The highest SAR value for this model  
phone when tested for use at the ear  
is 1.27 W/kg and when worn on the  
body, as described in this user guide,  
is 0.693 W/kg (body-worn  
measurements differ among phone  
models, depending upon available  
accessories and FCC requirements).  
While there may be differences  
between SAR levels of various  
phones and at various positions, they  
all meet the government requirement  
for safe exposure.  
The FCC has granted an Equipment  
Authorization for this model phone  
with all reported SAR levels evaluated  
as in compliance with the FCC RF  
emission guidelines. SAR information  
on this model phone is on file with the  
FCC and can be found under the  
Display Grant section of  
searching on FCC ID BEJVX5400.  
Additional information on Specific  
Absorption Rates (SAR) can be found  
on the Cellular Telecommunications  
Industry Association (CTIA) website at  
* In the United States and Canada, the  
SAR limit for mobile phones used by  
the public is 1.6 watts/kg (W/kg)  
averaged over one gram of tissue.  
The standard incorporates a  
substantial margin of safety to give  
VX5400 87  
Safety  
additional protection for the public  
and to account for any variations in  
measurements.  
device users find phones that may be  
compatible with their hearing devices.  
Not all phones have been rated.  
Phones that are rated have the rating  
on their box or a label located on the  
box.  
The ratings are not guarantees.  
Results will vary depending on the  
user’s hearing device and hearing  
loss. If your hearing device happens  
to be vulnerable to interference, you  
may not be able to use a rated phone  
successfully. Trying out the phone  
with your hearing device is the best  
way to evaluate it for your personal  
needs.  
M-Ratings: Phones rated M3 or M4  
meet FCC requirements and are likely  
to generate less interference to  
hearing devices than phones that are  
not labeled. M4 is the better/higher of  
the two ratings.  
T-Ratings: Phones rated T3 or T4 meet  
FCC requirements and are likely to  
generate less interference to hearing  
devices than phones that are not  
labeled. T4 is the better/higher of the  
two ratings.  
FCC Hearing-Aid  
Compatibility (HAC)  
Regulations for  
Wireless Devices  
On July 10, 2003, the U.S. Federal  
Communications Commission (FCC)  
Report and Order in WT Docket 01-309  
modified the exception of wireless  
phones under the Hearing Aid  
Compatibility Act of 1988 (HAC Act) to  
require digital wireless phones be  
compatible with hearing-aids. The  
intent of the HAC Act is to ensure  
reasonable access to  
telecommunications services for  
persons with hearing disabilities.  
While some wireless phones are used  
near some hearing devices (hearing  
aids and cochlear implants), users  
may detect a buzzing, humming, or  
whining noise. Some hearing devices  
are more immune than others to this  
interference noise, and phones also  
vary in the amount of interference  
they generate.  
Hearing devices may also be rated.  
Your hearing device manufacturer or  
hearing health professional may help  
you find this rating. Higher ratings  
mean that the hearing device is  
relatively immune to interference  
The wireless telephone industry has  
developed a rating system for  
wireless phones, to assist hearing  
88 VX5400  
noise. The hearing aid and wireless  
phone rating values are then added  
together. A sum of 5 is considered  
acceptable for normal use. A sum of 6  
is considered for best use.  
Solutions (ATIS). The U and UT marks  
are referenced in Section 20.19 of the  
FCC Rules. The HAC rating and  
measurement procedure are  
described in the American National  
Standards Institute (ANSI) C63.19  
standard.  
To ensure that the Hearing Aid  
Compatibility rating for your phone is  
maintained, secondary transmitters  
such as Bluetooth and WLAN  
components must be disabled during  
a call. See Page 50 for instructions to  
disable these components.  
For information about hearing  
aids and digital wireless phones  
In the above example, if a hearing aid  
meets the M2 level rating and the  
wireless phone meets the M3 level  
rating, the sum of the two values  
equal M5. This is synonymous for T  
ratings. This should provide the  
hearing aid user with “normal usage”  
while using their hearing aid with the  
particular wireless phone. “Normal  
usage” in this context is defined as a  
signal quality that is acceptable for  
normal operation.  
FCC Hearing Aid Compatibility  
and Volume Control  
Gallaudet University, RERC  
http://tap.gallaudet.edu/DigWireless.K  
S/DigWireless.htm  
HLAA (Hearing Loss Association  
of America)  
phonetech.asp  
The M mark is intended to be  
synonymous with the U mark. The T  
mark is intended to be synonymous  
with the UT mark. The M and T marks  
are recommended by the Alliance for  
Telecommunications Industries  
The Hearing Aid Compatibility  
FCC Order  
/attachmatch/FCC-03-168A1.pdf  
VX5400 89  
Accessories  
There are a variety of accessories available for your phone and three easy ways  
1866 VZ GOT IT (894 6848) or visit one of our Verizon Wireless Communication  
Stores.  
Chargers  
Battery  
Bluetooth Mono  
headset  
Holster  
90 VX5400  
Limited Warranty Statement  
1. WHAT THIS WARRANTY  
COVERS:  
limited warranty terms.  
(5) Upon request from LG, the  
LG offers you a limited warranty that  
the enclosed subscriber unit and its  
enclosed accessories will be free  
from defects in material and  
workmanship, according to the  
following terms and conditions:  
consumer must provide information  
to reasonably prove the date of  
purchase.  
(6) The customer shall bear the cost of  
shipping the product to the  
Customer Service Department of  
LG. LG shall bear the cost of  
shipping the product back to the  
consumer after the completion of  
service under this limited warranty.  
(1) The limited warranty for the  
product extends for TWELVE (12)  
MONTHS beginning on the date of  
purchase of the product with valid  
proof of purchase, or absent valid  
proof of purchase, FIFTEEN (15)  
MONTHS from date of  
2. WHAT THIS WARRANTY DOES  
NOT COVER:  
manufacture as determined by the  
unit's manufacture date code.  
(1) Defects or damages resulting from  
use of the product in other than its  
normal and customary manner.  
(2) The limited warranty extends only  
to the original purchaser of the  
product and is not assignable or  
transferable to any subsequent  
purchaser/end user.  
(2) Defects or damages from abnormal  
use, abnormal conditions, improper  
storage, exposure to moisture or  
dampness, unauthorized  
(3) This warranty is good only to the  
original purchaser of the product  
during the warranty period as long  
as it is in the U.S., including Alaska,  
Hawaii, U.S. Territories and  
Canada.  
modifications, unauthorized  
connections, unauthorized repair,  
misuse, neglect, abuse, accident,  
alteration, improper installation, or  
other acts which are not the fault  
of LG, including damage caused by  
shipping, blown fuses, spills of food  
or liquid.  
(4) The external housing and cosmetic  
parts shall be free of defects at the  
time of shipment and, therefore,  
shall not be covered under these  
VX5400 91  
Limited Warranty Statement  
(3) Breakage or damage to antennas  
3. WHAT LG WILL DO:  
unless caused directly by defects  
in material or workmanship.  
LG will, at its sole option, either repair,  
replace or refund the purchase price  
of any unit that does not conform to  
this limited warranty. LG may choose  
at its option to use functionally  
equivalent re-conditioned, refurbished  
or new units or parts or any units. In  
addition, LG will not re-install or back-  
up any data, applications or software  
that you have added to your phone. It  
is therefore recommended that you  
back-up any such data or information  
prior to sending the unit to LG to avoid  
the permanent loss of such  
(4) That the Customer Service  
Department at LG was not notified  
by consumer of the alleged defect  
or malfunction of the product  
during the applicable limited  
warranty period.  
(5) Products which have had the serial  
number removed or made illegible.  
(6) This limited warranty is in lieu of all  
other warranties, express or  
implied either in fact or by  
operations of law, statutory or  
otherwise, including, but not limited  
to any implied warranty of  
marketability or fitness for a  
particular use.  
information.  
4. STATE LAW RIGHTS:  
No other express warranty is  
applicable to this product. THE  
DURATION OF ANY IMPLIED  
WARRANTIES, INCLUDING THE  
IMPLIED WARRANTY OF  
MARKETABILITY, IS LIMITED TO THE  
DURATION OF THE EXPRESS  
WARRANTY HEREIN. LG SHALL NOT  
BE LIABLE FOR THE LOSS OF THE  
USE OF THE PRODUCT,  
INCONVENIENCE, LOSS OR ANY  
OTHER DAMAGES, DIRECT OR  
CONSEQUENTIAL, ARISING OUT OF  
THE USE OF, OR INABILITY TO USE,  
THIS PRODUCT OR FOR ANY BREACH  
(7) Damage resulting from use of non  
LG approved accessories.  
(8) All plastic surfaces and all other  
externally exposed parts that are  
scratched or damaged due to  
normal customer use.  
(9) Products operated outside  
published maximum ratings.  
(10) Products used or obtained in a  
rental program.  
(11) Consumables (such as fuses).  
92 VX5400  
OF ANY EXPRESS OR IMPLIED  
WARRANTY, INCLUDING THE  
IMPLIED WARRANTY OF  
MARKETABILITY APPLICABLE TO  
THIS PRODUCT.  
Some states do not allow the  
exclusive limitation of incidental or  
consequential damages or limitations  
on how long an implied warranty  
lasts; so these limitations or  
DO NOT RETURN YOUR PRODUCT  
TO THE ABOVE ADDRESS. Please  
call or write for the location of the LG  
authorized service center nearest you  
and for the procedures for obtaining  
warranty claims.  
exclusions may not apply to you. This  
warranty gives you specific legal  
rights and you may also have other  
rights which vary from state to state.  
5. HOW TO GET WARRANTY  
SERVICE:  
To obtain warranty service, please  
call or fax to the following telephone  
numbers from anywhere in the  
continental United States:  
Tel. 1-800-793-8896 or Fax. 1-800-  
448-4026  
Correspondence may also be mailed  
to:  
LG Electronics Service- Mobile  
Handsets, P.O. Box 240007, Huntsville,  
AL 35824  
VX5400 93  
Glossary  
Terminology  
EZ Tip Calc  
Acronyms and  
Abbreviations  
Feature for easy bill calculation using  
the total cost, tip, and number of  
people as variables.  
DTMF  
D
ual-  
T
one  
M
ulti Frequency  
(or “touch-tone”) is a method  
used to communicate keys  
pressed on the phone.  
Pressing a key generates  
two simultaneous tones, one  
for the row and one for the  
column to determine which  
key was pressed.  
Advanced Voice Recognition  
Feature that allows you to perform a  
wide range of verbal commands by  
training the phone to recognize your  
individual speech patterns.  
ERI  
E
nhanced  
R
oaming Indicator  
®
Bluetooth wireless technology  
is a feature to indicate  
Technology used to allow mobile  
phones, computers, and other  
personal devices to be easily  
coordinated and interconnected using  
a short-range wireless connection.  
whether a mobile phone is on  
its home system, a partner  
network, or a roaming  
network. Many phones  
indicate home vs. roaming as  
an icon, but ERI capable  
phones can clearly indicate  
third “partner network” status.  
®
Get It Now  
Feature that accesses the Internet to  
provide the ability to access and even  
download a wide variety of software,  
information and more right on your LG  
Verizon wireless phone.  
GPS  
G
lobal  
Positioning System is  
a system of satellites,  
computers, and receivers  
able to determine the latitude  
and longitude of a specific  
receiver on Earth. Position is  
calculated using time and  
distance.  
94 VX5400  
IS 2000 Type of digital signaling. It's the  
second generation of CDMA  
digital cellular, an extension of  
IS-95. Differences between  
signaling types have to do with  
pilot signal and links to provide  
more traffic channels, and  
control protocols.  
NAM  
Number  
Assignment  
Module  
is how the phone stores the  
phone number and its  
electronic serial number.  
SSL  
TTY  
S
ecure  
S
ockets Layer  
Protocol used to encrypt data  
sent over the air.  
Teletypewriter. An  
electromechanical typewriter  
that either transmits or receives  
messages coded in electrical  
signals. A phone with TTY  
support is able to translate  
typed characters to voice or  
translate voice into characters  
to display on the TTY.  
VX5400 95  
Index  
10 Driver Safety Tips 84  
E
M
Email 37  
Making Calls 17  
Master Volume 54  
Memory 67  
A
Erasing Messages 39  
Extras 30  
Accessories 90  
Acronyms and Abbreviations  
94  
Ez Tip Calc 50  
Menus Overview 14  
MESSAGING 31  
Missed 43  
Add New Device 50  
Alarm Clock 48  
Alert Sounds 55  
All 44  
F
FCC Hearing-Aid  
Compatibility (HAC)  
Regulations for Wireless  
Devices 88  
Mobile IM 37  
MSG Settings 38  
Mute Function 19  
My Account 46  
My Name Card 42  
My Number 67  
My Pictures 27  
My Ringtones 25  
My Sounds 26  
Answer Options 64  
Auto NAM 64  
Auto Retry 64  
FDA Consumer Update 77  
G
B
Games 28  
Backlight 57  
GET IT NOW 25  
Get New Pictures 26  
Get New Ringtones 25  
Glossary 94  
Banner 56  
Battery Charge Level 17  
Bluetooth Menu 50  
N
NAM Select 63  
New Contact 40  
New Message 31  
News & Info 28  
Notepad 49  
Groups 40  
C
Calculator 47  
Calendar 48  
I
Icon Glossary 68  
Call Settings 64  
Call Sounds 54  
Call Waiting 19  
Charging the Battery 16  
Chat 37  
Important Safety Precautions  
1
O
In Case of Emergency (ICE)  
One Touch Dial 66  
41  
Inbox 34  
P
Clock Format 58  
Consumer Information on  
SAR 86  
Phone Info 67  
Phone Overview 12  
Phone Settings 59  
Picture Message 32  
Pictures 26  
K
Keypad Volume 55  
Contact List 40  
CONTACTS 40  
L
Language 60  
PIX Place 28  
Limited Warranty Statement  
D
Power On/Off 56  
91  
Dial Fonts 58  
Dialed 44  
Location 60  
Display Settings 56  
Display Themes 58  
Drafts 36  
96 VX5400  
R
Voicemail 36  
Received 43  
Receiving Calls 18  
RECENT CALLS 43  
Volume Quick Adjustment 19  
W
Wallpaper 57  
World Clock 49  
S
Safety Information 72  
Screen Icons 18  
Security 61  
Sent 35  
Service Alerts 56  
Set Shortcut Keys 59  
SETTINGS & TOOLS 46  
Signal Strength 17  
Sounds Settings 54  
Speed Dialing 24  
Speed Dials 41  
Standalone Mode 59  
Stopwatch 49  
SW/HW Version 68  
System Select 63  
T
Take Picture 27  
Technical Details 9  
Terminology 94  
TIA Safety Information 69  
Tools 46  
Tools on the Go 30  
TTY Mode 65  
Tunes & Tones 25  
TXT Message 31  
V
Vibrate Mode 19  
View Timers 45  
Voice Commands 19, 46, 60  
Voice Privacy 66  
VX5400 97  

Nokia 3555 User Manual
Mr Coffee NC Series User Manual
Motorola MILESTONE XT300 User Manual
Marantz SA8001 User Manual
Lindy 32573 User Manual
JVC KD S51 User Manual
JVC KD AR760 User Manual
HP Hewlett Packard D2D2503i User Manual
DeLonghi EAM3200S User Manual
Casio TQ 131U User Manual