0 0 4 3 X V
o i r a u s U l e D a í u G
User Guide
VX3400
Important Safety Precautions
Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed
information is given in this user guide.
Violation of the instructions may cause serious injury or death.
●
Never use an unapproved battery since this could damage the phone and/or battery and
could cause the battery to explode.
●
Never place your phone in a microwave oven as it will cause the battery to explode.
●
Never store your phone in temperatures less than -4°F or greater than 122°F.
●
Do not dispose of your battery by fire or with hazardous or flammable materials.
●
When riding in a car, do not leave your phone or set up the hands-free kit near to the air
bag. If wireless equipment is improperly installed and the air bag is deployed, you may be
seriously injured.
●
Do not use a hand-held phone while driving.
●
Do not use the phone in areas where its use is prohibited. (For example: aircraft)
VX3400 1
Important Safety Precautions
●
●
●
Do not expose the battery charger or adapter to direct sunlight or use it in places with
high humidity, such as a bathroom.
Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to
clean your phone. This could cause a fire.
Do not drop, strike, or shake your phone severely. It may harm the internal circuit boards
of the phone.
●
●
Do not use your phone in high explosive areas as the phone may generate sparks.
Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the
plug if it is loose as it may cause a fire or electric shock.
●
●
●
Do not place any heavy items on the power cord. Do not allow the power cord to be
crimped as it may cause electric shock or fire.
Do not handle the phone with wet hands while it is being charged. It may cause an
electric shock or seriously damage your phone.
Do not disassemble the phone.
2 VX3400
●
Do not place or answer calls while charging the phone as it may short-circuit the phone
and/or cause electric shock or fire.
●
●
Do not hold or let the antenna come in contact with your body during a call.
Make sure that no sharp-edged items such as animal’s teeth or nails, come into contact with
the battery. This could cause a fire.
●
●
Store the battery out of reach of children.
Be careful that children do not swallow any parts (such as rubber plugs, earphone,
connection parts of the phone, etc.) This could cause asphyxiation or suffocation resulting
in serious injury or death.
●
●
Unplug the power cord and charger during lightning storms to avoid electric shock or fire.
Only use the batteries and chargers provided by LG. The warranty will not be applied to
products provided by other suppliers.
●
●
Only authorized personnel should service the phone and its accessories. Faulty installation
or service may result in accidents and consequently invalidate the warranty.
An emergency call can be made only within a service area. For an emergency call, make
sure that you are within a service area and that the phone is turned on.
VX3400 3
Table of Contents
Menu Access . . . . . . . . . . . . . . . . . . . . . 26
Welcome . . . . . . . . . . . . . . . . . . . . . . . . 7
Caller ID . . . . . . . . . . . . . . . . . . . . . . . . 17
Speed Dialing . . . . . . . . . . . . . . . . . . 17
Important Information . . . . . . . . . . . . .7
FCC RF Exposure Information . . . . . . 9
1. Contacts . . . . . . . . . . . . . . . . . . . . . . 26
1. List Contacts . . . . . . . . . . . . . . . . . . . . 27
2. New Number . . . . . . . . . . . . . . . . . . . 27
3. New E-mail . . . . . . . . . . . . . . . . . . . . . 27
4. Groups . . . . . . . . . . . . . . . . . . . . . . . . . . 28
5. Speed Dials . . . . . . . . . . . . . . . . . . . . . 28
6. Voice Dials . . . . . . . . . . . . . . . . . . . . . . 28
7. My VCard . . . . . . . . . . . . . . . . . . . . . . 29
8. In Case of Emergency . . . . . . . . . . . .29
Entering and Editing Informaation . . 18
Text Input . . . . . . . . . . . . . . . . . . . . . . .18
Phone Overview . . . . . . . . . . . . . . . . .10
Menus Overview . . . . . . . . . . . . . . . . 12
Contacts in Your Phone’s
Memory . . . . . . . . . . . . . . . . . . . . . . . . 20
Getting Started with Your Phone . . . 13
The Battery . . . . . . . . . . . . . . . . . . . . . 13
Charging the Battery . . . . . . . . . . . . . 13
Turning the Phone On and Off . . . . 14
Screen Icons . . . . . . . . . . . . . . . . . . . .15
Making Calls . . . . . . . . . . . . . . . . . . . . 15
Storing Basics . . . . . . . . . . . . . . . . . . 20
Customizing Individual Entries . . . . 20
Speed Dial . . . . . . . . . . . . . . . . . . . . . . 21
Storing a Number with Pause . . . . 21
Adding Another Phone Number . . .22
Adding a Pause to a Contact Entry .22
Changing Saved Information . . . . . 23
Changing the Default Number . . . . 23
Deleting . . . . . . . . . . . . . . . . . . . . . . . . 23
Searching Your Phone’s Memory . 24
Calling From Your Phone’s Memory . . 25
Speed Dialing . . . . . . . . . . . . . . . . . . . 25
2. Recent Calls . . . . . . . . . . . . . . . . . . 30
1. Dialed Calls . . . . . . . . . . . . . . . . . . . . .30
2. Received Calls . . . . . . . . . . . . . . . . . . 31
3. Missed Calls . . . . . . . . . . . . . . . . . . . . 31
4. Blocked Calls* . . . . . . . . . . . . . . . . . . .31
5. Erase Calls . . . . . . . . . . . . . . . . . . . . . . 32
6. Call Timer . . . . . . . . . . . . . . . . . . . . . . . 32
Quick Access to Convenient
Features .. . . . . . . . . . . . . . . . . . . . . . . . 16
Receiving Calls . . . . . . . . . . . . . . . . . 16
Manner Mode . . . . . . . . . . . . . . . . . 16
Lock Mode . . . . . . . . . . . . . . . . . . . . . . 16
Mute Function . . . . . . . . . . . . . . . . . . 17
Volume Quick Adjustment . . . . . . . . 17
Call Waiting . . . . . . . . . . . . . . . . . . . . . 17
Available only when all incoming calls or
*
incoming calls from your Contacts are
restricted in Menu-> Settings-> Security->
Restrictions-> Calls-> Incoming Calls.
4 VX3400
3. Messages . . . . . . . . . . . . . . . . . . . . 32
1. Voice Mail . . . . . . . . . . . . . . . . . . . . . .33
2. New Message . . . . . . . . . . . . . . . . . . 33
3. Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
4. Outbox . . . . . . . . . . . . . . . . . . . . . . . . . . 37
5. Saved . . . . . . . . . . . . . . . . . . . . . . . . . . .37
6. Msg Settings . . . . . . . . . . . . . . . . . . . .38
4. Media . . . . . . . . . . . . . . . . . . . . . . . . 40
1. Small Pictures . . . . . . . . . . . . . . . . . . .40
2. Large Pictures . . . . . . . . . . . . . . . . . . .40
3. My Pictures . . . . . . . . . . . . . . . . . . . . . .41
4. Sounds . . . . . . . . . . . . . . . . . . . . . . . . . .41
5. My Melodies . . . . . . . . . . . . . . . . . . . . .41
6. Animations . . . . . . . . . . . . . . . . . . . . . .41
7. My Animations . . . . . . . . . . . . . . . . . . .42
8. Melody Composer . . . . . . . . . . . . . . . .42
6. Settings . . . . . . . . . . . . . . . . . . . . . . .46
1. Sounds . . . . . . . . . . . . . . . . . . . . . . . .47
1.1 Ringers . . . . . . . . . . . . . . . . . . . . . .47
1.2 Key Tone . . . . . . . . . . . . . . . . . . . .47
1.3 Volume . . . . . . . . . . . . . . . . . . . . . .47
1.4 Message Alerts . . . . . . . . . . . . . .47
1.5 Service Alerts . . . . . . . . . . . . . . . .48
1.6 Power On/Off Tone . . . . . . . . . . . 48
1.7 DTMF Length . . . . . . . . . . . . . . . . 48
2. Display . . . . . . . . . . . . . . . . . . . . . . . 49
2.1 Banner . . . . . . . . . . . . . . . . . . . . . . .49
2.2 Backlight . . . . . . . . . . . . . . . . . . . .49
2.3 Screens . . . . . . . . . . . . . . . . . . . . . 50
2.4 Menu Style . . . . . . . . . . . . . . . . . . 50
2.5 Clocks . . . . . . . . . . . . . . . . . . . . . .50
2.6 Theme Colors . . . . . . . . . . . . . . . . 50
2.7 Contrast . . . . . . . . . . . . . . . . . . . . 50
2.8 Fonts . . . . . . . . . . . . . . . . . . . . . . . . .50
2.9 Language . . . . . . . . . . . . . . . . . . . 51
2.0 Power Saver . . . . . . . . . . . . . . . .51
Message Settings Sub-Menu
Descriptions . . . . . . . . . . . . . . . . . . . . . . .38
6.1 Auto Save . . . . . . . . . . . . . . . . . . . .38
6.2 Auto Delete . . . . . . . . . . . . . . . . . . .38
5. Tools . . . . . . . . . . . . . . . . . . . . . . . . . 43
1. Schedule . . . . . . . . . . . . . . . . . . . . . . .43
2. Alarm Clock . . . . . . . . . . . . . . . . . . . . .44
3. Voice Memo . . . . . . . . . . . . . . . . . . . . 44
4. My Shortcut . . . . . . . . . . . . . . . . . . . . 45
5. Notepad . . . . . . . . . . . . . . . . . . . . . . . . .45
6. Ez Tip Calc . . . . . . . . . . . . . . . . . . . . . .45
7. Calculator . . . . . . . . . . . . . . . . . . . . . . .45
8. World Clock . . . . . . . . . . . . . . . . . . . . .46
9. Unit Converter . . . . . . . . . . . . . . . . . . .46
6.3 Callback #
. . . . . . . . . . . . . . . . . . .38
6.4 Voice Mailbox # . . . . . . . . . . . . . . .38
6.5 Signature . . . . . . . . . . . . . . . . . . . . . .38
6.6 Auto View . . . . . . . . . . . . . . . . . . . . . .39
6.7 Entry Mode . . . . . . . . . . . . . . . . . . . . .39
6.8 Quick-Text . . . . . . . . . . . . . . . . . . . . .39
6.9 Auto Play . . . . . . . . . . . . . . . . . . . . . .39
7. Erase All . . . . . . . . . . . . . . . . . . . . . . . .39
VX3400 5
Table of Contents
3. System . . . . . . . . . . . . . . . . . . . . . . . 51
6. Standalone Mode . . . . . . . . . . . . .57
7. Voice Services . . . . . . . . . . . . . . . . .57
7.1 Voice Dial Prompt . . . . . . . . . . . . .57
7.2 Train Words . . . . . . . . . . . . . . . .58
8. Location . . . . . . . . . . . . . . . . . . . . . . .58
9. Phone Info . . . . . . . . . . . . . . . . . . . .58
9.1 My Phone Number . . . . . . . . . . .58
9.2 S/W Version . . . . . . . . . . . . . . . . .58
9.3 Icon Glossary . . . . . . . . . . . . . . .58
9.4 Shortcut Help . . . . . . . . . . . . . . . 58
Hearing Aids . . . . . . . . . . . . . . . . . . . .60
Other Medical Devices . . . . . . . . . . 60
Health Care Facilities . . . . . . . . . . . . 60
Vehicles . . . . . . . . . . . . . . . . . . . . . . . . 60
Posted Facilities . . . . . . . . . . . . . . . . 60
Aircraft . . . . . . . . . . . . . . . . . . . . . . . . . 60
Blasting Areas . . . . . . . . . . . . . . . . . .61
Potentially Explosive Atmosphere 61
3.1 Select System . . . . . . . . . . . . . . . .51
3.2 Set NAM . . . . . . . . . . . . . . . . . . . . 51
3.3 Auto NAM . . . . . . . . . . . . . . . . . . 52
3.4 Serving System . . . . . . . . . . . . . . .52
4. Security . . . . . . . . . . . . . . . . . . . . . .52
4.1 Lock Phone . . . . . . . . . . . . . . . . . .52
4.2 Restrictions . . . . . . . . . . . . . . . . . . 53
4.3 Emergency #s . . . . . . . . . . . . . . . .53
4.4 Edit Codes . . . . . . . . . . . . . . . . . . . 53
4.5 Erase Contacts . . . . . . . . . . . . . . 54
4.6 Reset Default . . . . . . . . . . . . . . . . .54
5. Call Setup . . . . . . . . . . . . . . . . . . . .54
5.1 Auto Retry . . . . . . . . . . . . . . . . . 54
5.2 Answer Call . . . . . . . . . . . . . . . . 54
5.3 Auto Answer . . . . . . . . . . . . . . . . . 55
5.4 One-Touch Dial . . . . . . . . . . . . . . 55
5.5 Voice Privacy . . . . . . . . . . . . . . . . 55
5.6 Auto Volume . . . . . . . . . . . . . . . . .55
5.7 TTY Mode . . . . . . . . . . . . . . . . . . 55
For Vehicles Equipped with an
Air Bag . . . . . . . . . . . . . . . . . . . . . . . . .61
Safety Information . . . . . . . . . . . . . . . 61
FDA Consumer Update . . . . . . . . . . . 63
10 Driver Safety Tips . . . . . . . . . . . . .68
Consumer Information on SAR . . . 70
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices . 71
Accessories . . . . . . . . . . . . . . . . . . . . 73
LIMITED WARRANTY STATEMENT . . 74
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Glossary . . . . . . . . . . . . . . . . . . . . . . . . 78
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . 59
TIA Safety Information . . . . . . . . . . .59
Exposure to Radio
Frequency Signal . . . . . . . . . . . . . . . .59
Antenna Care . . . . . . . . . . . . . . . . . . . .59
Phone Operation . . . . . . . . . . . . . . . . .59
Tips on Efficient Operation . . . . . . . .59
Driving . . . . . . . . . . . . . . . . . . . . . . . . . .59
Electronic Devices . . . . . . . . . . . . . . 60
Pacemakers . . . . . . . . . . . . . . . . . . . 60
6 VX3400
Welcome
Congratulations for choosing the advanced and
compact VX3400 cellular phone designed to operate
with the latest digital mobile communication
technology, Code Division Multiple Access (CDMA)
and Advanced Mobile Phone Service (AMPS).
Along with the many advanced features of the
CDMA system, such as greatly enhanced voice
clarity, this phone offers:
Important Information
This user’s guide provides important information on
the use and operation of your phone. Please read
all the information carefully prior to using the phone
for the best performance and to prevent any
accidental damage or misuse. Any unapproved
changes or modifications will void your warranty.
FCC Part 15 Class B Compliance
This device and its accessories comply with part 15
of FCC rules. Operation is subject to the following
two conditions: (1) This device and its accessories
may not cause harmful interference, and (2) this
device and its accessories must accept any
interference received, including interference that
causes undesired operation.
● Melody Composer capability.
● Large, easy-to-read, 7-line backlit LCD with status
icons.
● Paging, messaging, voice mail, and caller ID.
● 22-key keypad.
● Speakerphone feature.
Technical Details
● Menu-driven interface with prompts for easy
operation and configuration.
The VX3400 is an all digital phone that operates on
both Code Division Multiple Access (CDMA)
frequencies: cellular services at 800 Mhz and
Personal Communication Services (PCS) at 1.9 Ghz.
Also, the VX3400 works on Advanced Mobile Phone
Service (AMPS). We call it a tri-mode phone. Since
the phone operates on Cellular, PCS and AMPS, the
call fail rate is less than on a conventional dual-
● Any key answer, auto answer, auto retry, one-
touch and speed dialing with 99 memory
locations.
● Bilingual (English and Spanish) capabilities.
VX3400 7
Welcome
mode or singlemode phone.
CDMA
Designator
Description
Standard
CDMA technology uses a feature called DSSS
(Direct Sequence Spread Spectrum) that enables
the phone to keep communication from being
crossed and to use one frequency channel by
multiple users in the same specific area. This
results in a 10-fold capacity increase when
compared with analog mode. In addition, features
such as soft / softer handoff, hard Handoff, and
dynamic RF power control technologies combine
to reduce call interruptions.
The Cellular and PCS CDMA networks consist of
MSO (Mobile Switching Office), BSC (Base Station
Controller), BTS (Base Station Transmission
System), and MS (Mobile Station).
CDMA Tri-Mode Air Interface
14.4kbps radio link protocol and
inter-band operations
IS-95 adapted for PCS frequency
band
TIA/EIA-95A
TSB-74
Basic Air
Interface
ANSI J-STD-008
cdma2000 1xRTT AirInterface
Advanced Mobile Phone Service
TIA/EIA-IS2000
ANSI TIA/EIA 553A
MAS-BS
TIA/EIA/IS-634
TIA/EIA/IS/651
TIA/EIA/IS-41-C
TIA/EIA/IS-124
PCSC-RS
Intersystem operations
Non-signaling data comm.
Network
Service
TIA/EIA/IS-96-B Speech CODEC
TIA/EIA/IS-637
IS-801
Short message service
Position Determination
Service (gpsOne)
TSB-74: Protocol between an IS-95A system and
ANSI J-STD-008
*
Cellular base station
Cellular mobile station
PCS personal station
PCS base station
1xRTT system receives twice as many
subscribers in the wireless section as IS-95.
Its battery life is twice as long as IS-95.
TIA/EIA/IS-97
TIA/EIA/IS-98
ANSI J-STD-018
ANSI J-STD-019
TIA/EIA/IS-125
Performance
Speech CODEC
The following table lists some major CDMA
standards.
8 VX3400
FCC RF Exposure Information
Avoid the use of accessories that cannot maintain
0.6 inches (1.5 cm) distance between the user’s
body and the back of the phone and have not been
tested for compliance with FCC RF exposure limits.
WARNING! Read this information before operating the
phone.
In August 1996, the Federal Communications
Commission (FCC) of the United States, with its
action in Report and Order FCC 96-326, adopted an
updated safety standard for human exposure to
Radio Frequency (RF) electromagnetic energy
emitted by FCC regulated transmitters. Those
guidelines are consistent with the safety standard
previously set by both U.S. and international
standards bodies.
Vehicle-Mounted External Antenna (Optional, if available)
A minimum distance of 8 inches (20 cm) must be
maintained between the user / bystander and the
vehicle-mounted external antenna to satisfy FCC
RF exposure requirements. For more information
about RF exposure, visit the FCC website at
www.fcc.gov.
The design of this phone complies with the FCC
guidelines and these international standards.
Caution
Use only the supplied and approved antenna. Use
of unauthorized antennas or modifications could
impair call quality, damage the phone, void your
warranty and/or violate of FCC regulations.
Don't use the phone with a damaged antenna. If a
damaged antenna contacts skin, a minor burn may
result. Contact your local dealer for a replacement
antenna.
Bodily Contact During Operation
This device was tested for typical use with the back
of the phone kept 0.6 inches (1.5 cm) from the body.
To comply with FCC RF exposure requirements, a
minimum separation distance of 0.6 inches (1.5 cm)
must be maintained between the user’s body and
the back of the phone, including the antenna,
whether extended or retracted. Third-party belt-
clips, holsters, and similar accessories containing
metallic components should not be used.
VX3400 9
Phone Overview
1. Earpiece
2. Flip
Outside
Display
3. LCD Screen
4. Speakerphone Key
5. Headset Jack
10. Navigation Keys
11. Right Soft Key
6. Left Soft Key
12. Message Key
13. END/PWR Key
7. Side Keys
8. SEND Key
14. CLR Key
15. Alphanumeric Keypad
9. Manner Mode Key
16. Lock Mode Key
17. Microphone
10 VX3400
1. Earpiece
11. Right Soft Key Use to select an action within a
menu.
2. Flip Open to answer an incoming call and close
to end the call.
12. Message Key Use to retrieve or send voice and
text messages.
3. LCD Screen Displays messages and indicator
icons.
13. END/PWR Key Use to turn the power on/off and
to end a call. Also returns you to the main menu
display screen.
4. Speakerphone Key Use to set the Speaker
Phone Mode.
14. CLR Key Deletes single spaces or characters
with a quick press, but press and hold to delete
entire words. Will also back you out of menus,
one level at a time.
5. Headset Jack
6. Left Soft Key Use to display the function setting
menu.
7. Side Keys Use to adjust the ringer volume in
standby mode and the earpiece volume during a
call.
15. Alphanumeric Keypad Use to enter numbers and
characters and select menu items.
16. Lock Mode Key Use to lock the phone (from
8. SEND Key Use to make or answer calls.
standby mode press
seconds).
and hold for about 3
9. Manner Mode Key Use to set the Manner Mode
(from standby mode press and hold
about 3 seconds).
for
17. Microphone Allows you to speak to the caller.
10. Navigation Keys Use for quick access to
Messages, Speakerphone On/ Off, Schedule and
Sounds.
VX3400 11
Menus Overview
3. Emergency #s
4. Edit Codes
5. Erase Contacts
6. Reset Default
1. Contacts
3. Messages
1. Voice Mail
2. New Message
3. Inbox
4. Outbox
5. Saved
6. Msg Settings
1. Auto Save
2. Auto Delete
3. Callback #
4. Voice Mailbox #
5. Signature
6. Auto View
7. Entry Mode
8. Quick-Text
9. Auto Play
7. Erase All
1. Inbox
4. Media
6. Settings
1. Sounds
1. Ringers
2. Key Tone
1. List Contacts
2. New Number
3. New E-mail
4. Groups
5. Speed Dials
6. Voice Dials
7. My VCard
1. Small Pictures
2. Large Pictures
3. My Pictures
4. Sounds
5. My Melodies
6. Animations
5. Call Setup
3. Volume
1. Auto Retry
2. Answer Call
3. Auto Answer
4. One-Touch Dial
5. Voice Privacy
6. Auto Volume
7. TTY Mode
6. Standalone Mode
7. Voice Services
1. Voice Dial Prompt
2. Train Words
8. Location
4. Message Alerts
5. Service Alerts
6. Power On/Off Tone
7. DTMF Length
2. Display
1. Banner
2. Backlight
3. Screens
4. Menu Style
5. Clocks
6. Theme Colors
7. Contrast
7. My Animations
8. Melody Composer
8. In Case of Emergency
2. Recent Calls
5. Tools
1. Schedule
2. Alarm Clock
1. Alarm 1
2. Alarm 2
1. Dialed Calls
2. Received Calls
3. Missed Calls
4. Blocked Calls*
5. Erase Calls
1. Dialed Calls
2. Received Calls
3. Missed Calls
4. All Calls
6. Call Timer
1. Last Call
2. Home Calls
3. Roam Calls
4. All Calls
9. Phone Info
8. Fonts
3. Alarm 3
1. My Phone Number
2. S/W Version
3. Icon Glossary
4. Shortcut Help
9. Language
0. Power Saver
3. System
1. Select System
2. Set NAM
3. Auto NAM
4. Serving System
4. Security
4. Quick Alarm
3. Voice Memo
4. My Shortcut
5. Notepad
6. EZ Tip Calc
7. Calculator
8. World Clock
9. Unit Converter
2. Outbox
3. Saved
4. All
1. Lock Phone
2. Restrictions
Available only when all incoming
calls or incoming calls from your
Contacts are restricted in Menu->
Settings-> Security-> Restrictions->
Calls-> Incoming Calls.
*
Some contents in this user guide may differ from your phone depending on the phone software or
your service provider. Features and specifications are subject to change without prior notice.
12 VX3400
Getting Started with Your Phone
The Battery
Charging the Battery
To use the charger provided with your phone:
The phone comes with a rechargeable battery.
Keep it charged even while you’re not using it so
it’s ready when you need it.
NOTE It’s important to fully charge the battery before
using the phone for the first time.
1. Plug one end of the AC adapter into the phone’s
charger port and the other into an electrical
outlet.
2. Charge time varies depending upon the battery
level.
NOTE Battery life and signal strength are significant
factors (among others) that affect your phone’s ability to
send/receive calls.
NOTICE
Please use only an approved charging accessory to charge your
LG phone.
Installing the Battery
Improper handling of the charging port, as well as the use of an
incompatible charger, may cause damage to your phone and void
the warranty.
Insert the bottom of the battery into the opening on
the back of the phone, then push the battery down
until the latch clicks. Align the battery cover over
the battery then slide it slightly upward until it clicks
into place.
NOTICE
Triangle symbol
should face up.
Removing the Battery
Turn the phone off. Slide the battery cover
downward and remove it. Use the half-moon
opening near the top of the battery to lift the
battery out.
VX3400 13
Getting Started with Your Phone
Chargers which have two grooves on the
bottom are NOT compatible with this
Signal Strength
phone model. Inserting this type of charger
Call quality depends on the signal strength in your
into the phone may damage the charging
port. This charger is compatible with the
VX1000, VX3200, VX3300, VX4650,
VX4700, VX5200, VX6100, VX7000,
VX8000, VX8100 and VX9800.
area. You can tell how much signal strength you
have by the number of bars next to the signal
strength icon: the more bars, the stronger the
signal. If you’re having problems with signal quality,
move to an open area or, when inside a building,
try moving near a window.
The correct charger has only one groove on
the bottom. This charger will work with all of
the above listed phones, as well as the
VX3400, VX3450, VX5300 and VX8300.
Turning the Phone On and Off
Turning the Phone On
Battery Charge Level
1. Install a charged battery or connect the phone
to an external power source such as a cigarette
lighter charger or hands-free car kit.
You can find the battery charge level at the top right
of the LCD screen. When the charge level becomes
low, the battery sensor sounds a warning tone,
blinks the battery icon, and displays LOW BATTERY
WARNING!. As the charge level approaches empty,
the phone automatically switches off and anything
you’re doing is not saved.
2. Press
until the LCD screen lights up.
NOTE Like any other radio device, avoid contact with the
antenna while your phone is on.
Turning the Phone Off
1. Press and hold
until the display turns off.
Fully Charged
Empty
14 VX3400
Screen Icons
Making Calls
When the phone is on, the top line of the LCD
screen displays phone status icons. To see the
icon glossary, go to Menu -> Settings-> Phone Info
-> Icon Glossary on your phone.
1. Make sure the phone is turned on. If not, press
for about three seconds.
2. Enter the phone number (if necessary, enter the
lock code).
Signal strength indicator. The strength of the signal received by
the phone is indicated by the number of bars displayed.
3. Press
4. Press
.
Battery strength indicator. Indicates battery charge level.
In call state indicator. A call is in progress.
* No icon indicates the phone is in standby.
to end the call.
No service indicator. The phone is not receiving a system signal.
Correcting Dialing Mistakes
New text msgs
Press
once to erase the last digit entered, or
New text & voice
hold it down for at least two seconds to delete all
the digits.
Speaker On
Manner Mode
TTY
New voice mails
Silence all
Redialing Calls
Roaming
IS-2000
Digital
1. Press
twice to redial the last call.
Alarm
Analog
NOTE The first time you press
your phone lists a
Standalone Mode
Voice privacy
Location on
history of the last 90 phone calls. You can select any of
these to redial.
E911 only
VX3400 15
Quick Access to Convenient Features
Receiving Calls
Manner Mode
1. To answer a call, open the flip or press
.
Sets the phone to vibrate instead of ring ( is
displayed). To set Manner Mode press and hold
. To return to Normal Mode, press and hold
.
NOTE If you press Left Soft Key
[Quiet] while the
phone is ringing, the ringing or vibration is muted for that call.
NOTE If you press Right Soft Key
[Ignore] while the
phone is ringing, the call will end.
Lock Mode
2. Press
to end the call.
Sets your phone to require your 4-digit password in
order to use the phone.
NOTE Until you change it, the lock code/password is the
last 4 digits of your phone number.
To quickly lock your phone press
for three
seconds. To cancel, press Right Soft Key
[Unlock] and enter the password.
16 VX3400
Mute Function
Caller ID
The Mute Function prevents the transmittal of your
voice to the caller. To quickly activate Mute press
Caller ID displays the number and/or name of the
person calling when your phone rings. Check with
your service provider to ensure they offer this
feature.
Left Soft Key
Soft Key
[Mute], then to cancel press Left
[Unmute].
Speed Dialing
Volume Quick Adjustment
Speed Dialing allows you to make phone calls
quickly and easily with a few key presses. Speed
Dial number 1 is set to call your Voicemail.
Quickly adjust ringer and earpiece volumes by
pressing the upper side key to increase and lower
key to decrease.
NOTE The earpiece volume can only be adjusted during
a call and Key Beep volume can only be adjusted through
the Menu.
To dial Speed Dials
For Speed Dials 1 to 9 press and hold the Speed
Dial number.
For Speed Dials 10 to 99 press the first digit, then
press and hold the key of the last digit.
Call Waiting
During a call, one beep indicates another incoming
call. Check with your service provider for
NOTE Another way to Speed Dial is to enter the speed
dial number(s), then press
.
information about this function. Press
receive the waiting call then press
switch between calls.
to
again to
VX3400 17
Entering and Editing Information
Text Input Modes
In a text field, press Left Soft Key
text modes.
Text Input
The following key functions are available to help
with text entry:
to display
Key Functions
T9Word Mode
Type text pressing one key per letter. Combinations
are translated into common words using the letters
on each key and a compressed database.
Left Soft Key: Press to change text input
mode.
Shift: Press to change case (initial cap,
caps lock, lowercase).
1. Press Left Soft Key
mode.
to change to [T9Word]
Next: Press to display other matching
words in the database.
2. Press
.
Space: Press to complete a word and
3. Press
space.
to complete the word and add a
insert a space.
Clear: Press to delete a single space or
character. Hold to delete words.
4. Press
.
Punctuation: Press to insert punctuation.
Call the office is displayed.
18 VX3400
Using the NEXT Key
Symbols Mode
Insert special characters into your text. Choose
from 39 special characters including “SP” to insert
a space and “LF” to force text to the next line.
After entering a word, if the word displayed is not
the one you want, press
words from the database.
to display additional
1. Press
.
1. Press Left Soft Key
mode.
to change to Symbols
Good is displayed.
2. Press
.
2. Press Right Soft Key
symbols or Left Soft Key
previous 12.
[Next] to view next 12
Additional choices are displayed such as:
Home, Gone, Hood, etc.
[Prev] to view
Abc (Multi-tap) Mode
Type text pressing keys multiple times for words
not in the phone’s database.
3. Use
to highlight the special character you
want to insert and press
to select it.
1. Press Left Soft Key
to change to Abc mode.
4. Press Left Soft Key
text mode.
to change to another
2. Press
3. Press
to change to ABC Caps Lock.
.
LG is displayed.
Changing Letter Case
Set capitalization before typing. Press
choose Initial Cap (T9Word / Abc), Caps Lock
(T9WORD / ABC), and lowercase (T9word / abc).
to
123 (Numbers) Mode
Type numbers pressing each key only once.
1. Press Left Soft Key
to change to 123 mode.
2. Press
.
5551212 is displayed.
VX3400 19
Contacts in Your Phone’s Memory
Contacts Entries
Customizing Individual Entries
Store up to 300 entries with up to 5 phone numbers
each.
1. Press Right Soft Key
2. Use to select an entry, then press
3. Press Left Soft Key [Edit].
4. Use to select the information to customize.
[Contacts].
.
Storing Basics
1. Enter a number (max. 48 digits), then press Left
Soft Key
[Save].
5. Change the entry as you want, then press
to save your changes.
2. Use
to select a Label and press
.
Home / Home2 / Office / Office2 / Mobile /
Mobile2 / Pager / Fax / Fax2 / None
Email
Allows you to enter an email address to the
Contact entry.
3. Use
New Name / Existing
4. Enter a name (max. 22 characters), then press
to select where to save, then press
.
Group
Allows you to organize your Contacts into groups.
.
Call Ringtone
5. Press
[Done] to exit.
Sets the phone to play a specific ringtone when the
Contact calls your phone.
Message Alert
Sets the phone to play a specific ringtone when a
message arrives.
20 VX3400
NOTE If you've saved more than one number in the
Memo
Contact entry, you have to use
number first.
to highlight the phone
Allows you to enter a memo for the contact (e.g.,
birthday, address, etc.) up to 70 characters.
5. Use
to select Set Speed Dial, then press
.
Picture ID
Sets a picture to display to identify the caller when
they call your phone.
6. Enter a Speed Dial digit.
●
Use the keypad, then press
.
●
Use
to select the Speed Dial digit, then press
Speed Dial
.
Allows you to set up your Speed Dials.
Storing a Number with Pause
NOTE One-Touch Dial must be activated to use the
Speed Dials that you set up. Access Menu->
-> -> Enable.
->
Pauses allow you to enter additional series of
numbers to access automated systems such as
Voicemail or credit billing numbers. Pause types
are: Wait (W) The phone stops dialing until you
press Left Soft Key [Release] to send the next
string of digits. 2-sec Pause (P) The phone waits 2
seconds before sending the next string of digits.
1. Press Right Soft Key
[Contacts].
2. Use to select an entry, then press
.
3. Press Left Soft Key
4. Press Right Soft Key
[Edit].
[Options].
1. Enter the number, then press Right Soft Key
[Options].
VX3400 21
Contacts in Your Phone’s Memory
From the Contact List Screen
2. Use
press
to select Wait/ 2-sec Pause, then
1. Press Right Soft Key
2. Select an entry, then press
3. Press Left Soft Key [Edit].
4. Use to select [Add Number], then press
[Contacts].
.
.
3. Enter additional number(s) (e.g., pin number,
credit card number, etc.).
4. Press Left Soft Key
[Save] and continue
.
saving the Contact entry as needed.
5. Enter the phone number and press
continue saving the entry as needed.
, then
Adding Another Phone Number
From Standby Mode
Adding a Pause to a Contact Entry
1. Enter a phone number, then press Left Soft Key
1. Press Right Soft Key
[Contacts].
to select a Contact entry and press
, then press Left Soft Key [Edit].
to select the number and press
[Save].
2. Use
2. Use
Office2 / Mobile / Mobile2 / Pager / Fax / Fax2 /
None, then press
to select Home / Home2 / Office /
.
3. Use
,
3. Use
to select Existing, then press
.
then press Right Soft Key
[Pause].
4. Use
to select an existing entry, then press
4. Press
Wait or
2-sec Pause.
.
5. Enter additional number(s), then press
.
5. Press
to save.
6. Continue saving the Contact entry as needed.
22 VX3400
Changing Saved Information
To change any information you stored, access the
Edit Entry screen:
1. Press Right Soft Key
[Contacts].
2. Use
to highlight the Contact entry you want
to edit, then press
.
1. Press Right Soft Key
[Contacts].
to select an entry and press
[Edit].
to select the information you want to
3. Press Left Soft Key
[Edit].
2. Use
3. Use
, then
4. Use
to highlight the phone number you want
press Left Soft Key
to set as the Default Number and press Right Soft
Key
[Options].
Set as Default #.
change, then press
.
5. Press
4. Make the changes, then press
.
A confirmation message is displayed.
Changing the Default Number
Deleting
Deleting a Phone Number
The Default Number is the phone number you
entered when you created the Contact. Another
number can be saved as the Default Number.
1. Select an entry to edit.
2. Use
3. Press Right Soft Key
4. Select Erase Number.
A Confirmation message pops up.
5. Press to Erase.
to select a phone number.
NOTE The Set as Default option only appears if the
Contact has at least two phone numbers and you select
any phone number other than the first one.
[Options].
VX3400 23
Contacts in Your Phone’s Memory
NOTE If you try to delete the default number, an error
message will pop up.
Searching Your Phone’s Memory
You can search for information you stored in your
VX3400 phone. Scroll through your contents from A to
Z, or jump directly to a specific letter of the alphabet.
Deleting a Contact Entry
1. Select the entry from your Contacts.
Scrolling Through Your Contacts
2. Press Right Soft Key
[Options], then press
1. Press Right Soft Key
Contacts list is displayed alphabetically.
2. Use to scroll through the list.
[Contacts].
Erase.
3. A confirmation message is displayed. Press
to erase or
to cancel and keep the
Contact entry.
Searching by Letter
1. Press Right Soft Key
[Contacts].
Deleting a Speed Dial
Contacts list is displayed alphabetically.
1. Select the entry from your Contacts, then press
Left Soft Key [Edit].
2. Press Right Soft Key
2. Press (or press repeatedly) the key on the
keypad that corresponds with the search letter.
[Options].
Remove Speed Dial.
Remove.
3. Press
4. Press
24 VX3400
Calling From Your Phone’s Memory
Speed Dialing
Place calls quickly and easily to numbers stored in
your phone.
Allows you to make phone calls quickly and easily
to numbers stored in Contacts. You need to set
Speed Dials in your Contacts and enable One-
Touch Dial before using this feature.
From Contacts
1. Press Right Soft Key
[Contacts].
NOTE Speed Dial 1 is for Voicemail.
2. Use
to highlight the Contact entry.
to place the call.
Speed Dials From 1 to 9
3. Press
Press and hold the Speed Dial digit. Your phone
recalls the phone number from your Contacts,
displays it briefly, and then dials it.
NOTE When you press
If multiple numbers are saved in the entry, press
the Contact entry contents,highlight the one you want to call
and press
the Default Number is dialed.
to view
Speed Dials From 10 to 99
.
Press the first Speed Dial digit, then press and hold
the key of the last Speed Dial digit.
From Recent Calls
1. Press Left Soft Key
[Menu].
NOTE You can also enter the Speed Dial digit(s), then
2. Press
Recent Calls.
press
.
3. Use
press
to select the type of recent call and
.
Speed Dials 97, 98, and 99
Speed Dials 97, 98, and 99 are preset to access
certain phone account information: 97 (#BAL), 98
(#MIN), and 99 (#PMT). Unlike Speed Dial 1, these
can be changed if you want.
Dialed Calls / Received Calls / Missed Calls
4. Use to highlight the one you want to call,
then press to dial it.
VX3400 25
Contacts
Menu Access
Press Left Soft Key
six phone menus. There are two ways to access
menus and submenus:
Contacts
[Menu] to have access the
The Contacts Menu allows you to store names,
phone numbers and other information in your
phone’s memory. When you list your Contacts, the
number in parenthesis represents the number of
entries you have stored (up to 300).
●
Use the navigation key to highlight and select,
or
●
Press the number key that corresponds to the
Access and Options
menu or submenu.
1. Press Left Soft Key
[Menu].
For example:
1. Press Left Soft Key
2. Press
Contacts.
[Menu].
Six menus items are displayed.
3. Select a sub-menu.
Use
to scroll through the list of menus.
1. List Contacts
2. New Number
3. New E-mail
4. Groups
5. Speed Dials
6. Voice Dials
7. My VCard
2. Press the key of the menu item you want to
select.
The sub-menu list is displayed.
3. Press the key of the sub-menu you want to
access.
4. Use
select it.
to highlight a setting and press
to
8. In Case of Emergency
NOTE Press
to go back one step and cancel
without saving.
26 VX3400
Contacts
1. List Contacts
Allows you to view your Contacts list.
2. Enter the number and press
3. Select the Label you want and press
4. Enter the name and press
.
.
1. Press
,
,
.
.
2. Options from here:
5. Continue saving the entry as necessary.
●
Press
to scroll through your Contacts
alphabetically.
3. New E-mail
Allows you to save a new e-mail address as a new
Contact entry.
●
Press Right Soft Key
of the following:
[Options] to select one
Send Message / Find Name / Find Number /
Find Speed Dial / Find Group / Find E-mail /
Erase/ Set as Emergency
NOTE To save the e-mail into an existing Contact, edit the
Contact entry instead.
1. Press
2. Enter the e-mail address and press
3. Enter the name and press
4. Continue saving the entry as necessary.
,
,
.
●
Press Left Soft Key
Number or New E-mail.
[New] to store a New
.
.
2. New Number
Allows you to add a new number as a new Contact
entry.
NOTE To save the number into an existing Contact, edit
the Contact entry instead.
1. Press
,
,
.
VX3400 27
Contacts
4. Groups
1. Press
,
,
.
Allows you to view your grouped Contacts, add a
new group, change the name of a group, or delete
a whole group.
NOTE Press Right Soft Key
next available Speed Dial, remove a Speed Dial, or remove
all Speed Dials.
[Options] to skip to the
1. Press
,
,
.
2. Use
to highlight the Speed Dial position, or
2. Options from here:
enter the Speed Dial digit and press
.
●
Use
to highlight a group to view and press
3. Use
4. Use
to highlight the Contact and press
.
.
.
to highlight the number and press
●
●
Press Left Soft Key
group to the list.
[Add] to add a new
6. Voice Dials
Allows you to add, view, or delete Voice Dial
commands.
Use
to highlight a group and press Right
Soft Key
[Options] to change the name of
1. Press
,
,
.
the group or delete the group.
2. Options from here:
Edit Group / Erase Group
●
Press Left Soft Key
[New] to record a new
5. Speed Dials
Voice Dial command. Follow the phone’s prompts.
Allows you to view your list of Speed Dials or
designate Speed Dial for numbers entered in your
Contacts.
●
Use
to highlight a Voice Dial and press
[Options] to choose one of
Right Soft Key
28 VX3400
Contacts
the following:
Play / Re-record / Erase / Erase All
helpful in case of emergency. Also, it allows you to
read, add, edit, or erase the notes yourself as
necessary in case an emergency takes place.
NOTE Recordings should be made in a normal use
position (speaker by your ear and microphone near your
mouth) while using a clear voice. Hands-free car kits or
headsets should be used if the phone is primarily used with
them.
1. To program a new emergency number, press
,
,
.
2. Use
Soft Key
to highlight the Contact and press Left
[Add]. You may choose a contact
by pressing 1, or enter a number by pressing 2
From Contacts: Use to highlight a contact
and press . You will get a message
7. My VCard
Allows you to enter your own virtual business card
to be used in text messages.
"Emergecny Contact Assigned"
Enter Number: Enter number of emergency
1. Press
2. Use
,
,
.
contact, and press
Contact, and press
. Then enter name of
. New Emergency
to select the feature you want to edit
contact is now assigned.
and press
.
Emergency Contact Info
3. Edit the information as necessary.
1. To view Emergency Contact Information, press
Left Soft Key
with the
,
,
. Select Contact
8. In Case of Emergency
This menu allows you to store names, phone
and press
.
numbers and other information, which will be very
VX3400 29
Recent Calls
Recent Calls
Access and Options
The Recent Calls Menu is a list of the last phone
numbers or Contact entries for calls you made,
answered, or missed. It's continually updated with
new numbers added to the beginning of the list and
the oldest entries removed from the bottom of the
list.
1. Press Left Soft Key
[Menu].
2. Press Recent Calls.
3. Select a sub-menu.
1. Dialed Calls
2. Received Calls
3. Missed Calls
4. Blocked Calls*
5. Erase Calls
NOTE To view a quick list of all your recent calls, press
from standby mode.
●
indicates a dialed call.
6. Call Timer
●
indicates a received call.
●
indicates a missed call.
1. Dialed Calls
List of outgoing calls, up to 30.
1. Press
2. Use
,
,
.
to highlight an entry, then
●
Press
to view the entry.
to call the number.
●
Press
●
Press Right Soft Key
[Options] to select:
30 VX3400
Recent Calls
Save(Contact Info) / Send Msg / Prepend /
Erase / Erase All
●
●
Press
to call the number.
Press Right Soft Key
[Options] to select:
Save(Contact Info) / Send Msg / Prepend /
Erase / Erase All
2. Received Calls
List of incoming calls; up to 30.
1. Press
2. Use
,
,
.
4. Blocked Calls*
Displays the list of Blocked Calls; up to 30.
to highlight an entry, then
to view the entry.
●
Press
1. Press
,
,
.
2. Enter the four-digit of your lock code. The lock
code is commonly the last 4 digits of your
phone number.
●
Press
to call the number.
●
Press Right Soft Key
Save(Contact Info) / Send Msg / Prepend /
Erase / Erase All
[Options] to select:
3. Use
to highlight an entry, then
to view the entry.
●
Press
Press
●
●
to call the number.
3. Missed Calls
List of missed calls; up to 30.
Press Right Soft Key
[Options] to select:
Save(Contact Info)/ Send Msg/ Prepend/ Erase/
Erase All
1. Press
2. Use
,
,
.
to highlight an entry, then
to view the entry.
Available only when all incoming calls or incoming calls from your
Contacts are restricted in Menu-> Settings-> Security-> Restrictions->
Calls-> Incoming Calls. For info on how to block calls, see page 53.
*
●
Press
VX3400 31
Messages
5. Erase Calls
Allows you to erase selected call list(s).
Messages
Text messages, pages, and the voice mail box become
available as soon as you turn the phone on.
NOTE If Call Block is not activated, Erase Calls appears
as
, and Call Timer appears as
.
●
Check types of messages by pressing the
message key
.
1. Press
2. Use
,
,
.
●
●
Make a call to the callback number by pressing
during a message check.
to highlight the list of calls to erase
and press
.
Read and edit messages saved in the outbox
during transmission and send them.
Dialed Calls / Received Calls / Missed Calls /
All Calls
Access and Options
3. Press
Erase or
Cancel.
1. Press Left Soft Key
[Menu].
2. Press Messages.
6. Call Timer
Allows you to view the duration of selected calls.
3. Select a sub-menu.
1. Voice Mail
2. New Message
3. Inbox
1. Press
2. Use
,
,
.
to highlight a call list and press
.
Last Call / Home Calls / Roam Calls / All Calls
4. Outbox
5. Saved
6. Msg Settings
7. Erase All
32 VX3400
Messages
The phone can store up to 115 messages (for
example, 50 inbox text messages, 50 outbox text
messages, 15 saved text messages). The VX3400
supports up to 160 characters per message
including header information. The information stored
in the message is determined by phone mode and
service capability. Other limits to available
characters per message may exist. Please check
with your service provider for system features and
capabilities.
Checking Your Voice Mail Box
1. Press
,
,
.
2. Options from here:
●
Press
to listen to the message(s).
Press Left Soft Key [Clear] to delete
information, and then select Clear Count.
●
2. New Message
New Message Alert
Allows you to send text messages, EMS messages,
pages and e-mail transmissions. Each message
has a destination (Address 1) and information
(Message). These are dependent upon the type of
message you want to send.
Your phone alerts you when it receives a new
message. You'll see New Message displayed in the
middle of the screen and the message icon (
on the top line. You could also hear a message
alert, if you set one. Urgent message may be
displayed if the sender sent it as an urgent
message.
)
Text Message Basics
1. Press
2. Press
,
,
.
to enter the destination address.
3. Enter the phone number where you want to
send the message/page or the e-mail address
1. Voice Mail
Allows you to view new voice messages recorded
in the voice mail box. Your phone will alert you
when a new voice message is received.
for an e-mail message, then press
.
NOTE To send a page, press Left Soft Key
[Send].
VX3400 33
Messages
Using Contacts to send a Text Message
4. Press
to open the message screen.
You can designate an entry saved in your Contacts
as Address 1 instead of manually entering it.
5. Type your message (text or e-mail) then press
.
6. Press Left Soft Key [Send].
1. Press
2. Press Left Soft Key
3. Select Contacts / Recent Calls / Recent
Addresses then press
,
,
.
A confirmation message is displayed.
[Contacts].
Customizing the Text Message using options
1. Create a new message.
.
2. Press Right Soft Key
[Options].
4. Use
to highlight the Contact entry that has
3. Select the option(s) to customize.
the destination and press
.
Send
Sends the message.
5. Use
to highlight the SMS phone number or
Priority
Normal / High
e-mail address and press
.
Callback # Inserts a pre-programmed callback
number with your message.
On / Off / Edit
NOTE You can enter up to 10 addresses for each message.
6. Complete the message as necessary.
Delivery NoticeInforms you that the message has
been successfully delivered.
Enhanced / On
Save Message Saves the message to the phone's
Saved messages.
4. Complete and send the message.
34 VX3400
Messages
Text Options
Animations / My Animations
Allows you stylize your text message, insert Quick
Text, and include Objects in your messages for that
personalized touch.
Format Text Allows you to change the look of the
text.
Alignment / Font Size / Font Style /
Text Color / Background
1. Use
to highlight Message then press
.
Save Quick-Text Allows you to define phrases to
insert as Insert Quick Text.
2. Select text input mode by pressing Left Soft Key
.
Insert Signature Inserts a predefined signature.
T9Word / Abc / 123 / Symbols / Smiley
Custom / My VCard
3. Enter your message and use Right Soft Key
if necessary to add various effects to the text.
6. Complete and send or save the message.
4. Press Right Soft Key
[Options].
3. Inbox
5. Select the option(s) to customize.
The phone alerts you in 2 ways when you receive a
new message:
Insert Quick-Text Inserts predefined phrases.
What's up? / Let's meet. / Check this
●
By displaying a message notification.
out! / Whacha doing? / Thanks /
What do you think? / You've gotta
be here to enjoy this. / Would you
like to join me for a date tonight? /
On my way. / Yes / You're the best! /
Call me.
●
By sounding an alert (a beep or other sound
you set) or vibrating.
Received text messages, pages, and e-mails are
listed from newest to oldest. You can scroll through
them, then select any of them to view message
contents.
Insert Object Inserts objects into the message.
Small Pictures / Large Pictures / My
Pictures / Sounds / My Melodies /
VX3400 35
Messages
NOTE If you receive the same message twice, you'll only
see the most recent one and "Duplicate" appears at the top
of the message.
3. Press
to select the message.
[Options].
4. Press Right Soft Key
Reply w Copy Replies to the SMS with the original
message attached.
Out of Memory Warning
If the message NOT ENOUGH MEMORY! appears
on your display, you've filled up your allotted
message memory and your phone won't accept
any new messages. You'll have to delete some of
your old messages to free up some memory space.
Forward
Forwards a received message to
other destination address(es).
Erase
Deletes the selected message.
Save Address Stores the callback number, e-mail
address, and numbers in user data
included in the received message
into your Contacts.
Viewing Your Inbox
Your Inbox can store up to 50 received messages.
Save Object Saves animations and sounds to be
used as wallpaper or ring tone.
1. Press
2. Use
,
,
.
to highlight a message.
Save Quick-Text Saves the message into the Quick-
Text list.
●
Left Soft Key
Right Soft Key
[Reply].
Save Message Saves the message to the phone's
Saved messages.
●
[Options].
Erase
Deletes the selected message from
the Inbox.
Lock/Unlock Locks or unlocks the message to
prevent or allow deletion.
Lock/Unlock Locks or unlocks the message to
prevent or allow deletion.
36 VX3400
Messages
Save Quick-Text Saves the message into the Quick-
Text list.
4. Outbox
Your Outbox can store up to 50 sent messages. View
lists and contents of sent messages and verify
whether the transmission was successful or not.
Save Message Saves the message into the Saved
Folder.
1. Press
,
,
.
Lock/Unlock Locks or unlocks the message to
prevent or allow deletion.
2. Use
to highlight a message.
Message Info Shows the message type, priority
and status.
●
Press Left Soft Key
Press Right Soft Key
[Resend].
[Options].
●
Erase
Deletes the selected message.
5. Saved
Lock/Unlock Locks or unlocks the message to
prevent or allow deletion.
Displays saved messages and draft messages.
1. Press
,
,
.
3. Press
to select the message.
[Options].
2. Use
to highlight a message.
4. Press Right Soft Key
●
Press Left Soft Key
Press Right Soft Key
[Resume].
Send to
Erase
Allows you to send the message to
another address.
●
[Options].
Deletes the selected message.
Erase
Deletes the selected message.
Save Address Stores the callback number, e-mail
address, and numbers in user data
included in the received message
into your Contacts.
Lock/Unlock Locks or unlocks the message to
prevent or allow deletion.
VX3400 37
Messages
Message Settings Sub-Menu Descriptions
6.1 Auto Save
6. Msg Settings
Allows you to configure nine settings for received
messages.
Designates whether or not to save a copy of sent
messages when transmitted.
1. Press
2. Use
,
,
.
to highlight a setting and press
to
6.2 Auto Delete
select it.
Designates whether or not to automatically delete
read, unlocked messages when the phone's
memory becomes full.
Auto Save Auto Save / Prompt / Do Not Save
Auto Delete On / Off
Callback #
6.3 Callback #
Voice Mailbox #
Allows you to manually enter the callback number.
Signature
None / Custom / My VCard
6.4 Voice Mailbox #
Auto View On / Off
Allows you to manually enter the access number
for Voice Mail Service if the VMS access number
isn't provided from the network.
Entry Mode T9Word / Abc / 123
Quick-Text What's up? / Let's meet. / Check this
out! / Whacha doing? / Thanks /
What do you think? / You've gotta be
here to enjoy this. / Would you like to
join me for a date tonight? / On my
6.5 Signature
Allows you make/edit a signature to automatically
send with your messages.
way. / Yes / You're the best! / Call me.
Auto Play
On / Off
38 VX3400
Messages
6.6 Auto View
7. Erase All
Allows you to erase every unlocked message all at
once or individually erase Inbox, Outbox, and
Saved messages.
Sets the phone to automatically display the
contents of received messages instead of having
to open the message first.
6.7 Entry Mode
Allows you to select the default text input method.
1. Press
,
,
.
●
Press
Inbox to erase all Inbox messages.
6.8 Quick-Text
●
Press
Outbox to erase all Outbox messages.
Allows you to change the pre-programmed quick
text phrases and even add your own to make
sending messages quick and easy.
●
Press
Saved to erase all Saved messages.
●
Press
All to erase all messages stored in
the Inbox, Outbox, and Saved messages.
6.9 Auto Play
2. Press
Yes.
Sets the message to scroll automatically as you
read it.
Confirmation message is displayed.
VX3400 39
Media
1. Small Pictures
Media
Allows you to view all of the available small
pictures that you can insert into text messages.
The Media Menu allows you to download and use
a wide variety of graphics, sounds, and more.
1. Press
,
,
.
Access and Options
1. Press Left Soft Key
2. Press Media.
[Menu].
2. Large Pictures
Allows you to choose an image to display as the
background for certain phone features.
3. Select a sub-menu.
1. Small Pictures
2. Large Pictures
3. My Pictures
1. Press
2. Use
,
,
.
to highlight your selection then press
[Set As]
.
4. Sounds
Set As Contacts / Set As Wallpaper / Set As
5. My Melodies
6. Animations
Power On / Set As Power Off
7. My Animations
8. Melody Composer
40 VX3400
Media
3. My Pictures
Allows you to use your own pictures to display as
the background for certain phone features, as well
as manage your pictures.
5. My Melodies
Allows you to choose the ring tones heard.
1. Press
2. Use
,
,
.
to highlight your selection then press
[Set As]
1. Press
2. Use
,
,
.
.
to highlight your selection then press
[Set As]
Set As Contacts / Set As Caller ID / Set As No
Caller ID / Set As Restrict
.
Set As Contacts / Set As Wallpaper / Set As
Power On / Set As Power Off
3. Press Right Soft Key
[Options].
Erase / Rename / Erase All
3. Press Right Soft Key
[Options].
Erase / Rename / Erase All
6. Animations
Allows you to view the available animations that
you can use in email and text messages to
demonstrate feelings.
4. Sounds
Allows you to choose the ring tones heard.
1. Press
2. Use
,
,
.
1. Press
,
,
.
to highlight your selection then press
[Set As]
.
Set As Contacts / Set As Caller ID / Set As No
Caller ID / Set As Restrict
VX3400 41
Media
8.2 Melody Album
7. My Animations
Lists the melodies you created and saved in
Allows you to manage your own animations.
Compose Melody. Right Soft Key
[Options]
1. Press
,
,
.
allows you to manage your melodies.
2. Use
.
to highlight your selection then press
NOTE You can set melodies you created and saved in
the Melody Album as the ringtone for Contacts, Caller ID,
No Caller ID, or Restrict.
3. Press Right Soft Key
[Options].
Erase / Rename / Erase All
8.3 Metronome
Allows you to display an on-screen metronome
and set it to Slow, Fast, or Normal.
8. Melody Composer
1. Press
,
,
.
8.1 Compose Melody
Allows you to compose melodies in either
Keyboard Mode or Score Mode. Press Right
Soft Key
to control the following options:
Save / Play / To Score Mode(To Keyboard
Mode) / Melody Style / Instrument / Rhythm /
Tempo / Reset / Help
NOTE The Help option provides you with special key
functions you can use while you are composing melodies.
42 VX3400
Tools
1. Schedule
Tools
Allows you to conveniently keep and access your
agenda(s). Simply store your appointments and
your phone will alert you with a reminder of your
appointment.
Your phone tools include a Schedule, Alarm Clock,
Voice Memo, My Shortcut, Notepad, EZ Tip Calc,
Calculator, World Clock, and Unit Converter.
1. Press
2. Use
,
,
.
Access and Options
to highlight the scheduled day.
1. Press Left Soft Key
2. Press Tools.
[Menu].
Moves cursor to the left.
Moves cursor to the right.
Moves to the previous week.
Moves to the next week.
3. Select a sub-menu.
1. Schedule
2. Alarm Clock
3. Voice Memo
4. My Shortcut
5. Notepad
3. Press Left Soft Key
[Add].
4. Enter your schedule information including:
●
Date
Time
Title/Information
Recurring event
When to ring the alarm reminder
Which ring alarm to sound
●
6. EZ Tip Calc
7. Calculator
●
●
8. World Clock
9. Unit Converter
●
●
5. Press Left Soft Key
[Save].
VX3400 43
Tools
NOTE Scheduler will not alert you during a call or during
SMS transmitting. It will sound the reminder after you exit a
call.
3. Voice Memo
Allows you add, listen to, and erase short verbal
reminders.
1. Press
,
,
.
2. Alarm Clock
Allows you to set one of four alarms. The current
time is displayed at the top of the screen when you
select an alarm to set. At the alarm time, Alarm 1
(or 2 or 3, as applicable) will be displayed on the
LCD screen and the alarm will sound.
2. Press Left Soft Key
voice memo.
[New] to record a new
3. After the prompt, say your voice memo, then press
Left Soft Key [Done] to end the recording.
4. The Voice Memo title defaults to the date and
1. Press
,
,
.
time of recording.
2. Select the alarm you want to set.
●
Press
to view the selected Voice Memo
Alarm 1 /
Quick Alarm
Alarm 2 /
Alarm 3 /
information and be able to listen to the recording.
●
Press Right Soft Key
following:
[Options] for the
3. Enter Alarm information including:
●
On/Off
Time to sound alarm
When to sound alarm
Edit Title Edits the title of the Voice Memo.
Memory Info Shows the memory info used and
left.
●
●
●
Ringtone to sound for alarm
Set As
Contacts / Caller ID / No Caller ID /
Restrict
Deletes the selected Voice Memo.
4. Press Left Soft Key
[Save].
Erase
Erase All Deletes all of the Voice Memos.
44 VX3400
Tools
4. My Shortcut
7. Calculator
Allows you to set a shortcut to phone menus using
the Right Navigation key.
Allows you to perform simple mathematical
calculations. You can enter numbers up to the fifth
decimal place. Calculations can be made with up
to 3 lines at one time.
1. Press
,
,
.
An explanation message is displayed.
1. Press
,
,
.
2. Select the shortcut, then press
.
2. Enter the numbers for the value you want.
5. Notepad
Allows you to add, read, edit, and erase notes to
yourself.
●
Press Left Soft Key
entry.
[AC] to cancel the
●
Press Right Soft Key
parenthesis or power to your equation.
[Operator] to insert
1. Press
,
,
.
2. Press Left Soft Key
3. Use Right Soft Key
[Add] to write a new note.
to change the entry mode.
●
●
Press
Press
to insert a decimal.
to insert
.
4. After writing in the note, press
to save it.
3. Use the navigation key to enter +, -, x, /, = and
complete the equation.
6. EZ Tip Calc
Allows you to quickly and easily calculate bill
amounts using the bill total, tip, and number of
people as variables.
1. Press
,
,
.
VX3400 45
Settings
8. World Clock
Allows you to determine the current time in
another time zone or country by navigating with the
left or right navigation keys.
Settings
The Settings Menu has options to customize your
phone.
1. Press
,
,
.
Access and Options
1. Press Left Soft Key
[Menu].
NOTE Left Soft Key
Set DST, sets the time to
daylight saving time.
2. Press
Settings.
3. Select a sub-menu.
9. Unit Converter
Allows you to measure Length, Area, Weight,
Volume, Temperature and Speed.
1. Sounds
2. Display
3. System
1. Press
,
,
.
4. Security
5. Call Setup
6. Standalone Mode
7. Voice Services
8. Location
9. Phone Info
46 VX3400
Settings
1.3 Volume
Allows you to set various volume settings.
1. Press
1. Sounds
Options to customize the phone’s sounds.
,
,
,
.
1.1 Ringers
2. Select Ringer / Earpiece / Key Beep / Speaker
Allows you to assign ring tones for incoming calls.
Phone.
1. Press
2. Select Caller ID / No Caller ID / Restrict.
3. Use to select a ringer then press
save the sound.
,
,
,
.
3. Adjust the volume with
then press
to
save the setting.n
to
1.4 Message Alerts
Allows you to select the alert type for a new message.
1. Press
,
,
,
.
1.2 Key Tone
2. Select Voice Mail / Text Message / E-mail /
Allows you to select the Key Tone heard when you
press the keys.
Page / 2- Min Reminder.
1. Press
,
,
,
.
3. Choose the setting you want, then press
save the setting.
to
2. Select Beep / English / Spanish then press
.
Beep A beep sounds.
English Sends out a voice in English.
Spanish Sends out a voice in Spanish.
VX3400 47
Settings
1.5 Service Alerts
1. 5. 6. Charge Complete
Alerts you when charging is complete.
Allows you to set any of the seven Alert options to
either On or Off.
1. 5. 7. Accessory Input
Alerts you when an accessory is successfully
attached.
1. Press
,
,
,
.
2. Select an alert option and press
.
3. Set On / Off with
then press
.
1.6 Power On/Off Tone
Allows you to set the phone to sound a tone when
the phone is powered on and off.
1. 5. 1 Service Change
Alerts you when service changes. The phone
displays Entering Service Area or Leaving Service
Area message.
1. Press
,
,
,
.
2. Set On / Off with
then press .u\
1. 5. 2. ERI Sounds
Alerts you to the status of cellular service.
1.7 DTMF Length
ERI : Enhanced Roaming Indicator.
*
Allows you to set the Key Tone length and touch
tone playback speed.
1. 5. 3. Minute Beep
Alerts you 10 seconds before the end of every
minute during a call.
1. Press
,
,
,
.
2. Select either of the following then press
.
1. 5. 4. Call Connect
Alerts you when the call is connected.
Normal Sends out a tone for a fixed period of
time even if you keep the key pressed.
1. 5. 5. Back To Top
Alerts you when you scroll through the end of a
menu list.
Long Sends out a continuous tone for as long
as you keep the key pressed.
48 VX3400
Settings
NOTE Dual-Tone Multi Frequency (DTMF) Signaling by the
simultaneous transmission of two tones, one from a group of
low frequencies and another from a group of high frequencies.
Each group of frequencies consists of four frequencies. Setting
the Key Beep length to Long will extend the DTMF tone.
3. Choose a setting and press
Timer / Brightness
.
If an amount of time is set for the timer option, the
time starts after the last key was pressed.
NOTE This setting will affect your battery. Backlight uses
more energy and will drain your battery more quickly.
2. Display
Options to customize the phone’s display screen.
2. 2. 1. Main LCD
Timer Options
2.1 Banner
7 seconds
Allows you to enter a string of up to 16 characters
which display on the LCD screen.
15 seconds
30 seconds
Always On: Backlight is always on.
Always Off: Backlight is never on.
1. Press
,
,
,
.
2. Enter your banner text then press
.
Brightness Sets the brightness level of the backlight.
0% / 25% / 50% / 75% / 100%
2.2 Backlight
Allows you to set the phone's illumination. You can
set how long the screen (Main LCD) is lit as well as
how bright and set how long the keys (Key Light
Timer) are lit.
2. 2. 2. Key Light Timer
7 seconds
15 seconds
Always On: Backlight is always on.
Always Off: Backlight is never on.
1. Press
,
,
,
.
2. Choose a sub-menu.
Main LCD /
Key Light Timer
VX3400 49
Settings
2.3 Screens
2.6 Theme Colors
Allows you to set the background to be displayed
on the phone.
Allows you to choose the color of the background
screen.
1. Press
2. Select Default / Brilliant Blue / Gorgeous Green
/ Purple Pleasure then press
,
,
,
.
1. Press
2. Select Wallpaper / Power On / Power Off then
press
3. Select from different screens then press
,
,
,
.
.
.
.
2.7 Contrast
4. Press Left Soft Key
[Save] or
.
Allows you to set the level of contrast for your LCD
screen.
2.4 Menu Style
1. Press
,
,
,
.
Allows you to view the Menu as an Icon or List
display.
2. Select Main LCD / Front LCD, then press
.
3. Use
to adjust the level, then press
.
1. Press
,
,
,
.
2. Select Icon / List and press
.
2.8 Fonts
Allows you to set the size and color of the font.
1. Press
2.5 Clocks
,
,
,
.
Allows you to choose the kind of clock displayed
on the LCD screen.
2. 8. 1. Calling Digits
1. Select Size / Color, then press
2. Use to choose a setting, then press
1. Press
,
,
,
.
.
2. Select Normal / Analog / Digital then press Left
.
Soft Key
[Save].
50 VX3400
Settings
2. 8. 2. Text Editor
3. System
1. Select Size / Color, then press
.
The System Menu allows you to designate specific
system network settings.
2. Use
to choose a setting, then press
.
3.1 Select System
2. 8. 3. Menu Font
Allows you to set up the phone producer’s
management environment. Leave this setting as
the default unless you want to alter system
selection as instructed by your service provider.
1. Use
to select Normal / Large, then press
.
2.9 Language
Allows you to set the language your phone displays.
1. Press
,
,
,
.
1. Press
2. Use
,
,
,
.
2. Select Home Only / Automatic A / Automatic B
to select English / Spanish, then press
.
then press
.
2.0 Power Saver
3.2 Set NAM
When the phone is in an area without service, it
stops searching for service and enters Power
Saver Mode.
Allows you to select the phone’s NAM (Number
Assignment Module) if the phone is registered with
multiple service providers.
1. Press
,
,
,
.
1. Press
,
,
,
.
2. Use
to select a setting, then press
.
2. Select NAM1 / NAM2 then press
.
2 min / 10 min / 30 min / Off
VX3400 51
Settings
3.3 Auto NAM
4. Security
Allows the phone to automatically switch between
programmed telephone numbers corresponding to
the service provider area.
The Security Menu allows you to secure the phone
electronically.
4.1 Lock Phone
1. Press
,
,
,
.
Keeps your phone from unauthorized use. Once the
phone is locked, it's in restricted mode. You can
receive calls and make emergency calls, but the
lock code needs to be entered to do anything else.
You can change the lock code using New Lock
Code in the Security Menu.
2. Select On / Off then press
.
3.4 Serving System
Identifies the channel number of a system that is
served as an SID Number. This information should
only be used for technical support.
1. Press
,
,
.
2. Enter the four-digit lock code. The lock code is
commonly the last 4 digits of your phone number.
1. Press
,
,
,
.
3. Press
Lock Phone.
4. Select an option then press
.
Unlock
Lock
The phone is never locked (Lock mode
can be used).
The phone is always locked.
When locked, you can receive incoming
calls or make only emergency calls.
On Power Up The phone is locked when it's turned on.
52 VX3400
Settings
4.2 Restrictions
4.3 Emergency #s
Allows you to enter 3 emergency numbers. You can
call these emergency numbers and 911, even when
the phone is locked or restricted.
Allows you to restrict Location Setting, Calls,
Messages from your phone. In each category of
options (Location Setting, Calls, Messages) you
can set the level of restrictions.
1. Press
2. Enter the four-digit lock code.
3. Press Emergency #s.
4. Select emergency number then press
,
,
.
1. Press
,
,
.
2. Enter the four-digit lock code.
NOTE Change the restriction lock code to make it different
from the phone lock code.
.
5. Enter an emergency phone number then press
.
3. Press
Restrictions.
4. Enter the four-digit PIN code.
5. Select a Restrictions menu then press
- Location Setting
.
4.4 Edit Codes
Allows you to enter a new four-digit lock code.
- Calls (Incoming/ Outgoing)
- Messages (Incoming/ Outgoing)
1. Press
2. Enter the four-digit lock code.
3. Press Edit Codes.
,
,
.
6. Use
to set a level of restrictions then press
.
Location Setting Unlock Setting / Lock Setting
4. Enter 4 digits you want to use as your Lock Code.
5. Enter the same 4 digits to confirm your new lock code.
Calls
Allow All / Contacts Only /
Block All
Messages
Allow All / Block All
VX3400 53
Settings
4.5 Erase Contacts
Allows you to erase all of your Contacts at once.
1. Press
2. Enter the four-digit lock code.
3. Press Erase Contacts.
5. Call Setup
The Call Setup Menu allows you to designate how
the phone handles both incoming and outgoing
calls.
,
,
.
5.1 Auto Retry
4. Select Erase all #s then press
.
Allows you to set the length of time the phone
waits before automatically redialing a number after
an attempted call fails.
4.6 Reset Default
Allows you to reset your phone to the factory default
1. Press
,
,
,
.
settings.
2. Select Off / Every 10 seconds / Every 30
1. Press
2. Enter the four-digit lock code.
3. Press Reset Default.
,
,
.
seconds / Every 60 seconds then press
.
5.2 Answer Call
Allows you to set how to initiate an answered call.
1. Press
2. Select Flip open / Any key / SEND only then
press
4. Press , select Revert then press
.
,
,
,
.
.
54 VX3400
Settings
5.3 Auto Answer
5.5 Voice Privacy
Allows you to set the voice privacy feature for
CDMA calls. CDMA offers inherent voice privacy.
Check with your service provider for availability.
Allows you to set the phone to automatically
answer calls when connected to a hands-free
device.
1. Press
,
,
,
.
NOTE Auto Answer is an independent phone feature that
must be manually turned on/off when connected or
disconnected from a hands-free device.
2. Select Enhanced / Standard then press
.
1. Press
,
,
,
.
5.6 Auto Volume
2. Select an option then press
Off
After 5 sec When you have an incoming call, the
phone automatically responds after 5
.
Provides a better audio experience by enabling the
Auto Volume feature to control the dynamic range
and volume of the sending and receiving voice
across different levels of speaker and environments.
sec with the flip either opened or closed.
1. Press
,
,
,
.
2. Select On / Off then press
.
5.4 One-Touch Dial
Allows you to use the Speed Dial feature (by
pressing and holding the speed dial digit). If set to
Disable, Speed Dial numbers designated in your
Contacts will not function.
5.7 TTY Mode
Allows you to attach a TTY device enabling you to
communicate with parties also using a TTY device.
A phone with TTY support is able to translate typed
characters to voice. Voice can also be translated
into characters and then displayed on the TTY.
1. Press
,
,
,
.
2. Select Enable / Disable then press
.
VX3400 55
Settings
1. Press
,
,
,
.
When making
communications with a
normal terminal
Transmission/
Receiving Mode
An explanation message is displayed.
Menu User Feature
For
2. Press
to continue.
3. Select TTY Full / TTY + Talk / TTY + Hear / TTY
text message
transmission,
text message
receiving
Off then press
.
hearing-
/verbally-
TTY Full
operator required
operator required
operator required
TTY Full
Users who cannot talk and hear
send and receive a text message
through TTY equipment.
impaired
voice
For
TTY+Talk hearing- verbal
impaired
transmission,
text message
receiving
TTY + Talk Users who can talk but cannot hear
receive a text message and send
voice through TTY equipment.
TTY + Hear Users who can hear but cannot talk
send a text message and receive
For
text message
transmission,
voice receiving
audible
TTY+Hear verbally-
impaired
voice through TTY equipment.
TTY Off
Normal users send and receive
without TTY equipment.
For
voice
TTY+Off
regular
users
transmission,
voice receiving
56 VX3400
Settings
Connecting TTY Equipment and a Terminal
6. Standalone Mode
Allows you to use certain phone functions and
features (but no calls or web access) in areas
where radio transmission is restricted.
Activating Standalone Mode will disable all
wireless communications as noted in the
disclaimer on the phone. When in Standalone
Mode, services supporting Location
On functionality (such as Chaperone) will be
suspended.
1. Connect a TTY cable to TTY connection on the
terminal.
(TTY connection location the same as a hands
free earjack)
2. Enter the phone menu and set up the desired
TTY mode.
(For a TTY mode, see the chart at left)
3. After setting a TTY mode, check the LCD screen
of the phone for the TTY icon.
,
,
.
1. Press
4. Connect the TTY equipment to the power
source and turn it on.
5. Make a phone connection to the desired number.
6. When connection is made, use the TTY
equipment to type in and send a text message
or send voice.
2. Read the message, then press
to continue.
3. Select On / Off then press
.
7. Voice Services
Provides access to your phone's voice services.
7. The voice or text message from the receiver
end displays on the TTY equipment display.
7.1 Voice Dial Prompt
Allows you to set the prompt to initiate Voice Dialing.
,
,
,
1. Press
.
2. Select Key press / Flip open / Disable then press
.
VX3400 57
Settings
7.2 Train Words
Allows you to train the phone to recognize your
voice.
9. Phone Info
Provides you with specific information pertaining to
your phone model.
,
,
,
1. Press
.
9.1 My Phone Number
2. Select Yes / No then press
.
Allows you to view your phone number.
3. Select Train / Un-train then press
.
1. Press
,
,
,
.
8. Location
Allows you to set the GPS (Global Positioning
System: Satellite assisted location information
system) mode.
9.2 S/W Version
Allows you to view the S/W, PRL (Preferred
Roaming List), ERI.
1. Press
,
,
,
.
,
,
1. Press
.
2. Select Location On / E911 Only then press
.
9.3 Icon Glossary
Allows you to view phone icons and their meanings.
1. Press
NOTE GPS satellite signals are not always transmitted,
especially under bad atmospheric and environmental
conditions, indoors or otherwise.
,
,
,
.
NOTE When in Standalone Mode, services supporting
Location On functionality (such as Chaperone) will be
suspended.
9.4 Shortcut Help
Allows you to view condensed information about
using the phone.
1. Press
,
,
,
.
58 VX3400
Safety
Antenna Care
TIA Safety Information
Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications, or attachments could
damage the phone and may violate FCC regulations.
The following is the complete TIA Safety Information for
wireless handheld phones.
Exposure to Radio Frequency Signal
Phone Operation
Your wireless handheld portable phone is a low power radio
transmitter and receiver. When ON, it receives and sends out
Radio Frequency (RF) signals.
NORMAL POSITION: Hold the phone as you would any other
telephone with the antenna pointed up and over your shoulder.
In August, 1996, the Federal Communications Commissions
(FCC) adopted RF exposure guidelines with safety levels for
handheld wireless phones. Those guidelines are consistent with
the safety standards previously set by both U.S. and
international standards bodies:
Tips on Efficient Operation
For your phone to operate most efficiently:
Don't touch the antenna unnecessarily when the phone is in
use. Contact with the antenna affects call quality and may
cause the phone to operate at a higher power level than
otherwise needed.
ANSI C95.1 (1992) *
NCRP Report 86 (1986)
ICNIRP (1996)
Driving
American National Standards Institute; National Council on
Radiation Protection and Measurements; International
Commission on Non-Ionizing Radiation Protection
Those standards were based on comprehensive and periodic
evaluations of the relevant scientific literature. For example,
over 120 scientists, engineers, and physicians from universities,
government health agencies, and industry reviewed the
available body of research to develop the ANSI Standard
(C95.1). The design of your phone complies with the FCC
guidelines (and those standards).
Check the laws and regulations on the use of wireless phones
in the areas where you drive and always obey them. Also, if
using your phone while driving, please observe the following:
●
Give full attention to driving -- driving safely is your first
responsibility.
●
Use hands-free operation, if available.
●
Pull off the road and park before making or answering a call
if driving conditions or the law require it.
VX3400 59
Safety
Electronic Devices
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information.
Most modern electronic equipment is shielded from RF signals.
However, certain electronic equipment may not be shielded
against the RF signals from your wireless phone.
Pacemakers
Health Care Facilities
The Health Industry Manufacturers Association recommends
that a minimum separation of fifteen (15) centimeters or six (6)
inches be maintained between a handheld wireless phone and
a pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent with the
independent research by and recommendations of Wireless
Technology Research.
Turn your phone OFF in health care facilities when any
regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may use equipment that could
be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Persons with pacemakers:
●
Should ALWAYS keep the phone more than six (6) inches
from their pacemaker when the phone is turned ON.
●
Should not carry the phone in a breast pocket.
●
Should use the ear opposite the pacemaker to
minimize the potential for interference.
Posted Facilities
●
Should turn the phone OFF immediately if there is any
reason to suspect that interference is taking place.
Turn your phone OFF in any facility where posted notices so
require.
Hearing Aids
Aircraft
Some digital wireless phones may interfere with some hearing
aids. In the event of such interference, you may want to consult
your service provider (or call the customer service line to
discuss alternatives).
FCC regulations prohibit using your phone while in the air.
Switch OFF your phone before boarding an aircraft.
60 VX3400
Blasting Areas
Safety Information
Please read and observe the following information for safe and
proper use of your phone and to prevent damage. Also, keep the
user guide in an accessible place at all the times after reading it.
To avoid interfering with blasting operations, turn your phone
OFF when in a “blasting area” or in areas posted: “Turn off two-
way radio”. Obey all signs and instructions.
Potentially Explosive Atmosphere
Violation of the instructions may cause
minor or serious damage to the product.
Turn your phone OFF when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death.
Charger and Adapter Safety
●
The charger and adapter are intended for indoor use only.
Areas with a potentially explosive atmosphere are often, but not
always, marked clearly. Potential areas may include: fueling
areas (such as gasoline stations); below deck on boats; fuel or
chemical transfer or storage facilities; vehicles using liquefied
petroleum gas (such as propane or butane); areas where the air
contains chemicals or particles (such as grain, dust, or metal
powders); and any other area where you would normally be
advised to turn off your vehicle engine.
●
Insert the battery pack charger vertically into the wall power
socket.
●
Only use the approved battery charger. Otherwise, you may
cause serious damage to your phone.
●
Use the correct adaptor for your phone when using the
battery pack charger outside the U.S.
Battery Information and Care
For Vehicles Equipped with an Air Bag
●
Please dispose of your battery properly or take it to your
local wireless carrier for recycling.
The battery doesn't need to be empty before recharging.
Use only LG-approved chargers specific to your phone
model since they are designed to maximize battery life.
An air bag inflates with great force. DO NOT place objects,
including either installed or portable wireless equipment, in the
area over the air bag or in the air bag deployment area. If in-
vehicle wireless equipment is improperly installed and the air
bag inflates, serious injury could result.
●
●
●
Do not disassemble or short-circuit the battery.
●
Keep the battery’s metal contacts clean.
VX3400 61
Safety
●
●
Replace the battery when it no longer provides acceptable
performance. The battery can be recharged several hundred
times before replacement.
Recharge the battery after long periods of non-use to
maximize battery life.
Battery life will vary due to usage patterns and environmental
conditions.
Use of extended backlighting, and data connectivity kits
affect battery life and talk/standby times.
The self-protection function of the battery cuts the power of
the phone when its operation is in an abnormal state. In this
case, remove the battery from the phone, reinstall it, and turn
the phone on.
Do not short-circuit the battery. Metallic articles such as a
coin, paperclip or pen in your pocket or bag may short-
circuit the + and – terminals of the battery (metal strips on
the battery) upon moving. Short-circuit of the terminal may
damage the battery and cause an explosion.
●
●
●
●
General Notice
●
Using a damaged battery or placing a battery in your mouth
may cause serious injury.
Do not place items containing magnetic components such as
a credit card, phone card, bank book or subway ticket near
your phone. The magnetism of the phone may damage the
data stored in the magnetic strip.
●
●
Talking on your phone for a long period of time may reduce
call quality due to heat generated during use.
When the phone is not used for a long period time, store it in
a safe place with the power cord unplugged.
Using the phone in proximity to receiving equipment (i.e., TV
or radio) may cause interference to the phone.
Do not use the phone if the antenna is damaged. If a
Explosion, Shock, and Fire Hazards
●
●
Do not put your phone in a place subject to excessive dust
and keep the minimum required distance between the power
cord and heat sources.
●
●
Unplug the power cord prior to cleaning your phone, and
●
clean the power plug pin when it is dirty.
damaged antenna contacts skin, it may cause a slight burn.
Please contact an LG Authorized Service Center to replace
the damaged antenna.
Do not immerse your phone in water. If this happens, turn it
off immediately and remove the battery. If the phone does
not work, take it to an LG Authorized Service Center.
●
When using the power plug, ensure that it is firmly
connected. If it is not, it may cause excessive heat or fire.
If you put your phone in a pocket or bag without covering the
receptacle of the phone (power plug pin), metallic articles
(such as a coin, paperclip or pen) may short-circuit the
phone. Always cover the receptacle when not in use.
●
●
62 VX3400
●
●
Do not paint your phone.
FDA Consumer Update
The data saved in your phone might be deleted due to
careless use, repair of the phone, or upgrade of the software.
Please backup your important phone numbers. The
The U.S. Food and Drug Administration’s Center for
Devices and Radiological Health Consumer Update
on Mobile Phones:
manufacturer is not liable for damage due to the loss of data.
●
When you use the phone in public places, set the ring tone
to vibration so as not to disturb others.
1. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is
no proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of Radio Frequency energy (RF)
in the microwave range while being used. They also emit very
low levels of RF when in the Main Menu Screen. Whereas high
levels of RF can produce health effects (by heating tissue),
exposure to low level RF that does not produce heating effects
causes no known adverse health effects. Many studies of low
level RF exposures have not found any biological effects. Some
studies have suggested that some biological effects may occur,
but such findings have not been confirmed by additional
research. In some cases, other researchers have had difficulty
in reproducing those studies, or in determining the reasons for
inconsistent results.
●
●
Do not turn your phone on or off when putting it in your ear.
Use accessories, such as earphones and headsets, with
caution. Ensure that cables are tucked away safely and do
not touch the antenna unnecessarily.
If you are listening to music whilst out and about, please ensure
that the volume is at a reasonable level so that you are aware
of your surroundings. This is particularly imperative when
attempting to cross the street.
Avoid damage to your hearing
Damage to your hearing can occur if you are exposed to loud
sound for long periods of time. We therefore recommend that
you do not turn on or off the handset close to your ear. We also
recommend that music and call volumes are set to a reasonable
level.
2. What is the FDA's role concerning the safety of wireless
phones?
Under the law, the FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before
they can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit Radio Frequency energy (RF) at a
VX3400 63
Safety
level that is hazardous to the user. In such a case, the FDA
could require the manufacturers of wireless phones to notify
users of the health hazard and to repair, replace, or recall the
phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, the FDA has urged the wireless phone
industry to take a number of steps, including the following:
that are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. The FCC relies on the FDA and
other health agencies for safety questions about wireless phones.
The FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations operate at
higher power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
●
Support needed research into possible biological effects of
RF of the type emitted by wireless phones.
Base stations are thus not the subject of the safety questions
discussed in this document.
●
Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device
function.
Cooperate in providing users of wireless phones with the
3. What kinds of phones are the subject of this update?
●
The term “wireless phone” refers here to handheld wireless
phones with built-in antennas, often called “cell”, “mobile”, or
“PCS” phones. These types of wireless phones can expose the
user to measurable Radio Frequency energy (RF) because of the
short distance between the phone and the user’s head.
These RF exposures are limited by FCC safety guidelines that
were developed with the advice of the FDA and other federal
health and safety agencies. When the phone is located at
greater distances from the user, the exposure to RF is drastically
lower because a person's RF exposure decreases rapidly with
increasing distance from the source. The so-called “cordless
phones”, which have a base unit connected to the telephone
wiring in a house, typically operate at far lower power levels,
and thus produce RF exposures far below the FCC safety limits.
best possible information on possible effects of wireless
phone use on human health.
The FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
●
National Institute for Occupational Safety and Health
●
Environmental Protection Agency
●
Occupational Safety and Health Administration
●
National Telecommunications and Information
Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
The FDA shares regulatory responsibilities for wireless phones
with the Federal Communications Commission (FCC). All phones
64 VX3400
4. What are the results of the research done already?
5. What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
The research done thus far has produced conflicting results,
and many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of Radio
Frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of
the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
cancer-causing chemicals so as to be pre-disposed to develop
cancer in the absence of RF exposure. Other studies exposed
the animals to RF for up to 22 hours per day. These conditions
are not similar to the conditions under which people use
wireless phones, so we don’t know with certainty what the
results of such studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland, leukemia, or
other cancers. None of the studies demonstrated the existence
of any harmful health effects from wireless phone RF
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies
could be completed in a few years. However, very large
numbers of animals would be needed to provide reliable proof
of a cancer promoting effect if one exists. Epidemiological
studies can provide data that is directly applicable to human
populations, but 10 or more years follow-up may be needed to
provide answers about some health effects, such as cancer.
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop — if they do
— may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in measuring
actual RF exposure during day-to-day use of wireless phones.
Many factors affect this measurement, such as the angle at
which the phone is held, or which model of phone is used.
6. What is the FDA doing to find out more about the possible
health effects of wireless phone RF?
The FDA is working with the U.S. National Toxicology Program
and with groups of investigators around the world to ensure
that high priority animal studies are conducted to address
important questions about the effects of exposure to Radio
Frequency energy (RF).
The FDA has been a leading participant in the World Health
Organization International Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
exposures. However, none of the studies can answer questions
about long-term exposures, since the average period of phone
use in these studies was around three years.
VX3400 65
Safety
that has driven the establishment of new research programs
around the world. The project has also helped develop a series
of public information documents on EMF issues. The FDA and
the Cellular Telecommunications & Internet Association (CTIA)
have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
The FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
CTIA-funded research is conducted through contracts with
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
wireless phones must report the RF exposure level for each
model of phone to the FCC.
The FCC website (http://www.fcc. gov/oet/rfsafety) gives
directions for locating the FCC identification number on your
phone so you can find your phone’s RF exposure level in the
online listing.
8. What has the FDA done to measure the radio frequency
energy coming from wireless phones?
The Institute of Electrical and Electronic Engineers (IEEE) is
developing a technical standard for measuring the Radio
Frequency energy (RF) exposure from wireless phones and other
wireless handsets with the participation and leadership of FDA
scientists and engineers. The standard, “Recommended
Practice for Determining the Spatial-Peak Specific Absorption
Rate (SAR) in the Human Body Due to Wireless Communications
Devices: Experimental Techniques”, sets forth the first
developments around the world.
7. How can I find out how much radio frequency energy
exposure I can get by using my wireless phone?
All phones sold in the United States must comply with Federal
Communications Commission (FCC) guidelines that limit Radio
Frequency energy (RF) exposures. The FCC established these
guidelines in consultation with the FDA and the other federal
health and safety agencies. The FCC limit for RF exposure from
wireless telephones is set at a Specific Absorption Rate (SAR) of
1.6 watts per kilogram (1.6 W/kg). The FCC limit is consistent with
the safety standards developed by the Institute of Electrical and
Electronic Engineering (IEEE) and the National Council on
Radiation Protection and Measurement. The exposure limit takes
into consideration the body’s ability to remove heat from the
tissues that absorb energy from the wireless phone and is set
well below levels known to have effects. Manufacturers of
consistent test methodology for measuring the rate at which RF
is deposited in the heads of wireless phone users. The test
method uses a tissue-simulating model of the human head.
Standardized SAR test methodology is expected to greatly
improve the consistency of measurements made at different
laboratories on the same phone. SAR is the measurement of the
amount of energy absorbed in tissue, either by the whole body or
a small part of the body. It is measured in watts/kg (or
milliwatts/g) of matter. This measurement is used to determine
whether a wireless phone complies with safety guidelines.
66 VX3400
9. What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
such a recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain tumors
or other ill effects. Their recommendation to limit wireless phone
use by children was strictly precautionary; it was not based on
scientific evidence that any health hazard exists.
If there is a risk from these products — and at this point we do not
know that there is — it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a few
simple steps to minimize your exposure to Radio Frequency energy
(RF). Since time is a key factor in how much exposure a person
receives, reducing the amount of time spent using a wireless phone
will reduce RF exposure. If you must conduct extended
conversations by wireless phone every day, you could place more
distance between your body and the source of the RF, since the
exposure level drops off dramatically with distance. For example,
you could use a headset and carry the wireless phone away from
your body or use a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones
are harmful. But if you are concerned about the RF exposure from
these products, you can use measures like those described above
to reduce your RF exposure from wireless phone use.
11. What about wireless phone interference with medical
equipment?
Radio Frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, the FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Advancement of Medical Instrumentation (AAMI). The final draft,
a joint effort by the FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This standard
will allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI.
10. What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want
to take steps to lower exposure to Radio Frequency energy (RF),
the measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and
the RF source will reduce RF exposure. Some groups sponsored
by other national governments have advised that children be
discouraged from using wireless phones at all. For example, the
government in the United Kingdom distributed leaflets containing
The FDA has tested hearing aids for interference from handheld
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a “compatible” phone
and a “compatible” hearing aid at the same time. This standard
was approved by the IEEE in 2000.
VX3400 67
Safety
The FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should harmful
interference be found to occur, the FDA will conduct testing to
assess the interference and work to resolve the problem.
10 Driver Safety Tips
Your wireless phone gives you the powerful ability to
communicate by voice almost anywhere, anytime. An important
responsibility accompanies the benefits of wireless phones, one
that every user must uphold.
12. Where can I find additional information?
When operating a car, driving is your first responsibility. When
using your wireless phone behind the wheel of a car, practice
good common sense and remember the following tips:
For additional information, please refer to the following resources:
FDA web page on wireless phones
(http://www.fda.gov/cdrh/phones/index.html)
1. Get to know your wireless phone and its features such as
speed dial and redial. Carefully read your instruction manual
and learn to take advantage of valuable features most
phones offer, including automatic redial and memory. Also,
work to memorize the phone keypad so you can use the
speed dial function without taking your attention off the road.
Federal Communications Commission (FCC) RF Safety Program
(http://www.fcc.gov/oet/rfsafety)
International Commission on Non-lonizing Radiation Protection
(http://www.icnirp.de)
World Health Organization (WHO) International EMF Project
(http://www.who.int/emf)
2. When available, use a hands-free device. A number of
hands-free wireless phone accessories are readily available
today. Whether you choose an installed mounted device for
your wireless phone or a speaker phone accessory, take
advantage of these devices if available to you.
National Radiological Protection Board (UK)
(http://www.nrpb.org.uk/)
3. Make sure you place your wireless phone within easy reach
and where you can reach it without removing your eyes
from the road. If you get an incoming call at an inconvenient
time, if possible, let your voicemail answer it for you.
68 VX3400
4. Suspend conversations during hazardous driving conditions
or situations. Let the person you are speaking with know you
are driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow and ice
can be hazardous, but so is heavy traffic. As a driver, your
first responsibility is to pay attention to the road.
8. Use your wireless phone to call for help. Your wireless
phone is one of the greatest tools you can own to protect
yourself and your family in dangerous situations -- with your
phone at your side, help is only three numbers away. Dial
911 or other local emergency number in the case of fire,
traffic accident, road hazard or medical emergency.
Remember, it's a free call on your wireless phone!
9. Use your wireless phone to help others in emergencies.
Your wireless phone provides you a perfect opportunity to
be a “Good Samaritan” in your community. If you see an
auto accident, crime in progress or other serious
5. Don't take notes or look up phone numbers while driving. If
you are reading an address book or business card, or writing
a “to-do” list while driving a car, you are not watching where
you are going. It's common sense. Don’t get caught in a
dangerous situation because you are reading or writing and
not paying attention to the road or nearby vehicles.
emergency where lives are in danger, call 911 or other local
emergency number, as you would want others to do for you.
6. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try to
plan your calls before you begin your trip or attempt to
coincide your calls with times you may be stopped at a stop
sign, red light or otherwise stationary. But if you need to dial
while driving, follow this simple tip -- dial only a few
10. Call roadside assistance or a special wireless non-
emergency assistance number when necessary. Certain
situations you encounter while driving may require attention,
but are not urgent enough to merit a call for emergency
services. But you can still use your wireless phone to lend a
hand. If you see a broken-down vehicle posing no serious
hazard, a broken traffic signal, a minor traffic accident
where no one appears injured or a vehicle you know to be
stolen, call roadside assistance or other special non-
emergency wireless number.
numbers, check the road and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that
may be distracting. Stressful or emotional conversations and
driving do not mix; they are distracting and even dangerous
when you are behind the wheel of a car. Make people you
are talking with aware you are driving and if necessary,
suspend conversations which have the potential to divert
your attention from the road.
For more information, please call to 888-901-SAFE, or visit our
website www.ctia.org.
VX3400 69
Safety
Before a phone model is available for sale to the public, it must be
tested and certified to the FCC that it does not exceed the limit
established by the government-adopted requirement for safe
exposure. The tests are performed in positions and locations (e.g.,
at the ear and worn on the body) as required by the FCC for each
model.
Consumer Information on SAR
(Specific Absorption Rate)
This Model Phone Meets the Government’s Requirements for
Exposure to Radio Waves. Your wireless phone is a radio
transmitter and receiver. It is designed and manufactured not to
exceed the emission limits for exposure to Radio Frequency (RF)
energy set by the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive guidelines and
establish permitted levels of RF energy for the general population.
The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons,
regardless of age and health.
The highest SAR value for this model phone when tested for use at
the ear is 0.937 W/kg and when worn on the body, as described in
this user guide, is 0.562 W/kg (body-worn measurements differ
among phone models, depending upon available accessories and
FCC requirements). While there may be differences between SAR
levels of various phones and at various positions, they all meet the
government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance with
the FCC RF emission guidelines. SAR information on this model
phone is on file with the FCC and can be found under the Display
Grant section of http://www.fcc.gov/oet/fccid after searching on
FCC ID BEJVX3400. Additional information on Specific Absorption
Rates (SAR) can be found on the Cellular Telecommunications
Industry Association (CTIA) website at http://www.ctia.org.
The exposure standard for wireless mobile phones employs a unit
of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are
conducted using standard operating positions specified by the FCC
with the phone transmitting at its highest certified power level in all
tested frequency bands. Although SAR is determined at the highest
certified power level, the actual SAR level of the phone while
operating can be well below the maximum value. Because the
phone is designed to operate at multiple power levels to use only
the power required to reach the network, in general, the closer you
are to a wireless base station antenna, the lower the power output.
*
In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public and
to account for any variations in measurements.
70 VX3400
The ratings are not guarantees. Results will vary depending
on the user’s hearing device and hearing loss. If your
hearing device happens to be vulnerable to interference,
you may not be able to use a rated phone successfully.
Trying out the phone with your hearing device is the best
way to evaluate it for your personal needs.
FCC Hearing-Aid Compatibility
(HAC) Regulations for Wireless
Devices
On July 10, 2003, the U.S. Federal Communications
Commission (FCC) Report and Order in WT Docket 01-309
modified the exception of wireless phones under the
Hearing Aid Compatibility Act of 1988 (HAC Act) to require
digital wireless phones be compatible with hearing-aids.
The intent of the HAC Act is to ensure reasonable access
to telecommunications services for persons with hearing
disabilities.
M-Ratings: Phones rated M3 or M4 meet FCC requirements
and are likely to generate less interference to hearing
devices than phones that are not labeled. M4 is the
better/higher of the two ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements
and are likely to generate less interference to hearing
devices than phones that are not labeled. T4 is the
better/higher of the two ratings.
While some wireless phones are used near some hearing
devices (hearing aids and cochlear implants), users may
detect a buzzing, humming, or whining noise. Some hearing
devices are more immune than others to this interference
noise, and phones also vary in the amount of interference
they generate.
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you
find this rating. Higher ratings mean that the hearing
device is relatively immune to interference noise. The
hearing aid and wireless phone rating values are then
added together. A sum of 5 is considered acceptable for
normal use. A sum of 6 is considered for best use.
The wireless telephone industry has developed a rating
system for wireless phones, to assist hearing device users
find phones that may be compatible with their hearing
devices. Not all phones have been rated. Phones that are
rated have the rating on their box or a label located on the
box.
VX3400 71
Safety
For information about hearing aids and digital
wireless phones
FCC Hearing Aid Compatibility and Volume Control
http://www.fcc.gov/cgb/dro/hearing.html
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This
should provide the hearing aid user with “normal usage” while
using their hearing aid with the particular wireless phone.
“Normal usage” in this context is defined as a signal quality that is
acceptable for normal operation.
Gallaudet University, RERC
http://tap.Gallaudet.edu/DigWireless.KS/DigWireless
.htm
Hearing Loss Association of America [HLAA]
http://www.hearingloss.org/learn/cellphonetech.asp
The Hearing Aid Compatibility FCC Order
The M mark is intended to be synonymous with the U mark. The T
mark is intended to be synonymous with the UT mark. The M and
T marks are recommended by the Alliance for
http://hraunfoss.fcc.gov/edocs_public/attachmatch/
FCC-03-168A1.pdf
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules. The HAC
rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
72 VX3400
Accessories
There are a variety of accessories available for your mobile phone. Consult your local dealer for availability.
Battery
Hands-free Headset
The hands-free headset connects to
your phone allowing hands-free
operation. It includes earpiece and
microphone.
Two batteries are available.
The standard battery, and the
extended battery.
Battery Charger
The battery charger allows you to
charge the battery.
USB Cable
Connects your phone to your PC.
Vehicle Power Adapter
(Portable)
Battery Pack Charger
The battery pack charger allows you
to charge the battery pack itself
without the phone.
The vehicle power adapter allows
you to operate the phone and trickle
charge the phone’s battery from your
vehicle.
Holster
Hands-Free Car Kit (Portable)
The hands-free car kit enables you to
attach the phone to the power jack in
your car, providing you with hands-
free operation.
VX3400 73
LIMITED WARRANTY STATEMENT
1. WHAT THIS WARRANTY COVERS:
2. WHAT THIS WARRANTY DOES NOT COVER :
LG offers you a limited warranty that the enclosed subscriber
unit and its enclosed accessories will be free from defects in
material and workmanship, according to the following terms and
conditions:
(1) The limited warranty for the product extends for TWELVE
(12) MONTHS beginning on the date of purchase of the
product with valid proof of purchase, or absent valid proof
of purchase, FIFTEEN (15) MONTHS from date of
manufacture as determined by the unit's manufacture
date code.
(2) The limited warranty extends only to the original
purchaser of the product and is not assignable or
transferable to any subsequent purchaser/end user.
(3) This warranty is good only to the original purchaser of the
product during the warranty period as long as it is in the
U.S., including Alaska, Hawaii, U.S. Territories and Canada.
(1) Defects or damages resulting from use of the product in
other than its normal and customary manner.
(2) Defects or damages from abnormal use, abnormal
conditions, improper storage, exposure to moisture or
dampness, unauthorized modifications, unauthorized
connections, unauthorized repair, misuse, neglect, abuse,
accident, alteration, improper installation, or other acts
which are not the fault of LG, including damage caused by
shipping, blown fuses, spills of food or liquid.
(3) Breakage or damage to antennas unless caused directly
by defects in material or workmanship.
(4) That the Customer Service Department at LG was not
notified by consumer of the alleged defect or malfunction
of the product during the applicable limited warranty
period.
(5) Products which have had the serial number removed or
made illegible.
(4) The external housing and cosmetic parts shall be free of
defects at the time of shipment and, therefore, shall not be
covered under these limited warranty terms.
(5) Upon request from LG, the consumer must provide
information to reasonably prove the date of purchase.
(6) The customer shall bear the cost of shipping the product
to the Customer Service Department of LG. LG shall bear
the cost of shipping the product back to the consumer
after the completion of service under this limited warranty.
(6) This limited warranty is in lieu of all other warranties,
express or implied either in fact or by operations of law,
statutory or otherwise, including, but not limited to any
implied warranty of marketability or fitness for a particular
use.
(7) Damage resulting from use of non LG approved accessories.
(8) All plastic surfaces and all other externally exposed
parts that are scratched or damaged due to normal
customer use.
74 VX3400
(9) Products operated outside published maximum ratings.
(10) Products used or obtained in a rental program.
(11) Consumables (such as fuses).
4. HOW TO GET WARRANTY SERVICE:
To obtain warranty service, please call or fax to the following
telephone numbers from anywhere in the continental United
States:
3. STATE LAW RIGHTS:
Tel. 1-800-793-8896 or Fax. 1-800-448-4026
No other express warranty is applicable to this product. THE
DURATION OF ANY IMPLIED WARRANTIES, INCLUDING
THE IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED
TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
LGE MOBILECOMM, USA, INC. SHALL NOT BE LIABLE FOR
THE LOSS OF THE USE OF THE PRODUCT, INCONVENIENCE,
LOSS OR ANY OTHER DAMAGES, DIRECT OR
CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR
INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH
OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING
THE IMPLIED WARRANTY OF MARKETABILITY APPLICABLE
TO THIS PRODUCT.
Or visit http://us.lgservice.com. Correspondence may also be
mailed to:
LG Electronics Service- Mobile Handsets
P.O. Box 240007, Huntsville, AL 35824
DO NOT RETURN YOUR PRODUCT TO THE ABOVE
ADDRESS. Please call or write for the location of the LG
authorized service center nearest you and for the procedures for
obtaining warranty claims.
Some states do not allow the exclusive limitation of incidental or
consequential damages or limitations on how long an implied
warranty lasts; so these limitations or exclusions may not apply
to you. This warranty gives you specific legal rights and you may
also have other rights which vary from state to state.
VX3400 75
Index
C
E
K
10 Driver Safety Tips 68
Calculator 45
Call Setup 54
Call Timer 32
Call Waiting 17
Callback # 38
Caller ID 17
Edit Codes 53
Emergency #s 53
Entry Mode 39
Erase All 39
Key Tone 47
A
L
Accessories 73
Alarm Clock 44
Animations 41
Answer Call 54
Antenna Care 59
Auto Delete 38
Auto NAM 52
Auto Play 39
Auto Retry 54
Auto Save 38
Auto View 39
Auto Volume 55
Auto Answer 55
Language 51
Large Pictures 40
List Contacts 27
Location 58
Lock Mode 16
Lock Phone 52
Erase Calls 32
Erase Contacts 54
Ez Tip Calc 45
Clocks 50
Consumer Information
on SAR 70
F
FDA Consumer Update
Contacts 26
M
63
Contrast 50
Making Calls 15
Manner Mode 16
Media 40
Fonts 50
D
G
Deleting 23
Dialed Calls 30
Display 49
Driving 59
DTMF Length 48
Getting Started with Your
Phone 13
Menu Style 50
Menus Overview 12
Message Alerts 47
Messages 32
B
Groups 28
Backlight 49
Banner 49
Battery 13
Blocked Calls* 31
I
Missed Calls 31
Msg Settings 38
Mute Function 17
My Animations 42
My Melodies 41
My Phone Number 58
My Pictures 41
Icon Glossary 58
Important Information 7
Inbox 35
In Case of Emergency 29
76 VX3400
R
My Shortcut 45
My VCard 29
Small Pictures 40
Sounds 47
Voice Services 57
Volume 47
Received Calls 31
Receiving Calls 16
Recent Calls 30
Reset Default 54
Restrictions 53
Ringers 47
Speed Dialing 25
Speed Dial 21
Standalone Mode 57
System 51
Volume Quick Adjustment
17
N
New E-mail 27
New Message 33
New Number 27
Notepad 45
W
World Clock 46
T
S
Text Input 18
Theme Colors 50
TIA Safety Information
59
O
S/W Version 58
Safety Information 61
Saved 37
One-Touch Dial 55
Outbox 37
Schedule 43
Tools 43
P
Screen Icons 15
Screens 50
Train Words 58
TTY Mode 55
Turning the Phone On
and Off 14
Pacemakers 60
Phone Info 58
Searching Your Phone’s
Memory 24
Phone Operation 59
Phone Overview 10
Power On/Off Tone 48
Power Saver 51
Security 52
V
Select System 51
Service Alerts 48
Serving System 52
Set NAM 51
Vehicles 60
Voice Dial Prompt 57
Voice Dials 28
Voice Mail 33
Voice Mailbox # 38
Voice Memo 44
Voice Privacy 55
Q
Quick-Text 39
Settings 46
Shortcut Help 58
Signal Strength 14
Signature 38
VX3400 77
Glossary
Terminology
Acronyms and Abbreviations
DTMF
Dual-Tone Multi Frequency (or “touch-
tone”) is a method used to communicate
keys pressed on the phone. Pressing a
key generates two simultaneous tones,
one for the row and one for the column
to determine which key was pressed.
Melody composer
Feature that allows you to create melodies using
the phone's keypad.
EZ Tip Calc
EMS
Enhanced Messaging Service is an
extension to SMS for cellular phones
available on specific networks. An EMS
enabled phone can send and receive
messages with special text formatting
(such as bold or italic), animations,
pictures, icons, sound effects, and
special ring tones. EMS messages sent
to non-EMS devices will be displayed as
SMS transmissions.
Feature for easy bill calculation using the total
cost, tip, and number of people as variables.
ERI
Enhanced Roaming Indicator is a feature
to indicate whether a mobile phone is on
its home system, a partner network, or a
roaming network. Many phones indicate
home vs. roaming as an icon, but ERI
capable phones can clearly indicate
third “partner network” status.
78 VX3400
GPS
Global Positioning System is a system of
satellites, computers, and receivers able
to determine the latitude and longitude
of a specific receiver on Earth. Position
is calculated using time and distance.
SID is used by mobile phones to
recognize when they are in their home
system and can be used for billing
purposes as a unique identification of
the serving system.
IS 2000 Type of digital signaling. It's the second
generation of CDMA digital cellular, an
extension of IS-95. Differences between
signaling types have to do with pilot
signal and links to provide more traffic
channels, and control protocols.
SMS
Short Message Service is a service
available on most digital mobile phones
to send messages between phones or
other devices. Messages are routed a
Short Message Service Center (SMSC),
which attempts to send the message
and, if unsuccessful, possibly retry at a
later time. Message delays or message
loss is possible, especially when
NAM
Number Assignment Module is how the
phone stores the phone number and its
electronic serial number. A multiple
NAM phone can register with multiple
service providers and be set to
automatically switch between
sending between networks. Users can
request delivery confirmation reports.
TTY
Teletypewriter. An electromechanical
typewriter that either transmits or
receives messages coded in electrical
signals. A phone with TTY support is
able to translate typed characters to
voice or translate voice into characters
to display on the TTY.
programmed phone numbers for service
provider areas.
SID
System Identification is a number
transmitted by base stations to identify a
wireless system which conforms to a
TIA cellular or PCS standard.
VX3400 79
Precaución de Seguridad Importante
Lea estas sencillas instrucciones. Romper las reglas puede ser peligroso o ilegal. Se ofrece más
información detallada en esta guía del usuario.
No seguir las instrucciones puede ocasionar lesiones graves o la muerte.
●
No use nunca una batería no aprobada, ya que esto podría dañar el teléfono o la batería, y
podría ocasionar que estalle la batería.
●
Nunca coloque el teléfono en un horno de microondas ya que esto haría que estallara la
batería.
●
Nunca almacene el teléfono a temperaturas menores de -4°F ni mayores de 122°F.
●
No se deshaga de la batería mediante el fuego o con materiales peligrosos o inflamables.
●
Al ir en automóvil, no deje el teléfono ni instale el kit de manos libres cerca de la bolsa de
aire. Si el equipo inalámbrico está instalado incorrectamente y se activa la bolsa de aire,
usted puede resultar gravemente lesionado.
●
No use un teléfono de mano cuando esté conduciendo.
●
No use el teléfono en zonas donde esté prohibido hacerlo. (Por ejemplo: en los aviones)
VX3400 1
Precaución de Seguridad Importante
●
●
No exponga cargador de baterías o el adaptador a la luz directa del sol, ni lo utilice en
sitios con elevada humedad, como por ejemplo el baño.
No use sustancias químicas corrosivas (como alcohol, bencina, solventes, etc.) ni
detergentes para limpiar el teléfono. Existe riesgo de causar un incendio.
●
●
No use el teléfono en zonas donde esté prohibido hacerlo.
No deje caer el teléfono, ni lo golpee o agite fuertemente. Tales acciones pueden dañar
las tarjetas de circuitos internas del teléfono.
●
●
No use el teléfono en áreas altamente explosivas, ya que puede generar chispas.
No dañe el cable de corriente doblándolo, retorciéndolo, tirando de él o calentándolo. No
use la clavija si está suelta, ya que esto puede ocasionar incendios o descargas
eléctricas.
●
●
No coloque objetos pesados sobre el cable de corriente. No permita que el cable de
corriente se doble, ya que esto puede ocasionar incendios o descargas eléctricas.
No manipule el teléfono con las manos húmedas cuando se esté cargando. Puede causar
un choque eléctrico o dañar gravemente el teléfono.
●
No desarme el teléfono.
2 VX3400
●
No haga ni conteste llamadas mientras esté cargando el teléfono, ya que puede causar
un corto circuito en éste o provocar descargas eléctricas o incendios.
●
●
No sostenga la antena ni permita que entre en contacto con su cuerpo durante las llamadas.
Asegúrese de que no entren en contacto con la batería objetos con bordes cortante,
como dientes de animales o uñas. Hay riesgo de causar un incendio.
●
●
Almacene la batería en un sitio alejado del alcance de los niños.
Cuide que los niños no se traguen partes del teléfono, como los tapones de hule (del
auricular, partes conectoras del teléfono, etc.) Esto podría causar asfixia o sofocación,
dando como resultado lesiones graves o la muerte.
●
●
●
Desconecte el enchufe de la toma de corriente y el cargador cuando se ilumina porque puede
provocar unchoque electrico o peligro de incendio.
Sólo use baterías, antenas y cargadores proporcionados por LG. La garantía no se
aplicará a productos proporcionados por otros proveedores.
Sólo personal autorizado debe darle servicio al teléfono y a sus accesorios. La instalación
o servicio incorrectos pueden dar como resultado accidentes y por tanto invalidar la
garantía.
●
Las llamadas de emergencia sólo pueden hacerse dentro de un área de servicio. Para
hacer una llamada de emergencia, asegúrese de estar dentro de un área de servicio y
que el teléfono esté encendido.
VX3400 3
Contenido
Acceso al menú . . . . . . . . . . . . . . . . . . . 26
1. Contactos . . . . . . . . . . . . . . . . . . . . 26
1. Lista de Contactos . . . . . . . . . . . . . . . 27
2. Nuevo Número . . . . . . . . . . . . . . . . . .27
3. Nuevo E-mail . . . . . . . . . . . . . . . . . . . .27
4. Grupos . . . . . . . . . . . . . . . . . . . . . . . . . . 28
5. Marcaciones Rápidas . . . . . . . . . . . . 28
6. Marcaciones por Voz . . . . . . . . . . . . 28
7. Mi VCard . . . . . . . . . . . . . . . . . . . . . . . . 29
8. En caso de emergencia . . . . . . . . . . .29
Bienvenidos . . . . . . . . . . . . . . . . . . . . . . 7
Llamada en espera . . . . . . . . . . . . . . .17
Id. de quien llama . . . . . . . . . . . . . . . 17
Marcado rápido . . . . . . . . . . . . . . . . 17
Información importante . . . . . . . . . . . .7
Información sobre la exposición a
radiofrecuencias de la FCC . . . . . . . . 9
Introduccir y editar información . . . .18
Introducción de texto . . . . . . . . . . . .18
Descripción general del teléfono . . . . .10
Descripción general de los menús . . . . . 12
Contactos en la memoria del teléfono . . . . 20
Aspectos básicos . . . . . . . . . . . . . . . . . . . 20
Personalización de entradas individuales . . . 20
Marcación rápida . . . . . . . . . . . . . . . . . . . 21
Almacenar un número con una pausa . . . 21
Agregar otro número de teléfono . . . . . . . .22
Agregar una pausa a una entrada de contacto . . 22
Cambiar información guardada . . . . . . . . . 23
Cambio del número predeterminado. . . . . 23
Borrar . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Búsqueda en la memoria del teléfono. . . . 24
Hacer llamadas desde la memoria del teléfono . 25
Marcado rápido . . . . . . . . . . . . . . . . . . . . 25
Para hacer funcionar su teléfono por
primera vez . . . . . . . . . . . . . . . . . . . . . . 13
La Batería . . . . . . . . . . . . . . . . . . . . . . 13
Cargar la Batería . . . . . . . . . . . . . . . . 13
Encender y apagar el teléfono . . . . 14
Iconos en pantalla . . . . . . . . . . . . . . .15
Hacer llamadas . . . . . . . . . . . . . . . . . 15
2. Lista Llam . . . . . . . . . . . . . . . . . . . . .30
1. Llam. saliente . . . . . . . . . . . . . . . . . . . 30
2. Llam. entrante . . . . . . . . . . . . . . . . . . . 31
3. Llam. fracasada . . . . . . . . . . . . . . . . . 31
4. Llam.bloqueado* . . . . . . . . . . . . . . . . .31
5. Borrado Llam. . . . . . . . . . . . . . . . . . . .32
6. Tiempo de uso . . . . . . . . . . . . . . . . . . . 32
Acceso rápido a funciones prácticas . 16
Recibir llamadas . . . . . . . . . . . . . . . . 16
Modo de manerae . . . . . . . . . . . . . . 16
Modo de bloqueo . . . . . . . . . . . . . . . 16
Función de silencio . . . . . . . . . . . . . .17
Ajuste rápido del volumen . . . . . . . 17
Sólo disponible cuando todas las llamadas
*
entrantes o las llamadas entrantes de sus
contactos son restrictas en el Menú->
Ambiente-> Seguridad-> Restricciones->
Llamadas-> Llmds entrantes.
4 VX3400
3. Mis Imágenes . . . . . . . . . . . . . . . . . . . 41
4. Sonidos . . . . . . . . . . . . . . . . . . . . . . . . . 41
5. Mi Melodia . . . . . . . . . . . . . . . . . . . . . . 41
6. Animaciónes . . . . . . . . . . . . . . . . . . . . 42
7. Mis Animaciónes . . . . . . . . . . . . . . . . 42
8. Redactor de Melodia . . . . . . . . . . . . 42
1.3 Volumen . . . . . . . . . . . . . . . . . . . . . . . .47
1.4 Alertas Mensaje . . . . . . . . . . . . . . . .47
1.5 Servicio Alertas . . . . . . . . . . . . . . . . 48
1.6 Tono de activación/desactivación . . . . . .48
1.7 Longitud de DTMF . . . . . . . . . . . . . .49
2. Mostrar . . . . . . . . . . . . . . . . . . . . . . 49
2.1 Pendon . . . . . . . . . . . . . . . . . . . . . . . .49
2.2 Iluminación de fondo . . . . . . . . . . . .49
2.3 Pantallas . . . . . . . . . . . . . . . . . . . . . . . 50
2.4 Estilo del menú . . . . . . . . . . . . . . . . 51
2.5 Relojes . . . . . . . . . . . . . . . . . . . . . . . . 51
2.6 Colores de tema . . . . . . . . . . . . . . . .51
2.7 Contraste . . . . . . . . . . . . . . . . . . . . . . 51
2.8 Fuente . . . . . . . . . . . . . . . . . . . . . . . . . .51
2.9 Idioma . . . . . . . . . . . . . . . . . . . . . . . . 52
2.0 Poder Salvo . . . . . . . . . . . . . . . . . . . 52
3. Sistema . . . . . . . . . . . . . . . . . . . . . . .52
3.1 Seleccione Sistema . . . . . . . . . . . . .52
3.2 Fijar NAM . . . . . . . . . . . . . . . . . . . . . . 52
3.3 Auto NAM . . . . . . . . . . . . . . . . . . . . . 53
3.4 Sist.de servicio . . . . . . . . . . . . . . . . . .53
3. Mensajes . . . . . . . . . . . . . . . . . . . . . 32
1. Correo de voz . . . . . . . . . . . . . . . . . . . 33
2. Nuevos Mensaje . . . . . . . . . . . . . . . . .33
3. Entrada . . . . . . . . . . . . . . . . . . . . . . . . .36
4. Salida . . . . . . . . . . . . . . . . . . . . . . . . . . 37
5. Guardado . . . . . . . . . . . . . . . . . . . . . . .38
6. Configuraciones de mensaje . . . . . .38
6.1 Auto guardar . . . . . . . . . . . . . . . . . .39
6.2 Auto borrar . . . . . . . . . . . . . . . . . . . . .39
6.3 Llame al # . . . . . . . . . . . . . . . . . . . . .39
6.4 Correo de voz # . . . . . . . . . . . . . . . . .39
6.5 Firma . . . . . . . . . . . . . . . . . . . . . . . . . .39
6.6 Vista automatica . . . . . . . . . . . . . . . .39
6.7 Modalidad de asentar . . . . . . . . . . .39
6.8 Texto rápido . . . . . . . . . . . . . . . . . . . .39
6.9 Reporduccion automatica . . . . . . .39
7. Borrar Todo . . . . . . . . . . . . . . . . . . . . . .40
5. Aparato . . . . . . . . . . . . . . . . . . . . . . .43
1. Plan . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
2. Alarma de reloj . . . . . . . . . . . . . . . . . .44
3. Memo Vocal . . . . . . . . . . . . . . . . . . . . .44
4. Atajo . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
5. Nota . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
6. EZ Sugerencia . . . . . . . . . . . . . . . . . . .45
7. Calculadora . . . . . . . . . . . . . . . . . . . .45
8. Reloj universal . . . . . . . . . . . . . . . . . . .46
9. Convrtdr unidad . . . . . . . . . . . . . . . . .46
6. Ambiente . . . . . . . . . . . . . . . . . . . . .46
1. Sonidos . . . . . . . . . . . . . . . . . . . . . . .47
1.1 Timbres . . . . . . . . . . . . . . . . . . . . . . . .47
1.2 Tono de tecla . . . . . . . . . . . . . . . . . . .47
4. Media . . . . . . . . . . . . . . . . . . . . . . . . .40
1. Pequeña Img . . . . . . . . . . . . . . . . . . . . 41
2. Grandes Img . . . . . . . . . . . . . . . . . . . . .41
VX3400 5
Contenido
9.1 Mi # de tel . . . . . . . . . . . . . . . . . . . . . .60
4. Seguridad . . . . . . . . . . . . . . . . . . . .53
4.1 Bloq. Teléfono . . . . . . . . . . . . . . . . . .53
4.2 Restricciones . . . . . . . . . . . . . . . . . . 54
4.3 Emergencia #s . . . . . . . . . . . . . . . . . .54
4.4 Editar códigos . . . . . . . . . . . . . . . . . . 55
4.5 Borrar Contactos . . . . . . . . . . . . . . 55
4.6 Restablecer Implícito . . . . . . . . . . . .55
5. Funciones . . . . . . . . . . . . . . . . . . . .56
5.1 Reintento Automático . . . . . . . . . . . 56
5.2 Respuesta de llamada . . . . . . . . . . 56
5.3 Auto Respuesta automát . . . . . . . . 56
5.4 Marcaciones de un toque . . . . . . .56
5.5 Privacidad de voz . . . . . . . . . . . . . . .57
5.6 Auto Volumen . . . . . . . . . . . . . . . . . .57
5.7 Modalidad TTY . . . . . . . . . . . . . . . . 57
6. Modo Standalone . . . . . . . . . . . . . .59
7. Marcaciones para voz . . . . . . . . .59
7.1 Indicador de marcado por voz . . . 59
7.2 Palabras de aprendizaje . . . . . . . . .59
8. Lugar . . . . . . . . . . . . . . . . . . . . . . . . . 59
9. Info de tel . . . . . . . . . . . . . . . . . . . . 60
Áreas de explosivos . . . . . . . . . . . . . .63
Atmósfera potencialmente explosiva . . . . . .63
Para vehículos equipados con bolsas de aire .63
Información de seguridad . . . . . . . .63
9.2 S/W Versión . . . . . . . . . . . . . . . . . . . .60
9.3 Glosario de iconos . . . . . . . . . . . . . .60
9.4 Ayuda de acceso directo . . . . . . . .60
Seguridad . . . . . . . . . . . . . . . . . . . . . . 61
Información de seguridad de la TIA . . . . . . . .61
Exposición a las señales de radiofrecuencia .61
Cuidado de la antena . . . . . . . . . . . .61
Funcionamiento del teléfono . . . . . .61
Sugerencias para un funcionamiento
Actualización de la FDA para los
consumidores . . . . . . . . . . . . . . . . . . . 65
10 Consejos de Seguridad para
Conductores . . . . . . . . . . . . . . . . . . . . 70
Información al consumidor sobre la
SAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Reglas para la compatibilidad con
más eficiente . . . . . . . . . . . . . . . . . . . . .61
Manejo . . . . . . . . . . . . . . . . . . . . . . . . . 61
Dispositivos Electrónicos . . . . . . . 62
Marcapasos . . . . . . . . . . . . . . . . . . . 62
Aparatos para la sordera . . . . . . . . 62
Otros dispositivos médicos . . . . . . 62
Centros de atención médica . . . . . 62
Vehículos . . . . . . . . . . . . . . . . . . . . . . . 62
Instalaciones con letreros . . . . . . 62
Aeronaves . . . . . . . . . . . . . . . . . . . . . . 62
aparatos para la sordera (HAC) de la FCC
para los dispositivos inalámbricos . . . .73
Accesorios . . . . . . . . . . . . . . . . . . . . . .75
DECLARACIÓN DE GARANTÍA
LIMITADA . . . . . . . . . . . . . . . . . . . . . . .76
Índice . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Glosario . . . . . . . . . . . . . . . . . . . . . . . . .80
6 VX3400
Bienvenidos
Felicidades por elegir el avanzado y compacto
teléfono celular VX3400, diseñado para funcionar
con la más reciente tecnología de comunicaciones
móviles digitales: Acceso múltiple de división de
código (Code Division Multiple Access, CDMA).
Junto con las muchas funciones avanzadas del
sistema CDMA, como una claridad de voz
Información importante
Esta guía del usuario contiene información importante
acerca del uso y funcionamiento del teléfono. Lea toda
la información con cuidado antes de usar el teléfono
para obtener un desempeño óptimo y evitar cualquier
daño accidental o uso inadecuado. Cualquier cambio o
modificación no aprobados anulará la garantía.
Cumplimiento de clase B según el artículo 15 de la FCC
Este dispositivo y sus accesorios cumplen con el artículo
15 de las reglas de la FCC. La operación está sujeta a las
dos condiciones siguientes: (1) Este dispositivo y sus
accesorios no podrán causar interferencias dañinas y (2)
este dispositivo y sus accesorios deben tolerar cualquier
interferencia que reciban, incluida aquélla que pueda
provocar un funcionamiento incorrecto.
enormemente mejorada, este teléfono ofrece:
● Capacidad para componer melodías.
● Gran pantalla de cristal líquido de fácil lectura
con luz trasera y 7 líneas, e iconos de estado.
● Localizador, mensajería, correo de voz e
identificador de llamadas.
● Teclado de 22 teclas.
Detalles técnicos
El VX3400 es un teléfono de banda doble que funciona
en las dos frecuencias de Acceso múltiple de división
de código (CDMA): servicios celulares a 800 Mhz y
Servicios de comunicación personal (Personal
Communication Services, PCS) a 1.9 Ghz. Además
VX3400 funciona en el Sistema Avanzado de Teléfono
Móvil (AMPS) y por esta razón lo llamamos como el
teléfono de triple modo. Si una de las estaciones base
de sistema celular, PCS y AMPS está ubicada cerca
de usted, el índice de falla de llamada de un teléfono
● Función de Speakerphone.
● Interface activada por menús con indicaciones
para fácil operación y configuración.
● Respuesta con cualquier tecla, respuesta
automática, remarcado automático, marcado con
una tecla y marcado rápido con 99 ubicaciones
de memoria.
● Funciones bilingües (Inglés y Español).
VX3400 7
Bienvenidos
de triple modo es más bajo que un teléfono de doble
modo o simple modo. La tecnología CDMA usa una
función llamada DSSS (Direct Sequence Spread
Spectrum, Espectro propagado de secuencia directa)
que permite que el teléfono evite que se cruce la
comunicación y que varios usuarios empleen un canal
de frecuencia en la misma área específica. Esto da
como resultado una capacidad 10 veces mayor en
comparación con el modo analógico. Además, las
funciones como handoff (transferencia de enlace)
suave y más suave, handoff duro y tecnologías de
control de la potencia de radiofrecuencia dinámica se
combinan para reducir las interrupciones en las
llamadas. Las redes celular y CDMA PCS constan de
MSO (Oficina de conmutación de telefonía móvil),
BSC (Controlador de estación de base), BTS (Sistema
de transmisión de estación de base) y MS (Estación
móvil).
Institución
designada
Estándar de
CDMA
Descripcón
Interfaz de aire tri-modo CDMA
Protocolo de enlace de radio de
14.4 kbps y operaciones
interbandas
IS-95 adoptado para la interfaz
de aire 1xRTT cdma2000 de
banda de frecuencia PCS
TIA/EIA-95A
TSB-74
Interfaz de aire
básica
ANSI J-STD-008
TIA/EIA-IS2000
ANSI TIA/EIA 553A
MAS-BS
TIA/EIA/IS-634
TIA/EIA/IS/651
TIA/EIA/IS-41-C
TIA/EIA/IS-124
PCSC-RS
Red
Operaciones intersistemas
Comunicación de datos de
no señalización
TIA/EIA/IS-96-B
TIA/EIA/IS-637
IS-801
Speech CODEC
Servicio de mensajes cortos
Servicio de determinación de
posición (gpsOne)
Servicio
Función
TSB-74: Protocolo entre un sistema IS-95A y ANSI J-
STD-008
*
Estación de base celular
Estación de móvil celular
Estación personal PCS
Estación de base PCS
Speech CODEC
TIA/EIA/IS-97
TIA/EIA/IS-98
ANSI J-STD-018
ANSI J-STD-019
TIA/EIA/IS-125
El sistema 1xRTT recibe el doble de suscriptores en
la sección inalámbrica que IS-95. La duración de su
batería es del doble que la de IS-95.
La tabla siguiente muestra algunos de los principales
estándares CDMA.
8 VX3400
accesorios similares de otros fabricantes que tengan
componentes metálicos. Evite el uso de accesorios
que no puedan conservar una distancia de 1.5 cm (0.6
pulgadas) entre el cuerpo del usuario y la parte
posterior del teléfono y que no se hayan probado
para determinar que cumplen los límites de la
exposición a radiofrecuencias de la FCC.
Información sobre la exposición a
radiofrecuencias de la FCC
¡
ADVERTENCIA! Lea esta información antes de
hacer funcionar el teléfono.
En agosto de 1996, la Comisión Federal de
Comunicaciones (FCC) de Estados Unidos, con su
acción en el Informe y orden FCC 96-326, adoptó una
norma de seguridad actualizada para la exposición
humana a la energía electromagnética de Radio
Frecuencias (RF) que emiten los transmisores
regulados por la FCC. Esos lineamientos
Antena externa instalada en un vehículo
(Opcional, en caso de estar disponible)
Debe mantenerse una distancia mínima de 20 cm (8
pulgadas) entre el usuario o transeúnte y la antena
externa montada en el vehículo para satisfacer los
requisitos de exposición a RF de la FCC. Para obtener
más información sobre la exposición a RF, visite el
sitio Web de la FCC en www.fcc.gov.
corresponden a la norma de seguridad establecida
previamente por organismos de estándares tanto de
EE.UU. como internacionales.
El diseño de este teléfono cumple los lineamientos de
la FCC y esas normas internacionales.
Precaución
Contacto corporal durante el funcionamiento
Este dispositivo se ha probado para un
Utilice solamente la antena incluida y aprobada.
El uso de antenas no autorizadas o el hacerle
modificaciones podría deteriorar la calidad de la
llamada, dañar el teléfono, invalidar la garantía o dar
como resultado una violación de los reglamentos de
la FCC. No utilice el teléfono con una antena dañada.
Si una antena dañada entra en contacto con la piel,
puede producirse una pequeña quemadura.
Comuníquese con su distribuidor local para obtener
un reemplazo de la antena.
funcionamiento ordinario manteniendo la parte
posterior del teléfono a 1.5 cm (0.6 de pulgada) del
cuerpo. Para cumplir los requisitos de exposición a
RF de la FCC, debe mantenerse una distancia de
separación mínima de 1.5 cm (0.6 de pulgada) entre el
cuerpo del usuario y la parte posterior del teléfono,
incluida la antena, ya sea extendida o retraída. No
deben utilizarse clips para cinturón, fundas y
VX3400 9
Descripción general del teléfono
1. Audífono
2. Tapa
Pantalla
exterior
3. Pantalla de cristal
4. Tecla Speakerphone
5. Conector del auricular
10. Tecla de navegación
11. Tecla suave derecha
6. Tecla suave izquierda
12. Tecla de mensajes
13. Tecla END/PWR
7. Teclas lateral
8. Tecla SEND
14. Tecla CLR
15. Teclado alfanumérico
9. Mod. de manerae
16. Tecla de modo de bloqueo
17. Micrófono
10 VX3400
1. Audífono
11. Tecla suave derecha Se usa para seleccionar
una acción dentro de un menú.
2. Tapa Abra la tapa para contestar una llamada
entrante y ciérrela para terminar la llamada.
12. Tecla de mensajes Utilícela para recuperar o
enviar mensajes de voz y de texto.
3. Pantalla de cristal Muestra mensajes e iconos
indicadores.
13. Tecla END/PWR Úsela para apagar o encender
el teléfono y para terminar una llamada. También
regresa a la pantalla del menú principal.
4. Tecla Speakerphone Tecla Speakerphone Úsela
para configurar el Modo de Speaker Phone.
14. Tecla CLR Presiónela para borrar un espacio o
un carácter. Manténgala presionada para borrar
palabras completas. También le permitirá
5. Conector del auricular
6. Tecla suave izquierda Se usa para mostrar el
menú de configuración de funciones.
retroceder en los menús, un nivel cada vez.
7. Teclas lateral Úselas para ajustar el volumen del
timbre en modo de espera y el volumen del
auricular durante una llamada.
15. Teclado alfanumérico Úselo para introducir
números y caracteres y para seleccionar
elementos de menú.
8. Tecla SEND Utilícela para hacer o contestar
16. Tecla de modo de bloqueo Úsela en modo de
llamadas.
espera para fijar la función de bloqueo
(manteniéndola presionada
segundos).
unos 3
9. Mod. de manerae Úsela para configurar el modo
(en modo de espera, presione
y
manténgala así durante unos 3 segundos).
17. Micrófono Le permite hablar con la persona que
llama.
10. Tecla de navegación Se usa para tener acceso
rápido a Mensajes, al Sonidos, al Marcado por
voz y a Manos libres Apagado/Encendido.
VX3400 11
Descripción general de los menús
4. Seguridad
1. Bloq. Teléfono
2. Restricciones
3. Emergencia #s
4. Editar códigos
5. Borrar Contactos
6. Restablecer Implícito
1. Contactos
1. Lista de Contactos
2. Nuevo Número
3. Nuevo E-mail
3. Mensajes
1. Correo de voz
2. Nuevos Mensaje
3. Entrada
4. Salida
5. Guardado
6. Configuraciones de mensaje
1. Auto guardar
2. Auto borrar
3. Llame al #
4. Correo de voz #
5. Firma
6. Vista automatica
7. Modalidad de asentar
8. Texto rápido
9. Reporduccion automatica
7. Borrar Todo
1. Entrada
4. Media
6. Ambiente
1. Sonidos
1. Timbres
2. Tono de tecla
3. Volumen
4. Alertas Mensaje
5. Servicio Alertas
6. Tono de activación/
desactivación
7. Longitud de DTMF
2. Mostrar
1. Pendon
2. Iluminación de fondo
3. Pantallas
4. Estilo del menú
5. Relojes
6. Colores de tema
7. Contraste
8. Fuente
9. Idioma
0. Poder Salvo
3. Sistema
1. Seleccione Sistema
2. Fijar NAM
3. Auto NAM
4. Sist.de servicio
1. Pequeña Img
2. Grandes Img
3. Mis Imágenes
4. Sonidos
4. Grupos
5. Marcaciones Rápidas
6. Marcaciones por Voz
7. Mi VCard
5. Mi Melodia
6. Animaciónes
7. Mis Animaciónes
8. Redactor de Melodia
5. Funciones
1. Reintento Automático
2. Respuesta de llamada
3. Auto Respuesta automát
4. Marcaciones de un toque
5. Privacidad de voz
6. Auto Volumen
7. Modalidad TTY
6. Modo Standalone
7. Marcaciones para voz
1. Indicador de
marcado por voz
2. Palabras de aprendizaje
8. Lugar
9. Info de tel
1. Mi # de tel
8. En caso de emergencia
2. Lista Llam
1. Llam.saliente
5. Aparato
1. Plan
2. Alarma de reloj
1. Alarma 1
2. Alarma 2
2. Llam.entrante
3. Llam.fracasada
4. Llam.bloqueado*
5. Borrado Llam.
1. Llamadas de Salida
2. Llamadas de Entrada
3. Llamadas no Recibidas
4. Todas Llamadas
6. Tiempo de uso
1. Última Llamada
2. Llamadas de Base
3. Llamadas de Roam
4. Todas las Llamadas
3. Alarma 3
4. Alarma rápida
3. Memo Vocal
4. Atajo
2. Salida
3. Guardado
4. Todos
5. Nota
2. S/W Versión
3. Glosario de iconos
4. Ayuda de acceso directo
6. EZ Sugerencia
7. Calculadora
8. Reloj universal
9. Convrtdr unidad
Sólo disponible cuando todas las llamadas
entrantes o las llamadas entrantes de sus
contactos son restrictas en el Menú->
Ambiente-> Seguridad-> Restricciones->
Llamadas-> Llmds entrantes.
*
Algunos contenidos de esta guía del usuario pueden ser distintos de su teléfono en
función del software del teléfono o de su proveedor de servicios. Las funciones y
especificaciones están sujetas a cambios sin previo aviso.
12 VX3400
Para hacer funcionar su teléfono por primera vez
La Batería
Cargar la Batería
El cargador de escritorio tiene una ranura de carga que puede
recibir al teléfono con la batería en su sitio o la batería sola:
El teléfono viene con una batería recargable.
Conserve cargada la batería cuando no use el
teléfono, para mantener al máximo el tiempo de
llamada y de espera.
NOTA Es importante cargar completamente la batería
antes de usar el teléfono por primera vez.
1. Conecte el terminal del adaptador AC en el teléfono
(con la batería instalada) y el otro terminal en el
tomacorriente de la pared.
2. El tiempo de carga varía en función del nivel de la
batería.
NOTA La vida de la batería y la potencia de la señal son
factores significativos (entre otros) que afectan la capacidad de
su teléfono de hacer o recibir llamadas.
AVISO
Use únicamente un accesorio de carga aprobado para cargar su
teléfono LG.
Instalación de la Batería
Para instalar la batería, introduzca la parte inferior de
la batería en la abertura que hay en la parte posterior
del teléfono. Empuje la batería hacia abajo hasta que
el seguro haga clic. Alinee la tapa de la batería sobre
ésta y deslícela ligeramente hacia arriba hasta que
entre en su sitio con un clic.
La manipulación inadecuada del puerto de carga, así como el uso
de un cargador no compatible pueden ocasionarle daños a su
teléfono y anular la garantía.
AVISO
El símbolo de triángulo
debe estar hacia arriba.
Extraer la Batería
Apague el teléfono. Apague la corrientes, tire hacia
abajo de la tapa de la batería y quítela. Use la abertura
en forma de media luna que está cerca de la parte
superior de la batería para levantar y sacar ésta.
VX3400 13
Para hacer funcionar su teléfono por primera vez
Los cargadores con dos surcos en la parte
Fuerza de la señal
inferior NO son compatibles con este
La calidad de las llamadas depende de la fuerza de la
modelo de teléfono. Insertar este tipo de
cargador en el teléfono puede dañar el
señal en su zona. La fuerza de la señal se muestra en
puerto de carga. Este cargador es
la pantalla según el número de barras que aparecen
compatible con el VX1000, VX3200,
VX3300, VX4650, VX4700, VX5200,
junto al icono de fuerza de la señal: Entre más barras
VX6100, VX7000, VX8000, VX8100 y
haya, mejor será la fuerza de la señal. Si la calidad de
VX9800.
la señal es mala, trasládese a un sitio abierto. Si está
El cargador correcto tiene sólouna ranura en
en un edificio, la recepción puede ser mejor cerca de
la parte inferior. Este cargador funciona con
una ventana.
todos los teléfonos arriba enumerados,
así como con el VX3400, VX3450, VX5300
y VX8300.
Encender y apagar el teléfono
Encender el teléfono
Nivel de carga de la Batería
1. Instale una batería cargada o conecte el teléfono a
una fuente de corriente externa, como el
adaptador del encendedor del auto, o a un kit de
manos libres para automóvil.
El nivel de carga de la batería se muestra en la parte
superior derecha de la pantalla de cristal líquido. Cuando
el nivel de carga de la batería es bajo, el sensor de
batería baja le avisa de tres formas: haciendo sonar un
tono audible, haciendo parpadear el icono de la batería y
2. Presione
durante unos segundos hasta que se
encienda la pantalla de cristal líquido.
¡
mostrando la leyenda LOW BATTERY WARNING!
Si el nivel de carga de la batería llega a estar muy bajo,
el teléfono se apaga automáticamente y no se guarda
ninguna función en curso.
.
NOTA Como con cualquier otro dispositivo de radio,
evite el contacto innecesario con la antena cuando el
teléfono esté encendido.
Apagar el teléfono
1. Mantenga presionada
pantalla.
hasta que se apague la
Totalmente cargada
Vacío
14 VX3400
Iconos en pantalla
Hacer llamadas
Cuando el teléfono está encendido, la línea superior
de la pantalla de cristal líquido muestra iconos que
indican el estado del teléfono. Para ver el glosario de
iconos, vaya en su teléfono a Menú -> Ambiente ->
Info de tel -> Glosario de iconos.
1. Asegúrese de que el teléfono esté encendido.
Si no lo está, oprima
segundos.
durante unos tres
2. Introduzca el número de teléfono (si es
necesario, introduzca el código de bloqueo).
Indicador de la fuerza de la señal. La fuerza de la señal que recibe el
teléfono se indica mediante el número de barras visibles.
3. Presione
.
Indicador de la batería. Indica el nivel de carga de la batería.
4. Presione
para dar por terminada la llamada.
Indicador de estado activo. Se está realizando una llamada.
* La ausencia de icono indica que el teléfono está en modo de espera.
Corrección de errores de marcado
Indicador de ausencia de servicio. El teléfono no está recibiendo una señal de sistema.
Oprima
una vez para borrar la última cifra
Nuevo texto msj
introducida o manténgala oprimida durante al
menos 2 segundos para borrar todas las cifras.
Nuevo texto & voz
Nuevo voz msj
Silenciar todo
Alravoz Activado
Mod. de manerae
TTY
Roaming
IS-2000
Alarma
Digital
Analógico
Privacidad de voz
Ubicación activada
Modo Standalone
Sólo E911
VX3400 15
Acceso rápido a funciones prácticas
Remarcado de llamadas
1. Oprima dos veces para volver a marcar la
última llamada.
Modo de manerae
Ajusta el teléfono para vibrar en lugar de sonar (se
muestra
). Para ajustar el Modo de manerae y
. Para volver al Modo
mantenga oprimida
NOTA La primera vez que oprime
su teléfono
normal, mantenga oprimida
.
muestra el historial de las últimas 90 llamadas telefónicas.
También puede seleccionar cualquiera de éstas para volver
a marcarlas.
Modo de bloqueo
Ajusta su teléfono para que se requiera su
contraseña de 4 cifras para usar el teléfono.
Recibir llamadas
NOTA Hasta que lo cambie, el código de bloqueo o
contraseña son las últimas 4 cifras de su número de
teléfono.
1. Abra la tapa o use
llamada.
para contestar a una
NOTA Si oprime la tecla suave izquierda
[Silenc.]
Para bloquear rápidamente su teléfono, oprima
durante tres segundos. Para cancelar, oprima
mientras está sonando el teléfono, se silencia el timbre o la
vibración para esa llamada.
la tecla suave derecha
la contraseña.
[Desbloq] e introduzca
NOTA Si oprime la tecla suave derecha
[Ignorar]
mientras está sonando el teléfono, la llamada se finalizará.
2. Oprima
para terminar la llamada.
16 VX3400
Función de silencio
Id. de quien llama
La función Silenciar evita la transmisión de su voz a
la persona que llama. Para activar Silencio
rápidamente, oprima la tecla suave izquierda
[Mudo], y para cancelarlo oprima la tecla suave
Id. de quien llama muestra el número o el nombre
de la persona que llama cuando suena su teléfono.
Compruebe con su proveedor de servicio para
cerciorarse de que ofrezca esta función.
izquierda
[Qu.mudo].
Marcado rápido
El marcado rápido le permite hacer llamadas de
teléfono rápida y fácilmente con unas pocas
presiones de tecla. El número 1 de marcado rápido
está configurado para llamar a su Correo de voz.
Ajuste rápido del volumen
Ajuste rápidamente los volúmenes del timbre y del
audífono oprimiendo el extremo superior de la
tecla lateral para aumentarlo o el extremo inferior
para disminuirlo.
Para hacer Marcados rápidos
Para los marcados rápidos del 1 al 9 mantenga
NOTA El volumen del audífono puede ajustarse durante
una llamada y el volumen del pitido de teclas sólo pueden
ajustarse mediante el Menú.
oprimido el número de marcado rápido.
Para los marcados rápidos del 10 al 99, oprima la
primera cifra y luego mantenga oprimida la tecla de
la segunda cifra.
Llamada en espera
Durante una llamada, un pitido indica otra llamada
entrante. Compruebe con su proveedor de servicio
para obtener información sobre esta función.
NOTA Otra forma de hacer el Marcado rápido es
introducir los números de marcado rápido y oprimir
.
Oprima
oprima
para recibir la llamada en espera y
de nuevo para alternar entre llamadas.
VX3400 17
Introducir y editar información
Modos de introducción de texto
En un campo de texto, oprima la tecla suave
izquierda para mostrar los modos de texto.
Introducción de texto
Las siguientes funciones de tecla están disponibles
para ayudar a la introducción de texto:
Modo de palabra T9
Funciones de las teclas
Escriba texto usando una presión de tecla por
cada letra. Las combinaciones de teclas se
traducen en palabras comunes con las letras de
cada tecla y una base de datos comprimida.
Tecla suave izquierda: Oprima para
desplazarse y acceder a los siguientes
modos de introducción de texto.
Mayús: Oprima para cambiar de
mayúsculas y minúsculas (mayúscula
inicial, bloqueo de mayúsculas,
minúsculas).
1. Oprima la tecla suave izquierda
para
cambiar al modo [Pala.T9].
2. Oprima
3. Oprima
.
Siguiente: Oprima para mostrar otras
palabras coincidentes.
para completar la palabra y
agregar un espacio.
Espacio: Oprímalo para aceptar una
palabra e introducir un espacio.
4. Oprima
.
Borrar: Oprímala para borrar un solo
espacio o carácter. Manténgala oprimida
para borrar palabras.
Se muestra Ball vie office.
Puntuación: Oprima para introducir
puntuación.
18 VX3400
Uso de la tecla SIG
2. Presione
Aparece 5551212.
.
Cuando haya terminado de introducir una palabra,
si la palabra que aparece no es la que usted
Modo de símbolos
desea, presione
de la base de datos.
para mostrar otras palabras
Introduzca caracteres especiales en su texto. Elija
entre 39 caracteres especiales, incluido “SP” para
insertar un espacio y “LF” para hacer que el texto
pase a la línea siguiente.
1. Oprima la Tecla suave izquierda
al modo de Símbolos.
Aparece Home.
1. Presione
.
2. Presione
.
La pantalla le da opciones adicionales tales
como: Inme, Góme, Hond, etc.
para pasar
Uso de la entrada de texto Abc (Multi-toque)
2. Oprima la tecla suave derecha
[Siguien.] para
Escriba el texto oprimiendo las teclas varias veces
para palabras que no estén en la base de datos del
teléfono.
ver los siguientes 12 símbolos o la tecla suave
izquierda
[Anter.] para ver los 12 anteriores.
1. Presione la Tecla suave izquierda
pasar a modo Abc.
para
3. Use
para resaltar el carácter especial que
desea introducir y oprima
para seleccionarlo.
para pasar
2. Presione
para cambiar a Bloqueo de
4. Oprima la Tecla suave izquierda
a otro modo de texto.
mayúsculas ABC.
3. Presione
. Aparece LG.
Cambiar entre mayúsculas y minúsculas
Establezca las mayúsculas antes de escribir.
Oprima
/ Abc), bloqueo de mayúsculas (PALA.T9 / ABC), y
minúsculas (pala.T9 / abc).
Modo 123 (Números)
Escriba números oprimiendo cada tecla sólo una
para elegir mayúscula inicial (Pala.T9
vez.
1. Presione la Tecla suave izquierda
pasar a modo 123.
para
VX3400 19
Contactos en la memoria del teléfono
Entradas de contactos
Puede almacenar hasta 300 entradas con hasta 5
números telefónicos cada una.
Personalización de entradas individuales
1. Oprima la tecla suave derecha
[Contactos].
2. Use para seleccionar una entrada y oprima
.
Aspectos básicos
3. Presione la tecla suave izquierda
4. Use para seleccionar la información que
desea personalizar.
[Modific.].
1. En el modo de espera introduzca el número de
teléfono (de hasta 48 dígitos) y oprima la Tecla
suave izquierda
[Guardar].
2. Use
presione
para seleccionar una Etiqueta y
.
5. Cambie la entrada como desee y oprima
para guardar los cambios.
Base / Base2 / Oficina / Oficina2 / Móvil /
Móvil2 / Biper / Fax / Fax2 / Ninguno
Correo electrónico
Le permite introducir una dirección de correo
electrónico en la entrada de contacto.
3. Use
y oprima
para seleccionar dónde desea guardar,
.
Grupo
Le permite organizar sus Contactos en grupos.
Nuevo Nombre / Existiendo
4. Introduzca el nombre (hasta 22 caracteres) del
Tono de timbre de llamada
número telefónico y presione
.
Ajusta el teléfono para que reproduzca un tono de
timbre especial cuando el Contacto le llama por
teléfono.
5. Presione
para salir [Termin.].
Alerta de mens. TXT
Ajusta el teléfono para que reproduzca un tono de
timbre especial cuando llega un mensaje.
20 VX3400
Memorándum
5. Use
para seleccionar Fijar marcacion
Le permite introducir un memorándum para el
contacto (por ej., cumpleaños, dirección, etc.) de
hasta 70 caracteres.
rapida y oprima
.
6. Introduzca una cifra de marcado rápido.
Id. de imagen
Ajusta una imagen para que se muestre con objeto
de identificar a la persona que llama a su teléfono.
●
Use el teclado y oprima
Use para seleccionar la cifra de marcado
rápido y oprima
.
●
.
Marcación rápida
Le permite configurar sus Marcaciones rápidas.
Almacenar un número con una pausa
Las pausas le permiten introducir series de
números adicionales en sistemas de acceso
automatizado, como el Correo de voz o los
números de facturación de tarjeta de crédito. Los
tipos de pausa son : Espera (W) El teléfono deja de
marcar hasta que usted oprima la tecla suave
izquierda [Soltar] para enviar al siguiente número.
2 seg (P) El teléfono espera 2 segundos antes de
enviar la siguiente cadena de cifras.
NOTA Debe estar activado el Marcado de una tecla
para usar los Marcados rápidos que configuró. Menú de
acceso->
->
->
-> Habilitar.
1. Oprima la tecla suave derecha
[Contactos].
2. Use para seleccionar una entrada y oprima
.
3. Presione la Tecla suave izquierda
4. Oprima la tecla suave derecha
[Modific.].
1. Introduzca el número y oprima la tecla suave
[Opciones].
derecha
[Opciones].
NOTA Si ha guardado más de un número en la entrada
2. Use
para seleccionar la pausa Espera /
del Contacto, deberá usar
número de teléfono.
para resaltar primero el
Pausa 2 seg y oprima
.
VX3400 21
Contactos en la memoria del teléfono
3. Introduzca números adicionales (por ejemplo,
el nip o el número de tarjeta de crédito, etc.).
Desde la pantalla Lista de contactos
1. Oprima la tecla suave derecha
2. Seleccionar una entrada y oprima
3. Oprima la tecla suave izquierda
[Contactos].
4. Oprima la tecla suave izquierda
y siga guardando la entrada de Contacto según
lo necesite.
[Guardar] y
.
[Modific.].
4. Use
y oprima
para seleccionar [Agregar Números],
.
Agregar otro número de teléfono
5. Introduzca el número de teléfono y oprima
,
En el modo de espera
luego siga guardando la entrada según lo necesite.
1. Introduzca un número de teléfono y oprima la
tecla suave izquierda
2. Use para resaltar Base / Base2 / Oficina /
Oficina2 / Móvil / Móvil2 / Biper / Fax / Fax2 /
Ninguno, y oprima
[Guardar].
Agregar una pausa a una entrada de contacto
1. Oprima la tecla suave derecha
[Contactos].
2. Use
para seleccionar una entrada , y
oprima la tecla suave izquierda
[Modific.].
.
3. Use para seleccionar el número y oprima
, luego oprima la tecla suave derecha
3. Use
presione
para seleccionar una Existiendo y
.
[Pausa].
4. Oprima
5. Introduzca números adicionales y oprima
4. Use
para resaltar la entrada de contacto
Espera o
Pausa 2 seg.
existente y oprima
.
.
5. Oprima
para guardar.
6. Siga guardando la entrada de Contactos según
sea necesario.
22 VX3400
Cambiar información guardada
Para cambiar cualquier información que haya
guardado, acceda a la pantalla Editar Entrada:
1. Oprima la tecla suave derecha
2. Use para resaltar la entrada de contacto
que desea editar y oprima
3. Oprima la tecla suave izquierda
4. Use para resaltar el número de teléfono que
desea configurar como número predeterminado
y oprima la tecla suave derecha [Opciones].
5. Oprima Fijar Como valor Implícito.
Aparece un mensaje de confirmación.
[Contactos].
.
1. Oprima la tecla suave derecha
2. Use
oprima la tecla suave izquierda
[Contactos].
[Modific.].
para seleccionar una entrada
, y
[Modific.].
3. Use
para seleccionar la información que
desea cambiar y oprima
.
4. Haga los cambios y oprima
.
Cambio del número predeterminado
Borrar
El Número predeterminado es el número de
teléfono que introdujo al crear el contacto. Se
puede guardar otro número como Número
predeterminado.
Borrar un número de teléfono
1. Seleccione el entrada des Contactos para editar.
2. Use
teléfono que desea borrar.
3. Oprima la tecla suave derecha
para seleccionar le numéro de
NOTA La opción Ajustar como predeterminado sólo
aparece si el Contacto tiene al menos dos números de
teléfono y usted selecciona cualquier número de teléfono
que no sea el primero.
[Opciones].
4. Seleccione Borrar Número.
Aparecerá un mensaje de confirmación.
5. Oprima para Borrar.
VX3400 23
Contactos en la memoria del teléfono
NOTA Si intenta borrar el número predeterminado,
Búsqueda en la memoria del teléfono
aparecerá un mensaje de error.
Puede buscar información que almacenó en su
teléfono VX3400. Desplácese por sus contenidos
de la A a la Z, o salte directamente a una letra
determinada del alfabeto.
Borrar una entrada de contacto
1. Seleccione el entrada des Contactos.
2. Oprima la tecla suave derecha
y oprima Borrar.
[Opciones],
Desplazamiento por sus contactos
1. Oprima la Tecla suave derecha
[Contactos].
3. Aparece un mensaje de confirmación. Oprima
para borrar o para cancelar y
Se muestra la lista de contactos en orden
alfabético.
conservar la entrada de Contacto.
2. Use
Búsqueda por letra
1. Oprima la Tecla suave derecha
para desplazarse por la lista.
Borrar un marcado rápido
1. Seleccione el entrada des Contactos, y oprima la
[Contactos].
tecla suave izquierda
[Modific.].
Se muestra la lista de contactos en orden
alfabético.
2. Oprima la tecla suave derecha
[Opciones].
2. Presione una vez (o varias) la tecla que corresponda
a la letra de la búsqueda.
3. Oprima
4. Oprima
Deshacer marcación rápida.
Deshacer.
24 VX3400
Hacer llamadas desde la memoria del teléfono
Una vez que haya almacenado números de
teléfono en sus Contactos, puede llamar a esos
números de manera rápida y sencilla.
Marcado rápido
El marcado rápido es una función conveniente que
le permite hacer llamadas de teléfono rápida y
fácilmente. Designe Contactos de marcado rápido
y habilite el Marcado de una tecla antes para usar
esta función de llamada.
Desde Contactos
1. Oprima la Tecla suave derecha
[Contactos].
NOTA El número 1 de marcado rápido es para Correo
de voz.
2. Use
para resaltar la entrada de Contacto.
para hacer la llamada.
3. Oprima
Marcados rápidos del 1 al 9
NOTA Al oprimir
predeterminado. Si hay varios números guardados en la
entrada, oprima para ver el contenido de la entrada de
se marca el número
Mantenga oprimido el número de marcado rápido.
Su teléfono recuerda el número de sus Contactos,
lo muestra brevemente y lo marca.
Contacto, resalte el que desea llamar y oprima
.
Marcados rápidos del 10 al 99
Oprima la primera cifra de marcado rápido y luego
mantenga oprimida la tecla de la segunda cifra.
Desde Llamadas recientes
1. Oprima la Tecla suave izquierda
[Menú].
2. Presione
3. Use
Lista Llam.
para seleccionar el tipo de llamada
NOTA También puede introducir las cifras de Marcado
rápido y oprimir
.
reciente y presione
Llam.saliente / Llam.entrante / Llam.fracasada
.
Para los marcados rápidos de 97, 98 y 99
El valor predeterminado es 97(#BAL), 98(#MIN) y
99(#PMT). El usuario puede cambiar este marcado
rápido si es necesario.
4. Use
oprima
para resaltar la que desea llamar y
para marcarla.
VX3400 25
Contactos
Acceso al menú
Presione la tecla suave izquierda
tener acceso a nueve menús del teléfono. Hay dos
métodos para llegar a los menús y submenús:
Contactos
[Menú] para
El Menú de contactos le permite almacenar
nombres, números de teléfono y otros datos en la
memoria de su teléfono. Al entrar a sus Contactos,
el número en paréntesis representa el número de
entradas que ha almacenado (hasta 300).
●
Use la tecla de navegación para resaltar y
seleccionar, o bien
Presione la tecla de número que corresponda al
menú o submenú.
●
Acceso y Opciones
1. Oprima la tecla suave
Por ejemplo:
1. Oprima la tecla suave izquierda
izquierda
[Menú].
[Menú].
2. Presione
Contactos.
Se muestran nueve elementos de menú.
Use
para desplazarse por la lista de
3. Seleccione un submenú.
menús.
1. Lista de Contactos
2. Nuevo Número
3. Nuevo E-mail
2. Oprima al elemento del menú que desea
seleccionar. Aparecerá la lista del submenú.
3. Oprima al elemento del submenú que desea
seleccionar.
4. Grupos
4. Use
para resaltar una ambiente y presione
para seleccionarlo.
5. Marcaciones Rápidas
6. Marcaciones por Voz
7. Mi VCard
NOTA Oprima
para retroceder un paso. Esto
8. En caso de emergencia
cancelará sin guardar.
26 VX3400
Contactos
1. Lista de Contactos
Le permite ver su lista de Contactos.
1. Presione
2. Introduzca el número y presione
3. Seleccione la etiqueta que desea y presione
4. Introduzca el nombre y presione
,
,
.
.
1. Presione
,
,
.
.
2. Opciones desde este punto:
.
●
Presione
para desplazarse por sus
5. Siga guardando la entrada según lo necesite.
Contactos en orden alfabético.
●
Presione la tecla suave derecha
[Opciones]
3. Nuevo E-mail
Le permite agregar un nuevo e-mail como nueva
entrada de Contacto.
para seleccionar uno de los siguientes:
Enviar Mensaje / Buscar Nombre / Buscar
Número / Buscar Marcación Rápida / Buscar
Grupo / Buscar E-mail / Borrar/ Fijar como
emergencia
NOTA Para guardar el e-mail en un Contacto existente,
edite la entrada del Contacto.
●
Presione la Tecla suave izquierda
[Nuevo]
1. Presione
2. Introduzca la dirección de correo electrónico y
oprima
3. Introduzca el nombre y presione
,
,
.
para Nuevo Número de Nuevo E-mail.
.
2. Nuevo Número
Le permite agregar un nuevo número como nueva
entrada de Contacto.
.
4. Siga guardando la entrada según lo necesite.
NOTA Para guardar el número en un Contacto
existente, edite la entrada del Contacto.
VX3400 27
Contactos
4. Grupos
NOTA Oprima la tecla suave derecha
para saltar al siguiente Marcado rápido disponible, eliminar
un Marcado rápido o eliminar todos los Marcados rápidos.
[Opciones]
Le permite ver sus Contactos agrupados, agregar
un nuevo grupo, cambiar el nombre de un grupo o
borrar todo un grupo.
2. Use
rápido o bien introduzca el número de Marcado
rápido y presione
para resaltar la posición de Marcado
1. Presione
,
,
.
2. Opciones desde este punto:
.
●
Use
para resaltar un grupo que desee ver y
3. Use
para resaltar el Contacto y presione
presione
.
.
●
●
Presione la Tecla suave izquierda
[Agregar] para agregar un grupo nuevo a la
lista.
4. Use
para resaltar el número y oprima
.
6. Marcaciones por Voz
Le permite agregar, ver o borrar comandos de
Marcado por voz.
Use
para resaltar un grupo y presione la
[Opciones] para
Tecla suave derecha
cambiar el nombre del grupo o para borrardo.
Modif. Título / Borrar Grupo
1. Presione
,
,
.
2. Opciones desde este punto:
●
5. Marcaciones Rápidas
Le permite ver su lista de Marcados rápidos o
designar Marcados rápidos para números
introducidos en sus Contactos.
Presione la Tecla suave izquierda
para grabar un comando de Marcado por voz.
Siga las indicaciones del teléfono.
[Nuevo]
●
Use
para resaltar un Marcado por voz y
1. Presione
,
,
.
presione la tecla suave derecha
28 VX3400
Contactos
[Opciones] para elegir una de las siguientes:
Jugar / Volver a grabar / Borrar / Borrar Todo
o borrar las notas usted mismo según lo necesite,
en caso de que ocurra una emergencia.
1. Para programar un nuevo número de la
NOTA Las grabaciones deben hacerse en posición de
uso normal (el auricular cerca de su oído y el micrófono
cerca de su boca) hablando con claridad. Deben usarse
kits de manos libres para automóvil o diademas si el
teléfono se usa principalmente con ellos.
emergencia, oprima
2. Use para resaltar el Contacto y oprima la
tecla suave izquierda [Agregar]. Usted
,
,
.
puede elegir un contacto por 1 acuciante, o
incorpore un número por 2 acuciantes.
7. Mi VCard
Le permite introducir su propia tarjeta de
presentación virtual que se utiliza en mensajes
SMS.
De Contactos: Use
contacto y oprima
para resaltar una
. Usted conseguirá un
mensaje "Contacto de la Emergencia Asignado".
Incorpore el número: Incorpore el número de
1. Presione
2. Use
,
,
.
para seleccione la función que quiere
emergencia del contacto y oprima
. Y
modificar resaltándola y presionando
.
incorpore el nombre del contacto, y oprima
Nuevo contacto de emergencia esté asignado.
.
3. Modificar información según lo necesite.
Info del Contacto de Emergencia
1. Para ver del información del contacto de
información, oprima la tecla suave izquierda
8. En caso de emergencia
Le permite que usted almacene el nombre, los
números de teléfono y la otra información, que
serán muy provechosos en cualquier caso de la
emergencia. También le permite leer, añadir, editar
,
,
. Seleccionar el Contacto con
.
y oprima
VX3400 29
Lista Llam
Lista Llam
El Menú de llamadas recientes es una lista de los
últimos números de teléfono o entradas de
Contactos de llamadas que haya realizado,
contestadas o perdido. Se actualiza
Acceso y Opciones
1. Oprima la tecla suave
izquierda
[Menú].
Lista Llam.
2. Presione
3. Seleccione un submenú.
1. Llam.saliente
2. Llam.entrante
3. Llam.fracasada
4. Llam.bloqueado*
5. Borrado Llam.
6. Tiempo de uso
constantemente con los nuevos números
agregándose al principio de la lista y las entradas
más antiguas eliminándose del final.
NOTA Para ver una lista rápida de todas sus llamadas
recientes, presione
desde el Menú principal.
●
indica una llamada realizada.
indica una llamada recibida.
indica una llamada perdida.
●
●
1. Llam.saliente
Lista de llamadas salientes, hasta 30.
1. Presione
2. Use
,
,
.
para resaltar una entrada y luego
para ver la entrada.
●
Presione
●
Presione
para llamar a ese número.
30 VX3400
Lista Llam
●
●
●
Oprima la tecla suave derecha
para seleccionar:
Guardar(Info de Contacto) / Enviar Msj /
Prepend / Borrar / Borrar Todo
[Opciones]
Presione
para llamar a ese número.
Oprima la tecla suave derecha
para seleccionar:
Guardar(Info de Contacto) / Enviar Msj /
Prepend / Borrar / Borrar Todo
[Opciones]
2. Llam.entrante
Lista de llamadas entrantes, hasta 30.
4. Llam.bloqueado*
Muestra la lista de llamadas bloqueadas, hasta 30.
1. Presione
2. Use
,
,
.
1. Presione
,
,
.
para resaltar una entrada y luego
para ver la entrada.
2. Introduzca el código de bloqueo de cuatro
cifras. El código de bloqueo es, generalmente,
las últimas 4 cifras de su número de teléfono.
●
Presione
●
Presione
para llamar a ese número.
●
Oprima la tecla suave derecha
para seleccionar:
[Opciones]
2. Use
para resaltar una entrada y luego
●
Presione
para ver la entrada.
Guardar(Info de Contacto) / Enviar Msj /
Prepend / Borrar / Borrar Todo
●
●
Presione
Oprima la Tecla suave derecha
para seleccionar:
para llamar a ese número.
[Opciones]
3. Llam.fracasada
Lista de llamadas perdidas, hasta 30.
Guardar(Info de Contacto)/ Enviar Msj/
Prepend/ Borrar/ Borrar Todo
1. Presione
2. Use
,
,
.
Sólo disponible cuando todas las llamadas entrantes o las llamadas
entrantes de sus contactos son restrictas en el Menú-> Ambiente->
Seguridad-> Restricciones-> Llamadas-> Llmds entrantes. Para el Info
en cómo bloquear llamadas, vea la página 53.
*
para resaltar una entrada y luego
para ver la entrada.
●
Presione
VX3400 31
Mensajes
5. Borrado Llam.
Le permite borrar las listas de llamadas que desee.
Mensajes
Los mensajes de texto, los mensajes de localizador
y el buzón de correo de voz están disponibles en
cuanto se enciende el teléfono.
NOTA Si el menú Llam.bloqueado no se activa, el menú
Borrado Llam. aparece comó
de uso aparece como
, y el menú el Tiempo
●
Compruebe los tipos de mensajes presionando
.
la tecla de mensajes
.
1. Presione
2. Use
,
,
.
●
Haga una llamada al número de devolución de
llamada presionando
de mensajes.
durante una comprobación
para resaltar la lista de las llamadas
que desea borrar y presione
.
●
Lea y modifique mensajes guardados en el buzón
de salida durante la transmisión y envíelos.
Llamadas de Salida / Llamadas de Entrada /
Llamadas no Recibidas / Todas Llamadas
Acceso y Opciones
3. Presione
Borrar o
Cancelar.
1. Oprima la tecla suave
izquierda
[Menú].
6. Tiempo de uso
Le permite ver la duración de las llamadas
seleccionadas.
2. Presione
Mensajes.
3. Seleccione un submenú.
1. Correo de voz
2. Nuevos Mensaje
3. Entrada
1. Presione
,
,
.
2. Use
para resaltar una lista de llamadas y
.
presione
4. Salida
5. Guardado
6. Configuraciones de mensaje
7. Borrar Todo
Última Llamada / Llamadas de Base / Llamadas
de Roam / Todas las Llamadas
32 VX3400
Mensajes
El teléfono puede almacenar hasta 115 mensajes
(por ejemplo, 50 mensajes de texto de buzón de
entrada, 50 mensajes de texto de buzón de salida,
15 mensajes de texto guardados). El VX3400
permite hasta 160 caracteres por mensaje, incluida
la información del encabezado. La información
almacenada en el mensaje está determinada por el
modo del teléfono y la capacidad del servicio.
Puede haber otros límites al número de caracteres
disponibles por cada mensaje. Pregunte a su
proveedor de servicios acerca de las funciones y
capacidades del sistema.
1. Correo de voz
Le permite ver los nuevos mensajes de voz
grabados en el buzón de correo de voz. Una vez
alcanzado el límite de almacenamiento, se
sobrescriben los mensajes antiguos. El teléfono le
alertará cuando reciba un nuevo mensaje de voz.
Para Comprobar su Buzón de Correo de Voz
1. Presione
,
,
.
2. Opciones desde este punto:
●
Presione
para escuchar el mensaje o mensajes.
Aviso de mensaje nuevo
●
Presione la tecla suave izquierda
[Eliminar]
El teléfono le alerta cuando recibe un nuevo
mensaje. Verá que se muestra Mensaje
nuevo a la mitad de la pantalla y el icono de
mensaje ( ) También podría escuchar una
alerta de mensaje, si la configuró. Puede
aparecer Mensaje urgente si el remitente lo
envió como mensaje urgente.
para borrar la información y después seleccione
Borrar cuenta.
2. Nuevos Mensaje
Le permite enviar mensajes de texto, localizador y
transmisiones de correo electrónico. Cada
mensaje tiene un destino (Dirección 1) e
información (Mensaje). Estos dependen del tipo de
mensaje que desea enviar.
VX3400 33
Mensajes
Aspectos básicos de los mensajes de texto
3. Seleccione la opción u opciones que desea
personalizar.
1. Presione
,
,
.
Enviar
Envía el mensaje.
2. Oprima
destino.
para introducir la dirección de
Prioridad
Llame al #
Normal / Alto
3. Introduzca el número de teléfono al que desea
enviar el mensaje o página, o la dirección de
correo electrónico para un mensaje de correo
Introduce en el mensaje un número
preprogramado de devolución de
llamada.
Activado / Desactivado / Modific.
electrónico, y luego oprima
.
Noticia de entrega Informa que el mensaje ha sido
entregado exitosamente.
NOTA Para enviar un mensaje de localizador, presione
la Tecla suave izquierda [Enviar].
Mejorado / Activado
Guardar mensaje Guarda el mensaje en la carpeta de
guardados.
4. Presione
5. Escriba su mensaje (de texto o de correo
electrónico) y oprima
6. Oprima la tecla suave izquierda
para ir a la pantalla del mensaje.
4. Concluir y enviar el mensaje.
.
[Enviar].
Uso de los contactos para enviar un mensaje
Aparece un mensaje de confirmación.
Puede designar una entrada guardada en Contactos
como Dirección 1 en lugar de introducir el destino
manualmente.
Personalización de los mensajes con las opciones
1. Crear un mensaje nuevo.
1. Presione
,
,
.
2. Oprima la tecla suave derecha
[Opciones].
2. Oprima la Tecla suave derecha
[Contactos].
34 VX3400
Mensajes
3. Seleccione Contactos / Lista Llam /
4. Oprima la Tecla suave derecha
[Opciones].
Direcciones recientes y presione
.
5. Seleccione la opción u opciones que desea
personalizar.
4. Use
5. Use
para resaltar la entrada del contacto
que contenga el destino y presione
.
Insertar texto rápido Inserta frases predefinidas.
What's up? / Let's meet. / Check
this out! / Whacha doing? / Thanks
/ What do you think? / You've gotta
be here to enjoy this. / Would you
like to join me for a date tonight? /
On my way. / Yes / You're the best!
/ Call me.
resaltar el número telefónico SMS o la
dirección de correo electrónico y presione
.
NOTA Puede introducir hasta 10 direcciones por cada
mensaje.
6. Complete el mensaje según sea necesario.
Insertar objetos Inserta objetos en el mensaje.
Pequeña Img / Grandes Img / Mis
Imágenes / Sonidos / Mi Melodia /
Animaciónes / Mis Animaciónes
Opciones de Texto
Le permite estilizar su mensaje de texto, insertar
Texto rápido e incluir Objetos en su mensaje para
darle un toque personalizado.
Dar formato al texto Le permite cambiar el aspecto del
1. Use
para resaltar Mensaje y presione
.
texto.
Alineación / Tamaño de la fuente /
Estilo de fuente / Color de texto /
Fondo
2. Seleccione el modo de introducción de texto
oprimiendo la tecla suave izquierda
.
Pala. T9 / Abc / 123 / Símbolos / Smiley
Guardar texto rápidoPermite definir frases para
insertarlas como Insert Quick
Texto.
3. Introduzca su mensaje y use la tecla suave
derecha si fuera necesario para agregarle
varios efectos al texto.
VX3400 35
Mensajes
Insertar señal Inserta una firma predefinida.
Advertencia de Memoria Agotada
Costumbre / Mi VCard
Si el mensaje ¡MEMORIA INSUFICIENTE! aparece
en su pantalla, ha llenado la memoria asignada a
mensajes y el teléfono ya no aceptará mensajes
nuevos. Tendrá que borrar algunos de sus
mensajes antiguos para liberar algo de espacio de
memoria.
6. Concluir y enviar o guardar el mensaje.
3. Entrada
El teléfono le avisa de 2 formas cuando recibe un
mensaje nuevo:
Ver su buzón de entrada
●
Se pueden almacenar hasta 50 mensajes recibidos
en la Bandeja de entrada.
Mostrando una notificación de mensaje.
Haciendo sonar una alerta (un pitido u otro
sonido que configure) o vibrando.
●
1. Presione
,
,
.
Los mensajes de texto, páginas y correos
electrónicos recibidos se muestran del más nuevo
al más antiguo. Puede desplazarse por ellos y
seleccionar cualquiera de ellos para ver el
contenido de los mensajes.
2. Use
para resaltar uno mensaje.
●
Presione tecla suave izquierda
Presione tecla suave derecha
[Respond].
●
[Opciones].
Borrar
Borra el mensaje seleccionado
del Buzón de entrada.
NOTA Si recibe el mismo mensaje dos veces, sólo verá
el más reciente y aparecerá "Duplicado" en la parte
superior del mensaje.
Bloquear/Desbloquear Bloquea o desbloquea el
mensaje para evitar o permitir
que se borre.
3. Oprima
para seleccionar el mensaje.
36 VX3400
Mensajes
4. Salida
4. Oprima la tecla suave derecha
[Opciones].
Se pueden almacenar hasta 50 mensajes en el
Buzón de salida. Ver listas y contenidos de los
mensajes enviados y comprobar si la transmisión
fue correcta o no.
Responder w copiar Responde al SMS con el mensaje
original adjunto.
Reenviar
Reenvía un mensaje recibido a
otras direcciones de destino.
1. Presione
,
,
.
2. Use
para resaltar uno mensaje.
Borrar
Borra los mensajes seleccionados.
●
Presione tecla suave izquierda
Presione tecla suave derecha
[Reenviar].
Guardar dirección Almacena en sus Contactos el
número de devolución de
●
[Opciones].
llamada, la dirección de correo
electrónico y los números de los
datos del usuario incluidos en el
mensaje recibido.
Borrar
Borra el mensaje seleccionado.
Bloquear/Desbloquear Bloquea o desbloquea el mensaje
para evitar o permitir que se borre.
Guardar objeto Guarda las imágenes,
animaciones, sonidos, melodías y
objetos de vcard en Mi carpeta y
Contactos permitiéndole usar el
Papel tapiz y el Tono de timbre.
3. Oprima
4. Oprima la tecla suave derecha
Enviado a
Borrar
para seleccionar el mensaje.
[Opciones].
Le permite enviar el mensaje a
otra dirección.
Borra los mensajes seleccionados.
Guardar texto rápido Guarda el mensaje en la lista de
mensajes Grabados.
Guardar mensajes Guarda el mensaje en los
mensajes Guardados del teléfono.
Guardar dirección Almacena en sus Contactos el
número de devolución de llamada,
la dirección de correo electrónico
y los números de los datos del
usuario incluidos en el mensaje
recibido.
Bloquear/Desbloquear Bloquea o desbloquea el mensaje
para evitar o permitir que se
borre.
VX3400 37
Mensajes
Guardar texto rápido Guarda el mensaje en la lista de
mensajes Grabados.
6. Configuraciones de mensaje
Le permite configurar nueve valores para los
mensajes recibidos.
Guardar mensaje Guarda el mensaje del Buzón de
salida en la carpeta de guardados.
Bloquear/Desbloquear Bloquea o desbloquea el mensaje
para evitar o permitir que se
borre.
1. Presione
,
,
.
2. Use
ara resaltar uno de los valores y
para seleccionarlo.
presione
Info de mensaje Muestra la prioridad y estado del
tipo de mensaje.
Auto guardar
Auto guardar / Preguntar / No
guardar
Auto borrar
Llame al #
Correo de voz #
Firma
Activado / Desactivado
5. Guardado
Muestra los mensajes guardados y los borradores
de mensajes.
Ninguno / Costumbre / Mi VCard
Activado / Desactivado
Vista automatica
1. Presione
,
,
.
Modalidad de asentar Pala.T9 / Abc / 123
Texto rápido What's up? / Let's meet. /
2. Use
para resaltar uno mensaje.
Check this out! / Whacha
doing? / Thanks / What do
you think? / You've gotta be
here to enjoy this. / Would
you like to join me for a date
tonight? / On my way. / Yes /
You're the best! / Call me.
●
Presione Tecla suave izquierda
Presione Tecla suave derecha
[Resumir].
●
[Opciones].
Borrar
Borra el mensaje seleccionado.
Bloquear/Desbloquear Bloquea o desbloquea el
mensaje para evitar o permitir
que se borre.
Reporduccion automatica Activado / Desactivado
38 VX3400
Mensajes
6.6 Vista automatica
Descripciones de submenús de configuración
de mensajes
Configura el teléfono para mostrar automáticamente
el contenido de los mensajes recibidos en lugar de
tener que abrir primero el mensaje.
6.1 Auto guardar
Designa si se debe o no guardar una copia de los
mensajes enviados una vez transmitidos.
6.7 Modalidad de asentar
Le permite seleccionar el método de introducción
predeterminado.
6.2 Auto borrar
Designa si se debe o no borrar automáticamente
los mensajes leídos no bloqueados cuando se
llena la memoria del teléfono.
6.8 Texto rápido
Le permite cambiar las frases de texto rápido
preprogramadas e incluso agregar las propias
para hacer rápido y sencillo el envío de mensajes.
6.3 Llame al #
Le permite mostrar directamente el contenido al
recibir un mensaje.
6.9 Reporduccion automatica
La pantalla se desplaza hacia abajo
automáticamente cuando se ven mensajes.
6.4 Correo de voz #
Le permite introducir manualmente el número de
acceso del servicio de correo de voz si la red no
ha proporcionado el número de acceso al SCV.
6.5 Firma
Le permite crear o modificar una firma que se
envíe automáticamente con sus mensajes.
VX3400 39
Media
7. Borrar Todo
Media
Le permite borrar todos los mensajes no bloqueados
de una vez o borrar individualmente la Entrada,
Salida y mensajes Guardado.
El menú Media le permite descargar y usar una
amplia variedad de gráficas, sonidos y otros
medios.
1. Presione
,
,
.
Acceso y Opciones
●
Presione
Entrada para borrar todos los
1. Oprima la tecla suave
mensajes almacenados en el mensajes
Entrada.
izquierda
[Menú].
2. Presione
Media.
●
●
Presione
mensajes almacenados en el mensajes Salida.
Presione Guardado para borrar todos los
Salida para borrar todos los
3. Seleccione un submenú.
1. Pequeña Img
2. Grandes Img
3. Mis Imágenes
4. Sonidos
mensajes almacenados en el mensajes
Guardado.
●
Presione
Todos para borrar todos los
mensajes almacenados en el Entrada, Salida y
mensajes Guardado.
5. Mi Melodia
6. Animaciónes
7. Mis Animaciónes
8. Redactor de Melodia
2. Presione
Borrar Todos.
Aparece un mensaje de confirmación.
40 VX3400
Media
1. Pequeña Img
3. Oprima la tecla suave derecha
[Opciones].
Le permite ver todas las pequeñas imágenes
disponibles que puede insertar en los mensajes de
texto.
Borrar / Rename / Borrar Todos
4. Sonidos
1. Presione
,
,
.
Le permite elegir los tonos de timbre que se escuchan.
2. Grandes Img
Le permite elegir una imagen para mostrarla como
fondo para determinadas funciones del teléfono.
1. Presione
2. Use
,
,
.
para resaltar su selección y oprima
[Fijar]
.
1. Presione
2. Use
,
,
.
Fijar Contactos / Fijar llam.ID / Fijar Sin llam.ID /
Fijar Restringir
para resaltar su selección y oprima
[Fijar]
.
Fijar Contactos / Fijar Papel tapiz / Fijar
Encendido / Fijar Apagado
5. Mi Melodia
Le permite elegir los tonos de timbre que se escuchan.
1. Presione
2. Use
,
,
.
3. Mis Imágenes
Le permite elegir el fondo que se muestra en el
teléfono.
para resaltar su selección y oprima
[Fijar]
.
1. Presione
,
,
.
Fijar Contactos / Fijar llam.ID / Fijar Sin llam.ID /
Fijar Restringir
2. Use
para resaltar su selección y oprima
[Fijar]
.
3. Oprima la tecla suave derecha
[Opciones].
Fijar Contactos / Fijar Papel tapiz / Fijar
Encendido / Fijar Apagado
Borrar / Rename / Borrar Todos
VX3400 41
Media
Guardar / Reproducir / A modo de puntuación
(A modo de teclado) / Estilo de melodia /
Instrumento / Ritmo / Tempo / Insertar una nota /
Restablecer / Ayuda
6. Animaciónes
Le permite ver todas las animaciones disponibles
que demuestran emociones y que puede usar en
los mensajes de correo electrónico y de texto.
1. Presione
,
,
.
NOTA La opción Ayuda le proporciona funciones de
teclas especiales que puede usar al componer melodia.
7. Mis Animaciónes
8.2 Álbum de melodias
1. Presione
,
,
.
Enumera las melodias que creó y guardó en
Componer melodia. La tecla suave derecha
[Opciones] le permite administrar sus melodias.
2. Use
.
para administrar su selección y oprima
NOTA Puede configurar melodías que haya creado y
guardado en el Álbum de melodías como tono de timbre
para Contactos, llam.ID, Sin llam.ID o Restringir.
3. Oprima la tecla suave derecha
[Opciones].
Borrar / Rename / Borrar Todos
8.3 Metrónomo
Le permite mostrar un metrónomo en pantalla y
ajustarlo en Lento, Rápido o Normal.
8. Redactor de Melodia
1. Presione
,
,
.
8.1 Redactar Melodia
Le permite componer melodías en Modo de
teclado o Modo de puntuacón. Oprima la tecla
suave derecha
siguientes:
para controlar las opciones
42 VX3400
Aparato
1. Plan
Aparato
Las herramientas del teléfono incluyen un Plan,
Alarma de reloj, Memo Vocal, Atajo, Nota, Ez
Sugerencia, Calculadora, Reloj universal y Convrtdr
unidad.
El programador le ayuda a mantener una agenda
conveniente fácil de acceso. Simplemente
almacena las horas progromadas y el alerta de
programador le hace saber cuando llega la hora.
1. Presione
2. Use
,
,
.
Acceso y Opciones
para resaltar el día programado.
1. Oprima la tecla suave
Mover el cursor a la izquierda.
Mover el cursor a la derecha.
Mover la semana hacia atrás.
Mover la semana hacia adelante.
izquierda
[Menú].
2. Presione
Aparato.
3. Seleccione un submenú.
1. Plan
2. Alarma de reloj
3. Memo Vocal
4. Atajo
3. Oprima la tecla suave izquierda
[Agregar].
4. Introduzca la información de su calendario
incluyendo:
●
Fecha
5. Nota
●
Hora
6. EZ Sugerencia
7. Calculadora
8. Reloj universal
9. Convrtdr unidad
●
Título o información
Suceso recurrente
●
●
Cuándo hacer sonar la alarma de recordatorio
●
Qué timbre de alarma hacer sonar
5. Oprima la tecla suave izquierda
[Guardar].
VX3400 43
Aparato
NOTA Si el SMS se está enviando durante una llamada
o el acceso UP se esta conectando en la hora establecida,
no suena en este momento sino suena despues de salir.
3. Memo Vocal
Le permite agregar, escuchar y borrar breves
recordatorios verbales.
1. Presione
,
,
.
2. Alarma de reloj
Le permite fijar una de cuatro alarmas. La hora
actual se muestra en la parte superior de la
pantalla cuando selecciona fijar una alarma. A la
hora de la alarma, aparecerá Alarma1 (o 2 o 3,
según sea el caso) en la pantalla de cristal líquido
y sonará la alarma.
2. Oprima la tecla suave izquierda
[Nuevo]
para grabar un nuevo memorándum de voz.
3. Después de que se le pida, diga su memorándum
de voz y oprima la tecla suave izquierda
[Termin.] para terminar la grabación.
4. El título Memorándum de voz asume el valor
1. Presione
,
,
.
predeterminado de la fecha y hora de la grabación.
2. Seleccione la alarma que desea modificar.
●
Oprímalo
para ver la información del
Alarma 1 /
Alarma 2 /
Alarma 3 /
Memorándum de voz seleccionado y poder
escuchar la grabación.
Alarma rápida
3. Introduzca la información de la alarma, que
incluye:
●
Oprima la tecla suave derecha
para lo siguiente:
[Opciones]
●
Activado/Desactivado
Modificar título
Edita el título del
Memorándum de voz.
●
Hora para hacer sonar la alarma
●
Cuándo hacer sonar la alarma
Inf sobre memoria Muestra la información de
memoria usada y restante.
●
Tono de timbre que sonará como alarma
4. Oprima la tecla suave izquierda
[Guardar].
Fijar
Contactos/llam.ID/Sin llam.ID/
Restringir
44 VX3400
Aparato
Borrar
Borrar el Memorándum de voz
seleccionado.
Borrar todo los Memorándums de
voz.
6. EZ Sugerencia
Le permite calcular rápida y fácilmente el importe
de una nota usando como variables con la cantidad
de la nota, la propina y el número de comensales.
Borrar Todo
1. Presione
,
,
.
4. Atajo
Le permite establecer un acceso directo a los
menús del teléfono con la tecla de navegación
derecha abajo.
7. Calculadora
Le permite realizar cálculos matemáticos simples.
Puede introducir números de hasta dos lugares
decimales. Se pueden hacer los cálculos con
hasta 5 líneas a la vez.
1. Presione
,
,
.
Aparece un mensaje explicativo.
2. Seleccione el acceso directo y presione
.
1. Presione
,
,
.
2. Introduzca los números del valor que desea.
5. Nota
●
Oprima la tecla suave izquierda
para cancelar la entrada.
Oprima la tecla suave derecha
[AC]
Le permite agregar, leer, modificar y borrar notas
que haya escrito para usted mismo.
●
[Operador]
1. Presione
2. Presione la tecla suave izquierda
,
,
.
para insertar paréntesis o exponenciales en
su ecuación.
[Agregar] ara escribir una nota nueva.
●
●
Oprima
Oprima
para insertar un decimal.
para insertar .
3. Oprima la tecla suave derecha
cambiar el modo de introducción.
para
3. Use la tecla de navegación para introducir +, -,
x, /, = y completar la ecuación.
4. Después de rellenar la nota, oprima
para
guardarla.
VX3400 45
Aparato
8. Reloj universal
Le permite determinar la hora actual en otro huso
horario o en otro país.
Ambiente
El menú de Ambiente tiene opciones para personalizar
el teléfono.
1. Presione
,
,
.
Acceso y Opciones
NOTA La tecla suave izquierda
Fije DST, de
1. Oprima la tecla suave
verano, ajusta la hora al horario de verano.
izquierda
[Menú].
2. Presione
Ambiente.
9. Convrtdr unidad
3. Seleccione un submenú.
Le permite medir Longitud, Área, Peso, Volumen,
Temperatura y Velocidad.
1. Sonidos
2. Mostrar
3. Sistema
1. Presione
,
,
.
4. Seguridad
5. Funciones
6. Modo Standalone
7. Marcaciones para voz
8. Lugar
9. Info de tel
46 VX3400
Ambiente
1.3 Volumen
Le permite configurar varios valores de volumen.
1. Presione
1 . Sonidos
Opciones para personalizar los sonidos del teléfono.
,
,
,
.
1.1 Timbres
2. Seleccione Timbre / Audífono / Timbre tecla /
Configura tonos para distintos tipos de llamadas
entrantes.
Manos libres.
1. Presione
,
,
,
.
3. Ajuste el volumen con
y después presione
2. Seleccione ID de llamador / Sin ID de llamador /
después para guardar la configuración.n
Restringir.
3. Use
oprima
para seleccionar un timbre y luego
para guardar el sonido.
1.4 Alertas Mensaje
Le permite seleccionar alerta typo nuevo mensaje.
1. Presione
,
,
,
.
1.2 Tono de tecla
2. Seleccione Correo de voz / Texto de mensaje /
Le permite seleccionar el Tono de tecla que se
escuchó al oprimir las teclas.
Correo electrónico / Llamada / Aviso de 2-Min.
3. Elija el valor que desee y oprima
guardar el valor.
para
1. Presione
,
,
,
.
2. Seleccione Timbre / Inglés / Español y oprima
.
Timbre Emite un pitido al oprimir las teclas.
Inglés Emite una voz en Inglés.
Español Emite una voz en Español.
VX3400 47
Ambiente
1.5 Servicio Alertas
1. 5. 5. Volver al principio
Le avisa cuando se desplaza más allá del final de
una lista de menús.
Le permite configurar como Activado o
Desactivado cualquiera de las cuatro opciones de
Aviso.
1. 5. 6. Carga completa
Lo alerta cuando se ha finalizado la carga.
1. Presione
,
,
,
.
2. Seleccione una opción de alerta y oprima
.
1. 5. 7. Entrd accesorio
Lo alerta cuando un accesorio se conecta
correctamente.
3. Configure Activado / Desactivado with
con
y luego oprima
.
1. 5. 1 Cambiar de servicio
Le avisa cuando cambia el servicio. Teléfono
muestra el mensaje Entrando al área de servicio o
Saliendo del área de servicio.
1.6 Tono de activación/desactivación
Le permite configurar el teléfono para que haga
sonar un tono cuando se enciende y apaga.
1. Presione
2. Ajuste como Activado / Desactivado con
oprima
,
,
,
.
1. 5. 2. ERI Sonidos
Le informa del estado del servicio celular.
y
ERI : Enhanced Roaming Indicator.
.
*
1. 5. 3. Señal sonora de un minuto
Le avisa 10 segundos antes del final de cada minuto
durante una llamada.
1. 5. 4. Llamadas Conexión
Le avisa cuando la llamada se ha conectado.
48 VX3400
Ambiente
1.7 Longitud de DTMF
2. Mostrar
Le permite configurar la longitud del Tono de teclas
y la velocidad de reproducción de los tonos de
teclas.
Opciones para personalizar la pantalla del teléfono.
2.1 Pendon
1. Presione
2. Seleccione cualquiera de los siguientes y luego
oprima
,
,
,
.
Le permite introducir una cadena de hasta 16
caracteres que se muestran en la pantalla de
cristal líquido.
.
1. Presione
,
,
,
.
Normal Emite un tono durante un tiempo
determinado, incluso si usted mantiene
presionada la tecla.
2. Introduzca el texto de la pancarta y presione
.
2.2 Iluminación de fondo
Largo Emite un tono continuo durante todo el
tiempo en que usted mantenga oprimida
la tecla.
Le permite configurar la iluminación del teléfono.
Puede configurar cuánto tiempo debe estar
iluminada la pantalla (LCD principal) así como qué
tan brillante, y ajustar durante cuánto tiempo están
iluminadas las teclas (Tiempo de luz de las teclas).
NOTA Frecuencia múltiple de tono dual (DTMF) Señales
mediante la transmisión simultánea de dos tonos, uno de
un grupo de frecuencias bajas y otro de un grupo de
frecuencias altas. Cada grupo consta de cuatro
frecuencias. Si configura la longitud del tono de teclas en
Largo se ampliará el tono DTMF.
1. Presione
2. Elija un submenú.
LCD Principal /
de tecla
3. Seleccione config y presione
Temporizador / Brillo
,
,
,
.
Temporizador de luz
.
VX3400 49
Ambiente
Si se fija una cantidad de tiempo para la opción de
reloj, el tiempo se empieza a contar después de
que se oprime la última tecla.
2. 2. 2. Temporizador de luz de tecla
7 segundos
15 segundos
Siempre encend : significa que la luz trasera
siempre estará encendida mientras esté abierta la
tapa.
NOTA Este valor afectará a su batería. La luz trasera
usa más energía y agotará la batería con más rapidez.
2. 2. 1. LCD Principal
Siempre Apagado : significa que nunca se
enciende la luz trasera.
Temporizador
7 segundos
2.3 Pantallas
Le permite seleccionar el tipo de fondo que se
muestra en el teléfono.
15 segundos
30 segundos
Siempre encend : significa que la luz trasera
siempre estará encendida mientras esté abierta la
tapa.
1. Presione
2. Seleccione Fondo / Encendido / Apagado y
oprima
3. Seleccione entre las distintas pantallas y
oprima
,
,
,
.
Siempre Apagado : significa que nunca se
enciende la luz trasera.
.
Brillo Fija el nivel de brillantez de la luz trasera.
0% / 25% / 50% / 75% / 100%
.
4. Oprima la tecla suave izquierda
.
[Guardar] o
50 VX3400
Ambiente
2.4 Estilo del menú
2.7 Contraste
Le permite establecer el nivel de contraste de su
pantalla de cristal líquido.
Le permite elegir si desea que el menú se muestre
como lista o como iconos.
1. Presione
,
,
,
.
1. Presione
,
,
,
.
2. Seleccione LCD Principal / LCD Delantero, y
oprima
3. Use
2. Seleccione Icono o Lista y oprima
.
.
para ajustar el nivel y oprima
.
2.5 Relojes
Le permite seleccionar el tipo de reloj que se
muestra en el teléfono.
2.8 Fuente
Le permite fijar el tamaño y color de la fuente.
1. Presione
1. Presione
,
,
,
.
,
,
,
.
2. Seleccione Normal / Analógico / Digital y luego
oprima la Tecla suave izquierda
[Guardar] .
2. 8. 1. Dígitos de llamada
1. Seleccione Tamaño / Color y oprima
.
2.6 Colores de tema
Le permite elegir el color de la pantalla de fondo.
1. Presione
2. Seleccione Defecto / Azul brillante / Verde
magn / Púrpura agrad y oprima
2. Presione
hasta que encuentre el tamaño o
color que desea y entonces oprima
guardarlo.
para
,
,
,
.
.
2. 8. 2. Editor de texto
1. Seleccione Tamaño / Color y oprima
.
2. Use
para elegir un ajuste y oprima
.
VX3400 51
Ambiente
2. 8. 3. Menú Fuente
3. Sistema
El menú Sistema le permite designar
configuraciones específicas de red del sistema.
1. Use
oprima
para seleccionar Normal / Grande, y
.
3.1 Seleccione Sistema
2.9 Idioma
Le permite configurar el entorno de administración
del productor del teléfono. Deje esta configuración
como predeterminada a menos que desee alterar
la selección del sistema como se lo haya indicado
su proveedor de servicio.
Le permite configurar el idioma de pantalla del
teléfono.
1. Presione
,
,
,
.
2. Use
oprima
para seleccionar Inglés / Español , y
.
1. Presione
,
,
,
.
2. Seleccionar Sólo Base / Automático A /
Automático B presione
.
2.0 Poder Salvo
Cuando el teléfono está en un área sin servicio,
deja de buscar el servicio y entra en Ahorro de
energía.
3.2 Fijar NAM
Le permite seleccionar el NAM (Módulo de
asignación de número) del teléfono si éste está
registrado con varios proveedores de servicio.
1. Presione
,
,
,
.
2. Selecionar una opcíon presione
.
1. Presione
,
,
,
.
2 minutos / 10 minutos / 30 minutos / Desactivado
2. Seleccionar NAM1 / NAM2 y presione
.
52 VX3400
Ambiente
3.3 Auto NAM
4. Seguridad
Permite que el teléfono cambie automáticamente
entre números telefónicos programados que
correspondan al área del proveedor de servicio.
El menú de Seguridad le permite asegurar
electrónicamente el teléfono.
4.1 Bloq. Teléfono
1. Presione
,
,
,
.
Evita el uso no autorizado de su teléfono. Una vez
que el teléfono está bloqueado, estará en modo
restringido. Puede recibir llamadas y hacer llamadas
de emergencia, pero es necesario introducir el
código de bloqueo para hacer cualquier otra cosa.
Puede modificar el código de bloqueo con Nuevo
código de bloqueo en el menú Seguridad.
2. Seleccionar Activado / Desactivado y presione
.
3.4 Sist.de servicio
Identifica el número de canal de un sistema
atendido y un número SID. Esta información es
sólo para asistencia técnica.
1. Presione
,
,
.
2. Introduzca el código de bloqueo de cuatro
dígitos. El código de bloqueo son habitualmente
las 4 últimas cifras de su número de teléfono.
1. Presione
,
,
,
.
3. Presione
Bloq. Teléfono.
4. Seleccione una opción y oprima
.
Desbloq
Bloq.
El teléfono nunca está bloqueado (se
puede usar el modo de Bloqueo).
El teléfono siempre está. Al estar
bloqueado, puede recibir llamadas
entrantes o hacer sólo llamadas de
emergencia.
VX3400 53
Ambiente
Al encender el teléfono El teléfono está bloqueado al
encenderse.
6. Use
y oprima
para ajustar un nivel de restricciones
.
Configuración de ubicación Configuración de
desbloqueo/Configuración de bloqueo
4.2 Restricciones
Le permite restringir las llamadas que se pueden
marcar desde su teléfono. Las llamadas salientes
sólo pueden hacerse a números de emergencia o
números guardados en sus Contactos, pero usted
todavía podrá recibir todas las llamadas entrantes.
Llamadas
Permitir todo / Sólo contactos /
Bloquear todo
Mensajes
Permitir todo / Bloquear todo
4.3 Emergencia #s
1. Presione
,
,
.
Le permite introducir 3 números de emergencia.
Podrá llamar a estos números de emergencia y al 911
incluso si el teléfono está bloqueado o restringido.
2. Introduzca el código de bloqueo de cuatro
dígitos.
1. Presione
,
,
.
NOTA Cambie el código de bloqueo de la restricción para
hacerlo diferente del código de bloqueo del teléfono.
2. Introduzca el código de bloqueo de cuatro
dígitos.
3. Presione
Restricciones.
3. Presione
Emergencia #s.
4. Introduzca el código NIP de cuatro cifras.
4. Seleccione el número de emergencia y oprima
.
5. Seleccione un menú de restricciones y oprima
.
5. Introduzca un número telefónico de emergencia
y luego presione
.
- Configuración de ubicación
- Llamadas (Llmds entrantes/ salientes)
- Mensajes (Msjs entrantes/ Msjs salientes)
54 VX3400
Ambiente
4.4 Editar códigos
4.6 Restablecer Implícito
Le permite introducir un nuevo código de bloqueo
de cuatro cifras.
Le permite restaurar su teléfono a la configuración
predeterminada de fábrica.
1. Presione
2. Introduzca el código de bloqueo de cuatro dígitos.
3. Presione Editar códigos.
,
,
.
1. Presione
,
,
.
2. Introduzca el código de bloqueo de cuatro
dígitos.
4. Introduzca 4 cifras que desee usar como su
Código de bloqueo.
3. Presione
Restablecer Implícito.
4. Presione
.
, seleccione Revertir y presione
5. Introduzca las mismas 4 cifras para confirmar
su nuevo código de bloqueo.
4.5 Borrar Contactos
Le permite borrar todos sus Contactos de una sola
vez.
1. Presione
2. Introduzca el código de bloqueo de cuatro dígitos.
3. Presione Borrar Contactos.
4. Seleccione Borrar todos los #s y presione
,
,
.
.
VX3400 55
Ambiente
5.3 Auto Respuesta automát
5. Funciones
El menú de Configuración de llamadas le permite
decidir cómo maneja el teléfono las llamadas de
entrada y de salida.
Le permite configurar el teléfono para contestar
llamadas automáticamente al estar conectado a
un dispositivo de manos libres.
NOTA Respuesta automática es una función independiente
del teléfono que debe activarse o desactivarse manualmente
al estar conectado o desconectado de un dispositivo de
manos libres.
5.1 Reintento Automático
Le permite fijar el tiempo que el teléfono esperará
antes de remarcar automáticamente un número
cuando no se consiga una llamada que se intentó.
1. Presione
,
,
,
.
1. Presione
,
,
,
.
2. Seleccione una opción y oprima
Desactivado
.
2. Seleccione Desactivado / Cada 10 segundos /
Cada 30 segundos / Cada 60 segundos y oprima
Después 5 seg Cuando tenga una llamada
entrante, el teléfono responde
.
automáticamente después de 5
timbres, esté abierto o cerrado.
5.2 Respuesta de llamada
Le permite determinar cómo iniciar una llamada
contestada.
5.4 Marcaciones de un toque
Le permite usar la función Marcado rápido
(manteniendo oprimida la cifra de marcado rápido).
1. Presione
,
,
,
.
2. Seleccione Abrir / Cualquier tecla / Sólo SEND
Si se fija en Deshabilitado, los números de
Marcado rápido designados en sus Contactos no
funcionarán.
y oprima
.
1. Presione
,
,
,
.
2. Seleccione Habilitar / Inhabilitado y oprima
.
56 VX3400
Ambiente
5.5 Privacidad de voz
5.7 Modalidad TTY
Le permite configurar la función de privacidad de
voz para las llamadas CDMA. CDMA ofrece una
privacidad de voz inherente. Pregunte sobre su
disponibilidad con su proveedor de servicios.
Le permite conectar un dispositivo TTY (teclado
para personas con problemas de audición) para
comunicarse con personas que también lo usen.
Un teléfono con compatibilidad TTY puede traducir
caracteres escritos a voz. La voz también puede
traducirse en caracteres y mostrarse en el TTY.
1. Presione
,
,
,
.
2. Seleccione Mejorado / Normal y oprima
.
1. Presione
,
,
,
.
Aparece un mensaje de explicación.
5.6 Auto Volumen
2. Presione
para continuar.
Ofrece una mejor experiencia de audio permitiendo
que la función Volumen automático controle el
rango dinámico y el volumen de las voces de
transmisión y recepción a través de distintos
niveles de altavoz y entornos.
3. Seleccione TTY Llena / TTY + Charla / TTY + Oír /
TTY Apagada y oprima
.
TTY Llena Los usuarios que no pueden hablar ni oír
envían y reciben mensajes de texto por
medio de un equipo de TTY.
1. Presione
,
,
,
.
TTY + Charla Los usuarios que pueden hablar pero no oír
reciben un mensaje de texto y envían voz
por medio de un equipo de TTY.
2. Seleccione Activado / Desactivado y oprima
.
TTY + Oír
Los usuarios que pueden oír pero no hablar
envían un mensaje de texto y reciben voz
por medio de un equipo de TTY.
TTY Apagada Los usuarios normales envían y reciben sin
tener equipo TTY.
VX3400 57
Ambiente
Conexión de un equipo TTY y un terminal
Modo de
Al establecer
1. Conecte un cable de TTY a la conexión TTY del
terminal. (Conexión TTY situada en el mismo
sito que el conector para audífonos de manos
libres)
Menú Usuario Función Transmisión y comunicación con un
recepción
terminal normal
Para la
transmisión a
personas con
problemas de
audición o
habla
de mensajes de
TTY
Llena
2. Entre al menú del teléfono y ajuste el modo de
TTY deseado. (Para determinar un modo de TTY,
consulte la tabla)
texto, recepción de Se requiere de un operador
mensajes de texto
3. Después de establecer un modo de TTY,
compruebe la pantalla de LCD del teléfono para
confirmar que esté presente el icono de TTY.
Para las
personas
con
problemas
de audición
transmisión de
con voz voz, recepción de Se requiere de un operador
mensajes de texto
TTY+Charla
4. Conecte el equipo de TTY a la fuente de
alimentación y enciéndalo.
Para las
personas
con
problemas
del habla
transmisión de
mensajes de
5. Haga una conexión de teléfono al número
deseado.
audible
TTY+Oír
Se requiere de un operador
texto, recepción
de voz
6. Al establecerse la conexión, use el equipo TTY
para escribir y enviar un mensaje de texto o
enviar voz.
Para
usuarios
normales
transmisión de
voz, recepción de
voz
TTY
Apagada
7. El mensaje de voz o de texto del lado del
destinatario se muestra en la pantalla del
equipo TTY.
58 VX3400
Ambiente
2. Seleccione Presión tecla / Abrir / Inhabilitado y
6. Modo Standalone
Le permite usar determinadas funciones y
oprima
.
características del teléfono (pero no llamadas ni
acceso a la Web) en áreas donde está restringida
la transmisión por radio. El Modo Independiente
que activa inhabilitará todas las comunicaciones
sin hilos según lo observado en la negación en el
teléfono. Cuando está en Modo independiente, se
suspenderán los servicios que admiten la función
Ubicación activada (como Chaperone).
7.2 Palabras de aprendizaje
Le permite entrenar al teléfono para que reconozca
su voz.
1. Presione
,
,
,
.
2. Seleccione Sí / No y oprima
.
3. Seleccione Aprendizaje / Desentrenar y oprima
.
.
1. Presione
,
,
2. Lea el mensaje y oprima
para continuar.
8. Lugar
Menú para modo GPS (Sistema de
3. Seleccione Activado / Desactivado y oprima
.
posicionamiento global: Sistema de información de
ubicación asistido por satélite).
7. Marcaciones para voz
Le proporciona acceso a los servicios de voz de su
teléfono.
1. Presione
2. Seleccione Ubicación Activada / Sólo E911 y
oprima
,
,
.
.
7.1 Indicador de marcado por voz
NOTA Las señales de satélite GPS no siempre se
transmiten, especialmente si hay malas condiciones
atmosféricas o ambientales, bajo techo y en otros casos.
Le permite configurar el aviso de Marcado por voz.
1. Presione
,
,
,
.
VX3400 59
Ambiente
NOTA Cuando está en Modo independiente, se
suspenderán los servicios que admiten la función Ubicación
activada (como Chaperone).
9.4 Ayuda de acceso directo
Le permite ver información resumida sobre el uso
del teléfono.
1. Presione
,
,
,
.
9. Info de tel
Le da información concreta respecto al modelo del
teléfono.
9.1 Mi # de tel
Le permite ver su número de teléfono.
1. Presione
,
,
,
.
9.2 S/W Versión
Le permite ver la versión del S/W, PRL (Lista de
roaming preferido), ERI.
1. Presione
,
,
,
.
9.3 Glosario de iconos
Le permite ver todos los iconos y sus significados.
1. Presione
,
,
,
.
60 VX3400
Seguridad
Cuidado de la antena
Información de seguridad de la TIA
Utilice solamente la antena incluida o una antena de reemplazo
aprobada. Las antenas, modificaciones o accesorios no autorizados
pueden dañar el teléfono y violar los reglamentos de la FCC.
Lo que sigue es la Información completa de seguridad de la TIA
(Asociación de la industria de las telecomunicaciones) sobre
teléfonos inalámbricos de mano.
Funcionamiento del teléfono
Exposición a las señales de radiofrecuencia
POSICIÓN NORMAL: Sostenga el teléfono como cualquier otro teléfono
con la antena apuntando hacia arriba por sobre su hombro.
Su teléfono celular de mano inalámbrico es un transmisor y receptor de
radio de baja potencia. Cuando está encendido, recibe y también envía
señales de Radio Frecuencia (RF).
Sugerencias para un funcionamiento más eficiente
En agosto de 1996, la Comisión Federal de Comunicaciones (FCC) de
EE.UU. adoptó lineamientos de exposición a RF con niveles de
seguridad para teléfonos inalámbricos de mano. Esos lineamientos
corresponden a la norma de seguridad establecida previamente por
organismos de estándares tanto de EE.UU. como internacionales:
Para que su teléfono funcione con la máxima eficiencia:
No toque la antena innecesariamente cuando esté usando el teléfono.
El contacto con la antena afecta la calidad de la llamada y puede
ocasionar que el teléfono funcione a un nivel de potencia mayor que el
que necesitaría de otro modo.
ANSI C95.1 (1992) *
NCRP Report 86 (1986)
ICNIRP (1996)
Instituto de estándares nacional estadounidense, Consejo nacional de
protección contra la radiación y mediciones, Comisión internacional de
protección de radiación no ionizante Estos estándares se basaron en
evaluaciones amplias y periódicas de la literatura científica relevante.
Por ejemplo, más de 120 científicos, ingenieros y médicos de
universidades, dependencias gubernamentales de salud y de la
industria revisaron las investigaciones realizadas para desarrollar el
estándar ANSI (C95.1).
Manejo
Compruebe las leyes y reglamentos referidos al uso de teléfonos
inalámbricos en las áreas donde usted maneja y cúmplalas siempre.
Igualmente, si va a usar el teléfono mientras maneja, por favor tenga
presente lo siguiente:
●
Preste toda su atención a conducir: manejar con seguridad es su
primera responsabilidad.
●
Use la operación a manos libres, si la tiene.
●
Salga del camino y estaciónese antes de hacer o recibir una
llamada si las condiciones de manejo o la ley así lo demandan.
El diseño de su teléfono cumple los lineamientos de la FCC (y esas
normas internacionales).
VX3400 61
Seguridad
Dispositivos Electrónicos
Otros dispositivos médicos
La mayoría del equipo electrónico moderno está blindado contra las
señales de RF. Sin embargo, algunos equipos electrónicos pueden no
estar blindados contra las señales de RF de su teléfono inalámbrico.
Si usa cualquier otro dispositivo médico personal, consulte al fabricante
de dicho dispositivo para saber si está adecuadamente blindado contra
la energía de RF externa. Su médico puede ayudarle a obtener esta
información.
Marcapasos
Centros de atención médica
La Asociación de fabricantes de la industria médica recomienda una
separación mínima de quince (15) centímetros o seis (6) pulgadas entre
el teléfono inalámbrico de mano y un marcapasos para evitar la posible
interferencia con éste. Estas recomendaciones son coherentes con las
investigaciones independientes y las recomendaciones de
Investigación en tecnología inalámbrica.
Apague el teléfono cuando esté en instalaciones de atención médica
en las que haya letreros que así lo indiquen. Los hospitales o las
instalaciones de atención médica pueden emplear equipos que podrían
ser sensible a la energía de RF externa.
Vehículos
Las personas con marcapasos:
●
Las señales de RF pueden afectar a los sistemas electrónicos mal
instalados o blindados de manera inadecuada en los vehículos
automotores. Pregunte al fabricante o a su representante respecto de
su vehículo. También debe consultar al fabricante de cualquier equipo
que haya añadido a su vehículo.
Deben SIEMPRE mantener el teléfono a más de quince centímetros
(seis pulgadas) del marcapasos cuando el teléfono esté encendido.
No deben llevar el teléfono en un bolsillo del pecho.
Deben usar la oreja opuesta al marcapasos para reducir al mínimo
la posibilidad de interferencia.
●
●
●
Deben apagar el teléfono de inmediato si tienen motivo para
sospechar que está ocurriendo una interferencia.
Instalaciones con letreros
Apague el teléfono en cualquier instalación donde así lo exijan los
letreros de aviso.
Aparatos para la sordera
Algunos teléfonos inalámbricos digitales pueden interferir con algunos
aparatos para la sordera. En caso de presentarse tal interferencia, es
recomendable que consulte con su proveedor de servicio (o llame a la
línea de servicio al cliente para comentar las opciones a su alcance).
Aeronaves
Los reglamentos de la FCC prohíben el uso del teléfono en el aire.
Apague el teléfono antes de abordar una aeronave.
62 VX3400
Áreas de explosivos
Información de seguridad
Lea y atienda la información siguiente para el uso seguro y adecuado de
su teléfono y para evitar cualquier daño. Igualmente, mantenga la guía
del usuario en un sitio accesible en todo momento después de leerla.
Para evitar la interferencia en zonas donde se realicen explosiones,
apague el teléfono cuando esté en estos sitios o en áreas con letreros
que indiquen: “apague los radios de dos vías”. Obedezca todos los
letreros e instrucciones.
No seguir las instrucciones puede ocasionar daños
Atmósfera potencialmente explosiva
leves o graves al producto
.
Apague el teléfono cuando esté en un área con una atmósfera
potencialmente explosiva y obedezca todos los letreros e instrucciones.
Las chispas en dichas áreas pueden causar una explosión o un
incendio que den como resultado lesiones personales o incluso la
muerte. Las áreas con una atmósfera potencialmente explosiva están
claramente marcadas con frecuencia, pero no siempre. Entre las áreas
potenciales tenemos: las áreas de abastecimiento de combustible
(como las gasolineras), bajo cubierta en barcos, instalaciones de
almacenamiento o transferencia de combustible o sustancias químicas,
vehículos que usen gas de petróleo licuado (como propano o butano),
áreas en las que el aire contenga sustancias químicas o partículas
(como granos, polvo o polvo metálico) y cualquier otra área en la que
normalmente sería recomendable que apagara el motor de su vehículo.
Seguridad del cargador y del adaptador
●
El cargador y el adaptador stán diseñados sólo para ser usados bajo
techo.
●
●
●
Intro duzca el cargador de baterías verticalmente en el
enchufe eléctrico de pared.
Use el adaptador correcto para su teléfono al usar el
cargador de baterías en el extranjero.
Únicamente use el cargador de baterías aprobado. En caso
contrario, esto podría dar como resultado graves daños al
teléfono.
Información y cuidado de la batería
●
Deshágase de la batería correctamente o llévela con su proveedor
de servicios inalábricos para que sea reciclada.
Para vehículos equipados con bolsas de aire
●
La batería no necesita estar totalmente descargada para cargarse.
Una bolsa de aire se infla con gran fuerza. NO coloque objetos, incluido
el equipo inalámbrico, ya sea instalado o portátil, en el área que está
sobre la bolsa de aire o en el área donde se despliega. Si el equipo
inalámbrico del interior del vehículo está mal instalado y se infla la
bolsa de aire, pueden producirse graves lesiones.
●
Use únicamente cargadores aprobados por LG que sean
específicamente para el modelo de su teléfono, ya que están
diseñados para maximizar la vida útil de la batería.
●
No desarme la batería ni le provoque un corto circuito.
VX3400 63
Seguridad
●
●
●
Mantenga limpios los contactos de metal de la batería.
No le provoque un corto circuito a la batería. Los artículos metálicos
como monedas, clips o plumas en el bolsillo o bolso pueden
provocar al moverse un cortocircuito en los terminales + y – de la
batería (las tiras de metal de la batería). El cortocircuito de los
terminales puede dañar la batería y ocasionar una explosión.
Reemplace la batería cuando ya no tenga un desempeño aceptable.
La batería puede recargarse varios cientos de veces antes de
necesitar ser reemplazada.
Cargue la batería después de períodos prolongados sin usar el
teléfono para maximizar la vida útil de la misma.
La vida útil de la batería será distinta en función de los patrones de
uso y las condiciones medioambientales.
El uso extendido de la luz de fondo, y de los kits de conectividad de
datos afectan la vida útil de la batería y los tiempos de conversación
y espera.
●
●
●
Aviso general
●
El uso de una batería dañada o el introducir la batería en la boca
pueden causar gravs lesiones.
No coloque cerca del teléfono artículos que contengan
componentes magnéticos como serían tarjetas de crédito, tarjetas
telefónicas, libretas de banco o boletos del metro. El magnetismo del
teléfono puede dañar los datos almacenados en la tira magnética.
Hablar por el teléfono durante un período de tiempo prolongado
puede reducir la calidad de la llamada debido al calor generado
durante la utilización.
●
●
La función de autoprotección de la interrumpe la alimentación del
teléfono cuando su operación esté en un estado anormal. En este
caso, extraiga la batería del teléfono, vuelva a instalarla y encienda
el teléfono.
●
●
●
●
Cuando el teléfono no se use durante mucho tiempo, almacénelo en
un lugar seguro con el cable de alimentación desconectado.
El uso del teléfono cerca de equipo receptor (como un televisor o
radio) puede causar interferencia el teléfono.
No use el teléfono si la antena está dañada. Si una antena dañada toca
la piel, puede causar una ligera quemadura. Comuníquese con un Centro
de servicio autorizado LG para que reemplacen la antena dañada.
No sumerja el teléfono en agua. Si esto ocurre, apáguelo de
inmediato y extraiga la batería. Si el teléfono no funciona, llévelo a
un Centro de servicio autorizado LG.
Peligros de explosión, descargas eléctricas e incendio
●
No coloque el teléfono en sitios espuestos a exceso de polvo y
mantenga la distancia mínima requerida entre el cable de
alimentación y las fuentes de calor.
Desconecte el cable de alimentación antes de limpiar el teléfono, y
limpie la clavija de alimentación cuando esté sucia.
●
●
Al usar la clavija de alimentación, asegúrese de que esté conectada
●
firmemente. En caso contrario, puede provocar calor excesivo o
incendio.
●
Si coloca el teléfono en un bolsillo o bolso sin cubrir el receptáculo
●
●
No pinte el teléfono.
Los datos guardados en el teléfono se pueden borrar debido a un
uso descuidado, reparación del teléfono o actualización del
(clavija de alimentación), los artículos metálicos (tales como una
moneda, clip o pluma) pueden provocarle un corto circuito al
teléfono. Siembre cubra el receptáculo cuando no se esté usando.
64 VX3400
pruebas de que los teléfonos inalámbricos sean totalmente seguros. Los
teléfonos inalámbricos emiten bajos niveles de energía de Radio Frecuencia
(RF) en el rango de microondas cuando se usan. También emiten muy bajos
niveles de RF cuando están en modo de espera. Mientras que altos niveles
de RF pueden producir efectos en la salud (calentando los tejidos), la
exposición a RF de bajo nivel no produce efectos de calentamiento y no
causa efectos conocidos adversos para la salud. Muchos estudios sobre la
exposición a RF de bajo nivel no han encontrado ningún efecto biológico.
Algunos estudios han sugerido que puede haber algunos efectos biológicos,
pero tales conclusiones no se han visto confirmadas por investigaciones
adicionales. En algunos casos, los investigadores han tenido dificultades en
reproducir tales estudios o en determinar el motivo de las inconsistencias en
los resultados.
software. Por favor respalde sus números de teléfono importantes.
El fabricante no es responsable de daños debidos a la pérdida de
datos.
Al usar el teléfono en lugares públicos, fije el tono de timbre en
vibración para no molestar a otras personas.
●
●
●
No apague o encienda el teléfono cuando se lo ponga al oído.
Use los accesorios (especialmente los micrófonos) con cuidado y
asegúrese de que los cables están protegidos y no están en
contacto con la antena innecesariamente.
Cuando escuche música, asegúrese de hacerlo a un volumen moderado
que le permita oir lo que ocurre a su alrededor, especialmente si, por
ejemplo, va a curzar una calle.
Daños en su odio
Si escucha música a elevado volumen durante periodos prolongados,
podría producirse daños en el oido Por ello, le recomendamos no
encender/apagar el terminal cuando esté cerca del odio, así como
mantener siempre volúmenes razonables cuando escuche música o
hable por teléfono.
2. ¿Cuál es el papel de la FDA en cuanto a que los teléfonos inalámbricos
sean seguros?
Según las leyes, la FDA no comprueba la seguridad de los productos para el
consumidor que emitan radiación antes de que puedan venderse, como sí lo
hace con los nuevos medicamentos o dispositivos médicos. No obstante, la
agencia tiene autoridad para emprender acciones si se demuestra que los
teléfonos inalámbricos emiten energía de Radio Frecuencia (RF) a un nivel
que sea peligroso para el usuario. En tal caso, la FDA podría exigir a los
fabricantes de teléfonos inalámbricos que informaran a los usuarios del
riesgo para la salud y reparar, reemplazar o sacar del mercado los teléfonos
de modo que deje de existir el riesgo. Aunque los datos científicos existentes
no justifican que la FDA emprenda acciones reglamentarias, la agencia ha
instado a la industria de los teléfonos inalámbricos para que dé
Actualización de la FDA para los consumidores
Actualización para consumidores sobre teléfonos móviles
del Centro de dispositivos y salud radiológica de la
Administración de alimentos y medicamentos de EE.UU.:
1. ¿Representan un riesgo para la salud los teléfonos inalámbricos?
La evidencia científica disponible no muestra que haya ningún problema de
salud asociado con el uso de teléfonos inalámbricos. Sin embargo, no hay
determinados pasos, entre ellos los siguientes:
VX3400 65
Seguridad
●
●
Apoyar la investigación necesaria sobre los posibles efectos biológicos
de las radiofrecuencias del tipo que emiten los teléfonos inalámbricos.
Diseñar teléfonos inalámbricos de tal modo que se minimice la
exposición del usuario a RF que no sea necesaria para la función del
dispositivo.
Cooperar para dar a los usuarios de teléfonos inalámbricos la mejor
información sobre los posibles efectos del uso de los teléfonos
inalámbricos sobre la salud humana.
seguridad de los teléfonos inalámbricos. La FCC también regula las
estaciones de base de las cuales dependen los teléfonos inalámbricos.
Mientras que estas estaciones de base funcionan a una potencia mayor que
los teléfonos inalámbricos mismos, la exposición a RF que recibe la gente de
estas estaciones de base es habitualmente miles de veces menor de la que
pueden tener procedente de los teléfonos inalámbricos. Las estaciones de
base, por tanto no están sujetas a las cuestiones de seguridad que se
analizan en este documento.
●
La FDA pertenece a un grupo de trabajo interinstitucional de dependencias
federales que tienen responsabilidad en distintos aspectos de la seguridad
de la RF para garantizar la coordinación de esfuerzos a nivel federal. Las
siguientes instituciones pertenecen a este grupo de trabajo:
3. ¿Qué tipos de teléfonos son el tema de esta actualización?
El término “teléfonos inalámbricos” se refiere a los teléfonos inalámbricos
de mano con antenas interconstruidas, con frecuencia llamados teléfonos
“celulares”, “móviles” o “PCS”. Estos tipos de teléfonos inalámbricos
pueden exponer al usuario a una energía de Radio Frecuencia (RF)
mensurable debido a la corta distancia entre el teléfono y la cabeza del
usuario. Estas exposiciones a RF están limitadas por los lineamientos de
seguridad de la FCC que se desarrollaron con indicaciones de la FDA y otras
dependencias federales de salud y seguridad. Cuando el teléfono se
encuentra a distancias mayores del usuario, la exposición a RF es
drásticamente menor, porque la exposición a RF de una persona disminuye
rápidamente al incrementarse la distancia de la fuente. Los así llamados
"teléfonos inalámbricos" que tienen una unidad de base conectada al
cableado telefónico de una casa habitualmente funcionan a niveles de
potencia mucho menores y por tanto producen exposiciones a RF que están
muy por debajo de los límites de seguridad de la FCC.
●
National Institute for Occupational Safety and Health (Instituto nacional
para la seguridad y salud laborales)
●
●
●
Environmental Protection Agency (Agencia de protección
medioambiental)
Occupational Safety and Health Administration (Administración de la
seguridad y salud laborales)
National Telecommunications and Information Administration
(Administración nacional de telecomunicaciones e información)
El National Institutes of Health también participa en algunas actividades del
grupo de trabajo interinstitucional.
La FDA comparte las responsabilidades reglamentarias sobre los teléfonos
inalámbricos con la Comisión Federal de Comunicaciones (FCC). Todos los
teléfonos que se venden en EE.UU. deben cumplir con los lineamientos de
seguridad de la FCC que limitan la exposición a radiofrecuencias. La FCC
depende de la FDA y de otras instituciones de salud para las cuestiones de
66 VX3400
4. ¿Cuáles son los resultados de la investigación que ya se ha realizado?
5. ¿Qué investigaciones se necesitan para decidir si la exposición a RF de
los teléfonos inalámbricos representa un riesgo para la salud?
La investigación realizada hasta la fecha ha producido resultados
contradictorios y muchos estudios han sufrido de fallas en sus métodos de
investigación. Los experimentos con animales que investigan los efectos de
la exposición a las energías de Radio Frecuencia (RF) características de los
teléfonos inalámbricos han producido resultados contradictorios que con
frecuencia no pueden repetirse en otros laboratorios. Algunos estudios con
animales, sin embargo, sugieren que bajos niveles de RF podrían acelerar el
desarrollo del cáncer en animales de laboratorio. Sin embargo, muchos de
los estudios que mostraron un desarrollo de tumores aumentado usaron
animales que habían sido alterados genéticamente o tratados con
sustancias químicas causantes de cáncer de modo que estuvieran
predispuestos a desarrollar cáncer aún sin la presencia de una exposición a
RF. Otros estudios expusieron a los animales a RF durante períodos de hasta
22 horas al día. Estas condiciones no se asemejan a las condiciones bajo las
cuales la gente usa los teléfonos inalámbricos, de modo que no sabemos
con certeza qué significan los resultados de dichos estudios para la salud
humana. Tres grandes estudios epidemiológicos se han publicado desde
diciembre de 2000. Entre ellos, los estudios investigaron cualquier posible
asociación entre el uso de teléfonos inalámbricos y el cáncer primario del
cerebro, glioma, meningioma, o neuroma acústico, tumores del cerebro o de
la glándula salival, leucemia u otros tipos de cáncer. Ninguno de los estudios
demostró la existencia de ningún efecto dañino para la salud originado en la
exposición a RF de los teléfonos inalámbricos. No obstante, ninguno de los
estudios puede responder a preguntas sobre la exposición a largo plazo, ya
que el período promedio de uso del teléfono en estos estudios fue de
alrededor de tres años.
Una combinación de estudios de laboratorio y estudios epidemiológicos de
gente que utiliza teléfonos inalámbricos efectivamente proporcionaría
algunos de los datos necesarios. Dentro de algunos años se podrán realizar
estudios de exposición animal durante toda la vida. Sin embargo, se
necesitarían grandes cantidades de animales para proporcionar pruebas
confiables de un efecto promotor del cáncer, si existiera. Los estudios
epidemiológicos pueden proporcionar datos directamente aplicables a
poblaciones humanas, pero puede ser necesario un seguimiento de 10 años
o más para proporcionar respuestas acerca de algunos efectos sobre la
salud, como lo sería el cáncer. Esto se debe a que al intervalo entre el
momento de la exposición a un agente cancerígeno y el momento en que se
desarrollan los tumores, en caso de hacerlo, puede ser de muchos, muchos
años. La interpretación de los estudios epidemiológicos se ve entorpecida
por la dificultad de medir la exposición real a RF durante el uso cotidiano de
los teléfonos inalámbricos. Muchos factores afectan esta medición, como el
ángulo al que se sostiene el teléfono, o el modelo de teléfono que se usa.
6. ¿Qué está haciendo la FDA para averiguar más acerca de los posibles
efectos en la salud de la RF de los teléfonos inalámbricos?
La FDA está trabajando con el U.S. National Toxicology Program (Programa
nacional de toxicología de EE.UU.) y con grupos de investigadores en todo el
mundo para asegurarse de que se lleven a cabo estudios de alta prioridad
con animales para ocuparse de importantes preguntas referentes a los
efectos de la exposición a la energía de Radio Frecuencia (RF). La FDA ha
sido un participante líder en el Proyecto de campos electromagnéticos
(EMF) internacional de la Organización Mundial de la Salud desde su origen
VX3400 67
Seguridad
en 1996. Un importante resultado de este trabajo ha sido el desarrollo de una
agenda detallada de necesidades de investigación que ha impulsado el
establecimiento de nuevos programas de investigación por todo el mundo. El
proyecto también ha ayudado a desarrollar una serie de documentos de
información pública sobre temas de EMF. La FDA y la Asociación de
Telecomunicaciones e Internet Celular (CTIA) tienen un Acuerdo de
investigación y desarrollo en colaboración (CRADA) formal para realizar
investigaciones sobre la seguridad de los teléfonos inalámbricos. La FDA
proporciona la supervisión científica, recibiendo informes de expertos de
organizaciones gubernamentales, de la industria y académicas. La
investigación patrocinada por la CTIA se realiza por medio de contratos con
investigadores independientes. La investigación inicial incluirá tanto estudios
de laboratorio como estudios de los usuarios de teléfonos inalámbricos. El
CRADA también incluirá una amplia evaluación de las necesidades de
investigación adicionales en el contexto de los más recientes desarrollos de
investigación del mundo.
Electronic Engineering, IEEE) y el Consejo nacional para la protección y
medición de la radiación (National Council on Radiation Protection and
Measurement). El límite de exposición toma en consideración la capacidad
del cuerpo de eliminar el calor de los tejidos que absorben energía de los
teléfonos inalámbricos y se ha fijado muy por debajo de los niveles que se
sabe que tienen algún efecto. Los fabricantes de teléfonos inalámbricos
deben informar a la FCC del nivel de exposición a RF de cada modelo de
teléfono.
El sitio Web de la FCC (http://www. fcc.gov/oet/rfsafety) ofrece direcciones
para ubicar el número de certificación de la FCC en su teléfono de modo que
puede encontrar el nivel de exposición de RF de su teléfono en la lista que
aparece en línea.
8. ¿Qué ha hecho la FDA para medir la energía de radiofrecuencia que
proviene de los teléfonos inalámbricos?
El Instituto de Ingenieros en Electrónica y Electricidad (IEEE) está
desarrollando un estándar técnico para la medición de la exposición a
energía de Radio Frecuencia (RF) proveniente de los teléfonos inalámbricos
y otros dispositivos inalámbricos con la participación y el liderazgo de
científicos e ingenieros de la FDA. El estándar denominado “Práctica
recomendada para determinar la Tasa de absorción específica (SAR) pico
espacial en el cuerpo humano debida a los dispositivos de comunicación
inalámbrica: técnicas experimentales” establece la primera metodología
consistente de pruebas para medir la tasa a la cual se deposita la RF en la
cabeza de los usuarios de teléfonos inalámbricos. El método de prueba
utiliza un modelo de la cabeza humana que simula sus tejidos. Se espera que
la metodología de pruebas de SAR estandarizada mejore notablemente la
consistencia de las mediciones realizadas en distintos laboratorios con el
7. ¿Cómo puedo averiguar cuánta exposición a energía de radiofrecuencia
puedo recibir al usar mi teléfono inalámbrico?
Todos los teléfonos que se venden en Estados Unidos deben cumplir con los
lineamientos de la Comisión Federal de Comunicaciones (FCC) que limitan
las exposiciones a la energía de Radio Frecuencia (RF). La FCC estableció
esos lineamientos asesorada por la FDA y otras dependencias federales de
salud y seguridad. El límite de la FCC para exposición a RF de teléfonos
inalámbricos se ha fijado a una Tasa de absorción específica (Specific
Absorption Rate, SAR) de 1.6 watts por kilogramo (1.6 W/kg). El límite de la
FCC es consistente con los estándares de seguridad desarrollados por el
Instituto de ingeniería eléctrica y electrónica (Institute of Electrical and
68 VX3400
mismo teléfono. La SAR es la medición de la cantidad de energía que
absorben los tejidos, ya sea de todo el cuerpo o de una pequeña parte de él.
Se mide en watts/kg (o miliwatts/g) de materia. Esta medición se emplea
para determinar si un teléfono inalámbrico cumple con los lineamientos de
seguridad.
la exposición a la energía de Radio Frecuencia (RF), las medidas arriba
indicadas se aplicarían a niños y adolescentes que usen teléfonos
inalámbricos. La reducción del tiempo de uso de teléfonos inalámbricos y
aumentar la distancia entre el usuario y la fuente de RF disminuirá la
exposición a RF. Algunos grupos patrocinados por otros gobiernos han
aconsejado que se desaliente el uso de teléfonos inalámbricos del todo para
los niños. Por ejemplo, el gobierno del Reino Unido distribuyó volantes con
una recomendación similar en diciembre de 2000. Señalaron que no hay
pruebas de que el uso de teléfonos inalámbricos cause tumores cerebrales
u otros efectos dañinos. Su recomendación para que se limitara el uso de
teléfonos inalámbricos por parte de los niños era estrictamente precautoria,
no estaba basada en ninguna evidencia científica de que exista ningún
riesgo para la salud.
9. ¿Qué pasos puedo dar para reducir mi exposición a la energía de
radiofrecuencia de mi teléfono inalámbrico?
Si estos productos presentan un riesgo, cosa que en este momento no
sabemos que ocurra, es probablemente muy pequeño. Pero si le preocupa
evitar incluso los riesgos potenciales, puede tomar en cuenta estos consejos
sencillos para reducir al mínimo su exposición a la energía de Radio
Frecuencia (RF). Dado que el tiempo es un factor clave en la cantidad de
exposición que una persona puede recibir, la reducción del tiempo dedicado
al uso de teléfonos inalámbricos reducirá la exposición a RF. Si debe
mantener conversaciones prolongadas con teléfonos inalámbricos todos los
días, puede aumentar la distancia entre su cuerpo y la fuente de la RF, dado
que el nivel de exposición cae drásticamente con la distancia. Por ejemplo,
podría usar un auricular y llevar el teléfono inalámbrico lejos del cuerpo o
usar teléfonos inalámbricos conectados a una antena remota. Reiteramos
que los datos científicos no demuestran que los teléfonos inalámbricos sean
dañinos. Pero si le preocupa la exposición a RF de estos productos, puede
usar medidas como las descritas arriba para reducir su exposición a RF
producto del uso de teléfonos inalámbricos.
11. ¿Qué hay de la interferencia de los teléfonos inalámbricos con el equipo
médico?
La energía de Radio Frecuencia (RF) de los teléfonos inalámbricos puede
interactuar con algunos dispositivos electrónicos. Por este motivo, la FDA
ayudó al desarrollo de un método de prueba detallado para Medir la
Interferencia Electromagnética (EMI) de los teléfonos inalámbricos en los
marcapasos implantados y los desfibriladores. El método de prueba ahora es
parte de un estándar patrocinado por la Asociación para el avance de la
instrumentación médica (Association for the Advancement of Medical
Instrumentation, AAMI). El borrador final, un esfuerzo conjunto de la FDA, los
fabricantes de dispositivos médicos y otros grupos, se concluyó a fines de
2000. Este estándar permitirá a los fabricantes asegurarse de que los
marcapasos cardiacos y los desfibriladores estén a salvo de EMI de
teléfonos inalámbricos.
10. ¿Qué hay del uso de teléfonos inalámbricos por parte de los niños?
La evidencia científica no muestra ningún peligro para los usuarios de
teléfonos inalámbricos, incluidos los niños y adolescentes. Si desea reducir
VX3400 69
Seguridad
La FDA ha probado aparatos para la sordera para determinar si reciben
interferencia de los teléfonos inalámbricos de mano y ayudó a desarrollar un
estándar voluntario patrocinado por el Instituto de Ingenieros en Electrónica
y Electricidad (IEEE). Este estándar especifica los métodos de prueba y los
requisitos de desempeño de los aparatos para la sordera y los teléfonos
inalámbricos de modo que no ocurra ninguna interferencia cuando una
persona use al mismo tiempo un teléfono y un aparato para la sordera que
sean “compatibles”. Este estándar fue aprobado por la IEEE en 2000.
10 Consejos de Seguridad para
Conductores
Un teléfono inalámbrico le ofrece la extraordinaria capacidad de
comunicarse por voz prácticamente en cualquier lugar y a cualquier hora.
Las ventajas de los teléfonos inalámbricos van acompañadas de una gran
responsabilidad por parte de los conductores.
Uando conduzca un coche, la conducción es su primera responsabilidad.
Cuando utilice un teléfono inalámbrico y esté al volante, sea sensato y tenga
presente los siguientes consejos:
La FDA sigue supervisando el uso de los teléfonos inalámbricos para
detectar posibles interacciones con otros dispositivos médicos.
1. Conozca su teléfono inalámbrico y sus funciones, como la marcación
rápida y la rellamada. Lea el manual de instrucciones con atención y
aprenda a sacar partido de las valiosas funciones que ofrecen la
mayoría de teléfonos, entre las que se incluyen la rellamada automática
y la memoria. Asimismo, memorice el teclado del teléfono para que
pueda utilizar la función de marcación rápida sin dejar de prestar
atención a la carretera.
Si se determinara que se presenta una interferencia dañina, la FDA realizará
las pruebas necesarias para evaluar la interferencia y trabajará para
resolver el problema.
12 ¿Dónde puedo hallar información adicional?
Para obtener información adicional, por favor consulte los recursos siguientes:
Página Web de la FDA sobre teléfonos inalámbricos
(http://www.fda.gov/cdrh/phones/index.html)
2. Cuando esté disponible, utilice un dispositivo de manos libres. Varios
accesorios para teléfonos inalámbricos con manos libres están a su
disposición actualmente. Tanto si elige un dispositivo montado e
instalado para su teléfono inalámbrico como si utiliza un accesorio para
teléfono con altavoz, saque partido de estos dispositivos si están a su
disposición.
Programa de seguridad de RF de la Comisión Federal de Comunicaciones (FCC)
(http://www.fcc.gov/oet/rfsafety)
Comisión Internacional para la Protección contra Radiación no Ionizante
(http://www.icnirp.de)
3. Asegúrese de que coloca el teléfono inalámbrico en un lugar de fácil
alcance y donde pueda utilizarlo sin perder de vista la carretera. Si
recibe una llamada en un momento inoportuno, si es posible, dejeque el
buzón de voz conteste en su lugar.
Proyecto de EMF internacional de la Organización Mundial de la Salud (OMS)
(http://www.who.int/emf)
Junta Nacional de Protección Radiológica (R.U.)
(http://www.nrpb.org.uk/)
70 VX3400
4. Termine las conversaciones que se produzcan en condiciones o
situaciones de conducción peligrosa. Comunique a la persona con la
que está hablando que está conduciendo; si fuera necesario, termine la
llamada en situaciones de tráfico denso o en las que las condiciones
climatológicas comporten un peligro para la conducción. La lluvia, el
aguanieve, la nieve y el hielo pueden ser peligrosos, así como un tráfico
denso. Como conductor, su principal responsabilidad es prestar
atención a la carretera.
8. Utilice el teléfono inalámbrico para pedir ayuda. Un teléfono inalámbrico
es una de las mejores herramientas que posee para protegerse a usted
y proteger a su familia en situaciones peligrosas; con el teléfono a su
lado, sólo tres números le separarán de la ayuda necesaria. Marque el
911 u otro número de emergencia local en caso de incendio, accidente
de tráfico, peligro en la carretera o emergencia médica. Recuerde que
es una llamada gratuita para su teléfono inalámbrico.
9. Utilice el teléfono inalámbrico para ayudar a otras personas en
situaciones de emergencia. Un teléfono inalámbrico le ofrece la
oportunidad perfecta para ser un “Buen Samaritano” en su comunidad.
Si presencia un accidente de circulación, un delito o cualquier otra
emergencia grave en la que haya vidas en peligro, llame al 911 o a otro
número de emergencia local, ya que también le gustaría que otros lo
hicieran por usted.
5. No tome notas ni busque números de teléfono mientras conduce. Si
está leyendo una agenda o una tarjeta de visita, así como si está
escribiendo una lista de “tareas por hacer” mientras conduce, no está
viendo lo que está haciendo. Es de sentido común:no se ponga en una
situación peligrosa porque esté leyendo o escribiendo y no esté
prestando atención a la carretera o a los vehículos cercanos.
10. Llame al servicio de asistencia en carretera o a un número de asistencia
especial para situaciones que no sean de emergencia si fuera
6. Marque con cuidado y observe el tráfico; si es posible, realice las
llamadas cuando no esté circulando o antes de ponerse en circulación.
Intente planificar sus llamadas antes de iniciar el viaje o intente que
éstas coincidan con los momentos en los que esté parado en una señal
de Stop, en un semáforo en rojo o en cualquier otra situación en la que
deba detenerse. Si necesita marcar mientras conduce, siga este
sencillo consejo: marque unos cuantos números, compruebe la
carretera y los espejos y, a continuación, siga marcando.
necesario. Durante la conducción encontrará situaciones que precisen
de atención, pero no serán lo bastante urgentes como para llamar a los
servicios de emergencia. Sin embargo, puede utilizar el teléfono
inalámbrico para echar una mano. Si ve un vehículo averiado que no
supone un peligro, una señal de tráfico rota, un accidente de tráfico de
poca importancia en la que no parece haber heridos o un vehículo
robado, llame al servicio de asistencia en carretera o a otro número de
asistencia especial para situaciones que no sean de emergencia.
7. No mantenga conversaciones conflictivas o de gran carga emocional
que puedan distraerle. Este tipo de conversaciones debe evitarse a toda
costa, ya que le distraen e incluso le pueden poner en peligro cuando
está al volante. Asegúrese de que la gente con la que está hablando
sabe que está conduciendo y, si fuera necesario, termine aquellas
conversaciones que puedan distraer su atención de la carretera.
Para obtener más información, llame al 888-901-SAFE o visite nuestro sitio
Web www.ctia.org.
VX3400 71
Seguridad
disponible para su venta al público, debe probarse y certificarse ante la FCC que
demostrar que no supera el límite establecido por el gobierno para la exposición
segura. Las pruebas se realizan en posiciones y ubicaciones (por ejemplo, en la
oreja y llevándolo en el cuerpo) según lo demanda la FCC para cada modelo.
El valor SAR más alto de este modelo de teléfono cuando se probó usándolo
cerca del oído es de 0.937 W/kg y al usarlo en el cuerpo, como se describe en
esta guía del usuario es de 0.562 W/kg (las mediciones de uso en el cuerpo
difieren según los modelos de teléfono en función de los accesorios disponibles y
los requisitos de la FCC). Aun cuando puede haber diferencias entre los niveles de
SAR de varios teléfonos y en varias posiciones, todos ellos cumplen el requisito
gubernamental para una exposición segura.
Información al consumidor sobre la SAR
(Tasa de absorción específica, Specific Absorption Rate)
Este modelo de teléfono cumple con los requisitos gubernamentales de
exposición a las ondas de radio. Su teléfono inalámbrico es un transmisor y
receptor de radio. Está diseñado y fabricado para que no supere los límites de
emisión para la exposición a energía de Radio Frecuencia (RF) establecidos por la
Comisión Federal de Comunicaciones del gobierno de EE.UU. Estos límites son
parte de unos lineamientos generales y establecen los niveles permitidos de
energía de radiofrecuencia para la población en general. Estos lineamientos están
basados en estándares que desarrollaron organizaciones científicas
independientes por medio de una evaluación periódica y exhaustiva de los
estudios científicos. Los estándares incluyen un notable margen de seguridad
diseñado para garantizar la salud de todas las personas sin importar su edad o
condición física.
La FCC ha otorgado una Autorización de equipo para este modelo de teléfono con
todos los niveles de SAR reportados y evaluados en cumplimiento de los
lineamientos de emisión de radiofrecuencias de la FCC. La información sobre SAR
de este modelo de teléfono está archivada con la FCC y puede encontrarse en la
sección Display Grant (Mostrar subvención) de http://www.fcc.gov/oet/fccid
después de buscar la ID BEJVX3400 de la FCC.
El estándar de exposición para los teléfonos celulares inalámbricos emplea una
unidad de medida llamada Tasa de absorción específica o SAR. El límite de SAR
establecido por la FCC es de 1.6 W/kg. Las pruebas de SAR se realizan usando
posiciones de funcionamiento estándar especificadas por la FCC con el teléfono
transmitiendo a su nivel de energía certificado más alto en todas las bandas de
frecuencia probadas. Aunque la SAR se determina al nivel de potencia más alto
certificado, el nivel de SAR real del teléfono en funcionamiento puede estar muy
por debajo del valor máximo. Dado que el teléfono está diseñado para funcionar a
varios niveles de potencia para usar sólo la necesaria para llegar a la red, en
general, mientras más cerca esté de una antena de estación de base inalámbrica,
menor será la emisión de potencia. Antes de que un modelo de teléfono esté
Se puede encontrar información adicional sobre Tasas de absorción específica
(SAR) en el sitio Web de la Asociación de la Industria de las Telecomunicaciones
Celulares (Cellular Telecommunications Industry Association, CTIA) en
http://www.ctia.org.
*
En Estados Unidos y Canadá, el límite de SAR de los teléfonos celulares
usados por el público es de 1.6 watts/kg (W/kg) promediados sobre un gramo
de tejido. El estándar incluye un margen sustancial de seguridad para dar
una protección adicional al público y para tomar en cuenta cualquier
variación en las mediciones.
72 VX3400
tienen la clasificación en su caja o llevan una etiqueta situada en
la caja.
Reglas para la compatibilidad con
aparatos para la sordera (HAC) de la FCC
para los dispositivos inalámbricos
Las clasificaciones no son garantías. Los resultados variarán en
función del dispositivo auditivo del usuario y su pérdida de
audición. Si su dispositivo auditivo resultara ser vulnerable a la
interferencia, es posible que no pueda usar satisfactoriamente un
teléfono clasificado. Probar el teléfono con su dispositivo auditivo
es la mejor forma de evaluarlo para sus necesidades personales.
El 10 de julio de 2003, el Informe y orden de la minuta WT 01-
309 de la Comisión federal de comunicaciones (FCC) de los
EE.UU. modificó la excepción a los teléfonos inalámbricos en los
términos de la Ley de compatibilidad con aparatos para la
sordera de 1988 (Ley HAC) para exigir que los teléfonos
inalámbricos digitales sean compatibles con los aparatos para la
sordera. El objetivo de la Ley HAC es asegurar un acceso
razonable a los servicios de telecomunicaciones por parte de las
personas con discapacidades auditivas.
Clasificaciones M: Los teléfonos con clasificación M3 o M4
cumplen los requisitos de la FCC y probablemente generen menos
interferencia para los dispositivos auditivos que los teléfonos no
etiquetados. M4 es la mejor o más alta de las dos clasificaciones.
Clasificaciones T: Los teléfonos clasificados como T3 o T4
cumplen con los requisitos de la FCC y es probable que generen
menos interferencia a los dispositivos para la audición que los
teléfonos que no están etiquetados. T4 la mejor o más alta de las
dos clasificaciones.
Aunque algunos teléfonos inalámbricos se usan cerca de
algunos dispositivos para la audición (aparatos para la sordera e
implantes cocleares), los usuarios pueden detectar un ruido de
zumbido, murmullo o chirrido. Algunos dispositivos auditivos son
más inmunes a este ruido de interferencia que otros, y los
teléfonos también varían en la cantidad de interferencia que
generan.
Los dispositivos auditivos también pueden estar clasificados. El
fabricante de su dispositivo auditivo o su profesional de la salud
auditiva puede ayudarle a encontrar esta clasificación. Las
clasificaciones más altas indican que el dispositivo auditivo es
relativamente inmune al ruido de interferencia. Los valores de la
clasificación del aparato para sordera y el teléfono inalámbrico
se suman. Una suma de 5 se considera aceptable para el uso
normal. Una suma de 6 se considera como la de mejor uso.
La industria de los teléfonos inalámbricos ha desarrollado un
sistema de clasificación para los teléfonos inalámbricos, para
ayudar a los usuarios de dispositivos auditivos a encontrar
teléfonos que puedan ser compatibles con sus dispositivos. No se
han clasificado todos los teléfonos. Los teléfonos clasificados
VX3400 73
Seguridad
Para obtener información sobre los aparatos para
audición y los teléfonos digitales inalámbricos
Compatibilidad y control de volumen según la FCC
http://www.fcc.gov/cgb/dro/hearing.html
En el ejemplo antes señalado, si un aparato para sordera
cumple con la clasificación de nivel M2 y el teléfono
Universidad de Gallaudet, RERC
http://tap.Gallaudet.edu/DigWireless.KS/DigWireless.htm
inalámbrico cumple la clasificación de nivel M3, la suma de los
dos valores es igual a M5. Esto debería proporcionar al usuario
del aparato para sordera un "uno normal” al usar su dispositivo
auditivo con ese teléfono inalámbrico en particular. “Uso
normal” en este contexto se define como una calidad de señal
que es aceptable para el funcionamiento normal.
Hearing Loss Association of America [HLAA]
http://www.hearingloss.org/learn/cellphonetech.asp
Orden de compatibilidad con aparatos para la audición
de la FCC
La marca M tiene tiene por objeto ser sinónimo de la marca U.
La marca T tiene tiene por objeto ser sinónimo de la marca UT.
Las marcas M y T son recomendadas por la Alianza para las
soluciones de las industrias de telecomunicaciones (ATIS). Las
marcas U y UT se referencian en la Sección 20.19 de las reglas
de la FCC. El procedimiento de clasificación y medición HAC se
describe en el estándar C63.19 del Instituto de estándares
nacional estadounidense (ANSI).
http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-
03-168A1.pdf
74 VX3400
Accesorios
Hay diversos accesorios disponibles para su teléfono celular. Consulte a su distribuidor local para saber con cuáles cuenta.
Manos Libres para Diadema
La manos libres para diadema se conecta
al teléfono permitiendo un funcionamiento
de manos libres. Incluye auriculares,
micrófono y botón integrado de
Batería
Hay dos baterías disponibles. La batería
estándar y la extendida.
contestación/fin de llamada.
Cargador
El cargador, le permite cargar la batería
cuando esté fuera de su casa u oficina.
Cable del USB
Conecta su teléfono con su computadora
personal.
Adaptador para el Automóvil
(Portátil)
El adaptador para el automóvil le permite
hacer funcionar el teléfono y llevar a cabo
una carga lenta de la batería del teléfono
en su vehículo.
Cargador de baterías
El cargador de baterías le permite cargar
la batería sola, sin el teléfono.
Kit de manos libres para
automóvil (Portátil)
Funda
El kit de manos libres para automóvil, le
permite conectar el teléfono a la toma de
corriente de su automóvil, y utilizarlo sin
tener que sujetarlo.
VX3400 75
DECLARACIÓN DE GARANTÍA LIMITADA
1. LO QUE CUBRE ESTA GARANTIA:
2. LO QUE NO CUBRE ESTA GARANTIA:
LG le ofrece una garantia limitada de que la unidad de suscriptor
adjunta y sus accesorios incluidos estaran libres de defectos de
materiales y mano de obra segun los terminos y condiciones siguientes:
(1)
(2)
Defectos o danos producto del uso del producto de una forma
distinta de la normal y acostumbrada.
Defectos o danos producto de un uso anormal, condiciones
anormales, almacenamiento inadecuado, exposicion a humedad o
agua, modificaciones no autorizadas, conexiones no autorizadas,
reparacion no autorizada, mal uso, negligencia, abuso, accidentes,
alteraciones, instalacion incorrecta o cualquier otro acto que no sea
responsabilidad de LG, incluido el dano causado por la
(1)
La garantia limitada del producto se prolonga durante DOCE (12)
MESES contado a partir de la fecha de adquisicion del producto.
El periodo de garantia restante QUINCE (15) MESES de la unidad
que se esta reparando o sustituyendo se determinara mediante
la presentacion del recibo de ventas original por la compra de la
unidad.
transportacion, fusibles fundidos y derrames de alimentos o liquidos.
(2)
(3)
La garantia limitada se extiende solo al comprador original del
producto y no es asignable ni transferible a ningun otro
comprador o usuario final subsecuentes.
Esta garantia solo es buena para el comprador original del
producto durante el periodo de garantia siempre que sea en los
EE.UU., incluidos Alaska, Hawaii, los territorios de los EE.UU. y
todas las provincias canadienses.
(3)
(4)
Rotura o danos a las antenas a menos que hayan sido ocasionadas
directamente por defectos en los materiales o mano de obra.
El consumidor debe notificar al Departamento de servicio al cliente
de LG el supuesto defecto o desperfecto del producto durante el
periodo de garantia limitada aplicable para hacer efectiva la garantia.
(5)
(6)
Productos a los que se haya eliminado el numero de serie, o en los
que este sea ilegible.
(4)
La carcasa externa y las partes cosmeticas estaran libres de
defectos al momento de la distribucion, y por tanto no estaran
cubiertas por los terminos de esta garantia limitada.
Esta garantia limitada se otorga en lugar de cualquier otra garantia,
explicita o implicita, de hecho o por lo dispuesto en las leyes,
establecido por ellas o implicado, incluso, aunque de manera
enunciativa y no limitativa, cualquier garantia implicita de
comerciabilidad o adecuacion para un uso en particular.
(5)
(6)
A solicitud de LG, el consumidor debera aportar informacion
aceptable para probar la fecha de compra.
El cliente se hara cargo del costo de envio del producto al
Departamento de servicio al cliente de LG. LG se hara cargo del
costo de envio del producto de vuelta al consumidor despues de
realizar el servicio segun esta garantia limitada.
(7)
(8)
Danos resultantes del uso de accesorios no aprobados por LG.
Todas las superficies de plastico y todas las demas piezas externas
expuestas que se rayen o danen debido al uso normal por parte del
cliente.
76 VX3400
(9)
Productos que hayan sido puestos en funcionamiento por encima de
las limitaciones maximas indicadas.
4. CÓMO OBTENER SERVICIO POR LA GARANTÍA:
Para obtener servicio de esta garantia llame al siguiente telefono desde
cualquier ubicacion continental de los Estados Unidos:
(10) Productos utilizados u obtenidos en un programa de arrendamiento.
(11) Consumibles (como seria el caso de los fusibles).
Tel. 1-800-793-8896 o Fax. 1-800-448-4026
O visite http://us.lgservice.com. También puede enviar
correspondencia a:
3. DERECHOS DE LA LEY ESTATAL:
No se aplica a este producto ninguna otra garantia explicita. LA
DURACION DE CUALQUIER GARANTIA IMPLICITA, INCLUIDA LA
GARANTIA IMPLICITA DE COMERCIABILIDAD, SE LIMITA A LA
DURACION DE LA GARANTIA EXPLICITA AQUI INDICADA. LGE
MOBILECOMM USA, INC. NO TENDRA RESPONSABILIDAD LEGAL POR
LA PERDIDA DEL USO DE ESTE PRODUCTO, LAS INCOMODIDADES,
PERDIDAS O CUALQUIER OTRO DANO, DIRECTO O CONSECUENCIAL,
QUE SE PRODUZCA POR EL USO O LA INCAPACIDAD DE USAR ESTE
PRODUCTO, NO POR LA VIOLACION DE CUALQUIER GARANTIA
EXPLICITA O IMPLICITA, INCLUIDA LA GARANTIA IMPLICITA DE
COMERCIABILIDAD APLICABLE A ESTE PRODUCTO.
LG Electronics Service- Mobile Handsets,
P.O. Box 240007, Huntsville, AL 35824
NO DEVUELVA SU PRODUCTO A LA DIRECCIÓN
ARRIBA INDICADA. Llame o escriba para conocer la
ubicación del centro de servicio autorizado LG más cercano a
usted y los procedimientos necesarios para presentar una
reclamación por garantía.
Algunos paises no permiten la excluyente de limitacion de danos
incidentales o consecuenciales, o las limitaciones sobre la duracion de
la garantia implicita, de modo que es posible que estas limitaciones o
exclusiones no se le apliquen a usted. Esta garantia le concede
derechos legales concretos y es posible que tambien tenga otros
derechos, que varian de estado a estado.
VX3400 77
Índice
A
E
H
Borrar Todo 40
Búsqueda en la
memoria del teléfono
24
Actualización de la FDA
para los consumidores
65
Emergencia #s 54
En caso de emergencia
29
Hacer llamadas 15
Hacer llamadas desde
la memoria del teléfono
25
Aeronaves 62
Ajuste rápido del
volumen 17
Encender y apagar el
teléfono 14
C
I
Calculadora 45
Colores de tema 51
Configuraciones de
mensaje 38
EZ Sugerencia 45
Entrada 36
Iconos en pantalla 14
Id. de quien llama 17
Idioma 52
Alarma de reloj 44
Alertas Mensaje 47
Ambiente 46
Estilo del menú 51
F
Iluminación de fondo 49
Indicador de marcado
por voz 59
Contactos 26
Animaciónes 42
Aparato 43
Contador de KB 32
Contraste 51
Fijar NAM 52
Firma 39
Atajo 45
Correo de voz# 39
Fuente 51
Información al
Auto borrar 39
Auto guardar 39
Auto NAM 53
Auto Respuesta
automát 56
Función de silencio 17
Funciones 56
consumidor sobre la
SAR 72
D
Descripción general de
los menús 12
Descripción general del
teléfono 10
Información de
seguridad 63
G
Grandes Img 41
Grupos 28
Guardado 38
Información de
seguridad de la TIA 61
Introducción de texto 18
Auto Volumen 57
B
Bloq. Teléfono 53
Borrado Llam. 32
Borrar 23
Borrar Contactos 55
78 VX3400
L
P
Mi Melodia 41
Sistema 52
Sonidos 47
La Batería 13
Mi VCard 29
Palabras de aprendizaje
59
Lista de Contactos 27
Lista Llam 30
Mis Animaciónes 42
Mis Imágenes 41
Modalidad de asentar 39
Modalidad TTY 57
Modo de bloqueo 16
Modo de manerae 16
Modo Standalone 59
Mostrar 49
T
Pantallas 50
Pendon 49
Texto rápido 39
Tiempo de uso 32
Timbres 47
Llam.bloqueado* 31
Llam.entrante 31
Llam.fracasada 31
Llam.saliente 30
Llamada en espera 17
Llame al # 39
Pequeña Img 41
Plan 43
Tono de activación/
desactivación 48
Tono de tecla 47
Poder Salvo 52
Privacidad de voz 57
R
Longitud de DTMF 49
Lugar 59
V
N
Recibir llamadas 16
Reintento Automático 56
Reloj universal 46
Relojes 51
Vehículos 62
Vista automatica 39
Volumen 47
Nota 45
M
Nuevo E-mail 27
Nuevos Mensaje 33
Nuevo Número 27
Manejo 61
Marcaciones de un
toque 56
Reporduccion
automatica 39
O
Marcaciones para voz 59
Marcaciones por Voz 28
Marcaciones Rápidas 28
Marcado rápido 17
Marcapasos 62
Media 40
Respuesta de llamada 56
Restablecer Implícito 55
Otros dispositivos
médicos 62
S
Salida 37
Seguridad 53
Seleccione Sistema 52
Servicio Alertas 48
Sist.de servicio 53
Memo Vocal 44
Mensajes 32
VX3400 79
Glosario
determinadas redes. Un teléfono habilitado
para EMS puede enviar y recibir mensajes
con formato especial de texto (como negritas
y cursivas), animaciones, imágenes, iconos,
efectos de sonido y tonos de timbre
especiales. Los mensajes EMS enviados a
dispositivos que no son de EMS se mostrarán
como transmisiones de SMS.
Terminología
Compositor de melodías
Función que le permite crear melodías con el teclado del
teléfono.
Calculadora EZ Tip
Función para un fácil cálculo de las cuentas de
restaurante usando como variables el costo total, la
propina y el número de personas.
ERI
Enhanced Roaming Indicator (indicador de
roaming optimizado) es una característica
para indicar si un teléfono celular está en su
sistema de origen, una red asociada o una
red de roaming. Muchos teléfonos indican
origen o roaming como un icono, pero los
teléfonos con ERI pueden indicar el estado
de "red asociada" de otro proveedor.
Siglas y abreviaturas
DTMF
Dual-Tone Multi Frequency (multifrecuencia
de tono doble o “tono de tecla”) es un
método usado para comunicar las teclas que
se oprimen en el teléfono. Al oprimir una
tecla se generan dos tonos simultáneos, uno
para la fila y otro para la columna, para
determinar qué tecla se oprimió.
GPS
Global Positioning System (sistema de
posicionamiento globao) es un sistema de
satélites, computadoras y receptores
capaces de determinar la latitud y longitud
de un receptor determinado en la Tierra. La
posición se calcula usando el tiempo y la
distancia.
EMS
Enhanced Messaging Service (servicio de
mensajería mejorada) es una extensión de
SMS para teléfonos celulares disponible en
80 VX3400
IS 2000 Tipo de señal digital. Es la segunda
generación de celular digital CDMA, una
extensión del IS-95. Las diferencias entre los
tipos de señal se refieren a las señales piloto
y a los enlaces para porporcionar más
SMS
Short Message Service (servicio de
mensajes cortos) es un servicio disponible
en la mayoría de los teléfonos celulares
digitales para enviar mensajes entre
teléfonos u otros dispositivos. Los mensajes
se enrutan a un Centro de servicio de
mensajes cortos (Short Message Service
Center, SMSC), que intenta enviar el mensaje
y, si no lo consigue, posiblemente
reintentarlo más adelante. Es posible que
haya retrasos o pérdidas de mensajes,
especialmente en los envíos entre redes
diferentes. Los usuarios pueden solicitar
informes de confirmación de entrega.
canales de tráfico y protocolos de control.
NAM
Number Assignment Module (módulo de
asignación de número) es la forma en que el
teléfono almacena el número de teléfono y
su número de serie electrónico. Un teléfono
de NAM múltiple se puede registrar con
varios proveedores de servicio y
configurarse para alternar automáticamente
entre los números de teléfono programados
de las áreas de los proveedores de servicio.
TTY
Teletypewriter (máquina de escribir a
distancia). Una máquina de escribir
electromecánica que transmite o recibe
mensajes codificados en las señales
eléctricas. Un teléfono con compatibilidad
TTY puede traducir caracteres escritos como
voz o traducir la voz en caracteres y
mostrarlos en la TTY.
SID
System Identification (identificación del
sistema) es un número transmitido por las
estaciones de base para identificar a un
sistema inalámbrico que se ajuste al estándar
celular TIA o PCS. La SID es empleada por los
teléfonos celulares para reconocer cuándo
están en su sistema de origen y pueden
usarse para efectos de facturación como una
identificación única del sistema servidor.
VX3400 81
|
National Instruments Computer Accessories NI USB 9237 User Manual
MTD 246 641A000 User Manual
Motorola M3588 User Manual
Motorola Atrix 4G MB860 User Manual
Kenwood KDC 9026R User Manual
Kenwood KDC 3029R User Manual
JVC FSUN3121 T451 KD S676R User Manual
FieldServer Dart FS 8700 78 User Manual
Dolphin Peripherals 6100 User Manual
Black Box Computer Accessories KVT16CATUV User Manual