KDC-9026R
CD-RECEIVER
INSTRUCTION MANUAL
© B64-2758-00/00 (MV)
Menu system
38
Basic Operations of remote
46
Menu System
Security Code
Loading and Replacing the battery
Basic operations
Touch Sensor Tone
Manual Clock Adjustment
Date Adjustment
In Tuner source
In Disc source
In TV source
Date Mode
Synchronize Clock
DSI (Disabled System Indicator)
Selectable Illumination
Triangle indicator setting
Font Type Select
Accessories/
Installation Procedure
48
49
51
53
54
58
Connecting Wires to Terminals
Installation
Dimmer
OFF Wait Time Setting
Eject angle setting
Panel action setting
Audio Setup
Built-in Amp Mute Setting
B.M.S. (Bass Management System)
B.M.S. Frequency Offset
News Bulletin with Timeout Setting
Local Seek
Removing the Unit
Troubleshooting Guide
Specifications
Tuning Mode
Auto Memory Entry
AF (Alternative Frequency)
Restricting RDS Region (Region Restrict
Function)
Auto TP Seek
Monaural Reception
Text Scroll
Built-in Auxiliary input Setting
CD Read Setting
Picture downloading
AMP Control
Rotary volume operation select
English
|
3
Safety precautions
2WARNING
2CAUTION
To prevent injury or fire, take the
following precautions:
• Insert the unit all the way in until it is fully locked
in place. Otherwise it may fall out of place when
jolted.
To prevent damage to the machine, take
the following precautions:
• Make sure to ground the unit to a negative 12V
DC power supply.
• Do not open the top or bottom covers of the unit.
• When extending the ignition, battery, or ground
wires, make sure to use automotive-grade wires
or other wires with a 0.75mm² (AWG18) or more
to prevent wire deterioration and damage to the
wire coating.
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools)
inside the unit.
• Do not install the unit in a spot exposed to direct
sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of
water splashing.
• Do not set the removed faceplate or the faceplate
case in areas exposed to direct sunlight, excessive
heat or humidity. Also avoid places with too much
dust or the possibility of water splashing.
• If the unit starts to emit smoke or strange smells,
turn off the power immediately and consult your
Kenwood dealer.
• To prevent deterioration, do not touch the
terminals of the unit or faceplate with your
fingers.
• Make sure not to get your fingers caught between
the faceplate and the unit.
• Do not subject the faceplate to excessive shock,
as it is a piece of precision equipment.
• Be careful not to drop the unit or subject it to
strong shock.
The unit may break or crack because it contains
glass parts.
• When replacing a fuse, only use a new one with
the prescribed rating. Using a fuse with the wrong
rating may cause your unit to malfunction.
• To prevent a short circuit when replacing a fuse,
first disconnect the wiring harness.
• Do not place any object between the faceplate
and the unit.
• Do not apply excessive force to the moving
faceplate. Doing so will cause damage or
malfunction.
• Do not apply excessive force to the open
faceplate or place objects on it. Doing so will
cause damage or breakdown.
• Do not use your own screws. Use only the screws
provided. If you use the wrong screws, you could
damage the unit.
|
4
English
About CD players/disc changers
connected to this unit
KENWOOD disc changers/ CD players released in
1998 or later can be connected to this unit.
Refer to the catalog or consult your Kenwood
dealer for connectable models of disc changers/
CD players.
Note that any KENWOOD disc changers/ CD players
released in 1997 or earlier and disc changers made
by other makers cannot be connected to this unit.
Unsupported connection may result in damage.
Setting the "O-N" Switch to the "N" position for the
applicable KENWOOD disc changers/ CD players.
The functions that can be used and the information
that can be displayed will differ depending on the
models being connected.
NOTE
• If you experience problems during installation,
consult your Kenwood dealer.
• If the unit fails to operate properly, press the Reset
button. The unit returns to factory settings when
the Reset button is pressed. If the unit still fails to
operate properly after the Reset button has been
pressed, contact your local KENWOOD dealer for
assistance.
• Press the reset button if the disc auto changer fails
to operate correctly. Normal operation should be
restored.
•
You can damage both your unit and the CD changer if
you connect them incorrectly.
Reset button
LX-bus connection
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on
the display on the actual equipment, and some
of the illustrations on the display may represent
something impossible in actual operation.
The LX AMP and the sensor unit cannot be
connected simultaneously.
You must connect any of them at a time.
(The power supply does not turn ON if you have
connected both of them.)
Do Not Load 8 cm (3 in.) CDs in the CD
slot
If you try to load a 8 cm (3 in.) CD with its adapter
into the unit, the adapter might separate from the
CD and damage the unit.
Lens Fogging
Right after you turn on the car heater in cold
weather, dew or condensation may form on
the lens in the CD player of the unit. Called lens
fogging, CDs may be impossible to play. In such
a situation, remove the disc and wait for the
condensation to evaporate. If the unit still does
not operate normally after a while, consult your
Kenwood dealer.
English
|
5
Notes
Cleaning the Unit
Dolby Pro Logic II
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off
with a cloth moistened with neutral cleaner, then
wipe neutral detergent off.
The matrix decoding technologies that have been
evolved from the conventional Dolby Pro Logic
system and that is based on the latest digital matrix
technologies. It realizes the excellent 5.1-channel
sound playback of Dolby Surround and ordinary CD
stereo sounds. You can enjoy surround channels as
full-band sounds (from 20 Hz to 20 kHz) and stereo
sources as real 5.1-channel sounds. The Movie
mode, Music mode, Matrix mode, can be selected
according to the playback source. When the Dolby
Pro Logic II mode is selected, the sound level is
slightly dropped due to its characteristics.
•
Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth
or using a volatile liquid such as thinner or alcohol may
scratch the surface or erases characters.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty,
wipe them with a dry, soft cloth.
Manufactured under license from Dolby
Laboratories.
"Dolby", "Pro Logic", and the double-D symbol
are trademarks of Dolby Laboratories.
Cleaning the CD Slot
As dust tends to accumulate in the CD slot, clean it
every once in a while. Your CDs can get scratched if
you put them in a dusty CD slot.
About RDS
RDS (Radio Data System)
When listening to an RDS station, the program
service name of the station is displayed, advising
you quickly which station is being received.
RDS (Radio Data System) stations also transmit
frequency data for the same station. When you
are making long trips, this function automatically
alternative switches to the particular frequency
with the best reception for the particular network
of stations that you want to listen to. The data is
automatically stored, allowing you to switch quickly
to another RDS stations, broadcasting the same
program, that has better reception. These include
stations stored in the station preset memory that
you often listen to.
The marking of products using lasers
(Except for some areas)
CLASS 1
LASER PRODUCT
The label is attached to the chassis/case and says
that the component uses laser beams that have
been classified as Class 1. It means that the unit
is utilizing laser beams that are of a weaker class.
There is no danger of hazardous radiation outside
the unit.
Enhanced Other Network
Stations that offer <Enhanced Other Network> also
transmit information about other RDS stations that
have traffic information. When you are tuned to a
station that is not transmitting traffic information,
but another RDS station starts transmitting a traffic
bulletin, the tuner automatically switches to the
other station for the duration of the bulletin.
WOW, SRS and
Labs, Inc.
symbol are trademarks of SRS
WOW technology is incorporated under license
from SRS Labs, Inc.
Alarm
When an emergency transmission (announcing
disasters, etc.) is sent, all current functions are
interrupted to allow the warning to be received.
|
6
English
About CDs
Handling CDs
• Don’t touch the recording surface of the CD.
Removing CDs
When removing CDs from this unit pull them out
horizontally.
CDs that can’t be used
• CDs that aren’t round can’t be used.
• CD-R and CD-RW are easier to damage than a
normal music CD. Use a CD-R or a CD-RW after
reading the caution items on the package etc.
• Don’t stick tape etc. on the CD.
Also, don’t use a CD with tape stuck on it.
• CDs with coloring on the recording surface or that
are dirty can’t be used.
• This unit can only play the CDs with
When using a new CD
If the CD center hole or outside rim has burrs, use it
after removing them with a ball pen etc.
.
It may not correctly play discs which do not have
the mark.
• A CD-R or CD-RW that hasn’t been finalized can’t
be played. (For the finalization process refer to
your CD-R/CD-RW writing software, and your CD-
R/CD-RW recorder instruction manual.)
Burrs
Burrs
CD storage
• Don’t place them in direct sunlight (On the seat
or dashboard etc.) and where the temperature is
high.
• Store CDs in their cases.
CD accessories
Don’t use disc type accessories.
CD cleaning
Clean from the center of the disc and move
outward.
English
|
7
Notes on playing MP3/WMA
Note, however, that the MP3/WMA recording
media and formats acceptable are limited. When
writing MP3/WMA, pay attention to the following
restrictions.
•
Play mode may not be possible when portions of the
functions of Windows Media Player 9 or higher are used.
Entering ID3 tag
The Displayable ID3 tag is ID3 version 1.x.
For the character code, refer to the List of Codes.
Acceptable media
The MP3/WMA recording media acceptable to this
unit are CD-ROM, CD-R, and CD-RW.
When using CD-RW, do full format not quick format
to prevent malfunction.
Acceptable medium formats
The following formats are available for the media
used in this unit. The maximum number of
characters used for file and folder name including
the delimiter (".") and three-character extension are
indicated in parentheses.
• ISO 9660 Level 1 (12 characters)
• ISO 9660 Level 2 (31 characters)
• Joliet (64 character)
• Romeo (128 character)
• Long file neme (200 characters)
• Maximum number of characters for folder name:
64
For a list of available characters, see the instruction
manual of the writing software and the section
Entering file and folder names below.
The media reproducible on this unit has the
following limitations:
Entering file and folder names
The code list characters are the only file names and
folder names that can be entered and displayed.
If you use any other character for entry, the file and
folder names are not displayed correctly. They may
neither be displayed correctly depending on the CD
writer used.
The unit recognizes and plays only those MP3/WMA
which have the MP3/WMA extension (.MP3/.WMA).
• Maximum number of directory levels: 8
• Maximum number of files per folder: 255
• Maximum number of folders: 100
MP3/WMA written in the formats other than the
above may not be successfully played and their file
names or folder names are not properly displayed.
•
A file with a name entered with characters not on the
code list may not play correctly.
Writing files into a medium
When a medium containing MP3/WMA data is
loaded, the unit checks all the data on the medium.
If the medium contains a lot of folders or non-MP3/
WMA files, therefore, it takes a long time until the
unit starts playing MP3/WMA.
Settings for your MP3/WMA encoder and
CD writer
Do the following setting when compressing
audio data in MP3/WMA data with the MP3/WMA
encoder.
In addition, it may take time for the unit to move
to the next MP3/WMA file or a File Search or Folder
Search may not be performed smoothly.
• Transfer bit rate: MP3: 8 —320 kbps
WMA: 48 —192 kbps
• Sampling frequency
MP3: 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 kHz
WMA: 32, 44.1, 48 kHz
When you use your CD writer to record MP3/WMA
up to the maximum disc capacity, disable additional
writing. For recording on an empty disc up to the
maximum capacity at once, check Disc at Once.
Loading such a medium may produce loud noise to
damage the speakers.
•
Do no attempt to play a medium containing a non-MP3/
WMA file with the MP3/WMA extension.
The unit mistakes non-MP3/WMA files for MP3/WMA data
as long as they have the MP3/WMA extension.
Do not attempt to play a medium containing non MP3/
WMA.
•
|
8
English
MP3/WMA playing order
When selected for play, Folder Search, File Search,
or for Folder Select, files and folders are accessed
in the order in which they were written by the CD
writer.
Because of this, the order in which they are
expected to be played may not match the order in
which they are actually played. You may be able to
set the order in which MP3/WMA are to be played
by writing them onto a medium such as a CD-R
with their file names beginning with play sequence
numbers such as "01" to "99", depending on your
CD writer.
When a File Search is executed with file ¡$
being played ...
Operation of
(Current file: ¡$)
the button
4 Button
Beginning of file ¡$ ➜ ¡#
¢ Button
¡% ➜ ¡&
When a Folder Search is executed with file ¡$
being played ...
Operation of
(Current folder: 4)
the button
For example, a medium with the following folder/
file hierarchy is subject to Folder Search, File Search,
or Folder Select as shown below.
AM Button
FM Button
3 ➜ 2 ➜ 1 ➜ 8 ...
5 ➜ 6 ➜ 7 ➜ 8 ➜ 1 ...
Example of a medium’s folder/file hierarchy
Folder
When Folder Select is selected with file ¡$
being played to move from folder to folder ...
File
Operation of
Root
(Current folder: 4)
the button
4 Button
¢ Button
AM Button
FM Button
3
6
2
5
Level 1
Level 3
Level 5
Level 2
Level 4
English
|
9
Notes on Multi-function Key System
Multi-function Key System serves to control various
functions
with the [2] — [5] buttons.
The basic operation of the Multi-function Key
System is described below.
Real operational example of the Multi-
function Key System
Example: Turning ON/OFF the Random Play during
CD play.
1. Show the function display of the Random Play.
If "RDM" is not shown in the display, press the
[NEXT] button to switch the sections until the
"RDM" function display is shown above the [3]
button.
2. Turn ON/OFF the Random Play.
Press the [3] button.
Each time the [3] button under the "RDM"
function display is pressed the Random Play is
turned ON/OFF.
What’s the Multi-function Key System?
This unit is equipped with the Multi-function Key
System that enables the operation of multiple
functions with one button.
For example, you can enter the Display Control
Mode or turn ON/OFF the Random Play by pressing
the [3] button during CD play.
Setting each function
The function display will show the controllable
function of the [2] — [5] button above the button.
Pressing the [2] — [5] button below the desired
function enables the setting of the function.
EXT
Displaying the desired function
If five or more functions are available to be set with
the [2] — [5] button, they are divided into multiple
function groups (referred to as sections in this
manual) for registration.
Press the [NEXT] button to switch the sections.
If the display of the desired function is not shown,
press the [NEXT] button 1 to 3 times to switch the
sections until the wanted function display is shown.
Example: Function display of CD & External disc
source
•
"MRDM", "H-F", "SYNC" or "DISP" are displayed when an
optional accessory is connected.
|
10
English
Notes on Sound Management System
The KDC-9026R allows you to set up the best sound
field to your car using the audio setup. This is the
Sound Management System.
First, set up the sound field in your car by 'Audio
setup (Easy mode)' (page 24). Proceed to the
following steps for sound field setup.
There are two types of audio setup mode:
Easy audio setup (called Easy mode) and
Professional audio setup (called PRO mode).
1. Enter Audio Setup mode.
Press the [NEXT] button.
Repeatedly press the button until "AD SET" is
displayed above the [3] button.
Refer to 'Notes on Multi-function Key System'
(page 10).
2. Set the cabin size of your car.
Press the [2] ("CABIN") button.
3. Select the cabin size of your car.
Audio setup (Easy mode)
When you select the cabin size and the speaker
type you are using in the easy audio setup (Easy
mode), you can set the best sound field to your
car automatically.
Press the [4] or [¢] button.
4.Select a speaker
Press the [3] ("SP-SEL") button.
•
Refer to 'Audio Setup (Easy mode)' (page 24).
5.Set up the speaker
Press the [2] — [5] button.
Audio setup (PRO mode)
While in the professional audio setup (PRO
mode), you can fine-tune and memory the
X’Over (Cross-over), DTA (Digital Time Alignment),
and EQ (Equalizer), controls in addition to the
sound quality you have set in the audio setup
(Easy mode).
•
For the speakers you can set up using buttons [2] to
[5], see the 'Audio setup (Easy mode)' (page 24).
6. Select the speaker size.
Press the [4] or [¢] button.
7. Exit Audio setup mode
Press the [6] ("RTN") button.
•
Refer to 'Audio Setup (PRO mode)' (page 24).
Now, you can create the best sound field to your
car.
For the detailed speaker setup, see the 'Audio Setup
(PRO mode)' (page 24).
English
|
11
General features
ATT
1 - 6
NEXT
SRC
VOL
Q
38
SCRL/ AM/
NAME.S SW
FM
4
¢
Hiding the control panel
Power
Press the [SRC] button for at least 1 second.
When the time set in 'OFF Wait Time Setting'
(page 41) lapses, the panel is hidden and the
power turns OFF.
Turning ON the Power
Turn the vehicle ignition ON.
The panel appears.
Showing the control panel
Press the left part at the lower side of the
panel.
•
When the power is ON, the 'Security Code' (page 38)
is displayed as "CODE ON" or "CODE OFF".
Turing OFF the Power
Turn the vehicle ignition OFF or press the
[SRC] button for at least 1 second.
The panel hides.
•
Do not apply force to the panel during operation. It
can cause damage.
The panel is opened to enable the operation.
Hiding the Control Panel
Prevents tampering with the unit while your car is
being serviced etc.
|
12
English
Selecting the Source
Rotary Volume knob operation
mode select
Press the [SRC] button.
The rotary volume knob can be used for volume
adjustment and various function setups.
Source required
Tuner
Display
"TUNER"
CD
"Compact Disc"
"CD Changer"
"TV"
"AUX"
"STANDBY"
Available setup functions
The rotary volume knob can be used for the
following setup:
External disc (Optional accessory)
TV (Optional accessory)
Auxiliary input
• Menu system : Item selection
Standby (Illumination only mode)
• Audio Control : Adjustment of setup value
• Audio Setup : Adjustment of setup value
• Display control : Display switching
• Disc Naming : Character selection
• Folder select : Folder search
Volume
•
•
You can select the Rotary Volume Operation mode
only when the " " indicator is displayed above
the [1] button during any function setup.
Increasing Volume
Turn the [VOL] knob clockwise.
When the "
" indicator is ON, you cannot use the
rotary volume control for function setup and sound
level adjustment.
Decreasing Volume
Turn the [VOL] knob counterclockwise.
To use the rotary volume knob:
1 Turn the rotary volume operation ON
See the 'Rotary volume operation select' (45
page) and select "Rotary SEL: ON".
Attenuator
2 Selecting the Rotary Volume Operation
mode
Turning the volume down quickly.
Press the [ATT] button.
Press the [1] button.
Each time the button is pressed the Attenuator
turns ON or OFF.
When it’s ON, "ATT" is displayed.
When it’s ON, the "
" indicator blinks.
3 Setting the function
Rotate the Rotary Volume knob.
4 Terminates the function setup using the
rotary volume knob
Press the [1] button.
English
|
13
General features
External disc, or Auxiliary input source
Dual Zone System
•
•
The Dual Zone System can be used with the sources
shown below.
- Internal auxiliary input
- KCA-S210A
- CA-C1AX
Makes the sound different for the front channel
and rear channel.
Output the Internal source sound from either one
of the front or rear channels, and the sound of
other source from the Dual zone channel.
- External disc changer/ player
While Dual Zone System is ON, the setting of Dual
Zone System Front or Rear is disabled.
Set Dual Zone System Front or Rear first, and then set
the Dual Zone System to ON.
When the Dual Zone System is ON, there is no Dual
zone channel audio control or other effect.
When you use the Dual Zone System by selecting the
optional accessory source for the output of the Dual
zone channel, you cannot select another optional
accessory source as the source for the Internal source
channel.
1 Select the source
Press the [SRC] button.
Select the source sound to be output from the
Dual zone channel.
•
•
2 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "2-ZN" is
displayed above the [2] button.
Refer to 'Notes on Multi-function Key System'
(page 10).
•
•
The Dual Zone System cannot be used if a DAB
control unit is connected.
When the 'Dual Zone System' is ON, each of the
following setup is ignored.
3 Enter the Dual Zone System Control mode
Press the [2] ("2-ZN") button.
- "WOW"/ "PLII"/ "POSI"/ "PHASE"
4 Select the item for adjustment
Press the desired [2] — [3] button.
Each time the button is pressed the items that
can be adjusted switch as shown below.
('Audio control' (page 22))
- "X'over"/ "EQ"/ "DTA"
('Audio Setup (PRO mode)' (page 24))
- System Q
('System Q' (page 21))
Adjustment Item Button Display
Range
ON/OFF
Front/Rear
•
•
The Dual Zone System can be used only when you
have set the rear speaker to any mode other than
"None" in the 'Audio Setup (Easy mode)' (page 24).
When the source is selected to VZ-7000P/N (optional
accessory), the VZ-7000P/N sound is not output if the
Dual Zone System is turned ON.
Dual Zone System
[2]
[3]
"ON/OFF"
Dual Zone System
Front & Rear
"F j R"
Dual Zone System Rear:
The front is this unit’s internal source, and the rear is
selected source sound.
Dual Zone System Front:
The rear is this unit’s internal source, and the front is
selected source sound.
5 Exit the Dual Zone System Control mode
Press the [6] ("RTN") button.
Display Mode Switching
Switching the display mode.
6 Select the source
Press the [SRC] button.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is
displayed above the [4] button.
Refer to 'Notes on Multi-function Key System'
(page 10).
Select the source sound to be output from the
internal source channel.
|
14
English
Display:A
2 Enter display control mode
Press the [4] ("DISP") button.
Side Graphic Display Switching
3 Select the display mode
Switching the Side graphic Display.
Press the [2] ("MODE") button.
Each time the button is pressed the display
mode switches as shown below.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is
displayed above the [4] button.
Refer to 'Notes on Multi-function Key System'
(page 10).
Display Mode Display
"Display:A"
1
2
3
4
1
2 Enter display control mode
Press the [4] ("DISP") button.
"Display:B"
"Display:C"
"Display:D"
6
5
4
3 Select the display mode
Press the [2] ("MODE") button.
Select the "Display:A" display.
4 Enter display control mode
Press the [4] ("SIDE") button.
"Side Graphic" is displayed.
6
6
5
5 Select the side graphic display
Press the [4] or [¢] button.
Each time the button is pressed the side graphic
display switches as shown below.
Side graphic display
Text + Source
Graphic 1
1 Side graphic part
2 Upper text display part
3 Lower text display part
4 Function item display
5 Text display part
Graphic 3
Spectrum analyzer 1
6 Graphic & spectrum analyzer display part
4 Exit display control mode
Press the [6] ("RTN") button.
Spectrum analyzer 4
Blank
6 Exit display control mode
•
No function item is displayed if "Display:C" or "Display:
D" is selected. To use a function item, press any of [1]
to [6] buttons or [NEXT] button. The function item will
be displayed approximately 5 seconds.
When the 'Dual Zone System' (page 14) is ON, the
spectrum analyzer cannot be displayed.
The display is dimmed during "Display:B" or "Display:
C" mode.
Press the [6] ("RTN") button.
•
The setting of this function is available while "Display :
A" is selected for the Display mode.
•
•
•
The indicator appears only when the Clock is
displayed in the upper or lower position during
"Display:A" mode.
English
|
15
General features
Display:A
The text display in the Upper text display
part
Text Display Switching
In Tuner source
Switching the text display.
Information
Display
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is
displayed above the [4] button.
Refer to 'Notes on Multi-function Key System'
(page 10).
Program Service name or Frequency "BAND+ch+PS"
Radio text or Frequency
Date
Clock
"R-TEXT"
"DATE"
"CLOCK"
"S/ANA+CLOCK"
Spectrum Analyzer & Clock
Displaying the frequency during Program
Service name reception
2 Enter display control mode
Press the [4] ("DISP") button.
Press the [SCRL] button for at least 1 second.
The frequency for the RDS station will be
displayed for 5 seconds instead of the Program
Service name.
3 Select the display mode
Press the [2] ("MODE") button.
Select the "Display:A" display.
4 Enter text select mode
Press the [3] ("TEXT") button.
In CD & External disc source
Information
Disc title
Track title
Track number & Play time
Disc name
Date
Display
"DISC-TITLE"
"TRACK-TITLE"
"P-Time"
"DNPS"
"DATE"
•
In the Rotary Volume Operation mode, you can select
the Upper part or Lower part using button [3] ("TEXT")
and switch the display using the rotary volume key.
5 Select the text in the upper text display part
Press the [FM] or [AM] button.
Clock
"CLOCK"
Spectrum Analyzer & Clock
"S/ANA+CLOCK"
Select the text in the lower text display part
Press the [4] or [¢] button.
Refer to the table described later for setting
items.
In MP3/WMA source
Information
Display
Song title & Artist name
Album name & Artist name
Folder name
File name
Play time & File number
Date
"TITLE/ARTIST"
"ALBUM/ARTIST"
"FOLDER NAME"
"FILE NAME"
"P-Time"
"DATE"
"CLOCK"
"S/ANA+CLOCK"
6 Exit Display Control mode
Press the [6] ("RTN") button.
•
•
•
The setting of this function is available while "Display:
A" is selected for the Display mode.
Upper text display part cannot display the same
information as Lower text display part.
The Album name cannot be displayed during WMA
play.
Clock
Spectrum Analyzer & Clock
In Standby
Information
Standby (Illumination only mode)
Date
Display
"STANDBY"
"DATE"
Clock
"CLOCK"
|
16
English
In Auxiliary input source
In Standby
Information
Auxiliary input name
Date
Display
"AUX NAME"
"DATE"
Information
KENWOOD Logo
Clock
Display
"LOGO"
"CLOCK"
"DATE"
Clock
"CLOCK"
Date
Spectrum Analyzer & Clock
"S/ANA+CLOCK"
In Auxiliary input source
Information
KENWOOD Logo
Clock
Spectrum Analyzer & Clock
Date
Display
"LOGO"
"CLOCK"
"S/ANA+CLOCK"
"DATE"
•
If the Disc title, Track title, Song title & Artist name, or
Album name & Artist name is selected when the disc
which does not have Disc title, Track title, Song title,
Album name, or Artist name is played, track number
and play time are displayed.
•
•
If 'Dual Zone System' (page 14) is turned ON while the
spectrum analyzer is displayed, the spectrum analyzer
disappears from the display.
If the Disc title, Track title, Song title & Artist name, or
Album name & Artist name is selected when the disc
which does not have Disc title, Track title, Song title,
Album name, or Artist name is played, Kenwood Logo
are displayed.
The text display in the Lower text display
part
In Tuner source
Information
KENWOOD Logo
Clock
Display
"LOGO"
"CLOCK"
Spectrum Analyzer & Clock
Radio text
Date
"S/ANA+CLOCK"
"R-TEXT"
"DATE"
In CD & External disc source
Information
KENWOOD Logo
Clock
Display
"LOGO"
"CLOCK"
Spectrum Analyzer & Clock
Disc title
Track Title
"S/ANA+CLOCK"
"DISC-TITLE"
"TRACK-TITLE"
"DNPS"
Disc name
Date
"DATE"
In MP3/WMA source
Information
Display
KENWOOD Logo
Clock
"LOGO"
"CLOCK"
Spectrum Analyzer & Clock
Song title & Artist name
Album name & Artist name
Folder name
File name
Date
"S/ANA+CLOCK"
"TITLE/ARTIST"
"ALBUM/ARTIST"
"FOLDER NAME"
"FILE NAME"
"DATE"
English
|
17
General features
Display:B/ Display:C/ Display:D
Graphic part/ Spectrum Analyzer
Display Switching
Display:B/ Display:C/ Display:D
Wallpaper selecting
Select a wallpaper to display when Display Type is
set to "Display:B"/ "Display:C"/ "Display:D".
Switching the graphic Display/ Spectrum analyzer
display.
1 Select the wallpaper display
Refer to 'Graphic part/ Spectrum Analyzer Display
Switching' (page 18).
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is
displayed above the [4] button.
Refer to 'Notes on Multi-function Key System'
(page 10).
2 Select the wallpaper
Display the wallpapers one after another
and select one
1 Turn the wallpaper scan ON.
Press the [38] button.
Each time the button is pressed the Wallpaper
scan is turned ON and OFF.
When it’s ON, "SCAN" is displayed.
When it’s ON, each wallpaper is displayed every
several seconds.
2 Enter display control mode
Press the [4] ("DISP") button.
3 Select the display mode
Press the [2] ("MODE") button.
Select the "Display:B"/ "Display:C"/ "Display:D"
display.
2 At the wallpaper you want to display.
Press the [38] button.
4 Select the graphic/ spectrum analyzer
display
Select wallpaper manually
1 Turn the wallpaper scan OFF.
Press the [38] button.
Each time the button is pressed the Wallpaper
scan is turned ON and OFF.
2 Select the wallpaper.
Press the [FM] or [AM] button.
Each time the button is pressed the wallpaper
changes.
Press the [4] ("SA-grph") button.
5 Select the graphic/ spectrum analyzer
display part display
Press the [4] or [¢] button.
Each time the button is pressed the graphic
display/ spectrum analyzer display switches as
shown below.
Graphic display/ Spectrum Analyzer display
Movie 1
Movie 2
Downloaded movie
Spectrum analyzer 1
3 Exit Display Control mode
Press the [6] ("RTN") button.
Spectrum analyzer 5
Wallpaper
Display:B/ Display:C
Text Display Switching
6 Exit display control mode
Press the [6] ("RTN") button.
Switching the text display.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is
displayed above the [4] button.
Refer to 'Notes on Multi-function Key System'
(page 10).
•
The setting of this function is available while "Display :
B"/ "Display:C"/ "Display:D" is selected for the Display
mode.
2 Enter display control mode
Press the [4] ("DISP") button.
|
18
English
In Auxiliary input source
3 Select the display mode
Press the [2] ("MODE") button.
Select the "Display:B"/ "Display:C" display.
Information
Auxiliary input name
Date
Display
"AUX NAME"
"DATE"
4 Select the text
Press the [3] ("TEXT") button.
Clock
"CLOCk"
In Standby
•
It can also be switched by pressing either [4] or
Information
Standby (Illumination only mode) "STANDBY"
Date
Display
[¢] button.
In Tuner source
"DATE"
Clock
"CLOCK"
Information
Display
Program Service name or Frequency "BAND+ch+PS"
5 Exit Display Control mode
Press the [6] ("RTN") button.
Radio text
Date
"R-TEXT"
"DATE"
Clock
"CLOCK"
•
If the Disc title, Track title, Song title & Artist name, or
Album name & Artist name is selected when the disc
which does not have Disc title, Track title, Song title,
Album name, or Artist name is played, track number
and play time are displayed.
Displaying the frequency during Program
Service name reception
Press the [SCRL] button for at least 1 second.
The frequency for the RDS station will be
displayed for 5 seconds instead of the Program
Service name.
In CD & External disc source
Information
Display
Disc title
"DISC-TITLE"
(In External disc source)
Track title
Track number & Play time
Disc name
Date
"TRACK-TITLE"
"P-Time"
"DNPS"
"DATE"
Clock
"CLOCK"
In MP3/WMA source
Information
Song title & Artist name
Album name & Artist name
Folder name
File name
Play time & File number
Date
Display
"TITLE/ARTIST"
"ALBUM/ARTIST"
"FOLDER NAME"
"FILE NAME"
"P-Time"
"DATE"
Clock
"CLOCK"
English
|
19
General features
Auxiliary Input Display Setting
Adjustment Item
Button
[2]
[3]
[4]
[5]
Display
"ANG–"
"ANG+"
"SLD–"
"SLD+"
The panel tilts upwards.
The panel tilts downwards.
The panel slides backward.
The panel slides forward.
Selecting the display when this device is switched
to Auxiliary input source.
1 Select Auxiliary input source
Press the [SRC] button.
Select the "AUX" display.
4 Exit Panel Position Setting mode
Press the [6] ("RTN") button.
2 Enter Auxiliary input display setting mode
Press the [NAME.S] button for at least 2
seconds.
•
•
The control panel may be interfered with the shift
lever or another part depending on the angles of the
control panel.
Set the angle to avoid any interference.
When a hard rubber frame is mounted
Do not use with the panel slid in the forward
direction.
The presently selected AUX Name is blinks.
3 Select the Auxiliary input display
Press the [4] or [¢] button.
Each time the button is pressed it switches
through the below displays.
• "AUX"
• "TV"
• "VIDEO"
• "GAME"
• "PORTABLE"
• "DVD"
If so, the hard rubber frame will interfere with the
panel when the angle is adjusted downward.
No sound is produced while the panel is operating.
•
4 Exit Auxiliary input display setting mode
Press the [NAME.S] button.
Theft Deterrent Panel
The Backpanel of the unit can be detached and
taken with you, helping to deter theft.
•
•
When operation stops for 10 seconds, the name
at that time is selected, and Auxiliary input display
setting mode closes.
The Auxiliary Input Display can be set only when the
built-in auxiliary input or the auxiliary input of optional
KCA-S210A is used.
Removing the Backpanel
1 Turn the ignition OFF or press the [SRC]
button for at least 1 second.
Turn OFF the power, and the control panel
becomes horizontal.
Panel Position Setting
•
After the set time passes in 'OFF Wait Time Setting'
(page41), the panel is closed.
Setting the angle or back-forward position of the
control panel.
2 Remove the Backpanel forward.
When 'DSI (Disabled System Indicator)' (page40)
is set to ON, DSI blinks.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "PNL" is
displayed above the [5] button.
2 Enter Panel Position Setting mode
Press the [5] ("PNL") button.
3 Select the item for adjustment
Press the desired [2] — [5] button.
Each time the button is pressed the items that
can be adjusted switch as shown below.
|
20
English
2 Select the Sound type
Press the [Q] button.
Each time the button is pressed the sound
setting switches.
•
•
The back panel is a precision piece of equipment and
can be damaged by shocks or jolts. For that reason,
keep the back panel in its special storage case while
detached.
Do not expose the Backpanel or its storage case to
direct sunlight or excessive heat or humidity. Also
avoid places with too much dust or the possibility of
water splashing.
Sound setting
Natural
Rock
Pops
Easy
Display
"Natural"
"ROCK"
"POPS"
"EASY"
Reattaching the Backpanel
Top 40
Jazz
User memory
Installer
"TOP 40"
"JAZZ"
"USER"
1 Set the Backpanel to the panel bracket.
2 Hold down on the Backpanel until it is locked.
"INSTALLER"
•
•
•
User memory: The values set on the 'Audio Setup (PRO
mode)' (page 24).
Installer: The values set on the 'Audio Setup (PRO
mode)' (page 24).
Each setting value is changed with the 'Audio Setup
(PRO mode)' (page 24).
First , select the Cabin size and the speaker type with
'Audio Setup (Easy mode)' (page 24). Refer to 'Notes
on Sound Management System' (page 11).
TEL Mute
The audio system automatically mutes when a
call comes in.
Subwoofer Output
Turning the Subwoofer output ON or OFF.
When a call comes in
"CALL" is displayed.
The audio system pauses.
Press the [SW] button for at least 1 second.
Each time the button is pressed Subwoofer
output switches ON or OFF.
When it’s ON, "SUB WOOFER ON" is displayed.
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio
system comes back ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio
system comes back ON.
System Q
You can recall the best sound setting preset for
different types of music.
1 Select the source to set
Press the [SRC] button.
English
|
21
Sound management features
1 - 6
NEXT
SRC
4
¢
Audio control
5 Select the Audio Control item for
adjustment
Press the [2] — [5] button.
Each time the [2] — [5] button is pressed the
adjustable audio items are switched among
ranges of all stage section’s tables on the
following pages.
1 Select the source for adjustment
Press the [SRC] button.
2 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "AD CTRL" is
displayed above the [2] button.
Refer to 'Notes on Multi-function Key System'
(page 10).
1st section
Multi-function key operation
[2] "PLII"
[3] "WOW"
Audio control item
Dolby ProLogic II setting
SRS WOW setting
OFF setting
3 Enter Audio Control mode
Press the [2] ("AD CTRL") button.
[4] "OFF"
[5] "FINE"
[2] "PNRM"
[3] "DIM"
[4] "CT-WDTH" Center width control
Panorama setting
Dimension control
4 Select the Adjustment item section
Press the [NEXT] button.
Repeatedly press the button until the desired
Adjustment item is displayed above the [2] — [5]
button.
[2] "FOCUS" FOCUS setting
[3] "TruBass-F" SRS TruBass Front setting
[3] "TruBass-R" SRS TruBass Rear setting
[4] "SRS 3D"
SRS 3D setting
|
22
English
2nd section
Audio Control Item
Position setting
Balance setting
Fader setting
Volume offset
Range
ALL/ Front-L/ Front-R/ Front
L15 — R15
R15 — F15
-8 — 0
•
When you select the "MUSIC" using "PLII", you can set
the "PNRM", "DIM" and "CT-WDTH" using the "FINE"
function. Also, when you select the "WOW", you can
set the "FOCUS", "TruBass-F/TruBass-R", and "SRS 3D"
using the "FINE" function.
[2] "PLII"
Subwoofer level
Subwoofer Phase setting
-10 — +10
Normal/ Reverse
"MUSIC" (Music)
"MOVIE" (Movie)
"MATRIX" (Matrix)
[5] "FINE"
[2] "PNRM"
[3] "DIM"
[4] "CT-WDTH"
•
•
•
The Adjustment item can also be controlled by the
rotary volume knob. Refer to 'Rotary Volume knob
operation mode select' (page 13).
When the 'Dual Zone System' (page 14) is ON, each of
the following setup is ignored.
- "WOW"/ "PLII"/ "POSI"/ "PHASE"
[3] "WOW"
[5] "FINE"
"LOW" (Low)
[2] "FOCUS"
"MIDDLE" (Middle)
"HIGH" (High)
"USER" (User)
[3] "TruBass-F"
[3] "TruBass-R"
[4] "SRS 3D"
WOW: TruBass, FOCUS and SRS 3D are all set to values
shown below.
2nd section
WOW
HIGH
MIDDLE
LOW
FOCUS
TruBass SRS 3D
Multi-function key operation
[2] "POSI"
Audio control item
Position setting
Balance setting
Fader setting
8
6
3
4
3
2
4
2
1
[3] "BL/F"
[3] "BL"
[3] "F"
[4] "VOFF"
[5] "SW"*
Volume offset
[5] "SW LEVEL" Subwoofer level
[5] "PHASE" Subwoofer Phase setting
•
•
FOCUS: Adjusts the sound image by changing the
vertical position of the speakers virtually and
increases or decreases the soundscape.
TruBass: Assisting the playback for the super bass
sound.
•
•
•
SRS 3D: Making a natural 3D sound field.
SRS 3D cannot be set in tuner source.
The Dimension Control can be set only when the rear
speaker is ON.
The Center Width Control can be set only when the
center speaker is ON.
Before you set the "TruBass-F"/ "TruBass-R" to get
the best sound, set the speaker size using the 'Audio
Setup (Easy mode)' (page 24) function. Refer to 'Notes
on Sound Management System' (page 11).
•
•
Volume offset: Each source’s volume can be set as a
difference from the basic volume.
* You can control this item when 'Subwoofer Output'
(page 21) is set to "SUB WOOFER ON". Note that you
can control it only when "SP-LEV" is set to any item
other than "None" by 'Audio Setup (Easy mode)'
(page24).
•
•
6 Adjust the Audio Control item
Press the [4] or [¢] button.
Each time the button is pressed the setting
switches as shown below.
7 Exit Audio Control mode
Press the [6] ("RTN") button.
1st section
Audio Control Item
Dolby ProLogic II setting
SRS WOW setting
OFF setting
Panorama setting
Dimension control
Center width control
FOCUS setting
Range
MUSIC/ MOVIE/ MATRIX
LOW/ MIDDLE/ HIGH/ USER
Through/ Bypass
ON/ OFF
R3 — R1/ Neutral/ F1 — F3
0 — 7
OFF/ 1 — 9
SRS TruBass Front setting
SRS TruBass Rear setting
OFF/ 1 — 4
SRS 3D setting
OFF/ 1 — 4
English
|
23
Sound management features
Audio Setup (Easy mode)
6 Adjust the Audio setup item
Press the [4] or [¢] button.
Each time the button is pressed the setting
switches as shown below.
1 Selects the Easy mode of Audio setup
See the 'Audio Setup' (page 41) and select "Audio
Setup: Easy".
Audio setup Item
Range
2 Select the source for adjustment
Cabin setting
OFF/ Compact/ Sedan/ Wagon1/
Wagon2/ MiniVan1/ MiniVan2/ SUV/
Passenger Van
Press the [SRC] button.
3 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "AD SET" is
displayed above the [3] button.
Refer to 'Notes on Multi-function Key System'
(page 10).
Speaker select Front
Speaker select Rear
Speaker select Center
O.E.M./ 10/ 13/ 16/ 17/ 18 (cm)/
4✳
6/ 5
None/ O.E.M./ 10/ 13/ 16/ 17/ 18 (cm)/
6/ 5 7/ 6 8/ 6 9/ 7 10 (inch)
None/ 40 70 (mm)/ 5/ 10/ 13/ 16
Over (cm)
Speaker select Subwoofer 16/ 20/ 25/ 30/ 38 Over (cm)/ None
✳7/ 6✳8/ 6✳9/ 7✳10 (inch)
4
✳
✳
✳
✳
✳
✳
4 Enter Audio Setup mode
Press the [3] ("AD SET") button.
Speaker level Front Left
Speaker level Front Right
Speaker level Rear Left
Speaker level Rear Right
-10 — +10
5 Select the Audio Setup item for adjustment
Press the [2] — [5] button.
Each time the [2] — [5] button is pressed the
adjustable audio items are switched among
ranges of all stage section’s tables on the
following pages.
Speaker level Center
Speaker level Subwoofer
-10 — +10
•
•
The Adjustment item can also be controlled by the
rotary volume knob. Refer to 'Rotary Volume knob
operation mode select' (page 13).
You can select the Speaker level only when you have
set the speaker to anything other than "None" using
the "SP-SEL".
Multi-function key operation
[2]
"CABIN"
Audio setup item
Cabin setting
[3]
[2] "FRONT"
[3] "REAR"
[4] "CNTR"
[5] "SW"
Speaker select Front
Speaker select Rear
Speaker select Center
Speaker select Subwoofer
"SP-SEL
"
7 Exit Audio setup mode
Press the [6] ("RTN") button.
[4]
[2] "FRONT" [2] "Front-L"
Speaker level Front Left
"
SP-LEV
"
[2] "Front-R" Speaker level Front Right
[3] "REAR" [3] "Rear-L"
Speaker level Rear Left
Speaker level Rear Right
Speaker level Center
[3] "Rear-R"
[4] "CT/SW" [4] "Center"
[4] "Sub Woofer" Speaker level Subwoofer
Speaker level Test tone
[5] "T-TONE"*
[2] "USER"
[5]
Call User
"CALL" [3] "INST"
Call Insttaller
Audio Setup (PRO mode)
1 Selects the PRO mode of Audio setup
See the 'Audio Setup' (page 41) and select "Audio
Setup: PRO".
•
•
You can recall the value you have adjusted in the
Audio setup PRO mode by selecting the "CALL". Refer
to 'Audio Setup memory Recall' (page 26).
* You can listen to the "T-TONE" when you have
tuned it. The sound level is reduced when "T-TONE"
is selected. The sound returns to the normal level
when the original source is selected.
2 Select the Audio Setup item for adjustment
Select an audio setup item you wish to adjust by
referring to Step 2-5 of 'Audio Setup (Easy mode)'
(page 24).
|
24
English
1st section
2nd section
Multi-function key operation
Audio setup Item
Multi-function key operation
Audio setup item
[2]
[2] "FRONT"
High Pass Filter Front
High Pass Filter Rear
High Pass Filter Center
Low Pass Filter Subwoofer
Subwoofer Phase setting
[2]
[2] "USER"
User Memory
User Insttaller
"X’Over" [3] "REAR"
[4] "CNTR"
"MEMORY" [3] "INST"
[3]
"CALL"
[2] "USER"
[3] "INST"
Call User
Call Insttaller
[5] "SW"
[5] "PHASE"
[3]
[2] "FRONT"
DTA Front
DTA Rear
DTA Center
DTA Subwoofer
"DTA" [3] "REAR"
[4] "CNTR"
•
You can store an adjusted audio setup value by
selecting "MEMORY". Also, you can recall it by
selecting "CALL". Refer to 'Audio Setup memory Recall'
(page 26).
[5] "SW"
[4]
"EQ"
[2] "FRONT" [2] "BASS"* EQ Front Bass setting
[3] "MID"*
[4] "TRE"*
EQ Front Middle setting
EQ Front Treble setting
3 Adjust the Audio setup item
Press the [4] or [¢] button.
Each time the button is pressed the setting
switches as shown below.
[3] "REAR" [2] "BASS"* EQ Rear Bass setting
[3] "MID"*
[4] "TRE"*
EQ Rear Middle setting
EQ Rear Treble setting
[4] "CNTR" [2] "BASS"* EQ Center Bass setting
[3] "MID"*
[4] "TRE"*
EQ Center Middle setting
EQ Center Treble setting
Adjustment Item
Range
Through/30 — 250 (Hz)
High Pass Filter Front
High Pass Filter Rear
High Pass Filter Center
Low Pass Filter Subwoofer
Subwoofer Phase setting
[5]
"SP-
[2] "FRONT" [2] "Front-L" SP-LEV Front Left
[2] "Front-R" SP-LEV Front Right
LEV" [3] "REAR" [3] "Rear-L"
[3] "Rear-R" SP-LEV Rear Right
[4] "CT/SW" [4] "Center SP-LEV Center
SP-LEV Rear Left
30 — 250 (Hz)
Normal/ Reverse
0 — 610 (cm)
"
[4] "Sub Woofer" SP-LEV Subwoofer
[5] "T-TONE" SP-LEV Test tone
DTA Front/DTA Rear/
DTA Subwoofer
2
*
DTA Center
0 — 170 (cm)
Bass Center Frequency
Middle Center Frequency
Treble Center Frequency
Bass Level/ Middle Level/
Treble Level
60 — 400 (Hz)
•
* The followings can be adjusted each time button [2]
"BASS", button [3] "MID" or button [4] "TRE" of "EQ"
functions is pressed.
[2]"BASS" : "BASS F" (Bass Center Frequency)
"BASS L" (Bass Level)
"BASS Q" (Bass Q Factor)
[3]"MID" : "MID F" (Middle Center Frequency)
"MID L" (Middle Level)
500 (Hz) — 3.15 (KHz)
4.00 (kHz) — 16.00 (KHz)
-9 — +9 dB
Bass Q Factor/ Middle Q Factor/
Treble Q Factor
SP-LEV Front Left/SP-LEV Front Right -10 — +10
SP-LEV Rear Left/SP-LEV Rear Right
0.25/ 0.50/ 1.00/ 2.00
"MID Q" (Middle Q Factor)
[4]"TRE" : "TRE F" (Treble Center Frequency)
"TRE L" (Treble Level)
SP-LEV Center/ SP-LEV Subwoofer
"TRE Q" (Treble Q Factor)
•
*2 You can listen to the "T-TONE" when you have
tuned it. The sound level is reduced when "T-TONE"
is selected. The sound returns to the normal level
when the original source is selected.
X'over (Crossover Network Setup)
You can manually set a crossover frequency of
speakers.
DTA (Digital Time Alignment)
Manually set the sound output timing of each
channel.
•
•
The Adjustment item can also be controlled by the
rotary volume knob. Refer to 'Rotary Volume knob
operation mode select' (page 13).
To get the best sound, first set the "CABIN" and "SP-
SEL" parameters using the 'Audio Setup (Easy mode)'
(page 24). Refer to 'Notes on Sound Management
System' (page 11).
When the 'Dual Zone System' (page 14) is ON, each of
the following setup is ignored.
- "X'over"/ "EQ" / "DTA"
•
•
•
•
•
EQ (Equalizer)
You can manually set the equalizer curve.
SP-LEV (Speaker Level)
4 Exit Audio setup mode
Press the [6] ("RTN") button.
Set the volume at each setup position.
English
|
25
Sound management features
Audio Setup Memory (PRO mode)
Audio Setup memory Recall
1 Selects the PRO mode of Audio setup
See the 'Audio Setup' (page 41) and select "Audio
Setup: PRO".
1 Enter Audio Setup mode
Press the [3] ("AD SET") button.
2 Select the Recall section
Press the [NEXT] button.
Repeatedly press the button until "CALL" is
displayed above the [3]/[5] button.
2 Select the source for adjustment
Press the [SRC] button.
3 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "AD SET" is
displayed above the [3] button.
Refer to 'Notes on Multi-function Key System'
(page 10).
3 Call the Audio setup memory and select an
item to call the memory value
Press the [3]/ [5] ("CALL") button.
•
If you have set the Audio Setup to "Audio Setup: PRO"
using 'Audio Setup' (page 41), press button [3]. If you
have set the Audio Setup to "Audio Setup: Easy", press
button [5].
4 Enter Audio Setup mode
Press the [3] ("AD SET") button.
5 Select the Adjustment item section
Press the [NEXT] button.
Repeatedly press the button until the desired
Adjustment item is displayed above the [2] — [5]
button.
4 Recalls the value from memory
Press the [2] ("USER")/ [3] ("INST") button.
5 Exit Audio Setup mode
Press the [6] ("RTN") button.
6 Select the Audio Setup item for adjustment
Press the [2] — [5] button.
Adjust the audio setup by referring to the 'Audio
Setup (PRO mode)' (page 24).
7 Select the Memory item section
Press the [NEXT] button.
Repeatedly press the button until "MEMORY" is
displayed above the [2] button.
8 Select the Memory item
Press the [2] ("MEMORY") button.
9 Stores the adjusted audio setup value in
memory
Press the [2] ("USER")/ [3] ("INST") button for
at least 2 seconds.
The "MEMORY" display blinks 1 time.
"USER": The values are erased from memory if the
battery is removed or if the reset button
is pressed.
"INST": The values are held in memory even if the
battery is removed or if the reset button
is pressed.
10 Exit Audio Setup mode
Press the [6] ("RTN") button.
|
26
English
Tuner/TV control features
1 - 6
NEXT
SRC
AM
FM
4
¢
Preset station
number
Band display
Frequency display
Function of remote
Tuning
Direct Access Tuning
Selecting the station.
Entering the frequency and tuning.
1 Select tuner source
Press the [SRC] button.
Select the "TUNER" display.
1 Select the band
Press the [FM] or [AM] button.
2 Select the band
2 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
"– – – –" is displayed.
Press the [FM] or [AM] button.
Each time the [FM] button is pressed it switches
between the FM1, FM2, and FM3 bands.
3 Enter the frequency
Press the number buttons on the remote.
Example:
3 Tune up or down band
Press the [4] or [¢] button.
Desired frequency
92.1 MHz (FM)
810 kHz (AM)
Press button
[0], [9], [2], [1]
[0], [8], [1], [0]
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
English
|
27
Tuner/TV control features
Station Preset Memory
Preset Tuning
Putting the station in the memory.
Calling up the stations in the memory.
1 Select the band
Press the [FM] or [AM] button.
1 Select the band
Press the [FM] or [AM] button.
2 Select the frequency to put in the memory
Press the [4] or [¢] button.
2 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "[1]" — "[6]" are
displayed above the [1] — [6] buttons.
Refer to 'Notes on Multi-function Key System'
(page 10).
3 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "[1]" — "[6]" are
displayed above the [1] — [6] buttons.
Refer to 'Notes on Multi-function Key System'
(page 10).
3 Call up the station
Press the desired [1] — [6] button.
4 Put the frequency in the memory
Press the desired [1] — [6] button for at least
2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the
memory on each [1] — [6] button.
Function of Remote
SNPP (Station Name Preset Play)
Displaying the program service name and
selecting the station.
Auto Memory Entry
Putting a station with good reception in the
memory automatically.
1 Enter SNPP mode
Press the [DNPP] button on the remote.
When "SNPP" is displayed, the program service
name displays in the FM1, FM2, FM3 and AM
band in order.
1 Select the band for Auto Memory Entry
Press the [FM] or [AM] button.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
•
For stations without a program service name the
frequency is displayed instead.
3 Select the Auto Memory Entry mode
Press the [FM] or [AM] button.
Select the "Auto Memory" display.
Changing the display order
Press the [4] or [¢] button.
Changing the displayed band
Press the [FM] or [AM] button.
4 Open Auto Memory Entry
Press the [4] or [¢] button for at least 2
seconds.
When 6 stations that can be received are put in
the memory Auto Memory Entry closes.
2 If the station you want is displayed
Press the [OK] button on the remote.
The station for the program service name being
displayed is received.
Canceling the SNPP mode
Press the [DNPP] button on the remote.
•
•
When the 'AF (Alternative Frequency)' (page 42) is ON,
only RDS stations are put in the memory.
When Auto Memory Entry is done in the FM2 band,
the RDS stations preset in the FM1 band aren’t put in
the memory.
Likewise, when it is done in the FM3 band, RDS
stations preset in FM1 or FM2 aren’t put in the
memory.
|
28
English
Function of LX BUS Television
TV Tuning
The TV channel of a connected LX BUS Television
(optional accessory) can be selected.
The action depends on the setting of the
connected LX BUS Television. Refer to the user
instruction of the LX BUS Television for details.
1 Select TV source
Press the [SRC] button.
Select the "TV" display.
2 Select the TV band and Video input
Press the [FM] button.
Each time the [FM] button is pressed TV bands
and Video input switch.
3 Select the TV channel
Press the [4] or [¢] button.
Function of LX BUS Television
Preset TV Tuning
Calling up the TV channels in the memory.
1 Select the TV band
Press the [FM] button.
2 Call up the TV channel
Press the desired [1] — [6] button.
English
|
29
RDS features
1 - 6
PTY
TI
SCRL AM
FM
4
¢
Frequency display
Radio text
Traffic Information
Radio Text Scroll
Switching to traffic information automatically
when a traffic bulletin starts even when you aren’t
listening to the radio.
Scrolling the displayed radio text.
Press the [SCRL] button.
Press the [TI] button.
Each time the button is pressed the Traffic
Information function turns ON or OFF.
When it’s ON, "Traffic Info"/ "Announcement" is
displayed.
PTY (Program Type)
Selecting the Program Type and searching for a
station.
When a traffic bulletin starts, "Traffic Info"/
"Announcement" is displayed it and it switches to
traffic information.
1 Enter PTY mode
Press the [PTY] button.
•
This function can’t be used during a traffic bulletin or
AM reception.
•
•
During reception of an AM station when the Traffic
Information function is turned ON, it switches to an
FM station.
During reception of traffic information the adjusted
volume is automatically remembered, and the next
time it switches to traffic information it’s automatically
the remembered volume.
2 Select the Program Type
Press the [FM] or [AM] button.
Each time the button is pressed the Program
Type switches as shown below.
|
30
English
No.
1.
2.
Program Type
Speech
Music
Display
"All Speech"
"All Music"
•
When the selected Program Type isn’t found, "NO PTY"
is displayed. Select another Program Type.
3.
News
"News"
4.
5.
6.
Current Affairs
Information
Sport
"Current Affairs"
"Information"
"Sport"
4 Exit PTY mode
Press the [PTY] button.
7.
8.
Education
Drama
"Education"
"Drama"
9.
Culture
"Cultures"
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
Science
Varied
"Science"
Program Type preset
"Varied Speech"
"Pop Music"
"Rock Music"
"Easy Listening M"
"Light Classic M"
"Serious Classics"
"Other Music"
"Weather & Metr"
"Finance"
Putting the Program Type in the Preset button
memory and calling it up quickly.
Pop Music
Rock Music
Easy Listening Music
Light Classical
Serious Classical
Other Music
Weather
Presetting the Program Type
1 Select the Program Type to preset
Refer to 'PTY (Program Type)' (page 30).
2 Preset the Program Type
Press the desired [1] — [6] button for at least
2 seconds.
Finance
Children's programs
Social Affairs
Religion
Phone In
Travel
"Children's Prog"
"Social Affairs"
"Religion"
Calling up the preset Program Type
"Phone In"
1 Enter PTY mode
Refer to 'PTY (Program Type)' (page 30).
"Travel & Touring"
"Leisure & Hobby"
"Jazz Music"
"Country Music"
"National Music"
"Oldies Music"
"Folk Music"
"Documentary"
Leisure
2 Call up the Program Type
Press the desired [1] — [6] button.
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary
•
Speech and Music include the Program type shown
below.
Music: No.12 — 17, 26 — 30
Speech: No.3 — 11, 18 — 25, 31
•
•
The Program Type can be put in the [1] — [6] button
memory and called up quickly. Refer to the 'Program
Type preset' (page 31).
The display language can be changed. Refer to
'Changing Language for PTY Function' (page 32).
3 Search for the selected Program Type
station
Press the [4] or [¢] button.
When you want to search for other stations press
the [4] or [¢] button again.
English
|
31
RDS features
Changing Language for PTY
Function
Selecting the Program Type display language.
1 Enter PTY mode
Refer to 'PTY (Program Type)' (page 30).
2 Enter Changing Language mode
Press the [SCRL] button.
3 Select the language
Press the [FM] or [AM] button.
Each time the button is pressed the language
switches as shown below.
Language
English
Spanish
Display
"English"
"Spanish"
"French"
French
Dutch
"Dutch"
Norwegian
Portuguese
Swedish
German
"Norwegian"
"Portuguese"
"Swedish"
"German"
4 Exit Changing Language mode
Press the [SCRL] button.
|
32
English
CD/MP3/WMA/External disc control features
2 - 5
NEXT
SRC
38
SCRL/ AM/ FM/
NAME.S DISC- DISV+
4
¢
Track number
Track time
Eject the disc
Playing CD & MP3/WMA
1 Eject the disc
When there is no disc inserted
Press the [0] button.
1 Open the panel to insert disc
Press the [0] button.
2 Insert a disc.
2 Return the panel to the original position
Press the [0] button.
•
•
3 in. (8cm) disc can’t be played. Using an adapter and
inserting them into this unit can cause damage.
•
•
When the faceplate has been slid open, it might
interfere with the shift lever or something else. If this
happens, pay attention to safety and move the shift
lever or take an appropriate action, then operate the
unit.
The MP3/WMA media that this unit can play are CD-
ROM, CD-R, and CD-RW.
The medium formats must be ISO 9660 Level 1, Level
2, Joliet, or Romeo. The methods and precautions to
be followed for writing MP3/WMA data are covered
in 'Notes on playing MP3/WMA' (page 8). Check that
section before creating your MP3/WMA media.
The sound will be temporarily muted while the
faceplate is moving.
When a disc is inserted
Press the [SRC] button.
Select the "Compact Disc" display.
Pause and play
Press the [38] button.
Each time the button is pressed the song pauses
or plays.
English
|
33
CD/MP3/WMA/External disc control features
Function of remote
Playing External Disc
Direct Track/File Search
Playing discs set in the optional accessory disc
player connected to this unit.
Doing Track/File Search by entering the track/file
number.
Press the [SRC] button.
Select the display for the disc player you want.
Display examples:
1 Enter the track/file number
Press the number buttons on the remote.
Display
Disc player
CD player
CD changer
MD changer
2 Do Track/File Search
"Compact Disc"
"CD Changer"
"MD Changer"
Press the [4] or [¢] button.
Canceling Direct Track/File Search
Press the [38] button.
Pause and play
Press the [38] button.
Each time the button is pressed it pauses and
plays.
Function of disc changers with remote
Direct Disc Search
Doing Disc Search by entering the disc number.
•
The functions that can be used and the information
that can be displayed will differ depending on the
external disc players being connected.
1 Enter the disc number
Press the number buttons on the remote.
2 Do Disc Search
Press the [DISC+] or [DISC–] button.
Canceling Direct Disc Search
Press the [38] button.
Fast Forwarding and Reversing
Fast Forwarding
Hold down on the [¢] button.
Release your finger to play the disc at that point.
Reversing
Hold down on the [4] button.
Release your finger to play the disc at that point.
Track/File/Disc/Folder Repeat
Replaying the song, disc in the Disc changer or
MP3/WMA folder you’re listening to.
Track/File Search
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "REP" is
displayed above the [4] button.
Refer to 'Notes on Multi-function Key System'
(page 10).
Searching for a song on the disc or in the MP3/
WMA folder.
Press the [4] or [¢] button.
2 Turn ON/OFF the Repeat Play
Press the [4] ("REP") button.
Each time the button is pressed the Repeat Play
switches as shown below.
Function of disc changer/ MP3/ WMA
Disc Search/Folder Search
Selecting the disc set in the Disc changer or the
folder recorded on the MP3/WMA media.
Press the [DISC–] or [DISC+] button.
|
34
English
In CD & External disc source
2 Turn ON/OFF the Random Play
Press the [3] ("RDM") button.
Each time the button is pressed Random Play
turns ON or OFF.
Repeat play
Display
Track Repeat
(In Disc Changer)
"Repeat ON"
"Track Repeat ON"
When it’s ON, "Random ON" is displayed.
Disc Repeat (In Disc Changer)
OFF
"Disc Repeat ON"
"Repeat OFF"
•
When the [¢] button is pressed, the next song
select starts.
In MP3/WMA source
Repeat play
File Repeat
Folder Repeat
OFF
Display
"File Repeat ON"
"Folder Repeat ON"
"Repeat OFF"
Function of disc changer
Magazine Random Play
Scan Play
Play the songs on all the discs in the disc changer
in random order.
Playing the first part of each song on the disc
or MP3/WMA folder you are listening to and
searching for the song you want to listen to.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "M.RDM" is
displayed above the [5] button.
Refer to 'Notes on Multi-function Key System'
(page 10).
1 Select the key function section
Press the [NEXT] button.
Repeat to press the button until "SCAN" is
displayed above the [2] button.
Refer to 'Notes on Multi-function Key System'
(page 10).
2 Turning ON/OFF the Magazine Random Play
Press the [5] ("M.RDM") button.
Each time the button is pressed the Magazine
Random Play turns ON or OFF.
2 Start Scan Play
Press the [2] ("SCAN") button.
"Scan ON" is displayed.
When it’s ON, "M.Random ON" is displayed.
3 Release it when the song you want to listen
to is played
Press the [2] button.
•
When the [¢] button is pressed, the next song
select starts.
Random Play
Play all the songs on the disc or MP3/WMA folder
in random order.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "RDM" is
displayed above the [3] button.
Refer to 'Notes on Multi-function Key System'
(page 10).
English
|
35
CD/MP3/WMA/External disc control features
Function of MP3/WMA
Canceling the Folder Select mode
Press the [3] ("EXIT") button.
Folder Select
Quickly selecting the folder you want to listen to.
1 Select the key function section
Press the [NEXT] button.
Disc Naming (DNPS)
Attaching a title to a CD.
Repeatedly press the button until "FSEL" is
displayed above the [5] button.
Refer to 'Notes on Multi-function Key System'
(page 10).
1 Play the disc you want to attach a name to
•
•
A title can’t be attached to MD or MP3/WMA media.
Refer to the 'Text Display Switching' (page 16/18) and
select the "DNPS" display. No name can be attached
to the source if "DNPS" cannot be selected for it.
2 Enter Folder Select mode
Press the [5] ("FSEL") button.
"FOLDER SELECT" is displayed.
During Select mode the folder information is
displayed as shown below.
2 Enter name set mode
Press the [NAME.S] button for at least 2
seconds.
Folder name display
Displays the current folder name.
"NAME SET" is displayed.
3 Move the cursor to the enter character
position
Press the [4] or [¢] button.
Folder number display
Displays the number in the folder
belonging to the currently selected folder.
4 Select the character type
Press the [2] — [4] button.
Each time the button is pressed the character
type switches as shown below.
3 Select the folder level
Press the [FM] or [AM] button.
With the [FM] button you move 1 level down and
with the [AM] button 1 level up.
Character type
Button
Alphabet (Upper case/ Lower case)
Numbers and symbols
[2] ("A • a")
[3] ("1")
Selecting a folder in the same level
Press the [4] or [¢] button.
With the [4] button you move to the previous
folder, and with the [¢] button to the next
folder.
Special characters (Accent characters)
[4] ("CHAR")
5 Select the characters
Press the [FM] or [AM] button.
Returning to the top level
Press the [4] ("HOME") button.
•
Characters can be entered by using a remote with a
number button.
Example: If "DANCE" is entered.
Scrolling the folder name display
Press the [SCRL] button.
Character
"D"
"A"
"N"
"C"
Button
[3]
[2]
[6]
[2]
Times pressed
1
1
2
3
2
4 Decide the folder to play
Press the [2] ("OK") button.
The Folder Select mode releases, and the MP3/
WMA in the folder being displayed is played.
"E"
[3]
6 Repeat steps 3 through 5 and enter the name.
•
The methods for moving to other folders in the folder
select mode are different from those in the folder
search mode.
7 Exit name set mode
Press the [NAME.S] button.
See 'Notes on playing MP3/WMA' (page 8) for details.
|
36
English
•
•
When operation stops for 10 seconds the name at
that time is registered, and Name Set mode closes.
Media that you can attach names to
- Internal CD player: 30 discs.
- External CD changer/ player: Varies according to the
CD changer/ player. Refer to the CD changer/ player
manual.
•
The name of a CD can be changed by the same
operation you used to name it.
Text/Title Scroll
Scrolling the displayed CD text or MD title.
Press the [SCRL] button.
Function of disc changers with remote
DNPP (Disc Name Preset Play)
Selecting the CD displayed in the DNPS of the
CDs set in the Disc changer.
1 Enter DNPP mode
Press the [DNPP] button on the remote.
When "DNPP" is displayed the DNPS display in
order.
Forward / Reverse display
Press the [DISC–] or [DISC+] button.
2 When the disc you want is displayed
Press the [OK] button on the remote.
The disc being displayed is played.
Canceling the DNPP mode
Press the [DNPP] button on the remote.
English
|
37
Menu system
SRC
MENU
AM
FM
4
¢
Menu display
Menu System
4 Exit Menu mode
Press the [MENU] button.
Setting during operation beep sound etc.
functions.
The Menu system basic operation method is
explained here. The reference for the Menu items
and their setting content is after this operation
explanation.
•
When other items that are applicable to the basic
operation method above are displayed afterwards
their setting content chart is entered. (Normally the
uppermost setting in the chart is the original setting.)
Also, the explanation for items that aren’t applicable
('Manual Clock Adjustment' etc.) are entered step by
step.
1 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
2 Select the menu item
Press the [FM] or [AM] button.
Example: When you want to set the beep sound
select the "Beep" display.
In Standby mode
Security Code
Because authorization by the Security Code is
required when it’s removed from the vehicle,
personalizing this unit is by using the Security
Code is a help in preventing theft.
3 Set the menu item
Press the [4] or [¢] button.
Example: When "Beep" is selected, each time the
button is pressed it switches "Beep: ON"
or "Beep: OFF". Select 1 of them as the
setting.
You can continue by returning to step 2 and
setting other items.
|
38
English
Number of times the
Input prohibited time
incorrect code was input
•
When the Security Code function is activated it can’t be
released.
Note, your Security Code is the 4 digit number entered in
your "Car Audio Passport" in this package.
1
2
3
4
—
5 minutes
1 hour
24 hours
1 Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "Security" is displayed.
Touch Sensor Tone
Setting the operation check sound (beep sound)
ON/OFF.
3 Enter Security Code mode
Press the [4] or [¢] button for at least 1
second.
Display
Setting
"Beep: ON"
"Beep: OFF"
Beep is heard.
Beep canceled.
When "ENTER" is displayed, "CODE" is displayed.
4 Select the digits to enter
Press the [4] or [¢] button.
5 Select the Security Code numbers
Press the [FM] or [AM] button.
Manual Clock Adjustment
6 Repeat steps 4 and 5, and complete the
Security Code.
•
This adjustment can be done when the 'Synchronize
Clock' (page 40) is set as OFF.
7 Confirm the Security Code
Press the [¢] button for at least 3 seconds.
When "RE-ENTER" is displayed, "CODE" is
displayed.
1 Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "Clock Adjust" display.
8 Do the step 4 through 7 step operation, and
reenter the security code.
"APPROVED" is displayed.
2 Enter Clock Adjust mode
Press the [4] or [¢] button for at least 1
second.
The Security Code function activates.
The clock display blinks.
3 Adjust the hours
Press the [FM] or [AM] button.
•
If you enter a Code different from your Security Code,
you have to start over from step 4.
Adjust the minutes
Press the [4] or [¢] button.
Press the Reset button and when it’s removed
from the battery power source
1 Turn the power ON.
2 Do the step 4 through 7 step operation, and
reenter the security code.
4 Exit Clock adjustment mode
Press the [MENU] button.
"APPROVED" is displayed.
The unit can be used.
•
If an incorrect code is input, "WAITING" is displayed,
and the input prohibited time shown below is
generated.
After the input prohibited time lapses, "CODE" is
displayed, and input can be done.
English
|
39
Menu system
Date Adjustment
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the
faceplate is removed, warning potential thieves.
1 Select Date Adjust mode
Press the [FM] or [AM] button.
Select the "Date Adjust" display.
Display
Setting
"DSI: ON"
"DSI: OFF"
LED flashes.
LED OFF.
2 Enter Date Adjust mode
Press the [4] or [¢] button for at least 1
second.
The date display blinks.
3 Selecting the item (day, month, or year) to
adjust
Press the [4] or [¢] button.
The items that are blinking are items that can be
adjusted.
Selectable Illumination
Selecting the button illumination color as green
or red.
Display
Setting
"Button: Green"
"Button: Red"
The illumination color is green.
The illumination color is red.
4 Adjust each item
Press the [FM] or [AM] button.
5 Repeat step 3 and 4 operation and adjust the
date.
6 Exit Date adjustment mode
Press the [MENU] button.
Triangle indicator setting
Sets the blinking mode during triangle indicator
system adjustment (such as audio control, audio
setup, multi-key system setup).
Date Mode
Display
"TRIAGL Blink:ON"
"TRIAGL Blink:OFF"
Setting
Setting the date format.
The Triangle indicator blinks.
The Triangle indicator does not blink.
1 Select Date Mode
Press the [FM] or [AM] button.
Select the "Date Mode" display.
Font Type Select
2 Select the date format
Press the [4] or [¢] button.
Selecting the display font.
1 Select Font Type Select Mode
Press the [FM] or [AM] button.
Select the "Font Select" display.
Synchronize Clock
2 Select the font
Press the [4] or [¢] button.
Synchronizing the RDS station time data and this
unit’s clock.
Display
Setting
"SYNC: ON"
"SYNC: OFF"
Synchronizes the time.
Adjust the time manually.
Dimmer
Dimming this unit’s display automatically when
the vehicle light switch is turned ON.
•
It takes 3 to 4 minutes to synchronize the clock.
Display
Setting
"Dimmer: ON"
"Dimmer: OFF"
The display dims.
The display doesn’t dim.
|
40
English
OFF Wait Time Setting
Audio Setup
Switches between the Easy mode and PRO mode (for detailed setup)
during Audio setup.
Setting the time until the faceplate hide
operation starts after the power is turned OFF.
The faceplate can be removed only during the set
time period.
Display
Setting
"Audio Setup:Easy" Selects the quick Audio setup.
"Audio Setup:PRO" Selects the detailed Audio setup.
Display and Setting
"Off Wait : 0sec"
•
Refer to 'Audio Setup (Easy)' (page 24) and 'Audio
Setup (PRO)' (page 24).
"Audio Setup:Easy" : [CABIN] [SP-SEL] [SP-LEV] [CALL]
"Audio Setup:PRO" : [X’over] [DTA] [EQ] [SP-LEV]
[MEMORY] [CALL]
"Off Wait : 3sec" (Original setting)
"Off Wait : 25sec"
In Standby mode
In Standby mode
Eject angle setting
Built-in Amp Mute Setting
This function sets the opening and closing
operation of a panel when a disc is inserted and
when it is ejected.
Toggles ON or OFF the mute control on the built-
in amplifier.
Turning ON this control enhances the preout
quality.
Display
Setting
"Eject ANG: Slope" Opens and closes the panel while maintaining
the angle of the control panel to the set angle.
Display
"AMP Mute: OFF"
"AMP Mute: ON"
Setting
The built-in amplifier activates.
The built-in amplifier deactivates.
"Eject ANG: Level" Opens and closes the panel after setting the
angle of the control panel to the horizontal
position.
B.M.S. (Bass Management System)
In Standby mode
Adjust the bass boost level of the external
amplifier using the main unit.
Panel action setting
Sets the panel movement when the panel action
(back/forward movement) is set to its most end
position.
Display
Setting
Bass boost level is flat.
Bass boost level is low (+6dB).
Bass boost level is mid (+12dB).
Bass boost level is high (+18dB).
"AMP Bass: Flat"
"AMP Bass: +6"
"AMP Bass: +12"
"AMP Bass: +18"
Display
Setting
"Panel Control:1" No angle can be adjusted if the panel position
has been set to its most end position. Also, if you
have set the angle below the horizontal position,
the angle is set to horizontal when you set the
panel to its most end position.
"Panel Control:2" The angle can be adjusted regardless of the
panel position.
•
•
Refer to the catalog or instruction manual for power
amplifiers that can be controlled from this unit.
For amplifiers there are the model that can be set
from Flat to +18 dB, and the model that can be set
from Flat to +12 dB.
When an amplifier that can only be set to +12 is
connected to the unit, "AMP Bass: +18" won’t work
correctly even if it’s selected.
English
|
41
Menu system
In Tuner mode
B.M.S. Frequency Offset
Tuning Mode
Setting the central frequency boosted by B.M.S.
Sets the tuning mode.
Display
Setting
"AMP FRQ: Normal"
"AMP FRQ: Low"
Boost with the normal central frequency.
Drop the normal central frequency 20%.
Tuning mode Display
Operation
Auto seek
"Seek mode: Auto 1" Automatic search for a
station.
Preset station "Seek mode: Auto 2" Search in order of the stations
seek
in the Preset memory.
Manual
"Seek mode: Manual" Normal manual tuning
control.
News Bulletin with Timeout Setting
It switches automatically when a news bulletin
starts even if the radio isn’t being listened to. Also,
the time interval when interrupt is prohibited can
be set.
Display and Setting
"News: OFF"
In Tuner mode
"News: 00min"
Auto Memory Entry
For the operation method refer to 'Auto Memory
Entry' (page 28).
"News: 90min"
When "News: 00min" — "News: 90min" is set, the
News Bulletin Interrupt function is ON.
When the news bulletin starts, "News " is
displayed, and it switches to the news bulletin.
AF (Alternative Frequency)
When poor reception is experienced,
automatically switch to another frequency
broadcasting the same program in the same RDS
network with better reception.
•
If you choose the "20min" setting, further news
bulletins will not be received for 20 minutes once the
first news bulletin is received.
The news bulletin volume is the same level that was
set for 'Traffic Information' (page 30).
This function is only available if the desired station
sends PTY-code for news bulletin or belongs to
'Enhanced Other Network'-Network sending PTY-code
for news bulletin.
•
•
Display
"AF: ON"
"AF: OFF"
Setting
The AF function is ON.
The AF function is OFF.
•
When the News Bulletin Interrupt function is ON, it
switches to an FM station.
•
When no other stations with stronger reception are
available for the same program in the RDS network,
you may hear the incoming broadcast in bits and
snatches. Turn OFF the AF function in such a case.
In Tuner mode
Local Seek
Only stations whose reception is good are
searched for in auto seek tuning.
Display
Setting
"Local Seek: OFF"
"Local Seek: ON"
The local seek function is OFF.
The local seek function is ON.
|
42
English
Restricting RDS Region (Region
Restrict Function)
Text Scroll
Setting the displayed text scroll.
You can choose whether or not to restrict the
RDS channels, received with the AF function for a
particular network, to a specific region.
Display
"Scroll: Manual"
"Scroll: Auto"
Setting
Doesn’t scroll.
Scrolls when the display changes.
Display
Setting
"Regional: ON"
"Regional: OFF"
The Region Restrict Function is ON.
The Region Restrict Function is OFF.
•
The text scrolled is shown below.
- CD text
- Folder name/ File name/ Song title/ Artist name/
Album name
- MD title
- Radio text
•
Sometimes stations in the same network broadcast
different programs or use different program service
names.
Auto TP Seek
Built-in Auxiliary input Setting
When the TI function is ON and poor reception
conditions are experienced when listening to
a traffic information station, another traffic
information station with better reception will be
searched for automatically.
Set the Built-in Auxiliary Input function.
Display
Setting
"Builtin AUX: OFF" When selecting the source there’s no Auxiliary
Input.
"Builtin AUX: ON" When selecting the source there’s Auxiliary
Input.
Display
"ATPS: ON"
"ATPS: OFF"
Setting
The Auto TP Seek Function is ON.
The Auto TP Seek Function is OFF.
In Standby mode
In FM reception
CD Read Setting
Monaural Reception
When there is a problem on playing a CD with
special format, this setting play the CD by force.
Noise can be reduced when stereo broadcasts are
received as monaural.
Display
"CD READ: 1"
"CD READ: 2"
Setting
Play CD and MP3/WMA.
Play CD by force.
Display
"MONO: OFF"
"MONO: ON"
Setting
The monaural reception is OFF.
The monaural reception is ON.
•
Setting "CD READ: 2" cannot play MP3/WMA.
Some music CDs may not be played back even in the
"CD READ: 2" mode.
English
|
43
Menu system
In Standby mode
8 Exit the downloading mode
Press the [MENU] button.
Picture downloading
Downloading movies and wallpapers.
Downloaded pictures can be used for the display
of this unit.
•
•
The number of files that can be downloaded.
- Downloaded movie: 1 file
- Wallpaper: 1 file
When a new movie is downloaded, it is overwritten to
the currently downloaded movie.
Also, when a new wallpaper is downloaded, it is
overwritten to the currently downloaded wallpaper.
There is no way to delete the downloaded pictures.
The downloaded pictures can be used for display.
'Graphic part/ Spectrum Analyzer Display Switching'
(page 18)
1 Inset a CD-R/CD-RW.
Insert a CD-R/CD-RW containing files to be
downloaded into this unit.
Refer to 'Playing CD & MP3/WMA' (page 33) for
details.
Our URL http://www.kenwood.net-disp.com
describes how to make CD-R/CD-RW.
•
•
'Wallpaper selecting' (page 18)
2 Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
When you can’t download the pictures to this unit,
there may be a problem with the CD-R/CD-RW write
method.
and rewrite the CD-R/CD-RW.
3 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
4 Select the downloading mode
Press the [FM] or [AM] button.
Select the "DISP Data DL" display.
When LX AMP unit connecting
5 Enter the downloading mode
Press the [4] or [¢] button.
"File Check!!" is displayed.
AMP Control
You can control the LX AMP connected to the
unit.
6 Select files to be downloaded
Press the [FM] or [AM] button.
1 Select AMP Control mode
Press the [FM] or [AM] button.
Select the "AMP Control" display.
7 Start downloading
Press the [4] or [¢] button for at least 2
seconds.
"Downloading" is displayed.
When the downloading finishes, "Finished
Download" is displayed.
2 Enter AMP Control mode
Press the [4] or [¢] button for at least 1
second.
3 Select the AMP Control item for adjustment
Press the [FM] or [AM] button.
•
Picture download may take as long as 10 minutes.
•
For the details of the AMP Control item, see the
Instruction manual attached to the LX AMP.
4 Adjust the AMP Control item
Press the [4] or [¢] button.
Gradation Level
5 Exit AMP Control mode
Press the [MENU] button.
Canceling Downloading
Press the [MENU] button.
•
You cannot use the LX AMP operation during standby
mode.
|
44
English
Rotary volume operation select
Various items can be set using the rotary volume
knob.
Display
Setting
"Rotary SEL:ON" The rotary volume knob can be used for item
setup.
"Rotary SEL:OFF" The rotary volume knob cannot be used for
item setup.
•
To use the rotary volume knob for item setup, select
"Rotary SEL: ON" and press the [1] button in each
setup mode.
English
|
45
Basic Operations of remote
SRC
SRC
VOL.
ATT
ATT
38
VOL.
38
FM+
DISC
FM/AM/DISC+/DISC–
4
¢
AM–
4/¢
DNPP
DNPP
/SBF
DIRECT
/OK
Not Used
DIRECT/OK
ABC
JKL
TUV
QZ
DEF
MNO
WXY
GHI
[0] — [9]
PRS
Loading and Replacing the battery
Basic operations
Use two "AA"-size batteries.
[VOL.] buttons
Slide the cover while pressing downwards to
remove it as illustrated.
Adjusting the volume.
[SRC] button
Each time the button is pressed the source
switches.
Insert the batteries with the + and – poles aligned
properly, following the illustration inside the case.
For the source switching order refer to 'Selecting
the Source' (page 13).
[ATT] button
Turning the volume down quickly.
When it is pressed again it returns to the previous
level.
2WARNING
•
•
Store unused batteries out of the reach of children.
Contact a doctor immediately if the battery is
accidentally swallowed.
Do not set the remote on hot places such as above
the dashboard.
|
46
English
In Tuner source
In TV source
[FM]/ [AM] buttons
[FM] button
Select the band.
Each time the [FM] button is pressed it switches
between the FM1, FM2, and FM3 bands.
Select the TV band and Video input.
Each time the [FM] button is pressed TV bands
and Video input switch.
[4]/ [¢] buttons
Tune up or down band.
[4]/ [¢] buttons
Select the TV channel.
[0] — [9] buttons
[0] — [9] buttons
Press buttons [1] — [6] to recall preset stations.
Press buttons [1] — [6] to recall preset TV
channels.
[DIRECT]/ [OK] button
Enters and cancels the 'Direct Access Tuning'
(page 27) mode.
[38] button
Enters and cancels the 'PTY (Program Type)'
(page 30) mode.
[DNPP] button
Enters and cancels the 'SNPP (Station Name
Preset Play)' (page 28) mode.
In Disc source
[4]/ [¢] buttons
Doing track/file forward and backward.
[DISC+]/ [DISC–] buttons
Doing disc/folder forward and backward.
[38] button
Each time the button is pressed the song pauses
and plays.
[DNPP] button
Enters and cancels the 'DNPP (Disc Name Preset
Play)' (page 37) mode.
[0] — [9] buttons
When in 'Direct Track/File Search' (page 34) and
'Direct Disc Search' (page 34), enter the track/file/
disc number.
English
|
47
Accessories/ Installation Procedure
Accessories
Installation Procedure
1. To prevent short circuits, remove the key from
the ignition and disconnect the - terminal of
the battery.
1
2. Make the proper input and output wire
connections for each unit.
3. Connect the wire on the wiring harness.
..........1
4. Take Connector B on the wiring harness and
connect it to the speaker connector in your
vehicle.
2
5. Take Connector A on the wiring harness and
connect it to the external power connector on
your vehicle.
6. Connect the wiring harness connector to the
unit.
..........2
7. Install the unit in your car.
8. Reconnect the - terminal of the battery.
3
9. Turn the vehicle’s ignition key on and open the
panel.
10.Press the [5] button and the reset button.
..........1
•
If your car is not prepared for this special connection-
system, consult your Kenwood dealer.
4
•
Only use antenna conversion adapters (ISO-JASO) when
the antenna cord has an ISO plug.
•
Make sure that all wire connections are securely made by
inserting jacks until they lock completely.
..........4
•
If your vehicle’s ignition does not have an ACC position,
or if the ignition wire is connected to a power source
with constant voltage such as a battery wire, the power
will not be linked with the ignition (i.e., it will not turn on
and off along with the ignition). If you want to link the
unit’s power with the ignition, connect the ignition wire
to a power source that can be turned on and off with the
ignition key.
5
..........4
•
If the fuse blows, first make sure that the wires have not
caused a short circuit, then replace the old fuse with one
with the same rating.
6
•
Insulate unconnected wires with vinyl tape or other
similar material. To prevent short circuits, also do not
remove the caps on the ends of the unconnected wires
or the terminals.
..........2
•
Connect the speaker wires correctly to the terminals to
which they correspond. The unit may receive damage or
fail to work if you share the - wires and/or ground them
to any metal part in the car.
•
•
After the unit is installed, check whether the brake lamps,
indicators, wipers, etc. on the car are working properly.
If the console has a lid, make sure to install the unit so
that the faceplate does not hit the lid when closing and
opening.
•
Mount the unit so that the mounting angle is 30° or less.
|
48
English
Connecting Wires to Terminals
Subwoofer output (Black)
Antenna Conversion Adaptor (ISO–
JASO) (Accessory3)
Center output (Black)
Front right output (Red)
Antenna Cord (ISO)
Front left output (White)
Rear right output (Red)
Rear left output (White)
AUX right input (Red)
FM/AM antenna
input
AUX left input (White)
Fuse (10A)
KENWOOD disc changer input
To connect the Disc changer,
consult your Disc changer
manual.
Wiring harness
(Accessory1)
External amplifier control wire
(Pink/ Black)
To "EXT.AMP.CONT." terminal of the
amplifier having the external amp control
function.
EXT.
CONT
Connect to the terminal that is grounded
when either the telephone rings or during
conversation.
TEL mute wire (Brown)
TEL MUTE
To connect the KENWOOD
navigation system, consult
your navigation manual.
If no connections are made, do
not let the wire come out from
the tab.
Power control/ Motor antenna
Connect either to the power control
terminal when using the optional power
amplifier, or to the antenna control
terminal in the vehicle.
control wire (Blue/White)
P.CONT
ANT.CONT
Battery wire (Yellow)
Ignition wire (Red)
See next page
A–7 Pin (Red)
A–4 Pin (Yellow)
8
7
6
5
4
3
2
1
Connector A
Connector B
8
7
6
5
4
3
2
1
English
|
49
Connecting Wires to Terminals
Connector Function Guide
Pin Numbers for Cable Colour
ISO Connectors
External Power
Connector
2WARNING
Connecting the ISO Connector
The pin arrangement for the ISO connectors depends
on the type of vehicle you drive. Make sure to make the
proper connections to prevent damage to the unit.
The default connection for the wiring harness is described
in 1 below. If the ISO connector pins are set as described
in 2 or 3, make the connection as illustrated.
Functions
A-4
A-5
A-6
A-7
A-8
Yellow
Battery
Power Control
Dimmer
Ignition (ACC)
Earth (Ground)
Connection
Blue/White
Orange/White
Red
Please be sure to reconnect the cable as shown 2 below
to install this unit to the Volkswagen vehicles etc.
Black
Speaker
Connector
1(Default setting) The A-7 pin (red) of the vehicle’s
ISO connector is linked with the ignition, and
the A-4 pin (yellow) is connected to the constant
power supply.
B-1
B-2
B-3
B-4
B-5
Purple
Purple/Black
Gray
Gray/Black
White
Rear Right (+)
Rear Right (–)
Front Right (+)
Front Right (–)
Front Left (+)
Ignition cable (Red)
A-7 Pin (Red)
B-6
B-7
B-8
White/Black
Green
Green/Black
Front Left (–)
Rear Left (+)
Rear Left (–)
Unit
Battery cable (Yellow)
Vehicle
A-4 Pin (Yellow)
2The A-7 pin (red) of the vehicle’s ISO connector
is connected to the constant power supply, and
the A-4 pin (yellow) is linked to the ignition.
Ignition cable
A-7 Pin (Red)
(Red)
Unit
Vehicle
A-4 Pin (Yellow)
Battery cable
(Yellow)
3The A-4 pin (yellow) of the vehicle’s ISO
connector is not connected to anything, while
the A-7 pin (red) is connected to the constant
power supply (or both the A-7 (red) and A-4
(yellow) pins are connected to the constant
power supply).
Ignition cable
(Red)
A-7 Pin (Red)
Unit
Vehicle
Connect to a power source
that can be turned on and
off with the ignition key.
Battery cable
(Yellow)
|
50
English
Installation
non-Japanese cars
Japanese cars
1 Refer to the section 'Removing the hard rubber
frame' (page 53) and then remove the hard
rubber frame.
2 Align the holes in the unit (two locations on each
side) with the vehicle mounting bracket and
secure the unit with the accessory screws.
Metal mounting strap
(commercially available)
Firewall or metal support
T
N
T/N
T
N
T: Toyota cars
N: Nissan cars
Bend the tabs of the
mounting sleeve with a
screwdriver or similar utensil
and attach it in place.
8 mm
MAX.
Phillips truss head sheet metal screw
(commercially available)
8mm
MAX.
4
5
Screw (M4X8)
(commercially available)
ø5mm
ø5mm
Accessory4...for Nissan car
Accessory5 ...for Toyota car
•
Make sure that the unit is installed securely in place. If
the unit is unstable, it may malfunction (for example, the
sound may skip).
•
•
During installation, do not use any screws except for
those provided. The use of different screws might result
in damage to the main unit.
Damage may occur if a screwdriver or similar tool is used
with excessive force during the installations.
•
•
To attach this unit, make sure the front of the control
panel faces you and fit it into the mounting sleeve by
pressing the four corners of the hard rubber frame at the
same time.
Do not apply strong pressure to other sections than the
corners; otherwise troubles such as the impossibility of
opening or closing the panel may result.
The hollow at the center of the rubber frame is designed
to make it easier to remove discs.
If you do not want the hollow to be visible, mount the
rubber frame in the opposite direction (with the flat side
at the top instead of the bottom).
English
|
51
Installation
Locking the Backpanel to the unit
If you want to fasten the faceplate to the main
unit so that it does not fall off.
1 Refer to the Removing the Backpanel function of
the section on 'Theft Deterrent Panel' (page 20)
and remove the Backpanel.
2 Insert the panel lock screws into the holes at the
sides of the panel.
Accessory6
3 Reattach the Backpanel.
•
Never insert the panel lock screws in any other screw
holes than the one specified. If you insert them in
another hole, it will contract and may cause damage to
the mechanical parts inside the unit.
|
52
English
Removing the Unit
Removing the hard rubber frame
Removing the Unit
1 Engage the catch pins on the removal tool and
remove the two locks on the upper level.
Upper the frame and pull it forward as shown in
the figure.
1 Refer to the section 'Removing the hard rubber
frame' (page 53) and then remove the hard
rubber frame.
2 Remove the screw (M4 × 8) on the back panel.
3 Insert the two removal tools deeply into the slots
on each side, as shown.
Screw (M4X8)
(commercially available)
Lock
Catch
Accessory2
Removal tool
2 When the upper level is removed, remove the
lower two locations.
Accessory2
Removal tool
4 Lower the removal tool toward the bottom, and
pull out the unit halfway while pressing towards
the inside.
•
The frame can be removed from the bottom side in the
same manner.
•
Be careful to avoid injury from the catch pins on the
removal tool.
5 Pull the unit all the way out with your hands,
being careful not to drop it.
English
|
53
Troubleshooting Guide
What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.
? No sound can be heard, or the volume is low.
✔
The fader or balance settings are set all the way to
one side.
☞
Center the fader and balance settings.
✔
The input/output wires or wiring harness are
connected incorrectly.
☞
Reconnect the input/output wires or the
wiring harness correctly. See the section on
'Connecting Wires to Terminals'.
General
? The power does not turn ON.
✔
The fuse has blown.
✔
The values of Volume offset are low.
☞
☞
After checking for short circuits in the wires,
replace the fuse with one with the same
rating.
Turn up the Volume offset, referring to the
section on 'Audio control' (page 22).
✔
✔
The 'Built-in Amp Mute Setting' (page 41) is ON.
Turn it OFF.
✔
✔
Speaker cable touches on chassis etc.
☞
☞
Wire or insulate the speaker cable properly
and press the reset button.
If the PLII is selected by 'Audio Setup (Easy mode)'
(page24) and if the Front speaker is set to "16
— 7✳10" and the Center speaker is set to "16
over," the subwoofer does not sound.
The Demonstration mode has been selected.
☞
Hold down button [5] and press the Reset
button to release the Demonstration mode.
☞
---
? There’s a source you can’t switch.
? The sound quality is poor or distorted.
✔
There’s no media inserted.
✔
One of the speaker wires is being pinched by a
screw in the car.
☞
Set the media you want to listen to. If there’s
no media in this unit, you can’t switch to each
source.
☞
Check the speaker wiring.
✔
The speakers are not wired correctly.
✔
The Disc changer isn’t connected.
☞
Reconnect the speaker wires so that each
output terminal is connected to a different
speaker.
☞
Connect the Disc changer. If the Disc changer
isn’t connected to it’s input terminal, You can’t
switch to an external disc source.
? Subwoofer Output, Subwoofer Low Pass Filter
and Subwoofer setting can’t be done.
? The memory is erased when the ignition is
turned OFF.
✔
The 'Dual Zone System' (page 14) is ON.
✔
The ignition and battery wire are incorrectly
☞
Turn it OFF.
connected.
? The Touch Sensor Tone doesn’t sound.
The preout jack is being used.
☞
Connect the wire correctly, referring to the
section on 'Connecting Wires to Terminals'.
✔
☞
The Touch Sensor Tone can’t be output from
the preout jack.
? The TEL mute function does not work.
The TEL mute wire is not connected properly.
✔
? Even though Synchronize Clock is ON, the clock
can’t be adjusted.
☞
Connect the wire correctly, referring to the
section on 'Connecting Wires to Terminals'.
✔
The received RDS station isn’t sending time data.
? The TEL mute function turns ON even though the
TEL mute wire is not connected.
☞
Receive another RDS station.
? The Dimmer function doesn’t work.
The Dimmer wire isn’t connected correctly.
Check the Dimmer wire connection.
✔
The TEL mute wire is touching a metal part of the
✔
car.
☞
☞
Pull the TEL mute wire away from the metal
part of the car.
|
54
English
Disc source
? The panel is not hidden even when the power is
turned off.
? "AUX EXT" is displayed without achieving
✔
The protection function for preventing fingers or
other things from getting caught in between the
panel and this unit has been activated.
External disc control mode.
✔
Unsupported disc changer is connected.
☞
Use the disc changer mentioned in the
'About CD players/disc changers connected
to this unit' (page 5) of the section on 'Safety
precautions'.
☞
Turn off the power again.
? Sound is interrupted when Dual Zone System is
set to ON.
✔
When Dual Zone System is set to ON while
the Menu system’s 'AF (Alternative Frequency)'
(page 42) is set to ON, the sound quality may be
adversely affected if the internal source is set to
the tuner.
? The specified disc does not play, but another one
plays instead.
✔
The specified CD is quite dirty.
☞
Clean the CD.
✔
The disc is loaded in a different slot from that
specified.
☞
---
☞
Eject the disc magazine and check the
number for the specified disc.
? There are no audio control effects.
✔
FOCUS/ SRS 3D item on 'Audio control' (page 22)
have no effect in rear output.
✔
The disc is severely scratched.
Try another disc instead.
☞
☞
---
? A CD ejects as soon as it is loaded.
The CD is quite dirty.
? The Control Panel moves although you do not
desire.
✔
☞
Clean the CD, referring to the CD cleaning of
the section on 'About CDs' (page 7).
✔
The Demonstration mode has been selected.
☞
Hold down button [5] and press the Reset
button to release the Demonstration mode.
? Can’t remove disc.
The cause is that more than 10 minutes has
✔
? Some speakers may not sound even if you
control the "T-TONE".
elapsed since the vehicle ACC switch was turned
OFF.
✔
You have selected "None" by Speaker Select
☞
The disc can only be removed within 10
minutes of the ACC switch being turned OFF.
If more than 10 minutes has elapsed, turn
the ACC switch ON again and press the Eject
button.
control.
☞
The speaker does not sound if it has been set
to "None" by Speaker Select control.
✔
---
☞
The subwoofer does not sound.
? The disc won’t insert.
There’s already another disc inserted.
Press the [0] button and remove the disc.
Tuner source
✔
☞
? Radio reception is poor.
✔
The car antenna is not extended.
? Direct Search can’t be done.
Another function is ON.
Turn Random Play or other functions OFF.
☞
Pull the antenna out all the way.
✔
✔
The antenna control wire is not connected.
☞
☞
Connect the wire correctly, referring to the
section on 'Connecting Wires to Terminals'.
? Track Search can’t be done.
For the discs/folders first or last song.
✔
? The desired frequency can’t be entered with the
Direct Access Tuning.
☞
For each disc/folder, Track Search can’t be
done in the backward direction for the first
song or in the forward direction for the last
song.
✔
A station that can’t be received is being entered.
☞
Enter a station that can be received.
✔
You’re trying to enter a frequency with a 0.01 MHz
unit.
☞
What can be designated in the FM band is to
0.1 MHz.
? It isn’t the set Traffic information sound volume.
✔
The set sound volume is less than the tuner sound
volume.
☞
If the tuner sound volume is louder than the
set sound volume,the tuner sound volume is
used.
English
|
55
Troubleshooting Guide
MP3/WMA source
The messages shown below display your
systems condition.
? Cannot play an MP3/WMA.
✔
The media is scratched or dirty.
Eject:
No disc magazine has been loaded in
the changer. The disc magazine is not
completely loaded.
☞
Clean the media, referring to the CD cleaning
of the section on 'About CDs' (page 7).
➪ Load the disc magazine properly.
No CD in the unit.
➪ Insert the CD.
? The sound skips when an MP3/WMA is being
played.
✔
The media is scratched or dirty.
☞
Clean the media, referring to the CD cleaning
of the section on 'About CDs' (page 7).
No Disc:
No disc has been loaded in the disc
magazine.
➪ Load a disc into the disc magazine.
✔
The recording condition is bad.
Record the media again or use another media.
☞
TOC Error:
No disc has been loaded in the disc
magazine.
➪ Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-
down. The CD is scratched a lot.
➪ Clean the CD and load it correctly.
? The MP3/WMA track time isn’t displayed
correctly.
✔
---
☞
There are times when it isn’t displayed
correctly according to the MP3/WMA
recording conditions.
E-05:
The CD is upside-down.
➪ Load the CD correctly.
If the following situations, consult your
nearest service center:
Blank Disc:
Nothing has been recorded on the MD.
Even though the disc changer is connected, the
Disc Changer source is not ON, with "AUX EXT"
showing in the display during the Changer Mode.
No Track Disc: No tracks are recorded on the MD,
although it has a title.
E-15:
Media was played that doesn’t have data
recorded that the unit can play.
➪ Use media that has data recorded that
the unit can play.
No Music Data: Media was played that doesn’t have data
recorded that the unit can play.
➪ Use media that has data recorded that
the unit can play.
Files for picture downloading only are
recorded in CD-R/CD-RW.
No Panel:
E-77:
The faceplate of the slave unit being
connected to this unit has been removed.
➪ Replace it.
The unit is malfunctioning for some reason.
➪ Press the reset button on the unit. If the
"E-77" code does not disappear, consult
your nearest service center.
Mecha Error: Something is wrong with the disc
magazine. Or the unit is malfunctioning for
some reason.
➪ Check the disc magazine. And then
press the reset button on the unit. If the
"Mecha Error" code does not disappear,
consult your nearest service center.
|
56
English
Hold Error:
The protective circuit in the unit activates
when the temperature inside the
automatic disc changer exceeds 60°C
(140°F), stopping all operation.
➪ Cool down the unit by opening
the windows or turning on the air
conditioner. As the temperature falls
below 60°C (140°F), the disc will start
playing again.
No Display File:
No file that can be downloaded is
contained in the CD-ROM.
➪ Make sure that a files created with
disp.com> is contained in the CD-ROM.
Do not delete the extension (.kbm)
created when the file was created.
Incorrect File: The file selected to be downloaded has a
format that this unit cannot read.
NO NAME:
• Attempted to display DNPS during the CD
play having no disc names preset.
• Attempted to display SNPS during the
receiving session of the station having no
station name preset.
• Attempted to display the ID3 tag while
the MP3/WMA having no ID3 tag is being
played.
➪ Recreate the file.
Writing Error: Writing failed while the file was
downloaded.
➪ Try the downloading again.
DEMO MODE: The Demonstration mode has been
selected.
➪ Hold down button [5] and press
the Reset button to release the
Demonstration mode.
Waiting:
Load:
Radio text data is being received.
Discs are being exchanged in the Disc
changer.
Reading:
The unit is reading the data on the disc.
NO ACCESS:
After setting it in the Disc Changer, DNPP
was done without having it been played at
least 1 time.
IN (Blink):
The CD player section is not operating
properly.
➪ Reinsert the CD. If the CD cannot be
ejected or the display continues to flash
even when the CD has been properly
reinserted, please switch off the power
and consult your nearest service center.
Unsupported File:
A MP3/WMA is played with a format that
this unit can’t support.
➪ ----
Protected File: A copy-protected file is played.
➪ ----
Can’t Download/ Download Error:
This unit does not work properly for some
reason.
➪ Press the reset button to download
it again. If this error is still displayed,
consult a local Kenwood dealer.
English
|
57
Specifications
Specifications subject to change without notice.
FM tuner section
Audio section
Frequency range (50 kHz space)
: 87.5 MHz – 108.0 MHz
Maximum output power
: 50 W x 4
Usable sensitivity (S/N = 26dB)
: 0.7 µV /75 Ω
Full Bandwidth Power (at less than 1% THD)
: 22 W x 4
Quieting Sensitivity (S/N = 46dB)
: 1.6 µV /75 Ω
Tone action
Bass : 60 Hz – 400 Hz 9 dB
Frequency response ( 3.0 dB)
Middle : 500 Hz – 3.15 kHz 9 dB
Treble : 4 kHz – 16 kHz 9 dB
Preout level / Load (during disc play)
: 5000 mV/10 kΩ
Preout impedance (during disc play)
: ≤ 80 Ω
: 30 Hz – 15 kHz
Signal to Noise ratio (MONO)
: 65 dB
Selectivity (DIN) ( 400 kHz)
: ≥ 80 dB
Stereo separation (1 kHz)
: 35 dB
Auxiliary input
Frequency response ( 1 dB)
: 20 Hz – 20 kHz
Input Maximum Voltage
: 1200 mV
Input Impedance
: 100 kΩ
MW tuner section
Frequency range (9 kHz space)
: 531 kHz – 1611 kHz
Usable sensitivity (S/N = 20dB)
: 25 µV
LW tuner section
General
Frequency range
Operating voltage (11 – 16V allowable)
: 14.4 V
Current consumption
: 10 A
: 153 kHz – 281 kHz
Usable sensitivity (S/N = 20dB)
: 45 µV
Installation Size (W x H x D)
: 182 x 53 x 163 mm
Weight
: 2.1 kg
CD player section
Laser diode
: GaAlAs
Digital filter (D/A)
: 8 Times Over Sampling
D/A Converter
: 1 Bit
Spindle speed (CD-DA) (MP3) (WMA)
: 1000 – 400 rpm (CLV 2times)
Wow & Flutter
: Below Measurable Limit
Frequency response ( 1 dB)
: 10 Hz – 20 kHz
Total harmonic distortion (1 kHz)
: 0.01 %
Signal to Noise ratio (1 kHz)
: 105 dB
Dynamic range
: 93 dB
Channel separation
: 95 dB
MP3 decode
: Compliant with MPEG-1/2 Audio Layer-3
WMA decode
: Compliant with Windows Media Audio
|
58
English
|