Fisher Price GEOTRAX C5218 User Manual

C5218  
High Chimes ClockTower  
1.5V x 3  
“AAA” (LR03)  
Battery  
Information  
SHOWN ACTUAL SIZE  
We recommend the use of alkaline  
batteries for longer battery life.  
Battery Installation  
BATTERY COMPARTMENT DOOR  
• Locate the battery compartment on the  
clock tower.  
• Loosen the screw in the battery compartment  
door with a Phillips screwdriver. Remove the  
battery compartment door.  
• Insert three “AAA” (LR03) alkaline batteries.  
• Replace the battery compartment door and  
tighten the screw with a Phillips screwdriver.  
Do not over-tighten.  
• When sounds from this toy become faint  
or stop, it’s time for an adult to change  
the batteries.  
Battery Safety Information  
Batteries may leak fluids that can cause a chemical burn injury or ruin your toy. To avoid  
battery leakage:  
• Do not mix old and new batteries or  
batteries of different types: alkaline,  
standard (carbon-zinc) or rechargeable  
(nickel-cadmium).  
• Never short-circuit the battery terminals.  
• Use only batteries of the same or  
equivalent type, as recommended.  
• Do not charge non-rechargeable  
batteries.  
• Insert batteries as indicated inside the  
battery compartment.  
• Remove rechargeable batteries from the  
toy before charging.  
• Remove batteries during long periods of  
non-use. Always remove exhausted  
batteries from the toy. Dispose of  
batteries safely. Do not dispose of  
batteries in a fire. The batteries may  
explode or leak.  
• If removable, rechargeable batteries are  
used, they are only to be charged under  
adult supervision.  
3
For layout ideas visit the  
GeoTraxsection of  
Care  
Wipe the toy with a clean cloth dampened with a  
mild soap and water solution. Do not immerse the toy.  
Questions? We'd like to hear from you!  
Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-KIDS (5437)s,  
8 AM - 6 PM EST Monday through Friday. Hearing-impaired  
consumers using TTY/TDD equipment, please call 1-800-382-7470.  
Or, write to: Fisher-Price® Consumer Relations, 636 Girard Avenue  
East Aurora, New York 14052, U.S.A.  
For other countries outside the United States:  
Canada: call 1-800-567-7724, or write to: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R  
3W2. Great Britain: telephone 01628 500302. Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag  
#870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312. New Zealand: 16-18 William  
Pickering Drive, Albany 1331, Auckland. Asia: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre,  
Harbour City, Tsimshatsui, HK, China.  
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.  
©2004 Mattel, Inc. All Right Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.  
PRINTED IN CHINA  
C5218a-0920  
Assembly  
CHIMNEY  
4
1
CROSS TRACK  
BASE  
“Snap” the cross track into the base.  
“Snap” the chimney into the top of  
the tower.  
2
PLAIN  
OVERHANG  
5
“Snap” the plain overhangs into the  
base, as shown.  
ARCHED  
OVERHANG  
3
Place the tower onto the  
base assembly.  
“Snap” the arched overhangs into  
the tower, as shown.  
Assembly is now complete!  
5
Chimes & Music!  
When a train travels through the middle or top level of the tower, you’ll hear  
chimes and music.  
PRESS  
1
POWER  
SWITCH  
2
• Locate the power switch near the  
top of the tower.  
• Slide the switch to the  
to turn the toy on and the  
position to turn the toy off.  
position  
• Press the chimney to  
activate the tower.  
°
• When the train goes  
through either the  
middle level or top  
level of the tower,  
you’ll hear chimes  
and music.  
Hint: If the a train does not pass through the clock tower in a few minutes, the tower turns off  
automatically and plays a chime. Press the chimney again to turn the tower back on.  
Important: The clock tower sound effect feature is activated by contrast in lighting. This feature  
may not work if the toy is in very bright light or direct sunlight. Please keep the clock tower out of  
bright light or direct sunlight.  
6
Three Levels of  
Track Layouts!  
TRACK NOT INCLUDED  
To build a layout on the bottom level, just  
place a straight track (not included)  
through the bottom arch of the tower.  
LEVEL  
1
• Use an Elevation Track Pack  
(sold separately) to access  
the second and third levels  
of the tower.  
• Attach a ramp assembly (sold  
separately) to the middle level  
to reach the ground.  
LEVEL  
2
• Use supports and straight  
tracks (sold separately)  
to build an elevated  
assembly.  
• Attach a ramp assembly to a support (each  
sold separately) to reach the third level.  
LEVEL  
3
• Use two supports stacked up and straight  
tracks (each sold separately) to build an  
elevated assembly.  
7
Chimes & Music!  
• You do not need an Elevation Track Pack to utilize  
the tower sound effect feature.  
• Separate the tower into two parts, so the middle  
level is now at ground level. When a train goes  
through this level, you’ll also hear chimes  
and music. (Track sold separately.)  
SPIN  
• Rotate the spinner  
on the tower to  
play a song.  
The more  
you collect,  
the more  
fun it gets!  
Playsets and accessories sold separately and subject to availability.  
Two of each Elevation Track Packs used to make this configuration.  
8

Maxtor DIAMONDMAXTM PLUS 5120 90750D3 User Manual
Marantz CD6000SE User Manual
Legacy Car Audio LCD69DSX User Manual
JVC KD SX858R User Manual
IronKey Personal USB Flash Drive User Manual
Bunn Coffeemaker SN FMD0013000 UP User Manual
Bosch Appliances Tassimo Coffee Maker T45 User Manual
Blackberry 7730 User Manual
Black & Decker DCM680BF User Manual
AT&T CINGULAR 8525 User Manual