SPECIAL SELECT
USE & CARE INSTRUCTIONS
10 SPEED BLENDER
FSB100
ADDITIONAL IMPORTANT SAFEGUARDS
1. All users of this appliance must read and understand this
Owner’s Manual before operating or cleaning this appliance.
2. The cord to this appliance should be plugged into a
120V AC electrical outlet only.
3. When using this appliance, provide adequate air space above
and on all sides for air circulation. Do not allow this appliance
to touch curtains, wall coverings, clothing, dish towels or other
flammable materials during use.
4. Do not leave this appliance unattended during use.
5. If this appliance begins to malfunction during use, immediately
press OFF Button and unplug the cord. Do not use or attempt to
repair the malfunctioning appliance! Do not use the Blending
Jar if cracked or chipped.
THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY.
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to
fit into a polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to modify the plug in any way.
PLASTICIZER WARNING
CAUTION: To prevent Plasticizers from migrating from the
finish of the counter top or table top or other furniture, place
NON-PLASTIC coasters or place mats between the appliance
and the finish of the counter top or table top.
Failure to do so may cause the finish to darken, permanent
blemishes may occur or stains can appear.
2
®
GETTING TO KNOW YOUR FARBERWARE
FSB100 10 SPEED BLENDER
1.
2.
3.
1. Measuring Cup (P/N 70632)
4.
2. Cover (P/N 70633)
3. Blending Jar (P/N 70634)
5.
4. Rubber Seal Ring (P/N 70380)
5. Stainless Steel Blade Assembly
(P/N 70381)
6.
7.
8.
6. Collar (P/N 70382)
7. Safety Switch
8. Motor Housing
9.
10.
9. Power Cord
10. 10 Speed Control Panel
Pulse
Low
1
2
3
8
4
9
5
Off
6
7
10
High
3
CAUTIONS BEFORE USING
1. Use this product with rated voltage AC outlet only.
2. Be sure to unplug the AC cord when Blender is not being used.
SAFETY SYSTEM
This appliance has a Safety System which disables the Motor if the
Blending Jar is not (or is improperly) seated in the Motor Housing. If
the Blending Jar is not seated properly, the Blender will not turn on,
or will turn off if it is already on. This System is intended for safety
reasons only. DO NOT use this Safety System to turn the Blender
on and off.
BEFORE USING FOR THE FIRST TIME
Wash Blending Jar, Measuring Cup, Cover, and Blades with warm,
soapy water. Rinse and dry thoroughly.
CAUTION: To protect against risk of electrical shock, do not put
Motor Housing in water or other liquid.
4
BLENDER OPERATING INSTRUCTIONS
1. Place Motor Housing on a dry level surface.
2. Be sure OFF Button is depressed. Plug the cord into an AC
wall outlet.
3. Place completely assembled Blender (Blending Jar, Rubber Seal
Ring, Blade Assembly and Collar) on Motor Housing.
NOTE: For blending hot ingredients, remove Measuring Cup to
allow for heat expansion before blending. Place a small rag or
paper towel over opening to prevent hot liquids from
splashing out.
CAUTION: To prevent the risk of burns, do not use your hand to
cover opening!
4. Add ingredients to Blending Jar as directed by your recipe.
5. Place Cover with Measuring Cup on Blending Jar. Remember to
always hold Cover in place during processing.
6. Select the desired Speed Control.
7. Press either HIGH or LOW Control Button. The LOW Button
produces speeds printed above the Buttons (Speeds 1-5). The
HIGH Button produces speeds printed below the Buttons
(Speeds 6-10).
8. Speeds with LOW printed above the Buttons will process
ingredients as long as you press the Button and will stop
processing when the Button is released.
9. For continuous processing, press any Speed Button that
does not have LOW above it. To stop processing, press the
OFF Button.
10. CAUTION: Keep hands and utensils out of the Blending Jar
while blending to prevent the possibilities of severe injury to
persons or damage to the unit. A spatula may be used but
must only be used when the unit is not running.
5
HINTS AND TIPS
GENERAL
• Add ingredients to Blending Jar a little at a time to ensure proper
blending and to prevent overflow. Never fill Blending Jar more
than 3/4 full; the action of the Blades will cause the ingredients to
rise in the Blending Jar. Make large recipes in several batches.
• Unless the recipe states differently, pour liquid ingredients into
Blending Jar before solid ingredients. The liquid will help the
processing go faster and at a lower speed.
• Always add 1 cup of liquid before processing ice.
• Blend for 5 to 30 seconds, not minutes, and check consistency.
Continue blending until desired consistency is reached. Over-
blending will result in a loose consistency.
NOTE: Always operate Blender with Cover in place.
• Do not remove Blending Jar from the Motor Housing when the
Motor is running.
• Keep hands and utensils out of Blending Jar while processing to
prevent the possibility of severe personal injury and/or damage to
the Blender. A spatula may be used, but must only be used when
the Blender is not running.
SOLIDS
• Thick mixtures require special attention during processing.
Periodically press the OFF Button and scrape mixture off sides of
Blending Jar and onto the Blades. Replace Cover and continue
processing. Select a higher speed if processing becomes sluggish.
• With the Measuring Cup removed, add solids and ice a little at a
time through the hole in the Blending Jar Cover. Always cut solid
foods such as vegetables and cheese into small chunks before
placing in the Blending Jar.
HOT INGREDIENTS
• To prevent excessive heat expansion, remove Measuring Cup from
Cover before adding hot ingredients. Add hot foods slowly (to a
maximum of 2 cups) through the Cover’s hole.
NOTE: For blending hot ingredients, remove Measuring Cup to allow
for heat expansion before blending. Place a small rag or paper
towel over opening to prevent hot liquids from splashing out.
CAUTION: To prevent the risk of burns, do not use your hand to
cover opening!
6
CARE AND CLEANING
NOTE: Do not immerse Motor Housing in water.
1. First remove the plug from the wall socket and disassemble
Blending Jar parts and wash in warm, soapy water; remove
Measuring Cup from Cover before washing, wash separately.
Rinse all parts and wipe dry.
2. For complete cleaning, remove Gasket from Blade Assembly,
wash in warm, soapy water.
3. Wipe cord with warm, sudsy cloth, then wipe clean with a
damp cloth. Dry with a soft cloth.
NOTE: Always correctly assemble clean Blender Parts before
storing on the Motor Housing. Severe injury can result if
Blender is accidentally turned on when not properly
assembled.
7
RECIPES
Fruit Smoothie
1 cup sliced fresh or thawed frozen strawberries
1 large ripe banana, peeled and broken into chunks
2 scoops (1 cup) vanilla or strawberry ice cream or
strawberry sorbet
1/2 cup milk
Combine all ingredients in Blending Jar. Cover and blend at HIGH
Speed (10) until smooth. Pour into frosted mugs or glasses.
Makes 2 to 3 servings.
Creamy Raspberry Smoothie
1 cup fresh or thawed frozen raspberries
2 scoops (1 cup) vanilla frozen yogurt or ice cream
1/2 cup milk
1 teaspoon vanilla extract
Combine all ingredients in Blending Jar. Cover and blend at HIGH
Speed (10) until smooth. Pour into frosted mugs or glasses.
Makes 2 servings.
Tropical Shake
1 large ripe banana, peeled and broken into chunks
1 can (8 ounces) crushed pineapple in juice, undrained
2 scoops (1 cup) mango or papaya sorbet
1/4 cup lemonade, limeade or orange juice
Lime slices (optional)
Combine the first four ingredients in Blending Jar. Cover and blend
at HIGH Speed (10) until smooth. Pour into frosted mugs or
glasses. Garnish with lime slices, if desired.
Makes 2 servings.
8
RECIPES (Continued)
Cranberry-Orange Cooler
3/4 cup orange juice
1/2 cup frozen cranberry cocktail concentrate, not thawed
4 large ice cubes, cracked into chunks or
1/2 cup mini ice cubes
Combine all ingredients in Blending Jar. Cover and blend at HIGH
Speed (10) until smooth. Pour into frosted mugs or glasses.
Makes 2 to 3 servings.
Butternut Squash Bisque
2 tablespoons butter or margarine
1 large onion, chopped
1 small butternut squash, about 1-1/4 pounds
1 can (13-3/4 ounces) chicken broth
1/2 cup half and half, milk or additional chicken broth
1/2 teaspoon salt
1/4 teaspoon nutmeg
1/8 teaspoon cayenne pepper
Melt butter in a medium saucepan over medium heat. Add onion;
cook 5 minutes, stirring occasionally. Peel squash. Using a large
knife, cut squash crosswise into 1/2 inch slices, discarding seeds
and membrane. Cut slices into 1/2-inch pieces. Add to saucepan
with broth; bring to a boil. Cover and simmer 20 to 25 minutes or
until squash is very tender.
Transfer half of mixture to Blending Jar. Remove inner Measuring
Cup from Blender Cover to allow steam to escape. Cover and
process at HIGH Speed (6) until mixture is puréed. Return to
saucepan. Repeat with remaining squash mixture. Add half and
half, salt, nutmeg and cayenne pepper to squash mixture in
saucepan; heat through.
Makes 4 servings, about 5 cups soup.
9
RECIPES (Continued)
Cream of Broccoli Soup
1 pound fresh broccoli
1 can (13-3/4 ounces) chicken broth
3/4 cup half and half or cream
1/2 cup finely chopped ham (optional)
1/2 teaspoon salt
1/4 teaspoon freshly ground black pepper
1/2 cup shredded Cheddar cheese
1/2 cup garlic croutons (optional)
Chop broccoli florets; thinly slice stems. Combine broccoli and
broth in a medium saucepan. Bring to a boil; reduce heat. Cover
and simmer 10 to 12 minutes or until broccoli is tender. Transfer to
Blending Jar. Remove inner Measuring Cup from Blender Cover to
allow steam to escape. Cover and process at HIGH Speed (8) until
mixture is puréed. Return to saucepan; add half and half, ham, salt
and pepper. Heat through, stirring frequently. Ladle into mixing
mixing bowls; top with cheese and serve with croutons.
Makes 4 servings, about 4 cups soup.
10
ONE-YEAR LIMITED WARRANTY
This FARBERWARE® product warranty extends to the original consumer purchaser of the product.
Warranty Duration: This product is warranted to the original consumer purchaser for a period of one
(1) year from the original purchase date.
Warranty Coverage: This product is warranted against defective materials or workmanship. This
warranty is void if the product has been damaged by accident, in shipment, unreasonable use, misuse,
neglect, improper service, commercial use, repairs by unauthorized personnel or other causes not
arising out of defects in materials or workmanship. This warranty is effective only if the product is
purchased and operated in the USA, and does not extend to any units which have been used in
violation of written instructions furnished by FARBERWARE®, or to units which have been altered or
modified or to damage to products or parts thereof which have had the serial number removed, altered,
defaced or rendered illegible.
Warranty Disclaimers: This warranty is in lieu of all warranties expressed or implied and no
representative or person is authorized to assume for FARBERWARE® any other liability in connection
with the sale of our products. There shall be no claims for defects or failure of performance or product
failure under any theory of tort, contract or commercial law including, but not limited to, negligence, gross
negligence, strict liability, breach of warranty and breach of contract. Some states do not allow the exclusion
or limitations of implied warranties or consequential damages, so the above limitations or exclusions may not
apply to you.
FARBERWARE® is not responsible or liable for indirect, special or consequential damages arising out of or
in connections with the use or performance of the product or other damages with respect to loss of property,
or loss of revenues or profit.
Legal Remedies: This warranty gives you specific legal rights, and you may also have other rights that vary
from state to state.
Warranty Performance: During the above one-year warranty period, a product with a defect will be
either repaired or replaced with a reconditioned comparable unit (at FARBERWARE®’s option) when
the product is returned to the FARBERWARE® facility listed below. The repaired or replacement
product will be in warranty for the balance of the one-year warranty period and an additional one-
month period. No charge will be made for such repair or replacement.
Service and Repair
If service is required, you should first call toll-free 1-888-881-8101 between the hours of 8:00 am and
5:00 pm Central Standard Time and ask for CONSUMER SERVICE. Please refer to Model FSB100 when
you call.
In-Warranty Service for a product covered under the warranty period, no charge is made for service
and return postage. Please return the product insured, packaged with sufficient protection, and
postage and insurance prepaid to the address listed below. Call for return authorization.
Out-of-Warranty Service: There will be charges rendered for repairs made to the product after the
expiration of the aforesaid one (1) year warranty period, after purchaser is advised appropriately.
Include $8.00 (U.S.) for return shipping and handling.
FARBERWARE® cannot assume responsibility for loss or damage during incoming shipment. For your
protection, carefully package the product for shipment and insure it with the carrier. Be sure to enclose
the following items with your unit: any accessories related to your problem; your full return address and
daytime phone number; a note describing the problem you experienced; a copy of your sales receipt
or other proof of purchase to determine warranty status. C.O.D. shipments cannot be accepted.
Return the appliance to: ATTN: Repair Department, FARBERWARE®
708 South Missouri Street, Macon, MO 63552
Any questions or comments can be directed to Salton, Inc. at the above address or by calling or
E-Mailing the following:
TOLL FREE: 1-888-881-8101, Mon. - Fri., 7:30 a.m. - 6:00 p.m. CST
E-mail: farberware-electric@saltonusa.com
Please refer to Model FSB100 when you call, write or E-Mail.
®
®
FARBERWARE is a registered trademark of Farberware Inc.
Manufactured and sold pursuant to a license from Farberware Inc.
04/01 P/N 60709 PRINTED IN CHINA
®
|