HP (Hewlett Packard) PW460T User Manual

PW460t  
Digital Camera  
Quick Start Guide  
Getting Started  
Attach the Camera Strap  
To reduce the risk of dropping the camera, it is strongly  
recommended to attach and use the provided camera strap  
Inserting the Battery  
Follow these instructions to insert the rechargeable battery into the battery/memory card  
compartment.  
1. If the battery is already installed, make sure to  
power off the camera before removing and inserting  
recharged or new batteries.  
2. Open the battery/memory card compartment at the  
bottom of the camera.  
1
3. Insert the battery into the compartment with  
correct orientation as illustrated.  
4. Close and lock the battery/memory card compartment  
Inserting an SD/SDHC Memory Card  
It is highly recommended that the camera storage is expanded by inserting a SD or  
SDHC memory card. These memory cards are available at most consumer store and  
online locations.  
1. Make sure to power off the camera before proceeding.  
Inserting the memory card while powered on may damage  
the card and camera.  
2. Open the Battery/memory card compartment at the  
bottom of the camera.  
3. Insert the SD/SDHC card into the memory card slot with  
the metallic connectors facing the front side of the camera as  
illustrated below.  
2
4. Push the SD/SDHC card into the memory slot until it clicks into place. If the card does  
not click into place, repeat the previous step to ensure proper orientation.  
5. Close the Battery/memory card compartment.  
- To remove the SD/SDHC card  
1. Make sure to power off the camera before proceeding.  
Removing the memory card while powered on may damage  
the card and camera.  
2. Open the battery/memory card compartment.  
3. Gently push the card until it clicks and pushes our of  
position.  
4. Carefully pull out the card.  
Charging the Battery  
The battery that comes along with your package is not fully charged. You need to charge  
the battery before using the camera.  
1. Insert the battery into the battery charger as shown.  
2. Connect the power cord to the battery charger.  
3. Plug the power cord to the main outlet.  
The battery charging time is 2 hours.  
3
Camera Views  
Front View  
3
4
1. Flash  
1
2
2. Microphone  
3. Self-timer LED / Assist Lamp  
4. Lens  
Back View  
6
5. LCD monitor  
6. LED indicator  
7. Playback Button  
5
7
4
Top View  
8. Stabilizer button  
9. Power button  
11. Shutter button  
11. Zoom Button  
11  
10  
8
9
Bottom View  
12. Tripod screw hole  
13. Battery / Memory compartment  
14. Speaker  
12  
13  
15  
14  
15. USB / TV Out  
Left/Right View  
16. Strap ring  
16  
5
Initial Settings  
When you turn on your camera for the first time, you will be asked to do the initial  
settings of your camera. First is the setup of language menu. Specify in which language  
menus and messages are to be displayed on the LCD monitor.  
Setting the Language  
Specify in which language menus and messages are to be displayed on the LCD monitor  
1. Tap  
or  
to turn pages.  
2. Tap the desired language button and apply.  
Setting the Date & Time  
1. Tap the screen to select Year/Month/Date or Hour/Minute.  
2. Tap  
or  
to change the value for the date and time.  
3. Tap to apply.  
6
Modes  
Your camera has two modes:  
Record Mode  
This is the default mode while you turn on the camera every time. You are able to  
take photos and record videos/audio clips in this mode.  
Playback Mode  
Press the Playback button  
after the camera is turned on to view and edit  
captured images or playback videos and audio clips. The recording of voice memo  
attached to images is available in this mode.  
Record mode  
7
Using the Touch Screen  
The touch screen shows all important information regarding camera settings as well as  
the visual image of your image or video. It also provides all kinds of touch buttons to  
control the settings for the camera. The display on the touch screen is called the On  
Screen Display or OSD.  
Touch screen Layout  
- Photo Mode Screen Layout:  
No. Item  
Description  
1
2
AF lamp  
Indicates AF lamp is enabled.  
Display focus area settings  
Use to frame subject to capture.  
3
4
5
Zoom indicator  
Shots remaining  
Battery  
Displays zoom type and level.  
Indicates the remaining shots available.  
Indicates approximate battery level.  
Indicates current storage media in use.  
Options are Internal memory and SD/SDHC memory card.  
6
Storage media  
8
Indicates that the camera is moving too much that may result  
in image blur. Use of a tripod or steady hand may be required  
7
Shake warning  
8
Touch button – AF area/Face tracking  
Touch button - Display  
Image Stabilizer  
Resolution  
Tap to display the AF area/face tracking popup menu.  
Tap to switch the display mode of the LCD monitor.  
Indicates if the image stabilizer function is enabled.  
Displays photo resolution settings.  
Displays quality settings.  
9
11  
11  
12  
13  
14  
15  
16  
17  
18  
19  
21  
Quality  
Sharpness  
Displays sharpness settings.  
Metering  
Displays metering settings.  
White balance  
Contrast  
Displays white balance settings.  
Displays contrast settings.  
Saturation  
Displays saturation settings.  
Exposure  
Displays exposure settings.  
ISO  
Displays ISO settings.  
Shutter speed  
Displays shutter speed settings.  
21  
Aperture value  
Displays aperture settings.  
22  
23  
Touch button - Menu  
Touch button - Macro  
Tap to launch record menu  
Tap to display the macro popup menu.  
24  
Touch button - Self-timer/Burst  
Tap to display the self-timer/burst popup menu.  
25  
26  
27  
AEB  
Indicates AEB function is enabled  
Tap to popup the flash menu.  
Touch button - Flash  
Touch button - Record mode  
Tap to launch the scene mode menu.  
9
Playback Mode Screen Layout  
The Playback mode display varies depending on the type of image being viewed.  
- Playback mode display of still images:  
No.  
Item  
Description  
Indicates the file number over the total number of files in the  
internal memory or SD/SDHC memory card.  
1
2
3
File no./Total no.  
Battery  
Indicates approximate battery level.  
Indicates current storage memory. Options are internal camera  
memory or SD/SDHC memory card.  
Storage media  
4
5
6
7
8
9
Touch button - Next file  
Touch button - Display  
Aperture value  
Shutter speed  
Tap to view the next file.  
Tap to switch the display mode of the LCD monitor.  
Displays aperture value of the image.  
Displays shutter speed setting of the image  
Displays flash setting of the image.  
Flash  
White balance  
Displays white balance setting of the image.  
10  
11  
11  
12  
13  
14  
ISO  
Displays ISO setting of the image.  
Exposure  
Folder/Filename  
Date & Time  
DPOF  
Displays exposure setting of the image.  
Indicate the location/filename of the image  
Displays the recorded date & time of the image.  
Indicates the file is marked for printing.  
15  
Resolution  
Displays the photo resolution setting at the time it was taken.  
16  
17  
18  
19  
21  
Touch button - Menu  
Voice memo  
Tap to launch playback menu.  
Tap to record an attached voice memo for the image.  
Tap to view the previous file.  
Touch button - Previous file  
Protect  
Indicates file is protected.  
Playback mode  
Indicates playback mode.  
11  
Taking Photos  
This camera is designed to make the experience of taking photos simple and quick. It’s  
Auto mode feature will optimise the internal settings so that in most situations, it can  
take photos with ease. This camera also has additional modes and features that extend  
the capabilities for the more experienced user.  
1. Power on the camera by pressing the Power  
button  
.
2. Frame the shot using the focus bracket on the  
LCD monitor. See illustration on the right.  
3. Lightly pressing the Shutter button  
down to the halfway position will start the automatic  
focus and adjustments to the exposure level.  
When the camera has successfully completed this  
automatic routine, the focus bracket will turn green.  
If the automatic focus and exposure routine is not  
successful, the bracket will turn red. If this occurs,  
simply release the shutter and repeat this step until  
the bracket turns green. In some situations, lighting  
and contrast may be insufficient for the camera to  
successfully complete the auto focus and exposure  
level routine. If this occurs, try better lighting.  
4. Pressing the Shutter button  
down fully will take the photo. If you take the  
photo when the bracket is red, the focus and exposure may not be correct.  
If the shake warning icon  
appears, hold the camera steadily, with your arms at your  
side or use a tripod to stabilize the camera to reduce the risk of blurred photos.  
12  
Setting the Scene Mode  
By simply selecting one of the following 31 modes, you can capture the image with the  
most appropriate settings.  
1. From the Record MENU button  
, tap to select Scene Mode. Or, tap onscreen  
Record mode button (red color) to enter scene mode.  
2. Use the and to move through the selections.  
3. The highlighted scene mode will either have text that describes the benefits of the  
mode or have a sidebysidephoto comparison that illustrates the benefits. The photo on  
the left is a typical auto mode result and the photo on the right illustrates the benefit of  
selecting that scene mode. It is important to note that by selecting a particular scene mode  
(other that Auto) will take the camera out of it’s normal automatic settings capabilities and  
therefore optimise various settings that match a specific scene.  
4. Press the  
to save and activate the selected scene mode.  
5. It is important to return the camera to the Auto mode when finished shooting specifics  
conditions. This will reduce the risk of taking a bad photo in normal situations. If the  
camera is powered off and then powered on, it will return to Auto scene mode be default.  
13  
Playback  
You can playback the still images, videos and audio clips on the LCD monitor.  
File Navigation  
There are 4 playback modes for file navigation in this camera:  
Single navigation  
Photo Steam  
Thumbnail  
Calendar  
Viewing in Single Navigation Mode  
The single navigation mode displays the image one by one on the LCD monitor. To view  
images/videos/audio clips, follow the steps below:  
1. Press the Playback button  
on the camera.  
2. The LCD monitor displays an image. To understand the icons and other information on  
the screen  
Still Image  
Movie  
Audio Clip  
14  
3. Tap the  
or  
onscreen buttons to view next/previous image/video/audio.  
4. To play a movie or audio clip, tap the onscreen Play button  
.
Delete  
The Delete function allows to remove unwanted files in the internal memory or on the  
memory card. Protected files cannot be erased, to delete, unprotect the file first.  
- To delete a photo/video/audio clip:  
1. Set the camera to Playback mode and locate the desired image by single navigation or  
photo stream mode.  
2. Tap the onscreen MENU button  
to launch playback menu and tap Delete. Or,  
tap the onscreen  
button from photo steam mode.  
- Available settings are as follow:  
Single. Select one file to delete.  
Voice Only. Delete the attached voice memo  
only, not voice clips. The image is still retained in  
the memory.  
Multi. Select multiple files to delete at the  
same time.  
All. Delete all files.  
15  
Using the Setup Menu  
You can access the Setup menu whether you are in Record or Playback mode.  
The Setup menu allows you to configure general camera settings.  
- To go to Setup Menu:  
1. Tap the onscreen Menu button  
2. Tap the tab button to launch Setup menu.  
3. Tap or to turn pages.  
to launch the Record/Playback Menu.  
4. Tap the desired option button to enter submenu.  
5. Configure the settings in the submenu.  
6. Press the onscreen  
7. Tap the or  
button to save and apply changed settings.  
button to exit the menu or return main menu anytime.  
16  
Getting Help  
Should you have a technical support question or your HP Digital Camera require  
service within the warranty period, please contact the original point of purchase  
or an authorized HP reseller in your country. If service is not available at those  
locations, please contact an HP Branded Product warranty agent from the support  
contact list provided below. A service agent will work with you to troubleshoot  
your issue and if necessary, issue a Return Material Authorization (RMA) number  
in order to replace your HP Branded Product. For warranty claims, you will be  
required to provide a copy of your original dated sales receipt as proof of purchase  
and the issued RMA number. You will be responsible for shipping charges when  
shipping the product to the service center. The service agent will provide you  
with an address and you will also be responsible for any shipping charges to the  
warranty service center. Once your product is received by this service center, a  
replacement unit will be shipped back to you typically within 5 business days.  
Contact/phone Support:  
Language  
Contact/phone Support:  
Chinese  
Japanese  
Korean  
Deutsch  
English  
Español  
Français  
Italiano  
Nederlandsk  
Português  
Svenska  
17  
Contact/phone Support:  
Country  
Europe Region (EMEA)  
België  
Language  
Number  
Nederlandsk/ Deutsch  
Deutsch  
+ 32 2711 1724  
+ 49 6951173896  
+ 34 914533458  
+ 33 171231454  
+ 353 1851882116  
+ 39 269682189  
+ 31 212115193  
+ 41 18119686  
Deutschland  
España  
Español  
France  
Français  
Ireland  
English  
Italia  
Italiano  
Nederland  
Schweiz  
Nederlandsk  
Deutsch/ Français/ Italiano  
English  
UK  
+ 44 2173652411  
North America  
United States  
Canada  
English  
1.866.694.7633  
1.866.694.7633  
Number  
English and French  
Language City  
Country  
Mexico City  
52.55.1214.8185  
México  
Español  
Guadalajara  
Monterrey  
Caracas  
52.33.1131.3872  
52.81.1117.2639  
58.212.335.4574  
57.1.518.2325  
Venezuela  
Colombia  
Perú  
Español  
Español  
Español  
Español  
Argentina  
Español  
Perú  
Lima  
51.1.715.6232  
Chile  
Santiago  
Sao Paolo  
Buenos Aires  
55.11.5514.6633  
55.11.5514.6633  
54.11.6191.2399  
Brasil  
Argentina  
18  
P/N: 7525C00171A  

Brodit 215345 User Manual
Canon CR 1 MARK II User Manual
Citizen Systems Calculator SDC 435N User Manual
H2O Audio Interval iSH3 5A1 User Manual
Hifionics ZXI60 4+1K User Manual
Imperial Range 48BR User Manual
Infinity KAPPA SERIES 462 3CFP User Manual
Jensen JMD200 User Manual
JL Audio Stealthbox 94376 User Manual
JVC CH X1500 User Manual