Sony Home Theater System 4 184 716 511 User Manual

4-184-716-51(1)  
Blu-ray Disc/DVD  
Home Theatre System  
Operating Instructions  
BDV-F700 / F500  
© 2010 Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
equipment sold in countries  
applying EU directives.  
caution message of any other  
device used with, or Blu-ray Disc  
contents played with this product  
and (ii) our website (for customers  
• Java and all Java-based  
trademarks and logos are  
trademarks or registered  
trademarks of Sun Microsystems,  
Inc.  
The manufacturer of this product is  
Sony Corporation, 1-7-1 Konan  
Minato-ku Tokyo, 108-0075 Japan.  
The Authorized Representative for  
EMC and product safety is Sony  
Deutschland GmbH, Hedelfinger  
Strasse 61, 70327 Stuttgart,  
europe.com/myproduct/; for  
• “BD-LIVE” and  
customers in Latin America: http://  
esupport.sony.com/) for the latest  
information. The vision of young  
children (especially those under six  
years old) is still under  
development. Consult your doctor  
(such as a pediatrician or eye  
doctor) before allowing young  
children to watch 3D video images.  
Adults should supervise young  
children to ensure they follow the  
recommendations listed above.  
“BONUSVIEW” are trademarks  
of Blu-ray Disc Association.  
• “Blu-ray Disc” is a trademark.  
• “Blu-ray Disc,” “DVD+RW,”  
“DVD-RW,” “DVD+R,” “DVD-  
R,” “DVD VIDEO,” and “CD”  
logos are trademarks.  
Germany. For any service or  
guarantee matters please refer to  
the addresses given in separate  
service or guarantee documents.  
• “Blu-ray 3D” and “Blu-ray 3D”  
logo are trademarks of Blu-ray  
Disc Association.  
Precautions  
This equipment has been tested and  
found to comply with the limits set  
out in the EMC Directive using a  
connection cable shorter than 3  
meters. (European models only)  
• “BRAVIA” is a trademark of  
Sony Corporation.  
• “AVCHD” and the “AVCHD”  
logo are trademarks of Matsushita  
Electric Industrial Co., Ltd. and  
Sony Corporation.  
Copyrights and  
Trademarks  
• This system incorporates with  
Dolby* Digital and the DTS**  
Digital Surround System.  
* Manufacturedunder license  
from Dolby Laboratories.  
Dolby and the double-D  
symbol are trademarks of  
Dolby Laboratories.  
On power sources  
, “XMB,” and “xross media  
bar” are trademarks of Sony  
Corporation and Sony Computer  
Entertainment Inc.  
• The unit is not disconnected from  
the mains as long as it is  
connected to the AC outlet, even  
if the unit itself has been turned  
off.  
• “PLAYSTATIONis a trademark  
of Sony Computer Entertainment  
Inc.  
• As the main plug is used to  
disconnect the unit from the  
mains, connect the unit to an  
easily accessible AC outlet.  
Should you notice an abnormality  
in the unit, disconnect the main  
plug from the AC outlet  
immediately.  
®
®
**Manufacturedunder license  
under U.S. Patent #’s:  
5,451,942; 5,956,674;  
5,974,380; 5,978,762;  
6,226,616; 6,487,535;  
• DivX , DivX Certified and  
associated logos are registered  
trademarks of DivX, Inc. and are  
used under license.  
• Music and video recognition  
technology and related data are  
7,212,872; 7,333,929;  
7,392,195; 7,272,567 &  
other U.S. and worldwide  
patents issued & pending.  
DTS and the Symbol are  
registered trademarks, &  
DTS-HD, DTS-HD Master  
Audio, and the DTS logos  
are trademarks of DTS, Inc.  
Product includes software.  
© DTS, Inc. All Rights  
Reserved.  
®
provided by Gracenote .  
Gracenote is the industry standard  
in music recognition technology  
and related content delivery. For  
more information, please visit  
CD, DVD, Blu-ray Disc, and  
music and video-related data from  
Gracenote, Inc., copyright ©  
2000-present Gracenote.  
Gracenote Software, copyright ©  
2000-present Gracenote. One or  
more patents owned by Gracenote  
apply to this product and service.  
See the Gracenote website for a  
nonexhaustive list of applicable  
Gracenote patents. Gracenote,  
CDDB, MusicID, MediaVOCS,  
the Gracenote logo and logotype,  
and the “Powered by Gracenote”  
On watching 3D video  
images  
Some people may experience  
discomfort (such as eye strain,  
fatigue, or nausea) while watching  
3D video images. Sony  
recommends that all viewers take  
regular breaks while watching 3D  
video images. The length and  
frequency of necessary breaks will  
vary from person to person. You  
must decide what works best. If you  
experience any discomfort, you  
should stop watching the 3D video  
images until the discomfort ends;  
consult a doctor if you believe  
necessary. You should also review  
(i) the instruction manual and/or the  
• This system incorporates High-  
Definition Multimedia Interface  
(HDMITM) technology.  
HDMI, the HDMI logo and High-  
Definition Multimedia Interface  
are trademarks or registered  
trademarks of HDMI Licensing  
LLC.  
GB  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
logo are either registered  
trademarks or trademarks of  
Gracenote in the United States  
and/or other countries.  
About These  
Operating  
Instructions  
• The instructions in these  
Operating Instructions  
• “PhotoTV HD” and the “PhotoTV  
HD” logo are trademarks of Sony  
Corporation.  
describe the controls on the  
remote. You can also use the  
controls on the unit if they  
have the same or similar  
names as those on the remote.  
• In this manual, “disc” is used  
as a general reference for  
BDs, DVDs, Super Audio  
CDs, or CDs unless otherwise  
specified by the text or  
illustrations.  
• MPEG Layer-3 audio coding  
technology and patents licensed  
from Fraunhofer IIS and  
Thomson.  
• iPod is a trademark of Apple Inc.,  
registered in the U.S. and other  
countries.  
• “Made for iPod” means that an  
electronic accessory has been  
designed to connect specifically  
to iPod and has been certified by  
the developer to meet Apple  
performance standards.  
• The instructions in this  
manual are for BDV-F700  
and BDV-F500. BDV-F700  
is the model used for  
illustration purposes except  
where indicated. Any  
• Apple is not responsible for the  
operation of this device or its  
compliance with safety and  
regulatory standards.  
• Windows Media is either a  
registered trademark or trademark  
of Microsoft Corporation in the  
United States and/or other  
countries.  
difference in operation is  
clearly indicated in the text,  
for example, “BDV-F700.”  
• The items displayed on the  
TV screen may vary  
depending on the area.  
• The default setting is  
underlined.  
®
• DLNA , the DLNA Logo and  
DLNA CERTIFIED™ are  
trademarks, service marks, or  
certification marks of the Digital  
Living Network Alliance.  
• Other system and product names  
are generally trademarks or  
registered trademarks of the  
manufacturers. ™ and ® marks  
are not indicated in this document.  
GB  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Table of Contents  
Step 3: Performing the Easy  
Step 5: Enjoying Surround  
Selecting the Effect to Suit  
the Source .......................................41  
Selecting the Audio Format, Multilingual  
Tracks, or Channel..........................41  
Enjoying Multiplex Broadcast  
Sound..............................................42  
Using the Radio Data System  
(RDS)..............................................44  
Using the Control for HDMI Function for  
“BRAVIA” Sync ............................45  
Changing the Illumination LED Lighting  
Type................................................48  
Deactivating the Buttons on  
the Unit ...........................................49  
Controlling Your TV with the Supplied  
Remote............................................50  
GB  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unpacking  
BDV-F700  
• Unit (1)  
• Front speaker stands (2)  
• Screws (2)  
• Speaker cords (3, white/red/  
purple)  
• Front speakers (2)  
• FM wire antenna (aerial) (1)  
or  
• Cable tie (1)  
• Floor bases (2)  
• Remote commander  
(remote) (1)  
• Subwoofer (1)  
• Desktop bases (2)  
• Base adapters (2)  
• R6 (size AA) batteries (2)  
• Operating Instructions  
• Speaker Installation Guide  
• Quick Setup Guide  
• Screws (with washer) (4)  
• End user license agreement  
GB  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
BDV-F500  
• Unit (1)  
• Speaker cord (1, purple)  
• Cable tie (1)  
• Remote commander  
(remote) (1)  
• HDMI cable (1)  
(Latin American models only)  
• Front speakers (2)  
• R6 (size AA) batteries (2)  
• Operating Instructions  
• Quick Setup Guide  
• Subwoofer (1)  
• FM wire antenna (aerial) (1)  
• End user license agreement  
or  
Preparing the remote  
Insert two R6 (size AA) batteries (supplied) by matching the 3 and # ends on the batteries to the  
markings inside the compartment.  
GB  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index to Parts and Control  
For more information, refer to the pages indicated in parentheses.  
Unit  
VOL  
Left side  
A Ventilation slots  
D
(remote sensor)  
B VOL (volume) +/–  
E Illumination LED (page 48)  
Adjusts the system’s volume.  
F
(USB) port (left) (page 35)  
Used for connecting a USB device.  
C Front panel display  
GB  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
ANTENNA  
LAN(100)  
FM75  
COAXIAL  
VIDEO  
OUT  
LA  
N
(1  
00  
)
A
N
TE  
N
N
A
AUDIO  
L
IN  
R
VID  
EO  
FM75  
IAL  
O
U
C
O
T
AX  
AU  
D
IO  
L
IN  
R
ARC  
AR  
C
SA  
T/  
SAT/  
CABLE  
CA  
BL  
E
H
D
M
I
O
U
T
TV  
HDMI  
OUT  
DIGIT  
AL IN  
(OPTICAL)  
TV  
DIGITAL IN  
(OPTICAL)  
A
"/1 (on/standby)  
Turns on the unit, or sets it to standby mode.  
D LAN (100) terminal (page 27)  
E VIDEO OUT jack (page 23)  
F HDMI OUT jack (page 23)  
B Disc slot (page 34)  
C Play operation buttons  
G
(USB) port (right) (page 35)  
Used for connecting a USB device.  
N (play)  
Starts or re-starts playback (resume play).  
Plays a slideshow when a disc containing  
JPEG image files is inserted.  
H TV (DIGITAL IN OPTICAL) jack (page  
I SAT/CABLE (DIGITAL IN OPTICAL)  
jack (page 25)  
x (stop)  
Stops playback and remembers the stop  
point (resume point).  
J AUDIO (IN L/R) jacks (page 25)  
K ANTENNA (FM 75Ω COAXIAL) jack  
The resume point for a title/track is the last  
point you played or the last photo for a  
photo folder.  
(page 26)  
FUNCTION  
Selects the playback source.  
Z (eject)  
Ejects the disc.  
GB  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
FRONT  
R
FRONT L SUBWOOFER  
SPEAKERS  
A Ventilation slots  
B SPEAKERS jacks (page 20)  
GB  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front panel display  
About the indications in the front panel display  
SLEEP  
PARTY  
TUNED MONO  
STEREO  
HDMI  
HD  
24P  
2CH MUTING  
NEO:6  
WIDE STAGE  
A Lights up when the system is playing  
I Lights up during playback with “2CH  
via the PARTY STREAMING function.  
STEREO.”  
B Flashes when the sleep timer is set.  
J Lights up when the sound of the  
system is muted.  
C Lights up when a station is received.  
K Lights up when outputting DTS Neo:6  
(Radio only) (page 43)  
mode sound.  
D Lights up when “FM MODE” is set to  
L Lights up during playback with “WIDE  
“MONO.” (Radio only) (page 43)  
STAGE” surround sound effect.  
E Lights up when stereo sound is  
M Lights up when a disc is loaded.  
received. (Radio only) (page 43)  
N Displays system’s status such as  
chapter, title, or track number, time  
information, radio frequency, playing  
status, etc.  
F Lights up when the HDMI OUT jack is  
correctly connected to an HDCP (High-  
bandwidth Digital Content Protection)-  
compliant device with HDMI or DVI  
(Digital Visual Interface) input.  
O Lights up when repeat play is  
activated.  
G Lights up when outputting 720p/1080i/  
1080p video signals from the HDMI  
OUT jack.  
P Displays system’s playing status.  
H Lights up when outputting 1920 ×  
1080p/24 Hz video signals.  
GB  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
B Number buttons (pages 44, 50)  
Enters the title/chapter numbers, radio  
frequencies, etc.  
Remote control  
(audio) (pages 41, 42)  
Selects the audio format/track.  
ONE-TOUCH TV  
THEATRE  
PLAY  
1
2
(subtitle) (page 54)  
BRAVIA Sync  
Selects the subtitle language when  
multilingual subtitles are recorded on a BD-  
ROM/DVD VIDEO.  
1
2
5
8
0
3
6
9
SLEEP  
4
7
SYSTEM  
MENU  
9
D.TUNING (direct tuning) (page 43)  
Selects the radio frequencies.  
D.TUNING  
C Color buttons (red/green/yellow/blue)  
Short cut keys for selecting items on some  
BD menus (can also be used for Java  
interactive operations on BDs).  
3
4
TOP MENU  
POP UP/ MENU  
RETURN  
OPTIONS  
D TOP MENU  
Opens or closes the BD’s or DVD’s Top  
Menu on the TV screen.  
FUNCTION  
SOUND MODE  
5
6
HOME  
PRESET  
TUNING  
DISPLAY  
PRESET  
TUNING  
POP UP/MENU  
Opens or closes the BD-ROM’s Pop-up  
Menu, or the DVD’s menu.  
8
OPTIONS (page 39)  
Displays the options menu on the TV  
screen.  
TV  
TV  
7
RETURN  
Returns to the previous display.  
Number 5,  
, 2 +, and N buttons have a  
C/X/x/c  
tactile dot. Use the tactile dot as a reference  
when operating the remote.  
Moves the highlight to a displayed item.  
(ENTER)  
: For TV operations  
Enters the selected item.  
E FUNCTION (pages 31, 43)  
Selects the playback source.  
HOME (pages 30, 43, 47, 51)  
Enters or exits the system’s home menu on  
the TV screen.  
Switches to the optimum video mode for  
watching movies automatically.  
SOUND MODE (page 41)  
Selects the sound mode.  
ONE-TOUCH PLAY (page 46)  
Activates One-Touch Play.  
TV "/1 (on/standby) (page 50)  
Turns on the TV or sets it to standby mode.  
"/1 (on/standby) (pages 30, 43)  
Turns on the system or sets it to standby  
mode.  
GB  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
F Playback operation buttons  
H DISPLAY (pages 34, 36)  
Displays the playback information on the  
TV screen.  
./> (previous/next)  
Skip to the previous/next chapter, track, or  
file.  
When the function is “TUNER FM,”  
changes the radio information in the front  
panel display (European models only).  
When the function is “TV” or “SAT/  
CABLE” and digital signals are input via  
the TV (DIGITAL IN OPTICAL) or SAT/  
CABLE (DIGITAL IN OPTICAL) jack,  
displays the stream information in the front  
panel display.  
(replay/advance)  
Briefly replay the current scenes for 10  
seconds. / Briefly fast forwards the current  
scenes for 15 seconds.  
m/M (fast reverse/fast forward)  
Fast reverse/fast forward the disc during  
playback. Each time you press the button,  
search speed changes.  
I
Z (eject)  
Ejects the disc.  
Activates slow-motion play when pressed  
for more than one second in pause mode.  
Plays one frame at a time when pressed in  
pause mode.  
SLEEP (page 48)  
Sets the sleep timer.  
SYSTEM MENU (pages 32, 40, 43, 48)  
Enters or exits the system menu in the front  
panel display.  
N (play)  
Starts or re-starts playback (resume play).  
Plays a slideshow when a disc containing  
JPEG image files is inserted.  
(favorites)  
Displays the Internet contents added to the  
Favorites List. You can save 18 favorite  
Internet contents.  
X (pause)  
Pauses or re-starts playback.  
x (stop)  
Stops playback and remembers the stop  
point (resume point). The resume point for  
a title/track is the last point you played or  
the last photo for a photo folder.  
Radio operation buttons  
PRESET +/–  
TUNING +/–  
G
(muting)  
Turns off the sound temporarily.  
2 (volume) +/– (page 43)  
Adjusts the volume.  
TV 2 (volume) +/–  
Adjusts the TV volume.  
TV t (TV input)  
Switches the TV’s input source between the  
TV and other input sources.  
GB  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Step 1: Installing the System  
Positioning the speakers  
For the best possible sound, place the front speakers at the same distance from the listening position  
(A). Place the system as illustrated below.  
For BDV-F700  
A Front left speaker (L)  
B Front right speaker (R)  
C Subwoofer  
B
A
D Unit  
C
D
A
A
For BDV-F500  
A Front left speaker (L)  
B Front right speaker (R)  
C Subwoofer  
B
D Unit  
A
D
C
A
A
GB  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Note  
• Place the speakers on a flat and firm floor (not on thick pile carpet, for example).  
• Leave a space for inserting/ejecting the disc (approximately 15 cm) to the right (disc slot) side of the unit when  
placing an object nearby.  
Approximately 15 cm  
• Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed,  
oiled, polished, etc.) floor, as staining or discoloration may result.  
• Do not lean or hang on a speaker, as it may fall down.  
• Image distortion on the TV screen may occur depending on the location of the subwoofer. In this case, place the  
subwoofer away from the TV.  
• Do not block the ventilation slots of the unit (page 8).  
• Place both front speakers the same distance apart from the listening position.  
• The front speakers should be placed at least 0.6 m apart.  
• Place the front speakers forward from the TV. Make sure there are no reflecting obstacles in front of the speakers.  
• Both front speakers should be pointed straight forward. Do not place the speakers at an angle.  
To set the speakers at a vertical angle  
(BDV-F500 only)  
You can select the angle for the front speaker: vertical or upward. (The speakers are set to an upward  
angle at the factory.)  
1
Remove the screws (pre-installed) at the bottom of the speaker.  
These screws are used when reassembling the speaker. Be sure not to lose the screws.  
Screws  
2
Detach the speaker stand.  
GB  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Reattach the speaker stand by engaging the protrusions on the stand in the holes for  
either a vertical or upward angle.  
Vertical or  
upward angle  
Vertical angle  
Upward angle  
4
5
Thread the speaker cord though the slit of the stand base to prevent the cord from being  
twisted or pinched.  
Tighten the screws to secure the speaker stand.  
Screws  
Note  
• Be careful not to pinch the speaker cords while tightening the screws.  
Assembling the speakers  
(BDV-F700 only)  
For assembling the speakers, refer to “Speaker Installation Guide.”  
GB  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When installing the speakers on a wall  
Caution  
• Contact a screw shop or installer regarding the wall material or screws to be used.  
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach  
the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where  
reinforcement is applied.  
• Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or  
improper screw installation, natural calamity, etc.  
Required preparation for BDV-F500  
You cannot install the speaker with the speaker stand attached. Be sure to remove the speaker stand  
before installing the speaker on a wall.  
1
2
Remove the screws (pre-installed) at the bottom of the speaker.  
These screws are used when reassembling the speaker. Be sure not to lose the screws.  
Screws  
Detach the speaker stand.  
GB  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
4
Disconnect the speaker cord from the speaker.  
Take the speaker stand out.  
Fully-disassembled illustration  
Speaker  
Speaker stand  
Speaker cord  
Screws  
To install the speakers on a wall for BDV-F700/BDV-F500  
Before installing the speakers on a wall, connect the speaker cord to the speaker.  
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with  
the color tube to 3, and the speaker cord without the color tube to #.  
Color tube  
Front left speaker (L): White  
Front right speaker (R): Red  
GB  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Prepare screws (not supplied) that are suitable for the hole on the back of each speaker.  
See the illustrations below.  
Hole on the back of  
the speaker  
4 mm  
5 mm  
30 mm  
10 mm  
Note  
• The length and type of the screw are examples. Select screws in accordance with the material or strength of  
the wall to which you install the speakers.  
2
3
Fasten the screws to the wall.  
8 to 10 mm  
Hang the speakers on the screws.  
Hole on the back of  
the speaker  
5 mm  
10 mm  
Rear of the speaker  
Note  
• Be careful not to pinch the speaker cords while tightening the screws.  
GB  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 2: Connecting the System  
For connecting the system, read the information on the following pages.  
Do not connect the AC power cord (mains lead) of the unit to a wall outlet (mains) until all the other  
connections are made.  
Note  
• When you connect another component with a volume control, turn down the volume of the other components to a  
level where sound is not distorted.  
To remove the panel cover of the unit  
Before connecting the cables, remove the panel cover from the unit.  
A
Hold the panel cover at (A), then slide it out to  
the side.  
Note  
• Before using the unit, remove the seal attached at the lower rear of the unit.  
Connecting the speakers  
The connector of the speaker cords and the color tube are color-coded depending on the type of speaker.  
Connect the speaker cords to match the color of the SPEAKERS jacks of the unit.  
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with  
the color tube to 3, and the speaker cord without the color tube to #. Do not catch the speaker cord  
insulation (rubber covering) in the speaker terminals.  
GB  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
To connect speaker cords to the unit  
Fully insert the speaker cord connectors into the unit.  
White  
(Front left speaker (L))  
F
O
O
W  
T
N
L
R
T
N
O
FR  
E
K
Purple  
(Subwoofer)  
Red  
(Front right speaker (R))  
Note  
• Make sure to place the unit on a soft thick cloth to prevent damaging the unit.  
To connect the speaker cord to the subwoofer  
1
Connect the speaker cord to the subwoofer.  
Bottom of the subwoofer  
Color tube (purple)  
GB  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Thread the speaker cord through the gap along the side of the subwoofer, and secure it  
in the speaker cord holder.  
GB  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the TV (Video connection)  
This connection sends a video signal to the TV.  
Depending on the jacks on your TV, select the connection method.  
B Video cord  
(not supplied)  
To the video input  
jack of the TV.  
VIDEO  
OUT  
VIDEO  
OUT  
ARC  
A
R
C
HDMI  
OUT  
HDMI  
OUT  
To the HDMI IN jack  
of the TV.  
A HDMI cable*  
* The HDMI cable is supplied with Latin American models only.  
Method 1: HDMI cable (A) connection  
If your TV has an HDMI jack, connect to the TV with an HDMI cable. Picture quality will be improved  
compared to using the video cord connection.  
When connecting with the HDMI cable, you need to select the type of output signal (pages 52).  
Method 2: Video cord (B) connection  
If you do not have an HDMI cable, temporarily make this connection.  
GB  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting the TV (Audio connection)  
This connection sends an audio signal to the unit from the TV. To listen to TV sound via the system,  
perform this connection.  
With a digital audio connection, the system receives a Dolby Digital multiplex broadcast signal and  
you can enjoy multiplex broadcast sound.  
Digital optical cord  
(not supplied)  
SAT/  
CABLE  
S
A
T
/
C
A
B
L
E
TV  
T
V
D
IG  
T
IT  
A
L
I
N
(O  
P
IC  
A
L
)
DIGITAL IN  
(OPTICAL)  
To the digital optical out  
jack of the TV.  
About Audio Return Channel (ARC)  
If your TV is compatible with the Audio Return Channel function, an HDMI cable connection also  
sends a digital audio signal from the TV. You do not need to make a separate audio connection for  
listening to TV sound. For details of the Audio Return Channel function, see [Audio Return Channel]  
GB  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Connecting the other components  
When you connect the system and other components to the TV, video signals from the system and the  
components are sent to the TV, and audio signals from the components are sent to the system as  
follows.  
TV  
VCR or digital satellite  
receiver, etc.  
Video signal  
Video signal  
Audio signal  
System  
You can enjoy connected components via the system’s speakers.  
• VCR or digital satellite receiver, etc. (not supplied), which has a digital optical output jack: C  
• VCR, digital satellite receiver, PlayStation, or portable audio source, etc. (not supplied): D  
D Audio cord  
(not supplied)  
To the audio out jacks of  
the VCR, digital satellite  
receiver, PlayStation, or  
portable audio source, etc.  
AUDIO  
L
IN  
R
AU  
D
IO  
IN  
SAT/  
CABLE  
S
A
T
/
C
A
B
L
E
TV  
To the digital optical out jack  
of the VCR or digital satellite  
receiver, etc.  
T
V
D
IG  
T
IT  
A
L
I
N
(O  
P
IC  
A
L
)
DIGITAL IN  
(OPTICAL)  
C Digital optical cord  
(not supplied)  
GB  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting the antenna (aerial)  
To connect the antenna (aerial)  
A
N
T
E
N
N
A
ANTENNA  
F
M
75  
CO  
A
X
IAL  
FM75  
COAXIAL  
FM wire antenna (aerial)  
(supplied)  
or  
Tip  
• If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the unit to an outdoor FM  
antenna (aerial) as shown below.  
Unit  
ANTENNA  
Outdoor FM antenna (aerial)  
FM75  
COAXIAL  
GB  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Wireless LAN Adapter and the wireless LAN router  
closer to each other.  
Connecting to the network  
To set the network settings  
Wired Setup  
Use a LAN cable to connect to the LAN (100)  
terminal on the unit.  
For details, see [Network Settings] (page 56)  
and follow the on-screen instructions to  
complete the setup.  
Unit  
About wireless LAN security  
Since communication via the wireless LAN  
function is established by radio waves, the  
wireless signal may be susceptible to  
interception. To protect wireless  
LAN cable  
(not supplied)  
communication, this system supports various  
security functions. Be sure to correctly  
configure the security settings in accordance  
with your network environment.  
Internet  
Broadband  
router  
ADSL modem/  
cable modem  
No Security  
USB Wireless Setup  
Although you can easily make settings, anyone  
can intercept wireless communication or intrude  
into your wireless network, even without any  
sophisticated tools. Keep in mind that there is a  
risk of unauthorized access or interception of  
data.  
Use a wireless LAN via the USB Wireless LAN  
Adapter (Sony UWA-BR100* only) (not  
supplied).  
The USB Wireless LAN Adapter may not be  
available in some regions/countries.  
* As of January 2010.  
WEP  
Turn the unit off before connecting the  
WEP applies security to communications to  
prevent outsiders from intercepting  
communications or intruding into your wireless  
network. WEP is a legacy security technology  
that enables older devices, which do not support  
TKIP/AES, to be connected.  
extension cable or inserting the USB Wireless  
LAN Adapter. After inserting the USB Wireless  
LAN Adapter to the base of the extension cable  
and connecting the extension cable to the  
(USB) port (left or right), turn the unit on again.  
Unit  
WPA-PSK (TKIP), WPA2-PSK (TKIP)  
TKIP is a security technology developed to  
correct for the deficiencies of WEP. TKIP  
assures a higher security level than WEP.  
WPA-PSK (AES), WPA2-PSK (AES)  
AES is a security technology that uses an  
advanced security method that is distinct from  
WEP and TKIP.  
AES assures a higher security level than WEP or  
TKIP.  
LAN cable  
USB  
(not supplied)  
Wireless  
LAN  
Adapter  
ADSL modem/ Wireless LAN  
cable modem router  
Internet  
Note  
• The placement distance between the USB Wireless  
LAN Adapter and your wireless LAN router differs  
depending on the usage environment. If the system  
cannot connect to the network or the network  
connection is unstable, move the USB Wireless LAN  
Adapter to a different position or place the USB  
GB  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Attaching the panel cover  
After connecting the cables, organize them and attach the panel cover by following the Steps below.  
1
Place the unit on its face.  
Note  
• Make sure to place the unit on a soft thick cloth to prevent damaging the unit.  
2
Bring together the cables (except the FM wire antenna (aerial)), thread them through the  
gap on the bottom of the unit, and then draw them around the rear support (A).  
T
TENA  
O
I
X
D
FM75  
C
O
I
AU  
X
D
LAN(10)  
L
F7M5  
IN  
CO  
R
V
O
AU  
T/  
SA  
LIN  
A
CABLE  
T
FER  
WOO  
D
NT  
L
     )
FRO  
LAN(10)  
NT  
R
L
FRO  
R
KE  
EA  
SP  
IN  
HDMI  
OUT  
R
V
OUT  
T/  
SA  
ALIN  
CBALE  
TV  
DIGT  
ON  
  )
F
T
R
ON  
FR  
E
S
HMDI  
OTU  
A
3
4
Thread the AC power cord (mains lead) through the gap on the bottom of the unit by  
securing it behind the tabs, and then draw it around the rear support (B).  
Tabs  
TENA  
O
I
X
D
FM75  
CO  
AU  
LAN(10)  
L
IN  
R
V
OUT  
T/  
SA  
LIN  
A
CABLE  
T
FER  
WOO  
L
D
NT  
     )
FRO  
NT  
R
FRO  
R
KE  
A  
HDMI  
OUT  
FER  
OO  
BW  
SU  
NT  
L
RO  
EAKER
P
B
Bundle the cables and the speaker cords with the cable tie.  
Cable tie (supplied)  
TENA  
O
I
X
D
FM75  
CO  
AU  
LAN(10)  
L
IN  
R
V
OUT  
T/  
SA  
LIN  
A
CABLE  
FER  
T
OO  
W  
SU  
L
D
T
N  
   )
FR  
T
R
ON  
FR  
R
KE  
EA  
S
HDMI  
OUT  
GB  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Attach the panel cover to the rear of the unit.  
Put the corner of the panel cover on (C), then slide it inward until it clicks into place.  
Thread the FM wire antenna (aerial) through the small indentation of the panel cover.  
FM wire antenna (aerial)  
C
L
A
N
(1  
0
0
)
T
E
N
N
A
F
M
75  
C
O
A
XIA  
L
A
U
D
IO  
IN  
Note  
• Be sure to fully extend the FM wire antenna (aerial).  
• After attaching the panel cover, keep the FM wire antenna (aerial) as horizontal as possible.  
To open the hatch of the panel cover  
If you connect a USB device (such as a USB memory) that has a long body to the side panel, open the  
hatch of the panel cover before you attach the panel cover. Be sure not to lose the hatch.  
Hatch  
To open the hatch, remove the panel cover, hold the hatch, and then pull it up and outward.  
To close the hatch, align the projection of the hatch with the projection opening on the panel cover, and  
then gently push in and down on the hatch until it clicks.  
To open the hatch  
To close the hatch  
GB  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To recall the Easy Setup Display  
Step 3: Performing the  
Easy Setup  
1
Press HOME.  
The home menu appears on the TV screen.  
2
3
Press C/c to select  
Press X/x to select [Easy Setup], then  
press  
[Setup].  
Before performing Step 3  
Make sure all connections are secure, and then  
connect the AC power cord (mains lead).  
Follow the Steps below to make the basic  
adjustments for using the system.  
Displayed items vary depending on the country  
model.  
.
4
Press C/c to select [Start], then press  
.
The Easy Setup Display appears.  
"/1  
1
4
7
2
5
8
0
3
6
9
C/X/x/c,  
HOME  
1
2
3
Turn on the TV.  
Press [/1 on the unit.  
Switch the input selector on your TV so  
that the signal from the system  
appears on the TV screen.  
The Easy Setup Display for OSD language  
selection appears.  
Easy Setup - OSD  
Select the language to be displayed by this unit.  
English  
Deutsch  
Français  
Italiano  
Español  
4
Perform the [Easy Setup]. Follow the  
on-screen instructions to make the  
basic settings using C/X/x/c, and  
.
GB  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Step 4: Selecting the  
Source  
You can select the playback source.  
1
4
7
2
5
8
0
3
6
9
FUNCTION  
Press FUNCTION repeatedly until the  
desired function appears in the front panel  
display.  
Each time you press FUNCTION, the function  
changes as follows.  
“BD/DVD” t “D. MEDIA” t “TUNER FM”  
t“TV” t “SAT/CABLE” t “AUDIO” t  
“BD/DVD” t …  
Function  
Source  
“BD/DVD”  
“D. MEDIA”  
Disc that is played by the system  
USB device, iPod, BRAVIA  
Internet Video, or DLNA server  
“TUNER FM”  
“TV”  
Component (TV, etc.) that is  
connected to the TV (DIGITAL  
IN OPTICAL) jack on the side  
panel, or a TV compatible with the  
Audio Return Channel function  
that is connected to the HDMI  
OUT jack on the side panel  
“SAT/CABLE” Component that is connected to  
the SAT/CABLE (DIGITAL IN  
OPTICAL) jack on the side panel  
“AUDIO”  
Component that is connected to  
the AUDIO (IN L/R) jacks on the  
GB  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Step 5: Enjoying Surround Sound  
After performing the previous Steps and starting playback, you can easily enjoy surround sound.  
Surround sound brings the exciting and powerful sound of movie theaters into your home.  
1
4
7
2
5
8
0
3
6
9
SYSTEM MENU  
X/x/c,  
Selecting surround settings based on your listening preference  
1
2
Press SYSTEM MENU.  
Press X/x repeatedly until “SUR.SETTING” appears in the front panel display, then  
press  
or c.  
3
Press X/x repeatedly until the surround setting you want appears in the front panel  
display.  
See the table below for surround sound setting descriptions.  
4
5
Press  
.
The setting is made.  
Press SYSTEM MENU.  
The system menu turns off.  
About speaker output  
The default setting is “AUTO.”  
Surround setting  
Effect  
“AUTO”  
The system outputs the sound with suitable effect automatically depending on the source.  
• 2 channel source: Outputs 2 channel sound as it is.  
• Multi-channel source: Simulates 7.1 or 5.1 surround sound with two front speakers and a  
subwoofer. The WIDE STAGE indicator on the front panel display lights up.  
“2CH STEREO”  
The system outputs 2 channel sound regardless of sound format or number of channels.  
Multi-channel surround formats are downmixed to 2 channels.  
To turn the surround sound effect off  
Select “2CH STEREO” for “SUR.SETTING.”  
GB  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Note  
• Depending on the input stream, the surround settings may not be effective.  
• When you play a Super Audio CD, surround settings are not activated.  
Tip  
• The system memorizes the last surround setting selected for each function.  
Whenever you select a function such as “BD/DVD” or “TUNER FM,” the surround setting that was last applied to  
the function is automatically applied again. For example, if you select “BD/DVD” with “AUTO” as the surround  
setting, then change to another function, and then return to “BD/DVD,” “AUTO” will be applied again.  
GB  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Insert a BD-ROM with BONUSVIEW/  
BD-LIVE.  
Playback  
The operation method differs depending on  
the disc. Refer to the operating instructions  
of the disc.  
Playing a Disc  
For playable discs, see “Playable Discs”  
Tip  
Delete unnecessary data in internal memory or  
USB memory. Select [Erase BD Data] in  
[Video] to delete unnecessary data. If you  
use USB memory as local storage, all saved  
data in the [BUDA/BUDB] folder is deleted.  
Make sure to backup any video/music/photo  
data in the [BUDA/BUDB] folder.  
1
2
Switch the input selector on your TV so  
that the signal from the system  
appears on your TV screen.  
Load a disc.  
Push the disc into the disc slot until the disc  
is pulled in automatically.  
Enjoying Blu-ray 3D  
Labeled side facing  
the front  
Note  
• If [3D Output Setting] (page 52) is not displayed on  
the TV screen, this function will be available via a  
future update.  
You can enjoy Blu-ray 3D Discs with the 3D  
logo*.  
*
appears on the home menu and playback  
starts.  
1
Prepare for Blu-ray 3D Disc playback.  
If playback does not start automatically,  
• Connect the system to your 3D-  
compatible TV using a High-Speed  
HDMI cable (not supplied).  
select  
in the  
[Video],  
[Music], or  
.
[Photo] category, and press  
• Set [3D Output Setting] and [TV Screen  
Size Setting for 3D] in [Screen Settings]  
Note  
• Do not load a disc while the unit is in standby  
mode.  
• Do not load a disc while the illumination LED is  
flashing just after you turn on the unit.  
• Insert the disc straight into the disc slot.  
2
Insert a Blu-ray 3D Disc.  
The operation method differs depending on  
the disc. Refer to the operating instructions  
supplied with the disc.  
Enjoying BONUSVIEW/BD-LIVE  
Tip  
• Refer also to the operating instructions of your 3D-  
compatible TV.  
Some BD-ROMs with “BD-LIVE Logo*” have  
bonus content and other data that can be  
downloaded for enjoyment.  
*
1
Prepare for BONUSVIEW/BD-LIVE.  
• Connect the unit to a network (page 27).  
• Set [BD Internet Connection] to [Allow]  
GB  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Displaying the play information  
Playing from a USB  
Device  
You can check the playback information, etc.,  
by pressing DISPLAY.  
The displayed information differs depending on  
the disc type and player status.  
You can play video/music/photo files on the  
connected USB device.  
For playable types of files, see “Playable Types  
Example: when playing a BD-ROM  
1
Connect the USB device to a  
port on the unit.  
(USB)  
Refer to the operating instructions of the  
USB device before connecting.  
Right  
USB device  
A
B
C
D
Output resolution/Video frequency  
Title number or name  
The currently selected audio setting  
Available functions (  
subtitle)  
angle,  
audio,  
Left  
E
Playback information  
Displays disc type, play mode, repeat status,  
video codec, bit rate, playing status bar,  
playing time, total time  
USB device  
F
G
Chapter number  
The currently selected angle  
2
3
Press C/c to select  
[Video],  
[Music], or  
[Photo].  
Press X/x to select  
[USB device  
(left)] or  
[USB device (right)], then  
press  
.
Note  
• Do not remove the USB device during  
operation. To avoid data corruption or damage  
to the USB device, turn the system off when  
connecting or removing the USB device.  
GB  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Press  
Operation  
Enjoying an iPod  
N, X  
Same operation as the N/X button  
of the iPod.  
You can enjoy the sound and charge the battery  
x
Pause.  
of an iPod via the system.  
m or M  
. or >  
Fast reverse or forward.  
Same operation as the . or >  
buttons of the iPod.  
Compatible iPod models  
The compatible iPod models are as follows.  
Update your iPod with the latest software before  
using with the system.  
DISPLAY,  
RETURN,  
C
Same operation as the MENU button  
of the iPod.  
X/x  
Same operation as the Click Wheel  
of the iPod.  
, c  
Same operation as the Center button  
of the iPod.  
Note  
• The iPod is charged when connected to the system  
while the system is turned on.  
• You cannot transfer songs onto the iPod.  
• Sony cannot accept responsibility in the event that  
data recorded to iPod is lost or damaged when using  
an iPod connected to this unit.  
• This product has been designed specifically to work  
with iPod and has been certified to meet Apple  
performance standards.  
• Do not remove the iPod during operation. To avoid  
data corruption or damage to the iPod, turn the system  
off when connecting or removing the iPod.  
1
Connect the iPod to a  
the unit with the iPod’s USB cable.  
(USB) port on  
Playing via a Network  
2
3
Press C/c to select [Music].  
Press X/x to select [iPod (left)] or  
[iPod (right)], then press  
Streaming BRAVIA Internet  
Video  
.
The sound from the iPod is played on the  
system.  
BRAVIA Internet Video serves as a gateway  
delivering the selected Internet content and a  
variety of on-demand entertainment straight to  
your unit.  
You can operate the iPod using the buttons  
on the remote.  
For operation details, refer to the operating  
instructions of the iPod.  
1
2
Prepare for BRAVIA Internet Video.  
To operate the iPod using the  
remote  
You can operate the iPod using the buttons on  
the remote. The following table shows an  
example of buttons that can be used.  
Connect the unit to a network (page 27).  
Press C/c to select  
[Video],  
[Music], or [Photo].  
GB  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
3
Press X/x to select an Internet content  
provider icon, then press  
3
Press X/x to select a DLNA server, then  
press  
.
.
When the Internet content list has not been  
retrieved, it will be represented by an  
unacquired icon or a new icon.  
The file list or folder list appears.  
Playing the same audio in  
different rooms (PARTY  
STREAMING)  
To use the control panel  
The control panel appears when the video file  
starts playing. The displayed items may differ  
depending on Internet content providers.  
To display again, press DISPLAY.  
Note  
• If [Party Auto Start] (page 57) is not displayed on the  
TV screen, this function may be available via a future  
update. However, the function may not be available  
in some regions/countries.  
A
B
Control display  
Press C/X/x/c or  
for playback operations.  
Playing status bar  
Status bar, cursor indicating the current  
position, playing time, duration of the video  
file  
C
D
The next video file name  
The currently selected video file name and  
rating  
You can play the same audio at the same time  
across all Sony components which are  
compatible with the PARTY STREAMING  
function.  
The component that plays audio for the party  
through the use of [Start Party] is called the  
“party host.” A component that is invited to the  
party from the party host and plays the same  
audio as the party host is called a “party guest.”  
Playing files stored on a DLNA  
server (DLNA Player)  
Note  
• If [Connection Server Settings] (page 56) is not  
displayed on the TV screen, this function will be  
available via a future update.  
To start a party  
(for the party host only)  
You can play video/music/photo files on your  
home server, such as a DLNA-certified network  
audio system or a PC with software that enables  
a DLNA-certified server function, by  
You can use other components to play the  
content that is playing on the system.  
1
Turn on the system and other Sony  
components compatible with the  
PARTY STREAMING function.  
connecting the system to your home network.  
1
Prepare for playing files on a DLNA  
server.  
Make sure that each component is  
connected to the network.  
• Connect the unit to a network (page 27).  
• Set [Connection Server Settings]  
2
Press C/X/x/c to select the audio  
content in  
[Music] or a radio station.  
2
Press C/c to select  
[Video],  
For selecting a radio station, see “Listening  
[Music], or [Photo].  
GB  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3
4
Press OPTIONS.  
Operating the system with a  
DLNA controller (DLNA  
renderer)  
Press X/x to select [Start Party], then  
press  
.
All party guests’ components start playing  
the same audio content as the party host.  
Note  
To join in a party  
• If [Renderer Options] (page 57) is not displayed on  
the TV screen, this function may be available via a  
future update. However, the function may not be  
available in some regions/countries.  
(for a party guest only)  
You can use the system to play the content that  
is playing on other components.  
1
Turn on the system and other Sony  
components compatible with the  
PARTY STREAMING function.  
The system is compatible with the DLNA  
renderer (network controlled player) function.  
You can operate the system with a DLNA  
controller.  
For details of operation, see the operating  
instructions of the DLNA controller.  
Make sure that each component is  
connected to the network.  
2
Start a party on another networked  
component.  
Note  
• Do not operate the system with the supplied remote  
when operating the system by the DLNA controller.  
3
4
Press C/c to select  
[Music].  
Press X/x to select  
[Party], then  
Tip  
press  
Press X/x to select the party host that  
you set up in Step 2, then press  
.
• The system is compatible with the “Play To” function  
®
5
of Windows Media Player 12 that comes standard  
.
with Windows 7.  
To close a party  
For the party host  
Press x, then press HOME.  
For a party guest  
Press OPTIONS, press X/x to select [Close  
Party], then press  
in Step 3 above.  
To leave from a party  
(for a party guest only)  
Press OPTIONS, press X/x to select [Leave  
Party], then press  
.
Note  
• The sale and product lineup of products that are  
compatible with the PARTY STREAMING function  
differ depending on the area.  
GB  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[Video] only  
Available Options  
Various settings and playback operations are  
available by pressing OPTIONS. The available  
items differ depending on the situation.  
Items  
Details  
[3D Output Setting] Sets whether or not to output  
3D video automatically.  
[Video Settings]  
• [Picture Quality Mode]:  
Selects the picture settings  
for different lighting  
environments.  
Common options  
• [FNR]: Reduces the random  
noise appearing in the  
picture.  
Items  
Details  
[Playback History]  
Displays titles/tracks in the  
playback history of a BD-  
ROM/DVD-ROM/CD-DA  
(music CD) by using  
• [BNR]: Reduces the  
mosaic-like block noise in  
the picture.  
Gracenote technology.  
• [MNR]: Reduces minor  
noise around the picture  
outlines (mosquito noise).  
[Search History]  
[Search Contents]  
Searches for related  
information based on  
keywords from Gracenote via  
the Information Display.  
[Play/Pause]  
[Top Menu]  
Starts or pauses playback.  
Displays the BD’s or DVD’s  
Top Menu.  
Searches for BRAVIA  
Internet Video content based  
on keywords from Gracenote  
via the Information Display.  
[Menu/Popup Menu] Displays the BD-ROM’s  
Pop-up Menu or DVD’s  
menu.  
[Repeat Setting]  
[Favourites List]  
[Play/Stop]  
Sets the repeat play.  
[Title Search]  
Searches for a title on BD-  
ROMs/DVD VIDEOs and  
starts playback from the  
beginning.  
Displays the Favorites List.  
Starts or stops playback.  
[Play from start]  
Plays the item from the  
beginning.  
[Chapter Search]  
[Angle]  
Searches for a chapter and  
starts playback from the  
beginning.  
[Information Display] Displays information on the  
BD-ROM/DVD-ROM/CD-  
DA (music CD) by using  
Gracenote technology.  
Switches to other viewing  
angles when multi-angles are  
recorded on BD-ROMs/DVD  
VIDEOs.  
[Add to Favourites]  
Adds an Internet content to  
the Favorites List.  
[Remove from  
Favourites]  
Erases an Internet content  
from the Favorites List.  
[Music] only  
Items  
Details  
[Add Slideshow  
BGM]  
Registers music files in the  
USB memory as slideshow  
background music.  
GB  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
[Photo] only  
Adjusting the delay between  
the picture and sound  
(A/V SYNC)  
Items  
Details  
[Slideshow]  
Starts a slideshow.  
Changes the slideshow speed.  
[Slideshow Speed]  
[Slideshow Effect]  
Sets the effect when playing a  
slideshow.  
When the sound does not match the pictures on  
the TV screen, you can adjust the delay between  
the picture and sound.  
[Slideshow BGM]  
• [Off]: Turns off the  
function.  
• [My Music from USB]: Sets  
the music files registered in  
[Add Slideshow BGM]. If  
no music file is registered,  
[(Not registered)] is  
displayed.  
1
2
Press SYSTEM MENU.  
Press X/x repeatedly until “A/V SYNC”  
appears in the front panel display, then  
press  
or c.  
3
Press X/x to adjust the delay between  
the picture and sound.  
• [Play from disc]: Sets the  
tracks on CD-DAs (music  
CDs).  
You can adjust from 0 ms to 300 ms in 25  
ms increments.  
[Rotate Left]  
Rotates the photo  
counterclockwise by  
90 degrees.  
4
Press  
.
The setting is made.  
[Rotate Right]  
[View Image]  
Rotates the photo clockwise  
by 90 degrees.  
5
Press SYSTEM MENU.  
Displays the selected picture.  
The system menu turns off.  
Note  
• Depending on the input stream, A/V SYNC may not  
be effective.  
GB  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Note  
• Depending on the disc or source, when you select  
“AUTO,” the beginning of the sound may be cut off  
as the system selects the optimum mode  
automatically. To avoid cutting the sound, select  
other than “AUTO.”  
Sound Adjustment  
Selecting the Effect to  
Suit the Source  
You can select a suitable sound mode for movies  
or music.  
• Depending on the input stream, the sound mode may  
not be effective.  
• When you play a Super Audio CD, this function does  
not work.  
1
4
7
2
5
8
0
3
6
9
Selecting the Audio  
Format, Multilingual  
Tracks, or Channel  
When the system is playing a BD/DVD VIDEO  
or DATA CD/DATA DVD (DivX video files)  
recorded in multiple audio formats (PCM,  
Dolby Digital, MPEG audio, or DTS) or  
multilingual tracks, you can change the audio  
format or language.  
SOUND  
MODE  
Press SOUND MODE repeatedly during  
playback until the desired mode appears in  
the front panel display.  
With a CD, you can select the sound from the  
right or left channel and listen to the sound of the  
selected channel through both the right and left  
speakers.  
• “AUTO”: The system selects “MOVIE” or  
“MUSIC” automatically to produce the sound  
effect depending on the disc or sound stream.  
• “MOVIE”: The system provides the sound for  
movies.  
1
4
7
2
5
8
0
3
6
9
• “MUSIC”: The system provides the sound for  
music.  
• “SPORTS”: The system adds reverberation for  
sports programs.  
• “NEWS”: The system provides the sound for  
voice programs, such as news.  
• “GAME ROCK”: The system provides the  
sound for music/rhythm games.  
Press  
repeatedly during playback to  
select the desired audio signal.  
The audio information appears on the TV  
screen.  
GB  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
x BD/DVD VIDEO  
Depending on the BD/DVD VIDEO, the choice  
of language varies.  
Enjoying Multiplex  
Broadcast Sound  
(DUAL MONO)  
You can enjoy multiplex broadcast sound when  
the system receives or plays a Dolby Digital  
multiplex broadcast signal.  
When 4 digits are displayed, they indicate a  
(page 71) to confirm which language the code  
represents. When the same language is  
displayed two or more times, the BD/DVD  
VIDEO is recorded in multiple audio formats.  
x DVD-VR  
Note  
The types of sound tracks recorded on a disc are  
displayed.  
Example:  
• To receive the Dolby Digital signal, you need to  
connect a TV or other component to the unit with a  
digital optical cord (pages 24, 25). If your TV is  
compatible with the Audio Return Channel function  
(page 47), you can receive a Dolby Digital signal via  
an HDMI cable.  
• [ Stereo]  
• [ Stereo (Audio1)]  
• [ Stereo (Audio2)]  
• [ Main]  
• [ Sub]  
1
4
7
2
5
8
0
3
6
9
• [ Main/Sub]  
Note  
• [ Stereo (Audio1)] and [ Stereo (Audio2)] do not  
appear when only one audio stream is recorded on the  
disc.  
x DATA CD (DivX video file)/DATA DVD  
(DivX video file)  
The choice of DATA CD or DATA DVD audio  
signal formats differs, depending on the DivX  
video file contained on the disc. The format  
appears on the TV screen.  
Press  
repeatedly until the desired  
x CD  
signal appears in the front panel display.  
• [ Stereo]: The standard stereo sound.  
• [ 1/L]: The sound of the left channel  
(monaural).  
• “MAIN”: Sound of the main language will be  
output.  
• “SUB”: Sound of the sub language will be  
output.  
• “MAIN/SUB”: Mixed sound of both the main  
and sub languages will be output.  
• [ 2/R]: The sound of the right channel  
(monaural).  
GB  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Manual tuning  
Press TUNING +/– repeatedly.  
Tuner  
3
Adjust the volume by pressing 2 +/–.  
Listening to the Radio  
You can enjoy radio sound with the system’s  
If an FM program is noisy  
If an FM program is noisy, you can select  
monaural reception. There will be no stereo  
effect, but reception will improve.  
speakers.  
1
2
Press SYSTEM MENU.  
"/1  
1
4
7
2
5
8
0
3
6
9
Press X/x repeatedly until “FM MODE”  
appears in the front panel display.  
Number  
buttons  
SYSTEM  
MENU  
D.TUNING  
TUNED  
STEREO  
C/X/x/c,  
3
4
Press  
or c.  
HOME  
Press X/x to select “MONO.”  
PRESET +/–  
FUNCTION  
• “STEREO”: Stereo reception.  
• “MONO”: Monaural reception.  
“MONO” appears in the front panel  
display.  
TUNING +/–  
x
2 +/–  
5
Press SYSTEM MENU.  
Current station  
Current band and preset number  
The system menu turns off.  
To turn off the radio  
FM  
7
Press "/1.  
88.00 MHz  
SONY FM  
Presetting radio stations  
You can preset up to 20 stations. Before tuning,  
make sure to turn down the volume to minimum.  
Station name (European models  
only)  
1
Press FUNCTION repeatedly until  
“TUNER FM” appears in the front panel  
display.  
1
2
Press FUNCTION repeatedly until  
“TUNER FM” appears in the front panel  
display.  
2
Press and hold TUNING +/– until the  
auto scanning starts.  
Select the radio station.  
Scanning stops when the system tunes in a  
station.  
Automatic tuning  
3
4
Press SYSTEM MENU.  
Press and hold TUNING +/– until the auto  
scanning starts.  
[Auto Tuning] appears on the TV screen.  
Scanning stops when the system tunes in a  
station.  
Press X/x repeatedly until “MEMORY”  
appears in the front panel display, then  
press  
or c.  
A preset number appears in the front panel  
display.  
To stop the automatic tuning manually,  
press TUNING +/– or x.  
TUNED  
STEREO  
GB  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
5
6
Press X/x to select the preset number  
you want.  
2
3
Press D.TUNING.  
Press the number buttons to select the  
frequencies.  
TUNED  
STEREO  
4
Press  
.
Tip  
• You can select the preset number directly by  
pressing the number buttons.  
Press  
.
Using the Radio Data  
System (RDS)  
“COMPLETE” appears in the front panel  
display, and the station is stored.  
7
8
Repeat Steps 2 to 6 to store other  
stations.  
(European models only)  
Press SYSTEM MENU.  
What is the Radio Data  
System?  
The system menu turns off.  
To change the preset number  
Select the desired preset number by pressing  
PRESET +/–, then perform the procedure from  
Step 3.  
The Radio Data System (RDS) is a broadcasting  
service that allows radio stations to send  
additional information along with the regular  
program signal. This tuner offers convenient  
RDS features, such as station name display.  
The station name appears on the TV screen as  
well.  
Selecting the preset station  
1
Press FUNCTION repeatedly until  
“TUNER FM” appears in the front panel  
display.  
Receiving RDS broadcasts  
The last received station is tuned in.  
Simply select a station from the FM band.  
2
Press PRESET +/– repeatedly to select  
the preset station.  
When you tune in a station that provides RDS  
services, the station name* appears in the front  
panel display.  
* If an RDS broadcast is not received, the station  
name may not appear in the front panel display.  
The preset number and frequency appear on  
the TV screen and front panel display.  
Each time you press the button, the system  
tunes in one preset station.  
Note  
Tip  
• RDS may not work properly if the station you are  
tuned to is not transmitting the RDS signal properly,  
or if the signal strength is weak.  
• You can select the preset station number directly  
by pressing the number buttons.  
• Not all FM stations provide RDS service, nor do they  
provide the same type of services. If you are not  
familiar with the RDS system, check with your local  
radio stations for details on RDS services in your  
area.  
Selecting a radio station by  
inputting a frequency directly  
When you know the frequencies, you can select  
radio stations by inputting the frequencies  
directly.  
Tip  
• While receiving an RDS broadcast and pressing  
DISPLAY, you can change between the station name  
and frequency in the front panel display.  
1
Press FUNCTION repeatedly until  
“TUNER FM” appears in the front panel  
display.  
GB  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
• The Control for HDMI function may not work if you  
connect other than a Sony component, even if the  
component is compatible with the Control for HDMI  
function.  
Other Operations  
Using the Control for  
HDMI Function for  
“BRAVIA” Sync  
This function is available on TVs with the  
“BRAVIA” Sync function.  
By connecting Sony components that are  
compatible with the Control for HDMI function  
with an HDMI cable, operation is simplified as  
below:  
Preparing for the Control for  
HDMI function  
(Control for HDMI - Easy Setting)  
If your TV is compatible with the Control for  
HDMI - Easy Setting function, you can set the  
system’s [Control for HDMI] function  
automatically by setting the TV. For details,  
refer to the operating instructions of the TV.  
– System Power Off (page 46)  
– One-Touch Play (page 46)  
– Theatre Mode (page 46)  
If the TV is not compatible with the Control for  
HDMI - Easy Setting function, set the Control  
for HDMI function of the system and TV  
manually.  
– System Audio Control (page 46)  
– Volume Limit (page 46)  
Note  
• For details on setting the TV, refer to the operating  
instructions of the TV.  
– Audio Return Channel (page 47)  
– Remote Easy Control (page 47)  
– Language Follow (page 47)  
1
2
3
Make sure that the system and the TV  
are connected with an HDMI cable.  
Turn on the TV and press [/1 to turn on  
the system.  
Control for HDMI is a mutual control function  
standard used by CEC (Consumer Electronics  
Control) for HDMI (High-Definition  
Multimedia Interface).  
Set the Control for HDMI function of the  
system and TV.  
The Control for HDMI function for the  
system and TV is simultaneously set to on.  
The Control for HDMI function will not work  
when you connect this system to a component  
which is not compatible with the Control for  
HDMI function.  
To set the [Control for HDMI]  
function of the system to on/off  
manually  
There are convenient buttons on the system’s  
remote for operating the TV, such as  
THEATRE, ONE-TOUCH PLAY, and TV "/1.  
For details, see “Remote control” (page 12) and  
refer to the operating instructions of the TV.  
1
Press HOME.  
The home menu appears on the TV screen.  
2
3
Press C/c to select  
Press X/x to select [System Settings],  
then press  
Press X/x to select [HDMI Settings],  
then press  
[Setup].  
.
ONE-TOUCH TV  
THEATRE  
PLAY  
4
BRAVIA Sync  
.
1
2
3
The [HDMI Settings] display appears.  
Note  
5
Press X/x to select [Control for HDMI],  
• Depending on the connected component, the Control  
for HDMI function may not work. Refer to the  
operating instructions supplied with the component.  
then press  
.
GB  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
6
Press X/x to select the setting, then  
press  
.
Enjoying TV sound from the  
speakers in this system  
• [On]: On.  
• [Off]: Off.  
(System Audio Control)  
You can simplify operation to enjoy TV sound  
via this system.  
To use this function, connect the system and the  
TV with an audio cord and an HDMI cable  
(page 23, 24).  
Turning the system off in sync  
with the TV  
(System Power Off)  
When you turn the TV off by using the POWER  
button on the TV’s remote or TV "/1 on the  
system’s remote, the system turns off  
automatically.  
You can use the System Audio Control function  
as follows:  
• When the system is turned on, TV sound can  
be output from the speakers of the system.  
• When TV sound is output from the speakers of  
the system, you can change the output method  
to the speakers of the TV via the TV menu.  
• When TV sound is output from the speakers of  
the system, you can adjust the volume and turn  
off the sound of the system using the TV  
remote.  
Note  
• This function depends on the settings of your TV. For  
details, refer to the operating instructions of the TV.  
Watching BD/DVD by a single  
button press  
(One-Touch Play)  
Note  
• While the TV is in PAP (picture and picture) mode,  
the System Audio Control function will not work.  
• Depending on the TV, when you adjust the unit's  
volume, the volume level appears on the TV screen.  
In this case, the volume level that appears on the TV  
screen and the unit's front panel display may differ.  
Press ONE-TOUCH PLAY.  
The system and your TV turn on, your TV's  
input is set to the HDMI input to which the  
system is connected, and the system starts  
playing a disc automatically.  
The System Audio Control function is also  
activated automatically.  
Setting the Maximum Volume  
Level of the System  
Also, when you insert a disc, One-Touch Play is  
enabled. If One-Touch Play does not start (in the  
case of inserting a disc that is not compatible  
with the auto playback function), press  
FUNCTION repeatedly to select “BD/DVD”  
and press N or ONE-TOUCH PLAY.  
(Volume Limit)  
When the System Audio Control function is  
activated, loud sound may be output depending  
on the volume level of the system. You can  
prevent this by limiting the maximum level of  
the volume. For details, see [Volume Limit]  
Using the Theatre Mode  
(Theatre Mode)  
Press THEATRE.  
If your TV is compatible with the Theatre Mode,  
you can enjoy optimal image and sound quality  
suited for movies, and the System Audio Control  
function is activated automatically.  
GB  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Receiving the digital audio  
signal of the TV  
Setting the Speakers  
[Speaker Settings]  
(Audio Return Channel)  
To obtain the best possible surround sound, set  
connection of the speakers and their distance  
from your listening position. Then use the test  
tone to adjust the level and the balance of the  
speakers to the same level.  
The system can receive the digital audio signal  
of the TV via an HDMI cable when your TV is  
compatible with the Audio Return Channel  
function. You can enjoy TV sound via the  
system by using just one HDMI cable. For  
details, see [Audio Return Channel] (page 55).  
1
Press HOME.  
The home menu appears on the TV screen.  
2
3
Press C/c to select  
Press X/x to select [Audio Settings],  
then press  
Press X/x to select [Speaker Settings],  
then press  
[Setup].  
Operating the system via the  
TV remote  
.
4
(Remote Easy Control)  
.
You can control the basic functions of the  
system via the TV remote when the system’s  
video output is displayed on the TV screen. For  
details, refer to the operating instructions of the  
TV.  
The [Speaker Settings] display appears.  
5
Press X/x to select the item, then press  
.
Check the following settings.  
x [Distance]  
Changing the language for the  
on-screen display of the TV  
When you move the speakers, be sure to set the  
parameters of the distance (A) from the  
listening position to the speakers.  
You can set the parameters from 0.0 to 7.0  
meters.  
(Language Follow)  
When you change the language for the on-screen  
display of the TV, the system’s on-screen  
display language is also changed after turning  
the system off and on.  
The speakers in the illustration correspond to the  
following:  
1Front left speaker (L)  
2Front right speaker (R)  
3Subwoofer  
3
1
2
A
[Front Left/Right] 3.0 m: Set the front speaker  
distance.  
[Subwoofer] 3.0 m: Set the subwoofer distance.  
GB  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Note  
Tip  
• Depending on the input stream, [Distance] may not  
be effective.  
• To adjust the volume of all the speakers at one time,  
press 2 +/–.  
x [Level]  
You can adjust the sound level of the speakers.  
You can set the parameters from –6.0 dB to +6.0  
dB. Be sure to set [Test Tone] to [On] for easy  
adjustment.  
Using the Sleep Timer  
You can set the system to turn off at a preset  
time, so you can fall asleep listening to music.  
The time can be preset in intervals of 10  
minutes.  
[Front Left/Right] 0.0 dB: Set the front speaker  
level.  
[Subwoofer] 0.0 dB: Set the subwoofer level.  
Press SLEEP.  
Each time you press SLEEP, the minutes display  
(the remaining time) changes by 10 minutes.  
When you set the sleep timer, “SLEEP” flashes  
in the front panel display.  
x [Test Tone]  
The speakers will emit a test tone to adjust  
[Level].  
To check the remaining time  
[Off]: The test tone is not emitted from the  
speakers.  
Press SLEEP once.  
[On]: The test tone is emitted from each speaker  
in sequence while adjusting level. When you  
select one of the [Speaker Settings] items, the  
test tone is emitted from each speaker in  
sequence.  
To change the remaining time  
Press SLEEP repeatedly to select the desired  
time.  
Adjust the sound level as follows.  
1
2
Set [Test Tone] to [On].  
Changing the  
IlluminationLEDLighting  
Type  
Press X/x to select [Level], then press  
.
3
4
Press X/x to select the desired speaker  
type, then press  
.
Press C/c to select the left or right  
speaker, then press X/x to adjust the  
level.  
Selecting when to light up the  
illumination LED  
5
6
7
Press  
.
Repeat Steps 3 to 5.  
(Illumination Mode)  
You can select to have the illumination LED  
light up either perpetually or only at certain  
times.  
Press RETURN.  
The system returns to the previous display.  
8
Press X/x to select [Test Tone], then  
1
2
Press SYSTEM MENU.  
press  
.
Press X/x repeatedly until “ILLUM  
MODE” appears in the front panel  
9
Press X/x to select [Off], then press  
.
display, then press  
or c.  
Note  
• The test tone signals are not output from the HDMI  
OUT jack.  
GB  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
3
Press X/x to select a setting.  
Setting the illumination  
demonstration to on/off  
For BDV-F700  
• “ALL SYNC”: moves the illumination to  
match all the audio.  
• “MUSIC SYNC”: moves the illumination  
to match the music or the radio only.  
• “SIMPLE 1”: turns on the illumination  
when you load or eject a disc. The  
illumination does not move to match the  
audio.  
(Illumination Demo)  
(BDV-F700 only)  
You can select whether or not to activate the  
illumination demonstration while the system is  
in standby mode. When this function is  
activated, the illumination demonstration can be  
started by pressing a button on the unit (except  
for "/1).  
• “SIMPLE 2”: turns on the illumination  
when you press a button.  
For BDV-F500  
• “STANDARD”: turns on the illumination  
at all times.  
1
2
Press SYSTEM MENU.  
Press X/x repeatedly until “ILLUM  
MODE” appears in the front panel  
display, then press  
• “SIMPLE”: turns on the illumination for  
about 10 seconds when you press a button.  
or c.  
3
4
Press X/x to select a setting.  
• “DEMO ON”: On.  
4
Press  
.
The setting is made.  
• “DEMO OFF”: Off.  
Press  
.
Selecting the illumination type  
for playing music  
The setting is made.  
(Flow Light)  
(BDV-F700 only)  
Deactivating the Buttons  
on the Unit  
When “ALL SYNC” or “MUSIC SYNC” is  
selected in “ILLUM MODE,” you can select  
how to move the illumination.  
(Child Lock)  
1
2
Press SYSTEM MENU.  
You can deactivate the buttons on the unit  
(except for "/1) for preventing misoperation,  
such as child mischief (child lock function).  
Press X/x repeatedly until “FLOW  
LIGHT” appears in the front panel  
display, then press  
or c.  
Press x on the unit for more than 5  
seconds.  
3
Press X/x to select a setting.  
“CHILD LOCK” and “ON” appear in the front  
panel display.  
The child lock function is activated and the  
buttons on the unit are locked. (You can operate  
the system by using the remote.)  
To cancel, press x for more than 5 seconds so  
that “CHILD LOCK” and “OFF” appear in the  
front panel display.  
• “FLUID”: displays slow, elastic  
illumination to match the sound.  
• “SHARP”: displays bright, dazzling  
illumination to match the sound.  
4
Press  
.
The setting is made.  
Note  
• Depending on the music source, the Flow Light  
function may not work.  
Note  
• When you operate the buttons on the unit while the  
child lock function is on, “CHILD LOCK” appears in  
the front panel display.  
GB  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Controlling Your TV with  
the Supplied Remote  
By adjusting the remote signal, you can control  
your TV with the supplied remote.  
Note  
• When you replace the batteries of the remote, the  
code number may reset itself to the default (SONY)  
setting. Reset the appropriate code number.  
Preparing the remote for  
controlling the TV  
Press and hold TV [/1 while entering your  
TV’s manufacturer’s code (see the table)  
using the number buttons. Then release TV  
[/1.  
If the setting is unsuccessful, the currently  
registered code is not changed. Re-enter the  
code number.  
Code numbers of controllable  
TVs  
If more than one code number is listed, try  
entering them one at a time until you find the  
code that works with your TV.  
Manufacturer  
SONY  
Code number  
01 (default)  
02, 08  
05  
SAMSUNG  
LG  
PHILIPS  
02, 03, 07  
06  
PANASONIC  
TOSHIBA  
04  
Saving Power in Standby  
Mode  
Check that the following settings in [System  
Settings] are made:  
– [Control for HDMI] in [HDMI Settings] is set  
to [Off] (page 45).  
– [Quick Start Mode] is set to [Off] (page 55).  
GB  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Icon  
Explanation  
Makes the audio settings  
Settings and Adjustments  
according to the type of  
connecting jacks.  
Using the Setup Display  
You can make various adjustments of items such  
Makes detailed settings for BD/  
as picture and sound.  
DVD playback.  
Select  
(Setup) on the home menu when you  
Makes detailed settings for the  
need to change the settings of the system.  
The default settings are underlined.  
Parental Control function.  
Note  
Makes detailed settings for  
Super Audio CD playback.  
• Playback settings stored in the disc take priority over  
the Setup Display settings and not all the functions  
described may work.  
Makes the system-related  
settings.  
1
2
Press HOME.  
The home menu appears on the TV screen.  
Makes detailed settings for  
Internet and network.  
Press C/c to select  
[Setup].  
Re-runs the Easy Setup to make  
the basic settings.  
Resets the system to the factory  
settings.  
3
Press X/x to select the setup category  
[Network Update]  
You can update and improve the functions of the  
icon to change, then press  
.
Example: [Screen Settings]  
system.  
For information about update functions, refer to  
the following website:  
Setup  
TV Type  
Set the screen aspect ratio of your TV.  
For customers in Europe  
Screen Format  
Original  
DVD Aspect Ratio  
Cinema Conversion Mode  
Letter Box  
Auto  
For customers in Latin America  
You can setup the following options.  
Icon  
Explanation  
Updates the software of the  
system.  
Makes the screen settings  
according to the type of  
connecting jacks.  
GB  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
x [Output Video Format]  
[Screen Settings]  
[HDMI]: Normally select [Auto]. Select  
[Original Resolution] to output the resolution  
recorded on the disc. (When the resolution is  
lower than SD resolution, it is scaled up to SD  
resolution.)  
x [3D Output Setting]  
[Auto]: Normally select this.  
[Off]: Select this to display all contents in 2D.  
[Video]: Automatically sets the lowest  
resolution.  
x [TV Screen Size Setting for 3D]  
Sets the screen size of your 3D compatible TV.  
Note  
• When connecting the HDMI OUT jack and VIDEO  
OUT jack at the same time, select [Video].  
• If no picture appears when setting [HDMI]  
resolution, select [Video].  
x [TV Type]  
[16:9]: Select this when connecting to a wide-  
screen TV or a TV with a wide-mode function.  
[4:3]: Select this when connecting to a 4:3  
screen TV without a wide-mode function.  
x [BD/DVD-ROM 1080/24p Output]  
[Auto]: Outputs 1920 × 1080p/24 Hz video  
signals only when connecting a 1080/24p-  
compatible TV using the HDMI OUT jack.  
[Off]: Select this when your TV is not  
compatible with 1080/24p video signals.  
x [Screen Format]  
[Original]: Select this when connecting to a TV  
with a wide-mode function. Displays a 4:3  
screen picture in 16:9 aspect ratio even on a  
wide-screen TV.  
[Fixed Aspect Ratio]: Changes the picture size  
to fit the screen size with the original picture  
aspect ratio.  
x [YCbCr/RGB (HDMI)]  
[Auto]: Automatically detects the type of  
external device, and switches to the matching  
color setting.  
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video  
signals.  
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video  
signals.  
x [DVD Aspect Ratio]  
[Letter Box]: Displays a wide picture with black  
bands on the top and bottom.  
[RGB]: Select this when connecting to a device  
with an HDCP-compliant DVI jack.  
x [HDMI Deep Colour Output]  
[Auto]: Normally select this.  
[12bit], [10bit]: Outputs 12bit/10bit video  
signals when the connected TV is compatible  
with Deep Colour.  
[Pan & Scan]: Displays a full-height picture on  
the entire screen, with trimmed sides.  
[Off]: Select this when the picture is unstable or  
colors appear unnatural.  
x [Pause Mode] (BD/DVD VIDEO/DVD-R/  
DVD-RW only)  
x [Cinema Conversion Mode]  
[Auto]: Normally select this. The unit  
automatically detects whether the material is  
video-based or film-based, and switches to the  
appropriate conversion method.  
[Video]: The conversion method suited for  
video-based material will always be selected  
regardless of the material.  
[Auto]: The picture, including subjects that  
move dynamically, is output with no jitter.  
Normally select this position.  
[Frame]: The picture, including subjects that do  
not move dynamically, is output in high  
resolution.  
GB  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                 
x [Audio Output]  
[Speaker]: Outputs sound from the system’s  
speakers only.  
[Audio Settings]  
[Speaker + HDMI]: Outputs sound from the  
system’s speakers and 2-channel linear PCM  
signals from the HDMI OUT jack.  
[HDMI]: Outputs sound from the HDMI OUT  
jack only. Sound format depends on the  
connected component.  
x [BD Audio MIX Setting]  
[On]: Outputs the audio obtained by mixing the  
interactive audio and secondary audio to the  
primary audio.  
[Off]: Outputs the primary audio only. Select  
this when outputting HD audio signals to an AV  
receiver.  
Note  
• Even if [HDMI] or [Speaker + HDMI] is selected, the  
sound of functions other than “BD/DVD” or  
“D.MEDIA” is output from the system’s speakers,  
not from the HDMI OUT jack.  
x [DTS Neo:6]  
Simulates multichannel surround sound from 2  
channel sources according to the capability of  
the connected device, and outputs the sound via  
the HDMI OUT jack.  
• When you set [Audio Output] to [HDMI], the  
SOUND MODE and “SUR.SETTING” functions are  
disabled.  
• When the System Audio Control function (page 46)  
is activated, this setting may change automatically.  
[Cinema]: Outputs simulated multichannel  
sound from 2 channel sources using DTS Neo:6  
Cinema mode.  
[Music]: Outputs simulated multichannel sound  
from 2 channel sources using DTS Neo:6 Music  
mode.  
x [Sound Effect]  
You can set the system’s sound effects (SOUND  
MODE and “SUR.SETTING”) to on/off.  
[Off]: Outputs sound with its original number of  
channels.  
[On]: Enables all of the system’s sound effects.  
The upper limit of sampling frequency is set to  
48 kHz.  
[Off]: The sound effects are disabled. Select this  
when you do not want to set the upper limit of  
sampling frequency.  
x [Audio DRC]  
You can compress the dynamic range of the  
sound track.  
[Auto]: Performs playback at the dynamic range  
specified by the disc (BD-ROM only).  
[Off]: No compression of dynamic range.  
[On]: The system reproduces the sound track  
with the kind of dynamic range that the  
recording engineer intended.  
x [Speaker Settings]  
To obtain the best possible surround sound, set  
the speakers. For details, see “Setting the  
x [Attenuate - AUDIO]  
Distortion may occur when you listen to a  
component connected to the AUDIO (IN L/R)  
jacks. You can prevent distortion by reducing  
the input level on the unit.  
[On]: Attenuates the input level. The output  
level is changed.  
[Off]: Normal input level.  
GB  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                     
x [BD Data Storage Options]  
[Internal memory]: Selects the internal memory  
to store BD data.  
[BD/DVD Viewing  
Settings]  
You can make detailed settings for BD/DVD  
playback.  
[USB device (left)]: Selects the  
(USB) port  
on the left side of the unit to store BD data.  
[USB device (right)]: Selects the  
of the side panel on the right of the unit to store  
BD data.  
(USB) port  
x [BD/DVD Menu]  
You can select the default menu language for  
BD-ROMs or DVD VIDEOs.  
When you select [Select Language Code], the  
display for entering the language code appears.  
Enter the code for your language by referring to  
[Parental Control  
Settings]  
x [Password]  
x [Audio]  
Set or change the password for the Parental  
Control function. A password allows you to set  
a restriction on BD-ROM, DVD VIDEO, or  
Internet video playback. If necessary, you can  
differentiate the restriction levels for BD-ROMs  
and DVD VIDEOs.  
You can select the default track language for  
BD-ROMs or DVD VIDEOs.  
When you select [Original], the language given  
priority in the disc is selected.  
When you select [Select Language Code], the  
display for entering the language code appears.  
Enter the code for your language by referring to  
x [Parental Control Area Code]  
Playback of some BD-ROMs or DVD VIDEOs  
can be limited according to the geographic area.  
Scenes may be blocked or replaced with  
different scenes. Follow the on-screen  
x [Subtitle]  
You can select the default subtitle language for  
BD-ROMs or DVD VIDEOs.  
instructions and enter your four-digit password.  
When you select [Select Language Code], the  
display for entering the language code appears.  
Enter the code for your language by referring to  
x [BD Parental Control]  
Playback of some BD-ROMs can be limited  
according to the age of the users. Scenes may be  
blocked or replaced with different scenes.  
Follow the on-screen instructions and enter your  
four-digit password.  
x [BD Hybrid Disc Playback Layer]  
[BD]: Plays BD layer.  
[DVD/CD]: Plays DVD or CD layer.  
x [DVD Parental Control]  
x [BD Internet Connection]  
Playback of some DVD VIDEOs can be limited  
according to a predetermined level such as the  
age of the users. Scenes may be blocked or  
replaced with different scenes. Follow the on-  
screen instructions and enter your four-digit  
password.  
[Allow]: Normally select this.  
[Do not allow]: Prohibits Internet connection.  
GB  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                               
x [Internet Video Parental Control]  
Playback of some Internet videos can be limited  
according to the age of the users. Scenes may be  
blocked or replaced with different scenes.  
Follow the on-screen instructions and enter your  
four-digit password.  
x [HDMI Settings]  
By connecting Sony components that are  
compatible with the Control for HDMI function  
with an HDMI cable, operation is simplified.  
[Control for HDMI]  
You can set the [Control for HDMI] function to  
on/off.  
[On]: On. You can operate mutually between  
components that are connected with an HDMI  
cable.  
x [Internet Video Unrated]  
[Allow]: Allows the playback of unrated  
Internet videos.  
[Block]: Blocks the playback of unrated Internet  
videos.  
[Off]: Off.  
[Audio Return Channel]  
[Music Settings]  
You can make detailed settings for Super Audio  
This function is available when you connect the  
system and TV that is compatible with the Audio  
Return Channel function.  
[Auto]: The system can receive the digital audio  
signal of the TV automatically via an HDMI  
cable.  
CD playback.  
x [Super Audio CD Playback Layer]  
[Super Audio CD]: Plays the Super Audio CD  
layer.  
[Off]: Off.  
Note  
[CD]: Plays the CD layer.  
• This function is available only when [Control for  
HDMI] is set to [On].  
x [Super Audio CD Playback Channels]  
[DSD 2ch]: Plays the 2ch area.  
[DSD Multi]: Plays the multi-channel area.  
[Volume Limit]  
When the System Audio Control function  
(page 46) is activated, loud sound may be output  
depending on the volume level of the system.  
You can prevent this by limiting the maximum  
level of the volume when the System Audio  
Control function activates.  
[Level3]: Maximum volume level is set to 15.  
[Level2]: Maximum volume level is set to 20.  
[Level1]: Maximum volume level is set to 30.  
[Off]: Off.  
[System Settings]  
You can make the system-related settings.  
x [OSD]  
You can select your language for the system on-  
screen displays.  
Note  
• This function is available only when [Control for  
HDMI] is set to [On].  
x [Dimmer]  
[Bright]: Bright lighting.  
[Dark]: Low lighting.  
x [Quick Start Mode]  
[On]: Shortens the startup time from standby  
mode. You can operate the system quickly after  
turning it on.  
[Off]: The default setting.  
GB  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                     
When the registration is enabled  
x [Auto Standby]  
Press C/c to select [OK] or [Cancel], then  
[On]: Turns on the [Auto Standby] function.  
When you do not operate the system for about  
30 minutes, the system enters standby mode  
automatically.  
press  
.
[OK]: The device is deregistered and the  
deregistration code is displayed.  
[Cancel]: The system returns to the previous  
display.  
[Off]: Turns off the function.  
x [Auto Display]  
For more information, go to  
[On]: Automatically displays information on the  
screen when changing the viewing titles, picture  
modes, audio signals, etc.  
[Off]: Displays information only when you  
press DISPLAY.  
x [System Information]  
You can display the system’s software version  
information and the MAC address.  
x [Screen Saver]  
[On]: Turns on the screen saver function.  
[Off]: Off.  
[Network Settings]  
You can make detailed settings for Internet and  
x [Software Update Notification]  
[On]: Sets the system to inform you of newer  
software version information (page 51).  
[Off]: Off.  
network.  
x [Internet Settings]  
Connect the system to the network beforehand.  
x [Gracenote Settings]  
[Auto]: Automatically downloads disc  
information when you stop playback of the disc.  
To download, the system must be connected to  
the network.  
[View Network Status]: Displays the current  
network status.  
[Manual]: Downloads disc information when  
you select [Playback History] or [Information  
Display] in the options menu.  
[Wired Setup]: Select this when you connect to  
a broadband router directly.  
[USB Wireless Setup]: Select this when you use  
a USB Wireless LAN Adapter.  
x [DivX® VOD]  
For more information, go to  
You can display the registration or  
deregistration code for this system, or deregister  
this system after registration.  
For customers in Europe  
When the activation is disabled  
[Registration Code]: The registration code is  
displayed.  
For customers in Latin America  
[Deregistration Code]: The deregistration code  
is displayed. (This item can be selected only  
after the registration code is displayed.)  
x [Network Connection Diagnostics]  
You can run the network diagnostic to check if  
the network connection has been made properly.  
x [Connection Server Settings]  
Sets whether or not to display the connected  
DLNA server.  
GB  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                             
x [Renderer Options]  
[Automatic Access Permission]: Sets whether or  
not to allow automatic access from newly  
detected DLNA controller.  
[Smart Select]: Allows a Sony DLNA controller  
to find the system as the target component to  
operate by using the infrared ray. You can set  
this function to on or off.  
[Renderer Name]: Displays the system’s name  
as it is listed on other DLNA devices on the  
network.  
x [Party Auto Start]  
[On]: Starts a party or joins an existing party at  
the request of a networked device compatible  
with the PARTY STREAMING function.  
[Off]: Off.  
x [BD Remote Device Registration]  
Registers your “BD remote” device.  
x [Registered BD Remote Devices]  
Displays a list of your registered “BD remote”  
devices.  
[Easy Setup]  
Re-runs the Easy Setup to make the basic  
settings. Follow the on-screen instructions.  
[Resetting]  
x [Reset to Factory Default Settings]  
You can reset the system settings to the factory  
default by selecting the group of settings. All the  
settings within the group will be reset.  
x [Initialize Personal Information]  
You can erase your personal information stored  
in the system.  
GB  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                         
On operation  
• If the system is brought directly from a cold to a warm  
location, or is placed in a very damp room, moisture  
may condense on the lenses inside the unit. Should  
this occur, the system may not operate properly. In  
this case, remove the disc and leave the system turned  
on for about half an hour until the moisture  
evaporates.  
Additional Information  
Precautions  
On safety  
• To prevent fire or shock hazard, do not place objects  
filled with liquids, such as vases, on the system, or  
place the system near water, such as near a bathtub or  
shower room. Should any solid object or liquid fall  
into the cabinet, unplug the system and have it  
checked by qualified personnel before operating it  
any further.  
• When you move the system, take out any disc. If you  
do not, the disc may be damaged.  
• If anything falls into the cabinet, unplug the unit and  
have it checked by qualified personnel before  
operating it any further.  
On adjusting volume  
• Do not touch the AC power cord (mains lead) with  
wet hands. Doing so may cause an electric shock.  
• Do not turn up the volume while listening to a section  
with very low level inputs or no audio signals. If you  
do, the speakers may be damaged when a peak level  
section is suddenly played.  
On power sources  
• Unplug the unit from the wall outlet (mains) if you do  
not intend to use it for an extended period of time. To  
disconnect the cord, pull it out by the plug, never by  
the cord.  
On cleaning  
• Clean the cabinet, panel, and controls with a soft cloth  
slightly moistened with a mild detergent solution. Do  
not use any type of abrasive pad, scouring powder or  
solvent such as alcohol or benzine.  
On placement  
• Place the system in a location with adequate  
ventilation to prevent heat build-up in the system.  
• At high volume, over long periods of time, the cabinet  
becomes hot to the touch. This is not a malfunction.  
However, touching the cabinet should be avoided. Do  
not place the system in a confined space where  
ventilation is poor as this may cause overheating.  
• Do not block the ventilation slots by putting anything  
on the system. The system is equipped with a high  
power amplifier. If the ventilation slots are blocked,  
the system can overheat and malfunction.  
• Do not place the system on surfaces (rugs, blankets,  
etc.) or near materials (curtains, draperies) that may  
block the ventilation slots.  
If you have any questions or problems concerning  
your system, please consult your nearest Sony dealer.  
On cleaning discs, disc/lens  
cleaners  
• Do not use cleaning discs or disc/lens cleaners  
(including wet or spray types). These may cause  
the apparatus to malfunction.  
On replacement of parts  
• In the events that this system is repaired, repaired  
parts may be collected for reuse or recycling  
purposes.  
• Do not install the system in a confined space, such as  
a bookshelf or similar unit.  
On your TV’s color  
• If the speakers should cause the TV screen to have  
color irregularity, turn off the TV then turn it on after  
15 to 30 minutes. If color irregularity should persist,  
place the speakers further away from the TV set.  
• Do not install the system near heat sources such as  
radiators, air ducts, or in a place subject to direct  
sunlight, excessive dust, mechanical vibration, or  
shock.  
• Do not install the system on its face or back. It is  
designed to be operated in a vertical position only.  
• Keep the system and discs away from components  
with strong magnets, such as microwave ovens, or  
large loudspeakers.  
IMPORTANT NOTICE  
Caution: This system is capable of holding a still  
video image or on-screen display image on your  
television screen indefinitely. If you leave the still  
video image or on-screen display image displayed  
on your TV for an extended period of time you risk  
permanent damage to your television screen.  
Projection televisions are especially susceptible to  
this.  
• Do not place heavy objects on the system.  
GB  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
On moving the system  
• Before moving the system, make sure that there is no  
disc inserted, and remove the AC power cord (mains  
lead) from the wall outlet (mains).  
Notes about the Discs  
On handling discs  
• To keep the disc clean, handle the disc by its  
edge. Do not touch the surface.  
• Do not stick paper or tape on the disc.  
• Do not expose the disc to direct sunlight or  
heat sources such as hot air ducts, or leave it in  
a car parked in direct sunlight as the  
temperature may rise considerably inside the  
car.  
• After playing, store the disc in its case.  
On cleaning  
• Before playing, clean the disc with a cleaning  
cloth.  
Wipe the disc from the center out.  
• Do not use solvents such as benzine, thinner,  
commercially available cleaners, or anti-static  
spray intended for vinyl LPs.  
This system can only play a standard circular  
disc. Using neither standard nor circular discs  
(e.g., card, heart, or star shape) may cause a  
malfunction.  
Do not use a disc that has a commercially  
available accessory attached, such as a label or  
ring.  
Do not use a lens cleaning disc.  
GB  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
If you experience any of the following difficulties while using the system, use this troubleshooting  
guide to help remedy the problem before requesting repairs. Should any problem persist, consult your  
nearest Sony dealer.  
Note that if service personnel changes some parts during repair, these parts may be retained.  
Power  
Symptom  
Problems and solutions  
The power is not turned on.  
“PROTECTOR” and “PUSH  
• Check that the AC power cord (mains lead) is connected securely.  
Press "/1 to turn off the system, and check the following items after  
POWER” appear alternately in “STANDBY” disappears.  
the front panel display.  
• Are the + and – speaker cords short-circuited?  
• Are you using only the specified speakers?  
• Is anything blocking the ventilation holes of the system?  
• After checking the above items and fixing any problems, turn on the system. If  
the cause of the problem cannot be found even after checking all the above  
items, consult your nearest Sony dealer.  
General  
Symptom  
Problems and solutions  
The remote does not function.  
• The distance between the remote and the unit is too far.  
• The batteries in the remote are weak.  
• When you cannot perform menu operations via the front panel display, press  
HOME on the remote.  
The system does not work  
normally.  
• Disconnect the AC power cord (mains lead) from the wall outlet (mains), then  
reconnect after several minutes.  
Picture  
Symptom  
Problems and solutions  
There is no picture.  
• Check the video connection (page 23).  
• The unit is not connected to the correct TV input jack (page 23).  
• The video input on the TV is not set so that you can view pictures from the  
system.  
• Check the output method on your system (page 23).  
• The unit is connected to an input device that is not HDCP (High-bandwidth  
Digital Content Protection) compliant (“HDMI” on the front panel does not  
light up) (page 23).  
• When playing a double-layer DVD, the video and audio may be momentarily  
interrupted at the point where the layers switch.  
No picture appears when the  
• Press and hold N and VOL – on the unit for more than 5 seconds to reset the  
video output resolution selected video output resolution to the lowest resolution.  
in [Output Video Format] is  
incorrect.  
GB  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Symptom  
Problems and solutions  
Video signals are only output  
from the HDMI OUT jack when  
connecting the HDMI OUT jack  
and VIDEO OUT jack at the  
same time.  
• Set [Output Video Format] in [Screen Settings] to [Video] (page 52).  
The dark area of the picture is too • Set [Picture Quality Mode] to [Standard] (default) (page 39).  
dark/the bright area is too bright  
or unnatural.  
The picture is not output  
correctly.  
• Check the [Output Video Format] settings in [Screen Settings] (page 52).  
• If the analog and digital signals are output at the same time, set [BD/DVD-  
ROM 1080/24p Output] in [Screen Settings] to [Off] (page 52).  
• For BD-ROMs, check the [BD/DVD-ROM 1080/24p Output] settings in  
[Screen Settings] (page 52).  
Picture noise appears.  
• The disc is dirty or flawed.  
• If the picture output from your system goes through your VCR to get to your  
TV, the copy-protection signal applied to some BD/DVD programs could affect  
picture quality. If you still experience problems even when you connect your  
unit directly to your TV, try connecting your unit to the other input jacks.  
Even though you set the aspect • The aspect ratio on the disc is fixed.  
ratio in [TV Type] of [Screen  
Settings], the picture does not fill  
the TV screen.  
Color irregularity occurs on the • If the speakers are used with a CRT-based TV or projector, install the speakers  
TV screen.  
at least 0.3 meters from the TV set.  
• If the color irregularity persists, turn off the TV set once, then turn it on after 15  
to 30 minutes.  
• Make sure that no magnetic object (magnetic latch on a TV stand, health care  
device, toy, etc.) is placed near the speakers.  
Sound  
Symptom  
Problems and solutions  
There is no sound.  
• The speaker cord is not connected securely.  
• Check the speaker settings (page 47).  
• Fast forward or fast reverse is performed. Press N to return to normal play  
mode.  
• Slow forward or freeze frame is performed. Press N to return to normal play  
mode.  
No sound is output from the  
HDMI OUT jack.  
• Set [Audio Output] to [HDMI] (page 53).  
The left and right sounds are  
unbalanced or reversed.  
• Check that the speakers and components are connected correctly and securely.  
• Check the speaker connections and settings (pages 20, 47).  
There is no sound from the  
subwoofer.  
GB  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Problems and solutions  
There is no digital sound from  
• Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On]  
the HDMI OUT jack when using (page 55). Also, set [Audio Return Channel] in [HDMI Settings] of [System  
the Audio Return Channel  
function.  
Settings] to [Auto] (page 55).  
• Make sure that your TV is compatible with the Audio Return Channel function.  
• Make sure that an HDMI cable is connected to a jack on your TV that is  
compatible with the Audio Return Channel function.  
• The sampling frequency of the input stream is more than 48 kHz.  
The system does not output  
• Set [Audio Return Channel] in [HDMI Settings] of [System Settings] to [Off]  
sound correctly when connected (page 47).  
to a set-top box.  
Severe hum or noise is heard.  
• Check that the connecting cords are away from a transformer or motor, and at  
least 3 meters away from your TV set or a fluorescent light.  
• Move your TV away from the audio components.  
• Clean the disc.  
The sound loses stereo effect  
when you play a CD.  
• Select stereo sound by pressing  
The surround effect is difficult to • Check the surround setting (page 32).  
hear when you are playing a  
sound track of Dolby Digital,  
DTS, or MPEG audio.  
• Check the speaker connections and settings (pages 20, 47).  
• Depending on the BD/DVD, the output signal may not be the entire 5.1 channel.  
It may be monaural or stereo even if the sound track is recorded in Dolby  
Digital or MPEG audio format.  
The beginning of the sound is cut • Set the sound mode to “MOVIE” or “MUSIC” (page 41).  
off.  
• Select “AUTO” for “SUR.SETTING” (page 32).  
The sound effects are disabled. • The effects of SOUND MODE and “SUR.SETTING” may be disabled  
depending on the input stream (page 53).  
Distortion occurs in the sound of • Reduce the input level for the connected component by setting [Attenuate -  
a connected component.  
Operation  
Symptom  
Problems and solutions  
Radio stations cannot be tuned • Check that the antenna (aerial) is connected securely. Adjust the antenna  
in.  
(aerial) or connect an external antenna (aerial) if necessary.  
• The signal strength of the stations is too weak (when tuning in with automatic  
tuning). Use direct tuning.  
The disc does not play.  
• You are attempting to play a disc with a format that cannot be played by this  
system (page 66).  
• The region code on the BD/DVD does not match the system.  
• Moisture has condensed inside the unit and may cause damage to the lenses.  
Remove the disc and leave the unit turned on for about half an hour.  
• The system cannot play a recorded disc that is not correctly finalized (page 66).  
File names are not displayed  
correctly.  
• The system can only display ISO 8859-1-compliant character formats. Other  
character formats may be displayed differently.  
• Depending on the writing software used, the input characters may be displayed  
differently.  
A disc does not start playing  
from the beginning.  
• Resume play has been selected. Press OPTIONS and select [Play from start],  
then press  
.
• The title or BD/DVD menu automatically appears on the TV screen.  
GB  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Problems and solutions  
Playback does not start from the • The resume point may be cleared from memory depending on the disc when  
resume point where you last  
stopped playing.  
– you eject the disc.  
– you disconnect the USB device.  
– you play other content.  
– you turn off the unit.  
The system starts playing the  
disc automatically.  
• The BD/DVD features an auto playback function.  
Playback stops automatically.  
• Some discs may contain an auto pause signal. While playing such a disc, the  
system stops playback at the auto pause signal.  
You cannot perform some  
• Depending on the disc, you may not be able to perform some of the operations.  
functions such as stop or search. Refer to the operating instructions supplied with the disc.  
Messages do not appear on the • In the Setup Display, select the desired language for the on-screen display in  
TV screen in the language you  
want.  
The language for the soundtrack/ • Try using the BD’s or DVD’s menu.  
subtitle or angles cannot be  
changed.  
• Multi-lingual tracks/subtitles or multi-angles are not recorded on the BD or  
DVD being played.  
• The BD or DVD prohibits the changing of the language for the sound track/  
subtitle or angles.  
The disc does not eject and you • Try the following: 1 Press and hold N and Z on the unit for more than 5  
cannot remove the disc even  
after you press Z.  
seconds to eject the disc. 2 Remove the disc. 3 Disconnect the AC power  
cord (mains lead) from the wall outlet (mains), then reconnect after several  
minutes.  
A disc cannot be ejected and  
“LOCKED” appears in the front  
panel display.  
• Contact your Sony dealer or local authorized Sony service facility.  
The Control for HDMI function • Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On]  
does not work.  
• Make sure that the connected component is compatible with the [Control for  
HDMI] function.  
• Check the connected component’s setting for the Control for HDMI function.  
Refer to the operating instructions supplied with the component.  
• If you change the HDMI connection, connect and disconnect the AC power  
cord (mains lead), or have a power failure, set [Control for HDMI] in [HDMI  
Settings] of [System Settings] to [Off], then set [Control for HDMI] to [On]  
No sound is output from the  
system and TV while using the  
System Audio Control function.  
• Make sure that the connected TV is compatible with the System Audio Control  
function.  
Bonus contents or other data that • Try the following: 1 Remove the disc. 2 Turn the system off. 3 Remove and  
are contained in a BD-ROM  
cannot be played.  
reconnect the USB device (page 35). 4 Turn the system on. 5 Insert the BD-  
ROM with BONUSVIEW/BD-LIVE.  
The unit does not work and  
“CHILD LOCK” appears in the  
front panel display when you  
press any button on the unit.  
• Set the child lock function to off (page 49).  
The system menu does not work. • Press HOME on the remote.  
GB  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USB device  
Symptom  
Problems and solutions  
The USB device is not  
recognized.  
• Try the following: 1 Turn the system off. 2 Remove and reconnect the USB  
device. 3 Turn the system on.  
• Make sure that the USB device is securely connected to the  
• Check if the USB device or a cable is damaged.  
• Check if the USB device is on.  
(USB) port.  
• If the USB device is connected via a USB hub, disconnect it and connect the  
USB device directly to the unit.  
BRAVIA Internet Video  
Symptom  
Problems and solutions  
The picture/sound is poor/certain • Picture/sound quality may be poor depending on Internet content providers.  
programs display with a loss of  
detail, especially during fast-  
motion or dark scenes.  
• Picture/sound quality may be improved by changing the connection speed.  
Sony recommends a connection speed of at least 2.5 Mbps for standard-  
definition video and 10 Mbps for high-definition video.  
• Not all videos contain sound.  
The picture is small.  
• Press X to zoom in.  
Network connection  
Symptom  
Problems and solutions  
The player cannot connect to the • Check the network connection (page 27) and the network settings (page 56).  
network.  
You cannot connect your PC to • The wireless settings of the router may change automatically if you use the Wi-  
the Internet after [Wi-Fi  
Protected Setup (WPS)] is  
performed.  
Fi Protected Setup function before adjusting the settings of the router. In this  
case, change the wireless settings of your PC accordingly.  
You cannot connect the system • Check if the wireless LAN router is on.  
to your wireless LAN router.  
• Depending on the usage environment, including the wall material, radio wave  
reception conditions, or obstacles between the system and the wireless LAN  
router, the possible communication distance may be shortened. Move the  
system and the wireless LAN router closer to each other.  
• Devices that use a 2.4 GHz frequency band, such as a microwave, Bluetooth, or  
digital cordless device, may interrupt the communication. Move the unit away  
from such devices, or turn off such devices.  
The desired wireless router is not • Press RETURN to return to the previous screen, and try [Scan] again. If the  
detected even if [Scan] is  
performed.  
desired wireless router is still not detected, press RETURN to select [Manual  
registration].  
The message [A new software  
version has been found on the  
network. Perform update under  
“Network Update.”] appears on  
the screen when turning the  
system on.  
• See [Network Update] (page 51) to update the system to a newer software  
version.  
Other  
Symptom  
Problems and solutions  
“Exxxx” appears in the front  
panel display.  
• Contact your nearest Sony dealer or local authorized Sony service facility and  
give the error code.  
GB  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
appears without any  
messages on the entire screen.  
Problems and solutions  
• Contact your nearest Sony dealer or local authorized Sony service facility.  
GB  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note on playback operations of a  
BD/DVD  
Some playback operations of a BD/DVD may be  
intentionally set by software producers. Since  
this system plays a BD/DVD according to the  
disc contents the software producers designed,  
some playback features may not be available.  
Playable Discs  
1)  
Blu-ray Disc  
BD-ROM  
2)  
BD-R/BD-RE  
DVD-ROM  
3)  
DVD  
DVD-R/DVD-RW  
DVD+R/DVD+RW  
Note about double-layer BDs/  
DVDs  
The playback picture and sound may be  
3)  
CD  
CD-DA (Music CD)  
CD-ROM  
momentarily interrupted when the layers switch.  
CD-R/CD-RW  
Super Audio CD  
Region code (BD-ROM/DVD  
VIDEO only)  
1)Since the Blu-ray Disc specifications are new and  
evolving, some discs may not be playable depending  
on the disc type and the version. Also, the audio  
output differs depending on the source, connected  
output jack, and selected audio settings.  
2)BD-RE: Ver.2.1  
Your system has a region code printed on the  
rear of the unit and will only play a BD-ROM/  
DVD VIDEO (playback only) labeled with  
ALL  
identical region codes or  
.
BD-R: Ver.1.1, 1.2, 1.3 including organic pigment  
type BD-R (LTH type)  
BD-Rs recorded on a PC cannot be played if  
postscripts are recordable.  
3)A CD or DVD disc will not play if it has not been  
correctly finalized. For more information, refer to the  
operating instructions supplied with the recording  
device.  
Discs that cannot be played  
• BDs with cartridge  
• DVD-RAMs  
• HD DVDs  
• DVD Audio discs  
• PHOTO CDs  
• Data part of CD-Extras  
• VCDs/Super VCDs  
• Audio material side on DualDiscs  
Notes on discs  
This product is designed to playback discs that  
conform to the Compact Disc (CD) standard.  
DualDiscs and some music discs encoded with  
copyright protection technologies do not  
conform to the Compact Disc (CD) standard.  
Therefore, these discs may not be compatible  
with this product.  
GB  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
7)The system does not play these files via the DLNA  
renderer function.  
Playable Types of Files  
Note  
• Some files may not play depending on the file format,  
the file encoding, the recording condition, or DLNA  
server condition.  
Video7)  
File format  
Extensions  
1)5)  
• Some files edited on a PC may not play.  
• The system can recognize the following files or  
folders in BDs, DVDs, CDs and USB devices:  
– up to folders in the 5th tree  
MPEG-1 Video/PS  
“.mpg,” “.mpeg,” “.m2ts,”  
“.mts”  
MPEG-2 Video/PS,  
1)6)  
TS  
2)  
DivX  
“.avi,” “.div,” “.divx”  
– up to 500 files in a single tree  
1)5)  
MPEG4/AVC  
“.mkv,” “.mp4,” “.m4v,”  
“.m2ts,” “.mts”  
• The system can recognize the following files or  
folders stored in the DLNA server:  
1)5)  
WMV9  
“.wmv,” “.asf”  
3)  
– up to folders in the 20th tree  
5)  
AVCHD  
– up to 999 files in a single tree  
• Some USB devices may not work with this system.  
• The system can recognize Mass Storage Class (MSC)  
devices (such as flash memory or an HDD) that are  
FAT-compatible and non-partitioned, Still Image  
Capture Devices (SICDs) and 101-key keyboards.  
101-key keyboards can be recognized by the left  
(USB) port only.  
Music  
File format  
Extensions  
MP3 (MPEG-1 Audio  
Layer III)  
“.mp3”  
1)4)5)  
AAC  
“.m4a”  
“.wma”  
“.wav”  
1)4)  
WMA9 Standard  
• To avoid data corruption or damage to USB memory  
or other devices, turn the system off before  
connecting or removing USB memory or other  
devices.  
LPCM  
Photo7)  
• The system may not play high bit rate video files from  
a DATA CD smoothly. It is recommended to play  
high bit rate video files using a DATA DVD.  
File format  
Extensions  
JPEG  
“.jpg,” “.jpeg,” “.jpe”  
1)The system does not play files encoded with DRM.  
®
2)ABOUT DIVX VIDEO: DivX is a digital video  
format created by DivX, Inc. This is an official DivX  
Certified device that plays DivX video. Visit  
tools to convert your files into DivX video.  
ABOUT DIVX VIDEO-ON-DEMAND: This DivX  
®
Certified device must be registered in order to play  
DivX Video-on-Demand (VOD) content. To  
generate the registration code, locate the DivX VOD  
section in the device setup menu. Go to  
vod.divx.com with this code to complete the  
registration process and learn more about DivX  
VOD.  
3)The system plays AVCHD-format files that are  
recorded via a digital video camera, etc. To watch  
AVCHD-format files, the disc with AVCHD-format  
files on it must be finalized.  
4)The system does not play files encoded with  
Lossless, etc.  
5)The system does not play these files via the DLNA  
function.  
6)The system plays SD resolution only via the DLNA  
function.  
GB  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Supported Audio Formats  
Audio formats supported by this system are as follows.  
Format  
LPCM 2ch  
LPCM 5.1ch,  
LPCM 7.1ch  
Dolby Digital Dolby  
TrueHD,  
DTS  
DTS-ES  
Discrete 6.1,  
DTS-ES  
Matrix 6.1,  
DTS96/24  
DTS-HD  
High  
Resolution  
Audio  
DTS-HD  
Master  
Audio  
Function  
Dolby Digital  
Plus  
“BD/DVD”  
a
a
a
a
a
a
a
a
a
a
a
“SAT/CABLE”  
“TV”  
a: Supported format.  
–: Unsupported format.  
GB  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Speakers  
Front (SS-TSF770) for BDV-F700  
Specifications  
Amplifier Section  
BDV-F700:  
Speaker system  
2-Way 2-Driver Bass  
reflex  
Speaker unit  
Tweeter:  
Woofer:  
Rated impedance  
Dimensions (approx.)  
Floor:  
20 mm cone type  
40 mm × 70 mm cone type  
4 ohms  
POWER OUTPUT (rated)  
Front L/Front R:  
85 W + 85 W (at 4 ohms, 1  
kHz, 1% THD)  
POWER OUTPUT (reference)  
200 mm × 1,100 mm ×  
230 mm (w/h/d) (vertical  
angle)  
Front L/Front R:  
130 W (per channel at 4  
ohms, 1 kHz)  
Subwoofer:  
140 W (at 4 ohms, 100 Hz)  
200 mm × 1,100 mm ×  
255 mm (w/h/d) (upward  
angle)  
103 mm × 335 mm ×  
103 mm (w/h/d) (vertical  
angle)  
BDV-F500:  
POWER OUTPUT (rated)  
Front L/Front R:  
80 W + 80 W (at 4 ohms, 1  
kHz, 1% THD)  
Desktop:  
POWER OUTPUT (reference)  
Front L/Front R:  
115 W (per channel at 4  
103 mm × 360 mm ×  
109 mm (w/h/d) (upward  
angle)  
ohms, 1 kHz)  
120 W (at 4 ohms, 100 Hz)  
Subwoofer:  
Inputs (Analog)  
AUDIO (IN)  
Inputs (Digital)  
Mass (approx.)  
Floor:  
Desktop:  
Sensitivity: 450/250 mV  
2.9 kg  
0.6 kg  
SAT/CABLE (DIGITAL IN OPTICAL),  
TV (DIGITAL IN OPTICAL)  
Front (SS-TSF550) for BDV-F500  
Supported formats: LPCM  
2CH (up to 48 kHz), Dolby  
Digital, DTS  
Speaker system  
2-Way 2-Driver Bass  
reflex  
Speaker unit  
Tweeter:  
Woofer:  
Rated impedance  
Dimensions (approx.)  
20 mm cone type  
50 mm cone type  
4 ohms  
76 mm × 270 mm × 85 mm  
(w/h/d) (vertical angle)  
76 mm × 270 mm × 90 mm  
(w/h/d) (upward angle)  
0.8 kg  
Video Section  
Outputs  
VIDEO OUT: 1 Vp-p 75  
ohms  
HDMI OUT: Type A (19  
pin)  
BD/DVD/Super Audio CD/CD System  
Signal format system  
PAL/NTSC  
Mass (approx.)  
USB Section  
(USB) port:  
Type A (For connecting  
USB memory, memory  
card reader, digital still  
camera, and digital video  
camera)  
Subwoofer (SS-WSF550)  
Speaker system  
Speaker unit  
Rated impedance  
Dimensions (approx.)  
Subwoofer Bass reflex  
160 mm cone type  
4 ohms  
265 mm × 335 mm × 265  
mm (w/h/d)  
Maximum current:  
500 mA  
Mass (approx.)  
6.5 kg  
LAN Section  
LAN (100) terminal  
100BASE-TX Terminal  
General  
Power requirements  
European models:  
Tuner Section  
System  
220 V - 240 V AC,  
50/60 Hz  
PLL quartz-locked digital  
synthesizer  
Latin American models: 110 V - 240 V AC,  
50/60 Hz  
Power consumption  
FM tuner section  
Tuning range  
87.5 MHz - 108.0 MHz  
(50 kHz step)  
European models:  
On: 85 W  
Antenna (aerial)  
FM wire antenna (aerial)  
Standby: 0.3 W (at the  
Power Saving mode)  
Antenna (aerial) terminals 75 ohms, unbalanced  
Intermediate frequency 10.7 MHz  
GB  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Latin American models: On: 90 W  
Standby: 0.3 W (at the  
Power Saving mode)  
452 mm × 198 mm × 119  
mm (w/h/d) incl.  
projecting parts  
5.0 kg  
Dimensions (approx.)  
Mass (approx.)  
Design and specifications are subject to change  
without notice.  
• Standby power consumption 0.3 W.  
• Halogenated flame retardants are not used in the  
certain printed wiring boards.  
• Over 85% power efficiency of amplifier block is  
achieved with the full digital amplifier, S-Master.  
GB  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language Code List  
The language spellings conform to the ISO 639: 1988 (E/F) standard.  
Code Language  
Code Language  
Code Language  
Code Language  
1027 Afar  
1183 Irish  
1347 Maori  
1507 Samoan  
1508 Shona  
1509 Somali  
1511 Albanian  
1512 Serbian  
1513 Siswati  
1514 Sesotho  
1515 Sundanese  
1516 Swedish  
1517 Swahili  
1521 Tamil  
1028 Abkhazian  
1032 Afrikaans  
1039 Amharic  
1044 Arabic  
1045 Assamese  
1051 Aymara  
1052 Azerbaijani  
1053 Bashkir  
1057 Byelorussian  
1059 Bulgarian  
1060 Bihari  
1186 Scots Gaelic  
1194 Galician  
1196 Guarani  
1203 Gujarati  
1209 Hausa  
1349 Macedonian  
1350 Malayalam  
1352 Mongolian  
1353 Moldavian  
1356 Marathi  
1357 Malay  
1217 Hindi  
1226 Croatian  
1229 Hungarian  
1233 Armenian  
1235 Interlingua  
1239 Interlingue  
1245 Inupiak  
1358 Maltese  
1363 Burmese  
1365 Nauru  
1369 Nepali  
1376 Dutch  
1379 Norwegian  
1393 Occitan  
1403 (Afan)Oromo  
1408 Oriya  
1417 Punjabi  
1428 Polish  
1525 Telugu  
1527 Tajik  
1061 Bislama  
1066 Bengali;  
Bangla  
1248 Indonesian  
1253 Icelandic  
1254 Italian  
1528 Thai  
1529 Tigrinya  
1531 Turkmen  
1532 Tagalog  
1534 Setswana  
1535 Tonga  
1538 Turkish  
1539 Tsonga  
1540 Tatar  
1067 Tibetan  
1070 Breton  
1079 Catalan  
1093 Corsican  
1097 Czech  
1103 Welsh  
1105 Danish  
1109 German  
1130 Bhutani  
1142 Greek  
1144 English  
1145 Esperanto  
1149 Spanish  
1150 Estonian  
1151 Basque  
1157 Persian  
1165 Finnish  
1166 Fiji  
1257 Hebrew  
1261 Japanese  
1269 Yiddish  
1283 Javanese  
1287 Georgian  
1297 Kazakh  
1298 Greenlandic  
1299 Cambodian  
1300 Kannada  
1301 Korean  
1305 Kashmiri  
1307 Kurdish  
1311 Kirghiz  
1313 Latin  
1326 Lingala  
1435 Pashto; Pushto  
1436 Portuguese  
1463 Quechua  
1481 Rhaeto-  
Romance  
1543 Twi  
1557 Ukrainian  
1564 Urdu  
1482 Kirundi  
1483 Romanian  
1489 Russian  
1491 Kinyarwanda  
1495 Sanskrit  
1498 Sindhi  
1572 Uzbek  
1581 Vietnamese  
1587 Volapük  
1613 Wolof  
1632 Xhosa  
1665 Yoruba  
1684 Chinese  
1697 Zulu  
1501 Sangho  
1502 Serbo-Croatian  
1503 Singhalese  
1505 Slovak  
1327 Laothian  
1332 Lithuanian  
1334 Latvian; Lettish  
1345 Malagasy  
1171 Faroese  
1174 French  
1181 Frisian  
1506 Slovenian  
1703 Not specified  
Parental Control/Area Code List  
Code Area  
Code Area  
Code Area  
Code Area  
2044 Argentina  
2047 Australia  
2046 Austria  
2057 Belgium  
2070 Brazil  
2109 Germany  
2200 Greece  
2219 Hong Kong  
2248 India  
2238 Indonesia  
2239 Ireland  
2254 Italy  
2276 Japan  
2304 Korea  
2376 Netherlands  
2390 New Zealand  
2379 Norway  
2543 Taiwan  
2528 Thailand  
2184 United  
Kingdom  
2427 Pakistan  
2424 Philippines  
2428 Poland  
2090 Chile  
2092 China  
2436 Portugal  
2489 Russia  
2093 Colombia  
2115 Denmark  
2165 Finland  
2174 France  
2501 Singapore  
2149 Spain  
2333 Luxembourg  
2363 Malaysia  
2362 Mexico  
2499 Sweden  
2086 Switzerland  
GB  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
BD-ROM  
BD-ROMs (Blu-ray Disc Read-Only Memory)  
are commercially produced discs and are  
available in the same capacities as the BD  
below. Other than conventional movie and video  
contents, these discs have enhanced features  
such as interactive content, menu operations  
using pop-up menus, selection of subtitle  
display, and slideshow. Although a BD-ROM  
may contain any form of data, most BD-ROM  
discs will contain movies in High Definition  
format, for playback on Blu-ray Disc/DVD  
players.  
Glossary  
AVCHD  
The AVCHD format is a high-definition digital  
video camera format used to record SD  
(standard definition) or HD (high definition)  
signals of either the 1080i specification* or the  
720p specification** on DVDs, using efficient  
data compression coding technology. The  
MPEG-4 AVC/H.264 format is adopted to  
compress video data, and the Dolby Digital or  
Linear PCM system is used to compress audio  
data. The MPEG-4 AVC/H.264 format is  
capable of compressing images at higher  
efficiency than that of the conventional image  
compression format. The MPEG-4 AVC/H.264  
format enables a high definition (HD) video  
signal shot on a digital video camera recorder to  
be recorded on DVD discs in the same way as it  
would be for a standard definition (SD)  
television signal.  
Blu-ray Disc (BD)  
A disc format developed for recording/playing  
high-definition (HD) video (for HDTV, etc.),  
and for storing large amounts of data. A single  
layer Blu-ray Disc holds up to 25 GB, and a  
dual-layer Blu-ray Disc holds up to 50 GB of  
data.  
Dolby Digital  
In this format, the surround speakers output  
stereo sound with an expanded frequency range,  
and a subwoofer channel for deep bass is  
independently provided. This format is also  
called “5.1” with the subwoofer channel  
designed as the 0.1 channel (since it functions  
only when a deep bass effect is needed). All six  
channels in this format are recorded separately  
for superior channel separation. Furthermore,  
since all the signals are processed digitally, less  
signal degradation occurs.  
* A high definition specification that utilizes 1080  
effective scanning lines and the interlace format.  
**A high definition specification that utilizes 720  
effective scanning lines and the progressive format.  
BD-J application  
The BD-ROM format supports Java for  
interactive functions.  
“BD-J” offers content providers almost  
unlimited functionality when creating  
interactive BD-ROM titles.  
BD-R  
Dolby Digital Plus  
BD-R (Blu-ray Disc Recordable) is a  
recordable, write-once Blu-ray Disc, available  
in the same capacities as the BD below. Since  
contents can be recorded and cannot be  
overwritten, a BD-R can be used to archive  
valuable data or store and distribute video  
material.  
Developed as an extension to Dolby Digital, the  
audio coding technology supports 7.1 multi-  
channel surround sound.  
Dolby TrueHD  
Dolby TrueHD is a lossless coding technology  
that supports up to 8 channels of multi-channel  
surround sound for the next generation of optical  
discs. The reproduced sound is true to the  
original source bit-for-bit.  
BD-RE  
BD-RE (Blu-ray Disc Rewritable) is a  
recordable and rewritable Blu-ray Disc,  
available in the same capacities as the BD  
below. The re-recordable feature makes  
extensive editing and time-shifting applications  
possible.  
GB  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
DTS  
Parental Control  
Digital audio compression technology  
developed by DTS, Inc. This technology  
conforms to 5.1-channel surround. This format  
includes a stereo rear channel and a discrete  
subwoofer channel. DTS provides the same 5.1  
discrete channels of high quality digital audio.  
The good channel separation is realized due to  
the all channel data being recorded discretely  
and processed in digitally.  
A function of the BD/DVD to limit playback of  
the disc by the age of the users according to the  
limitation level in each country. The limitation  
varies from disc to disc; when it is activated,  
playback is completely prohibited, violent  
scenes are skipped or replaced with other scenes  
and so on.  
PhotoTV HD  
“PhotoTV HD” allows for highly-detailed  
pictures, and photo-like expression of subtle  
textures and colors. By connecting Sony  
“PhotoTV HD” compatible devices using an  
HDMI cable, a whole new world of photos can  
be enjoyed in breathtaking Full HD quality. For  
instance, the delicate texture of the human skin,  
flowers, sand and waves can now be displayed  
on a large screen in beautiful photo-like quality.  
DTS-HD High Resolution Audio  
Developed as an extension to DTS Digital  
Surround format. It supports a maximum  
sampling frequency of 96 kHz, and 7.1 multi-  
channel surround.  
DTS-HD High Resolution Audio has a  
maximum transmission rate of 6 Mbps, with  
lossy compression.  
DTS-HD Master Audio  
Pop-up menu  
DTS-HD Master Audio has a maximum  
transmission rate of 24.5 Mbps, and uses  
lossless compression, and DTS-HD Master  
Audio corresponds to a maximum sampling  
frequency of 192 kHz, and maximum of 7.1ch.  
An enhanced menu operation available on BD-  
ROMs. The pop-up menu appears when POP  
UP/MENU is pressed during playback, and can  
be operated while playback is in progress.  
Progressive format  
(sequential scanning)  
HDMI (High-Definition Multimedia  
Interface)  
In contrast to the Interlace format, the  
progressive format can reproduce 50 - 60 frames  
per second by reproducing all scanning lines  
(525 lines for the NTSC system). The overall  
picture quality increases and still images, text  
and horizontal lines appear sharper. This format  
is compatible with the 525 or 625 progressive  
format.  
HDMI is an interface that supports both video  
and audio on a single digital connection,  
allowing you to enjoy high quality digital  
picture and sound. The HDMI specification  
supports HDCP (High-bandwidth Digital  
Content Protection), a copy protection  
technology that incorporates coding technology  
for digital video signals.  
24p True Cinema  
Interlace format  
(Interlaced scanning)  
Movies shot with a film camera consist of 24  
frames per second.  
The Interlace format is the NTSC standard  
method for displaying TV images at 30 frames  
per second. Each frame is scanned twice -  
alternately between the even numbered scanning  
lines and then odd numbered scanning lines, at  
60 times per second.  
Since conventional televisions (both CRT and  
flat panels) display frames either at 1/60 or 1/50  
second intervals, the 24 frames do not appear at  
an even pace.  
When connected to a TV with 24p capabilities,  
the player displays each frame at 1/24 second  
intervals — the same interval originally shot  
with the film camera, thus faithfully reproducing  
the original cinema image.  
LTH (Low to High)  
LTH is a recording system that supports organic  
pigment type BD-R.  
GB  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
Additional Information  
Index  
Numerics  
O
A
P
E
F
G
B
H
BD Hybrid Disc Playback  
Q
HDMI  
HDMI (High-Definition  
R
BD Remote Device  
BD/DVD-ROM 1080/24p  
Registered BD Remote Devices  
Reset to Factory Default  
I
Initialize Personal Information  
Internet Video Parental Control  
S
C
Software Update Notification  
Super Audio CD Playback  
Super Audio CD Playback  
L
M
D
N
Network Connection  
GB  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The software of this system may be updated in the future. To find out details on any  
available updates, please visit the following URL.  
Printed in Malaysia  
(1)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser Headphones SH 330 User Manual
Sharp Calculator EL 9900 User Manual
Sharp Portable CD Player DK KP85PH User Manual
Sony Bluetooth Headset VBD MA1 User Manual
Sony Car Stereo System XR C6100 User Manual
Sony Computer Monitor GDM F500T9 User Manual
Sony Digital Camera DIGIMAX S850 User Manual
Sony Video Gaming Accessories 22035 User Manual
Sprint Nextel Cell Phone Dura XT User Manual
SysKonnect Network Card SK 98xx User Manual