Instructions
Getting to know your camera
Thank you for buying a Samsung Digital Camera.
■ Use this camera in the following order.
● Prior to using this camera, please read the user manual thoroughly.
● When you require After Sales service, please bring the camera and the cause of
the camera malfunction (such as battery, Memory card etc.) to the A/S centre.
● Please check that the camera is operating properly prior to when you intend to
use it (e.g. for a trip or an important event) to avoid disappointment. Samsung
camera takes no responsibility for any loss or damages that may result from
camera malfunction.
Before connecting the camera to a PC, via
the USB cable, you will need to set up the
camera driver. Install the camera driver
that is contained in Application software
CD-ROM. (p.74)
Set up the camera driver
● Keep this manual in a safe place.
Take a picture
Take a picture. (p.14)
● The contents and illustrations of this manual are subject to change without prior
notice for upgrading the camera functions.
ꢀ Microsoft, Windows and Windows logo are registered trademarks of Microsoft
Corporation incorporated in the United States and/or other countries.
ꢀ All brand and product names appearing in this manual are registered trademarks
of their respective companies.
Insert the supplied USB cable into the
PC’s USB port and the camera’s USB
connection terminal. (p.77)
Insert the USB cable
Check the camera’s power. If the power is
turned off, press the camera button to turn
it on.
Check the camera’s power
Check [Removable Disk]
Open Window’s EXPLORER and search
for [Removable Disk]. (p.79)
《1》
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution
Contents
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in a minor or moderate injury.
■How to use the ASR (Advanced
Shake Reduction) mode …………15
■Wise Shot …………………………16
■How to use the SCENE mode …16
■How to use the MOVIE CLIP
READY
■ Leaking, overheating, or damaged battery could result in fire or injury.
•Use battery with the correct specification for the camera.
•Do not short circuit, heat or dispose of battery in fire.
●System chart ………………………5
●Identification of features ……………6
■Front & Top…………………………6
■Back & Bottom ……………………7
■Bottom / 5-function button …………8
■Self-timer lamp ……………………8
■Camera Status Lamp………………8
■Mode icon …………………………9
●Connecting to a Power Source ……9
●Inserting the memory card ………10
●Instructions on how to use the
•Do not insert the battery with the polarities reversed.
mode ………………………………17
■Recording the movie clip without
voice ………………………………17
■Pausing while recording a movie clip
(Successive Recording) …………17
■Using Successive Recording ……17
■How to use the VOICE
■ Remove the battery when not planning to use the camera for a long period of
time. Otherwise the battery may leak corrosive electrolyte and permanently
damage the camera’s components.
■ Do not fire the flash while it is in contact with hands or objects. Do not touch the
flash after using it continuously. It may cause burns.
■ Do not move the camera while it is switched on, if you are using the AC Charger.
After use, always switch off the camera before unplugging the cable from the
wall socket. Then make sure that any connector cords or cables to other devices
are disconnected before moving the camera. Failure to do so may damage the
cords or cables and cause a fire or electric shock.
RECORDING mode………………18
●Things to Watch Out for When
memory card ………………………11
■ Take care not to touch the lens or lens cover to avoid taking an unclear image
and possibly causing camera malfunction.
Taking Pictures ………………………18
●Using the camera buttons to set the
camera ……………………………19
■POWER button……………………19
■Shutter button ……………………19
■ZOOM W / T button ………………20
■Voice recording / Voice memo UP
button………………………………21
■Macro / Down button ……………22
■Focus lock…………………………23
■Flash / Left button…………………24
■Self-timer / Right button …………26
■MENU / OK button ………………26
RECORDING
■ Avoid obstructing the lens or the flash when you capture an image.
■ Before inserting any cables or AC adapter, check the directions and do not insert
by force. It may cause breakage of cable or camera.
●LCD monitor indicator ……………13
●Starting the recording mode………14
■How to use the AUTO mode ……14
■ Credit cards may be demagnetized if left near case. Avoid leaving magnetic strip
cards near the case.
■How to use the PROGRAM
mode ………………………………14
■How to use the APERTURE
PRIORITY mode …………………14
■How to use the SHUTTER PRIORITY
mode ………………………………15
■How to use the MANUAL mode …15
《3》
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
■E (Effect) button …………………27
■Special Effect : Colour ……………27
■Special Effect :
■On camera movie trimming………41
■Playing back a recorded voice …42
●LCD monitor Indicator ……………42
■PictBridge : Print Setting …………58
■Shutter sound ……………………67
■PictBridge : Printing ………………59 ●Important notes ……………………68
■PictBridge : DPOF Printing ………60 ●Warning indicator …………………69
■PictBridge : Reset…………………60 ●Before contacting a service
centre ………………………………70
Preset focus frames………………28 ●Using the camera buttons to set the
■Special Effect :
camera ……………………………43
Composite shooting ………………29
■Special Effect : Photo Frame ……30
■Movie Clip frame stabiliser ………31
■+/ - button …………………………31
■
Thumbnail / Enlargement button…43
■Voice memo/ Up button …………44
■Play & Pause / Down button ……45
■E (Effect) button …………………45
■Delete button ……………………46
■Printer button ……………………47
■Left/ Right/ Menu/ OK button ……47
●Specifications………………………72
SETUP
●Setup menu ………………………61
SOFTWARE
■File name …………………………62
●Using the LCD monitor to set the
■Auto power off ……………………62 ●Software Notes ……………………74
■Language …………………………62 ●System Requirements ……………74
■Formatting a memory ……………63 ●About the software ………………74
camera settings ……………………34
■How to use the menu ……………35
■Size ………………………………36 ●Setting up the play back function
■Setting up the Date/ Time/
●Setting up the application
■Quality/ Frame rate ………………36
■Metering …………………………37
■Auto Focus type …………………37
■Continuous shot …………………38
■Sharpness…………………………39
■OSD (On Screen Display)
using the LCD monitor ……………48
■Starting the slide show……………50
■On Screen Display information …51
■Rotating an image ………………51
■Resize ……………………………52
■Protecting images ………………53
■Deleting images …………………53
■Copy To Card ……………………54
■DPOF ……………………………55
■DPOF : Standard …………………55
■DPOF : Index ……………………56
■DPOF : Print size …………………56
■PictBridge …………………………57
■PictBridge : Picture Selection ……57
Date type …………………………63
software ……………………………75
■World Time ………………………64 ●Starting PC mode …………………77
■Imprinting the recording date ……64 ●Removing the removable disk ……79
■Auto Focus lamp …………………64 ●Setting up the USB Driver
■Sound ……………………………64
for MAC ……………………………80
■Connecting an External Device
●Using the USB Driver for MAC …80
information ………………………39
(USB)………………………………65 ●Removing the USB Driver for
■LCD brightness……………………65 Windows 98SE ……………………80
■Selecting Video out type …………65 ●Digimax Master ……………………81
■Quick view…………………………66 ●FAQ ………………………………83
■Initialisation ………………………66
PLAY
●Starting play mode ………………40
■Playing back a still image ………40
■Playing back a movie clip ………40
■How to capture the movie clip……41
●Setting up the Mycam menu ……67
■Start up image ……………………67
■Start up sound ……………………67
《4》
Download from Www.Somanuals.com. All Manuals Search And Download.
System chart
Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your
nearest Samsung dealer or Samsung service centre.
< Included items >
User manual,
Computer
(see p.77)
PictBridge compatible printer
(see p.57)
Camera case
Camera strap
Software CD
(see p.74)
Product warranty
DPOF compatible
printer (see p.55)
SD memory card/ MMC
(see p.10)
USB cable
AV cable
Rechargeable battery
(SNB-2512)
AA Alkaline
Batteries
or
External monitor
(see p. 65)
Charger(SBC-N1)
Charger(SBC-N2)
AC cord
《5》
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of features
Front & Top
Mode dial
Power button
Speaker
Shutter button
Flash
Self-timer lamp /
Auto focus lamp
USB / AV connection terminal
DC input connection port
Lens / Lens cover
Microphone
《6》
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of features
Back & Bottom
Camera status lamp
Zoom T button (Digital zoom)
Zoom W button (Thumbnail)
E (Effects) button
LCD monitor
Strap eyelet
+/- button, Delete button
5 function button
Play mode /
Tripod socket
Printer button
《7》
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of features
■ Self-timer lamp
Bottom / 5-function button
Icon
Status
Description
For the first 7 seconds, the lamp blinks at 1 second
intervals.
Battery chamber cover
Blinking
For the final 3 seconds, the lamp blinks quickly at 0.25-
second intervals.
For the 2 seconds, the lamp blinks quickly at 0.25-second
intervals before taking a picture
Blinking
Blinking
Memory card slot
Battery chamber
A picture will be taken after about 10 seconds and 2
seconds later a second picture will be taken.
■Camera Status Lamp
Status
Description
The lamp turns on and off when the camera is ready to
take a picture
Power on
Voice memo / Voice Recording / Up button
The lamp blinks while saving the image data and turns
off when the camera is ready to take a picture
After taking a picture
Menu / OK button
While voice memo recording The lamp blinks
While voice recording The lamp blinks
Transmitting Data with a PC The lamp turns on (LCD monitor turns off)
Flash /
Self-timer /
When the USB cable is
The lamp is off
Left button
Right button
inserted to a printer
When the printer is printing The lamp blinks
The lamp turns on (The camera focus on the subject)
When the AF activates
The lamp blinks (The camera doesn't focus on the subject)
Macro / Down button
Play & Pause button
《8》
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of features
Connecting to a Power Source
■ Mode icon: Refer to page 15~18 for more information about the camera mode
Using the batteries
setting.
● We recommend using batteries for a digital camera (Within a year from the date
MODE
Icon
AUTO
ASR
PROGRAM
MOVIE
A
S
M
of manufacture). The batteries are listed below.
- Non rechargeable batteries
: 2 X AA Alkaline (High Capacity)
- Rechargeable batteries (Optional) : SNB-2512 (Ni-MH)
MODE
Icon
PLAY
-
-
VOICE RECORDING
Model
SNB-2512
Type
Ni-MH
SCENE
MODE
Icon
Capacity
Voltage
2500mAh
NIGHT PORTRAIT CHILDREN LANDSCAPE
TEXT
CLOSE UP
1.2V x 2
Approximately 300 Minutes(Use for SBC-N2)
Approximately 240 Minutes(Use for SBC-N1)
Charging time
MODE SUNSET
Icon
DAWN
BACKLIGHT FIREWORKS BEACH & SNOW
-
-
※ Included battery may vary depending on sales region.
《9》
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Power Source
■ There are 4 indicators for battery condition that are displayed on the LCD
INFORMATION
monitor.
Important information about battery usage
Battery
● When the camera is not used, turn off the camera power.
● Please remove the battery if the camera will not be used for long periods.
Battery can lose power over time and are prone to leaking if kept inside the
camera.
indicator
Low battery
capacity (Prepare
to recharge
Low battery
capacity
Low battery
capacity
Battery
status
The battery is
fully charged
● Low temperatures (below 0˚C) can affect the performance of the battery
and you may experience reduced battery life.
(Prepare to
(Prepare to
or use spare
battery)
recharge or use recharge or use
spare battery) spare battery)
● Batteries will usually recover at normal temperatures.
● During extended use of the camera, the camera body may become warm.
This is perfectly normal.
■ Insert the battery as shown
Inserting the memory card
- If the camera does not turn on after you
have inserted battery, please check
whether the battery is inserted with the
correct polarity (+ / -).
■ Insert the memory card as shown.
- Turn off the camera’s power before
inserting the memory card.
- When the battery chamber cover is
opened, do not press the battery
chamber cover by force. This may cause
damage to the battery chamber cover.
- Have the front of the memory card facing
toward the front of the camera (lens) and
the card pins toward the back of the
camera (LCD monitor).
- Do not insert the memory card the wrong
way round. Doing so may damage the
memory card slot.
《10》
Download from Www.Somanuals.com. All Manuals Search And Download.
Instructions on how to use the memory card
● Be sure to format the memory card (see p.63) if you are using a newly
purchased memory for the first time, if it contains data that the camera cannot
recognise, or if it contains images captured with a different camera.
● Turn off the camera power whenever the memory card is being inserted or
removed.
● If the memory card is subjected to any of the following, the recorded data may
become corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while recording,
deleting (formatting) or reading.
● Repeated use of the memory card will eventually reduce the memory card’s
performance. Should this be the case, you will need to purchase a new memory
card. Wear and tear on the memory card is not covered by the Samsung
warranty.
● Samsung cannot be held responsible for lost data.
● It is advisable to copy important data onto other media as back-up e.g. floppy
disks, hard disks, CD etc.
● If there is insufficient memory available
● The memory card is an electronic precision device.
Do not bend, drop or subject the memory card to any heavy impact.
● Do not store the memory card in an environment with strong electronic or
magnetic fields, e.g. near loud speakers or TV receivers.
● Please do not use or store in an environment where there are extremes in
temperature.
: A [Memory Full!] message will appear and the camera will not operate. To
optimise the amount of memory in the camera, replace the memory card or
delete unnecessary images stored on the memory card.
● Do not allow the memory card to become dirty or to come into contact with any
liquid. Should this happen, clean the memory card with a soft cloth.
● Please keep the memory card in its case when not in use.
● During and after periods of extended use, you may notice that the memory card
is warm. This is perfectly normal.
● Do not use a memory card that is used in another digital camera.
To use the memory card in this camera, format the memory card using this
camera.
● Do not use a memory card formatted by another digital camera or memory card
reader.
《11》
Download from Www.Somanuals.com. All Manuals Search And Download.
Instructions on how to use the memory card
■ When using a 256MB MMC (Multi Media Card), the specified shooting capacity
will be as follows. These figures are approximate as image capacities can be
affected by variables such as subject matter and memory card type.
INFORMATION
● Don't remove the memory card when the camera status lamp is blinking as
this may cause damage to data in the memory card.
Recorded image size
8M
Super Fine
Fine
103
158
265
663
115
134
Normal
180
57
93
■ The camera can use SD/SDHC Memory Cards and MMC (Multi Media Cards).
Please consult the enclosed manual for using the MMC Cards.
5M
271
Still image
3M
172
558
68
425
Card pins
1M
742
7M(P)
206
Print
Write protect
switch
Wide
6M(W)
84
233
Label
30FPS
20FPS
15FPS
Recorded image size
800
10' 56"
11' 53"
-
-
About
About
About
About
About
About
About
About
[ SD (Secure Digital) memory card ]
720
640
320
11' 44"
15' 48"
48' 08"
15' 12"
18' 20"
67' 52"
* Movie clip
11' 10"
39' 03"
About
About
The SD/SDHC memory card has a write protect switch that prevents image files
from being deleted or formatted. By sliding the switch to the bottom of the
SD/SDHC memory card, the data will be protected. By sliding the switch to the top
of the SD/SDHC memory card, the data protection will be cancelled.
※ The recording times can be changed by the zoom operation.
The zoom button doesn’t use during the movie recording.
Slide the switch to the top of the SD/SDHC memory card before taking a picture.
《12》
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD monitor indicator
■ The LCD monitor displays information about the shooting functions and
No.
4
Description
Icons
Page
p.38
selections.
Continuous shot
①
ꢀ
ꢁ
p.24~25
/ p.17
5
Flash / Without Sound
⑳
6
Self-timer
Macro
p.26
p.22~23
p.37
-
②
7
⑲
⑱
⑰
⑯
③
④
8
Metering
9
Card inserted indicator
Auto focus frame
Camera shake warning
Date / Time
⑤
⑥
⑦
10
11
12
13
14
15
16
17
18
p.37
p.18
p.63
p.34
p.33
p.32
p.32
p.39
p.36
⑮
⑭
2007/01/01 01:00 PM
⑧
⑨
Exposure compensation
White Balance
ISO
⑬
⑩
⑪
⑫
RGB
RGB
Sharpness
[Image & Full Status]
Image quality / Frame rate
19
20
Image size
p.36
No.
Description
Icons
Page
Number of available shots remaining
Remaining time (Movie clip/ Voice recording)
Voice memo
7
p.12
p.12
p.21
p.20
1
Recording mode
p.14~18
00:01:30/ 01:00:00
2
3
Battery
p.10
21
22
Optical/ Digital Zoom bar/ Digital Zoom rate
Aperture Value / Shutter Speed
F2.8, 1/30
p.14~15
《13》
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting the recording mode
■ How to use the AUTO mode (
)
Please select this mode for quick and easy picture taking with minimal user
interaction.
■ How to use the PROGRAM mode (
)
Selecting the automatic mode will configure the
camera with optimal settings. You can still manually
configure all functions except the aperture value and
shutter speed.
1. Insert the batteries (p.10). Insert the batteries
taking note of the polarity (+ / -).
1. Select the PROGRAM mode by rotating the mode
dial.
2. Insert the memory card (p.10). As this camera has
a 20MB internal memory, you do not need to insert
the memory card. If the memory card is not
inserted, an image will be stored in the internal
memory. If the memory card is inserted, an image
will be stored on the memory card.
2. Press the menu button to configure advanced
functions such as image size (p.36), quality (p.36),
metering (p.37), auto focus type (p.37), continuous
shooting (p.38), sharpness(p.39) and OSD
information(p.39).
[ PROGRAM mode ]
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
(If the date/ time that is displayed on the LCD
[ AUTO mode ]
■ How to use the APERTURE PRIORITY mode (
)
monitor is incorrect, reset the date / time before
taking a picture.)
1. Select the APERTURE PRIORITY Mode by
rotating the mode dial.
5. Select the AUTO mode by rotating the mode dial.
6. Point the camera towards the subject and compose the image by using the
LCD monitor.
2. Set the aperture value by using the +/-, up/down
button.
7. Press the shutter button to capture an image.
3. Press the + / - button twice and take an image.
INFORMATION
[APERTURE PRIORITY mode]
● If the auto focus frame turns to red when you press the shutter button down
half way, it means that the camera cannot focus on the subject. Should this
be the case, the camera is unable to capture an image clearly.
* Smaller Aperture values make the object sharp but blur the background.
Larger Aperture values make both the object and background sharp.
《14》
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting the recording mode
■ How to use the SHUTTER PRIORITY mode (
1. Select the SHUTTER PRIORITY Mode by
rotating the mode dial.
)
■ How to use the ASR (Advanced Shake Reduction) mode (
Advanced Shake Reduction (ASR) mode.
)
This mode will reduce the effect of camera shake and
help you get a well-exposed image in dim conditions.
Press the ASR button.
2. Set the shutter speed by using the +/-, Left/Right
button.
3. Press the + / - button twice and take an image.
● Things to watch out for using the ASR mode
1. The digital zoom will not operate in the ASR
mode.
* High Shutter speeds can capture a moving object in a
still image as if the object is not moving. Low Shutter
speeds can capture a moving object with an ‘active’
effect.
2. If the lighting conditions are brighter than
fluorescent lighting condition, the ASR doesn’t
activate.
[SHUTTER PRIORITY mode]
3. If the lighting condition is darker than in
fluorescent lighting condition, camera shake
[ASR mode]
warning indicator (
results only take pictures in situations where
the camera shake warning indicator ( ) is not displayed.
) will display. For best
■ How to use the MANUAL mode (
)
4. If the subject is moving the final image captured may be blurred.
5. Avoid moving the camera while the [Capturing!] message is displayed to
achieve a better result.
You can manually configure all functions with the
aperture value and shutter speed.
1. Select the MANUAL mode by rotating the mode
dial.
6. As the ASR uses the camera’s digital processor, images taken using the ASR
may take a little longer for the camera to process.
2. Press the + / - button and menu for the shutter
speed and aperture value will display.
Up / Down button
Left / Right button
: changes aperture value
: changes shutter speed.
3. Press the + / - button twice and take an image.
[MANUAL mode]
《15》
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting the recording mode
■ Wise Shot
■ How to use the SCENE mode (
)
2 images are taken at a time. One is taken in the Fill-In Flash mode and the other
is taken in the ASR mode. You can select and save only one of the images.
Use the menu to easily configure optimal settings
for a variety of shooting situations.
1. Select the SCENE mode by rotating the mode
dial.
2. Press the menu button and select a desired
scene menu.
● How to use the Wise Shot
1. Select the ASR mode by rotating the mode dial.
2. Press the Menu button and the Wise Shot
function is activated.
3. Press the Shutter button to capture images.
4. Captured images are displaying.
[SCENE mode]
- To select image, press the Left/Right button.
※The scene modes are listed below.
[Nightscene]
(
)
: Use this for shooting still images at night or in other
dark conditions.
Image with the ASR
mode
[Portrait]
(
(
)
)
: To take a picture of a person.
Image with Flash
Enlarged image
[Children]
: To take a picture of fast moving objects, for
example, children.
Enlarged image
[Landscape]
[Text]
(
(
(
)
)
)
: To take pictures of distant scenery.
: Use this mode to shoot a document.
: Close-up shooting for small objects such as plants
and insects.
Save: OK
Move.:
ꢀꢁ
[Close up]
5. Press the OK / Shutter button and the selected image will be saved.
[Sunset]
[Dawn]
(
(
(
(
)
)
)
)
)
: For taking pictures of sunsets.
: Daybreak scenes..
[Backlight]
[FIirework]
: Portrait without shadows caused by backlight.
: Firework scenes.
INFORMATION
● In the Wise shot mode, the shutter speed value shown on the LCD monitor may be
[Beach&Snow] (
: For ocean, lake, beach and snowscape scenes.
different with the real shutter speed.
● Wise shot can be taken at
,
,
,
size.
《16》
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting the recording mode
■ How to use the MOVIE CLIP mode (
)
■ Pausing while recording a movie clip (Successive Recording)
This camera allows you to temporarily stop during unwanted scenes, while
recording a movie clip. Using this function, you can record your favourite scenes
into a movie clip without having to create multiple movie clips.
A movie clip can be recorded for as long as the
available recording time of the memory capacity
allows.
1. Select the MOVIE CLIP mode by rotating the
mode dial.
2. The MOVIE CLIP mode icon and available
recording time will display on the LCD monitor.
3. Point the camera towards the subject and
compose the image by using the LCD monitor.
Press the shutter button and movie clips are
recorded for as long as the available recording time.
● Using Successive Recording
1. Press the shutter button and movie clips are
recorded for as long as the available recording
time. Movie clips will still be recorded if the shutter
button is released.
[ MOVIE CLIP mode ]
2. Press the Pause button (
) to pause
Stop:Shutter Pause:
ꢀ/
Movie clips will still be recorded if the shutter button is released.
If you wish to stop recording, press the shutter button again.
* Image size and type are listed below.
recording. Press the Pause button (
resume the recording.
) again to
[Successive recording of a movie clip]
3. If you wish to stop recording, press the shutter
button again.
- Image size : 800X592, 720X480, 640x480, 320x240 (Selectable)
- File type
: *.avi (MPEG-4)
INFORMATION
■ Recording the movie clip without voice
You can record the movie clip without voice.
● 30 FPS cannot be used in 800X592, 720X480 size.
1. Press the Up button and the (
display on the LCD monitor.
) icon will
2. Press the shutter button and movie clip is
recorded for as long as the available recording
time without voice.
3. To stop the recording, press the shutter button
again.
[ MOVIE CLIP mode ]
《17》
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting the recording mode
Things to Watch Out for When Taking Pictures
■ Pressing the shutter button down half way.
■ How to use the VOICE RECORDING mode (
A voice can be recorded for as long as the available
recording time (max:1hour) allows.
)
Lightly press the shutter button to confirm focus and flash battery charge.
Press the shutter button all way down to take the picture.
1. In any mode with the exception of Movie clip mode,
select the VOICE RECORDING mode by pressing
the Voice recording button twice.
2. Press the shutter button to record a voice.
- Press the shutter button once and voice is
recorded for as long as the available recording
time (max:1hour) allows. The recording time will
be displayed on the LCD monitor. Voice will still
be recorded if the shutter button is released.
- If you wish to stop recording, press the shutter
button again.
[ Lightly press the shutter button ]
[ Press the shutter button ]
REC:Shutter
EXIT:
ꢀ
■ The available recording time may vary depending on shooting conditions and
camera settings.
[ VOICE RECORDING mode ]
■ When the Flash Off or Slow synchro mode is selected in a low lighting condition,
- File type : *.wav
the camera shake warning indicator (
) may appear on the LCD monitor.
* A distance of 40cm between you and the camera (microphone) is the best
distance to record sound.
In this case, use a tripod, support the camera on a solid surface or change to
flash shot mode.
■ Shooting against the light :
Please do not take pictures to the sunlight direction. Taking a picture against the
sun may make the picture dark. To take a picture against the sun, please use the
[Backlight] in the scene shooting mode (see page 16), fill-in flash (see page 25),
spot metering (see page 37), or exposure compensation (see page 34).
■ Avoid obstructing the lens or the flash when you capture an image.
■ Compose the image by using the LCD monitor.
《18》
Download from Www.Somanuals.com. All Manuals Search And Download.
Things to Watch Out for When Taking Pictures
Using the camera buttons to set the camera
■ Under certain conditions the auto focus system may not perform as expected.
- When photographing a subject that has little contrast.
- If the subject is highly reflective or shiny.
■ The recording mode function can be set up by using the camera buttons.
- If the subject is moving at high speed.
POWER button
- When there is strong reflected light, or when the background is very bright.
- When the subject matter has only horizontal lines or the subject is very narrow
(such as a stick or flagpole).
● Used for turning the camera’s power on / off.
● If there is no operation during the specified time,
the camera's power will be turned off automatically
to save battery life.
- When the surroundings are dark.
Refer to page 62 for more information about the
auto power off function.
Shutter button
● Used for taking an image or recording voice in the
RECORDING mode.
● In MOVIE CLIP mode
Pressing the shutter button down fully starts the
process for recording a movie clip. Press the
shutter button once and the movie clip is recorded
for as long as the available recording time in the
memory allows. If you wish to stop recording, press the shutter button again.
● In STILL IMAGE mode
Pressing the shutter button down halfway activates the autofocus and checks
the condition of the flash. Pressing the shutter button down fully takes and stores
the image. If you select voice memo recording, the recording will start after the
camera has finished storing the image data.
《19》
Download from Www.Somanuals.com. All Manuals Search And Download.
ZOOM W / T button
● If the menu is not displayed, this button works as
● WIDE Zoom
the OPTICAL ZOOM or DIGITAL ZOOM button.
Optical zoom WIDE
: Pressing the ZOOM W button. This will zoom out from
the subject i.e. the subject will appear farther away.
Pressing the ZOOM W button continuously will set the
camera to its minimum zoom setting i.e. the subject
appears at its farthest from the camera.
● This camera has a 5X optical zoom and a 5X digital zoom function.
Using both will offer a total zoom ratio of 25X.
Pressing
Pressing
the ZOOM
W button
● TELE Zoom
the ZOOM
W button
Optical zoom TELE
: Pressing the ZOOM T button. This will zoom into the
subject i.e. the subject will appear nearer.
Digital zoom TELE
: When the maximum (5X) optical zoom is selected,
pressing the ZOOM T button activates the digital zoom
software. Releasing ZOOM T button stops the digital
zooming at the required setting. Once the maximum
digital zoom (5X) is achieved, pressing the ZOOM T
button will have no effect.
[ TELE zoom ]
[ Optical zoom 2X ]
[ WIDE zoom ]
Digital zoom WIDE
Optical zoom
: When the digital zoom is in operation, pressing the
ZOOM W button will reduce the digital zooming in
steps. Releasing ZOOM W button stops digital
zooming. Pressing the ZOOM W button will reduce the
digital zoom and then it will continue to reduce the
optical zoom until the minimum setting is reached.
Pressing
Pressing
the ZOOM
T button
Digital zoom
the ZOOM
T button
Pressing
the ZOOM
W button
Pressing
the ZOOM
W button
[ WIDE zoom ]
[ TELE zoom ]
[ Digital zoom 5X ]
[ Digital zoom 5X ]
[ TELE zoom ]
[ WIDE zoom ]
《20》
Download from Www.Somanuals.com. All Manuals Search And Download.
ZOOM W / T button
Voice recording(
) / Voice memo(
) / UP button
■ While the menu is showing, press the UP button to move up the sub menu.
INFORMATION
When the menu is not displayed on the LCD monitor, the UP button operates as
● Images taken using the digital zoom may take a little longer for the camera
to process. Allow time for this to take place.
the voice recording or voice memo (
) button. You can add your voice-over to
a stored still image. Refer to page 18 for more information about the voice
recording.
● The digital zoom cannot be used in movie clip shots.
● You may notice a decrease in image quality when using the digital zoom.
● To view a clearer digital zoom image, press the shutter button halfway at the
maximum (5X) optical zoom position and press the zoom T button again.
● The digital zoom can't be activated in the Nightscene, Children, Text, Close
up, Firework, ASR mode.
● Recording a voice memo
1. Rotate the MODE DIAL to select a RECORDING mode with the exception of
MOVIE CLIP mode.
2. Press the VOICE MEMO (
) button. If the voice memo indicator is
● Take care not to touch the lens to avoid taking an unclear image and
possibly causing camera malfunction. If the image is dim, turn the camera
power off and on again to modify the lens position.
displayed on the LCD monitor, the setting is completed.
● Take care not to press the lens as this may cause a camera malfunction.
● When the camera is turned on, take care not to touch the camera's moving
lens parts as this may cause the resulting image to be dim and unclear.
Stop:Shutter
[Preparing for Voice Memo]
[Recording Voice Memo]
3. Press the shutter button and take a picture. The picture is stored on the
memory card.
4. Voice memo will be recorded for ten seconds from the moment the picture is
stored. In the middle of the sound recording, pressing the shutter button will
stop the voice memo.
INFORMATION
● A distance of 40cm between you and the camera (microphone) is the best
distance to record sound.
● The Voice memo can't be activated in Motion capture, Interval shots.
《21》
Download from Www.Somanuals.com. All Manuals Search And Download.
Macro(
)/ Down button
■ While the menu is showing, press the DOWN button to move from the main
menu to a sub menu, or to move down the sub menu. When the menu is not
showing, you can use the MACRO / DOWN button to take macro pictures. The
distance ranges are shown below. Press the Macro button until the desired
macro mode indicator displays on the LCD monitor.
INFORMATION
● When the macro mode is selected, it is possible that camera shake will
occur. Take care not to shake the camera.
● When you take a picture within 20cm in the Macro mode, select the FLASH
OFF mode.
■ In the Program, A, S, M modes, you can change the aperture value and shutter speed
by pressing this button.
●Manual Focus : Where the automatic focusing is not
available, for example, in very dark
conditions, you can set the focus
manually. Please be careful when
using the manual focus as the picture
can be blurred easily.
[Auto macro (
)]
[Macro (
)]
[Super Macro (
)]
(Unit : cm)
Focus range
■ Types of focus modes and focus ranges (W: Wide, T: Tele)
Mode Focus Type
Focus range
W:80-Infinity
T:80-Infinity
W:10-Infinity
T:50-Infinity
W:80-Infinity
T:80-Infinity
Mode Focus Type
Macro
●How to use the Manual Focus
W:10~80
T:50~80
Auto
1. Press the Macro button three times. Then Manual
Focus bar will be displayed.
Auto
2. Set the focal length by using the Up/ Down button.
Press the shutter button to capture an image.
Up button : moves the point of focus further away
Down button : moves the point of focus nearer
W:1~10
Auto
Super
Program
macro
Macro
(Wide only)
W:1-Infinity
T:50-Infinity
Manual
focus
Program Normal
《22》
Download from Www.Somanuals.com. All Manuals Search And Download.
Macro( )/ Down button
Focus lock
■ Available focusing method, by recording mode
■ To focus on a subject not positioned in the centre of the picture, use the focus
(O: Selectable , X: Not selectable, ∞: Infinity focus range)
lock function.
Mode
● Using the Focus Lock
1. Ensure the subject is in the centre of the autofocus frame.
2. Press the SHUTTER button halfway. When the green auto focus frame lights
up, it means the camera is focused on the subject. Be careful not to press the
SHUTTER button all the way down to avoid taking an unwanted picture.
3. With the SHUTTER button still pressed down only halfway, move the camera
to recompose your picture as desired, and then press the SHUTTER button
completely to take the picture. If you release your finger from the SHUTTER
button, the focus lock function will be cancelled.
O
X
O
X
X
O
O
X
O
O
X
O
O
O
X
X
X
O
X
X
O
O
X
O
X
Normal
Macro
O
X
O
Auto Macro
Super Macro
Manual focus
O
O
O
O
O
O
O
SCENE
Mode
O
O
X
X
X
X
O
X
X
X
X
∞
X
X
X
X
X
X
O
X
X
X
O
X
X
X
-
Normal
Macro
X
X
X
X
Auto Macro
Super Macro
Manual focus
Mode
1. The image to be
captured.
2. Press the SHUTTER
button halfway and focus
on the subject.
3. Recompose the picture
and fully press the
SHUTTER button.
-
Normal
∞
X
X
X
X
∞
X
X
X
X
O
X
X
X
X
∞
X
X
X
X
O
X
X
X
X
-
Macro
-
Auto Macro
Super Macro
Manual focus
-
-
《23》
Download from Www.Somanuals.com. All Manuals Search And Download.
Flash ( )/ Left button
■ When the menu is displayed on the LCD monitor,
pressing the LEFT button makes the cursor shift to
the left tab.
INFORMATION
● Using the flash frequently will reduce the life of the battery.
● Under normal operating conditions the charging time for the flash is
normally within 5 seconds. If the battery is weak, the charging time will be
longer.
■ When the menu is not displayed on the LCD monitor,
the LEFT button operates as the FLASH
(
) button.
● During the continuous shot, AEB, Motion capture, Interval shot and movie
clip mode, the flash function will not operate.
[Selecting the Auto flash]
● Selecting the flash mode
● Take photographs within the flash range.
1. Rotate the MODE DIAL to select a RECORDING mode with the exception of
MOVIE CLIP mode.
● The image quality is not guaranteed if the subject is too close or highly
reflective.
2. Press the Flash button until the desired flash mode indicator displays on the
LCD monitor.
● When taking an image in poorly lit conditions with the flash, there may be a
white speck in the captured image. The speck is caused by the reflecting of
the flash light from the atmospheric dust. It is not camera malfuction.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
(Unit : m)
Auto macro
● Flash range
Normal
Macro
WIDE
0.2~0.8
ISO
WIDE
0.8~3.0
TELE
TELE
WIDE
TELE
AUTO
0.8~2.5
0.5~0.8
0.2~3.0
0.5 ~2.5
《24》
Download from Www.Somanuals.com. All Manuals Search And Download.
Flash ( )/ Left button
● Flash mode indicator
● Available flash mode, by recording mode
(O : Selectable X : Not selectable)
Menu tab
Flash mode
Auto flash
Description
X
X
X
X
O
X
O
X
X
O
O
O
O
O
O
X
X
O
X
O
X
X
O
X
O
X
X
O
X
O
X
X
X
X
O
If the subject or background is dark, the camera flash
will operate automatically.
Auto &
Red eye
reduction
If a subject or background is dark, the camera flash
will work automatically and will reduce the red-eye
effect by using the red-eye reduction function.
Scene modes
The flash fires regardless of available light.
The intensity of the flash will be controlled, according to
the prevailing conditions. The brighter the background
or subject is, the less intense the flash will be.
Fill in flash
X
X
X
O
O
X
O
X
X
O
X
X
X
X
X
O
X
X
X
X
O
X
X
X
X
O
X
X
X
X
O
X
X
X
X
O
X
X
X
X
X
O
O
X
X
X
X
O
X
X
O
X
O
X
X
The flash will operate in conjunction with a slow
shutter speed in order to obtain the correct exposure.
When you take an image in a condition with poor
light, the camera shake warning indicator
Slow synchro
(
) will display on the LCD monitor.
We recommend using a tripod for this function.
The flash does not fire. Select this mode when
capturing images in a place or situation where flash
photography is prohibited. When you capture an image
in a poorly lit condition, the camera shake warning
Flash off
indicator (
) will display on the LCD monitor. We
recommend using a tripod for this function.
《25》
Download from Www.Somanuals.com. All Manuals Search And Download.
Self-timer( ) / Right button
■ When the menu is displayed on the LCD monitor, pressing the Right button makes the
INFORMATION
cursor shift to the right tab.
● If you operate the Self-timer and Play mode button during the self-timer
operation, the self-timer function is cancelled.
■ When the menu is not displayed on the LCD monitor, the RIGHT button operates as
the Self-timer(
) button. This function is used when the photographer would also
● Use a tripod to prevent the camera from shaking.
like to be in the image.
● In Movie Clip mode, only the 10SEC self-timer will work.
● Selecting the self-timer
1. Rotate the MODE DIAL to select a RECORDING
mode with the exception of VOICE RECORDING
mode.
MENU / OK button
■ MENU button
2. Press the SELF-TIMER button until the desired
mode indicator displays on the LCD monitor.
A 10 second, 2 second or double self-timer icon
appears on the LCD monitor. In Movie Clip mode,
only the 10-second self-timer will work.
- When you press the MENU button, a menu related to each camera mode will
be displayed on the LCD monitor. Pressing it again will return the LCD to the
initial display.
- A menu option can be displayed for MOVIE CLIP and STILL IMAGE.
There is no menu available when the VOICE RECORDING mode is selected.
•10SEC self-timer (
)
: Pressing the shutter button will allow an interval
of 10 seconds before the image is taken.
•2SEC self-timer (
)
SIZE
[Selecting the 10 SEC self-timer]
: Pressing the shutter button will allow an interval
of 2 seconds before the image is taken.
3264X2448
3264X2176
3264X1824
2592X1944
•Double self-timer (
)
2048X1536
Pressing the MENU button
: A picture will be taken after about 10 seconds and 2 seconds later a
second picture will be taken. When using the flash, the 2-second self-timer
may be delayed for longer than 2 seconds depending on the flash charge
time.
1024X768
[Menu off]
[Menu on]
■ OK button
3. When you press the SHUTTER button, the picture will be taken after the
specified time has elapsed.
- When the menu is displayed on the LCD monitor, this button is used for shifting
the cursor to the sub menu or for confirming data.
《26》
Download from Www.Somanuals.com. All Manuals Search And Download.
E (Effect) button
Special Effect : Colour
■ It is possible to add special effects to your images by using this button.
■ Still image mode : You can select the colour, outfocus, composite and frame
menus.
■ By using the camera’s digital processor, it is possible to add special effects to
your images
1. Press the E button in any recording mode.
■ Movie clip mode : You can select the colour and stabiliser menus.
■ Available Effects, by recording mode (O : Selectable X : Not selectable)
2. Select the
menu tab by pressing the Left/ Right button.
O
X
X
X
O
O
X
X
X
X
O
O
O
O
X
O
O
O
O
X
O
O
O
O
X
O
O
O
O
X
O
X
X
X
X
O
X
X
X
X
O
X
X
X
X
O
X
X
X
X
Normal
Normal
[Still image mode]
[Movie clip mode]
3. Select a desired sub menu by pressing the Up/ Down button and press the
OK button.
INFORMATION
: No effect is added to the image
● This button will not operate in the ASR, Voice recording and some scene
: Captured images will be stored in black and white.
: Captured images will be stored in a sepia tone
(a gradient of yellowish brown colours).
modes (Night, Text, Sunset, Dawn, Backlight, Firework, Beach & Snow).
● When
selected.
or
is selected, only
menu of the Effect menus can be
: Captured images will be stored in a blue tone.
: Captured images will be stored in a red tone.
: Captured images will be stored in a green tone.
: Save the image in negative mode.
● If a special effect is selected, any previously selected special effects (preset
focus frames; composite shooting; photo frame) are cancelled
automatically.
● Even if the camera is turned off, the special effect setting will be preserved.
4. Press the shutter button to capture an image.
To cancel the special effect, select the
sub menu in the Colour menu
and select the sub menu in the rest special effect menu.
《27》
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Effect : Preset focus frames
■ You can make the subject stand out from its
surroundings. The subject will be sharp and in focus
while making the rest out of focus.
● Moving and changing the focus frame
You can change the focus frame after selecting a Range menu.
1. Point the camera towards the subject and compose the image by using the
LCD monitor.
1. Press the E button in the available camera
modes(Not available: Movie clip, Voice, Auto,
2. Press the +/ - button.
HighLight
Manual, ASR, Scene).
3. The colour of focus frame turns white. Press the Up/ Down/ Left/ Right button
to move the focus frame position.
2. Select the
menu tab by pressing the Left / Right button.
3. Select a desired sub menu by pressing the Up / Down button and press the
OK button.
4. To select the focus frame position, press the +/ - button again and you can
take a picture.
Pressing the +/ - button
HighLight
HighLight
HighLight
HighLight
ꢂ
ꢁꢀ
ꢃ
Capture:SH
Edit:+/-
Capture:SH
Move :
[Range 1]
[Range 2]
[Range 3]
[Range 3]
[The frame is activated]
4. The preset focus frame will appear.
Press the shutter button to capture an image
Pressing the Up/ Down/
Left/ Right button
Capture:SH
Edit:+/-
Pressing the +/ - button
ꢂ
ꢁꢀ
ꢃ
Capture:SH
Edit:+/-
Capture:SH
Move :
[After changing the frame
position]
《28》
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Effect : Composite shooting
■ You can combine 2 - 4 different shots in a still image
1. Press the E button in the available camera
modes(Not available: Movie clip, Voice, Auto,
Manual, ASR, Scene).
INFORMATION
● You can use the flash button, self-timer button, macro button, voice memo
button and the Zoom W / T button during the composite shooting.
● If you press the Play mode button or press the Voice recording button twice
during the composite shots, each camera working mode is executed.
The images captured before will be deleted.
2. Select the
button.
menu by pressing the Left/ Right
Composite
3. Select a desired sub menu by pressing the Up/ Down button and press the
OK button.
● After taking the last composite shooting, press the OK button. And then the
voice memo will start.
-
-
-
-
-
: cancels the composite shooting
: 2 different shots are combined in a still image.
: 3 different shots are combined in a still image.
: 4 different shots are combined in a still image.
: 2 different panorama shots are combined in a still image.
● Changing a part of composite shot before taking the last shot
Before taking the last composite shot, you can change a part of composite shot.
1. During the composite shots, press the +/ - button.
4. The number of frames you selected in step 3 is displayed on the LCD monitor.
Press the shutter button to start the composite shooting
2. A previous image will be deleted and new frame will display.
If there is an image taken before, press the +/ - button again and a previous
image will be deleted again.
※ Selecting 2 composite shooting
Pressing the
shutter button
Pressing the
shutter button
Pressing the
OK button
Capture:SH
Del
:
+/-
Save : OK
Del : +/-
Pressing the +/ - button
[Ready for taking]
[First shot]
[Second shot]
[The final picture]
Capture:SH
Del:+/-
Capture:SH
Del:+/-
[Before taking the 3rd shot]
[Moving backward to the 2nd
shot]
5. To save the composite shots, press the OK button after taking the last shot.
3. Press the shutter button to capture a new image.
《29》
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Effect : Composite shooting
Special Effect : Photo Frame
● Changing a part of composite shot after taking the last shot
1. After taking the last shot , a cursor to select a frame will display. Press the Up/
Down/ Left/ Right button to select the frame.
■You can add 9 types of frame-like borders to a still image you want to capture.
■Date & Time information will not be printed on the stored image taken with Photo
Frame menu.
2. Press the +/ - button and an image will be deleted. Composite frame will be
activated.
1. Press the E button in the available camera
modes(Not available: Movie clip, Voice, Auto,
Manual, ASR, Scene).
3. Press the Shutter button. You can take other images again by using the Up/
Down/ Left/ Right button and +/ - button.
2. Select the
button.
3. Select a desired sub menu by pressing the Up/
Down button and press the OK button.
menu by pressing the Left/ Right
4. Press the OK button again to save the captured image.
Photo Frame
-
: The photo frame will not be added.
Pressing the
Up button
Save : OK
Del : +/-
Save : OK
Del : +/-
[After taking the 4th shot]
[Moving backward to the 2nd shot]
Pressing the
+ / - button
Pressing the
Shutter button.
[Deleting the 2nd shot]
Pressing the OK
button
Save : OK
Del : +/-
[After taking the 2nd shot again]
[The final picture]
《30》
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Effect : Photo Frame
+/ - button
4. The photo frame will appear.
■ You can use the +/ - button to adjust the values for the RGB, ISO, white balance
Press the shutter button to capture an image
and exposure compensation.
Main menu
RGB
Sub menu
Available camera mode
R (Red), G (Green), B (Blue)
ISO
AUTO, 50, 100, 200, 400, 800, 1600
Movie Clip frame stabiliser
AUTO, DAYLIGHT, CLOUDY,
FLUORESCENT H,
■ This function helps stabilise images captured during movie recording.
WHITE
You can select this menu only in the MOVIE CLIP mode.
FLUORESCENT L, TUNGSTEN,
CUSTOM.
BALANCE
1. Press the E button in the Movie clip mode.
2. Press the Left/ Right buttons to select the
stabilizer menu tab.
Exposure
-2.0-0.0-+2.0 (0.5EV steps)
3. Select a desired sub menu by pressing the UP/
DOWN button and press the OK button.
compensation
Stabilizer
-
: Movie clip frame stabiliser function
becomes disabled.
-
: Reduces camera shake during movie recording.
The recording frame range will become narrower than when you
select the menu. Pre-view frames may not display smoothly on
the LCD monitor.
※ If the memory card is not inserted, this function will not operate.
《31》
Download from Www.Somanuals.com. All Manuals Search And Download.
+/ - button
■ RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of
■ ISO : You can select the ISO sensitivity when taking pictures.
the images to be captured.
The speed or specific light-sensitivity of a camera is rated by ISO numbers.
● Setting RGB Values
● Selecting an ISO Sensitivity
1. Press the +/ - button, and then use the UP and
1. Press the +/ - button, and then use the UP and
DOWN buttons to select the RGB icon (
The RGB menu bar will appear as shown.
).
DOWN buttons to select the ISO icon(
The ISO menu bar will appear as shown.
).
2. Use the UP/ DOWN/ LEFT and RIGHT buttons
to select the desired RGB value.
2. Use the LEFT and RIGHT buttons to select the
desired ISO sensitivity value.
- Up/ Down Button : Navigates between R, G,
and B icons.
- AUTO
: The camera's sensitivity is automatically
- Left/ Right Button : Changes value of each icon.
3. When you press the +/ - button again, the value you set will be saved and
RGB setup mode will end.
changed by variables such as lighting value or subject brightness.
- 50, 100, 200, 400, 800, 1600
: You can increase the shutter speed while the same amount of light is
present, by increasing the ISO sensitivity. However, the image may be
saturated in high luminance. The higher the ISO value, the higher the
camera’s sensitivity to light is and therefore the greater its capacity to take
pictures in dark conditions. However, the noise level in the image will
increase as the ISO value increases, making the image appear coarse.
3. When you press the +/ - button again, the value you set will be saved and ISO
setup mode will end.
※ When special effect (colour) from the icon other than
is selected, it will
not be able to select the RGB.
《32》
Download from Www.Somanuals.com. All Manuals Search And Download.
+/ - button
■ White balance : The white balance control allows you to adjust the colours to
● Using the Custom White Balance
appear more natural.
White balance settings may vary slightly depending on the shooting
environment. You can select the most appropriate white balance setting for a
given shooting environment by setting up the custom white balance.
● Selecting a White Balance
1. Press the +/ - button, and then use the UP and
DOWN buttons to select the white balance icon
1. Select the CUSTOM (
Balance.
) menu of the White
(
). The white balance menu bar will appear
as shown.
2. Place a sheet of white paper in front of the
camera so that the LCD monitor shows only
white, and then press the SHUTTER button.
3. Your custom white balance value is stored.
- The custom white balance value will be applied,
starting with the next picture you take.
2. Use the LEFT and RIGHT buttons to set the white
balance to the desired value. The value you set wil
be displayed on the LCD monitor.
Measure:Shutter
AUTO
: The camera automatically selects the appropriate white
balance settings, depending on the prevailing lighting
conditions.
- The user configured white balance will be
remain effective until it is overwritten.
DAYLIGHT
CLOUDY
: For taking images outside.
: For taking images under a cloudy and overcast sky.
: For shooting under daylight fluorescent types of three-
way fluorescent lighting.
Fluorescent H
ꢂ
[White paper]
Fluorescent L
TUNGSTEN
: Shooting under white fluorescent lighting.
: For shooting under tungsten (standard light bulb)
lighting.
CUSTOM
: Allows the user to set the white balance according to
the shooting condition.
Different lighting conditions may cause a colour cast on your images.
3. Press the +/ - button again. The value you set will be saved and White
Balance setup mode will end.
《33》
Download from Www.Somanuals.com. All Manuals Search And Download.
+ / - button
Using the LCD monitor to set the camera settings
■ Exposure compensation : This camera automatically adjusts the exposure
according to the ambient lighting conditions.
You can also select the exposure value by using the
+ / - button.
■ You can use the menu on the LCD monitor to set up recording functions. In any
mode with the exception of VOICE RECORDING mode, pressing the MENU
button displays the menu on the LCD monitor.
※
The menu will not be displayed on the LCD monitor in the following circumstances:
- When another button is being operated.
● Compensating Exposure
1. Press the + / - button, and then use the UP and
DOWN buttons to select the exposure
- While image data is being processed.
- When there is no battery capacity.
compensation icon (
).
The exposure compensation menu bar will appear
■
The following functions are available, depending on the mode you have selected.
as shown.
The items indicated by
are default settings.
2. Use the LEFT and RIGHT buttons to set the desired exposure compensation
factor.
Menu tab Main menu
Sub menu
Camera working mode Page
p.36
3. Press the + / - button again. The value you set will be saved and the Exposure
Compensation setup mode will close.
3264X2448 3264X2176
3264x1824 2592X1944
2048X1536 1024X768
SIZE
If you change the exposure value, the exposure indicator (
displayed on the bottom of the LCD monitor.
) will be
(Still image)
※ A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the exposure
and the LCD monitor will appear white or you may not get good pictures.
800X592
640X480
Super Fine
Normal
720X480
SIZE
p.36
p.36
p.36
(Movie)
320X240
Fine
QUALITY
-
*30 FPS
15 FPS
20 FPS
-
FRAME
RATE
TIME
1S
p.38
p.37
p.37
METERING
AUTO FOCUS
Multi
Spot
Multi AF
Center AF
《34》
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the LCD monitor to set the camera settings
How to use the menu
1. Turn on the camera and press the MENU button. A menu for each camera
mode appears. However, there is no menu for Voice Recording mode (
2. Use the LEFT and RIGHT buttons to navigate through the menus.
Menu tab Main menu
Sub menu
Camera working mode Page
).
Single
Continuous
SHOOTING Motion Capture
Interval
AEB
p.38
-
Soft
SHARPNESS
Vivid
Normal
Press the
LEFT or
Press the
LEFT or
SIZE
3264X2448
QUALITY
Super Fine
METERING
p.39
p.39
Multi
Spot
-
Basic
-
Fine
3264X2176
3264X1824
2592X1944
2048X1536
1024X768
RIGHT button.
RIGHT button.
Normal
Full
OSD
INFORMATION
LCD Save
3. Use the UP and DOWN buttons to select a sub menu.
※ * 30 FPS cannot be used in 800X592, 720X480 size.
※ Menus are subject to change without prior notice.
Press the UP
or DOWN
button.
Press the UP
SIZE
3264X2448
SIZE
3264X2448
SIZE
3264X2448
3264X2176
3264X1824
2592X1944
2048X1536
1024X768
or DOWN
button.
3264X2176
3264X1824
2592X1944
2048X1536
1024X768
3264X2176
3264X1824
2592X1944
2048X1536
1024X768
4. Select a sub menu, and then the value you set will be saved.
Press the MENU button and the menu will disappear.
《35》
Download from Www.Somanuals.com. All Manuals Search And Download.
Size
Quality/ Frame rate
■ You can select the image size appropriate for your application.
■You can select the compression ratio appropriate for your application of the
captured images. The higher the compression ratio, the lower the picture quality.
Mode
Normal
Print angle Wide angle
Mode
Icon
STILL IMAGE mode
MOVIE CLIP mode
Icon
Still
image
mode
3264X
2448
2592X
1944
2048X
1536
3264X
1824
1024X
768
3264X
2176
Size
Sub menu Super Fine
File Format jpeg
Fine
jpeg
Normal
jpeg
30FPS
avi
20FPS
avi
15FPS
avi
Icon
Size
Movie clip
mode
800X592
720X480
640X480
320X240
QUALITY
FRAME RATE
Super Fine
Fine
30 FPS
20 FPS
15 FPS
Normal
SIZE
SIZE
3264X2448
3264X2176
3264X1824
2592X1944
2048X1536
1024X768
800X592
720X480
640X480
320X240
[ STILL IMAGE mode ]
[ MOVIE CLIP mode ]
[STILL IMAGE mode]
[MOVIE CLIP mode]
INFORMATION
● This file format complies with the DCF (Design rule for Camera File system).
● JPEG (Joint Photographic Experts Group) : JPEG is the image
compression standard developed by the Joint Photographic Experts Group.
This type of compression is most commonly used for compressing photos
and graphics because it can compress the files efficiently.
INFORMATION
●The higher the resolution, the lower the number of shots available because
high resolution images require more memory.
《36》
Download from Www.Somanuals.com. All Manuals Search And Download.
Metering
Auto Focus type
■ If you cannot obtain suitable exposure conditions, you can change the metering
■ You can select your preferred Auto Focus type according to the shooting condition.
method to take brighter pictures.
- [Multi AF] : This camera selects a AF point from
AUTO FOCUS
[Multi] : Exposure will be calculated based on an
the 5 AF points.
Multi AF
METERING
Center AF
average of the available light in the image
- [Center AF] : The rectangular area in the center of
Multi
Spot
area. However, the calculation will be biased
the LCD monitor will be focused
towards the centre of the image area.
This is suitable for general use.
[ PROGRAM mode ]
[Spot] : Only the rectangular area in the centre of
[ PROGRAM mode ]
the LCD monitor will be metered for light.
This is suitable when the subject in the
centre is exposed correctly, regardless of the back lighting.
※ If the subject is not the centre of the focus area, do not use the spot metering
as this may result in an exposure error. In this circumstance, it is better to use
exposure compensation.
[Multi AF]
[Center AF]
※ When the camera focuses on the subject, the auto focus frame turns too green.
When the camera doesn’t focus on the subject, the auto focus frame turns to
red.
《37》
Download from Www.Somanuals.com. All Manuals Search And Download.
Continuous shot
■ You can select continuous shot, and AEB (Auto Exposure Bracketing).
INFORMATION
●High resolution and picture quality increases file saving time, which
increases stand-by time.
- [Single]
: Take one picture only
: Images will be taken
continuously until the shutter
button is released. The shooting
capacity depends on the
memory.
SHOOTING
- [Continuous]
Single
●If the [Continuous], [Motion capture] or [AEB] sub menu is selected, the flash
will be off automatically.
Continuous
Motion Capture
AEB
Interval
01 min
●If less than 3 pictures are available in the memory, the AEB shooting is not
available.
02 Pic
[ PROGRAM mode ]
●It is best to use a tripod for the AEB shooting as the time to save each image
file is longer and blurring caused by camera shake may occur.
- [Motion Capture] : This takes 30 shots per second,
when the shutter is pressed and
held down. After completing the continuous shooting,
images are saved and the images play back on the Rear
LCD. The maximum number of shots is 30 and the image
size is fixed as 640X480.
- [AEB]
: Take three pictures in a series in different exposures: short
exposure (-0.5EV), standard exposure (0.0EV) and over
exposure (+0.5EV). Use the mode if it is hard to decide
exposure of the object.
- [Interval]
: You can take images with interval and number of images
set before.
Left / Right button : Selecting the Interval menu or Number
of image menu.
Up / Down button : Changing the numbers
(01 min-60 min / 02 pics-99 pics).
* After taking the first picture, the LCD monitor turns off.
After completing the Interval shot, the interval shot is
canceled.
* Before using the Interval shot, charge the battery fully.
If the battery is out during the shots, the last taken before
the camera was turned off.
《38》
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharpness
OSD (On Screen Display) information
■ You can adjust the sharpness of the picture you
want to take. You cannot check the sharpness effect
on the LCD monitor before you take a picture,
because this function is applied only when the
captured image is stored on the memory.
■ In any mode with the exception of VOICE
SHARPNESS
OSD INFORMATION
RECORDING mode, you can check the recording
Soft
Normal
Vivid
Full
Basic
status in the LCD monitor.
LCD Save
[ PROGRAM mode ]
Sub menu
Soft
Icon
Description
The edges of the image are softened.
This effect is suitable for editing images on your PC.
The edges of the image are sharp.
This is suitable for printing.
[Full information]
[Basic information]
Normal
Vivid
The edges of the image are emphasized. The edges
will appear sharp, but noise may occur in the
recorded image.
《39》
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting play mode
■If the memory card is inserted in the camera, all the camera functions apply only
INFORMATION
to the memory card.
●Manner mode : Pressing the play mode button for more than 3 seconds
changes the buzzer and start-up sound setting to OFF, even
though you may have set these to ON.
■If the memory card is not inserted in the camera, all the camera functions apply
only to the internal memory.
●Lightly press the shutter button in Play mode to switch to the currently set
shooting mode.
■If you have turned on the camera by pressing the POWER button, you can press
the PLAY MODE button once to switch to Play mode and press it again to switch
to Recording mode.
■You can turn the power on with the play mode button. The camera is turned on in
play mode. Press the play mode button again and the camera will be turned off.
● Playing back a movie clip
■You can set up the PLAY mode function by using the camera buttons and LCD
Steps from 1-2 are the same as those to play back
a still image.
monitor.
3. Select the recorded movie clip and press the
Play & Pause button to play back.
● Playing back a still image
1. Select the PLAY mode by pressing the
Play:ꢀ/
- To pause a movie clip file while playing it back,
play mode button (
).
press the play & pause button again.
- Pressing the play & pause button again will
cause the movie clip file restart.
2. The last image stored on the memory is
displayed on the LCD monitor.
- To rewind the movie clip while it is playing,
press the LEFT button. To fast forward the
movie clip, press the RIGHT button.
- To stop playback of the movie clip, press the
play & pause button, and then press the LEFT
or RIGHT button.
3. Select an image that you want to play
back by pressing the LEFT/ RIGHT
button.
※ Press and hold the Left or Right button to
fast forward the images played.
《40》
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting play mode
■Movie clip capture function : capture still images from the movie clip.
■ On camera movie trimming : You can extract desired frames of movie clip during
the movie clip play back.
● If the running time is under 10 seconds, the movie
clip can’t be trimmed.
● How to capture the movie clip
Steps 1-3 are the same as those for playing back
a movie clip.
1. Press the Pause button at the point of the movie
clip that you want to start extracting.
4. Press the Play / Pause button while playing the
movie clip. Then press the E button.
MARK IN:OK
Capture:E
2. Press the OK button. (The start point doesn't
display on the status bar, but the start point will be
marked.)
00:00:05
MARK IN:OK
Capture:E
5. The paused movie clip is saved in a new file
00:00:05
name.
[Paused]
3. The movie plays back again and the extracted
range will be displayed on the status bar.
4. Press the Play & Pause button once more at the
point where you wish the extracted file to stop.
5. Press the OK button and a confirmation window
will display.
※ The captured movie clip file has same size as
the original movie clip (800X592, 720X480,
640X480, 320X240)
Playꢀ:
/
OK:Trim
00:00:10
[Pressing the E button]
6. Select a desired sub menu by pressing the Left/
Right button and press the OK button.
[Yes] : The extracted frames are saved as a new
file name.
Trimming?
Yes
No
Confirm : OK
[No] : The movie trimming will cancel.
INFORMATION
●If the time line bar passes by the start point by pressing the REW (Left)
button, the first frame of the movie clip will display.
●If you don’t specify the ending point of the movie clip, the trimming
confirmation window will display at the point of the last frame.
《41》
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting play mode
LCD monitor Indicator
● Playing back a recorded voice
■ The LCD monitor displays shooting information about the displayed image.
Steps from 1-2 are the same as those to play
back a still image.
3. Select the recorded voice file and press the
Play & Pause button to play back a recorded
voice file.
⑫
①
②
100-0007
PLAY:
ꢀ
- To pause a recorded voice file, while playing
it back, press the play & pause button again.
③
④
⑤
Av:F2.8
Tv:1/30s
⑪
⑩
⑨
⑧
⑦
⑥
- To resume playback of the voice file, press the play & pause button.
- To rewind the voice file while it is playing, press the LEFT button.
To fast forward the voice file, press the RIGHT button.
ISO:50
Flash:ON
3264X2448
2007/01/01
- To stop playback of the voice file, press the play & pause button, and then
press the LEFT or RIGHT button.
No.
1
Description
Play mode icon
Battery
Icon
Page
-
2
p.10
p.21
p.53
p.55
p.63
p.36
p.24
p.32
p.15
p.14
p.62
3
Voice Memo
Protect
4
5
DPOF
6
Recording date
Image size
Flash
2007/01/01
3264X2448 - 256X192
ON/ OFF
7
8
9
ISO
50 - 1600
10
11
12
Shutter speed
Aperture value
15 - 1/2000
F2.8 - F4.4
Folder name & File name
100-0007
《42》
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the camera buttons to set the camera
Thumbnail(
)/ Enlargement (
) button
■In Play mode, you can use the buttons on the camera to conveniently set up the
● Image enlargement
Play mode functions.
1. Select an image that you want to enlarge and
press the enlargement button.
2. Different parts of the image can be viewed by
pressing the 5 function button.
Thumbnail (
)/ Enlargement (
) button
3. Pressing the thumbnail button will zoom back to
the original full sized image.
●You can view multiple pictures, enlarge a selected picture, and crop and save a
selected area of an image.
- You can tell whether the image displayed is an
enlarged view by checking the image
enlargement indicator shown at the top left of
the LCD monitor. (If the image is not an
●Thumbnail display
1. While an image is displayed on full screen, press the
thumbnail button.
2. The thumbnail display will highlight the image that
had been showing at the time the thumbnail mode
was selected.
enlarged view, the indicator will not be displayed.) You can also check the
area of enlargement.
- Movie clips and WAV files can’t be enlarged.
- If an image is enlarged, a loss of quality may occur.
3. Press the 5 function button to move to a desired
image.
4. To view an image separately, press the enlargement
button.
Pressing the thumbnail
button (
)
Pressing the enlargement
button (
)
Highlighted image
[ Normal display mode ]
[ Thumbnail display mode ]
《43》
Download from Www.Somanuals.com. All Manuals Search And Download.
Thumbnail (
)/ Enlargement (
) button
Voice ( ) memo/ Up button
●The maximum enlargement rate in proportion to the image size.
■When the menu is displayed on the LCD monitor, pressing the UP button makes
the menu cursor move up.
Image size
8M
7MP
6MW
X9.5
5M
3M
X8.0
1M
■When the menu is not displayed on the LCD monitor, the UP button operates as
the voice memo button. You can add your voice to a stored still image.
Maximum enlargement rate
X12.0
X11.3
X9.0
X4.0
●Adding a Voice Memo to a Still Image
●Trimming : You can extract part of the image that you
1. Press the LEFT/ RIGHT button to select an
image that you wish to add sound to.
want and save it separately.
Trimming?
Yes No
Confirm : OK
1. Select an image that you want to enlarge and
press the enlargement button. Press the Menu
button and a message will be displayed.
2. Press the voice memo button ( ) and the voice
memo indicator will display. The camera is now
ready to record a voice memo.
Record:Shutter
00:00:00
2. Select a desired sub menu by pressing the
Left/ Right button and press the OK button.
3. Press the shutter button to start recording and
voice will be recorded to the still image for 10
seconds. While the voice is recording, the
recording status window will be displayed as
[Yes] : The trimmed image will save as a new file name, and display on the
LCD monitor.
[No] : The trimming menu will disappear.
shown alongside.
Stop:Shutter
00:00:05
※ If there is little memory space to save the trimmed image, the image can’t be
4. The recording can be stopped by pressing the
trimmed.
shutter button again.
※ To delete the enlarged image during the trimming function, press the delete
button.
5. The (
) icon will be displayed on the LCD
monitor after voice memo recording has finished.
- Voice memos can’t be recorded onto movie clip
and voice recording files.
- A distance of 40cm between you and the
camera (microphone) is the best distance to
record sound.
- The voice memo will be saved in ꢀ.wav format, but has the same file name
as the still image to which it corresponds.
- If you add a new voice memo to the still image that already has a voice
memo, the existing voice memo will be erased.
《44》
Download from Www.Somanuals.com. All Manuals Search And Download.
Play & Pause (
)/ Down button
E (Effect) button
■In Play mode, the play & pause/ down button works as follows:
- If the menu is displayed
■ It is possible to add special effects to your images by using this button.
1. Select a still image or movie clip and press
the E button.
Press the DOWN button to move from the main menu to a sub menu, or to
move down the sub menu cursor.
2. Select a desired sub menu and press the
OK button.
- If a still image with a voice memo, a voice file, or a movie clip is playing
In Stop mode
: Plays a still image with a voice memo, a voice file, or a
movie clip.
Exit:E
: Captured images will be stored in
During playback : Temporarily stops playback.
In Pause mode : Resumes playback
black and white.
: Captured images will be stored in a sepia tone
(a gradient of yellowish brown colours).
: Captured images will be stored in a blue tone.
: Captured images will be stored in a red tone.
: Captured images will be stored in a green tone.
: Save the image in negative mode.
PLAY:ꢀ
STOP : Shutter
PAUSE:ꢀ
EXIT:OK
PLAY:ꢀ
REWꢁ
ꢀFF
[Voice recording is stopped]
[Voice recording is playing]
[Voice recording is paused]
※ The changed image is saved in a new file name.
《45》
Download from Www.Somanuals.com. All Manuals Search And Download.
Delete ( ) button
■This deletes images stored on the memory.
●Deleting Images in Thumbnail Display Mode
1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you want
●Deleting Images in Play Mode
to delete, and then press the DELETE (
) button.
1. Select an image that you want to delete by
pressing the LEFT/ RIGHT button and press the
2. A message will display on the LCD monitor as shown below.
3. Select the sub menu values by pressing the LEFT/ RIGHT button and then
press the OK button.
DELETE(
) button.
If [Yes] is selected : deletes the selected images.
If [No] is selected : cancels "Delete Image".
2. A message will display as shown alongside on
the LCD monitor.
Press the
Delete?
delete button.
Delete?
Yes
3. Select the sub menu values by pressing the LEFT/
RIGHT button and then press the OK button.
If [Yes] is selected : deletes the selected images.
If [No] is selected : cancels "Delete Image".
Yes
No
No
Confirm : OK
Confirm : OK
INFORMATION
●Before deleting images from the camera, you should protect or download
images to your computer that you wish to keep.
《46》
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer button
Left/ Right/ Menu/ OK button
■ If you select [Computer] sub menu in the [USB]
setup menu, [Connecting Computer] message will
display when you connect the camera to your
printer and the connection will not be established.
In this case, press the Printer button. [Connecting
Printer] message will display and the Easy printing
mode will be selected.
■ LEFT/ RIGHT/ MENU/ OK buttons activate the following.
- LEFT button : While the menu is showing, press the LEFT button to select
the menu tab to the left of the cursor. While the menu is not
showing, press the LEFT button to select the previous image.
- RIGHT button : While the menu is showing, press the RIGHT button to select
the menu tab to the right of the cursor, or to move to a
secondary menu. While the menu is not showing, press the
RIGHT button to select the next image.
* In some instances the camera may not connect to the printer, this will depend on
the manufacturer of the printer.
- MENU button : When you press the MENU button, the play mode menu will
be displayed on the LCD monitor. Pressing it again will return
the LCD to the initial display.
- After the connection, the Easy printing menu will
IMAGES
display on the LCD monitor.
- OK button
: When the menu is displayed on the LCD monitor, the OK
button is used for confirming data that is changed by using the
5 function button.
One Pic
All Pics
To display the PictBridge menu, press the Menu
button. For more information about the PictBridge
menu, refer to page 57.
ꢂ
Move:
ꢃ
《47》
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the play back function using the LCD monitor
■ PLAY mode functions can be changed by using the LCD monitor. In the PLAY
mode, pressing the MENU button displays the menu on the LCD monitor. The
menus you can set up in Play mode are as follows. To capture an image after
setting up the play menu, press the PLAY mode button or shutter button.
Menu tab Main menu
Sub menu
2592 X 1944
2048 X 1536
1024 X 768
3M P (2016 X 1344)
1M P (1032 X 688)
2M W (1920 X 1080)
1M W (1280 X 720)
User Image 1, 2
Select
Secondary menu
Page
-
-
-
-
-
-
-
-
Menu tab Main menu
Sub menu
Show
Secondary menu
Play/ Repeat Play
1, 3, 5, 10 sec
Off
Page
p.52
RESIZE
Interval
SLIDE
p.50
Effect
Music
Full
Off / Music 1,2,3
-
-
-
-
-
-
-
-
PROTECT
DELETE
p.53
p.53
Unlock/ Lock
All Pics
OSD
Basic
p.51
p.51
INFORMATION
Select
-
OSD Off
Right 90˚
Left 90˚
180˚
All Pics
-
No
-
COPY TO
CARD
p.54
p.55
p.56
Yes
-
ROTATE
Standard
Select/ All Pics/ Cancel
No/ Yes
Horizontal
Vertical
DPOF
Index
Size
Select/ All Pics/ Cance
《48》
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the play back function using the LCD monitor
■ This menu is available while the camera is connected to a PictBridge supporting
Menu tab Main menu
Sub menu
Type
Secondary menu
Page
printer (direct connection to the camera, sold separately) with a USB cable.
Auto
Menu tab Main menu
IMAGES
Sub menu
One Pic
All Pics
No
Secondary menu
Page
p.57
Plain
-
Photo
-
FastPhoto
-
-
Auto
AUTO SET
p.58
Yes
Draft
Quality
Auto
PostCard
Card
4X6
L
Normal
CUSTOM
SET
p.58
Fine
Auto
Date
Off
Size
On
2L
Auto
Letter
A4
File Name
Off
On
A3
Standard
Index
No
-
-
-
-
-
-
CUSTOM
SET
PRINT
DPOF PRINT
RESET
p.59
p.60
p.60
p.58
Auto
Full
1
Yes
2
No
4
Yes
Layout
8
※ Menus are subject to change without prior notice.
9
16
Index
《49》
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting the slide show
■ Images can be displayed continuously at pre-set intervals.
You can view the slide show by connecting the camera to an external monitor.
1. Press the play mode button and press the menu button.
● Configure slide show effects : Unique screen effects can be used for the slide
show.
1. Select the [Effect] sub menu by pressing the
2. Press the LEFT / RIGHT button and select the [SLIDE] menu tab.
UP/ DOWN button and press the RIGHT button.
SLIDE
Show
Interval
Effect
Music
Off
2. Use the Up/ Down button to select the type of
effect.
● Start the slide show : The slide show can start only in the [Show] menu.
Off : Normal display.
1. Use the Up/ Down buttons to select the [Show]
Back:ꢁ
Set:OK
: Image is displayed slowly.
: Image is displayed slowly from the centre
outwards.
menu and press the Right button.
SLIDE
Show
Interval
Effect
Music
Play
2. Select a desired sub menu by pressing the
Up/ Down button.
Repeat Play
: Image moves from the top left.
[Play] : The slide show is closed after one cycle.
[Repeat Play] : The slide show is repeated until
cancelled.
Back:ꢁ
Set:OK
: The image slides diagonally from top left to bottom right.
: The image slides irregularly.
3. Press the OK button and the slideshow will be
started.
3. Press the OK button to confirm the setting.
● Setting play interval : Set the slide show play interval.
1. Select the [Interval] sub menu by pressing the
UP/ DOWN button and press the RIGHT button.
2. Use the Up/ Down buttons to select the desired
interval.
● Setting B.G.M: Set the slide show music.
SLIDE
Show
Interval
Effect
Music
1 sec
3 sec
5 sec
10 sec
1. Select the [Music] sub menu by pressing the UP/
SLIDE
DOWN button and press the RIGHT button.
Show
Off
Interval
Music1
Music2
Music3
2. Use the Up/ Down buttons to select the desired
3. Press the OK button to save the configuration.
Effect
Back:ꢁ
Set:OK
Music.
Music
3. Press the OK button to save the configuration.
Back:ꢁ
Set:OK
INFORMATION
● The loading time depends on the image size and quality.
● While the slide show is playing, only the first frame of a MOVIE file is
displayed.
● While the slide show is playing, the voice recording file will not display.
《50》
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display information
Rotating an image
■ You can check shooting information about the displayed image.
■ You can rotate the stored images by various degrees. Once the playback of the
rotated picture is finished, it will switch back to the original state.
● How to select the type of information you want to see
1. Press the play mode button and press the menu
1. Press the play mode button and press the menu
ROTATE
OSD INFORMATION
button.
button.
Right 90˚
Full
Left 90˚
2. Press the LEFT/ RIGHT button and select the
Basic
OSD Off
2. Select the [OSD INFORMATION] menu tab by
pressing the LEFT/ RIGHT button.
3. Select a desired sub menu by pressing the UP/
DOWN button and press the OK button.
180˚
[ROTATE] menu tab.
Horizontal
Vertical
3. Select a desired sub menu by pressing the UP/
ꢂ
Move:
ꢃ
Exit:MENU
DOWN button.
100-0007
100-0007
Av:F2.8
Tv:1/30s
ISO:50
[Right 90˚] :
[Left 90˚] :
Rotate picture in a counter- Rotate picture 180
clock-wise direction degrees
[180˚] :
Flash:ON
3264X2448
2007/01/01
Rotate picture in a
clock-wise direction
[Full]
[Basic]
[OSD Off]
[Horizontal] :
Rotate picture horizontally
[Vertical] :
Rotate picture vertically
4. Press the OK button. The rotated image will be saved with a new file name
and the menu will disappear. If you display the rotated image on the LCD
monitor, empty spaces may appear to the left and right of the image.
《51》
Download from Www.Somanuals.com. All Manuals Search And Download.
Resize
■ Change the resolution (size) of pictures taken. Select the [User Image] to save
● A large sized image can be resized to a smaller sized image, but not vice versa.
● Only JPEG images can be resized. Movie clip (AVI), Voice recording (WAV) files
can’t be resized.
an image to be the start-up image. The resized image will have a new file name.
1. Press the play mode button and press the menu
● You can change the resolution of only those files compressed in the JPEG 4:2:2
format.
RESIZE
button.
2592X1944
2. Press the LEFT/ RIGHT button and select the
2048X1536
1024X768
● The resized image will have a new file name. The [User Image] image is stored
not on the memory card but on the internal memory.
[RESIZE] menu tab.
User Image1
User Image2
3. Select a desired sub menu by pressing the UP/
ꢂ
Move:
ꢃ
Exit:MENU
● Only two [User Image] images can be saved.
DOWN button and press the OK button.
● If the memory capacity is insufficient to store the resized image, a [Memory Full!]
message will display on the LCD monitor and the resized image will not be stored.
● Image Resize Types
2592X1944
2048X1536
1024X768
User Image 1,2
8M
5M
3M
1M
O
X
X
X
O
O
X
X
O
O
O
X
O
O
O
O
2016X1344
1032X688
User Image 1,2
7MP
O
1920X1080
O
O
1280X720
O
O
User Image 1,2
O
6MW
《52》
Download from Www.Somanuals.com. All Manuals Search And Download.
Protecting images
Deleting images
■ This is used to protect specific shots from being accidentally erased (Lock).
■ Of all the files stored in the memory card, the unprotected files in the DCIM
subfolder will be deleted. Remember that this will permanently delete
unprotected images. Important shots should be stored on a computer before
deletion takes place. The startup image is stored in the camera's internal
memory (i.e., not on the memory card) and it will not be deleted even if you
delete all files on the memory card.
It also unprotects images that have been previously protected (Unlock).
● Protecting Images
1. Press the play mode button and press the menu
PROTECT
button.
Select
All Pics
2. Press the LEFT/ RIGHT button and select the
[PROTECT] menu tab.
● Deleting images
3. Select a desired sub menu by pressing the UP/
ꢂ
Move:
ꢃ
Exit:MENU
1. Press the play mode button and press the menu
DOWN button and press the OK button.
[Select ] : Selection window for an image to be
protected/released is displayed.
DELETE
button.
Select
2. Press the LEFT/ RIGHT button and select the
All Pics
[Delete] menu tab.
- Up/ Down/ Left/ Right : Select an image
- Zoom W/ T Button : Protect/ release the image
3. Select a desired sub menu by pressing the UP/
ꢂ
Move:
ꢃ
Exit:MENU
DOWN button and press the OK button.
[Select] : Selection window for an image to delete
is displayed.
- OK button
: Your changes will be
saved and the menu will
disappear.
W
ꢁ
Unlock
Set:OK
ꢀT
- Up/ Down/ Left/ Right : Select an image
- Zoom T Button : Select the image for deletion.
[All Pics] : Protect/ release all saved images
- Zoom W/ T Button : Protect/ release the images
Select:T
Del:OK
(
mark)
- OK button
: Your changes will be saved
and the menu will
disappear.
W
ꢁ
Unlock
ꢀT
- OK Button : Press the OK button to display the
confirmation message. Select the
Set:OK
[Yes] menu and press the OK button
Delete?
to delete
marked images.
Yes
No
- If you protect an image, the protect icon will be
displayed on the LCD monitor. (An unprotected
image has no indicator)
[All Pics] : Displays confirmation window. Select
the [Yes] menu and press the OK
Confirm : OK
button to delete all unprotected images.
If there aren’t protected images, all the
- An image in LOCK mode will be protected from
the delete function or [Delete] functions, but will
NOT be protected from the [Format] function.
images are deleted and a [No Image!] message will display.
4. After deletion, the screen will be changed to the play mode screen.
《53》
Download from Www.Somanuals.com. All Manuals Search And Download.
Copy To Card
■ This enables you to copy image files, movie clips and voice recording files to the
memory card.
INFORMATION
● When this menu is selected without inserting a memory card, you can select
the [COPY TO CARD] menu but the menu can’t be run.
● Copying to the Memory Card
1. Press the play mode button and press the menu
● If there is not enough space available in the memory card to copy saved
images in the internal memory (20MB), the [COPY TO CARD] command
will copy only some of the images and display [Memory Full!] message.
Then the system will return to the playback mode. Please be sure to delete
any unnecessary files to free up space before inserting the memory card
into the camera.
COPY TO CARD
button.
No
Yes
2. Select the [COPY TO CARD] menu tab by
pressing the LEFT/ RIGHT button.
3. Select a desired sub menu by pressing the UP/
ꢂ
Move:
ꢃ
Exit:MENU
DOWN button and press the OK button.
- [No] : Cancels "Copy to Card".
● When you move the images that are stored in the internal memory by doing
[COPY TO CARD] to the card, the next number of file names will be created
in the card to avoid duplication of the file name.
- [Yes] : All images, movie clips and voice recording files saved in the internal
memory are copied to the memory card after the [Processing!]
message is displayed. After copying has been completed, the
screen will return to play mode.
- When the [Reset] of the [File] setup menu is set : The copied file names
start from after the last stored file name.
- When the [Series] of the [File] setup menu is set : The copied file names
start from after the last captured file name. After completing [COPY TO
CARD], the last stored image of the last copied folder is displayed on the
LCD monitor.
《54》
Download from Www.Somanuals.com. All Manuals Search And Download.
DPOF
DPOF : Standard
■DPOF(Digital Print Order Format) allows you to embed printing information on
your memory card’s MISC folder. Select the pictures to be printed and how many
prints to make.
■ This function allows you to embed printing quantity information on a stored
image.
1. Press the play mode button and press the menu
DPOF
button.
Standard
Index
Select
All Pics
Cancel
■The DPOF indicator will display on the LCD monitor when an image that has
DPOF information plays back. Images can then be printed on DPOF printers, or
at an increasing number of photo labs.
2. Press the LEFT/ RIGHT button and select the
[DPOF] menu tab.
Size
3. Select the [Standard] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/
DOWN button and press the OK button.
[Select] : Selection window for an image to print is
displayed.
Back:ꢁ
Set:OK
■This function is not available for Movie clips and Voice recording files.
■When the wide angle image is printed as a wide angle print, 8% of the left and
right side of the image may not be printed. Check that your printer can support
the wide angle image when you print the image. When you print the image at a
photo lab, request that the image is printed as a wide angle image. (Some photo
labs may not support the wide angle size print.)
W
ꢁ
0 Prints
Set:OK
ꢀT
- Up/ Down/ Left/ Right : Select an image to print.
- Zoom W/ T Button
: Select the number of
prints.
[All Pics] : Configure number of prints for all
pictures except movie and voice files.
W
ꢁ
0 Prints
ꢀT
- W/ T button : Select a number of prints
[Cancel] : Cancel the print setup.
Set:OK
5. Press the OK button to confirm the setting.
If an image carries DPOF instructions, the DPOF
indicator (
) will show.
《55》
Download from Www.Somanuals.com. All Manuals Search And Download.
DPOF : Index
DPOF : Print size
■ Images (except for movie clips and voice file) are printed as index type.
■ You can specify the print size when printing images stored on the memory card.
The [Size] menu is available only for DPOF 1.1 compatible printers.
1. Press the play mode button and press the menu
● Setting the Print Size
DPOF
button.
1. Press the play mode button and press the menu
Standard
Index
No
DPOF
2. Press the LEFT/ RIGHT button and select the
[DPOF] menu tab.
Yes
button.
Size
Standard
Index
Select
All Pics
Cancel
2. Press the LEFT/ RIGHT button and select the
[DPOF] menu tab.
Size
3. Select the [Index] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/
DOWN button.
Back:ꢁ
Set:OK
3. Select the [Size] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/
DOWN button and press the OK button.
[Select] : Selection window for an image to be
changed printed size is displayed.
Back:ꢁ
Set:OK
If [No] is selected : Cancel the index print setting.
If [Yes] is selected : The image will be printed in index format.
5. Press the OK button to confirm the setting.
Wꢁ
Cancel
Set:OK
ꢀT
- Up/ Down/ Left/ Right : Select an image.
- Zoom W/ T Button
- OK button
: Change the print size.
: Your changes will be
saved and the menu will
disappear.
W
ꢁ
Cancel
ꢀT
[All Pics] : Change print size of all saved images.
- W/ T button : Select a print size
Set:OK
- OK button : Confirm the changed setting.
[Cancel] : Cancel all of the print size settings.
※ DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7, 8X10
INFORMATION
● Depending on the manufacturer and print model, cancelling the printing may
take a little longer for the printer to process.
《56》
Download from Www.Somanuals.com. All Manuals Search And Download.
PictBridge
PictBridge : Picture Selection
■ You can use the USB cable to connect this camera to a printer that supports
PictBridge (sold separately) and print the stored images directly. Movie clips and
voice files cannot be printed.
※ If you selected [Computer] in Step 4, when you connected the camera to your
printer, the [Connecting Computer] message will display and the connection will
not be established. In this case, disconnect the USB cable, and then follow the
procedure from Step 2 and onward. Or, press the Printer button and the camera
is connected to the printer displaying the [Connecting Printer] message. But, the
camera may not connect to the printer, depending on the manufacturer and
model of the printer.
● Setting up the camera for connection with the printer
1. In any mode with the exception of Voice Recording
SETUP
mode, press the MENU button.
AF Lamp
2. Press the LEFT/ RIGHT button and select
Sound
USB
Computer
Printer
[SETUP] menu tab.
LCD
■ Easy printing
Video Out
3. Select [USB] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select [Printer] menu by pressing the UP/ DOWN
button and press the OK button.
When you connect the camera to printer in the Play
back mode, you can print a picture easily.
Back:ꢁ
Set:OK
- Pressing the printer(
) button :
Currently displayed image will be printed with the
printer’s default setting.
Print:
Menu:OK
- Pressing the Left / Right button :
Selects a previous / next image.
■ Select pictures to print
1. Press the Menu button.
2. The [IMAGES] menu will appear.
3. Use the UP and DOWN buttons to select the
desired sub menu value, and then press the OK
button.
IMAGES
One Pic
All Pics
ꢂ
Move:
Set:OK
ꢃ
When [One Pic] is selected
: The PictBridge function will be applied only to the
picture currently displayed.
When [All Pics] is selected
: The PictBridge function will be applied to all pictures, excluding movie clips
and voice files.
《57》
Download from Www.Somanuals.com. All Manuals Search And Download.
PictBridge : Picture Selection
PictBridge : Print Setting
● Setting the Number of Copies to Print
■ AUTO SET
- Select [One Pic] or [All Pics]. A screen where you can set the number of copies
to print will appear as shown below.
1. Use the LEFT and RIGHT buttons to select the
[AUTO SET] menu tab.
AUTO SET
No
Yes
2. Use the UP and DOWN buttons to select the
desired sub menu value, and then press the OK
button.
ꢂ
Move:
ꢃ
W
ꢁ
0 prints
ꢀT
[No] : [CUSTOM SET] values are kept.
[Yes] : All values in the [CUSTOM SET] are
automatically changed.
W
ꢁ
0 prints
ꢀT
Set:OK
Exit:Shutter
Set:OK
Exit:Shutter
[When [One Pic] is selected]
[When [All Pics] is selected]
- Press the Up/ Down button to select the number of prints.
- When [One Pic] is selected : Use the Left/ Right button to select another
picture. After selecting another picture, select the number of prints for another
picture.
■ Custom Set : You can select the Paper Size, Print Format, Paper Type, Print
- After setting the number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting the number of
prints.
Quality, Date Print, and File Name Print menus for printed pictures.
1. Use the LEFT and RIGHT buttons to select the
CUSTOM SET
[CUSTOM SET] menu tab.
Size
Auto
Auto
Auto
Auto
Auto
Layout
Type
2. Use the UP and DOWN buttons to select the
desired sub menu value, and then press the
RIGHT button.
Quality
Date
ꢂ
Move :
ꢃ
3. Use the UP and DOWN buttons to select the
desired sub menu value, and then press the OK
button.
《58》
Download from Www.Somanuals.com. All Manuals Search And Download.
PictBridge : Print Setting
PictBridge : Printing
■ Printing Pictures
Menu
Sub menu
Function
1. Use the LEFT and RIGHT buttons to select the [PRINT] menu tab.
2. Use the UP and DOWN buttons to select the desired sub menu value, and
then press the OK button.
Setting the size of the printing
paper
Auto, PostCard, Card, 4x6, L, 2L,
Letter, A4, A3
Size
Setting the number of pictures to
be printed on a sheet of paper
Layout
Type
Auto, Full, 1, 2, 4, 8, 9, 16, Index
Auto, Plain, Photo, FastPhoto
Auto, Draft, Normal, Fine
[Standard] : Print the pictures stored in the
PRINT
memory card in set numbers.
Standard
Setting the quality of the printing
paper
Index
One picture is printed on one piece of
paper.
Setting the quality of the picture
to be printed
[Index]
: Print multiple images on one sheet of
paper.
ꢂ
Move:
ꢃ
Quality
Date
Setting whether to print the date Auto, Off, On
3. The screen shown on the right will appear and
the picture will be printed. If no picture is
selected, the [No Image!] message will be
displayed. Press the LEFT button while printing
to cancel the printing and the [PRINT] menu is
displayed.
Setting whether to print the file
Auto, Off, On
File Name
Now Printing
0001 / 0001
name
Exit:Shutter
※ Some menu options are not supported in all manufacturer and printer models.
If not supported, the menus are still displayed in the LCD, but are not selectable.
※ If the setting values are not changed in the automatic / manual setting, the
setting values are automatically kept.
※ Number of pictures in an index print varies
depending on the printer used.
《59》
Download from Www.Somanuals.com. All Manuals Search And Download.
PictBridge : DPOF Printing
PictBridge : Reset
■ DPOF Print : This allows you to directly print the files with DPOF information.
■ Initialises user-changed configurations.
1. Use the LEFT and RIGHT buttons to select the
1. Use the LEFT and RIGHT buttons to select the
[RESET] menu tab.
DPOF PRINT
RESET
[DPOF PRINT] menu tab.
No
No
2. Use the UP and DOWN buttons to select the
Yes
2. Use the UP and DOWN buttons to select the
desired sub menu value, and then press the OK
button.
Yes
desired sub menu value, and then press the
OK button.
ꢂ
Move:
ꢂ
Move:
ꢃ
ꢃ
[No] : Cancel the printing
[Yes] : Directly print the file with the DPOF
information.
If [No] is selected : Settings will not be reset.
If [Yes] is selected : All print and image settings
will be reset.
※ Depending on the manufacturer and printer model, some menus may not be
※ Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came with your
printer.
available.
When a printer does not support DPOF, the menu is still displayed but not
available.
《60》
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup menu
■In this mode, you can set up basic settings. You can use the setup menu in all
Menu tab Main menu
World Time
Sub menu
Bangkok, Jakarta
Beijing, Hong Kong
Seoul, Tokyo
Guam, Sydney
Off
Secondary menu
Page
p.64
camera modes, except Voice Recording mode.
New York, Miami
The items indicated by
are default settings.
Caracas, La Paz
Menu tab Main menu
Sub menu
Series
Secondary menu
Page
p.62
p.62
Buenos Aires
-
Mid-Atlantic
File
Reset
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Power Off
Off, 1, 3, 5, 10min
ENGLISH
-
p.64
p.64
Imprint
Date
FRANÇAIS
ITALIANO
P”CCK»…
DANSK
Date&Time
Off
DEUTSCH ESPAÑOL
AF Lamp
On
Language
p.62
PORTUGUÊS
SVENSKA
BAHASA
POLSKI
No
DUTCH
SUOMI
Off
Low
Sound
p.64
Medium
High
Magyar
-
Computer
Printer
Format
p.63
p.63
USB
LCD
p.65
p.65
Yes
-
07/01/01 13:00
-
Dark
yy/mm/dd
mm/dd/yy
dd/mm/yy
Off
-
Normal
Bright
Date&Time
-
-
NTSC
Video Out
Quick View
Reset
p.65
p.66
p.66
-
PAL
Cape Verde
London
Okhotsk
Off/ 0.5, 1, 3sec
No
Wellington, Auckland
Samoa, Midway
Honolulu, Hawaii
Alaska
Rome, Paris, Berlin
Athens, Helsinki
Moscow
Yes
World Time
p.64
※ Menus are subject to change without prior notice.
Abu Dhabi
Tashkent
LA, San Francisco
Denver, Phoenix
Chicago, Dallas
Almaty
《61》
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup menu
[ File name ]
[ Auto power off ]
■ This function allows the user to select the file naming format.
■ This function switches the camera off after a set amount of time in order to
prevent unnecessary battery drainage.
● Assigning File Names
● Sub menus
1. In any mode with the exception of Voice
[Off]
: The power off function will not
operate.
SETUP
Series
Reset
Recording mode, press the MENU button.
File
SETUP
2. Press the LEFT/ RIGHT button and select the
Power Off
File
Off
Language
Format
[1, 3, 5, 10 min] : The power will turn off
automatically if not used for the
Power Off
Language
Format
1 min
[SETUP] menu tab.
3 min
5 min
10 min
Date&Time
3. Select the [File ] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/
DOWN button and press the OK button.
Back:
ꢀ
Set:OK
Date&Time
period of time specified.
Back:ꢀ
Set:OK
- After replacing the battery, the power off setting will
be preserved.
- Note that the automatic power off function will not operate if the camera is in
PC mode, slide show, playing back a voice recording, playing back a movie clip
and taking a composite shot.
[Series] : New files are named using numbers that follow the previous
sequence, even when a new memory card is used, or after
formatting, or after deleting all pictures.
[Reset] : After using the reset function, the next file name will be set from
0001 even after formatting, deleting all or inserting a new memory
card.
5. Press the menu button twice and the menu will disappear.
[ Language ]
■ There is a choice of languages that can be displayed on the LCD monitor.
Even if the battery is removed and inserted again, the language setting will be
preserved.
- The first stored folder name is 100SSCAM, and the first file name is
SS850001.
- File names are assigned sequentially from SS850001 → SS850002 → ~ →
SS859999.
- LANGUAGE sub menu :
SETUP
English, Korean, French, German, Spanish,
- The folder number is assigned sequentially from 100 to 999 as follows:
100SSCAM → 101SSCAM → ~ → 999SSCAM.
- The files used with the memory card conform to the DCF (Design rule for
Camera File systems) format. If you change the image file name, the image
may not play back.
File
ENGLISH
한국어
Italian, S.Chinese, T.Chinese, Russian,
Portuguese, Dutch, Danish, Swedish, Finnish,
Thai, BAHASA(MALAY/ INDONESIAN), Arabic,
Czech, Polish, Hungarian and Turkish.
Power Off
Language
Format
FRANÇAIS
DEUTSCH
ESPAÑOL
Date&Time
Back:
ꢀ
Set:OK
《62》
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup menu
[ Formatting a memory ]
[ Setting up the Date/ Time/ Date type ]
■ This is used for formatting the memory. If you run [Format] on the memory, all
images, including the protected images, will be deleted. Be sure to download
important images to your PC before formatting the memory.
■ You can change the date and time that will be displayed on the captured images
and set up the date type.
● Setting Date/ Time & Selecting Date Format
● Sub menus
RIGHT button : Selects the year/ month/ day/
SETUP
[No] : The memory will not be formatted. Press the
hour/ minute date type.
Language
SETUP
▲
menu button three times and the menu
Format
07/01/01
▼
LEFT button : Moves the cursor to the
[Date&Time] main menu if the
Power Off
Date&Time
World Time
Imprint
Language
Format
No
display will disappear.
13:00
Yes
yy/mm/dd
[Yes] : A [Processing!] message appears and the
memory will be formatted. If you run
FORMAT in Play mode, a [No Image!]
message will appear.
Date&Time
World Time
cursor is at the first item of the
Back:ꢀ
Set:OK
Back:ꢀ
Set:OK
date and time setup. In all other
cases, the cursor will be shifted to
the left of its current position.
UP and DOWN buttons : Changes the setting value
- Date type : [yy/mm/dd], [mm/dd/yy], [dd/mm/yy], [Off]
Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card
- A memory card that has a file this camera can't recognise or one that has been
taken from another camera.
- Always format the memory card using this camera. If you insert a memory card
that has been formatted using other cameras, memory card readers, or PCs,
you will get a [Card Error!] message.
《63》
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup menu
[ World Time ]
[ Auto Focus lamp ]
■ This menu enables you to display the local date and time on the LCD monitor.
■ You can turn on and off the Auto Focus lamp.
● Sub menus
[Off] : The AF lamp will not light up in a low light
SETUP
SETUP
Seoul
SETUP
World Time
Imprint
Format
condition.
Tokyo
Off
On
Date&Time
World Time
Imprint
AF Lamp
Sound
[On] : The AF lamp will light up in a low light
condition.
Seoul, Tokyo
AF Lamp
2007/01/01 13:00
USB
Back:ꢀ
Set:OK
Back:ꢀ
Set:OK
Set:OK
[ Imprinting the recording date ]
■ There is an option to include DATE / TIME on still images.
[ Sound ]
■ If you set sound to ON, various sounds will be activated for camera startup,
when buttons are pressed, so that you can be aware of the camera operation
status.
● Sub menus
[Off]
: The DATE & TIME will not be
imprinted on the image file.
: Only the DATE will be imprinted on
the image file.
SETUP
SETUP
● [Sound] sub menu : Off/ Low/ Medium/ High
Date&Time
World Time
Imprint
Off
Imprint
AF Lamp
Sound
USB
Off
Date
Date&Time
[Date]
Low
Medium
High
AF Lamp
Sound
LCD
[Date&Time] : The DATE & TIME will be imprinted
on the image file.
Back:ꢀ
Set:OK
Back:
ꢀ
Set:OK
《64》
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup menu
[ Connecting an External Device (USB) ]
[ Selecting Video out type ]
■ You can select an external device to which you want to connect the camera
■ The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.)
to which the camera is connected. PAL mode can support only BDGHI.
using the USB cable.
● Sub menus
- [Computer] : Select this if you want to connect the
■ Connecting to an external monitor
SETUP
camera to your PC. Refer to page 77
In RECORDING/ PLAY mode, you can view the
AF Lamp
for instructions on how to connect the
Sound
USB
Computer
Printer
stored still images or movie clips by connecting the
SETUP
camera to your PC.
LCD
camera to an external monitor via the AV cable.
USB
Video Out
LCD
NTSC
- [Printer]
: Select this if you want to connect the
camera to your printer.
Back:ꢀ
Set:OK
When the camera is connected to an external
PAL
Video Out
Quick View
Reset
monitor, the LCD monitor will be turned off
automatically.
Refer to page 57 for instructions on
how to connect the camera to your
printer.
Back:ꢀ
Set:OK
[ LCD brightness ]
■ You can adjust the LCD brightness.
● [LCD] sub menu : Dark, Normal, Bright
SETUP
Sound
Dark
Yellow - Video
White - sound
USB
Normal
Bright
LCD
Video Out
Quick View
Back:ꢀ
Set:OK
《65》
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup menu
- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
[ Quick view ]
■ If you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
-
PAL
: Australia, Austria, Belgium, China, Denmark, Finland, Germany,
U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore,
Spain, Sweden, Switzerland, Thailand, Norway.
- When using a TV as an external monitor, you will need to select the external or
AV channel of the TV.
● Sub menus
[Off]
: The quick view function can’t be
activated.
SETUP
- There will be a digital noise on the external monitor, but it is not a malfunction.
- If the image is not in the centre of the screen, use the TV controls to centre it.
USB
off
[0.5, 1, 3 sec] : The captured image is briefly
displayed during the selected time.
LCD
0.5 sec
1 sec
3 sec
Video Out
Quick View
Reset
- When the camera is connected to an external monitor, the menu will be visible
on the external monitor and the menu functions are the same as those
indicated on the LCD monitor.
Back:ꢀ
Set:OK
[ Initialisation ]
■ All camera menu and function settings will be restored to their default values.
However, values for DATE/ TIME, LANGUAGE, and VIDEO OUT will not be
changed.
● Sub menus
[No] : Settings will not be restored to their
SETUP
defaults.
USB
LCD
[Yes] : All settings will be restored to their
Video Out
defaults.
Quick View
Reset
No
Yes
Back:ꢀ
Set:OK
《66》
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the Mycam menu
Start up sound
■ You can set up a start up image, start up sound and shutter sound. Every
■ You can select the sound that is activated whenever the camera is turned on.
camera working mode (with the exception of Voice recording mode) has the
● Start up sound : [Off], [Sound 1], [Sound 2],
MyCAM menu. The items indicated by
are default settings.
MYCAM
[Sound 3]
Start Image
Start Sound
Shutter Sound
Off
Sound 1
Sound 2
Sound 3
- If the start up image is set to [Off], the start up
sound will not activate, even though you may
have set these to on.
Menu tab
Main menu
Start Image
Sub menu
Page
p.67
Off
User Image 1
Off
LOGO
User Image 2
Sound 1
Back:ꢀ
Set:OK
Start Sound
p.67
p.67
Sound 2
Off
Sound 3
Sound 1
Shutter Sound
Sound 2
Sound 3
※ Menus are subject to change without prior notice.
Start up image
Shutter sound
■ You can select the image that is first displayed on the LCD monitor whenever
■ You can select the shutter sound.
the camera is turned on.
● Shutter sound : [Off], [Sound 1], [Sound 2],
MYCAM
[Sound 3]
● Start up image : [Off], [LOGO], [User Image1],
Start Image
Start Sound
Shutter Sound
Off
MYCAM
Sound 1
Sound 2
Sound 3
[User Image2]
Start Image
Start Sound
- Use a saved image for the start-up image with the
Shutter Sound
[User Image] in the [RESIZE] menu in the play mode.
Back:ꢀ
Set:OK
- The start-up image will not be deleted by [DELETE]
Back:ꢀ
Set:OK
or [Format] menu.
- The User images will be deleted by [Reset] menu.
《67》
Download from Www.Somanuals.com. All Manuals Search And Download.
Important notes
Be sure to observe the following precautions!
■ Extremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid environment,
condensation can form on the delicate electronic circuitry. If this occurs, turn
the camera off and wait for at least 1 hour until all moisture is dispersed.
Moisture built up can also occur on the memory card. If this happens, turn off
the camera and remove the memory card. Wait until the moisture has
dispersed.
■This unit contains precision electronic components. Do not use or store this unit
in the following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
■ Caution on Using the Lens
- If the lens is subjected to direct sunlight, it could result in the discoloration and
deterioration of the image sensor.
■Do not leave this camera in places subject to dust, chemicals (like naphthalene
and mothball), high temperature and high humidity.
- Pay attention not to get fingerprints or foreign substances on the surface of the
lens.
Keep this camera with silica gel in a hermetically sealed box when not planning
to use the camera for a long period of time
■ If the digital camera is not used for a long period, an electric discharge can
occur.
■Sand can be particularly troublesome to cameras.
- Do not let sand get inside the camera when using it on beaches, coastal
dunes, or other areas where there is lots of sand.
It is a good idea to remove the battery and the memory card if you do not intend
using the camera for an extended period of time.
- Doing so may result in failure or may permanently render the camera unusable.
■ If the camera is exposed to an electronic interference, it will turn itself off to
■Handling the camera
protect the memory card.
- Never drop the camera or subject it to severe shocks or vibrations.
- Protect the large size LCD monitor from an impact. When this camera is not
used, keep it in the camera case.
- Avoid obstructing the lens or the flash when you capture an image.
- This camera is not waterproof.
To avoid dangerous electrical shocks, never hold or operate the camera with
wet hands.
- If you use this camera in wet places, such as beach or pool, do not let water or
sand get inside the camera. Doing so may result in failure or may permanently
damage the unit.
《68》
Download from Www.Somanuals.com. All Manuals Search And Download.
Important notes
Warning indicator
■ Camera Maintenance
■ There are several warnings that may appear on the LCD display
- Use a soft brush (available from photo stores) to gently clean the lens and LCD
assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid
can be used.
Memory Error!
ㆍMemory card error
→ Turn off the camera power and turn it on again
→ Insert the memory card again
→ Insert and format the memory card (p.63)
Clean the camera body with a soft cloth. Do not allow this camera to come into
contact with solvent materials such as benzol, insecticide, thinners etc. This
may damage the body shell of the camera and also affect its performance.
Rough handling can damage the LCD monitor. Take care to avoid damage
and keep the camera in its protective carry case at all times when not in use.
Card Locked!
ㆍThe memory card is locked
→ SD/SDHC memory card : Slide the write protect switch to the top of the
■ Do not attempt to disassemble or modify the camera.
memory card
■ Under certain conditions, static electricity can cause the flash unit to fire. This is
No Card!
not harmful to the camera and is not a malfunction.
ㆍA memory card is not inserted
→ Insert the memory card again
→ Turn off the camera power and turn it on again
■ When images are uploaded or downloaded, the data transfer may be affected by
static electricity. In this case, disconnect and re-connect the USB cable before
trying the transfer again.
No Image!
ㆍThere are no images stored on the memory
→ Take images
■ Before an important event or going on a trip, you should check the camera
condition.
→ Insert a memory card that is holding some images
- Take a picture for testing the camera condition and prepare extra battery.
- Samsung cannot be held responsible for camera malfunctions.
File Error!
ㆍFile error
→ Format the memory card
ㆍMemory card error
→ Contact a camera service centre
《69》
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning indicator
Low Battery!
Battery power quickly drains
ㆍThere is low battery capacity
ㆍThe Camera is being used in low temperatures
→ Keep the camera in warm conditions (i.e. inside a coat or jacket) and only
remove it in order to take images
→ Insert fresh batteries.
Low Light!
Camera does not take images when pressing the Shutter button
ㆍThere is insufficient memory capacity
→ Delete unnecessary image files
ㆍWhen taking pictures in dark places
→ Take pictures in Flash Photography mode.
ㆍThe memory card has not been formatted
→ Format the memory card (p.63)
ㆍThe memory card is exhausted
→ Insert a new memory card
ㆍThe memory card is locked
Before contacting a service centre
→ Refer to [Card Locked!] error message (p.69)
ㆍThe camera’s power is off
■ Please check the following
→ Turn the camera power on
The camera doesn’t switch on
ㆍThe battery is exhausted
ㆍThere is low battery capacity
→ Insert fresh batteries. (p.10).
→ Insert fresh batteries. (p.10)
ㆍBattery is inserted incorrectly with the polarities reversed.
→ Insert the battery according to the polarity marks (+, -)
ㆍBattery is inserted incorrectly with the polarities reversed.
→ Insert the battery according to the polarity marks (+, -)
ㆍBattery is not inserted
The camera suddenly stops working while in use
ㆍThe camera stopped due to a malfunction
→ Insert the battery and turn on the camera
→ Remove /re-insert battery and switch the camera on
The camera power ceases while in use
ㆍThe battery is exhausted
→ Insert fresh batteries
ㆍThe Camera is turned off automatically
→ Turn on the camera power again.
《70》
Download from Www.Somanuals.com. All Manuals Search And Download.
Before contacting a service centre
The images are unclear
Colour of image is different to the original scene
ㆍWhite balance or effect setting is incorrect
→ Select appropriate White balance and effect
ㆍA picture was taken the subject without setting an appropriate macro mode
→ Select an appropriate macro mode to take a clear image.
ㆍTaking a picture beyond the flash range
→ Take a picture within the flash range
Images are too bright
ㆍExposure is excessive
→ Reset exposure compensation
ㆍThe lens is smudged or dirty
→ Clean the lens
No image on external monitor
The flash does not fire
ㆍThe external monitor has not been connected properly with the camera
→ Check the connection cables
ㆍFlash off mode has been selected
→ Dis-engage flash off mode
ㆍThere are incorrect files in the memory card
→ Insert a memory card that has correct files
ㆍThe camera mode can’t use the flash
→ Refer to the FLASH instruction (p.24)
When using the PC’s explorer, the [Removable Disk] file does not show
ㆍCable connection is incorrect
Incorrect date and time is displayed
ㆍThe date and time have been set incorrectly or the camera has adopted the
default settings
→ Check the connection
ㆍThe camera is off
→Reset the date and time correctly
→ Turn the camera on
The camera buttons do not operate
ㆍCamera malfunction
ㆍThe operating system is not Windows 98, 98SE, 2000, ME, XP/ Mac OS 10.0 -
10.3. Alternatively the PC does not support USB
→ Install Windows 98, 98SE, 2000, ME, XP/ Mac OS 10.0 - 10.3 to PC that
supports USB
→ Remove/re-insert battery and switch the camera on
A card error has occurred while the memory card is in the camera.
ㆍIncorrect memory card format
ㆍThe camera driver is not installed
→ Install a [USB Storage Driver]
→ Re-format the memory card
The images don't play back
ㆍIncorrect file name (Violation of DCF format)
→ Do not change the image file name
《71》
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
■ Image Sensor
■ Exposure
- Type : 1/1.8" CCD
- Control : Program AE, Shutter Priority AE, Aperture Priority AE or Manual
Exposure
- Effective Pixel : Approx. 8.1Mega-pixel
- Total Pixel : Approx. 8.3Mega-pixel
- Metering : Multi, Spot
- Compensation : ±2EV (1/2EV steps)
- ISO Equivalent : Auto, 50, 100, 200, 400, 800, 1600
■ Lens
- Focal Length : SHD f = 7.8 ~ 39mm (35mm film equivalent : 38 ~ 190mm)
- F No. : F2.8 ~ 4.4
■ Flash
- Digital Zoom :·Still Image mode : 1.0X ~ 5.0X
·Play mode : 1.0X ~ 12.0X (depends on image size)
- Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off
- Range : Wide : 0.2m ~ 3.0m
Tele : 0.5m ~ 2.5m (ISO AUTO)
■ LCD Monitor : 2.5" color TFT LCD (230,000 dots)
- Recharging Time : Approx. 5 sec.
■ Focusing
■ Sharpness : Soft, Normal, Vivid
- Type : TTL auto focus, AF Assist Lamp, Manual focus, Multi Point AF
- Range
■ Effect : Color(Normal, B/W, Sepia, Negative, Red, Green, Blue)
Composite, Highlight, Frame
Normal
Macro
Auto Mode
10cm ~ infinity
50cm ~ infinity
Wide
Tele
10 ~ 80cm
50 ~ 80cm
■ White Balance : Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L,
80cm ~ infinity
Tungsten, Custom
Super Macro
Manual Focus
Wide
Tele
1 ~ 10cm
-
1cm ~ infinity
50cm ~ infinity
■ Voice Recording : Voice Recording (max. 1hour)
Voice Memo in Still Image (max. 10 sec.)
■ Date Imprinting : Date, Date&Time, Off (user selectable)
■ Shutter
- Speed : Auto : 1 ~ 1/2,000 sec.
M, S Mode : 15 ~ 1/2,000 sec.
■ Shooting
- Still Image:·Modes : Auto, Program, A, S, M, ASR, Scene
·Scene : Night, Portrait, Children, Landscape, Close-up, Text,
Sunset, Dawn, Backlight, Fireworks, Beach & Snow
·Continuous : Single, Continuous, Motion Capture, AEB,
Interval Shooting
Night : 15 ~ 1/2,000 sec.
Fireworks : 4 sec.
·Self-timer : 10 sec., 2 sec., Double(10sec., 2sec.)
《72》
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
- Movie Clip :·With Audio (recording time : memory capacity dependent)
·Size: 800x592, 720x480, 640x480, 320x240
·Frame rate : 30 fps, 20 fps, 15 fps
■ Image Play
- Type : Single image, Thumbnails, Slide show, Movie Clip
- Editing : Trimming, Resizing, Rotate, Color Effect
■ Interface
(15/20 fps for 800x592, 720x480)
·Stabilizer
·Optical Zoom : up to 5.0X
- Digital output connector : USB 2.0(High Speed)
- Audio : Mono
■ Storage
- Media :·Internal about 20MB
- Video output : NTSC, PAL (user selectable)
- DC power input connector : 3.3V
·External memory : SD / MMC/ SDHC (up to 4GB guaranteed)
- File Format :·Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0
■ Power Source
·Movie Clip : AVI (MPEG-4)
·Audio : WAV
- Primary Battery : 2x AA Alkaline
- Rechargeable battery(Optional) : SNB-2512 KIT or SNB-2512B KIT
(2xAA Ni-MH Battery & Charger)
- Image Size
·Normal Shooting Mode
※ Included battery may vary depending on sales region.
8M
5M
3M
1M
1024X768
7M
■ Dimensions (WxHxD) : 104 x 63.6 x 24.8 mm (excluding protrusion)
■ Weight : 172g (without batteries and card)
■ Operating Temperature : 0 ~ 40°C
3264X2448
2592X1944
6M
2048X1536
Wide angle
Print angle
3264X1824
3264X2176
■ Operating Humidity : 5 ~ 85%
- Internal Capacity (256MB MMC(Multi Media Card))
■ Software
8M
57
7MP
68
6MW
84
5M
93
3M
1M
558
663
742
- Camera Driver : Storage Driver (98/98SE/2000/ME/XP, Mac OS 10.0 ~ 10.3)
- Application : Digimax Master
Super Fine
Fine
172
265
425
103
180
115
206
134
233
158
271
※ Specifications are subject to change without prior notice.
Normal
※ All trademarks are the property of their respective owners.
※ These figures are measured under Samsung’s standard conditions and may
vary depending on shooting conditions and camera settings.
《73》
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Notes
About the software
Please ensure that you read the instruction manual carefully before use.
•The attached software is a camera driver and image editing software tool for
Windows.
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the
following window should automatically run.
Before connecting the camera to the PC, you
should first install the camera driver.
•Under no circumstances should all or part of either the software or the user
manual be reproduced.
•Copyrights for software are licensed only for use with a camera.
•In the unlikely event of a manufacturing fault, we will repair or exchange your
camera.
※Screen Captures illustrated on this manual is
based on English Edition of Windows.
We cannot, however, be held responsible in any way for damage caused by
inappropriate use.
•Using a Hand-made PC or a PC and OS that has not been guaranteed by the
manufacturer is not covered by the Samsung warranty.
•Before reading this manual, you should have a basic knowledge of computers
and O/S (Operating Systems).
■ Camera driver : This enables images to transfer between the camera and PC.
This camera uses the USB Storage Driver as the camera driver. You can use the
camera as a USB card reader. After installing the driver and connecting this
camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My
computer]. A USB Storage Driver is provided only for Windows. A USB Driver for
MAC is not included with the Application CD. You can use the camera with Mac
OS 10.0 ~ 10.3.
System Requirements
For Windows
For Macintosh
■ Digimax Master : This is the all-in-one multi media software solution.
You can download, view, edit and save your digital images and movie clips clip
with this software. This software is only compatible with Windows.
PC with processor better than Pentium II 450MHz
(Pentium 700MHz recommended)
Power Mac G3 or later
Windows 98 / 98SE / 2000 / ME / XP
Minimum 64MB RAM
200MB of available hard disk space
USB port
Mac OS 10.0 ~ 10.3
Minimum 64MB RAM
110MB of available hard-disk space
USB port
INFORMATION
● Be sure to check the system requirements before installing the driver.
● You should allow 5 ~ 10 seconds for running the automatic setup program
according to the capability of your computer. If the frame does not show, run
the [Windows Explorer] and select [Samsung.exe] in the CD-ROM Drive
root directory.
CD-ROM drive
CD-ROM drive
1024x768 pixels, 16bit color display
compatible monitor
For playing back a movie clip
Mac OS 10.1 or later
MPlayer
(24bit color display recommended)
《74》
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the application software
■ To use this camera with a PC, install the application software first.
After this has been done, the stored images in the camera can be moved to the
PC and can be edited by an image editing program.
■ You can visit the Samsung web-site through the internet.
1. The auto run frame will display.
Click the [Install] menu in the Auto run
frame.
2. Install the camera driver, DirectX, Xvid and Digimax Master by selecting a
button shown on the monitor. If an upper version of DirectX was installed on
your computer, DirectX may not be installed.
※ The XviD codec is distributed according to and under the terms and conditions of
the GNU General Public License and everyone can copy, modifiy and distribute
this codec freely, but WITHOUT ANY WARRANTY, IMPLIED OR
EXPRESSED, OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE; provided, however, that you have to follow the GNU General Public
License whenever you are distributing this codec or modification thereof.
For more information see the GNU General Publice License documents
(http://www.gnu.org/copyleft/gpl.html).
《75》
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the application software
3. After restarting the computer, connect the PC to the camera with the USB
cable.
4. Turn the camera power on.
The [Found New Hardware Wizard] will
open and the computer will recognise the
camera.
※ If your OS is Windows XP, an image
viewer program will open.
If the download window of Digmax Master
opens after starting Digimax Master, the
camera driver was set up successfully.
INFORMATION
● If you have installed the camera driver, the [Found New Hardware Wizard]
may not open.
● On a Windows 98 or 98 SE system, the Found New Hardware Wizard
dialog box opens and a window asking you to select a driver file may
appear. In this case, specify "USB Driver" in the CD supplied. (for Windows
98 and 98 SE).
《76》
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting PC mode
•If you connect the USB cable to a USB port on your PC and then turn on the
power, the camera will automatically switch to "computer connection mode".
•In this mode, you can download stored images to your PC through the USB
cable.
■ Connecting the camera to a PC
•The LCD monitor is always turned off in PC mode.
■ Connecting the camera to a PC
1. In any mode with the exception of Voice Recording
SETUP
mode, press the Menu button.
AF Lamp
2. Press the LEFT/ RIGHT button and select the
Sound
USB
Computer
Printer
[SETUP] menu tab.
LCD
Video Out
3. Select the [USB] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Use the UP and DOWN buttons to select
[Computer], and then press the OK button.
5. Press the menu button twice and the menu will
disappear.
Back:ꢀ
Set:OK
※If you selected [Printer] in Step 4, when you connect the camera to your
printer, the [Connecting Printer] message will display and the connection will
not be established.
In this case, disconnect the USB cable, and then follow the procedure from
Step 2 and onward.
6. Connect the PC to the camera with the USB cable.
■ Disconnecting the camera and PC : Refer to page 79
(Removing the removable disk).
INFORMATION
● Before inserting cables, check the directions and do not insert by force. It
may cause breakage of cable or camera.
《77》
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting PC mode
6. Press the right mouse button and a pop-up
menu will open. Click [Paste].
■ Downloading stored images
You can download the still images stored on the camera to your PC's hard disk
and print them or use a photo editing software to edit them.
1. Connect the camera to your PC with the USB cable.
2. On your computer's desktop display, select
[My computer] and double click [Removable
Disk → DCIM → 100SSCAM].
The image files will then be displayed.
7. An image file is transferred from the camera
to your PC.
3. Select an image and press the right
mouse button.
- By using [Digimax Master], you can see the stored images in the memory
directly on the PC monitor and you can copy or move the image files.
CAUTION
4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.
- [Cut] : cuts a selected file.
- [Copy] : copies files.
● We recommend that you should copy the images to the PC to view them.
Opening images directly from the removable disk may be subject to
unexpected disconnection.
● When you upload a file that is not taken by this camera to the Removable
Disk, the [File Error!] message will be displayed on the LCD monitor in the
PLAY mode, and nothing is displayed in THUMBNAIL mode.
5. Click a folder where you want to paste the file.
《78》
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the removable disk
5. A [Safe to Remove Hardware] window will
open. Click the [OK] button.
■ Windows 98/98SE
1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, please wait until the lamp has finished
blinking and is constantly on.
6. A [Unplug or Eject Hardware] window will
open. Click the [Close] button and the
removable disk will be removed safely.
2. Unplug the USB cable.
■ Windows 2000/ME/XP
(The illustrations may differ from those shown depending on the Windows O/S.)
1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, please wait until the lamp has finished
blinking and is constantly on.
7. Unplug the USB cable.
2. Double-click the [Unplug or Eject Hardware]
icon on the task bar.
[Double-click!]
3. The [Unplug or Eject Hardware] window will
open. Select the [USB Mass Storage Device]
and click the [Stop] button.
4. The [Stop a Hardware device] window will open.
Select the [USB Mass Storage Device] and click
the [OK] button.
《79》
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the USB Driver for MAC
Removing the USB Driver for Windows 98SE
1. A USB Driver for MAC is not included with the software CD as MAC OS
supports the camera driver.
2. Check the MAC OS version during start-up.
This camera is compatible with MAC OS 10.0 ~ 10.3.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the camera to
the MAC.
■ To remove the USB driver, refer to the process shown below.
1. Connect the camera to your PC and turn them on.
2. Check whether the Removable Disk is on the [My Computer].
3. Remove the [Samsung Digital Camera] on the Device manager.
Using the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory will be
displayed.
2. Select an image file and copy or move it to MAC.
4. Disconnect the USB cable.
5. Remove the [Samsung USB Driver] on the Add/Remove Programs
Properties.
CAUTION
● For Mac OS 10.0 or later : First complete uploading from computer to
camera and then remove the removable disk
with the Extract command.
●If a movie clip can’t play back on the Mac OS, please visit the following
media player that supports the Xvid codec (Mplayer).
6. Uninstallation is complete.
《80》
Download from Www.Somanuals.com. All Manuals Search And Download.
Digimax Master
4. Select a destination and make a folder to
save downloaded images and folders.
- Folder names can be made in order of date
and images will be downloaded.
■ You can download, view, edit and save your images and movies with this
software. This software is only compatible with Windows except for
the Windows 98.
■ To start the program, click [Start → Programs → Samsung → Digimax Master
→ Digimax Master].
- Folder name will be made as you want and
images will be downloaded.
● Downloading images
- After selecting a folder that was made
before, images will be downloaded.
1. Connect the camera to your PC.
2. A window for downloading images will
display after connecting the camera to your
PC.
5. Click [Next >] button.
6. A window will open as shown alongside.
The destination of the selected folder will be
displayed on the upper side of the window.
Click the [Start] button to download the
images.
- To download the captured images, select
the [Select All] button.
- Select desired folder in the window and
click the [Select All] button. You can save
captured images and selected folder.
- If you click the [Cancel] button, downloading will be
cancelled.
3. Click [Next >] button.
7. Downloaded images will be displayed.
《81》
Download from Www.Somanuals.com. All Manuals Search And Download.
Digimax Master
● Image viewer : You can view the stored images.
● Image edit : You can edit the still image.
①
⑤
⑥
①
④
⑦
②
③
④
②
③
- Image viewer functions are listed below.
- Image edit functions are listed below.
① Menu bar : You can select menus.
① Edit menu : You can select the following menus.
[Tools] : You can resize or crop the selected image. See the [Help] menu.
File, Edit, View, Tools, Change functions, Auto download, help, etc.
② Image selection window : You can select the desired images in this window.
③ Media type selection menu : You can select image viewer, image edit and
movie edit functions in this menu.
[Adjust] : You can modify image quality. See the [Help] menu.
[Retouch] : You can change image or insert effects on the image. See the
[Help] menu.
④ Preview window : You can preview an image or a movie clip and check the
multi media information.
② Drawing tools : Tools for editing an image.
③ Image display window : A selected image displays in this window.
④ Preview window : You can preview the changed image.
⑤ Zoom bar : You can change preview size.
⑥ Folder display window : You can see the folder location of the selected
image.
※ A still image edited with Digimax Master can’t be played back on the camera.
⑦ Image display window : Images of the selected folder are displayed.
※ Refer to the [Help] menu in Digimax Master for further information.
※ Refer to the [Help] menu in Digimax Master for further information.
《82》
Download from Www.Somanuals.com. All Manuals Search And Download.
Digimax Master
FAQ
● Movie edit : You can get the still image, movie clip, narration, music files together
■ Please check the following if the USB connection malfunctions.
in a movie clip.
Case 1
USB cable is not connected or it is not the supplied USB cable.
→ Connect the supplied USB cable.
①
Case 2
The camera is not recognised by your PC.
Sometimes, the camera may appear under [Unknown Devices] in
Device Manager.
→ Install the camera driver correctly.
Turn off the camera, remove the USB cable, plug in the USB cable
again, and then turn on the camera.
②
Case 3
Case 4
There is an unexpected error during file transfer.
→ Turn the camera power off and on again. Transfer the file again.
- Movie clip edit functions are listed below.
① Edit menu : You can select the following menus.
When using the USB hub.
[Add Media] : You can add other media elements to a movie.
[Edit Clip] : You can change the brightness, contrast, colour and saturation.
→ There may be a problem in connecting the camera to the PC through
the USB hub if the PC and the hub are not compatible. Wherever
possible, connect the camera to the PC directly.
[Effects]
[Set Text] : You can insert texts.
[Narrate] : You can insert a narration.
: You can insert an effect.
[Produce] : You can save the edited multi media as a new file name.
You can select AVI, Windows media (wmv), Windows media
(asf) and movie clip for this camera (avi, MPEG-4) file types.
② Frame display window : You can insert multi media in this window.
Case 5
Are other USB cables connected to the PC?
→ The camera may malfunction when it is connected to the PC at the
same time as another USB cable. In this case, disconnect the other
USB cable, and connect only one USB cable to the camera.
※ Some movie clips that were compressed with a codec that is not compatible with
the Digimax Master can’t play back in the Digimax Master.
※ Refer to the [Help] menu in Digimax Master for further information.
《83》
Download from Www.Somanuals.com. All Manuals Search And Download.
FAQ
Case 6
When I open the Device Manager (by clicking Start → (Settings) →
■ When the movie clip doesn’t play back on the PC
Control Panel → (Performance and Maintenance) → System →
(Hardware) → Device Manager), there are Unknown Devices or Other
Devices entries with a yellow question mark(?) beside them or devices
with an exclamation mark(!) beside them.
※ When the movie clip recorded by the camera doesn’t play back on the PC,
the causes are mostly due to the codec installed on the PC.
● When codec for play back the movie clip isn’t installed
→ Right-click on the entry with the question (?) or exclamation (!) mark
and select "Remove". Restart the PC and connect the camera again.
For Windows 98 PC, remove the camera driver also, restart the PC,
and then reinstall the camera driver.
→ Install the codec as listed below.
[ Installing codec for Windows ]
1) Insert the CD provided with the camera.
2) Run the windows explorer and select [CD-ROM drive:\XviD] folder and
click the XviD-1.1.0-30122005.exe file.
Case 7
In some security programs (Norton Anti Virus, V3, etc.), the computer
may not recognise the camera as a removable disk.
→ Stop the security programs and connect the camera to the computer.
Refer to the security program instructions about how to temporarily
disable the program.
※ The XviD codec is distributed according to the GNU General Public License
and everyone can copy, distribute and change this codec. This License
applies to any program or other work which contains a notice placed by the
copyright holder saying it may be distributed under the terms of this General
Public License.
For more information, see the License documents
(http://www.gnu.org/copyleft/gpl.html).
Case 8
The camera is connected to the USB port located on the front of the
computer.
[ Installing codec for Mac OS ]
→ When the camera is connected to the USB port located on the front of
the computer, the computer may not recognise the camera. Connect
the camera to the USB port located on the back of the computer.
1) Visit the following site for downloading the codec.
(http://www.divx.com/divx/mac)
2) Click the [Free Download] button located at the upper right side of the page
and a window for downloading the DivX codec will display.
3) Select Mac OS you use and click the [Download] button. Save it on a folder
you want to.
4) Run the downloaded file and the codec for playing back the movie clip will
be installed.
※ If a movie clip can’t play back on the Mac OS, use a media player that
supports XviD codec (Mplayer).
《84》
Download from Www.Somanuals.com. All Manuals Search And Download.
FAQ
Correct Disposal of This Product
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
● When the DirectX 9.0 or later is not installed
→ Install the DirectX 9.0 or later
(Applicable in the European Union and other European countries with
separate collection systems) This marking shown on the product or its
literature, indicates that it should not be disposed with other household
1) Insert the CD provided with the camera
2) Run the windows explorer and select the [CD-ROM drive:\ USB
Driver\DirectX 9.0] folder and click the DXSETUP.exe file.
The DirectX will be installed. Visit the following site for downloading the
wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their supplier and
check the terms and conditions of the purchase contract.
● If a PC (Windows 98) stops responding while the camera and PC are connected
repeatedly
→ If a PC (Windows 98) is turned on for a long time and the camera is
connected repeatedly, the PC may not recognise the camera. In this case, re-
start the PC.
This product should not be mixed with other commercial wastes for disposal.
● If a PC connected with the camera stops responding while Windows is starting.
→ In this case, disconnect the PC and the camera and Windows will start.
If the problem happens continuously, set the Legacy USB Support to disable
and re-start the PC. The Legacy USB Support is in the BIOS setup menu.
(The BIOS setup menu differs from the PC manufacturers and some BIOS
menus don’t have Legacy USB Support) If you can’t change the menu by
yourself, contact to the PC manufacturer or BIOS manufacturer.
● If the movie clip can’t be deleted, removable disk can’t be extracted or an error
message displays during the file transfer.
→ If you install only the Digimax Master, the problems mentioned above
occasionally happen.
Samsung Techwin cares for the environment at all product
manufacturing stages to preserve the environment, and is
taking a number of steps to provide customers with more
environment-friendly products. The Eco mark represents
Samsung Techwin's will to create environment-friendly
products, and indicates that the product satisfies the EU
RoHS Directive.
- Close the Digimax Master program by clicking the Digimax Master icon on
the Taskbar.
- Install all the application programs included in the software CD.
(You must install the Movie clip codec)
《85》
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC notice
MEMO
■ NOTE :
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to pro-vide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and,
if not in-stalled and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
■ CAUTION :
Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the
equipment.
■ Declaration of Conformity
Trade Name
Model No.
: SAMSUNG TECHWIN
: Digimax S850
Responsible Party : Samsung Opto-Electronics America, INC.
Address
Telephone No.
: 40 Seaview Dr. Secaucus,NJ 07094
: 201-902-0347
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
《86》
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
MEMO
《87》
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
MEMO
《88》
Download from Www.Somanuals.com. All Manuals Search And Download.
|