Pioneer DVD Player DV 2750 User Manual

DVD Player

DV-370

DV-470

DV-2750

Operating Instructions

Download from Www.Somanuals.com. All Manuals Search And Download.

POWER-CORD CAUTION

When disposing of used batteries, please comply

with governmental regulations or

environmental public instruction s rules that

Handle the power cord by the plug. Do not pull out the

plug by tugging the cord and never touch the power

cord when your hands are wet as this could cause a

short circuit or electric shock. Do not place the unit, a

piece of furniture, etc., on the power cord, or pinch the

cord. Never make a knot in the cord or tie it with other

cords. The power cords should be routed such that they

are not likely to be stepped on. A damaged power cord

can cause a fire or give you an electrical shock. Check

the power cord once in a while. When you find it

damaged, ask your nearest PIONEER authorized

service center or your dealer for a replacement. S002_En

apply in your country/area.

D3-4-2-3-1_En

This product is intended for household purposes.

Any failure due to use for other than household

purposes (such as long-term use for business

purposes in a restaurant or use in a car or ship)

and which requires repair will be charged for even

in the warranty period.

K041_En

This product incorporates copyright

protection technology that is protected by

method claims of certain U.S. patents and

other intellectual property rights owned by

Macrovision Corporation and other rights

owners. Use of this copyright protection

technology must be authorized by

Macrovision Corporation, and is intended for

home and other limited uses only unless

otherwise authorized by Macrovision

Corporation. Reverse engineering or

disassembly is prohibited.

This product includes FontAvenue® fonts

licenced by NEC corporation. FontAvenue is a

registered trademark of NEC Corporation.

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

01 Before you start

05 Playing discs

08 Additional information

Taking care of your player and

Features . . . . . . . . . . . . . . . . . . . . . . 5

What’s in the box . . . . . . . . . . . . . . . 5

Hints on installation . . . . . . . . . . . . . 5

Disc / content format playback

Scanning discs . . . . . . . . . . . . . . . . 13

Playing in slow motion. . . . . . . . . . . 13

Frame advance/frame reverse . . . . . 13

Viewing a JPEG slideshow . . . . . . . . 13

Browsing video content with the

discs . . . . . . . . . . . . . . . . . . . . . . . .20

Screen sizes and disc formats . . . . .20

Setting the TV system. . . . . . . . . . . .21

Resetting the player . . . . . . . . . . . . .21

Power reset . . . . . . . . . . . . . . . . . . .21

DVD-Video regions . . . . . . . . . . . . . .21

Selecting languages using the

language code list . . . . . . . . . . . . . .21

Language code list. . . . . . . . . . . . . .22

Country code list . . . . . . . . . . . . . . .22

Glossary . . . . . . . . . . . . . . . . . . . . . .22

compatibility. . . . . . . . . . . . . . . . . . . 6

Disc Navigator. . . . . . . . . . . . . . . . . 13

Browsing WMA, MP3 and JPEG files

with the Disc Navigator . . . . . . . . . . 14

Looping a section of a disc . . . . . . . 14

Using repeat play. . . . . . . . . . . . . . . 14

Using random play . . . . . . . . . . . . . 15

Creating a program list . . . . . . . . . . 15

Searching a disc . . . . . . . . . . . . . . . 15

Switching subtitles . . . . . . . . . . . . . 16

Switching audio language/channel. . 16

Zooming the screen. . . . . . . . . . . . . 16

Switching camera angles . . . . . . . . 16

Displaying disc information . . . . . . . 16

02 Connecting up

Easy connections . . . . . . . . . . . . . . . 7

Connecting using a SCART AV

cable . . . . . . . . . . . . . . . . . . . . . . . . 7

Connecting using the S-video

output. . . . . . . . . . . . . . . . . . . . . . . . 7

Connecting using the component

video output . . . . . . . . . . . . . . . . . . . 7

Connecting to an AV receiver . . . . . . 8

09 DivX® video playback (DV-

470 only)

About DivX . . . . . . . . . . . . . . . . . . . .24

Playing DivX video . . . . . . . . . . . . . .24

About DivX® VOD content . . . . . . . .25

Playing DivX® VOD content. . . . . . .25

03 Controls and displays

Front panel. . . . . . . . . . . . . . . . . . . . 9

Remote control. . . . . . . . . . . . . . . . . 9

06 Audio Settings and Video

Adjust menus

Audio Settings menu . . . . . . . . . . . . 17

04 Getting started

Switching on . . . . . . . . . . . . . . . . . 10

Using the on-screen displays . . . . . 10

Setting up the player for your TV. . . 10

Setting the language of this player’s

on-screen displays . . . . . . . . . . . . . 10

Playing discs . . . . . . . . . . . . . . . . . 11

Video Adjust menu (DV-470 only). . . 17

07 Initial Settings menu

Using the Initial Settings menu . . . . 18

Digital Audio Out settings . . . . . . . . 18

Video Output settings . . . . . . . . . . . 18

Language settings . . . . . . . . . . . . . . 18

Display settings . . . . . . . . . . . . . . . . 19

Parental Lock. . . . . . . . . . . . . . . . . . 19

Download from Www.Somanuals.com. All Manuals Search And Download.

Before you start

Chapter 1

Important

Before you start

Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the

following:

• Don’t mix new and old batteries together.

Features

• Don’t use different kinds of battery together—although they may look similar, different batteries

may have different voltages.

• Make sure that the plus and minus ends of each battery match the indications in the battery

compartment.

• Remove batteries from equipment that isn’t going to be used for a month or more.

• When disposing of used batteries, please comply with governmental regulations or

environmental public instruction’s rules that apply in your country or area.

H048 En

•

24-bit/192kHz compatible DAC

The on-board 24-bit/192kHz DAC means that this player is fully compatible with high sampling-rate

discs, capable of delivering exceptional sound quality in terms of dynamic range, low-level resolution

and high-frequency detail.

•

Surround sound entertainment with Dolby Digital and DTS software

When connected to a suitable AV amplifier or receiver, this player gives great surround sound with

Dolby Digital and DTS discs.

•

Pure Cinema progressive scan video

Hints on installation

We want you to enjoy using this product for years to come, so please use the following guidelines

when choosing a suitable location:

When connected to a progressive scan-compatible TV or monitor using the component video

outputs, you can enjoy extremely stable, flicker free images, with the same frame refresh rate as the

original movie.

•

New Disc Navigator with moving pictures

The new Disc Navigator enables you play the first few seconds of each title ot chapter in a thumbnail

Do...

image on screen.

• Use in a well-ventilated room.

•

DSP effects for enhanced playback

See Audio Settings and Video Adjust menus on page 17.

Picture zoom

See Zooming the screen on page 16.

MP3 and WMA compatibility

See Compressed audio compatibility on page 6.

JPEG compatibility

See JPEG file compatibility on page 6.

Energy saving design

• Place on a solid, flat, level surface, such as a table, shelf or stereo rack.

•

Don’t...

• Use in a place exposed to high temperatures or humidity, including near radiators and other

heat-generating appliances.

•

• Place on a window sill or a place where the player will be exposed to direct sunlight.

• Use in an excessively dusty or damp environment.

•

• Place directly on top of an amplifier, or other component in your stereo system that becomes hot

in use.

•

• Use near a television or monitor as you may experience interference—especially if the television

uses an indoor antenna.

An auto power-off function switches the player into standby if not used for about 30 minutes.

• Use in a kitchen or other room where the player may be exposed to smoke or steam.

• Use on a thick rug or carpet, or cover with cloth—this may prevent proper cooling of the unit.

• Place on an unstable surface, or one that is not large enough to support all four of the unit’s feet.

What’s in the box

Please confirm that the following accessories are in the box when you open it.

• Remote control

• AA/R6P dry cell batteries x2

• Audio/video cable (red/white/yellow plugs)

• Power cable

• Operating instructions

• Warranty card

Putting the batteries in the remote

•

Open the battery compartment cover and insert the batteries as shown.

Use two AA/R6P batteries and follow the indications (ꢀ, ꢁ) inside the compartment. Close the cover

when you’re finished.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before you start

Compressed audio compatibility

Disc / content format playback compatibility

• Compatible formats: MPEG-1 Audio Layer 3 (MP3), Windows Media Audio (WMA)

• Sampling rates: 32, 44.1 or 48kHz

This player is compatible with a wide range of disc types (media) and formats. Playable discs will

generally feature one of the following logos on the disc and/or disc packaging. Note however that

some disc types, such as recordable CD and DVD, may be in an unplayable format—see below for

further compatibility information.

• Bit-rates: Any (128Kbps or higher recommended)

• VBR (variable bit rate) MP3 playback: No

• VBR WMA playback: No

Please also note that recordable discs cannot be recorded using this player.

• WMA lossless encoding compatible: No

• DRM (Digital Rights Management) compatible: Yes (DRM-protected audio files will not play in

this player—see also DRM in the Glossary on page 22)

• File extensions: .mp3, .wma (these must be used for the player to recognize MP3 and WMA files

– do not use for other file types)

DVD-Video

DVD-R

DVD-RW

• File structure: Up to 299 folders; up to 648 folders and files combined

About WMA

Audio CD

Video CD

CD-R

CD-RW

Fujicolor CD

•

is a trademark of Fuji Photo Film Co. Ltd.

• Also compatible with KODAK Picture CD

This player supports the IEC’s Super VCD standard. Compared to the Video CD standard, Super VCD

offers superior picture quality, and allows two stereo soundtracks to be recorded. Super VCD also

supports the widescreen size.

The Windows Media logo printed on the box indicates that this player can playback Windows Media

Audio content.

WMA is an acronym for Windows Media Audio and refers to an audio compression technology

developed by Microsoft Corporation. WMA content can be encoded by using Windows Media

Player version 7, 7.1, Windows Media Player for Windows XP, or Windows Media Player 9 Series.

Microsoft, Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft

Corporation in the United States and/or other countries.

Super VCD

CD-R/RW compatibility

• Compatible formats: CD-Audio, Video CD/Super VCD, ISO 9660 CD-ROM* containing MP3,

WMA or JPEG files

JPEG file compatibility

• Compatible formats: Baseline JPEG and EXIF 2.2* still image files up to a resultion of 3072 x

* ISO 9660 Level 1 or 2 compliant. CD physical format: Mode1, Mode2 XA Form1. Romeo and Joliet

file systems are both compatible with this player.

• Multi-session playback: No

2048.

*File format used by digital still cameras

• Progressive JPEG compatible: No

• Unfinalized disc playback: No

• File extensions: .jpg (must be used for the player to recognize JPEG files – do not use for other

file types)

DVD-R/RW compatibility

• File structure: Up to 299 folders; up to 648 folders and files combined

• Compatible formats: DVD-Video, Video Recording (VR)*

* Edit points may not play exactly as edited; screen may go momentarily blank at edited points.

• Unfinalized playback: No

PC-created disc compatibility

• WMA/MP3/JPEG file playback on DVD-R/RW: No

Discs recorded using a personal computer may not be playable in this unit due to the setting of the

application software used to create the disc. In these particular instances, check with the software

publisher for more detailed information.

Discs recorded in packet write mode (UDF format) are not compatible with this player.

Check the DVD-R/RW or CD-R/RW software disc boxes for additional compatibility information.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting up

Chapter 2

Connecting using a SCART AV cable

A SCART-type AV connector is provided for connection to a TV or AV receiver. The video output is

switchable between ordinary composite, S-video and RGB. See page 23 for how to set it.

The SCART AV connector also outputs analog audio, so there is no need to also connect the AUDIO

OUT L/R jacks.

Connecting up

Easy connections

The setup described here is a basic setup that allows you to play discs using just the cables supplied

with the player. In this setup, stereo audio is played through the speakers in your TV.

SCART

DIGITAL AUDIO OUT

COAXIAL

AUDIO OUT

DIGITAL AUDIO OUT

COAXIAL

AUDIO OUT

AV CONNECTOR (RGB) TV/AV Receiver

VIDEO OUT

COMPONENT VIDEO OUT

VIDEO OUT

COMPONENT VIDEO OUT

DV-2750

DV-370

White

Red

DV-2750

DV-370

Yellow

Use a SCART cable (not supplied) to connect the AV CONNECTOR (RGB) output to a

SCART AV input on your TV (or AV receiver).

Connecting using the S-video output

Important

• This player is equipped with copy protection technology. Do not connect this player to your TV

via a VCR using audio/video or S-video cables, as the picture from this player will not appear

properly on your TV. (This player may also not be compatible with some combination TV/VCRs

for the same reason; refer to the manufacturer for more information.)

If your TV (or other equipment) has an S-video (S1)

input, you can use the S-video output on this

player instead of the standard (composite) output

for a better quality picture.

S-VIDEO

• When connecting to your TV as shown above, do not set the Component Out setting (see Video

•

Use an S-video cable (not supplied) to

Output settings on page 18) to Progressive.

Connect the VIDEO OUT and AUDIO OUT L/R jacks to a set of A/V inputs on your TV.

connect the S-VIDEO OUT to an S-video input

on your TV (or monitor or AV receiver).

Line up the small triangle above the jack with the

same mark on the plug before plugging in.

Use the supplied audio/video cable, connecting the red and white plugs to the audio outputs and the

yellow plug to the video output. Make sure you match up the left and right audio outputs with their

corresponding inputs for correct stereo sound.

See below if you want to use a component or S-video cable for the video connection.

• DV-470 only: You can use either of the AUDIO OUT L/R jacks for the audio connection. Each pair

of jacks output the same thing.

DIGITAL AUDIO OUT

COAXIAL

AUDIO OUT

VIDEO OUT

COMPONENT VIDEO OUT

DV-2750

DV-370

Connect the supplied AC power cable to the AC IN inlet, then plug into a power outlet.

Note

Connecting using the component video output

You can use the component video output instead of the standard video out jack to connect this player

to your TV (or other equipment). This should give you the best quality picture from the three types of

video output available.

• Before unplugging the player from the power outlet, make sure you first switch it into standby

using either the front panel ꢂSTANDBY/ON button, or the remote control, and wait of the -OFF-

message to disappear from the player’s display.

• For the above reasons, do not plug this player into a switched power supply found on some

amplifiers and AV receivers.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting up

Connecting to an AV receiver

•

Use a component video cable (not

To enjoy multichannel surround sound you need to connect this player to an AV receiver using the

digital audio output.

supplied) to connect the COMPONENT VIDEO

OUT jacks to a component video input on your

TV, monitor or AV receiver.

Model DV-470 has both optical and coaxial digital outputs; models DV-2750 and DV-370 have only a

coaxial-type output.

COMPONENT

VIDEO IN

In addition to a digital connection, we recommend also connecting using the stereo analog

connection.

You’ll probably also want to connect a video output to your AV receiver. You can use any of the video

outputs available on this player (the illustration shows a standard (composite) connection).

DIGITAL AUDIO OUT

COAXIAL

AUDIO OUT

Connect the DIGITAL AUDIO OUT

VIDEO OUT

COMPONENT VIDEO OUT

COAXIAL jack on this player to a coaxial

digital input on your AV receiver.

DV-2750

DV-370

DIGITAL IN

(COAXIAL)

AV receiver

Use a coaxial cable (similar to the supplied video

cable) to connect the COAXIAL DIGITAL AUDIO

OUT jack to a coaxial input on your AV receiver.

Watching progressive scan video from the component video outputs

This player can output progressive scan video from the component video output. Compared to

interlace video, progressive scan video effectively doubles the scanning rate of the picture, resulting

in a very stable, flicker-free image.

DIGITAL AUDIO OUT

COAXIAL

AUDIO OUT

To set up the player for use with a progressive scan TV, see Video Output settings on page 18. When

the player is set to output progressive scan video, the PRGSVE indicator lights in the front panel

display.

VIDEO OUT

COMPONENT VIDEO OUT

DV-2750

DV-370

Important

• DV-2750/DV-370 only: When Component Out (page 18) is set to Progressive, there is no video

DV-470 only: You can also use the optical output

(OPTICAL DIGITAL AUDIO OUT) to make the

same connection.

DIGITAL IN

(OPTICAL)

output from the VIDEO OUT (composite) and S (S-video) jacks.

• DV-2750/DV-370 only: If you want to display video on more than one monitor simultaneously,

make sure the player is set to Interlace.

• If you connect a TV that is not compatible with a progressive scan signal and switch the player

to progressive, you will not be able to see any picture at all. In this case, switch everything off

and reconnect using the supplied video cable (see Easy connections on page 7), then switch

back to Interlace (see below).

AV receiver

DIGITAL IN

(COAXIAL)

Switching the video output to interlace using the front panel controls

COAXIAL

Switch the player to standby then, using the front

ꢂ STANDBY/ON

panel controls, press ꢂ STANDBY/ON while

VIDEO

OPTICAL

DIGITAL AUDIO OUT OUT

AUDIO OUT

COMPONENT VIDEO OUT

VIDEO OUT

pressing ꢃ to switch the player back to

Interlace.

DV-470

STANDBY/ON

ꢃ

ꢄ

ꢆ

ꢅ

Connect the analog AUDIO OUT L/R and

VIDEO OUT jacks on this player to a set of

analog audio and video inputs on your AV

receiver.

DV-2750

ꢃ

AV receiver

AUDIO/

VIDEO IN

Compatibility of this player with progressive-scan and high-definition TVs

This player is compatible with progressive video Macro Vision System Copy Guard.

• You can use the SCART AV connector, or the

S-video or component video jacks to connect

to the AV receiver if you prefer.

Consumers should note that not all high-definition television sets are fully compatible with this

product and may cause artifacts to be displayed in the picture. In case of 525 progressive scan

picture problems, it is recommended that the user switch the connection to the ‘standard definition’

output (Interlace). If there are questions regarding our TV set compatibility with this model, please

contact our customer service center.

DIGITAL AUDIO OUT

COAXIAL

AUDIO OUT

VIDEO OUT

COMPONENT VIDEO OUT

DV-2750

DV-370

This player is compatible with the following Pioneer displays and monitors:

PDP-504HDE, PDP-434HDE

Download from Www.Somanuals.com. All Manuals Search And Download.

Controls and displays

Chapter 3

Remote control

Controls and displays

ꢂ STANDBY/ON (page 10)

AUDIO (page 16)

SUBTITLE (page 16)

Number buttons (page 11)

TOP MENU (page 12)

ENTER & cursor buttons (page 10)

HOME MENU (page 10)

ꢉ and ꢊ/ꢋ (page 13)

ꢈ (page 11)

Front panel

STANDBY/ON

OPEN/CLOSE

ꢇ

ꢂ

TOP MENU

OPEN/

ꢇ

AUDIO

SUBTITLE

ANGLE

CLEAR

ENTER

HOME

RETURN

STANDBY/ON

ꢃ

ꢄ

ꢆ

ꢅ

ꢈ

DV-2750

13 12 11

10 ꢃ (page 11)

11 ꢅ (page 11)

TOP MENU

12 PLAY MODE (page 14)

13 SURROUND (page 17)

14 ꢇ OPEN/CLOSE (page 11)

15 ANGLE (page 16)

16 CLEAR

17 ENTER (page 10)

18 MENU (page 12)

19 RETURN (page 10)

20 ꢌ and ꢍ/ꢎ (page 13)

21 ꢄ (page 11)

ENTER

ꢈ

HOME

RETURN

STANDBY/ON

ꢃ

ꢄ

ꢆ

ꢅ

ꢇ

ꢊ/ꢋ

ꢉ

ꢎ/ꢍ

ꢌ

DV-370

13 12

11 15

ꢈ

ꢃ

ꢅ

ꢆ

ꢄ

PLAY MODE SURROUND ZOOM

DISPLAY

OPEN/CLOSE

ꢇ

ꢃ

ꢄ

ꢆ

ꢅ

ꢈ

22 ꢆ (page 11)

23 DISPLAY (page 16)

24 ZOOM (page 16)

STANDBY/ON

14 1312

DV-470

ꢂ STANDBY/ON (page 10)

Remote control sensor (page 9)

Disc tray

ꢇ OPEN/CLOSE (page 11)

Display

TOP MENU (page 12)

ENTER & cursor buttons (page 10)

MENU (page 12)

RETURN (page 12)

Using the remote control

Keep in mind the following when using the remote control:

• Make sure that there are no obstacles between the remote and the remote sensor on the unit.

• The remote has a range of about 7m.

• Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the

unit’s remote sensor.

• Remote controllers for different devices can interfere with each other. Avoid using remotes for

other equipment located close to this unit.

10 HOME MENU (page 10)

11 ꢈ (page 11)

• Replace the batteries when you notice a fall off in the operating range of the remote.

12 ꢅ (page 11)

13 ꢆ (page 11)

14 ꢃ and ꢄ (page 11)

15 RW Compatible (page 6)

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting started

Chapter 4

Button

What it does

Getting started

HOME MENU

ꢀ/ꢁ/ꢂ/ꢃ

ENTER

Display/exit the on-screen display.

Changes the highlighted menu item.

Switching on

Selects the highlighted menu item (both ENTER buttons on the remote work

in exactly the same way).

After making sure that everything is connected properly and that the player is plugged in, press ꢂ

STANDBY/ON on the front panel or remote control to switch the player on.

RETURN

Returns to the main menu without saving changes.

Also, switch on your TV and make sure that it is set to the input you connected the DVD player to.

ꢂ STANDBY/ON

Note

• From here on in this manual, the word ‘select’ generally means use the cursor buttons to

highlight an item on-screen, then press ENTER.

STANDBY/ON

ꢃ

ꢄ

Setting up the player for your TV

If you have a widescreen (16:9) TV, you should setup the player so that the picture will be presented

correctly. If you have a conevntional (4:3) TV, you can leave the player on the default setting and move

on to the next section.

DV-2750

FAQ

Press HOME MENU and select ‘Initial

• My DVD player switches on but there is nothing displayed on my TV.

Make sure that the TV is set to the correct video input (not a TV channel). For example, if you

connected this player to the VIDEO 1 inputs on your TV, switch your TV to VIDEO 1.

Initial Settings

Settings’.

Select ‘TV Screen’ from the ‘Video Output’

Initial Settings

settings.

Note

Digital Audio Out

Video Output

Language

4:3 (Letter Box)

4:3 (Pan&Scan)

16:9 (Wide)

TV Screen

• This player features a screen saver and an auto power off function. If the player is stopped and

no button is pressed for around five minutes, the screen saver starts. If the disc tray is closed

but no disc is playing and no control is pressed for about 30 minutes, the player automatically

goes into standby.

Component Out

S-Video Out

Display

Options

Using the on-screen displays

For ease of use, this player makes extensive use of graphical on-screen displays (OSDs).

All the screens are navigated in basically the same way, using the cursor buttons (ꢀ/ꢁ/ꢂ/ꢃ) to

change the highlighted item and pressing ENTER to select it.

If you have a widescreen (16:9) TV, select ‘16:9 (Wide)’.

If you have a conventional (4:3) TV, you can change the setting from 4:3 (Letter Box) to 4:3 (Pan &

Scan) if you prefer. See Video Output settings on page 18 for more details.

Press HOME MENU to exit the menu screen.

Setting the language of this player’s on-screen displays

ENTER

This sets the language of this system’s on-screen displays.

TOP MENU

OPEN/

ꢇ

Press HOME MENU and select ‘Initial

ENTER

HOME

Initial Settings

RETURN

Settings’.

ꢆ

ꢅ

ꢈ

ENTER

Select ‘OSD Language’ from the ‘Display’

Initial Settings

HOME

GMUEIN

RETURN

settings.

DV-2750

Digital Audio Out

Video Output

Language

OSD Language

On Screen Display

Angle Indicator

English

français

Deutsch

Italiano

Español

Display

Options

Select a language.

The on-screen language will change according to your selection.

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting started

Press HOME MENU to exit the menu screen.

Basic playback controls

The table below shows the basic controls on the remote for playing discs. The following chapter

covers other playback features in more detail.

Playing discs

The basic playback controls for playing DVD, CD, Video CD/Super VCD and MP3/WMA discs are

covered here. Further functions are detailed in the next chapter.

Button

What it does

ꢈ

Starts playback.

For details on playing JPEG picture discs, see Viewing a JPEG slideshow on page 13.

If the display shows RESUME or LAST MEM playback starts from the

resume or last memory point (see also Resume and Last Memory on

page 11.)

If the player isn’t already on, press

ꢂ STANDBY/ON to switch it on.

If you’re playing a DVD or Video CD/Super VCD, also turn on

your TV and make sure that it is set to the correct video input.

ꢅ

ꢆ

Pauses a disc that’s playing, or restarts a paused disc.

STANDBY/ON

OPEN/CLOSE

ꢇ

ꢂ

Stops playback.

See also Resume and Last Memory on page 11.

Press ꢇ OPEN/CLOSE to open the disc tray.

Load a disc.

ꢉ

(remote only)

Press to start fast reverse scanning. Press ꢈ (play) to resume normal

playback.

Load a disc with the label side facing up, using the disc tray

guide to align the disc (if you’re loading a double-sided DVD

disc, load it with the side you want to play face down).

ENTER

ꢌ

(remote only)

Press to start fast forward scanning. Press ꢈ (play) to resume normal

playback.

ꢃ

Skips to the start of the current track or chapter, then to previous tracks/

chapters.

ENTER

ꢄ

Skips to the next track or chapter.

ꢊ/ꢋ

ꢉ

ꢎ/ꢍ

ꢌ

Numbers

(remote only)

Use to enter a title/chapter/track number. Press ENTER to select.

• If the disc is stopped, playback starts from the selected title (for DVD) or

ꢈ

ꢃ

ꢅ

ꢆ

ꢄ

track (for CD/Video CD/Super VCD).

• If the disc is playing, playback jumps to the start of the selected title (VR

mode DVD-RW), chapter (DVD-Video) or track (CD/Video CD/Super VCD).

Resume and Last Memory

When you stop playback of a disc, RESUME is shown in the display indicating that you can resume

playback again from that point.

Press ꢈ (play) to start playback.

If the disc tray is not opened, the next time you start playback the display shows RESUME and

playback resumes from the resume point.

If you’re playing a DVD or Video CD/Super VCD, an on-screen menu may appear. See DVD-Video disc

menus on page 12 and Video CD/Super VCD PBC menus on page 12 for more on how to navigate

these.

With DVDs and Video CDs, if you take the disc out of the player, the play position is stored in memory.

If the next disc you load is the same one, the display shows LAST MEM and playback will resume.

If you want to clear the resume point, press ꢆ (stop) while RESUME is displayed.

• If you’re playing an MP3/WMA disc, it may take a few seconds before playback starts.

Note

• You may find with some DVD discs that some playback controls don’t work in certain parts of

the disc. This is not a malfunction.

• The Last Memory function doesn’t work with VR format DVD-RW discs.

• If you don’t need the Last Memory function when you stop a disc, you can press ꢇ OPEN/CLOSE

to stop playback and open the disc tray.

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting started

DVD-Video disc menus

Button

What it does

Many DVD-Video discs feature menus from which you can select what you want to watch. They may

also give access to additional features, such as subtitle and audio language selection, or special

features such as slideshows. See the disc packaging for details.

RETURN

Displays the PBC menu.

Sometimes DVD-Video menus are displayed automatically when you start playback; others only

appear when you press MENU or TOP MENU.

Numbers

(remote only)

Use to enter a numbered menu option. Press ENTER to select.

ꢃ

ꢄ

Displays the previous menu page (if there is one).

Displays the next menu page (if there is one).

ENTER

TOP MENU

FAQ

• After I load a DVD disc, it ejects automatically after a few seconds!

Most likely, the disc is the wrong region for your player. The region number should be printed on

the disc; check it against the region number of the player (which you can find on the rear panel).

See also DVD-Video regions on page 21.

ENTER

RETURN

If the region number is OK, it may be that the disc is damaged or dirty. Clean the disc and look

for signs of damage. See also Taking care of your player and discs on page 20.

• Why won’t the disc I loaded play?

First check that you loaded the disc the right way up (label side up), and that it’s clean and

undamaged. See Taking care of your player and discs on page 20 for information on cleaning

discs.

If a disc loaded correctly won’t play, it’s probably an incompatible format or disc type, such as

DVD-Audio or DVD-ROM. See Disc / content format playback compatibility on page 6 for more on

disc compatibility.

• I have a widescreen TV so why are there black bars at the top and bottom of the screen when I play

some discs?

Some movie formats are such that even when played on a widescreen TV, black bars are

necessary at the top and bottom of the screen. This is not a malfunction.

• I have a standard (4:3) TV and set the player to show widescreen DVDs in pan & scan format, so

why do I still get black bars top and bottom with some discs?

Some discs override the display preferences of the player, so even if you have 4:3 (Pan & Scan)

selected, those discs will still be shown in letter box format. This is not a malfunction.

Button

What it does

TOP MENU

Displays the ‘top menu’ of a DVD disc—this varies with the disc.

Displays a DVD disc menu—this varies with the disc and may be the same

as the ‘top menu’.

ꢀ/ꢁ/ꢂ/ꢃ

ENTER

Moves the cursor around the screen.

Selects the current menu option.

RETURN

Returns to the previously displayed menu screen.

Numbers

(remote only)

Highlights a numbered menu option (some discs only). Press ENTER to

select.

Video CD/Super VCD PBC menus

Some Video CD/Super VCDs have menus from which you can choose what you want to watch. These

are called PBC (Playback control) menus.

You can play a PBC Video CD/Super VCD without having to navigate the PBC menu by starting

playback using a number button to select a track, rather than the ꢈ (play) button.

ENTER

RETURN

ꢃ

ꢄ

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing discs

Chapter 5

Viewing a JPEG slideshow

After loading a CD/CD-R/RW containing JPEG picture files, press ꢈ (play) to start a slideshow from

the first folder/picture on the disc. The player displays the pictures in each folder in alphabetical

order.

Playing discs

Note

Pictures are automatically adjusted so that they fill as much of the screen as possible (if the aspect

ratio of the picture is different to your TV screen you may notice black bars at the sides, or at the top

and bottom of the screen).

• Many of the functions covered in this chapter apply to DVD discs, Video CDs/Super VCDs, CDs

and MP3/JPEG discs, although the exact operation of some varies slightly with the kind of disc

loaded.

• Some DVDs restrict the use of some functions (random or repeat, for example) in some or all

parts of the disc. This is not a malfunction.

• When playing Video CD/Super VCDs, some of the functions are not available during PBC

playback. If you want to use them, start the disc playing using a number button to select a track.

While the slideshow is running:

Button

ꢅ

What it does

Pauses the slideshow; press again to restart.

Displays the previous picture.

Displays the next picture.

ꢃ

ꢄ

Scanning discs

You can fast-scan discs forward or backward at four different speeds.

Pauses the slideshow and rotates the displayed picture 90º

(counter)clockwise. (Press ꢈ (play) to restart slideshow).

ꢂ/ꢃ

During playback, press ꢉ or ꢌ to start scanning.

• There is no sound while scanning DVDs and Video CD/Super VCDs, and no subtitles while

scanning DVDs.

Pauses the slideshow and ﬂips the displayed picture horizontally or

vertically. (Press ꢈ (play) to restart slideshow).

ꢀ/ꢁ

Press repeatedly to increase the scanning speed.

• The scanning speed is shown on-screen.

To resume normal playback, press ꢈ (play).

• When scanning a Video CD/Super VCD playing in PBC mode or a WMA/MP3 track, playback

automatically resumes at the end or beginning of the track.

• Depending on the disc, normal playback may automatically resume when a new chapter is

reached on a DVD disc.

ZOOM

Pauses the slideshow and zooms the picture. Press again to toggle between

1x, 2x and 4x zoom. (Press ꢈ (play) to restart slideshow).

Displays the Disc Navigator screen (see below).

Note

• The time it takes for the player to load a file increases with large file sizes.

• Discs can contain up to 299 folders and up to 648 folders and files combined.

Playing in slow motion

Browsing video content with the Disc Navigator

Use the Disc Navigator to browse through the contents of a DVD or Video CD/Super VCD disc to find

the part you want to play.

You can play DVDs at four different slow motion speeds, forwards and backwards. Video CD/Super

VCDs can be played at four different forward slow motion speeds.

During playback, press ꢅ (pause).

Press and hold ꢊ/ꢋ or ꢎ/ꢍ until slow motion playback starts.

• The slow motion speed is shown on-screen.

• There is no sound during slow motion playback.

Important

• You can’t use the Disc Navigator with Video CD/Super VCDs in PBC mode.

Press repeatedly to change the slow motion speed.

To resume normal playback, press ꢈ (play).

• Depending on the disc, normal playback may automatically resume when a new chapter is

reached.

During playback, press HOME MENU and

select ‘Disc Navigator’ from the on-screen

menu.

Disc Navigator

Select a view option.

Disc Navigator

Title

Frame advance/frame reverse

You can advance or back up DVD discs frame-by-frame. With Video CD/Super VCDs you can only use

frame advance.

Chapter

The options available depend on the kind of disc loaded and whether the disc is playing or not, but

include:

During playback, press ꢅ (pause).

Press ꢊ/ꢋ or ꢎ/ꢍ to reverse or advance a frame at a time.

To resume normal playback, press ꢈ (play).

• Depending on the disc, normal playback may automatically resume when a new chapter is

reached.

• Title – Titles from a DVD-Video disc.

• Chapter – Chapters from the current title of a DVD-Video disc.

• Track – Tracks from a Video CD/Super VCD disc.

• Time – Thumbnails from a Video CD/Super VCD disc at 10 minute intervals.

• Original: Title – Original titles from a VR mode DVD-RW disc.

• Playlist: Title – Playlist titles from a VR mode DVD-RW disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing discs

• Original: Time – Thumbnails from the Original content at 10 minute intervals.

• Playlist: Time – Thumbnails from the Playlist at 10 minute intervals.

The screen shows up to six moving thumbnail images displayed one after another. To display the

previous/next six thumbnails, press ꢃ/ꢄ (you don’t have to wait for all the thumbnails to finish

playing to display the previous/next page).

Tip

• To play the contents of the whole disc rather than just the current folder, exit the Disc Navigator

and start playback using the ꢈ (play) button.

Select the thumbnail image for what you

Looping a section of a disc

want to play.

The A-B Repeat function allows you to specify two points (A and B) within a track (CD, Video CD/

Super VCD) or title (DVD) that form a loop which is played over and over.

You can use either the cursor buttons (ꢀ/ꢁ/ꢂ/

ꢃ) and ENTER to select a thumbnail, or the

number buttons.

To select using the number buttons, enter a two-

digit number then press ENTER.

• You can’t use A-B Repeat with Video CD/Super VCDs in PBC mode, or WMA /MP3 files.

During playback, press PLAY MODE and

Play Mode

select ‘A-B Repeat’ from the list of functions

on the left.

A-B Repeat

A(Start Point)

B(End Point)

Off

Disc Navigator: Title

01- 49: --

Repeat

Random

Program

Search Mode

Tip

• Another way to find a particular place on a disc is to use one of the search modes. See Searching

a disc on page 15.

Press ENTER on ‘A(Start Point)’ to set the loop start point.

Press ENTER on ‘B(End Point)’ to set the loop end point.

After pressing ENTER, playback jumps back to the start point and plays the loop.

Browsing WMA, MP3 and JPEG files with the Disc Navigator

Use the Disc Navigator to find a particular file or folder by filename.

To resume normal playback, select ‘Off’ from the menu.

Press HOME MENU and select ‘Disc

00:00/ 00:00

0kbps

Using repeat play

Navigator’ from the on-screen menu.

There are various repeat play options, depending on the kind of disc loaded. It’s also possible to use

repeat play together with program play to repeat the tracks/chapters in the program list (see Creating

a program list on page 15).

Folder1

Folder2

Folder3

Folder4

Important

• You can’t use Repeat play with Video CD/Super VCDs in PBC mode, or with WMA/MP3 discs.

• You can’t use repeat and random play at the same time.

During playback, press PLAY MODE and

Play Mode

Use the cursor buttons (ꢀ/ꢁ/ꢂ/ꢃ) and

select ‘Repeat’ from the list of functions on

the left.

00:00/ 00:00

Folder2

0kbps

ENTER to navigate.

A-B Repeat

Title Repeat

Chapter Repeat

Repeat Off

Use the cursor up/down buttons (ꢀ/ꢁ) to move

up and down the folder/file list.

Use the cursor left button (ꢂ) to return to the

parent folder.

Use ENTER or cursor right (ꢃ) to open a

highlighted folder.

Repeat

Random

Program

Search Mode

File1

File2

File3

File4

File5

• You can also return to the parent folder by

going to the top of the list to the ‘..’ folder,

then pressing ENTER.

• When a JPEG file is highlighted, a thumbnail

image is displayed on the right.

To play the highlighted track or display the highlighted JPEG file, press ENTER.

• When a WMA/MP3 file is selected, playback begins, starting with the selected track, and

continues until the end of the folder.

• When a JPEG file is selected, a slideshow begins, starting with that file, and continues to the end

of the folder.

Select a repeat play option.

Play Mode

If program play is active, select Program Repeat

to repeat the program list, or Repeat Off to

cancel.

The repeat options available depend on the kind of

disc loaded. For example, for DVD discs, you can

select Title Repeat or Chapter Repeat (or

Repeat Off).

A-B Repeat

Repeat

Title Repeat

Chapter Repeat

Repeat Off

Random

Program

Search Mode

• For CDs and Video CD/Super VCDs, select Disc Repeat or Track Repeat (or Repeat Off).

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing discs

Using random play

Use the random play function to play titles or chapters (DVD-Video) or tracks (CD, Video CD/Super

VCD) at random. (Note that the same track/title/chapter may play more than once.)

You can set the random play option when a disc is playing or stopped.

Press PLAY MODE and select ‘Program’

Play Mode

from the list of functions on the left.

A-B Repeat

Create/Edit

Repeat

Playback Start

Playback Stop

Program Delete

Random

Program

Search Mode

Important

• Random play remains in effect until you select Random Off from the random play menu

options.

• You can’t use random play with VR format DVD-RW discs, Video CD/Super VCDs playing in PBC

mode, WMA/MP3 discs, or while a DVD disc menu is being displayed.

• You can't use random play together with program or repeat play.

Select ‘Create/Edit’ from the list of program options.

Use the cursor buttons and ENTER to

Program

select a title, chapter or track for the current

step in the program list.

For a DVD disc, you can add a title or a chapter to

the program list.

Program Step

Title 1~38

Chapter 1~4

Press PLAY MODE and select ‘Random’

Play Mode

01. 01

02.

Title 01

Title 02

Title 03

Title 04

Title 05

Title 06

Title 07

Title 08

Chapter 001

Chapter 002

Chapter 003

Chapter 004

from the list of functions on the left.

03.

A-B Repeat

Random Title

Random Chapter

Random Off

04.

Repeat

05.

Random

06.

Program

Search Mode

• For a CD or Video CD/Super VCD, select a

track to add to the program list.

07.

08.

After pressing ENTER to select the title/chapter/track, the step number automatically moves down

one.

Select a random play option.

Play Mode

Repeat step 3 to build up a program list.

The random play options available depend on the

kind of disc loaded. For example, for DVD discs,

you can select Random Title or Random

Chapter, (or Random Off).

A program list can contain up to 24 titles/chapters/tracks.

A-B Repeat

Repeat

Random Title

Random Chapter

Random Off

• You can insert steps into the middle of a program list by just highlighting the position where you

want the new step to appear and enetering a title/chapter/track number.

• To delete a step, highlight it and press CLEAR.

Random

Program

Search Mode

• For CDs and Video CD/Super VCDs, select On

or Off to switch random play on or off.

To play the program list, press ꢈ (play).

Program play remains active until you turn off program play (see below), erase the program list (see

below), eject the disc or switch off the player.

Tip

• Use the following controls during random play:

• Use the following controls during program play:

Button

ꢄ

What it does

Selects a new track/title/chapter at random.

Button

What it does

PLAY MODE

Save the program list and exit the program edit screen without starting

playback (HOME MENU does the same).

ꢃ

Returns to the beginning of the current track/title/chapter; further presses

select another random track/title/chapter.

ꢄ

Skip to the next step in the program list.

Creating a program list

Other functions available from the program menu

This feature lets you program the play order of titles/chapters/tracks on a disc.

There are a number of other options in the program menu in addition to Create/Edit.

• Playback Start – Starts playback of a saved program list

Important

• Playback Stop – Turns off program play, but does not erase the program list

• Program Delete – Erases the program list and turns off program play

• You can’t use Program play with VR format DVD-RW discs, Video CD/Super VCDs playing in

PBC mode, WMA/MP3 discs, or while a DVD disc menu is being displayed.

Searching a disc

You can search DVD discs by title or chapter number, or by time; CDs and Video CD/Super VCDs by

track number or time.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing discs

Important

Zooming the screen

Using the zoom feature you can magnify a part of the screen by a factor of 2 or 4, while watching a

DVD or Video CD/Super VCD or playing a JPEG disc.

• Search functions are not available with Video CD/Super VCDs in PBC mode, or with WMA/MP3

discs.

Press PLAY MODE and select ‘Search Mode’ from the list of functions on the left.

The search options available depend on the kind of disc loaded.

Select a search mode.

• The disc must be playing in order to use time search.

During playback, use the ZOOM button to select the zoom factor (Normal, 2x or 4x).

• Since DVD, Video CD/Super VCD and JPEG pictures have a fixed resolution, picture quality will

deteriorate, especially at 4x zoom. This is not a malfunction.

Use the cursor buttons to change the zoomed area.

You can change the zoom factor and the zoomed area freely during playback.

• If the navigation square at the top of the screen disappears, press ZOOM again to display it.

Use the number buttons to enter a title,

Play Mode

chapter or track number, or a time.

• For a time search, enter the number of

minutes and seconds into the currently

playing title (DVD) or track (CD/Video CD/

Super VCD) you want playback to resume

from. For example, press 4, 5, 0, 0 to have

playback start from 45 minutes into the disc.

For 1 hour, 20 minutes and 30 seconds, press

8, 0, 3, 0.

A-B Repeat

Title Search

Input Chapter

Switching camera angles

Repeat

Chapter Search

Time Search

Random

Some DVD discs feature scenes shot from two or more angles—check the disc box for details.

Program

Search Mode

When a multi-angle scene is playing, a

are available (this can be switched off if you prefer—see Display settings on page 19).

During playback (or when paused), press ANGLE to switch angle.

icon appears on screen to let you know that other angles

Displaying disc information

Press ENTER to start playback.

Various track, chapter and title information, such as the elapsed and remaining playing time can be

displayed on-screen while a disc is playing.

Switching subtitles

Some DVD discs have subtitles in one or more languages; the disc box will usually tell you which

subtitle languages are available. You can switch subtitle language during playback.

To show/switch/hide the information displayed, press DISPLAY repeatedly.

• When a disc is playing, the information appears at the top of the screen.

Press SUBTITLE repeatedly to select a subtitle option.

Current / Total

1/2

Subtitle

English

Note

• Some discs only allow you to change subtitle language from the disc menu. Press TOP MENU

or MENU to access.

• To set subtitle preferences, see Language settings on page 18.

Switching audio language/channel

When playing a DVD disc recorded with dialog in two or more languages, you can switch audio

language during playback.

When playing a VR format DVD-RW disc recorded with dual-mono audio, you can switch between

the main, sub, and mixed channels during playback.

When playing a Video CD/Super VCD, you can switch between stereo, just the left channel or just

the right channel.

Press AUDIO repeatedly to select an audio language/channel option.

The language/channel information is shown on-screen.

Note

• Some DVD discs only allow you to change audio language from the disc menu. Press TOP

MENU or MENU to access.

• To set DVD audio language preferences, see Language settings on page 18.

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Settings and Video Adjust menus

• How good the surround effect is varies with the disc.

Chapter 6

Audio Settings and Video Adjust menus

Dialog Enhancer

• Settings: High, Medium, Low, Off (default)

The Dialog Enhancer feature is designed to make the dialog stand out from other background

sounds in the soundtrack.

Audio Settings menu

The Audio Settings menu offers features for adjusting the way discs sound.

Press HOME MENU and select ‘Audio

Equalizer (DV-2750/DV-370 only)

Audio Settings

Settings’ from the on-screen display.

• Settings: Rock, Pop, Live, Dance, Techno, Classic, Soft, Off (default)

The various preset EQ curves are designed to suit various styles of music.

Select and change settings using the ꢀ/ꢁ/

Audio Settings

Equalizer

ꢂ/ꢃ (cursor) buttons, and ENTER.

Off

Note

Virtual Surround

Audio DRC

Dialog

• 96kHz linear PCM audio is automatically downsampled to 48kHz if the Equalizer is switched on.

Video Adjust menu (DV-470 only)

From the Video Adjust screen you can adjust various settings that affect how the picture is

presented.

DV-2750/DV-370

Press HOME MENU and select ‘Video

Video Adjust

Audio DRC

Adjust’ from the on-screen display.

• Settings: High, Medium, Low, Off (default)

Make settings using the

When watching Dolby Digital DVDs at low volume, it’s easy to lose the quieter sounds completely—

including some of the dialog. Switching Audio DRC (Dynamic Range Control) to on can help by

bringing up the quieter sounds, while controlling loud peaks.

How much of a difference you hear depends on the material you’re listening to. If the material

doesn’t have wide variations in volume, you may not notice much change.

Video Adjust

Sharpness

ꢀ/ꢁ/ꢂ/ꢃ (cursor) buttons, and ENTER.

ꢈ

Standard

Brightness

Contrast

Gamma

Hue

Off

Chroma Level

BNR

Off

Note

• Audio DRC is only effective with Dolby Digital audio sources.

DV-470

• Audio DRC is only effective through the digital output when Digital Out is set to On, and Dolby

Digital Out is set to Dolby Digital > PCM (see Digital Audio Out settings on page 18).

• The effect of Audio DRC depends on your speakers and AV receiver settings.

You can adjust the following picture quality settings:

• Sharpness – Adjusts the sharpness of edges in the picture (Fine, Standard, Soft).

• Brightness – Adjusts the overall brightness (–20 to +20).

• Contrast – Adjusts the contrast between light and dark (–16 to +16).

• Gamma – Adjusts the ‘warmth’ of the picture (High, Medium, Low, Off).

• Hue – Adjusts the red/green balance (Green 9 to Red 9).

• Chroma Level – Adjusts how saturated colors appear (–9 to +9).

• BNR – Switches on/off block noise reduction (On, Off (default)).

Adjust the Brightness, Contrast, Hue and Chroma Level settings using the ꢂ/ꢃ (cursor left/right)

buttons.

Virtual Surround

• Settings: On, Off (default)

Switch on Virtual Surround to enjoy surround sound effects from just two speakers.

Virtual surround can produce realistic 3D sound from a pair of stereo speakers using any source.

Tip

Brightness

min

max

• You can also use the SURROUND button on the remote control to switch Virtual Surround on.

Press ENTER to save your settings and exit the Video Adjust screen.

Note

• DV-2750/DV-370 only: Virtual Surround doesn’t work with WMA or DTS, through either the analog

or digital outputs.

• 96kHz linear PCM audio is automatically downsampled to 48kHz if Virtual Surround is switched

on.

• If the player is outputting Dolby Digital or MPEG bitstream audio (in other words, no conversion

to PCM), Virtual Surround has no effect on the audio from the digital output. See Digital Audio

Out settings on page 18 for how to set up the digital output formats.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Settings menu

Chapter 7

Video Output settings

Initial Settings menu

Setting

Option

What it means

TV Screen

(See also

Screen sizes

and disc

formats on

page 20.)

4:3 (Letter Box)

Set if you have a conventional 4:3 TV. Widescreen movies are

shown with black bars top and bottom.

Using the Initial Settings menu

4:3 (Pan & Scan)

Set if you have a conventional 4:3 TV. Widescreen movies are

shown with the sides cropped so that the image ﬁlls the

screen.

The Initial Settings menu provides audio and video output settings, parental lock settings, and

display settings, among others.

If an option is grayed out it means that it cannot be changed at the current time. This is usually

because a disc is playing. Stop the disc, then change the setting.

16:9 (Wide)

Interlace

Set if you have a widescreen TV.

Press HOME MENU and select ‘Initial

Compo-

nent Out

Set if your TV is not compatible with progressive scan video.

Initial Settings

Settings’.

Progressive

Set if your TV is compatible with progressive scan video (see

your TV’s instruction manual for details). See also Switching

the video output to interlace using the front panel controls on

page 8.

DV-470 only: Note that progressive scan video is only output

from the component video jacks.

DV-2750/DV-370 only: Note that progressive scan video is only

output from the component video jacks and that there is no

output from the composite and S-video jacks when this setting

is selected.

Use the cursor buttons and ENTER to select the setting and option you want to set.

All the settings and options are explained on the following pages.

Note

• In the table below, the default setting is shown in bold: other settings are shown in italics.

• The Digital Audio Out settings only need to be set if you have connected the digital output of this

player to an AV receiver, or other equipment.

• Check the operating instructions supplied with your other equipment to see which digital audio

formats it’s compatible with.

• Some settings, such as TV Screen, Audio Language and Subtitle Language may be

overridden by the DVD disc. Often these settings can also be made from the DVD disc menu.

AV Connec- Video

tor Out

Ordinary (composite) video output, compatible with all TVs.

S-Video

Almost the same quality as RGB, but can give better results if

you’re using a long SCART cable.

Digital Audio Out settings

RGB

If your TV is compatible, this setting gives the best picture

quality.

Setting

Option

What it means

Digital Out On

Digital audio is output from the digital outputs.

No digital audio output.

Language settings

Off

Setting

Option

What it means

Dolby

Dolby Digital encoded digital audio is output when playing a

Dolby Digital DVD disc.

Digital Out Digital

Audio Lan- English

guage

If there is an English soundtrack on the disc then it will be

played.

Dolby Digital >

PCM

Dolby Digital audio is converted to PCM audio before being

output.

Languages as dis-

played

If there is the language selected on the disc, then it will be

played.

DTS Out

DTS

DTS encoded digital audio is output when playing a DTS disc.

(Noise will be output if your ampliﬁer/receiver is not

compatible with DTS audio.)

Other Language

Select to choose a language other than the ones displayed

(see page 21).

Off

No digital audio is output when playing a DTS disc.

96kHz digital audio is converted to 48kHz for digital output.

96kHz digital audio is output as is at 96kHz.

Subtitle

Language

English

If there is are English subtitles on the disc then they will be

displayed.

96 kHz Out 96kHz > 48kHz

96kHz

Languages as dis-

played

If there is the subtitle language selected on the disc, then it

will be displayed.

MPEG Out MPEG > PCM

MPEG encoded digital audio is converted to PCM audio for

digital output.

Other Language

Select to choose a language other than the ones displayed

(see page 21).

MPEG

MPEG encoded digital audio is output as is.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Settings menu

Use the number buttons to enter a 4-digit password.

The numbers you enter show up as asterisks (*) on-screen.

Press ENTER to register the password.

Setting

Option

What it means

DVD Menu w/Subtitle Lang.

Language

DVD disc menus will be displayed in the same language as

your selected subtitle language, if possible.

You will return to the Options menu screen.

Languages as dis-

played

DVD disc menus will be displayed in the selected language, if

possible.

Changing your password

To change your password, confirm your existing password then enter a new one.

Other Language

Select to choose a language other than the ones displayed

(see page 21).

Select ‘Password Change’.

Use the number buttons to enter your existing password, then press ENTER.

Enter a new password and press ENTER.

Subtitle

Display

Subtitles are displayed according to your selected subtitle

language (see above).

This registers the new password and you will return to the Options menu screen.

Off

Subtitles are always off by default when you play a DVD disc

(note that some discs override this setting).

Setting/changing the Parental Lock

Select ‘Level Change’.

Use number buttons to enter your password, then press ENTER.

Select a new level and press ENTER.

• Press ꢂ(cursor left) repeatedly to lock more levels (more discs will require the password); press

ꢃ (cursor right) to unlock levels. You can’t lock level 1.

Display settings

Setting

Option

What it means

OSD Lan-

guage

English

On-screen displays of the player are in English.

On-screen displays are shown in the language selected.

This sets the new level and you will return to the Options menu screen.

Languages as dis-

played

Setting/changing the Country code

You can find the Country code list on page 22.

Angle Indi- On

cator

A camera icon is displayed on-screen during multi-angle

scenes on a DVD disc.

Select ‘Country Code’.

Use number buttons to enter your password, then press ENTER.

Select a Country code and press ENTER.

Off

No multi-angle indication is shown.

There are two ways you can do this:

Parental Lock

• Select by code letter: Use ꢀ/ꢁ (cursor up/down) to change the Country code.

• Select by code number: Press ꢃ(cursor right) then use the number buttons to enter the 4-digit

Country code.

• Default level: Off; Default password: none; Default Country code: us (2119)

To give you some control over what your children watch on your DVD player, some DVD-Video discs

feature a Parental Lock level. If your player is set to a lower level than the disc, the disc won’t play.

Some discs also support the Country Code feature. The player does not play certain scenes on these

discs, depending on the Country Code you set.

The new Country code is set and you will return to the Options menu screen. Note that the new

Country code doesn’t take effect until the next disc is loaded (or the current disc is reloaded).

Note

• Not all discs use Parental Lock, and will play without requiring the password first.

• If you forget your password, you’ll need to reset the player to register a new password. (see

Resetting the player on page 21)

Registering a new password

You must register a password before you can change the Parental Lock level or enter a Country code.

Select ‘Password’.

Initial Settings

Digital Audio Out

Video Output

Language

Parental Lock

Password

Level Change

Country Code

Display

Options

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional information

If you use a chemical-impregnated cleaning cloth, read the instructions carefully before use. These

cloths may leave smear marks on half-mirror finish surfaces; if this happens, finish with a dry cloth.

Chapter 8

Additional information

Cleaning the pickup lens

The DVD player’s lens should not become dirty in normal use, but if for some reason it should

malfunction due to dust or dirt, consult your nearest Pioneer-authorized service center. We do not

recommend using commercially available lens cleaners for CD players.

Taking care of your player and discs

General

Condensation

Hold discs by the edge or by the center hole and edge.

Condensation may form inside the player if it is brought into a warm room from outside, or if the

temperature of the room rises quickly. Although the condensation won’t damage the player, it may

temporarily impair its performance. Leave it to adjust to the warmer temperature for about an hour

before switching on.

When you're not using a disc, return it to its case and store upright. Avoid leaving discs in excessively

cold, humid, or hot environments (including under direct sunlight).

Don't glue paper or put stickers on to discs. Do not use a pencil, ball-point pen or other sharp-tipped

writing instrument to write on the disc.

Don’t use self-adhesive disc labels on discs as

these can cause the disc to warp slightly during

playback causing distortion in the picture and/or

sound.

Moving the player

If you need to move the player, first press ꢂ STANDBY/ON on the front panel to turn the player off.

Wait for -OFF- to disappear from the display, then unplug the power cable. Never lift or move the unit

during playback—discs rotate at a high speed and may be damaged.

Screen sizes and disc formats

Damaged and shaped discs

DVD-Video discs come in several different screen aspect ratios, ranging from TV programs, which

are generally 4:3, to CinemaScope widescreen movies, with an aspect ratio of up to about 7:3.

Televisions, too, come in different aspect ratios; ‘standard’ 4:3 and widescreen 16:9.

Do not use cracked, chipped, warped, or otherwise damaged discs as they may damage the player.

This player is designed to be used only with

conventional, fully circular discs. Do not use

shaped discs. Pioneer disclaims all liability arising

in connection with the use of shaped discs.

Widescreen TV users

If you have a widescreen TV, the TV Screen setting (page 18) of this player should be set to 16:9

(Wide).

When you watch discs recorded in 4:3 format, you can use the TV controls to select how the picture

is presented. Your TV may offer various zoom and stretch options; see the instructions that came with

your TV for details.

Please note that some movie aspect ratios are wider than 16:9, so even though you have a

widescreen TV, these discs will still play in a ‘letter box’ style with black bars at the top and bottom

of the screen.

Cleaning discs

Fingerprints and dist on discs can affect playback performance. Clean using a soft, dry cloth, wiping

the disc lightly from the center to the outside edge as shown below.

Standard TV users

If necessary, use a cloth soaked in alcohol, or a

commercially available CD/DVD cleaning kit to

clean a disc more thoroughly. Never use benzine,

thinner or other cleaning agents, including

products designed for cleaning vinyl records.

If you have a standard TV, the TV Screen setting (page 18) of this player should be set to 4:3 (Letter

Box) or 4:3 (Pan&Scan), depending on which you prefer.

Set to 4:3 (Letter Box), widescreen discs are

shown with black bars top and bottom.

Cleaning the unit’s exterior

Unplug the unit before cleaning.

Set to 4:3 (Pan&Scan), widescreen discs are

shown with the left and right sides cropped.

Although the picture looks larger, you don’t

actually see the whole picture.

Use a dry cloth to wipe off dust and dirt. If the surfaces are very dirty, wipe with a soft cloth dipped

in some neutral cleanser diluted five or six times with water and wrung out well, then wipe again with

a dry cloth.

Do not use use furniture wax or cleaners. Never use thinners, benzine or insecticide sprays or other

chemicals on or near this unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional information

Please note that many widescreen discs override the player’s settings so that the disc is shown in

letter box format regardless of the setting.

Press and hold the front panel ꢂ STANDBY/ON for 10 seconds.

When the power is completely off, you cannot use the remote to switch it back on again. Use the

front panel ꢂ STANDBY/ON button.

Note

• Using the 16:9 (Wide) setting with a standard 4:3 TV, or either of the 4:3 settings with a

widescreen TV, will result in a distorted picture.

DVD-Video regions

All DVD-Video discs carry a region mark on the case somewhere that indicates which region(s) of

the world the disc is compatible with. Your DVD player also has a region mark, which you can find

on the rear panel. Discs from incompatible regions will not play in this player. Discs marked ALL will

play in any player.

Setting the TV system

The default setting of this player is AUTO, and unless you notice that the picture is distorted when

playing some discs, you should leave it set to AUTO. If you experience picture distortion with some

discs, set the TV system to match your country or region’s system. Doing this, however, may restrict

the kinds of disc you can watch. The table below shows what kinds of disc are compatible with each

setting (AUTO, PAL and NTSC).

The diagram below shows the various DVD regions of the world.

If the player is on, press ꢂ STANDBY/ON to switch it to standby.

Using the front panel controls, hold down ꢄ then press ꢂ STANDBY/ON to switch the

TV system.

The TV system changes as follows:

• AUTO ꢄ NTSC

• NTSC ꢄ PAL

• PAL ꢄ AUTO

Selecting languages using the language code list

Some of the language options (such as ‘DVD Language’ in the Setup Navigator) allow you to set your

prefered language from any of the 136 languages listed in the language code list on page 22.

Note

• You have to switch the player into standby (press ꢂ STANDBY/ON) before each change.

Select ‘Other Language’.

Use the ꢂ/ꢃ (cursor left/right) buttons to select either a code letter or a code number.

Use the ꢀ/ꢁ (cursor up/down) buttons to select a code letter or a code number.

Disc

Player setting

NTSC

Type

Format

PAL

AUTO

NTSC

See Language code list on page 22 for a complete list of languages and codes.

DVD/Super VCD NTSC

PAL

NTSC

PAL

Video CD

NTSC

PAL

—

NTSC

PAL

CD/

no disc

NTSC

NTSC or PAL

Resetting the player

Use this procedure to reset all the player’s settings to the factory default.

Switch the player into standby.

Using the front panel buttons,

hold down the ꢆ (stop) button and press

ꢂ STANDBY/ON to switch the player back on.

All the player’s settings are now reset.

Power reset

Use this procedure to switch the power off if the player is unresponsive to any control from the front

panel or remote.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional information

Glossary

Analog audio

Language code list

Language (Language code letter), Language code

Direct representation of sound by an electrical signal. See also Digital audio.

Aspect ratio

The width of a TV screen relative to its height. Conventional TVs are 4:3;

widescreen models are 16:9.

Japanese (ja), 1001

English (en), 0514

French (fr), 0618

Bhutani (dz), 0426

Esperanto (eo), 0515

Estonian (et), 0520

Basque (eu), 0521

Persian (fa), 0601

Finnish (fi), 0609

Kirghiz (ky), 1125

Sinhalese (si), 1909

Slovak (sk), 1911

Slovenian (sl), 1912

Samoan (sm), 1913

Shona (sn), 1914

Somali (so), 1915

Albanian (sq), 1917

Serbian (sr), 1918

Siswati (ss), 1919

Sesotho (st), 1920

Sundanese (su), 1921

Swahili (sw), 1923

Tamil (ta), 2001

Latin (la), 1201

Lingala (ln), 1214

Laothian (lo), 1215

Lithuanian (lt), 1220

Latvian (lv), 1222

Malagasy (mg), 1307

Maori (mi), 1309

Digital audio

Dolby Digital

Indirect representation of sound using numbers. See also Sampling

frequency and Analog audio.

German (de), 0405

Italian (it), 0920

Spanish (es), 0519

Chinese (zh), 2608

Dutch (nl), 1412

A multi-channel audio encoding system developed by Dolby Laboratories

that enables far more audio to be stored on a disc than PCM encoding. See

also PCM (Pulse Code Modulation).

Fiji (fj), 0610

Faroese (fo), 0615

Frisian (fy), 0625

Irish (ga), 0701

Scots-Gaelic (gd), 0704

Galician (gl), 0712

Guarani (gn), 0714

Gujarati (gu), 0721

Hausa (ha), 0801

Hindi (hi), 0809

Croatian (hr), 0818

Hungarian (hu), 0821

Armenian (hy), 0825

Interlingua (ia), 0901

Interlingue (ie), 0905

Inupiak (ik), 0911

Indonesian (in), 0914

Icelandic (is), 0919

Hebrew (iw), 0923

Yiddish (ji), 1009

Javanese (jw), 1023

Georgian (ka), 1101

Kazakh (kk), 1111

Greenlandic (kl), 1112

Cambodian (km), 1113

Kannada (kn), 1114

Kashmiri (ks), 1119

Kurdish (ku), 1121

Portuguese (pt), 1620

Swedish (sv), 1922

Russian (ru), 1821

Korean (ko), 1115

Greek (el), 0512

Macedonian (mk), 1311

Malayalam (ml), 1312

Mongolian (mn), 1314

Moldavian (mo), 1315

Marathi (mr), 1318

Malay (ms), 1319

Maltese (mt), 1320

Burmese (my), 1325

Nauru (na), 1401

DRM

DRM (Digital Rights Management) copy protection is a technology designed

to prevent unauthorized copying by restricting playback, etc. of material on

devices other the PC (or other WMA recording equipment) used to record it.

For detailed information, please see the instruction manuals or help ﬁles that

came with your PC (or other WMA recording equipment) and/or software.

Afar (aa), 0101

Telugu (te), 2005

Tajik (tg), 2007

Abkhazian (ab), 0102

Afrikaans (af), 0106

Amharic (am), 0113

Arabic (ar), 0118

Assamese (as), 0119

Aymara (ay), 0125

Azerbaijani (az), 0126

Bashkir (ba), 0201

Byelorussian (be), 0205

Bulgarian (bg), 0207

Bihari (bh), 0208

Bislama (bi), 0209

Bengali (bn), 0214

Tibetan (bo), 0215

Breton (br), 0218

Catalan (ca), 0301

Corsican (co), 0315

Czech (cs), 0319

Thai (th), 2008

Tigrinya (ti), 2009

Turkmen (tk), 2011

Tagalog (tl), 2012

Setswana (tn), 2014

Tonga (to), 2015

Turkish (tr), 2018

Tsonga (ts), 2019

Tatar (tt), 2020

Nepali (ne), 1405

Norwegian (no), 1415

Occitan (oc), 1503

Oromo (om), 1513

Oriya (or), 1518

DTS

A multi-channel audio encoding system developed by Digital Theater

Systems that enables far more audio to be stored on a disc than PCM

encoding. See also PCM (Pulse Code Modulation).

Panjabi (pa), 1601

Polish (pl), 1612

Pashto, Pushto (ps), 1619

Quechua (qu), 1721

Twi (tw), 2023

Ukrainian (uk), 2111

Rhaeto-Romance (rm), 1813 Urdu (ur), 2118

EXIF(Exchangeable A ﬁle format developed by Fuji Photo Film for digital still cameras. Digital

Image File)

Kirundi (rn), 1814

Uzbek (uz), 2126

Vietnamese (vi), 2209

Volapük (vo), 2215

Wolof (wo), 2315

Xhosa (xh), 2408

Yoruba (yo), 2515

Zulu (zu), 2621

Romanian (ro), 1815

Kinyarwanda (rw), 1823

Sanskrit (sa), 1901

Sindhi (sd), 1904

cameras from various manuafcturers use this compressed ﬁle format which

carries date, time and thumbnail information, as well as the picture data.

File extension

A tag added to the end of a ﬁlename to indicate the type of ﬁle. For example,

“.mp3” indicates an MP3 ﬁle.

Welsh (cy), 0325

Danish (da), 0401

Sangho (sg), 1907

Serbo-Croatian (sh), 1908

ISO 9660 format

JPEG

International standard for the volume and ﬁle structure of CD-ROM discs.

A standard ﬁle format used for still images. JPEG ﬁles are identiﬁed by the

ﬁle extension “.jpg”.

Country code list

Country, Country code, Country code letter

MP3

MP3 (MPEG1 audio layer 3) is a compressed stereo audio ﬁle format. Files

are recognized by their ﬁle extension “.mp3”.

Argentina, 0118, ar

Australia, 0121, au

Austria, 0120, at

Belgium, 0205, be

Brazil, 0218, br

Finland, 0609, fi

France, 0618, fr

Germany, 0405, de

Hong Kong, 0811, hk

India, 0914, in

Malaysia, 1325, my

Mexico, 1324, mx

Singapore, 1907, sg

Spain, 0519, es

MPEG audio

Netherlands, 1412, nl

New Zealand, 1426, nz

Norway, 1415, no

Sweden, 1905, se

Switzerland, 0308, ch

Taiwan, 2023, tw

Thailand, 2008, th

United Kingdom, 0702, gb

USA, 2119, us

An audio format used on Video CD/Super VCDs and some DVD discs.

PBC

A system of navigating a Video CD/Super VCD through on-screen menus

recorded onto the disc.

Canada, 0301, ca

Chile, 0312, cl

Indonesia, 0904, id

Italy, 0920, it

Pakistan, 1611, pk

Philippines, 1608, ph

Portugal, 1620, pt

(PlayBack Control)

China, 0314, cn

Denmark, 0411, dk

Japan, 1016, jp

Korea, Republic of, 1118, kr Russian Federation, 1821, ru

PCM

(Pulse Code

Modulation)

Digital audio encoding system found on CDs. Good quality, but requires a lot

of data compared to Dolby Digital, DTS and MPEG encoded audio. See also

Digital audio.

Progressive scan All the lines that make up a video picture are updated in one pass (compared

video

to interlace which takes two passes to update the whole picture).

Regions

These associate DVD-Video discs and players with particular areas of the

world. See DVD-Video regions on page 21 for more information.

Sampling

frequency

The rate at which sound is measured to be turned into digital audio data. The

higher the rate, the better the sound quality. CD is 44.1 kHz; DVD can be up

to 96 kHz. See also Digital audio.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional information

WMA

WMA is short for Windows Media Audio and refers to an audio compression

technology developed by Microsoft Corporation. Files are recognized by their

ﬁle extension “.wma”.

Microsoft, Windows Media, and the Windows logo are trademarks, or

registered trademarks of Microsoft Corporation in the United States and/or

other countries.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks

of Dolby Laboratories.

“DTS” and “DTS Digital Out” are registered trademarks of Digital Theater Systems, Inc.

AV connector output

AV Connector (21-pin connector assignment)

AV connector output ................... 21-pin connector

This connector provides the video and audio signals for connection to a compatible colour TV or

monitor.

PIN no.

1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Audio 2/R out

3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Audio 1/L out

4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B out

8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Status

11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G out

15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R or C out

17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND

19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Video out or Y out

21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND

Download from Www.Somanuals.com. All Manuals Search And Download.

DivX® video playback (DV-470 only)

Chapter 9

Playing DivX video

If a disc contains only DivX video files, you can start playback right away. The table below shows all

the basic playback controls.

DivX video playback (DV-470 only)

If a disc contains a mixture of DivX video and other media file types (MP3, for example), first select

whether to play the DivX video files (DivX) or the other media file types (MP3 / WMA / JPEG) from

the on-screen display.

About DivX

DivX is a compressed digital video format created by the DivX video codec from DivXNetworks, Inc.

Note

This player can play DivX video files burned on CD-R/RW/ROM discs. Keeping the same terminology

as DVD-Video, individual DivX video files are called “Titles.” When naming files/titles on a CD-R/RW

disc prior to burning, keep in mind that by default they will be played in alphabetical order.

• The player may take some time to find a title on a disc when you start playback, etc. This is

normal.

Button

What it does

DivX video compatibility

• Official DivX Certified product.

ꢈ

Starts or resumes playback.

Titles are played in alphabetical order.

• Plays DivX 5, DivX 4, DivX 3 and DivX VOD video content (in compliance with DivX

Certified technical requirements).

ꢅ

ꢆ

Pauses a disc that’s playing, or restarts a paused disc.

• File extensions: .avi and .divx (these must be used for the player to recognize DivX video files).

Note that all files with the .avi extension are recognized as MPEG4, but not all of these are

necessarily DivX video files and therefore may not be playable on this player.

• Media: ISO 9660* formatted CD-R/RW/ROM

* ISO 9660 Level 1 or 2 compliant. CD physical format: Mode1, Mode2 XA Form1. Romeo and Joliet

file systems are both compatible with this player.

• Multi-session playback: No

• Unfinalized disc playback: No

Stops playback. RESUME shows in the front panel display indicating that

you can resume playback (press ꢆ again to clear the resume point). Note

that the resume point is lost if you switch the player off.

ꢉ

ꢌ

Press to start fast reverse scanning. Press ꢈ (play) to resume normal

playback.

Press to start fast forward scanning. Press ꢈ (play) to resume normal

playback.

• File structure: Up to 299 folders; up to 648 folders and files combined per folder.

DivX, DivX Certified, and associated logos are trademarks of DivXNetworks, Inc. and are used under

license.

ꢃ

Skips to the start of the current title, then to previous titles.

Skips to the next title.

ꢄ

ꢎ/ꢍ

Press ꢅ, then press to advance one frame. Press and hold ꢎ/ꢍ to start

slow motion playback (press repeatedly to change the slow motion play

speed).

AUDIO

Press to display the playback audio type; press repeatedly to change the

playback audio type.

SUBTITLE

ZOOM

Press to display subtitle information; press repeatedly to change subtitles.

Press to zoom the screen. Press repeatedly to change the zoom factor (2x,

4x, Normal).

DISPLAY

Press repeatedly to show various disc related information, such as elapsed,

remaining and total playing time, and the title name.

Download from Www.Somanuals.com. All Manuals Search And Download.

DivX® video playback (DV-470 only)

Browsing DivX video titles using the Disc Navigator

About DivX VOD content

Use the Disc Navigator to browse the contents of a disc. Note that if there are other types of files on

In order to play DivX VOD (video on demand) content on this player, you first need to register the

player with your DivX VOD content provider. You do this by generating a DivX VOD registration code,

which you submit to your provider.

the same disc, these will not be displayed in the Disc Navigator.

Press HOME MENU and select ‘Disc

Navigator’ from the on-screen menu.

Use the cursor buttons (ꢀ/ꢁ/ꢂ/ꢃ) and

ENTER to navigate.

Important

• DivX VOD content is protected by a DRM (Digital Rights Management) system. This restricts

00:00/ 00:00

0kbps

playback of content to specific, registered devices.

• If you load a disc that contains DivX VOD content not authorized for your player, the message

Authorization Error is displayed and the content will not play.

• Resetting the player (as described in Resetting the player on page 21) will not cause you to lose

your registration code.

Sport

Comedy

Drama

Displaying your DivX VOD registration code

Press HOME MENU and select ‘Initial

Use the cursor up/down buttons (ꢀ/ꢁ) to move up and down the folder/title list.

Use the cursor left button (ꢂ) to return to the parent folder.

Use ENTER or cursor right (ꢃ) to open a highlighted folder.

• You can also return to the parent folder by going to the top of the list to the ‘..’ folder, then

pressing ENTER.

Settings’.

Select ‘Options’, then ‘DivX VOD’.

Initial Settings

Digital Audio Out

Video Output

Language

Parental Lock

DivX VOD

Display

To play the highlighted title, press ENTER.

• Playback begins, starting with the selected title, and continues until the end of the folder.

Display

Options

Tip

• To play the contents of the whole disc rather than just the current folder, exit the Disc Navigator

and start playback using the ꢈ (play) button.

Select ‘Display’.

Initial Settings

Your 8-digit registration code is displayed.

Digital Audio Out

Video Output

Language

DivX VOD Registration Code

0 1 2 3 4 5 6 7

Using repeat play

You can use the repeat play feature to repeat individual titles on a disc.

Display

During playback, press PLAY MODE and select ‘Repeat’ from the list of functions on the

Options

left.

Select a repeat play option.

• Repeat Title – Repeat the currently playing title.

• Repeat Off – Switch off repeat play.

Make a note of the code as you will need it when you register with a DivX VOD provider.

Using time search

Playing DivX VOD content

Use the time search to jump to a specified point in the currently playing DivX title.

Some DivX VOD content may only be playable a fixed number of times. When you load a disc

containing this type of DivX VOD content, the remaining number of plays is shown on-screen and

you then have the option of playing the disc (thereby using up one of the remaining plays), or

stopping. If you load a disc that contains expired DivX VOD content (for example, content that has

zero remaining plays), the message Rental Expired is displayed.

If your DivX VOD content allows an unlimited number of plays, then you may load the disc into your

player and play the content as often as you like, and no message will be displayed.

During playback, press PLAY MODE and select ‘Search Mode’ from the list of functions

on the left.

Select ‘Time Search’.

Use the number buttons to enter a time.

Enter the number of minutes and seconds into the currently playing title you want playback to

resume from. For example, press 4, 5, 0, 0 to have playback start from 45 minutes into the title.

Press ENTER to start playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

DivX® video playback (DV-470 only)

Download from Www.Somanuals.com. All Manuals Search And Download.

DivX® video playback (DV-470 only)

Download from Www.Somanuals.com. All Manuals Search And Download.

PIONEER CORPORATION

4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS (USA) INC.

P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: 1-877-283-5901

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300

PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.

Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270

Published by Pioneer Corporation.

<DV-370/470/2750-En>

Download from Www.Somanuals.com. All Manuals Search And Download.

Pella Window 80WX0101 User Manual
Philips Clock Radio AJ 3941 User Manual
Philips Computer Drive FM01SW81 User Manual
Philips Portable Speaker SBA161 User Manual
Philips Stereo Amplifier TDA6111Q User Manual
Plantronics Telephone XL40D User Manual
Poulan Snow Blower 414949 User Manual
Printek Printer RT43 User Manual
Printronix Printer T3306 User Manual
PYLE Audio DJ Equipment PDMXi3 User Manual