Professional Series
User Guide
Pro800 DECT Digital Cordless Telephone
with Answering System
Pro600 DECT Digital Cordless Telephone
Keep this user guide for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
3
2008-11-11
16:17:29
Warnings and Safety Information
• This telephone complies with applicable safety requirements for
exposure to radio waves (EMR). The mean power of this telephone
does not exceed 20mW limit at which point testing is required.
• The earpiece of the handset may attract small metal objects such as
staples and pins. Care should be taken when placing the handset near
these items.
IMPORTANT
• Persons with pacemakers should seek advice from their doctor before
using this product.
• Avoid exposure of this telephone to moisture or liquid.
• To prevent electric shock, do not open the handset or base cabinet.
• This telephone is not designed for making emergency telephone calls
when the mains power fails. Always have a corded phone available to
be able to make and receive calls to emergency services if the mains
power fails.
• Do not use your telephone during an electrical storm thunderstorm as
it is possible to get an electric shock. Refer to information contained in
White pages directory.
• This phone is designed for connection to a PSTN telephone line or an
analogue extension port of a PBX system. If you connect this device to
a digital extension of a PBX, damage may result to the PBX.
• Avoid metallic contact (e.g. metal clips, keys) between the battery
contacts and charging conductors.
• There is a slight chance that the telephone could be damaged by an
electrical storm. It is recommended that users unplug the phone from
the mains supply and telephone socket during a storm.
• Do not use the handset in an explosive hazard area such as where
there is gas leaking.
• Follow the local regulations regarding the disposal of your packing
materials, exhausted batteries and used phone. Wherever possible,
recycle those materials.
• We advise that this phone should not be used near intensive care medical
equipment.
• Clean with a dry, soft, lint-free cloth. Never use cleaning agents,
particularly aggressive solvents.
• Because the phone works by sending radio signals between base
station and handset, wearers of hearing aids may experience
interference in the form of a humming noise. The telephone is
compatible with most popular hearing aids on the market. However,
due to the wide range of hearing aids available, there is no guarantee
that the telephone will function "problem free" with every model.
CAUTION
Use only the mains adaptors supplied with this product. Incorrect
adaptor polarity or voltage can seriously damage the unit.
Adaptor for base unit:
Input: 100~240VAC 50/60Hz 680mA
!
Output: 12VDC 670mA
This telephone is capable of producing very high volume
levels when the "Boost" is switched on and the volume
control is set to maximum. Extreme caution should be taken
if the handset is to be shared between users with normal
hearing and those with hearing impairments.
•
Your phone can interfere with electrical equipment such as answering machines,
TV and radios, clock radios and computers if placed too close. It is recommended
that you position the base unit at least one metre from such appliances.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
1
2008-11-11
16:17:30
Getting Started
Installation and Charger
WARNING
1. Connect the mains adaptor (supplied) to the socket on
the back of the base unit and to the wall mains supply.
2. Connect the telephone cord to the phone socket on the
back of the base unit and into the wall phone socket.
DO NOT USE STANDARD/ALKALINE BATTERIES IN THIS
PRODUCT, AS THERE IS A RISK OF EXPLOSION AND/OR
INJURY. USE ONLY NI-MH RECHARGEABLE BATTERIES AS
SPECIFIED IN THIS USER GUIDE. CONTACT ORICOM FOR
REPLACEMENT BATTERIES.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
3. Insert 2 rechargeable Ni-MH AAA
1.2V 800mAh batteries (included),
observing the correct polarity, into
the battery compartment on the
handset. Slide the battery door firmly into place.
4. Place the handset on the charging cradle and charge the
batteries for a full 15 hours before using it for the first time.
INCORRECT TYPE.
Never use non-rechargeable batteries. Use recommended
type supplied with this product.
• Never use alkaline or lithium batteries.
• Do not dispose of the batteries in a fire, as they can
explode.
• Do not open or mutilate the battery. Released electrolyte is
corrosive and can cause damage to the eyes or skin. It can
be toxic if swallowed.
• Avoid contact with metal objects when handling the
battery. These objects could short out the batteries or
cause the conductor to overheat resulting in burns.
• Do not attempt to recharge the battery cell by heating it.
Sudden release of battery electrolyte can cause burns or
irritation to the eyes or skin.
• Observe the proper polarity, or direction, of any battery.
Reverse insertion of the battery cell can result in leakage
or explosion.
• Remove the batteries if you do not plan to use the product
for several months at a time.
• Follow the local regulations regarding the disposal of your
packing materials, exhausted batteries and used phone.
Wherever possible, recycle those materials.
Select your country
After the phone is fully charged you will need to select
your country. The phone will display Welcome. Press
[
]. Scroll [ ] or [ ] to select Australia or New
Zealand. Press [ ] again to confirm.
Note:
It may take some time for the cordless handset to power up,
and it may get warm during initial charge. This is normal.
It is good practice to put the cordless handset on the charging
cradle when it is not in use to ensure that the handset is always
fully charged.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
2
2008-11-11
16:17:30
Getting Started
Pack contents
Purchasing additional handsets
Depending on the model you have purchased this pack You may expand your Pro600/800 by adding more handsets
should contain the following items:
(PROHS). These can be purchased separately from the
reseller where you purchased the product, or directly from
Oricom (Australia). The Pro600/800 can accommodate a
total of 4 cordless handsets.
If any of these are missing, please contact Oricom directly.
Pro600-1/Pro800-1 Pro600-2/Pro800-2
Base units
1
1
0
1
1
1
1
1
2
1
2
1
1
1
Cordless handsets
Charging cradle
Power adaptors
Modular adaptor plug
Line cord
Important:
Do YoU HaVE BroaDBanD/aDSL?
If you do, you must connect an in line filter (not supplied)
between the telephone socket and your Pro600/800
base to ensure that your broadband and Pro600/800
will work properly. If you do not install the filter you will
experience interference on the Pro600/800 and your
Broadband may suffer dropouts. Please refer to the user
guide of the in line filter for installation.
User guide
Handset
Rechargeable AAA
Ni-MH Batteries (1.2V
800mAh)
2
1
4
2
Handset Battery cover
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
3
2008-11-11
16:17:30
Getting Started
Pro800
Incoming call light
Memory 1/User profile 1
Volume up/down & Equaliser
Memory 2/User profile 2
30 dB Boost
Up/Redial
Display
Recall
Headset socket (Headset not included)
Phone Book
Menu/Mute/Delete
Down/Calls list
Internal call
End call
External call/Handsfree
Alphanumeric
keypad
OGM
Answer on/off/Stop/Answer Mode
Date/Time
Volume up
#/Keylock
Pause (long press 0)
*/Ringer on/off
Volume down
Delete
Fast forward/Memo
Microphone
Play/Pause/OK
Rewind
Ring Delay (under base)
Incoming Call/Charging/Line in Use
PIN Code (under base)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
4
2008-11-11
16:17:31
Getting Started
Pro600
Incoming call light
Volume up/down & Equaliser
Memory 1/User profile 1
Memory 2/User profile 2
Up/Redial
30 dB Boost
Display
Headset socket (Headset not included)
Phone Book
Menu/Mute/Delete
Internal call
Recall
End call
External call/Handsfree
Down/Calls list
Alphanumeric keypad
#/Keylock
*/Ringer on/off
Pause (long press 0)
Microphone
Find handset
Incoming Call/Charging/Line in Use
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
5
2008-11-11
16:17:33
Operating the Telephone
Icons in the handset display
Operating the Telephone
The instructions throughout this guide are for both the
telephone base and the cordless handset, unless stated
otherwise.
Icon
Description
Phone Book mode
<
>
There is previous page to view on the left
There is next page to view on the right
Battery status
Display and explanation of operation sequences.
Enter digits or letters
Ringer off
Press the button shown, briefly
Keylock is on
2 x
Press the button shown, twice briefly
Press the button shown for 2 seconds
Press and hold the button shown
Release button shown
Handsfree mode
2 sec
Call in progress
Press and hold
Release
Boost receiver volume is on
Handset microphone is muted
You have new calls
Handset rings
Base station rings
When steady indicates that the handset is in range
of the base. When flashing indicates that the
handset is out of range of the base.
Cordless handset external call button
End a call and/or return to standby on
the cordless handset
Internal call in progress
Message waiting
VOLUME 1 or
Text or icon in the display
Note: Indicates a message from your network
operators service. Subscription charges
and access fees may apply.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
6
2008-11-11
16:17:33
Operating the Telephone
Navigating in the menu
Creating phone book entries - example
All the handset functions can be accessed via the
menu. Please refer to "Using the menu" on page 12 for
information on how to access each function.
This example explains how to navigate and create
entries in the phone book. Proceed as in this example for
all the settings.
Open the phone book
All descriptions in this operating manual assume that
the handset is in Standby mode.
Option,
Select "New entry"
Save
Save
Enter the name (max. 16 letters) and confirm it
Open the main menu
Enter the phone number (max. 24 digits) and
confirm it
or
Select the submenu required
Open the submenu
or , Save Select and confirm a ringing melody
or
Select the function required
Open the function
Storing a quick dial entry
M1 or M2
Option,
Save
Press the required quick dial button
Select "New entry"
or
Select the setting required
Enter digits or letters using the relevant keys
Confirm the entries
Enter the name (max. 16 letters) and confirm it
or Save
Save
Enter the phone number (max. 24 digits) and
confirm it
Cancel and return to standby mode
Every process is automatically cancelled if there is no
input within 20 seconds. The handset will return to
standby mode.
If you see a < or > icon, there are more digits to be
viewed than can be shown on the display. Press the <
or > key to view the digits.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
7
2008-11-11
16:17:34
Telephone
Calling back missed calls
Telephone
Making a call
Your telephone stores the last 30 incoming calls in the
calls list.
Enter the phone number (max. 24 digits)
Open the calls list
Following incorrect input, press to delete
the last digit
or
,
or
Select an entry and dial the number
Dialling phone numbers from the phone book
Dial the phone number
There must be phone numbers stored in the phone book.
See page 19. Your telephone can store up to 200 name
and number entries in the phone book.
It is also possible to press the external call button first
to obtain dialling tone. The digits entered will then be
dialled immediately. It is not possible to correct wrong
digits individually using this dialling procedure.
Open the phone book
or
,
or
Select an entry and dial the number
End a call
Quick dial
End the call
Phone numbers must have been stored as quick dial
numbers. See page 7.
Take a call
or
Take the call
M1 or M2
or
Press the required quick dial button
Dial the number
Redial
Your telephone stores the last 10 telephone numbers
dialled (max. 24 digits each).
Open the redial list
or
,
or
Select an entry and dial the number
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
8
2008-11-11
16:17:34
Telephone
Chain dialling
This feature is used for more complex telephone
Boosting the receiver volume
When in a call, you can increase the loudness of each
services, eg for telephone banking or calling card
procedures. Several numbers stored in the phone
book can be dialled successively when a connection
has already been made. It is also possible to combine
numbers from the phone book with numbers entered
manually. Numbers stored in the phone book can be
chained and transmitted as required.
volume setting if you press the 30dB button.
Press the button, an icon flashes in the
display
Handsfree
Use Handsfree to listen to your caller via the loudspeaker.
Switch on handsfree mode
2X,
Open the phone book when a connection
has been made
Deactivate handsfree mode
Adjusting the Handsfree volume
or
,
or
Select the phone book entry and
transmit the number
There are 5 handsfree volume levels available. The
"30dB" feature is not available in handsfree mode.
Adjusting the receiver volume
Adjust the volume with the side switch.
The receiver volume of your telephone is louder than
with a standard telephone. Push up or down and release
for each volume step.
Talk time display
The duration of each call is displayed in minutes and
seconds during the call.
When in a call, adjust the setting with
the side switch
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
9
2008-11-11
16:17:35
Telephone
Muting the microphone
Making internal calls
The microphone can be activated and deactivated during
a telephone conversation when you are in handset or
handsfree mode.
There must be two or more handsets (HS1, HS2)
registered to a base station in order to make internal
calls free of charge.
, Mute On
, Mute Off
Switches the microphone off (Mute).
Switches the microphone on
HS1: <INT, , eg 2 Dial the internal call number of the
required handset
HS2:
Accept the internal call on the other
handset
Ringer on/off
You can turn the bell of the ringer on and off.
HS1/HS2:
End the internal call
2 sec
2 sec
Switches the bell ringer off
Switches the bell ringer on
Transferring external calls internally
HS1: <INT, , eg 2 During an external call, dial the
Keylock
number of the required handset
Calls can still be answered in the normal way when the
keylock is on.
HS2:
HS1:
Accept the internal call on the other
handset
2 sec
,
Locks the keypad
Unlocks the keypad
External call is transferred to the other
handset
, #
If the called handset does not answer, you can take the
call back by pressing the button.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
10
2008-11-11
16:17:35
Telephone
Conference calls
At the base
You can hold a conference call between 1 external and 2 10 sec ,
Activate registration mode
internal callers.
At the handset
or
HS1: <INT, , eg 2 During an external call, dial the
,
,
Open the menu, select "Handset"
Select "Registration", "Register"
Select 1,2,3 or 4
number of the required handset
Accept the internal call on the other
handset
or , ,
HS2:
or , ,
,
,
Enter the PIN code and confirm
HS1: Conf
Activates conference call
HS1 or HS2:
End conference call
Handset deregistration
You will only need to de-register a handset if you decide
that you have too many handsets registered or your
handset develops a fault and you need to replace it.
Handset registration
You only need to register a handset that has become
deregistered from the base or if you have purchased a
new handset.
,
or
,
Open the menu, select "Handset"
Select "Registration", "De-register"
Enter the PIN code and confirm
or , ,
,
New additional handsets must be fully charged before
you attempt to register them.
,
,
,
Enter the handset number and confirm
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
11
2008-11-11
16:17:36
Using the menu
Changing the Profile name
Using the menu
You can personalise each profile by naming it.
Answering Machine (Pro800 Only) (see page 23)
,
or
,
Open the Menu, select "Profile"
Select "Profile 1 or 2"
Select "Name"
Phone book (see page 19)
or
or
,
,
Priority/Default Setting
Delete the current name
If you are the main user of this telephone you should
change the settings in the menu so that they are
just right for you. These settings will be memorised
automatically whenever you wish to make or answer a
call.
Save
Enter the new name and confirm it (max.
10 letters).
Changing the Profile Handset Volume
There are 5 volume settings available.
The user profile feature can be used by others in
the household whose preferences for volume, boost
and Equaliser will also be memorised and applied as
indicated below.
or
,
Select "Volume"
3
The current setting is shown
Select and confirm the handset volume
or , save
Changing the Profile "Boost" setting
User Profiles
or
,
Select "Boost"
You can store 2 different user profiles, each with
different settings for the "Volume", "Boost" and
"Equaliser" features. You can also personalise each
Profile by naming it (Max 10 letters).
Off
The current setting is shown
Select and confirm "On" or "Off"
or
,
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
12
2008-11-11
16:17:36
Using the menu
Changing the Profile "Equaliser" setting
Selecting a Profile for use
Incoming calls
or
,
Select "Equaliser"
Select and confirm
or , save
When you receive an incoming call and before you
answer the telephone, press the M1 or M2 key for the
profile you wish to use.
Press the key to return to standby.
The display will confirm the profile that has been
selected and you can answer the call as normal.
Copy a User Profile
You can copy a user profile to another compatible,
registered handset.
Outgoing calls
When you wish to make an outgoing call, press and hold
the M1 or M2 key for the profile you wish to use. The
display will confirm the profile that has been selected
and you can now make your outgoing call as normal.
,
or
,
Open the Menu, select "Profile"
Select "Profile 1 or 2"
Select "Copy"
or
or
,
,
< > 2, 3, 4
Select the handset
User profiles cannot be selected in Handsfree mode.
or
Confirm or cancel
If you do not dial your outgoing call within 30 seconds
of pressing the M1 or M2 key, the selected profile will
timeout and the default telephone settings will be used
for the call.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
13
2008-11-11
16:17:36
Using the menu
Equaliser
Use the Equaliser feature to adjust the tone and high
frequencies until they are right for you.
Handset
Handset Ringing melody
There are 10 different ringing melodies available.
,
or
,
Open the Menu, select "Handset"
Select "Equaliser"
,
or
,
Open the Menu, select "Handset"
Select "Ring tone"
or
,
or , Save
Adjust the settings and confirm
or
,
Select "External" or "Internal (intercom)"
You can also adjust the equaliser settings when you
are in a call. Press the middle of the key to
Melody 8 (External)
Melody 8 (Internal)
,
The current setting is shown
switch between the volume control and the Equaliser.
When the equaliser screen is displayed, use the up or
or , Save
Select and confirm a ringing melody
Handset Ringing volume
down of the
key to adjust the setting.
There are 5 ringing volume settings available and "OFF".
Boost Memory
,
or
,
Open the Menu, select "Handset"
Select "Ringer volume"
With this feature set to "On" if you use the , button,
your handset will remember and use your last Boost
setting for each call.
,
Volume 3
or , Save
The current setting is shown
Select and confirm a ringing tone volume
or "OFF"
,
or
,
Open the Menu, select "Handset"
Select "Boost memory"
or
or
,
Off
The current setting is shown
Select and confirm "On" or "Off"
,
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
14
2008-11-11
16:17:37
Using the menu
Handset name
You can personalise your handset by naming it (max. 12
Auto talk
With this feature set to "On", your handset will
letters).
automatically answer the call when you pick up the
handset from the base.
,
or
,
Open the Menu, select "Handset"
Select "Handset name"
,
or
,
,
Open the Menu, select "Handset"
Select "Auto talk"
or
,
or
or
Delete the current name
Off
The current setting is shown
Select and confirm "On" or "Off"
, Save
Keypad Beep
Enter new name and confirm it
,
Backlight time
,
or
,
Open the Menu, select "Handset"
Select "Keypad Beep"
You can select the number of seconds 10, 20, 30 or 40
before the backlight turns off.
or
or
,
On
The current setting is shown
Select and confirm "On" or "Off"
,
or
,
,
Open the Menu, select "Handset"
Select "Backlight time"
,
or
10S
or
Contrast
The current setting is shown
Select and confirm
There are 5 different contrast levels available so that you
can set the display to how you find it most easy to read.
,
,
or
,
Open the Menu, select "Handset"
Select "Contrast"
or
,
Level 3
The current setting is shown
Select and confirm the contrast setting
or
,
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
15
2008-11-11
16:17:37
Using the menu
Confirm beep
Language
There are 5 languages available, English, German,
French, Spanish and Italian.
,
or
,
Open the Menu, select "Handset"
Select "Confirm beep"
or
or
,
,
or
,
Open the Menu, select "Handset"
Select "Language"
On
The current setting is shown
Select and confirm "On" or "Off"
or
,
,
English
or
The current setting is shown
Select and confirm a language
(This allows the handset to work on multiple bases)
Select base
or
,
,
,
Open the Menu, select "Handset"
Select "Select base"
NZ Caller ID
or
Auto
or
,
,
or
,
Open the Menu, select "Handset"
Select "NZ Caller ID"
The current setting is shown
Select and confirm "Auto" or "Manual"
or
or
,
,
Off
The current setting is shown
Select and confirm "On" or "Off"
,
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
16
2008-11-11
16:17:38
Using the menu
Shaker
Base settings
You can plug a shaker accessory (VIB100 not included)
into the socket on the back of the base. This can be
purchased separately from the reseller where you
purchased the product, or directly from Oricom (Australia).
With this feature turned "ON" the shaker will vibrate when
you receive an incoming call.
Base Ringing melody
There are 10 different ringing melodies available.
,
or
,
Open the Menu, select "Base settings"
Select "Ring tone"
3
The current setting is shown
Select and confirm a ringing melody
,
or
,
Open the Menu, select "Base settings"
Select "Shaker"
or , save
,
Base Ringing volume
On
The current setting is shown
Select and confirm "On" or "Off"
There are 5 ringing volume settings available and "OFF".
or , save
System PIN
or
,
or
,
Open the Menu, select "Base settings"
Select "Ringer volume"
,
,
,
Open the Menu, select "Base settings"
Select "System PIN"
Level 3
or , save
The current setting is shown
or
,
Select and confirm a ringing tone volume
,
Enter the old PIN and confirm it
Enter the new PIN and confirm it
or "Off"
2x
,
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
17
2008-11-11
16:17:38
Using the menu
Time
Alarm
Set Alarm
Date/Time
,
or
,
,
Open the Menu, select "Alarm"
Select "Set alarm"
,
or
,
Open the Menu, select "Time"
Select "Date and Time"
or
,
Select Once, Every Day, Mon to Fri or Off
, save
Enter the day, month and year, followed
by the time in 24 hour clock and confirm.
, save
Enter the alarm time (24hour clock) and
confirm
Set Time Format
or
, save
Select the alarm melody and confirm
,
,
Open the Menu, select "Time"
Select "Set time format"
Night Light
,
,
or
Open the Menu, select "Alarm"
Select "Night light"
24 Hour
The current setting is shown
Select and confirm "12 hour" or 24 hour"
or
,
or
,
On
The current setting is shown
Select and confirm "On" or "Off"
or , save
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
18
2008-11-11
16:17:38
Phone Book
Creating phone book entries
Open the phone book
Select "New entry"
Phone Book
200 names and phone numbers can be stored in the phone
book with a maximum of 16 letters and 24 digits for each entry.
Option,
, save
Enter the name (max. 16 letters) and
confirm it
* Always enter the area dialling code with each phone
book entry.
, save
Enter the phone number (max. 24 digits)
and confirm it
* The phone book entries are managed alphabetically.
To go quickly to a phone book entry, enter the first
letter of the corresponding entry.
or , save
Select and confirm a ringing melody
Editing phone book entries
Open the phone book
Entering a name
The digit keys are also labelled with letters for the entry
of the respective letters. Pressing the respective key the
necessary number of times enables capital letters and
digits to be entered.
or
Select a phone book entry
Option,
Activate the editing process
, save
Edit the name (max. 16 letters) and
confirm it
Space
Delete
, save
Edit the phone number (max. 24 digits)
and confirm it
Press the "*" key to switch between
upper "ABC" and lower "abc" case.
or , save
Select and confirm a ringing melody
To enter the same letter twice, press the button to
enter the letter. Wait until the cursor moves forward
one place. Enter the letter again.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
19
2008-11-11
16:17:39
Phone Book
Show details
Copy phone book entries to another registered handset
Open the phone book
Select a phone book entry
Select "Show details"
Open the phone book
or
or
Select a phone book entry
Option, or
Option, or
Activate the copying process (Copy entry,
Copy append or Copy all)
Deleting phone book entries
Open the phone book
< or >, eg HS2 Select the destination handset
HS2
Accept on destination handset
or
Select a phone book entry
If you copy all the entries from one handset to another.
All the existing entries on the destination handset will
be deleted.
Option, or
Activate the deletion process (Delete
entry or Delete all)
2x or
Confirm the deletion or Cancel
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
20
2008-11-11
16:17:40
Caller ID
Other messages that you may see in the display, if your
telephone network provider supports this service, are:
Caller ID
If you subscribe to your telephone operators service
WITHHELD
PRIVATE
The caller has withheld their number or
the information is not available
(charges may apply), numbers of the incoming calls
will be displayed on the screen and stored in the call
log (please consult your telephone service provider for
details).
INTERNATIONAL The caller is dialling you whilst abroad
or may be using an internet telephony
service.
The number of the caller (or name if stored in the Phone
Book) appears in the display when the phone rings. If the
caller has withheld their phone number, a corresponding
message appears in the display. The phone number is
not displayed and will not be stored in the calls list.
PAYPHONE
The caller has dialled you from a public
payphone
Call from a network operator
OPERATOR
Storing calls list entries in the phone book
A phone number stored in the calls list can be stored
directly to the phone book
A total of 30 incoming calls, with a maximum of 16
letters for the name and 23 digits for the number can be
stored in the calls list. The flashing indicates new calls
in the calls list.
Opens the calls list at most recent entry
or
Select an entry
Displaying calls list entries
Option
, save
, save
Save to phone book
Enter the name and confirm it
Edit the number and confirm it
Select and confirm a ringing melody
Opens the calls list at most recent entry
or
Select an entry
or , save
>
To display further information.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
21
2008-11-11
16:17:40
Caller ID
Take two different calls at the same time
Deleting calls list entries
Deleting a single calls list entry
If you have subscribed to your telephone network
operators Call Waiting Caller ID service, your phone
will display the number of the second incoming call for
around 20 seconds while you are talking on the phone.
Opens the calls list at most recent entry
Select an entry
or
During a call, you will hear two loud beeps periodically to
notify you of another incoming call. If you wish to answer
this call:
Option, or
or
Select "Delete"
Confirm or Cancel
Deleting all calls list entries
Opens the calls list at most recent entry
1. When the handset receives a second call, the number
of the caller appears on the display. It will display for
20 seconds or until you press a key on the phone.
Option, or
Select "Delete all"
Delete all calls?
or
Confirm or Cancel
2. Press [ ] to listen for dial tone then Press [2] to
put the current call on hold and talk with the second
caller.
3. Subsequent presses [ ] to listen for dial tone then
Press [2] will toggle you between these 2 callers.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
22
2008-11-11
16:17:40
Using the Answering Machine (Pro800 Only)
Check your OGM
Answering Machine (Pro800 Only)
The current OGM is announced
Your answering machine can be ready for use within a
few seconds of plugging in the telephone line cord and
switching on the mains power.
To return to the factory pre-set OGM, just press the
key whilst the current OGM is playing.
Just follow the steps in this section to set up and use
your answering machine.
Set the answer delay
2 sec (Under base) Enters ring delay mode and announces
Switch on/off
the current setting.
Switches the answering machine on
or off. The current answer mode is
announced.
Select between 2-9 rings or "Time
Saver".
Confirm the number or rings (2-9) or
"Time Saver".
Set the answer mode
Switch the answering machine on
Time saver: This feature can save you the cost of a
call when you ring in to listen to your messages from
another phone. If your answering machine answers
after 2 rings you have new messages, if it answers
after 5 rings then there are no new messages. Hang
up after the 2nd ring and you will not be charged for
the call.
2 sec
To change the mode between "Answer &
Rec." and "Answer Only"
Record your outgoing message (OGM)
Your answering machine comes with a default outgoing
message but you can record your own personal OGM of
up to 2 minutes long.
2 sec
Record your message after the beep
Press to end your recording
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
23
2008-11-11
16:17:41
Using the Answering Machine (Pro800 Only)
Set the date and time
Listening to your messages/memos
2 sec
Enters date and time mode
Select a day of the week
Confirm the day
Your messages/memos are played back in the order that
they were received. New messages are played before
old messages. The time and date of each recording is
announced before each message is played back. The
maximum length of the message is 2 minutes.
Select the hour
Confirm the hour
Play/Pause
Stop
Rewind
Select the minutes
Confirm the minutes
Check the date and time
Fast forward
The current date and time setting is announced
Delete a single message/memo
Record a memo
Play the message to be deleted
2 sec
Delete all messages/memos
2 sec When no messages are being played
Deletes all old messages
Delete the message
You can use your answering machine to record memo
messages for other users to listen to later. The maximum
length of the message is 2 minutes. The minimum length
of the message is 1 second.
2 sec
Record your memo after the beep
Press to end your recording
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
24
2008-11-11
16:17:42
Using the Answering Machine (Pro800 Only)
Listen to your messages/memos via the handset
,
or
,
Open the Menu, select "Ans Machine"
or
,
Select "Play New Msgs" or "Play All
Msgs"
Press the key to return to standby.
Memory Full
Should your answering machine become full either
during a recording or after the memory has become full,
"Memory Full" will be announced and the Answer Mode
will change automatically to "Answer Only". You will need
to delete some messages before any new messages can
be recorded.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
25
2008-11-11
16:17:42
Using Remote Access (Pro800 Only)
Press the
key at any time to exit from changing
Remote Access (Pro800 Only)
the PIN code and return to standby. The PIN code will
then remain unchanged.
You can call your answering machine from any
TouchtoneTM phone or mobile phone whilst you are away
from home to listen to your messages.
Call in to check your messages
Dial your own phone number and wait
until the answering machine picks up
the call.
PIN Code for remote access
A 3-digit PIN code is required for remote access to
your answering machine. The default code is "000" but
for security reasons you should change this to a code
personal to you.
2 x,
,
Switch to remote access and enter your
3 digit PIN code after the voice prompt.
Changing the PIN code
If you enter your PIN code incorrectly, the answering
machine will hang up the call.
2 sec PINCODE Announces the current security code
(Under base)
and prompts for 1st digit
Select the 1st digit
Confirm the digit
If you enter your PIN code correctly you can now remotely
control your answering machine by using the digits on the
keypad.
Select the 2nd digit
Confirm the digit
Select the 3rd digit
Confirm the digit. Your new security code
will be announced.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
26
2008-11-11
16:17:43
Using Remote Access (Pro800 Only)
Remote commands
Digit
Function
1
2
3
4
5
6
7
8
9
0
*
Rewind
Play/Pause
Fast Forward
1st OGM Playback (Answer & Record)
1st OGM Recording
Stop
Delete current message
Answer Off
Answer On/Answer mode
Delete all old messages
Skip announcement
Switch to remote access
Record a memo
**
#
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
27
2008-11-11
16:17:43
Advanced Settings
Dialling pause (PBX ONLY)
Advanced Settings
Setting the Recall time
When using some PBX phone systems, it takes a little
time before the dial tone becomes available. It is possible
to insert a pause after the number for the outside line so
that the number can be dialled in a continuous process
without having to wait for the dial tone.
Two recall timings are available. Short 100ms (Australia)
and Long 600ms (New Zealand).
,
or
,
Open the Menu, select "Base settings"
Select "Recall"
2 sec
Insert a pause. "P" is shown in the
display.
or
Short
or , save
,
The current setting is shown
Select and confirm "Short" or "Long"
Reset to default settings
You can reset your handset to its original default settings.
The phonebook, calls list and redial list are deleted when
you reset to default settings.
R button on PBX phone systems
If the telephone is connected to a PBX phone system
functions such as transferring calls and automatic call
back can be used via the R button.
10 sec R>,
Activate Reset
or
Confirm or cancel
R button and Supplementary services
Your telephone supports the supplementary services
offered by your telephone network provider, such as
call waiting and conference calls. The supplementary
services can be used in conjunction with the R button.
Please contact your telephone network provider with
regard to enabling the supplementary services and
which recall time must be used.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
28
2008-11-11
16:17:43
Troubleshooting
Troubleshooting
Problem
Possible cause(s)
Solution(s)
Problem
Possible cause(s)
Solution(s)
Bad audio quality
(crackles,echo, etc.).
1. Interference from nearby
electrical appliance.
2. Base unit is installed in a
room with thick walls.
3. The handset is too far from
the base unit.
4. If you have Broadband/
ADSL you need an in
line filter (not supplied)
connected where this
product connects to the
phone socket.
1. Try a different connection point, one
that is away from other electrical
appliances.
Cannot make/answer 2nd call service can be
Check with your service provider. Check
the recall selection is correct.
a 2nd call.
activated.
1. Bad battery contact.
2. Dirty contact.
3. Battery is fully charged
1. Move the handset slightly.
2. Clean the battery contact with a
dry cloth.
3. Its fine to leave on the base when
fully charged.
The battery icon
is not scrolling when
the handset is placed
on the base.
2. Install the base unit in a DIFFERENT
room OR use EXTENSION leads.
3. Move CLOSER to the base unit.
4. Ensure a in-line ADSL filter is
installed on all phone sockets
between wall plate and your phone.
5. Contact your network service provider
to check your line.
A phonebook entry
cannot be stored.
The phonebook is full.
Delete any unused entries to free
memory.
Pro800 Answering System (ONLY)
5. Faulty telephone line.
Answering machine
does not record
messages.
1. The answer machine may
be turned off.
2. The memory may be full.
3. Answer mode may be set to
ANSWER ONLY.
1. Switch the answering machine on.
2. Delete some messages.
3. Change the mode to ANSWER & REC.
Caller ID does not
work.
1. Service not activated with
your Network service
provider.
2. Caller ID service is activated
but does not work or is is
intermittent.
1. Check your SUBSCRIPTION with the
SERVICE provider.
2. Ask your service provider to re set
your caller ID service.
Cannot access
messages remotely.
1. Remote access may be
switched off.
2. Wrong PIN is entered.
1. Switch Remote access on.
2. Enter the PIN once again.
Phone does not ring
1. The ringer is off.
when a call comes in. 2. Too many phones are
sharing the same phone line.
1. Turn ON the ringer.
2. Disconnect some of the phones from
the phone line.
Cannot record
outgoing message.
1. The memory may be full.
1. Delete messages.
1. Delete messages.
3. Base unit not plugged in.
3. Check base unit CONNECTIONS.
Answering machine
stops recording
part way through a
message.
1. The memory may be full.
2. The maximum message
length is more than 2
minutes.
Keypad does not
work.
Keypad may be locked.
UNLOCK the keypad.
Busy tone + in use
light on.
1. Other handset may still be
connected.
1. Check ALL handsets and END all
calls.
2. Check power supply
connection.
2. Check CONNECTIONS to wall and
base.
NOTE
If none of the above solutions help, reset your phone by disconnecting the mains power from the base and removing
all batteries from handset/s. Reconnect after 15 minutes.
Handset registration The base memory may be
fails continuously. fully charged.
Delete un-used handsets and try again.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
29
2008-11-11
16:17:44
Technical Properties
Technical properties
Feature
Value
Standard
DECT1 GAP2
Power supply (base
station)
Input: 100~240VAC 50/60Hz 680mA
Output: 12VDC 670mA
Range
Outdoors Approx 300m
Indoors Approx 50m
Standby
Up to 100 h
Up to 11 h
Max. talk time
Rechargeable batteries AAA 1.2V 800mAh NiMH
Dialling mode
Tone (DTMF)
Pulse
Permissable ambient
0ºC to 45ºC
20% to 80%
100, 600 ms
temperature
Permissable relative
humidity
Recall
1
DECT: Digital Enhanced Cordless Telecommunication =
Standard for cordless telephones.
2 GAP: Generic Access Profile = Standard for the interoperation
of handsets and base stations from different manufacturers.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
30
2008-11-11
16:17:44
Default settings
Telephone Answering Machine
Default settings
The default settings can be restored via the menu. Refer
to page 28 for the sequence of menu option selections.
Cordless handset
The default settings can be restored via the menu. Refer
to page 28 for the sequence of menu option selections.
Language
Answer mode
English
Answer and record
Language
English
Oricom
PIN-Code for remote access 000
Handset name
Answer delay
Time format
Recall time
3
Handset Ringing melody (External) 8
24 Hour
100 ms
Handset Ringing melody (Internal)
Handset Ringing volume
Base Ringing melody
Base Ringing volume
Shaker
8
3
3
3
On
On
Off
3
Keypad beep
Auto talk
Contrast
Backlight time
Boost Memory
Recall time
10S
Off
100 ms
Tone
0000
Dialling mode
PIN-Code
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
31
2008-11-11
16:17:44
Maintenance/Guarantee
Warranty (Australia)
(a) Warranty Oricom International Pty Ltd (Oricom) warrants
that the product is free from defects in materials and
workmanship for a period of 12 months effective from the
date of purchase. This warranty in no way affects your
statutory warranty under the Trade Practices Act 1974 or
any other similar legislation. It is important that you read the
Warranty Card as it contains full and additional details of the
warranty, limitation of warranty and conditions for receiving
the warranty services during the warranty period. The
Warranty Card is located in the package.
(v) Modification to the product or services carried out to the
product by anyone other than Oricom or on Oricom's
behalf.
Oricom will not be liable for consequential losses including loss
of profits arising from a cause of action in contract, tort or any
other statutory or common law (except where a statute or any law
prohibits this exclusion). The warranty does not extend to damage
caused by misuse, negligence, excessive voltage or lightning. This
warranty in no way affects your statutory rights. Full details of the
warranty are contained in the enclosed warranty card.
(b) Exclusion and limitation of liability. Oricom will not be in
breach of a warranty or condition expressly stated in this
User Guide or the Warranty Card or implied by the Trade
Practices Act and excludes any liability arising under any
statutory or common law for damages or any other remedy if
the damage occurs as a result of:
Customer Support
If you feel this product is not working correctly please consult
the user guide and ensure that you are using the product in
accordance with the instructions.
To order spare parts additional parent units, replacement parts
and in case of any technical issues you may have with this
product please consult our website for further information or
send us an email for a prompt response to your enquiry.
(i) Failure by you to follow the instructions in the User Guide
for the installation and proper functioning of the product;
(ii) Negligence on your part or misuse by you of the product;
(iii) Any un-controlled external cause to the product not
functioning including but not limited to electricity failure,
lighting, over voltage;
In the unlikely event of a fault developing, please contact us
for assistance. If the product is then found to be faulty you will
be asked to return it directly to us with a copy of the purchase
receipt.
(iv) Non adherence by you to the warnings in the User Guide
and the User Guide generally; and
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
32
2008-11-11
16:17:45
Maintenance/Guarantee
REN (RN for New Zealand)
Notes for operation in New Zealand
The REN (Ringer Equivalence Number) or (RN) is of
significance only if you wish to connect more than 1
telephone to your telephone line. A standard telephone line
has a maximum REN capacity of 3 (RN of 5). It is possible
to connect 3 (5) devices with a REN of 1 (RN of 1) with no
degradation to the product’s performance. Exceeding this
limit may cause the volume of the ringer in any phone to
decrease or not ring at all.
The grant of a Telepermit for any item of terminal equipment
indicates only that Telecom has accepted that the item
complies with the minimum conditions for connection to
its network. It indicates no endorsement of the product by
Telecom, nor does it provide any sort of warranty. Above all,
it provides no assurance that any item will work correctly in
all respects with another item of Telepermitted equipment of
a different make or model, nor does it imply that any product
is compatible with all of Telecom’s network services. This
device may be subject to ringing or bell tinkle when certain
other devices are connected to the same line. If this occurs,
the problem should not be referred to the Telecom Faults
service.
Caller ID
Customers using non Telecom toll services should not use
the dial back feature for local calls as this will incur a charge
only the 7 digit number should be dialled. Some of the CID
services listed may not be available in New Zealand.
This equipment shall not be set to make automatic calls to
the Telecom “111” Emergency Service.
This equipment may not provide for the effective hand-over
of a call to another device connected to the same line.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
33
2008-11-11
16:17:45
Index
Changing the PIN code.................................................. 26
Changing the Profile "Boost" setting............................... 12
Changing the Profile "Equaliser" setting ......................... 13
Index
A
Adjusting the Handsfree volume....................................... 9 Changing the Profile Handset Volume............................. 12
Adjusting the receiver volume.......................................... 9 Changing the Profile name ............................................ 12
Answering Machine (Pro800 Only) ................................. 23 Check the date and time ............................................... 24
Auto talk....................................................................... 15 Check your OGM........................................................... 23
Conference calls........................................................... 11
B
Confirm beep................................................................ 16
Backlight time............................................................... 15
Contrast ....................................................................... 15
Base Ringing melody..................................................... 17
Copy a User Profile........................................................ 13
Base Ringing volume..................................................... 17
Copy phone book entries to another registered handset... 20
Boost Memory .............................................................. 14
Creating phone book entries.......................................... 19
Boosting the receiver volume........................................... 9
Creating phone book entries - example ............................ 7
C
Customer Support......................................................... 32
Call in to check your messages...................................... 26
D
Caller ID....................................................................... 21
Date/Time .................................................................... 18
Calling back missed calls ................................................ 8
Default settings............................................................. 31
Chain dialling.................................................................. 9
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
34
2008-11-11
16:17:45
Index
Delete a single message/memo..................................... 24 Handset Ringing melody................................................ 14
Delete all messages/memos.......................................... 24 Handset Ringing volume................................................ 14
Deleting a single calls list entry...................................... 22 Handsfree....................................................................... 9
Deleting all calls list entries ........................................... 22
I
Deleting phone book entries .......................................... 20
Icons in the handset display............................................. 6
Dialling pause (PBX ONLY) ............................................. 28
Index............................................................................ 34
Dialling phone numbers from the phone book................... 8
Installation and Charger................................................... 2
Display and explanation of operation sequences................ 6
K
Displaying calls list entries............................................. 21
Keylock ........................................................................ 10
E
Keypad Beep ................................................................ 15
Editing phone book entries ............................................ 19
L
End a call ....................................................................... 8
Language..................................................................... 16
Listen to your messages/memos via the handset ............ 25
Listening to your messages/memos ............................... 24
Entering a name ........................................................... 19
Equaliser...................................................................... 14
H
M
Handset deregistration .................................................. 11
Handset name .............................................................. 15
Handset registration...................................................... 11
Making a call.................................................................. 8
Making internal calls ..................................................... 10
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
35
2008-11-11
16:17:45
Index
Memory Full ................................................................. 25
R
Muting the microphone ................................................. 10
R button and Supplementary services ............................ 28
R button on PBX phone systems .................................... 28
Record a memo ............................................................ 24
Record your outgoing message (OGM)............................ 23
Redial............................................................................. 8
Remote Access (Pro800 Only)........................................ 26
Remote commands....................................................... 27
REN (RN for New Zealand)............................................. 33
Reset to default settings................................................ 28
Ringer on/off ................................................................ 10
N
Navigating in the menu.................................................... 7
Night Light.................................................................... 18
Notes for operation in New Zealand................................ 33
NZ Caller ID.................................................................. 16
P
Pack contents................................................................. 3
Phone Book.................................................................. 19
PIN Code for remote access........................................... 26
Priority/Default Setting................................................... 12
Pro600........................................................................... 5
Pro800........................................................................... 4
Purchasing additional handsets........................................ 3
S
Select base ................................................................. 16
Select your country ......................................................... 2
Selecting a Profile for use.............................................. 13
Set Alarm ..................................................................... 18
Set the answer delay..................................................... 23
Set the answer mode .................................................... 23
Q
Quick dial....................................................................... 8
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
36
2008-11-11
16:17:45
Index
Set the date and time.................................................... 24
Set Time Format ........................................................... 18
Setting the Recall time .................................................. 28
Shaker ........................................................................ 17
Show details................................................................. 20
Storing a quick dial entry................................................. 7
Storing calls list entries in the phone book...................... 21
Switch on/off ................................................................ 23
System PIN................................................................... 17
U
User Profiles................................................................. 12
W
Warranty (Australia)....................................................... 32
T
Take a call...................................................................... 8
Take two different calls at the same time........................ 22
Talk time display ............................................................. 9
Technical properties...................................................... 30
Transferring external calls internally................................ 10
Troubleshooting ............................................................ 29
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
37
2008-11-11
16:17:45
Australia
Customer Support
Oricom International Pty Ltd
Locked Bag 658
South Windsor, NSW 2756
Email: [email protected]
Phone: (02) 4574 8888
Fax: (02) 4574 8898
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro_600_800.indd
2
2008-11-11
16:17:25
|