MicroNet Technology Computer Drive MNFWUSB71702 User Manual

HARDWARE GUIDE  
MACIN TO SH & W IN DO W S  
WARN IN G - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,  
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.  
CAUTIO N - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT  
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS  
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
®
GEN ESIS  
Macintosh  
TIBLE!  
RAID SYSTEMS  
OS-X 10.2 Jaguar  
A
Windows XP  
COMP  
®
SAN CUBE FIREW IRE  
STO RAGE AREA  
N ETW O RK  
®
RAIDBAN K  
RAID TO W ERS  
FIBREFLEXTM  
W O RKGRO UP  
SO LUTIO N S  
MicroNet  
19260 Van Ness Avenue  
Torrance, CA 90501  
IN STALLIN G YO UR MICRO N ET  
®
DATADO CK  
TRAN SPO RTABLE  
STO RAGE SYSTEMS  
Sales: 310-320-7272  
Support: 310-320-0772  
FIREW IRE/ USB2 CO MBO  
HARD DISK DRIVE  
MICRO N ET  
ADVAN TAGE  
SERIES  
FCC Compliance Statements  
Thank you for choosing MicroNet! Your MicroNet data storage prod-  
uct has been built to the highest standard of quality and workmanship  
and, when used according to the instructions in this guide, will provide  
years of trouble-free operation. We at MicroNet take great pride in  
bringing personal satisfaction to each of our customers. If you have any  
questions about your new FireWire Disk Drive, or about any other  
MicroNet products, please feel free to contact us!  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are  
designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses, and can radiate fre-  
quency energy and, if not installed and used in accordance with the instructions, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to equipment off and on, the user is encouraged to correct the interference by one or more  
of the following measures:  
Reorient or relocate the receiving antenna  
Increase the distance between the equipment and receiver  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected  
Consult the dealer or an experienced radio/TV technician for help  
11-04-2002  
MNFWUSB71702 RevE  
The material in this document is for information only and is subject to change without notice. While reasonable efforts have been made in the preparation  
of this document to assure its accuracy, MicronetDrives assumes no liability resulting from errors or omissions in this document, or from the use of the infor-  
mation contained herein.  
MicroNet reserves the right to make changes in the product design without reservation and without notification to its users.  
MicroNet and the MicroNet logo are registered trademarks of MicroNet. FireWire, the FireWire logo, Macintosh, and the MacOS Logo are trademarks of  
Apple Computer Inc. Microsoft Windows and the Windows Logo are registered trademarks of Microsoft Corporation. Toast is a registered Trademark of  
Roxio, Inc.  
Your drive is compatible with all FireWire or USB-capable Apple  
Macintosh computers running MacOS 8.6 (or greater), Mac OS 10.1 (or  
greater) and PC-Compatible computers running Windows 98-Second  
Edition, Millenium Edition, Windows 2000, or Windows XP.  
Copyright © 1999, 2002 MicroNet. All rights reserved. This publication may not be reproduced, stored in a retrieval system, or transmitted in any form or  
by any means, in whole or in part, without the prior written consent of MicroNet, 19260 Van Ness Ave., Torrance CA 90501.  
w w w .Micro N e t.co m  
Revised 11-2002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOFTWARE INSTALLATION- Firewire  
SOFTWARE INSTALLATION- USB  
Windows Systems  
Windows Systems  
TM  
TM  
Installation on a Windows system requires either Windows 98-Second Edition, Windows  
Millenium, Windows 2000, or Windows XP. FireWire is not supported on Windows 95, earlier  
versions of Windows 98, or Windows NT 4.0 and earlier.  
Installation on a Windows system requires Windows 98 or greater. The USB  
drivers for your product do not support Windows 98/Windows NT4 or eariler.  
No Additional software is necessary for installation under Windows ME,  
Windows 2000, or Windows XP.  
Windows 98/ME  
Windows 98  
(for Windows ME installation, please skip to step 4)  
Please be sure to have your Windows 98/ME installation CD available as it may be  
required during installation.  
Please be sure to have your Windows 98SE installation CD available as it may be  
required during installation.  
1. Before connecting your MicroNet USB Storage Device,  
please insert the included driver CDRom and run  
1. Before connecting your MicroNet Firewire Storage Device,  
please install the Microsoft 1394 (Microsoft Support  
Document Q242975). This update can be downloaded from  
Microsoft or from the MicroNet Support web page.  
2. Connect and power on your MicroNet Firewire Storage Device,  
and reboot your computer.  
3. Plug and Play will detect your MicroNet Firewire Storage  
Device and will automatically install the necessary software.  
Should any Version Conflict dialog boxes pop up, click YES  
to keep the existing files. Do not click on the cancel button, as  
this will prohibit the drivers from loading properly. These dia-  
log boxes will only display the first time you install your  
external storage.  
4. Right click on “My Computer” on your desktop, and select  
Properties. Click on the Device Manager tab (see top illustra-  
tion,) locate the new device, and click the “Properties” button  
5. Under the “Settings” Tab, check the “removable” checkbox  
(See bottom illustration)  
6. Press the “OK” button and reboot. Your MicroNet Firewire  
Storage Device is ready to use!  
“TPPINST.EXE”. Select Complete Install, and reboot the  
computer when prompted. This is only required the first time  
you install a MicroNet USB Storage Device.  
2. Connect and power on your MicroNet USB Storage Device  
3. Plug and Play will detect your MicroNet USB Storage Device  
and will automatically install the necessary software.  
4. Right click on “My Computer” on your desktop, and select  
Properties. Click on the Device Manager tab (see top illustra-  
tion,) locate the new device, and click the “Properties” button  
5. Under the “Settings” Tab, check the “removable” checkbox  
(See bottom illustration)  
6. Press the “OK” button and reboot. Your MicroNet USB  
Storage Device is ready to use!  
Windows ME/2000/XP  
Windows ME, 2000, and Windows XP will autodetect your MicroNet  
Storage Devices and mount them automatically!  
Note: in order to reach USB 2.0 speeds, you must have a com-  
puter or host adapter that has USB 2.0 support. Your MicroNet  
storage device will autosense the highest available connection  
speed.  
Windows 2000/XP  
Windows ME, 2000, and Windows XP will autodetect your MicroNet  
Storage Devices and mount them automatically!  
Should you experience any trouble installing your drive,  
please do not hesitate to contact us. Our support staff is  
always ready to assist you!  
Page 4  
Page 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION - Hardware  
SOFTWARE INSTALLATION- USB  
MacOS Systems  
Fire w ire  
Note for OS8-9 users: Please install Hard Disk  
Speedtools prior to connecting your MicroNet  
Disk Drive.  
Installation on a MacOS system requires MacOS 8.6 or greater. The USB drivers for  
your product do not support operating systems earlier than MacOS 8.6. No Additional  
software is necessary for installation under OS-X.  
Power Switch  
• Plug the included power cable into the power  
connector on your drive and plug the other  
end into a grounded electrical outlet.  
FireWire™ Ports  
Power Connector  
Please note that MicroNet Hard Disks are preformatted as Microsoft FAT volumes  
from the factory in order to provide Mac and PC compatibility.  
OS8.6-9.x  
• Press the power switch on the drive to turn on your MicroNet storage device, then  
power-on your computer.  
1. Insert the included Hard Disk Speedtools Installation CD into your  
computer’s CD-ROM drive.  
• Connect one end of the included 6-pin IEEE-1394 peripheral cable to one of the  
FireWire ports on the rear of your drive.  
2. Double click the Hard Disk Speedtools installer Icon.  
3. Check the Hard Disk Speedtools and the HDST USB sup-  
port extensions in the installer as illustrated, and press the  
install button.  
• Connect the other end to one of your computer’s FireWire ports, or to the  
FireWire port on a device already connected to your computer.  
IMPORTANT: Be sure to turn ON your FireWire drive BEFORE  
connecting it to your computer.  
4. Follow the on-screen instructions to finalize the installa-  
tion. Please make sure that you have  
no other Firewire disk extensions  
enabled besides Apple’s Firewire  
Enabler and Firewire Support.  
5. If you intend to use your Disk Drive  
under MacOS exclusively, run Hard  
Disk Speedtools, select your drive  
and press the “setup” button.  
6. Your MicroNet Firewire storage  
device is ready to use!  
Ab o u t Fire W ire (IEEE-1 3 9 4 )  
FireWire was invented by Apple Computer in the early 1990s and was adopted by the  
IEEE as a standard (IEEE 1394) in 1995 as a cross-platform high-speed serial technology  
that can move large amounts of data between computers and peripheral devices. It fea-  
tures simplified cabling, hot swapping, and transfer speeds of up to 400 megabits per  
second. FireWire is one of the fastest peripheral standards ever developed, which  
makes it great for use with multimedia peripherals such as video cam-  
corders and other high-speed devices like the latest hard disk drives, cd-  
recorders, scanners, and printers.  
More information, along with the latest MacOS drivers for FireWire can always be found at:  
USB  
OS-X 10.1 and Jaguar  
• Connect the square end of the included peripheral cable to the USB port on the  
rear of your MicroNet USB Storage Device.  
If you intend to use your Disk Drive under MacOS exclusive-  
ly, please launch the “Disk Utility” application located under  
Applications/Utilities folder. highlight your new drive and  
select the “Erase” tab. Select the desired filesystem format and  
click the “Erase” button. Your MicroNet FireWire Disk Drive  
is ready to use!  
• Connect the rectangular end of the cable to a free USB  
port on your computer or USB hub.  
• Connect the power cable to your USB Hard Disk Drive  
and plug it into a grounded outlet.  
USB Port  
• Press the power switch on the front of the drive to turn on your  
Power Connector  
MicroNet USB Storage Device.  
Power Switch  
Should you experience any trouble installing your drive,  
please do not hesitate to contact us. Our support staff is  
always ready to assist you!  
Note: in order to reach USB 2.0 speeds, you must have a computer or host  
adapter that has USB 2.0 support. Your MicroNet storage device will  
autosense the highest available connection speed.  
Page 3  
Page 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KVH Industries Satellite TV System TracVision C3 User Manual
Lanier Copier LD235 User Manual
Lennox Hearth Indoor Fireplace EDVCLNE B User Manual
LG Electronics Cell Phone VX 9400 User Manual
Logitech Computer Keyboard MK300 User Manual
Logitech Home Security System 750n User Manual
Magenta Home Theater System XR2000 User Manual
Marantz Home Theater System PM 17SA User Manual
Memorex Paper Shredder MPS2800 User Manual
Metra Electronics TV Antenna 99 3412 User Manual