MICRO HI-FI COMPONENT SYSTEM
HM-535
INSTRUCTION MANUAL
KENWOOD CORPORATION
COMPACT
DIGITAL AUDIO
FE
B60-5240-00 00 MA (K, T, M, X, E2)
0201
Download from Www.Somanuals.com. All Manuals Search And Download.
Before applying power
Special features
Playback capability of CD-R and CD-RW discs.
This unit can playback music data recorded in CD-R (Compact Disc Recordable) and CD-RW (Compact Disc
Rewritable).
However, some CD-R and CD-RW discs may not be playable on the CD player depending on the recording
characteristics of the recording equipment (including the pick-up), properties of the CD-R or CD-RW in use,
its recording condition and so on. Also note that a CD-R or CD-RW disc which has not been finalized cannot
be played back.
Convenient recording features
Versatile recording features are provided, allowing the user to select the desired one for each purpose.
÷ One-touch recording :
Pressing a single key starts the recording of all tracks or a single track in a CD.
÷ Program recording :
Your favorite tracks can be recorded in any desired order.
Versatile timer features
÷ Timer playback, timer recording :
Two timer programs (PROG 1, PROG 2) are available for timer playback (AI timer playback) or timer
recording. (With the AI timer playback, the playback volume increases gradually after the start of timer
playback.)
÷ Sleep timer :
This timer turns the unit off automatically when the set time has elapsed. It is convenient for example,
falling asleep while listening to music in the night time, etc.
In regard to demonstration
This unit is equipped with a demonstration function (only display). The demonstration consists of se-
quentialchangeofdisplayandindicatorsshowingtheoperations,buttheaudioitselfdoesnotchange.
The demonstration function can be canceled as follows.
"DEMO OFF" (To cancel demonstration):
Press the set/demo key during demonstration.
"DEMO ON" (To execute demonstration):
÷ This operates automatically when a power failure
has occurred or the plug of the power cable has
been pulled while the power was ON.
After turning power ON, press and hold the set/
demo key (for more than 2 seconds).
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before applying power
Accessories
Unpacking
Unpack the unit carefully and make sure that all the accessories are present.
AM loop antenna (1)
FM indoor antenna (1)
Remote control unit (1)
Batteries (R6/AA) (2)
AC plug adaptor (1)
Use to adapt the plug on the power
cord to the shape of the wall outlet.
(Accessory only for regions where use
is necessary.)
If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the unit was
shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the original carton and
packing materials in case you need to move or ship the unit in the future.
Keep this manual handy for future reference.
For the U.S.A.
For the U.S.A.
CAUTION
FCC WARNING
This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment
may cause harmful interference unless the modifica-
tions are expressly approved in the instruction manual.
The user could lose the authority to operate this equip-
ment if an unauthorized change or modification is
made.
Use of controls or adjustments or performance of pro-
cedures other than those specified herein may result in
hazardous radiation exposure.
IncompliancewithFederalRegulations,thefollowingare
reproductionsoflabels on, or inside the product relating
to laser product safety.
NOTE:
KENWOOD CORPORATION
2967-3, ISHIKAWA-CHO,
HACHIOJI-SHI,
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment may
cause harmful interference to radio communications, if
it is not installed and used in accordance with the in-
structions. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turn-
ing the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
TOKYO, JAPAN
KENWOOD CORP. CERTIFIES THIS EQUIPMENT
CONFORMS TO DHHS REGULATIONS NO. 21
CFR 1040.10, CHAPTER 1, SUBCHAPTER J.
Location: Back Panel
–
–
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is con-
nected.
Consult the dealer or an experienced radio / TV
technician for help.
–
–
EN
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before applying power
Contents
Caution : Read the pages marked
carefully to ensure safe operation.
Preparation section
Application section
Before applying power.......................................2
Various CD playback features ...............................29
Listening to the desired sequence (program playback) .. 29
Repeated playback..............................................................31
Playing tracks in a random order (random playback) ..... 32
Safety precautions......................................................... 2
Special features.....................................................................3
Accessories ............................................................................4
Convenient recording methods .............................33
One-touch edit recording (CD =TAPE) .......................... 34
Program recording (CD =TAPE) ...................................... 35
System connection ....................................................6
Connection of the System Accessories.............................6
Connection of Other Accessories
Listening to an AUX input source..........................36
Clock adjustment .....................................................37
Timer operation ........................................................38
Sleep timer (SLEEP).............................................................38
Setting the timer program
(Commercially Available Parts) ..................................... 8
Controls and indicators.............................................9
Display .....................................................................................9
Main unit ...............................................................................10
Operation of remote control unit ...................................... 12
(PROG. TIMER) .................................................................39
Basic section
Knowledge sections
Basic use method.....................................................14
Playback of CD .........................................................16
Playback of TAPE .....................................................18
Receiving broadcast station ..................................20
Collective presetting of stations....................................... 21
Channel space setting ........................................................ 21
Tuning to a non-preset radio station
Important Items.........................................................43
Maintenance ........................................................................ 43
Reference ..............................................................................43
In case of difficulty ..................................................45
Specifications...........................................................48
(Auto tuning, Manual tuning) ....................................... 22
One-by-one presetting (Manual preset).......................... 22
RDS (Radio Data System) (For U.K. and Europe) ........ 23
Searching for a desired program type (PTY search) .... 24
Recording on TAPE ..................................................26
®
As an ENERGY STAR Partner,
Kenwood Corporation has deter-
mined that this products meets the
®
ENERGY STAR guidelines for
energy efficiency. This product can save energy.
Saving energy reduces air pollution and lowers utility
bills.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
System connection
Connection of the System Accessories
This figure shows the method of connection between the main unit and provided accessories.
AM loop antenna
The supplied antenna is for indoor use. Place it as
CAUTION Note on Connection
Connect the components as shown in the diagram.
far as possible from the main system, TV set,
Only plug the power cord into a power outlet once
speakercordsandpowercord, andsetittoadirec-
connections are completed.
tion which provides the best reception.
CAUTION
The magnet in the speaker may cause color irregu-
larity to the TV or PC monitor. Place the speaker
farther away from the TV set or PC monitor.
\
Assemble
AM loop antenna
CAUTION
Be sure to adhere to the following, or proper ventila-
tion will be blocked causing damage or fire hazard.
÷ Do not place any objects impairing heat radiation
onto the top of the unit.
÷ Leave some space around the unit (from the largest
outside dimension including projection) equal to or
greater than, shown below.
Speaker (Right)
Top panel : 50 cm
Back panel : 10 cm
÷ Never short-circuit the "+" and "–" speaker cords.
÷ If the "+" and "–" polarity are inverted, the sound will be unnatural with unclear positioning of musical instru-
ments, etc.
÷ Be sure to insert all connection cords securely. If their connections are imperfect, the sound may not be
produced or noise may interfere.
÷ Before plugging or unplugging a connection cord, be sure to unplug the power cord from the wall AC outlet. If
connection cords are plugged or unplugged with the power cord left plugged in, malfunction or damage may result.
EN
6
Download from Www.Somanuals.com. All Manuals Search And Download.
System connection
FM indoor antenna
Malfunction of microcomputer
The supplied antenna is for temporary indoor use
only. For stable signal reception, we recommend
touseanoutdoorantenna. Removetheindooran-
tenna if you connect to an outdoor antenna.
If operation is not possible or erroneous display
appears even though all connections have been
made properly, reset the microcomputer by
referring to "In case of difficulty".
t
1 Connect the antenna to the antenna terminal.
2 Locate the position providing good recep-
tion condition.
3 Fix the antenna.
FM indoor antenna
AM
GND
FM
75Ω
ANTENNA
AM
GND
FM
75Ω
ANTENNA
Speaker (Left)
-
+
L
R
FRONT
SPEAKERS
(6-16Ω)
R
L
AUX
INPUT
DIGITAL
OUT
OPTCAL
-
+
POWER cord
L
TO WALL AC OUTLET
R
FRONT
SPEAKERS
(6-16Ω)
Speaker cord
How to connect speaker cords to the main unit
How to connect AM antenna cord to the main unit
1
2
3
1
2
3
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
System connection
Connection of Other Accessories (Commercially Available Parts)
CAUTION Note on Connection
FM outdoor antenna
Connect the components as shown in the dia-
gram. Only plug the power cord into a power
outlet once connections are completed.
Leadthe75ΩcoaxialcableconnectedtotheFMout-
door antenna into the room and connect it to the
FM 75Ω terminal. Please remove the indoor an-
tennaafteranoutdoorantennahasbeeninstalled.
FM outdoor antenna
* DIGITAL OUT jack (OPTICAL)
The DIGITAL OUT jack (OPTICAL) outputs the CD
signal.
AM
Antenna adaptor
(Commercially
GND
The CD signal can be recorded in digital format by
connecting a recorder to the DIGITAL IN jack
(OPTICAL).
Available Parts)
FM
75Ω
ANTENNA
AM
GND
FM
75Ω
ANTENNA
VCR, Analog turntable with built-in
RIAA equalizer (optional P-110), etc.
Audio output
Audio cord
-
+
L
R
FRONT
SPEAKERS
(6-16Ω)
R
L
AUX
INPUT
DIGITAL
OUT
OPTICAL
*
DIGITAL
OUT
OPTICAL
Optical fiber cable
Digital input
POWER cord
TO WALL AC OUTLET
cap
MD recorder or DAT etc.
÷ In case an associated system component is connected, also read the instruction manual of the component.
÷ Be sure to insert all connection cords securely. If their connections are imperfect, the sound may not be
produced or noise may interfere.
÷ Before plugging or unplugging a connection cord, be sure to unplug the power cord from the wall AC outlet. If
connection cords are plugged or unplugged with the power cord left plugged in, malfunction or damage may result.
EN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and indicators
Display
Thedisplaysgiveninthismanualareapproximationsonly. Theymaydifferfromwhatactuallyappearson
the display.
1
2
5
3
4
!
0
9
8
7
6
1 TAPE EQ. indicator
7 Time display indicators
2 CD-related indicators
8 RDS-related indicators
(For Europe and U.K.)
3 MUTE indicator, APS indicator
9 EX.BASS indicator, LOUD
4 Tuner-related indicators/Numeric
(Loudness) indicator
information display
0 O.T.E. (One-Touch Edit) indicator
5 Timer-related indicators
! Tape-related indicators
6 Character information display
AUTO POWER SAVE function
When the unit is ON and the unit is left for 30 minutes with CD or TAPE not operating, the unit is switched off
automatically by this function. This is convenient when you forgot to switch off the unit. This function can be
activated or deactivated by the following operation.
1 Select "APS
?".
2 Select "APS ON" or "APS OFF".
\
\
3 Set it.
(Press the set/demo key while the "?" mark is
blinking.)
÷ When the TUNER or AUX input is selected, APS op-
erates only when the volume is set to zero or when
MUTE is on.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlsandindicators
Main unit
1
2
3
4
#
$
5
6
7
%
^
8
9
0
!
@
1 Cassette holder
*
6 mode key
9
To load or eject a cassette tape, press the area marked
)push open on the cassette holder to open it.
Press to switch the function of the 4and ¢keys to
menu select mode. Press again to reset the function of
the 4and ¢keys to normal mode.
2 repeat key
⁄
%
Press for setting repeated playback.
7 set/demo key
39
Press to set or enter an item selected with the 4and
¢keys.
This key is also used for switching demonstration on/
off and the beat cancel function on while recording the
radio broadcast.
3 sound key
Press to select EX. BASS or LOUD sound effect.
4 Remote sensor
#
This window receives signals from the remote control
unit.
8 Headphone jack
%
5 volume knob
$
Connect headphone with a stereo mini-plug
(optionally available).
Turn this knob for volume adjustment.
About the one-touch operation function
This unit incorporates the one-touch operation function for the user's convenience.
With this function, pressing any key enclosed in
playback (or reception).
while the unit is in standby mode immediately start
EN
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlsandindicators
9 rec key
¶
7Tuning Mode key
Press to start tape recording. Pressing this key during
recording initiates record-pause after leaving a no-
sound blank of about 4 seconds.
CD, TAPE :
&(
Press to stop a disc or tape operation.
TUNER :
™
Press to switch between the AUTO (auto tuning,
stereo reception) and MONO (manual tuning,
monaural reception) modes.
0 O.T.E. key
›
Press to start recording CD onto a tape with one-touch
operation.
Pressing this key during CD playback records only the
track being played onto tape. Pressing it while CD is in
stop state will record all the CD tracks onto tape.
Standby mode:
‡
Press to display the clock.
@ ) CD open/close key
^
Press to open or close the CD tray.
! 4and ¢multi control keys
In the normal mode, these are used to
# Display panel
– skip CD tracks
– fast forward or rewind tape
– select a preset radio station
&
(
)
$ Basic operation keys
AUX key
fl
Press to reproduce the external source component
In the menu mode (selected by pressing the mode key),
press these buttons to select the desired menu item. To
setorentersettingofthemenuitem,presstheset/demo
key.
connected to the AUX (analog auxiliary input) jacks.
TUNER /band key
)
Press to select the TUNER input.
This key is also used to select the received broadcast
band.
CD 6key
^
\
\
Press to select the CD input and start playback. During
CD playback, press to pause.
TAPE 23key
*
Press to select the TAPE (cassette deck) input and
start playback of a tape. Pressing this key during tape
playback switches the tape transport direction.
• Pressing these multi control keys switches the dis-
play contents.
% standby/timer indicator
Lights up when the unit is set to the Standby mode of
power.
"TAPE RVS"
(
"AUTO PRESET ?"or "AUTO MEMORY ?" ¡
Red
Green : Timer standby.
Off : The unit is On.
: Ordinary standby.
(Only when the TUNER input is selected)
"INPUT
?"
fl
(Only when the AUX input is selected)
^ POWER key (For U.S.A. and Canada)
$
$
"TIMER
"TIME ADJUST ?"
"APS ?"
?"
·
‡
9
key (For other countries)
Press to set the unit to On or Standby.
• Thefunctionofthesekeysreturnstothenormalmode
when they have not been operated for 20 seconds.
Standby mode
Whilethestandbyindicatorislit,asmallamountofpowerissuppliedtothesystemtobackupthememory.
This is called standby mode. Under the condition, the system can be turned ON by the remote control
unit.
EN
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlsandindicators
Operation of remote control unit
The keys on the remote control unit with the same names as on the main unit have the same function as
the keys on the main unit.
3 Basic operation keys
SET key
POWER
Press to set or enter an item selected with the 4and
¢keys.
1
1
4
2
5
8
0
3
6
TUNER/ BAND key
CD 6key
)
^
SLEEP
PGM
7
7
9
2
STOP 7/AUTO/MONO key
TAPE 23key
&™
*
CLEAR
10
SET
CD
6
TAPE 23
TUNER/BAND
4P.CALL ¢keys
CD :
AUTO/MONO
STOP 7
&
(
)
4P.CALL
¢
1
TUNING
¡
3
4
Used to skip CD tracks.
AUX
ENTER
O.T.E.
REC
TAPE :
PTY
TIME DISPLAY
•
•
TAPE EQ.
Used to fast forward or rewind tape.
8
9
0
SOUND
TONE
REPEAT RANDOM
TUNER :
5
6
Used to receive a preset radio station.
1TUNING ¡keys
MUTE
VOLUME
CD, TAPE :
&(
RC-F0300
Used to fast-forward or fast-reverse the played
audio.
TUNER :
Used to select a radio station.
™
AUX key
fl
Infrared ray system
Press to reproduce the external source component
connected to the AUX (analog auxiliary input) jacks.
Model : RC-F0301E (For UK and Europe)
: RC-F0301 (For other countries)
ENTER key
™
1 POWER key
$
Press to enter a radio station in the preset memory of
the tuner.
Press to set the unit to On or Standby.
2 SLEEP key
°
ª
4 O.T.E. key
fi
Press to set the sleep timer.
REC key
¶
(
PGM key (CD)
Press to program tracks in the desired sequence.
TAPE EQ. key
CLEAR key (CD)
º
5 REPEAT key (CD)
⁄
Press to clear a programed track(s).
Press for setting repeated playback.
EN
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlsandindicators
TIME DISPLAY key (For other countries)
RANDOM key (CD)
¤
Press for setting playback of tracks in a random order.
&
Press to switch the displayed time information on CD.
6 VOLUME keys
$
Press to adjust the volume.
9 SOUND key
%
Press to switch the sound effect to EX.BASS or
LOUD.
7 Numeric keys
&™
Used to select a CD track number or recall a preset
station of the tuner.
TONE key
%
Press to adjust the tone.
8 ÷PTY÷TIMEDISPLAYkey(ForEuropeandU.K.)
0 MUTE key
%
&¢
Press to mute the audio temporarily.
Used at the time of program type detection.
Press to switch the displayed time information on CD.
Loading batteries
1 Remove the cover.
2 Insert batteries.
3 Close the cover.
÷ Insert two R6 ("AA"-size) batteries following the polarity indications.
Operation
Operating range (approx.)
Afterpluggingthepowercordofthisunit,pressthe
POWER ( ) key of the remote control unit to turn
the system ON. When the system is turned ON,
press the key of the function to be operated.
Remote sensor
6 m
÷ When pressing more than one remote control keys
successively, press the keys securely by leaving an in-
terval of 1 second or more between keys.
30˚
30˚
÷ The provided batteries are intended for use in operation checking, and their service life may be short.
÷ When the remote controllable distance becomes short, replace both of the batteries with new ones.
÷ If direct sunlight or the light of a high-frequency fluorescent lamp (inverter type, etc.) is incident to the remote
sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.
EN
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic use method
Enhancement of bass
The system is switched ON
or STANDBY
Enhancement
of bass
Listening through
headphone
Muting the sound temporarily Tone adjustment
1. Set the key to ON.
Pressing the key when the unit is ON turns it off (Standby mode
of power).
or
÷ Pressing the TUNER/band, CD 6, TAPE 2 3 or AUX key also turns
power on and starts playback (reception) of the corresponding input.
(One-touch operation)
÷ When the CD or TAPE input is selected while the corresponding disc or
tape has been loaded, it immediately starts to play.
2. Selecting the desired output.
Example:
To select the CD input
CD
^
*
TAPE
TUNER (Broadcasts) )
AUX (External input) [Adjusting the AUX input level fl]
÷ Pressing the TUNER/
band, CD 6, TAPE
2 3 or AUX key se-
lects the correspond-
ing input.
When CD has been selected.
The volume
decreases
The volume
increases
3. Volume adjustment.
÷ The display shows a reference value.
Volume display
EN
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic use method
Listening through headphone
Tone adjustment
Insert the headphone plug into the headphone jack.
Remote control unit only
The lowest and highest frequency bands can be
adjusted independently.
1 Select the frequency band.
÷ Headphone with a stereo mini plug can be con-
nected.
TONE
÷ The sound from all speakers are cut off.
Muting the sound temporarily
Remote control unit only
Each press switches the operation.
1 "BASS"(lowfrequency)adjustment
MUTE
÷ Press again to resume the original volume.
÷ This is also canceled when the volume is changed.
2 "TREBLE" (high frequency) adjust-
ment
Enhancement of bass
3 Normal mode
SOUND
(Go to step 2 within 8 seconds.)
2 Adjust.
Each press switches the modes as follows.
4
P.CALL
4
1 "EX.BASS" lights.
Thelowfrequenciesareenhancedregardless
of the current volume level.
2 "LOUD" (Loudness) lights.
Thelowfrequenciesareenhancedaccording
tothecurrentvolumelevel.(Effectiveduring
low-volume listening.)
(Toadjusttheotherfrequencyband,repeatsteps
1 and 2 for it.)
3 Both indicators off.
Canceled.
÷ The levels of both "BASS" and "TREBLE" can be ad-
justed in 2 steps in the range between – 8 and +8.
÷ Adjusting the tone while the "LOUD" or "EX.BASS"
indicator is lit turns it off and cancels the sound en-
hancement mode.
÷ Adjusting the tone while the "LOUD" or "EX.BASS"
indicator is lit turns it off and cancels the sound en-
hancement mode.
EN
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback of CD
WhenadiscisplacedintotheCDplayerinadvance, theunitwillbeswitchedonautomaticallybypressing
the CD 6key, and playback will start.
Start playback/ To pause playback
Playback from desired track
To stop
playback
To stop playback
Skipping tracks
To fast forward and
backward
Skipping tracks
1. Load a disc.
1 Press the )key.
2 Place a disc.
3 Press the )key.
The label side
facing up.
÷ Do not touch the played side of
disc.
÷ Be sure to place a disc horizontally.
Placing it with an inclination will re-
sult in malfunction.
2. Start playback.
Elapsed time of
track being played
÷ After a few seconds,
play starts from track
No.1.
Track No. being played
EN
16
Download from Www.Somanuals.com. All Manuals Search And Download.
PlaybackofCD
Start playback/ To pause playback
To fast forward and backward
Remote control unit only
1
TUNING
1
Backward
search
Forward
search
CD
6
÷ Press and hold one of the keys during playback.
Normal playback resumes at the point where the
key is released.
÷ Each press pauses and plays the CD alternately.
To stop playback
Skipping tracks
4
P.CALL
4
To skip
To skip
AUTO/MONO
backward
forward
STOP 7
÷ The track in the direction of the key pressed is
skipped, and the selected track will be played from
the beginning.
÷ When the 4key is pressed once during playback, the
track being played will be played from the beginning.
÷ To skip further to a track located before the current
track, press the 4key quickly.
Playback from desired track
Remote control unit only
Select the desired track No.
÷ Tracks can be skipped by pressing the 4or ¢ key
even when the CD is in stop mode. In this case, play-
back starts automatically from the point reached by
skipping.
1
4
7
10
2
5
8
0
3
6
9
Eject the CD
Press the numeric keys as shown below....
To select track No. 23 : +10
To select track No. 40 : +10
X
2, 3
4, 0
÷ The CD tray will open. (Pressing the key again
X
closes the CD tray.)
Time display on CD player
1 Elapsed time of track being played
EachpressoftheTIMEDISPLAYkeychangesthe
displayed contents.
Remote control unit only
2 Remaining time of track being played
÷
÷
PTY
TIME DISPLAY
TIME DISPLAY
("REMAIN" lights up)
or
3 Elapsed time of entire disc
(For U.K. and Europe)
(For other countries)
("TOTAL" lights up)
÷ Only time information 1 and 2 can be displayed dur-
ing single-track repeated playback or random playback.
÷ In the program mode, display 3 shows the elapsed
time of the entire program and display 4 shows the
remaining time of the entire program.
4 Remaining time on entire disc
("TOTAL REMAIN" lights up)
÷ When the displayed time is 200 minutes or more,
the display shows "– – : – –".
EN
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback of TAPE
If you load a tape in the cassette deck in advance while the power is off, pressing the TAPE 23key will
turns the power on automatically and starts the tape playback.
Selection of TAPE equalizer (TAPE EQ.)
Start playback
To stop playback
Start playback
To stop playback
To wind tape
To wind tape at high speed
at high speed
1. Load a cassette tape.
1 Press the area marked )push open to open the cassette holder.
2 Insert a tape.
3 Press the area marked )push open to close the cassette holder.
Donotuseacassettewithmorethan90-minuterecordingtime, forthe
tape used with such a cassette is very thin and tends to cause troubles
such as entanglement around the pinch roller or cutting off tape.
÷ The tape deck of the unit can play Normal (Type ) tapes.
÷ When there is a tape slack, wind the tape before loading.
r
2. Start playback.
Press the TAPE 23key.
Displayed when the deck is loaded with a tape.
Tape
counter
Reverse mode
indication
Transport direction indicators
Transport direction indicators:
Indicates the tape transport direction during playback or recording by lighting
of 2or 3. This direction is the direction stored in memory when the tape was
last stopped.
EN
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback of TAPE
To wind tape at high speed
Selection of reverse mode
Main unit only
To fast wind in
To fast wind in
direction |
direction \
1 Select "TAPE RVS".
1
TUNING
1
\
\
÷ Press the STOP 7key to stop fast winding.
÷ The same operation is also available with the 4
and ¢keys on the main unit.
2 Select.
Selection of TAPE equalizer (TAPE EQ.)
WhenplayingatapeprerecordedwithNoiseRe-
duction system (such as the DOLBY NR) ON, be
sure to set the "TAPE EQ." ON for playback.
1 " " : (ONE-WAY)
Only one side is played back (recorded), and
then the tape stops.
2 " " : (REVERSE)
Lit when "TAPE EQ." is ON
Both sides are played back (recorded), and
TAPE EQ.
then the tape stops.
3 "
" : (ENDLESS)
Both sides are played back endlessly. (The
tape stops after recording onto both sides.)
Each press switches the modes as follows.
(The initial setting is " "(REVERSE))
1 "TAPE EQ." ON
3 Set it.
(TAPE equalizer is used)
2 "TAPE EQ." OFF
(TAPE equalizer is not used)
÷ Select the "TAPE EQ." ON mode according to the
recording condition of the tape.
A tip for use of the tape counter
The tape counter is set to "0000" when a cassette
tape is loaded. By writing down the counter read-
ing in case you want to interrupt recording (play-
back) in the middle of the tape, the memo will be
helpful as a reference for locating the same posi-
tion when continuing the recording (playback) the
next time. The tape counter figure decreases dur-
ing recording or playback of the back side (while
the 2tape transport indicator is lit). To set the tape
counter to "0000", open the cassette holder once.
Then the counter will be reset.
To stop playback
AUTO/MONO
STOP 7
EN
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving broadcast station
WhentheTUNER/bandkeyispressed,theunitwillautomaticallybeswitchedonandreceptionstatuswillbereached.
One-by-one presetting (3) ™
Tuning to a
non-preset
radio station
(2) ™
Tuning to a non-
preset radio
station (1) ™
One-by-one preset-
ting (2,4) ™
Collective presetting
of stations
1. Select the tuner input.
Each press of the TUNER/band key switches the band as follows.
FM
AM
2. Preset a radio station in memory.
Collective presetting of stations
¡
Follow the procedure in "Collective presetting of stations" to preset auto-
matically the tunable radio stations in your area.
÷ Once the stations are stored by auto presetting, you are not required to
repeat this procedure the next time you listen to radio. However when
you shift to another location whereby the broadcast station frequencies
are different, you will have to re-execute the presetting of stations.
One-by-one presetting (Manual preset)
™
A station can also be tuned even when it is not preset. For details, read
"Tuning to a non-preset radio station (Auto tuning, Manual tuning)".
3. Tuning (Preset Call)
÷ If radio stations have al-
ready been stored with
auto presetting or manu-
al presetting, select a sta-
tion using the 4, ¢
key. Each press of the
same key switches the
preset stations in se-
quence.
The "TUNED" indicator lights
when a station is received
Frequency display
When ¢is pressed : 1=2=3 ... 28=29=30=1...
When 4is pressed : 30 =29 =28 ..... 3 =2 =1 =30.....
÷ When a key is held depressed, preset stations will be skipped at an inter-
val of about 0.5 second.
÷ To select a preset station from the remote, use the 4P.CALL ¢key
or numeric keys.
EN
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Receivingbroadcaststation
Collective presetting of stations
AUTO MEMORY ..... For U.K. and Europe
AUTO PRESET ........ For other countries
Main unit only
1 Select the tuner input.
2 Select "AUTO MEMORY ?"
(or "AUTO PRESET ?").
÷ A maximum of 30 stations of the band presently being
received will be preset.
\
\
÷ When there are many stations and the intended sta-
tion has not been preset, please also use "One-by-one
presetting (Manual preset)".
Channel space setting (Except for U.S.A., Canada, U.K., Europe and Australia)
The space between radio channels has been set to the one that prevails in the area to which the system is shipped.
However, if the current channel space setting does not match the setting in the area where the system is to be used,
forinstancewhenyoumovefromarea1orarea2showninthefollowingtableorviceversa, properreceptionofAM/
FM broadcasts cannot be expected. In this case, change the channel space setting in accordance with your area by
referring to the following table.
Main unit only
Each press switches the space frequency alter-
1 Turn power on.
nately.
1 FM 50 k
2 While holding TUNER/band key pressed,
turn the volume knob to select "FM 50 k" or
"FM 100 k".
2 FM 100 k
÷ AtFM50kHz,thecorrespondingAMfrequencyis9kHz.
AtFM100kHz,thecorrespondingAMfrequencyis10kHz.
CHANNEL
Space Frequency
3 Set it.
Area
USA, Canada and South
American countries
FM: 100 kHz
AM: 10 kHz
1
2
FM: 50 kHz
AM: 9 kHz
Other countries
EN
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Receivingbroadcaststation
Tuning to a non-preset radio station (Auto tuning, Manual tuning)
Select the tuning mode according to the radio
wave receiving condition.
÷ In MANUAL mode, FM stations are received in mon-
When the receiving condition is good:
AUTO mode
aural.
When it is poor due to weak radio waves:
MANUAL mode
Each press alternates the mode.
1 "AUTO" :
Stereo reception ("AUTO" lit)
2 "MANUAL" :
1 Select the AUTO or MANUAL mode.
Monaural reception ("AUTO" not lit)
÷ Normally, use the AUTO (Auto tuning, stereo reception)
AUTO/MONO
mode.
STOP 7
In AUTO mode :
The next preset station can be received automatically
every time the TUNING (1or ¡) key is pressed.
2 Tune a station.
In MANUAL mode :
1
TUNING
1
To decrease
frequency
To increase
frequency
Press the TUNING (1or ¡) key repeatedly until the
desired station is received. The desired station can
also be received by holding the TUNING (1 or ¡)
key depressed until its frequency is displayed.
One-by-one presetting (Manual preset)
Remote control unit only
1 Perform the procedure in "Tuning to a non-
preset radio station (Auto tuning, Manual
tuning)" to receive the station to be preset.
2 Press the ENTER key during reception.
"MEMORY" lights (for approx. 20 sec.)
ENTER
÷ A maximum of 30 stations of the band presently be-
(Proceed to step 3 while "MEMORY" is lit.)
ing received will be preset.
3 Select one of the preset numbers from
1 to 30.
1
4
7
10
2
5
8
0
3
6
9
4
P.CALL
4
÷ If several stations are preset under the same num-
ber, the previous memory is replaced with the latest
memory contents.
4 Press the ENTER key again.
ENTER
(Repeat steps 1, 2, 3 and 4 to preset other sta-
tions)
EN
22
Download from Www.Somanuals.com. All Manuals Search And Download.
RDS (Radio Data System)(For U.K. and Europe)
RDS is a system which transmits useful information (digital data) for FM broadcasts together with the broadcast
signal. Tuners and receivers designed for RDS reception can extract the information from the broadcast signal for
use with various functions such as automatic display of the station name.
This unit is equipped with the following functions utilizing RDS data :
PTY(ProgramTypeIdentification)Search:¢
The tuner automatically searches for a station which is
currently broadcasting a specified program type (genre).
The "RDS" indicator lights up when an RDS broad-
cast (signal) is received.
PS (Program Service Name) Display :
When an RDS broadcast is received, the station name
is automatically displayed.
÷ Some functions may not be provided or be given dif-
ferent names depending on countries or areas.
Before using RDS
For reception of RDS stations, the auto memory function must be used to preset the stations. During the auto
memory function, the presetting sequence priority will be given to the RDS stations.
EN
23
Download from Www.Somanuals.com. All Manuals Search And Download.
RDS (RadioDataSystem)
Searching for a desired program type(PTY search)
By specifying the type of program (genre) you want to listen to, the tuner automatically searches for a station which
is currently broadcasting a program of the specified type.
However, if a station is not preset by auto memory, "NO DATA" will flash instead of the program (genre) type and
PTY search is not available.
Set the reception band to FM. Preset RDS stations with the auto memory function.
¡
Select the PTY search mode.
1
Remote control unit only
÷
÷
PTY
TIME DISPLAY
When an RDS broadcast is received, the program type
is shown on the display. If no PTY data is available, or if
the station is not an RDS station, "NONE" is displayed.
Select the desired program type.
2
Use program type table on the right for your convenience.
Program type table
4, ¢keys Program Type Name
Display
POP M
Pop Music
Rock Music
Easy Listening Music
4
DOWN
Selection with the 4or ¢key.
ROCK M
EASY M
LIGHT M
CLASSICS
OTHER M
NEWS
Light Classical
Serious Classical
Other Music
News
4
P.CALL
4
Current Affairs
Information
Sport
Education
Drama
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
UP
¢
Culture
Science
Varied
CULTURE
SCIENCE
VARIED
Select while "PTY" is lit.
Weather
Finance
Children's programs
Social Affairs
Religion
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
Phone In
Travel
The desired program type can be selected
with the 4 or ¢ key from 29 types. Press
the key and release it when the desired type is
displayed.
Leisure
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary
FOLK M
DOCUMENT
EN
24
Download from Www.Somanuals.com. All Manuals Search And Download.
RDS (RadioDataSystem)
Start the search.
3
When searching for a Rock Music broadcast
Display while the tuner is searching.
÷
÷
PTY
TIME DISPLAY
Program type name display.
÷ No sound is heard while "PTY" is blinking.
÷ If a program of the desired type cannot be found,
"NO PROG" is displayed, then after several seconds
the display returns to the original display.
When a station is received.
Goes off
÷ If a program of the desired type is found, that program
is received and the program type name display
changes to the station name display.
Station name display.
To change to a different program type :
Repeat steps 1, 2, 3.
EN
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording on TAPE
The tape deck of the unit can record signals only on Normal (Type ) tapes. It cannot record on High (Type ) and
Metal (Type ) tapes.
Stop the recording
Stop the recording
Start recording/ Pause the recording
1. Load a tape in deck.
1 Press the area marked ) push open to open the cassette
holder.
2 Insert a tape.
3 Press the area marked ) push open to close the cassette
holder.
Donotuseacassettewithmorethan90-minuterecordingtime, forthe
tape used with such a cassette is very thin and tends to cause troubles
such as entanglement around the pinch roller or cutting off tape.
÷ When there is a tape slack, wind the tape before loading.
r
2. Select the tape transport direction.
To reverse the transport direction :
1 Press the TAPE 2 3 key.
2 Stop playback.
÷ When recording is started, the tape is transported in the direction se-
lected in this step.
Check the tape transport direction indicator.
*
÷ Search the position you want to start recording in advance.
EN
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording on TAPE
3. Set the recording condition.
Select the reverse mode. (
÷ Check the tape transport direction before starting recording. If it is set to
the reverse direction, only one side of tape can be recorded regardless of
the reverse mode setting made here.
÷ The tape equalizer is defeated during recording.
Select an input source other than
"TAPE"
4. Select the source to be recorded.
CD
Example:
To select the CD input
TUNER (Broadcasts)
AUX (External input) [Adjusting the AUX input level fl]
÷ If a CD has already
been loaded, it starts to
play now. Press the 7
key to stop it.
The character information display shows the re-
cording input source.
5. Start recording.
1 Press the rec key.
2 Play (or tune) the input source to be recorded.
While recording from tuner input, beat sound can be minimised by
pressing the set/demo key.
Each press switches the modes as follows.
1 "BEAT CANCEL ON" :
(Beat Cancel is activated)
2 "BEAT CANCEL OFF" :
(Beat Cancel is deactivated)
÷ Recording stops automatically when the tape side (s) to be recorded have
been fully recorded.
Pause the recording
Stop the recording
Lights
÷ Press the rec key during recording. It pause after
leaving a non-recorded blank of 4 seconds. (Press
the key again to resume recording.)
EN
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording on TAPE
Points in CD recording
When recording CD tracks onto a tape, if you
leavethecassettedeckinrecord-pausemodebe-
forehand, the cassette deck recording can be
started when the CD starts to be played.
1 Put the CD player in pause mode.
2 Select the track to be recorded with the
skip (4, ¢) keys. (The CD player pauses
at the beginning of the selected track.)
3 Put the cassette deck in Record-pause
mode. (Press rec key twice)
4 Start playing the CD. (Recording starts)
÷ To stop recording, press the 7 key.
EN
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Various CD playback features
Listening to the desired sequence(program playback)
Use the following procedure to program desired tracks in a desired order. (up to 32 tracks)
Select the CD input.
1Select "PGM" mode.
Press in stop mode
PGM
2Select track numbers in the order you want to play them.
1 Select the track.
Program position of the track
to be selected next.
1
4
7
10
2
5
8
0
3
6
9
Selection of tracks
Press the numeric keys as shown below....
(Go to step 2 within 20 seconds.)
To select track No. 23 : +10
To select track No. 40 : +10
X
2, 3
4, 0
X
2 Confirm the selection.
÷ Up to 32 tracks can be programed. When "PGM FULL" is
displayed, no more tracks can be programed.
÷ If you made a mistake, press the CLEAR key and enter
the track No. again.
SET
÷ When a track No. is entered, the track will be added to
the end of the existing program.
(Toselectmorethanonetrack,repeatsteps1and
2 for each track.)
÷ When the total time of CD program is 200 minutes or
--: --
more, the time display shows "
".
3Start playback.
÷ Tracks will be played in the order they were pro-
gramed (following the program numbers).
÷ When the 4 key is pressed once during playback,
the track being played will be played from the
begining.
CD
6
To skip further to a track preceeding the current track,
press the 4 key twice repeatedly.
÷ When the ¢ key is pressed during playback, play will
skip to the next track in the program.
EN
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Various CD playback features
To add a track to an existing program
1 Select the track number to be added with
the numeric keys.
Press in stop mode
1
4
7
10
2
5
8
0
3
6
9
Press the numeric keys as shown below....
To select track No. 23 : +10
To select track No. 40 : +10
X
2, 3
4, 0
X
2 Press the SET key.
÷ Up to 32 tracks can be programed. When "PGM FULL" is
displayed, no more tracks can be programed.
÷ If you made a mistake, press the CLEAR key and enter
the track No. again.
SET
÷ When a track No. is entered, the track will be added to
the end of the existing program.
To clear a programed track
Press in stop mode
CLEAR
P-5 has been deleted
÷ Each time the key is pressed, the last track in the pro-
gram is cleared.
To clear the entire program
Press in stop mode
Goes off
PGM
The program mode is canceled when the unit is turned off or the programed disc is ejected. The set program is
cleared entirely at this time.
EN
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Various CD playback features
Repeated playback
You can repeatedly listen to a favorite track or disc.
Select the CD input.
Setup for repeating a single track
÷ If the "PGM" indicator is lit, turn it off by pressing the
PGM key in stop mode to cancel the program mode.
1 Confirm that the "PGM" indicator is not lit.
Confirm that this is not lit.
PGM
2 Play the track to be repeated.
CD
6
Each press switches the repeat mode.
3 Select "
1".
1 "
1"
one repeat
REPEAT
2 "
"
all repeat
3 Off....
Repeat deactivated
Setup for repeating all tracks in a disc
÷ If the "PGM" indicator is lit, turn it off by pressing the
1 Confirm that the "PGM" indicator is not lit.
PGM key in stop mode to cancel the program mode.
Confirm that this is not lit.
PGM
2 Select " ".
REPEAT
3 Start playback.
Each press switches the repeat mode.
1 "
1"
CD
6
one repeat
2 "
"
all repeat
3 Off....
Repeat deactivated
EN
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Various CD playback features
Setup for repeating selected tracks
Each press switches the repeat mode.
1 Program the track sequence according to
1 " " all repeat
2 Off.... Repeat deactivated
steps 1 to 2 of "Listening to the desired
sequence (program playback)".
ª
2 Select " ".
REPEAT
÷ All selected tracks will be repeated.
3 Start playback.
To stop repeated playback
CD
6
PresstheREPEATkeyrepeatedlyuntiltherepeat
mode is switched off.
÷ The "
" indicator turns off and playback according
to the current CD player mode.
Playing tracks in a random order (random playback)
As the titles each time are selected randomly, the music can be enjoyed without getting tired of it.
Select the CD input.
1 Confirm that the "PGM" indicator is not lit.
÷ If the "PGM" indicator is lit, turn it off by pressing the
PGM key in stop mode to cancel the program mode.
PGM
Each press switches the modes as follows.
1 "RDM" on (Random playback)
2 Press the RANDOM key.
2 "RDM" off (Normal playback)
RANDOM
÷ Playback stops after each track has been played once.
÷ The random playback can also be repeated by pressing
the REPEAT key.
To select another track in the middle of playing one
To cancel random playback
Press so that the "RDM" indicator is turned off.
4
P.CALL
4
RANDOM
÷ Pressing the 4 key returns the playback position to
÷ The "RDM" indicator goes off and the playback in order
the beginning of the track being played.
of the tracks starts from the track being played.
EN
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient recording methods
Thisunitprovidesthefollowingrecordingfeaturesinadditiontonormalrecording.Selecttheappropriate
method according to the purpose of recording.
The tape deck of the unit can record signals only on Normal (Type ) tapes. It cannot record on High (Type ) and
Metal (Type ) tapes.
To record CD with a simplified method (CD = TAPE)
›
All-track recording
Records all tracks in a CD onto a tape.
\
\
Records only one CD track being played onto a tape.
(Thisisconvenientforrecordingofdesiredtracksfromadisc
being heard for the first time.)
Single-track recording
To record desired CD tracks by reordering them (CD = TAPE)
fi
Recording of programed tracks in the programed order.
(Convenient for recording only the desired CD tracks in the
desired order.)
Program recording
\
With recording onto tape, the track will be interrupted for the part of the guide tape at the tape reversal, where
recording is not possible. Please use single-side recording if this is to be avoided.
EN
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient recording methods
One-touch edit recording (CD =TAPE)
Records all tracks in a CD with a simple operation. (All-track recording)
Records a single CD track being played from the beginning. (Single-track recording)
The tape deck of the unit can record signals only on Normal (Type ) tapes. It cannot record on High (Type ) and
Metal (Type ) tapes.
Be sure to put the cassette deck in stop mode.
1Make preparation for recording.
1 Perform steps 1 to 3 of the procedure in "Recording on TAPE".
2 Ensure that the "PGM" and "RDM" indicators are not lit.
3 Insert disc in the CD player.
§
÷ If the "PGM" indicator is lit, turn it off by pressing the PGM key in stop mode to cancel the program mode.
÷ If the "RDM" indicator is lit, turn it off by pressing the RANDOM key to cancel the random play mode.
2Check the current play mode of the CD player.
All-track recording
Single-track recording
If it is in play mode, stop it.
Select the desired CD track and play it.
÷ When step 3 is performed in the middle of CD play-
back, the current track will be recorded from the begin-
ning.
(To record other tracks, repeat steps 2 and 3 for each
track)
Start recording.
3
If you are operating the remote, the same effect
as step 3 can be obtained by simply pressing the
O.T.E. key to start recording.
÷ When either playback or recording stops, the other op-
eration is stopped automatically.
To interrupt a recording
At the end of the recording
Cassette deck
:
Stop is executed after an unre-
corded portion of about 4 sec.
has been produced.
(Recording and playback will be stopped)
EN
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient recording methods
Program recording(CD =TAPE)
Desired CD tracks can be programed in the desired sequence and recorded onto a tape.
The tape deck of the unit can record signals only on Normal (Type ) tapes. It cannot record on High (Type ) and
Metal (Type ) tapes.
Be sure to put the cassette deck in stop mode.
1Make preparation for recording.
1 Select the CD input.
2 Ensure that the "RDM" indicators are not lit.
3 Perform steps 1 to 3 of the procedure in "Recording on TAPE".
§
4 Insert disc in the CD player.
÷ If the "RDM" indicator is lit, turn it off by pressing the RANDOM key to cancel the random play mode.
2Program the desired sequence of CD tracks.
Perform steps 1 and 2 of the procedure in "Lis-
÷ When the PGM key is pressed to cancel the edited con-
tening to the desired sequence (program play-
tents, the entire editing contents will be erased. º
back)".
ª
÷ Tracks programed beyond the available tape recording
time will be interrupted in the middle.
Start recording.
3
÷ Recording starts from the first track in the program and
ends after having recorded the entire programed
tracks.
÷ Recording stops automatically when the program play-
back of CD has completed.
÷ When either playback or recording stops, the other op-
eration is stopped automatically.
If you are operating the remote, the same effect as
step 3 can be obtained by simply pressing the
O.T.E. key to start recording.
To interrupt a recording
At the end of the recording
Cassette deck
:
Stop is executed after an unre-
cordedportionofabout4sec.has
been produced.
(Recording and playback will be stopped)
EN
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to an AUX input source
Select AUX (external input).
1
Play the connected equipment.
Adjust the volume.
2
3
Adjusting the AUX Input Level
Thisadjuststheinputlevelfortheexternalequipment(videodecketc.)connectedtotheAUXinputtermi-
nal. Adjust so that the volume of the AUX input source sounds at an equivalent level to the CD.
1 Press the AUX key.
2 Select "INPUT
?".
Each press switches the display contents.
"TAPE RVS"
\
\
"INPUT
"TIMER
?"
?"
"TIME ADJUST ?"
"APS ?"
(Press the set/demo key while the "?" mark is
blinking.)
3 Adjust the input level.
The level
decreases
The level
increases
Input level
÷ Adjustment is possible from the range of 3 to + 2.
÷ Adjusting the input level control also varies the record-
ing level from the input source connected to the AUX
input jacks.
-
4 Set it.
EN
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock adjustment
As the clock is not only used to show the time of the day but also used in timer operations, be sure to set
the clock in advance.
Activate the Clock adjustment mode.
1
1 Select " TIME ADJUST ?"
\
\
÷ The time display starts to blink.
(Press the set/demo key while the "?" mark is
blinking.)
Adjust the hour.
2
1 Select the figure of hour.
Example: Adjustment to 8:07
To decrease
hour
To increase
hour
2 Set it.
÷ In other areas than the U.K. and Europe the clock
shows the time of the day in the 12-hour system.
÷ Press the set/demo key. The hour is entered and the
minute display starts to blink.
3Adjust the minute.
1 Select the figure of minute.
Example: Adjustment to 8:07
To decrease
minute
To increase
minute
2 Set it.
÷ If you make a mistake, restart from the beginning.
÷ When the time of day has been set by pressing the
set/demo key, the display shows "COMPLETE".
÷ After a power failure or the power cord has been un-
plugged, the time set will be erased. You have to set
the time again when unit is switched on.
÷ When the 7 key is pressed while the power is in the
standby mode, the time of the day will be displayed for
5 seconds.
EN
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer operation
Sleep timer (SLEEP)
The unit is turned OFF automatically after the specified period has elapsed.
Timer playback, timer recording (PROG 1, PROG 2)
·
Playback of the selected input source or recording of the TUNER or AUX input starts at the specified time.
AI timer playback (PROG 1, PROG 2)
·
When timer playback starts, the volume level increases gradually until the set volume level is reached.
Sleep timer (SLEEP)
Set the number of minutes after which the unit is to be turned OFF.
Connect the related equipment under reference to "System connection"
6~8
÷ The unit is turned OFF automatically after the set time
has elapsed.
Set the time.
÷ Each press increases the timer period by 10 minutes.
The sleep timer can be set up to 90 minutes.
SLEEP
10=20=30.....70=80=90=Cancel=10=20
.....
Sleep timer indicator lights
The system has been set up so that the display is
dimmed automatically while the sleep timer is acti-
vated.
Duration for sleep timer
÷ Press the SLEEP key while the sleep timer is activated
to check the remaining time.
To cancel
Turn the unit OFF or press the SLEEP key until the
sleep timer is canceled.
EN
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer operation
Setting the timer program(PROG. TIMER)
In each of PROG 1 and PROG 2, the timer data including the operating period and played contents can be
program and set to be activated or deactivated.
Adjust the clock before setting the timer
‡
Connect the related equipment under reference to "System connection"
6~8
1Make preparations for the play (recording).
To listen to CD
To listen to tape
For recording
Make preparations for record-
ing.
Insert a disc.
Insert a tape.
(Program playback is not possi-
ble.)
§
To listen to radio
Playing the auxiliary input source
The station should be preset pri-
Maketimersettingofthecompo-
nentconnectedtotheAUXinput
jacks.
or.
¡
÷ Two timer settings can be reserved independently in two programs PROG 1 and PROG 2.
÷ Please make reservations with an interval of at least one minute, so that the operation times of PROG 1 and PROG 2 do
not overlap.
2Set the timer setting program number.
1 Select "TIMER
Each press switches the display contents.
?".
"TAPE RVS"
"AUTO PRESET ?" or "AUTO MEMORY ?"
(Only when the TUNER input is selected)
"INPUT
(Only when the AUX input is selected)
"TIMER ?"
"TIME ADJUST ?"
"APS ?"
?"
\
\
(Press the set/demo key while the "?" mark is
blinking.)
Each press switches the display contents.
1 "PROG 1 ?"
2 Select "PROG 1 ?" or "PROG 2 ?".
2 "PROG 2 ?"
3 Set it.
÷ The previously set contents are displayed. (If you do not
want to change them, simply press the set/demo key.)
÷ When a timer setting has already been made in the
selected timer, the setting will be overwritten by the
new setting.
Continued on next page
EN
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer operation
3Select the program timer ON/OFF.
1 Select "ON ?" or "OFF ?"
÷ If OFF is selected, the key function return to ordinary
mode.
2 Set it.
4Select ONETIME or EVERYDAY execution of the programed timer.
1 Select "ONETIME" or "EVERYDAY"
÷ In the ONETIME mode, the timer is set OFF after
execution.
2 Set it.
÷ In the EVERYDAY mode, the timer is executed every-
day.
5Set the ON time then the OFF time.
1 Adjust the time.
The time is
returned
The time is
advanced
÷ In other areas than the U.K. and Europe the clock
shows the time of the day in the 12-hour system.
÷ For each of the ON time and OFF time, enter the figure
of "hour" by performing steps 1 and 2 then enter the
figure of "minute" in the same manner.
2 Set it.
÷ If you make a mistake, press the mode key and restart
from step 2.
EN
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer operation
Make the desired reservation.
6
For timer playback or AI timer playback
For timer recording
1 Select the mode.
1 Select the mode.
(1) Select "PLAY" or "AI PLAY".
(1) Select "REC".
1 "PLAY"
(Timer play)
2 "REC"
1 "PLAY"
2 "REC"
3 "AI PLAY"
3 "AI PLAY"
(Timer play with gradually increasing
volume)
(2) Set it.
(2) Set it.
2 Adjust the volume level
2 Adjust the volume level
÷ When "PLAY" is selected, the timer playback will
start at the set volume level.
÷ When "REC" is selected, the timer recording will
÷ When "AI PLAY" is selected, the timer playback will
start at the set volume level.
start at volume 0 and increase to the set volume level.
3 Select the input source.
3 Select the input source.
(1) Select the source to be played.
(1) Select what is to be recorded.
1 "TUNER"
(Broadcasts)
1 "TUNER"
(Broadcasts)
2 "CD"
2 "AUX"
(External input / video, etc.)
3 "TAPE"
4 "AUX"
(External input / video, etc.)
(2) Set it.
(2) Set it.
Continued on next page
Continued on next page
EN
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer operation
4 Select the broadcast station (only when
4 Select the broadcast station (only when
TUNER is selected above).
TUNER is selected above).
(1) Select the preset station No.
(1) Select the preset station No.
(2) Set it.
(2) Set it.
÷ When the timer setting is completed by pressing
÷ When the timer setting is completed by pressing
the set/demo key, "COMPLETE" is displayed.
the set/demo key, "COMPLETE" is displayed.
To check or modify the reservation contents, restart the timer reservation from the beginning.
7Put the unit in standby mode.
÷ When the unit enters the Standby mode, the standby/
timer indicator lights in green.
÷ If there is a power failure or the power cord is un-
plugged after the timer reservation has been activated,
the standby/timer indicator blinks in green. In this
case, the clock setting should be restarted from the
beginning.
or
EN
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Items
Maintenance
Cleaning the head section
Cleaning the heads and periph- Demagnetizing the head
eral components
When the recording / playback head is
magnetized, the sound quality will dete-
riorate. In such a case, demagnetize the
head using a commercially available de-
magnetizer (head eraser).
Cotton swab
Capstan
For maintaining the best condition of
the deck and for longer service life, al-
ways keep the heads, capstan and
pinch roller clean. To clean them, per-
form the following:
Head
Pinch roller
Tape guides
1. Open the cassette holder.
2. Using a cotton swab dipped in alco-
hol, clean the head, capstan and
pinch roller carefully.
¶ There are precisely aligned parts
around the heads, including the
tape guides. When cleaning, pay
special attention so as not to apply
shock to them.
Maintenance of the unit
In regard to contact cleaner
Do not use contact cleaners because it could cause
a malfunction. Be specially careful not to use con-
tact cleaners containing oil, for they may deform the
plastic component.
When the front panel or case becomes dirty, wipe with a
soft, dry cloth. Do not use thinner, benzine, alcohol, etc.
for these agents may cause discoloration.
Reference
Caution on condensation
Condensation (of dew) may occur inside the unit when
there is a great difference in temperature between this
unit and the outside.
This unit may not function properly if condensation oc-
curs. In this case, leave the unit for a few hours and re-
start the operation after the condensation has dried up.
Be specially cautious against condensation in a following
circumstances:
Memory backup function
Stored contents which are cleared immediately when
power plug is unplugged from power outlet :
Clock display
When this unit is carried from one place to another across
a large difference in temperature, when the humidity in
the room where this unit is installed increases, etc.
Note related to transportation and movement
Before transporting or moving this unit, carry out the
following operations.
Storedcontentswhichwillback-upafterpowerplugis
unplugged from power outlet:
1 Remove the CD from the unit.
2 Press the CD 6 key.
Preset station, Program Timer
3 Wait for some time and verify that the dis-
play appears as above.
4 Wait a few seconds and turn the unit OFF.
EN
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Items
Disc handling precautions
Never play a cracked or warped disc
During playback, the disc rotates at high speed in the
player. Therefore, to avoid danger, never use a cracked or
deformed disc or a disc repaired with tape or adhesive
agent. Please do not use discs which are not round be-
cause they may cause malfunction.
Handling
Hold the disc so that you do not touch the
playing surface.
Label side
Playing side
Discs which can be played with this unit
Sticker
CD (12 cm, 8 cm), CD-R, CD-RW, and the audio part of
CDV, CD-G, CD-EG and CD-EXTRA. Use discs that comply
Do not attach paper or tape to either the
playing side or the label side of the disc.
with the IEC standard, for example a disc carrying the
marking on the label surface.
Sticky paste
Disc accessories
Cleaning
If there are fingerprint marks or foreign
matter found on the disc, lightly wipe the
disc with a soft cotton cloth (or similar)
from the center of the disc outwards in a
radial manner.
The disc accessories (stabilizer, protection sheet, protec-
tion ring, etc.) which are marketed for improving the sound
quality or protecting discs as well as the disc cleaner
should not be used with this system because they may
cause malfunction.
Storage
When a disc is not to be played for a long period of time,
remove it from the player and store it in its case.
Notes on cassette tape
Safety tab (accidental erasure prevention tab)
After an important recording has finished, break the
safety tab, to prevent the recorded contents from being
erased or recorded on accidentally.
When there is slack in the tape
In such a case, insert a pencil into the reel hole and
wind the reel hub to remove the slack.
For A side
For B side
To re-record
¶ Do not use an endless tape, as this could damage
the mechanism of the unit.
Apply tape only to the position where the tab
has been removed.
Do not use a cassette with more than 90-minute
recording time, for the tape used in such a cas-
sette is very thin and tends to cause problem
such as entanglement around the pinch roller or
could be easily cut off.
To store cassette tapes
Do not store tapes in places which are subjected to di-
rect sunlight, or near equipment that generates heat.
Keep the cassette tapes away from any magnetic field.
WARNING NOTICE:
In most cases it is an infringement of copyright to make copies of tapes or discs without the permission
of the copyright owners. Anyone wishing to copy commercially available tapes or disc should contact
the mechanical copyright protection society limited or the performing rights society limited.
EN
44
Download from Www.Somanuals.com. All Manuals Search And Download.
In case of difficulty
What seems to be a malfunction is not always so. Before calling for service, check the following table
according to the symptom of your trouble.
Operation to reset
Unplugthepowercordfromthepoweroutlet, then
while holding the POWER or key depressed, plug
the power cord again.
The microcomputer may fall into malfunction (impossi-
bility to operate, erroneous display, etc.) when the
power cord is unplugged while unit is ON or due to an
external factor. In this case, execute the following pro-
cedure to reset the microcomputer and return it to nor-
mal condition.
or
÷ Please note that resetting the microcomputer
clears the contents stored in and it returns to condi-
tion when it left the factory.
After resetting the microcomputer, the display will show
as follow:
Amplifier section/Speakers
Symptom
Remedy
Sound is not produced.
÷ Connect properly referring to "System connections".
6
$
%
÷ Adjust to a required volume.
÷ Switch MUTE OFF.
÷ Unplug the headphone plug.
The"standby/timer"indicatorblinksinredand ÷ A speaker cord is short-circuited. Turn power off and re-connect
no sound is output.
the speaker cord.
÷ Adjust the present time again.
÷ Set the timer ON/OFF time properly
‡
‚
The "standby/timer" indicator blinks in green.
÷ Insert correctly.
÷ Adjust to a required volume.
%
$
No sound from the headphones.
÷ Connect properly referring to "System connections".
6
‡
Sound is not produced from the left or right
speakers.
÷ Adjust the present time again.
The clock display blinks without changing the
figures.
÷ Adjust the present time referring to "Clock adjustment". ‡
Timer operation is not possible.
÷ Set the timer ON time and OFF time.
‚
Tuner section
Symptom
Remedy
Radio stations cannot be received.
÷ Connect antennas.
78
)
÷ Select a band.
÷ Tune to the frequency of the desired station.
)
Noise interferes.
÷ Install the outdoor antenna in an apart position from the road.
÷ Switch the suspected electric appliance OFF.
÷ Install the TV or the system at an increased distance between
them.
A station has been preset but it cannot be re- ÷ Preset stations with tunable frequencies.
ceived by pressing the P.CALL key. ÷ Preset stations again.
¡
¡
EN
45
Download from Www.Somanuals.com. All Manuals Search And Download.
In case of difficulty
CD player section
Symptom
Remedy
A CD is placed in the player but it cannot be ÷ Place the disc properly, with the label side facing upward.
played.
÷ Clean the disc referring to "Disc handling precautions". r
÷ Refer to "Caution on condensation" and remove the condensation
by evaporation.
e
Sound is not produced.
Sound skips.
÷ Press the CD 6 key.
÷ Clean the disc referring to "Disc handling precautions". r
÷ Clean the disc referring to "Disc handling precautions". r
÷ Install the unit in a place not subject to vibrations.
Cassette deck section
Symptom
Remedy
Soundcannotbeproducedbypressingtheplay ÷ Clean the head referring to "Maintenance".
e
key.
÷ The tape is wound too tight due to irregular winding.
÷ Play a recorded tape.
No operation occurs even when an operation ÷ Press operation keys in more than a few seconds after closing
key is pressed. the cassette holder.
÷ Change the tape transport direction or reverse the tape insertion
*
orientation.
*
The cassette holder cannot be opened by ÷ Press in stop mode.
pressing ") push open".
Sound is harsh or high frequencies are not re- ÷ Clean the head referring to "Maintenance".
e
produced.
÷ Try another tape.
Sound is distorted.
÷ The recording level is not set properly (when the AUX input is
recorded).
Adjust the AUX input level.
fl
Noise is noticeable.
Sound vibrates.
÷ Demagnetize the head referring to "Maintenance".
e
÷ Install the system at a distance from other electric appliances and TV.
÷ Set the TAPE EQ. to on.
(
÷ Clean the head referring to "Maintenance".
e
÷ Wind the tape again by fast forwarding, rewinding or playing
from an end to the other.
*(
Recording cannot be started by pressing the ÷ Use a cassette with an unbroken recording protect tab or block
record key.
the hole.
r
*
¶
÷ Close the holder completely.
÷ Set the input selector to the source to be recorded.
÷ Change the tape transport direction or reverse the tape insertion
orientation.
*
Remote control unit
Symptom
Remedy
Remote control operation is not possible.
÷ Replace with new batteries.
÷ Operate the unit inside the remote controllable range.
#
#
EN
46
Download from Www.Somanuals.com. All Manuals Search And Download.
In caseofdifficulty
Displayed messages and actions to be taken against them
Displayed Message
Meaning
÷ An attempt is made to select a 33rd track during programing of CD.
PGM FULL
PGM MODE
÷ An attempt is made to start random playback in the program mode. Exit from the
program mode before random playback.
º
PROTECT
÷ The cassette in use is protected by breaking the erasure protection tab.
r
RDM MODE
÷ An attempt is made to perform O.T.E. recording while the unit is in the CD random
play mode. Exit from the random play mode.
¤
For the U.S.A.
Note to CATV system installer
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that
providesguidelinesforpropergroundingand, inparticular, specifiesthatthecablegroundshallbecon-
nected to the grounding system of the building, as close to the point of cable entry as practical.
EN
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Main unit
[Amplifier section]
[Cassette deck section]
(For U.S.A. and Canada)
Track
................................ 4-track, 2-channel stereo
Rated output power during STEREO operation (FTC)
Recording system ................................ AC bias system
(Frequency: 105 kHz)
Heads
43 watts per channel minimum RMS, both chan-
nels driven, at 6 Ω from 90 Hz to 15 kHz with no
more than 10 % total harmonic distortion.
Playback/ recording head ....................................... 1
Erasing head............................................................. 1
Wow and flutter ................................ 0.2 % (W.R.M.S.)
Fast winding time ....................... Approx. 100 seconds
(C-60 tape)
(For U.K. and Europe)
Effective output power during STEREO operation
(1 kHz, 10% T.H.D., at 6 Ω) ................. 50 W + 50 W
Rated output power during STEREO operation
(1 kHz, 0.7% T.H.D., at 6 Ω) ................ 37 W + 37 W
[General]
Power consumption ............................................ 120 W
Dimensions ............................... W : 180 mm (7-1/16”)
H : 255 mm (8-7/16”)
D : 335 mm (13-3/16”)
Weight (net)........................................... 5.3 kg (11.7 lb)
(For other countries)
Rated output power during STEREO operation
(1 kHz, 10% T.H.D., at 6 Ω) ................. 50 W + 50 W
Frequency response
AUX ............................ 30 Hz~100 kHz (0 dB ~ -3dB)
[Tuner section]
FM tuner section
Tuning frequency range ......... 87.5 MHz ~ 108 MHz
Speakers
MW (AM) tuner section
Enclosure ............................................ Bass-reflex type
Speaker configuration
(For U.S.A. and Canada)
Tuning frequency range .......... 530 kHz ~ 1,700 kHz
Woofer ...................................... 120 mm, cone type
Tweeter..................................... 25 mm, dome type
Impedance ................................................................ 6 Ω
Maximum input level ............................................ 50 W
Dimensions ............................... W : 150 mm (5-7/8”)
H : 255 mm (10-1/16”)
(For U.K. and Europe)
Tuning frequency range .......... 531 kHz ~ 1,602 kHz
(For Australia)
Tuning frequency range .......... 531 kHz ~ 1,602 kHz
(For other countries)
D : 213 mm (8-3/8”)
Weight (net) ............................... 2.3 kg (5.5 lb) (1 piece)
Tuning frequency range
9 kHz step ............................ 531 kHz ~ 1,602 kHz
10 kHz step .......................... 530 kHz ~ 1,610 kHz
[CD player section]
KENWOOD follows a policy of continuous ad-
vancements in development. For this reason
specifications may be changed without notice.
÷ Sufficient performance may not be exhibited
at extremely cold locations (where water
freezes).
Laser
....................................... Semiconductor laser
Over sampling ......................................... 8 fs (352.8 Hz)
Laser wave length .................................... 760 - 800 nm
Laser power class ...................................... Class 1 (IEC)
D/A Conversion....................................................... 1 Bit
For your records
Record the serial number, found on the back of the unit, in
the spaces designated on the warranty card, and in the
space provided below. Refer to the model and serial
numbers whenever you call upon your dealer for informa-
tion or service on this product.
Model
Serial Number
EN
48
Download from Www.Somanuals.com. All Manuals Search And Download.
|