JVC DVD Player LVT2008 029A User Manual

DV300H-JN.BUSAJJ2_ENG_MFL62178452  
DVD PLAYER  
XV-N680B  
XV-N682S  
LVT2008-029A  
[UJ]  
INSTRUCTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION:  
The STANDBY/ON button does not completely  
shut off mains power from the unit, but switches  
operating current on and off.  
When moving the product, press STANDBY/ON to  
turn off the power, and wait at least 30 seconds  
before unplugging the power cord. Then, wait at  
least 2 minutes before moving the product.  
When discarding batteries, environmental  
problems must be considered and the local rules  
or laws governing the disposal of these batteries  
must be followed strictly.  
CAUTION  
• Do not block the ventilation openings or holes.  
(If the ventilation openings or holes are blocked by  
a newspaper or cloth, etc., the heat may not be  
able to get out.)  
• Do not place any naked flame sources, such as  
lighted candles, on the apparatus.  
• When discarding batteries, environmental  
problems must be considered and local rules or  
laws governing the disposal of these batteries  
must be followed strictly.  
• Do not expose this apparatus to rain, moisture,  
dripping or splashing and that no objects filled with  
liquids, such as vases, shall be placed on the  
apparatus.  
• Battery shall not be exposed to excessive heat  
such as sunshine, fire or the like.  
®
As an E  
S
Partner, JVC  
NERGY TAR  
has determined that this product or  
product models meet the E  
NERGY  
®
S
guidelines for energy  
TAR  
efficiency.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Introduction . . . . . . . . . . . . . . . . . .5-8  
Operation . . . . . . . . . . . . . . .16-21  
General Features . . . . . . . . . . . . . . . . . . . . . .16  
Additional Features . . . . . . . . . . . . . . . . . . . .17  
Playing an Audio CD or MP3/WMA file . . . . .18  
Programmed Playback . . . . . . . . . . . . . . . . .19  
Repeat Programmed Tracks . . . . . . . . . . . .19  
Erasing a Track from Program List . . . . . . .19  
Erasing the Complete Program List . . . . . .19  
Viewing a JPEG file . . . . . . . . . . . . . . . . . . . .20  
Slide Show . . . . . . . . . . . . . . . . . . . . . . . . .20  
Still Picture . . . . . . . . . . . . . . . . . . . . . . . . .20  
Moving to another file . . . . . . . . . . . . . . . . .20  
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
Rotating the picture . . . . . . . . . . . . . . . . . .20  
About the  
Symbol Display . . . . . . . . . . . . .5  
Symbol Used in this Manual . . . . . . . . . . . . . .5  
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .5  
Handling Discs . . . . . . . . . . . . . . . . . . . . . . .5  
Storing Discs . . . . . . . . . . . . . . . . . . . . . . . .5  
Cleaning Discs . . . . . . . . . . . . . . . . . . . . . . .5  
Types of Playable Discs . . . . . . . . . . . . . . . . .6  
Regional Code . . . . . . . . . . . . . . . . . . . . . . . . .6  
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .8  
Remote Control operation . . . . . . . . . . . . . .8  
Remote Control Battery installation . . . . . . . .8  
Listening to MP3/WMA music  
while watching picture . . . . . . . . . . . . . . . .20  
Installation and Setup . . . . . . . . .9-15  
Playing a MPEG4 Movie file . . . . . . . . . . . . .21  
Playing a DVD VR format Disc . . . . . . . . . . .22  
Setting up the Player . . . . . . . . . . . . . . . . . . . .9  
DVD Player Connections . . . . . . . . . . . . . .9-10  
Video and Audio Connections to Your TV . . .9  
Resolution setting . . . . . . . . . . . . . . . . . . . . .9  
HDMI connection . . . . . . . . . . . . . . . . . . . .10  
Audio Connection to Optional Equipment . .11  
When you turn on for the first time . . . . . . . .12  
Displaying Disc Information on-screen . . . .12  
Initial Settings . . . . . . . . . . . . . . . . . . . . . .12-14  
General Operation . . . . . . . . . . . . . . . . . . .12  
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . .13  
• Menu Language . . . . . . . . . . . . . . . . . .13  
• Disc Audio / Subtitle / Menu . . . . . . . . .13  
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . .13  
• TV Aspect . . . . . . . . . . . . . . . . . . . . . .13  
• Display Mode . . . . . . . . . . . . . . . . . . . .13  
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
• Dolby Digital / DTS / MPEG . . . . . . . . .14  
• Sample Freq. (Frequency) . . . . . . . . .14  
• DRC (Dynamic Range Control) . . . . . .14  
• Vocal . . . . . . . . . . . . . . . . . . . . . . . . . .14  
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . .15  
• PBC . . . . . . . . . . . . . . . . . . . . . . . . . .15  
• B.L.E. (Black Level Expansion) . . . . . .15  
Reference . . . . . . . . . . . . . . . . . .23-26  
Remote Control Function . . . . . . . . . . . . . . . . . . .23  
Maintenance and Service . . . . . . . . . . . . . . . .24  
Language Codes . . . . . . . . . . . . . . . . . . . . . . .25  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . .25  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . .26  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
To ensure proper use of this product, please read this  
owner’s manual carefully and retain it for future  
reference.  
Notes on Discs  
Handling Discs  
This manual provides information on the operation  
and maintenance of your DVD player. Should the unit  
require service, contact an authorized service location.  
Do not touch the playback side of the disc. Hold the  
disc by the edges so that fingerprints do not get on  
the surface. Never stick paper or tape on the disc.  
About the Symbol Display  
” may appear on your TV display during  
operation and indicates that the function explained in  
this owner’s manual is not available on that specific  
DVD video disc.  
Storing Discs  
After playing, store the disc in its case. Do not expose  
the disc to direct sunlight or sources of heat and never  
leave it in a parked car exposed to direct sunlight.  
Symbol Used in this Manual  
Note:  
Cleaning Discs  
Indicates special notes and operating features.  
Fingerprints and dust on the disc can cause poor  
picture quality and sound distortion. Before playing,  
clean the disc with a clean cloth. Wipe the disc from  
the center out.  
Tip:  
Indicates tips and hints for making the task easier.  
A section whose title has one of the following symbols is  
applicable only to the disc represented by the symbol.  
ALL  
All discs and file listed below  
DVD  
DVD and finalized DVD R/RW  
VCD  
Video CDs  
ACD  
Audio CDs  
MP3  
Do not use strong solvents such as alcohol, benzine,  
thinner, commercially available cleaners, or anti-static  
spray intended for older vinyl records.  
MP3 files  
WMA  
WMA files  
MPEG4  
MPEG4 files  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Types of Playable Discs  
Regional Code  
DVD  
This unit has a regional code printed on the rear of the  
unit. This unit can play only DVD discs labeled as the  
same as the rear of the unit or “ALL”.  
(8 cm / 12 cm disc)  
Video CD (VCD/SVCD)  
(8 cm / 12 cm disc)  
Notes on Regional Codes  
Audio CD  
(8 cm / 12 cm disc)  
• Most DVD discs have a globe with one or more  
numbers in it clearly visible on the cover. This  
number must match your unit’s regional code or the  
disc cannot play.  
In addition, this unit plays DVD R/RW and CD-R/RW,  
Dual disc that contains audio titles, MPEG4, MP3,  
WMA, and/or JPEG files.  
• If you try to play a DVD with a different regional  
code from your player, the message “Check  
Regional Code” appears on the TV screen.  
This indicates a product feature that is  
capable of playing DVD-RW discs  
recorded with Video Recording format.  
Notes on Copyrights:  
It is forbidden by law to copy, broadcast, show,  
broadcast via cable, play in public, or rent copyrighted  
material without permission. This product features the  
copy protection function developed by Macrovision.  
Copy protection signals are recorded on some discs.  
When recording and playing the pictures of these  
discs picture noise will appear. This product  
incorporates copyright protection technology that is  
protected by method claims of certain U.S. patents  
and other intellectual property rights owned by  
Macrovision Corporation and other rights owners.  
The Use of this copyright protection technology must  
be authorized by Macrovision Corporation, and is  
intended for home and other limited viewing uses only  
unless otherwise authorized by Macrovision  
Corporation. Reverse engineering or disassembly is  
prohibited.  
Notes:  
• Depending on the conditions of the recording  
equipment or the CD-R/RW (or DVD R/RW) disc  
itself, some CD-R/RW (or DVD R/RW) discs  
may not be played on the unit.  
• Do not use irregularly shaped CDs (e.g., heart-  
shaped or octagonal) since they may result in  
malfunctions.  
• This DVD player requires discs and recordings to  
meet certain technical standards in order to achieve  
optimal playback quality. Pre-recorded DVDs are  
automatically set to these standards. There are  
many different types of recordable disc formats  
(including CD-R containing MP3 or WMA files) and  
these require certain pre-existing conditions (see  
above) to ensure compatible playback.  
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH  
DEFINITION TELEVISION SETS ARE FULLY  
COMPATIBLE WITH THIS PRODUCT AND MAY  
CAUSE ARTIFACTS TO BE DISPLAYED IN THE  
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN  
PICTURE PROBLEMS, IT IS RECOMMENDED THAT  
THE USER SWITCH THE CONNECTION TO THE  
‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE  
QUESTIONS REGARDING OUR TV SET  
Customers should note that permission is  
required in order to download MP3 / WMA files  
and music from the Internet. Our company has  
no right to grant such permission. Permission  
should always be sought from the copyright  
owner.  
COMPATIBILITY WITH THIS MODEL 525p DVD  
PLAYER, PLEASE CONTACT OUR CUSTOMER  
SERVICE CENTER.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel  
a
b
c
d
e
f
g
h
i
a 1/' STANDBY/ON  
f N (PLAY)  
Switches the unit ON and OFF.  
Starts playback.  
b Disc Tray  
g x (STOP)  
Insert a disc here.  
Stops playback.  
h . (SKIP)  
c Z (OPEN/CLOSE)  
Opens or closes the disc tray.  
Returns to the beginning of current chapter or  
track or go to the previous chapter or track.  
Press and hold the button for search backward.  
d Display window  
Shows the current status of the unit.  
i > (SKIP)  
e Remote Sensor  
Go to the next chapter or track.  
Press and hold the button for search forward.  
Point the remote control here.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
DISPLAY  
STANDBY/ON (1/')  
Accesses On-Screen Display.  
Switches DVD Player ON and OFF.  
DVD MENU  
Accesses menu on a DVD disc.  
OPEN/CLOSE (Z)  
Opens and closes the disc tray.  
b / B / v / V (left/right/up/down)  
Selects an item in the menu.  
ENTER (  
Confirms menu selection.  
)
PAUSE/STEP ( X )  
Pauses playback temporarily/ press  
repeatedly for frame-by-frame  
playback.  
SETUP  
Accesses or removes Setup menu.  
SKIP (. / >)  
Go to next chapter or track.  
Returns to the beginning of current  
chapter or track or go to the  
previous chapter or track.  
RETURN (O)  
Displays the menu of a video CD  
with PBC.  
STOP (x)  
Stops playback.  
AUDIO (  
Selects an audio language or an  
)
SCAN (m / M)  
Search backward or forward.  
audio channel.  
PLAY (N)  
Starts playback.  
SUBTITLE (  
)
Selects a subtitle language.  
0-9 numerical buttons  
Selects numbered items in a menu.  
ANGLE (  
Selects a DVD camera angle,  
if available.  
)
PROGRAM  
Enter to program edit mode.  
CLEAR  
Removes a track number on the  
Program List or a mark on the  
Marker Search menu.  
ZOOM  
Enlarges video image.  
MARKER  
Marks any point during playback.  
SEARCH  
Displays MARKER SEARCH menu.  
TITLE  
Displays title menu, if available.  
RESOLUTION  
You can change the resolution  
depending on your TV.  
Remote Control operation  
Point the remote control at  
the remote sensor and press  
the buttons.  
Remote Control Battery  
installation  
Detach the battery  
REPEAT  
Repeats chapter, track, title or all.  
cover on the rear  
of the remote  
control, and insert  
two batteries (size  
AAA) with 3 and  
# aligned  
RANDOM  
Plays tracks in random order.  
Cautions:  
A-B  
• Do not mix old and new  
batteries and never mix  
different types of batteries  
such as standard, alkaline,  
etc.  
Repeats sequence from point A to  
point B.  
correctly.  
• Do not put the batteries in  
the place where young  
children can reach.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and Setup  
Progressive Scan  
Setting up the Player  
• If your television is a high-definition or “digital  
ready” television, you may take advantage of  
the DVD player’s progressive scan output for  
the highest possible video resolution.  
• Progressive scan does not work with the  
analog video connections (yellow VIDEO  
OUTPUT jack and S-VIDEO OUTPUT jack).  
• The 1080p, 720p and 480p resolutions are the  
progressive scan applied resolution.  
The picture and sound of a nearby TV, VCR, or radio  
may be distorted during playback. If this occurs,  
position the player away from the TV, VCR, or radio,  
or turn off the unit after removing the disc.  
DVD Player Connections  
Depending on your TV and other equipment there are  
various ways you can connect the player. Please refer  
to the manuals of your TV, stereo system or other  
devices as necessary for additional connection  
Resolution setting  
information.  
1. Press RESOLUTION once. The current resolution  
setting will be appears in the display window.  
2. Press RESOLUTION repeatedly to change the  
resolution you want.  
Rear of TV  
The available resolution according to the connections  
are as shown below.  
Available Resolution  
OUTPUT CONNECTION  
1920 x 1080p  
1920 x 1080i  
1280 x 720p  
720 x 480p  
720 x 480i  
HDMI  
VIDEO OUTPUT  
1920 x 1080p  
1920 x 1080i  
1280 x 720p  
720 x 480p  
720 x 480i  
COMPONENT  
VIDEO OUTPUT  
Rear of  
DVD Player  
720 x 480i  
720 x 480i  
VIDEO OUTPUT  
S-VIDEO OUTPUT  
Video and Audio Connections  
to Your TV  
Make sure the DVD player is connected directly to the  
TV and not to a VCR, otherwise the DVD image could  
be distorted by the copy protection system.  
S-Video – Connect the S-VIDEO OUTPUT jack on  
the DVD Player to the S-Video in jack on the TV  
using the S-Video cable (S).  
Notes:  
• VIDEO OUTPUT and S-VIDEO OUTPUT is always  
at 480i standard resolution.  
• If your TV does not accept your resolution setting,  
abnormal picture appears on the screen.  
Please read TV’s owner’s manual then set the  
resolution that your TV can accept.  
Video – Connect the VIDEO OUTPUT jack on the  
DVD player to the video in jack on the TV using  
the video cable (V).  
Audio – Connect the left and right AUDIO OUTPUT  
jacks of the DVD Player to the audio left and right IN  
jacks on the TV using the audio cables (A).  
Do not connect the DVD Player’s AUDIO OUTPUT  
jack to the phone in jack (record deck) of your  
audio system.  
• For 720p, 1080i and 1080p resolution on the  
component video out, only non-copy protected  
discs can be played back. If the disc is copy  
protected, it will be displayed at the 480p resolution  
without HDMI cable connection. With HDMI cable  
connection, the picture may not be displayed  
properly.  
Component Video – Connect the COMPONENT /  
PROGRESSIVE SCAN OUTPUT jacks on the DVD  
Player to the corresponding jacks on the TV using  
an Y PB PR cable (C).  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
HDMI connection  
If you have an HDMI TV or a monitor, you can  
connect it to this player using an HDMI cable.  
HDMI compatible TV  
1. Set the TV’s source to HDMI (refer to TV Owner’s  
manual).  
2. Connect the HDMI OUTPUT jack on the unit to the  
HDMI jack on a HDMI compatible TV or  
monitor (H).  
3. Press RESOLUTION repeatedly to select the  
desired resolution.  
Notes:  
• Both PCM and Bitstream Audio out is available  
when the sample frequency is set to 48kHz in HDMI  
connection.  
Rear of DVD player  
About HDMI  
• If Audio setup is set to bitstream and your TV does  
not support Bitstream Audio out in HDMI  
connection, audio sound may not be outputted or  
distorted.  
HDMI (High Definition Multimedia Interface) supports  
both video and audio on a single digital connection for  
use with DVD Players, Set-Top Boxes, and other AV  
devices.  
HDMI was developed to provide the technologies of  
HDCP (High-bandwidth Digital Content Protection).  
HDCP is used to protect digital content transmitted  
and received.  
• When the no sound or noisy sound are outputted  
with HDMI connection, set the Audio option [Dolby  
Digital, DTS or MPEG] in SETUP menu to PCM or  
Off.  
• The arrow on the cable connector body should face  
up for correct alignment with the connector on the  
player.  
HDMI has the capability to support standard,  
enhanced or high-definition video plus standard to  
multi-channel surround-sound audio, HDMI features  
include uncompressed digital video, a bandwidth of up  
to 5 gigabytes per second, one connector (instead of  
several cables and connectors), and communication  
between the AV source and AV devices such as  
DTVs.  
• If there is noise or lines on the screen, please  
check the HDMI cable.  
HDMI, the HDMI logo and High-Definition Multimedia  
Interface are trademarks or registered trademarks of  
HDMI licensing LLC.  
• Not all HDCP-compatible DVI devices will work with  
this unit.  
• If your HDMI TV does not support HDCP,  
the blue screen appears on the screen.  
• If the abnormal picture appears on the TV screen,  
turn off the unit and then turn the unit on again.  
Tip:  
When you use HDMI connection, you can change the  
resolution (480i, 480p, 720p, 1080i, 1080p) for the  
HDMI output.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Amplifier equipped with 2-channel analog stereo  
or Dolby Pro Logic ll / Pro Logic: Connect the left  
and right AUDIO OUTPUT jacks on the DVD player to  
the audio left and right IN jacks on your amplifier,  
receiver, or stereo system, using the audio cables (A).  
Audio Connection to Optional  
Equipment  
Connect the DVD player to your optional equipment  
for audio output.  
Rear of DVD Player  
Amplifier equipped with 2-channel digital stereo  
(PCM) or audio / video receiver equipped with a  
multi-channel decoder (Dolby Digital™, MPEG 2,  
or DTS): Connect one of the DVD Player’s DIGITAL  
AUDIO OUTPUT jacks (OPTICAL O or COAXIAL X)  
to the corresponding jack on your amplifier. Use an  
optional digital (OPTICAL O or COAXIAL X) audio  
cable.  
Digital Multi-channel sound  
A digital multi-channel connection provides the best  
sound quality. For this you need a multi-channel audio  
/ video receiver that supports one or more of the  
audio formats supported by your DVD player such as  
MPEG 2, Dolby Digital and DTS. Check the receiver  
manual and the logos on the front of the receiver.  
Notes:  
If the audio format of the digital output does not  
match the capabilities of your receiver, the receiver  
produces a strong, distorted sound or no sound at  
all.  
Amplifier (Receiver)  
Manufactured under license from Dolby  
Laboratories. “Dolby”, “Pro Logic” and the  
double-D symbol are trademarks of Dolby  
Laboratories.  
• Six Channel Digital Surround Sound via a digital  
connection can only be obtained if your receiver is  
equipped with a Digital Multi-channel decoder.  
Manufactured under license under U.S. Patent  
#: 5,451,942 & other U.S. and worldwide patents  
issued & pending. DTS and DTS Digital Out are  
registered trademarks and the DTS logos and  
Symbol are trademarks of DTS, Inc.  
©1996-2007 DTS, Inc. All Rights Reserved.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When you turn on for the first  
time  
The menu for a language selection will appear when  
you turn on the unit for the first time. You must select  
a language to use the unit. Use b / B / v / V to select  
a language then press ENTER and the confirm menu  
will appear. Use b / B to select [Enter] then press  
ENTER.  
Initial Settings  
By using the Setup menu, you can make various  
adjustments to items such as picture and sound.  
You can also set a language for the subtitles and the  
Setup menu, among other things. For details on each  
Setup menu item, see pages 13 to 15.  
To display and exit the Menu:  
Press SETUP to display the menu. A second press of  
SETUP will take you back to initial screen.  
Displaying Disc Information  
on-screen  
You can display various information about the disc  
loaded on-screen.  
To go to the next level:  
Press B on the remote control.  
To go back to the previous level:  
Press b on the remote control.  
1. Press DISPLAY to show various playback  
information.  
The displayed items differ depending on the disc  
type or playing status.  
General Operation  
1. Press SETUP.  
The Setup menu appears.  
2. You can select an item by pressing v / V and  
change or select the setting by pressing b / B.  
2. Use v / V to select the desired option then press  
B to move to the second level. The screen shows  
the current setting for the selected item, as well as  
alternate setting(s).  
• Title (Track) – Current title (or track).  
number/total number of titles (or tracks).  
• Chapter – Current chapter number/total number  
of chapters.  
3. Use v / V to select the second desired option and  
then press B to move to the third level.  
• Time – Elapsed playing time.  
4. Use v / V to select the desired setting then press  
ENTER to confirm your selection.  
• Audio – Selected audio language or channel.  
• Subtitle – Selected subtitle.  
Some items require additional steps.  
• Angle – Selected angle/total number of angles.  
5. Press SETUP or PLAY (N) to exit the Setup  
menu.  
Note:  
If any button is not pressed for a few seconds, the on-  
screen display disappears.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISPLAY  
LANGUAGE  
TV Aspect  
Menu Language  
4:3 – Select when a standard 4:3 TV is connected.  
Select a language for the Setup menu and the  
on-screen display.  
16:9 – Select when a 16:9 wide TV is connected.  
Disc Audio / Subtitle / Menu  
Display Mode  
Select the language you prefer for the audio track  
(disc audio), subtitles, and the disc menu.  
The Display Mode setting works only when the TV  
Aspect mode is set to 4:3.  
Original – Refers to the original language in which  
the disc was recorded.  
Letterbox – Displays a wide picture with bands on  
the upper and lower portions of the screen.  
Other – To select another language, press  
numeric buttons and then ENTER to enter the  
corresponding 4-digit number according to the  
language code list on the page 24. If you enter the  
wrong language code, press CLEAR.  
Panscan – Automatically displays the wide picture  
on the entire screen and cuts off the portions that  
do not fit.  
Off (for Disc Subtitle) – Turn off Subtitle.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sample Freq. (Frequency)  
AUDIO  
If your receiver or amplifier is NOT capable of  
handling 96 kHz signals, select 48 kHz. When this  
choice is made, this unit automatically converts any  
96 kHz signals to 48 kHz so your system can decode  
them.  
Each DVD disc has a variety of audio output options.  
Set the player’s AUDIO options according to the type  
of audio system you use.  
If your receiver or amplifier is capable of handling 96  
kHz signals, select 96 kHz.  
Check the documentation for your amplifier to verify  
its capabilities.  
DRC (Dynamic Range Control)  
With the DVD format, you can hear a program’s  
soundtrack in the most accurate and realistic  
presentation. However, you may wish to compress the  
dynamic range of the audio output (the difference  
between the loudest sounds and the quietest ones).  
This allows you to listen to a movie at a lower volume  
without losing clarity of sound.  
Dolby Digital / DTS / MPEG  
Bitstream – Select “Bitstream” if you connect this  
unit’s DIGITAL AUDIO OUTPUT jack to an  
amplifier or other equipment with a Dolby Digital,  
DTS or MPEG decoder.  
Set DRC to On for this effect.  
Vocal  
PCM (for Dolby Digital / MPEG) – Select when  
connected to a two-channel digital stereo amplifier.  
DVDs encoded in Dolby Digital, MPEG will be  
automatically downmixed to two-channel PCM  
audio.  
Set to On only when a multi-channel karaoke DVD is  
playing. The karaoke channels on the disc mix into  
normal stereo sound.  
Off (for DTS) – If you select “Off”, the DTS signal  
is not output through the DIGITAL AUDIO  
OUTPUT jack.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHERS  
PBC  
Set Playback Control (PBC) to On or Off.  
On: Video CDs with PBC are played according to  
the PBC.  
Off: Video CDs with PBC are played in the same  
way as Audio CDs.  
B.L.E. (Black Level Expansion)  
To select the black level of playback pictures.  
Set your preference and monitor’s ability.  
On: Expanded grey scale. (0 IRE cut off)  
Off: Standard grey scale. (7.5 IRE cut off)  
Note:  
The B.L.E. function works NTSC system only.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
General Features  
Discs  
Buttons  
Operations  
ALL  
OPEN/CLOSE (Z)  
PAUSE/STEP (X)  
Opens or closes the disc tray.  
During playback, press PAUSE/STEP (X) to pause  
ALL  
playback.  
Press PAUSE/STEP (X) repeatedly to play Frame-by-  
Frame.  
DVD  
VCD  
MPEG4  
SKIP (. / >)  
SCAN (m / M)  
During playback, press SKIP (. or >) to go to the  
next chapter/track or to return to the beginning of the  
current chapter/track.  
DVD  
MP3  
VCD  
MPEG4  
ACD  
WMA  
Press SKIP (.) twice briefly to step back to the  
previous chapter/track.  
During playback, press SCAN (m or M) repeatedly to  
select the required scan speed.  
DVD, MPEG4 disc : 4 steps  
DVD  
MP3  
VCD  
MPEG4  
ACD  
WMA  
Video CD, MP3/WMA, Audio CD : 3 steps  
While the playback is paused, press SCAN (m or M  
repeatedly to play in slow motion.  
DVD : 4 steps  
)
DVD  
VCD  
MPEG4  
Video CD, MPEG4 : 4 steps (Forward only)  
REPEAT  
During playback, press REPEAT repeatedly to select a  
desired repeat mode.  
DVD : Chapter/Title/Off  
DVD  
MP3  
VCD  
MPEG4  
ACD  
WMA  
Video CD, Audio CD, MPEG4, MP3/WMA discs : Track/All/Off  
A-B  
Press the A-B button one at a time to select a point A and  
point B and repeats a sequence from point A (Starting  
point) to point B (End point).  
DVD  
VCD  
VCD  
ACD  
MPEG4  
ZOOM  
During playback or pause mode, press ZOOM to enlarge  
the video image (3 steps).  
DVD  
MPEG4  
You can move through the zoomed picture using  
b / B / v / V buttons. Press CLEAR to exit.  
RANDOM  
TITLE  
During playback or in stop mode, press RANDOM for  
random playback.  
ACD  
DVD  
MP3  
WMA  
If the current DVD title has a menu, the title menu appears  
on the screen. Otherwise, the disc menu may appears.  
DVD  
DVD  
DVD MENU  
The disc menu appears on the screen.  
ANGLE (  
)
During playback of DVD disc that contains scenes  
recorded at different camera angles, press ANGLE (  
repeatedly to select a desired angle.  
)
DVD  
DVD  
MPEG4  
MPEG4  
SUBTITLE (  
AUDIO (  
)
During playback, press SUBTITLE (  
select a desired subtitle language.  
) repeatedly to  
VCD  
)
During playback, press AUDIO (  
) repeatedly to hear  
a different audio language, audio channel or encoding  
method.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD  
VCD 1.1  
ACD  
Notes on general features:  
Last Scene Memory  
• On a Video CD with PBC, you must set PBC to Off  
on the setup menu to use the repeat function (See  
“PBC” on page 15).  
This player memorizes last scene from the last disc  
that is viewed. The last scene remains in memory  
even if you remove the disc from the player or switch  
off the player. If you load a disc that has the scene  
memorized, the scene is automatically recalled.  
• If you press SKIP (>) once during Repeat Chapter  
(Track) playback, the repeat playback cancels.  
• Zoom may not work on some DVDs.  
Note:  
• When you are playing a DVD disc that contains  
scenes recorded at different camera angles, the  
angle indicator will be displayed on the TV screen  
during the operations as an indication that angle  
switching is possible.  
This player does not memorize the scene of a disc if  
you switch off the player before commencing to play  
the disc.  
Screen Saver / Auto Power Off  
The screen saver appears when you leave the DVD  
player in Stop mode for about five minutes. If the  
Screen Saver is displayed for five minutes, the DVD  
Player automatically turns itself off.  
Additional Features  
DVD  
VCD  
MPEG4  
Time Search  
To start playing at any chosen time on the disc:  
1. Press DISPLAY during playback.  
2. Press v / V to select the time clock icon and  
“-:--:--” appears.  
3. Input the required start time in hours, minutes, and  
seconds from left to right. If you enter the wrong  
numbers, press CLEAR to remove the numbers  
you entered. Then input the correct numbers.  
4. Press ENTER to confirm.  
Playback starts from the selected time.  
DVD  
VCD  
MPEG4  
Marker Search  
To enter a Marker  
You can start playback from up to nine memorized  
points. To enter a marker, press MARKER at the  
desired point on the disc. The Marker icon appears on  
the TV screen briefly. Repeat to enter up to nine  
markers.  
To Recall or Clear a Marked Scene  
1. During disc playback, press SEARCH. The marker  
search menu appears on the screen.  
2. Within 9 seconds, press b / B to select a marker  
number that you want to recall or clear.  
3. Press ENTER and playback starts from the marked  
scene. Or, Press CLEAR and the marker number is  
erased from the list.  
4. You can play any marker by inputting its number on  
the marker search menu.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ID3 TAG  
Playing an Audio CD or  
MP3/WMA file  
When playing a file containing information such as  
track titles, you can see the information by pressing  
DISPLAY. [ Title, Artist, Album, Year, Comment ]  
This unit can play Audio CDs or MP3/WMA files.  
Tips:  
• If you are in a file list and want to return to the  
previous Folder list, use v / V buttons to highlight  
MP3/ WMA/ Audio CD  
Once you insert an MP3/WMA files recorded media or  
Audio CD, a menu appears on the TV screen.  
Use v / V to select a track/file and then press  
PLAY (N) or ENTER and playback starts.  
You can use variable playback functions.  
Refer to page 16-17.  
and press ENTER.  
• Press DVD MENU to move to the next page.  
• On a DISC with MP3/WMA, JPEG and MOVIE file,  
you can switch MUSIC, PHOTO and MOVIE menu.  
Press TITLE, and MUSIC, PHOTO or MOVIE word  
on top of the menu is highlighted.  
MP3 / WMA disc compatibility with this player is  
limited as follows:  
• Sampling frequency: within 8 - 48 kHz (MP3),  
within 22 - 48kHz (WMA)  
• Bit rate: within 8 - 320kbps (MP3),  
32 - 256 kbps (WMA)  
• The player cannot read an MP3/WMA file that has  
a file extension as non than “.mp3” / “.wma”.  
• CD-R/RW, DVD R/RW Format: ISO 9660  
• File names should have a maximum of 8 letters  
and must incorporate an .mp3 or .wma extension.  
• They should not contain special letters such as / ?  
* : “ < > l etc.  
• The total number of files in a folder should be less  
than 650 files.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeat Programmed Tracks  
Programmed Playback  
The program function enables you to store your  
favorite tracks from any disc in the player memory.  
A program can contain 30 tracks.  
Press REPEAT to select a desired repeat mode.  
• TRACK: Repeats the current track.  
• ALL: Repeats all the tracks on programmed list.  
• Off (No display): Does not play repeatedly.  
1. Insert an Audio CD or MP3/WMA files recorded  
media. AUDIO CD or MUSIC menu appears.  
Note:  
If you press SKIP (>) once during Repeat Track  
E
2. Press PROGRAM and the  
mark will appear.  
playback, the repeat playback cancels.  
Note:  
Press PROGRAM again to exit the program edit  
E
mode, then the  
mark will disappear.  
Erasing a Track from Program List  
3. Select a track on the “List” and then press ENTER  
to place the selected track on the “Program” list.  
Repeat to place additional tracks on the list.  
E
1. During stop mode, press PROGRAM and the  
mark will appear  
2. Use b / B / v / V to select the track that you wish  
4. Use b / B / v / V to select the track you want to  
to erase from the Program list.  
start playing on the “Program” list.  
3. Press CLEAR. Repeat step 1-3 to erase additional  
tracks on the list.  
5. Press PLAY (N) or ENTER to start.  
Playback begins in the order in which you  
programmed the tracks. Playback stops after the  
last track on the “Program” list have played.  
6. To resume normal playback from programmed  
playback, select a track on the list and then press  
PLAY (N).  
Erasing the Complete Program List  
E
1. During stop mode, press PROGRAM and the  
mark will appear  
2. Use b / B / v / V to select “Clear All” and then  
press ENTER.  
Note:  
The programs are also cleared when the power is  
off or the disc is removed.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Zoom  
Viewing a JPEG file  
During watching pictures, press ZOOM to enlarge the  
video image (3 steps). You can move through the  
zoomed picture using b / B / v / V buttons.  
This unit can play JPEG files.  
1. Insert a JPEG files recording media.  
The PHOTO menu appears on the TV screen.  
Rotating the picture  
Press v / V during showing a picture to rotate the  
picture clockwise or counter clockwise.  
Listening to MP3/WMA music while watching  
picture  
1. Insert the disc containing the two types of file in  
the player.  
2. Press TITLE to display the PHOTO menu.  
3. Press v / V to select a photo file.  
4. Use B to select  
icon then press ENTER.  
Playback starts.  
5. To return to the PHOTO menu while watching  
2. Press v / V to select a folder, and press ENTER.  
A list of files in the folder appears.  
3. If you want to view a particular file, press v / V to  
highlight a file and press ENTER or PLAY (N).  
4. To return to the PHOTO menu while watching  
pictures, press STOP (x).  
pictures, press STOP (x).  
Tip:  
To listen to only the desired music while watching  
picture, program the desired files from the “MUSIC”  
menu and then proceed as above.  
Tips:  
• If you are in a file list and want to return to the  
previous Folder list, use v / V buttons to highlight  
JPEG disc compatibility with this player is  
limited as follows:  
and press ENTER.  
• Press DVD MENU to move to the next page.  
• There are three Slide Speed options:  
>>> (Fast), >> (Normal) and > (Slow).  
• Photo size: Less than 5 MB recommended  
• Depending upon the size and the number of  
JPEG files, it could take a long time for the DVD  
player to read the disc’s contents. If you do not  
see an on-screen display after several minutes,  
some of the files may be too large — reduce the  
resolution of the JPEG files to less than 5 million  
pixels and burn another disc.  
Use b / B / v / V to highlight  
. Then, use b / B  
to select the option you want to use.  
• On a DISC with MP3/WMA, JPEG and MOVIE file,  
you can switch MUSIC, PHOTO and MOVIE menu.  
Press TITLE, and MUSIC, PHOTO or MOVIE word  
on top of the menu is highlighted.  
• The total number of files in a folder should be less  
than 650 files.  
• While watching a picture, press RETURN (O) to  
hide the help menu.  
• Some discs may be incompatible due to a  
different recording format or the condition of disc.  
Slide Show  
• Ensure that all the selected files have the “.jpg”  
extensions when copying into the CD layout.  
Use b / B / v / V to highlight the  
then press ENTER.  
(Slide Show)  
• CD-R/RW, DVD R/RW Format: ISO 9660  
Still Picture  
• If the files have “.jpe” or “.jpeg” extensions, please  
rename them as “.jpg” file.  
1. Press PAUSE/STEP (X) during slide show.  
The player will now go into pause mode.  
2. To return to the slide show, press PLAY (N) or  
press PAUSE/STEP (X) again.  
• File names without “.jpg” extension will not be  
able to be read by this unit. Even though the files  
are shown as JPEG image files in Windows  
Explorer.  
Moving to another file  
Press SKIP (. or >) or cursor (b or B) once  
during viewing a picture to advance to the next or  
previous file.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing a MPEG4 Movie file  
This unit can play MPEG4 files.  
MPEG4 disc compatibility with this player is  
limited as follows:  
• Available resolution size of the MPEG4 file is  
under 720x576 (W x H) pixel.  
1. Insert a MPEG4 file recording media.  
The MOVIE menu appears on the TV screen.  
• The file name of the MPEG4 subtitle is available  
by 56 characters.  
• The total number of files in a folder should be less  
than 650 files.  
• CD-R/RW, DVD R/RW Format: ISO 9660  
• If there is impossible code to express in the  
MPEG4 file, it may be displayed as “ _ ” mark on  
the display.  
If the number of the screen frame is over 30  
per 1 second, this unit may not operate  
normally.  
2. Press v / V to select a folder, and press  
If the video and audio structure of recorded  
file is not interleaved, either video or audio is  
outputted.  
ENTER. A list of files in the folder appears.  
3. If you want to view a particular file, press v / V to  
highlight a file and press ENTER or PLAY (N).  
You can use variable playback functions.  
Refer to page 16-17.  
If the file is recorded with GMC, the unit  
supports only 1-point of the record level.  
GMC?  
*
GMC is the acronym for Global Motion  
Compensation. It is an encoding tool specified in  
MPEG4 standard. Some MPEG4 encoders, like  
MPEG4 have this option.  
There are different levels of GMC encoding,  
usually called 1-point, 2-point, or 3-point GMC.  
4. Press STOP (x) to stop the playback.  
The MOVIE menu appears.  
Tips:  
• If you are in a file list and want to return to the  
previous Folder list, use the v / V buttons on the  
Playable MPEG4 file  
remote to highlight  
and press ENTER.  
.avi, .mpg, .mpeg  
• Press DVD MENU to move to the next page.  
• This unit does not support the DivX file.  
• On a CD with MP3/WMA, JPEG and MOVIE file,  
you can switch MUSIC, PHOTO and MOVIE menu.  
Press TITLE, and MUSIC, PHOTO or MOVIE word  
on top of the menu is highlighted.  
Playable Subtitle format  
SubRip(*.srt/*.txt)  
SAMI(*.smi)  
SubStation Alpha(*.ssa/*.txt)  
MicroDVD(*.sub/*.txt)  
SubViewer 2.0(*.sub/*.txt)  
TMPlayer(*.txt)  
• The disc subtitle may not be displayed properly, if a  
MPEG4 subtitle is downloaded through the internet.  
• If the Disc Subtitle setup menu does not have the  
MPEG4 subtitle language you are going to play, the  
subtitle may not be displayed properly.  
DVD Subtitle System(*.txt)  
VobSub(*.sub): Sub/idx, stream based format  
Notice for displaying the MPEG4 subtitle  
Playable Audio format  
If the subtitle does not display properly, please follow  
the steps below.  
“Dolby Digital”, “PCM”, “MP3”, “WMA”, DTS  
• Sampling frequency: within 8 - 48 kHz (MP3),  
within 22 - 48 kHz (WMA)  
• Bit rate: within 8 - 320 kbps (MP3),  
32 - 256 kbps (WMA)  
1. During playback, press and hold SUBTITLE (  
for about 3 seconds. The language code will  
appear.  
)
• Not all the WMA Audio format is compatible with  
this unit.  
2. Press b / B to select another language code until  
the subtitle is displayed properly.  
Notes on MPEG4 format  
3. Press ENTER.  
The “This file has the non-supported type on the  
player. Please movie into browser and select the  
other file.” will appear if this unit does not support the  
MPEG4 file.  
Note:  
The MPEG4 subtitle file name has to be identified with  
the MPEG4 file name to display by this unit.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing a DVD VR format Disc  
This unit will play DVD-RW disc that is recorded  
using the Video Recording (VR) format.  
1. Insert a disc and close the tray.  
The DVD-VR menu appears on the TV screen.  
2. Press v / V to select a title then press  
PLAY (N) or ENTER and playback starts.  
3. Press DVD MENU to move to the list menu.  
Notes:  
This unit will play DVD-R/RW disc that is recorded  
using the DVD-Video format that have been  
finalized using a DVD-recorder. Unfinalized DVD-  
R/RW discs cannot be played in this player.  
Some DVD-VR disc are made with CPRM data by  
DVD RECORDER. Player does not support these  
kinds of discs.  
What is CPRM?  
CPRM is a copy protection system (with scramble  
system) only allowing the recording of ‘copy once’  
broadcast programs. CPRM stands for Content  
Protection for Recordable Media.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference  
Remote Control Function  
Maintenance and Service  
Refer to the information in this chapter before  
contacting a service technician.  
Remote Control C1/C2/C3 Code Switching  
This unit is initially set to C3 code (JVC DVD  
PLAYER code). You can easily change the  
Remote Control code to C1 (JVC VCR code), C2  
(JVC DVD RECORDER code) or C3 as shown  
below.  
Handling the Unit  
When shipping the unit  
Please save the original shipping carton and packing  
materials. If you need to ship the unit, for maximum  
protection, re-pack the unit as it was originally packed  
at the factory.  
Keeping the exterior surfaces clean  
STANDBY/ON  
x
• Do not use volatile liquids such as insecticide spray  
near the unit.  
• Do not leave rubber or plastic products in contact  
with the unit for a long period of time. since they  
leave marks on the surface.  
ENTER  
Cleaning the unit  
To clean the player, use a soft, dry cloth. If the  
surfaces are extremely dirty, use a soft cloth lightly  
moistened with a mild detergent solution.  
Do not use strong solvents such as alcohol, benzine,  
or thinner, as these might damage the surface of the  
unit.  
1-3  
Maintaining the Unit  
The unit is a high-tech, precision device. If the optical  
pick-up lens and disc drive parts are dirty or worn, the  
picture quality could be diminished.  
Depending on the operating environment, regular  
inspection and maintenance are recommended after  
every 1,000 hours of use.  
For details, please contact your nearest authorized  
service center.  
Keep pressing ENTER down during step 1.  
1. Press the number Key “1” for C1, “2” for C2 or  
“3” for C3 to change the remote control code.  
2. Press STANDBY/ON (1/\) to turn on the unit.  
3. Press x on the unit for over 5 seconds while the  
unit is turned on. The code currently set appears  
on the front display panel.  
4. Press ENTER on the remote control to change the  
unit's code. The code currently set on the remote  
control is displayed on the front display panel for  
approximately 5 seconds, and is applied to the  
unit.  
Note:  
If you change the batteries of the Remote Control with  
C1 or C2 code, the remote control code is set to C3  
automatically. In this case, you should reset the  
remote control code described above.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language Codes  
Use this list to input your desired language for the following initial settings:  
Disc Audio, Disc Subtitle, Disc Menu.  
Language  
Abkhazian  
Afar  
Code  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
6678  
6890  
6672  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
Language  
Fiji  
Code  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
7686  
Language  
Lingala  
Code  
7678  
7684  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8065  
8083  
7065  
8076  
8084  
8185  
Language  
Singhalese  
Slovak  
Slovenian  
Somali  
Spanish  
Sudanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Code  
8373  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Finnish  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Afrikaans  
Albanian  
Ameharic  
Arabic  
French  
Frisian  
Galician  
Georgian  
German  
Greek  
Malayalam  
Maltese  
Armenian  
Assamese  
Aymara  
Maori  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Marathi  
Azerbaijani  
Bashkir  
Moldavian  
Mongolian  
Nauru  
Tamil  
Basque  
Tatar  
Bengali; Bangla  
Bhutani  
Hebrew  
Hindi  
Nepali  
Telugu  
Thai  
Norwegian  
Oriya  
Bihari  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Irish  
Tibetan  
Tigrinya  
Tonga  
Breton  
Panjabi  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Pashto, Pushto  
Persian  
Turkish  
Turkmen  
Twi  
Polish  
Italian  
Portuguese  
Quechua  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kirghiz  
Ukrainian  
Urdu  
Chinese  
Corsican  
Croatian  
Czech  
Rhaeto-Romance 8277  
Rumanian  
Russian  
8279  
8285  
8377  
8365  
7168  
8382  
8372  
8378  
8368  
Uzbek  
Vietnamese  
Volapük  
Welsh  
Samoan  
Danish  
Sanskrit  
Dutch  
Korean  
Scots Gaelic  
Serbian  
Wolof  
English  
Kurdish  
Laothian  
Latin  
Xhosa  
Esperanto  
Estonian  
Faroese  
Serbo-Croatian  
Shona  
Yiddish  
Yoruba  
Zulu  
Latvian, Lettish  
Sindhi  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Possible Cause  
Correction  
Symptom  
• The power cord is disconnected.  
• Plug the power cord into the wall outlet  
securely.  
No power.  
• No disc is inserted.  
• Insert a disc. (Check the disc indicator  
in the display window is lit.)  
The power is on, but  
the DVD player does  
not work.  
Your TV does not accept the  
resolution that you set on the unit.  
• Please read TV’s owner’s manual then  
use RESOLUTION button to set the  
resolution that your TV can accept.  
No picture.  
• The TV is not set to receive DVD  
signal output.  
• Select the appropriate video input  
mode on the TV.  
• The video cable is not connected  
securely.  
• Connect the video cable securely.  
• The equipment connected with the  
audio cable is not set to receive DVD  
signal output.  
• Select the correct input mode of the  
audio receiver so you can listen to the  
sound from the DVD player.  
No sound.  
• The power of the equipment  
connected with the audio cable is  
turned off.  
• Turn on the equipment connected with  
the audio cable.  
• The AUDIO options are set to the  
wrong position.  
• Set the AUDIO option to the correct  
position, then turn on the DVD player  
again by pressing STANDBY/ON.  
• An unplayable disc is inserted.  
• Insert a playable disc. (Check the disc  
type and regional code.)  
The DVD player does  
not start playback.  
• The remote control is not pointed at  
the remote sensor on the DVD player.  
• Point the remote control at the remote  
sensor of the DVD player.  
The remote control  
does not work properly.  
• The remote control is too far from the  
DVD player.  
• Operate the remote control closer to  
the DVD player.  
• The current remote control code does  
not match the unit.  
• Identify the remote control code with  
the code of unit. (See page 24).  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
Power requirements:  
Power consumption:  
Dimensions (Approx.):  
Net weight (Approx.):  
Operating temperature:  
Operating humidity:  
AC 110-240 V ~ 50/60 Hz  
9 W  
430 x 39 x 192 mm (17 x 1.5 x 7.6 inches) (W x H x D) without foot  
1.5 kg (3.3 lbs)  
5 °C to 35 °C (41 °F to 95 °F)  
5 % to 90 %  
Outputs  
VIDEO OUTPUT:  
1.0 V (p-p), 75 , sync negative, RCA jack x 1  
S-VIDEO OUTPUT:  
(Y) 1.0 V (p-p), 75 , negative sync, Mini DIN 4-pin x 1  
(C) 0.3 V (p-p) 75 Ω  
COMPONENT VIDEO OUTPUT:  
(Y) 1.0 V (p-p), 75 ,negative sync, RCA jack x 1  
(Pb)/(Pr) 0.7 V (p-p), 75 , RCA jack x 2  
HDMI OUTPUT (Video/Audio):  
AUDIO OUTPUT:  
19 pin (HDMI standard, Type A)  
2.0 Vrms (1 KHz, 0 dB), 600 , RCA jack (L, R) x 1  
DIGITAL AUDIO OUTPUT:  
COAXIAL: 0.5 V (p-p), 75 , RCA jack x 1  
OPTICAL: 3 V (p-p), Optical jack x 1  
System  
Laser:  
Semiconductor laser, wavelength 650 nm  
NTSC  
Signal system:  
Frequency response:  
DVD (PCM 96 kHz): 8 Hz to 44 kHz  
DVD (PCM 48 kHz): 8 Hz to 22 kHz  
CD: 8 Hz to 20 kHz  
Signal-to-noise ratio:  
Harmonic distortion:  
Dynamic range:  
More than 90 dB (ANALOG OUT connectors only)  
Less than 0.02%  
More than 95 dB (DVD/CD)  
Accessories  
Video cable (1), Audio cable (1), Remote control (1), Batteries (2)  
Note: Design and specifications are subject to change without prior notice.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
0309SKMLGEEGL  
EN  
P/N: MFL62178452  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Insignia Home Theater System NS HT511 User Manual
JBL Speaker EON Sub G2 User Manual
John Deere Cordless Saw ET 3406 J User Manual
John Deere Portable Generator AC G3010H User Manual
JVC Camcorder GR DVX 400 User Manual
Kalorik Convection Oven DGR 31031 User Manual
Keys Fitness Home Gym CG2 User Manual
Kicker Headphones HP1972 User Manual
Knoll Stereo Amplifier MX855 User Manual
Kodak Scanner Digital Ice Technology User Manual