IFSYS-7000 IrDATM SIR Endec Chip (SOP8)
Product Brief
The IFSYS -7000 is designed to be used as an add on peripheral IC for any
SIR IrDATM compliant optoelectronic transceiver. It is ideally suited to
applications requiring low cost and low power communication based on the
IrDATM standard. IFSYS-7000 does not require an external crystal; it utilizes
a 16X clock from the host system to provide the 16X baud rate clock for both
encoding and decoding, using infrared pulse widths of 3/16th the bit time.
iFoundry’s IFSYS-7000 supports the full complement of IrDATM V1.1 baud
rates, from 9,600 bps right up to 115,200bps.
IFSYS-7000
Key features
ꢀ Wide voltage operating range (2.7V – 5.5V). Single power supply
input.
ꢀ Small form factor 8-pin SOP package.
ꢀ Operates in 3/16th mode transmit pulse width.
ꢀ Operates from an external 16X clock input from the host processor
or UART. Supports the following speeds:
•
•
•
•
•
9,600bps
19,200bps
38,400bps
57,600bps
115,200bps
Sample Block Diagram
Specifications subject to change
Doc. P/N: MDMA01479
Rev. 1.80
© 2007 iFoundry Systems
19 Apr 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
|