Gateway Network Router HG256S User Manual

HUAWEI HG256s

Home Gateway Quick Start

1 Introduction

The Front Panel of the HG256s

The front panel of the HG256s provides the following indicators:



One power indicator: POWER



One Internet indicator: INTERNET



One WiFi indicator: WLAN



Two VoIP indicators: VOIP1, VOIP2



Four LAN indicators: LAN1, LAN2, LAN3, LAN4



One USB indicator: USB

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Installation Guide

The figure as below shows the cable connections.

Network jack on the wall

Set-top box

Phone

Power adapter

3 Getting Started

To power on the HG256s, press the ON/OFF button on the side panel of the HG256s.

After you power on the HG256s, the POWER and INTERNET indicators turn solid

on, which indicates that the HG256s is working properly.

Download from Www.Somanuals.com. All Manuals Search And Download.

4 Configuring the Wireless Network

Connection

If a wireless network adapter is installed on your computer, you can connect your

computer to the HG256s through a wireless connection.

There are two methods to configure the wireless network connection.

Setting Up a Wireless Connection Manually

To configure the wireless network connection through the web page, do as follows:

Step 1 Record the WLAN name.

The WLAN name (SSID) of the HG256s is preset before delivery. You can find it

from the label on the rear panel of the HG256s or consult the Internet Service

Provider (ISP).

Step 2 Configure the wireless network connection on your computer (taking the

Windows XP operating system as an example):

1. Choose Start > All Programs > Accessories > Communications >

Network Connections.

Download from Www.Somanuals.com. All Manuals Search And Download.

2. In the Network Connections window, right-click Wireless Network

Connection to display a shortcut menu, and then select View Available

Wireless Networks from the shortcut menu.

3. Select the wireless network that is configured in Step 1 from the wireless

network list, and then click Connect in the lower right corner of the

window.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connected appears on the icon of the wireless network in the wireless network list,

which indicates that your computer is connected to the HG256s through wireless

connection.

Setting Up a Wireless Connection by the WPS button

If the wireless network adapter on your computer can support the WPS function, you

can connect your computer to the HG256s wirelessly as follows:

Step 1 Set the network connection of your PC and ensure that your PC obtains an IP

address automatically.

By default, the DHCP function of the HG256s is enabled. In this case, the

HG256s assigns an IP address to your PC automatically and you do not need

to configure the IP address of your PC.

Step 2 In the address bar of the Internet Explorer, enter

press Enter.

, and then

http://192.168.1.1

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 3 In the

dialog box, enter the user account (

password (admin by default), and then click OK.

Step 4 In the navigation tree, choose

admin

by default) and the

Basic WLAN

The WLAN configuration page is displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 5 Set the

Security Mode WPA-PSK WPA2-PSK

to or

WPA-PSK/WPA2-PSK.

The WPS function can be used only when the security mode of the WLAN is set to

WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK.

Step 6 In

, enter a WLAN access password.

WPA Pre-Shared Key

Step 7 Select

Step 8 Click

for

AES

WPA Encryption

Submit

Step 9 Press the WPS button to enable the HG256s to start the WPS negotiation.

Step 10 Enable the WPS negotiation function of the wireless network adapter on your

PC within two minutes, and then wait for a moment (typically 10s).

The WLAN indicator of the HG256s becomes on from the blinking state, indicating

that the HG256s is connected to your PC through the WLAN.

For more information about the functions and the configuration of the HG256s,

please see the User Guide contained in the CD-ROM.

Download from Www.Somanuals.com. All Manuals Search And Download.

5 Configuring the WLAN MAC filtering

By default, the security mode of the WLAN is set to OPEN without any encryption and

authentication mechanism. You can protect a wireless network by the WLAN MAC

filtering function of the HG256s.

To protect a wireless network by the WLAN MAC filtering function, do as follows:

Step 1 View and record the MAC address of the laptop.

Take the Windows XP operating system as an example. To view the MAC address of a

PC, do as follows:

1. Choose Start > Run, enter cmd.

2. In the displayed command line window, enter ipconfig/all.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. You can find a line of information that is similar to Physical

Address. . . . . . . . . : 00-19-B9-F9-59-BB.

00-19-B9-F9-59-BB is the MAC address of the PC.

Step 2 Log in to the home page of the HG256s.

1. In the address bar of the Internet Explorer, enter http://192.168.1.1, and

then press Enter.

Download from Www.Somanuals.com. All Manuals Search And Download.

2. In the Login dialog box, enter the user account (admin by default) and

the password (admin by default), and then click OK.

Step 3 Specify the SSID name of WLAN.

1. In the navigation tree, choose Basic > WLAN.

The WLAN page will be shown as below:

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Enter the SSID name in the SSID text box (for example HG256s) and

keep the other parameters as default.

Step 4 Click

and select

WLAN Filtering

Enable

Step 5 Select

for

and then click

Whitelist

Filtering mode

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 6 In

, enter the MAC address of the laptop.

Source MAC address

For example, the MAC address can be 00:19:B9:F9:59:BB.

The format of the MAC address entered in Source MAC address is

different from that of the MAC address displayed in the command line

window of a Windows XP operating system. The colons (:) replace the

hyphens (-).

Step 7 Click

Submit

After finish the settings, you can allow only the PC with the MAC address is

00:19:B9:F9:59:BB to connect to the WLAN.

Download from Www.Somanuals.com. All Manuals Search And Download.

When you select Blacklist for Filtering mode, you can use the same way to prohibit

specified PCs from being connected to the WLAN.

By default, the security mode of the WLAN is set to OPEN. It is highly

recommended that you should set the security mode to WPA2-PSK for

the WLAN and set the encryption as AES. In advance, you need to ensure

your wireless adapter can support the security and encryption mode.

reserved.

Trademarks and Permissions

, and

are trademarks or registered trademarks of

Huawei Technologies Co., Ltd.

Other trademarks, product, service and company names mentioned are the

property of their respective owners.

NO WARRANTY

THE CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS". EXCEPT AS

REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND,

EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY,

RELIABILITY OR CONTENTS OF THIS MANUAL.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO

CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY

SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR

LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR

ANTICIPATED SAVINGS.

Issue: 03 (2011-01-28)

Part Number: 201232

Download from Www.Somanuals.com. All Manuals Search And Download.

Echo Brush Cutter 99944200 User Manual
EdgeStar Air Conditioner ap12000s User Manual
FieldServer Computer Drive FS 8700 60 User Manual
Fisher VCR FVH T610 User Manual
Fluke Car Amplifier 5220A User Manual
Fujioh Ventilation Hood BUF 03A User Manual
Furuno Radar Detector CSH 5L User Manual
Fusionbrands Pet Fence fm 504 User Manual
GE Air Conditioner AGH06 User Manual
GE Telephone 29831 User Manual