Gaggenau Cooktop CK 481 6 User Manual

Operating and Assembly Instructions  
CK 481-6..  
Electronic Glass-Ceramic Cooktop  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cooking with your new glass-ceramic  
cooktop will be even more fun than before.  
The appliance offers you the following  
advantages:  
– A generous cooking area.  
– Cooking zones for large pans and oval shaped  
roasters – the cooking zone size can be adjusted  
individually using the combination feature.  
– Easy operation through sensor pads.  
To ensure that you will be able to use this  
appliance in all its diversity, read through  
the operating and assembly instructions  
conscientiously before operating it for the first  
time. The instructions contain important notes  
on use, installation and maintenance of the  
appliance.  
On the following pages you will find important  
notes on safety and operation. These will serve to  
ensure your personal safety and the lasting value  
of your appliance.  
You will find notes on page 4 that you ought to  
observe before operating the appliance for the  
first time.  
The chapters entitled “Features", “Operating  
principles" and “Operation" tell you all about what  
your appliance can do and how you operate it.  
The chapter entitled “Cleaning and care" will  
make sure that your appliance will stay operable  
and beautiful for a long time.  
And now we wish you lots of fun cooking.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important safeguards  
4. a) Use Proper Pan Size – This appliance is  
equipped with one or more surface units of  
different size. Select utensils having flat  
bottoms large enough to cover the surface  
unit heating element. The use of undersized  
utensils will expose a portion of the heating  
element to direct contact and may result in  
burned clothing. Proper relationship of utensil  
to burner will also improve efficiency.  
1. Read All Instructions.  
2. To eliminate the risk of burns or fire by reaching  
over the heated surface units, cabinet storage  
space located above the surface units should be  
avoided. If cabinet storage is to be provided, the  
risk can be reduced by installing a range hood  
that projects horizontally a minimum of 5 inches  
(127 mm) beyond the bottom of cabinets.  
b) Never Leave Surface Units Unattended at  
High Heat Settings – Boilover causes smoking  
and greasy spillovers that may ignite.  
c) Glazed Cooking Utensils – Only certain types  
of glass, glass / ceramic, ceramic, earth-  
enware or other glazed utensils are suitable  
for rangetop service without breaking due to  
the sudden change in temperature.  
d) Utensil Handles Should Be Turned Inward and  
Not Extend Over Adjacent Surface Units –  
To reduce the risk of burns, ignition of  
flammable materials, and spillage due to  
unintentional contact with the utensil, the  
handle of a utensil should be positioned so  
that it is turned inward, and does not extend  
over adjacent surface units.  
3. Important instructions  
a) Ensure that this appliance is properly  
connected and grounded by a qualified  
electrician.  
b) Never use this appliance for warming or  
heating the room.  
c) Do Not Leave Children Alone – Children  
should not be left alone or unattended in area  
where appliances are in use. They should  
never be allowed to sit or stand on any part  
of the appliance.  
d) Wear Proper Apparel – Loose fitting or  
hanging garments should never be worn  
while using the appliance.  
e) User Servicing – Do not repair or replace  
any part of the appliance unless specifically  
recomended in the manual. All other  
servicing should be referred to a qualified  
technician.  
f) Storage in or on Appliance – Flammable  
materials should not be stored in an oven or  
near surface units.  
5. a) Do Not Cook on Broken Cooktop – If cooktop  
should break, cleaning solutions and  
spillovers may penetrate the broken cooktop  
and create a risk of electric shock.  
Contact a qualified technician immediately.  
b) Clean Cooktop With Caution – If a wet  
sponge or cloth is used to wipe spills on a hot  
cooking area, be careful to avoid steam burn.  
Some cleaners can produce noxious fumes if  
applied to a hot surface.  
g) Do Not Use Water on Grease Fires – Smother  
fire or flame or use dry chemical or foam-type  
extinguisher.  
h) Use Only Dry Potholders – Moist or damp  
potholders on hot surface may result in burns  
from steam. Do not let potholders touch hot  
heating elements. Do not use a towel or other  
bulky cloth.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. CAUTION:  
8. The surface temperature of the glass top is pro-  
tected by high limit thermostats built into each  
individual burner. The maximum temperature of  
the glass ceramic top is rated at 1 080° F. The  
thermal protectors are rated at 939° F to cycle  
the burner off in order to protect the glass top.  
Do not store items of interest to children in  
cabinets above a range. Children climbing on  
the appliance to reach items could be seriously  
injured.  
7. DO NOT TOUCH SURFACE UNITS OR AREAS  
NEAR UNITS – Surface units may be hot even  
though they are dark in color. Areas near surface  
units may become hot enough to cause burns.  
During and after use, do not touch or let clothing  
or other flammable materials contact heating  
elements or areas near units until they have had  
sufficient time to cool.  
Even on the highest setting, it is normal for the  
burner to cycle on and off momentarily as the  
thermostat senses a high heat condition. This  
could be caused by size of the cooking utensil,  
composition and gauge of materials in the  
construction of the utensil and, most importantly,  
the amount of surface contact between the glass  
surface and the cooking utensil. Uneven  
surfaces on cookware can cause premature  
cycling of the high heat limit protection system.  
9. Note – To avoid jeopardising the electrical  
safety of the appliance, it is forbidden to use  
high-pressure or steam jet cleaning devices.  
10.Save These Instructions.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Important notes  
For your safety  
You must not operate the appliance if it is damaged. Do not store any substances that are sensitive to  
high temperatures, or which pose a fire hazard (e.g.  
The appliance must only be connected by  
cleaning agents or spray cans), in drawers or  
an authorised specialist, paying attention to  
cupboards under the appliance.  
the relevant regulations of the power supply  
companies and the regional construction  
regulations.  
Observe the assembly instructions!  
The appliance could be damaged if connected  
wrongly!  
Operation of the appliance must be discontinued  
immediately if improper use produces cracks,  
breaks or flaws on the cooking surface, with the  
result that live parts can come into contact directly  
or indirectly with seeping liquid or if there is a risk  
of injury. Remove the mains plug or switch off the  
corresponding mains fuse. Call after-sales service!  
When connecting electrical appliances in the  
proximity of cooking surfaces and ovens, make sure  
that connecting cables do not become jammed  
under the hot oven door or come into contact with  
hot cooking surfaces.  
Isolate the appliance from the mains during every  
maintenance operation. To do this, remove the  
mains plug or switch off the corresponding fuse.  
Only ever operate the appliance under supervision.  
Observe caution with oils and fats. Overheated oils  
and fats can easily cause fires.  
Repairs must be carried out by authorised  
specialists, thus ensuring electrical safety.  
As the user, you are responsible for maintenance  
and proper use in the household. No warranty  
claims can be lodged for any damage resulting  
from failure to observe these instructions.  
Caution: the appliance heats up during operation.  
Keep children away.  
Do not operate the cooking positions without pots  
and pans placed on them.  
Subject to technical change without notice.  
To avoid jeopardising the electrical safety of the  
appliance, do not use high-pressure or steam jet  
cleaning devices.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating for the first time  
About use  
Remove the packaging from the appliance and  
dispose of it according to local regulations. Be  
careful to remove all accessories from the  
packaging. Keep packaging elements and plastic  
bags away from children.  
The appliance is intended solely for household use  
and must not be put to any other uses.  
Use the appliance to prepare meals only. Do not use  
the appliance to heat up the room in which it is  
installed.  
Check the appliance for transport damage before  
installing it.  
Do not use the cooking surface as space to store  
items. Do not place any hot pots on the display  
panel.  
The appliance must be installed and connected by  
an authorised specialist before operation. Before  
operating the appliance for the first time, make  
sure that the mains connection is in proper working  
order.  
Place a cooking vessel on the corresponding  
cooking zone before operating it. Do not remove  
the cooking vessel until you have switched off the  
hotplate. The size of pots and pans should corres-  
The serial number of the appliance can be found on pond to the size of the hotplate. This will save you  
the quality control slip which is included with these  
instructions. This quality control slip should be kept,  
for guarantee reasons, together with your operating  
and assembly instructions.  
energy and time.  
Switch off the cooktop after use.  
Iridiscent discoloration can be caused by the bases  
of some pots. These do not interfere with the  
operation of the glass ceramic cooktop.  
Read through these instructions attentively before  
operating your appliance for the first time.  
Always keep the cooking area and control panel  
dry and clean. The surface can be scratched due to  
dirt (e.g. sand grains).  
Thoroughly clean the appliance and accessories  
before using them for the first time. This will  
eliminate any 'newness' smells and soiling (see  
chapter “Cleaning and care”).  
Never heat food in aluminium or plastic containers  
as the material can melt and damage your cooktop.  
Tip: if you have a glass insurance, we recommend  
that you have your new glass-ceramic cooking  
range included.  
Built-in overheating protection prevents overheating  
of the appliance and of surrounding kitchen  
furniture.  
If installed above a pyrolytic oven, the overheating  
protection may be triggered when the cooktop is  
operated during a pyrolytic cleaning cycle.  
In the event of malfunction, first check your  
household fuses. If the power supply is in proper  
working order, but the appliance is still not  
functioning, please inform your specialist dealer or  
your nearest Gaggenau after-sales service.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Features  
Features of the appliance  
1 SuperQuick cooking zone Ø 5 3/4 (1050 W),  
converts to Ø 8 1/4 (2200 W)  
2
3
or to Ø 11 (3080 W)  
2 SuperQuick cooking zone Ø 7 1/8 (1800 W)  
3 SuperQuick cooking zone Ø 7 1/8 (1800 W)  
cooking zones 2 and 3 plus additional zone  
800 W convert to 7 1/8 x 16 3/8 (4400 W)  
4 SuperQuick cooking zone Ø 5 3/4 (1200 W),  
5 Display panel  
1
4
5
Control panel  
6 Cooking level display  
7 Cooking zone selection  
8 Main switch  
9 Timer display  
6
10 Timer switch  
11 UP-/DOWN-symbols to select cooking level  
7
and timer  
12 Cooking zone extension switch  
12 11  
10  
9
8
You can order the following special accessory:  
BT 481-000 Non-stick coated roaster with lid,  
suitable for the roasting zone  
Special accessories  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Operating principles  
The cooking range is operated by touch control  
sensors. Touch the required sensor pad in the  
shaded area as shown in the picture. You only need  
to touch the pad with your finger, no pressure is  
required. Every accepted input is confirmed by an  
audible signal.  
Sensor pads  
Always keep the control panel clean. Do not place  
hot cooking dishes on the control panel.  
When you touch more than one sensor pad  
simultaneously or if any object (e.g. cooking spoon,  
dish cloth) lie on the sensor pads, the appliance  
registers this as an error. No input is registered and  
several short tones are sounded.  
When the appliance is switched on, a spot lights up  
on the main switch symbol.  
Display  
The given cooking level is shown on the display of  
each cooking zone.  
A flashing display shows that a value has not yet  
been confirmed.  
The residual heat display appears on the display of  
the relevant cooking zone after switching off.  
Residual heat display  
The moving zero in the cooking level display  
indicates that, after switching off, a cooking zone  
has still not cooled down to such an extent that it  
can be safely touched.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional features  
Cooking zone extension page 14-15  
Overheating protection page 19  
The front left cooking zone can be extended to a  
middle or large diameter.  
The electronics of the cooking range are equipped  
with an overheating protection.  
Both rear cooking zones convert, together with an  
additional zone, to an oval cooking zone especially  
suitable for roasters.  
Holiday safeguard page 19  
If you should ever forget to switch off a cooking  
zone after use, the appliance is set to automatically  
switch off a cooking zone 4 hours after the last  
operation.  
Automatic quick-boil function page 16  
The cooking range features an automatic quick-boil  
function. The feature is selected by touching the  
required cooking zone twice on the control panel.  
The cooking zone returns to the selected level after  
the quick-boil time has expired.  
Child lock page 19  
It is possible to avoid switching on the appliance  
accidentally by using the child lock. The child lock  
function is de-activated when delivered and must  
be chosen in the options menu.  
Memory function page 12  
The cooking range stores all the set cooking levels  
and time values for 15 seconds after it has been  
switched off. You are therefore able to retrieve all  
the previous values should you switch it off  
accidentally.  
Options menu page 20-23  
Using the options menu, the automatic quick-boil  
function, cooking zone extension and the child lock  
can be programmed to suit your individual needs.  
Timer page 17-18  
It is possible to program an automatic switch-off  
time for one or several of the cooking zones. It is  
also possible to use the timer independently.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Operation  
Switching the cooktop on and off  
Switching the cooktop on and off  
Touch the main switch symbol. An audible signal is  
sounded and a spot lights on the main switch  
symbol. All the cooking zone display show 0. The  
cooktop is now in operation.  
If no further inputs are made within approx.  
20 seconds the cooktop automatically switches off.  
By touching the main switch symbol at any time the  
cooktop can be quickly switched off.  
Switching on a cooking zone  
Switching on a cooking zone  
The cooktop must be switched on by the main  
switch. The switching on and off for all cooking  
zones is identical.  
• Touch the required cooking zone in the control  
panel. The zero on the display of the selected  
cooking zone flashes.  
• Select the required cooking level within  
5 seconds using the UP/DOWN symbols.  
(You can immediately select level 9, 8, etc. using  
the DOWN symbol.) The display of the cooking  
zone flashes the chosen level. Note: if no input is  
given within 5 seconds the cooking zone must be  
re-activated.  
• The selected cooking level is confirmed after a  
few seconds by an audible signal and the display  
lights constantly. Alternatively you can confirm the  
values by again touching the cooking zone in the  
control panel.  
• The cooking zones are elecronically controlled  
and during use, in order to maintain a constant  
heat, the cooking zone switches on and off  
intermittently.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the cooking level  
• Touch the required cooking zone in the control  
panel. The display of the cooking zone flashes.  
Changing the cooking level  
• Select the required cooking level using the  
UP/DOWN symbols. The display of the cooking  
zone shows the chosen level.  
Switching off a cooking zone  
• Touch the required cooking zone in the control  
panel. The display of the cooking zone flashes.  
Switching off a cooking zone  
• Touch the the UP/DOWN symbols simultaneously.  
Or: Touch the the DOWN symbol, until the display  
of the cooking zone shows a zero. The cooking  
zone is now switched off.  
• The residual heat symbol lights in the display of  
the cooking zone.  
Note: if you want to switch off the whole cooktop  
(i.e. when something is boiling over) then simply  
touch the main switch.  
Residual heat display  
Residual heat display  
Once you have switched off a cooking zone,  
residual heat is shown on the display as a moving  
zero. This indicates that the cooking zone is still  
giving off heat and has not cooled down sufficiently  
to be touched safely.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The cooking range stores all the set cooking levels  
and time values for 15 seconds after it has been  
switched off. You are therefore able to retrieve all  
the previous values should you switch it off  
accidentally.  
Memory function  
Proceed as follows:  
• Touch the main switch. The previous values flash  
on the display panel.  
• Should you wish to accept the stored values:  
tap the symbol timer within 5 seconds. You will  
hear a signal. The previous values are now  
accepted.  
• Failure to follow the above procedure exactly  
results in the stored values being lost.  
Pots and saucepans should always be covered by a  
matching lid. The cooking time is shortened and  
the energy use reduced.  
Energy saving tips  
Pay attention to the right size when choosing pots  
and pans. The diameters of pots and pans should  
correspond to that of the hotplate. When buying  
pots, pay attention to the fact that the manufacturer  
frequently specifies the top pot diameter, which is  
generally larger than the diameter of the base.  
We recommend that you use high quality pots and  
pans with thick flat bases.  
For longer cooking times, it is possible to switch off  
the cooking zone before the end of the cooking  
time to make use of the residual heat.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings table  
Cooking  
level  
Cooking method  
Examples  
9
Boiling  
Water  
Searing  
Heating  
Boiling  
Meat  
Fat, liquids  
Soup, sauce  
Vegetables  
Blanching  
8 - 6  
7 - 6  
Roasting  
Meat, fish, potatoes  
Browning  
Flour, onions  
Roasting  
Almonds, breadcrumbs  
Pancakes, egg dishes  
Liquids  
Baking  
Boiling in open pot  
6 - 5  
5 - 4  
Frying  
Bacon  
Reducing  
Stocks, sauces  
Simmering  
Simmering in open pot  
Sweet sauces  
Dumplings, sausages, soup garnish,  
meat stock, poached eggs  
4 - 3  
3 - 1  
Boiling with closed lid  
Steaming  
Pasta, soup, sauces  
Vegetables, potatoes, fish  
Vegetables, fruit, fish  
Stewing  
Braising  
Thawing  
Goulash, rolled beef steaks, roasts, vegetables  
Frozen foods  
Slow cooking  
Rice, pulses  
Reheating / keeping warm  
Melting  
Soup, casserole, vegetables in a sauce  
Butter, chocolate  
Thickening  
Egg dishes  
Switch to the highest cooking level in order to reach the required temperature quickly. Then always switch  
back to the lower cooking level.  
The cooking levels are identical for all cooking zones.  
The values given above must be looked upon as recommended values. The heat required depends not  
only on the type and condition of the food, but also the size and contents of the pot.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Additional functions  
The front left cooking zone can be extended to a  
middle or large diameter. In the options menu it is  
possible to choose the larger diameters as the  
standard cooking zone.  
Cooking zone extension front left  
Activating extension,  
front left cooking zone  
Activating extension,  
front left cooking zone  
The cooktop must be switched on by the main  
switch.  
• Touch the front left cooking zone in the control  
panel. The zero on the display of the cooking zone  
flashes.  
• Touch the + symbol until the symbol for the  
required extension flashes on the display.  
• Now select the required cooking level using the  
UP/DOWN symbols. The display of the cooking  
zone flashes the chosen level.  
• The selected cooking level is confirmed after a  
few seconds by an audible signal and the display  
lights constantly. Alternatively you can confirm the  
values by again touching the cooking zone in the  
control panel.  
De-activating extension,  
front left cooking zone  
De-activating extension,  
front left cooking zone  
• Touch the front left cooking zone in the control  
panel. The cooking level on the display of the  
cooking zone flashes.  
• Touch the + symbol until the symbol for the  
required extension disappears from the display.  
• The cooking zone will now continue to operate on  
the chosen level without the extension.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Both rear cooking zones convert together with an  
additional zone, to create an oval cooking zone  
especially suitable for roasters. In the options menu  
it is possible to choose the oval cooking zone as the  
standard cooking zone.  
Cooking zone extension rear  
Activating extension,  
rear cooking zones  
Both rear cooking zones and the additional zone  
operate as one single cooking zone. Each input for  
one cooking zone will include both cooking zones  
and the additional zone.  
Activating extension, rear cooking zones  
The cooktop must be switched on by the main  
switch.  
• Touch either of the rear cooking zones in the  
control panel. The zero on the display of the  
cooking zone flashes.  
• Touch the + symbol. The extension symbol flashes  
on the display.  
• Now select the required cooking level using the  
UP/DOWN symbols. The display of both cooking  
zones flashes the chosen level.  
• The selected cooking level is confirmed after a  
few seconds by an audible signal and the display  
lights constantly. Alternatively you can confirm the  
values by again touching the cooking zone in the  
control panel.  
De-activating extension,  
rear cooking zones  
De-activating extension, rear cooking zones  
• Touch either of the rear cooking zones in the  
control panel. The cooking level on the displays of  
both cooking zones flashes.  
• Touch the + symbol. The extension symbol  
disappears from the display.  
• Both cooking zones will now continue to operate  
on the chosen level without the extension. Both  
cooking zones can now be adjusted and used  
seperately.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
All cooking zones feature an automatic quick-boil  
function. When the automatic quick boil function is  
activated, the set cooking level is boosted for  
several minutes. This ensures that the continued  
cooking or simmering temperature of the food is  
reached faster. The length of the automatic quick-  
boil function can be changed in the options menu.  
The appliance is pre-set to a standard of four  
minutes on delivery. The appliance switches  
automatically to the set simmering or cooking level  
after the quick boil time has elapsed.  
Automatic quick-boil function  
Switching on the automatic quick-boil  
function  
Note: the automatic quick boil function cannot be  
activated when using cooking level 9.  
Switching on the automatic quick-boil function  
The cooktop must be switched on by the main  
switch.  
• Touch the required cooking zone in the control  
panel. The zero on the display of the selected  
cooking zone flashes.  
• Now select the required cooking level using the  
UP/DOWN symbols. The display of the cooking  
zone flashes the chosen level.  
• The selected cooking level is confirmed after a  
few seconds by an audible signal and the display  
lights constantly. Alternatively you can confirm the  
values by again touching the cooking zone in the  
control panel.  
2x  
• Re-touch the cooking zone in the control panel  
twice. The display of the cooking zone flashes  
alternatively the chosen level and the symbol A for  
automatic quick-boil.  
Switching off the automatic quick-boil  
function  
Switching off the automatic quick-boil function  
It is possible to switch off the automatic quick boil  
function prematurely (e.g. because the food is  
boiling over).  
• Touch the required cooking zone in the control  
panel twice. The symbol for automatic quick-boil  
disappears from the display. The cooking zone  
switches back to the set cooking level.  
2x  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: only ever operate the appliance under  
supervision.  
Timer operation  
It is possible to program an automatic switch-off  
time for one or several of the cooking zones. Any  
value between 1 and 90 minutes can be entered on  
the timer.  
It is also possible to use the timer independently.  
The timer can also be used when the cooktop is  
switched off.  
Programming a switch-off time  
• Set the cooking zone which you want to time to the  
required cooking level.  
Programming a switch-off time  
• Touch the timer symbol. The timer display flashes  
00. Select the required time using the  
UP-/DOWN-symbols.  
• The value is confirmed a few seconds later by an  
audible signal and the timer starts. Alternatively  
you can confirm the values by again touching the  
timer symbol in the control panel.  
• Touch the cooking zone in the display panel which  
you would like to timer operate. The display  
flashes the selected cooking level. Touch the  
timer symbol.  
• A spot appears next to the cooking level on the  
cooking zone display. The timer is now set for this  
cooking zone.  
• After the elapse of the programmed time an  
audible signal is sounded. The selected cooking  
zone is switched off. Both the selected cooking  
value and the timer flash. By touching any symbol  
on the display the audible signal is switched off  
and the cooking zone display shows zero.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing or erasing a given time value  
• Touch the timer symbol.  
Timer operation  
You can now change the programmed time using  
the UP-/DOWN-symbols. Touch the UP-/DOWN-  
symbols simultaneously or touch the DOWN-  
symbol, until 00 shows on the display. The spot on  
the cooking zone display disappears. The timer  
program is now switched off. The cooking zone  
remains on the selected cooking level without  
timer operation.  
Programming the timer without cooking zone  
switch-off  
It is also possible to use the timer independently  
from the cooking zones and without switch-off  
function.  
Programming the timer without  
cooking zone switch-off  
Any value between 1 and 90 minutes can be  
entered on the timer.  
• Touch the timer symbol. The timer display flashes  
00. Select the required time using the  
UP-/DOWN-symbols.  
• The value is confirmed a few seconds later by an  
audible signal and the timer starts. Alternatively  
you can confirm the values by again touching the  
timer symbol in the control panel.  
• The timer display shows the elapsed time.  
• After the elapse of the programmed time an  
audible signal is sounded. The timer display  
flashes. By touching any symbol on the display the  
audible signal is switched off.  
• The timer can be switched off at any time  
by touching the timer symbol and then the  
UP-/DOWN-symbols simultaneously.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The cooktop’s electronic circuitry features overheating  
protection. If the critical temperature is exceeded,  
the right front and back cooking zones are switched  
back to level 7 provided they are set to level 8 or 9.  
Overheating protection  
H and 7 alternately appear in the relevant cooking  
level display areas.  
When the temperature drops below the critial  
value, the letter H disappear from the display. The  
cooking zones remain on level 7 and can be turned  
up to level 8 or 9 again if required.  
The appliance is set to automatically switch off a  
cooking zone 4 hours after the last operation.  
The cooking zone can be switched on again as  
normal.  
Holiday safeguard  
(Automatic switch-off)  
Switching on the child lock  
Child lock  
It is possible to avoid switching on the appliance  
accidentally by using the child lock.  
Note: the child lock function is de-activated when  
delivered and must be chosen in the options menu.  
(see page 23 options menu).  
The appliance must be switched on by the main  
switch and all cooking zones should be on 0.  
• Touch the rear left cooking zone on the display  
panel and keep the finger pressed.  
• Simultaneously touch the main switch. An audible  
signal is given. Remove the finger from the main  
switch first and then the finger from the cooking  
zone.  
Child lock switched on  
• The main switch symbol flashes. The cooktop can  
now not be switched on. The timer, however, is  
still operational.  
Switching off the child lock  
• Touch the rear left cooking zone on the display  
panel and keep the finger pressed.  
• Simultaneously touch the main switch. An audible  
signal is given. Remove the finger from the main  
switch first and then the finger from the cooking  
zone.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Options menu  
Using the options menu, the automatic quick-boil  
function, cooking zone extension and the child lock  
can be programmed to suit your individual needs.  
Use the symbols UP and DOWN to access the  
options menu and chose the required values.  
Use the symbol timer to store the required value.  
Use the symbol + to go through the options menu.  
Use the main switch symbol to exit the options  
menu at any time. Values which have not been  
confirmed will not be stored.  
Note: the options menu will automatically end  
without storing any values, should you stop  
operating it for more than 2 minutes.  
Options menu,  
setting the automatic quick-boil time  
Options menu, setting the automatic  
quick-boil time  
Proceed as follows:  
• Switch on the appliance by touching the main  
switch. (Note: the timer should not be activated  
and all cooking zones should be on 0.)  
• Touch symbols UP and DOWN when the cooktop  
is switched on. You will hear a signal. Keep your  
fingers pressed down until a second signal sounds  
after a few seconds and P1 lights on the timer  
display panel. Remove fingers immediately. A 04  
appears on the cooking zone display panel, i.e. a  
quick boil time of 4 minutes is stored.  
You can now touch symbols UP or DOWN and  
select a quick boil time from 1 to 15 minutes. The  
selected quick boil time applies to all cooking  
zones. The selected time (A 01 to A15) is shown  
on the cooking zone display panel and P1 flashes  
(requesting to store values).  
• Store the required option by touching the timer  
symbol You will hear a signal and P1 lights  
.
constantly.  
In order to exit the options menu touch the main  
switch. Values which have not been confirmed will  
not be stored.  
Should you require to program further functions,  
touch the symbol +.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Options menu, setting the combination feature  
front left cooking zone  
P2 flashes on the timer display panel. The symbol  
for combination feature flashes on the display of  
the front left cooking zone.  
Options menu, setting the combination  
feature front left cooking zone  
By repeatedly touching the cooking zone in the  
display panel you can choose four options:  
• the symbol for combination feature flashes:  
every time the cooking range is switched on the  
combination feature has to be activated if  
desired.  
• the symbol for the middle combination feature  
lights:  
every time the cooking range is switched on the  
middle combination feature is activated,  
however can be de-activated if desired.  
• the symbol for the large combination feature  
lights:  
every time the cooking range is switched on the  
large combination feature is activated, however  
can be de-activated if desired.  
• the symbol for the large combination feature  
lights and appears on the cooking zone  
display:  
when the cooking range is switched on the  
previously used option is activated.  
• After choosing the required option P2 flashes  
(requesting to store values).  
• Store the required option by touching the timer  
symbol  
P2 lights  
. You will hear a signal and  
constantly  
In order to exit the options menu touch the main  
switch. Values which have not been confirmed will  
not be stored.  
Should you require to program further functions,  
touch the symbol +.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Options menu, setting the combination feature  
rear cooking zones  
P3 flashes on the timer display panel. The symbol  
for combination feature flashes on the display of  
the rear cooking zones.  
Options menu, setting the combination  
feature rear cooking zones  
By repeatedly touching one of the rear cooking  
zones in the display panel you can choose three  
options:  
• the symbol for combination feature flashes:  
every time the cooking range is switched on the  
combination feature must be activated if  
desired.  
• the symbol for the combination feature lights:  
every time the cooking range is switched on the  
combination feature is activated, however can  
be de-activated if desired.  
• the symbol for the large combination feature  
lights and appears on the cooking zone  
display:  
when the cooking range is switched on the  
previously used option is activated.  
• After choosing the required option P3 flashes  
(requesting to store values).  
• Store the required option by touching the timer  
symbol  
P3 lights  
. You will hear a signal and  
constantly.  
In order to exit the options menu touch the main  
switch. Values which have not been confirmed will  
not be stored.  
Should you require to program further functions,  
touch the symbol +.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Options menu, setting the child lock  
P4 flashes on the timer display panel. The symbol  
for child lock flashes on the display of the rear left  
cooking zone. The child lock cannot be switched  
on with this setting.  
Options menu, setting the child lock  
• Touch the cooking zone rear left. A spot appears  
next to the child lock symbol. The child lock can  
be switched on with this setting if required. P4  
flashes (requesting to store values).  
• Store the required option by touching the timer  
symbol  
P4 lights  
. You will hear a signal and  
constantly.  
In order to exit the options menu touch the main  
switch. Values that have not been confirmed will not  
be stored.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Cleaning and care  
Iridiscent discoloration can be caused by the bases  
of some pots. These do not interfere with the  
operation of the glass ceramic cooktop.  
Note: to avoid jeopardising the electrical safety of  
the appliance, do not use high-pressure or steam  
jet cleaning devices – risk of short circuits!  
Please refer to the enclosed brochure for further  
notes on cleaning.  
Caution, risk of burns! Before cleaning, please  
wait until the cooktop has cooled to hand-  
warm.  
You can order our blade scraper (Order No.  
087670) and the Gaggenau glass ceramic cleaner  
(Order No. 098690) from your Gaggenau dealer.  
Please thoroughly clean the appliance before  
operating it for the first time and after every use.  
The frame of the cooktop should be cleaned  
using a soft, damp cloth and light soapy liquid or a  
commercially available stainless steel cleaner.  
Immediately remove food remains and burnt-in  
residues with the blade scraper. The blade is very  
sharp. Risk of injury! Only use the blade on the  
glass-ceramic cooktop. Do not use the blade casing  
as it may scratch the glass-ceramic.  
Clean the cooktop with a damp, soft cloth or kitchen  
paper and the Gaggenau glass ceramic cleaner or  
similar cleaner suitable for glass ceramic cooktops.  
Polish with a soft, dry cloth.  
The Gaggenau glass ceramic cleaner will coat the  
glass ceramic cooktop with a gleaming, dirt  
repellent film. This will help to preserve the  
attractive appearance of your cooktop over a long  
period of time and make it easier to clean as well.  
Do not apply the cleaner while the cooktop is still  
hot as this may cause stains. Do not use scouring  
agents, abrasives or chemically aggressive  
cleaners (for example oven cleaner)! Do not use  
any nitro polishing agents for cleaning! Do not use  
any abrasive sponges either.  
Food with a high sugar content (e.g. boiled-over  
milk, jam) can damage the surface of your cooktop.  
Immediately remove such food using the glass  
scraper.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Maintenance  
The appliance must be disconnected from the  
power supply during all repair work.  
If the appliance does not function correctly, check  
the fuses first.  
If the power supply is functioning correctly, but your  
appliance still does not work, please contact your  
Gaggenau dealer who will provide you with the  
address and telephone number of your nearest  
manufacturer’s authorized service agent or contact  
Gaggenau USA on (800) 828-9165. Specify the  
appliance type (see rating plate).  
Repairs may only be carried out by authorised  
technicians, in order to guarantee the safety of the  
appliance.  
Unauthorised tampering with the appliance will  
invalidate any warranty claims.  
Only ever use original spare parts.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. Remedying slight malfunctions yourself  
Not every malfunction can be ascribed to a defect  
If you are not successful in remedying the fault with  
of your cooker. If your appliance should not function the aid of the list below, then contact your  
properly, search for the fault in the list below.  
Gaggenau after-sales service.  
Fault  
The appliance cannot be  
switched on.  
Possible cause  
Remedy  
Check the domestic fuse.  
Remove objects.  
No electricity.  
Objects lie on the control panel.  
The appliance cannot be  
switched on, the main  
switch symbol blinks.  
The child lock is switched on.  
Switch off the child lock.  
Both right cooking zones  
are switched back to level 7.  
H blinks on the cooking level  
display.  
The overheating protection has  
been triggered.  
It is possible to use the  
remaining cooking zones.  
After cooling down the  
complete cooktop can be  
used once again.  
A cooking zone switches off  
after operating for a longer  
period of time.  
The holiday safeguard is set to  
automatically switch off a cooking zone  
4 hours after the last operation.  
Switch the cooking zone on  
again as usual.  
No reaction from the cooktop. Extremely excessive voltage in the  
mains, e.g. caused by lightning.  
Isolate the appliance from  
the for 30 sec by switching  
off the domestic fuse.  
Clean control panel. Always  
keep the control panel clean.  
Touch the main switch again.  
Control panel is soiled.  
The main switch was not touched  
long enough.  
The display panel lights, a  
spot lights constantly on  
the timer display panel,  
however the cooking zone  
does not heat up.  
The appliance is on  
show room mode.  
Disconnect the appliance  
from the power supply.  
Reconnect the appliance and  
within 3 minutes carry out the  
following procedure: Touch  
the + symbol and keep the  
finger pressed down. Touch  
the main switch until you  
hear a signal. Immediately  
remove your finger from the  
main switch and then release  
the + symbol.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Installation  
Electrical connection  
Technical Data  
The appliance must only be connected by an  
authorised specialist.  
Total connected load: 8680 W  
All corresponding regulations must be observed.  
Important notes on installation  
Pay attention to the "Important notes" on page  
3 and 4.  
Pay attention to the data on the rating plate. The  
appliance must be properly grounded. Connect the  
connecting cable to the mains.  
The appliance must only be connected by an  
authorised specialist, paying attention to the  
relevant regulations of the power supply companies  
and the regional construction regulations.  
When connecting electrical appliances in the  
proximity of cooking surfaces, make sure that  
connecting cables do not come into contact with hot  
cooking surfaces.  
The installation technician is responsible for the  
correct functioning of the appliance at the place of  
installation. He must instruct the user on how to  
disconnect the appliance from electricity in an  
emergency.  
This appliance may be installed in kitchen  
combinations made of wood or similar combustible  
materials without taking additional measures.  
The built-in furniture and worktop where the  
appliance is installed must be heat resistant up to  
temperatures of 200° F/90° C.  
If the range is not installed over a built-in cooker,  
protection against hazardous contact from below  
must be ensured after assembly, e.g. by installing  
an intermediate shelf that can only be detached  
using a tool. The distance between the  
intermediate shelf and the worktop in which the  
range is recessed must be at least 60 mm (23/8 ).  
There must be a gap of at least 20 mm ( 34 ) at each  
side between the appliance and any flammable  
walls or furnishings.  
If all poles of the appliances cannot be isolated  
from the mains by removing an accessible plug, an  
isolating device with a contact gap of at least 3 mm  
must be installed (e.g. domestic fuse).  
No warranty claims can be lodged for any  
damage resulting from failure to observe these  
instructions.  
Subject to technical change without notice.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The minimum spaces that must be maintained  
between the appliance cooking surface and the  
horizontal surface above the cooking top shall be:  
A = 30 inches (762 mm) minimum clearance  
between the top of the cooking surface and the  
bottom of an unprotected wood or metal cabinet; or  
A = 24 inches (600 mm) minimum when bottom of  
wood or metal cabinet is protected by no less than  
1/4-inch-thick flame-retardant millboard covered  
with no less than No. 28 MSG sheet steel,  
2
A
4
1
0.015-inch-thick stainless steel, 0.024-inch-thick  
aluminimum, or 0.020-inch-thick copper.  
3
If an electrically heated warming tray is provided  
on the back guard of a counter level range, the  
dimension shall be A = 30 inches (762 mm).  
5
WARNING  
If installing between two parallel side walls or  
cabinets, the wall or cabinets should be spaced at  
least 4 inches (100 mm) apart to reduce the risk of  
ignition of surrounding combustible materials.  
1 Building back wall  
2 Top building cabinet  
3 Cooking surface  
4 Building side wall  
5 Building side wall  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The appliance is installed in a base cabinet with a  
width of more than 900 mm (35 7/16 ).  
Installation  
1
8''  
/
201  
(520)  
311  
2''  
2''  
)
/
/
• Produce the recess for the cooktop in your  
worktop. Proceed as indicated on the installation  
sketch.  
(3)  
1
4''  
/
1
800  
(
(31)  
3
6''  
6)  
11  
1
/
Note: the cooktop must not be stuck onto the  
(4  
worktop with silicone.  
7
8''  
/
16''  
)
7
min.13  
(min. 3  
/
• Insert the cooktop with the control panel front  
right into the cut-out and align it.  
(200)  
0
3
/
16'' ±  
9
32  
19 5  
2,5  
/
)
0±  
• Secure the appliance on the worktop with the  
clamping screws included. Fasten the clamping  
screws as marked by the black arrows in the  
picture. The dotted arrows show alternative fixing  
points if required by the installation conditions.  
(4  
3
/
2
32'' ±  
3
3023  
''  
/
)
,5  
2
0±  
min. 2  
)
0
8
(7  
(min. 5  
16''  
. 39  
in  
(min. 90)  
/
m
Note:  
During installation be careful that the front right  
clamping screw is fitted to the worktop front side, as  
fitting the clamping screw to the side can damage  
the appliance base. Do not tighten the clamping  
screws too tightly, as a uniform sealing gap should  
be left all round.  
• Connect the appliance to the electricity.  
Check the appliance works correctly.  
Removal of the cooktop  
Disconnect the appliance from the electricity. Undo  
all the clamping screws. Carefully push out the  
appliance by the metal base from below.  
Note:  
Do not try to lever the cooktop out of the worktop  
cut out using a tool.  
worktop  
front  
5080006411 en 01.03 EB  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GAGGENAU HAUSGERÄTE GMBH  
CARL-WERY-STR. 34 · 81739 MÜNCHEN  
GERMANY  
5551 McFADDEN AVENUE  
HUNTINGTON BEACH, CA 92649  
USA  
Y (089) 45 90-03  
Y (800) 828-9165 · FAX (714) 901-0979  
FAX (089) 45 90-23 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Echo Pole Saw PPT 2100 2400 User Manual
Exido Kitchen Grill 243 045 User Manual
Exmark Lawn Mower Metro 21 Series User Manual
Extron electronic Network Router VNR 100 User Manual
Fisher Price Automobile Parts 73180 User Manual
Fisher Price Baby Monitor V4340 User Manual
Fisher Price Bicycle N6021 User Manual
Freestyle Watch FS80963 User Manual
FujiFilm Digital Camera 16000480 User Manual
Fujitsu Laptop P2110 User Manual