N6021
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Tools required for assembly: Phillips Screwwddrriivveerr,,
Hammer and Scrap Block of Wood (not included).
Age: 2-5 years
Weight limit: 55 lbs (25 kg).
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
PUSH
Straight Axle Assembly
Seat
Frame
3
Bottom View
• Turn the frame upside down.
1
• Insert the straight axle assembly through the holes in the
rear of the frame.
• Fit the seat onto the frame.
• Push firmly near the back end of the seat to "snap" it
into place.
Wheel
(Flat Side First)
.354"
Bushing
(Grooved Side Down)
Straight Axle
Rear
Wheel
Bushing
(Indented
Side Down)
(Smooth Side First)
Wheel Hub
Wheel Hub
(Pointed End First)
(Flat Side Down)
4
• Turn the assembly upright.
• Slide a bushing, smooth side first, onto the end of the
straight axle.
• Slide a wheel, flat side first, onto the end of the straight axle.
• Slide a wheel hub, pointed end first, onto the end of the
straight axle.
Straight
Axle
Straight
Axle
Cap Nut
2
• Place one end of the straight axle into the cap nut. Tap
the end of the straight axle with a hammer. Make sure
the cap nut is securely attached to the straight axle.
• Slide a wheel hub, flat side down, onto the straight axle.
• Slide a rear wheel, indented side down, onto the
straight axle.
• Slide a bushing, grooved side down, onto the straight axle.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Pedal Hub
Pedal Axle Tab
.354"
Pedal Hub
7
• Fit two pedal hubs onto the pedal axle tabs. Make sure
the tabs fit into the slot in each pedal hub.
• While holding the pedal hubs on the pedal axle, insert the
pedal axle into the hole in the center of the front wheel.
• Press the pedal hubs into the center of the front wheel
until they are flush with the surface of the front wheel.
• Repeat this procedure on the other side with the other
two pedal hubs.
5
• Fit the cap nut on the end of the straight axle.
• Tap the cap nut with a hammer. Gently pull the rear
wheel to be sure the cap nut is securely attached to
the straight axle.
Fork Arms
Hint: You may need the help of another adult to hold the
other end of the straight axle in place.
Front Wheel
Assembly
Groove
Fork Cover
Pedal Axle
8
• Place the front wheel assembly between the fork arms.
Make sure the pedal axle fits into the groove at the bottom
of each fork arm.
Wheel Hub
• Place a fork cover over the pedal axle on one fork arm.
• Insert two #8 x ¾" screws into the fork cover and tighten.
• Repeat this procedure to attach the other fork cover to the
other fork arm.
Wheel Cap
6
• Fit the tabs on the wheel cap into the slots in the wheel
hub. Push to "snap" the wheel cap in place.
• Repeat this procedure to attach the other wheel cap to
the other wheel hub.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Label Decoration
Consumer Information
• Periodically, check the plastic parts and if broken or
cracked, dispose of them properly.
• Periodically, check all fasteners regularly to be sure they
are tight. If the fasteners are not tight, tighten them
as necessary.
• To clean, use a mild soap and water solution and a clean
cloth. Rinse clean with water to remove soap residue.
4
IMPORTANT! It is a good practice to start training children
very young regarding the importance of helmet use. When
children are older and riding bicycles and faster vehicles,
it is important that they use a helmet each and every time
they ride. For this reason, even while riding a tricycle, it is
a good idea to familiarize your child with helmet use,
so that it becomes a habit for life. Choose a helmet that
complies with requirements of the applicable certifying
agency for bicycle helmets.
2
6
1
Right Side
TNCE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
7
3
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
5
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
Left Side
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
• Wipe the vehicle with a clean, dry cloth to remove any
oils before applying labels.
• Apply labels exactly as shown in the illustrations. For
best results, avoid repositioning the label after it has
been applied.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
• Starting at the center of a label rub firmly with a dry cloth,
and smooth towards the outer edges to remove air bubbles.
Kawasaki trademarks used under license to Fisher-Price, Inc.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2010 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc., unless otherwise indicated.
PRINTED IN MEXICO
N6021a-0920
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Fork Post
Fork Post
Handlebar Front
Handlebar Back
¾" Screw
¾" Screw
2¼" Screw
Fork Cover
9
• Insert the fork post up through the hole in the neck of the
frame. Make sure the fork is positioned so that the fork
covers face the rear wheels.
10
• Fit the handlebar front to the fork post.
Hint: The handlebar front is designed to assemble to the
fork post one way.
• Fit the handlebar back to the fork post and handlebar
front. Hold them together firmly.
• First, insert the remaining #8 x ¾" screws through the
outer holes in the handlebar back and tighten.
• Then, insert the #8 x 2¼" screw through the center hole
in the handlebar back and tighten.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
|